VM 4535 – VM 6535 VM 4525 - VM 6525
VM-line VERTICAL MACHINING CENTER
With Changeable Heads 5-axes
“BOX-IN-BOX”
Unique closed design of double-beam and cross-slide supports with internal quadruple-guided ram-type milling unit
Overhead gantry portal resulting in high dynamics and precision of machining operations
Repeatable machining results thanks to thermo-symmetric design
Changeable heads (fixed or with B&C axes)
Semi-automatic changing of milling heads
Manual manipulation of milling heads by means of indoor-crane into pick-up position at the right rear end of clamping plate
Automatic pick-up as well as release of milling heads via allowance bottom activated by the operator
Fully automatic solutions for changing the milling heads are possible and subject to discussion
TRIMILL VM 6525 / VM 6535
TRIMILL VM 4525 / VM 5525 / VM 6525 TRIMILL VM 4535 / VM 5535 / VM 6535
1 100 1 100
Machining from top Machining from 5 sides
TRIMILL VM 4525 / VM 5525 / VM 6525 TRIMILL VM 4535 / VM 5535 / VM 6535
Travels
X 3 500, 4 500, 5 500, 6 500 * mm
Y 2 500, 3 500 * mm
Z 1 250 (1 400) mm
Optional Head S1M (fixed) 52kW, 1 000 Nm, 2 500 rpm, HSK 100
Optional Head F5M (positioning), F4M (continuous) 40 kW, 360 Nm, 10 000 rpm, HSK 100 Optional Head T20M (continuous) 34 kW, 67 Nm, 24 000 rpm, HSK 100
Feed rates 20 - 25 000 mm/min
Clamping surface
X 4 500, 5 500, 6 500 *
Y 2 800, 3 800 *
Workpiece weight max. 7 000 kg / m2
Machine weight approx. 66 000 (73 000, 80 000) kg
Machine dimensions 9 200 (10 200, 11 200) x 8 050 (9 000) x 5 700mm
HEADS & SPINDLE DIAGRAMS
Power (S1/100%) Power (S6/40%) Torque (S1/100%) Torque (S6/40%)
S1M
F4M/F5M
T20M
MACHINE STANDARD COMPONENTS
OPTIONAL EQUIPMENT
STANDARD COMPONENTS SUPPLIER
High-frequency Electric Spindles Weiss
Control System Heidenhain, Siemens
Feed Motors Siemens
Measuring Systems Heidenhain, INA
Ball Screws Shuton, SKF, KSK Kurim
Linear Guides THK, Schneeberger
Table Rückle, Sempuco
Electric Cabinet Rittal
Cooling Agregate Rittal
ATC 30/50
High-frequency Finishing Spindle
Workpiece Measuring Tool Measuring
Cooling & Lubrication (external nozzles)
Cooling & Lubrication (CTS – spindle center)
Microlubrication - oil mist (internal & external)
Head S1M (Fixed) Head F5M/F4M
TRIMILL - Kinematics TRIMILL Inform TRIMILL Teleservice
Head T20M (Cont.)
VM 4525 (4535) VM 5525 (5535) VM 6525 (6535) TRAVELS:
X axis 4 500 mm 5 500 mm 6 500 mm Y axis 2 500 (3 500) mm 2 500 (3 500) mm 2 500 (3 500) mm Z axis 1 250 (1 400) mm
1 250 (1 400) mm 1 250 (1 400) mm 1 250 (1 400) mm
TABLE: Clamping surface 4 500 x 2 800 (3 800) mm 5 500 x 2 800(3 800) mm 6 500 x 2 800 (3 800) mm Workpiece weight max. 7 000 kg / m2
HEAD/SPINDLE: Optional Head S1M (fixed)
52kW, 1 000 Nm, 2 500 rpm, HSK 100
Optional Head F5M (positioning), F4M (continuous)
40 kW, 360 Nm, 10 000 rpm, HSK 100
Optional Head T20M (continuous)
34 kW, 67 Nm, 24 000 rpm, HSK 100
B axis RPM (head) 1,5 (F5M) 11 (F4M)
50 (T20M) B axis (head) +/-100° (T20M)
-50/+95° (F5M, F4M) C axis RPM (head) 50 (F4M, F5M, T20C) C axis (head) +/-240° (F5M, F4M, T20M)
AXES ACCELERATION
X-, Y-, Z-axes 1,5 m/s2
Feed rates 20 - 25 000 mm/min
ACCURACY (VDI/DGQ 3441) Positional Max. 0,015 mm Repeatable Max. 0,008 mm
MACHINE DIMENSTIONS: Machine weight approx. 66 000 (67 000) kg 73 000 (74 000) kg 80 000 (81 000) kg Machine dimensions 9 200 x 8 050 x 5 700 mm
(9 200 x 9 000 x 5 700) 10 200 x 8 050 x 5 700 mm
(10 200 x 9 000 x 5 700) 11 200 x 8 050 x 5 700 mm
(11 200 x 9 000 x 5 700) Z axis opening 1 400 mm Distance between walls 3 780 (4 780) mm 3 780 (4 780) mm 3 780 (4 780) mm
TECHNICAL DATA
TRIMILL, a. s. Louky 304 764 32 Zlín Czech Republic E-mail: [email protected] Tel.: +420 577 112 111 www.trimill.cz
TRIMILL GmbH Almestr. 6 33649 Bielefeld Germany E-mail: [email protected] Tel.: +49 521 522 888-0 www.trimill.de
TRIMILL, a. s. – Shanghai office Rm 729–731 Summit Center 1088 West Yan'an Road Shanghai 200052 E-mail: [email protected] Tel.: +86 21 6210 1163-605
TRIMILL, a. s. – India office B-7, 1st floor, Sector-64 Noida-201307, U.P. INDIA E-mail: [email protected] Tel.: +91 120 421 4402 www.trimill.cz