Note: All information enclosed in this datasheet is based on our best knowledge and is given as indicative. Other special requirements are subject to prior discussion and approval of Vojay. Please contact us for any additional information or request.
ER316L Stainless and heat resistant steel
WELDING CONSUMABLESAWS A5.9: ER316LEN 12072: 19 12 3 LW.N.: 1.4430
ER316L
ER316L is austenitic stainless steel type material of the same chemical composition as ER316 except lower carbon content in order to reduce the possibility of formation of intergranular carbide precipitation.
Suitable for welding of austenitic CrNiMo steels. Resistant to intergranular corrosion up to 400°C and general corrosion conditions. Especially used in welding chemical tanks, pipes and equipments which are used in chemical, petrochemical, paint, textile, paper and shipbuilding industries, etc.
C Mn Si S P Ni Cr Mo Cu
≤0.03 1.00-2.50 0.30-0.65 ≤0.03 ≤0.03 11.00-14.00 18.00-20.00 2.00-3.00 ≤0.50
3. Chemical composition %
4. Mechanical properties, all weld metal
Heat treatment
Yield Strength,R (MPa)p0.2
Tensile Strength,R (MPa)m
Elongation,A (%)
Impact Energy ISO-V(J)
+20°C -120°C
AW ≥400 ≥550 ≥35 ≥65 ≥47
Process Diameter, mm
Box5-10 kg
D100 1 kg
D2005 kg
D30015 kg
BS30015 kg
K30015 kg
Coil25-40 kg
Drum100-300 kg
GTAW 1.00 - 5.00 x
GMAW 0.60 - 2.00 x x x x x x x
5. Available size and packaging
MATERIAL DATASHEET ER316L
Rev.: VJ-03/2015www.vojay-group.comVOJAY
Group
GTAW I1 Inert gas Ar (100%)
GMAW
M12 Mixed gas Ar + 0÷5% CO2
M13 Mixed gas Ar + 0÷3% CO2
1. Shielding gases (acc. EN ISO 14175)
2. Welding positions
PA PB PC PD PE PF PG
* Customer packing on request.