Volute pumps M - teral.info

E-CAT5-P-Me-06-A

50Hz

Volute pumps

M

■Standard specifications ■Standard accessories

■Special specifications

■Special accessories

* Please note that some of the devices in the photo may differ from actual devices in coating color, etc.

■Applications

■Features

●General water supply for buildings, condominiums, etc.

●Circulation of cold/warm water

●Conveyance of industrial water

●Conveyance and distribution of tap water

●Irrigation of paddies and fields

●Water sprinkling

●Other uses

①Energy-saving pump with a Top Runner efficiency (equivalent to IE3) motor.②High performance through the adoption of volute structure (special vortex

chamber).③We offer reliability with our many years of manufacturing experience.④Best suited for var ious devices for high-pressure washing and

high-pressure transfer.⑤Compatible mounting dimensions with conventional pumps. (Different in

some model types)

Sluice valve, check valve, foot valvePressure gaugeControl panelVibration isolator

Motor ……………………………………………………………………………1Common base …………………………………………………………………1Companion flange (packing, bolt, and nut included) …………………2 setsPriming funnel (cock included) ………………………………………………1Coupling ……………………………………………………………………1 setCoupling cover …………………………………………………………………1

■Supplementary table

4050658040506510040506580100125150

～ 4～ 4～ 4～ 35, 65, 65, 62

7～7～5～4～3～AllAll

Sealed ball bearing

Open ball bearing

Duplex open ball bearing

Duplex angular bearing

SUS304

SUS304

SUS304

CAC406 or equivalent



SUS403 JIS 10K thin type

S45C(Shaft sleeve:

CAC 406)

Suction side:JIS 10K thin type

Discharge side:JIS 10K

standard type

Nominal diameter

mm

Number of stages

Flange spec.Bearing Material

Suction side Discharge side Impeller Motor shaft

■Description of types

1.37MPa − or 0.29MPa, whichever is lower

Shutoff total head

102

Fresh water0～80˚C

−6m

ClosedGland packing

See the table belowSee the table belowSee the table below

FC200Top Runner efficiency (equivalent to IE3)

Direct-on-Line start 7.5kW or lessStar-delta start 11kW or more

Totally enclosed fan-cooled indoor type3-phase / 200V

1500min-1

See the table below7.5BG5/1.5

Liquid qualityLiquid temperature

ImpellerShaft sealBearingImpeller

Motor shaftCasing

Efficiency

Starting method

TypePower source

Synchronous rotation speed

Pumping liquid

Structure

Material

Motor

Total suction head(In case of 20°C)

Allowable boost pressure

Flange specPaint color

*1 Bore 40 to 65 is available only for five or more stages, and bore 80 is available only for four or more stages. Bore 100 or more is available for all stages.* Please note that in case of special specifications, the assembly drawing, etc., may differ from the standard drawing.

Structure

Material

Motor

Paint

ImpellerMotor shaftShaft seleeveOtherTypePower supply

Drain (below gland/below casing)With flywheel 3kgf·m2 / 5kgf·m2 (5.5kW or more)/8kgf·m2 (bore 65 11kW or more)Sealed coupling coverSuction port reverse directionNo common baseCAC406 (nominal diameter 40, 50)SUS304SUS304*1

All steel madeTotally enclosed fan-cooled outdoor typeVoltage changeSpecified color for outer surface, salt-resistant paint, heavy-duty salt-resistant paint, Japan Sewage Works Agency specifications

M 100 - 4 - 5 18 A H - e

①Type②Sucition/Discharge nominal diameter

③No. of stages④Frequency 5：50Hz 6：60Ｈz

⑤Output⑥In-house symbol

⑦Performance code None：Standard H：According to customer specified point⑧Equipped with a Top Runner motor (equivalent to IE3)

① ② ③ ④ ⑤ ⑥ ⑦ ⑧

M4-pole, multi-stage direct coupled typeVolute pumps

2

Discharge rate (m3/min)

Total head (m)

■Selection chart

M-50

M-65

M-100

M-125

M-150

0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 1.0 1.5 2.0 2.5 3.0 3.5

130

140

120

110

100

90

80

70

60

50

40

30

20

15

12

According to customer specified point

〈50Hz〉Synchronous rotation speed 1500min-1

M-40

Ⅹ（5.5）Ⅹ（5.5）Ⅸ（5.5）Ⅸ（5.5）Ⅷ（3.7）Ⅷ（3.7）

Ⅵ（3.7）Ⅵ（3.7）

Ⅶ（3.7）Ⅶ（3.7）

Ⅴ（2.2）Ⅴ（2.2）

Ⅲ（1.5）Ⅲ（1.5）

Ⅲ（2.2）Ⅲ（2.2）

Ⅳ（2.2）Ⅳ（2.2）

Ⅳ（3.7）Ⅳ（3.7）

Ⅴ（3.7）Ⅴ（3.7）

Ⅵ（5.5）Ⅵ（5.5）

Ⅶ（5.5）Ⅶ（5.5）

Ⅷ（5.5）Ⅷ（5.5）

Ⅷ（11）Ⅷ（11）

Ⅶ（11）Ⅶ（11）

Ⅵ（7.5）Ⅵ（7.5）Ⅵ（7.5）Ⅵ（7.5）

Ⅴ（7.5）Ⅴ（7.5） Ⅳ（11）

Ⅳ（11）

Ⅳ（18.5）

Ⅳ（18.5）

Ⅳ（22）Ⅳ（22）

Ⅳ（30）Ⅳ（30）

Ⅲ（22）Ⅲ（22）

Ⅲ（55）Ⅲ（55）

Ⅲ（45）Ⅲ（45）

Ⅱ（37）Ⅱ（37）

Ⅱ（30）Ⅱ（30）

Ⅱ（15）Ⅱ（15）

Ⅳ（37）

Ⅳ（37）

Ⅲ（30）

Ⅲ（30）

Ⅱ（18.5）

Ⅱ（18.5）

Ⅴ（30）Ⅴ（30）Ⅴ（22）

Ⅴ（22）Ⅳ（18.5）Ⅳ（18.5）

Ⅳ（7.5）Ⅳ（7.5）

Ⅳ（5.5）Ⅳ（5.5）

Ⅱ（5.5）Ⅱ（5.5）

Ⅱ（7.5）Ⅱ（7.5）

Ⅱ（11）Ⅱ（11）

Ⅲ（7.5）Ⅲ（7.5）

Ⅲ（15）Ⅲ（15）

Ⅲ（5.5）

Ⅲ（5.5）Ⅲ（3.7）Ⅲ（3.7）

Ⅱ（3.7）Ⅱ（3.7）

Ⅱ（3.7）Ⅱ（3.7）

Ⅱ（2.2）Ⅱ（2.2）

Ⅷ（18.5）Ⅷ（18.5）

Ⅶ（18.5）

Ⅶ（18.5）

Ⅶ（15）Ⅶ（15）

Ⅵ（15）Ⅵ（15）

Ⅴ（11）Ⅴ（11）

Ⅸ（11）Ⅸ（11）

Ⅸ（15）Ⅸ（15） Ⅴ（22）

Ⅴ（22）

Ⅸ（7.5）Ⅸ（7.5）

Ⅹ（7.5）Ⅹ（7.5）

Ⅷ（7.5）

Ⅷ（7.5）

Ⅱ（1.5）Ⅱ（1.5） Ⅱ（1.5）

Ⅱ（1.5）

M-80

P-3-58137-0

M 4-pole, multi-stage direct coupled type Volute pumps

3

■Specification table

40

50

65

80

M40-2-51.5-eM40-3-51.5-eM40-4-52.2-eM40-4-52.2H-eM40-5-52.2-eM40-5-52.2H-eM40-6-53.7-eM40-7-53.7-eM40-7-53.7H-eM40-8-53.7-eM40-8-53.7H-eM40-9-55.5-eM40-10-55.5-eM50-2-51.5-eM50-3-52.2-eM50-4-53.7-eM50-5-53.7-eM50-6-55.5-eM50-7-55.5-eM50-8-55.5-eM50-8-57.5-eM50-9-57.5-eM50-10-57.5-eM65-2-52.2-eM65-2-52.2H-eM65-2-53.7-eM65-2-53.7H-eM65-3-53.7-eM65-3-53.7H-eM65-4-55.5-eM65-4-55.5H-eM65-5-57.5-eM65-5-57.5H-eM65-6-57.5-eM65-6-57.5H-eM65-7-511-eM65-7-511H-eM65-8-511-eM65-8-511H-eM65-9-511-eM65-9-511H-eM65-9-515-eM65-9-515H-eM80-2-53.7-eM80-2-53.7H-eM80-2-55.5-eM80-2-55.5H-eM80-3-55.5-eM80-3-55.5H-eM80-3-57.5-eM80-3-57.5H-eM80-4-57.5-eM80-4-57.5H-eM80-4-511-eM80-4-511H-eM80-5-511-eM80-5-511H-eM80-6-515-eM80-6-515H-eM80-7-515-eM80-7-515H-eM80-7-518-eM80-7-518H-eM80-8-518-eM80-8-518H-e

23

4

5

6

7

8

91023456788910

2

2

3

4

5

6

7

8

9

9

2

2

3

3

4

4

5

6

7

7

8

1.51.5

2.2

2.2

3.7

3.7

3.7

5.55.51.52.23.73.75.55.55.57.57.57.5

2.2

3.7

3.7

5.5

7.5

7.5

11

11

11

15

3.7

5.5

5.5

7.5

7.5

11

11

15

15

18.5

18.5

0.140.140.14-0.12-0.140.14-0.14-0.140.140.2250.2250.2250.2250.2250.2250.2250.280.2250.2250.34-

0.355-0.30-

0.355-

0.355-0.28-

0.355-

0.355-

0.225-0.40-

0.50 -0.56-0.56-0.56-0.44-0.56-0.56-0.56-0.56-0.71-0.56-

17.025.033.0-42.0-50.055.3-63.4-75.083.019.028.037.045.056.062.975.061.084.093.019.0-21.3-34.3-47.0-58.0-70.2-72.3-83.0-113-83.7-

21.9 -

28.0 -

29.9 -

38.4 -

48.2 -

56.0 -

70.0 -

84.0 -

98.0 -

82.0 -112-

125

150

M100-2-57.5-eM100-2-57.5H-eM100-2-511-eM100-2-511H-eM100-3-515-eM100-3-515H-eM100-4-518A-eM100-4-518AH-eM100-4-518B-eM100-4-518BH-eM100-4-522-eM100-4-522H-eM100-5-522AH-eM100-5-522B-eM100-5-522BH-eM100-5-530-eM100-5-530H-eM125-2-515-eM125-2-515H-eM125-2-518-eM125-2-518H-eM125-3-522-eM125-3-522H-eM125-3-530-eM125-3-530H-eM125-4-530-eM125-4-530H-eM125-4-537-eM125-4-537H-eM150-2-530-eM150-2-530H-eM150-2-537-eM150-2-537H-eM150-3-545-eM150-3-545H-eM150-3-555-eM150-3-555H-e

2

2

3

4

4

4

5

5

5

2

2

3

3

4

4

2

2

3

3

7.5

11

15

18.5

18.5

22

22

22

30

15

18.5

22

30

30

37

30

37

45

55

0.80 -

0.90 -

0.90 -

0.90 -

0.80 -1.0 --

0.70 -1.0 -1.4-1.4-1.4-1.4-1.4-1.4-2.0 -2.25-2.0 -2.25-

30.0 -

39.0 -

58.5 -

68.0 -

75.5 -

68.5 --

92.7 -

80.0 -

34.0 -

41.0 -

51.7 -

61.0 -

69.1 -

81.3 -

50.8 -

52.3 -

81.6 -

86.0 -

100

Specifications SpecificationsNominaldiametermm

OutputkW Discharge rate

m3/minTotal head

mType Number

of stages

Nominaldiametermm

OutputkW Discharge rate

m3/minTotal head

mType Number

of stages

Note) The specification for the types with "H-e" at the end will depend on the required specific point.


4

Flange dimensions: JIS 10K thin type or equivalent

■Assembly drawing

Plug ⅜B

Drain plug T

Rotation direction

55

4×M12 Recommended foundation bolt

250

Drain hole ⅜B

4×φBDFoundation bolt hole

Priming plug

Coupling cover

Drain hole ⅜B

Drain plug T

Drain plug V×¼B

（L）

3 B A P φd

C

φd

DE

H

40

BP

BM

BR

F

BX

BN

BL

BY

Plug ⅜B

Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer. The coupling cover is included in the standard accessories.

(Unit: mm)■Dimensions

*Mounting dimension is compatible with M type (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame No. is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, pay attention to the following. The rotation speed of the motor increases because of its characteristics. Therefore, adjust the flow rate and use the product so that the current should not exceed the rated current.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.

M40-2-51.5-eM40-3-51.5-eM40-4-52.2(H)-eM50-2-51.5-eM50-3-52.2-eM50-4-53.7-eM65-2-52.2(H)-eM65-2-53.7(H)-eM65-3-53.7(H)-eM65-4-55.5(H)-eM80-2-53.7(H)-eM80-2-55.5(H)-eM80-3-55.5(H)-eM80-3-57.5(H)-e

122175228122175228175175240305195195265265

231231231231231231253253265290287287287287

175175175175175175195195195195210210210210

210210210210210210245265245265255265265265

195195195195195195210210210210230230230230

405405405405405405455475455475485495495495

12312311231122

54771385411213565551281637262124112

167167167167167167182182182182182182182182

135165157135130160160170160190160170175190

256256256256256256296296296296296296290296

236236256236256284256286286316286316310316

296296296296296296336336336336336336330336

276276296276296324296326326356326356350356

9310512492117143142153168229155193209216

¼B¼B¼B¼B¼B¼B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B

8358889958359421010979994107112311048111811871225

1616161616161515151515151515

696749825696772852780800860995833872936981

426419511426512532436430516615513532586601

1.51.52.21.52.23.72.23.73.75.53.75.55.57.5

40

50

65

80

A B C D E HF L P T VType

Pump / Motor Common baseOutputkW

Approx.mass

kg

Nominaldiameter

d BD BL BM BN BP BR BX BY


5

Flange dimensions : Suction side ...... JIS 10K thin type or equivalent : Discharge side ... JIS 10K standard type or equivalent

■Assembly drawing


Plug ⅜B

Drain plug T

Rotation direction

55

4×M12 Recommended foundation bolt

250

Drain hole U

４×φBD

Foundation bolt hole

Priming plug

Coupling cover

Drain hole U

Drain plug T

Drain plug V×¼B

(L)

Plug ⅜Ｂ

BP

BR

φd

C

φd

40DE

H

BM

PAB3

BX

BY

BN

BL

F

(Unit: mm)■Dimensions

*Mounting dimension is compatible with M type (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame No. is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, pay attention to the following. The rotation speed of the motor increases because of its characteristics. Therefore, adjust the flow rate and use the product so that the current should not exceed the rated current.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.

M40-5-52.2(H)-eM40-6-53.7-eM40-7-53.7(H)-eM40-8-53.7(H)-eM40-9-55.5-eM40-10-55.5-eM50-5-53.7-eM50-6-55.5-eM50-7-55.5-eM50-8-55.5-eM50-8-57.5-eM50-9-57.5-eM50-10-57.5-eM65-5-57.5(H)-eM65-6-57.5(H)-eM65-7-511(H)-eM65-8-511(H)-eM65-9-511(H)-eM65-9-515(H)-eM80-4-57.5(H)-eM80-4-511(H)-eM80-5-511(H)-eM80-6-515(H)-eM80-7-515(H)-e

281334387440493546281334387440440493546370435500565630630335335405475545

249249282282274282249249282282282274282296296296296296296293293293307307

175175175175175175175175175175175175175195195195195195195210210210210210

210210220220235235210210250250250260235275275275285280280265265275285280

195195195195195195195195195195195195195210210210210210210230230230230230

405405415415430430405405445445445455430485485485495490490495495505515510

456789456778945678833456

191241284337370423188241284312297340373223288338393438438182182244302344

211211211211211211211211211211211211211215215215215215215215215215215215

157160170170190190160160170195210220240195195210220240240190190195210240

256256256256256256256256256256256256256296296296296296296296296290296300

256286286286316316284306316316316316316316316366366366366316366360366380

296296296296296296296296296296296296296336336336336336336336336330336344

296326326326356356324346356356356356356356356406406406406356406400406424

144170184199248257160207225230238251256264280385410428442256338372401420

¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B

¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B

111011781264131714321493112512481334138714251470153113721438165817231788181813351490156016741744

161615151515161615151515151515151515151515151516

90095910441097119012409059951083113611741230128010991164131413791444149010511136120013351410

5646397047578108605856757437467547908007097748949399641010671756831915930

2.23.73.73.75.55.53.75.55.55.57.57.57.57.57.5111111157.511111515

40

50

65

80

A B C D E HF L P T U V BD BL BM BN BP BR BX BYType

Pump / Motor Common baseOutputkW

Nominaldiameter

d

Approx.mass

kg


6

■Dimensions

■Assembly drawing


(Unit: mm)

3 307 A

F

215

380

BN

440

BM

BL

4×φ19


Priming plug

Plug ⅜B

(L)

Coupling cover

Drain hole ⅜B

Drain plug

V×¼B

Drain plug ⅜B

Drain hole ⅜B

210

Rotation direction

Drain plug ⅜B

Plug ⅜B

230

φ80

φ80

320

550

315

4×M16 Recommended foundation bolt 70

*Mounting dimension is compatible with M model (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame number is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, please keep the following in mind. The number of revolutions will increase because of the characteristics of the motor, which may cause the flow rate to exceed the rated current value.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.


M80-7-518(H)-eM80-8-518(H)-e

545615

67

335415

250240

468491

17431813

14101480

9101000

18.518.5

80

TypePump / Motor

A F L VNominaldiameter

Common base

BL BM BNOutput

kWApprox. mass

kg


7

■Assembly drawing


■Dimensions (Unit: mm)

*Mounting dimension is compatible with M model (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame number is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, please keep the following in mind. The number of revolutions will increase because of the characteristics of the motor, which may cause the flow rate to exceed the rated current value.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.

φd

ED

H

40

C

φd

Plug ⅜B

Drain plug ⅜B

FL

FB4×FD Recommended foundation bolt

PA

Priming plug

Plug ⅜B

Coupling cover

Drain hole ⅜B

Drain plug ⅜B

F

(L)

BＱ

BP

BX

BNBM

BL

BR

BY

4×φBD


Drain hole ⅜B

Drain plug V


M100-2-57.5(H)-eM100-2-511(H)-eM100-3-515(H)-eM100-4-518A(H)-eM100-4-518B(H)-eM100-4-522(H)-eM100-5-522AH-eM100-5-522B(H)-eM100-5-530(H)-eM125-2-515(H)-eM125-2-518(H)-eM125-3-522(H)-eM125-3-530(H)-eM125-4-530(H)-eM125-4-537(H)-eM150-2-530(H)-eM150-2-537(H)-eM150-3-545(H)-eM150-3-555(H)-e

225225310395395395480480480260260360360460460310310425425

347347364366366366371371371351351348348357357367367415415

250250250250250250250250250280280280280280280315315315315

300300310330330330330330330345345345345345360410410410410

270270270270270270270270270300300300300300300350350350350

570570580600600600600600600645645645645645660760760760760

1×⅜Ｂ1×⅜Ｂ2×⅜Ｂ3×⅜Ｂ3×⅜Ｂ3×⅜Ｂ4×⅜Ｂ4×⅜Ｂ4×⅜Ｂ1×⅜Ｂ1×⅛Ｂ2×⅛Ｂ2×⅛Ｂ3×⅛Ｂ3×⅛Ｂ1×⅜Ｂ1×⅜Ｂ2×⅜Ｂ2×⅜Ｂ

9898178243243243305305305150150225175275180187152237222

243243243243243243243243243257257257257257257300300300300

190190195220220220240240240195195220270270370205240270285

346346346355355355355355355360360360360360360420420420420

316376366415415415415415415386425425425420470425470470520

396396396400400400400400400410410410410410416470480480480

366426416460460460460460460436475475475470526475530530580

55555555555555555570707070707070909070

M12M12M12M12M12M12M12M12M12M16M16M16M16M16M16M16M20M20M16

250250250250250250250250250315315315315315315315400400315

294360424502502511554554568441476549561603706635726834946

3333333343334444444

1306146115931680168016801770177018091545154416411680178919501692185320162025

18181816161616161620202020202020242420

1022112512531360136013601430143014701220122013201360146015601310138015401570

64272786389289289295095099083083088082092090090090010001000

7.5111518.518.5222222301518.52230303730374555

100

125

150

A B C D E HF L P Q V BD BL BM BN BP BR BX BY FB FD FLType

Pump / Motor Common base Foundation boltOutputkW

Nominaldiameter

d

Approx.mass

kg


8

■Example of sectional drawing

■Parts list

●Nominal diameter 40mm (2 to 4-stage) ●Nominal diameter 50mm (2 to 4-stage)

No. Part name Qty Material12345678910111213141516171819202122

Suction casingDischarge casingIntermediate casingFirst stage impellerImpellerFinal stage impellerBearing coverBearing coverBearing coverBearing coverMain shaftSpacerBearing holderImpeller nutPacking bushingIntermediate bushingLiner ringLantern ringPacking retainerKeyKeyKey

11

n-11

n-21111111111

n-1n12

n-111

FC200FC200FC200

SUS304SUS304SUS304FC200SS400SS400SS400

SUS403CAC406FC200

SUS304CAC406CAC406CAC406CAC406CAC406SUS304SUS304

S45C

n: Number of stages


KeyBall bearingBall bearingDeflectorGland packingO-ringO-ringRetaining ringSupporter ringSplit ringSplit ringThrough boltSealing pipeNippleElbowAir vent plugWasherConduit jointPlugPlugDrain plugDrain plug

11129n2112141112122

n-12

n-1

S45CSUJ2SUJ2CR-

NBRNBRSUP3SK3

SUS304SUS304SS400

SUS304SS400FCMBC3604

SUS304S45C

SWCHSWCHSWCHSWCH

３５３７３６

２３

７

３０

２４１３１３２３８２８３

２０

１６１２１４２３３１５

１９

１１

２５

２６２７３９２１１７２９１８

２６２２３１

４０

３４

Seal water piping

８１０

９

４

５６

４２４１

４３４４


9

■Example of sectional drawing

■Parts list

●Nominal diameter 100mm (3-stage or more) ●Nominal diameter 125mm, 150mm


Suction casingDischarge casingIntermediate casingImpellerBearing caseBearing coverBearing coverBearing coverBearing coverMain shaftBearing holderBearing holderBearing collarBearing collarShaft sleeveShaft sleeveSleeve nutPacking bushingIntermediate bushingDischarge bushingLiner ringLantern ringPacking retainerKey

11

n-1n11111111111111

n-11n121

FC200FC200FC200

Equivalent to CAC406*FC200FC200FC200FC200FC200S45CFC200FC200SS400SS400

CAC406CAC406CAC406CAC406CAC406CAC406CAC406CAC406CAC406

S45C

*Low-lead material


KeyKeyAngular bearingBall bearingDeflectorDeflectorGland packingO-ringO-ringO-ringThrough boltBearing nutBearing nutBalance pipeAir vent plugGrease nippleBearing washerBearing washerConduit jointPlugPlugDrain plugDrain plug

n-1111119n12411122112212

n-1

S45CS45CSUJ2SUJ2CRCR-

NBRNBRNBR

SS400SS400SS400

SUS304C3604C3604SS400SS400S45C

SWCHSWCHSWCHSWCH

２６

４０７１１５３８１９４３２１３２２０１６２

１７

９

２８

１２３０５１８２５２４２３

３４２９２７１３

３７

４２

１４

８

６

３６

４１

１１

３５３３

１０

４３３１

２２

Ａ

４５３９４７４６

４４

A-view

n: Number of stages


10

MEMO

,　 Please note that product specifications are subject to change for improvement without prior notice.

TERAL INC.Head Office 230, Moriwake, Miyuki-cyo, Fukuyama-city, Hiroshima, 720-0003, Japan

Tel.+81-84-955-1111 Fax.+81-84-955-5777www.teral.net

Teral Asia LimitedRoom 1001,10/F, Olympia Plaza, 255 King's Road, North Point, Hong Kong

Tel.+852-2571-0935 Fax.+852-2571-0619

TERAL THAI CO.,LTD.150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand

Tel.+66-3535-2148-9 Fax.+66-3535-2150

TERAL TRADING & SERVICE CO.,LTD. 150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand

Tel.+66-3535-2145-7 Fax.+66-3535-8549

Teral Malaysia Sdn.Bhd. 10, Jalan SS13/6A, Subang Jaya Industrial Estate, 47500, Subang Jaya, Selangor D.E, Malaysia

Tel.+60-3-5611 5775 Fax.+60-3-5612 5775

PT.Teral Indonesia Pumps and Fans Jalan BSD Sektor XI Taman Tekno, Block G3 No.8, Setu Tangerang Selatan, Banten, Indonesia 15314

Tel.+62-21-29665778 Fax.+62-21-75673913

Teral Vietnam Limited Liability Company 9th Floor, LADECO Building, No. 266 Doi Can Street, Lieu Giai Ward,Ba Dinh District, Hanoi City, Vietnam

Tel.+84-24-393-52-790 Fax.+84-24-393-52-289

Teral General Machine (Shanghai) Co.,Ltd. No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 201109, China

Tel.+86-21-6490-9128 Fax.+86-21-6490-9126

Teral-Aerotech Fans Private Ltd. Plot No.188-189, Ecotech Extension-1, Surajpur Kasna Road, Greater Noida-201306, Uttar Pradesh, India

Tel.+91-9810162210, +91-9310162210

Teral Middle East F.Z.C. 1806-002, 18th floor, BB1, Mazaya Business Avenue, JLT, Dubai, UAE. PO Box 414781

Tel.+971-4369 9039

Teral Pumps & Fans North America Ltd. Suite # 197, 800-15355 24 Ave Surrey, B.C., CANADA V4A 2H9

Tel.+1-604-839-1008

Teral Philippines Inc. Roof Deck 3, Vernida 1 Building, 120 Amorsolo St., Legaspi Village, Makati City

Tel.+63 2 7717-9314

2021 10

E-CAT5-P-Me-06-A

Date post:	30-Oct-2021
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

Volute pumps M - teral.info

Documents