V TILATED ENFAÇADE SYSTEM

SEPT/2011

High energy efficiency Increased fire resistance Natural ventilation and water permeability High level of noise insulation Fast mounting and easy maintenance Perfect design and outlook

MAIN ADVANTAGES OF THE VENTILATED FAÇADE SYSTEMS

ETEM VENTILATED SYSTEMS ARE DEVELOPED TO ASSURE THE SAFE MOUNTING OF DIFFERENT CLADDING MATERIALS TO THE CONSTRUCTION BASE OF THE BUILDING.

�e basic principles in developing the Bravo system are securing a gap of 4 to 8 cm between the façade material and the thermal insulation for optimal ventilation effect, the free movement of each element in accordance to its own coefficient of thermal expansion and the overtaking of dynamic loads.

�e main elements of the system are designed after preliminary simula-tion of the maximum loads and deflections. �us the optimal design to assure high stability of the construction is achieved.

Bravo is the optimal solution forlarge and at façades, assuring fast and secure mounting of the composite panel cassettes and optimal behaviour to the thermal expansion of the composite panel.

ETEM unique design combines the main supportingprofiles with L-shaped wall brackets. There are over 30 types of wallbrackets in lengths of 40 to 300 mm that assure alignment of the façadematerial overcoming the roughness and inaccuracy in the construction base.

BRAVO SYSTEM ISDESIGNED FORINSTALLATION OFCOMPOSITE MATERIALSAND METAL SHEETSBY USING THE MOSTSUCCESSFUL PRINCIPLEOF HANGED PANELS.

Distance between wall and façade material using main supporting profile 21895

Distance between wall and façade material using main supportingprofile 21958

Distance between wall and façade material using main supporting profile 33413

ETEM ventilated façade systems possess certificates for each system as a whole and for each single element of the substructure as well. The choice of ETEM as a supplier is additionaly ensured by a system guarantee and risks insurance by Allianz for over 1 million Euro.

fixing bracket

mainprofiles

accessories

fasteningelements

SYSTEM PROFILES AND ACCESSORIES

code

code

SYSTEM PROFILES AND ACCESSORIES

07 vario 07 40 1, 48 148 0,945 94,5 0,945 94,5

07 vario 08 75 1,045 10 4,5 0,945 94,5 0,945 94,5

07 vario Q10 100 1 100 0,945 94,5 0,945 94,5

07 vario Q17 125 0,5 50 0,945 94,5 0,945 94,5

07 vario Q15 150 0,6 60 0,945 94,5 0,945 94,5

07 bravo 01 65 0,6 60 0,945 94,5 0,945 94,5

forte 71121 105 3 300 3,5 350 3,5 350

07 vario Q18 180

07 vario Q21 210

kN kg kN kg kN kg

load of weightlenghtL (mm)

fixingbrackets

wind load – suction wind load – pressure

>_