— view
System pro E power185 mm Busbar System up to 2000A
S yS te m pro e p ow e r 3
—185 mm Busbar System
The ABB range of metal enclosures for main distribution is now enhanced with the new System pro E power Energy Distribution. The columns have a functionalheight of 1800, 2100 mm and a functional depth of 300 and 500 mm. Threewidths can be selected (functional 500, 750 and 1000 mm)depending on the device type and quantity.
—Security• Tested to IEC 61439-1/-2• Installation of the surge arrester in compliance
with IEC 61439-1/-2• IPXXB touch guard covers
—Modularity• Installation to different cabinet size• Assembly to WR mounting frame• Rated current up to 2000A, short-time with-
stand current up to 75 kA Compatibility
—Efficiency• MBB and DBB in one system• High packing density• Compact design• Save at least 50% of copper
—Compatibility• Combination possible with standard CombiLine N modules• Easy connection between equipment and the
185 mm busbar system• Installation of MCCBs Tmax and ACBs Emax 2• Installation of fuse switch disconnectors InLine
II and switch disconnectors fuse SlimLine XR
Space saving
Footprint optimization thanks to width section designed to optimize breaker dimensions
EfficiencySpeed up your projects
Easy to be configurated with full compatibility with ABB devices.
ProductivitySafety and protection
Type tested solution up to 6300A and 150kA
Reliability
4 S yS te m pro e p ow e rS yS te m pro e p ow e r 4
S yS te m pro e p ow e r 55 S yS te m pro e p ow e r5 S yS te m pro e p ow e r
6 S yS te m pro e p ow e r
—185 mm Busbar System
—Circuit breaker zoneSystem to connect breakers and mBB• Connection points are prepared before and behind the breaker• Possible installation of the CT’s before or behind the breaker
Also available: multi-breaker panels• Also available: outgoing modules for multiple
breakers
—Surge arrester deviceprefuse• It is possible to assemble the prefuse for the
surge arrester device directly and without further wiring to the busbar system
Varistor replacement at the surge arrester device• Replacement is possible without the need to remove the cover Function display of the surge arrester• Visible through the cover
Assembling the surge arrester• Vertical assembly for optimum cable routing
—Customer wiring spacewiring options• Optimal space for cable connections• Generous wiring space• Rails with high short circuit withstand strength
Central earthing point (Cep)• Standard-compliant central earthing point• Possibility to integrate CT’s
—Outgoing sectionsBlind covers• Blind covers for reserve spaces - 50 mm and 100 mm wide
High packing density• Increased packing density for outgoing sections• Cut-out in the covers
—Partitions / touch guardVertical cabinet to cabinet separation walls• To separate the sections
Horizontal touch guard• Touch guard to the main busbar system
—Busbar guideCabinet to cabinet connection• Good accessibility for the connecting bolts• Easy cabinet to cabinet connectors• Corner section to optimize the layout
Compact design of the coupler section• Busbar set up on the same level
—N/PE busbar guideHorizontal busbar guide• N/PE connections in staggered arrangement• Optimal connecting possibilities• Connection space above and beneath equip-
ment available
Vertical busbar guide• Connection busbars from the top to the bottom
—Contact
ABB SACEA division of ABB S.p.A.Automation and Distribution BoardsVia Italia, 5823846 Garbagnate Monastero (LC) - ItalyTel: +39 031 3570.111Fax: +39 031 3570.228www.abb.com
Due to possible developments of standards as well as of
materials, the characteristics and dimensions specified in this
document may only be considered binding after confirmation
by ABB SACE.
© Copyright 2017 ABB. All rights reserved. 1ST
C8
030
08
B0
20 -
09/
2017