West 09 2014

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® WesternEdition

$3.00

Kobelco Breaks Ground at

New HQ...8

Ritchie Auction Draws

3,800 Bidders...42

Inside

By Lori TobiasCEG CORRESPONDENT

One month after a hillsidecollapsed burying dozens ofhomes and killing 43 vic-tims, the work in Oso,Wash., remains a recoverymission, but plans are underway for rebuilding thestretch of highway devastat-ed by the slide. TheWashington Department ofTransportation has beeninvolved with recovering thevictims, and will lead theefforts to establish StateRoute 530, the roadwaylinking the tiny town of Osoto the larger community ofDarrington and beyond.

“There is a human aspectinvolved in this,” said TravisPhelps, WSDOT spokesman.“There were a lot of victimsthat lost their lives.Everyone is being very sen-sitive to that. We’re not justgoing in and bulldozing.We’re being very slow,thoughtful and meticulous.We’re using excavators,backhoes, hand diggingtools and chain saws to gothrough this material veryslowly, so if we encounterhuman remains we can getthem to the medical examin-er as quickly and in the bestcondition as possible.”

Oso Remains a Recovery Mission After Slide

The Equipment Leasing & FinanceFoundation (the Foundation) released theApril 2014 Monthly Confidence Index forthe Equipment Finance Industry (MCI-EFI). Designed to collect leadership data,the index reports a qualitative assessmentof both the prevailing business conditionsand expectations for the future as reportedby key executives from the $827 billionequipment finance sector. Overall, confi-dence in the equipment finance market is65.1, remaining at the highest index levelin two years for the second consecutivemonth.When asked about the outlook for the

future, MCI survey respondent ThomasJaschik, president, BB&T EquipmentFinance, said, “The first quarter of 2014had positive results with respect to new

business activity, and the economy is on apositive trajectory. The conclusion of thewinter of 2013-2014 may be the catalystfor pent-up demand to begin to bereleased. This will have a positive impacton the equipment finance market through-out 2014.” April 2014 Survey Results: The overall

MCI-EFI is 65.1, unchanged from theMarch index.• When asked to assess their business

conditions over the next four months, 37percent of executives responding said theybelieve business conditions will improveover the next four months, up from 31.4percent in March. 60 percent of respon-dents believe business conditions willremain the same over the next fourmonths, down from 65.7 percent in

Leasing Industry ConfidenceRemains at Two-Year High

see FINANCE page 48

Alex Lyon Hosts Late

Rental Fleet Sale...44

May 3, 2014 • Vol. IX • No.9 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

www.constructionequipmentguide.com

Construction firms added jobs in 38 states over thepast 12 months, although job gains leveled off betweenFebruary and March, according to an analysis April 18by the Associated General Contractors of America ofLabor Department data. Association officials said theongoing year-over-year gains point to the urgency ofrevitalizing and initiating programs to encourage work-ers and graduating students to get construction careers.“The widespread gains in employment from a year

ago are encouraging, given the tough winter many statesexperienced right through March,” said Ken Simonson,the association’s chief economist. “The never-endingwinter of 2014 may account for the dip in the number ofstates that added construction jobs in the latest month,but it is also possible that single-family homebuilders arenot adding workers as some forecasters expected.”��Florida again led all states in both percentage and total

construction gains with an 11.5 percent rise and 41,000new jobs between March 2013 and March 2014. Otherstates adding a high percentage of new construction jobsfor the past 12 months included Oregon (10.8 percent,75,800 jobs) and Minnesota (10.4 percent, 10,200 jobs).

March Job FiguresReveal Mixed Bag

see JOBS page 48

Mayor Dan Rankin (L) of Darrington, Wash., and Mayor Barbara Tolbert ofArlington, Wash., watch the cleanup process.

see LANDSLIDE page 28

Published Nationally

Table of Contents ................4

Attachment Section ......................................................9-11

Truck & Trailer Section ..............................................21-23

Recycling Section ........29-37

Auction Section............40-51

Business Calendar ............46

Advertisers Index ..............50

Page 2 • May 3, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Visit www.sealsaver.comfor more information or contact us at

1-800-683-5189

Exclusively manufactured by:

Fluid ControlServices, Inc.1155 Allgood Road • Suite 15

Marietta, GA 30062

1-800-683-5189Fax: 770-509-5832

SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills

and Hot Slag Industries.

SatisfactionGuaranteed!

SEAL SAVER PROTECTIVECYLINDER COVER

KOMATSUD65EX-15

STOP the never ending cycle of cylinder repairs.

Made inthe USA

The SEAL SAVER WILL:Protect cylinders from the elements • Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring

Machines to DemoNEW PT-175

PT-300NEW SCM/EX

UML/SSL-150-VTDML-HY-125STCH/R-225

MTM-225RSL-150

300/U-225

Reserve by May 15thContact info: Michelle @ (678) 866-0582 • email: [email protected]

JACKSON, Wyo. (AP) A consultant said road gradingprojects may have contributed to a slow-moving landslidethat has displaced nearly 60 residents and damaged homesand businesses. The area around the slide has been the site of grading and

construction over decades, including construction of a resi-dential road and grading of a main highway. Landslide Technology engineer George Machan told city

officials the hill did not start sliding by itself. The Jackson Hole News & Guide reported the slide was

discovered April 4 on a hill above a residential area and theground is moving about an inch a day. Officials say they don't believe there’s any danger of a

catastrophe. (This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Years of Use...

Road GradingMay Have CausedWyo. Landslide

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 3, 2014 • Page 3

2005 Gradall G6-42P, Stk#: 9149, 6,000 lbs., 42ft., 4WD, 4WS, 3,664 hrs., Hyd. Self LevelingSystem, 48" Forks, 50" Tilt Frame, 13.00x24Foam Filled Tires, 4 Cyl. JD Eng ..........$29,500

2008 Terex TH8042, Stk#: 9152, 8,000 lbs., 42ft., 4WD, 4WS, 4,639 hrs., Hyd. Self LevelingSystem, 48" Forks, 50" Frame, 14.00x24 FoamFilled Tires, 4 Cyl. JD Eng ....................$36,500

2007 Skytrak 8042, Stk#: 9327, 8,000 lbs., 42Ft., 2,621 hrs., 4WD, 4WS, 60" Forks, 72"Frame, 13.00x24 Solid Rubber Tires, Hyd. SelfLeveling System, 4 Cyl. JD Eng ..........$38,500

2005 Ditch Witch RT40, Stk#: 8296, OROPS,1,528 hrs., 4 Way Blade, 64" Blade, SlidingBoom, 26x12.00x12 Tires, 3 Cyl. Duetz Eng....................................................................$13,500

2008 Broce KR350, Stk#: 8809, EROPS, A/C,1,855 hrs., 8 ft. Broom, 90" Blade, Air Tires, 4Cyl. Kubota Eng....................................$29,500

2003 JLG 600S, Stk#: 9236, 500 lbs., 60 ft.,5,040 hrs., 4WD, 15x19.5, Tires, 4 Cyl. DeutzDiesel Eng ............................................$29,500

2006 Gehl RS8-42, Stk#: 9324, 8,000 lbs., 42Ft., 4WD, 4WS, 4,191 hrs., 48" Forks, 66" Frame,13.00x24 Foam Filled Tires, Hyd. Self LevelingSystem, 4 Cyl. JD Eng..........................$29,500

2008 Cat D6T LGP, Stk#: HR-233, EROPS, A/C,FM Stereo, Sweep Rear Screen, St/Tilt Blade,6,822 hrs., Paccar PA56 Winch, 36" Pads, 10' 5"Height, 10'7" Wide Track to Track, 13 ft. Blade..............................................................$189,500

2006 BIL-Jax 3632T, Stk#: 9023, 36 ft., 500lbs., Electric Powered, Trailer Mounted$12,500

2005 Terex GTH1056C, Stk#: 8914, 10,000 lbs.,56 ft., 4WD, 4WS, 6,485 hrs., Outriggers, 48"Forks, 50" Tilt Frame, Hyd. Self LevelingSystem, 14.00x24 Foam Filled Tires, 4 Cyl. JDEng ......................................................$39,500

2008 John Deere 200D, Stk#: 9353, EROPS,A/C, FM Stereo, 6,389 hrs., 40" Bucket w/ManualThumb, 32" Pads, 10' 6" Wide..............$72,500

2009 Volvo G930, Stk#: #9246, EROPS, A/C, FMStereo, 5,505 hrs., 14 ft. Blade, Rear Ripper,14.00x24 Tires, 10' 9" Height, 8 ft. Wide, 6 Cyl.Volvo Eng ..........................................$119,500

2008 Genie GTH844, Stk#: 8165, OROPS,8,000 lbs., 44 ft., 4,653 hrs., 4WD, 4WS, 60"Forks, 52" Frame, 13.00x24 Hard Rubber Tires,4 Cyl. JD Eng........................................$34,500

2007 Cat D6T XL, Stk: #8738, EROPS, A/C, FMStero, S/U Tilt Blade, 5,477 hrs., Model D6HRipper S# 1EH04502, 24" Pads ..........$179,500

2007 Gehl RS5-34, Stk#: 9231, 5,000 lbs., 34 ft.,2,100 hrs., 4WD, 48" Forks, 48" Tilt Frame, Hyd.Self Leveling System, 15x19.5 Foam Filled Tires,4 Cyl JD Eng ........................................$29,500

2009 Cat 12M, Stk#: 8849, EROPS, 6,369 hrs.,A/C, Heat, FM Stereo, 14 ft. M/B, Scarifier, LowPro Cab, 80% Tires, 17.5x25 Tires, 11 ft. Height..........................................................$147,500

2009 Komatsu PC78US-6NO, Stk#: 9178, EROPS,A/C & Heat, FM Stereo, 1,739 hrs., 18" RubberTracks, 36" Bkt, 7' 7" Blade, 4 Cyl. Komatsu Eng ....................................................................$56,500

2012 Cat 272C, Stk#: 8722, EROPS, A/C, 144hrs., Aux. Hyd., 72" Bucket, 12x16.5 Tires, 4 Cyl.Cat Eng.................................................$47,500

2006 Lull 1044C-54, Stk#: 8913, 10,000 lbs.,54 ft., 4WD, 4WS, 4,748 hrs., 48" Forks, 74" TiltFrame, Outriggers, 14.00x24 Foam Filled Tires,4 Cyl. JD Eng........................................$39,500

2003 Broce CR350, Stk#: 9350, EROPS, A/C,1,421 hrs., P235/75Rx15x108S Tires, 8 ft.Broom, 4 Cyl. Cat Eng..........................$16,500

2003 Volvo EC290B LR, Stk#: 9348, EROPS,A/C, 8,747 hrs., 60" Bucket, 32" Pads, 11' 2"Wide ....................................................$49,500

1997 Cat D6R XL, Stk#: 9268, OROPS, Sweeps,Rear Screen, S/U Tilt Blade, 9,818 hrs., 24"Pads, 10' 7" Wide ................................$69,500

2006 Freightliner M2-106, Stk#: 9291, EROPS,A/C, FM Stereo, 79,500 Miles, 11Rx22.5 Tires,Cat Eng ................................................$48,000

1998 Cat D6R XW, Stk#: 9101, EROPS, A/C,Sweeps, Rear Screen, St/Tilt Blade, 90% U/C,7,851 hrs., Paccar PA56-E Winch S#9706072,30" Pads ............................................$109,500

2006 Lull 944E-42, Stk#: 9302, 9,000 lbs., 42ft., 5,351 hrs., 4WD, 4WS, 48" Forks, 48" TiltFrame, Hyd. Leveling System, 15.5x25 FoamFilled Tires, 4 Cyl. Cummins Eng..........$34,500

2004 John Deere 770CH II, Stk#: 9331, EROPS,A/C, FM Stereo, 4,143 hrs., 14.00Rx24 Tires, 14ft. M/B, 6 Cyl. JD Eng., 8 ft. Wide ........$79,500

2004 Komatsu PC300LC-7L, Stk#: 9263,EROPS, A/C, 1,475 hrs., 60" Bucket, 34" Pads,11' 3" Wide ..........................................$69,500

2004 Sky Track 10054, Stk#: #9223, 10,000lbs., 54 ft., 3,522 hrs., 4WD, 4WS, 60" Forks,60" Frame, Aux. Hyd., 17.5x25 Foam Filled Tires,4 Cyl. Cummins Eng ............................$49,500

2002 JLG G9-43A, Stk#: 8879, 9,000 lbs., 43 ft.,5,262 hrs., 4WD, 60" Forks, 74" Frame, 13.00x24Foam Filled Tires, 4 Cyl. JD Eng ..........$34,500

2010 Cat D5K LGP, Stk#: 8857, EROPS, Sweeps,6 Way Blade, 1,601 hrs., 26" Pads, 10' 6" Blade ..............................................................$99,500

2011 Fecon FTX100-L, Stk#: 2, EROPS, A/C, 12hrs., 60" Fecon Mulching Head, 16" Steel Pads,4 Cyl. Kubota Eng., 2011 Winch s/n 0030211GVW 500 lbs. ......................................$149,500

2008 Cat 320DL, Stk#: #9203, EROPS, A/C, FMStereo, 5,185 hrs., 42" Bucket, 32" Pads, Hyd.Quick Coupler ....................................$119,500

2008 John Deere 310J, Stk#: 9341, OROPS,4WD, 4,189 hrs., 24" Bucket, Stock Controls, 48"Forks, 62" Frame, 12x16.5 Front Tires, 19.5x24Rear Tires ............................................$42,500

"In Business for over 32 Years"www.hendrixmachineryllc.com

1-936-327-5430 • Email: [email protected] Se HablaEspañol

2008 Cat D6T XW, Stk#: 8931, EROPS, A/C, Heat,Twin Tilt Angle Blade, 4,696 hrs., 30" Pads, AllidH6G Winch s# F1489071, 14' 8" Blade $189,500

2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame,Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. SelfLeveling System, 4 Cyl. Cummins Eng...$34,500

2011 John Deere 650J LT, Stk#: HR-111,OROPS, Sweeps, Rear & Side Screens, 6 WayBlade, 80% U/C, 2,288 hrs., 18" Pads, 8' 9"Blade ..................................................$$79,500

2006 Cat D6R III XL, Stk#: 9113, EROPS, A/C,Sweeps, Rear Screen, S/U Tilt Blade, 5,974 hrs.,24" Pads, 10' 8" Wide ........................$129,500


Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment GuideLtd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, let-ters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subjectto Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarilyreflect the policy or opinions of this publication.Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsiblefor clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisementsare not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effortis taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

SPECIAL SECTION29 RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES2 ROAD GRADING MAY HAVE CAUSED WYO. LANDSLIDEA consultant said road grading projects may have contributed to a slow-moving landslide that has displaced nearly 60 residents and damaged homes and businesses.

6 MUELLER BECOMES MANAGERKPI-JCI and Astec Mobile Screens has hired Don Mueller as a regional sales manager of the northwest territory for its track-mounted products.

8 KOBELCO BREAKS GROUND AT NORTH, SOUTH AMERICAN HQEncompassing the 101,300 sq. ft. of building space will be an 87,991 sq. ft. parts warehouse to house an estimated $92 million dollar, 40,000 plus line item parts inventory.

14 HOLT CAT NAMES LEADERSHolt CAT, the Caterpillar Equipment and Engine dealer of south, central, north and northeast Texas, recently named Corinna Holt Richter as vice president, machinedivision, product support sales and Peter John Holt as vice president, power systems division, commercial engine sales.

14 CONEXPO-CON/AGG SETS 2017 DATES: SHOW TO BE HELD MARCH 7 TO 11 IN VEGASConExpo-Con/AGG is the Western Hemisphere’s global gathering place in North America every three years for the construction and construction materials industry, co-located with the IFPE exposition for fluid power/power transmission/motion control.

18 FIVE CONEXPO ATTENDEES UNLOCK ‘KEY TO SAFETY’ AT TRAINING PROGRAMCrane Institute of America awarded prizes to five individuals during this year’s ConExpo-Con/AGG. Prizes included “The Complete Package,” a new train-the-trainer combination program, which allows trainers to become a Crane Institute of America certified trainer and a Crane Institute Certification (CIC) authorized practical examinerin two weeks.

42 ALMOST 4,000 BIDDERS PARTICIPATE IN RITCHIE BROS. AUCTIONBidders came from 59 countries, including 48 U.S. states. More than 50 percent of the equipment was sold to out-of-state buyers, from as far away as Belgium,Guatemala and the United Arab Emirates.

44 ALEX LYON & SON HOLDS LATE MODEL RENTAL FLEET SALE IN TEXASThe April 17 auction featured construction equipment, support attachments, aerials, trailers and trucks.

CORRECTIONIn the April 5 Western edition, we received an inaccurately labeled photo of Peter J. Holt. His picture and name did not match up when published. See page 14 for the corrected version.

WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.

Editor In Chief Craig Mongeau Associate Editor Christine Reckner

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900

Toll Free 800/523-2200 Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates: Contact Edwin M. McKeon Jr.National Sales Manager215/885-2900

Toll Free 800/523-2200Fax 215/885-2910

e-mail [email protected]

Contact Dale Agnew• Arizona • Colorado • New Mexico • Oklahoma • Texas • Wyoming

Toll Free 877/877-4997 Fax 972/695-6049


Contact Frank Strazzulla• Alaska • California • Hawaii • Nevada • Oregon• Utah • Washington949/459-1767

Fax 949/203-2859e-mail [email protected]

Contact Patrick Kiel• Idaho • Montana

Toll Free 866/413-4265Fax 952/353-2750


Mobile LinkedIn Facebook Twitter YouTube

To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com

IN THIS ISSUE428 44

®

EQUIPMENT21 TALBERT E3Nitro Equalizing System

29 DOOSAN Material Handlers

30 SANDVIK CH540, CH550 Cone Crushers

DEPARTMENTS38 CLASSIFIEDS

40 COMING AUCTIONS

46 BUSINESS CALENDAR


1990 Caterpillar 963: #91618, Cab/AC, GP Bkt,Rear Ripper, 11,500 Hrs ..........................$39,500

2005 Caterpillar 963C: #81940, Cab/AC, 4&1Bkt, Single-Lever, 5400 Hrs....................$119,500

1995 Caterpillar 963B: #9838, Cab/AC, GP Bkt,Double-Lever, 9500 Hrs............................$49,500

2011 Caterpillar 953D: #81885, Cab/AC, GP Bkt,Double-Lever, 1000 Hrs..........................$199,500

2011 Caterpillar 953D: #82043, Cab/AC, GP Bkt,Rear Ripper, 1200 Hrs............................$199,500

2005 Caterpillar 953C: #80891, Cab/AC, GP Bkt,Double-Lever, 4200 Hrs............................$94,500

2002 Caterpillar 953C: #80517, Cab/AC, GP Bkt,Single-Lever, 4850 Hrs ............................$89,500


1999 Caterpillar 953C: #91202, Cab/AC, GP Bkt,Single-Lever, 7900 Hrs ............................$79,500

2007 Caterpillar 953D: #81891, Cab, AC, GP Bkt,Rear Ripper, 2200 Hrs............................$164,500

2005 Caterpillar 963C: #80620, Cab/AC, GP Bkt,Double-Lever, 5000 Hrs..........................$127,500


Call Doug / Sam:

(866) 485-7180


Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!

KPI-JCI and Astec Mobile Screens...

Mueller Becomes ManagerKPI-JCI and Astec Mobile Screens has

hired Don Mueller as a regional sales man-ager of the northwest territory for its track-mounted products.In his new position, Mueller will cover

Washington, Oregon, north-ern California, Hawaii,Alaska, British Columbia,Alberta, Montana andWyoming. Most recently,Mueller served as a territorymanager for AstecAggReCon West, a KPI-JCIand Astec Mobile Screensauthorized dealer based inEugene, Ore. Mueller has worked in the

aggregate industry for nearly40 years, starting at Telsmithin 1976 in the manufacturingfacility, and later switchingto the service department.He later worked for Cedarapids and thenBalzer Pacific, a former KPI-JCI and AstecMobile Screens authorized dealer.Steve Schetky, director of sales of the

western United States, said Mueller’s vastand varied experience made him the prime

candidate for the position.“Don has a unique combination of under-

standing how manufacturers operate, howdealerships function, and how to call on theend users,” Schetky said. “From his experi-

ence as a field mechanic, heunderstands the workingsof track machines, yet alsoknows what it takes to gainthe customer’s confidenceand trust. With theincreased track populationin western North America,we needed an additionaltrack regional sales manag-er to get ever better cover-age for our dealers and theircustomers. I am confidentwe will continue toincrease our presence in thetrack market, and Don hasall the tools to help make

that happen.”To contact Don Mueller, e-mail him at

[email protected]. (This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Don Mueller


DEALER IMPRINT AREA

> > >

Kennesaw, Georgia 30144www.kawasakiloaders.com

AN E.P.I.C. GENERATIONEFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

DEALER IMPRINT AREA

DEALER IMPRINT AREA

Kennesaw, Georgia 30144www.kawasakiloaders.com

eo kilo

ASCO SUPPLY CO., INC.Austin, TX 512/272-8922

San Angelo, TX 325/655-5666

San Antonio, TX 210/333-8000

Wichita Falls, TX 940/687-2726

www.ascoeq.com

ABILENE NEW HOLLAND, LTD.Abilene, TX 800/382-9271

www.anhltd.com

BANE MACHINERY INC.Dallas, TX 800/594-2263

Ft. Worth, TX 800/601-2263

Tyler, TX 800/594-2200

www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENTOklahoma City, OK 405/917-9191

Tulsa, OK 918/835-7200

www.oklahomaterritoryequipment.com

APCO EQUIPMENTNorth Las Vegas, NV 800/574-4089

www.apcoequipment.com

TRI-WEST TRACTOR, INC.Livermore, CA 925/455-8200

www.tri-westtractor.com

RASMUSSEN EQUIPMENT CO.West Valley City, UT 800/453-8032

www.rasmussenequipment.com

CLM EQUIPMENT CO. INC.Broussard, LA 337/837-6693

F: 337/837-3146

Lafayette, LA 337/837-6693

Lake Charles, LA 337/625-5942

Baton Rouge, LA 225/677-7838

Houston, TX 281/598-2500

www.clmequipment.com


Kobelco Breaks Ground at North, South American HQWhen Kobelco Construction

Machinery USA relaunched itspopular line of crawler excavatorsin North America in April 2013,the company had ambitious plansfor expansion. Just shy of one yearlater, Kobelco has broken groundon a new Corporate Headquartersin Katy, Texas, to support its fast-paced growth.According to Pete Morita, presi-

dent of Kobelco ConstructionMachinery USA, “We couldn’t bemore pleased with the success andgrowth we’ve accomplished in thepast year. As a team, we’ve workedtirelessly to bring back theKobelco brand and core companyvalues that contractors across theUnited States, Canada and SouthAmerica value. The recent ground-breaking at the site of our new cor-porate headquarters is symbolic ofour success and reinforces ourlong-term commitment to the mar-ketplace.”The company’s LEED certified,

101,300 sq. ft. headquarters will belocated at Ten West Crossing inKaty, Texas, and is situated on justover 7 acres of property. Kobelcowill have room to add subsequentbuildings as demand for the com-pany’s products continues toincrease.Encompassing the 101,300 sq.

ft. of building space will be an87,991 sq. ft. parts warehouse tohouse an estimated $92 milliondollar, 40,000 plus line item partsinventory. An additional 13,339 sq.ft. of space will be dedicated to anexpansive sales and service train-ing area, complete with a hands onbench test facility. The balance willbe comprised of employee offices.Kobelco chose the Katy, Texas.,

location due to its central time zoneand three-airport system for ease of

transportation into and out of thecity. With nearby Houston beingthe fourth largest city in the UnitedStates, its multi-access shippingsystem will allow the company toreceive all shipments from over-seas at local ports and ship prod-ucts to dealers and customers viarail, freight or air, depending on thetimeframe and need of the cus-tomer, product or part being trans-ported.According to Eric Hoffman,

parts manager of KobelcoConstruction Machinery USA,“Parts and service is such an inte-gral piece of our business.Customers demand the best andquickest service possible so we aresetting up our entire facility toensure that we can react quickly tocustomer requests. One of our core

company values is development ofpersonable business relationshipsthat are built on trust. We pick upthe phone and talk to customers,helping them whenever we can toensure they are getting the bestproduction from their Kobelcoexcavator possible. People havefound our personal approach veryrefreshing in a day and age wherevoicemails, text messages and e-mails have replaced human inter-action.”George Lumpkins, product mar-

keting manager for Kobelcoechoed a similar sentiment. “Wehave a very dedicated team of deal-ers across the United States andCanada. Our new headquarters isdesigned to foster ongoing rela-tionships with these dealers thatallow them to continue their salesand service training onKobelco products. By partner-ing with our dealers on thislevel, we are helping ensuretheir success with the productline. Our long-term teamapproach has helped solidifyour dealer network, leavingvery little open territory in theU.S. and Canada.”When the new headquarters

opens, Kobelco ConstructionMachinery USA also will takeon responsibility for the sales,dealer development and serv-ice of Kobelco products inSouth America.Kobelco Construction

Machinery USA originallyanticipated building a U.S.headquarters within 5 years ofits brand relaunch, but expedit-ed plans to do so this past sum-mer, scouting and selecting alocation before the end of the2013 business year. In late January, the company

officially broke ground follow-ing an annual sales meeting onJan. 22, at the site of the newfacility, with many of theemployees who have been socrucial to the company’s earlysuccess looking on.Kobelco has signed a nine

year lease agreement on thenew facility, with plans tooccupy the building bySeptember 2014.

(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)

Kobelco employees gatheraround a Kobelco excavatoras they break ground on theirnew corporate headquartersin Katy, Texas.

(L-R): Randy Hall, national salesmanager; Pete Morita, presidentand CEO; and Ronald Hargrave,vice president of operations,Kobelco Construction MachineryUSA, dig in for a traditionalgroundbreaking at the location ofthe company’s soon to be newcorporate headquarters in Katy,Texas.

A Kobelco excavator gets ready to begin site preparation work at the future site of the company’sKaty, Texas, based North American headquarters.

Machine-MountedDowel Pin DrillsNow Available

Minnich Manufacturing’s series of machine-mounteddrills are now available with a number of features engineeredto increase safety and productivity in dowel-pin drillingapplications, and are available in both hydraulic and pneu-matic options.

Primarily used for full-depth repair, or “patchwork,”Minnich Manufacturing offers excavator/backhoe/skidsteer-mounted units that are ideal for horizontal patchworkjobs with a relatively long distance between the areas to bedrilled. Apart from increased portability, the dowel pin drillsalso are a safe alternative for operators, eliminating fatigueby utilizing the carrier to transport the drill.

Minnich’s pneumatic machine-mounted drills are pow-ered by a compressor, mounted to the counter-weight of thecarrier or in the bucket of a backhoe, offering a self-con-tained solution for patchwork jobs. Many patchwork jobsrequire the work to be done in high-traffic areas, which makeit of the utmost importance to utilize a highly mobile carrierand drill combination.

For more information, visit www.minnich-mfg.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Pages 9-11For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachments

Minnich’s pneumatic machine-mounted drills are pow-ered by a compressor, mounted to the counter-weightof the carrier or in the bucket of a backhoe, offering aself-contained solution for patchwork jobs.

Brushcat Rotary Cutters Offer BetterPerformance, Shorter Deck Length

The Brushcat rotary cutter attach-ments from Bobcat Company provideenhanced cutting performance, durablecomponents and several safety fea-tures. These attachments are designedto help compact equipment operatorscut overgrown grass, brush and smalltrees. They transform undergrowth intomulch.

Ideal for clearing trails, pastures ornew construction sites, the new Bobcatrotary cutters have a shortened deck forimproved visibility. The oscillatingdeck enables the attachment to followthe ground surface, and the dual-bladedesign reduces the overall weight. Witha shorter deck than other models, theBrushcat rotary cutter has a tighterturning radius and is easier tofit and load on trailers, accord-ing to the manufacturer.

For improved efficiency andmaneuverability, the oscillatingdeck allows the rotary cutter toclosely follow ground con-tours, even on slopes. The stan-dard front discs combined withthe oscillating deck make theattachment easy to operatewhile still maintaining an even,smooth cut. Front roller kits,which minimize scalping, alsoare available as a dealer-installed option.

Available in five models, therotary cutters have a standard3-in. (7.6 cm) cutting height. Anoptional dealer-installed kit can beadded to increase the cutting height to 4in. (10 cm). With varying auxiliaryhydraulic flow capabilities, the newrotary cutters are compatible withBobcat carriers with hydraulic flowsranging from 15 to 40 gpm (56.7 to 151Lpm), depending on the specificmodel. Rotary cutter models includestandard flow or high-flow capabilityoptions in 66- and 72-in. (167 to 183

cm) widths, and an 80-in. (203 cm)model with high-flow capability. Thehigh-flow models provide increasedtorque for even better cutting perform-ance in thick brush, according to themanufacturer.

Dual Motor DesignIn order to reduce weight and short-

en the rotary cutter’s deck size, the newBrushcat rotary cutters are equippedwith two direct-drive, offset motorsfeaturing a dual-blade design. Thedirect-drive motor design means thereare fewer moving parts and no gearbox.The rotary cutter’s dual motors effi-ciently transfer power to the blades toquickly cut through brush.

Four blades are positioned with a1.5-in. (3.8 cm) overlap and provideenhanced cutting performance. To helpoperators work efficiently, if one bladecomes in contact with excessivelyheavy brush, additional pressure isapplied to that area to help the motorand blades recover faster. The rotarycutter’s double-edge blades canachieve bidirectional cutter rotation byswitching the cutter heads; this willalso increase the overall blade life.

Compatible CarriersBrushcat rotary cutters are approved

for use with select Bobcat skid steerloaders, compact track loaders, all-wheel steer loaders, Toolcat utilitywork machines and the V417VersaHandler telescopic tool carrier.Operators can quickly and easily con-nect Bobcat rotary cutters to the carrierwith the Bob-Tach attachment mount-ing system. This enables the operator tospend less time on attachment changesand more time clearing brush.

Safety FeaturesFront safety chains on the rotary cut-

ter help contain debris within the deckand prevent it from being thrown out-

side the cutting area. Thetapered roller on the rearof the rotary cutter pre-vents debris from flyingout of the back of the cut-ting deck; this increasesdeck maneuverability andturning while helping toeliminate gouging theground surface. As a safe-guard, a velocity fuse wasintegrated into thehydraulic system valve onthe standard-flow models.This fuse protects thedrive motor from damageby shutting off thehydraulic flow to the

rotary cutter if the hydraulic capacity ofthe motor is exceeded. For additionalsafety, a blade shutoff feature stopsblade rotation when the rear roller ofthe rotary cutter is raised off theground.

For more information, visitwww.bobcat.com.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

Ideal for clearing trails, pastures or new constructionsites, the new Bobcat rotary cutters have a shorteneddeck for improved visibility.

Page 10 • May 3, 2014 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGEWe Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688

No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheelloader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

Got MATERIALSto Move?

Next Issue ClosesThursday, May 8th

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 3, 2014 • Page 11

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!


Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

Scale ....................................................................................$80

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80

Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80

Bobcat A300 Skid Steer Loader, Scale 1:25 ..................$40

Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Bobcat E55 Compact Excavator, 1:25 Scale ................$60

Bobcat M200 Gold Skid Steer Loader, Scale 1:25 ......$30

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......$25

Bobcat S510 Skid Steer Loader, 1:25 Scale ..................$65




Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65



Case CX210C Excavator, 1:50 Scale ..............................$50

Case CX250C Excavator, 1:50 Scale ............................$195

Case 580 Super “N” Backhoe/Loader, 1:50 Scale ........$45

Case 1102 Vibromax Roller, 1:35 Scale ......................$100

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy

Trailer, 1:50 Scale ..........................................................$100

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............$90

Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$100

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100

Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$40

Caterpillar 323D L Excavator, 1:50 Scale ......................$90

Caterpillar 336D L Excavator, 1:50 Scale ......................$95

Caterpillar 365B L Series II Excavator, 1:50 Scale........$75

Caterpillar 963D Track Loader, 1:50 Scale ....................$60

Caterpillar 950 GC Wheel Loader, 1:50 Scale ..............$90

Caterpillar 950K Wheel Loader, 1:50 Scale ..................$80


Caterpillar 966K XE Wheel Loader, 1:50 Scale ............$95


Caterpillar 977 Traxcavator, 1:50 Scale..........................$60

Caterpillar 988K Wheel Loader, 1:50 Scale ................$120

Caterpillar 988K w/ Grapple, 1:50 Scale ......................$160

Doosan Moxy MT31 Articulated Truck ........................$100

Hamm GRW 280 Compactor w/Canopy, 1:50 Scale......$90

Hamm 3307 Compact Roller, 1:34 Scale........................$45

Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40

International 175 Crawler Loader, 4in1, 1:50 Scale ......$65

International 560 Pay Loader, 1:25 Scale ....................$145

International TD-20E Dozer, 1:64 Scale ........................$24

JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$75

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..

..........................................................................................$70

John Deere MC Crawler Dozer, 1:16 Scale ....................$60

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........$45

John Deere 460E Articulated Truck, 1:50 Scale............$70

John Deere 850K Dozer, 1:50 Scale ..............................$65

Komatsu D51 PX Dozer, 1:50 Scale................................$85

Komatsu D51 EX Dozer, 1:50 Scale................................$85

Komatsu D65PX-17 Dozer, 1:50 Scale ..........................$80

Komatsu D375 A Dozer, 1:50 Scale ..............................$125

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

Komatsu HM250 Articulated Dump Truck, 1:50 Scale..$75

Komatsu HM400-3 Articulated Truck, 1:50 Scale........$100

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$45

Komatsu WA500 Wheel Loader, 1:50 Scale ..................$80

Komatsu WB146 Backhoe/Loader, 1:50 Scale ..............$75

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..

..........................................................................................$90

Liebherr LTF 1060-4.1 4 Axle Crane, 1:50 Scale ........$215

Liebherr LTM 1070-4.1 4 Axle Crane, 1:50 Scale ........$265

Link Belt 210X3 Excavator, 1:50 Scale ..........................$45

Northwest 25D Backhoe, 1:50 Scale ..............................$60

Northwest 25D Shovel, 1:50 Scale ................................$75

Terex TR60 Off-Highway Truck, 1:50 Scale ................$160

Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140

Vogele Super 700 Small Paver, 1:50 Scale ....................$80

Vogele 1900 Tracked Paver, 1:50 Scale ......................$125

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$115

Volvo A40F Articulated Truck, 1:50 Scale....................$130

Volvo EC280 Excavator, 1:50 Scale................................$50

Volvo L220G Wheel Loader, 1:50 Scale ......................$120

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ............$90

Wirtgen W250i Cold Milling Machine, 1:50 Scale........$160

Wirtgen WR240 Recycler, 1:50 Scale ..........................$140

Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Euclid R-35 Quarry Truck (Conrad), 1:50 Scale $200Caterpillar 972K Wheel Loader, 1:50 Scale $95Caterpillar 950K Wheel Loader, 1:50 Scale $80

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.


Simplified profitability

Dynapac’s complete line of rollers and pavers combine years of experience with innovative thinking to make the job as fast, simple, and profitable as possible, from beginning to end.F1000 series pavers: • Cummins QSB 6.7 liter interim Tier 4 engine• North American styling featuring the lowest deck height in the industry at 63 inches • Easy to use control panel with one touch auto fill and cleaning modes CA2500-CA4000 single-drum vibratory rollers:• Static linear loads of 140-252 pli• Active bouncing control • Cummins or Deutz interim Tier 4 engine

Built for maximum performance, ease of maintenance and lower total cost of ownership, Dynapac’s rollers and pavers will provide you with more Uptime by Design.

CP224, CP224W and CP274 pneumatic tired rollers:• Smooth start-stop system for directional changes• Wide-base tires• Air-on-the-run

BANE MACHINERY, INC. 4 RIVERS EQUIPMENT4220 West Reno Ave.Oklahoma City, OK

73107800/OKC-BOYD405/942-8000

Fax: 405/945-8569

Ardmore, OK866/720-2693580/224-2693Lawton, OK

800/633-2693580/355-6667

2449 Manana Rd.Dallas, TX 75220214/352-2468

Fax: 214/353-2460

Tyler903-597-6641

Ft. Worth817/847-5894

BEE EQUIPMENT SALES LTD.2506 E. Slaton Rd.Lubbock, TX 79404

806/745-1511Fax: 806/455-0593

C. L. BOYD CO., INC.

Colorado Springs, CO1100 E. Cheyene Rd.

719/475-1100www.4rivers

equipment.com

Albuquerque505/884-2900

El Paso915/598-1133Farmington

505/326-1101

Fort Collins970/482-7154

Frederick303/833-5900

Hobbs575/392-6923Pueblo West719/547-3505


The next ConExpo-Con/AGG inter-national exposition will be held March7 to 11, 2017, at the Las VegasConvention Center in Las Vegas.Named ConExpo-Con/AGG 2017

chair is Richard M. Goldsbury, presi-dent Bobcat/Doosan North America &Australia/Oceania for DoosanInfracore Construction Equipment,West Fargo, N.D. He will lead the tri-ennial show’s management committee,a group of volunteer manufacturersand other industry stakeholders whooversee show planning to ensure theevent meets industry needs.ConExpo-Con/AGG is the Western

Hemisphere’s global gathering place inNorth America every three years forthe construction and constructionmaterials industry, co-located with theIFPE exposition for fluid power/powertransmission/motion control. Therecently held 2014 ConExpo-Con/AGG and IFPE saw record exhib-it and education numbers and nearly130,000 registered attendees, includ-ing 24-percent international.

“2017 will definitely build on themomentum of 2014, and we arealready in analysis and planning modejust weeks after such a successfulevent. Our focus is to amplify ourefforts to deliver an outstanding quali-ty show experience for our visitors,plus expand our exhibitor engagementoutreach that results in improvedexhibitor ROI,” said Goldsbury.Goldsbury is president of Bobcat

Company and the Doosan heavyequipment division in North America,Australia, New Zealand and otherOceania countries and territories,responsible for all operations in theseregions. He returned to the Bobcatorganization in 2008, serving as presi-dent, Bobcat Americas, and was pro-moted to his current position in July2010.Previously, Goldsbury served as

president of global product and busi-ness strategy with the security tech-nologies sector of Ingersoll Rand. Hehad been part of the Security sectorsince 2006 and also served as president

of Schlage Security Products. He hasbeen part of the industrial and con-struction equipment industry foralmost 30 years, with extensive globalexperience in general management,marketing, operations, finance, engi-neering, product portfolio manage-ment, aftermarket and mergers andacquisitions.Goldsbury is a director of the

Greater Fargo/Moorhead EconomicDevelopment Corporation. His leader-ship involvement with the Associationof Equipment Manufacturers (AEM),a show owner and show producer, isextensive and includes currently serv-ing on the AEM board of directors andas 2014 chair of its government andpublic affairs committee, and he hasserved as a director on the AEM CESector board.For more information, visit

www.conexpoconagg.com.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)

ConExpo-Con/AGG Sets 2017 Dates:Show to Be Held March 7 to 11 in Vegas

Holt CAT Names Executive Additions

Holt CAT, the Caterpillar Equipmentand Engine dealer of south, central,north and northeast Texas, recentlynamed Corinna Holt Richter as vicepresident, machine division, productsupport sales and Peter John Holt asvice president, power systems division,commercial engine sales.In her new role, Richter will lead a

planned expansion of the company’sproduct support sales group to signifi-cantly drive sales in the parts and serv-ices division for continued market sharegrowth. Richter joined Holt in 2011 andhas spent the last two years as general

parts manager in the organization’smachine division. As vice president of commercial

engine sales, Peter John Holt will directcontinued business success and identifygrowth opportunities for diesel and nat-ural gas engines and generator sets forelectrical power generation, petroleumand other applications. He is taking onthis new opportunity after successfullycompleting a two-year assignment asgeneral service manager in the machinedivision. A key focus for Richter and Holt will

be to ensure the company’s current $80

million capital investment program andcustomer service initiatives are success-ful and have a long lasting impact. Richter and Holt, the daughter and

son of Holt CAT CEO, Peter M. Holt,are fifth generation Holt family mem-bers working toward future stewardshipof the business. The Holts are descen-dants of Benjamin Holt, who, in 1904,developed the first successful track-typetractor which he named the“Caterpillar.”

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Corinna Holt Richter Peter John Holt

The three generations of Holt CAT leadership from (L-R): Vice President Peter John Holt, former CEO B.D.Holt, Vice President Corinna Holt Richter and currentCEO Peter M. Holt.

ALASKANC MACHINERY

www.ncmachinery.com800-478-7000Anchorage, AK907-786-7500

Dutch Harbor, AK907-581-1367Fairbanks, AK907-452-7251Juneau, AK

907-789-0181Prudhoe Bay, AK907-659-6900Wasilla, AK907-352-3400

MONTANATRACTOR AND EQUIPMENT

Billings, MT406-656-0202Billings-Sgt.406-245-4426

Bozeman406-585-5800Great Falls

406-761-7900Helena

406-442-2990

NEW MEXICOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Flora Vista505-334-5522 (Rental)

La Cruces575-647-9700Albuquerque

505-938-2000 (Rental)505-345-8411

Hobbs575-393-2148 (Rental)

575-393-3665Clovis

505-235-3294 (Rental)Farmington

505-327-5331

OKLAHOMAOCT EQUIPMENT

www.octequipment.comClinton

580-323-3422Oklahoma City405-789-6812

Tulsa918-437-5085

WASHINGTONN C MACHINERY800-562-4735

Seattle425-251-5800

Chehalis360-748-8845

Fife253-896-0878

Monroe360-805-6000Mt. Vernon

360-424-4292Wenatchee

509-886-5561Yakima

509-248-2371

TEXASANDERSON MACHINERY CO.www.andersonmachinery

texas.comCorpus Christi361-289-6043

Manor512-272-8133

Pharr956-781-5995San Antonio210-661-2366

Victoria361-575-8111

HOLT CATwww.holtcat.com

Dallas214-342-6700Ft. Worth

817-847-8880Irving

214-342-6700Waco

254-662-7377

GEORGE P. BANE, INC.www.banemachinery.com

Tyler903-597-6641

YELLOWHOUSE MACHINERY CO.www.yellowhouse.us

Abilene325-677-2291

Amarillo806-335-1681

Lubbock806-763-0473

Odessa432-580-3337San Angelo

325-651-3337Wichita Falls940-322-3337

MUSTANG CATwww.mustangcat.com

Houston 713-460-2000Beaumont

409-892-8412Bryan

979-775-7368Bryan

979-775-0639Channelview281-452-7368

Conroe936-756-1110El Campo

979-543-3389Freeport

979-233-7368Houston

713-462-9993Houston

713-228-7368LaMarque

409-935-7000Lufkin

936-639-5551Lufkin

936-632-6775Nederland

409-722-7368

WAGNER EQUIPMENT CO.www.wagnerequipment.com

El Paso915-493-5005 (Rental)

915-821-7651


Built from a lineage of market leaders for over 60+ years

ARIZONAEARHART EQUIPMENT

www.earhartequipment.comTucson

520-889-6396

NORTH DAKOTATRACTOR AND EQUIPMENT

Williston701-572-8377

CALIFORNIAHAWTHORNE CAT

www.hawthornecat.comSan Diego

800-437-4228Lakeside/San Marcos (Rental)

800-750-4228

HOLT OF CALIFORNIAwww.holtca.comPleasant Grove916-921-8969

QUINN CATwww.quinncompany.com10006 Rose Hills Road

City of Industry, CA 90601888-842-2155

Fax: 562-692-1843BakersfieldCorcoranFirebaugh

Foothill RanchFresno

LancasterLos AngelesOxnardSalinas

Santa MariaSylmar

HAWAIIHAWTHORNE CAT

www.pacific.hawthornecat.comHilo

808-961-3437Kauai

808-245-4058Kona

808-329-4521Oahu

808-677-9111Oahu

808-676-0227 (Rental)Maui

808-877-6538

NEVADACASHMAN EQUIPMENT

www.cashmanequipment.com3300 St. Rose ParkwayHenderson, NV 89052

702-649-8777Fax: 702-633-4699

Elko775-738-9871Reno/Sparks775-358-5111

WYOMINGTRACTOR AND EQUIPMENT

Worland307-347-4747

COLORADOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Aurora303-739-3000

Denver303-433-2727 (Rental)

Carbondale970-963-7368 (Rental)

Commerce City303-286-2300 (Rental)

Colorado Springs719-390-7316 (Rental)

719-635-1669Granby

970-328-2080 (Rental)

Gypsum970-328-2080 (Rental)

Hayden970-276-3781 Silverthorne

970-262-3788 (Rental)Fort Collins

970-493-5005 (Rental)Grand Junction

970-245-6546 (Rental)970-242-2834

Pueblo719-544-0088 (Rental)

719-544-4433

Steamboat Springs970-871-1990 (Rental)

Windsor970-278-1750 (Rental)

Burlington719-346-7880 (Rental)

(719) 346-5132Durango

970-259-2001 (Rental)970-259-2001

Windsor970-278-1750



Powering Your Productivity...For Over A Century

Portable Power

©2013 Doosan Infracore Portable PowerFind Us on DoosanPortablePower.com (800) 633-5206 Follow Us on

Air CompressorSolutions, Inc.

TEXASOdessa

(432) 335-5900

Ditch Witch of Arizona

ARIZONAPhoenix

(602) 437-0351

Ditch Witch of Southern Arizona

ARIZONATucson

(520) 579-0261

Volvo ConstructionEquipment & Services

CALIFORNIABakersfield

(661) 387-6090

Fresno(559) 834-4420

San Leandro(510) 357-9131

Sacramento(916) 388-2244

San Diego/Lakeside(619) 441-3690

Corona(951) 277-7620

Blueline Rental

TEXASArlington

(817) 633-1010

Houston(713) 681-9221

OREGON7000 SW Sandburg Rd.Portland (503) 639-8910

7909 N. Upland DrPortland (503) 286-6400

29550 Airport RoadEugene (541) 689-7407Medford (541) 779-3444

NEVADASparks (775) 356-9333

WASHINGTONSeattle (206) 722-5800

Arlington (360) 474-8461Fife (253) 926-4386

Bellingham (360) 756-6572Yakima (509) 248-5636Pasco (509) 545-1959

Wenatchee (509) 884-2934Spokane (509) 536-7300

Pape Material Handling Inc. / Bobcat Westwww.papemh.com www.bobcatwest.com

Air Compressors & Light Towers: New, Rental, Rental Sales, Generators:Rental Only


Five ConExpo Attendees Unlock‘Key to Safety’ at Training Program

Crane Institute of America awardedprizes to five individuals during thisyear’s ConExpo-Con/AGG. Prizesincluded “The Complete Package,” anew train-the-trainer combination pro-gram, which allows trainers to becomea Crane Institute of America certifiedtrainer and a Crane InstituteCertification (CIC) authorized practicalexaminer in two weeks. Crane Institute of America congratu-

lated the following individuals for“Unlocking the Key to Safety” duringthe show:• Larry Hopkins, Operating

Engineers Training Trust, Whittier,

Calif.• Jeff Smith, PAR Electrical

Contractors, Kansas City, Mo.• Hugh Baptiste, AFC Crane Hawaii

Inc., Honolulu, Hawaii• Shannon Syzdek, Liebherr,

Houston, Texas• Simon and Linda Dzajkich,

Southwest Concrete Products, OakHills, Calif.The mobile crane complete package

covers current standards, causes ofaccidents, interpreting load charts, pre-op inspection and crane setup. In addi-tion, trainers may lease Crane Instituteof America’s online training program

materials. Both limited and unlimitedlicenses are available.Upon completion of the CIC author-

ized practical examiner portion of thepackage, trainers can conduct in-housepractical exams to certify crane opera-tors to meet or exceed OSHA require-ments. CIC is a nationally accredited,OSHA-recognized certification forcrane operators, riggers, and signalper-sons. For information, visit www.cranein-

stitute.com.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)

CIA staffers Barbara Weedin (L) and EduardoCarcache (R) with Jeff Smith.

(L-R) are Susan Headley, CFO; Hugh Baptiste andRandy Spaulding, training specialist.

Jim Headley (L) and ShannonSyzdek.

Barbara Weedin (L) and LindaDzajkich.

Larry Hopkins (L) and JimHeadley, director, Crane Institute.

WAUKESHA-PEARCE INDUSTRIES, INC.

12320 S. MainHouston, TX 77035

713-723-1050Fax: 713-551-0798

Tomball, TX281-351-9016

Kilgore, TX903-984-2011

Port Arthur, TX409-721-5305

Corpus Christi, TX361-884-8275

Edinburg, TX956-386-0107

San Antonio, TX210-648-4444

Pflugerville, TX512-251-0013

Buffalo, TX903-322-7150www.wpi.com

KOMATSU EQUIPMENTCOMPANY

1486 South Distribution DriveSalt Lake City, UT 84104

801-972-3660

4460 Pioneer WayElko, NV 89801775-753-7557

3825 Losee RoadNorth Las Vegas, NV 89030

702-399-1004

900 Marietta WaySparks, NV 89431

775-356-1334

6253 West Gilbert Industrial CourtHurricane, UT 84737

435-986-1000

10790 South Highway 59Gillette, WY 82718

307-682-1445

405 Jonah DriveRock Springs, WY 82901

307-686-1300


Komatsu Traction Control System (K-TCS) automatically increases performance in soft ground conditions.

The redesigned Tier 4 Interim Articulated Trucks will boost your productivity and lower your costs. From increased payload to improved traction control, the truck experts at Komatsu once again deliver on your need for a lower cost per ton moved.

ARTICULATED TRUCKS

From Komatsu – The Truck Experts

New operator’s cab provides better visibility and ergonomics.

Efficient Tier 4 Interim engine provides up to an 8% reduction in fuel consumption.

Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.komatsuamerica.com

.komatsuamerica.comwww

.komatsuamerica.com

KIRBY-SMITH

MACHINERY INC.6715 W Reno

Oklahoma City, OK 73137800-375-3339405-495-7820

Fax: 405-787-5973

12321 E. Pine StreetTulsa, OK 74116

800-375-3733918-438-1700

Fax: 918-437-7065

Abilene, TX877-577-5729325-692-6334

Amarillo, TX800-283-1247806-373-2826

Dallas, TX800-753-1247214-371-7777

Ft. Worth, TX877-851-9977817-378-0600

Lubbock, TX866-289-6087806-745-2112

Odessa, TX877-794-1800432-333-7000

www.kirby-smith.com

POWER MOTIVE CORPORATION

DENVER HEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216

888-271-3308

Colorado Springs, CO888-271-3308

Grand Junction, CO888-271-3308

Milliken, CO888-271-3308

Durango, CO888-271-3308

Cheyenne, WY888-271-3308

www.powermotivecorp.com


7.5 CUBIC YARDS…AND A CLOUD OF DUST.

Doosan DeliversDoosanEquipment.com/CloudDust11

Engineered for speed, easy control and fuel e�ciency, Doosan wheel loaders deliver class-leading li� capacities and fast cycle times, no matter which model you own. Load-sensing, closed center hydraulics and variable displacement piston pumps e�ciently power your ability to do more in a day, leaving a mountain of work in your dust.

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 0414097

Authorized Doosan Dealers

ARIZONADitch Witch of Arizona

Phoenix602-437-0351 • 888-316-3242

Tucson520-579-0261

www.ditchwitchaz.com

ARKANSASCraig Taylor Equipment Company

Fairbanks907-452-1192

www.craigtaylorequipment.com

CALIFORNIARGW Equipment Sales

Livermore925-606-2403

www.rgwequipment.com

Scott EquipmentFontana

909-822-2200 • 800-316-0327www.scottequip.com

COLORADOH & E Equipment Services, Inc.

Henderson303-289-2201

www.he-equipment.com

IDAHOBarry Rental, Inc.

Twin Falls208-734-4147

www.barryrental.com

OKLAHOMAH & E Equipment Services, Inc.

Oklahoma City405-789-7368

H & E Equipment Services, Inc.Tulsa

918-445-2666www.he-equipment.com

OREGONFeenaughty Machinery Co., Inc.

Portland503 282-2566 • 800-875-2566

www.feenaughty.com

TEXASTexas Timberjack, Inc.

Jasper409-384-4611

Lufkin936-634-3367 • 877-363-1143

www.texastimberjack.com

Venture Drilling SupplyGeorgetown512-869-2974

WASHINGTONFarmers Equipment Company

Burlington360-757-6084 • 888-855-4982

www.farmersequip.com

WYOMINGBobcat of Casper

Casper307-235-6685

www.bobcatofcasper.com

Bobcat of Gillette Gillette

307-686-4890www.bobcatofgillette.com

npmeiu Eqrolya TgiaCrASSNAKRA

.zahctihwctid.www6120-975-052

onsucT

3-888 • 5130-374-026xinhoeP

rf Ah octih WctiDAONZIRA

ww

Eq E &H

w82-099

S

ynpam CotnAS

omc

2423-16

anozir

o

moc.tnempuiqe-e.hww0122-928-330nosrdeenH

c. In,sceivre Stnpmeiu EqDOAROLCO

mco.piuqettocs.www7230-163-080 • 0202-282

aantnoFtnpmeiu EqttcoS

o DdzeirohtAu

s

omc.ythgauneef.www25-758-080 • 6625-228350

ndatlroP Co.yrenicha Myy MthgunaFee

GONEORmoc.tnempuiqe-e.hwww

6662-454-189aslTu

sceivre Stt Snpmeiu Eq E &H

real Denaso

Waf.www086-775-036

B EqsrmeraF

SWA125eoG

erutneV

6625

c. In, Co.

c. In,s

GINOMYmoc.puiqesermra

2849-558-888 • 408notgnliru

ynpam Cotnpmeiu EqNOTGNIHS

7492-698-12nwotgereo

ylppu Sgnillir D

tneipmuqewgr.www3042-660-259

ermoreviL Stnpmeiu EqWGRAINROIFLAC

mpiuqeorlyatgiar.cwww291-1254-709

sknabraiFnpmeiu Eqr olya TgiaCr

Eq E &H

w

Ba

moc.t3

sela SA

mo.ctnem

ynpam Cotn

8673-978-405yt CiaomhalkO

c. In,sceivre Stnpmeiu EqAMHOALOK

mo.clatneryrra.bwww7144-473-820

slla FniTwc. In,latne RyrrBa

OHAID

mo.ckcajreimbtsaxet.www11-336-787 • 6733-463-369

inkfuL

1164-438-940persaJ

cn, Ikcjarjebmis TaxeTSATEX

bo.bwww703

cboBo.bwww703

cabBoW

m3411

.c

moe.cttelligfotacb0894-866-7

etteillGetteill Gf ota

mo.crepsacfotacb6856-523-7

persaCreps Caf otca

GINOMY

Talbert’s New E3Nitro System Provides Haulers Versatility

Talbert Manufacturing, a leader in thespecialty trailer and transport industry, intro-duced its new E3Nitro. The nitrogen-assist-ed equalizing system provides the versatilityhaulers with East Coast trailers need to runin 3+1, 3+2 or 3+3 spread-axle configura-tions, according to the manufacturer.

The new E3Nitro is part of a larger seriesthat also includes the E2Nitro and E1Nitro,with three, two or one pin-on axle(s), respec-tively. An ENitro system, with its nitrogenaccumulator, oscillates around a central self-tracking pivot points to provide proportion-ate weight distribution in each axle group-ing.

With the E-Nitro series, Talbert is able tobuild trailers with capacities well beyondwhat can be achieved with simple mechani-cal or rigid axle extensions. Historically, EastCoast trailers had been limited to capacitiesbelow their potential because of axle-weightrestrictions and permitting issues. But byincorporating the new Talbert E3Nitro axleextension, haulers can scale their trailers

appropriately and use them to their fullpotential.

The E3Nitro is designed for trailers withcapacities of up to 85 tons (77 t) and cancarry 74,100 lbs. (33,611 kg) — 24,700 lbs.(11,204 kg) per axle — in its 3+3 configura-tion. An E2Nitro, which is designed for trail-ers with up to 65-ton (59 t) capacities, cansupport 49,400 lbs. (22,407 kg) — 24,700lbs. per axle — in a 3+2 formation. Finally,the E1Nitro is designed for trailers with up to55-ton (50 t) capacities and can carry 24,700pounds — 24,700 per axle — in its 3+1 con-figuration.

Unlike conventional, rigid East Coastspreaders that only provide self-trackingarticulation left and right, the E-Nitro Seriesalso provides articulation up and down. Thisgives drivers a much safer and stable alter-native than the East Coast spreaders of thepast. By using a nitrogen accumulator,Talbert’s E-Nitro system hydraulically setsaxle load capacity and keeps it there as thesystem equalizes up and down articulation.

This provides a much safer and more stableplatform that virtually eliminates “bridging”of the spreader, which is a situation in whichentire load rides on the rearmost axle,according to the manufacturer.

The flexibility of the E-Nitro spreadermakes it a valuable asset in all terrain appli-cations. It provides haulers the flexibility totravel into states that require the fourth axleto be at least 14 ft. 1 in. (4.2 m) from thethird. With an ENitro system, they canobtain permits for any of these configura-tions and travel legally in 47 states (conti-nental United States minus California).

Both the E1Nitro and E2Nitro are builtwith two cylinders, and the E3Nitro hasthree. The extra cylinder is built to handlemore capacity for heavy loads. In addition,the E3Nitro provides the ability to discon-nect cylinders for capacity alterations. Thismakes running in 3+1 or 3+2 configurationspossible because one cylinder can beremoved. Because the E3Nitro is modular,the spreader can be removed and the trailer

can operate as a four-axle in addition to the3+1, 3+2 and 3+3 configurations.

The series also incorporates two-speeddual landing gear for greater stability whenthe E-Nitro is disconnected from the trailer.For increased mobility on the job site, the E-Nitro system uses nitrogen to transfer weightoff the rear axles so they can be lifted out ofthe way for easy backing. Since no shim-ming is required, users save considerableoperational time and can travel empty with-out removing the booster and attachment.

E-Nitro is a new name for nitrogen-assist-ed systems that Talbert previously called TheEqualizer series. The company introducedits single-axle version in 2010 and shortlythereafter began manufacturing a tandem-axle model, as well.

For more information, call 800/348-5232or visit www.talbertmfg.com.


Pages 21-23To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

The E3Nitro is designed for trailers with capacities of up to 85 tons (77 t) and can carry 74,100 lbs. (33,611 kg) — 24,700 lbs. (11,204 kg) per axle — in its 3+3 configu-ration.

Page 22 • May 3, 2014 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 3, 2014 • Page 23

Ervin Set to Sell Wabash DuraPlate Trailers From J.B. HuntErvin Equipment Inc., Toledo,

Ill., has purchased 2,000 pre-owned Wabash Duraplate trailersfrom J.B. Hunt Transport Inc., aleading provider of logistics man-agement and transportation servic-es. Customers can purchase thetrailers as they are at any of Ervin's12 locations, or Ervin can adjustthem on location to meet buyers’specific needs. Ervin’s U.S. sites cover 75 per-

cent of the country to provide easyaccessibility for 90 percent of thecountry’s trucking companies. Thecompany’s business model allowsit to buy and accept delivery oflarge quantities of trailers in onetransaction. J.B. Hunt, meanwhile,is able to drop trailers in multiplelocations. The combination is whathas made the Ervin-J.B. Hunt rela-tionship so easy for both compa-nies for many years.Jeff Weber, Ervin’s vice presi-

dent of sales and marketing, saidthat because Ervin can store equip-ment in or close to customers’

facilities, the Wabash trailers willbe a staple in a variety of storageand basic cartage applications formanufacturers, particularly thosethat perform short, regional hauls. “It has become difficult to

obtain pre-owned equipment inand around a desired location in a

short period of time, but our com-pany was founded to address theseglitches,” he said. “We created afast, fluid process that works forour customers, guaranteed.“We’re proud of the fact that one

of the best trucking companies inthe U.S. trusts Ervin and relies on

us to buy its good, used equip-ment,” Weber said. “They continuedoing business with us because itssimple, easy and convenient.”Prior to selling any of the trail-

ers, Ervin will check them thor-oughly to ensure they exceed allfederal requirements for equip-

ment running in the United States. For more information, call

877/873-6863 or visit www.ervi-nusa.com.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Ervin Equipment has purchased 2,000 pre-ownedWabash Duraplate trailers from J.B. Hunt Transport.

Road Choice-Branded PartsEnters All-Makes MarketRoad Choice Truck Parts is the newest

brand to enter the heavy-duty truck industry’sprivate label all-makes market. Offering agrowing line of high-demand parts, includingair conditioning, air springs, air/electricalcoils and accessories, brake chambers,exhaust products, lighting, shock absorbersand universal joints, Road Choice all-makesparts are value-priced to compete withheavy-duty manufacturers’ and warehousedistributors’ private brand parts, according tothe manufacturer.Road Choice products are designed to

offer owners of out-of-warranty trucks quali-ty and reliability with parts covered under aminimum, one-year warranty.“With the average life of most class 8

trucks increasing, there is a growing demandfor parts at a value-price point as an alterna-tive to genuine or remanufactured parts,” saidRoad Choice private brand Manager DanBambrick. ” Road Choice brand parts aredeveloped specifically with the needs of sec-ond- and third-generation truck owners inmind. We’ve designed our line of dependablehigh-demand parts around their needs.”Bambrick anticipated that the addition of

Road Choice will offer consumers a new

alternative for all-makes parts and help thembetter manage the overall cost of repair andownership of their vehicles.

“Road Choice will use established partsdistribution centers for quick delivery of pop-ular parts,” said Bambrick. “Retailers willappreciate the convenience, while customerswill appreciate the quality and price.”Drivers and fleet managers can find the

growing selection of all-makes parts and alisting of authorized Road Choice TruckParts retailers at www.roadchoice.com.


“Road Choice will use established parts distributioncenters for quick delivery of popular parts.”

Dan BambrickRoad Choice Truck Parts



8600 Calabash Ave.Fontana, CA 92335562-286-6618

Fax: 909-356-1340275 W. Larch RoadTracy, CA 95304209-597-3824

5909 12th Street EastFife, WA 98424253-254-7950

91-210 Kalaeloa Blvd.Kapolei, HI 96707808-682-7263

5801 Silverado WayAnchorage, AK 99518855-342-72633521 Alken Street

Bakersfield, CA 93308855-927-2637

Western Pacific Crane & Equipmentwww.wpcrane.com

Kirby-Smith Machinery, Inc.www.kirby-smith.com

Oklahoma City, OK800-375-3339

Tulsa, OK800-375-3733Kansas City, KS877-851-5729St. Louis, MO866-279-1392

The GMK6300L all-terrain craneAt Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite.

Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

For more information, visit www.manitowoccranes.com

Tilt cab

MEGATRAK™

Removable outrigger box

LEADERS IN LIFTING

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 3, 2014 • Page 27Page 26 • May 3, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

210 X3 250 X3 250 X3 LF 300 X3 350 X3 470 X3

Weight: 47,840 lbs 55,336 lbs 61,950 lbs 65,918 lbs 80,028 lbs 111,554 lbs

Arm: 9 ft 8 in 9 ft 10 in 26 ft 3 in 10 ft 5 in 10 ft 8 in 11 ft 1 in

Bucket Weight: 1,440 lbs 1,790 lbs 750 lbs 1,940 lbs 2,580 lbs 3,350 lbs

Horsepower: 160 hp 177 hp 177 hp 207 hp 266 hp 362 hp

Max. Dig Depth: 21 ft 10 in 22 ft 8 in 47 ft 9 in 23 ft 4 in 24 ft 1 in 24 ft 10 in

ISO Breakout Force: 24,730 lbf 29,000 lbf 9,060 lbf 34,400 lbf 40,020 lbf 46,310 lbf

Bucket Digging Force: 34,170 lbf 39,120 lbf 18,570 lbf 42,760 lbf 55,750 lbf 60,700 lbf

Swing Torque: 47,204 lbf-ft 55,243 lbf-ft 51,482 lbf-ft 68,151 lbf-ft 82,607 lbf-ft 110,634 lbf-ft

Bucket Range: .61 - 1.75 yd3 .76 - 2.43 yd3 .50 - .86 yd3 .76 - 2.43 yd3 1.08 - 2.93 yd3 1.58 - 4.05 yd3

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make

Visit your Link-Belt excavator dealer todayand experience the X Factor for yourself.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 3, 2014 • Page 27Page 26 • May 3, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

210 X3 250 X3 250 X3 LF 300 X3 350 X3 470 X3

Weight: 47,840 lbs 55,336 lbs 61,950 lbs 65,918 lbs 80,028 lbs 111,554 lbs

Arm: 9 ft 8 in 9 ft 10 in 26 ft 3 in 10 ft 5 in 10 ft 8 in 11 ft 1 in

Bucket Weight: 1,440 lbs 1,790 lbs 750 lbs 1,940 lbs 2,580 lbs 3,350 lbs

Horsepower: 160 hp 177 hp 177 hp 207 hp 266 hp 362 hp

Max. Dig Depth: 21 ft 10 in 22 ft 8 in 47 ft 9 in 23 ft 4 in 24 ft 1 in 24 ft 10 in

ISO Breakout Force: 24,730 lbf 29,000 lbf 9,060 lbf 34,400 lbf 40,020 lbf 46,310 lbf

Bucket Digging Force: 34,170 lbf 39,120 lbf 18,570 lbf 42,760 lbf 55,750 lbf 60,700 lbf

Swing Torque: 47,204 lbf-ft 55,243 lbf-ft 51,482 lbf-ft 68,151 lbf-ft 82,607 lbf-ft 110,634 lbf-ft

Bucket Range: .61 - 1.75 yd3 .76 - 2.43 yd3 .50 - .86 yd3 .76 - 2.43 yd3 1.08 - 2.93 yd3 1.58 - 4.05 yd3

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make

Visit your Link-Belt excavator dealer todayand experience the X Factor for yourself.


Crews to Build Detour, Rebuild Highway Following SearchThe mudslide occurred on the

morning of March 22 in an areaknown as the Hazel slide, about 55mi. (88.5 kg) northeast of Seattle. Ittraveled a little over a mile, comingdown with enough force to gothrough a neighborhood, cross anddam the Stillaguamish River, crossthe road and go up the slope on thesouth side, then came back downthe south slope. “It acted like a wave,” Phelps

said. “It sloshed up one side andcame back down. It’s a pretty bigslide. We’re looking at big trees,pieces of houses, cars and somevery, very soupy clay, sand/mudmix. This material is still very wet.When the slide came down itchanged the whole geography ofthe valley. The U.S. GeologicalSurvey estimated that 1 millioncubic yards of soil were displaced.It was not a small slide by anycomparison by any measure. Italtered the course of theStillaguamish River.”In addition to looking for vic-

tims, workers also are taking careto find and preserve personalmementos, when possible, as well.But along with the challenge of thedebris, the watery mud and enor-mity of the disaster, workers alsomust beware of contaminationfrom gas cans, propane, septic sys-

tems and other toxins. Once the recovery efforts are

completed, the task will be to builda detour around the highway, andthen to rebuild the highway itself.The detour is expected to be

about 2 mi. (3.2 km) and will travelover a Seattle City Light access road.“Mobility is a big deal,” Phelps

said. “The Corps of Engineers ismaking significant improvements

to the access road. The NationalGuard made efforts to make it amore drivable road. We’re going tohire a contractor to maintain thatroad, open it up with limited hoursas a one-way piloted detour forfolks to get between Oso andDarrington. It will be for local res-idents only. You want to come andbe a ‘Looky Lou’ and see the land-slide, this is not the road for you.”

Currently, it takes about an hourand a half to drive from Oso toDarrington — about 15 mi. (24km) apart by Route 530. Before theslide, the highway was two lanes ineach direction. It carried about4,000 cars a day — 2,000 east-bound and 2,000 westbound. Mostof the traffic were commuters,traveling between the rural Osoand larger Darrington.

“It’s very rural here and there isa big lumber mill as well with lotsof logging trucks out here. Withthis highway out of commission itis a huge blow economically to thewhole region, and very big blow toDarrington,” Phelps said.When the work moves to

rebuilding the highway, the firsttask will be removing about100,000 cu. yd. (76,455 cu m) —or 10,000 dump trucks — of mate-rial from the highway. The debriscovers about one mile of the high-way and is at least 20 ft. (6 m)deep. But even once they do beginwork on the highway, they willproceed much as they had while inrecovery mode.“There is concern of human

remains on the roadway,” Phelpssaid. “A team of trained archeolo-gists will be making sure we’rechecking any material we are pick-ing up, and looking at it when weare scooping it. When we are mov-ing the materials, there will beanother spotter there to watch thematerial when it comes out. Thereis just a lot of stuff here. All differ-ent types of materials. It can beeasy on the initial move to misssomething. So we want to makesure we have fail safe built in.”Engineers won’t know what the

condition of the highway is until

LANDSLIDE from page 1

see LANDSLIDE page 48

When the work moves to rebuilding the highway, the first task will be removing about 100,000 cu.yd. (76,455 cu m) — or 10,000 dump trucks — of material from the highway.

Gov. Jay Inslee (L) and U.S. Rep. Suzan DelBene review maps of the mudslide areain Arlington, Wash.

The mudslide occurred on the morning of March 22 in an area known as the Hazelslide, about 55 mi. (88.5 km) northeast of Seattle. It traveled a little over a mile,coming down with enough force to go through a neighborhood, cross and dam theStillaguamish River, cross the road and go up the slope on the south side, thencame back down the south slope.

Increasing its presence in the solid wasteand recycling industries, Doosan InfracoreConstruction Equipment America has intro-duced three new material handlers and four-tine grapples. The first model beinglaunched in North America is theDX225MH-3 material handler. Additionalmaterial handlers will include a larger modelwith steel tracks, the DX300MH-5 and awheel model, the DX210WMH.Material handlers are not new to Doosan,

but this is the first time Doosan is buildingmachines specifically for material sortingand handling applications. Previously, deal-ers converted Doosan crawler excavators orwheel excavators into material-handlingmachines.

Built for Material HandlingDoosan material handlers were developed

to meet the demands of material handlingprofessionals by dedicated, in-house productengineering support. Each model is based ona proven and tested excavator model, facto-ry fitted with cab risers for increased visibil-ity, straight boom and droop nose arm foroptimal performance and improved machineguarding for maximum uptime. Straightbooms improve reach and lift height for bet-ter material placement, while droop nosearms provide good grapple clearance andenhanced access into containers, trucks andrailcars. Features such as dual-boom cylin-ders and under-mount arm cylinder place-ment provide excellent lifting capabilities forDoosan material handler operators, accord-ing to the manufacturer.

Cab Risers Provide BetterVisibility

Another commonly recognized materialhandler feature is its cab riser. Operatorshave better all-around visibility to the attach-ment and work area from the material han-dler’s cab riser. Standard fixed risers for theDX225MH-3 are 4 ft. (1.2 m), and 6 ft. (1.8m) for the larger DX300MH-5. Available asan option on the DX225MH-3 is a 6-ft. fixedriser.Fixed risers can easily be lowered for

transport with a self-contained, electronical-ly powered hydraulic system. Available as

an option for theDX225MH-3 andDX300MH-5 is a 6.5-ft. (2m) hydraulic cab riser. The6.5-ft. hydraulic cab riser isstandard equipment for theDX210WMH.

Grapple AttachmentsTo maximize their versa-

tility and productivity,Doosan material handlerscan be paired with a grapplefor material handling appli-cations. The 360-degreehydraulic rotating four-tinegrapples feature a semi-closed tine design, allowinga firm grasp on most materi-als. The tines are designedwith AR400 high-strength,abrasion-resistant steel forincreased durability, and the tine tips arereplaceable for easier maintenance.A 5/8-cu.-yd. (.48 cu m) grapple is

approved for use with the DX210WMH andthe DX225MH-3, while a 1-cu.-yd. (.76 cum) grapple is approved for use with theDX300MH-5. Connecting grapples toDoosan material handlers is fast and easywith a hose kit and mount.

Power Modes to Match theProject

Four power modes are available for theDoosan DX225MH-3 and DX300MH-5material handlers. Power modes help materi-al handler operators manage the balance offuel consumption and machine power to theworking conditions. The four selectablepower modes include:• Power+ mode: delivers the fastest work

group speeds and greater power for thosehigh demanding material moving applica-tions• Power mode: provides exceptional

power and superior performance for toughheavy lifting, quick truck loading and fasttravel speed• Standard power mode: enhances the

machine’s fuel consumption while deliver-ing high performance in everyday lifting and

moving of material• Economy mode: helps reduce fuel con-

sumption for low-demand applications andslows down machine movement for condi-tions that require more precise movementsThe DX210WMH material handler is

available with three selectable power modes. • Power mode• Standard power mode• Economy mode

Lifting Work ModeIn addition to the power

modes, the DoosanDX225MH-3 andDX300MH-5 material han-dlers have a lifting workmode. The lifting modeprovides increased pumptorque, low engine RPMsand an automatic powerboost.

OptionsFactory installed options

for Doosan material han-dlers vary by model.Options include the follow-ing:• Additional work lamps

(All models)• Cab guarding (All

models)• Frame guards (All models)• Fuel filter pump (All models)• Rotating beacon (All models)• Solid tires (DX210WMH only)• Air compressor (DX225MH-3,

DX300MH-5)• Catwalk (DX225MH-3, DX300MH-5)• Diesel powered coolant heater

(DX225MH-3, DX300MH-5)• Straight travel (DX225MH-3,

DX300MH-5)

Doosan TelematicsTelematics is standard for all three

Doosan material handlers, and will comewith a three-year subscription. Doosantelematics provides location information anda full range of machine operational informa-tion to owners, their dealer and Doosan.Information is provided through a simpleuser interface, accessible online via a Web-enabled computer or smartphone. The goalof telematics is to help owners monitor theirDoosan heavy equipment and manage main-tenance to reduce operating costs.For more information, visit

www.doosanequipment.com.(This story also can be found on


Doosan Material Handlers Strengthen Industry Presence

Pages 29-37

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

To maximize their versatility and productivity, Doosan material han-dlers can be paired with a grapple for material handling applications.

In addition to the power modes, theDoosan DX225MH-3 and DX300MH-5material handlers have a lifting workmode.

Page 30 • May 3, 2014 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

www.petersoncat.comNorthern California

888-738-3776Oregon/Southern Washington

800-452-7676

Chico, CARedding, CAFortuna, CAWillows, CAWillits, CA

Santa Rosa, CASan Martin, CA

San Leandro, CAEugene, OR

North Bend, ORKlamath Falls, OR

Redmond, ORMedford, ORAlbany, OR

Portland, ORSalem, OR

The Dalles, ORLongview, WA

www.wagnerequipment.comAlbuquerque, NM

505-345-8411Aurora, CO

303-739-3000Burlington, CO719-346-7880

Colorado Springs, CO719-635-1669Durango, CO

970-259-2001El Paso, TX

915-821-7651Farmington, NM505-327-5331

Grand Junction, CO970-242-2834

Hayden, CO970-276-3781

Hobbs, NM575-393-2148

Pueblo, CO719-544-4433Windsor, CO

970-278-1750

www.tractorandequipment.comBillings, MT

406-656-0202Billings-Southgate, MT

406-245-4426Bozeman, MT406-585-5800

Great Falls, MT406-761-7900

Helena, MT406-442-2990Williston, ND701-572-8377Worland, WY307-347-4747

www.mustangcat.comHouston, TX

713-460-2000Beaumont, TX409-892-8412

Bryan, TX979-775-7368

Bryan, TX979-775-0639

Channelview, TX281-452-7368

Conroe, TX936-756-1110El Campo, TX979-543-3389Freeport, TX

979-233-7368Houston, TX

713-462-9993Houston, TX

713-228-7368LaMarque, TX409-935-7000

Lufkin, TX936-639-5551

Lufkin, TX936-632-6775Nederland, TX409-722-7368

www.ncmachinery.comSeattle, WA

425-251-5800Chehalis, WA360-748-8845

Fife, WA253-896-0878Monroe, WA

360-805-6000Mount Vernon, WA

360-424-4292Port Angeles, WA

360-452-9222Wenatchee, WA509-886-5561Yakima, WA

509-248-2371Anchorage, AK907-786-7500

Dutch Harbor, AK907-581-1367Fairbanks, AK907-452-7251

Juneau, AK907-789-0181

Prudhoe Bay, AK907-659-9600

Wasilla, AK907-352-3400

CH540, CH550...

Sandvik Construction’s Latest ConeCrusher Offers Endless PossibilitiesSandvik Construction’s newly developed CH540 cone

crusher — the latest crusher in a series and the bigger CH550(launched in 2013), are cone crushers with endless combina-tion possibilities. They are the perfect match for any aggre-gate plant or quarry looking to increase production capacity,eliminate bottlenecks, reduce operating costs, and/or toimprove the quality of the end product, according to themanufacturer.The wide performance range provides customers with

adaptability and flexibility, with the crushers being able to beconfigured for either secondary or tertiary applications. “Our customers need to produce high quality aggregates

in a cost-efficient way,” said Sandvik Construction ProductLine Manager Martin Johansson.“In order to optimize their business our customers require

as few, and as short, maintenance interruptions as possible;this is now achieved by the CH500 series that gives them aversatile cone crusher which combines a small carbon foot-print with high performance. Sandvik has developed the newCH500 crusher series based on valuable input from our cus-tomers. So as to increase per-formance,while reduc-ing weightand height,we had tooptimize allour compo-nents — andthe end result isremarkable.” In order to

facilitate greaterreduction ratiosand productiv-ity than previ-ously possi-ble, the newC H 5 0 0 -s e r i e sc o m e swith:

•Sophisticateddesign withremarkable capacityin relation to size. • In order to maximize operational uptime the CH500-

series comes with Sandvik’s control system fitted as stan-dard.

• The control system enables the crusher to run at maxi-mum performance levels — automatically adjusting to vari-ations in feed conditions, pressure peaks and wear.• A dump valve ensures quick, safe tramp relief if some-

thing uncrushable gets into the crusher.• The wear parts have been adapted, ensuring a longer life-

time per ton produced. • In order to minimize health and safety risks when chang-

ing wear parts, the CH500-series does not use a plastic back-ing compound to attach the manganese.• The motors have the highest energy efficiency classifi-

cation (IE3), reducing emissions and power consumption. • Efficient power transfer capability due to new drive

arrangements that give a precise lining of the V-belts, deliv-ering more than five times longer life time. • Reduced noise emissions.• One of three eccentric bushings will cover 90 percent of

the application range. • The series is based on the HYDROCONE facilitating

the production of a high quality end product with excellentcubicity.

• The crushers are maintenance friendly with easi-ly accessible spare parts, all backed by a global serv-ice program. For more information, visit

www.Construction.Sandvik.com.(This story also can be found on Construction

Equipment Guide’s Web site at www.constructionequip-mentguide.com.)

Sandvik’s CH540 cone crush-er is the latest in the series.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 3, 2014 • Page 31

www.holtcat.com800-275-4658

Austin, TX • Bridgeport, TX • Corpus Christi, TXFort Worth, TX • Irving, TX • Laredo, TX

Lewisville, TX • Longview, TX • North Dallas, TXPflugerville, TX • San Antionio, TX • Sonora, TX

Texarkana, TX • Tyler, TX • Victoria, TXWaco, TX • Weslaco, TX

www.johnson-machinery.com

Riverside, CA951-686-4560

Indio, CA760-342-1597

Murrieta, CA951-696-1063Hesperia, CA

760-947-0967


Crush. Classify. Profit.

CRUSHING PLANTS

Closed-circuit PLANTS

CRUSHING PLANTS

SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.

For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w . i r o c k c r u s h e r s . c o m


Lokotrack ST2.4 mobile screen

The Lokotrack® ST2.4™ is a versatile, compact mobile screen that sets up quickly in just a few simple steps. Robust and reliable, the ST2.4 is built with high-quality components for more uptime and e� ciency. Screen media changes are safe and easy with an accessible screen box that raises hydraulically, providing the flexibility you need to meet different process requirements. Learn more by contacting your local Metso distributor today.

E-mail: [email protected]

Screen your way,every day.

CRISP INDUSTRIES, INC.323 Energy Way

Bridgeport, TX 76426940-683-4070

800-315-0871

Fax: 940-683-2181

South Texas 78155830-625-6822

Sequin, Texas 78155830-372-1110

CUTTING EDGE SUPPLY234 East O StreetColton, CA 92324

800-949-9014

Fax: 909-825-4569

Phoenix, AZ800-729-1473

N. Las Vegas, NV702-649-1303

COMPASS EQUIPMENT4688 Pacific Heights Rd.

Oroville, CA 95695530-533-7284

530-533-8610

Fax: 530-533-7657

www.compassequip.com


www.superior-ind.com

KING OF THE HILL

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?

McCOURT & SONSEQUIPMENT, INC.5141 Hwy 71 West

LaGrange, TX 78945979-242-5298888-838-9252

www.portablescreen.com

COMPASS EQUIPMENT INC.

4688 Pacific Heights RoadOroville, CA 95695530-533-7284530-533-8610

www.compassequip.com

Official dealer partner inTexas, Louisiana, Mississippi,

Oklahoma & Arkansas

Official dealer partner in Northern California.

POWER EQUIPMENT CO.500 E. 62nd Ave.Denver, CO 80216800-883-9284

www.power-equip.comLocations:Denver, CO

Colorado Springs, COGrand Junction, CO

Casper, WYAlbuquerque, NM

IROCK Launches New Web Site for Easier Use, Mobile AccessIROCK Crushers has launched a new

Web site. The new site, located atwww.irockcrushers.com, provides quickaccess to detailed product information tohelp customers make informed decisionsabout crushing and screening equipment.The mobile-friendly site also links cus-tomers to the latest technologies and industrynews. Visitors to www.irockcrushers.com can

easily sort product information by the type ofcrusher, screener or application. Each prod-uct page features typical applications anddetailed specifications including machineweight, engine type, processing capacitiesand stockpiling heights. Large photos andvideos of equipment in action are featuredthroughout the site, giving visitors the oppor-tunity to not only read about features andbenefits, but view them as well.

In addition to detailed product informa-tion and visuals, IROCK is using the newsite to keep current and potential customerswell informed on industry news and bestpractices.News stories and blog posts will be updat-

ed regularly with information to helpincrease profitability in industries such asaggregates, road building, mining, construc-tion and demolition, recycling, landscapingand mining. Visitors to www.irockcrushers.com can

quickly share info with colleagues, cus-tomers and others. Pictures, videos and bestpractices info can all be shared easily viaFacebook, Twitter and Google+. For more information, call 866/240-0201. (This story also can be found on


Would you like your company featured inConstruction Equipment Guide?

If so, please contact us at: [email protected]


DENVER HEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216888-271-3308

2259 Commercial Blvd.Colorado Springs, CO 80906

888-271-3308

2340 I-70 Frontage RoadGrand Junction, CO 81505

888-271-3308

2600 Center DriveMilliken, CO 80543888-271-3308

639 Kay Lee LaneDurango, CO 81301

888-271-3308

7854 Hutchins DriveCheyenne, WY 82007

888-271-3308

4428 E. Trent Ave.Spokane, WA 99212

800-541-0754www.modernmachinery.com

22431 83rd Ave. S.Kent, WA 98032800-669-2425

19444 Ivan Street SWRochester, WA 98579

800-304-4421

5241 N. E. 82nd Ave.Portland, OR 97220

800-950-7779

4610 Cloudburst WayEugene, OR 97402800-826-9811

101 International Dr.Missoula, MT 29808

800-332-1617

3155 Highway 93 S.Kalispell, MT 59901

800-434-4190

7850 S. Frontage Rd.Billings, MT 59101800-735-2589

www.powermotivecorp.com


Purpose-builtfrom the ground up byMaterial handlers from SENNEBOGEN – 44,000 lbs. to 750,000 lbs.

Simple design… Lift more. Move faster. Save fuel. Run longer. , 0 0 0 44 . , l0 0 0 0 75 7 o ts b l .sbl

S i m p l e d e

e s i g n … L i ft ft mor

re . Mov e faster.

. Sa v e f u e l . Ru n

n longer.

Titan Machinerywww.titanmachinery.com

Denver, CO303-286-7000

Fargo, ND701-237-3333

Omaha, NE402-733-3700

Sioux Falls, SD605-336-3434

Modern Machinerywww.modernmachinery.com

Spokane, WA800-541-0754

Kent, WA800-669-2425

Rochester, WA800-304-4421

Portland, OR800-950-7779

Eugene, OR800-826-9811

Boise, ID 800-221-5211

Pocatello, ID 800-829-4450

Missoula, MT800-332-1617

Kalispell, MT800-434-4190

Billings, MT 800-735-2589

Bane Machinery Inc.www.banemachinery.com

Dallas, TX214/352-2468

Fort Worth, TX817/847-5894

Waukesha-Pearce Industries, Inc.

Corporate Office: 12320 So. MainHouston, TX 77035

713/723-1050 • Fax: 713/551-0798www.wpi.com

Tomball, TX281/351-9016

Kilgore, TX903/984-2011

Port Arthur, TX409/721-5305

Corpus Christi, TX361/884-8275

Edinburg, TX956/386-0107

San Antonio, TX210/648-4444

Pflugerville, TX512/251-0013

Buffalo, TX903/322-7150


Lokotrack LT200HPcone plant

The Lokotrack® LT200HP™, designed for second-ary and tertiary crushing, combines high capacity, a large feed opening and a compact design. The LT200HP plant is built around the reliable Nordberg® HP200™ cone crusher, so you get high-quality end products that meet your speci-fications. And like all Lokotracks, you also get the heavy-duty construction and innovative design that make the LT200HP easy to operate and main-tain. Learn more by contacting your local Metso distributor today.

E-mail: [email protected]

We de� neperformancethe way you do.

CRISP INDUSTRIES, INC.323 Energy Way • Bridgeport, TX 76426

940-683-4070 • 800-315-0871 •

Fax: 940-683-2181

www.crispindustries.com [email protected] Texas 78155

830-625-6822

Seguin, TX 78155830-372-1110

COMPASS EQUIPMENT4688 Pacific Heights Rd. • Oroville, CA 95695

530-533-7284 • 530-533-8610 • Fax: 530-533-7657

www.compassequip.com CUTTING EDGE SUPPLY234 East O Street • Colton, CA 92324

800-949-9014 • Fax: 909-825-4569

Phoenix, AZ • 800-729-1473

N. Las Vegas, NV • 702-649-1303

WHEELER CRUSHING SYSTEMSSalt Lake City, UT • Hurricane, UT

Ogden, UT • Vernal, UT800-779-4450

www.wheelercat.com/crushing

WESTATEP.O. Box 50370 • Billings, MT 59105800-999-6676 • Fax: 406-373-6553

www.westate.com


SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive hardware needed

• No more rags stuffed into hoses

• No more messy plastic caps

• The ultimate contamination control tool

• One hand installation• Eliminate hydraulic oil spills & clean up

• Quick installation & ease of usage

• Safe for personnel & environment

• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualityRubber Tracks to fit over 3000 models of construction equip. PNEUMATICAND FLATPROOF SKIDSTEER TIRES also available. $95 Next day ship-ping to 23 states...........................................................................................Call

Summit Supply LLC888-888-1248 • [email protected] 9-10 TM

McLaren Rubber Tracks for Mini Excavators & TrackLoaders, The Most Trusted Brand in America Brings YouQuality Tracks for your Specific Make and Model

Call McLaren 888-492-4230 9 FS

ASPHALT EQUIPMENT

Asphalt Cutters

Attachments InternationalASPHALT CUTTERSSEVERE SERVICE

HIGH SPEEDASPHALT CUTTER

Skid Steers, TLB, Loaders,

Excavators

14 Models Available

''24-48 hour shipping''

Large Oder for RUSSIA #30 Extreme CuttersCancelled!

Price cut in half, Now-$1,999.00

Call 218-863-6444www.attachmentsintl.com

www.attachmentsusa.com

LOADERS

Wheel Loaders

2000 Komatsu WA250-3, Cab w/ AC, JRB QC,good condition, 8,200 hours....................................$47,500.

913-787-2371

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online searchable database

for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

CLASSIFIEDS


MOBILE OFFICE WITH WASHROOM | 12 X 36 ? C/W WASHROOM SELF CONTAINEDCONTACT: JERRY DOELLPHONE: 403-382-7908EMAIL: [email protected]––––––––––––––––––––––––––––––––MOTOR GRADER | LOOKING GRADER,AND EXCAVATORSCONTACT: MANSOORPHONE: +971508486871EMAIL: [email protected]––––––––––––––––––––––––––––––––BACKHOE | I AM LOOKING TO BUYCASE BACKHOE 2WD 580SK, 580L,580SL, 580M AND 580SM, SERIES I ANDII IF YOU HAVE ANY FOR SALE, PLEASESEND PHOTOS, SERIAL NUMBER ANDLOCATION. LOOKING FORWARD FORYOUR OFFERS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––CONSTRUCTION | WE WANT TO KNOWWHO OWNS MARSH BUGGIES, USEDMARSH BUGGIES AND WE PAY SEVER-AL $1, 000 FINDERS FEES IF THEIRINFO HELPS US FIND UNITS TO RENT,BUY OR SELL. PLEASE SEND WHATYOU HAVE.CONTACT: TYLER PALUMBOEMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADERS | I AM LOOKING TOBUY USED CATERPILLAR WHEELLOADERS 920, 926, 930, 936, 938F/G,950B/C/E/F, 966C/D/E/F/H, 980C/F AND988B. IF YOU HAVE ANY, PLEASE SENDPICTURES, SERIAL NUMBER, CONDI-TION, LOCATION AND FINAL OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]–––––––––––––––––––––––––––––––– KOMATSU 308 TRACK EXCAVATOR |LATER MODEL YEAR, UP TO 4000HOURS, NORTHEAST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY MANUALS | WE ARE LOOKINGTO PURCHASE NEW OR USED SERV-ICE, SHOP, PARTS, OPERATOR’S OROTHER MANUALS FOR EQUIPMENT OFALL SORTS, BUT NOT INCLUDEDTRUCKS AND VEHICLES. WE PREFERIN BULK, PERHAPS YOU HAVE COM-PUTERIZED YOUR SERVICE OR PARTSOPERATION AND YOU HAVE BOOKSOR MANUALS YOU NO LONGER NEED,OR INVENTORIES YOU HAVE NOTSOLD. PERHAPS AS A DISCONTINUEDPRODUCT LINE. WE WILL PURCHASEIN ANY USEABLE CONDITION IN ANYAMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––

SWEEPS 850J JOHN DEERE DOZERCONTACT: ANDYPHONE: 812-890-5631EMAIL: [email protected]––––––––––––––––––––––––––––––––480 BACKHOE | 480 USED BACKHOE,BETWEEN 8 AND 18 THOUSAND,CONTACT: GARY HICKSPHONE: 606-348-8647FAX: 606-348-4517EMAIL:[email protected]––––––––––––––––––––––––––––––––36" CLEAN OUT BUCKET NO TEETHFOR LB75 NEW HOLLAND BACK HOECONTACT: BILL RAWLINGSPHONE: 317 745 6185FAX: [email protected]:[email protected]––––––––––––––––––––––––––––––––NEEDED ALL THE TIME: EXCAVATORSBULLDOZERS GRADER LOADER USERUSA. PLEASE NOT NOT ADVERTISEDNO HACKER, THANKS AGAINCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 ORMOB 1 514 38 68975EMAIL:[email protected]––––––––––––––––––––––––––––––––DIESEL GENERATORS WITH/WITHOUTTRAILER.CONTACT: FELIX SANCHEZPHONE: (787) 415-9560EMAIL: [email protected]––––––––––––––––––––––––––––––––TROMMEL SCREEN (HERCULES ONLY) CONTACT: JIMPHONE: 870-834-1211FAX: 870-793-9305EMAIL:[email protected]––––––––––––––––––––––––––––––––TRUCKS | I AM LOOKING FOR A PACK-AGE DEAL ON HIGHWAY TRUCKS(FREIGHTLINER, INTERNATIONAL,VOLVO).YEAR OF MAKE 2009 TO 2011.HIGH MILES PREFERRED, WITH ORWITHOUT SLEEPER. NEED 35 TO 50UNITS. TRUCKS ARE FOR EXPORT,THEY MUST BE PRICED RIGHTCONTACT: SANTIAGOPHONE: 3055064263EMAIL: [email protected]––––––––––––––––––––––––––––––––MOTOR GRADER | I AM LOOKING TOBUY CAT MOTOR GRADER 12G, 14G,14H, 140G AND 140H , IF YOU HAVEANY GRADER FOR SALE PLEASEEMAIL ME PHOTOS, SERIAL NUMBERPRICE AND LOCATION, ONCE WE HAVEA DEAL WE GUARANTEE PAYMENT IN24 HRS.CONTACT: ABDAL SALEEM HAJIPHONE: 971558604929FAX: 96663312326EMAIL:[email protected]––––––––––––––––––––––––––––––––A TRUCK THAT CHANGE FARM TIRESCONTACT: THEORY MAYBINPHONE: 8039249682EMAIL: [email protected]––––––––––––––––––––––––––––––––

CRANE: 2030 TON ROUGH TERRAINCONTACT: SEAN LOCKYERPHONE: 7603223339EMAIL: [email protected]––––––––––––––––––––––––––––––––CONE CRUSHER COMPLETEHYDRAULIC WITH COOLENT, JAWCRUCHER 1200X800, VSI 96 , VSI 70,FEEDER 48"X18"CONTACT: RAID QASSARPHONE: 00962796668200EMAIL: [email protected]––––––––––––––––––––––––––––––––UPRIGHT OR SNORKEL SL30 PLAT-FORM LIFT (NO SCISSOR LIFTS)$15,000 OR LESS ACCORDING TOLOCATION AND CONDITION.CONTACT: BILL MYRICKPHONE: 479-451-1724FAX: 479-451-1967EMAIL:[email protected]––––––––––––––––––––––––––––––––BTI SH400R SHEARCONTACT: STEVE LANGLEPHONE: 605-660-9257EMAIL:[email protected]––––––––––––––––––––––––––––––––

LOOKING FOR CLAMSHELL BUCKETS,GRAPPLES, PILE DRIVERS/HAMMERSAND HOISTSCONTACT: GREG DUNNPHONE: 724-228-5560FAX: 724-228-8776EMAIL:[email protected]––––––––––––––––––––––––––––––––UL 142 TRANSPORTABLE FUEL TANK |WE HAVE TO PURCHASE A 300 GAL. UL142 DIESEL TRANSPORTABLE FUELTANK AS PER THE LONG BEACH FIREDEPT REQUEST. I WOULD NEED THESPECS FOR THIS UNIT WITH A FINALCOST TO SHIP TO OUR 1825 W. PIER DST, LONG BEACH CA. FACILITY. THELBFD HAS TO REVIEW AND APPROVETHIS UNIT BEFORE WE PURCHASE IT.MY HR: 5 AM TO 11 AM M THRU F *PSTTHANK YOU FOR YOUR TIME!CONTACT: PAUL PRIVITERAPHONE: 310-505-4235EMAIL:[email protected]––––––––––––––––––––––––––––––––CANICA 95 IMPACT CRUSHER | WANTTO BUY A 3 OR 4 SHOE TABLE SPECIFI-CALLY INTERNAL CONFIGURATION:VAULTED ANVIL RING ASSEMBLYCONTACT: JOHN RICHARDSPHONE: (406) 677-2600FAX: ((406) 677-2244EMAIL:[email protected]––––––––––––––––––––––––––––––––A BUCKET FOR CAT 994 P/N 257-3690DIMENSIONS: 2, 8 X 2, 5 X 6, 2 WEIGHT20 TONCONTACT: TESSY RAFFOPHONE: 305 798 6797EMAIL: [email protected]––––––––––––––––––––––––––––––––USED FIAT ALLIS MODEL 8084CONTACT: ROBERT GYGRYNUKPHONE: 302-398-3010FAX: 302-398-3010EMAIL:[email protected]––––––––––––––––––––––––––––––––

PLANETARY GEAR PART # 510783 FORLABOUNTY 1500R. CONTACT: ROBERT HARRELLPHONE: 609-561-7702––––––––––––––––––––––––––––––––1988 CAT 66CONTACT: ABDULLAHPHONE: 00966503598711_560685995FAX: 00966148312341EMAIL: [email protected]––––––––––––––––––––––––––––––––JB WATLINGTON | WALKING FLOORTRAILERPHONE: 4348226760EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D3AT D10 1998AND UP. USA ONLY. NOT ADVERTISED.CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––U1060808159 | I WANT TO BUY THISWELDING MACHINE ITS LOCATED INGEISMAR, LACONTACT: NAREN RATHODPHONE: 6203148200EMAIL: [email protected]––––––––––––––––––––––––––––––––MINI EXCAVATORS, SKIDSTEERS | IBUY AND SELL EQUIPMENT IN MEXICOI AM LOOKING TO BUY IT AT WHOLE-SALE PRICE, PREFER CAT, BOBCAT, TEREX, KUBOTA.CONTACT: GUSTAVO INZUNZAPHONE: 801-785-1060FAX: 801-7850947EMAIL:[email protected]––––––––––––––––––––––––––––––––OPEN TRAILER 5 TON FOR A SKIDSTEER TO MOVE FROM JOB SITECONTACT: WAYNE DINARDOPHONE: 732 899 9042FAX: 732 899 1532EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR A SELF-PROPELLED,TELESCOPIC MADILL 046 YARDER. CONTACT: GLENN RUSSELLPHONE: 360.314.7413FAX: 360.727.3222EMAIL:[email protected]––––––––––––––––––––––––––––––––

CAT 416D LOADER BACKHOE | LOOKING TO BUY CAT 416D OR SIMILAR, GOOD PRICE 2003-2009CONTACT: ALFREDO RAMIREZEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 325CL EXCAVATOR | LOOKINGFOR GOOD USED 325CL EXCAVATORYEARS RANGING FROM 2000 TO 2006CONTACT: SCOTT MILLERPHONE: 2172643391FAX: 2174655486EMAIL:[email protected]––––––––––––––––––––––––––––––––SKID STEER | LOOKING FOR 3 SKIDSTEERS 2 BIG ONES + 1 MEDIUM.WHOLESALE PRICES, EQUIPMENTFROM 1997 TO 2003. CONTACT: SANTIAGOPHONE: 3055064263EMAIL: [email protected]––––––––––––––––––––––––––––––––420D CAT BACKHOE | CAB DOOR LEFTSIDECONTACT: CHRIS STAHLHEBERPHONE: 5137264446FAX: 5137264600EMAIL:[email protected]––––––––––––––––––––––––––––––––USED 1170 CFM AND 300350 PSI INGERSOLL RAND XHP750 OR XHP1170CONTACT: BEN MOITAPHONE: 612 987 5712EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 977L | THIS CAT NEEDS TO BE INGREAT SHAPE..NO LEAKS ANDSTRONG UNDERCARRIAGE AS WELLAS MOTOR. PIN AND RAMS TIGHT. INEED TO BUY ON CONTRACT. CONTACT: JOHN VOSSPHONE: 641-660-1664EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A 120 SIZE EXCAVATORDEERE 490E, 120, KOBELCO 100, 120.PA OR OHIO ONLY. LESS THAN 7,000HOURS. EMAIL ONLYCONTACT: VITO PILOSIEMAIL: [email protected]––––––––––––––––––––––––––––––––VACUUM TRAILER | OLDER TRAILERWITH PONY MOTOR IF POSSIBLE. IF NOT WILL STILL CONSIDERCONTACT: MARTY MENZORPHONE: 7204012998EMAIL: [email protected]––––––––––––––––––––––––––––––––VOLVO 40E | PARTS AND SERVICEMANUALS FOR A 40E TRUCKS.CONTACT: JEFF RITTMERPHONE: 563-349-2969FAX: 563-659-2900EMAIL:[email protected]––––––––––––––––––––––––––––––––CNG STREET SWEEPERS | LOOKINGFOR CNG POWERED MUNICIPALSTREET SWEEPERSCONTACT: STEVE DICKSONPHONE: 562 923-5441FAX: 562 869-5943EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDRAULIC THUMB FOR CASE 580 KCONTACT: RON DELANEYPHONE: 860-274-1244EMAIL:[email protected] ––––––––––––––––––––––––––––––––

TRACKS FOR 350C JOHN DEERECONTACT: RICHARD SCHNEIDERPHONE: 715-762-4645EMAIL: [email protected]––––––––––––––––––––––––––––––––ENCLOSED UTILITY TRAILERSCONTACT: ANTONIO GRAJEDAPHONE: 952-693-1917EMAIL: [email protected]––––––––––––––––––––––––––––––––KUBOTA V1505CONTACT: JERMAINEPHONE: 661-431-6580EMAIL: [email protected]––––––––––––––––––––––––––––––––NEW HOLLAND/FORD TRACTORSCONTACT: TODD KINGEMAIL:[email protected]––––––––––––––––––––––––––––––––LONG REACH EXCAVATOR 80000 -90000 LBS, 3000 HRS OR LESSCONTACT: SHAWN ALEXANDERPHONE: 5599201825EMAIL:[email protected]––––––––––––––––––––––––––––––––BULLDOZER 2001 AND UP | NEED 12MONTHS BULLDOZER ALL SIZES FROMUSA NOT ADVERTISEDCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––DX1 ALTERNATORCONTACT: ALBERT ROBINSON {CON-TRACTOR}PHONE: CELL #459 854 9958 |EMAIL:[email protected]:[email protected]––––––––––––––––––––––––––––––––RUBBER TYRE PAVER CEDARAPID |USED CEDARAPID CR552 Y2004 UPVERY URGENT.CONTACT: ONGARD YIRUNSIRIPHONE: +66818145354FAX: +6623985393EMAIL:[email protected]––––––––––––––––––––––––––––––––KUBOTA, 80, 85 HORSE POWER, NAR-ROW GAUGE 49 INCHES TO 56. MAXI-MUM WIDE, TRACTOR FULLY WEIGHT-ED I WOULD NEED 2 OF THESE TRAC-TORSCONTACT: VICTOR TRENTADUEPHONE: 707-696-3176EMAIL: [email protected]––––––––––––––––––––––––––––––––URGENTLY NEED A QUOTATION FORTHE FOLLOWING NEW MACHINES: 1 XBOMAG MACHINE 1 X RUMMER(WORKER) 1 X COCRETE MIXERCONTACT: JEFFREY RAMAHLALEROAPHONE: 0820670333FAX: 0866272462EMAIL:[email protected]––––––––––––––––––––––––––––––––ANGLO EGYPTIAN TRADING CO | 100USED DEUTZ F2L511 & F2L912 DIESELENGINESCONTACT: ENG.: RAAFAT NAKHLAPHONE: 00202 25767724FAX: 00202 25774465EMAIL:[email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:

www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted


ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944�

• Manchester (Concord), NHSat., May 3, 2014For: Late Model AggregateEquipment & more

• Syracuse (Canastota), NYSun., May 4, 2014For: Lawn & Garden Tractors andmore

• Cleveland, OHSat., May 10, 2014For: Construction Equipment

• Central Square, NYSun., May 11, 2014For: Real Estate Auction

• Dallas, TXTues., May 13, 2014For: Late Model Rental FleetEquipment

• Kissimmee, FLWed., May 14, 2014For: Late Model Rental FleetConstruction & more

• Buffalo, NYSat., May 17, 2014For: Construction Equipment

• Middletown (Florida), NYSun., May 18, 2014For: Complete Liquidation of a FineRental Company

• Lima, PeruSat., May 24, 2014For: Late Model & New Rental FleetEquipment and more

• Chesapeake, VAThurs., May 29, 2014For: Cranes, Pile Driving Equipment& more

• Manassas, VAFri., May 30, 2014For: Construction Equipment/JobCompletion Auction

• Columbus, OHSat., May 31, 2014For: Job Completion Auction

• Lynchburg, VAWed., June 4, 2014For: Rental Fleet & ConstructionEquipment

• Queretaro, MexicoFri., June 6, 2014For: Late Model ConstructionEquipment

• Las Vegas, NVSat., June 7, 2014For: Rental Fleet Equipment, LargeConstruction & more

• Odessa, TXWed., June 11, 2014For: Construction Equipment

• Corpus Christi, TXThurs, June 12, 2014For: Rental Fleet Equipment

• Houston, TXTues, June 17, 2014For: Large Rental Fleet ConstructionEquipment

• Newark, NJSat., June 21, 2014For: Complete Liquidation RentalFleet Equipment

• Boston, MAJune 25-26, 2014For: 2 Day Auction “Building 19”

• Atlantic City, NJSat., June 28, 2014For: Construction Equipment

• Parkersburg, WVFri., July 11, 2014For: Real Estate & ContractorsAuction

• Parkersburg, WVSat., July 12, 2014For: Rare Vintage Cars

• Syracuse (Canastota), NYSat., July 19, 2014For: Construction Equipment & more

• Pittsburgh, PAFri., July 25, 2014For: Large Job Completion

RITCHIE BROS. AUCTIONEERSwww.rbauction.com402-421-2631

• Williston, NDMay 8, 2014

• Tipton, CAMay 14, 2014

• Forth Worth, TXMay 14-15, 2014

• Orlando, FLMay 15, 2014

• Pittsburgh, PAMay 20, 2014

• Pasco, WAMay 20, 2014

• Los Angeles, CAMay 21, 2014

• Chicago, ILMay 22, 2014

• Puente Hills, CAMay 22, 2014

• Hobbs, NMMay 29, 2014

• Chehalis, WAMay 30, 2014

• North East, MDJune 3, 2014

• Detroit, MIJune 5, 2014

• Nashville, TNJune 12, 2014

• Columbus, OHJune 18, 2014

• Manchester, NHJune 19, 2014

• Raleigh-Durham, NCJune 24, 2014

• Atlanta, GAJune 26, 2014

BAR NONE AUCTIONwww.barnoneauction.com866-372-1700�

• Sacramento, CASat., May 10, 2014For: Construction Equipment

• Phoenix, AZSat., May 17, 2014For: Construction Equipment

• Portland, ORThurs., May 29, 2014For: Construction Equipment

• San Bernardino, CASat., May 31, 2014For: Construction Equipment

BIG IRONwww.bigiron.com800-937-3558�

• ONLINE ONLYMay 7, 2014




• ONLINE ONLYJune 4, 2014




• ONLINE ONLYJuly 2, 2014





CAT AUCTION SERVICESwww.catauctions.com866-750-9432�

• Batavia, NYFri., May 16, 2014For: Construction Equipment

• Scranton, PAThurs., May 22, 2014For: Construction Equipment

• Minot, NDThurs., June 12, 2014For: Construction Equipment

• Winchester, VATues., June 24, 2014For: Construction Equipment

COMMONWEALTH OF PA www.auctionsbygov.com�866-469-7383

• ONLINETues., June 10, 2014For: PennDOT Heavy EquipmentAuction

DARELL DUNKLE & ASSOCIATESAUCTIONEERS INC.www.dunkleauctioneers.com�800-433-6670

• Harrison, MIThurs., May 8, 2014For: Heavy Equipment, LoggingEquipment, Truck, Trailers & more

DAVIS AUCTIONSwww.davisauctionsinc.com�203-758-4087

• Prospect, CTSat., June 14, 2014For: Construction Equipment

• Prospect, CTSat., September 20, 2014For: Construction Equipment

• Prospect, CTSat., December 13, 2014For: Construction Equipment

EQUIFY AUCTIONS, LLCwww.equifyauctions.com�903-873-6777

• Wills Point, TXThurs., May 8, 2014For: Spring Contractor’s PublicAuction

FREY & SONS, INC.www.freyandsons.com�419-455-3739

• Holland, OHThurs., May 22, 2014For: Construction Equipment

HENDERSON AUCTIONSwww.hendersonauctions.com225-686-2252

• Alice, TXThurs., May 22, 2014For: Heavy Oil Rigging &Transportation Liquidation

HILCO INDUSTRIAL, LLCwww.hilcoind.com�877-37-HILCO

• Travelers Rest, SCMay 20, 2014For: Paving trucks & related equip-ment

• Waterloo, Ontario, CanadaMay 21-22, 2014For: Masonry & ConstructionEquipment

HUNYADY AUCTION COMPANYwww.hunyady.com�800-233-6898

• Clearfield, PAWed., May 7, 2014For: Absolute Auction SurplusEquipment Liquidation

• Valencia, PAThurs., May 29, 2014For: Complete LiquidationConstruction Equipment

IRAY AUCTIONSwww.iraymn.com�320-968-7230

• Foley, MNFri., June 6, 2014For: Heavy Construction Equipment,Truck & Trailer

• Foley, MNFri., September 12, 2014For: Heavy Construction Equipment,Truck & Trailer

• Foley, MNFri., December 5, 2014For: Heavy Construction Equipment,Truck & Trailer

IRON PLANET AUCTIONSwww.ironplanet.com�888-433-5426

ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to place yourbid!








• ONLINE ONLYJune 26-27, 2014





J.J. KANE AUCTIONEERSwww.jjkane.com�855-GO2-KANE

• Rome, NYSat., May 3, 2014For: Construction Equipment

• Gary, INThurs., May 17, 2014For: Construction Equipment

• Portland, ORThurs., June 12, 2014For: Construction Equipment

• Dallas, TXThurs., June 19, 2014For: Construction Equipment

• West Palm Beach, FLThurs., June 21, 2014For: Construction Equipment

MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com�800-763-2728

• Brooklyn, MSMay 1-3, 2014For: Annual Spring ContractorsAuction

• Lugoff, SCWed., June 11, 2014For: One Owner Absolute Auction

• Easley, SCTues., June 24, 2014For: One Owner Absolute Auction

• Pelzer, SCWed., June 25, 2014For: Early Summer ContractorsAuction

MIEDEMA AUCTIONEERING & APPRAISALwww.1800lastbid.com�616-560-0839

• Kalamazoo, MITues., May 6, 2014For: Construction Equipment & more

• Wayland, MITues., May 6, 2014For: Construction Equipment

• Elkhorn, WITues., May 20, 2014For: Construction/Tool Equipment

MOTLEY’S AUCTION & REALTY GROUPwww.motleys.com�804-232-3300

• Richmond, VATues., May 20, 2014For: Construction Equipment &Trucks

PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com�860-642-4200

• Columbus, OHThurs., May 8, 2014For: Earthmoving, Site Development,Heavy Trucks & more

• North Haven, CTSat., May 17, 2014For: Complete Equipment DispersalAuction

• Wharton, NJSat., May 31, 2014For: Major Public EquipmentAuction

• North Franklin, CTFri., June 20, 2014For: Classic Car Auction

• North Franklin, CTJune 20-21, 2014For: 2 Day Major Public EquipmentAuction

RITCHASON AUCTIONEERS INC.www.ritchason.com�800-806-3395

• Lebanon, TNSat., June 14, 2014For: Construction Equipment

ROLLER AUCTIONEERSwww.rollerauction.com�866-515-1668

• Henderson, COWed., May 14, 2014For: Construction & ContractingEquipment

RTI AUCTIONS

www.tietsworth.com�585-243-1563

• Palmyra, NYSat., May 10, 2014For: Government Surplus Equipment

SALES AUCTION COMPANY, LLC

www.salesauctioncompany.com�860-627-7506

• Windsor Locks, CTSat., May 3, 2014For: Public Equipment Auction

STEFFES GROUP INC.

www.steffesgroup.com�701-237-9173

• ONLINE May 1 - 8, 2014For: Construction Equipment & more

• ONLINEMay 5 - 15, 2014For: Farm Retirement Auction

• South Heart, NDFri., May 30, 2014For: Farm Retirement Auction

• ONLINEMay 26 - June 4, 2014For: Farm Retirement Auction

• North DakotaThurs., June 5, 2014For: Excavating & Trucking

• ONLINEJune 1-10, 2014For: Construction, Trucks, RV’s,Vehicles & more

• West Fargo, NDWed., July 30, 2014For: Tractor, Loaders, Combines andmuch more!

WAYNE PIKE

AUCTION COMPANY

www.waynepikeauction.com763-389-5700

• Princeton, MNSat., June 14, 2014For: Heavy Equipment

• Princeton, MNSat., September 13, 2014For: Heavy Equipment

• Princeton, MNSat., December 6, 2014For: Heavy Equipment

WESTERN CONSTRUCTION

AUCTIONS INC.

www.wca-online.com�866-731-7760

• Perris, CAThurs., May 15, 2014For: Construction Equipment

YODER & FREY

AUCTIONEERS, INC.

www.yoderandfrey.com�419-865-3990

• Edgewater, FLFri., May 16, 2014For: Construction Equipment, Trucks& Trailers

• Darlington, PASat., May 31, 2014For: Construction & FarmEquipment, Trucks & Trailers

• Danville, VAThurs., June 19, 2014For: Construction Equipment, Trucks& Trailers

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com



Almost 4,000 Bidders Participate in Ritchie Bros. Auction

Jody (L) and Jan Cate of Cate Farms in Bangs,Texas, are thinking of bidding on this Cat D4C to use on their property.

Sandra and Lawrence Boquette, BoquetteSeafoods in Chauvin, La., are looking at thisLink-Belt 330LX to use around their docks.

Bryan Waddle, Cross Timbers Equipment in Denton,Texas, decided to make the trip to Houston to see thisCat D8R.

Mark Trahan of Denmar Equipment LLC inSulphur, La., takes a photo op with this CatD3C dozer.

Tommy Baker of TommyBaker Construction in

Humble, Texas, thinks hecan use this John Deere750J on one of his con-

struction sites.

Vesta and Jackie Murphey, CudaConstruction in Houston, Texas, have beenreally checking out this Cat D8N dozer.

Jeff Miller, Trophy Tractor in Irving, Texas,came a long way to check out this JohnDeere 350D excavator.

Dustin Logsdon, of United Equipment Co., in Turlock, Calif., may takethis John Deere 350D home when he leaves.

Registration keeps the Ritchie employees hopping.

More than 3,800 bidders participated onlineand in person at Ritchie Bros. Auctioneers’multi-million dollar unreserved public equip-

ment auction in Houston, Texas., on April 16 and 17.Bidders came from 59 countries, including 48 U.S.

states. More than 50 percent of the equipment was soldto out-of-state buyers, from as far away as Belgium,Guatemala and the United Arab Emirates. Online bid-ders purchased 44 percent of the equipment sold (bydollar value).

In total, more than 3,700 equipment items were soldin the auction, including 80 plus hydraulic excavators,50 plus cranes, a large selection of oilfield transporta-tion equipment and more.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG



Alex Lyon & Son Holds Late Model Rental Fleet Sale in Texas

Nearly the whole family came from Monterrey, Mexico, to see this Cat D6Tdozer. (L-R): Jose Ancer, Jose Ancer Jr., Hevnan SePulueda and his sonsPablo and Manuel of Servicios Contradiados Mas.

Jerry Moss, J.D.M. Services in Wilmer,Texas, is pretty interested in this Mackdump truck.

Keith Peuper of Proclaimco Service inConroe, Texas, thinks this Case 40 XT skidsteer just might be what he is looking for.

Brett Arbaugh of Coastal Power & Equipment in Pearland,Texas, is going to bid on this John Deere 310SG loader backhoe.

Stephen (L) and Joel Zupke, Zupke Sand andGravel, came all the way from Randalia,Iowa, to bid on this Case CX 130 excavator.

Lino Leon of North & South America HeavyEquipment in Corona, Calif., has just finishedchecking out this Case CX 210 LC excavator.

Chris Baumetre of C&J Generator Service in Humble, Texas,seems to be pretty taken with this Komatsu 300 LC excavator.

Mark Horton, Mark Horton Constructionin Pasadena, Texas, is going to bid on thisJohn Deere 350 D LC excavator.

Alex Lyon & Son held alate model constructionrental fleet auction on

April 17 in Magnolia, Texas.The auction featured construc-

tion equipment, support attach-ments, aerials, trailers and trucks.

For more information, visithttp://www.lyonauction.com/.

(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG


Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

Sales Managers & Auctioneers, Inc.

ALEX

LYON & SON

TUESDAY, MAY 13 @ 10:30 AM

NOTE: Selling in this sale will be a large quantity of rental fleet equipment from Ahern Rentals that is currently beingreplaced by new equipment in order to serve our loyal customers even better, along with several other rental fleetsincluding Hertz Equipment Rentals, Neff Rentals.

EARLY HILITES INCLUDE: MOTOR GRADER: 2008 Cat 140MVHP, 4 RUBBER TIRED LOADERS: (2)Cat 966G, (2) 2013 cat 924K (150 hrs.), CRAWLER TRACTOR: 2006 Cat D8T (ripper), 2 TRACTOR LOADERBACKHOES: 2007 Cat 420E (4x4), Case 580M (4x4), 4 LANDFILL COMPACTORS: (2) Cat 836, (2) Cat 826S,3 VIBRATORY ROLLERS: (3) 2006 IR SD70D, ASPHALT ROLLER: Cat CB434C, 5 TRENCH ROLLERS:Wacker RT820, (2) Wacker RT560, 2005-2004 Wacker RT56SC, 2 RUBBER TRACKED SKID STEERS: 2011 Cat259B-3, 2007 Bobcat T190, 11 SKID STEERS: 2010 Cat 246C, 2010 Cat 226B3, 2007 Bobcat S250, (5) 2007Bobcat S175, (2) 2007 Bobcat 463, 2006 Case 410, TRENCHER: Vermeer V4150, 35 TELESCOPIC FORK-LIFTS: (7) 2006-(3) 2005 JLG G9-43A (4x4), 2007 JLG G6-42A, (6) 2008- (3) 2007-2006 Dieci XRM732 (4x4),Dieci XRM732 (4x4), 2007 Dieci XRM6.221 (4x4), (7) 2008- (2) 2007 Dieci XRM621 (4x4), 2007 Dieci XRM621(4x4), (2) Skytrak 10054 (4x4), 2007 Skytrak 6036, 13 BOOM LIFTS: (3) 2006 JLG 660SJ (4x4), (4) 2006 JLG600S (4X4), (2) JLG 600S (4x4), JLG 600AJ, (2) JLG 400S (4x4), Genie S40 (4x4), 36 SCISSOR LIFTS: (2) 2007Skyjack SJ8243 (4x4), (2) Skyjack 4832, (2) Skyjack 4632, (20 Skyjack 3226, (8) 2005 Skyjack 3220, (13) Skyjack3219, (2) Genie AWP40S (2) 2007 Genie 3268RT, Genie IWP25S, 2007-2006 JLG 2630ES, AIR COMPRESSOR:2007 IR P185WJDR, 3 GENERATORS: Multiquip DCA150SSVUC, 2005 Multiquip DCA25SS12C, AirmanSDG25S, 3 WELDERS: 2007 Lincoln Vantage 500, 2006 Lincoln Vantage 500, Miller Big Blue 402, 6 LIGHTPLANTS: (2) 2005 Allmand Nite Lite Pro, (2) 2005 Allmand Nite Lite, Allmand Nite Lite, Wacker LTC4L, 5 BOOMTRUCKS: (5) 2006 Int’l. 4200 17 ½ ton (s/a), 2 WATER TRUCKS: (2) 2007 Int’l. 4200 (s/a), 2 TRUCK TRAC-TORS: 2007 Kenworth T800 (t/a), 2001 Peterbilt (t/a), PICKUP TRUCK: 2004 Ford F150XLT (4x4), FLATBEDTRAILER: 1992 Trailking TK70 (t/a), 5 UTILITY TRAILERS: (2) 2005 Best Trail 6x14UST (t/a), 2004 BestTrail 5x12UST (s/a), (2) 2006 Baretto E4x6TBT (s/a), TOWING DOLLIES: 2005 Best Trail KT200I, 9 UTILITYVEHICLES: (7) 2007 Kawasaki 3010T, (20 2007 Club Car XRT1550SE, PRESSURE WASHERS: (2) New EasyKleen Magnum Gold, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, NewVersatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech BrushGrapples, New Stump Buckets, SUPPORT EQUIPMENT: 2009 Husqvarna FS4800D Walk Behind Saw, 14in.General Use Diamond Blades, 7,000lb. Trailer Jack, (5)14in. General Use Diamond Blades, Target Concrete Grinder,(4) New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, NewMustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New Mustang CV3500Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4 packsof 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie 11218 SDS HammerDrills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft.Discharge Water Hoses, (4) New Stiff Neck Pintle Hitches.

DIRECTIONS: From North Las Vegas Airport: Left at N Rancho Dr./ US Rt 95 Business 2.5 miles, left at WBonanza Rd. ½ mile, site will be on right. From McCarran International Airport: follow signs for I-15/I-215/ LasVegas/ Henderson and merge onto S Airport Con/ Paradise Rd for 1.3 miles. Keep right at fork, follow signs for

I215 W/ Las Vegas and merge onto I-215 W for 1.5 miles. Take exit 12A – merge onto I-15 N toward Las Vegas 7.7miles, take exit 42A for Martin L King Blvd. for 1 mile, turn right, take first left onto W Bonanza Rd. Site will be

on left. Address: 1800 W Bonanza Road, Las Vegas, NV 89106.

PERMIT #: TCP-40806

LAS VEGAS,NEVADA

(Site to be at Ahern Equipment Rentals Yard.)

SATURDAY, JUNE 7 @ 9:30 AM

RENTALS - RENTALS - RENTALS!LAS VEGAS - LAS VEGAS - LAS VEGAS!

LATE MODEL CONSTRUCTION RENTAL FLEETEQUIPMENT, HYDRAULIC EXCAVATORS,

CRAWLER TRACTORS, LOADER BACKHOES,BOOM & SCISSOR LIFTS, SKID STEERS,

TRUCKS & TRAILERS, SUPPORT EQUIPMENT.

DALLAS(FT. WORTH), TEXAS

NOTE: Hertz Equipment is currently selling very good rental-readylate model construction & utility equipment, aerial lifts, forklifts,trucks & trailers at this sale.

HILITES INCLUDE: ARTICULATED HAUL TRUCK: VolvoA40D, 13 HYDRAULIC EXCAVATORS: 2006 Cat 325DL, JD 350D, 2013 JD 210GLC, (2) 2012 JD210GLC, 2007 Komatsu PC50, 2006 Hitachi ZX200LC, New Holland EC240LC, 2007 Case CS75SR, 2009-2007 Bobcat 331, 2007 Takeuchi TB135, 2007 Takeuchi TB016, MOTOR GRADERS: 2008 JD 672D(AWD), 2 RUBBER TIRED LOADERS: 2005 Cat 930G, Komatsu WA180-IL, CRAWLER TRACTOR:2008 JD 700JLGP, 12 TRACTOR LOADER BACKHOES: (2) 2008 Cat 420E (4x4) , (3) 2008-(2) 2007JD 310J (4x4), 2006 JD 310G (4x4), 2011 Bobcat CT122 (4x4), Case 480E, 5 ASPHALT ROLLERS: (4)2006 Cat CB634D, Cat CB534, 4 SKID STEERS: 2006 JD 328, 2008 Bobcat S175, Case SR250, Case1845C, TRENCHERS: 2008 EZ Trench EZ9100, ROUGH TERRAIN FORKLIFT: Harlo HF456B, 10SCISSOR LIFTS: (3) 2006 JLG 2630ES, 2007 JLG 2030ES, 2007 JLG 20MVL, 2007-2006 JLG 1930ES,2007 Genie GS2632, 2008 Genie AWP25S, 2006 Genie GS2032, 12 AIR COMPRESSORS: 2007-(3) 2006IR HP1600IQ, 2006 IR XP 750WCAT, 2007 IR XP 375WIR, IR 375, (3) 2006 IR P185WJD, IR 185, AtlasCopco 1600CFM, 17 GENERATORS: 2007 Multiquip DCA600, 2007 Multiquip DCA150, 2005 MultiquipDCA125, 2006 Multiquip DCA85USJ, 2007 Multiquip DCA70, 2006 Multiquip DCA45, (2) MultiquipDCA45-C, (6) Multiquip DCA25-C, 2007 IR G450, Cat XQ80-C, Cat XQ20-C, WELDER: 2007 MillerBig Blue 300D, 20 LIGHT PLANTS: (10) 2006 Magnum MLT4060, (4) 2006 Magnum MLT4200IMH,Magnum MLT3060, (5) 2008 Warren WCW204MH, 16 WATER PUMPS: 2007 Pioneer PP121, 2008Pioneer SC108L17, 2006 Pioneer PP88S12, (4) 2007-(2) 2006- (2) 2005 Pioneer PP66S12L, 2007 PioneerPP63C17L, 2006-2005 Pioneer PP44S10L, D&D Machine 400D, 2008 Powley Z901, LOADER LAND-SCAPE TRACTORS: JD 210LE, CONCRETE MIXER TRUCK: 1984 Int’l. F5074 (t/a), 3 WATERTRUCKS: 2001 Int’l. (s/a), 2000 Sterling (s/a), 1994 Freightliner FLD112 (s/a), TRUCK TRACTOR:2006 Int’l. 8600 (s/a), SERVICE TRUCK: 2004 FordF450, FLATBED TRAILER: 2003 Utility 53ft.(t/a),4 DETACHABLE GOOSENECK TRAILERS: (3) 2014 Witzco RG50 50 ton (tri.), 2006 Ledwell 35 ton(t/a), 3 EQUIPMENT TRAILERS: 2006 Ledwell 50 ton (tri.), 2006 Ledwell 35 ton (tri.), 1998 Ledwell4T48102 48ft. (t/a), TAGALONG TRAILER: 2005 Best TB102x18 3 ton, 2 DUMP TRAILERS: 2007-2006 EZ-Dumper EZ6812LP, FEED TRAILER: 2008 Ledwell 42 ft. (t/a), SUPPORT:2008 EZ- TrenchWalk-Behind, Stanley Breakers, ATTACHMENTS: Skid Steers: Smooth, Snow & Mulch Buckets, 60in.-78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New ForkFrames, New Versatech Brush Grapples, New Stump Buckets, LARGE QUANTITY OF SUPPORTEQUIPMENT: (4) New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New MustangM30 Core Drill, New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps,(3) New Mustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of14in. Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft.Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff Neck PintleHitches.

DIRECTIONS: From DFW Airport – Hwy 183 West to I-820 West to Exit 13 (Saginaw). Bear right ontoNorth 287 (Main St.) go approx. 6 miles turn right on Hick’s Field Road. Go 1/2 mile to sale site on right.

Address: 1815 Hicks Field Rd. East Fort Worth TX 76179. (Adjacent to JRP Trucking)

TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H LyonSALE SITE PHONE: (817) 847-2071, (863) 660-3613, SALE SITE FAX: (817) 847-2077

AUCTIONHertz Equipment Rentals

AHERNRENTALS

Hertz EquipmentRentals

Neff Rentals

Rental Fleet Equipment. Large Construction, Forklift, Aerial Lift,

Earthmoving Equipment Auction. Primarily Cat, JLG, Genie, Bobcat.

Very Large Quantities of Aerials & Forklifts

AUCTION


To view our Business Calendar online,

go to www.constructionequipmentguide.com.

APWA – American Public Works Association – NationalConference and TradeshowMay 4 thru 7, 2014 This national conference and tradeshow focuses on snow andice control and winter road maintenance, bringing togethermore than 1,500 snowfighters from cities and townships,county and rural streets divisions, and state and provincialdepartments of transportation. It’s four (4) days of educationand networking, featuring an exhibit floor with the newestequipment and products available, quality education sessions,and technical tours, and opportunities to exchange ideas withmanufacturers, distributors, consultants and other public worksprofessionals. Interested in exhibiting? Contact Diana Forbesat [email protected] or call 816/595-5242. For more infor-mation on this conference, go to: http://www.apwa.net/snowor contact Brenda Shaver at 816/595-5240 or email:[email protected].

Pennsylvania Independent Oil & Gas Association (PIOGA)presents…Eastern Oil & Gas Conference & Trade Show – May 13 & 14,2014Heinz Field, Pittsburgh, PAThe PIOGA is the principal non-profit trade association repre-senting Pennsylvania’s independent oil and natural gas pro-ducers, marketers, service companies and related businesses.The Eastern Oil & Gas Conference and Trade Show is the old-est event of its kind in the eastern U.S., organized by the oil andgas exploration and production industry for the E&P industry. For more information on this event, please contact PIOGA.Phone: 724/933-7306Email: [email protected]://www.pioga.org

OHIO DEPARTMENT OF TRANSPORTATIONN.E.O. SNOW & ICE TECHNOLOGIES WORKSHOPThursday, MAY 15, 2014 (8 AM to 3 PM)Solon Community Center, 35000 Portz Parkway, Solon, OH 44139Thank you for your interest in the Ninth Annual Northeast OhioSnow & Ice Technologies Workshop. 2014 Agenda:8 – 8:15 AMWelcome8:15 – 8:45 AMWeather Kick-off with Abner Johnson9 – 10 AMRoundtables City, State, Village & County10:10 – 11 AMRoundtables11 AM – 12 PMLunch12-12:50 PMRoundtables12:55 – 1:45 PMRoundtables2 – 3 PMWrap-up ChatIf you have any questions about the workshop, please contactCheryl Musarra at 440/337-1531 or [email protected].

Snow & Ice Management Association presents…17th Annual Snow & Ice SymposiumJune 18 thru 21, 2014Columbus, OHThe 2014 Symposium will include over 20 educational ses-sions (including two keynotes), a 100+ exhibit Trade ShowFloor, three snack & chat roundtable discussions, an off-siteBrine Making Workshop, receptions, networking, and more. Location: Greater Columbus Convention Center Host Hotel:Hyatt Regency Columbus, OHFor more information, visit www.sima.org/show or call (414)375-1940; email: [email protected].

Snow & Ice Management Association presents…17th Annual Snow & Ice SymposiumJune 18-21, 2014 / Columbus, OHThe 2014 Symposium will include over 20 educational ses-sions (including two keynotes), a 100+ exhibit Trade ShowFloor, three snack & chat roundtable discussions, an off-siteBrine Making Workshop, receptions, networking, and more.

Visit www.sima.org/show for details on every aspect of thisexciting show!Location: Greater Columbus Convention CenterHost Hotel: Hyatt Regency ColumbusExhibit Booths are still available, book now before they’re gone!Snow & Ice Management Association7670 N. Port Washington Road, Suite 105, Milwaukee, WIPhone: 414/375-1940 Website: [email protected]

PA GAS EXPO 2014JULY 30th, KOVALCHICK CONVENTION and ATHLETIC COMPLEXWe’ll see you this year for PA GAS EXPO 2014 on July 30,2014 from 9 AM until 3 PMThank you again for attending PA Gas Expo 2013. The Expoincluded seminars, demonstrations and an opportunity toengage in business-to-business networking. The PA Gas Expo2014 will be held at the Kovalchick Complex, 711 Pratt Drive,Indiana, PA 15705. For more information on this event, youmay call 724/471-1053.

Historical Construction Equipment Association 2014ConventionAugust 7th to 9th, 2014, in conjunction with the New YorkSteam Engine Association’s Pageant of Steam inCanandaigua, New York. Canandaigua is approximately 30 miles southeast ofRochester, 70 miles west of Syracuse, and 90 miles east ofBuffalo. Our last show in Canandaigua, in 2001, featured awonderful assortment of equipment, and we look forward tomore of the same this time.Working to preserve the history of the construction equipmentthat shaped our world…The Historical Construction Equipment Association is a non-profit organization dedicated to preserving for public educationthe history of the construction, dredging and surface miningequipment industries.HCEA International Convention and Old Equipment ExpositionThe HCEA holds one annual convention and old equipmentexposition each year. Somewhere in either the lower 48 orCanada, we bring members, local fans, exhibitors, merchan-dise retailers and, of course, a lot of working machines togeth-er for learn and share a bit of history. For more information on this event, please contact theAssociation at 419/352-5616 or go to [email protected].

Ohio Nursery & Landscape Association presents…NGLCOFIELD DAY, August 12, 2014, Perry, OHThe NGLCO Summer Field Day is a long-standing tradition forgreen industry professionals. Mark your calendar and attendthe 2014 event! The Nursery Growers of Lake County Ohio, Inc. was formed in1927 for ‘the improvement and trade education’ within theworld-famous region of Northeastern Ohio center of LakeCounty, Ohio. Our Association continues to help nursery andsupplier members address current issues and speak with onevoice, here in the “Heart of the Nursery Industry.” Contact theNGLCO with any questions you may have at 440/241-7969 orgo to [email protected] for more information.

SAVE THE DATE!American Public Works Association2014 International Public Works Congress and ExpositionAUGUST 17 – 20, 2014Metro Toronto Convention CentreToronto, Ontario APWA’s International Public Works Congress & Expositionattracts more than 5,000 attendees each year and excitementcontinues to grow as we gear up for Toronto in 2014. This isone event you can’t afford to miss! Prime locations are fillingup fast so don’t wait, call me directly at 703/706-8230 oremail at [email protected] to reserve your booth today. Formore general information on the above show, please contactAPWA Show Management at 800/687-7469 or 703/706-8230; email: [email protected]. Website:www.apwa.net.

COAL-GENAugust 20 to 22, 2014, Music City Center, Hall B, Nashville,Tennessee With over a decade of service to the coal sector, COAL-GEN isthe industry’s most dynamic event covering the latest topicsaffecting the design, development, upgrading, operation andmaintenance of coal-fueled power plants. With an anticipatedattendance of nearly 2,000 industry professionals, COAL-GENis the industry’s largest event focused on the solutions of todayand the technologies of tomorrow. The Benefits of AttendingCOAL-GEN 2014 include: Gain a better understanding of cur-rent and future issues affecting the coal industry. Be a part ofthe discussions affecting the design, development, upgrading,operation and maintenance of coal-fired power plants. Learnabout technical developments and how they impact your work;and network with thousands of industry professionals. EarnProfessional Development Hours in our Pre-ConferenceWorkshops. For COAL-GEN event information, contact JenniferLindsey at 918/832-9313 or email: [email protected].

BusinessCalendar


public auctionpreview dates 05.13.14 & 05.14.14 :: preview times 7:30am to 4:30pm

Follow us

sellers :: need cash?

live online bidding

multi-million dollar liquidation

866.731.7760

2001 New Holland LW170 Wheel Loader2003 John Deere 650H Crawler Tractor Ford L9000 Dump Truck2007 Freightliner Columbia Truck Tractor :: 1 of 4

2005 John Deere 744J Wheel Loader2003 Caterpillar 345BL Excavator 2008 Kenworth T800 Roll Off Truck2013 International 4300 1800 Gallon Tanker Truck

Lull 844-TT34 Forward Reach Forklift2001 Gradall 534B Forward Reach Forklift

2011 VacTron LP555SDT Vacuum Trailer2004 Peterbilt 379 Truck Tractor

Auctioneer Bond #137807

public auction

public auctionthur

public auctionsday ::thur

preview dates 05.13.14 & 05.14.14

public auction 05.15.14 ::sday ::

preview dates 05.13.14 & 05.14.14

public auction 8:30 am 05.15.14 ::

preview dates 05.13.14 & 05.14.14 :: preview times 7:30am to 4:30pm

public auction 8:30 am

preview times 7:30am to 4:30pm

w usolloF


Altered Feeder Streams, River Path to Present Challengesthey unbury it. Only then will theyfully understand how much workthere is to be done. And there areother considerations. “There are a couple of big chal-

lenges,” Phelps said. “There are abunch of small feeder streams. Allhave been altered and the path ofthe river has been altered. In addi-tion to having soil conditionschange, there’s lots of water here.What sort of culverts are we goingto put in? This is also flood coun-try. What highway replacementdesign … how do we have tochange the highway given theStillaguamish River is differentnow? The Stillaguamish River eastof the slide is now about 11 feethigher now than it was before theslide. If you are an engineer, youneed to know what is the waterdoing, what is the soil doing, whatpart of the road is still there? Wedon’t have that information yet.”If the road is okay, WSDOT

hopes to have one lane of StateRoute 530 open by fall. But if it’sbadly damaged, it could take

longer.“We’re going to determine the

scope of the work,” Phelps said.“We’re engaging families to seewhat their vision of the highway is.We need to get in there and do ourhomework, to say, here is what itwill take to open it in current spot.Here is how we are going to dealwith water, along with that willcome a cost and timeline. Rightnow there are too many unknownsto say how much it is going to costand when it is going to reopen.”The state also plans to reach out

to local contractors, and expectseverything will be competitivelybid. “This is probably the biggest

thing folks in the state ofWashington have had to face sinceMt. St. Helens erupted. It’s beenthe worst thing I’ve ever seen. Youhave to use your imaginationbecause you can’t believe anythingcould do that damage.”

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.) CEG

LANDSLIDE from page 28

The view of the hill side that gave way near SR 530.

California Adds Most NewConstruction Jobs in WestAfter Florida, California added the most newconstruction jobs for the year (37,100 jobs,5.9 percent), followed by Texas (17,100 jobs,2.8 percent) and Minnesota.Eleven states and the District of Columbia

shed construction jobs between March 2013and March 2014, while employment wasconstant in Alaska. The largest number oflosses occurred in New Jersey (minus 4,600,minus 3.4 percent), followed by Kentucky(minus 1,900 jobs, minus 2.8 percent) andWest Virginia (minus 1,700 jobs, minus 4.9percent). West Virginia had the highest per-centage decline in construction employment,followed by New Jersey and the District ofColumbia (minus 2.9 percent, minus 400jobs). Two dozen states and D.C. added jobsbetween February and March, led by Ohio(4,600 jobs, 2.5 percent), which reboundedfrom even greater job losses in the previous,winter-wracked month. North Dakota hadthe highest percentage increase (3.4 percent,1,100 jobs) for the month. Louisiana rankedsecond in the number and percentage ofmonthly job gains (4,300 jobs, 3.3 percent).Construction employment declined in 23

states and remained unchanged in Montana,

South Dakota and Wyoming betweenFebruary and March. Texas lost the most jobs(minus 5,300 jobs, minus 0.8 percent), fol-lowed by Illinois (minus 2,800, minus 1.4percent). New Mexico experienced the high-est monthly percentage decline (minus 4.2percent, minus 1,800 jobs), followed byAlaska (minus 2.9 percent, minus 500 jobs)and Kentucky (minus 2.2 percent, minus1,500 jobs).Association officials said that the construc-

tion industry is prepared to add many moreworkers but that training programs and otherinitiatives to draw workers into constructionneed to be beefed up. The association recent-ly unveiled a multi-point workforce develop-ment plan to address these needs.“With each passing month, it becomes

clearer that contractors in most states are hir-ing both experienced and new workers,” saidStephen E. Sandherr, the association’s chiefexecutive officer. “It is essential for federal,state and local officials to clear roadblocksand adopt policies that will attract moreworkers into the industry.”


JOBS from page 1

Leaders Call Economy ‘Fair’March. 2.9 percent believe business condi-tions will worsen, unchanged from the previ-ous month.• 37 percent of survey respondents believe

demand for leases and loans to fund capitalexpenditures (capex) will increase over thenext four months, up from 31.4 percent inMarch. 60 percent believe demand will“remain the same” during the same four-month time period, down from 62.9 percentthe previous month. 2.9 percent believedemand will decline, down from 5.7 percentwho believed so in March.• 28.6 percent of executives expect more

access to capital to fund equipment acquisi-tions over the next four months, a decreasefrom 31.4 percent in March. 71.4 percent ofsurvey respondents indicate they expect the“same” access to capital to fund business, upfrom 68.6 percent in March. No one expects“less” access to capital, unchanged from theprevious month. • When asked, 37 percent of the executives

reported they expect to hire more employeesover the next four months, a decrease from40 percent in March. 60 percent expect nochange in headcount over the next fourmonths, unchanged from last month. 2.9 per-cent expect fewer employees, up from no onewho expected fewer employees in March. ��• 2.9 percent of the leadership evaluates the

current U.S. economy as “excellent,” downfrom 5.7 percent last month. 91.4 percent ofthe leadership evaluates the current U.S.economy as “fair,” up from 88.6 percent lastmonth. 5.7 percent rate it as “poor,”unchanged from March.• 34.3 percent of the survey respondents

believe that U.S. economic conditions willget “better” over the next six months, anincrease from 31.4 percent who believed soin March. 62.9 percent of survey respondentsindicate they believe the U.S. economy will“stay the same” over the next six months, adecrease from 68.6 percent in March. 2.9percent believes economic conditions in theU.S. will worsen over the next six months, anincrease from no one who believed so lastmonth. ��• In April, 40 percent of respondents indi-

cate they believe their company will increasespending on business development activitiesduring the next six months, a decrease from45.7 percent in March. 60 percent believethere will be “no change” in business devel-opment spending, an increase from 54.3 per-cent last month. No one believes there willbe a decrease in spending, unchanged fromlast month. For more information, visit

www.LeaseFoundation.org.(This story also can be found on


FINANCE from page 1


Buy

Sell

Where online buyers & sellers find the best deals

Buy. Sell.Fast. Easy.


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ALEX LYON & SON

DALLAS TX / LAS VEGAS NV ......................................45

ALLU GROUP ........................................................................11

ARTIC SNOW & ICE CONTROL ..........................................10

BARGAINS..............................................................................38

CATERPILLAR INC ................................................................30

CEG SCALE MODELS ..........................................................12

CLASSIFIEDS ........................................................................38

CONSTRUCTION EQUIPMENT GUIDE

ONE BUY NATIONAL COVERAGE ..............................24

MOBILE APP PROMO ..................................................22

ATTACHMENTS PROMO ..............................................16

REACH YOUR MARKET ..............................................43

WANTED ........................................................................39

DOOSAN INFRACORE AMERICA CORP ............................20

DOOSAN PORTABLE POWER ............................................17

DYNAPAC ..............................................................................13

EQUIFY AUCTIONS LLC

WILLS POINT TX ..........................................................41

FAE USA INC............................................................................2

FELLING TRAILERS ..............................................................23

FLANGE LOCK ......................................................................38

FLECO ATTACHMENTS ........................................................11

FLUID CONTROL SERVICES ................................................2

GRINDERCRUSHERSCREEN.COM ....................................34

GROVE CRANE ....................................................................25

HENDRIX MACHINERY LLC ..................................................3

HERCULES SEALING PRODUCTS......................................10

HYDRAULICIRCUIT TECHNOLOGY ....................................11

IROCK CRUSHERS ..............................................................32

IRON PLANET........................................................................49

KAWASAKI CONSTRUCTION MACHINERY..........................7

KOMATSU AMERICA CORP ................................................18

KPI-JCI ....................................................................................35

LBX ........................................................................................26

METSO MINERAL SCREENING ..........................................33

METSO MINERALS CRUSHING ..........................................37

MIDCO DEMOLITION TOOL CO ..........................................52

MINNICH MANUFACTURING..................................................6

NORAM ..................................................................................14

PEMBERTON ........................................................................10

RANSOME EQUIPMENT SALES LLC ..................................39

RITCHIE BROS. AUCTIONEERS..........................................51

ROAD BUILDERS MACHINERY ..........................................5,6

ROLLER & ASSOCIATES AUCTIONEERS

HENDERSON CO ..........................................................46

SCHAEFER ENTERPRISES ................................................10

SENNEBOGEN ......................................................................36

SUPERIOR INDUSTRIES......................................................34

THE SCREEN MACHINE ......................................................32

WESTERN CONSTRUCTION AUCTIONS

PERRIS CA ....................................................................47

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


rbauction.com | 1.800.211.3983

Featured upcoming auctionsWilliston, ND May 8 Fort Worth, TX May 14–15 Tipton, CA May 14 Pasco, WA May 20 Los Angeles, CA May 21 Chicago, IL May 22 Puente Hills, CA May 22 Hobbs, NM May 29 Chehalis, WA May 30

Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online

Sell your equipmentCall today–any number of items accepted.

More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.

Featured items in North America625+ excavators405+ crawler tractors355+ wheel loaders185+ motor graders225+ loader backhoes220+ skid steer loaders160+ articulated dump trucks60+ cranes and much more

Unreserved public auctions

30,0 items

Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auctioneer James L.Valentine #15239, Auction Company Bond #0470724, Auctioneers: Trevor J. Moravec Bond # 0466225, Patrick J. Hicks Bond #0470727, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auctioneer: Greg Highsmith Bond # 0470728, Auction firm License # 444.000193, Auctioneer: Greg M Highsmith # 444.000865 *This is a limited time offer from Ritchie Bros. Financial Services. OAC. Terms and conditions apply.

G707 8J DEEREJOHN – 5 5OF3 3 8YY 8MAAY –ND,ONTWILLIS

T5 XLLTK05 7 7DEEREJ JOHN3315

0 2 –8 14–1Y AAYM – XX – TTX, HTRRTWOTRRTOF

C3 120L1OVLLVO– V3 20YY 20AAYM – WA, OCSAPPA

CJ LCG10 2E REEDNHOJ3 3 15

12 – 20FF 12 – 20O10 14–1YY 14–1AAYM – XX – TTX, HTRWOTROF

750 F1 14 – 20

L w 9X750 wL ON T97 1S073834

TBBTTEREX/ 1YY 1MAAY –CAA –,ONTTIPPT

OF2

B414 6 5 TERPILLARCAATERPILLAR – 5OF 20

YY 20AAYM – WA, OCSAPPA

oming pcued rred uateFNDon, tsliliWWi

TEP12 14 & 5 – 2020

sauctionoming 8May

388 3 T 4T 388 LLTIBRET w T F FT45 1005/ RDSUPERIOR/12Y MA AY– CA,S ANGELESOLO

Norin semited rred uateFFe625+ rstoaavcex

3 – 2001

Bid ▸

aicAmerth Nor

75 X750 F /DROF7 3 – 200 w/L4T B BTTEREXX B

1YY 1MAAY –CAA –,ONTTIPPT

eonfidenccith wBid price vserveror sidbm minimuNo

DPUENTE

TERPILLAR CA ATERPILLAR–9 OF5

sepric

REBUILD9 TIFIEDER C–N922Y MA AY– CA, HILLSENTE

NDon, tsliliWWiTXth, orWWortorF

CAon, TiptAWWA,cosPa

CAs, eleAngsoLIL, oaggohicC

CAs, lle HiuentPNMs, bbHo

AWWAs, liahehC

8May4–151yaM

41May02May

21y aM22May22May92May03May

625+ rstoaavcex405+ soractrtwler arc355+ sader lowheel185+ sadergror mot225+ shoekacbader lo220+ saderloeer tsid ks160+ ructmp dued atluticar60+ morh mucand sanerc

▸ ▸ ▸

SelC

MorVisiand

skrucemor

price vserveror sidbm minimuNo ablaivaing ancfin100% o tUp

onor son perin id band pectIns

equipmentr ouyyoulSelemsitofber mnuyan–yaodtlal

lyaidadded semite More t Visi omauction.crb auctionslalsee o t

s.tingslie ato-dp-tuand

sepricle

lineon

ed.eptcacems

auctions

om auction.crbAuction . Inca) (AmericsAuctioneers. oBrhie cRit

or evrTs: Auctioneer#0470724, Bond yanompCmith Highseg GrAuctioneer: #1539, ense Licaler De

* ancFins. oBrhie cRittcom rfer offe time ed limita sisThi

om | 11.39831.800.2701, # mith HighsM. yoregGrAuctioneer #225, ense LiclerkCAuction

#0470727, Bond skHicJ. kricatP0466225, # Bond ecvaMorJ. or Auctioneer: 444.000193, # ense Licfirm Auction 0470728, # Bond mith

.lyapponditionscand ermsTTermsC. AOs. eicvSeralianc

11.3983Auction#15239, alentine L.VsJameAuctioneer 701,

leehicVVehicor Mot1981, # ense LicyanompCAuction #0470727, 444.000865# mith HighsM eg GrAuctioneer:


Date post:	29-Mar-2016
Category:	Documents
Upload:	construction-equipment-guide
View:	245 times
Download:	5 times

West 09 2014

Documents