2
• Color-coded EM distoron warnings • Offset locate modes - Vector and Plan View • Oponal receiver/transmier link • Cloud-based data warehousing • Internal data logging • Oponal Bluetooth connecvity UTILITY LOCATOR vLoc3-Pro www.vivax-metrotechaus.com | [email protected] The vLoc3-Pro ulity locator introduces new innovave tools for locang buried ulies assuring damage prevenon while gathering informaon for analysis. With two sets of screened 3D antennas signal distoron is easily detected and displayed on the bright full color display. Along with classic locate screens the vLoc3 series locators offer new locate perspecve screens of Vector Locate for fully automac non-walk over locang, Transverse Graph showing both peak and null simultaneously providing immediate measurement of signal distoron, Plan View showing the relave orientaon of the cable at any angle, and a new graphical Sonde screen with guidance arrows leading to the sonde locaon even when it is vercal. The highly user configurable vLoc3 series contains eight passive locate modes, fault-find mode, SD (showing direcon of outgoing current), and a range of configurable frequencies from 16Hz to 200 kHz. Visual and mechanical vibraon alerts can also be configured by the user providing warnings for shallow depth, overload, overhead cables, and excessive swinging. Plug-in-play opons for the receiver include oponal Bluetooth module usable with external GPS devices and MLA (marker locator adapter) to locate buried markers. Accessory and charging socket Oponal radio link to receiver and transmier Rechargeable Li-ion baery or six x AA Alkaline USB Data Port Two sets of 3D antennas Oponal plug-in MLA marker locator Weatherproof speaker High visibility 4.3”/10cm LCD High impact ABS injected molded housing 3’9” 57.2 512Hz 27dB 43mA Classic Screen - as in previous vLoc locators, with the addion of three color-coded distoron levels 512Hz 2’4” 4’2” 0 2’ 43.3mA Vector Locate - shows orientaon, line posion, and distance relave to the locator in 3D 3’9” 33dB 14.1mA 8.19kHz Transverse Plot Screen - is used to display the peak and null to compare distoron shape 14’5’’ 12.9mA 32.8kHz Plan View Screen - displays the theorecal line in 2D from above ground in omnidireconal mode Sonde Screen - arrow guidance showing direcon to the sonde and depth of cover Oponal Bluetooth module
