Versatile and simple Indoor Lighting Controls for single-room ...Thorn’s Indoor Lighting Controls...

ControLiteDIMVersatile and simple Indoor Lighting Controls for single-room applications

�

Introduction

1 2 3

Thorn’s Indoor Lighting Controls portfolio is grouped into three distinct usage types

1 SensaLite features Thorn luminaires with built-in sensors, and remote sensors, offering standard presence detection, daylight linking and infra-red control. SensaLite is the first step to comfort and energy saving, and is used for small office applications, simple classrooms, corridors etc.

2 ControLiteDIM is used for mid-sized projects (1 room): The portfolio consists of modules for creating scene setting, enabling daylight linking and integrating presence detection. It is easy to commission by the contractor: When wiring the system, the luminaires are allocated to the switches, scene plates and presence detectors.

3 SensaLink builds on the features of SensaLite by adding scene setting and the possibility to link sensors, enabling it to provide a linked lighting management system for larger-sized projects and those requiring greater levels of comfort.

�

Application ➦ School & Education (class rooms)

Single Offices

Board & Seminar rooms

Sport & Leisure

Retail Health Industry

Function

Presence detection • • ( • ) • • •

Daylight-link • • • • •

Scene setting • • • • •

Dimming and Switching • • • • • • •

How does ControLiteDIM support the Thorn PEC strategy?

Performance: ControLiteDIM has no influence on the visual performance - that is what the Thorn luminaires will offer you!

Efficiency: ControLiteDIM is a perfect tool to provide you with an efficient light – it enables you to dim the luminaires, link the luminaires to your presence and link them to the incoming daylight to achieve energy saving.

Comfort: Scene setting, manual dimming and presence detection are features of ControLiteDIM making your light solution very comfortable.

Where to use ControLiteDIM?

Typical applications are: • Single-rooms requiring simple

and intuitive scene setting, e.g. board rooms,

• Larger one-room applications requiring manual control and daylight-linking, e.g. call centers. Examples are:

• The ControLiteDIM-Scene module is an optional add-on to the -Basic module and enables you to create up to 4 scenes. Works in conjunction with simple standard momentary action switches, or the more intuitive and user-friendly ControLiteDIM scene plates.

• The ‘heart’ of the ControLiteDIM offer is the ControLiteDIM-Basic module. This enables you to brighten or dim up to three groups of luminaires each incorporating up to 100 DSI devices (most commonly ballasts) via presence detectors and momentary action switches (also called Retractive or Push-to-Make switches).

• The ControLiteDIM-Daylight module is a further optional add-on to the -Basic module and enables you to link the � groups of luminaires to the incoming daylight.

ControLiteDIM

4

*

*

**

*

*

* *

* *

DSI DSI DSI DSI DSI DSI

DSI DSI DSI

All I II III

All I II III All I II III

iX

Daylight sensor

II I III

DSI

Mains

Presence detectors allocated to luminaire groups

*'common' connection for switches or detectors respectively *'common' connection for switches or scene plates or detectors respectively


Luminaire groups


* 'common' connection for switches or detectors respectively

Luminaire groups


* 'common' connection for switches or scene plates or detectors respectively

Luminaire groups

Luminaire groups

Scene Plate Slave

Scene Select Plate

Momentary action switches allocated to luminaire groups

All I II III

All I II III

N L

II I III

MainsMomentary action switches allocated to luminaire groups

All I II III

Momentary action switches for Scenes

Momentary action switches allocated to luminaire groups Momentary action switches for Scenes

1 2 3 4 N L

II I III

Mains

iX ... Intelligent Extension

All I II III

1 2 3 4 N L

II I III iX

N

Daylight sensor

All I II III

Mains

L

DSI DSI


iX

S4

L4

X1

X2

S3

L3

S2

L2

S1

L1

com Sx: push to make switch scene

Lx: scene indication output

Ta: 0...50°C

ControLiteDIM-Scene

22 154 256

use only in combination with

THORN ControLiteDIM-Basic

Benefit 1 - modularity

Option 1 ControLiteDIM-Basic:

• Manual dimming and switching of � luminaire groups - all together or individually

• Up to 100 DSI ballasts per luminaire group

• Presence-linked switching of these � luminaire groups - all together, individually or � together and the �rd individually.

Maximum line lengths:

• DSI control wires up to �50m, using standard mains wiring � x 1.5mm² (solid or stranded conductors), e.g.H05VV-U*

• Momentary action switch wires up to 100m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*

* harmonised standard �00/500V cable, PVC insulated and sheathed, with solid conductors

ControLiteDIM is a controls portfolio you can adapt to the application – a tailor made flexible solution. You just take the components for the features you need and connect them to your luminaires:

5

Option 2

ControLiteDIM-Basic plus ControLiteDIM-Scene:

Like Option 1, but additionally:

• Scene setting (4 lighting scenes)

• Scenes either called up with standard momentary action switches or more intuitive with the ControLiteDIM wall scene plates:

• The Wall Scene Select Plate enables you to switch on, switch off and change the light level of the � luminaire groups individually or all together, and to create and call up 4 scenes (one usually used for Off).

• The Wall Scene Plate Slave enables you to call up 4 scenes.

• Both plates indicate the active scene via status lights.

*

*

**

*

*

* *

* *


DSI DSI DSI

All I II III


iX

Daylight sensor

II I III

DSI

Mains




Luminaire groups



Luminaire groups



Luminaire groups

Luminaire groups

Scene Plate Slave

Scene Select Plate


All I II III

All I II III

N L

II I III


All I II III



1 2 3 4 N L

II I III

Mains


All I II III

1 2 3 4 N L

II I III iX

N

Daylight sensor

All I II III

Mains

L

DSI DSI


iX

S4

L4

X1

X2

S3

L3

S2

L2

S1

L1



Ta: 0...50°C

ControLiteDIM-Scene

22 154 256




• DSI control wires up to �50m, using standard mains wiring � x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


• Scene plate wires up to 100m, using 4 (Scene Select Plate) or � (Scene Plate Slave) standard 6x 0.�mm² wiring, e.g. burglar alarm cable

• iX wires up to10m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


6

*

*

**

*

*

* *

* *


DSI DSI DSI

All I II III


iX

Daylight sensor

II I III

DSI

Mains




Luminaire groups



Luminaire groups



Luminaire groups

Luminaire groups

Scene Plate Slave

Scene Select Plate


All I II III

All I II III

N L

II I III


All I II III



1 2 3 4 N L

II I III

Mains


All I II III

1 2 3 4 N L

II I III iX

N

Daylight sensor

All I II III

Mains

L

DSI DSI


iX

S4

L4

X1

X2

S3

L3

S2

L2

S1

L1



Ta: 0...50°C

ControLiteDIM-Scene

22 154 256



Benefit 1 - modularity

Option 3

ControLiteDIM-Basic plus ControLiteDIM-Daylight:

Like Option 1, but additionally:

• The daylight-dependent control of the � luminaire groups, reacting to incoming daylight and dimming each luminaire group individually to the specified light level:

• The system uses only one unobstrusive photocell, mounted to the ceiling and directed to the window instead of one cell per luminaire group.

• At any time you are able to shift the different daylight-linked light levels of the luminaire groups manually, the daylight-link will remain activated, considering your changes. After switching off/on the luminaire groups, the original settings will be recalled.


• DSI control wires up to �50m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


• iX wires up to 10m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*

• Daylight sensor wires up to 100m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


Push buttons for programming the required light level

Rotary switch to define which of the � luminaire

groups should be daylight-linked: 1, �, �, 1+�, 1+�,

�+�, all �

�

*

*

**

*

*

* *

* *


DSI DSI DSI

All I II III


iX

Daylight sensor

II I III

DSI

Mains




Luminaire groups



Luminaire groups



Luminaire groups

Luminaire groups

Scene Plate Slave

Scene Select Plate


All I II III

All I II III

N L

II I III


All I II III



1 2 3 4 N L

II I III

Mains


All I II III

1 2 3 4 N L

II I III iX

N

Daylight sensor

All I II III

Mains

L

DSI DSI


iX

S4

L4

X1

X2

S3

L3

S2

L2

S1

L1



Ta: 0...50°C

ControLiteDIM-Scene

22 154 256




• DSI control wires up to �50m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


• Scene plate wires up to 100m, using 4 (Scene Select Plate) or � (Scene Plate Slave) standard 6x 0.�mm² wiring, e.g. burglar alarm cable

• iX wires up to 10m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*

• Daylight sensor wires up to 100m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


Option 4

ControLiteDIM-Basic plus ControLiteDIM-Scene plus ControLiteDIM-Daylight

• This option offers you all the ControLiteDIM features together.

• With the switches or via the presence detection the system is switched on and the daylight-link is activated.

• As soon as you call up one of the 4 scenes the daylight-link is deactivated and the scene you asked for is activated.

• The daylight-link is reactivated after the whole system has been switched off and on again – either manually via a momentary action switch, or automatically via a presence detector, allocated to all � luminaire groups.

�

Benefit 2 - easy to Install

ControLiteDIM is really easy to install and configure:

• When wiring the system, the � groups of Thorn HFD luminaires (incorporating DSI ballasts) are allocated to the switches, scene plates and presence-detectors.

• To configure the scenes you just dim the � luminaire groups to the light levels you require for your different tasks and activities. As soon as you are happy with the created scene you store the setting to one of the scene buttons on the scene plate or the momentary action switch connected to the ControLiteDIM-Scene module, by holding it for 10 seconds until the lights confirm. (In principle you do the same with the program buttons of your car radio.)

• For the daylight-link you install the photocell LSD to the ceiling, in the direction of the window. This sensor is connected to the ControLiteDIM-Daylight module. To set the automation you simply follow these two steps:

1. During the day you set the � luminaire groups to the required individual light levels via the momentary action switches. Then you press the ‘Day System Point’ button on the module for 5 seconds until the lights confirm.

�. During twilight you set the � luminaire groups again to the required individual light levels via the momentary action switches. This time you press the ‘Twilight System Point’ button on the module for 5 seconds until the lights confirm.

You are also able to define which of the � luminaire groups should be daylight- linked, one, two or all three.

0% 25% 50%

500lux

Artificial lightDaylight

That’s it! No additional commissioning is necessary – so you can do it on your own, without hiring a commissioning engineer or without any specialist training.

�

Regarding installation you will benefit from polarity free connections and the possibility to use standard leads:

• DSI control wires up to �50m, using standard mains wiring �x1.5mm² (solid or stranded conductors), e.g. H05VV-U*

• Momentary action switch wires up to 100m, using standard mains wiring �x1.5mm² (solid or stranded conductors), e.g. H05VV-U*

• Scene plate wires up to 100m, using 4 (Scene Select Plate) or � (Scene Plate Slave) standard 6x 0.�mm² wiring, burglar alarm cable

• Daylight sensor wires up to 100m, using standard mains wiring �x1.5mm² (solid or stranded conductors), e.g. H05VV-U*

• iX wires between control modules up to 10m, using standard mains wiring �x 1.5mm² (solid or stranded conductors), e.g. H05VV-U*


10

* *

*III III

NL

Mains

dim/on/off buttons

Presence Detector all groups

iX intelligent extension

DSI group 1

* 'common' connection for scene plate or detector respectively

DSI group 2

DSI group 3

Sceneindicatorlights

Scene buttons

Downlight

Suspended Luminaire

Application - Board Room

A typical application where you would use ControLiteDIM is a board room. In the following example the requirements are:

• Control of � luminaire groups (�x � suspended, 1x 4 downlights)

• Presence detection room-wide (passive infra-red)

• 4 scenes via scene plate

11

How ControLiteDIM works in this application example

You have a meeting with customers and enter the board room.

• The presence detector detects you, and (as this detector is connected to the presence detector inputs of the ControLiteDIM-Basic) all three luminaire groups are switched on (light level 100%).

• With everybody seated you wish to make a presentation using your laptop and a digital projector. Therefore you call up scene � via the scene plate. This scene was created by you in such a way that the � luminaire groups reduce their light levels: You have chosen that the suspended luminaires next to the screen are on a very low light level, and the others stay on a level that still allows you and your guests to write and to see each other.

• For the coffee break you change the scene to �, and the luminaires return to a higher level. During the set up of this scene you decided that the room is lit mainly by the downlights to create a comfortable atmosphere.

• You leave the room: Now you may either switch off the lighting by calling up scene 0 (off), or the presence detector will do that for you after its internal time out.

• If you return into the room after you switched the lighting off using the scene plate and before the presence detector’s time out, you just call up a different scene to get light back. Otherwise see above.

• At any time you are able to alter the light settings and scenes temporarily via the dimming buttons on the scene plate: You can either change the level of each group individually or of all groups together.

1�

*

*

NMains

L

Photocell looking to window

* 'common' connection for switch or detector respectively

Switch all groups

DSI group 3

iXIIIIII

DSI group 2

DSI group 1

DSI group 3

DSI group 2

DSI group 1

Presence Detector all groups

Row of suspended luminaires

Application - Class Room

1�

Another typical application example for ControLite DIM is a class room. The project shown here has the following requirements:

• Control of � luminaire groups (rows)

• Presence detection room-wide (microwave)

How ControLiteDIM works in this application example

• The presence detector detects you entering the room; all three luminaire groups would switch on. Each of the luminaire groups would respond individually to the light level that you have defined when commissioning the ControLiteDIM-Daylight. This module uses the ceiling mounted light sensor LSD to measure the incoming daylight.

• At any time it is possible to alter the light settings temporarily via the momentary action switch, which is installed next to the door and is used to switch off/on and dim all � luminaire groups together.

• If the room is vacated without anybody switching off the light manually, the presence detector would switch off the light after its internal time out.

• In the case of somebody returning before the detector’s time out, the light would remain on the level that was set before – either manually with the momentary action switch or automatically via the daylight-link.

• Daylight-link

• 1 switch for room-wide manual override (dim/on/off)

14

Product details

ControLiteDIM-Basic 22154254

The ControLiteDIM-Basic module is the basis of the ControLiteDIM product range. The three output channels can be controlled individually or togther, each operating up to 100 DSI devices. No programming is required during installation. Switches can be connected to the switch inputs of the ControLiteDIM-Basic (one input per group): these can be standard momentary action switches, e.g. continental style retractive (Push-to-Make) switches. UK style centre off retractive switches are available as accessories (see below). Any number of momentary action switches can be connected in parallel. Additionally the ControLiteDIM-Basic has � inputs (one input per group) for presence detectors with potential-free contacts, offering the possibility to switch the three groups separately over � detectors, or to switch two or all groups together via 1 detector. For that purpose it is necessary to bridge the corresponding presence detector inputs. Suitable PIR and Microwave presence detectors are available separately. Several presence detectors can also be connected in parallel to the presence detector inputs. The ControLiteDIM-Basic module contains the central power supply for all three ControLiteDIM modules. Connection via screw terminals, housing made of flame-resistant polycarbonate, halogen-free, suitable for installation in switch or distribution cabinets on �5mm DIN rail. Permitted ambient temperature 0...50°C. Degree of protection IP�0. Width �0mm (4 units), height �0mm, depth 5�mm. Weight �40g.

CONTROLITE MRE CDD 96100113

Passive Infra-red Detector (PIR), working by presence detection. To be connected to one or more of the PD (presence detector) inputs of the ControLiteDIM-Basic module, switches all the luminaires allocated to the PIR via the ControLiteDIM-Basic module. Recessed mounted into suspended ceilings (hole diameter 4�...45mm, ceiling void 150mm). Detection zone diameter = �.4x ceiling height (max. height 4m). Time delay �...��min adjustable. Volt-free contact.

CONTROLITE MSF CDD 96100114

Passive Infra-red Detector (PIR), working by presence detection. To be connected to one or more of the PD (presence detector) inputs of the ControLiteDIM-Basic module, switches all the luminaires allocated to the PIR via the ControLiteDIM-Basic module. Surface mounted onto ceiling. Detection zone diameter = �.4x ceiling height (max. height 4m). Time delay 4, �, 16 or ��min adjustable. Volt-free contact.

at a glance guide

70 59

3590

15

CONTROLITE MRE CDDM 96100140

Microwave Detector working by presence detection and offering a high performance: The sensor detects small movements over a long �0 metres distance. On maximum sensitivity this unit is extremely sensitive to movement and may detect through thin walls or partitions (e.g. glass). To be connected to one or more of the PD (presence detector) inputs of the ControLiteDIM- Basic module, switches all the luminaires allocated to the Microwave sensor via the ControLiteDIM-Basic module. Wall or flush mounted. Detection zone range 1...�0m adjustable, diameter 6m. Time delay 15s...�0min adjustable. Volt-free contact.

CONTROLITE CDMS1 96100125



With the ControLiteDim Centre off retractive switch you are able to control the light level of all the luminaires allocated to the switch via the ControLiteDIM-Basic module: brighter or dimmer. To be connected to the ControLiteDIM-Basic module switch inputs. 1 Gang, � Gang or � Gang switch plate, white.

ControLiteDIM-Scene 22154256

The ControLiteDIM-Scene module enables the recall and programming of four light scenes. Used as an expansion to the ControLiteDIM-Basic module. The switch inputs are SELV and any push to make switches can be used, especially the ControLiteDim Scene Select Plates (up to � in parallel). Connection via screw terminals, housing made of flame-resistant polycarbonate - halogen-free, suitable for installation in switch or distribution cabinets on �5mm DIN rail. Permitted ambient temperature 0...50°C. Degree of protection IP�0. Width �0mm (4 units), height �0mm, depth 5�mm. Weight 140g.

70 59

3590

96100115 + 96100119

CONTROLITE CDSSM 96100115

Three scenes can be recalled by depressing the appropriate button “1”, “�”, “�”, and “0” for OFF on the wall mounted Scene Select Plate. These scene buttons have to be connected to the ControLiteDIM-Scene module switch inputs. There are also buttons to raise and lower the light level of three luminaire groups individually or all together. These three luminaire groups are allocated to the raise and lower buttons via the ControLiteDIM-Basic module. The buttons have to be connected to the ControLiteDIM-Basic module switch inputs. Cover plate ordered separately. To be mounted into UK standard double back box (not supplied) for sinking in (min. box depth �0mm) or dry-line plasterboard walls.

CONTROLITE CDSSM BR POL COVER 96100117 Cover plate for ControLiteDim Scene Select Plate. Finished in polished brass.

CONTROLITE CDSSM BR SA COVER 96100118 Cover plate for ControLiteDim Scene Select Plate. Finished in satin brass.

CONTROLITE CDSSM NI SA COVER 96100119 Cover plate for ControLiteDim Scene Select Plate. Finished in satin nickel.

CONTROLITE CDSSM WHI COVER 96100120 Cover plate for ControLiteDim Scene Select Plate. Finished in white.

Cover size: �5 x 145mm

16

Product details

CONTROLITE CDSSS 96100116

Three scenes can be recalled by depressing the appropriate button “1”, “�”, “�”, and “0” for OFF. These scene buttons have to be connected to the ControLiteDIM-Scene module switch inputs. Cover plate ordered separately. To be mounted into UK standard back box (not supplied) for sinking in (min. box depth �0mm) or dry-line plasterboard walls.

CONTROLITE CDSSS BR POL COVER 96227296 Cover plate for ControLiteDim Scene Plate Slave. Finished in polished brass.

CONTROLITE CDSSS SA BR COVER 96100121 Cover plate for ControLiteDim Scene Plate Slave. Finished in satin brass.

CONTROLITE CDSSS SA NI COVER 96100123 Cover plate for ControLiteDim Scene Plate Slave. Finished in satin nickel.

CONTROLITE CDSSS WHI COVER 96100124 Cover plate for ControLiteDim Scene Plate Slave. Finished in white

Cover size: �5 x �5mm

17.5

59

3590

ControLiteDIM-Daylight 22154255

The daylight information will be passed on from the ControLiteDIM-Daylight module to control up to three luminaire groups daylight linked. Used as an expansion to the ControLiteDIM-Basic module. Simple programming of the Control characteristic system points for each of the three luminaire groups individually. Daylight sensor for measuring the incoming daylight ordered separately. Connection via screw terminals, housing made of flame-resistant polycarbonate - halogen-free, suitable for installation in switch or distribution cabinets on �5mm DIN rail. Permitted ambient temperature 0...50°C. Degree of protection IP�0. Width 1�mm (1 unit), height �0mm, depth 5�mm. Weight 60g.

LSD DAYLIGHT SENSOR 96111028

Ceiling-mounted sensor for measuring the daylight entering the room through the window; incorporating a slide switch for switching to a higher sensitivity (from 0…5000lx to 0…1000lx). To be connected to the ControLiteDIM-Daylight module, using standard installation material, connection by means of screw terminals, polarity-free. Case constructed from fire resistant polycarbonate, halogen free, suitable for ceiling installation; degree of protection IP�0, protection class II, ambient temperature 0…50°C.

80

24

30˚

at a glance guide

96100116 + 96100123

1�

PDAX 500VA 22154307

Phase dimmer / Reverse phase dimmer (automatic load detection), controllable via the DSI signal of the ControLiteDIM-Basic, for continuous dimming of ohmic light sources, LV halogen lamps with magnetic or electronic transformers. A total connected load of 40 to 500VA can be operated. Dimming range 1...100%. Connection via screw terminals, housing made of flame-resistant polycarbonate – halogen-free, suited for luminaire installation or ceiling recess, admissible ambient temperature of 0...60°C (max. �00VA) / 0...45°C (max. 500VA). Degree of protection IP�0. Size 16�x4�x�1mm. Weight �00g.

L L1

L1

NN

ND1

PDAX 500VA

230/240V, 50/60Hz

40....500VAHV

40....500VALV

D2

L L1

L1

NN

ND1

PDAX 500VA

D2

40....500VALV

a b c

Magnetic transformer

Mains

Magnetic transformerL L1

L1

NN

ND1

PDAX 500VA

D2

230/240V, 50/60Hz

a, b, c: DSI output of ControLiteDIM-Basic, with up to 100 DSI devices per output


HVLV40....1000VA

LV

a b c


Mains


L

L

L1 N

N

PEN

D1

PDAS 1000VA

D2

40....1000VA

L

L1 N

N

D1

PDAS 1000VA

D2

40....1000VA

L

L1 N

N

D1

PDAS 1000VA

D2

230/240V, 50/60Hz

LV (12V, 20...150A)

Max. 2m

DSI output of ControLiteDIM-Basic, with up to 100 DSI devices per output

L

ND1D2

TE one4all

L

PEN

D1D2

PDAS 1000VA 22154306

Phase dimmer / Reverse phase dimmer (automatic load detection), controllable via the DSI signal of the ControLiteDIM-Basic, for continuous dimming of ohmic light sources, LV halogen lamps with magnetic or electronic transformers. A total connected load of 40 to 1000VA can be operated. Dimming range 1...100%. Connection via screw terminals, housing made of flame-resistant polycarbonate - halogen-free, suitable for installation in switch or distribution cabinets on �5mm DIN rail. Permitted ambient temperature 0...40°C. Degree of protection IP�0. Width 105mm (6 units), height �0mm, depth 5�mm. Weight 400g.

L L1

L1

NN

ND1

PDAX 500VA

230/240V, 50/60Hz

40....500VAHV

40....500VALV

D2

L L1

L1

NN

ND1

PDAX 500VA

D2

40....500VALV

a b c


Mains


L1

NN

ND1

PDAX 500VA

D2

230/240V, 50/60Hz



HVLV40....1000VA

LV

a b c


Mains


L

L

L1 N

N

PEN

D1

PDAS 1000VA

D2

40....1000VA

L

L1 N

N

D1

PDAS 1000VA

D2

40....1000VA

L

L1 N

N

D1

PDAS 1000VA

D2

230/240V, 50/60Hz

LV (12V, 20...150A)

Max. 2m


L

ND1D2

TE one4all

L

PEN

D1D2

1�

L L1

L1

NN

ND1

PDAX 500VA

230/240V, 50/60Hz

40....500VAHV

40....500VALV

D2

L L1

L1

NN

ND1

PDAX 500VA

D2

40....500VALV

a b c


Mains


L1

NN

ND1

PDAX 500VA

D2

230/240V, 50/60Hz



HVLV40....1000VA

LV

a b c


Mains


L

L

L1 N

N

PEN

D1

PDAS 1000VA

D2

40....1000VA

L

L1 N

N

D1

PDAS 1000VA

D2

40....1000VA

L

L1 N

N

D1

PDAS 1000VA

D2

230/240V, 50/60Hz

LV (12V, 20...150A)

Max. 2m


L

ND1D2

TE one4all

L

PEN

D1D2

Product details

TE one4all sc 105VA 86457873

Digital, dimmable transformer with DSI/DALI interface; controllable via the DSI signal of the ControLiteDIM-Basic, dimming range of 1%…100%; for operation of 1�V low voltage tungsten-halogen lamps with a lamp power of between �0 and 105VA; lamp leads up to �m; housing made of flame-resistant polycarbonate, halogen-free; suitable for luminaire installation; protection class II; ambient temperature –�5…+60°C. Size 16�x4�x�1mm. Weight 1�0g.

TE one4all sc 150VA 86457874

Digital, dimmable transformer with DSI/DALI interface; controllable via the DSI signal of the ControLiteDIM-Basic, dimming range of 1%…100%; for operation of 1�V low voltage tungsten-halogen lamps with a lamp power of between �0 and 150VA; lamp leads up to �m; housing made of flame-resistant polycarbonate, halogen-free; suitable for luminaire installation; protection class II; ambient temperature –�0…+50°C. Size �0�x46x40mm. Weight ��0g.

Ordering Guide SAP common item description SAP code

ControLiteDIM Basic Module CONTROLITEDIM-BASIC ��154�54

ControLiteDIM 1, 2 and 3 Gang Retractive Centre Off Switches, white CONTROLITE CDMS1 �61001�5 CONTROLITE CDMS� �61001�6 CONTROLITE CDMS� �61001��

ControLiteDIM PIR Presence Detectors CONTROLITE MRE CDD �610011� CONTROLITE MSF CDD �6100114

ControLiteDIM Microwave Presence Detector CONTROLITE MRE CDDM �6100140 Accessories / DSI/DALI transformer, 12V, 20-105VA and 50-150VA TEone4all 105VA �645�� TEone4all 150VA �645��4

Accessories / DSI phase or reverse phase dimmer, auto load detection, 40-500VA and 40-1000VA PDAX 500VA ��154�0� PDAS 1000VA ��154�06

SAP common item description SAP code

ControLiteDIM Scene Module CONTROLITEDIM-SCENE ��154�56

ControLiteDIM Scene Select Plate CONTROLITE CDSSM �6100115

ControLiteDIM Scene Select Plate Covers CONTROLITE CDSSM BR POL COVER �610011� CONTROLITE CDSSM BR SA COVER �610011� CONTROLITE CDSSM NI SA COVER �610011� CONTROLITE CDSSM WHI COVER �61001�0

ControLiteDIM Scene Plate Slave CONTROLITE CDSSS �6100116

ControLiteDIM Scene Plate Slave Covers CONTROLITE CDSSS BR POL COVER �6��6 CONTROLITE CDSSS SA BR COVER �61001�1 CONTROLITE CDSSS SA NI COVER �61001�� CONTROLITE CDSSS WHI COVER �61001�4

ControLiteDIM Daylight Module CONTROLITEDIM-DAYLIGHT ��154�55

ControLiteDIM Daylight Sensor LSD DAYLIGHT SENSOR �61110��

Lighting people and places

Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated.

Publication No: 397 (INT) Publication Date: 03/07

Head OfficeThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) �0 �� 00Fax: (44) �0 �� 01Website: www.thornlighting.com

AustraliaThorn Lighting Pty Limited 1� Cooper Street, P O Box 1��, Smithfield, NSW �164, AustraliaTel: (61) � �604 4�00Fax: (61) � �604 45��E-mail: [email protected]: www.thornlight.com.au

AustriaThorn Licht GmbH Donau-City-Straße 11, 1��0 Wien, AustriaTel: (4�) 1 �0� 66 11Fax: (4�) 1 �0� 66 11 1�E-mail: [email protected]

ChinaThorn Lighting (Guangzhou) Operations Ltd No.1� Lian Yun Road, Eastern Section, GETDD, Guangzhou 510�60, ChinaTel: (�6) �0 �� 06Fax: (�6) �0 �� 1��E-mail: [email protected]

Thorn Lighting (Tianjin) Co. Ltd �� Hongqi Road, Tianjin �001�0, ChinaTel: (�6) �� 6� ��0�Fax: (�6) �� 6� ��0�E-mail: [email protected]

Czech RepublicThorn Lighting CS spol. s.r.o., Na Březince 6/930, 150 00 Praha 5Czech RepublicTel: (420) 224 315 252Fax: (420) 233 326 313E-mail: [email protected]: www.thornlight.cz

DenmarkThorn Lighting A/S Albuen 44, 6000 Kolding, DenmarkTel: (45) �6�6 �600Fax: (45) �6�6 �601Website: www.thornlight.dk

FranceThorn Europhane SA 156 Boulevard Haussmann, Cedex 0�, Paris �5��, FranceTel: (��) 1 4� 5� 6�6�Fax: (��) 1 4� 5� 6�40Website: www.thorn.fr

Hong KongThorn Lighting (Hong Kong) Limited Unit 4�01, Level 4�, Tower 1, Metroplaza, �� Hing Fong Road, Kwai Chung, N.T., Hong Kong, ChinaTel: (�5�) �5�� 4�0�Fax: (�5�) �� 0�4�E-mail: [email protected]: www.thorn.com.hk

IrelandThorn Lighting (Ireland) Limited ��0 Harold’s Cross Road, Dublin 6W, IrelandTel: (�5�) 1 4�� Fax: (�5�) 1 4�� 4E-mail: [email protected]

ItalyThorn Europhane Spa Via G Di Vittorio, �, Cadriano di Granarolo, Bologna 4005�, ItalyTel: (��) 051 �6��1Fax: (��) 051 �6�0��E-mail: [email protected]: www.thornlighting.it

New ZealandThorn Lighting (NZ) Ltd �� Rosebank Road, P O Box �11�4, Rosebank, Auckland �, New ZealandTel: (64) � �� 155Fax: (64) � �� 5�1

NorwayThorn Lighting ASIndustriveien 11, P O Box 6�, Skytta 14��, NorwayTel: (4�) 6�06 ��Fax: (4�) 6�06 0�51E-mail: [email protected]

PolandThorn Lighting Polska Sp.z.o.o., Ul. Gazowa 26A, Wrocław 50-513, PolandTel: (48) 71 7833 740Fax: (48) 71 3366 029E-mail: [email protected] Website: www.thornlight.pl

RussiaThorn Lighting Novoslobodskaya Str., �1, office 406 Business Center “Novoslobodskaya �1”, Moscow 1��0�0, RussiaTel: (�) 4�5 ��1 �5 41Fax: (�) 4�5 ��1 �5 4�E-mail: [email protected] Website: www.thorn.ru

Thorn Lighting Representative Office,1 Artilleriyskaya str., 1 BC ‘Europa House’, St Petersburg 1�1104, RussiaTel: (�) �1� �1� �11�Fax: (�) �1� �1� �11�E-mail: [email protected]: www.thorn.ru

SingaporeThorn Lighting (Singapore) Pte Ltd 5 Kaki Buki Crescent, 04-0� Koyotech Building, 416�� SingaporeTel: (65) 6�44 5�00Fax: (65) 6�45 ��0�E-mail: [email protected]: www.thornlight.com.sg

SwedenThorn Lighting ABIndustrigatan, Box �05, SE-�61 �� Landskrona, SwedenTel: (46) 41� 5�0 00Fax: (46) 41� �65 �4E-mail: [email protected]: www.thornlight.se

Thorn Lighting Main OfficesUnited Arab EmiratesThorn Lighting Ltd Dubai Al Shoala Building, Office �01, Block E, PO Box 1�00, Deira, Dubai, UAETel: (��1) 4 ��401�1Fax: (��1) 4 ��4��E-mail: [email protected]

Thorn Gulf LLC Al Shoala Building, Office �01/�, Block E, PO Box 1�00, Deira, Dubai, UAETel: (��1) 4 ��4��Fax: (��1) 4 ��4��E-mail: [email protected]

United KingdomThorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) �0 �� 00Fax: (44) �0 �� 01E-mail: [email protected]: www.thornlighting.co.uk

International SalesThorn Lighting Limited 156 Boulevard Haussmann, Cedex 0�, Paris �5��, FranceTel: (��) 1 4� 5� 6�6�Fax: (��) 1 4� 5� 6�40

Thorn Lighting Limited Silver Screens, Elstree Way, Borehamwood, Hertfordshire, WD6 1FE, UKTel: (44) �0 �� 1�15Fax: (44) �0 �� 1�11E-mail: [email protected]

www.thornlighting.com

Date post:	26-Mar-2021
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

Versatile and simple Indoor Lighting Controls for single-room ...Thorn’s Indoor Lighting Controls...

Documents