Welltec

22222222222222222222222222222222222

22222222222222222222222222222222222

22222222222222222222222222222222222

22222222222222222222222222222222222

22222222222222222222222222222222222

22222222222222222222222222222222222

22222222222222222222222222222222222

22222222222222222222222222222222222

Welltec ®

Wave Form Cladding System

55

Welltec

®

Radius

Arc Le

ngth

56 57

Introduction

Cadisch are proud to be the sole UK distributors for Metallwarenfabrik

Neustadt GmbH. Their Welltec ® range of profiled cladding has long

been an established product of choice for high quality cladding within

the European marketplace.

Welltec ® offers numerous options for the external envelope and has a

well developed range of flashings and trimming profiles to aid installation.

The product is available in a variety of finishes and materials including

polyester powder coated aluminium and polished stainless steel. We are

able to laser cut shapes, form perforated sheets and can bow many of the

profiles to suit the most ambitious of designs.

Welltec is a registered trademark of Metallwarenfabrik Neustadt GmbH

Product Properties

Bowing and Crown Bowing

All Welltec ® profiles can be supplied bowed

with the corrugation, with some available crown

bowed against the corrugation. This is particularly

important when considering applications such

as canopy roofs, tunnel linings and curved roofs.

We are also able to include progressive narrowing

of the overall width towards one end which makes

Welltec ® an ideal cladding solution for domed

structures and cupola roofs.

NB. Not all profiles can be crown bowed please consult our technical department for further details. Minimum order quantities may apply to certain products in this section.

Crown Bowing

58 59

Perforations

Welltec ® offers perforation options on most profiles

over entire or partial areas. Typical uses are for

ventilation, light diffusion and acoustics. We offer

most perforation patterns including standard round

holes, squares or special shapes.

Please contact our technical department for further

information on perforation options.

Edges

When setting out panels using Welltec ® we are

able to produce bespoke edging details to our

panels allowing easy fixing without the need

for a separate component. This allows additional

tolerance to be built in aiding on site fixing.

Materials and Finishes

All Welltec ® products are available in thicknesses

from 0.5–1mm and in a range of materials and

finishes including:

• Aluminium

• Brass

• Copper

• Stainless Steel

• Mild Steel

• Polished

• Natural Mill

• Polyester Powder Coated (PPC)

• Poly Vinyl Coated (PVF)

Specification Details

When specifying non standard or variable Welltec ®

patterns eg. N32 please apply the following criteria:

a) Product Group W = Wave formed Sheets

T = Trapezoidal Sheets

SP = Specially Profiled

S = Extra Profiled Plates

Z = Zigzag Sheets

b) Depth of Profile = in millimetres e.g. 20

c) Distance between profiles apex in millimetres e.g. 50

This section above is therefore specified W 20 / 50

Case Study

Magdeburg Children’s Centre, Germany

The Magdeburg Children's Centre was commissioned

to be in keeping with the Millennium Tower nearby.

The space rocket themed building has been clad

using Welltec ® material, where this differs from

most is that the top edge of the panel style is

W20/50 and opens at the bottom edge to SR20/50.

Some panels also had star window shapes laser cut

out, all were face fixed using Ejot screws.

Specification

Designer: Niebergall and Schaller

Contractor: Rennspiess Bow GmbH

Mesh Type: Welltec W20/50 - SR20/50

Material: Aluminium

Thickness: 1mm

Finish: Polyester Powder Coated RAL 9006

60 61

62 63

N17 N19

Available Materials:

Aluminium

Standard Thicknesses:

1mm

N20


Stainless SteelMild SteelAluminium


1mm


Aluminium


1mm

N21




1mm

The dimensions quoted for profile heightsand widths are approximate.

64 65

N23


CopperBrassBronze


0.8, 1mm

N24




0.8, 1mm

N25




0.8, 1mm

N26




0.8, 1mm

Specialist Panels

Most of our Welltec® products can besupplied with individual hole patterns andperforations. Please contact our technicaldepartment for further information on all specialist fabrications.


66 67

N29




0.8, 1mm

N30




0.8, 1mm

N27




0.8, 1mm

N28




0.8, 1mm

Specialist Panels



68 69

N33




0.8, 1mm

N34




0.8, 1mm

N31




0.8, 1mm

N32




0.8, 1mm

Specialist Panels



70 71

N37



Holes:

K13


0.8, 1mm

N38



Holes:

K13


0.8, 1mm

N35




0.8, 1mm

N36




0.8, 1mm

Specialist Panels



72 73

N42




0.8, 1mm

N39




0.8, 1mm

N40




0.8, 1mm

Specialist Panels



N45




0.8, 1mm

74 75

Specialist Panels



N47




0.8, 1mm

N48




0.8, 1mm

N50




0.8, 1mm

N49




0.8, 1mm

76 77

N51


Galvanised Steel


0.8, 1mm

Specialist Panels



N52




0.8, 1mm

N53




0.8, 1mm

N54




0.8, 1mm

78 79

Specialist Panels



N57




0.8, 1mm

N58




0.8, 1mm

N55




0.8, 1mm

N56




0.8, 1mm

80 81

In order to trim and co-ordinate Welltec ® cladding

products, we are pleased to offer a range of fully

integrated trimming and connecting profiles.

Available in all of our standard metals and

finishes. Please be careful to state shape, overall

length and material / finish when ordering.

Available Dimensions:

• Lengths up to 5000mm

• Thicknesses from 0.75 – 2mm

Materials: Finishes:

• Stainless Steel • Bright Polished

• Mild Steel • Satin Polished

• Aluminium • PPC

• Copper • PVDF

• Mill Finish

Specification Dimension Key

When specifying connecting profiles it should

be understood that each condition in construction

can be different. To specify use the Profile code

(e.g. R01) followed by the relevant dimensions a-f.

e.g. R01/a20/b5/c20/d20/e5/f20

R01 Outer Corner

Connecting Profiles Series R Connecting Profiles Series EConnecting Profiles

R02 Inner Corner

R03 Pilaster Strip

R05 Lintel

R04 Soffit

R06 Window Ledge

E01 Outer Corner E02 Inner Corner

E03 Pilaster Strip

E05 Lintel

E04 Soffit

E06 Window Ledge

82 83

K01 Outer Corner

Connecting Profiles Series K

K02 Inner Corner

K05 Window Ledge

K041 Soffit

K011 Outer Corner

K06 Window Ledge

K03 Pilaster Strip K04 Soffit

K021 Inner Corner K031 Pilaster Strip

B01 Outer Corner

Connecting Profiles Series B Connecting Profiles Series S

B02 Inner Corner

B03 Pilaster Strip

B05 Lintel

B04 Soffit

B06 Window Ledge

S01 Outer Corner S02 Inner Corner

S03 Pilaster Strip

S05 Lintel

S04 Soffit

S06 Window Ledge

Date post:	27-Mar-2016
Category:	Documents
Upload:	daniel-austin
View:	223 times
Download:	5 times

Welltec

Documents