PAC WORLD AFRICA CONFERENCE 201330 July - 2 August, 2013

Cape Town, South Africa

PROTECTION, AUTOMATION & CONTROL WORLD AFRICA CONFERENCE 2013

Cape Peninsula University of Technology

Cape Town, South Africa

PROTECTION, AUTOMATION & CONTROL WORLD AFRICA CONFERENCE 2013

Welcome

PACWAC2013

Tuesday, July 30 2013

Cape Peninsula University of Technology (CPUT) Auditorium

13:30 – 17:00 Tutorial: Impact of IEC 61850 Ed. 2 on protection, automation and control systems

Dr. Alexander Apostolov, PAC World, USA

Substation to Substation communications based on IEC 61850

Engineering of protection, automation and control systems

Testing of protection, automation and control systems

12:00 – 17:00 Conference registration

Cape Peninsula University of Technology Auditorium - Exhibition Area

17:30 – 20:00 Welcome Reception

Wednesday, 31 July 2013

8.30 Conference opening

8:30 – 10:10 Morning Session S1.1: Chair: Raynitchka Tzoneva (CPUT, South Africa)

8:30 – 8:55 Using simulation tools for developing protection setting guidelines, Anura Perera, Transmission System

Operator, Eskom, South Africa

8:55 – 9:20 Logical substation security and it's benefits, Doron Kowensky, Siemens, South Africa

9:20 – 9:45 A South African utilities experience with IEC61850, Marlini Sukhnandan, Eskom, South Africa

9:45 – 10:10 The role of smart grid technologies on demand response in a power system with embedded wind power

generation, Sagar Dayabhai, Dr. John van Coller, Consolidated Power Projects (CONCO) / University of the

Witwatersrand (Wits), South Africa

10:10 – 10:40 Coffee break at the CPUT Auditorium - Exhibition Area

10:40 – 12:20 Morning Session S1.2: Chair: Raynitchka Tzoneva (CPUT, South Africa)

10:40 – 11:05 Lessons learned from an interruption of supply due to multiple protection failures, Malcolm Govender,

Eskom Transmission, South Africa

11:05 – 11:30 Line impedance measurements – motivation, purposes and benefits, Rainer Luxenburger, OMICRON

electronics, Germany, Dr. Wernich de Villiers,

OMICRON electronics, Austria

11:30 – 11:55 Real-time thermal rating for improved network utilization, Graeme Lloyd, Chang An, Ricardo Bouchet,

Sharaf Hosseini, Li Zou, Alstom Grid, UK

11:55 – 12:20 Commissioning and verification tool for injection based 100% stator/rotor earth fault protection, Stefan

Roxenborg , Tord Bengtsson, Stefan Thorburn, Patrick Cost, ABB, Sweden

12:20 – 13:30 Lunch break at the CPUT Auditorium - Exhibition Area

13:30 – 15:10 Afternoon Session S2.1:

13:30 – 15:10 Afternoon Session S2.1: Chair: Bruce Rigby (etalumiSe, South Africa)

13:30 – 13:55 ESKOM transmission system and protection statistical performance evaluation, Paul Keller, ESKOM

Transmission, South Africa

13:55 – 14:20 IEC 61850 based smart substation applications in China, Wang Hao, Luo Wei, NR Electric, China

14:20 – 14:45 Impact of transmission lines’ mutual coupling on impedance relay measurements, K Nofuya, A Bartylak,

Eskom Transmission, AA Yusuff, JL Munda, Tshwane University of Technology, South Africa

14:45 – 15:10 IEC 61850 GOOSE Performance Evaluation, Azeem Makadam, South Africa

15:10 – 15:40 Coffee break at the CPUT Auditorium - Exhibition Area

15:40 - 17:20 Afternoon Session S2.2: Chair: Bruce Rigby (etalumiSe, South Africa)

15:40 – 16:05 Telecontrol and solar power solution for motorized isolators for enhanced network fault isolation, Angus Kerr,

Eskom, South Africa

16:05 – 16:30 Multiple current Injection on bus-zone protection panels – a novel approach, D. Marshall, Megger, UK, Joe

Fischer, Eskom, M. Pitzer, South Africa

16:30 – 16:55 A revised MV feeder protection philosophy for Eskom Distribution South Africa, Martin Slabbert, Eskom

Distribution, Stuart van Zyl, Eskom PTM & C, Dr. Raj Naidoo, University of Pretoria, South Africa

16:55 – 17:20 Review of developments in substation automation networks, Peter Diamandis, South Africa

19:30 Conference Gala Dinner at the Gold Restaurant

Thursday, 1 August 2013

Cape Peninsula University of Technology (CPUT) Auditorium

8:30 - 10:10 Morning Session S3.1: Chair: Alexander Apostolov (PAC World, USA)

8:30 – 8:55 Performance of IEC61850-9-2LE in digital substation- Denmark, Europe, Neha Pavaiya, Philip Newman, Mikael

Ø. Møller-Jensen, Peter Diemer, Mohamed Boucherit, Paul Ferret, Simon Richards, Denmark

8:55 – 9:20 Analysis tools for protection, automation and control applications in electric power systems, Adam Bartylak,

ESKOM, System Operator, South Africa

9:20 – 9:45 Evaluation of distribution automation solutions – Impact on system availability in distribution networks,

Oliver Schroedel, Robert Rosenberger, Siemens, Germany

9:45 – 10:10 The demands and implications of IT and OT collaboration, Mohamed Moussamir, David Dolezilek, and Hennie

Pretorius, Schweitzer Engineering Laboratories, USA and South Africa

10:10 – 10:40 Coffee break at the CPUT Auditorium - Exhibition Area

10:40 – 12:20 Morning Session S3.2: Chair: Alexander Apostolov (PAC World, USA)

10:40 – 11:05 An investigation into the performance of distance protection relays during cross-country faults on

closely-coupled parallel transmission lines, K R Pillay, eThekwini Electricity, University of KwaZulu-Natal, B. S

Rigby, etalumiSe, Durban University of Technology, South Africa

11:05 – 11:30 The benefits of an automation framework within role based remote access control systems

for substation devices, J. Hector, Eskom, South Africa

11:30 – 11:55 Movement to the full digital substation, S. H. Richards, Alstom Grid, UK, D. Chatrefou, A. Procopiou,

Alstom Grid, France

Alectrix (Pty) Ltd | Tel: +27 21 790 1665 | info@alectrix.co.za | www.alectrix.co.za | www.omicron.at | info@omicron.at

5 Years Extended Warranty

...and he is really excited about OMICRON´s test equipment!

The CMC 356 is the universal solution for testing all relay generations and types.

It is designed for protection testing of electromechanical relays as well as for testing modern IEC 61850 IEDs.

Powerful – First choice for all applica-tions requiring very high power6 x 430 VA / 3 x 860 VA / 1 x 1000 VA

Dynamic – Powerful current sources with great dynamic range6 x 32 A / 3 x 64 A / 1 x 128 A

Accurate – Accurate current and voltage output synchronization with GPS or IRIG-B for End-to-End testing (typical error < 5 µs)

Supportive – Highest level of technical support and comprehensive training programs for electrical engineers

Get a picture of genuine innova-tions from OMICRON which made protection testing simpler than ever.

My Daddy Tests Protection Relays

CMC 356_Alectrix_A4_EnergizeMargin.indd 2 2011-11-15 9:25:04 AM

Alectrix (Pty) Ltd | Tel: +27 21 790 1665 | info@alectrix.co.za | www.alectrix.co.za | www.omicron.at | info@omicron.at

5 Years Extended Warranty

...and he is really excited about OMICRON´s test equipment!

The CMC 356 is the universal solution for testing all relay generations and types.

It is designed for protection testing of electromechanical relays as well as for testing modern IEC 61850 IEDs.

Powerful – First choice for all applica-tions requiring very high power6 x 430 VA / 3 x 860 VA / 1 x 1000 VA

Dynamic – Powerful current sources with great dynamic range6 x 32 A / 3 x 64 A / 1 x 128 A

Accurate – Accurate current and voltage output synchronization with GPS or IRIG-B for End-to-End testing (typical error < 5 µs)

Supportive – Highest level of technical support and comprehensive training programs for electrical engineers

Get a picture of genuine innova-tions from OMICRON which made protection testing simpler than ever.

My Daddy Tests Protection Relays

CMC 356_Alectrix_A4_EnergizeMargin.indd 2 2011-11-15 9:25:04 AM

11:55 – 12:20 Upgrading and optimizing the relay testing process, Laura Steenkamp, ESS, South Africa

12:20 – 13:00 Lunch break at the CPUT Auditorium - Exhibition Area

13:00 - 13:30 Poster Session at the CPUT Auditorium - Exhbition Area

13:30 - 15:10 Afternoon Session S4.1: Chair: Adam Bartylak (ESKOM, South Africa)

13:30 – 13:55 System Iintegration for an IEC 61850 compliant actuator node, J. Retonda, P. Petev, C.Kriger,

Sh. Behardien, Center for Real-Time Distributed Systems, CPUT, South Africa

13:55 – 14:20 Method for a parallel solution of a combined economic emission dispatch problem, S. Krishnamurthy,

R. Tzoneva, Cape Peninsula University of Technology, South Africa

14:20 – 14:45 Application and operational experience of IEC 61850, Jorge Cardenas, Camilo De Arriba, Alberto Lopez De

Viñaspre, Gonzalo Garcia, GE Digital Energy, Spain

14:45 – 15:10 Testing considerations for line current differential schemes, K. Lee, Hydro One Networks Inc., Canada,

D. Finney, N. Fischer, B. Kasztenny, D. Joubert, Schweitzer Engineering Laboratories, USA & South Africa

15:10 – 15:40 Coffee break at the CPUT Auditorium - Exhibition Area

15:40 - 17:20 Afternoon Session S4.2: Chair: Adam Bartylak (ESKOM, South Africa)

15:40 – 16:05 Making smart substation even smarter - Five new Ideas for power substation automation networks,

Chih-Hong LIN, Moxa Europe, Germany

16:05 – 16:30 Performance investigation of the protection function of IEC 61850-9-2 process bus based Intelligent

Electronic Devices (IEDs), A.C. Adewole and R. Tzoneva, Cape Peninsula University of Technology, South Africa

16:30 – 16:55 GPS synchronised primary injection tests to prove the stability of the 765kV Perseus – Beta line differential

scheme, J. Cronje, Eskom Transmission Engineering, T. Wink, Megawatt Solutions, A. Dierks, Alectrix, S. Africa

16:55 – 17:20 Standards based engineering of substation protection, automation and control systems, A. Apostolov, USA

17:20 – 17:30 Photo Contest Awards Ceremony

17:30 Closing of the PAC World Africa Conference

Friday, 2 July 2013

Technical Tour - 765 kV Sterrekus Eskom Substation

This state of the art facility is at a very nice location – a nice drive to the substation, approx. 20km from

CPUT, offers a spectacular view of Table Mountain and Koeberg Power Station. The preliminary schedule is:

9:00 Departure from CPUT by bus

10:00 Earliest arrival time at the substation

On arrival Coffee & Safety briefing

Overview Eskom / 765kV Capital Expansion Program / Breaker and a half SS layout | Overview IEC61850 –

Where and why | 90min tour of the substation in small groups led by an Eskom Transmission' representative

Finger lunch

14:00 Latest departure time from the substation by bus

15:00 Latest return to CPUT

Please register for the technical tour as early as possible to make sure

that you will be able to visit the substation.

Alectrix (Pty) Ltd | Tel: +27 21 790 1665 | info@alectrix.co.za | www.alectrix.co.za | www.omicron.at | info@omicron.at

5 Years Extended Warranty

...and he is really excited about OMICRON´s test equipment!

The CMC 356 is the universal solution for testing all relay generations and types.

It is designed for protection testing of electromechanical relays as well as for testing modern IEC 61850 IEDs.

Powerful – First choice for all applica-tions requiring very high power6 x 430 VA / 3 x 860 VA / 1 x 1000 VA

Dynamic – Powerful current sources with great dynamic range6 x 32 A / 3 x 64 A / 1 x 128 A

Accurate – Accurate current and voltage output synchronization with GPS or IRIG-B for End-to-End testing (typical error < 5 µs)

Supportive – Highest level of technical support and comprehensive training programs for electrical engineers

Get a picture of genuine innova-tions from OMICRON which made protection testing simpler than ever.

My Daddy Tests Protection Relays

CMC 356_Alectrix_A4_EnergizeMargin.indd 2 2011-11-15 9:25:04 AM

Alectrix (Pty) Ltd | Tel: +27 21 790 1665 | info@alectrix.co.za | www.alectrix.co.za | www.omicron.at | info@omicron.at

5 Years Extended Warranty

...and he is really excited about OMICRON´s test equipment!

The CMC 356 is the universal solution for testing all relay generations and types.

It is designed for protection testing of electromechanical relays as well as for testing modern IEC 61850 IEDs.

Powerful – First choice for all applica-tions requiring very high power6 x 430 VA / 3 x 860 VA / 1 x 1000 VA

Dynamic – Powerful current sources with great dynamic range6 x 32 A / 3 x 64 A / 1 x 128 A

Accurate – Accurate current and voltage output synchronization with GPS or IRIG-B for End-to-End testing (typical error < 5 µs)

Supportive – Highest level of technical support and comprehensive training programs for electrical engineers

Get a picture of genuine innova-tions from OMICRON which made protection testing simpler than ever.

My Daddy Tests Protection Relays

CMC 356_Alectrix_A4_EnergizeMargin.indd 2 2011-11-15 9:25:04 AM

REAL TIME DIGITAL SIMULATION FOR THE POWER INDUSTRY

New developments in protection and control for the RTDS Simulator:• Synchronizing the simulation timestep to GPS clock (1PPS, IEEE 1588, IRIG-B) for testing PMU devices• Streaming IEEE C37.118 data from simulated PMU devices to the outside world• Testing of digital substations with IEC 61850 GOOSE and Sampled Values• Performing protection testing with a combination of both physical and simulated protection deviceswww.rtds.com

Is your system up to the test?

Me and my brand−new CIBANO 500! Love, DadMe and my brand−new

…and since he has got his new CIBANO 500 he's at home earlier than ever!

My Dad tests circuit breakersThe new CIBANO 500 is the fi rst 3-in-1 test system worldwide to combine a micro-ohmmeter, a timing analyzer, and a circuit breaker supply in one device. This helps Dad to carry out all kinds of tests on all types of circuit breakers, quickly and with little wiring. Even better, it weighs only 20 kg / 44 lbs.

The unique wiring concept makes circuit breaker testing safer and easier. All tests can be carried out with both sides of the circuit breaker grounded and Dad doesn't need to rewire between the single tests. And now that measured data can be transmitted digitally, interference is history.

The Primary Test Manager (PTM) software gives him one overall report of all results.

Dad says circuit breaker testing has never been so easy. Check it out for yourself!

Alectrix (Pty) Ltd | Tel: +27 21 790 1665 | info@alectrix.co.za | www.alectrix.co.za | www.omicron.at | info@omicron.at

CIBANO-500-ad-for-Energize-Africa-205x275-ENU-2013-06-21.indd 1 2013-06-21 14:23:56

Technical Tour - 765 kV Sterrekus Eskom Substation

Friday, 2 August 2013

The technical tour offers a lot from a technological point of view:

765 kV Breaker-and-a-half scheme Dry tank breakers 6000 MVA transformer IEC 61850 Modern protection IEDs

This state of the art facility is in the final stages before being energized,

which will make it easier to move around the substation yard.

A 90 min tour of the substation (in small groups) led by a senior technician/

engineer from Eskom Transmission is included.

Gala Dinner - Gold Restaurant - Unique

African Cuisine

Wednesday, 31 July 2013

The PACWAC Gala Dinner will take place at the exceptional GOLD restaurant From the moment you walk into the aged brick interior, with its ancient doors and iron pillars, you will feel the heartbeat of a unique restaurant, which will take you on a taste safari from Cape Malay to African cuisine.

Captivating Mali Puppets will dance around with the drummers and singers. This unique live entertainment will take you into the heart of Africa.

Kindly sponsored by OMICRON electronics

Calculated Confi denceREAL TIME DIGITAL SIMULATION FOR THE POWER INDUSTRY

New developments in protection and control for the RTDS Simulator:• Synchronizing the simulation timestep to GPS clock (1PPS, IEEE 1588, IRIG-B) for testing PMU devices• Streaming IEEE C37.118 data from simulated PMU devices to the outside world• Testing of digital substations with IEC 61850 GOOSE and Sampled Values• Performing protection testing with a combination of both physical and simulated protection deviceswww.rtds.com

Me and my brand−new CIBANO 500! Love, DadMe and my brand−new

…and since he has got his new CIBANO 500 he's at home earlier than ever!

My Dad tests circuit breakersThe new CIBANO 500 is the fi rst 3-in-1 test system worldwide to combine a micro-ohmmeter, a timing analyzer, and a circuit breaker supply in one device. This helps Dad to carry out all kinds of tests on all types of circuit breakers, quickly and with little wiring. Even better, it weighs only 20 kg / 44 lbs.

The unique wiring concept makes circuit breaker testing safer and easier. All tests can be carried out with both sides of the circuit breaker grounded and Dad doesn't need to rewire between the single tests. And now that measured data can be transmitted digitally, interference is history.

The Primary Test Manager (PTM) software gives him one overall report of all results.

Dad says circuit breaker testing has never been so easy. Check it out for yourself!

Alectrix (Pty) Ltd | Tel: +27 21 790 1665 | info@alectrix.co.za | www.alectrix.co.za | www.omicron.at | info@omicron.at

CIBANO-500-ad-for-Energize-Africa-205x275-ENU-2013-06-21.indd 1 2013-06-21 14:23:56

Christoph Brunner (Switzerland)

Prof. Peter Crossley (UK)

Prof. Xinzhou Dong (China)

Jorge Miguel Ordacgi Filho (Brazil)

Rodney Hughes (Australia)

Prof. Paul Lee (Korea)

Platinum Sponsor:

Lanyard Sponsor:

Silver Sponsors:

Thank you !

Organizing Committee:

Co-Chairs: Prof. Raynitchka Tzoneva, CPUT, South Africa; Alexander Dierks, Alectrix, South Africa

Members:

Prof. Anthony Staak, Tomas van Breda, Phaphama Pand, CPUT, South Africa

Angela Sayegh, PAC World, USA

Technical Committee:

Chairman: Dr. Alexander Apostolov, PAC World, USA

Members:

Adam Bartylak, Eskom; Bruce Rigby, etalumiSe; Graeme Topham, Eskom, South AfricaAngela Sayegh, PAC World, USA

Advisory Committee:

To ensure that the PAC World magazine and conference are at a high level that meets the needs of the industry, we have invited world

known experts in the field of electric power systems protection, automation and control as members of the magazine Advisory Board

and the conference Advisory Committee. They help us with their ideas, comments and suggestions to improve the content and quality

of the magazine and the conferences. (The names are in alphabetical order):

PACWAC2013

Dr. Damir Novosel (USA)

Prof. Mohindar Sachdev (Canada)

Graeme Topham (South Africa)