.
WCSMO-14
ProgramVersion: May 20, 2021
14th World Congress of Structural and Multidisciplinary Optimization
The support from the following sponsors is gratefully acknowledged:
Platinum Sponsor
Altair Engineering Inc.
Bronze Sponsor
Springer
2
14th World Congress of Structural and Multidisciplinary Optimization
Table of Content
1. Welcome Message
2. About ISSMO and WCSMO
3. Organization of WCSMO-14
4. Virtual Conference Platform
5. Code of Conduct
6. Plenary and State-of-the-Art Talks
7. Socializing Events
8. Acknowledgments
9. Program Overview
10. Detailed Program
11. Index of Abstract IDs and Presenters
3
14th World Congress of Structural and Multidisciplinary Optimization
Welcome to WCSMO-14
On behalf of the International Society for Structural and Multidisciplinary Optimization (ISSMO),we welcome you to the 14th World Congress of Structural and Multidisciplinary Optimization(WCSMO-14) held online from the June 13 to 18, 2021.
Originally, WCSMO-14 was scheduled to take place at the beautiful campus of the Universityof Colorado in Boulder, USA. However, due to the COVID-19 pandemic and its impact on ev-erybody’s life, traveling to Boulder became impossible. Thus, the local organizing committee inconsultation with the executive committee of ISSMO decided to convert WCSMO-14 into an allvirtual conference.
While there are undoubtedly many downsides to a virtual conference, this conference formatlowers the cost of attendance and allows participation by researchers who would not be able totravel to the US. Another important benefit of a virtual conference is the drastically reducedcarbon footprint. Thus, while a lot of us will miss meeting colleagues and friends in person, thereare also a few positive aspects of WCSMO-14 being online.
WCSMO-14 will feature 478 technical talks, two invited plenary talks, four State-of-the-Arttalks, and ten socializing events. Furthermore, the General Assembly of ISSMO will be held duringthe conference. To accommodate the different time zones of participants around the globe, thesessions are grouped into two blocks: a morning block from 7:00 - 11:00 AM US Mountain DaylightTime (MDT) and an afternoon block from 6:00 - 10:00 PM MDT. A link to an online tool forconverting these times to your local time is provided in the program.
The online format of WCSMO-14 allows for a unique approach to attending the technical talks.Starting June 1, 2021, registered attendees will be able to watch the recordings of all presentations.The recordings will be available past the conference, through August 1st, 2021. At the technicalsession scheduled during the week of the conference, each presenter will briefly introduce her/histalk in no-more than two minutes. The introduction of all presentations of a session is followed byan unmoderated poster-style discussion in breakout rooms. Participants will be able to join theposter-style discussions of presentations of their interest, conveniently switching between sessionsand presentations. Participants are strongly encouraged to watch the recordings of the presentationsand post questions before the live session featuring the presentations of interest.
To enhance the interaction among attendees and to promote the lively exchange of ideas, severalsocializing events are scheduled. Outside these events, participants are encouraged to meet infor-mally in the virtual networking lounge. It is recommended that participants familiarize themselveswith the virtual conference platform and other online features. Links to a set of training videos areprovided in this program.
We hope that you will enjoy WCSMO-14 and, please, do not hesitate to contact us if you haveany questions or comments. Your feedback is appreciated very much.
The Local Organizing Committee of WCSMO-14
Alireza Doostan, John Evans, James Guest, Kurt Maute, Julian Norato
4
14th World Congress of Structural and Multidisciplinary Optimization
About ISSMO and WCSMO
The International Society for Structural and Multidisciplinary Optimization (ISSMO) was foundedin October 1991. Today ISSMO has almost one thousand members from more than 50 countries.The objectives of ISSMO are:
• to stimulate and promote research into all aspects of the optimal design of structures as wellas multidisciplinary design optimization where the involved disciplines deal with the analysisof solids, fluids or other field problems
• to encourage practical applications of optimization methods and the corresponding softwaredevelopment in all branches of technology
• to foster the interchange of ideas amongst various fields contributing to structural and mul-tidisciplinary optimization
• to support the role of optimization in multidisciplinary design
• to provide a framework for the organization of meetings and other means for the disseminationof knowledge on structural and multidisciplinary optimization and
• to promote teaching of structural and multidisciplinary optimisation in tertiary institutions.
One of the aims of ISSMO is to bring together researchers and practitioners in the field of struc-tural and multidisciplinary optimization (SMO), by means of international meetings having a highscientific standard. Host selection criteria for these meetings include: up-to-date conference facil-ities, affordable costs to all members of the society (including registration, hotel, travel expenses,considering also free lunches, banquet, excursions etc.), proven congress organizing experience andstrength of the local organizing group, geographical diversity reflecting the distribution of SMOresearchers over the world.
This is meant to imply a reasonably uniform distribution of congresses over three zones, namelyAsia-Australia, Europe-Africa and North & South Americas. Along these lines, ISSMO has heldbiennial World Congresses of Structural and Multidisciplinary Optimization since 1995:
• Goslar, Germany in 1995 (WCSMO-1)
• Zakopane, Poland in 1997 (WCSMO-2)
• Buffalo, United States in 1999 (WCSMO-3)
• Dalian, China in 2001 (WCSMO-4)
• Lido di Jesolo, Italy in 2003 (WCSMO-5)
• Rio de Janeiro, Brazil in 2005 (WCSMO-6)
• Seoul, South Korea in 2007 (WCSMO-7)
• Lisbon, Portugal in 2009 (WCSMO-8)
• Shizouka, Japan in 2011 (WCSMO-9)
• Orlando, United States in 2013 (WCSMO-10)
5
14th World Congress of Structural and Multidisciplinary Optimization
• Sydney, Australia in 2015 (WCSMO-11)
• Braunschweig, Germany in 2017 (WCSMO-12)
• Bejing, China in 2019 (WCSMO-13)
ISSMO Executive Committee:
Wei Chen, President Northwestern University
Alicia Kim, Secretary General University of California, San Diego
Ming Zhou, Vice President Altair Engineering Inc.
Qing Li, Vice President University of Sydney
Erik Lund, Treasurer Aalborg University
Pierre Duysinx University of Liège
Xu Guo Dalian University of Technology
Ole Sigmund Technical University of Denmark
Gengdong Cheng, Past President Dalian University of Technology
James K. Guest, Past Secretary General Johns Hopkins University
6
14th World Congress of Structural and Multidisciplinary Optimization
Organization of WCSMO-14
Local organizing Committee:
John Evans University of Colorado Boulder
Alireza Doostan University of Colorado Boulder
James K. Guest Johns Hopkins University
Kurt Maute (conference chair) University of Colorado Boulder
Julian Norato University of Connecticut
International Paper Committee (IPC):
Alireza Doostan University of Colorado Boulder
Alicia Kim (IPC chair) University of California, San Diego
Samy Missoum University of Arizona
Yoo Jeong Noh Pusan National University
Matthias Wallin Lund University
Peng Wei South China University of Technology
7
14th World Congress of Structural and Multidisciplinary Optimization
Virtual Conference Platform
The virtual conference platform has been built and operated by the Denver-based company, ImageAudiovisuals Inc. All participants will receive an email prior to June 1, 2021, with the web addressof the login page and instructions for logging in.
The virtual conference platform features several functions that allow the participants to assem-ble an individual conference schedule, participate in plenary and technical sessions and socializingevents. The technical sessions and the Coffee Break room will be using Zoom. The Meet and Greetnetworking and socializing space will be using Wonder.me. All participants are strongly encouragedto familiarize themselves with these functions prior to the start of the live part of the conferenceon June 13, 2021.
All attendees need a Zoom account. Free Zoom accounts can be created at https://zoom.us/freesignup/. If possible, attendees should use the same email address they used for registeringfor the conference when creating their Zoom account. If attendees already have a Zoom accountunder a different email address, this will work too.
Please, visit the following web-site for training video for participants, presenters, and session chairs:
http://www.wcsmo14.org/instruction-and-training-videos/
The videos will be available May 28. In addition, questions to frequently asked questions can befound at:
https://www.wcsmo14.org/faqs/
8
14th World Congress of Structural and Multidisciplinary Optimization
Code of Conduct
All attendees of WCSMO-14 have agreed by registering for the conference to the following code ofconduct:
• The recording and/or transmission of sessions in any format is strictly prohibited. You agreeto not reproduce or repurpose presentation materials in any way without the express consentfrom the presenter. Recording, copying, or taking screen shots of Q&A or any chat roomactivity that takes place in the virtual conference is prohibited as violation of copyright.
• All attendees are expected to show respect and courtesy to other attendees. There will bezero tolerance for any form of discrimination or harassment. All communication should beappropriate for a professional audience including people of all backgrounds. All participants,including, but not limited to, attendees, speakers, volunteers, exhibitors, staff members, andservice providers are expected to abide by this policy. WCSMO-14 reserves the right totake any action deemed necessary and appropriate, including immediate removal from theWCSMO-14 virtual platform without warning or refund, in response to any incident of un-acceptable behavior.
9
14th World Congress of Structural and Multidisciplinary Optimization
Acknowledgments
WCSMO-14 would not have been possible without the excellent support of a large number of peoplewho the local organizing committee would like to thank.
University of Colorado Conference Services:
Jessica Follett, Amy Martinez
Image Audiovisuals Inc:
Garrett Bicknell, Briana Norton, Rob Wright
WCSMO-14 Website Development:
Carlos Hernan Villanueva
10
14th World Congress of Structural and Multidisciplinary Optimization
Plenary and State-of-the-Art Talks
Plenary Talks
Structural Optimization. Questions from Boeing
Vladimir Balabanov, BoeingMonday, June 14, 20201, 7:00 AM - 7:50 AM MDT, Auditorium
Autonomous Optimization and Control of Energy Systems
Andrey Bernstein, National Renewable Energy LaboratoryTuesday, June 15, 20201, 6:00 PM - 6:50 PM MDT, Auditorium
11
14th World Congress of Structural and Multidisciplinary Optimization
State-of-the-Art Talks
Continuing the tradition of previous WCSMO conferences, current and emerging research in struc-tural and multidisciplinary design optimization will be presented in the following State-of-the-Art(SOTA) talks:
SOTA - Talks 1Thursday, June 17, 6:00 PM - 6:50 PM, Auditorium
Topology optimization: methodologies and applicationJosephine Carstensen, Massachusetts Institute of Technology
From Surrogate Modeling to Physics-informed Neural Networks – What Has MachineLearning Done for Engineering Analysis and Design?Felipe Viana , University of Central Florida
SOTA - Talks 2Friday, June 18, 7:00 AM - 7:50 AM, Auditorium
Digital transformation and optimizationYoo Jeong Noh, Pusan National University
System analysis and design in uncertaintyMathieu Balesdent, ONERA - The French Aerospace Lab
12
14th World Congress of Structural and Multidisciplinary Optimization
Socializing Events
To promote and enhance the interaction of attendees outside the technical sessions, WCSMO-14will feature several socializing events. Some of these are mainly for entertainment, some focus onnetworking and career development, and others provide a forum for discussions around technicaltopics.
Please, note that for some of these events we ask attendees to sign-up in advance.This will ease the planning of the specific event and event organizers can reach outto the participants in advance. Whether signing-up is required is indicated with eachevent.
ISSMO Women Networking
The ISSMO Women Networking Event will be held twice during WCSMO-14. The tentativecontent includes a mentoring session featuring several female panelists and a networking ses-sion. This event aims to create a venue for junior and senior women researchers from varyingbackgrounds to share their career paths, career development options, work-life balance, andbecome mentors or mentees. The event also provides opportunities for researchers to discussresearch interests and establish collaborations. All female researchers at all career stages areinvited to attend.
Organizer: X. Shelly Zhang, University of Illinois Urbana-Champaign,[email protected]
Time: Sunday, June 13, 7:00 PM – 7:50 PM MDT, Networking Lounge: Meetand GreetThursday, June 17, 10:00 AM – 11:00 AM MDT, Networking Lounge:Meet and Greet
Note: Sign-up is required; please, visit: Sign-up Page
Young Investigator Workshop
Young professionals (i.e., professionals less than 40 years of age) are invited to participatein a Young Investigator Workshop. During this workshop, young professionals will have anopportunity to ask questions of successful mid- and late-career professionals and researchersin an intimate small group setting. Workshop topics of interest include: Planning for aCareer in Research in Academia or Industry, Surviving the Job Search, Getting Started ina New Position, Preparing Your First Grant Proposal, Maintaining a Work-Life Balance.Interested individuals are encouraged to participate in either the evening workshop on June15 or the morning workshop on June 16.
13
14th World Congress of Structural and Multidisciplinary Optimization
Organizer: John Evans, University of Colorado Boulder,[email protected]
Time: Tuesday, June 15, 9:00 PM – 10:00 PM MDT, Networking Lounge:Meet and GreetWednesday, June 16, 10:00 AM – 11:00 AM MDT, Networking Lounge:Meet and Greet
Note: Sign-up is required; please, visit: Sign-up Page
Conference Talk Show
One of the major disadvantages of WCSMO-14 being virtual is the lack for social gatheringsafter the technical sessions. The goal of this one-hour live event is to better engage theattendees and to add a personal touch to WCSMO-14 that is typically missing from virtualconferences. The Conference Talk Show will feature a colloquial conversation about mainlynon-technical topics; just like colleagues meeting after the technical sessions at an in-personconference for dinner and chat. The idea is to do something similar at WCSMO-14 in a talkshow style event where three guests and one host will engage in some hopefully interestingand entertaining discussions, which will be live broadcasted via zoom. The audience will beable to ask questions via chat.
Organizer: Kurt Maute, University of Colorado Boulder, [email protected]: Monday, June 14, 10:00 AM – 11:00 AM MDT, Networking Lounge:
Meet and GreetMonday, June 14, 9:00 PM – 10:00 PM MDT, Networking Lounge:Meet and Greet
Note: No sign-up is required
Design Optimization in Practice
This event will feature a diverse industry panel with participants from different areas. Thepanelists will discuss where and how design optimization is currently used, what challenges itfaces, and what issues need more attention from the research community. Additional topicsmay include career pathways in the panelists’ companies related to design optimization.Panelists will provide advice for young researchers currently working on design optimizationhow to prepare themselves for a successful career in industry. The audience will be able toask questions via chat.
Organizer: Julian Norato, University of Connecticut, [email protected]: Friday, June 18, 10:00 AM – 11:00 AM, Networking Lounge: Meet and
GreetNote: No sign-up is required
14
14th World Congress of Structural and Multidisciplinary Optimization
Discussion Roundtables
High Performance Computing (HPC) in large-scale structural optimization
The roundtable will focus on the use of High Performance Computing (HPC) in large-scalestructural optimization. The discussion will cover, but is not limited to, subjects such as:How to get started with HPC for structural optimization, low level (MPI/PETSc) vs. highlevel (FEniCS, deal.ii, MFEM, etc.) frameworks, design of preconditioners - matrix vs.matrix-free, dynamics and multiphysics, structured vs. unstructured meshes, and remeshingin parallel and the use of accelerators (GPU/FPGA).
Organizer: Niels Aage, Technical University of Denmark, [email protected]: Monday, June 14, 10:00 AM – 11:00 AM MDT, Networking Lounge:
Meet and GreetNote: Sign-up is required; please, visit: Sign-up Page
Software design, development and management practices
This Roundtable focuses on all aspects of software design, development and managementpractices to produce Multidisciplinary Design, Analysis and Optimization (MDAO) soft-ware for High Performance Computing (HPC) applications. This Roundtable is a venuefor researchers, developers and end-users from academia, industry and government to shareexperiences, ideas and best practices applied to HPC software development and operations.Topics of interest include, but are not limited to: Software development team management,Software development and operations, Software test repository management, Software designpatterns, HPC software libraries, HPC algorithmic design, Performance portability, Opensource software, Test driven development, Hybrid parallel computing, Parallel computing,and GPU acceleration.
Organizer: Miguel Aguilo, Sandia National Laboratories, [email protected]: Wednesday, June 16, 9:00 PM – 10:00 PM MDT, Networking Lounge:
Meet and GreetNote: Sign-up is required; please, visit: Sign-up Page.
Artificial Intelligence and Machine Learning
This round table discusses challenges and opportunities in developing a coherent frameworkthat enables blending conservation laws, physical principles, and/or phenomenological be-haviors expressed by differential equations with the vast data sets available in many fieldsof engineering, science, and technology. At the intersection of probabilistic machine learn-ing, deep learning, and scientific computations, we will discuss promising new directionsfor harnessing the long-standing developments of classical methods in applied mathematicsand mathematical physics to design learning machines with the ability to operate in com-
15
14th World Congress of Structural and Multidisciplinary Optimization
plex domains without requiring large quantities of data. In particular, we will discuss threecomplementary directions: (1) data-efficient learning machines capable of leveraging the un-derlying laws of physics, expressed by time dependent and non-linear differential equations,to extract patterns from high-dimensional data generated from experiments, (2) novel numer-ical algorithms that can seamlessly blend equations and noisy multi-fidelity data, infer latentquantities of interest (e.g., the solution to a differential equation), and naturally quantifyuncertainty in computations, and (3) machine learning optimization algorithms to acceleratedesign optimization under uncertainty. We will try to expose some open challenges in solv-ing forward, inverse, data assimilation, design optimization, model discovery and uncertaintyquantification problems using the emerging field of physics-informed machine learning.
Organizer: Raissi Maziar and Subhayan De, University of Colorado Boulder,[email protected], [email protected]
Time: Thursday, June 17, 9:00 PM – 10:00 PM MDT, Networking Lounge:Meet and Greet
Note: Sign-up is required; please, visit: Sign-up Page.
16
14th World Congress of Structural and Multidisciplinary Optimization
Program Overview
17
14th World Congress of Structural and Multidisciplinary Optimization
About the Conference Program
One of the primary challenges of a virtual international conference, such as WCSMO-14, isthe diversity of the time zones of the participants.To accommodate these different time zones, the sessions are grouped into two blocks: amorning block from 7:00- 11:00 AM US Mountain Daylight Time (MDT) and an afternoonblock from 6:00 - 10:00 PM MST. A time conversion table is given below. An online tool toconvert MDT times into local times can be found at: Time Zone Converting Tool
The overall schedule is shown in the table below. For assignment of talks to sessions andsessions to time slots, we primarily considered the thematic fit but also the time zone ofthe presenter. Strictly assigning presenters to the most convenient time slot within thepresenters business hours would have led to a geographically divided conference. Instead, topromote geographical diversity, we assigned presenters from East Asia to the early morningblock slots. These slots do not require attendees from East Asia to stay up too late. Thisscheduling approach led to a slight imbalance between the two blocks with overall morepresentations in the morning blocks. Furthermore, the originally schedule Friday eveningblock was no longer needed.
18
14th World Congress of Structural and Multidisciplinary Optimization
Presentations and Session Format
The recordings of the presentations will be available online through the conference platformfrom June 1, 2021, through August 1, 2021.The technical sessions take place during the week of the conference, from June 13 through18. Up to five 50-minute sessions run in parallel. Each session is assigned a Zoom room. Atthe beginning of a session, each presenter will briefly introduce her/his talk in no-more thantwo minutes. After this introduction, the session is split up into breakout rooms, one for eachpresenter. In these breakout rooms, presenters and participants can discuss the presenter’swork. Participants can join the discussions of presentations of their interest, convenientlyswitching between sessions and presentations.Participants are strongly encouraged to watch the recordings of the presentations and postquestions prior to the live session featuring the presentations of interest.
19
14th World Congress of Structural and Multidisciplinary Optimization
Sunday - June 13, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Time: 7:00 PM - 7:50 PM MDT
Room SessionLounge Socializing - 1
Monday - June 14, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Time: 7:00 AM - 7:50 AM MDT
Room SessionAuditorium Plenary - 1
Time: 8:00 AM - 8:50 AM MDT
Room SessionA Design optimization considering fracture, damage and fatigue - IB Inverse problems and parameter identification - IC Design optimization for optics and electromagnetics applications - ID Design optimization of heat exchangers and other thermo-fluid applica-
tions - IE Multi-scale topology optimization - I
Time: 9:00 AM - 9:50 AM MDT
Room SessionA Design for biomedical applications - IB Robust design and reliability-based design optimization - IC Design optimization for optics and electromagnetics applications - IID Design optimization of heat exchangers and other thermo-fluid applica-
tions - II
20
14th World Congress of Structural and Multidisciplinary Optimization
E Multi-scale topology optimization - II
Time: 10:00 AM - 11:00 AM MDT
Room SessionLounge Socializing - 2
Monday - June 14, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Time: 6:00 PM - 6:50 PM MDT
Room SessionA Design for biomedical applications - IIB Robust design and reliability-based design optimization - IIC Multi-scale topology optimization - III
Time: 7:00 PM - 7:50 PM MDT
Room SessionA Design optimization considering fracture, damage and fatigue - IIB Inverse problems and parameter identification - IIC Robust design and reliability-based design optimization - IIID Design optimization for optics and electromagnetics applications - III
Time: 8:00 PM - 8:50 PM MDT
Room SessionA Robust design and reliability-based design optimization - IVB Design optimization for optics and electromagnetics applications - IVC Multi-scale topology optimization - IV
Time: 9:00 PM - 10:00 PM MDT
21
14th World Congress of Structural and Multidisciplinary Optimization
Room SessionLounge Socializing - 3
Tuesday - June 15, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Time: 7:00 AM - 7:50 AM MDT
Room SessionA Design of compliant mechanismsB Reduced-order models in design optimizationC Design optimization with applications to aerospace problems - ID Machine learning for design optimization - IE Design optimization for advanced manufacturing - I
Time: 8:00 AM - 8:50 AM MDT
Room SessionA Raphael “Rafi” T. Haftka Memorial Session - IB Design optimization with applications to aerospace problems - IIC Topology optimization for fluids - ID Machine learning for design optimization - IIE Design optimization for advanced manufacturing - II
Time: 9:00 AM - 9:50 AM MDT
Room SessionA Raphael “Rafi” T. Haftka Memorial Session - IIB Evolutionary and zero-order methods for structural optimization - IC Moving morphable component methods - ID Design optimization with applications to aerospace problems - IIIE Design optimization for advanced manufacturing - III
22
14th World Congress of Structural and Multidisciplinary Optimization
Time: 10:00 AM - 11:00 AM MDT
Room SessionLounge Socializing - 4
Tuesday - June 15, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Time: 6:00 PM - 6:50 PM MDT
Room SessionAuditorium Plenary - 2
Time: 7:00 PM - 7:50 PM MDT
Room SessionA Evolutionary and zero-order methods for structural optimization - IIB Topology optimization for fluids - IIC Design optimization of heat exchangers and other thermo-fluid applica-
tions - III
Time: 8:00 PM - 8:50 PM MDT
Room SessionA Moving morphable component methods - IIB Topology optimization for fluids - IIIC Design optimization of heat exchangers and other thermo-fluid applica-
tions - IV
Time: 9:00 PM - 10:00 PM MDT
Room SessionLounge Socializing - 5
Wednesday - June 16, 2021
23
14th World Congress of Structural and Multidisciplinary Optimization
Morning Sessions – 7:00 - 11:00 AM MDT
Time: 7:00 AM - 7:50 AM MDT
Room SessionAuditorium ISSMO General Assembly
Time: 8:00 AM - 8:50 AM MDT
Room SessionA Isogeometric methods in design optimizationB Optimization of contact and interface problemsC Design optimization accounting for material nonlinear behavior - ID Design optimization for civil enginering and architectural design - IE Design of composite structures - I
Time: 9:00 AM - 9:50 AM MDT
Room SessionA Topology optimization for solid mechanicsB Design optimization accounting for material nonlinear behavior - IIC Design optimization for civil enginering and architectural design - IID Design of composite structures - IIE Novel topology optimization techniques - I
Time: 10:00 AM - 11:00 AM MDT
Room SessionLounge Socializing - 6
Wednesday - June 16, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Time: 6:00 PM - 6:50 PM MDT
24
14th World Congress of Structural and Multidisciplinary Optimization
Room SessionA Design of composite structures - IIIB Novel topology optimization techniques - IIC Machine learning for design optimization - IIID Design optimization for advanced manufacturing - IV
Time: 7:00 PM - 7:50 PM MDT
Room SessionA Design of composite structures - IVB Novel topology optimization techniques - IIIC Machine learning for design optimization - IVD Design optimization for advanced manufacturing - V
Time: 8:00 PM - 8:50 PM MDT
Room SessionA Design of composite structures - VB Novel topology optimization techniques - IVC Machine learning for design optimization - VD Design optimization for advanced manufacturing - VI
Time: 9:00 PM - 10:00 PM MDT
Room SessionLounge Socializing - 7
Thursday - June 17, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Time: 7:00 AM - 7:50 AM MDT
Room Session
25
14th World Congress of Structural and Multidisciplinary Optimization
A Multi-objective topology optimizationB Level set methodsC Design optimization of acoustic materials and devices - ID Shape optimization - IE Design optimization considering eigenfrequency and dynamics - I
Time: 8:00 AM - 8:50 AM MDT
Room SessionA Design optimization with applications to automotive problems - IB Design of metamaterials - IC Surrogate modeling for design optimization - ID Shape optimization - IIE Design optimization considering eigenfrequency and dynamics - II
Time: 9:00 AM - 9:50 AM MDT
Room SessionA Stress-constrained topology optimization - IB Design optimization with applications to automotive problems - IIC Shape optimization - IIID Design optimization considering eigenfrequency and dynamics - IIIE Novel topology optimization techniques - V
Time: 10:00 AM - 11:00 AM MDT
Room SessionLounge Socializing - 8
Thursday - June 17, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Time: 6:00 PM - 6:50 PM MDT
26
14th World Congress of Structural and Multidisciplinary Optimization
Room SessionAuditorium Plenary - 4
Time: 7:00 PM - 7:50 PM MDT
Room SessionA Stress-constrained topology optimization - IIB Design optimization of acoustic materials and devices - IIC Design of metamaterials - IID Design optimization for advanced manufacturing - VII
Time: 8:00 PM - 8:50 PM MDT
Room SessionA Surrogate modeling for design optimization - IIB Design optimization considering eigenfrequency and dynamics - IVC Machine learning for design optimization - VI
Time: 9:00 PM - 10:00 PM MDT
Room SessionLounge Socializing - 9
Friday - June 18, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Time: 7:00 AM - 7:50 AM MDT
Room SessionAuditorium Plenary - 5
Time: 8:00 AM - 8:50 AM MDT
Room SessionA Multi-material topology optimization
27
14th World Congress of Structural and Multidisciplinary Optimization
B SoftwareC Truss topology optimization - ID Topology optimization considering uncertainty - IE Optimization algorithms - I
Time: 9:00 AM - 9:50 AM MDT
Room SessionA Topology optimization with manufacturing constraintsB Truss topology optimization - IIC Topology optimization considering uncertainty - IID Optimization algorithms - II
Time: 10:00 AM - 11:00 AM MDT
Room SessionLounge Socializing - 10
28
14th World Congress of Structural and Multidisciplinary Optimization
Detailed Program
29
14th World Congress of Structural and Multidisciplinary Optimization
Sunday - June 13, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Socializing - 1
Day: Sunday - June 13, 2021Time: 7:00 PM - 7:50 PM MDTRoom: Lounge
Event OrganizerISSMO Women Networking 1 X. Shelly Zhang
30
14th World Congress of Structural and Multidisciplinary Optimization
Monday - June 14, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Plenary - 1
Day: Monday - June 14, 2021Time: 7:00 AM - 7:50 AM MDTRoom: Auditorium
Title PresenterPlenary Lecture 1 - Structural Optimization. Questions fromBoeing
Vladimir Balabanov
Design optimization considering fracture, damage and fatigue - I
Day: Monday - June 14, 2021Time: 8:00 AM - 8:50 AM MDTRoom: A
ID Title Presenter93 Topology optimization of damage-resistant structures
with a predefined load-bearing capacityTobias Barbier
143 Fail-safe optimization of 3D tubular frame structures un-der stress and fatigue constraints
Suguang Dou
207 First-Order Reliability Approach for Fatigue ResistantTopology Optimization of Elastoplastic Structures
Piotr Tauzowski
254 Formulation of fatigue strength criteria in a topologyoptimisation method based on NURBS hyper-surfaces
Khalil Refai
418 Topology optimization in fracture mechanics using alevel-set method
Jeet Desai
479 Material Optimization to Enhance Delamination Resis-tance of Heterogeneous Structures
Sukhminder Singh
31
14th World Congress of Structural and Multidisciplinary Optimization
Inverse problems and parameter identification - I
Day: Monday - June 14, 2021Time: 8:00 AM - 8:50 AM MDTRoom: B
ID Title Presenter92 Numerical experiments for cavity shape identification
analysis using hammering test data based on level-settype topology optimization
Takahiko Kurahashi
94 An efficient inverse strategy to estimate loading fromstrain measurements
Daniel Wilke
208 Identification of the dynamic response of storage racks:experiments and optimization
Paolo Venini
253 An efficient structural parameter identification methodconsidering non-probabilistic uncertainties and correla-tions
Heng Ouyang
260 An enhanced framework of model calibration using themodular Bayesian approach for identifiability problem
Hwisang Jo
288 Effects of mode shapes on crack identification basedon finite-element model updating and inverse eigenvalueanalysis
Jun Isshiki
370 A Robust Design Framework for Sensor Numberand Placement Optimization under Uncertainty inVibration-Based Damage Detection of Composite Struc-tures
Haichao An
Design optimization for optics and electromagnetics applications - I
Day: Monday - June 14, 2021Time: 8:00 AM - 8:50 AM MDTRoom: C
32
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter17 Shape Optimization for Electromagnetic Applications in
the Frequency DomainKristian Jensen
60 Two-layer design for microwave scattering structure us-ing a conductive material and dielectric materials
Mingook Jung
173 Shape optimization for the strong routing of light Juan Carlos AraujoCabarcas
189 Multi-Physics Topology Optimization of PhotonicBandgap Metamaterials with Elasticity and ThermalConductivity Constraints
Kenneth Swartz
468 Shape optimization of a rotating electric machine usinga space-time finite element method
Alessio Cesarano
Design optimization of heat exchangers and other thermo-fluid applications - I
Day: Monday - June 14, 2021Time: 8:00 AM - 8:50 AM MDTRoom: D
ID Title Presenter61 Topology optimization of a surface cooler using a con-
tinuous adjoint turbulence modelQuentin Holka
95 Topography optimisation for parallel plate heat ex-changers
Joe Alexandersen
140 Topology optimization for conjugated heat transferbased on Darcy flow analysis in industrial software
Robert Dienemann
182 Reaction-Diffusion Equation-based Topology Optimiza-tion: a novel framework for 2D and 3D Thermal Fluid-Structure System Design
Hao Li
268 On topology optimization of two fluid heat exchangersand their post-evaluation
Casper Andreasen
Multi-scale topology optimization - I
Day: Monday - June 14, 2021Time: 8:00 AM - 8:50 AM MDTRoom: E
33
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter115 Two-scale Concurrent Structural Topology Optimiza-
tion with Connectable MicrostructuresPai Liu
128 On the utility of cellular designs in mechanical and ther-mal applications in the context of powder-based additivemanufacturing
Bich Ngoc Vu
190 Optimal and continuous multilattice embedding Emily Sanders252 Isogeometric Optimisation of Lattice-Skin Structures Xiao Xiao449 Multiscale design of coated structures with periodic infill
for vibration suppressionEddie Wadbro
Design for biomedical applications - I
Day: Monday - June 14, 2021Time: 9:00 AM - 9:50 AM MDTRoom: A
ID Title Presenter187 Growth-Driven Optimization of Bone Scaffolds David Cohen201 Multi-objective design optimization of 3D microarchi-
tectured implantsEric Garner
266 Topology Optimization using PETSc: a Python wrap-per and extended functionality for the design of biome-chanical structures
Thijs Smit
439 Level set topology optimization for artificial tissue vas-cularization
Douglas de AquinoCastro
478 Adjoint shape optimization for hyperelastic structuresand fluid-structure interaction
Lars Radtke
Robust design and reliability-based design optimization - I
Day: Monday - June 14, 2021Time: 9:00 AM - 9:50 AM MDTRoom: B
34
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter50 Robust Design Optimization with Design-Dependent
Random Input Variables using the Reciprocal First-Order Second-Moment Method
Benedikt Krieges-mann
463 A Kriging-assisted Hybrid Adaptive Single Loop Ap-proach for Reliability-based Design Optimization
Dequan Zhang
495 Robust optimization and design space visualization ap-plied on drivetrain design
Jan Stroobants
548 A Robust Beam Model for Nonlinear Structural Analy-sis of Highly Flexible Aircraft Wings through AdaptivePreconditioning
David Solano
Design optimization for optics and electromagnetics applications - II
Day: Monday - June 14, 2021Time: 9:00 AM - 9:50 AM MDTRoom: C
ID Title Presenter271 General method for computing fundamental perfor-
mance bounds for photonic design problemsPengning Chao
298 Optimizing the electro-momentum coupling in piezo-electric composites
Majd Kosta
371 3D-Printable Large-Area Metalenses Designed usingFull-Maxwell based Topology Optimization
Rasmus Christiansen
373 Non-parametric shape optimization for electromagneticapplications
Stefan Reitzinger
498 Topology optimization of microwave frequency multi-plexers
Ahmad Bokhari
Design optimization of heat exchangers and other thermo-fluid applications - II
Day: Monday - June 14, 2021Time: 9:00 AM - 9:50 AM MDTRoom: D
35
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter118 Design of two-scale liquid-cooled heat sink based on
topology optimization and bionic methodMin Xiong
141 Topology optimization of fluid-to-fluid heat exchangerswith body-fitted meshes
Grégoire Allaire
176 2.5D Topology Optimization of Heat Sinks with Ex-truded Fins
Brice Rogie
185 Topology Optimization of 2D Heat Exchangers for Im-proving Heat Exchange Performance based on Isogeo-metric Analysis
Xuan Liang
408 Adaptive XIGA Level Set-based Topology Optimizationfor Conjugate Heat Transfer Problems
Lise Noel
Multi-scale topology optimization - II
Day: Monday - June 14, 2021Time: 9:00 AM - 9:50 AM MDTRoom: E
ID Title Presenter212 Surrogate models of elastic responses from truss lattices
for multiscale designCharles Jekel
249 Hierarchical Topology Optimization of Stiffened Thin-walled Structures
Zitong Zhou
465 Towards Two-Scale Topology Optimization respectingBuckling on Micro- and Macroscale
Daniel Hübner
521 Stress minimization for lattice structures Alex Ferrer555 Topology Optimization of Functionally Graded Porous
Structures under Transient LoadsFrancisco Ramírez-Gil
Socializing - 2
Day: Monday - June 14, 2021Time: 10:00 AM - 11:00 AM MDTRoom: Lounge
36
14th World Congress of Structural and Multidisciplinary Optimization
Event OrganizerConference Talk Show 1 - Guests: Wei Chen, Glaucio Paulino,Ole Sigmund
Kurt Maute
Roundtable: High Performance Computing (HPC) in large-scale structural optimization
Niels Aage
37
14th World Congress of Structural and Multidisciplinary Optimization
Monday - June 14, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Design for biomedical applications - II
Day: Monday - June 14, 2021Time: 6:00 PM - 6:50 PM MDTRoom: A
ID Title Presenter264 An Overview of Optimization Studies Related to
COVID-19Elizabeth Jordan
432 Analysis and Non-deterministic Optimization of Coro-nary stents under biological and surgical uncertainties
Nai Chun Liu
442 Identification of a bone growth for an individual patientof idiopathic scoliosis based on medical image data
Yasutaka Mitsumoto
471 Topology optimization of prosthetic structures for boneremodeling criteria
Qing Li
487 Optimization of the Walking Pattern by Utilizing BaseMotions Through Singular Value Decomposition
Cem Guzelbulut
559 Topology Optimization incorporating Nonlinear Mate-rial and Geometry applied to Coronary Stents
Thomas Wilson
Robust design and reliability-based design optimization - II
Day: Monday - June 14, 2021Time: 6:00 PM - 6:50 PM MDTRoom: B
38
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter27 Exact analytical PDFs of responses and reliabilities for
stochastic static and dynamic systemsJiaran Liu
45 Static and dynamic reliability-based design optimizationwith multiple most probable points based on direct prob-ability integral method
Xiaolan Li
58 A novel saddlepoint approximation and its applicationto structural reliability-based design optimization
Bach Do
66 Inherently Robust Designs via Stochastic Reduced Or-der Modeling
Miguel Aguilo
368 Reliability-Based Design Optimization Using GaussianProcess of Pouch Battery Pack in Stack Pressure Per-spective
Hyunhee Choi
Multi-scale topology optimization - III
Day: Monday - June 14, 2021Time: 6:00 PM - 6:50 PM MDTRoom: C
ID Title Presenter296 Smooth Material Representation for the Multi-scale
Topology Optimization Method by Deep Semantic Fea-ture Learning
Minsik Seo
342 Multi-scale Topology Design of Porous HeterogeneousMaterial-structure
Xiaonan Su
369 Concurrent topology optimization for cellular high con-ductive heat sink with high stiffness
Musaddiq Al Ali
563 Multiscale Topology Optimization via Multiscale Opti-mization Problems and Neural Network Surrogate Mod-els
Joel Najmon
Design optimization considering fracture, damage and fatigue - II
Day: Monday - June 14, 2021Time: 7:00 PM - 7:50 PM MDTRoom: A
39
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter291 A path-dependent level set periodic topology optimiza-
tion with fracture criterionSimon Thomas
356 Damage identification from noisy frequency responsesusing topology optimization and lasso regularization
Akira Saito
429 Topology optimization for controlling crack propagationangle
Yupeng Sun
431 Data-driven and Topological Design of Structural Meta-materials for Fracture Resistance
Daicong Da
484 Fundamental study of topology optimization for brittle-ductile composites
Hiroya Hoshiba
Inverse problems and parameter identification - II
Day: Monday - June 14, 2021Time: 7:00 PM - 7:50 PM MDTRoom: B
ID Title Presenter149 Inverse Design of Spatial Phase Modulation for Pro-
grammable Localization in Plasmonic MetasurfaceDoksoo Lee
324 Constraint Autoencoder Dimension Reduction Methodfor Inverse Problem
Zhiping Hou
361 Uncertainty Inverse Method for Parameters Identifica-tion of Robot Arms Based on Two-way Neural Network
Lutong Shi
426 A Model Updating Framework for Digital Twin with AnInsufficient Prior Knowledge
Wongon Kim
444 Comparison of statistical validation metrics for accuratevalidation with hypothesis testing
Hyejeong Son
Robust design and reliability-based design optimization - III
Day: Monday - June 14, 2021Time: 7:00 PM - 7:50 PM MDTRoom: C
40
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter25 Robust optimization of structures under unilateral con-
tacts with uncertain initial gapsYoshihiro Kanno
53 Direct probability integral method for uncertainty quan-tification and design optimization of structures
Dixiong Yang
111 An Efficient Gradient-Based Method for Reliability-Based Design Optimization Combined with ProbabilityDensity Evolution Method
Lili Weng
290 Sequentially Approximated Feasibility Robustness withScenario Generation and Optimization
Randall Kania
535 Robust design optimization using interpretable self-organizing map
Deepak Nagar
Design optimization for optics and electromagnetics applications - III
Day: Monday - June 14, 2021Time: 7:00 PM - 7:50 PM MDTRoom: D
ID Title Presenter137 A magneto-structural topology optimization method
with additive manufacturing constraintsYingchun Bai
316 Topology Optimization for Operating Efficiency of PMMachines under Driving Cycle
Won Seok Song
383 Topology optimization of supercapacitors. Miguel Salazar deTroya
424 A topology optimisation in large-scale multi-particlesystems based on the scattering matrix method
Kei Matsushima
Robust design and reliability-based design optimization - IV
Day: Monday - June 14, 2021Time: 8:00 PM - 8:50 PM MDTRoom: A
41
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter26 An aerodynamic metamodeling and optimization
method using point cloud deep neural networkLi Chao
146 An Efficient Approach for Dynamic-Reliability-BasedDesign Optimization Using the Probability Density Evo-lution Method
Jiashu Yang
154 Active learning Kriging strategy for reliability-based androbust design optimization
Zeng Meng
486 L-moments driven Bayesian inference for risk analysiswith scarce samples in the presence of extremes
Deepan Jayaraman
560 Stochastic Crashworthiness Optimization Accountingfor Simulation Noise and Random Parameters
Seyed Saeed Ahmadis-oleymani
565 Topology Optimization of Lattice-like Materials andStructures Considering Uncertainty
Seyed Ardalan Nejat
Design optimization for optics and electromagnetics applications - IV
Day: Monday - June 14, 2021Time: 8:00 PM - 8:50 PM MDTRoom: B
ID Title Presenter279 Multi-material topology optimization of antenna sup-
porting structures considering electromagnetic perfor-mances
Naigang Hu
349 Multi-fidelity model based size optimization of electro-magnetic machine
Sungho Ahn
438 Electromagnetic-acoustic biphysical invisibility cloakvia CMA-ES based topology optimization
Garuda Fujii
Multi-scale topology optimization - IV
Day: Monday - June 14, 2021Time: 8:00 PM - 8:50 PM MDTRoom: C
42
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter436 Graded Porous Structures Design via a Multi-material
and Multi-porosity Topology Optimization ApproachZhi Zhao
475 Multi-scale topology optimization applying FFT-basedhomogenization approach
Masayoshi Matsui
485 Multiscale topology optimization of anisotropic compos-ite structures for compliant mechanism design
Jaewook Lee
493 Two-scale optimization and de-homogenization of spa-tially graded lattice structures
Liang Xu
512 Band Gap Design of Lattice Infilled Structures usingTopology Optimization and Experimental Material In-terpolation Model
Jianbin Du
Socializing - 3
Day: Monday - June 14, 2021Time: 9:00 PM - 10:00 PM MDTRoom: Lounge
Event OrganizerConference Talk Show 2 - Guests: Gengdong Cheng, YoonYoung Kim, Daniel Tortorelli
Kurt Maute
43
14th World Congress of Structural and Multidisciplinary Optimization
Tuesday - June 15, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Design of compliant mechanisms
Day: Tuesday - June 15, 2021Time: 7:00 AM - 7:50 AM MDTRoom: A
ID Title Presenter235 Topology optimization of flexures: a simple and versatile
formulationStijn Koppen
246 Design of flexoelectric structures via explicit topologyoptimization
Xiaoye Yan
385 Topology optimization designs of Multi-Input-Multi-Output hinge-free compliant mechanisms under buck-ling constraints
Jianhua Rong
427 Topology Optimization for Multi-layered MorphingWing Structure Using Distance Function
Hiroaki Tanaka
Reduced-order models in design optimization
Day: Tuesday - June 15, 2021Time: 7:00 AM - 7:50 AM MDTRoom: B
ID Title Presenter102 Multi-Fidelity Reduced-Order Modeling Applied to
Structural SimulationsDarshan Sarojini
148 Accelerating design optimization using reduced ordermodels
Youngsoo Choi
379 Spurious modes elimination in ROM-based topology op-timization of geometrically nonlinear structures
Lidan Zhang
384 Acceleration of shape optimization analysis using modelorder reduction by Karhunen-Loeve expansion
Shuichi Tango
578 Automatic reduced order model generation of multi-phisics problems using the hypercomplex finite elementmethod.
Manuel Garcia
44
14th World Congress of Structural and Multidisciplinary Optimization
Design optimization with applications to aerospace problems - I
Day: Tuesday - June 15, 2021Time: 7:00 AM - 7:50 AM MDTRoom: C
ID Title Presenter180 All-At-Once MDO formulation for coupled optimization
of launch vehicle design and its trajectory using a pseudospectral method
Jorge Valderrama
211 Multifidelity Learning for the Design of Re-Entry Cap-sules
Francesco Di Fiore
344 Multidisciplinary design optimization for compressorblisk under fatigue-creep reliability constraints
Hongxin Zhang
Machine learning for design optimization - I
Day: Tuesday - June 15, 2021Time: 7:00 AM - 7:50 AM MDTRoom: D
ID Title Presenter10 Machine learning based optimization of remodeling pa-
rameters for predicting bone formation in synthetic scaf-folds
Chi Wu
72 Cross-section optimization of steel frames using graph-based reinforcement learning
Kazuki Hayashi
136 A Local Approach of Deep Learning for AcceleratedTopology Optimizations with Broad Applicability
Niklas Hartrumpf
327 Automotive crashworthiness optimisation using machinelearning to emulate engineering expertise
Moritz Frenzel
374 Machine Learning Derived Graded Lattice Structures Jier Wang
Design optimization for advanced manufacturing - I
Day: Tuesday - June 15, 2021Time: 7:00 AM - 7:50 AM MDTRoom: E
45
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter82 Optimal Toolpath Design of Additive Manufactured
Composite Cylindrical StructuresLuis Felipe FernandezAyala
116 Imposing nozzle size restrictions in topology optimiza-tion for additive manufacturing
Eduardo Fernandez
123 Topology optimization in metal additive manufacturingusing an inherent strain based simulation
Martin Bihr
456 Minimizing intersecting features through topology opti-mization for Direct Metal Deposition
Vibhas Mishra
464 Topology Optimization with Generalized GeometricProjection: extension to Additive Layer Manufacturingself-supported designs
Gabriele Capasso
Raphael “Rafi” T. Haftka Memorial Session - I
Day: Tuesday - June 15, 2021Time: 8:00 AM - 8:50 AM MDTRoom: A
ID Title Presenter135 Inverse Method for Static Load Reconstruction with
Sensitivity Filtering and Optimal Sensor PlacementMari Hanekom
430 Flight Control Surface Optimization with Optimal RibPlacement
Vladimir Gantovnik
476 Simultaneous size, layout and topology optimization ofstiffened panels under stress and buckling constraints
Sheng Chu
569 Composite Optimization - From Ply-Tailoring Conceptto Stacking Sequence Details
Ming Zhou
Design optimization with applications to aerospace problems - II
Day: Tuesday - June 15, 2021Time: 8:00 AM - 8:50 AM MDTRoom: B
46
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter87 Uncertainty quantification for multidisciplinary launch
vehicle design using model order reduction and spectralmethods
Loic Brevault
100 An efficient hybrid method for aeroelastic optimizationof 3D-curved surfaces laminates
Daniel Milbrath DeLeon
177 Coupled topology and shape optimization of wings Lukas ChristianHøghøj
308 On the numerical accuracy of low- and high-order panelmethods in shape optimization
Cian Conlan-Smith
309 Thermal Simulation and Optimization of an Electro-Hydrostatic Actuator to reduce Component Tempera-tures
Simon Knecht
Topology optimization for fluids - I
Day: Tuesday - June 15, 2021Time: 8:00 AM - 8:50 AM MDTRoom: C
ID Title Presenter43 Design of structure subject to non-Newtonian fluid-
structure interaction loads using topology optimizationof binary structure
Shahin Ranjbarzadeh
250 Level set topology optimization for Fluid-Structure In-teractions
Andreas Neofytou
332 3D Topology Optimization of Spacers in a Reverse Os-mosis Channel
Sicheng Sun
355 Multi-shape optimization in two-dimensional Stokesflow
Tim Suchan
402 Improved flow and pressure field accuracy in topologyoptimization through volume averaging
Maarten Theulings
Machine learning for design optimization - II
Day: Tuesday - June 15, 2021Time: 8:00 AM - 8:50 AM MDTRoom: D
47
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter142 AI assisted optimization of highly non-linear systems on
hand of vehicle frontal crash studyJens Trilling
223 Generating high-resolution optimal topology using au-toencoder
Seungjun Lee
357 De-homogenization using Convolutional Neural Net-works
Ole Sigmund
377 Multiclass Blending and Data-Driven Topology Opti-mization for Functionally Graded Structures
Yu-Chin Chan
508 A novel shape generation framework via machine learn-ing and topology optimization
Nikolaos Kallioras
Design optimization for advanced manufacturing - II
Day: Tuesday - June 15, 2021Time: 8:00 AM - 8:50 AM MDTRoom: E
ID Title Presenter122 Topology and print orientation optimization for addi-
tively manufactured products subjected to fatigue con-straints
Erik Lund
124 Topology Optimization of supports with imperfectbonding in Additive Manufacturing
Matías Godoy
179 Optimization of support structures for reducing thermaldisplacements in SLA
Christiaan Mommeyer
365 Experimental Investigation of Topology-OptimizedBeams with Anisotropic Base Materials
Hajin Kim
549 Drainage filter for topology optimization of cleanableparts
Reinier Giele
Raphael “Rafi” T. Haftka Memorial Session - II
Day: Tuesday - June 15, 2021Time: 9:00 AM - 9:50 AM MDTRoom: A
48
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter539 Generalized Multifidelity Active Learning Framework
for Gaussian-Process-Based Reliability AnalysisAnirban Chaudhuri
580 The complex-step derivative approximation 20 yearslater
Joaquim Martins
Evolutionary and zero-order methods for structural optimization - I
Day: Tuesday - June 15, 2021Time: 9:00 AM - 9:50 AM MDTRoom: B
ID Title Presenter32 Stiffener layout optimization for three-dimensional box
structures with maximization of natural frequenciesTiannan Hu
103 Motion characteristics of biological propulsion systemsfor underwater vehicles in starting process
Xiaowen Shang
258 Maximum thickness control in heuristic based structuraloptimization
Wael Mars
304 A new method for faster identification of segmented fea-sible regions in constraint optimization problems
KoushyarKomeilizadeh
407 A FORTRAN formulation for efficient topology opti-mization of structures in ANSYS
Guillermo RealesGutiérrez
421 Bionic design and optimization of aircraft spoiler stiff-ened layout
Ruotong Jiao
Moving morphable component methods - I
Day: Tuesday - June 15, 2021Time: 9:00 AM - 9:50 AM MDTRoom: C
49
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter131 Explicit topology optimization considering transient
structural dynamic responses using the moving mor-phable component (MMC) approach
Jialin Li
221 Combined model-based stiffened plate structure topol-ogy optimization via MMC approach
Linyuan Li
367 Explicit Topology Optimization of Topological Insula-tors
Jiachen Luo
392 Implementing Bezier Curves and Commercial Solvers inthe Moving Morphable Components Framework
Thomas Shannon
490 Moving Stretchable Bars (MSB) method with chain con-straints for topology optimization of deployable struc-tures
Dongsheng Jia
566 Additive Manufacturing-Oriented Graded Lattice Struc-ture Design Based on MMC Method and Partition Co-ordinate Perturbation Technology
Xu Guo
Design optimization with applications to aerospace problems - III
Day: Tuesday - June 15, 2021Time: 9:00 AM - 9:50 AM MDTRoom: D
ID Title Presenter55 Efficient Fail-safe Topology Optimization using the Ge-
ometry Projection MethodHollis Smith
162 Topology optimization of compliant mechanisms for de-signing reliable Lunar surface hardware.
Dorota Budzyń
326 Efficient Aircraft Rib Design through Multi-scale Topol-ogy Optimisation
Edouard Duriez
358 Topology optimization of large-scale 3D morphing wingstructures
Peter Dørffler Lade-gaard Jensen
543 The topology-size integrated optimization design for anaircraft wing structure
Hai Huang
50
14th World Congress of Structural and Multidisciplinary Optimization
Design optimization for advanced manufacturing - III
Day: Tuesday - June 15, 2021Time: 9:00 AM - 9:50 AM MDTRoom: E
ID Title Presenter163 Dripping Effect and Overhang Constraint in Topology
Optimization for Additive ManufacturingAlain Garaigordobil
265 Concurrent shape optimization of the part and scan-ningpath for additive manufacturing
Mathilde Boissier
303 Topology optimization in OpenFOAM: how to definethe maximum inverse porosity to consider manufactur-ing constraint
Pablo Ignacio AlarcónSoto
459 Development of a coupled topology optimizationmethod for injection-molded short fiber-reinforcedpolymer-metal hybrid composites
Berenalp Enguerel
531 Topology Optimization under Constant Feature Thick-ness Constraint for Wire Based Additive Manufacturing
Julia Carroll
Socializing - 4
Day: Tuesday - June 15, 2021Time: 10:00 AM - 11:00 AM MDTRoom: Lounge
Event OrganizerIn Memoriam of Raphael “Rafi” T. Haftka Nam-Ho Kim
51
14th World Congress of Structural and Multidisciplinary Optimization
Tuesday - June 15, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Plenary - 2
Day: Tuesday - June 15, 2021Time: 6:00 PM - 6:50 PM MDTRoom: Auditorium
Title PresenterPlenary Lecture 2 - Autonomous Optimization and Controlof Energy Systems
Andrey Bernstein
Evolutionary and zero-order methods for structural optimization - II
Day: Tuesday - June 15, 2021Time: 7:00 PM - 7:50 PM MDTRoom: A
ID Title Presenter129 History of Evolutionary Structural Optimization (ESO)
and Bidirectional ESOGrant Steven
229 Topology Optimization of Cellular Structures with HCA Jiao Jia295 Auto Plot PATHFINDER : Can multi-purpose opti-
mization generate a plant layout comparable to a vet-eran engineer ?
Kenji Mori
352 Geometry Optimization of a Rubber Mount UsingCuckoo Search Algorithm Considering Hyperelasticityand Viscoelasticity
Chih-Hsing Liu
568 The hybrid cellular automaton with adaptive controllers Sajjad Raeisi
52
14th World Congress of Structural and Multidisciplinary Optimization
Topology optimization for fluids - II
Day: Tuesday - June 15, 2021Time: 7:00 PM - 7:50 PM MDTRoom: B
ID Title Presenter51 On the topology optimization of fluid-structure interac-
tion problems with significant shear stressAnderson S. C.Azevêdo
171 Topology optimization of fluid-structure interactionproblems with turbulence models
Renato Picelli
277 Topology optimization for Navier-Stokes flow under theprojected area constraint
Kozo Furuta
446 Structural optimization of transient trajectory of parti-cle
Gil Ho Yoon
552 A Hyperelasticity-Based Mesh Deformation Techniquefor Topology Optimization of Fluid-Structure Interac-tion Problems
Mohamed Abdel-hamid
Design optimization of heat exchangers and other thermo-fluid applications -III
Day: Tuesday - June 15, 2021Time: 7:00 PM - 7:50 PM MDTRoom: C
ID Title Presenter16 Intelligent Design Methods for Structure Layout Opti-
mization Based on Deep LearningQiyin Lin
255 Topology Optimization for Transient Heat Transfer con-sidering Size Effect of Microstructure in Porous Material
NaruethepSukulthanasorn
289 Conformal Topology Optimization of Heat Conduc-tion Problems on Manifolds using Dimension ReductionLevel-set Methods (DR-LSM)
Xiaoqiang Xu
472 A novel design method of heat sink with conjugate heattransfer by geometry modeling and shape optimization
Xiwei Tian
546 Multi-Scale and Multi-Physics Analysis,Approximation-Assisted Optimization, and Exper-imental Validation of Compact Heat Exchangersutilizing High-Performance, Non-Round Tubes
James Tancabel
53
14th World Congress of Structural and Multidisciplinary Optimization
Moving morphable component methods - II
Day: Tuesday - June 15, 2021Time: 8:00 PM - 8:50 PM MDTRoom: A
ID Title Presenter35 Fully adaptive isogeometric topology optimization using
MMC based on truncated hierarchical B-splinesAodi Yang
224 Explicit topology optimization via growth evolution ofmoving morphable component (MMC)
Tianchen Cui
239 Optimization design of stiffened shell structures basedon MMC method
Xudong Jiang
243 Explicit structural topology optimization using BEM-based MMV approach
Weisheng Zhang
275 Topology Optimization with B-Spline Offset Features Ying Zhou310 Topology Optimization of Armor Layer in Marine Flex-
ible Riser Based on Moving Morphable ComponentsLifu Wang
Topology optimization for fluids - III
Day: Tuesday - June 15, 2021Time: 8:00 PM - 8:50 PM MDTRoom: B
ID Title Presenter183 Topology optimization of stationary fluid-structure in-
teraction problems including large displacementsKamilla Silva
188 Topology optimization of turbulent fluid flow by usinginteger linear programming
Emilio Carlos NelliSilva
362 Topology optimization for surface flows Yongbo Deng387 Data-driven Multifidelity Topology Design Using Varia-
tional Autoencoder in Thermal-fluid ProblemsKentaro Yaji
393 Navier-Slip Boundary Effect on Flow Topology Opti-mization
Georg Pingen
54
14th World Congress of Structural and Multidisciplinary Optimization
Design optimization of heat exchangers and other thermo-fluid applications -IV
Day: Tuesday - June 15, 2021Time: 8:00 PM - 8:50 PM MDTRoom: C
ID Title Presenter364 Topology Optimization of Fischer Tropsch Reactors for
Synthetic Fuel ProductionJorge Luis BarreraCruz
391 Level-Set Topology Optimization of a Phase ChangeCooled Airfoil Leading Edge for High Speed Applica-tions
Nils Wunsch
440 Multi-objective design optimization of perforated plateto improve the flow distribution in the heat exchanger
Kohei Miyamoto
506 Topology Optimization Design of Guide Plates for ColdPlate Flow Channel
Sihao Qian
Socializing - 5
Day: Tuesday - June 15, 2021Time: 9:00 PM - 10:00 PM MDTRoom: Lounge
Event OrganizerCareer Development Workshop John Evans
55
14th World Congress of Structural and Multidisciplinary Optimization
Wednesday - June 16, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
ISSMO General Assembly
Day: Wednesday - June 16, 2021Time: 7:00 AM - 7:50 AM MDTRoom: Auditorium
Orgnanized by Professor Wei Chen, President, ISSMO
Isogeometric methods in design optimization
Day: Wednesday - June 16, 2021Time: 8:00 AM - 8:50 AM MDTRoom: A
ID Title Presenter34 Adaptive isogeometric topology optimization in trun-
cated hierarchical B-splines spaceXianda Xie
203 Multiresolution Isogeometric Shape and Topology Op-timization with Volumetric Subdivision Representationof Complex Geometry
Gang Xu
380 Topology Optimization using Hierarchically RefinedHigher Order B-Spline Meshes
Mathias Schmidt
515 Isogeometric shape design sensitivity analysis of hypere-lastic Cosserat rods with extensible directors in friction-less contact problems
Myung-Jin Choi
524 Isogeometric design and shape optimization of 3D beamsand lattice structures at large deformations
Oliver Weeger
Optimization of contact and interface problems
Day: Wednesday - June 16, 2021Time: 8:00 AM - 8:50 AM MDTRoom: B
56
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter15 Optimization design for uniform contact stress distribu-
tion in elastic contact problemsYicong Zhou
181 Internal contact modeling for topology optimization Gore Lukas Bluhm270 Nonlinear Shape Optimization of Machine Elements in
ContactFilip Sjövall
410 Many-component analysis and design optimization withcontact interface conditions
Keenan Doble
411 Phase Field Topology Optimization of Elasto-PlasticStructures in Contact
Andrzej Myliski
445 Topology optimization of elastic contact problems withmaximum contact pressure constraint
Jiajia Li
Design optimization accounting for material nonlinear behavior - I
Day: Wednesday - June 16, 2021Time: 8:00 AM - 8:50 AM MDTRoom: C
ID Title Presenter127 Conceptual Crashworthiness Sheet Sizing Claus B.W. Pedersen192 Topology optimization of thermo-hyperelastic structures
utilizing inverse motion based form findingQianqian Sui
276 Structural topology optimization for ductile failure andbuckling resistance
Jonathan Russ
297 A Modular XFEM Approach Used For Elastoplastic Ma-terials
Felix Wohlgemuth
Design optimization for civil enginering and architectural design - I
Day: Wednesday - June 16, 2021Time: 8:00 AM - 8:50 AM MDTRoom: D
57
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter96 Plate supports optimization using feature mapping ap-
proachYakov Zelickman
121 The efforts so far: Topology optimization in concreteconstruction
Nadine Stoiber
134 A heuristic two-stage optimization of the system build-ing gymnasiums according to the scale
Hayata Takahashi
156 Robust Design Optimization of Moment-Resisting SteelFrames using Displacement-Restraint Brace and OilDamper
Sumio Kishida
312 Topology optimization of a steel joint for temporaryspace frames using P-norm aggregated stress constraints
Daan Van Cauteren
Design of composite structures - I
Day: Wednesday - June 16, 2021Time: 8:00 AM - 8:50 AM MDTRoom: E
ID Title Presenter54 Simultaneous optimization of the rib-stiffener placement
and skin material properties of a stiffened compositespace launcher structure
Florent Savine
99 Challenges for dealing with composite winding profilesunder lateral crash loads using the Graph and Heuristicbased Topology Optimization
Dominik Schneider
213 A generalised isogeometric polar approach for optimis-ing variable stiffness composites: application to eigen-value buckling problems
Marco Montemurro
353 Topological Optimisation of Large Additively Manufac-tured Composite Structures with a Graded Lattice Core
Alex Moss
376 Application of Sandwich Composites to Skin Panel Op-timization of the CRM wing
Yasser Meddaikar
532 Topology optimization with anisotropic material prop-erties considering buckling
Federico Ferrari
58
14th World Congress of Structural and Multidisciplinary Optimization
Topology optimization for solid mechanics
Day: Wednesday - June 16, 2021Time: 9:00 AM - 9:50 AM MDTRoom: A
ID Title Presenter126 Coupled topology optimization of both structure and
bolt connectionsLalaina Rako-tondrainibe
314 Topology optimization for stiffness and stability withnonlinear geometry
Peter Dunning
331 Topology optimization for pressure loading problems un-der buckling constraints using the TOBS method
Eduardo Mendes
334 Towards intentional aesthetics in topology optimizationby applying the principle of unity-in-variety
Shannon Loos
336 Analytical relationships for defining minimum lengthscales in the robust topology optimization frameworkbased on uniform manufacturing uncertainties.
Denis Trillet
496 Topology optimization with wall thickness and devel-opability constraints for foldable, shape-changing struc-tures
Yuqing Zhou
Design optimization accounting for material nonlinear behavior - II
Day: Wednesday - June 16, 2021Time: 9:00 AM - 9:50 AM MDTRoom: B
ID Title Presenter20 Plastic Work Constrained Topology Optimization Mathias Wallin285 Conformal Topology Optimization of Multi-material
Ferromagnetic Soft ActuatorsJiawei Tian
299 Sensitivity analysis for elasto-plastic materials with anon-local damage regularisation
Fabian Guhr
317 Gradient based shape optimization of the X0-specimen Jan Liedmann319 An Interface-enriched Level Set-based Topology Opti-
mization for Tailoring Fracture ToughnessJian Zhang
59
14th World Congress of Structural and Multidisciplinary Optimization
Design optimization for civil enginering and architectural design - II
Day: Wednesday - June 16, 2021Time: 9:00 AM - 9:50 AM MDTRoom: C
ID Title Presenter24 Topology optimization of nonlinear viscous dampers for
energy-dissipating structures subjected to random seis-mic excitations
Cheng Su
311 Shape optimization method for bar/beam nodes of com-plex structures with approximate concepts
Jiayi Fu
346 Structural Optimisation of Diffusion Driven Degrada-tion Processes
Navina Waschinsky
401 Circular Arch Optimization by Numerical and Dimen-sionless Approaches
Amedeo Manuello
544 Application of structural design and topology optimiza-tion in architecture
Junho Chun
Design of composite structures - II
Day: Wednesday - June 16, 2021Time: 9:00 AM - 9:50 AM MDTRoom: D
ID Title Presenter236 Coupled optimization of topology and orientation of lo-
cally anisotropic materialsAbdelhak Touiti
305 Failure load maximisation of variable-stiffness compos-ites with mass and manufacturability constraints
Michele Iacopo Izzi
378 Optimization of fiber-reinforced bead patterns using anevolutionary algorithm
Patrick Haberkern
470 The Tsai-Wu failure index as an objective in compositestructural optimization
Sa-aadat Parker
529 Optimal design of VTOL -UAV using PLA reinforcedwith carbone fibres
Hao Yue
60
14th World Congress of Structural and Multidisciplinary Optimization
Novel topology optimization techniques - I
Day: Wednesday - June 16, 2021Time: 9:00 AM - 9:50 AM MDTRoom: E
ID Title Presenter98 A new approach to topological ligaments in structural
optimizationCharles Dapogny
113 A diversity metric based on Gaussian process model fordiverse and competitive design
Zheng Li
144 A new approach based on spectral graph theory to avoid-ing enclosed voids in topology optimization
Alberto Donoso
170 Influence of different modeling for outer contour and in-ner zones in topology optimization
Jan Holoch
Socializing - 6
Day: Wednesday - June 16, 2021Time: 10:00 AM - 11:00 AM MDTRoom: Lounge
Event OrganizerCareer Development Workshop John Evans
61
14th World Congress of Structural and Multidisciplinary Optimization
Wednesday - June 16, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Design of composite structures - III
Day: Wednesday - June 16, 2021Time: 6:00 PM - 6:50 PM MDTRoom: A
ID Title Presenter39 A Full-scale Topology Optimization Method for Fiber-
reinforced Composite Structures with Continuous FiberPaths
Hang Li
117 Material orientation optimization of laminated shellstructure for frequency response problem
Ryosuke Tsukihara
119 Stiffness-based concurrent design of fiber compositebased on the novel discrete-continuous material orien-tation optimization model
Haoqing Ding
186 Fiber Reinforced Additive Manufacturing: Implementa-tion in Optimization of Structural Components
Noah Ray
381 A heuristic method for practical FEA-based optimiza-tion of wind turbine blade core distributions
Austin Herrema
Novel topology optimization techniques - II
Day: Wednesday - June 16, 2021Time: 6:00 PM - 6:50 PM MDTRoom: B
62
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter101 A new method for integrated topology and packaging
optimizationStephen Roper
130 3D Manufacturable Design using Element-based Topol-ogy Optimization
Tuan Tran
139 Introducing Design Space-Independence in Beam Cross-Section Optimization
Chander Sen
225 The number of genus Constraint in 3D Structural Topol-ogy Optimization
Haitao Han
553 Revisiting element removal strategies in topology opti-mization and the role of Heaviside Projection in materialreintroduction
James Guest
Machine learning for design optimization - III
Day: Wednesday - June 16, 2021Time: 6:00 PM - 6:50 PM MDTRoom: C
ID Title Presenter71 Acceleration design for continuum topology optimiza-
tion Based on ICM method and data-drivenHongling Ye
89 Accelerated projected gradient method for complianceminimization problem
Akatsuki Nishioka
420 Towards accelerating topology optimization via machinelearning
Yi Xing
474 Iterative Sizing Optimization of Aircraft Wings UsingAnalytical Neural Networks
Masakazu Kobayashi
492 Dynamic Robotic Grasping Optimization Based OnDeep Q-Network
Jianhao Fang
Design optimization for advanced manufacturing - IV
Day: Wednesday - June 16, 2021Time: 6:00 PM - 6:50 PM MDTRoom: D
63
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter44 Space-time topology optimization using thermal regu-
larization for the fabrication sequenceWeiming Wang
83 PDE for the geometrical constraint of additive manufac-turing and its application to topology optimization
Takayuki Yamada
248 Concurrent Optimization of Building Orientation andInfill-Struts for Lattice Structures in Additive Manufac-turing
Chenyang Li
454 Topology Optimization of 3D Shell Coated Structureswith Graded Lattice Infill for Additive Manufacturing
Chang Liu
542 Topology Optimization for Design with Stress-dependent Material Properties
Justin Unger
Design of composite structures - IV
Day: Wednesday - June 16, 2021Time: 7:00 PM - 7:50 PM MDTRoom: A
ID Title Presenter19 Optimization of fiber orientation for composite lami-
nates based on artificial neural networksYanan Xu
184 A Topology Optimization approach for Design ofActively-cooled Vascular Composite
Reza Pejman
382 Multiobjective Stacking Sequence Optimization for Un-symmetrical Laminated Plate with Ply Drop-off underSeveral Empirical Constraints
Nozomu Kogiso
396 Design Of Fiber Path And Shape For Variable-stiffnessPanels Via Isogeometric Analysis
Yu Wang
Novel topology optimization techniques - III
Day: Wednesday - June 16, 2021Time: 7:00 PM - 7:50 PM MDTRoom: B
64
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter145 An ODE-govern Density Method with Level-set Descrip-
tion for Topology OptimizationYang Liu
262 Combined topology and spatial layout optimization formodularly constructed structures
Kristie Higginson
318 Modified SIMP model and a new continuation scheme Ping Yi460 Development of joint distance constraint for optimal
topology and optimal connection for multiple compo-nents
Jun Hwan Kim
558 Topology Optimization of Structures with Pro-grammable Snapping Instabilities
Tuo Zhao
Machine learning for design optimization - IV
Day: Wednesday - June 16, 2021Time: 7:00 PM - 7:50 PM MDTRoom: C
ID Title Presenter153 A data-driven self-adaptive SSI-PSO for the multi-scale
lightweight design of the CFRP automotive partsHan Li
159 Machine learning and graph embedding for truss topol-ogy optimization
Makoto Ohsaki
414 Universal Machine Learning for Topology Optimization:Multiscale Adaptive Online Learning on UnstructuredDiscretizations
Heng Chi
443 System reliability analysis using predictive system un-certainty
Seonghyeok Yang
564 Efficient shape update in topology optimization usingphysics-informed neural networks
Atsuto Hashimoto
Design optimization for advanced manufacturing - V
Day: Wednesday - June 16, 2021Time: 7:00 PM - 7:50 PM MDTRoom: D
65
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter81 Optimization-based Design for Additive Manufacturing Joshua Robbins214 Additive manufacturing topology optimization for buck-
ling with stiffness constraintJunji Kato
283 Topology Optimization Method with Overhang Con-straint for Selective Laser Melting
Yu Wang
433 Topology optimization subject to overhang angle con-straint with overhang length relaxation in AM
Kaiqing Zhang
562 Discrete Object Projection using Alternate Strategies toPrevent Phase Mixing
Chuan Luo
Design of composite structures - V
Day: Wednesday - June 16, 2021Time: 8:00 PM - 8:50 PM MDTRoom: A
ID Title Presenter23 Optimizing composite structures with curvilinear fibers
through a parametric divergence-free vector fieldmethod
Ye Tian
325 Concurrent Multi-phase and Multi-scale Design Opti-mization of Fiber-reinforced Variable Stiffness Compos-ite Structures
Zunyi Duan
338 Fiber-reinforced hyperelastic structures under large de-formations
X. Shelly Zhang
422 Comprehensive Optimization of Composite LaminateStacking Sequence and Shape with Two-Level Approxi-mation Method
Xinrong Liu
499 Optimizing Reinforcement Architecture of Plain-wovenTextile Composites for Tailored Stiffness and ThermalConductivity
Xiaoyi Zhou
Novel topology optimization techniques - IV
Day: Wednesday - June 16, 2021Time: 8:00 PM - 8:50 PM MDTRoom: B
66
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter222 Adaptive mesh refinement in density-based topology op-
timizationBoyan Lazarov
274 Generative Adversarial Networks for MultiphysicsTopology Design
Corey Parrott
281 Structural topology optimization using the body-fittedmesh
Zicheng Zhuang
435 IGA/FCM-based Adaptive Bubble Method for Simulta-neous Shape and Topology Optimization of Shell Struc-tures
Hualin Zhang
437 Structural complexity control in discrete variable con-tinuum topology optimization
Yuan Liang
541 Topology Optimization for thermal response time basedon linear eigenvalues
Jaeyub Hyun
Machine learning for design optimization - V
Day: Wednesday - June 16, 2021Time: 8:00 PM - 8:50 PM MDTRoom: C
ID Title Presenter267 Machine-learning Based Multi-fidelity Surrogate Model-
ing MethodsChao Zhang
366 An Innovative Design Method of Tire Tread Patternsby Deep Generative Model and Elitist Multi-ObjectiveSearch
Kazuki Imamura
448 Efficient tire pattern design using deep learning method-ology
Mingyu Lee
573 Generating airfoil with specific lift coefficients using con-ditional GAN and conditional VAE
Kazuo Yonekura
Design optimization for advanced manufacturing - VI
Day: Wednesday - June 16, 2021Time: 8:00 PM - 8:50 PM MDTRoom: D
67
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter155 Concurrent Topology Optimization of Shells and Self-
supporting Infills for additive manufacturingYufan Lu
351 Topology Optimization of Supports and Infills for Addi-tive Manufacturing with Process Simulations and Geo-metric Constraints
Mingdong Zhou
441 Multi-objective design optimization of process parame-ters in cold forging minimizing risk of material damage
Satoshi Kitayama
567 Topology Optimization for Fused Filament Fabricationwith Weak Deposition Bonds
Jackson Jewett
Socializing - 7
Day: Wednesday - June 16, 2021Time: 9:00 PM - 10:00 PM MDTRoom: Lounge
Event OrganizerRoundtable: Software design, development and managementpractices
Miguel Aguilo
68
14th World Congress of Structural and Multidisciplinary Optimization
Thursday - June 17, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Multi-objective topology optimization
Day: Thursday - June 17, 2021Time: 7:00 AM - 7:50 AM MDTRoom: A
ID Title Presenter36 Multi-Objective Optimization under Uncertainty of Pro-
cess Parameters in Additive ManufacturingBerkcan Kapusuzoglu
107 Exploration of Pareto Front for Multi-objective Topol-ogy Optimization Problem Incorporating an AdaptiveWeight and a Configuration-based Clustering Scheme
Seungjae Min
245 Multi-objective optimization of gear ratio and shiftingpatterns in multi-speed transmission electric vehicles us-ing transmission efficiency map
Junhyeong Jo
455 Thermo-mechanical coupling multiobjective periodictopology optimization of orthotropic structures basedon element-free Galerkin method.
Jianping Zhang
457 Six-objective optimization of electrothermal microactu-ators by means of Game Theory and Artificial ImmuneSystem
Adam Dugosz
575 Cooperative framework for many-objective crash opti-mization
Nidhi Nivesh Dom-maraju
Level set methods
Day: Thursday - June 17, 2021Time: 7:00 AM - 7:50 AM MDTRoom: B
69
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter172 An overview on the Interface-enriched Generalized Fi-
nite Element Method (IGFEM) for level set-based topol-ogy optimization
Alejandro Aragón
228 3D multi-material topology optimization with B-splineparameterized level set method
Junpeng Zhao
231 A Level set band method for level set-based topologyoptimization methods
Peng Wei
261 A CAD Aware Meshfree Topology Optimization Frame-work using Moments
Sandilya Kambampati
333 Explicit Level Set Topology Optimisation Method forMultidisciplinary Applications
Elliot Bontoft
419 Shape and Material Optimization of Problems with Dy-namically Evolving Interfaces
Kurt Maute
453 Level Set-based Topology Optimization for MaximizingLinear Buckling Load
Ishida Naoyuki
Design optimization of acoustic materials and devices - I
Day: Thursday - June 17, 2021Time: 7:00 AM - 7:50 AM MDTRoom: C
ID Title Presenter110 Transient vibroacoustic structural optimization for tai-
lored broadband characteristicsNiels Aage
150 Vibroacoustic shape optimization Peter Risby Andersen152 Topology optimization for two-layered acoustic metasur-
faces based on a two-scale homogenization methodYuki Noguchi
300 Research on topology optimization of acoustic-structural coupling system under explicit framework
Lei Xu
347 Topology Optimization of an Acoustic Diode? Seyedabbas Mousavi405 Shape sensitivity analysis for embedding methods with-
out domain transformations: application to acousticsMartin Berggren
70
14th World Congress of Structural and Multidisciplinary Optimization
Shape optimization - I
Day: Thursday - June 17, 2021Time: 7:00 AM - 7:50 AM MDTRoom: D
ID Title Presenter70 Shape optimization of auxetic bending-active gridshells
with non-uniform reentrant patternsYusuke Sakai
97 Eulerian Shape Optimization by Density Advection Ronald Bartz160 Optimal Strength Of Shaft-hub Assembly Niels Leergaard Ped-
ersen227 Multidisciplinary design optimization of the shape and
structure of Blended-wing-body Underwater GliderChongbo Fu
315 A shape optimization approach towards scalable algo-rithms allowing large deformations
Jose Alfonso PinzonEscobar
491 Quasi-Newton Relaxed Gradient Projection method inlarge constrained node-based shape optimization prob-lems
Ihar Antonau
Design optimization considering eigenfrequency and dynamics - I
Day: Thursday - June 17, 2021Time: 7:00 AM - 7:50 AM MDTRoom: E
71
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter29 Material Nonlinear Numerical Method of Dynamic
Topology Optimization on Equivalent Static LoadsMethod
Yongxin Li
41 Topology optimization of eigenvalue problems Anna Dalklint147 Nonlinear dynamic response optimization using Differ-
ence based Equivalent Static Loads combined with adap-tive time selection
Jens Triller
321 Damper placement optimization for truss structure vi-bration control
Ziqi Dai
510 Sensitivity analysis of a floating frame of reference ap-proach to flexible multibody systems: Application to thedesign optimization of a Tyrolean weir cleaning mecha-nism
Veit Gufler
533 Investigation of Combining Vertex Morphing and RigidBody Parametrization
David Schmölz
Design optimization with applications to automotive problems - I
Day: Thursday - June 17, 2021Time: 8:00 AM - 8:50 AM MDTRoom: A
ID Title Presenter74 About Tailor Rolled Blank parts in the multi-
disciplinary optimization process of a vehicleNiklas Klinke
75 Data-driven modeling of impact dynamics using spa-tiotemporal graph neural network
Ziming Wen
76 LEOPARD|topo nonlinear topology optimizationoverview of the implemented methods and models
Sierk Fiebig
363 A Convex Optimization Framework for Minimum LapTime Design and Control of Electric Race Cars
Olaf Borsboom
462 Optimal Structural Design of Vehicle Wheels throughMulti-Objective Optimization and Artificial Intelligence
Federico Ballo
72
14th World Congress of Structural and Multidisciplinary Optimization
Design of metamaterials - I
Day: Thursday - June 17, 2021Time: 8:00 AM - 8:50 AM MDTRoom: B
ID Title Presenter22 A Two-Variable Topology Optimization Approach for
Simultaneously Macro Layout and Local Grading of Pe-riodic Lattice Structures with Additive ManufacturingConstraints
Niclas Strömberg
216 Level-set Topology Optimization of Mechanolumines-cent Materials
Hesaneh Kazemi
272 Topology optimization of differentiable microstructures Xiaoya Zhai284 Microstructural topology optimization for patch-based
sandwich panel with desired in-plane thermal expansionand structural
Zihao Yang
337 Systematic design and investigation of 3D hierarchicalmaterials with enhanced buckling strength
Fengwen Wang
480 Topology Optimization of Graded Lattice Structureswith Self-Connected Multiple Microstructures
Shutian Liu
Surrogate modeling for design optimization - I
Day: Thursday - June 17, 2021Time: 8:00 AM - 8:50 AM MDTRoom: C
73
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter18 Efficient high-dimensional Kriging modeling via the ac-
tive subspace methodLiming Chen
42 Surrogate modeling for high-dimensional problems viaimage-driven manifold learning
Yu Li
69 Competitive variable-fidelity surrogate model via datamining
Kuo Tian
90 An Iso-volumetric Weighting Approach to Increase Effi-ciency of Stratified Samplings
Arne Kaps
256 Structural Optimization Using Bayesian Strategies withCompositional Kernel Search
Jens Winter
388 A Screening-based Gradient-enhanced Multi-fidelityGaussian Process model for Black-box Function Approx-imation
Quan Lin
Shape optimization - II
Day: Thursday - June 17, 2021Time: 8:00 AM - 8:50 AM MDTRoom: D
ID Title Presenter133 Shape optimization of SMA structures with respect to
fatigueXiaojun Gu
165 Nodal move limits for shape optimization of claddedgridshells
Willem Gythiel
168 Variational shape sensitivity analysis of an elastoplasticmaterial using IGA
Seyed Ali Ghasemi
193 A NURBS-based Shape Optimization Design of Struc-tures and Materials
Ahmad Najafi
240 Shape optimization of aero-engines turbine disks basedon mesh deformation method
Lei Huang
522 Multi-body and Multi-physics Shape Optimization Us-ing Vertex Morphing Method
Moustafa Alsayed Ah-mad
74
14th World Congress of Structural and Multidisciplinary Optimization
Design optimization considering eigenfrequency and dynamics - II
Day: Thursday - June 17, 2021Time: 8:00 AM - 8:50 AM MDTRoom: E
ID Title Presenter164 Weakly and fully coupled level set-based topology opti-
mization of flexible multibody systemsAli Azari Nejat
209 Topology Optimization for Improving Stability of a Ro-tating Thin Plate
Jialiang Sun
320 Sensitivity Analysis of Geometrically Exact Beam For-mulation in the Local Frame
Juliano Todesco
386 Topology optimization of vibrating thin-walled stiffenedplate with damping layer
Bin Niu
461 Topology optimization for large-scale MIMO frequencyresponse using reduced-order models
Arnoud Delissen
Stress-constrained topology optimization - I
Day: Thursday - June 17, 2021Time: 9:00 AM - 9:50 AM MDTRoom: A
ID Title Presenter30 A Maximum Rectifier Function for Stress-Constrained
Topology OptimizationJulián Norato
109 Stress-based topology optimization with precise and ex-plicit geometric boundaries
Emad Shakour
372 Topology optimization with stress constraints and time-varying body forces
Alexander Held
577 Stress constrained topology optimization Gunnar Granlund
Design optimization with applications to automotive problems - II
Day: Thursday - June 17, 2021Time: 9:00 AM - 9:50 AM MDTRoom: B
75
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter77 Using sensitivities in a heuristic nonlinear topology op-
timizationThilo Franke
105 Heuristics based on expert knowledge for improving thetopology of profile structures under axial crash loadingin the scheme of the Graph and Heuristic based Topol-ogy Optimization
Johannes Sperber
151 Optimization for Super Element Interior NVH Re-sponses
Shaobin Liu
415 Truck door light weight designs using topology optimiza-tion
Pierre Duysinx
504 Uncertainty management framework for automotivecrash simulations
Jonas Jehle
Shape optimization - III
Day: Thursday - June 17, 2021Time: 9:00 AM - 9:50 AM MDTRoom: C
ID Title Presenter166 Free vibration optimization of viscoelastic cantilever
beams and platesAntoni Joubert
241 Shape Optimization Method for Mutual Coupling Re-duction of the MIMO Antenna-array
Yi Tang
330 Shape optimization of the forged automotive componentwith consideration of the unstable behavior
Przemysaw Sebastjan
518 Node-Based Shape Optimization and Mechanical TestValidation of Complex Metal Components Manufac-tured by Laser Powder Bed Fusion.
Aditya Ghantasala
540 Status and potentials of free form shape optimization Kai-Uwe Bletzinger
Design optimization considering eigenfrequency and dynamics - III
Day: Thursday - June 17, 2021Time: 9:00 AM - 9:50 AM MDTRoom: D
76
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter178 Topology Optimization of Reduced Flexible Dynamical
Systems with Unilateral ContactsTimo Schmidt
215 Design of periodically stiffened panels for vibration con-trol using data-driven optimization
Meng-Xin He
263 Data-Driven Multiscale Design with Multiclass Mi-crostructures for Natural Frequency Maximization
Liwei Wang
481 Design optimization of FGM Materials Jüri Majak519 Topology optimization for the control of eigenfrequen-
cies with applications to MEMS and vibro-acousticsDaniele Giannini
Novel topology optimization techniques - V
Day: Thursday - June 17, 2021Time: 9:00 AM - 9:50 AM MDTRoom: E
ID Title Presenter112 Efficient approximate and exact reanalysis methods for
the 0-1 topology modificationXinyu Xie
114 Reduction of the multiple load optimum material designto the linear constrained problem
Tomasz Lewiński
157 Target reaction force design of continuum structures us-ing topology optimization
Christian Frier Hve-jsel
302 A Multi-Material Topology Optimization Method forthe Resolution of Interfaces by means of the CISAMR-Algorithm
Robert Renz
323 Investigating inexact iterative solvers in nested topologyoptimization
Oded Amir
329 Insights into numerical integration in feature mapping Fabian Wein
Socializing - 8
Day: Thursday - June 17, 2021Time: 10:00 AM - 11:00 AM MDTRoom: Lounge
77
14th World Congress of Structural and Multidisciplinary Optimization
Event OrganizerISSMO Women Networking 2 X. Shelly Zhang
78
14th World Congress of Structural and Multidisciplinary Optimization
Thursday - June 17, 2021
Evening Sessions – 6:00 - 10:00 PM MDT
Plenary - 4
Day: Thursday - June 17, 2021Time: 6:00 PM - 6:50 PM MDTRoom: Auditorium
Title PresenterSOTA Talk - Topology optimization: methodologies and ap-plications
Josephine Carstensen
SOTA Talk - From Surrogate Modeling to Physics-informedNeural Networks What Has Machine Learning Done for En-gineering Analysis and Design?
Felipe Viana
Stress-constrained topology optimization - II
Day: Thursday - June 17, 2021Time: 7:00 PM - 7:50 PM MDTRoom: A
ID Title Presenter28 Stress-constrained topology optimization based on IGA-
MFSE methodZhenzeng Lei
65 Stress-based structural optimization design under loadposition uncertainty
Minkyu Oh
198 Topology optimization design under stress and temper-ature constraints
Qingxuan Meng
238 Stress-constrained topology optimization with inhomo-geneous microstructure
Ruijie Zhao
412 Topology optimization with local stress constraints us-ing a unified failure criterion
Oliver Giraldo-Londoño
79
14th World Congress of Structural and Multidisciplinary Optimization
Design optimization of acoustic materials and devices - II
Day: Thursday - June 17, 2021Time: 7:00 PM - 7:50 PM MDTRoom: B
ID Title Presenter85 Acoustic hologram with phased arrays via topology op-
timizationWeibai Li
191 Customized inverse design of broadband acoustic meta-materials
Hao-Wen Dong
232 A robust topology optimisation for acoustic-elastodynamic coupled structures with broad workingbandwidths
Jincheng Qin
293 Multi-scale optimal design method of anisotropic acous-tic metamaterials based on topology optimization andhigh-frequency homogenization method
Shinji Nishiwaki
348 Topology optimization of full and directional band gapacoustic metamaterials
Xiaopeng Zhang
574 A level-set approach for multiple materials based onreaction-diffusion equation applied to inversion prob-lems in acoustic wave propagation
Paulo Bastos de Cas-tro
Design of metamaterials - II
Day: Thursday - June 17, 2021Time: 7:00 PM - 7:50 PM MDTRoom: C
80
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter104 Topology optimization using the representative volume
element method and machine learning for functionallygraded composite materials
Cheolwoong Kim
161 Concurrent shape optimization for multiscale structureusing Hź gradient method
Minami Fujioka
202 Topology Optimization of Monolayer Metamataerialsfor Total Mode Conversion of Elastic Waves
Won Uk Yoon
398 Investigation on numerical analysis and mechanicsexperiments of topology optimization of functionallygraded lattice structure
Long Liu
404 Optimal plate microstructures with ultimate stiffness forarbitrary multi-loadings
Yiqiang Wang
466 A heterogeneous lattice structure topology optimizationmethod considering the stress constraint
Shuzhi Xu
Design optimization for advanced manufacturing - VII
Day: Thursday - June 17, 2021Time: 7:00 PM - 7:50 PM MDTRoom: D
ID Title Presenter67 Topology Optimization of Self-supporting Infills for Ad-
ditive ManufacturingYichang Liu
195 Three-dimensional topology optimization consideringoverhang constraint in B-spline space
Che Wang
576 Variable lattice density optimization based on sequentialinherent strain method used in additive manufacturingprocess
Akihiro Takezawa
Surrogate modeling for design optimization - II
Day: Thursday - June 17, 2021Time: 8:00 PM - 8:50 PM MDTRoom: A
81
14th World Congress of Structural and Multidisciplinary Optimization
ID Title Presenter106 An adaptive PCE-HDMR approach for high dimensional
metamodelingJian Zhang
158 High-dimensional Global Optimization Method basedon Decomposition and Knowledge Transfer
Qineng Wang
226 A Surrogate-based Layout-shape coupling OptimizationStrategy for Blended-Wing-Body Underwater Gliders
Weixi Chen
280 A hierarchical surrogate assisted constrained particleswarm optimization method for expensive black-box op-timization problems
Kanghui Tao
313 A multi-model fusion based mode-pursuing samplingmethod for expensive black-box optimization problems
Ruobing Wang
497 Visual exploration of response space as a function ofsampling density in input DoE
Rashmi Rama Sushil
Design optimization considering eigenfrequency and dynamics - IV
Day: Thursday - June 17, 2021Time: 8:00 PM - 8:50 PM MDTRoom: B
ID Title Presenter63 Free-form optimization of vibration lures under real
loading conditions for maximizing their fundamental fre-quencies
Jin-Xing Shi
217 Shape preserving design for structures under harmonicresonance response
Yulei Wang
350 Shorten Transient State Duration of Forced Vibrationby Structural Optimization
Kun Yan
451 Research on overall design method and concept realiza-tion of mechanical structure
Tianjian Li
509 Beam System Optimization with Flexible MultibodyDynamics Considering Nonlinearity of Large Deforma-tion, Mechanization and Contact
Yang Cheng
550 An Assessment of Topology Optimization Algorithms onLarge-Scale Compliance and Eigenvalue Problems
Yicong Fu
82
14th World Congress of Structural and Multidisciplinary Optimization
Machine learning for design optimization - VI
Day: Thursday - June 17, 2021Time: 8:00 PM - 8:50 PM MDTRoom: C
ID Title Presenter294 CNN-driven Approximate Algorithm of Topology Opti-
misation Based on Initial Stress LearningJun Yan
395 Data-driven topology design: A possibility ofsensitivity-free structural optimization by deep genera-tive models
Shintaro Yamasaki
428 Designing Phononic Bandgap Metamaterials with aGaussian Mixture-Variational Autoencoder
Hongyi Xu
473 A mechanistic-based data-driven approach to acceleratestructural topology optimization through finite elementconvolutional neural network (FE-CNN)
Tianle Yue
Socializing - 9
Day: Thursday - June 17, 2021Time: 9:00 PM - 10:00 PM MDTRoom: Lounge
Event OrganizerRoundtable: Artificial Intelligence and Machine Learning Raissi Maziar, Sub-
hayan De
83
14th World Congress of Structural and Multidisciplinary Optimization
Friday - June 18, 2021
Morning Sessions – 7:00 - 11:00 AM MDT
Plenary - 5
Day: Friday - June 18, 2021Time: 7:00 AM - 7:50 AM MDTRoom: Auditorium
Title PresenterSOTA Talk - Digital transformation and optimization Yoo Jeong NohSOTA Talk - System analysis and design in uncertainty Mathieu Balesdent
Multi-material topology optimization
Day: Friday - June 18, 2021Time: 8:00 AM - 8:50 AM MDTRoom: A
ID Title Presenter341 Design of composite structures with programmable elas-
tic responses under finite deformationsWeichen Li
417 New concepts of lightweight gearbox rear covers madeof aluminum and plastic using multi-material topologyoptimization
Ioanna Koutla
434 Layout design of thin-walled structures with lattices andstiffeners using multi-material topology optimization
Yang Li
511 Cellular Automata Mimicking Bodies Collision Appliedto Multi-Material Topology Optimization
Katarzyna Tajs-Zielinska
534 Level-set Multi-material Topology Optimization withthe XFEM
Adam Christopherson
556 Multi-Material Topology Optimization for EmbodiedCarbon
Claire Holley
84
14th World Congress of Structural and Multidisciplinary Optimization
Software
Day: Friday - June 18, 2021Time: 8:00 AM - 8:50 AM MDTRoom: B
ID Title Presenter125 An Efficient 180-line Matlab code for Adaptive Bubble
Method (ABM) based topology optimizationDaoyuan Yu
206 TopOpt.jl: Truss and Continuum Topology Optimiza-tion, Interactive Visualization, Automatic Differentia-tion, and More
Yijiang Huang
339 A comparative study of educational codes on topologyoptimization
X. Shelly Zhang
458 10-Million-Voxels Interactive Topology Optimizationfrom Mobiles Devices
Tuan Nguyen
561 Stress-constrained topology optimization: A stressaggregation-free educational software
Glaucio Paulino
572 Enhanced synergy between topology optimization andadditive manufacturing with integrated end-to-end dig-ital innovation platform: Application to space compo-nents
Frédéric Duboeuf
Truss topology optimization - I
Day: Friday - June 18, 2021Time: 8:00 AM - 8:50 AM MDTRoom: C
ID Title Presenter62 Optimal design of grid systems for tall buildings using
lattice structuresJanos Logo
199 Concurrent topology and geometry optimization of trussstructures with global stability constraints
Alemseged Weldeye-sus
269 A new growth method for truss shape and topology op-timization
Tomasz Sokół
403 Truss structure topology optimization for maximumshakedown multiplier
Kai Li
520 Interactive layout optimization of long-span structuressubject to self-weight and multiple load-cases
Helen Fairclough
85
14th World Congress of Structural and Multidisciplinary Optimization
Topology optimization considering uncertainty - I
Day: Friday - June 18, 2021Time: 8:00 AM - 8:50 AM MDTRoom: D
ID Title Presenter49 Robust topology optimization when nominal and ex-
pected compliance are the sameJanos Logo
194 Worst-case design of plane frames using order statistics Wei Shen447 Modeling of geometric uncertainties in topology opti-
mization via the shift of design nodes.Jonghyun Kim
525 Incorporating uncertainties in Topology Optimization:A Stochastic Reduced Order Model approach
Alberto Torres
545 Topology optimization for fail-safe designs using movingmorphable components as a representation of damage
Hampus Hederberg
Optimization algorithms - I
Day: Friday - June 18, 2021Time: 8:00 AM - 8:50 AM MDTRoom: E
ID Title Presenter86 Significant input variable selection for design optimiza-
tion of piezoelectric energy harvesterHansu Kim
409 Computing multiple solutions of topology optimizationproblems
Ioannis Papadopoulos
423 Path Planning of Ship Collision Avoidance Using Im-proved A* Algorithm
Seo Chanhee
483 Exploring Quasi-Optimum Solution Assuming SideConstraints from Approximation Active Constraints
Hiroshi Unesaki
523 The continuous stochastic gradient method with appli-cations in topology optimization
Lukas Pflug
537 Hybrid Fireworks-Evolutionary Optimization Algo-rithm
Pawe Padzior
86
14th World Congress of Structural and Multidisciplinary Optimization
Topology optimization with manufacturing constraints
Day: Friday - June 18, 2021Time: 9:00 AM - 9:50 AM MDTRoom: A
ID Title Presenter80 Manufacturing Cost-Driven Topology Optimization of
Welded Steel Frame Structures based on the GeometryProjection Method
Hongye Gu
174 An Advection-Diffusion based Filter for Machinable De-signs in Topology Optimization
Erik Albert Träff
354 Parameterised Post-Processing of Topology Optimisa-tion Results
Maninder Sehmi
489 A prototype software for topology optimization consid-ering production constraints and multi-material designrules
Carlos Lopez Ro-driguez
517 Topology optimization for multi-axis machining Joshua Gasick526 Machining Constraints in Topology Optimization using
Projection MethodsHak Yong Lee
Truss topology optimization - II
Day: Friday - June 18, 2021Time: 9:00 AM - 9:50 AM MDTRoom: B
ID Title Presenter138 Combination of Structural Optimization Methods to De-
sign Optimal Truss StructuresKübra Ulukulu
175 Combined fail-safe and robust optimization of beamcross-section properties
Mathias Stolpe
400 Arch systems of minimum weight GrzegorzDzierzanowski
551 Optimal design of reinforced concrete slabs Matthew Gilbert554 Vaults of minimum weight and compliance - form finding
via 2D convex problemKarol Bołbotowski
87
14th World Congress of Structural and Multidisciplinary Optimization
Topology optimization considering uncertainty - II
Day: Friday - June 18, 2021Time: 9:00 AM - 9:50 AM MDTRoom: C
ID Title Presenter375 Stochastic topology optimization for superior robustness Johannes Neumann516 Topology optimization with worst-case material defects Jannis Greifenstein530 Topology optimization with uncertain Dirichlet data Carl-Johan Thore536 Microscale Uncertainty in Macroscale Topology Opti-
mizationSubhayan De
Optimization algorithms - II
Day: Friday - June 18, 2021Time: 9:00 AM - 9:50 AM MDTRoom: D
ID Title Presenter390 Exact Size and Shape Optimization of Additively Man-
ufactured Lightweight Planar Frame Structures withManufacturability Constraints and Modern Global Op-timization Methods
Oguz Toragay
397 Sequential separable conservative approximate integerprogramming algorithm for discrete variable structuretopology optimization
Kai Sun
452 On exact separabel models in structural optimization Michael Stingl469 Global optimality in minimum compliance topology op-
timization of frame and shell structuresMarek Tyburec
527 L-moments enabled modified Chebyshev bounds for Un-certainty Quantification
Naman Jain
528 Design Variable Scaling for the Vertex MorphingMethod
Armin Geiser
88
14th World Congress of Structural and Multidisciplinary Optimization
Socializing - 10
Day: Friday - June 18, 2021Time: 10:00 AM - 11:00 AM MDTRoom: Lounge
Event OrganizerDesign Optimization in Industry Julian Norato
89
14th World Congress of Structural and Multidisciplinary Optimization
Index of Abstract IDs and Presenters
90
Abstract IDs010, 45015, 57016, 53017, 33018, 74019, 64020, 59022, 73023, 66024, 60025, 41026, 42027, 39028, 79029, 72030, 75032, 49034, 56035, 54036, 69039, 62041, 72042, 74043, 47044, 64045, 39049, 86050, 35051, 53053, 41054, 58055, 50058, 39060, 33061, 33062, 85063, 82065, 79066, 39067, 81069, 74070, 71071, 63
072, 45074, 72075, 72076, 72077, 76080, 87081, 66082, 46083, 64085, 80086, 86087, 47089, 63090, 74092, 32093, 31094, 32095, 33096, 58097, 71098, 61099, 58100, 47101, 63102, 44103, 49104, 81105, 76106, 82107, 69109, 75110, 70111, 41112, 77113, 61114, 77115, 34116, 46117, 62118, 36119, 62121, 58122, 48
91
14th World Congress of Structural and Multidisciplinary Optimization
123, 46124, 48125, 85126, 59127, 57128, 34129, 52130, 63131, 50133, 74134, 58135, 46136, 45137, 41138, 87139, 63140, 33141, 36142, 48143, 31144, 61145, 65146, 42147, 72148, 44149, 40150, 70151, 76152, 70153, 65154, 42155, 68156, 58157, 77158, 82159, 65160, 71161, 81162, 50163, 51164, 75165, 74166, 76168, 74170, 61171, 53
172, 70173, 33174, 87175, 87176, 36177, 47178, 77179, 48180, 45181, 57182, 33183, 54184, 64185, 36186, 62187, 34188, 54189, 33190, 34191, 80192, 57193, 74194, 86195, 81198, 79199, 85201, 34202, 81203, 56206, 85207, 31208, 32209, 75211, 45212, 36213, 58214, 66215, 77216, 73217, 82221, 50222, 67223, 48224, 54225, 63226, 82
92
14th World Congress of Structural and Multidisciplinary Optimization
227, 71228, 70229, 52231, 70232, 80235, 44236, 60238, 79239, 54240, 74241, 76243, 54245, 69246, 44248, 64249, 36250, 47252, 34253, 32254, 31255, 53256, 74258, 49260, 32261, 70262, 65263, 77264, 38265, 51266, 34267, 67268, 33269, 85270, 57271, 35272, 73274, 67275, 54276, 57277, 53279, 42280, 82281, 67283, 66284, 73285, 59
288, 32289, 53290, 41291, 40293, 80294, 83295, 52296, 39297, 57298, 35299, 59300, 70302, 77303, 51304, 49305, 60308, 47309, 47310, 54311, 60312, 58313, 82314, 59315, 71316, 41317, 59318, 65319, 59320, 75321, 72323, 77324, 40325, 66326, 50327, 45329, 77330, 76331, 59332, 47333, 70334, 59336, 59337, 73338, 66339, 85341, 84
93
14th World Congress of Structural and Multidisciplinary Optimization
342, 39344, 45346, 60347, 70348, 80349, 42350, 82351, 68352, 52353, 58354, 87355, 47356, 40357, 48358, 50361, 40362, 54363, 72364, 55365, 48366, 67367, 50368, 39369, 39370, 32371, 35372, 75373, 35374, 45375, 88376, 58377, 48378, 60379, 44380, 56381, 62382, 64383, 41384, 44385, 44386, 75387, 54388, 74390, 88391, 55392, 50
393, 54395, 83396, 64397, 88398, 81400, 87401, 60402, 47403, 85404, 81405, 70407, 49408, 36409, 86410, 57411, 57412, 79414, 65415, 76417, 84418, 31419, 70420, 63421, 49422, 66423, 86424, 41426, 40427, 44428, 83429, 40430, 46431, 40432, 38433, 66434, 84435, 67436, 43437, 67438, 42439, 34440, 55441, 68442, 38443, 65444, 40
94
14th World Congress of Structural and Multidisciplinary Optimization
445, 57446, 53447, 86448, 67449, 34451, 82452, 88453, 70454, 64455, 69456, 46457, 69458, 85459, 51460, 65461, 75462, 72463, 35464, 46465, 36466, 81468, 33469, 88470, 60471, 38472, 53473, 83474, 63475, 43476, 46478, 34479, 31480, 73481, 77483, 86484, 40485, 43486, 42487, 38489, 87490, 50491, 71492, 63493, 43495, 35496, 59
497, 82498, 35499, 66504, 76506, 55508, 48509, 82510, 72511, 84512, 43515, 56516, 88517, 87518, 76519, 77520, 85521, 36522, 74523, 86524, 56525, 86526, 87527, 88528, 88529, 60530, 88531, 51532, 58533, 72534, 84535, 41536, 88537, 86539, 49540, 76541, 67542, 64543, 50544, 60545, 86546, 53548, 35549, 48550, 82551, 87552, 53
95
14th World Congress of Structural and Multidisciplinary Optimization
553, 63554, 87555, 36556, 84558, 65559, 38560, 42561, 85562, 66563, 39564, 65565, 42566, 50567, 68568, 52569, 46572, 85573, 67574, 80575, 69576, 81577, 75578, 44580, 49
96
PresentersAage, N., 70Abdelhamid, M., 53Aguilo, M., 39Ahmadisoleymani, S. S., 42Ahn, S., 42Al Ali, M., 39Alarcón Soto, P. I., 51Alexandersen, J., 33Allaire, G., 36Alsayed Ahmad, M., 74Amir, O., 77An, H., 32Andreasen, C., 33Antonau, I., 71Aragón, A., 70Araujo Cabarcas, J. C., 33Azari Nejat, A., 75Azevêdo, A. S. C., 53
Bai, Y., 41Ballo, F., 72Barbier, T., 31Barrera Cruz, J. L., 55Bartz, R., 71Bastos de Castro, P., 80Berggren, M., 70Bihr, M., 46Bletzinger, K., 76Bluhm, G. L., 57Bołbotowski, K., 87Boissier, M., 51Bokhari, A., 35Bontoft, E., 70Borsboom, O., 72Brevault, L., 47Budzyń, D., 50
Capasso, G., 46Carroll, J., 51Cesarano, A., 33Chan, Y., 48Chanhee, S., 86Chao, L., 42Chao, P., 35
Chaudhuri, A., 49Chen, L., 74Chen, W., 82Cheng, Y., 82Chi, H., 65Choi, H., 39Choi, M., 56Choi, Y., 44Christiansen, R., 35Christopherson, A., 84Chu, S., 46Chun, J., 60Cohen, D., 34Conlan-Smith, C., 47Cui, T., 54
Da, D., 40Dai, Z., 72Dalklint, A., 72Dapogny, C., 61De, S., 88Delissen, A., 75Deng, Y., 54Desai, J., 31Di Fiore, F., 45Dienemann, R., 33Ding, H., 62Do, B., 39Doble, K., 57Dommaraju, N. N., 69Dong, H., 80Donoso, A., 61Dou, S., 31Du, J., 43Duan, Z., 66Duboeuf, F., 85Dunning, P., 59Duriez, E., 50Duysinx, P., 76Dzierzanowski, G., 87Dugosz, A., 69de Aquino Castro, D., 34
Enguerel, B., 51
97
14th World Congress of Structural and Multidisciplinary Optimization
Fairclough, H., 85Fang, J., 63Fernandez Ayala, L. F., 46Fernandez, E., 46Ferrari, F., 58Ferrer, A., 36Fiebig, S., 72Franke, T., 76Frenzel, M., 45Fu, C., 71Fu, J., 60Fu, Y., 82Fujii, G., 42Fujioka, M., 81Furuta, K., 53
Gantovnik, V., 46Garaigordobil, A., 51Garcia, M., 44Garner, E., 34Gasick, J., 87Geiser, A., 88Ghantasala, A., 76Ghasemi, S. A., 74Giannini, D., 77Giele, R., 48Gilbert, M., 87Giraldo-Londoño, O., 79Godoy, M., 48Granlund, G., 75Greifenstein, J., 88Gu, H., 87Gu, X., 74Guest, J., 63Gufler, V., 72Guhr, F., 59Guo, X., 50Guzelbulut, C., 38Gythiel, W., 74
Haberkern, P., 60Han, H., 63Hanekom, M., 46Hartrumpf, N., 45Hashimoto, A., 65Hayashi, K., 45He, M., 77
Hederberg, H., 86Held, A., 75Herrema, A., 62Higginson, K., 65Holka, Q., 33Holley, C., 84Holoch, J., 61Hoshiba, H., 40Hou, Z., 40Hu, N., 42Hu, T., 49Huang, H., 50Huang, L., 74Huang, Y., 85Hvejsel, C. F., 77Hyun, J., 67Høghøj, L. C., 47Hübner, D., 36
Imamura, K., 67Isshiki, J., 32Izzi, M. I., 60
Jain, N., 88Jayaraman, D., 42Jehle, J., 76Jekel, C., 36Jensen, K., 33Jensen, P. D. L., 50Jewett, J., 68Jia, D., 50Jia, J., 52Jiang, X., 54Jiao, R., 49Jo, H., 32Jo, J., 69Jordan, E., 38Joubert, A., 76Jung, M., 33
Kallioras, N., 48Kambampati, S., 70Kania, R., 41Kanno, Y., 41Kaps, A., 74Kapusuzoglu, B., 69Kato, J., 66
98
14th World Congress of Structural and Multidisciplinary Optimization
Kazemi, H., 73Kim, C., 81Kim, H., 48, 86Kim, J., 86Kim, J. H., 65Kim, W., 40Kishida, S., 58Kitayama, S., 68Klinke, N., 72Knecht, S., 47Kobayashi, M., 63Kogiso, N., 64Komeilizadeh, K., 49Koppen, S., 44Kosta, M., 35Koutla, I., 84Kriegesmann, B., 35Kurahashi, T., 32
Lazarov, B., 67Lee, D., 40Lee, H. Y., 87Lee, J., 43Lee, M., 67Lee, S., 48Lei, Z., 79Lewiński, T., 77Li, C., 64Li, H., 33, 62, 65Li, J., 50, 57Li, K., 85Li, L., 50Li, Q., 38Li, T., 82Li, W., 80, 84Li, X., 39Li, Y., 72, 74, 84Li, Z., 61Liang, X., 36Liang, Y., 67Liedmann, J., 59Lin, Q., 53, 74Liu, C., 52, 64Liu, J., 39Liu, L., 81Liu, N. C., 38Liu, P., 34
Liu, S., 73, 76Liu, X., 66Liu, Y., 65, 81Logo, J., 85, 86Loos, S., 59Lopez Rodriguez, C., 87Lu, Y., 68Lund, E., 48Luo, C., 66Luo, J., 50
Majak, J., 77Manuello, A., 60Mars, W., 49Martins, J., 49Matsui, M., 43Matsushima, K., 41Maute, K., 70Meddaikar, Y., 58Mendes, E., 59Meng, Q., 79Meng, Z., 42Milbrath De Leon, D., 47Min, S., 69Mishra, V., 46Mitsumoto, Y., 38Miyamoto, K., 55Mommeyer, C., 48Montemurro, M., 58Mori, K., 52Moss, A., 58Mousavi, S., 70Myliski, A., 57
Nagar, D., 41Najafi, A., 74Najmon, J., 39Naoyuki, I., 70Nejat, S. A., 42Nelli Silva, E. C., 54Neofytou, A., 47Neumann, J., 88Nguyen, T., 85Nishioka, A., 63Nishiwaki, S., 80Niu, B., 75Noel, L., 36
99
14th World Congress of Structural and Multidisciplinary Optimization
Noguchi, Y., 70Norato, J., 75
Oh, M., 79Ohsaki, M., 65Ouyang, H., 32
Papadopoulos, I., 86Parker, S., 60Parrott, C., 67Paulino, G., 85Padzior, P., 86Pedersen, C. B., 57Pedersen, N. L., 71Pejman, R., 64Pflug, L., 86Picelli, R., 53Pingen, G., 54Pinzon Escobar, J. A., 71
Qian, S., 55Qin, J., 80
Radtke, L., 34Raeisi, S., 52Rakotondrainibe, L., 59Rama Sushil, R., 82Ramírez-Gil, F., 36Ranjbarzadeh, S., 47Ray, N., 62Reales Gutiérrez, G., 49Refai, K., 31Reitzinger, S., 35Renz, R., 77Risby Andersen, P., 70Robbins, J., 66Rogie, B., 36Rong, J., 44Roper, S., 63Russ, J., 57
Saito, A., 40Sakai, Y., 71Salazar de Troya, M., 41Sanders, E., 34Sarojini, D., 44Savine, F., 58Schmidt, M., 56
Schmidt, T., 77Schmölz, D., 72Schneider, D., 58Sebastjan, P., 76Sehmi, M., 87Sen, C., 63Seo, M., 39Shakour, E., 75Shang, X., 49Shannon, T., 50Shen, W., 86Shi, J., 82Shi, L., 40Sigmund, O., 48Silva, K., 54Singh, S., 31Sjövall, F., 57Smit, T., 34Smith, H., 50Sokół, T., 85Solano, D., 35Son, H., 40Song, W. S., 41Sperber, J., 76Steven, G., 52Stingl, M., 88Stoiber, N., 58Stolpe, M., 87Stroobants, J., 35Strömberg, N., 73Su, C., 60Su, X., 39Suchan, T., 47Sui, Q., 57Sukulthanasorn, N., 53Sun, J., 75Sun, K., 88Sun, S., 47Sun, Y., 40Swartz, K., 33
Tajs-Zielinska, K., 84Takahashi, H., 58Takezawa, A., 81Tanaka, H., 44Tancabel, J., 53Tang, Y., 76
100
14th World Congress of Structural and Multidisciplinary Optimization
Tango, S., 44Tao, K., 82Tauzowski, P., 31Theulings, M., 47Thomas, S., 40Thore, C., 88Tian, J., 59Tian, K., 74Tian, X., 53Tian, Y., 66Todesco, J., 75Toragay, O., 88Torres, A., 86Touiti, A., 60Tran, T., 63Triller, J., 72Trillet, D., 59Trilling, J., 48Träff, E. A., 87Tsukihara, R., 62Tyburec, M., 88
Ulukulu, K., 87Unesaki, H., 86Unger, J., 64
Valderrama, J., 45Van Cauteren, D., 58Venini, P., 32Vu, B. N., 34
Wadbro, E., 34Wallin, M., 59Wang, C., 81Wang, F., 73Wang, J., 45Wang, L., 54, 77Wang, Q., 82Wang, R., 82Wang, W., 64Wang, Y., 64, 66, 81, 82Waschinsky, N., 60Weeger, O., 56Wei, P., 70Wein, F., 77Weldeyesus, A., 85Wen, Z., 72
Weng, L., 41Wilke, D., 32Wilson, T., 38Winter, J., 74Wohlgemuth, F., 57Wu, C., 45Wunsch, N., 55
Xiao, X., 34Xie, X., 56, 77Xing, Y., 63Xiong, M., 36Xu, G., 56Xu, H., 83Xu, L., 43, 70Xu, S., 81Xu, X., 53Xu, Y., 64
Yaji, K., 54Yamada, T., 64Yamasaki, S., 83Yan, J., 83Yan, K., 82Yan, X., 44Yang, A., 54Yang, D., 41Yang, J., 42Yang, S., 65Yang, Z., 73Ye, H., 63Yi, P., 65Yonekura, K., 67Yoon, G. H., 53Yoon, W. U., 81Yu, D., 85Yue, H., 60Yue, T., 83
Zelickman, Y., 58Zhai, X., 73Zhang, C., 67Zhang, D., 35Zhang, H., 45, 67Zhang, J., 59, 69, 82Zhang, K., 66Zhang, L., 44
101
14th World Congress of Structural and Multidisciplinary Optimization
Zhang, W., 54Zhang, X., 80Zhang, X. S., 66, 85Zhao, J., 70Zhao, R., 79Zhao, T., 65Zhao, Z., 43Zhou, M., 46, 68Zhou, X., 66Zhou, Y., 54, 57, 59Zhou, Z., 36Zhuang, Z., 67
102