Date post: | 03-Apr-2018 |
Category: |
Documents |
Upload: | hartono-subagio |
View: | 221 times |
Download: | 0 times |
of 45
7/28/2019 Wall Ceiling
1/45
W&CRENEWAL CYCLE
BEGINS IN MAY.
TO KEEP YOUR
ISSUES COMING RENEW TODAY!
RENEW NOW AT
www.WConline.com/renewal
DID YOU KNOW?
H I G H P E R F O R M A N C E B U I L D I N G E N V E L O P E I S S U E
May 2013 | Volume 76, Issue 5 | The Voice of the Industry Since 1938| www.wconline.com
ENERGY-RELATED
CHANGES AHEAD
CONSTRUCTION APPS
FOR THE INDUSTRY
AIR BARRIER MEMBRANES
USED SEASIDE
PILLAR CONSTRUCTIONUTILIZES EIFS
THEVOICEOFTHEINDUSTRYSINCE1938
TH N
yearsWALLS
&CEILING
S
7/28/2019 Wall Ceiling
2/45
Technical Info: 1-800-NATIONAL or visit purpleproducts.info
The color PURPLE is a registered trademark of National Gypsum Properties, LLC
Garage walls can really take a beating from car doors, baseball bats, garden tools,or as we call it life. Which is why Hi-Impact XP PURPLE drywall from National Gypsumwas specifically engineered to be dent- and damage-resistant. Meaning these walls can standup to whatever life dishes out.
A WHOLE NEW WAY
TO LOOK AT WALLS
7/28/2019 Wall Ceiling
3/45
www.MarinoWARE.comSales: 800.627.4661
When you buy ViperStud from Marino\WARE, you get
G40 galvanized steel. If you want G40 galvanized from
the other guys, you might have to ask for it!
Specify No EQ Coatings to ensureyou get true G40 galvanized.
Be Wise. Build with G40Galvanized Drywall Studs.
Certified Steel Stud Association
7/28/2019 Wall Ceiling
4/454 | Walls & Ceilings | May 2013
columns
06 Up Front by Mark Fowler
34 Stucco Stop by Albert Carrillo
36 Straight Green by Chris Dixon
departments
10 Trade News
14 Product Focus
41 Classified Marketplace
42 Advertiser Directory
1622
may
on the coverMembers of Pillar Constructions team
(From top to bottom, left to right): Maher Chalabi,
Gabriel Castillo, David Shomette, Goran Kukic,
Bill Perry and Raja Khoury. Photo by Architectural
Photographer Dan Cunningham of Arlington, Va.
VOLUM E 76 NUM BER 5
16 Pillar of the CommunityResort residents find EIFS retrofit makes difference in durability
and energy efficiency.
22 A Tough BarrierAir barrier membrane protects a Florida residence from the
ravages of wind-driven rain and guards against the harmful
effects of moisture and air infiltration.
24 Up-to-Code PerformanceEnergy-related changes are coming for new commercial
buildings. Is the wall and ceiling industry ready?
26 Construction Apps for theModern Day ContractorFind an edge by utilizing construction apps while on the job site.
30 Home FreeThe Zero Energy America homes in Tampa, Fla., inspire a new
way of net-zero livingwith no electric bill.
38 New Product Buzz Guide
features
H I G H P E R F O R M A N C E B U I L D I N G E N V E L O P E I S S U E
May 2013 | Volume 76, Issue 5 | The Voice of the Industry Since 1938 | www.wconline.com
ENERGY-RELATED
CHANGES AHEAD
CONSTRUCTION APPSFOR THE INDUSTRY
AIR BARRIER MEMBRANESUSED SEASIDE
PILLAR CONSTRUCTION
UTILIZES EIFS
THEVOICEOFTHEINDUSTRYSINCE1938
FTH INDUSTRYSIN
yearsWAL
LS
&CEILINGS
Breaking News
W&C Blogs
Web-only Features
Special Sections
W&CArchitect
W&C Digital Edition
Media Kit
White Papers/
Case Studies
ONONTHE WEBTHE WEB www.wconline.comwww.wconline.comReaders can download the mobile
app to snap the mobile tag athttp://gettag.mobi
7/28/2019 Wall Ceiling
5/45
7/28/2019 Wall Ceiling
6/45
armstrong.com/drywal l 1 877 ARMSTRONGF A S T E R . E A S I E R . B E T T E R .
35% less framing compared to conventional transition methods no more stud drops
Eliminates vertical drywall return, corner bead, vertical mud, and sanding
Knurled and slotted integral drywall taping flange for faster finishing
Integral acoustical flange eliminates need for separate acoustical wall angle
Compatible with all types of framing, including Armstrong Drywall Grid and ShortSpan
NSTALLATION SYSTEMS
Be t w een u s , i d eas b ec ome rea l i t y
C E I L I N G & W A L L P A N E L S / S U S P E N S I O N S Y S T E M S / T R I M S & T R A N S I T I O N S / S P E C I A L T Y C E I L I N G S / K I T T E D C L O U D S & C A N O P I E S / S E I S M I C C O M P L I A N C E
Scan to watch video
Armstrong acoustical to drywall transitionmoldings install twice as fast as conventionalmethods saving you time and money
7/28/2019 Wall Ceiling
7/45
FOR THE LATEST INDUSTRY NEWS AND INFORMATION, VISIT US AT
WWW.WCONLINE.COM6 | Walls & Ceilings | May 2013
upFRONT
Our thought process has a lot todo with the change we experience.Also, unique emotions tend to guideus on how we will accept, refuse orinitiate change. The path of changemay be denial as we hold on to whatwe know to be true, and then resistchange at all costs. Some experts pre-dict the younger generation is moreadaptable to change as they rely moreon conceptual thinking than us inthe older generations.
Conceptual thinking is focusingmore on the big picture, being a bitmore creative and searching for newsolutions to old problemsthus cre-ating new opportunities and tak-ing advantage of societal changes.Facebook, Twitter and LinkedIn areinventions from these conceptual-type thinkers. They saw an oppor-tunity and thought to themselves,How can I make something hap-pen? How can I take advantage ofnew technology? They often arelabeled as free thinkers by believ-ers; and, as out there by the lin-ear thinkers. The linear think-er relies on a basic step by stepapproach and sees a straight linethrough a series of tried-and-true
steps to solve a problem. The concep-tual thinker works a more complexprocess to reach a goal. Successfullinear thinkers have achieved successby lineal thinking; they know whathas worked, made them successful,and ask themselves, why change?You cant blame themit worked.
Conceptual thinkers bring newideas, they tend to think outside thebox and can come up with alterna-tive ideas that are labeled as great orpossibly dumb.
WHO IS RIGHT?Lineal thinkers are more predictable;they focus on that lineal path, andonly deviate from that path whenforced by circumstances. They tendto be more dogmatic and want tofollow that proven historical path.
In our industry, we have bothtypes of thinkers and they tendto gravitate to a particular side ofour industry. Most contractors arelinear-style thinkers, simply by thenature that they are driven to thatmode of thinking in order to suc-ceed. They bid work and to makemoney they need to be more efficientthan the competition.
They push for lower costs, push theirworkers harder and cut waste to a min-imum. This linear thinkingcoupled
with hard workfunctions quite wellfor contracting. Conceptual thinkersgenerally gravitate toward manufactur-ing or consulting, and some move intomarketing. They tend to create newproducts that solve old problems. Theysee the opportunity to capitalize on asituation, trend or change in law andconceptually come up with an idea.They think in terms of market share,embrace change and often have anequal amount of failures and successes.The contractor cant afford failuresitis not an option. But the successes ofconceptual thinkers re-shape the world;linear thinkers may learn to adapt to itand make it work for them.
Lineal thinkers are not very inter-ested in change and most find it dif-ficult to even sit long enough to listento the conceptual thinkers concepts.Conceptual thinkers tend to look forchange, sometimes even when changeis not needed. Lineal thinkers avoidtaking a risk: the path is clear, the planbasic and the road to success is hardwork, and staying on that course fol-lowing what others have done beforethem. They will just be better at it.
WHICH AM I?Are you trying to figure out whichone you are? Most of us are a bitof both; we all tend to be broughtup with a leaning toward one direc-tion or the other. Both are valuableassets. The trick is to recognize andrespect the traits in each.
As the experts predict, the nextgeneration will be more conceptualin their thinking process. They willwant to know the ultimate goal andbe allowed freedom in reaching thatgoal in their own individual way. Suc-cessful organizations will recognizeconceptual and linear thinkers fortheir value and will prosper or failaccordingly depending on how wellthey manage each.W&C
-
Change happens. It may be slow and at a glacial pace but
it happens. There are reasons why change occurs and why
it is so difficult and slow to happen. Change occurs in two
ways: It is either forced upon us or we initiate change.
iI Want to
Change,I Really Do
BY MARK FOWLER
7/28/2019 Wall Ceiling
8/45
Fiber GlassBatt
Blow-InInsulationSystem
HybridSystem
Open & ClosedCell Foam
Installing confidence
into every great build
Put assurance behind every wall, with CertainTeed on your side. Were
the only source of a truly comprehensive insulation offering. No matter
what building challenge you face, you can Be Certain youll alwayshave the right solution for maximum comfort and efficiency which
really is at the center of every insulation project.
Learn how CertainTeed can help you install with confidence.
www.CertainTeed.com/Insulation
CertainTeed Insulation
Reinforcing Success Engineering Performance Building Responsibly Providing Comfort Supporting Results
No one matches CertainTeedsbreadth of insulation options
7/28/2019 Wall Ceiling
9/458 | Walls & Ceilings | May 2013
The Voice of the Industry Since 1938
For subscription information or service, please contact Customer Service at:
Tel. (847) 763 -9534 or Fa x (847) 763 -9538 or e- mail WAC @hall data.c om
2401 W. Big Beaver Rd., Suite 700, Troy, MI 48084
(248) 362-3700 Fax: (248) 362-0317 www.wconline.com
Group Publisher Jill Bloom: (248) 244-6253, [email protected]
EDITORIAL
Editorial Director Mark Fowler:[email protected]
Editor John Wyatt: (248) 205-6659, [email protected]
Associate Editor Casey Nesterowich:(248) 244-6471, [email protected]
Art Director James P. Hohner Jr.:[email protected]
Contributing Editors:Peter Battisti, Chris Dixon, Michael Gardner, William Rogers, Cecilia Padilla and Albert Carrillo
ADVERTISING & SALES
National Sales Manager Amy Tuttle: (517) 589-8617, (800) 533-5653, [email protected]
Western Regional Sales Manager Cecilia Osmolski:(424) 241-8271, [email protected]
Classified Advertising Manager Karen McConnell: (248) 979-8137, [email protected].
AEC Bookstore Manager Katie Zarrilli: (248) 244-1275, [email protected]
Reprints Jill DeVries: (248) 244-1726, [email protected]
Single-copy Sales Ann Kalb: (248) 244-6499, [email protected]
PRODUCTION
Production Manager Jennifer Nagel: (248) 619-6471, [email protected]
EDITORIAL ADVISORY BOARD
Bob Drury NWCB
Michael Kwart Executive Director, ICAA
Michael Gardner Executive Director, Gypsum Association
Steve Pedracine Executive Director, Minnesota Lath & Plaster Bureau
Jon Mooney President, Acoustics by J.W. Mooney
Elizabeth Steiner Executive Director, ICFA
Clint Valleau - Director of Purchasing & Replenishment, Allied Building Products
AUDIENCE DEVELOPMENT
Christina Roth Audience Development Specialist
Maggie Lee Multimedia Specialist
Anna C. Silvestri Audience Audit Specialist
LIST RENTAL
Sr. Account Manager Kevin Collopy:
(402) 836-6265, (800) 223-2194, ext. 684, [email protected]
Senior Account Manager Michael Costantino: (402) 836-6266, [email protected]
Single Copy Sales
Ann Kalb (248) 244-6499, Fax: 248-244-2925, [email protected]
BNP Custom Media Group
Christopher Wilson (248) 244-8264, [email protected]
WALLS & CEILINGS (ISSN 0043-0161) is published 12 times annually, monthly, by BNP Media II, L.L.C., 2401 W. Big Beaver
Rd., Suite 700, Troy, MI 48084-3333. Telephone: (248) 362-3700, Fax: (248) 362-0317. No charge for subscriptions to
qualified individuals. Annual rate for subscriptions to nonqualified individuals in the U.S.A.: $119.00 USD. Annual rate for
subscriptions to nonqualified individuals in Canada: $157.00 USD (includes GST & postage); all other countries: $174.00 (intl
mail) payable in U.S. funds. Printed in the U.S.A. Copyright 2013, by BNP Media II, L.L.C. All rights reserved. The contents of this publication may not be
reproduced in whole or in part without the consent of the publisher. The publisher is not responsible for product claims and representations. Periodi-
cals Postage Paid at Troy, MI and at additional mailing offices. POSTMASTER: Send address changes to: WALLS & CEILINGS, P.O. Box 2144, Skokie, IL
60076. Canada Post: Publications Mail Agreement #40612608. GST account: 131263923. Send returns (Canada) to Pitney Bowes, P.O. Box 25542,
London, ON, N6C 6B2. Change of address: Send old address label along with new address to WALLS & CEILINGS, P.O. Box 2144, Skokie, IL 60076. For
single copies or back issues: contact Ann Kalb at (248) 244-6499 or [email protected].
w w w . p l a s t i c o m p o n e n t s . c o m800.327.7077
...Painting,Rust, Labor
Fuhgeddabou
dit
Since 1969
STONE
VENEERPlastic ComponentsGRAY or TAN
foundation sill screeds and casing beads
for stone veneer installations eliminate
painting and look great! Get a rustproof
job that saves time and money.
LISTED
2013PlasticComponents,
Inc.
COLORTRIMS
FOR
GRAY or TAN
7/28/2019 Wall Ceiling
10/45
AquaSol
Enhanced DPR Acrylic Finish
Cleaner. Cooler. Greener.VA
LUE
GREEN
DURABL
ERELIABLE
www.parex.com
A REVOLUTIONARY ACRYLIC FINISH
UNLIKE ANYTHING IN THE INDUSTRY.
Hydrophobic - cleaner surfaces
Heat reflective - cooler walls
Photocatalytic - pollution reducing
SCAN TO
VIEW VIDEO
7/28/2019 Wall Ceiling
11/4510 | Walls & Ceilings | May 2013
TRADENEWSCALENDAR
JOHNS MANVILLE PUBLISHESSUSTAINABILITY REPORT
Johns Manville announced the publica-tion of its 2012 Sustainability Report,We Build Environments. The pub-lication can be viewed in two formats(PDF and e-zine) on the companyswebsite at www.jm.com/sustainability.
Our culture of sustainability is agreat source of pride for the companyand our employees, and were pleasedto share our progress with our stake-holders, said Mary Rhinehart, JMpresident and CEO. We intend to cap-italize on our commitment to sustain-ability to ensure that we are better pre-pared to meet both the opportunities
and challenges of our dynamic world,and that we continue to deliver safeproducts that delight our customers.
The report, which received an Appli-cation Level Check by the GlobalReporting Initiative, presents the com-panys approach to sustainability andits progress towards achieving its long-term sustainability goals. In additionto information and case studies associ-ated with energy efficiency, reducingthe energy and carbon intensity of itsoperations, reducing solid waste andincreasing use of recycled materials inseveral areas of its business, the reportalso highlights the companys socialresponsibility in the areas of safety,employee practices and communityinvestment. This years report includes18 fully reported performance indica-tors applying the GRI 3.1 guidelines.
JUNE
SCWCPA
12-15, New Orleans
www.scwcpa.org
AIA
20-22, Denver
www.aia.org/conferences
JULY
FWCCA
11-14, ChampionsGate, Fla.
www.fwcca.com
SEPTEMBER
CONSTRUCT
24-27
Nashville
www.constructshow.com
CALENDAR
TRADENEWS
7/28/2019 Wall Ceiling
12/4511May 2013 | www.wconline.com |
CLARKDIETRICH PARTNERSWITH ON CENTEROn Center Software has announceda new partnership with ClarkDietrichBuilding Systems. Through this stra-tegic partnership, ClarkDietrichs steelframing construction products arenow available for immediate access by
contractors with the On Center Soft-ware Quick Bid estimating software.
As [a] manufacturer of inte-rior steel framing products, we gothrough an exhaustive selection pro-cess to identify leaders that share ourcommitment to delivering the highestvalue to our customers, said Clark-
Dietrichs Chief Information OfficerJim Collins. On Center Softwarecomplements ClarkDietrichs steelconstruction products perfectly byhelping our customers win more proj-ects and allowing them to more effec-tively manage bid estimating, materialflow, budgets and schedules.
GOLTERMAN & SABO DOUBLES SIZE OF FACILITYSt. Louis-based Golterman & Sabo has doubled its facil-ity size, converting an adjacent building into additionalmanufacturing, warehousing and office space. The addi-tional space will enable the company to expand adminis-trative and manufacturing operations for the companysgrowing suite of services and products. The new building
will provide an additional 70,000 square feet and houseseveral of the suppliers subsidiary companies, includingits acoustical related businesses, G & S Acoustics andFabric Wall. AR Nelson, which offers products for thehealthcare industry, will also occupy the new building.
In addition to manufacturing space, the new build-ing will feature offices, conference space, a lunch room
and a gymnasium.The warehouse spacefeatures a state-of-the art HVAC systemand has been painteda bright white andretrofitted with new
lighting to enhanceemployee comfort.Founded in 1946,
Golterman & Sabocurrently employs 73people and plans to increase its work force by five per-cent next year.
7/28/2019 Wall Ceiling
13/4512 | Walls & Ceilings | May 2013
TRADENEWS
ARMSTRONG ANNOUNCES NEWPARTNERS FOR GRID SYSTEMArmstrong Ceilings has announcedthat it has teamed with two additionalcompanies in LED lightingJLC Techand ROAL Electronicsthat manu-facture components compatible withthe DC FlexZone Grid System. Thegrid is an Emerge Alliance registered,ANSI-UL certified ceiling suspensionsystem that has the ability to distributesafe, low voltage direct current powerto lighting fixtures, sensors, and otherelectrical devices in the ceiling.
Armstrong Ceilings and its part-ners are members of the EMerge Alli-ance, an industry association thatpromotes the adoption of safe dcpower distribution standards and usethroughout commercial buildings.
ABP COMPLETES ACQUISITION OFASSETS OF ELDERSBURGAllied Building Products Corp.,a division of Oldcastle Inc., hasannounced that it has completed the
acquisition of the assets of Elders-burg Building Supply Co. (Elders-burg), a privately held gypsum wall-board and related accessories dis-tributor based in Baltimore.
Founded in 1969, Eldersburg cur-rently services the Baltimore, Wash-
ington D.C. and Hagerstown, Md.,metropolitan and surrounding areaswith four locations.
The E l de r s bur g Team i sextremely pleased to be joining theAllied team, Irrgang said. Wehave long respected Allied as a com-petitor. As part of the Allied family,we look forward to servicing ourcustomers from our expanded dis-tribution platform.
DESIGNING SPACES AND USG HELPFAMILY REBUILDUSG Corp. announced a partner-ship with Designing Spaces airingon Lifetime cable network. Themanufacturer provided its supportby donating building materials andemployee labor to makeover the
Grabber Construction Products has appointed
Robert F. Rugg to its board of directors as an
outside director.
Master Wall has named Brian Conroy as its
northeast sales manager.
PEOPLE
Rugg Conroy
7/28/2019 Wall Ceiling
14/4513May 2013 | www.wconline.com |
home of a grandmother in NorthLauderdale, Fla. The DesigningSpaces episode aired on LifetimeApril 4 at 7:30 a.m. ET.
Designing Spaces teamed up withRebuilding Together, an organiza-tion that provides critical repairs tolow-income homes, and identified theneed to help Joy Stewart and her fam-ily. Stewart received the home make-over just in time for Valentines Day.
USG building materials providedto the home include Sheetrock BrandUltraLight Panels, Durock cementboard Next Gen, UltraLightweightAll Purpose Joint Compound, MoldTough Gypsum Panels and Light-weight All Purpose Joint Compoundwith Dust Control.
FLEX-ABILITY CONCEPTSANNOUNCES BLOG CONTEST
Oklahoma-based Flex-Ability Con-cepts has announced a competitionfor its end users. The company isasking its customers for a blog postdescribing a story they have hadworking with the their products.Whether a humorous, interesting,unique, bizarre or focused account,the company wants to hear from itscustomers in writing.
The company has created a blog atwww.flexabilityconcepts.wordpress.com. The winner will have theirentry posted on the company blogthis fall and have their post pub-lished in Walls & Ceilings magazine.The winners will also receive a $100gift card good at a number of restau-rants, including Red Lobster, OliveGarden and Longhorn Steak House.
For more information on thiscompetition visit the company web-site at www.flexabilityconcepts.comor contact Robert Widmer at [email protected]. Thewinner will be announced in a fallissue ofW&C.W&C
SPACKLE BY DAVE COVERLY
7/28/2019 Wall Ceiling
15/4514 | Walls & Ceilings | May 2013
product
FOCUS onproduct
FOCUS on
Restoration millworkJ-pocket with cut-outCERTAINTEED
Restoration Millwork J-Pocket with
Cut-out allows the cellular PVC
trimboard to lie flush with siding
around windows and doors with
built-in nail flanges, allowing for more
perfect miter cuts at the corners.
Available in a 4-inch width with either
Smooth or TrueTexture woodgrain,
both with FinishedEdge, a smooth
finish created by a proprietary heat-
sealing process that prevents dirt
from collecting on the surface. Backed
by a 25-year limited warranty, it is
paintable, low-maintenance, resistant
to UV rays, rotting, warping, moisture
and insects, can be cut using ordinary
woodworking tools and fastened with
nails or screws.
Trim system for ceilingsPLASTIC COMPONENTS
The new RADii trims offer the simple and efficient
way to finish a suspended ceiling which terminates
at a curved wall or surface. Perfect for outside and
inside radius treatmentsincluding compound or
S-shapesthese trims eliminate expensive add-
ons like extruded metal column rings, radius reveal
moldings and wall angles.
Non-rusting PVC
Minimum radius: 15, 24, 30 and 54 inch
Vinyl J-trimPHILLIPS MANUFACTURING
gripSTIK Vinyl J-Trim provides a finished edge at
door and window openings along with other various
wallboard intersections. This durable and impact
resistant trim was designed with ease of installation.
The product does not require any joint compound
and can be nailed or slipped on. The trim is available
in 1/4-, 3/8-, 1/2, 5/8- and 3/4-inch sizes. This is just
one of the products in the companys vinyl beads
and trims line.
Recycled cornice and crown moldingsARCHITECTURAL PRODUCTS BY OUTWATER LLC
The company offers economically priced, 100
percent recycled, environmentally friendly
cornice and crown moldings that have been
specifically designed for use with indirect lighting.
Manufactured to easily accept a variety of cove
molding light fixtures without causing scalloped
or uneven light dispersion and illumination, the
companys cornice and crown moldings for
indirect lighting can also be used just as readily
as a traditional cornice or crown molding without
lighting if desired.
Full trim lineFLANNERY INC.
The company offers a full line of Fiber Cement Panel Trims for James Hardie,
CertainTeed and Nichiha exterior wall panel systems. Those trims include a Vertical
Screed (CPS 375-50), which creates a vertical reveal between each panel. The
Horizontal Z-Flash (CPZ 50) creates a horizontal reveal while covering the top edge of
each panel. Outside Corner (CPX 375-375) and Inside Corner (CPW 50-50) Trims are
also available. Visit the companys Web site for more details.
Trims and Moldings
7/28/2019 Wall Ceiling
16/45
SPEC MIX FIBER BASE COAT (FBC) Stucco provides major advantages to the project owner, designers
and contractors. The product is engineered, tested and all constituents are computer batched and
preblended to eliminate inconsistencies common with field mixed stucco. Formulated for both one-coat
and scratch & brown applications, SPEC MIX FBC Stucco is a cost effective, ICC/ESR approved product
that consistently delivers long-term durability.
SPEC MIX stucco products are
available in 80 lb. and 3,000 lb.
recyclable bags with several
silo delivery systems available
to meet the requirements of
any size job.
2013 SPEC MIX INC.
Video Vault Demos, MY-SPEC
specification writer, product
downloads and yield/coverage tables, LEED information
and more for SPEC MIX products. WWW.SPECMIX.COM
NEW WEBSITE TOOLS:
U.S.A.
7/28/2019 Wall Ceiling
17/4516 | Walls & Ceilings | May 2013
Far away from the hustle andbustle of a big city, Silver CreekResort in Snowshoe, W. Va., has got-ten a new lease on life. The nine-sto-ry high rise building, with 239 con-dominiums, has recently undergonea complete renovation, and this timethey are doing it right, accordingto Sam Collins, who is the generalmanager and acting project manager,as well as being a resident for sixyears at Silver Creek.
Our original cladding was apanelized EIFS and weve had waterleaks since the beginning in 1985but thats because it wasnt installedor maintained correctly, said Col-lins. This time we worked with anarchitect and looked at metal panels,
fiber cement and other claddings,
and selected a 5-inch drainable Sto-Therm Lotusan NExT (EIFS) fromSto Corp. because it was the best fitfor our needs and the best R-value.A 5-inch drainable EIFS providesan approximate R-19 of continuousinsulation, also referred to as CI.
The NExT system includes Sto-Guard, a fluid-applied waterproofingair barrier, and StoLit Lotusan, a fin-ish with a pronounced self-cleaningeffect, and five inches of continuousinsulation. These three componentscreate a high-performing, eye-catch-ing wall cladding system that saves
energy and stays attractive for years.
This Sto reStore project consisted of125,000 square feet of the companyswall cladding.
Snowshoes weather and climatemake for the best snow in the South-east. It also results in some of the mostextreme wind, snow and rain in theSoutheast and prior to the renova-tion, every time a severe storm camethrough Silver Creek, management hadto deal with damaged carpets, replacedrywall, fix popcorn ceilings, and con-tinue to band aid the problem.
Each time we had a storm withany wind-driven rain, we had any-
where from moderate to severe dam-
Resort residents find EIFS retrofit makes difference in
durability and energy efficiency.By Gabriel Castillo
PILLAR OF THE
COMMUN
7/28/2019 Wall Ceiling
18/4517May 2013 | www.wconline.com |
ages that our maintenance depart-ment had to work numerous hoursto repair, costing us anywhere from$5,000 to $20,000 in repairs eachyear, says Collins.
According to Collins, at the timethe original EIFS was installed therewas no option for substrate protec-tion, air barriers or drainable sys-tems, but that has changed greatlyover the years. Bill Perry, senior proj-ect manager of Pillar Construction,says the key to any cladding projectis to know what you are doing. Thetechnology has vastly improved in 20years, and with the latest and greatestin air barriers and finishes, this wasthe perfect solution for Silver Creek.
Before starting the project, sec-
tions of the building had to be
opened up to identify the existingcondition behind the wall. All of theissues had to be identifiedthe waythe EIFS panels were hung on thebuilding, the window leakage issues,and the imperfect seals - so thatthey could create a solid, water-tight
building in the new cladding.The team, which included Pil-lar Construction Inc. as the generalcontractor, Keast and Hood Co. asprime consultant and structural engi-neer, Williamson & Associates asbuilding envelope consultants, andPeter Fillat Architects, along withSto, all worked together from thebeginning to create a durable, water-tight, and energy efficient building.
We had to remove all of the orig-inal exterior skin including the EIFS,exterior sheathing and wet wall cavi-ty insulation before we could begin,says Perry. The trend now is toinsulate outbound of the exteriorsheathing taking the insulation outof the cavity, and we did just that.
THE BEGINNINGSam Collins and members of theboard of directors at Silver CreekResort knew they had to do some-thing. Their building was leaking, andhad been for more than 25 years, andthe damage to the building was justgoing to escalate. After looking at upto 10 different cladding options, theydecided on using EIFS. They foundtwo companies on the East Coast andinvited them to meet with them.
Pillar Construction was impres-sive and we liked the work theyvedone, says Collins.
According to Perry, they showedthem vivid illustrations of what thebuilding would look like, and whenchosen, they got involved with budget-ing and selection of the system fromthe beginning. After the initial draw-ings, they worked with architect, PeterFillat, who came up with the plans.
We created drawings and workedclosely with Williamson and Associ-ates, says Fillat. It was a big joband a gigantic, interesting building.Nobody wanted to change the archi-tectural faadeits strongandthey wanted to keep it simple.
According to Perry, the options Pil-lar provided, and the solution that theentire team presented, gave the board
clarity and a better understanding of
Pillar Construction is a full service spe-
cialty contractor doing business for
more than 15 years in various markets
in the U.S. Established in the Washing-
ton D.C. area, the company currently
serves the east coast and the south-
west regions from its regional offices.
The companys arch it ec ts, engi -
neers, construction professionals and
applicators combined experience qual-
ify the contractor to deliver top-notch
quality. In addition to ABAA, AWCI and
other certifications, the experience in
rainscreen faade systems, air and
moisture barriers, insulation, exterior
sheathing and framing, and sealants
makes Pillar a seasoned building skin
contractor. The company and its staff
understands and manages all the com-
ponents of the building envelope for a
seamless application with a more con-
trolled installation and better sequenc-
ing of all the pieces.
After completing Silver Creek, Pillar
Constructions restoration team that
included Goran Kukic, Elmer Castro
and Fredis Guerrero under the supervi-
sion of Bill Perry, have moved on to
work on another building skin restora-
tion project.
PILLAR CONSTRUCTION
ITY
(From top to bot-
tom, lef t to right):
Maher Chalabi,
Gabriel Castillo,
David Shomette,
Goran Kukic,
Bill Perry and
Raja Khoury.
PhotobyDanCunningham,
ArchitecturalPhotographerofArlington,
Va.
7/28/2019 Wall Ceiling
19/4518 | Walls & Ceilings | May 2013
what they had and how to solve theproblems to create something very spe-cial. One of the key selling points wasthe air and moisture barrier, which isnow code in most states, says Perry.
Adding a continuous air and mois-ture barrier was crucial, and gavethe building a much truer R-value.The air barrier connected to thewindows to give it a tight seal.
All 740 windows needed to bereplaced. The new windows, whichwere Wojan M950 Series thermalbreak horizontal sliding and fixedwindow assemblies, were also alarge factor in the energy savings.
The previous installation wasrequired to have expansion jointsbetween each panel, but becausewe removed everything down tothe studs we were able to eliminatethe panel to panel joints in the sub-strate, says Brock Osborn, Stosbusiness development manager ofrestoration. This allows the air bar-rier to run continuously between thepanels and allows for less opportuni-ty for water and moisture to get in.
CHALLENGESThe project was done in two phasesover more than two years. The build-ing was occupied during the entiretransition, with full-time residentsand vacationers. This is a large prop-erty and getting all the ownershiptogether to begin the renovation wasthe first challenge, according to Perry.
The next challenge was the climate.Silver Creek is located on the SkiSlopes and sits at 4,200 feet above sealevel and the annual average snow fallis 180 inches. The decision to reno-vate was made in early 2011, howev-er, because of the snowy winters, theyneeded to wait until summer to get
started. The first snow falls in Octo-
ber and can stay as late as April. Soto keep it dry, they first wrapped thebuilding, and then sealed it to keepit enclosed for four to five months ofhard weather. Through this time, thebuilding stayed occupied.
The final challenge was the location.A beautiful and remote resort loca-tion, even the closest Home Depot,according to Perry, was three hoursaway. There is also limited use of cellphones, because of its proximity to theNational Radio Astronomy located innearby Greenbank, W. Va. The crew,which was up to 60 people at any onetime, committed two to three monthsat a time, and stayed on the property.
We made site visits to the remotebuilding location on almost a weeklybasis, says Craig Swift of Keast andHood, the structural engineeringfirm on the project whose main rolewas repairing the metal stud back-ing. Much of the metal stud claddingwall system had been significantlycorroded and deteriorated, thoughthe primary structural system wasin fairly good shape. The key struc-tural challenge was to design repairsand replacement of the metal studwalls without requiring removal ofinterior finishes or access from theinterior. Ultimately, a team effortfrom all parties overcame the chal-lenges to get to a great end result.
TESTING: ONE, TWO, THREEAccording to Fillat, there were sever-al water tests and inspections alongthe way, including after the windowswere installed.
Scott Johnson, an inspector withWilliamson & Associates, cameout during phase one with windowwater testing and came back duringphase two to test the windows and
claddings related to the openings.
7/28/2019 Wall Ceiling
20/45
Enter our 15th Anniversary Sweepstakes and win free live Maine lobsters!
W W W . H U N T E R P A N E L S . C O M / 8 8 8 - 7 4 6 - 1 1 1 4
No purchase necessary. Certain restrictions apply. Employees o Carlisle Construction Materials (CCM), Hunter Panels and/or their amilymembers are not eligible. Contest begins 1/1/2013 and ends 12/31/2013. See www.hunterpanels.com or ofcial rules and entry orm. Void whereprohibited by law. Batteries not included. Itching and rash may develop i you are allergic to the ridiculously amazing taste o lobster. Bummer.
Hunter Panels is celebrating 15 years o making the leading energy efcient Polyiso insulation panels
by giving away a shipment o live Maine lobsters to 15 lucky winners each month during 2013. Simply
visit www.hpanels.com to enter our exciting sweepstakes. Enter as oten as you want, and who knows,
you could soon fnd some o Maines most tasteul residents on your doorstep.
A N N I V E R S A R YENERG
YSMART
FROMTH
ESTART
7/28/2019 Wall Ceiling
21/4520 | Walls & Ceilings | May 2013
The building tested out fine,says Johnson. There was a majorstorm during the final phase of
construction, with 85 mph windsand hard rain, and there were noleaks. We attribute this to the
EIFS and windows, and of course,the installation.
Johnson and his team performedthe ASTM E1105, a uniformed staticpressure test to evaluate water infil-tration performance, capabilities ofwindows and related construction onthe building. Testing was performed atthe most stringent requirements. Theytested each assembly for 15 minutes.
The end result is a beautiful, drybuilding, changed from white toearth tones. The new main creamcolor, with a separate forest greencolor inset, gives the building a dis-tinct profile and more depth, accord-ing to Fillat. This is the first time Fil-lat had ever worked with a drainableEIFS cladding and he feels its a greatsolution to a long-standing problem.
An interesting addition to theresort is that it now has the logo andsignage built into the building, whichthey have never had before. On theend of one of the wings of the build-ing are two foot high letters statingSilver Creek Lodge, and on the frontof the building Silver Creeks logo isadded, which includes the name anda skier with swoops being cut intothe building. The front logo lettersare up to 8 feet tall.
And not only does it look good,people are noticing drastic changes intheir utility billswith a savings nowof 20 to 50 percent, says Collins.Its quieter, too. Being a ski resortthe noise reduction from the outsidehas been a big improvement since inthe winter time you have ski guns andgrooming machines running all of thetime. And another benefit is that frominside my residence I can no longerhear the wind blowing or have snowin my living room each morning whenI wake up.W&C
Gabriel Castillo is business
development manager of
Pillar Construction.
The leader in high-performance drywall corner solutions.
If metal is so strong, whydo they use composite forthe bumpers?
Distributed by
www.grabberman.com
Because the issue is nothow strong it is, its howwell it stands up toimpacts. Metal bead dents andtwists. Plastic bead cracks. NO-COAT
is resilient. Its paper-plastic-paper
composite holds up to severe impacts
and wont dent, crack or rust. But
dont take our word for it, go to
www.no-coat.com to see for
yourself and request
a free sample ring
or contact us at
1-888-662-6281.
PILLAR OF THE
COMMUNITY
Staff at Pillar Construction.Pillar Construction Senior Project
Manager Bill Perry.
The staf f of Pillar Construction.
7/28/2019 Wall Ceiling
22/45
7/28/2019 Wall Ceiling
23/4522 | Walls & Ceilings | May 2013
S
easide, Fla., is located along thestates Panhandle Coast midway
between Ft. Walton Beach and Pan-ama City. The community is oftenreferred to as an example of newurbanism, a design movement that pro-motes walkable neighborhoods, easierpedestrian accessibility and greaterintegration of public transportation.
Composed of different housingstyles, boutiques, services, restau-rants and offering cultural eventsthroughout the year, the area hasmade a significant impact on urbanplanning and offers homeowners a
unique residential experience.
CHALLENGING WEATHER EXTREMESGiven the geography, structures inSeaside are often subject to weath-er extremeshigh humidity, heavydownpours, and tropical, wind-driven rain spawned from the Gulfof Mexico.
A new three-story res idencefacing the Gulf, as well as Sea-
sides main thoroughfare proves
no exception. The Arkon Group,the site contractor, had seen whattrapped moisture could do tohomes constructed in the area overthe past 20 years.
So that the bui lding wouldreceive maximum protection andremain problem-free, Arkon want-ed a system that was superior in
quality to traditional house wraps
Air barrier membrane protects a Florida residence from
the ravages of wind-driven rain and guards against theharmful effects of moisture and air infiltration.
A TOUGHBARRIER
7/28/2019 Wall Ceiling
24/4523May 2013 | www.wconline.com |
or felt, that was easy to install and
would adhere tightly to preparedconstruction substrates. While theresidences first floor was placedusing CMU, the second and thirdf loor exter ior wal ls were con-structed with plywood sheathing.Both of these material surfacesrequired durable moisture protec-tion and strict air leakage controlto ensure the long-term durabilityof the building.
AMAZING GRACETo restrict moisture from infil-trating the walls of the residencesupper stories, the Arkon Groupconvinced the project architectand residence owner to choose avapor permeable air barrier mem-brane made up of a breathablecarrier film backed with a special-ly formulated adhesive. Designedfor use with different types of sub-strates, Perm-A-Barrier VPS per-mits water vapor, which normallywould be trapped inside the ply-wood sheathing walls, to escapeallowing them to remain dry. Itresists hydrostatic water pressureand keeps homes dry even whendownpours and stormy, wind driv-en conditions invade.
As the product is fully-adhered, itcan better protect the home againstwater and air leakage when com-pared to building wrap or felt paper.It also held up very well after beingexposed to UV rays for the fivemonths of construction.
The product eliminates the needfor mechanical fasteners too, sooverall, installation was easier andrelatively problem-free. To protectthe CMUs at the ground level sec-tion of the home, Arkon installedPerm-A-Barrier VP, a fluid-appliedmembrane that creates a solid barri-er against air infiltration and energyloss, minimizing the walls conden-sation problems.
Arkon also installed aluminumflashing to seal detail areas and pro-vide a continuous barrier against air
and moisture penetration.W&C
Grace Perm-A-Barrier VPS protects this Sea-
side, Fla., residence from the ravages of wind-
driven rain and guards against the harmful
effects of moisture and air infiltration.
7/28/2019 Wall Ceiling
25/4524 | Walls & Ceilings | May 2013
These mandates will change theway construction professionals thinkabout energy-efficient construction,specifically requiring specifiers toconsider strategies to minimize ener-gy consumption.
THE PROBLEMExterior walls are most commonlybuilt using stud framing with someform of cavity insulation located
between the studs. This method
separates the insulation into non-continuous pockets and allows ener-gy to transfer between the interiorand exterior of the buildinga phe-nomenon known as thermal bridg-ingwhich significantly reducesthe energy efficiency of the wall.
Traditional cavity-insulated wallsalso suffer from air leakage, whichoccurs at joints, gaps and penetra-tions. The resulting airflow into or
out of the building affects energy
efficiency, indoor air quality, andheating, ventilating and air condi-tioning (HVAC) costs. Further, cav-ity insulation gets dirty and canabsorb and retain moisture, whichcan lead to the premature degrada-tion of the studs, sheathing and dry-wall exposed to the cavity.
R-Value is a number used toexpress a materials thermal efficien-cy and the higher the number, thebetter. However, this can be mis-leading because it only takes intoaccount the insulating value of thematerial itself, and not the full wallassembly. As described earlier, atypical framed wall can be compro-mised due to thermal bridging andair leakagewhich can decreasethe R-value of the overall wall by asmuch as 50 percent or more in steel-framed walls and 24 percent or more
in wood framing.
ImagecourtesyofDryvit
UP-TO-CODE
PERFORMANCE
Energy-related changes are coming for new commercial
buildings. Is the wall and ceiling industry ready?
By Bob Dazel, AIA, LEED Green Associate
Changes are fast approaching for the building industry. TheU.S. Department of Energy (DOE) claims that buildingsaccount for 39 percent of total energy use and 38 percent of total
carbon dioxide emissions in America. The desire to reduce both
is leading to tighter government regulations on new construction,
requiring states to adopt up-to-date energy-related building codes
that will improve the performance of new commercial buildings.
7/28/2019 Wall Ceiling
26/4525May 2013 | www.wconline.com |
Adding thicker cavity insulationdoes little when trying to improvethe thermal efficiency of the wallbecause it does not mitigate thermalbridging or air leakage.
THE CHANGEIn an effort to combat the increas-ing demands on energy, the DOE hasmandated that by October 18, 2013,all states must adopt a commercialbuilding energy code that meets orexceeds ASHRAE Standard 90.1-2010. The updated standard will trig-ger a substantial change to the designof wall assemblies. ASHRAE 90.1-2010, which has been adopted by thenew 2012 International Energy Con-servation Code, increases the require-ment for continuous insulation formost commercial wall assemblies innearly all climate zones.
Typically revised every three years,the IECC is part of the InternationalBuilding Code and is the governingcommercial code section for build-ing design and material requirementsrelated to energy efficiency. It dividesthe U.S. into eight climate zones,each with specific requirements forthe type, placement and amount ofinsulating materialsboth cavityand continuousin the wall assem-bly. Several versions of the IECC arecurrently in effect across the coun-try, making it vital for architects andother construction professionals to beaware of which version is adopted bythe state or local jurisdiction in whichtheir project is located.
Each latest version of ASHRAE90.1 and IECC adoption have
increased the amount of continuous
insulation required in commercialbuildings, and the current standard(2010) prescribes the use of continu-ous insulation in nearly 90 percent ofthe U.S. There is no doubt that futurecodes will be even more stringentwhen pertaining to energy efficiency.
The latest of these is ASHRAEStandard 189.1: Standard forthe Design of High PerformanceGreen Buildings. This standardsrequirement for continuous insula-tion exceeds the 90.1 Standard byincreasing the requirement for CIto all climate zones and in greaterthicknesses than previously required.
THE SOLUTIONExterior continuous insulation andan air- and water-resistive barrierare the most effective way to meetthe new code requirements by elimi-nating thermal bridging and air leak-age issues associated with traditionalstud framing and cavity insulation.Placed on the exterior of a build-ing structure, continuous insula-tion eliminates the thermal bridgingeffect caused by stud framing andcan translate into a 20 to 30 percentreduction in annual energy costs.
EIFS is not a new or unproventechnology; the system was intro-duced more than 40 years ago to theU.S. construction market and is inplace today on more than a millionstructures. Engineered to integratethe use of an air barrier and con-tinuous insulation, todays EIFS pro-vide a design-flexible, cost-effective,code-compliant single-source solu-tion to todays demand for energy-
efficient, high-performing walls.
EIFS meet the need for continu-ous insulation and offer uniquedesign flexibility due to the abilityto shape that insulation easily into3D designs. Diverse finish optionsare available to achieve a varietyof architectural styles. In addition,one of the most attractive propertiesof EIFS is their light weight. Thesecombine to make EIFS a superiorchoice when compared to other clad-dings. For example, Dryvits Out-sulation systems weigh just 1 to 2pounds per square foot, comparedto the average clay brick weight of40 to 50 pounds per square foot.This translates into a reduction ofbuilding structure cost, materialtransportation and a shortened con-struction cycle. Outsulation providesintegrated continuous insulation, anair/water-resistive barrier and singlesource wall assembly warranty, all ofwhich traditional brick does not.
As October 18, 2013, grows clos-er, the building industry will experi-ence increased awareness of EIFS asa solution to continuous insulation,thermal bridging and therefore, codecompliancy. The trend toward ener-gy efficiency in the U.S. is certain toprogress, and sustainable initiativessuch as building a tighter envelopewill continue to be reinforced as pri-mary focuses in the industry.W&C
Bob Dazel, AIA, LEED Green Associate,
has been a registered architect in the
State of Ohio since 1992. With 15 years
of experience in the EIFS industry and his
background in architecture, Dazel is also
responsible for the development of all Dry-
vit AIA- and USGBC-accredited programs.
A breakdown of Dry vits Outsulation Plus MD System.
Image courtesy of Dryvit
A diagram showing how thermal bridg ing occurs.
Image courtesy of Dryvit
7/28/2019 Wall Ceiling
27/4526 | Walls & Ceilings | May 2013
The construction industry is being stretched
to evolve in a harder-than-ever market-
place and mobile technology is making
it easier by reaching wall and ceiling contractors
with construction apps.
iPads, iPhones and other smart phones should all
be considered irreplaceable resources on the job site
nowadays with the help of downloadable applications
that organize and deliver information quicker thanever. What makes them better than a laptop is their
level of portability and the range of apps available for
your use. The evolution of contractors utilizing smart
phones to their fullest potential seems to go hand-in-
hand with BIM being accepted by contractors.
Heres an introduction to some apps you should
download to lighten up your tool bag and get the
job done faster, whether youre a beginner who
just got a smar t phone or you already access
BIM data on your iPad. These options range in
price and function but your best bet is to begin
by downloading a free option, understand itsfunctionality, and then pin-point which apps will
work best for you by visiting Apples App store or
Androids Google Play websites.
If youre trying to find an edge against the competition,
a simple solution is to start using apps on your
smart phone or iPad while on the job site.
By Casey Nesterowich
Construction
APPSFORTHEMODERNDAY
CONTRACTOR
A website optimized for mobile devices is usually a sub domain of a regular website, rendering the web pages in a very
specific way dedicated to mobile devices. To distinguish a mobile website from a standard website, the difference is in
fact that its designed for the smaller handheld display and touch-screen interface. Instead of downloading a mobile
website in the app store like you would an app, as long as your smartphone has a mobile browser, you can view the spe-
cially designed website. An example of a mobile website would be ClarkDietrich's itools.clarkdietrich.com.
MOBILE WEBSITES:
7/28/2019 Wall Ceiling
28/4527May 2013 | www.wconline.com |
COMPANY NAME: USG
APP NAME:USG Solutions
PLATFORM(S): Compatible with iPhone, iPod touch, and iPad.
Requires iOS 4.0 or later.
TARGET AUDIENCE: Contractors
APP DESCRIPTION: USG Solutions includes product how-tos,
material estimators for ceiling, interior panel, tile and flooring
applications, product catalogs and contact information for
USG USA and Canada.
COMPANY NAME: Trim-Tex, Inc.
APP NAME:Trim-Tex Drywall Solutions
PLATFORM(S): iPad
TARGET AUDIENCE: Contractors, Builders,
Architects, & Homeowners
APP DESCRIPTION: Trim-Tex Drywall Solutions is your source for the latest innovations in
Trim-Tex rigid vinyl corner beads.
COMPANY NAME: ClarkDietrich Building SystemsAPP NAME:ClarkDietrich iTools
PLATFORM(S): Compatible with All Platforms
Web Based Application.
TARGET AUDIENCE: Contractors, Distributors & Architects
APP DESCRIPTION: Innovative electronic tools and solutions from
Americas largest cold-formed steel manufacturer.
COMPANY NAME: CertainTeed Gypsum
APP NAME:dBstation
PLATFORM(S): iPad 2 iOS 4.3 or later and Android Tablet
TARGET AUDIENCE: Contractors, Builders,
Architects, & Homeowners
APP DESCRIPTION: New Interactive Tool Simulates Acoustical Performance of CertainTeed
Gypsum Products in Real-World Applications. Features a catalog where residential and
commercial systems can be compared under equivalent settings, and a scenario application
to experience acoustical performance in real-life situations.
Featured IndustryFeatured Industry AppsApps
7/28/2019 Wall Ceiling
29/4528 | Walls & Ceilings | May 2013
CATEGORY APP NAME DESCRIPTION
Business ProcoreOperating System: iOSPrice: Free
This app provides a centralized project portal to trackand manage construction project information. Procoremanages construction schedules, requests-for-infor-mation, submittals, change orders, contracts, budgets,directories, documents, photos and more.
Business Radius CalculatorOperating System: iOSPrice: $1.99
Allows you to calculate the radius, central angle, arclength, and circumference of an arc segment. The built-inunit converter makes it work with any length unit you need.
Business SmartBidNetOperating System: iOSPrice: Free (this app is only for pay-ing subscribers to SmartBidNet)
This application allows the bid manager to access aprivate network of subcontractors and view them orga-nized by the services they provide to ensure bids targetqualified and licensed companies you approve.
Business The Architects FormulatorOperating System: iOS
Price: $9.99
This program contains more than 400 formulas helpfulfor the architect.
Reference ARCATOperating System: iOSPrice: Free
Has up to date building product information includinglibraries for CAD Details, BIM content and specifications.The app also has more than 11,000 listings of buildingproduct manufacturers with contact information.
Reference Drywall CalculatorOperating System: iOSPrice: $0.99
This handy iPhone/iPod Touch application assists youin easily figuring out square footage of a room. This appallows the user to calculate the walls, ceiling or a slope(triangle), or any combination of the previous you would
like to figure.
Products Sto Corp.Operating Systems: iOSPrice: Free
The Sto mobile App includes information and documen-tation for the companys systems and products, as wellas a distributor locator function.
Products Energex Wall SystemsOperating System: iOS, AndroidPrice: Free
For onsite access for contractors and installers for detailsand product data on the companys EIFS system installa-tions. Provides fast field data to answer knotty install issues.
Utilities Bosch Professional
Unit ConverterOperating System: iOS, AndroidPrice: Free
A universal unit converter, this app makes quick conver-
sions on the building site or in the workshop.
Utilities Home Builder Pro CalcsOperating System: iOSPrice: $4.99
This 5 star app contains more than 100 calculators tohelp you with a wide range of calculations on the jobsite. Foundations, framing, electrical, area volume andangle, are all available within this one app.
Estimation EagleView TechnologiesOperating System: iOS, AndroidPrice: Free
Providing on-site ordering based upon your GPS locationor through manual address entry, have easy access to andstorage of all your measurement details, and find informa-
tion quickly with the property-centric organization system.
ConstructionConstruction AppsApps
7/28/2019 Wall Ceiling
30/4529May 2013 | www.wconline.com |
CATEGORY APP NAME DESCRIPTION
Estimation iEstimate ConstructionOperating System: iOSPrice: $19.99
This app claims to be the most advanced mobile esti-mation tool in the world to provide contractors andadvanced do-it-yourselfers a powerful tool for projectand job estimation. Send estimates directly to customerswith your logo at the top, create templates for commonprojects, and manage a central database of products
and services that can be attached to individual projects.
Estimation The iQuick EstimatorOperating System: iOS, AndroidPrice: $4.99
This app allows you to choose your trade, quickly inputdifferent variables, and calculate the amounts of materi-als and costs for a job. After determining costs, you canemail your bid directly from the app to your client.
Productivity ArchiReportOperating System: iOSPrice: Free
This app is a software suite for monitoring sites on iPadand iPhone. It generates detailed reports automaticallywith photos, drawings, plans and notes.
Productivity AutoCAD WSOperating System: iOS, AndroidPrice: Free
View, edit, and share AutoCAD drawings with anyoneusing your mobile device. Work on designs without aninternet connection, and easily open DWG, DWF, andDXF files directly from email.
Productivity BIMxOperating System: iOSPrice: Free
This app, from Graphisoft, allows you to open and inter-actively explore 3-D BIM models previously createdwith ArchiCAD, the BIM software for architects.
Productivity DEWALT Mobile ProOperating System: iOS
Price: Free
This app comes with a construction and scientificcalculator, plus calculator templates for area, length,
and volume, along with estimating studs, drywall, andconcrete slabs.
Productivity iBlueprintOperating System: iOSPrice: $0.99
Create blueprints for yourself or clients and export themvia email. Save and edit multiple blue prints, input pre-cise measurements with text entry.
Productivity iHandy LevelOperating System: iOSPrice: Free
Handy Level Free turns your iPhone into a carpenter'slevel. You can hold your device either horizontally orvertically, with the edge of the device on the surface youwant to test, and it will tell you whether the surface isperfectly level or slightly sloped.
Productivity My Measures &Dimensions PROPrice: $5.99
Once you take a photo, upload it to the app and you areable to add dimensions, arrows, comments and allowsthe user to store all information electronically withouthaving to carry around paper sketches. Operating Sys-tem: iOS, Android
Projectsand Jobs
The Construction Job BoardOperating System: iOSPrice: Free
This On Center Software app for the iPhone and iPodTouch is a mobile application that allows users tobrowse construction-related jobs. This application inte-grates with jobs.oncenter.com and lets you view, applyand recommend construction-related job postings fromaround the world.
ConstructionConstruction AppsApps
7/28/2019 Wall Ceiling
31/4530 | Walls & Ceilings | May 2013
Marc Rutenberg Homes is striv-ing to create a net-zero energypath of the future. The companysmost recent projects, the Zero Ener-gy America homes, are the fruitsof this labor. In every aspect, thesehomes are designed to exceed thehighest green building standards,providing the healthier, cost-effectiveand sustainable alternative in homedesign and construction.
The first completed homes, andthose still under construction, arescattered throughout Floridaeachdiffering in personal design preferencebut maintaining the exact same valueof selecting extremely sustainable con-struction options. Ashley Rutenberg,LEED AP Homes, the Zero EnergyAmerica Homes project coordina-tor, was also the internal green build-ing consultant. She says there are twodifferent generations of design in thefour Zero Energy America homes.
The first two of the net-zero ZEA
homes were completed in September2012. ZEA 3 was completed nearthe end of 2012, while ZEA 4, theupcoming second-generation home ofZero Energy America, is expected tobe completed in May 2013.
The first generation maintainedthe Florida-Mediterranean style thatis so dominant in the local market,with stucco walls, barrel-tile roofs,and a transitional interior, Ash-ley Rutenberg says. The upcomingsecond-generation home is pushingthe envelope of the local market inFlorida with a more contemporarystyle of architecture but still main-taining a warm, organic and softpalate of materials so that it standsas a comfortable and inviting home.
The goal in the design change from
the first home to the second was tobring newer, fresh ideas, conceptsand living spaces.
INTERIOR CHOICESFrom the interior design choices ofthe low-VOC paint in the bedrooms,the ethanol burning fireplace, andthe roof pavers to the power gen-eration of the building envelope, the4,500-square-foot plus ZEA homeswere designed to incorporate everyavailable alternative to become anexample for future net-zero energyhomes down to the very last detail.In these homes specifically, we usedIcynene spray foam insulation at thetop of the attic, which allows ourHVAC equipments and ducts to be
in conditioned space and prevents
The Zero Energy America homes in Tampa, Fla.,
inspire a new way of net-zero livingwith no electric bill.
By Cristina ToscanoHOME F
7/28/2019 Wall Ceiling
32/4531May 2013 | www.wconline.com |
creating a super-heated attic, saysRutenberg. Think: Why build anoven and then try to cool it whenyou could just cool against the out-side air temperature? We used eitherHebel AAC walls, which are con-crete blocks with high thermal per-formance in and of themselves, orDow XPS insulation.
Dow played its biggest role inthe fourth ZEA home still in theworks. For the Breakwater Mod-el at Champions Club, engineershelped us to design a wall systemthat matches Aerated AutoclavedConcrete in thermal performance(R-value) but without the signifi-cantly higher material cost of AAC.We designed the wall with 2 inch-es of Dow Extruded Polystyrene(XPS) insulationwhere typically3/4 inches would have been usedand a 2-inch chase wall so that theinsulation does not have to be con-
tinually broken by all of the elec-
EE
7/28/2019 Wall Ceiling
33/4532 | Walls & Ceilings | May 2013
tric wires, plumbing lines, HVAClines, A/V wires and other MEPcomponents that go in the wal ls of ahome, says Rutenberg.
For power generation of the net-zero energy home, the Rutenbergteam used LG Solar Panels, whichhave supplied more than 100 percentof the electricity needed to powerthe homes so far. Because Ruten-berg used optimized scroll or rota-ry compressors, specially designedheat exchangers and inverter tech-nology, VRF systems from LG werealso used for the home for minimiz-ing energy use to levels unattainablethrough traditional HVAC systems.Kevin McNamara, vice president of
LG, says in the ZEA home, the LG
VRF systems had small ductworkthat increased attic storage spaceand a quiet operation, not to men-tion a cooling-load of nearly ninenominal tons.
Despite the ZEA homes empha-sis on certain sustainable aspects,such as daylighting, ventilation andbuilding insulation, dont call theydont meet the definition for Pas-sive House. A Passive House doesnot necessarily use net-zero energy,and indeed, it would be exceeding-ly difficult to make every aspectof a home passivefor example,refrigerators and other appliances,heated water, lighting for nighttimeand heating on the coldest days are
things that a 100 percent passive
home could not accommodate,says Rutenberg.
The ZEA homes are regardedmore so as a net-zero home becausethe homes were specifically designedfirst to reduce the amount of energythey use through a combination of
strategies. These strategies includea passive design, but also includeaspects like Energy Star appliances,LED lighting and solar water heat-ing. Then, renewable energy sourc-es, such as solar, wind, and tidalfor example, are used to supply thehome with electricity in place of thepower grid or generator fuel.
NET-ZERO STRATEGIESThe key components of a net-zerohome are used as renewable energysourcethe envelope, HVAC andventilation, and lighting and appli-ances. A net-zero home requiresa tight envelope, including thevinyl, insulated windows with low-E coating, insulation and air pen-etration barriers. The placementof the attic insulation is hugelyimportant in a warm-climate home.Correct placement of the insulationat the rooflinenot at the bottomof the attic by the truss chordsprevents having to cool the houseagainst a superheated (140 degreesFahrenheit) attic, and increase boththe R-value of the insulation andprevent air infiltration by eithersealing or using a combinationproduct like spray-foam insulationthat both insulates and seals theindoor air space from the outside,says Rutenberg.
Increasing the R-value of the wallsystem, as well as designing a morecontinuous insulation blanket thatisnt broken at every 18-inches or2 feet near studs, is another impor-tant feature in net-zero homes.Accurate third-party load calcu-lations for correct sizing of theHVAC system is hugely important,as well as then specifying highlyefficient HVAC equipmentsuchas a variable refrigerant system fol-lowed by high SEER-rated conven-tional equipment.
THE FUTURE IS ZEROAt the grand opening of the Cast-away Model III in November
2012, we announced our plans
HOME FREE
7/28/2019 Wall Ceiling
34/4533May 2013 | www.wconline.com |
for the Zero Energy America Vil-lage, which will be our first com-munity of net-zero homes in a1,600- to 2,300-square-foot rangewith pricing starting at $250,000,says Rutenberg. In these homes, agreater proportion of the sustain-
able focus will be directed towardenergy specifically, though still witha consideration for more sustainablechoices in all areas of constructionand additional customer optionsthat will allow those who desire itto build a mondo-beyondo greenhome as we have done with the firstZero Energy America homes.
In regard to the notion that sus-tainability goes hand-in-hand withconserving energy and resources,addressing questions about the sizeof the net-zero home is somethingthe Rutenberg team has been learn-ing to excel at. This is our favor-ite [topic], because we feel its oneof the most important to address,Rutenberg says. There will be
many schools of thought and anglesof approach to reducing our carbonfootprint. Some people will be will-ing to change themselves and theirown habits, and others simply willnot; you cant always change peo-ple. We praise those who are will-
ing to go the extra mile and changetheir own habits, but we also want-ed to offer a way for people to liveas they always have and still have anet-zero home with no carbon foot-print. This is why we built homes
that fit beautifully amongst theirneighbors in a luxury communityand have no additional demands onthe homeowners that live in them.As long as the market for big, beau-tiful, luxury homes is so high indemand, we will find the way to
make them big, beautiful, luxuriousand green.W&C
Cristina Toscano is associate editor with
Environmental Design + Construction
magazine.
LOCATION: Tampa, Fla.
OWNER: Marc Rutenberg Homes,
Tarpon Springs, Fla.
SIZE: 4,552 square feet
(Castaway III Model)
FEATURED PRODUCTS:
Dow insulation
Lafarge synthetic drywall
Icynene insulation
Hebel Aerated Autoclaved Concrete
PGT Energy Star windows
Sherwin-Williams low-VOC color
Blue World Crete concrete
Goodwin Heart Pine wood finishes
Eldorado cultured stone
Timberland wood doors
Masonite FSC-certified wood doors
Daltile floor and wall tiles
CERTIFICATIONS
LEED Platinum
National Green Building Standard
(NGBS) Emerald
Florida Green Building Coalition
(FGBC) Platinum (pending)
ENERGY STAR with IndoorAir Plus
(pending)
Home Energy Rating Scale (HERS)
Index: -15
Florida Water Star (pending)
Florida-Friendly Landscaping Gold
SIDEBAR
7/28/2019 Wall Ceiling
35/4534 | Walls & Ceilings | May 2013
STUCCOstop
BY ALBERT CARRILLO
of power that is safely available tous for our discretionary use. Itsreally a pretty cool thing when youthink of the convenience of using agiven device by just plugging it intoa receptacle. Our ever increasingdemand for this convenience is put-ting a strain on the cost of makingand delivering the energy. In fact, thecost of energy has hit a tipping point.
We have burned coal, dammed uprivers, used nuclear technology, andharvested the wind and sunallto make available power. But whatwe really havent done is slowed thedemand. The buildings we inhabitconsume 40 percent of all the pow-er produced. Of that, 40 percentis used to heat and cool our build-ings. So, if you havent been asleepor in a cave for the past five years,you already know that the buildingindustry and its building codes arechanging to address this very issue.Now, buildings must meet mini-mum energy efficiency requirementsand these requirements will becomemore stringent in the years to come.
Its a fact: we are building differ-
ently and will continue to do so inthe future.
I know youre thinking oldnews, Albert but wait, theresmore. In order to meet these newcurrent energy efficiency require-ments, our claddings must use con-tinuous insulation.
ASHRAE 90.12010 defines CIas, Insulation that is continuousacross all structural members with-out thermal bridges other than fas-teners and service openings. It isinstalled on the interior or exterioror is integral to any opaque surfaceof the building envelope. So, forall climate zones in the U.S., except1 and 2, cavity insulation alonewill not meet the energy efficiencyrequirements. Consider an assem-bled wall unit. (See illustration). Theframing members (studs) accountfor approximately 25 percent of thewall assembly. Insulation is placedbetween the members in the cavity,as a means to insulate our interiorenvironment. These members actu-ally act as thermal bridges that allow
for the transference (I like to think
of it as a secret passage way) of heatand cold, known as thermal bridg-ing. So, the money spent to heat
and cool our buildings can escapethrough these thermal bridges, thus,further increasing our demand andcost for energy.
RE-INTRODUCING EIFSIn the past, stucco has been appliedover CI and has performed verywell. Ill talk in detail about that inthe next column. This column willillustrate the high CI performanceof my other subject matter: A longestablished, fully tested claddingcalled exterior insulation and finishsystem. EIFS is truly, by definition, acontinuous exterior insulation clad-ding. It is a system based on continu-ous insulation and achieved by beingadhesively applied to an approvedsubstrate. There are some EIF sys-tems that are mechanically attachedbut they are an exception.
By system, I mean that thereare no interchangeable pieces andparts or different combinations ofthings to achieve a CI cladding.The system components are a cho-reographed combination of perfor-mance products from a single sourcemanufacturer. These EIF systemscan be applied to new construction,as well as be applied over existingcladdings. EIFS were created as a CIcladding and were the first kids onthe block to provide CI.
EIFS came to the U.S. in the late-60s and gained popularity duringthe energy crisis of the 1970s. Theflagship EIF system was known asa barrier system with the basecoatand mesh layer being the weatherbarrier. Fast forward to our currentconstruction times and EIFS is nowapplied in most cases with a second-ary barrier, and this is where wewill start.
The s econdary bar r i e r s o f an EIF system are monolithic inthat they are a liquid, applied byroller, spray or trowel to a givensubstrate. This continuous barri-er extends into the fenestrationstoo. So right off the get-go EIFS
provides a monolithic (continuous)
Ever wonder what it would be like if you couldnt just flip a
switch to heat or cool your indoor environment? Or if you
werent able to simply plug a device into a receptacle to
use it? Our civilized culture has created an intricate network
EIFS:A Solution for New Energy Efficiency Requirements
7/28/2019 Wall Ceiling
36/4535May 2013 | www.wconline.com |
secondary barrier. These secondarybarriers all provide moisture pro-tection for the substrate, preventair infiltration, and are also avail-able as either vapor permeable oras a vapor barrier. The vapor bar-rier versions may be beneficial incolder climates that might requireit. Most EIFS manufacturers pro-vide both versions.
WHAT MAKES UP AN EIF SYSTEMSo there are the suspenders, letslook at the belt. The rest of thesystem: foam, basecoat, mesh andfinish, a complete barrier system,doubles the protection of the build-ing against moisture intrusion. Themost widely used foam, expandedpolystyrene, is applied to the sec-ondary barrier in a running bondpattern and because it is adhered,there are no penetrations of the sec-ondary barrier. The entire perim-eter of each sheet is butted tightlyagainst the adjacent sheet forminga continuous insulation layer. TheEPS foam is made of fused polysty-rene beads which trap air betweeneach bead, offering a superior insu-lation. Since there is no edible foodsource in foam, mold will not growwithin it.
Because foam is applied to theexterior of the wall assembly, theR-value provided by the foam com-
ponent is a true value, no loss of
heat or cold via thermal bridging.By sheer nature of the makeup ofEPS foam, thermal movement isabsorbed within the foam itselfminimizing the chances of crack-ing in the lamina due to thermalexpansion and contraction. Someof the newer EIF systems now areusing extruded expanded polysty-rene (XPS) which carries a higherR-value than EPS does. XPS or EPSfunction similarly as a continuousinsulation layer. As good as theyare at insulating; neither should berun below grade or used as a roof-ing product (applied horizontally inwidths larger than 18 inches) as thismay compromise their integrity.
BASECOAT AND MESH LAYERThe real workhorse of an EIF systemis the basecoat and mesh layer. Thisis the first line of barrier defenseto fighting moisture intrusion. Thislayer must cover 100 percent of anyexposed foam to protect the insula-tion against the environment andto contain foam in fire situations.This layer, like the two under it, isalso monolithic, and continuous. Itis a simple component functioningin a complex way, fighting mois-ture, fending off UV degradation,and moving with the foam duringthe daily dance known as thermalexpansion and contraction, without
becoming compromised.
FINISH LAYERThe final component is the finish. Yes,this layer helps to shed surface waterbut primarily it is there to look awe-some. By shedding surface water thefinish helps to keep the cementitiousbasecoat from efflorescing. And likethe layers below it, it is a continuouslayer of protection. The EIFS finishesare made from high quality acrylicsand can last for many years maintain-ing a newly applied appearance.
There are many new assembliesutilizing CI that all contain varyingdegrees of complexity. The reality isthat any common cladding can beapplied over a CI layer. Many timesthough, figuring out how to properlyterminate, or integrate various com-ponentsor making sure that allof the parts and pieces fit and worktogether, can have a contractor ordesigner pulling their hair out. EIFShas been present for many years andmight even be thought of as a com-mon item, one that everyone knowsis there, but lacks a new complex-ity appeal. However, when onedissects continuous insulation anddefines the intent and performanceof a CI cladding, EIFS falls in as thetrue definition of CI.W&C
Albert Carr il lo is Ar izona Manager for
the Western Wall & Ceiling Contrac-
tors Association. He can be reached at
Thermal bridging evidenced
by lighter colors showing
where the br idging occurred
(stud/framing members).
Framing members consti-
tute 25 percent of the wall
structure that without CI,
then can allow transference
of heat or cold.
7/28/2019 Wall Ceiling
37/4536 | Walls & Ceilings | May 2013
straight
GREENBY CHRIS DIXON
how many miles to the gallon a cargets based on color. It is impossibleto do in any really meaningful way.There is so much more that needs tobe considered to really know whatproduct or material is less harm-ful to the environment that another.Energy used for extraction of rawingredients, manufacturing andtransport; in-service life expectancy;maintenance requirements; etc.
The latest and greatest draft ver-sion of LEED has been strugglingmightily with this in moving towarda more comprehensive appraisal ofthe Materials and Resources cred-its, the sixth public comment periodhaving just concluded. Although theUSGBC insists that this will be thelast public comment period beforev4 goes to ballot, public commentswould seem to indicate otherwise.Here is a small example of some ofthe most recent comments: The language relating to valua-tion factor is very confusing.
MR credits need to be radicallysimplified.
We have been reaching outto members of the LEED prac-titioner community to get theirthoughts on these credits. Theconsensus is that the way thecredits are written is overwhelm-ingly too complex.
there are inconsistencies with-in the reporting requirements,which will create frustration andconfusion for all involvedproj-ect teams, manufacturers, LEED
Reviewers, GBCI, etc.
the complexity is truly a deal-breaker for me. As a practitionerand as a state employee involvedin policy discussions, simplicity iskey - what do we want to achieveand whats the simplest manner inwhich to get there? This confusionand complexity doesnt make thiscredit more likeable or useable
Despite the issues highlighted above,the possibility that LEED will revert toa single-attribute-based materials creditis highly unlikely. LEED will eventu-ally get something finalized in the newrating system, and it will look very dif-ferent from what it does now. One ofthe most prominent and recurring fea-tures that is likely to survive the publiccomments, is the requirement for Envi-ronmental Product Declarations.
CREDIBLE THIRD PARTYASSEMENT FOR PRODUCTSThere has been some recent effortundertaken in the industry to pro-vide EPDs to the design and con-struction community. I discoveredone while reviewing a product datasheet for resilient flooring products,a third party sustainable certifica-tion based on NSF/ANSI 332 Sus-tainability Assessment Standard forResilient Floor Coverings. Prior toseeing this listed in the data sheets,I was unaware of the organizationNSF International and also unawarethat it had developed an ANSI stan-dard for the sustainability of resil-ient flooring. After a little digging, I
learned that NSF International is an
independent global organization thatwrites standards, tests and certifiesproducts for the commercial flooring,
construction, food, water and con-sumer goods industries. In additionto its resilient flooring standard, NSFhas developed more than 50 ANSIstandards, among them standards forsustainable carpet, wallcovering, fur-niture and single ply roofing.
The NSF/ANSI 332 uses a point-based system in which manufacturersachieve one of four levels of certifica-tionconformant, silver, gold or plat-inum. The language in the standardis straightforward, clear, reasonableand understandablea testament tothe rigorous process ANSI requires indeveloping any standard that bears itsname. The consensus process used todevelop the standard was built uponscientific principles, including the ISO14000 series standards on Life CycleAssessment and feedback. Productsare evaluated against the standardusing five key criteria: Product design
Product manufacturing Long-term value, Corporate governance Innovation
The criteria are incredibly compre-hensive, and include prerequisitesand point categories that includeLife Cycle Assessment, minimiza-tion of chemicals of concern, green-house gas reduction, durability andemployee injury rate, to name just afew. In total, 100 points are avail-able across eleven prerequisites and47 point-earning categories.
NSF/ANSI 332:DIGGING A LITTLE DEEPER
Jane Wilson, director of standards,NSF International, states that Certi-fication to NSF/ANSI 332 offers buy-ers of resilient flooring the highestlevel of confidence and credibility in amarket that is awash in green claims.I was able to download resilient floor-ing products certified by NSF to thisstandard by going to the NSF web-site and searching for resilient floor-ing products. The certificates for the
products I found contain only the
Assessing the comparative environmental impact
of products and materials using single attribute
characteristics, such as recycled content, point of
extraction, and VOC content, is like trying to fi gure out
Environmental Product
Declarations The New Benchmark?
7/28/2019 Wall Ceiling
38/4537May 2013 | www.wconline.com |
basic informationthe manufacturer, product, certifica-tion number and certification level. This level of reporting,however, does not provide information as to what points
were achieved and in what assessment categories.The points that a manufacturer elects to pursue inobtaining certification are optional and prerogative. Fora design professional wanting to compare one productagainst another, this information is critical. So, I sent anemail to NSF to find out how to get the full certificationdocument. The response was that this information isnot available through NSF and that I should contact themanufacturer. And so I did.
The manufacturer responded that this was informationI should ask NSF about. I explained that NSF told me thesame thing and it went up the ladder a bit with the manu-facturer. I then received information from the manufac-turer giving me only the percentages of points accumulat-ed across the five categories, nothing else. I tried anothermanufacturer that has resilient products certified to thestandardnot by NSF but UL Environment. I got nearlythe exact same run aroundboth from the manufacturerand from UL Environment.
Withholding information smacks of something far lessthan the whole point of an independent, third-party certi-fication of a product using a consensus-based ANSI stan-dard. A careful reading of the standard reveals severalpoints that look very much like business as usualthingslike recycled content in the product packaging, reportingemployee turnover rate, and profitability (gimme points).What I am interested in knowing (and where LEED and therest of the world is headed) are the other point categoriesin the standard, such as the reporting and elimination ofchemicals of concern, Life Cycle Assessment, and green-house gas reductions. Without this, the certification itselftells very little about a products true greenness.
CONCLUSIONThe introduction of independent, third-party certifiedEPDs into the market is a beautiful thing. Certificationsbased on truly consensus-based processes and proce-dures under the guiding principles of organizations suchas ANSI and ISO. But be warned: That Gold NSF/ANSI332 Certified product doesnt necessarily mean that it hasfewer chemicals of concern, lower indoor carcinogenicVOC emissions, or more recycled content than a productwith a Conformant certificationor no certification. Tomake everybody happy and to continue pushing the enve-lope, 100 percent transparency is required.
The good news is that we are getting there very quicklyand organizations like NSF, with the development ofrobust sustainable product ANSI standards, are helpingthe effort tremendously.W&C
Chris Dixon is a registered architect, Certified Construction Speci-
fier, and LEED AP. He serves on GBIs Green Globes Technical Com-
mittee and is a former USGBC Materials and Resources Technical
Advisory Group member.
7/28/2019 Wall Ceiling
39/4538 | Walls & Ceilings | May 2013
NAILPRO BALLISTICHARDENED PINSJAACO CORP.
The NPCT-3040 Air Tool is lighter,
faster, has no fuel cells and is lowmaintenance.
Its applications include:
Drywall track to concrete
and red steel
Stucco mesh to block stone
and steel
Backer board and tackless carpet
strips to concrete
For more information, visit www.jaaco.com.
EXTRA WIDE VINYLCORNER BEADPHILLIPS MANUFACTURING CO.
Phillips extensive gripSTIK vinyl dry-
wall product line recently introducedExtra Wide Vinyl Corner Bead. This 90
degree corner support provides protec-
tion for exposed edges of wallboard.
The product featu res 158-inch extra
wide flanges, perforations and deeply
knurled mud anchors for excellent joint
compound adhesion.
For more information, visit phillipsmfg.com/wc/extrawide.
NO IGNITIONBARRIER REQUIRED!DEMILEC
The companys APX is breaking the
boundaries of fire performance with
revolutionary spray foam technology.
Demilec APX is a new open cell spray
foam insulation that can be sprayed
in attics and crawl spaces without an
ignition barrier or coating. It is one of
the few products that is compliant
with the test requirements of the ICC, without the use of additional
fire protection products.
For more information, visit www.demilecusa.com.
SPEEDFLEX TTGELIMINATES TOP OF
WALL FIRESTOP CAULKSPECIFIED TECHNOLOGIES
SpeedFlex Track Top Gasket is an intu-
mescent firestop gasket that elimi-
nates firestop and acoustical caulking
in rated flat slab top-of-wall applica-
tions. Install at the same time as the ceiling track and effectively
seal the wall against fire, smoke and sound transmission during
the construction process, with significant cost savings.
For more information, visit www.stifirestop.com/ttg2.
QUALITY FIBER BASECOAT STUCCOSPEC MIX, INC.
Fiber Base Coat Stucco is formulat-
ed for optimum workability, reduced
shrinkage and maximum coverage
on every project. There is no sand
to shovel, eliminating the expenseof wasted labor and material. On
top of complete quality assurance, SPEC MIX FBC is more cost
effective. It yields up to 30 percent more stucco compared to the
same volume of bagged cement and sand shoveled into a mixer.
Available in 80-pound bags or 3,000-pound bulk bags, FBC
Stucco increases productivity and profitabilityevery time.
For more information, visit www.specmix.com.
NOISE PRODUCT SOLUTIONSFOR CODE-DRIVENPERFORMANCE NEEDSKEENE BUILDING PRODUCTS
Quiet Qurl three-dimensional noise
control products are available from
0.125 to 3/4 inch with options,