DEBURRINGCUTTINGPUNCHING DRILLINGw w w . a l f r a . d e

AMT 150 / AMTE 200 / AMTE 250ALFRA Mounting tables

AMT 150 AMTE 200 AMTE 250Prod.-No. 03100; ITC 505.310 031002; ITC 505.340 031001; ITC 505.360

Simple and variable fixing of mounting plates using quick-acting clamps.

✔ ✔ ✔

Intelligent clamping system permits the unrestricted processing of the complete mounting plate

✔ ✔ ✔

Continuously adjustable from verti-cal to horizontal position by hand crank or cordless drill by battery-operated electric motors by battery-operated electric motors

Continuous height adjustment using angle of tilt using angle of tilt by battery-operated electric motors by battery-operated electric motors

Electric motor - ✔ ✔

Battery operation - ✔ ✔

Adjustable angle of tilt 0 - 80° 0 - 80° 0 - 80°

Working height fixed: 90 cm fixed: 80 cm variable: 80 - 110 cm

4 lockable casters ✔ ✔ ✔

Max. size of mounting plates W x H 1,100 x 1,900 mm 1,100 x 1,900 mm 1,100 x 1,900 mm

Max. load-bearing capacity 200 kg 200 kg 300 kg

Space required: 1,400 x 1,200 mm 1,400 x 1,200 mm 1,400 x 1,200 mm

Weight 83 kg 93 kg 140 kg

Scope of supply

Mounting Table AMT 1502 x clamping unit with screw

2 x clamping unit with quick releaseScrew adapter for operation with cordless drill

Electrical Mounting Table AMTE 200 2 x clamping unit with screw

2 x clamping unit with quick releaseExternal charger for the battery

Electrical Mounting Table AMTE 250 2 x clamping unit with screw

2 x clamping unit with quick releaseExternal charger for the battery

OpTiOns OpTiOns fOr AMTE 250

ExTEnsiOn sETTable extension for the horizontal support of

mounting plates Prod.-No. 03100-001

ClAMping uniT wiTh quiCk rElEAsE

Prod.-No. 03100-003

ClAMping uniT wiTh sCrEw

Prod.-No. 03100-002

COnTrOl CAbinET sETProd.-No. 03100-005

guidE fOr wirEProd.-No. 031001-003

rOllEr COnvEyOrfor the insertion of the mounting plateinto the control cabinet from the side

Prod.-No. 031001-004wirE rOll hOldErProd.-No. 031001-002

OpTiOn fOr AMT 150 OpTiOns fOr AMTE 200 / 250sCrEw AdApTEr AMT 150for operation with cordless drill

Prod.-No. 03100-004

spArE bATTEryProd.-No. 031001-001

ChArging plug fOr 110 v 60 hz

Prod.-No. 031001-0011

AlfrA Mounting Tables

Printed in Canada; 17-04 EC-1708-0