+ All Categories
Home > Documents > VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update...

VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update...

Date post: 03-Jul-2018
Category:
Upload: phamhuong
View: 213 times
Download: 0 times
Share this document with a friend
52
Transcript
Page 1: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005
Page 2: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

VERSION EFFECTIVE DATE AMENDMENT (based on LMG corporate technical protocol)

LMG CORP/1.5/2012 December-12 INITIAL RELEASE

Tensile strength requirement has been removed from all babies / children categories upto 12

years

Tensile strength requirement for Adult Denim category (above 12 years) has been revised.

Formaldehyde requirement of less than 20 ppm has been enforced for all product categories

catering upto 12 years age group

Total lead content of less than 90 ppm has been enforced for all accessible scrapable surface

coatings

For Blended fabrics (including elastane) the acceptable tolerance limit is revised to +/- 3%

GPT 15 (Underwear) applicable for 100% Cotton content only. For other blends, GPT 16 is

applicable

GPT 18 (Socks) applicable for 95% Cotton or Nylon content only. For other blends, GPT 19 is

applicable

GPT 23 (Swimwear) Color fastness to chlorinated water is under optional test now

Azo Dyes testing is removed from mandatory list

LMG CORP/1.6/2013 August-13

LMG CORP/1.7/2013 October-14

REVISION RECORD

Page 3: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

SR.NO. TESTING PACKAGES

FPT 1 FULL PACKAGE FOR WOVEN FABRIC 65:35 POLY:COTTON & 55:45 POLY:WOOL

FPT 2 WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - A )

FPT 3 WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - B )

FPT 4 WOVEN FABRIC PACKAGE ADDITIONAL COLOR

FPT 5 FULL PACKAGE FOR DENIM FABRIC

FPT 6 KNIT FABRIC PACKAGE 1ST COLOR

FPT 7 KNIT FABRIC PACKAGE ADDITIONAL COLOR

GPT 1 READYMADE APPAREL PACKAGE 65:35 POLY:COTTON & 55:45 POLY:WOOL

GPT 2 WOVEN READYMADE APPARELS PACKAGE ADULT

GPT 3 WOVEN READYMADE APPARELS PACKAGE 8 - 14 YEARS

GPT 4 WOVEN READYMADE APPARELS PACKAGE 0 - 8 YEARS

GPT 5 KNITTED READYMADE APPARELS PACKAGE ADULT

GPT 6 KNITTED READYMADE APPARELS PACKAGE 8 - 14 YEARS

GPT 7 KNITTED READYMADE APPARELS PACKAGE 0 - 8 YEARS

GPT 8 READYMADE DENIM APPARELS PACKAGE ADULT

GPT 9 READYMADE DENIM APPARELS PACKAGE 8 - 14 YEARS

GPT 10 READYMADE DENIM APPARELS PACKAGE 0 - 8 YEARS

GPT 11 ADDITIONAL COLOUR PACK FOR GARMENTS

GPT 12 READYMADE APPARELS PACKAGE (100 % SILK)

GPT 13 FULL PACKAGE FOR BATHROBE, DRESSING GOWN, NEGLIGEE

GPT 14 FULL PACKAGE FOR NECKTIE & SCARF

GPT 15 FULL PACKAGE FOR UNDERWEAR & INTEMATE APPARELS ( 100% Cotton)

GPT 16 FULL PACKAGE FOR UNDERWEAR & INTEMATE APPARELS ( Other than 100% Cotton)

GPT 17 ADDITIONAL COLOUR PACK FOR UNDERWEAR

GPT 18 FULL PACKAGE FOR SOCKS (only men's socks with minimum 95% cotton OR Nylon fibers)

GPT 19 FULL PACKAGE FOR SOCKS (Others)

GPT 20 FULL PACKAGE FOR SWEATER ADULT

GPT 21 FULL PACKAGE FOR SWEATER 8 - 14 YEARS

MAX PROTOCOL LIST

Page 4: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

MAX PROTOCOL LISTGPT 22 FULL PACKAGE FOR SWEATER 0 - 8 YEARS

GPT 23 FULL PACKAGE FOR SWIMWEAR

GPT 24 ADDITIONAL COLOUR PACK FOR SWIMWEAR

GPT 25 FULL PACKAGE FOR PU GARMENT

GPT 26 FULL PACKAGE FOR ARTIFICIAL FAKE FUR

GPT 27 FULL PACKAGE FOR HATS, HAND GLOVES & CAP ETC.

GPT 28 FULL PACKAGE FOR BAG

GPT 29 FULL PACKAGE FOR LINING

GPT 30 FULL PACKAGE FOR OTHER APPARELS OR TEXTILE ACCESSORIES

31 OPTIONAL TEST PACKAGE BASED ON CASE BASIS (ON BUYERS DESCRITION)

32 GENERAL NOTE & TESTING INSTRUCTION

33 LABORATORY RESPONSIBILITIES

34 VENDOR RESPONSIBILITIES

35 EGYPT TEST REQUIRMENTS

36 GENERAL CERTIFICATE OF CONFORMITY

37 OPTIONAL TEST BASED ON EGYPT REQUIREMENT

38 WASHING INSTRUCTIONS

Page 5: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Colourfastness To Washing

or水洗色牢度

AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

Fabric Type Weight (gms)

65% Poly / 35% Cotton

Type A :

Type B :

Type C :

Weft (kg)

40.0 20.0

For 55% Polyster /

45%Wool woven plain

fabric

3.50 3.20

4.50 3.80

4.50 3.80

2• Change in Color: 4 (min.)

• Staining: 4 ( min.)Colourfastness To

Drycleaning干洗色牢度

ISO 105 D01:2010 / SASO

2324:2005

4 Tensile Strength 拉伸强度

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

ISO 13934 – 2

( 1 inch grab test)

Warp (kg)

3 Mass per unit area 克重 BS EN 12127

• For 55% Polyster / 45% Wool Woven plain fabric

Type A : 168 gsm

Type B : 197 +/- 7.5 gsm

Type C : 224 +/- 7.5 gsm

• For 65% Polyster / 35% Cotton fabric ≥ 85gsm

Others report actual or +/- 5% from claim

FABRIC PACKAGE

FPT 1

FULL PACKAGE FOR WOVEN FABRIC PACKAGE 65% POLYSTER / 35% COTTON AND 55% POLY / 45%WOOL

Requirements

Page 6: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1 Fibre Composition成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Colourfastness To

Washing or

水洗色牢度 AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

3

Colour fastness to

Rubbing (Except White,

Ivory & Ecru color)

摩擦色牢度(除白色、象牙色&米

白色)

ISO 105 X 12

4 Count 纱支 ISO 7211 - 5

5 Construction 织物密度 ISO 7211 - 2

6 Mass Per Unit Area 克重 ISO 3801

• +/- 2 units

• +/- 5% from specified

2• Change in Color: 4 (min.)

• Staining: 4 ( min.)Colourfastness To

Drycleaning

ISO 105 D01:2010 / SASO

2324:2005

干洗色牢度

FABRIC PACKAGE

WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - A )

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing

blends also)

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet

2-3 (min)

• +/- 2 units

FPT 2

Page 7: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1 Fibre Composition成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Colourfastness To

Washing or

水洗色牢度 AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

Colourfastness To

Drycleaning

干洗色牢度 ISO 105 D01:2010 /

SASO 2324:2005

3

Colour fastness to

Rubbing (Except White,

Ivory & Ecru color)

摩擦色牢度(除白色、象牙色&

米白色)

ISO 105 X 12

4 Count 纱支 ISO 7211 - 5

5 Construction 织物密度 ISO 7211 - 2

6 Mass Per Unit Area 克重 ISO 3801

Primary

Fabric

Weight

(gms)

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

Primary

Fabric

Type

Primary

fabric

Weight oz/

yd2 & gms

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

≤ 80

80-140

140-200

200-230

230-250

250-270

> 270

2• Change in Color: 4 (min.)

• Staining: 4 ( min.)

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet

2-3 (min)

FPT 3

WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - B )

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing

blends also)

• +/- 2 units

• +/- 2 units

• +/- 5% from specified

7

*Appearance after Wash

( After 3 wash or 1

drycleaning)

洗后外观(3次洗

后或1次干洗)

AATCC 135 / 150 OR

Commercial Drycleaning• Satisfactory (Must follow the general requiements

8 Tensile Strength 拉伸强度

ISO 13934 – 2

( 1 inch grab test)

Warp (kg) Weft (kg)

(Except for

55:45

polyester :

wool &

65:35

polyester :

cotton

blends)

7 4.5

12 8

16 9

18 11

20 14

9 Tear Strength 撕裂强度 ISO 13937-part 1

Warp (gms) Weft (gms)

900 800

1000 900

600

400

1500 1150

680 590

770 680

Other

wovens

(except

55:45

polyester :

wool &

65:35

polyester :

25 18

32 22

600

800

1000

1200

1300 1100

1350 1200

550

400

1000

800

1100

FABRIC PACKAGE

1000

1200

All pile

fabric

(Corduroy,

Velveteen,

Velvet &

Terry),

Flannel &

Seersucker

550

Page 8: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

FPT 3

FABRIC PACKAGE

Fabric

Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

*Applicable for printed colors

7&

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

7 9

10 13

10Seam slippage & Seam

strength接缝滑移&强度 ISO 13936-1

Seam slippage

(kg) (For

Seam

7

10

8 11

7

4 6

8 10

Seam strength

(Kg)

Tops &

Blouses

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having

65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash

appearances.

16 21

Skirts &

Dresses :

4 6

Bottoms

(Pyjamas/

Lining /

Trousers

/Formal

skirts)

9

13

12

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

17

9

Page 9: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

Colourfastness To

Washing or水洗色牢度

AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

2

Colour fastness to

Rubbing (Except White,

Ivory & Ecru color)

摩擦色牢度(除白色、象牙&米白色)

ISO 105 X 12

Requirements

FPT 4

FABRIC PACKAGE

干洗色牢度

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)

WOVEN FABRIC PACKAGE ADDITIONAL COLOR

1• Change in Color: 4 (min.)

• Staining: 4 ( min.)Colourfastness To

Drycleaning

ISO 105 D01:2010 / SASO

2324:2005

Page 10: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度 AATCC 132 : 2009

3 Mass Per Unit Area 克重 ISO 3801

拉伸强度4

100 % Cotton & Others

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Warp : kg (min)

36

2

• Non indigo dyed : Colour change - 3.5 (min), Colour staining : 3 (min)

• Indigo dyed & sulfur black colours. Colour

change - 2 min, Colour staining - 2 min

Tensile Strength

(Not applicable for

children below 14

yrs)

FABRIC PACKAGE

ASTM D 5034:2009

± 5 % from specified

18

Weft : kg (min)

FPT 5

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

FULL PACKAGE FOR DENIM FABRIC

Page 11: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Colourfastness To

Washing or水洗色牢度

AATCC 61:2010 /

SASO 170:2005 /

SASO 2329:2005

3

Colour fastness to

Rubbing (Except

White, Ivory & Ecru

color)

摩擦色牢度(除白色、象牙色&

米白色)

ISO 105 X 12

5 Mass Per Unit Area 克重 BS EN 12127

*Applicable for printed colors.

6

&

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

FPT 6

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

干洗色牢度

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding,

unsatisfactory after wash appearances.

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant

Blends having 65 % Viscose Content or more)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

Bursting StrengthISO 13938 - 1

(d = 30.5 mm)

• For ≤ 170 gsm : 30 lb/sq inch

• For ˃ 170 gsm: 40 lb / sq inch

ISO 105 D01:2010 /

SASO 2324:2005

6

*Appearance after

Wash ( After 3 wash

or 1 drycleaning)

AATCC 135 / 150 OR

Commercial

Drycleaning

• Satisfactory (Must follow the general

requiements

洗后外观(3次

洗后或1次干洗

FABRIC PACKAGE

KNIT FABRIC PACKAGE 1st COLOR

Requirements

± 5 % from specified

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane

containing blends also)

2

胀破强度

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -

3, Wet 2-3 (min)

4

Colourfastness To

Drycleaning

Page 12: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

Colourfastness To

Washing or

水洗色牢度 AATCC 61:2010 / SASO

170:2005 / SASO

2329:2005

2

Colour fastness to

Rubbing (Except

White, Ivory & Ecru

color)

摩擦色牢度(除白色、象牙色&米白

色)

ISO 105 X 12

FPT 7

FABRIC PACKAGE

Requirements

干洗色牢度

KNIT FABRIC PACKAGE ADDITIONAL COLOR

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)

1• Change in Color: 4 (min.)

• Staining: 4 ( min.)Colourfastness To

Drycleaning

ISO 105 D01:2010 /

SASO 2324:2005

Page 13: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

2 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

3

Labelling /

Marking(fiber

composition &care

label)

标签(成分标和洗护标)

SASO 1173/1174

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Fabric Type Weight (gms)

65% Poly / 35% Cotton

Type A :

Type B :

Type C :

Upto 150 gsm

拉伸强度 150-200 gsm

200-250 gsm

Above 250 gsm

Upto 150 gsm

150-200 gsm

200-250 gsm

Above 250 gsm

7 pH content PH值 ISO 3071

8

Formaldehyde

content ( For 65:35

Poly Cotton blend

only

甲醛(

仅用于65:35

涤棉混纺)

ISO 14184-1

4&

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

克重

• For 65% Polyster / 35% Cotton fabric ≥ 85gsm

Mass per unit area BS EN 12127

• As required

3.8

Others report actual or +/- 5% from claim

3.23.5

4.5

GPT 1

1

4&

5

• For 55% Polyster / 45% Wool Woven plain fabric

Type A : 168 gsm

Type B : 197 +/- 7.5 gsm

Type C : 224 +/- 7.5 gsm

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Satisfactory (Must comply general requirement)

Warp (kg) Weft (kg)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

25

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

For 55:45 polyester : wool blend:5.5 – 8.5

• Max. 300 ppm

Other : (Normal woven

fabric)

25

10

3.84.5

18

12

18

16

For 55% Polyster /

45%Wool woven plain

fabric

14

23

Satisfactory (Must comply general requirement)

ISO 13934 – 2

( 1 inch grab test)13

25

20

16

20

GARMENT PACKAGE

40

9

20

Tensile Strength

All pile, corduroy, terry,

velvet

READYMADE APPAREL PACKAGE 65% POLYSTER / 35% COTTON AND 55% POLY / 45% WOOL

156

Page 14: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

5 pH content PH值 ISO 3071

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• As required

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

For 55:45 polyester : wool blend:5.5 – 8.5

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

4&

Satisfactory (Must comply general requirement)

GARMENT PACKAGE

Satisfactory (Must comply general requirement)

WOVEN READYMADE APPARELS PACKAGE ( ADULT )

Requirements

3

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 2

Page 15: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6Formaldehyde

content甲醛 ISO 14184-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GPT 3

WOVEN READYMADE APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)

• As required

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

3

4&

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Babies & Chilren ( < 14 years ) : < 20 ppm

GARMENT PACKAGE

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

Satisfactory (Must comply general requirement)

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

For 55:45 polyester : wool blend:5.5 – 8.5

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Satisfactory (Must comply general requirement)

Requirements

Page 16: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6Formaldehyde

content 甲醛 ISO 14184-1

7

Colour fastness to

Saliva(Except White,

Ivory & Ecru color)

耐唾液色牢度 DIN 53160 - 1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

GARMENT PACKAGE

WOVEN READYMADE APPARELS PACKAGE ( 0--8 YEARS AGE GROUP)

4 &

Requirements

3

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 4

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 (min).

• For 0-3 years: 4.0 – 7.5 • For Direct

skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

For 55:45 polyester : wool blend:5.5 – 8.5

Satisfactory (Must comply general requirement)

Satisfactory (Must comply general requirement)

• As required

Page 17: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

5 pH content PH值 ISO 3071

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

4 &

• As required

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

3

GARMENT PACKAGE

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

For 55:45 polyester : wool blend:5.5 – 8.5

KNITTED READYMADE APPARELS PACKAGE ( ADULT )

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Satisfactory (Must comply general requirement)

Satisfactory (Must comply general requirement)

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Requirements

GPT 5

Page 18: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6Formaldehyde

content 甲醛 ISO 14184-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

KNITTED READYMADE APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)

Satisfactory (Must comply general requirement)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

4 &

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Chilren ( < 14 years ) : < 20 ppm

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• As required

Requirements

GARMENT PACKAGE

Satisfactory (Must comply general requirement)

3

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

GPT 6

Page 19: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6Formaldehyde

content 甲醛 ISO 14184-1

7

Colour fastness to

Saliva(Except White,

Ivory & Ecru color)

耐唾液色牢度 DIN 53160 - 1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 (min).

• For 0-3 years: 4.0 – 7.5 • For Direct

skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Chilren ( < 14 years ) : < 20 ppm

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

4 &

Satisfactory (Must comply general requirement)

Satisfactory (Must comply general requirement)

3

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

GARMENT PACKAGE

KNITTED READYMADE APPARELS PACKAGE ( 0--8 YEARS AGE GROUP)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

GPT 7

Page 20: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度 AATCC 132 : 2009

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after Dry

clean干洗外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6 Mass Per Unit Area 克重 ISO 3801

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

4 &

3

Warp : kg (min)

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

ASTM D 5034:2009

GPT 8

READYMADE DENIM APPARELS PACKAGE ( ADULT )

• As required

Satisfactory (Must cimply general requirement)

Requirements

± 5 % from specified

18

• Non indigo dyed : Colour change - 3.5 (min), Colour staining : 3 (min) •

Indigo dyed & sulfur black colours. Colour change - 2 min, Colour staining - 2 min

36

Color Change: 4 min.

Color Staining: 4min

Satisfactory (Must cimply general requirement)

Tensile Strength

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

7 拉伸强度

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Weft : kg (min)

100 % Cotton & Others

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

**** Garments made by Indigo dyed fibres will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

Page 21: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度 AATCC 132 : 2009

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6Formaldehyde

content 甲醛 ISO 14184-1

7 Mass Per Unit Area 克重 ISO 3801

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

4 &

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Satisfactory (Must cimply general requirement)

Requirements

• Non indigo dyed : Colour change - 3.5 (min), Colour staining : 3 (min)

• Indigo dyed & sulfur black colours. Colour change - 2 min, Colour staining - 2 min

ASTM D 5034:2009

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

GARMENT PACKAGE

READYMADE DENIM APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)

Weft : kg (min)

3

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

**** Garments made by Indigo dyed fibres will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

36

GPT 9

18

• Babies & Chilren ( < 14 years ) : < 20 ppm

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

8

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Satisfactory (Must cimply general requirement)

± 5 % from specified

Tensile Strength 拉伸强度

100 % Cotton & Others

Warp : kg (min)

Page 22: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度 AATCC 132 : 2009

Appearance after Wash

OR水洗外观 AATCC 135 / 150

Appearance after Dry

clean干洗外观 Commercial Dry clean

5 pH content PH值 ISO 3071

6 Formaldehyde content 甲醛 ISO 14184-1

7

Colour fastness to

Saliva(Except White,

Ivory & Ecru color)

耐唾液色牢度 DIN 53160 - 1

8 Mass Per Unit Area 克重 ISO 3801

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 (min).

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

GPT 10

± 5 % from specified

**** Garments made by Indigo dyed fibres will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

• Non indigo dyed : Colour change - 3.5 (min), Colour staining : 3 (min)

• Indigo dyed & sulfur black colours. Colour change - 2 min, Colour staining - 2 min

3

• For 0-3 years: 4.0 – 7.5 • For

Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

GARMENT PACKAGE

READYMADE DENIM APPARELS PACKAGE ( 0 - 8 YEARS AGE GROUP)

4 &

Requirements

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Satisfactory (Must cimply general requirement)

Satisfactory (Must cimply general requirement)

Page 23: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

Colour Fastness to

WashingOR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

3 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

2 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

Satisfactory (Must comply general requirement)

ADDITIONAL COLOUR PACK FOR GARMENTS

Requirements

1

• Change in color – 4 (min)

• Staining – 4 (min) For Denim

• Non indigo dyed : Colour change - 3.5 (min), Colour staining : 3 (min)

• Indigo dyed & sulfur black colours. Colour change - 2 min, Colour staining - 2 min

• Color change: 4 (min.)

• Color Staining: 4 (min.)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

GARMENT PACKAGE

2 &

Satisfactory (Must comply general requirement)

• For 0-3 years: 4.0 – 7.5 • For

Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

GPT 11

Page 24: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗外观

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗外观 AATCC 132:2009

Appearance after

Wash OR水洗色牢度 AATCC 135 / 150

Appearance after

Dry clean干洗色牢度 Commercial Dry clean

5 Tensile Strength 拉伸强度 ISO 13934 - 2

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Warp – 20 kg (Min)

• Weft – 15 kg (Min)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Additional Mandatory Requirements (for Children category upto 14 years)

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

• Color staining: 4-5 min.

Satisfactory (Must comply general requirement)

Satisfactory (Must comply general requirement)

• Babies & Chilren ( < 14 years ) : < 20 ppm

3

4 &

• Change in color – 4 (min)

• Staining – 3 (min)

GARMENT PACKAGE

Requirements

READYMADE APPARELS PACKAGE FOR 100% SILK

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GPT 12

Page 25: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度 AATCC 132:2009

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5Tensile Strength (

for Woven) 拉伸强度(梭织) ASTM D 5034

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Sheer fabrics: 30 lbs / sq inch

• Non sheer fabrics: 50 lbs / sq inch

4 &

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Sheer fabrics: 7 kg min.

• Non sheer fabrics: 9 kg min.

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

Satisfactory (Must comply general requirement)

Additional Mandatory Requirements (for Children category upto 14 years)

Fabric weight:For ≥ 170 gsm: 40 lb / sq inch

• Color staining: 4-5 min.

GPT 13

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Fabric weight: For ≤ 170 gsm : 30 lb/sq inch6

Bursting Strength (

for Knits)胀破强度(针织)

3

• Change in color – 4 (min)

• Staining – 3 (min)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GARMENT PACKAGE

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• As required

ASTM D3786:2009

(Hydraulic)

Satisfactory (Must comply general requirement)

FULL PACKAGE FOR BATHROBE , DRESSING GOWN , NEGLIGEE

Page 26: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度 AATCC 132:2009

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5Tensile strength (For

Woven)拉伸强度(梭织) ASTM D 5034

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

FULL PACKAGE FOR NECKTIE AND SCARF

• Color staining: 4-5 min.

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

GPT 14

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Additional Mandatory Requirements (for Children category upto 14 years)

Satisfactory (Must comply general requirement)

• 9 kg min.

• As required

4 &

Requirements

• Change in color – 4 (min)

• Staining – 3 (min)

3

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Satisfactory (Must comply general requirement)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Babies & Chilren ( < 14 years ) : < 20 ppm

Page 27: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Colour Fastness to

Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

5Formaldehyde

content甲醛 ISO 14184-1

Plain Interlock Plain Interlock

Thick 106-118 98-106 146-156 102-110

Medium 126-134 114-138 172-180 118-164

Fine 142-154 152-168 196-212 180-196

Others

1

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

Requirements

For Cotton Knitted

underwear

Determination of

number of Courses

& Wales

BS 5441 SASO

1170:1997

Number of Courses in 10 cm

FULL PACKAGE FOR UNDERWEAR (ONLY 100% COTTON)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Color staining: 4-5 min.

Additional Mandatory Requirements (for Babies 0 - 3 years)

Report actual or +/- 5% from claims

• For 100 % Cotton : 6.0 – 8.0 • Other

than 100 % Cotton : 4.0-7.5

• As required

Number of Wales in 10

cm

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GPT 15

6

• Babies & Chilren ( < 14 years ) : < 20 ppm • Others

: < 75 ppm

Class of

fabric

织物密度

Page 28: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Colour Fastness to

Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

5Appearance after

Wash OR水洗外观 AATCC 135 / 150

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GPT 16

Satisfactory (Must comply general requirement)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Additional Mandatory Requirements (for Children category upto 14 years)

• Color staining: 4-5 min.

• As required

• Color change: 4 (min.)

• Color Staining: 4 (min.)

• For 100 % Cotton : 6.0 – 8.0 • Other

than 100 % Cotton : 4.0-7.5

• Babies & Chilren ( < 14 years ) : < 20 ppm • Others

: < 75 ppm

FULL PACKAGE FOR UNDERWEAR (Other than 100% Cotton)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Page 29: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

2 pH content PH值 ISO 3071

3Formaldehyde

content甲醛 ISO 14184-1

1

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Others : < 75 ppm

• Color staining: 4-5 min.

• For 100 % Cotton : 6.0 – 8.0 • Other

than 100 % Cotton : 4.0-7.5

Additional Mandatory Requirements (for Children category upto 3 years)

GPT 17

ADDITIONAL COLOUR PACK FOR UNDERWEAR

Requirements

• Color change: 4 (min.)

• Color Staining: 4 (min.)

Page 30: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 2636:2006

Type Size

9

9.5

10

10.5

11

11.5

12

Nylon

Others

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

GPT 18

FULL PACKAGE FOR SOCKS (Applicable for 95% cotton OR Nylon content Only)

800

Mass of 10 pairs (

gms)

Cotton

650

725

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As per clause 6 of SASO 2636

3

470

540

Report actual or +/-5% from claims

500

175, +/- 5%

织物密度

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

For Men's Cotton Nylon

Socks

Additional Mandatory Requirements (for Children category upto 3 years)

580

Additional Mandatory Requirements (for Children category from 3 to 14 years)

Determination of

weight of SocksSASO 2636:2006

Page 31: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Colour Fastness to

Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

5Appearance after

Wash OR水洗外观 AATCC 135 / 150

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

• As required

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GPT 19

FULL PACKAGE FOR SOCKS (Others)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• For 100 % Cotton : 6.0 – 8.0 • Other

than 100 % Cotton : 4.0-7.5

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 min.

Additional Mandatory Requirements (for Children category from 3 to 14 years)

• Babies & Chilren ( < 14 years ) : < 20 ppm • Others

: < 75 ppm

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Additional Mandatory Requirements (for Children category upto 3 years)

Satisfactory (Must comply general requirement)

Page 32: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

S.No Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5 pH content PH 值 ISO 3071

6

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

(Supplier must send the full contracted sample for testing)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

GPT 20

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

4 &

Satisfactory (Must comply general requirement)

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Report actual or +/- 5% from claim

Satisfactory (Must comply general requirement)

• As required

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

GARMENT PACKAGE

3

FULL PACKAGE FOR SWEATER (ADULT)

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Page 33: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

S.No Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5 pH content PH 值 ISO 3071

6Formaldehyde

content甲醛 ISO 14184-1

7

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Chilren ( < 14 years ) : < 20 ppm

• As required

• Report actual or +/- 5% from claim

4 &

Satisfactory (Must comply general requirement)

Satisfactory (Must comply general requirement)

3

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

GARMENT PACKAGE

FULL PACKAGE FOR SWEATER ( 8-14 Yrs )

(Supplier must send the full contracted sample for testing)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 21

Page 34: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

S.No Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

5 pH content PH 值 ISO 3071

6Formaldehyde

content甲醛 ISO 14184-1

7

Colour fastness to

saliva ( for 0-3 yrs

only)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

8

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Chilren ( < 14 years ) : < 20 ppm

• As required

• Report actual or +/- 5% from claim

4 &

Satisfactory (Must comply general requirement)

• Color staining: 4-5 min.

Satisfactory (Must comply general requirement)

3

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

GARMENT PACKAGE

FULL PACKAGE FOR SWEATER ( 0 - 8 Yrs )

(Supplier must send the full contracted sample for testing)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 22

Page 35: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Colour fastness to

Washing水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

5 pH content PH值 ISO 3071

6Bursting Strength (

For Knits)胀破强度

ISO 13938 - 1

(d = 30.5 mm)

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

GPT 23

• As required

Requirements

GARMENT PACKAGE

FULL PACKAGE SWIMWEAR (Supplier must send the full contracted sample for testing)

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

Additional Mandatory Requirements (for Children category upto 14 years)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• For 0-3 years: 4.0 – 7.5 • For

Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For ≤ 170 gsm : 30 lb/sq inch

• For ≥ 170 gsm: 40 lb / sq inch

Page 36: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1Colour Fastness to

WashingOR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

2 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GPT 24

ADDITIONAL COLOUR PACK FOR SWIMWAER

Requirements

• Color change: 4 (min.)

• Color Staining: 4 (min.)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

• For 0-3 years: 4.0 – 7.5 • For

Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

Additional Mandatory Requirements (for Children category upto 14 years)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Page 37: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3 PU Analysis PU 分析 FTIR

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

Colour fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

6 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

• Confirm genuine PU

• Babies & Chilren ( < 14 years ) : < 20 ppm

Satisfactory (Must comply general requirement)

Satisfactory (Must comply general requirement)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 min.

• As required

FULL PACKAGE FOR PU GARMENT (PVC SHOULD NOT BE DETECTED)

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

Additional Mandatory Requirements (for Children category upto 14 years)

5

4 &

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

GARMENT PACKAGE

GPT 25

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Page 38: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗外观

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗外观

ISO 105 D01

SASO 2324 : 2005

Appearance after

Wash OR水洗色牢度 AATCC 135 / 150

Appearance after

Dry clean干洗色牢度 Commercial Dry clean

5 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

4 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Additional Mandatory Requirements (for Children category upto 14 years)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Color change: 4 (min.)

• Color Staining: 4 (min.)

4 &

• Change in color – 4 (min)

• Staining – 4 (min)

GPT 26

FULL PACKAGE FOR ARTIFICIAL FAKE FUR GARMENTS

• As required

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

3

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

GARMENT PACKAGE

Requirements

Satisfactory (Must cimply general requirement)

Satisfactory (Must cimply general requirement)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Page 39: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度

ISO 105 D01

SASO 2324 : 2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Chilren ( < 14 years ) : < 20 ppm

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

3

• Change in color – 4 (min)

• Staining – 4 (min)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GPT 27

• Color staining: 4-5 min.

FULL PACKAGE FOR HATS , HAND GLOVES , CAP ETC

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

Page 40: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Items 测试项目 Test Method

2 Colorfastness to Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

• Color Change: 4 min.

• Color Staining: 3-4 min.

• Self Staining :4

1 Fiber Content for textileSASO 781 : 1994 ; ISO 5088 ;

ISO 1833纺织成分

GPT 28

FULL PACKAGE FOR BAG

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Requirement

Page 41: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标) SASO 1173/1174

Colour Fastness to

Washing水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

3

GPT 29

NOTE: ANY GARMENT HAVING MORE THAN 5% TRIM COVERAGE, THIS TESTING HAS TO BE PERFORMED TESTING MUST BE CARRIIED OUT ALONG

WITH THE MAIN BODY, IF NEEDED, LAB MAY ASK FOR ADDITIONAL GARMENTS.

• As required

FULL PACKAGE FOR LINING

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

Page 42: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1 Fibre Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标) SASO 1173/1174

Colour Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Colour Fastness to

Dryclean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Colour fastness to

saliva ( for 0-3 yrs

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-

3岁) DIN 53160-1

GPT 30

Requirements

• As required

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Color staining: 4-5 min.

FULL PACKAGE FOR OTHER APPAREL OR TEXTILE ACCESSORIES

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

3

• Change in color – 4 (min)

• Staining – 4 (min)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Chilren ( < 14 years ) : < 20 ppm

Page 43: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr. No. Test Description 测试项目 Method / Standard

1Pull of strength (

Age upto 3 yrs)

拉力(3岁及以下

)BS EN 71 Part- 1

2

Cords & Drawstring

on Children's

clothing

童装绳索安全 EN 14682

1

Flammability (

Applied to

nightwear upto 14

yrs)

防火(适用于12岁

及以下的睡衣)EN 14878

Sr. No. Test Description 测试项目 Method / Standard

Fabric Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

Primary Fabric

Weight (gms)

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

≤ 80

80-140

140-200

200-230

230-250

250-270

> 270

Primary Fabric Type

Primary fabric

Weight oz/ yd2 &

gms

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

≤ 80

80-140

140-200

200-230

230-250

250-270

> 270

1200 1100

1300 1100

1350 1200

Other wovens

(except 55:45 polyester :

wool & 65:35 polyester :

cotton blend)

400 400

600 600

800 800

1000 1000

1000 900

1200 1000

1500 1150

Weft (gms)

All pile fabric

(Corduroy, Velveteen,

Velvet & Terry), Flannel

& Seersucker fabrics

550 550

680 590

770 680

900 800

20

23 23

25 25

3For Wovens Tear

Strength撕裂强度 ISO 13937-part 1

Warp (gms)

Other wovens

(except 55:45 polyester :

wool & 65:35 polyester :

cotton blend)

9 7.5

12 10

15 13

17 15

20

25 18

32 22

8

16 9

18 11

20 14

2For Wovens

Tensile Strength拉伸强度

ISO 13934 – 2

( 1 inch grab test)

Warp (kg) Weft (kg)

All pile fabric

(Corduroy, Velveteen,

Velvet & Terry), Flannel

& Seersucker fabrics

7 4.5

12

16.0 21.0

Skirts & Dresses : Only

for loose fitted garment

4.0 6.0

7.0 9.0

Bottoms (Pyjamas/

Lining / Trousers

/Formal skirts)

7.0 9.0

8.0 11.0

10.0 13.0

12.0 17.0

7.0 9.0

8.0 10.0

10.0 13.0

Requirements

1

For Wovens

Seam slippage &

Seam strength

接缝滑移&强度ISO 13936-1 ISO

13935-2

Seam slippage (kg)

(For Seam Opening

6.00 mm)

Seam strength (Kg)

Tops & Blouses

4.0 6.0

EN 71 part - 1

No small parts,sharp points/sharp edges before and after abuse tests

- Torque test

Torque Rotation of 180 o torque of 0.34Nm period of 5 sec,

maintain for 10 sec in clockwise & anticlockwise direction

Tension test

*(50+2) N when the largest accesible dimension of the component to be gripped and tested is

6mm or less.

*(90+2) N when the largest accessible dimension of the component to be gripped & tested is

greater then 6mm.

Apply the force gradually over a period of approx 5 sec maintain for 10 sec

Chemical Safety: Optional Testing Applied to nightwear upto 14 yrs

Class A - All nightwear ( except pyjamas). There shall be no surface flash. The 3rd marker

thread must not be servered in less than 15 sec

ADITIONAL TEST

31. OPTIONAL TESTING ( ON BUYERS DESCRETION )

Physical Safety: Optional Testing For Children Garment 0-8 years.

Requirements

Minimum 90 N

Must comply

3

Small parts (0-3 yrs

old) Sharp points &

sharp edges (0-8 yrs

old)

小物件(0-3岁)

尖点&利边(0-

8岁)

Page 44: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Weight (gms)

Upto 170 gsm

170-255 gsm

Above 255 gsm

Weight (gms)

Upto 170 gsm

170-255 gsm

Above 255 gsm

8 Bursting Strength 胀破强度ISO 13938 - 1

(d = 30.5 mm)

9

Colour fastness to

Rubbing (Except

White, Ivory & Ecru

color)

摩擦色牢度(除白色、象牙色&米白

色)

ISO 105 X 12

KNITS- ISO 12945 -1

(pill box method) –

14,400 rev., 4 H.

(10,800 rev., 3H for

blends with Wool).

WOVENS &

Tricot(circular knits)-ISO

12945-2 (Martindale

method)

1 UV Protection 防紫外光 EN 13758 - 1

2Colour Fastness to

Chlorinated water氯水色牢度 ISO 105 E 03

1 Tensile Strength 拉伸强度ASTM D 5034 : 2009

(1 inch grab test)

2 Seam Strength 接缝强度 ASTM D 1683 : 2007

3 Bursting Strength 胀破强度ISO 13938 - 1

(d = 30.5 mm)

1 Pile Loss IHTM 26

1Colour fastness to

Light光照色牢度

ISO 105 B02

(upto grade 5)

1Colour Fastness to

Chlorinated water氯水色牢度 ISO 105 E 03

• 4 (min.)

FOR HATES,GLOVES,CAP

• Change in color:

- Medium to dark – 4-5 min.

- Pastels, bright & neons – 4.0 min

10 Pilling 起毛起球

• Knitted – 3-4*

• Wool/Wool blends – 3*

• Woven (2000 rubs) – 4. *

• Tricot (500 rubs) – 3*.

• *assessment after washing

(5A@40 degree C – Flat)

• 50 +

FOR PU GARMENT

• 35 kg / min

• 15 kg / min

• For ≤ 170 gsm : 30 lb/sq inch

• For ≥ 170 gsm: 40 lb / sq inch

FOR ARTIFICIAL FAKE FUR

• For ≤ 170 gsm : 30 lb/sq inch

• For ≥ 170 gsm: 40 lb / sq inch

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)

FOR SWIMWEAR

• Change in color:

- Medium to dark – 3.5

- Pastels, bright & neons – 3.0

7 Mass per unit area 克重 ISO 3801• For 65% Polyster / 35% Cotton fabric ≥ 85gsm

Others report actual or +/- 5% from claim

11 kg

13.5 kg

22 kg

5For Denims

Seam Strength 接缝滑移 ASTM D 1683 For all

Seam Strength : kg

(min)

Weft in Kg

1.8 1.4

3.6 1.6

5.2 1.8

4For Denims

Tear Strength ASTM D 1424 For all

Warp in Kg

Warp : kg (min)

FOR SWIMWEAR

• Change in color:

- Medium to dark – 3.5

- Pastels, bright & neons – 3.0

Weft : kg (min)

100 % Cotton & Others 36 18

6For Denims

Tensile Strength拉伸强度 ASTM D 5034:2009

Page 45: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having upto 65 % Viscose Content or more)

32. General Note:

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

a. Color change & Cross staining within the garment

Testing instructions:For PU garments, no PVC should be detected.

Print durability will be applied only for garments having AOP (all over print), motif prints, embroidery, applique etc. For solid colors, this test should not be performed.

For full white/cream/ecru colors, there is no need to test colorfastness to Rubbing.

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Seam strength should cover both shell & lining.

NO AZO dye test should be conducted for white color. AZO test will be applicable if White colour is treated with Optical whitener.

When applicable, conduct 3 colors in one AZO test.

In case of forbidden amine detection in a mixed test, a retest has to be conducted systematically on each color to find out the problematic color.

Garments having trims of more than 5% coverage, colorfastness to washing of trims should be performed.

For garments having lining, the lining will be evaluated for fiber analysis & color fastness to washing.

Children wear safety requirements (pH, formaldehyde & saliva) will be applied to all the colors, when different patterns / combinations submitted.

Pull test for children wear apparel to be conducted only on functional trims (buttons, snaps & rivets), not to be conducted on decorative trims & zippers.

Page 46: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

- Complete details of the supplier ( name, contact person, contact details)

-         PO number

-         Style number

-         Date of submission & completion date

33. Laboratory Responsibilities All Landmark samples should be evaluated according to agreed test package & requirement.

Lab to ensure that correct Landmark standards are being followed.

Labs are required to always include the following information in the test report:

-         Image of the product

-         Photograph of before wash & after wash of the merchandise

-         Summary of the test repot should be on the cover page

-         Report summary should clearly mention Pass/Fail status of the merchandise under the mandatory requirements.

-         Care instruction in the care label ( provided by the supplier)

-         Claimed fibre composition & fabric construction

-         End use e.g. skirts, trousers etc

-         Category e.g. adult / children / babies

Indicate if the test report is a resubmission

-         shell and lining reports should be mentioned separately in the report

-         for multiple colors, report should mention “A”, “B” etc for different colors

All test reports should have unique report number for traceability

For garments where fabric reports are already available, the gmt report should have a mention of the fabric evaluation report number

-         Labs need to note any contrast fabric or trim used in the garment

-         Test standards & specification needs mention along with test values

For garments with lining

Page 47: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

·         Indicate whether further processing will take place e.g. placement prints, garment washing etc.

·         Request a test report to be delivered with the production fabric.

·         Ensure all parameters in the test report conform to Landmark requirements before production.

Vendors are required to always include the following information in the test request form:

34. Vendor responsibility ·         Understand Landmark requirements

·         The fabric purchase order must include Landmark requirements.

·         Indicate whether contrast trims will be used in the garment e.g. this fabric will be trimmed with white binding.

-         Claimed fibre composition & fabric construction

-         End use e.g. skirts, trousers etc

Category e.g. Men / Ladies /8-14 yrs Kids (Boy/Girl )/ 2-8Yrs Kids (Boy/Girl ) / Infants

- Complete details name, contact person, contact details

-         PO number

-         Style number

Care instruction in the care label ( provided by the QA on QA data Sheet)

Page 48: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Products Regulated by Egyptian Customs: Textiles (Only Chemical Test)

Products that are covered under textiles are:

Home Textiles (ES 7266-3/2011),

Garments + Readymade Clothes (ES 7266-4/2011),

Rugs and Carpets (ES 7266-5/2011).

Table: 1

Testing Requirement as per Egyptian Standard ES 7266-3/2011:

TEST REQUIREMENTS Standard Reference

Detection of banned Azo-dyes UNE-EN 14362- 1

Navy blue UNE-EN 14362- 2

BABIES: 20 ppm UNE-EN ISO 14184-1

Direct contact : 75 ppm UNE-EN ISO 14184-2

Without direct contact : 300 ppm

Chromatographic analysisLC-MS & UPLC-SQD

DIN54231

64LFGD 82.02-10

EN 1122

ASTM E1645

0.5 µg/cm2/week

(Only metal parts)

Table: 2

Testing Requirement as per Egyptian Standard ES 7266-4/2011:

TEST REQUIREMENTS Standard Reference

Detection of banned Azo-dyes UNE-EN 14362- 1

Navy blue UNE-EN 14362- 2

BABIES: 20 ppm

Direct CONTACT: 75 ppm UNE-EN ISO 14184-1

Without direct CONTACT: 300 ppm UNE-EN ISO 14184-2

Chromatographic analysisLC-MS & UPLC-SQD

DIN54231

64LFGD 82.02-10

EN 1122

ASTM E1645

0.5 µg/cm2/week

(Only metal parts)

CPSC-CH-E1002-08 (non-metal)

300 ppm CPSC-CH-E1001-08 (metal)

(only for children < 12 years.) CPSC-CH-E1003-09 (Surface coating)

ASTME1645 & ASTM E1613

1000 ppm

(only for children < 12 years.)

Table: 3

SCOPE OF PRODUCTS: All kinds of Tapestries, hyraxes, blankets and curtains manufactured of all types. Which includes bath towel, hand towels, pillows,

cushions, cushion filler, bathrobes, bed sheets, mattress topper, comforter, cushion cover, duvet cover, pillow cover, placemat, table cover, table runner

used inside and outside home.

Formaldehyde

Cadmium Forbidden

Nickel (SCREEING TEST) EN 1811 & EN 12472

SCOPE OF PRODUCTS: All kinds of Garments, clothing, and embroideries for men, women, children, girls and boys in different fabrics and all sizes.

Formaldehyde

Cadmium Forbidden

EN 15777Phthalates

Lead

ForbiddenDetection of Carcinogenic dyes

Nickel (SCREEING TEST) EN 1810 & EN 1811 & EN 12472

EGYPT STANDARDS ( Below will be Tested if signed GCC document is not provided to Max & copy to Testing Lab. ) Company Name should

Match on TRF & GCC

35. EGYPT Testing method, Limit & Requirement

Forbidden

ForbiddenDetection of Carcinogenic dyes

Forbidden

Page 49: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Testing Requirement as per Egyptian Standard ES 7266-5/2011:

TEST REQUIREMENTS Standard Reference

Detection of banned Azo-dyes UNE-EN 14362- 1

Navy blue UNE-EN 14362- 2

Formaldehyde 300 ppm UNE-EN ISO 14184-1

UNE-EN ISO 14184-2

Auxiliary materials used in dyes, printing and

preparation:Tris phosphine oxide (azir dinyl) Chromatographic analysis

Tris phosphate (2,3 di bromo propyl) HPLC

Poly bromo bi phenyls (PBB)

(only applicable for Carpets and Rugs)

Chromatographic analysisLC-MS & UPLC-SQD

DIN54231

64LFGD 82.02-10

EN 1122

ASTM E1645

16 C.F.R. 1630, 1631

SCOPE OF PRODUCTS: Rugs and Floor covering (cotton bath mats) and carpets manufactured from natural or manufactured or compound fibres (whether

woven or otherwise) whether manufactured by hand or by machine.

Cadmium Forbidden

Forbidden

Detection of Carcinogenic dyes

Forbidden

Forbidden

Flammability

Seven out of eight samples passing such that

the area between the carbonised part to the

surround does not exceed 2.54 cm (one inch)

Page 50: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Sr.

No.Test Description 测试项目 Method / Standard

1

Total Lead

(for children ≤ 14 years

old)

总铅(12岁以下儿童

US EPA 3051/3052 analysis with ICP

-EN 71 part 3

2

Phthalates *

(for children ≤ 14 years

old)

邻苯二甲酸盐*

(12岁以下儿童

EN 15777 & CPSC-CH – C1001-09.3

3 Nickel release** 镍释放** EN 1811 & EN 12472

4 Total Cadmium *** 总镉***EN 1122 & microwave digestion

method

5 PBB s**** 多溴联苯**** GC- MS method

6 TRIS**** ( TDBPP) 三(2,3-

二溴丙基)磷酸酯*LC – MS method

7 TEPA ****三(吖丙啶基)氧化磷****

LC – MS method

8 Carcinogenic dyes 致癌染料 DIN 54231

37. OPTIONAL TEST PACKAGE BASED ON CASE BASIS ( For EGYPT )

*required for coated leather, artificial leather ( PU, PVC, rubber, EVA), various plastics and printed fabrics.

**only required for metal component

***only required for surface coating, printed fabric and plastic component

****only required for material with flame retardant finishes

Requirements

• Prohibited ( 10 ppm)

• Prohibited ( 10 ppm)

• Prohibited ( 1 mg/l)

• 90 PPM

• New limit; Total Lead in accessible scrapable surface

coatings

- less than 90 ppm for all painted materials & those

with surface coatings (Clothing, footwear, accessories

& home textiles mainly).

• Sum of 6P ( DEHP, DBP, BBP, DIDP, DINP,

DNOP) : 0.1 % ( 1000 PPM)

• 0.5 µg/cm2/week

• Prohibited ( 100 ppm)

• Prohibited ( 10 ppm)

Page 51: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Table 1A- Textile,Apparel & accessories,Home Textile articles.

Table 1B -Rugs & carpets Articals.

Table 1C-Textile Bags and Purses.

Table 1D-Leather Garments, Bags and purses.

Table 1E- General Shoes.

Table1F- Sports shoes.

Table 2-Banned Pesticides.

Table 3-Banned Alleragens dyestuffs.

Table 4-Banned Chlorinated Organic Carriers.

Table 5-Forbidden flame retradants.

Table 6-Forbidden phthalates in children's clothing.

Table 7-Banned Azo colorants.

Table 8-Banned dyestuffs classified to be carcinogenic.

Name &Designation Company name Company Chop

Contact Person:

Email:

Address:

I/We hereby confirm that I/we have read and taken proper care of all Chemical restrictions citied above while Manufacturing Fabric, ordering

TRIMS for Max orders.

GENERAL CERTIFICATE OF CONFORMITY

Phone :

Buyer Name :

Supplier Number:

Please sign this page and return only this page to Max officealong with scan copy to Buyer's

Max reserve the right to cancel the order or, if already delivered, return the goods if any of the statements in Max’s GCC requirements will fail in a test

according to a standard method; and Hold me/us (manufacturer /exporter) responsible for all damages caused by products that do not meet the custom

regulatory requirements of different country where max retails.

This is to confirm to you that we, the below registered company and supplier to Max, adheres to the issued GCC /LCR (General certificate of conformity

/Landmark group's Chemical Restrictions Policy.) I/We commit to comply with Max’s GCC Requirement and acknowledge that Max RetailLLC or their

designated consolidators reserve the right to check any order, by any method, at any stage of production;

We confirm we do not supply product that has any of the banned substances as quoted in the document version MX/GCC/001/2012 which covers the

following categories:-

Department :

Page 52: VERSION EFFECTIVE DATE - maxquality.infomaxquality.info/max_files/Max testing protocol update 29-oct-14.pdf · Type B : 197 +/- 7.5 gsm ... 水洗色牢度 AATCC 61:2010 / SASO 170:2005

Recommended