EMPLOYEES
1200
2016
2010
2005
2000
1995
1990
1985
1980
1975
1972
ESTABLISHMENT
1972
HEADQUARTERS
INCHEON, KOREA
We create the future success with our customers.
N from NEW, means that HANYOUNG NUX meets its customers with NEW TECHNOLOGY.
U from UNION, means UNION, CONVERGENCE & HARMONY of man and technology.
X reminds HANYOUNG NUX`s STABILITY and STRENGTH.
CERTIFICATIONS
GGGYY
Oceania
SSSouSououth Americaou
Euuuropurouropeuroopeope
ricarrrAfrrA
AsiaAsiaAsiaAsia
KOREAKKKKKK
North AmemNorth AmericaNorth Amemmerermm
R&D CENTER
1 1
HEADQUARTERS28, Gilpa-ro 71beon-gil, Nam-gu, Incheon, KoreaTEL. +82-32-876-4697
CHINA Subsidiary168 Jinlou Rd.Jiading District,Shanghai,ChinaTEL. +86-21-5954-7598
INDONESIA SubsidiaryJL. Jangari RT.033/RW.002 Desa Hegarmanah,Kec. Sukaluyu, Kab. Cianjur, Jawa Barat, 43284TEL. +62-21-8911-8120~3
We are increasing our reputation in the world
with our competitive products and upgraded customer service.
Start your new step with HANYOUNG NUX CO.,LTD. as a successful business partner for you.
VISION
2 World Leader in Control & Measurement
Temperature controller
� Multi-input (Thermocouple 12 types, RTD 2 types, DC voltage 2 types)
� Heating control / Cooling control / Simultaneous heating�cooling control
� Multi-output (Relay, SSR, Current output)
� Set value (SV) selection by contact input (DI)
� Retransmission output (4 - 20 ㎃)
� Fast sampling cycle 62.5 ㎳
� Installation depth 63 ㎜
� Heater break alarm
� Communication (RS485)
Suffix codeFeaturesModel Code Description
HX - Multi-input and output digital temperature controller
Dimension
2 48(W) × 96(H) ㎜
PID Auto-tuning
3 96(W) × 48(H) ㎜
4 48(W) × 48(H) ㎜
7 72(W) × 72(H) ㎜
9 96(W) × 96(H) ㎜
Control output0 Normal (Heating control)
1 Heating/cooling control (Simultaneous control)
HX 2/3/9 option0 None
1 RS485 communication + Heater break alarm (HBA)
HX7 option
0 None
1 RS485 communication + DI 2 contacts (SV2, SV3)
2 RS485 communication + Heater break alarm (HBA)
HX4 option
0 None
1 RS485 communication + DI 1 contact (SV2)
2 RS485 communication + Heater break alarm (HBA)
HX seriesHigh-speed
sampling
62.5ms
63 mm
Minimized depth Simultaneous heating•cooling control
AL1
Heater break alarm
Advanced RS485Communication
RS485
HIGH
TECH
3
Temperature controller AX series
� Multi-input (K, J, R, T and Pt100 Ω)
� Multi-output (Relay and SSR)
� High speed sampling cycle (100 ㎳)
� Installation depth : 63 ㎜
� Control loop break alarm (LBA)
Features
Minimized depth
63 mm
heating/cooling control Control loop break alarm(LBA)
AL1
Cost effective
High-speed sampling
100ms
Suffix codeModel Code Description
AX - Multi-input and output digital temperature controller
Dimension
2 48(W) × 96(H) ㎜
PID Auto-tuning
3 96(W) × 48(H) ㎜
4 48(W) × 48(H) ㎜
7 72(W) × 72(H) ㎜
9 96(W) × 96(H) ㎜
Control output
1 SSR + Relay1 + Relay2 Relay or SSR as control output(Selectable in operator setup mode)2 SSR + Relay1 + Relay2 + Relay3
1B SSR + Relay1 (Form c) + Relay2Only for AX2, 3, 7, 9
2B SSR + Relay1 (Form c) + Relay2 + Relay3
3 4 - 20 ㎃ + Relay2Current output as control output
4 4 - 20 ㎃ + Relay2 + Relay3
Power supply voltage A 100 - 240 V a.c 50 / 60 ㎐
※ Relay output operates as control output, alarm output and LBA output depend on the internal
parameter settings.
4 World Leader in Control & Measurement
� Counter / Timer
� Twin timer function
� Batch counter function
� Pre-scale setting up to 6 digits
� Max 10 kcps high-speed sampling
� Modbus communication support
� NPN/PNP selectable input
� Communication (RS485)
Features Suffix codeModel Code Description
GE - Digital counter/timer
Dimension
3 96(W) × 48(H) ㎜
4 48(W) × 48(H) ㎜
6 72(W) × 36(H) ㎜
7 72(W) × 72(H) ㎜
TypeP Pre-set counter
T Total counter (Only for indication)
Display digits4 4 digits (9999) ※GE3 and GE7 are not selectable
6 6 digits (999999)
Setting level(Excluding the total counter)
1 1st level setting
2 2nd level setting
Power supply voltageA 100 - 240 V a.c. 50 - 60 ㎐
D 24 - 60 V d.c./a.c. 50 - 60 ㎐
Digital Counter/Timer GE series
NPN/PNPselectable input
NPN
PNP
6 DigitsRS485Communication
Counter / TimerDual function
RS485
5
Graphic recorder GR series 12.1″
High-definition screen(GR2000)
5.7″
High-definition screen(GR200)
Remote monitoringby smartphone
Various and abundantsaving space
GR200� Up to 12 channels
� Dimension : 145 ㎜ (W) x 145 ㎜ (H) x 173.5 ㎜ (D)
� Multi input (RTD 2 types, Thermocouple 12 types, DC voltage 4 types)
� 80M-byte internal memory and SD/SDHC memory card support
� Remote monitoring by smartphone
GR2000� Up to 60 channels
� Dimension : 294(W) x 294(H) x 152.3(D) ㎜
� Multi input (RTD 2 types, Thermocouple 12 types, DC voltage 4 types)
� Various and abundant storage
Internal memory : 400 M-byte (Non-volatile) / External memory : USB memory, SD card
� Remote monitoring by smartphone
Features
5.7″12.1″
Model Code Description
GR200 - Graphic recorder (145 X 145 ㎜)
Input
channels
2 2 channels
4 4 channels
8 8 channels
12 12 channels
Input / Output
(DI / DO)
N None
1 DI 2 contacts+ DO 6 contacts
2 DI 4 contacts+ DO 12 contacts
Communication function 0 RS422, RS485
Model Code Description
GR2000 - Graphic recorder (294 X 294 ㎜)
Input
channels
06 6 channels
12 12 channels
18 18 channels
24 24 channels
30 30 channels
36 36 channels
42 42 channels
48 48 channels
54 54 channels
60 60 channels
I nput / Output
(DI / DO)
N None
A DI 5 contacts + DO 16 contacts
B DI 10 contacts + DO 32 contacts
Communication function
N None
A RS232, RS422, RS485
B RS232, RS422, RS485, Ethernet
Suffix code
6 World Leader in Control & Measurement
� Slim design
� Semi-permanent life expectancy
� Control mode selectable
Features
Model Code Description
TPR-2SL Slim type single phase thyristor power regulator
Rated
current
040 40 A
Fuse installed
055 55 A
070 70 A
090 90 A
110 110 A
130 130 A
160 160 A
200 200 A
Power supply
voltage
L 100 - 240 V a.c. (Low voltage)
H 380 - 440 V a.c. (High voltage)
OptionC RS485
F Fuse installed (Only 40, 55, 70 A)
※ The circuit needs 100 - 240 V a.c. voltage power separately.
Model Code Description
TPR-3SL Slim type 3 phase thyristor power regulator
Rated
current
040 40 A
055 55 A
070 70 A
090 90 A
130 130 A
160 160 A
Power supply
voltage
L 100 - 240 V a.c. (Low voltage)
H 380 - 440 V a.c. (High voltage)
Option- FUSE installed
N NO FUSE
※ Circuit and FAN need 100 - 240 V a.c. voltage power separately.
Model Code Description
TPR-3SL Slim type single phase x 3 thyristor power regulator
Rated
current
040 40 A
055 55 A
070 70 A
090 90 A
130 130 A
Power supply
voltage
L 100 - 240 V a.c. (Low voltage)
H 100 - 440 V a.c. (High voltage)
Option EP Each phase control
※ Circuit and FAN need 100 - 240 V a.c. voltage power separately.
Slim Type
Slim type CommunicationRS485 (TPR-3SL-EP)
Rated current
LEDOperation status
40 A ~ 1,000 A
RS485
Thyristor power regulator TPR series
Model Code Description
TPR-2M Ultra slim type single phase thyristor power regulator
TypeE Economical
S Advanced model
Rated current25 25 A
35 35 A
Power supply
voltage
L 100 - 240 V a.c.
H 100 - 440 V a.c. (※Only for advanced model)
Control input(Option)
C 4 - 20 ㎃ d.c.Economical : Basic packages
Advanced model : OptionV 1 - 5 V d.c.
O ON/OFF
※ For circuit input power, please connect 100 - 240 V a.c. separately. (Low voltage : 100 - 240 V a.c. / High voltage : 24 V d.c.)
Suffix codeModel Code Description
TPR-2SE - Cost-effective slim type single phase thyristor power regulator
Rated current
25 25 A
40 40 A
Power supply voltage H 100 - 440 V a.c.
7
� High current load control
� Input / output high insulation
� C-R snubber, zero cross function built-in
� Heat sink body type with better operability and safety
Features
Model Code Description
HSR-3SL - Slim type 3-phase solid state relay
Input control voltage D 4 - 32 V d.c.
Rated load
current
15 15 A
25 25 A
40 40 A
130 130 A
150 150 A
Rated load voltage 2 90 - 264 V a.c. (Low voltage)
4 90 - 480 V a.c. (High voltage)
Operation method(Switching Mode)
Z Zero cross switching
R Random switching
Option F Adding 60/80 ℃ heat sink overheating FAN alarm (Only 130 A, 150 A)
Model Code Description
HSR-2SL Slim type 2-phase solid state relay
Input control voltage D 4 - 32 V d.c.
Rated load current
25 25 A
40 40 A
Rated load voltage2 90 - 264 V a.c. (Low voltage)
4 90 - 480 V a.c. (High voltage)
Operation method(Switching mode)
Z Zero cross switching (Standard product)
R Random switching
Suffix codeModel Code Description
HSR-SL Slim type single-phase solid state relay
Input control voltage D 4 - 32 V d.c.
Contact- 1 contact
2C 2 contacts
Rated load current
15 15 A
25 25 A
40 40 A
Rated load voltage2 90 - 264 V a.c. (Low voltage)
4 90 - 480 V a.c. (High voltage)
Operation method(Switching Mode)
Z Zero cross switching (Standard product)
R Random switching
※ 2 contacts : Only available for 15 A option (HSR-SLD2C152Z, HSR-SLD2C154Z)
Ultra
Slim type
LEDOperation status Rated current
10 A ~ 150 A
Slim TypeSolid state relay HSR series
8 World Leader in Control & Measurement
Power supply DPS seriesDC OK
OUTPUT
Output ON Pilot lamp (LED)
Various outputs
15 W-240 W
Free Voltage
100 – 240 V
35 ㎜ DIN Rail Installation method
� 35 ㎜ DIN rail installation method
� Low output voltage fluctuation rate
� Reducing heat due to high efficiency
� Protection against overcurrent, overvoltage, and overheating
� Various outputs from 15 W to 240 W
� Output ON pilot lamp (LED)
� Input voltage: 100 – 240 V free voltage or automatic selection of 110/220V
Features Suffix codeModel Code Description
DPS- DPS Power supply (DIN rail type)
Power output
15 15 W
30 30 W
50 50 W
75 75 W
100 100 W
120 120 W
180 180 W
240 240 W (※ Only DPS-240S-12 : 216 W)
Number of output voltage S 1 output (Single output)
Output voltage classification
05 5 V d.c. (DPS-75S, DPS-100S, DPS-120S, DPS-180S, DPS-240S excluded)
12 12 V d.c. (DPS-180S excluded)
15 15 V d.c. (DPS-75S, DPS-100S, DPS-120S, DPS-180S, DPS-240S excluded)
24 24 V d.c.
48 48 V d.c. (DPS-15S, DPS-30S, DPS-50S excluded)
9
High visibility(Acrylic type)
Various inputMeasuring RMS
Measuring
RMSAV DA
DV DA
※ Please select the DC voltmeter because when measuring over 5 A d.c. current, users need to use
exclusive shunt.
Digital multi meter MP3 series
Suffix code
� Measuring RMS (Root mean square value)
� Various Input option
� Various output options
� Wide display range (4 digits -1999~ 9999)
� High visibility
Features
Model Code Description
MP3- Digital multi meter (Dimension : 96×48 ㎜)
Display digit 4 4 digits (9999)
Input type
AV AC (voltmeter
AA AC ammeter
DV DC voltmeter
DA DC ammeter
AVR AC voltmeter (RMS)
AAR AC ammeter (RMS)
Display digit
N Only for displaying
0 Relay (HI, GO, LO), measured value output (4 - 20 ㎃ DC)
1 Relay (HI, GO, LO)
2 NPN open collector (HI, GO, LO), BCD output (Dynamic)
3 PNP open collector (HI, GO, LO), BCD output (Dynamic)
4 NPN open collector (HI,GO,LO), measured value output (4-20 ㎃)
5 PNP open collector (HI,GO,LO), measured value output (4-20 ㎃)
6 NPN open collector (HI, GO, LO), serial output
7 PNP open collector (HI, GO, LO), serial output
8 NPN open collector (HI, GO, LO), communication (RS485)
9 PNP open collector (HI, GO, LO), communication (RS485)
10 BCD output (Static)
11 Relay (HI, GO, LO), RS485 output
Front panel typeA Front acrylic type
B Front plane type
Power supply voltageNone (100 - 240 V a.c. 50 - 60 ㎐)
C 24 V d.c. (Front division B, only applied with the name plate attached type)
Acrylic type
Plane type
10 World Leader in Control & Measurement
Different color for type
NPN 2WirePNP
Wide range ofpower supply voltage
5-35 V d.c.3 types of
cable structure
Cable
Connector
Relay connector
Excellent objectdetection
Proximity sensor UP/CUP series
Round type
Flat type
Square type
11
Suffix code
� Exclusive IC for C-MOS
� Wide range of power supply voltage (5 - 35 V d.c. : DC 3wire type, 2wire type)
� Products distinguishable by different colors (3wire type NPN/PNP, 2wire type NO/NC)
� AC type power supply voltage (Capacitive type : 20 - 240 V a.c.)
� 3 types of cable structure (Cable type, relay connector type, connector type)
Features
Model Code Description
CUP- - Capacitive type proximity sensor
Sensing area size18 M18
30 M30
Structure typeR Round type (Brass chrome plating case)
RP Round type (Plastic case)
Sensing distance8 8 ㎜ (Only with CUP-18□-8)
15 15 ㎜ (Only with CUP-30□-15)
Power and output type
N DC NPN output
P DC PNP output
F AC/DC 2 wire type (Dual usage) (No polarity)
Output stateA Normal open (NO)
C Normal close (NC)
Connection structure- No indication (Cable type)
CR Relay connector type
Capacitive type
Model Code Description
UP 25 F- 8 Inductive type proximity sensor
Sensing area size 25 Please refer to the dimension (25 x 49 x 10 ㎜)
Structure type F Flat type
Sensing distance 8 8 ㎜
Power and output type
N DC NPN output
P DC PNP output
A AC 2wire type
T DC 2wire type (Polarity)
U DC 2wire type (No polarity)
Output stateA Normal open (NO)
C Normal close (NC)
Connection structure- No indication (Cable type)
CR Relay connector
Flat type
Model Code Description
UP - Inductive type proximity sensor
Sensing
area size
8 M8
12 M12
18 M18
30 M30
Structure type
RM Round type shield
RD Round type non shield
RLM Long round type shield (M8 and M12 are excluded)
RLD Long round type Non shield (M8 and M12 are excluded)
Sensing distance * Please refer to the sensing distance of each specification (unit : ㎜)
Power and output type
N DC NPN output
P DC PNP output
A AC 2wire type
T DC 2wire type (Polarity)
U DC 2wire type (No polarity) ※ M8 is excluded
Output stateA Normal open (NO)
C Normal close (NC)
Connection structure
- No indication (Cable type)
CR Relay connector type
C Connector type
Round type
Model Code Description
UP S- Inductive type proximity sensor
Sensing
area size
8 8 x 8 ㎜
12 12 x 12 ㎜
18 18 x 18 ㎜
25 25 x 25 ㎜
30 30 x 30 ㎜
40 40 x 40 ㎜
Structure type S Square type
Sensing distance
2 2 ㎜ (Only with UP18S-2)
4 4 ㎜ (Only with UP18S-4)
5 5 ㎜ (Only with UP18S-5, UP25S-5)
8 8 ㎜ (Only with UP18S-8, UP25S-8)
10 10 ㎜ (Only with UP30S-10)
12 12 ㎜ (Only with UP25S-12)
15 15 ㎜ (Only with UP30S-15)
20 20 ㎜ (Only with UP40S-20)
Power and output type
N DC NPN output
P DC PNP output
A AC 2wire type (UP18S is excluded)
T DC 2wire type (Polarity)
U DC 2wire type (No polarity)
Output stateA Normal open (NO)
C Normal close (NC)
Sensing direction- No indication (Detect Front side)
U Detect upper side (Only available with the square type UP18S)
Connection structure- No indication (Cable type)
CR Relay connector type
Square type
12 World Leader in Control & Measurement
� Wide power voltage
� Simple installation structure
� Various output specifications
Features
Table of contents
Model Control output Power supply voltage Pulse/1revolution
HE20B
N5 - 12 V d.c. 100, 200, 360
(3 types)O
L 5 V d.c.
HE30B
T5 - 12 V d.c.
12 - 24 V d.c.100, 200, 360, 500, 1000, 1024
(6 types)
O
N
L 5 V d.c.
HE40B
T5 - 12 V d.c.
12 - 24 V d.c. *1, *2, *5, 10, *12, 15, 20, 25, 30, 40,
45, 50, 60, 75, 100, 120, 125, 150,
192, 200, 240, 250, 256, 300, 360,
400, 500, 512, 600, 800, 1000, 1024,
1200, 1500, 1800, 2000, 2048, 2500
(38 type)
O
N
L 5/12/24 V d.c.
HE50B
T5 - 12 V d.c.
12 - 24 V d.c.O
N
L 5/12/24 V d.c.
HE68B L 5/12/24 V d.c. 1024
Shaft encoder
Model Control output Power supply voltage Pulse/1revolution
HE20HB
N5 - 12 V d.c. 100, 200, 360
(3 types)O
L 5 V d.c.
HE30HB
T5 - 12 V d.c.
12 - 24 V d.c.100, 200, 360, 500, 1000, 1024
(6 types)
O
N
L 5 V d.c.
HE40HB
T5 - 12 V d.c.
12 - 24 V d.c.
*1, *2, *5, 10, *12, 15, 20, 25, 30, 40, 45, 50, 60,
75, 100, 120, 125, 150, 192, 200, 240, 250, 256,
300, 360, 400, 500, 512, 600, 800, 1000, 1024,
1200, 1500, 1800, 2000, 2048, 2500 (38 types)
O
N
L 5/12/24 V d.c.
Blind shaft encoder
Model Control output Power supply voltage Pulse/1revolution
PSC
N5 - 12 V d.c.
12 - 24 V d.c.
1 m, 1 cm, 1 mm,
1 YARD, 0.1 YARD, 0.01 YARDO
T
Wheel type encoder
Model Control output Power supply voltage Pulse/1revolution
HE40H
T5 - 12 V d.c.
12 - 24 V d.c.
*1, *2, *5, 10, *12, 15, 20, 25, 30, 40, 45, 50, 60, 75,
100, 120, 125, 150, 192, 200, 240, 250, 256, 300,
360, 400, 500, 512, 600, 800, 1000, 1024, 1200,
1500, 1800, 2000, 2048, 2500 (38 types)
O
N
L 5 V d.c.
HE60H
T5 - 12 V d.c.
12 - 24 V d.c.500, 600, 720, 800, 1000, 1024,
1200, 2000, 2048, 2500 (10 types)
O
N
L 5 V d.c.
Hollow shaft encoder
Features
Shaft Hollow shaft Blind shaft Wheel type
Rotary encoder HE series
13
� Snap-action contact unit
� Bright and durable due to LED light
� Aluminum guard / Plastic guard
� Assembling type (Actuator and contact part)
FeaturesAluminum guard Plastic guard
Flush (Ø30) MR - A Flush (Ø25) MR - N Extended (Ø22) MR - R Flush (Ø25) MR - K Extended (Ø22) MR - T
Actuator installation example in panel
Assembling typeLED light
LEDAluminum /
Plastic guard
Aluminum&
Plastic
Excellent visibility
Excellent touch operation
Control switch MR series
Installation hole
Ø22
Ø25
Ø30
14 World Leader in Control & Measurement
� Convenient internal working space for wiring
� Solid die casting case and 2 circuits double micro switch built in
� High mechanical intensity with the heat resistance, oil proof and dust protection structure
� Various actuators (8 types) for wide application
� Check the operation state outside by attaching the operation indicator
Suffix codeFeaturesModel Code Description
HY-M90 Limit switch (No operation indicator)
HY-LM90 Limit switch (Operation indicator type)
Actuator(Operation part)
2 Roller plunger type
3 Ball plunger type
4 Roller adjustable lever type
7 Adjustable rod wire type
8 Roller lever type
8L Fork roller lever
8R Ø50 roller lever type
9 Coil spring type
Operation indicatorclassification(HY-LM90 )
- No operation indicator
A AC indicator attachment type
D DC indicator attachment type
Convenientinternal wiring
Heat resistanceOperation indicator
Limit switch HY-M900
HY-LM900
Operation indicator type
HY-LM900 series
15
Specification
� Accurate operation and long life expectancy due to the snap action and strong chemical resistance case (phenolic resin)
� Excellent repetitive accuracy and 10 A opening / closing capacity
� Standard type, hole distance of installation cutout dimension : 25.4 ㎜, fix with M4 bolt
� 9 types of actuators for wide usages
� Terminal protective cover (Optional)
FeaturesContact structure M4-5.5 screw tightening, 1c contact
Contact material AgCdO
Protective structure Standard type
Rated current (le) 10 A 250 V a.c.
Dielectric strength 2,000 V a.c. 50/60 ㎐ for 1min (Between the terminal and non-recharging metal part)
Insulation resistance Min 100 ㏁ (500 V d.c. insulated ohmmeter)
Contact resistance Max 50 ㏁ (Default value)
Rated voltage (Ue) 250 V a.c.
Vibration Double amplitude 1.5 ㎜, frequency 10 ~ 55 ㎐, continuously 2 hour
Shock 100 ㎨ (Durability), 50 ㎨ (Malfunction)
Allowable operation speed 0.1 ㎧ ~ 1 ㎧
Life expectancyMechanical Min 1 million times (Less than open/close frequency 120 times/min)
Electrical Min 300 thousand times (Less than open/close frequency 20 times/min)
Ambient temperature -10 ~ 80 ℃
Ambient humidity 25 ~ 95 % RH
Weight Approx. 800g (10 EA / BOX)
10 A opening
10AAccurate operation
Micro switch HY-700 series
Terminal protective cover
MS-10
16 World Leader in Control & Measurement6 World Leader in Control & Measurement
Base unit suffix code
Model Code Description
STE060- STE060 Sign tower base unit
Classification B Base unit
FunctionA Lighting only
F Lighting, Flashing, Buzzer (External signal)
Power supply voltageD51 24 V d.c.
A11 100 - 240 V a.c. (50- 60 ㎐)
LED unit suffix code
Model Code Description
STE060- STE060 Sign tower LED unit
Classification L LED unit
Colors
R Red unit
Y Yellow unit
G Green unit
B Blue unit
W White unit
Suffix codeModel Code Description
STE060- Ø60 LED Light sign tower
FunctionA Lighting only
F Lighting, Flashing, Buzzer (External signal)
Power supply
voltage
D51 24 V d.c.
A11 100-240 V a.c. 50-60 ㎐
Stacking modules
1 1 stack (Red)
2 2 stacks (Red, Green)
3 3 stacks (Red, Yellow, Green)
4 4 stacks (Red, yellow, Green, Blue)
5 5 stacks (Red, Yellow, Green, Blue, White)
Supporter selection
L L type supporter (Standard type)
E Elbow type supporter (EPM-18) (Additional charge)
M Plastic supporter (MP-60)
S Plastic supporter (ST-011)
� IP65 protective structure (Buzzer IP54)
� Long-life product with high brightness of LED
� Simple structure from 1 stack to 5 stacks
� Various mounting supporters
� Easy to change the colors with the module type
Features
IP65
IP65 protectivestructure
LEDHigh brightnessModule type
LED Sign tower STE060 series
17
Continuous rotation light
Continuous rotation lightand buzzer
IP54 protection
IP54
Incandescent lampindicator
Turn light T series
� Ø84 Continuos light, rotation and buzzer
� Incandescent lamp indicator (Socket type)
� Various supporter mounting types (TR type, TX type)
� Cost effective, simple installation structure
� Protective cap with solid poly-carbonate material
� Rotational structure with the excellent abrasion resistive acetal gear
� IP54 protection
Features Suffix codeModel Code Description
Dimensionand
function
- Turn light (Ø 84)
TR Round type cap supporter attaching installation
Continuous rotation lightTX Rectangular type cap supporter attaching installation
TF Rectangular type cap direct installation
TP Round type cap direct installation
TFB Rectangular type cap direct installationContinuous rotation light and buzzer
TPB Round type cap direct installation
Power supply voltage
12 12 V d.c.
24 24 V d.c.
012 110/220 V a.c., 50 / 60 ㎐
Cap color
R Red
Y Yellow
G Green
B Blue