Date post: | 02-Apr-2016 |
Category: |
Documents |
Upload: | construction-equipment-guide |
View: | 259 times |
Download: | 0 times |
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® WesternEdition
$3.00
Bobcat Celebrates
Milestone...8
Ritchie Bros. Sale
Attracts 3,500...58
Inside
By Lori TobiasCEG CORRESPONDENT
For more than 10 years, engi-neers at the Oregon Department ofTransportation have tried to comeup with a solution to a congestedstretch of U.S. 101 in a historictourist area on the central OregonCoast. Shop owners feared widen-ing the two lane stretch wouldincrease traffic and further jeopard-ize pedestrians crossing the high-way to reach shops on both sides. There also was concern that
widening the road would harm thehistoric charm of the Nelscott
neighborhood, which features theNelscott Mercantile Center built in1927. Environmental issues pre-sented some challenges as well. Acreek and wetlands parallel the east
side of the highway while to thewest there is a tall, steep slope,home to several houses. But finally, the state and federal
governments and neighboring shop
owners were able to reach anagreement that ODOT believesthat should make everyone happy.“So far, everyone has been very
ODOT Reaches Solution for Historic U.S. 101 Alex Lyon & Son Hosts
Texas Sale...62
August 9, 2014 • Vol. IX • No.16 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910
www.constructionequipmentguide.com
The project involves about a 1 mi. (1.6 km) stretch ofhighway, bounded on both sides by about 20 businesses.When finished, the highway — a designated scenic byway — will feature two 12-ft. (3.6 m) lanes, a 14-ft. (4.6 m) median, 6 ft. (1.8 m) shoulders and 6 ft. sidewalks on each side.
see HIGHWAY page 60
Published Nationally
Construction employment expanded in 215metro areas, declined in 80 and was stagnant in44 between June 2013 and June 2014, accord-ing to a new analysis of federal employmentdata released July 30 by the Associated General
Contractors of America. Association officialsnoted that uncertainty about a range of federalinfrastructure and construction programs couldweigh on future growth for the sector.“Contractors have been expanding their work
force in about two-thirds of the country for sev-eral months in a row,” said Ken Simonson, theassociation’s chief economist. “Some metroareas are adding workers at a strong clip, but the
see EMPLOYMENT page 68
Employment Increases in Metro Areas Over Year
Wildlife Underpasses Save More Than AnimalsBy Lori TobiasCEG CORRESPONDENT
When officials with the Oregon Department of Transportationtalk about the two wildlife migration underpasses they recentlybuilt and a third proposed migration overpass, it tends to sound alittle touchy-feely, inspiring comments along the lines of “Aw,isn’t that sweet.” And it’s true, it does save wildlife. But that’s notthe only thing it saves.“The concept is protection of wildlife,” said Jay Davenport,
construction project manager of the Oregon Department ofTransportation. “But it is also for motorists. If you look at the costper incident in a motor vehicle/animal accident, it’s estimated tocost $750,000 in the long term effects of people who get killed incollisions. Is it saving wildlife or people? It is both.”The underpasses are located on Highway 97 near Lava Butte,
south of Bend. One is a wildlife only underpass, the other,designed for wildlife, with an additional lane open seasonally tovehicles.The underpasses are located on Highway 97 near Lava Butte, south of
Bend. see WILDLIFE page 22
Table of Contents ............4
Paving Section ..........27-35
Backhoes & AttachmentsSection ......................39-48
Auction Section ........56-69
Business Calendar ........57
Advertisers Index ..........70
Page 2 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Battle Creek, MI269.965.1269Byron Center, MI616.878.7450Kentwood, MI616.698.2960Lansing, MI517.272.5033Muskegon, MI231.798.8754New Hudson, MI248.356.5200Romulus, MI734.641.8238Saginaw, MI989.752.9400Sterling Hts, MI586.977.6000Traverse, MI231.943.3700Wixom, MI248.449.6700Wixom, MI(Cons. Division)248.356.5200Zeeland, MI616.748.4108
Alsip, IL708.389.7700East Peoria, IL309.694.4455Rockford, IL815.227.0555Springfield, IL217.789.0351Villa Park, IL630.530.7600
Buford, GA678.318.9500Forest Park, GA770.319.0074Savannah, GA912.964.8079
Asheville, NC828.687.0620Charlotte, NC704.596.8283Greenville, NC252.754.5280Raleigh, NC919.661.8710Bismarck, ND701.250.4882Fargo, ND701.271.2360Minot, ND701.250.4882
Charleston, SC843.414.1120Columbia, SC803.791.0740Piedmont, SC864.704.1060
Chattanooga, TN423.308.7940Knoxville, TN865.525.1845
Evansville, IN812.867.6661Fort Wayne, IN260.482.3681Indianapolis, IN317.247.9125Corbin, KY606.528.9440Louisville, KY502.456.4050Prestonsburg, KY606.874.2104St. Louis, MO314.487.8925
McALLISTEREQUIPMENT CO.
Contact your local dealer:
Volvo Construction Equipment
* Ask about our Fuel Efficiency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.
YOU CHOSE GUARANTEED* FUEL EFFICIENCYWITH EXCEPTIONAL DEALER SUPPORT.
Smart Works.
POWER EQUIPMENTCOMPANYwww.power-equip.com
500 E. 62nd Ave.Denver, CO 80216303-288-6801Fax: 303-288-6809
2329 River RoadGrand Junction, CO 81505970-243-0722Fax: 970-243-0726
2940 E. Las Vegas St.Colorado Springs, CO80906719-392-1155Fax: 719-390-9604
8806 E. US Hwy. 34Johnstown, CO 80534970-669-6209Fax: 970-669-6280
ARNOLD MACHINERY CO.www.arnoldmachinery.com
2975 West 2100 SouthSalt Lake City, UT 84119801-972-4000Fax: 801-975-9434
3330 N. Yellowstone Hwy.Idaho Falls, ID 83401208-523-0822Fax: 208-523-9918
300 East Overland Rd.Meridian, ID 83642208-887-6000Fax: 208-887-6013
464 Washington St. SouthTwin Falls, ID 83301208-733-1715Fax: 208-734-6924
1650 East Greg St.Sparks, NV 89431775-356-1511Fax: 775-356-0517
4136 Donovan WayLas Vegas, NV 89030702-642-9000Fax: 702-642-8808
4323 East Winslow Ave.Phoenix, AZ 85040602-414-1900Fax: 602-414-1904
3350 East Gas Rd.Tucson, AZ 85714520-294-7677Fax: 520-294-7670
ROMCO EQUIPMENT CO.www.romco.com
5151 Cash RoadDallas, TX 75247214-819-4100Fax: 214-819-4102
Austin1150 Old W. Settlers Blvd.Round Rock, TX 75681512-388-2529877-851-1026Fax: 512-388-1781
Buffalo7387 Hwy. 164Buffalo, TX 75831903-322-5602Fax: 903-322-5605
Carmine17391 US Hwy. 290 WestCarmine, TX 78932979-278-3570Fax: 979-278-3573
Dallas3900 HalifaxDallas, TX 75247214-819-4100800-227-6626Fax: 214-819-4102
Ft. Worth1350 N. E. Loop 820Ft. Worth, TX 76106817-626-2288866-966-4602Fax: 817-626-8983
Houston8450 Breen Dr.Houston, TX 77064713-937-3005800-865-6998Fax: 713-937-7541
Longview2116 E. Loop 281Longview, TX 75605903-758-5576Fax: 903-758-3079
Rio Grande Valley312 Park St.Mercedes, TX 78570956-565-0100Fax: 956-565-1765
San Antonio1042 S. E. Loop 410San Antonio, TX 78220210-648-4600800-966-4601Fax: 210-648-1282
ROL Remote OilfieldLocation3610 Interstate 37Three Rivers, TX 78071361-254-2317
Contact your local dealer:
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 3
2005 Gradall G6-42P, Stk#: 9149, 6,000 lbs., 42ft., 4WD, 4WS, 3,664 hrs., Hyd. Self LevelingSystem, 48" Forks, 50" Tilt Frame, 13.00x24Foam Filled Tires, 4 Cyl. JD Eng ..........$29,500
2006 John Deere 550J, Stk#: 9432, OROPS,Eng. Encl., 6 Way Blade ......................$42,500
2008 ASV PT100, Stk#: 9456, EROPS, A/C,1,276 hrs., 72" Bucket, Aux. Hyd., 18" RubberTracks, 4 Cyl. Perkins Eng....................$34,500
2013 Cat 320E LRR, Stk#: 9243, EROPS, A/C,FM Stereo, 1,290 hrs., 80% U/C, 22" Bucket, 31"Pads, 10' 5" Wide ..............................$169,500
2008 Broce KR350, Stk#: 8809, EROPS, A/C,1,855 hrs., 8 ft. Broom, 90" Blade, Air Tires, 4Cyl. Kubota Eng....................................$29,500
2003 JLG 600S, Stk#: 9236, 500 lbs., 60 ft.,5,040 hrs., 4WD, 15x19.5, Tires, 4 Cyl. DeutzDiesel Eng ............................................$29,500
2006 Gehl RS8-42, Stk#: 9324, 8,000 lbs., 42Ft., 4WD, 4WS, 4,191 hrs., 48" Forks, 66" Frame,13.00x24 Foam Filled Tires, Hyd. Self LevelingSystem, 4 Cyl. JD Eng..........................$29,500
2006 Cat D6R III XL, Stk#: 9113, EROPS, A/C,Sweeps, Rear Screen, Angle Blade, 6,078 hrs.,80% U/C, 24" Pads, 10' 8" Wide ........$129,500
2007 JLG 3394RT, Stk#: 9441, 2,250 lbs., 33 ft.,4WD, 1,693 hrs., 82 hp, 7' Wx12' 10" LPlatform, 33x15.50x16.5 Tires, Gas Eng$16,500
2005 Terex GTH1056C, Stk#: 8914, 10,000 lbs.,56 ft., 4WD, 4WS, 6,485 hrs., Outriggers, 48"Forks, 50" Tilt Frame, Hyd. Self LevelingSystem, 14.00x24 Foam Filled Tires, 4 Cyl. JDEng ......................................................$39,500
2011 Cat 259B3, Stk#: 9428, EROPS, A/C,1,347 hrs., 73" bucket, Aux. Hyd., 16" RubberTracks, 4 Cyl. Cat Eng ..........................$38,500
2007 Ingersoll-Rand SD77DX, Stk#: #9382, 66"Smooth Drum, 275 hrs., 14x9x24 Tires, 4 Cyl.Cummins Eng., 9' 4" Height ................$61,500
2008 Genie GTH844, Stk#: 8165, OROPS,8,000 lbs., 44 ft., 4,653 hrs., 4WD, 4WS, 60"Forks, 52" Frame, 13.00x24 Hard Rubber Tires,4 Cyl. JD Eng........................................$34,500
2009 Volvo G930, Stk: #9246, EROPS, A/C, FMStereo, 5,505 hrs., 14 ft. Blade, Rear Ripper,14.00x24 Tires, 10' 9" Height, 8 ft. Wide, 6 Cyl.Volvo Eng ............................................$119,500
2007 Gehl RS5-34, Stk#: 9231, 5,000 lbs., 34 ft.,2,100 hrs., 4WD, 48" Forks, 48" Tilt Frame, Hyd.Self Leveling System, 15x19.5 Foam Filled Tires,4 Cyl JD Eng ........................................$29,500
2011 Cat D3K LGP, Stk#: 9408, EROPS, A/C, 6Way Blade, 395 hrs., 25" Pads, 10' 4' Wide ....................................................................$86,500
2006 New Holland LV80, Stk#: 9365, OROPS,154 hrs., 4WD, 7 ft. Box Blade w/Scarifiers &Rippers, 12x16.5 Front Tires, 17.5Lx24 RearTires, 4 Cyl. CNH Eng................................$36,500
2005 John Deere 700J LGP, Stk#: HR-371,OROPS, Sweeps, Screens, 6 Way Blade, 2,665hrs., 80% U/C, 32" Pads, 10' 8" Blade..$62,500
2011 John Deere 650J LT, Stk#: HR-88,OROPS, Forestry Package, 6 Way Blade, 80%U/C, 2,453 hrs., Ripper Valve, 18" Pads, Height9' 5", Width 8' 9', Width Track to Track 6' 7" ..................................................................$79,500
2007 John Deere 310J, Stk#: 9464, OROPS,4WD, 4,063 hrs., 24" Quick Connect Bucket, Aux.Hyd., 2 Stick Controls ..........................$39,500
2012 John Deere 210G LC, Stk#: 9418, EROPS,A/C, FM Stereo, 2,879 hrs., 42" Bucket, 32" Pads,10' 6" Wide ............................................$132,500
2012 John Deere 770G, Stk#: 9423, EROPS,A/C, FM Stereo, 2,911 hrs., 14 ft. M/B, Ripper,10' 6" Height ......................................$189,500
2005 Gradall 534D9, Stk#: 9487, 9,000 lbs., 45ft., 4,238 hrs., 4WD, 48" Forks, 68" Tilt Frame,13.00x24 Foam Filled Tires, Hyd. Self LevelingSystem, 4 Cyl. JD Eng..........................$29,500
2006 John Deere 700J LGP, Stk#: HR-364,EROPS, A/C, Sweeps, Rear & Side Screens, 6 WayBlade, 6,062 hrs., 30" Pads, 11 ft. Wide $65,000
2006 Lull 944E-42, Stk#: 9302, 9,000 lbs., 42ft., 5,351 hrs., 4WD, 4WS, 48" Forks, 48" TiltFrame, Hyd. Leveling System, 15.5x25 FoamFilled Tires, 4 Cyl. Cummins Eng..........$34,500
2013 Cat 924K, Stk#: 9473, EROPS, A/C, FMStereo, 241 hrs., 8' 4" Bucket, 20.5x25 Tires, 6Cyl. Cat Eng., 11' 4" Height ................$145,500
2004 Cat D6N LGP, Stk#: 9474, EROPS, A/C, FMStereo, 6 Way Blade, 12,619 hrs., 34" Pads, 13'4" Wide ................................................$69,500
2005 Cat CS533E, Stk#: 9352, 84" SingleSmooth Drum Vib., 23.1x26 Tires, 4 Cyl. CatEng ......................................................$72,500
2002 JLG G9-43A, Stk#: 8879, 9,000 lbs., 43 ft.,5,262 hrs., 4WD, 60" Forks, 74" Frame, 13.00x24Foam Filled Tires, 4 Cyl. JD Eng ..........$34,500
2011 Cat 416E ST, Stk#: 9477, EROPS, A/C,4WD, 494 hrs., Aux. Hyd., 24" Bucket, 2 StickControls, 12.5x80-18 Front Tires, 19.5Lx24 RearTires ....................................................$69,500
2007 Cat 420E ST, Stk#: 9380, OROPS, 4WD,3,376 hrs., Pilot Controls, Extendahoe, 24"Bucket, 12.5x80x19 Front Tires, 19.5Lx24 RearTires ......................................................$46,500
2005 Cat D5G LGP, Stk#: 9463, EROPS, A/C,FM Stereo, Sweeps, Rear & Side Screens, 6Way Blade, 3,252 hrs., 26" Pads, 10' 7" Wide..................................................................$52,500
2008 Cat D6T XW, Stk#: 8931, EROPS, A/C,Heat, Twin Tilt Angle Blade, 4,890 hrs., 30" Pads,Allid H6G Winch s# F1489071, 14' 8" Blade ..................................................................$189,500
"In Business for over 32 Years"www.hendrixmachineryllc.com
1-936-327-5430 • Email: [email protected] Se HablaEspañol
2010 Cat D6K LGP, Stk#: 9383, EROPS, A/C,Sweeps, Rear Screen, 6 Way Blade, 3,950 hrs.,PA50-82VE Winch s#0802540, 30" Pads, 11 ft.Wide.................................................. $129,500
2006 Skytrak 6042, Stk#: 9266, 6,000 lbs., 42Ft., 2,320 hrs., 4WD, 4WS, 48" Forks, 48" Frame,Aux. Hyd., 13.00x24 Foam Filled Tires, Hyd. SelfLeveling System, 4 Cyl. Cummins Eng...$34,500
1999 Cat 140H, Stk#: 9406, EROPS, A/C, FMStereo, 901 hrs., (old mtr 11,880 hrs.) 14 ft.M/B, Scarifier, 14.00Rx24 Tires, 10' 6" Height,8ft. Wide ............................................$119,500
2011 Cat D3K XL, Stk#: 9374, EROPS, A/C,Sweeps, Rear Screen, 6 Way Blade, 4,396 hrs.,80% U/C, 16" Pads, 4 Cyl. Cat Eng., 9' 6" Wide ..............................................................$69,500
Page 4 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment GuideLtd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes toConstruction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S.Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includingframing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, let-ters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subjectto Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarilyreflect the policy or opinions of this publication.Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsiblefor clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisementsare not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effortis taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
SPECIAL SECTION39 BACKHOES & ATTACHMENTS
Be sure to check out this special section!
Keep up to date with the latest information on backhoes and attachments.
FEATURES8 CEREMONY MARKS PRODUCTION OF ONE
MILLION BOBCAT LOADERS
Bobcat Company marked this tremendous milestone with a formal ceremony on
July 12, sharing the occasion with its valued employees and the community of
Gwinner, N.D., home to Bobcat’s primary production facility.
9 CONCRETE BRIDGE DESIGN SURVIVES SERIES
OF TESTSA 52-ton (47 t) concrete bridge survived a series of 10 earthquakes in the first
multiple-shake-table experiment at the University of Nevada’s new Earthquake
Engineering Lab in Reno.
10 MIDCO DEMOLITION TOOL TO CO-SPONSOR
‘OLD STEWBALL’Joining with Dallas, Texas-based USO and dealer Six and Mango of Grand Prairie,
Texas, Midco Demolition Tool will help bring a 1957 Chevy named “Old Stewball”
out of retirement for the race, which will be held from Aug. 9 to 15.
14 4 RIVERS WELCOMES NEW HIRES BRATTON,
THORNTON TO TEAMTerri Thornton has been welcomed as the general parts manager of the
construction division and Danny Bratton has now been hired as the Colorado
Springs store manager.
18 MACK EXPANDS CUSTOMER SUPPORT NETWORK
Mack Trucks recently announced further investment and growth in its extensive
customer support network with a new dealership in Cotulla, Texas, scheduled to
open late August.
24 LIUGONG NORTH AMERICA WELCOMES
DOUGLAS LAKELiuGong’s full line product offering will allow Douglas Lake to have more productsavailable to supply a broader section of the market.
24 WESTERN CONSTRUCTION GROUP PROMOTES
TRIPP TO MANAGERWestern Construction Group has promoted Mike Tripp of Blaine, Minn., to branchmanager of the Western Waterproofing Co. branch in Minneapolis.
50 EQUIPMENT LEASING, FINANCE CONFIDENCE
REMAINS STEADYWhen asked to assess their business conditions over the next four months, 28.6percent of executives responding said they believe business conditions will improveover the next four months, up from 23.5 percent in June.
58 MORE THAN 3,600 PARTICIPATE IN RITCHIE
BROS. AUCTIONMore than 3,600 bidders participated online and in person at Ritchie Bros.Auctioneers’s $49 million unreserved public equipment auction in Fort Worth,Texas, July 23 to 24.
62 ALEX LYON & SON HOLDS LATE MODEL RENTAL
FLEET AUCTIONThe auction featured late model rental fleet equipment from several nationalrental fleets, including United Rentals and Hertz Equipment Rentals.
EQUIPMENT27 BAGELA 10,000 Asphalt Recycler
32 WEILER W730A Road Widener
34 HAMM GRW 280i Series of Pneumatic Compactors
DEPARTMENTS48 CLASSIFIEDS
56 COMING AUCTIONS
57 BUSINESS CALENDAR
WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii
• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming
Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900
Toll Free 800/523-2200 Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail [email protected]
Advertising e-mail [email protected]
For advertising rates: Contact Edwin M. McKeon Jr.National Sales Manager215/885-2900
Toll Free 800/523-2200Fax 215/885-2910
e-mail [email protected]
Contact Dale Agnew• Arizona • Colorado • New Mexico • Oklahoma
• Texas • Wyoming
Toll Free 877/877-4997 Fax 972/695-6049
e-mail [email protected]
Contact Frank Strazzulla• Alaska • California • Hawaii • Nevada • Oregon• Utah • Washington
949/459-1767Fax 949/203-2859
e-mail [email protected]
Contact Patrick Kiel• Idaho • Montana
Toll Free 866/413-4265Fax 952/353-2750
e-mail [email protected]
Mobile LinkedIn Facebook Twitter YouTube
To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com
IN THIS ISSUE588 62
®
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 5
2004 Komatsu PC200LC-7: #81536, Cab/AC,31.5” Tracks, 9’ 7” Arm, Hyd Thumb, 4,800 hrs....................................................................$119,500
2001 Komatsu PC300LC-6: #91913, Cab/AC, 13’Arm, JRB QC, 10,550 hrs ........................$69,500
2004 Komatsu PC220LC-7: #91952, Cab/AC,31.5” Tracks, 11’ 6” Arm, QC, Aux Hyd, 7,600 hrs..................................................................$99,500
2007 Komatsu PC138USLC-2E0: #82142, Cab/AC,Roadliners, Hyd Thumb, 3,100 hrs ..........$89,500
2001 Komatsu PC138US-2: #80876, Cab/AC, 20”Tracks, 8’ 6” Arm, 4,500 hrs ....................$59,500
2007 Komatsu PC78MR-6: #81694, Cab/AC,Rubber Tracks, Blade, Aux Hyd, 3,650 hrs$54,500
2000 Komatsu PC78US-5: #82107, Cab, 17.5”Tracks, 5’ Arm, 6,100 hrs ........................$39,500
2007 Komatsu PC300LC-8: #81926, Cab/AC, 10’Arm, Rear Camera, 6,800 hrs ................$149,500
2002 Komatsu PC95R-2: #50051, Cab/Heat, 20”Tracks, Aux Hyd, Blade, 1,850 hrs ..........$69,500
2004 Komatsu PC160LC-7: #81899, Cab/AC, AuxHyd, 5,100 hrs ..........................................$84,500
2007 Komatsu PC220LC-8: #81987, Cab/AC, 28”Tracks, 10’ Arm, Hyd Thumb, 6,300 hrs$112,500
2005 Komatsu PC400LC-7: #92032, Cab/AC,35.5” Tracks, 11’ Arm, JRB QC, 10,450 hrs ............................................................................$98,500
Call Doug / Sam:
(866) 485-7180
Page 6 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CALL FOR DEMO AND PRICING
Looking for power?
Hyundai machines come standard with the industry’s best warranty. That’s the power of reliability, the key to your long-term success.
Learn more at hceamericas.com.
CALIFORNIAMecoM equipMent
Stockton, CA 209-466-5135
HeAVY equipMent SALeS
Corona, CA 951-674-9999Pacoima, CA818-834-0102
NEW MEXICO ciSco FoRD equipMent
www.cisco-eq.com
Artesia, NM575-748-1314
TEXASciSco FoRD equipMentwww.cisco-eq.com
520 SE Loop 338Odessa, TX 79762432-550-9181Fax: 432-367-9335Lubbock, TX806-745-9595San Angelo, TX325-653-2121
FouR SeASonS equipMent
Dallas, TX 214-388-1700Houston, TX 281-807-9777
WASHINGTONJet citY equipMent
Oak Harbor, WA 360-675-4441North Seattle, WA360-651-9079Wenatchee, WA509-888-8181
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 7
The world’s safest Skid Steer is now available with DOUBLE the standard warranty
giving you 4 years peace of mind. Or, if you prefer, 4 years 0% APR and 4 months
with NO payments. It’s your choice, but only until September 30, 2014. Put a JCB
Skid Steer or Compact Track Loader to work today—giving you more productivity,
greater fuel efficiency and the industry’s best operator visibility.*
SEE YOUR TEXAS JCB DEALER FOR DETAILS.
CONSTRUCTION EQUIPMENT
SAFETY FIRST.THEN PEACE OF MIND.
TO TAKE ADVANTAGE OF THIS JCB SK ID STEER OFFER V IS IT
WWW.JCBPROMO.COM/WARRANTYOR CALL
888-418-6678.
*The offer for FREE JCB Full Coverage Warranty is valid for customers purchasing any new Skid Steer and/or Compact Track Loader from participating authorized JCB Dealers. The JCB Full Coverage Warranty protects eligible equipment for an extended hourly coverage period measured from zero clock hours to 4,000 clock hours, up to a maximum of four (4) years from new, providing a machine is serviced at an authorized JCB Dealer. Finance offer subject to credit approval. JCB reserves the right to withdraw, alter or decline this offer without prior notice. See your local authorized JCB Dealer for additional terms and conditions. Offer valid through September 30, 2014.
FULL COVERAGE
WARRANTY*4 YEARYEARS 0% APR*
MONTHS NO PAYMENTS*
WITH4 4OR
www.jcb.com
Page 8 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ceremony Marks Production of One Million Bobcat LoadersProducing one million Bobcat loaders is
not only an unparalleled industry achieve-ment that has impacted the livelihood ofcompact equipment users worldwide italso has touched the lives of thousandsmore who have designed, built and backedgenerations of the most popular compactloaders for nearly 60 years. Bobcat Company marked this tremen-
dous milestone with a formal ceremony onJuly 12, sharing the occasion with its val-ued employees and the community ofGwinner, N.D., home to Bobcat’s primaryproduction facility. The company also cel-ebrated with family members of thosewho invented the original loader, perfect-ed the design, brought it to market and cre-ated the brand five decades ago. Past orga-nizational leaders and hundreds of otherswho have been part of the Bobcat successstory also were present at the event.The ceremony was held at the Gwinner
factory and featured remarks from RichGoldsbury, president of Bobcat andDoosan (parent company of Bobcat) of North America;Gwinner Mayor Dan McKeever; North Dakota Lt. Gov.Drew Wrigley; North Dakota Sen. John Hoeven and NorthDakota Congressman Kevin Cramer. Sylvan Melroe, one ofthe organization’s first marketing managers, talked about theperseverance of the Melroe family, who owned MelroeManufacturing, and built the first Bobcat loaders. He reflect-ed upon the early days of the loader — as it transitioned fromthe original three-wheeled version to the skid steer loader weknow today — and how Melroe Manufacturing improvedthe design that became increasingly tested by challengingjobs the more the machine grew in popularity.Cyril Keller, one of the brothers who invented the original
three-wheeled loader and soon after partnered with MelroeManufacturing, was on-hand as well.The ceremony culminated with a product line roll-off of a
special edition one-millionth bobcat loader, which Bobcat isselling in limited quantities through authorized dealers.
“This entire celebration is about much more than a singleloader, the actual millionth machine,” Goldsbury said. “Itrepresents everything Bobcat has accomplished as an organ-ization over six decades, and it signifies our vision for thefuture. We embrace and honor our history, so it was particu-larly special to have some of the company’s pioneers andearly leaders here. But we wanted to bring them togetherwith those who are moving us forward into the new era —those who will help us build the next million loaders.”
A Day Filled With EventsThe general public was invited to an assortment of
Bobcat-sponsored events, including a 5K run/walk in
The Loader ThatLaunched An
IndustryThe million-loader celebration honors
the revolutionary three-wheeled loaderengineered by brothers Cyril and LouisKeller of Rothsay, Minn., designed toclean turkey manure out of barns.Second-generation MelroeManufacturing Company leaders — sonsof founder Edward Gideon “E.G.”Melroe — Clifford, Lester, Roger andIrving Melroe; and their brother-in-lawEugene Dahl saw strong potential for themachine to meet the needs of any live-stock farmer.
In 1958, the Gwinner-based manufacturer boughtthe rights to this innovative three-wheeled loader,and Louis and Cyril Keller became employees of theMelroe Manufacturing Company, assigned to putthe loader into production.The Keller Loader, as the original machine was
called, was improved with a larger 9- hp engine,and a new product line for the Melroe Companywas born — the M-60, a three-wheeled Melroe self-propelled loader. It was the forerunner of whatbecame the Bobcat skid steer loader and ultimatelylaunched the compact equipment industry.Then, in 1960 the company built the first true skid
steer loader with four-wheel drive. In 1962, the load-ers were branded “Bobcat” after the “tough, quickand agile” prairie animal.Today, the Bobcat name still matches the perform-
ance qualities of the enduring international brand.Bobcat Company has become North Dakota’slargest manufacturer with more than 2,000 employ-ees in the state. Bobcat products have representationthrough more than 900 dealers in more than 100countries with production facilities in Gwinner,Bismarck and Wahpeton, N.D.; Litchfield, Minn.;France and the Czech Republic.
Bobcat Company and Doosan North America PresidentRich Goldsbury (L) and Cy Keller, one of the inventorsof the original loader.
Bobcat Company and Doosan North America PresidentRich Goldsbury addresses the crowd at the BobcatCompany Millionth Loader Celebration.
The millionth Bobcat skid steer loader rolls off the line and out of theGwinner factory.
Two loaders rolled off the line during the MillionthLoader ceremony: loader number one-million, a skidsteer loader; and loader number one-million-one, acompact track loader version.
see BOBCAT page 20
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 9
People. Passion. Performance.
TOUGH, RELIABLE
o.cp.cwww
m
ssa P.elopeP
.ecmanrofer P.nois
RENO, Nev. (AP) A 52-ton (47 t) concrete bridge sur-vived a series of 10 earthquakes in the first multiple-shake-table experiment at the University of Nevada’s newEarthquake Engineering Lab in Reno. The 70-ft. (21 m) bridge was shaken in a series of simu-
lated earthquakes, culminating in the large ground motionssimilar to those recorded in the deadly and damaging 1995magnitude 6.9 earthquake in Kobe, Japan. University of Washington researcher John Stanton said the
test was a complete success. He said the bridge withstood thedesign standard and actually exceeded it by 2.2 times. The rocking, pre-tensioned concrete bridge support sys-
tem is a new bridge engineering design the team has devel-oped with the aim of saving lives, reducing onsite construc-tion time and minimizing earthquake damage. It’s the newest addition to UNR’s world-renowned earth-
quake/seismic engineering facility. (This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Shaken But Sturdy…
Concrete BridgeDesign Survives Series of Tests
Page 10 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Riverside, CA(951) 276-9025
Coachella, CA(760) 578-1043
Visalia, CA(559) 651-0116
Stockton, CA(510) 516-5567
Sacramento, CA(916) 997-7492
San Diego, CA(619) 205-2026
Phoenix, AZ(602) 276-2040
Bullhead City, AZ(928) 715-0672
Las Vegas, NV(702) 877-4302
Salt Lake City, UT(801) 796-7368
Boise, ID(208) 459-3800
Edmonton, Alberta(780) 490-6965
Ft. McMurray, Alberta(780) 598-0132
Williston, ND(701) 572-8126
Since 1962
HEAVY EQUIPMENT RENTALSServing the Construction and Mining Industries
When a backhoe’s not big enough!
TIER 4/TIER 3
RENTAL UNITS
Santa Ana, CA – HQ(714) 554-4851
´
´
´
´
´
´´
´´´
´
´
´´
´
Fort McMurray
Edmonton
WillistonBoise
Salt Lake CitySacramentoStockton
Las VegasBullhead City
Phoenix
CoachellaSan Diego
Riverside
Santa AnaHEADQUARTERS
Visalia
15 LOCATIONSIN NORTH AMERICA
Midco Demolition Tool to Co-Sponsor ‘Old Stewball’Midco Demolition Tool Co.
announced that it will co-sponsor arace car at the famous BonnevilleSalt Flats in Wendover, Utah.Joining with Dallas, Texas-
based USO and dealer Six andMango of Grand Prairie, Texas,Midco Demolition Tool will helpbring a 1957 Chevy named “OldStewball” out of retirement for therace, which will be held from Aug.9 to 15.Midco manager (and one-time
dragster owner) David Spainhoursaid he and his company have par-ticipated in sponsoring all types ofracing cars for 30 years, but healways wanted to sponsor aBonneville racer. “We will be at the Bonneville
Salt Flats in Wendover to watch the’57 Chevy try to break the 250mile-per-hour record,” saidSpainhour. “When this happens,‘Old Stewball’ will be the fasteststock-bodied 1957 Chevy in exis-tence.” The vehicle and Six and
Mango’s Tom Hurley, the driver,will have to do qualifying runs to
build up to the 250 mph run on thefive-mile course, he added.“Tom [Hurley] is qualified and
licensed up to 175 [mph] on thetwo-mile course at this time andwill have to qualify for 200 mile-per-hour before he can attempt the250 mile-per-hour-run. ‘Old
Stewball’ will be powered by aSupercharged Big Block Chevyengine using powerful nitromethane fuel,” Spainhour said.“Old Stewball’s” driver, Tom
Hurley of Six and MangoEquipment is a construction safetyteam trainer with experience in
both civilian and military instruc-tion techniques. Hurley also is anEMT with vast experience insearch and rescue operations withSearch One Rescue Team. He iscertified in confined space, trench,high angle and swift water rescue.In addition to his role at Six and
Mango, Hurley currently is a mili-tary emergency management spe-cialist.Hurly has been racing since
1960. He has extensive experienceas a drag racer, top fuel, off-road,circle track and now gas class.Spainhour is not only looking
forward to the event but he alsowill share the excitement withMidco’s hydraulic hammer cus-tomers and race enthusiasts.“We determined that this would
be an exciting and fun event to helppromote our new line of Midcodesigned and produced hydraulichammers,” said Spainhour. “We areinviting all our customers to join usfor the event scheduled for August9, 2014 to August 15, 2014. Midcowill have all kinds of refreshmentsand the attendees will be able toexamine the ’57 Chevy up close.”For more information, call
214/688-0444.(This story also can be found
on Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG
Joining with Dallas, Texas-based USO and dealer Six and Mango of Grand Prairie, Texas, MidcoDemolition Tool will help bring a 1957 Chevy named “Old Stewball” out of retirement for the race,which will be held from Aug. 9 to 15.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 11
YOUR COMPLETE RENTAL RESOURCE
Texas’ COMPLETE Factory-Direct Rental Resource
Build-A-Box™
Steel Trench Shields
Slide Rail System
y-Direct
ACTOR FFACTORY-DIRECT Sales & Rental FactorTEexas’ COMPLET
Rental ResourceLargest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.
y-Direct
ACTORY-DIRECT Sales & Rental
Largest selection of USA-made trench shielding and shoring equipment.Custom shields built to your specs.
ACTORY-DIRECT Sales & Rental
Special Operations Shoring Division.raining.Safety Trench TOSHAA T
Special Operations Shoring Division.raining.
rench ShieldsT Steel
DALLAS/Ft. WORTH(817) 502-1444
ONHOUST(713) 671-2551
Build-A-Box™
Houston Formerly:CEESOURRCEAL RENTE R RENTOUR COMPLETYO
DALLAS/Ft. WORTH Slide Rail System
Since 1985!
CALL JENNIFER TODAY!(888) [email protected]
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage
• Arms & Booms
• Cylinders
• Valves
• Transmissions
• Pumps
• Engines
• and More!
For All YourEquipment Needs!
Authorized Dealer For
www.BCESPower.com
Finance & Lease RatesStarting as Low as .0 APR!
SALES • PARTS • SERVICE
Page 12 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale$85
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale..........$85
Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale ...... $85
Bobcat E35 Compact Excavator, 1:25 Scale ............................$50
Bobcat E55 Compact Excavator, 1:25 Scale ............................$60
Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ..................$25
Bobcat S510 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat S530 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat S550 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat S570 Skid Steer Loader, 1:25 Scale..............................$65
Bobcat T770 Compact Track Loader, 1:25 Scale ....................$45
Bobcat 225 Compact Excavator, 1:25 Scale ............................$50
Case CX250C Excavator, 1:50 Scale ........................................$195
Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ................$60
Case 580 ST Backhoe/Loader, 1:50 Scale ................................$95
Case 580K Backhoe/Loader, Conexpo 1987, 1:35 Scale ......$125
Case 1102 Vibromax Roller, 1:35 Scale....................................$100
Caterpillar CT660 Dump Truck, Yellow Cab, 1:50 Scale..........$80
Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,
1:50 Scale ......................................................................................$100
Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ............$65
Caterpillar D6K Track-Type Tractor, 1:50 Scale ........................$65
Caterpillar D7E Track-Type Tractor, 1:50 Scale ........................$90
Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale......$75
Caterpillar D8T Track-Type Tractor, 1:50 Scale ......................$110
Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ....$75
Caterpillar D10N Track-Type Tractor, 1:50 Scale ......................$50
Caterpillar D10T Track-Type Tractor, 1:50 Scale ....................$100
Caterpillar D11R Track-Type Tractor, 1:50 Scale ....................$100
Caterpillar 323D L Excavator, 1:50 Scale ..................................$90
Caterpillar 336D L Excavator, 1:50 Scale ..................................$95
Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..........$50
Caterpillar 365B L Series II Excavator, 1:50 Scale....................$75
Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale ......$70
Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale........$70
Caterpillar 631E Motor Scraper, 1:50 Scale ..............................$50
Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body,
1:50 Scale ........................................................................................$70
Caterpillar 775G Off-Highway Truck, 1:50 Scale ....................$110
Caterpillar 963D Track Loader, 1:50 Scale ................................$60
Caterpillar 966K Wheel Loader, 1:50 Scale................................$95
Caterpillar 977 Traxcavator, 1:50 Scale ......................................$60
Caterpillar 988K w/ Grapple, 1:50 Scale ..................................$160
Doosan Moxy MT31 Articulated Truck ....................................$100
Hamm 3307 Compact Roller, 1:34 Scale....................................$45
Hamm 3414 Pad Foot Compactor, 1:50 Scale ..........................$90
International 175 Crawler Loader, 4in1, 1:50 Scale..................$65
International 560 Pay Loader, 1:25 Scale ................................$145
International TD-15 Dozer w/Umbrella, 1:50 Scale ..................$60
International Red Forestry TD-15 w/Umbrella, 1:50 Scale......$60
International TD-20E Dozer, 1:64 Scale......................................$24
JCB 3CX Backhoe/Loader, 1:50 Scale........................................$75
John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ......$70
John Deere 200C LC Excavator, 1:50 Scale..............................$45
John Deere 315SJ Backhoe/Loader, 1:50 Scale ......................$45
John Deere 624J Military Wheel Loader, 1:50 Scale................$40
John Deere 772CH Motor Grader, 1:50 Scale ..........................$45
John Deere 850C Dozer, 1:50 Scale............................................$40
John Deere 850K Dozer, 1:50 Scale............................................$65
Komatsu CK25 Compact Track Loader, 1:50 Scale ................$45
Komatsu D51 PX Dozer, 1:50 Scale ............................................$85
Komatsu D51 EX Dozer, 1:50 Scale ............................................$85
Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ......................$80
Komatsu D65PX-17 Dozer, 1:50 Scale........................................$80
Komatsu D375 A Dozer, 1:50 Scale ..........................................$125
Komatsu GD655 Motor Grader, 1:50 Scale................................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ......................$80
Komatsu HM250 Articulated Dump Truck, 1:50 Scale ............$75
Komatsu HM400-3 Articulated Truck, 1:50 Scale ..................$100
Komatsu WA500 Wheel Loader, 1:50 Scale ..............................$80
Komatsu WB146 Backhoe/Loader, 1:50 Scale ........................$75
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ......$90
Kubota KX91-2 Compact Excavator, 1:25 Scale ......................$60
Leeboy 8816 Asphalt Paver, 1:50 Scale ....................................$90
Link Belt 210X3 Excavator, 1:50 Scale ......................................$45
Link Belt 800 X2 Excavator, 1:50 Scale....................................$200
Northwest 25D Shovel, 1:50 Scale ..............................................$75
Vogele MT3000 Powerfeeder, 1:50 Scale ................................$140
Vogele Super 700 Small Paver, 1:50 Scale ................................$80
Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ....................$115
Volvo EC220D Excavator, 1:50 Scale........................................$115
Volvo L220G Wheel Loader, 1:50 Scale ..................................$120
Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale........................$90
Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale......$145
Wirtgen W250i Cold Milling Machine, 1:50 Scale ..................$160
Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Vogele 1900-2 Tracked Paver, 1:50 Scale $140Komatsu PC360LC-10 Excavator, 1:50 Scale $90Caterpillar CT660 Day Cab Tractor w/ Trail KingLowboy Trailer, 1:50 Scale $100
Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 13
PAVE WITH PRIDEThe F1000 paver – low deck, full visibility and exceptional accuracy for a high-quality mat worth bragging about.
Please contact your local Atlas Copco distributor. www.atlascopco.us
Page 14 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Factory Trained Mechanics
JACKSONVILLE CRANE & MACHINERY, LTD.6740 Highway Avenue Jacksonville, FL. 32254
OFFICE: 904-786-3181E-MAIL: [email protected]: www.jaxcrane.com
All machines are owned by Jacksonville Crane & MachineryALL MACHINES ARE SUBJECT TO PRIOR SALE
AND PRIOR RENTAL COMMITMENT
2002 LIEBHERR LMT 1100-2 S/N 65192, 120 ton Allterrain hydraulic truck crane JCM-180, Main boom length171', jib 35'-62', 2 winches, boom dolly, Block & Ball, Tires;29.5x25, Cummins engine Condition: Excellent ....$550,000
1994 LINKBELT HSP-8060 S/N 53i4-1729, 60 ton roughterrain crane JCM-146, 110' Main boom, 33' jib, 2 winches,Cummins engine Condition: good............................$135,000
WAUKESHA-PEARCE INDUSTRIES, INC.
12320 S. MainHouston, TX 77035
713-723-1050Fax: 713-551-0798
Tomball, TX281-351-9016
Kilgore, TX903-984-2011
Port Arthur, TX409-721-5305
Corpus Christi, TX361-884-8275
Edinburg, TX956-386-0107
San Antonio, TX210-648-4444
Pflugerville, TX512-251-0013
Buffalo, TX903-322-7150www.wpi.com
KOMATSU EQUIPMENTCOMPANY
1486 South Distribution DriveSalt Lake City, UT 84104
801-972-3660
4460 Pioneer WayElko, NV 89801775-753-7557
3825 Losee RoadNorth Las Vegas, NV 89030
702-399-1004
900 Marietta WaySparks, NV 89431775-356-1334
6253 West Gilbert Industrial CourtHurricane, UT 84737
435-986-1000
10790 South Highway 59Gillette, WY 82718
307-682-1445
405 Jonah DriveRock Springs, WY 82901
307-686-1300
4 Rivers Equipment recently welcomed two new hires.Terri Thornton has been welcomed as the general parts
manager of the construction division. Thornton will be locat-ed in the adminstration office in Greeley, Colo. She is join-ing 4 Rivers Equipment from John Deere Construction andForestry and will be bringing 38 years of experience with her. Thornton is looking forward to being closer to the cus-
tomer and said, “I’m excited about the vision of success 4Rivers has defined and I look forward to helping achieve thatvision.” John Shearer, the general manager of construction
said, “We are excited towelcome Terri to the 4Rivers Equipment family.Her wealth of experienceand industry knowledgehas already made her akey addition to the teamand I know she will excelas our general parts man-ager of the constructiondivision.”
4 Rivers Equipmenthas announced that DannyBratton has now beenhired as the ColoradoSprings store manager.Bratton has been with 4Rivers Equipment sinceSeptember of 2005.Before being hired as thestore manager he workedas a salesman of the Colorado Springs store. Bratton is bringing 18 years of experience with him.
Bratton said he is looking forward to working with his teamat the Colorado Springs location. Shearer said he “is confi-dent that Danny is going to be a great store manager and weare looking forward to seeing him excel at his new role.”
(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Greeley, Colo. ...
4 Rivers WelcomesNew Hires Bratton, Thornton to Team
Terri Thornton
Danny Bratton
Visit CEG’s Web Site at
www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 15
DOZERSFrom Komatsu – The Dozer Experts
KIRBY-SMITH MACHINERY INC.
6715 W RenoOklahoma City, OK 73137
800-375-3339405-495-7820
Fax: 405-787-5973
12321 E. Pine StreetTulsa, OK 74116
800-375-3733918-438-1700
Fax: 918-437-7065
Abilene, TX877-577-5729325-692-6334
Amarillo, TX800-283-1247806-373-2826
Dallas, TX800-753-1247214-371-7777
Ft. Worth, TX877-851-9977817-378-0600
Lubbock, TX866-289-6087806-745-2112
Odessa, TX877-794-1800432-333-7000
www.kirby-smith.com
POWER MOTIVE CORPORATION
DENVER HEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216
888-271-3308
Colorado Springs, CO888-271-3308
Grand Junction, CO888-271-3308
Milliken, CO888-271-3308
Durango, CO888-271-3308
Cheyenne, WY888-271-3308
www.powermotivecorp.com
Page 16 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DENVER HEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216
888-271-3308
Colorado Springs888-271-3308
Grand Junction888-271-3308
Milliken888-271-3308
Durango888-271-3308
Cheyenne888-271-3308
POWER MOTIVE CORPORATIONwww.powermotivecorp.com
DITCH WITCH OF EAST TEXAS
www.witchequipment.net
7809 Hwy. 271Tyler, TX 75708903-592-6226
Fax: 903-535-9768
DITCH WITCH OF ARIZONAwww.ditchwitchaz.com
4028 S. 36th St.Phoenix, AZ 85040
602-437-0351
Tucson, AZ520-579-0261
TRI-WEST TRACTOR
www.tri-westtractor.com
6281 Southfront RoadLivermore, CA 94450
925-455-8200Fax: 925-455-8220
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 17
Page 18 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Texas Facility...
Mack Expands Customer Support NetworkMack Trucks recently announced
further investment and growth in itsextensive customer support networkwith a new dealership in Cotulla,Texas, scheduled to open late August. Valley Truck Centers’s new 40,000
sq. ft. facility also features the world’slargest Mack Trucks pylon, measuringin at 17 ft. 2 in. tall and 29 ft. 6 in. wide.The sign was recently installed in
preparation for the grand opening. Thenew Valley Truck Centers facility,located at 206 W FM 468, off Exit 67on Interstate-35, midway between SanAntonio and Laredo, features 22 serv-ice bays and offers both new and usedvehicles, parts delivery and road serv-ice.“Mack is committed to growing our
extensive dealer network, and theValley Truck Centers facility is amongthe biggest, boldest examples,” saidStephen Roy, president, Mack TrucksNorth American sales and marketing.“The new facility — boasting theworld’s largest Mack Trucks sign —will offer our customers even moresupport for their operations.”
Since 2010, Mack dealers haveinvested $380 million, resulting in a:• 35 percent increase in service bay
capacity• 162 percent increase in Mack
Master Technicians• 69 percent increase in spare parts
availability• 62 percent increase in hours avail-
able for service
• 82 percent increase in parts depart-ment employeesMack’s extensive service and sup-
port network of more than 460 Mackdealer locations and 15,000 additionalservice providers in North America isvital to the success of Mack’s aftermar-ket support, according to Roy.“Our continued growth is only pos-
sible through the cooperation of Mack,the loyalty of our customers and part-ners and the professional dedication ofour employees,” said Tammy Cuellar,president and CEO of Valley TruckCenters. The ongoing investments to expand
service and support capabilities furtherthe effectiveness of Mack’s GuardDogConnect telematics-based solution,which quickly diagnoses potentialissues, proactively schedules repairsand confirms that required parts are instock and ready to install, all while thetruck is still on the job.
(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
Valley Truck Centers’s new 40,000sq. ft. facility also features theworld’s largest Mack Trucks pylon,measuring in at 17 ft. 2 in. tall and29 ft. 6 in. wide.
Rugged Off-highwayCabin Temperature Control Systems
• Add-on & Replacement Climate Control Systems
• Custom Cooling/Heating Systems
• Self-contained & Split Systems• Cabin Top & Wall Mounted Systems
• Engine, AC Electric & Hydraulic Driven Compressors
• Cabin Filters & Pressurizers
Email: [email protected] Us For Assistance (972) 647-1056
www.visionaire-inc.com
Bacon-Universal Company, Inc.www.baconuniversal.comHIHilo808-935-8595 • 800-352-3508Honolulu808-839-7202 • 800-352-3508Kailua-Kona808-326-1212 • 800-352-3508Kauai (Lihue)808-245-8472 • 800-352-3508Wailuku Maui808-244-9158 • 800-352-3508
Clairemont Equipment Co.www.clairemontequipment.comCAEscondido760-739-9100Fontana909-429-9100Imperial760-355-7700Indio760-863-5558San Diego858-278-8351
Craig Taylor Equipment Companywww.craigtaylorequipment.comAKAnchorage907-276-5050 • 800-279-5051Fairbanks907-452-1192 • 800-452-1192Soldotna907-262-5977 • 800-254-5977Wasilla907-376-3838 • 800-973-2607
Kirby-Smith Machinery Inc.www.kirby-smith.comOKOklahoma City405-495-7820 • 800-375-3339Tulsa918-438-1700 • 800-375-3733TXAbilene325-692-6334 • 877-577-5729Amarillo806-373-2826 • 800-283-1247Dallas214-371-7777 • 800-753-1247Ft. Worth817-378-0600 • 877-851-9977Lubbock806-745-2112 • 866-289-6087Odessa432-333-7000 • 877-794-1800
Power Motive Corporationwww.powermotivecorp.comCOColorado Springs719-576-5541Denver303-355-5900Durango970-259-0455 • 970-259-0456Grand Junction970-241-1550Milliken970-587-1188
Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 INTERIM EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
WEST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 19
www.komatsuamerica.com
LOADERSFrom Komatsu - The Loader Experts
.
Komatsu Equipment Co.www.komatsueq.comNVElko775-753-7557North Las Vegas702-399-1004Sparks/Reno775-356-1334UTHurricane/St. George435-986-1000Pleasant Valley435-216-7777Salt Lake City801-972-3660 • 1-877-KomatsuSouth Jordan801-972-3660WYCasper307-682-1445Gillette307-682-1445Rock Springs307-686-1300
Modern Machinery, Inc.www.modernmachinery.comIDBoise208-336-8570 • 800-221-5211Pocatello208-233-5345 • 800-829-4450MTBillings406-252-2158 • 800-735-2589Kalispell406-755-5540 • 800-434-4190Missoula406-523-1100 • 800-332-1617OREugene541-688-7321 • 800-826-9811Portland971-222-1710 • 800-950-7779WAKent253-872-3500 • 800-669-2425Rochester360-273-4284 • 800-304-4421Spokane509-353-1654 • 800-541-0754
Road Machinery, LLCwww.roadmachinery.comAZGilbert480-545-2400Phoenix602-252-7121Prescott928-778.5621Tucson520-623-8681 • 800-989-8681CABakersfield661-695-4830Fremont510-659-1903Fresno916-350-0640Perris909-355-3600Redding530-229-3820Pico Rivera562-699-6767West Sacramento916-375-3540TXEl Paso915-872-1001NMAlbuquerque505-345-8383Farmington505-324-8601
Waukesha-PearceIndustries, Inc.www.wpi.comTXBeaumont409-721-5305Buffalo903-322-7150Corpus Christi361-884-8275Edinburg956-386-0107Houston713-723-1050Kilgore903-984-2011Pflugerville512-251-0013Port Arthur409-721-5305San Antonio210-648-4444Tomball281-351-9016
Page 20 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Bobcat Invites Public to Events Including Factory Tours
Gwinner, Bobcat factory tours, carnival-type festivities in theGwinner Park and a “Bobcat square dance” loader perform-ance by four brothers who have 130 years of combined serv-ice at Bobcat Company. The Association of EquipmentManufacturers (AEM) also made the Gwinner event a stopon its “I Make America” nationwide tour, which advocatesfor pro-manufacturing policies to create more jobs in theUnited States and keep the economy competitive with othercountries. Attendees over the age of 18 could enter to win a2014 Harley-Davidson Road King featuring a custom “IMake America” paint job.“It was particularly special to host the ‘I Make America’
tour,” Goldsbury said. “Bobcat is a great manufacturing suc-cess story for so many reasons, from the generations thathave been employed to the products they’ve produced.Thousands of Bobcat employees have given many globalcustomers the tools they use to make a living.”Bobcat Company also helped Gwinner city officials ded-
icate three welcome signs at different entrances to town sig-nifying “Home of one million Bobcat loaders.”The company celebrated the production of 500,000 load-
ers in 2001 and 750,000 units in conjunction with its 50thanniversary in 2008. The million loaders built by Bobcat rep-resent the largest production of this equipment by any man-ufacturer globally.
An “Unstoppable” Force To commemorate the year-long celebration, Bobcat
developed the “Unstoppable” campaign, which recognizesthe company’s rich history and heritage, yet illustrates itsplans to continue to set the pace in the compact equipmentmarkets it serves. The celebration started in January, as Bobcat Company
launched a contest that ran through June, asking participantsto answer the question, “How does Bobcat make you unstop-pable?” The grand prize winner, who will receive a specialedition one-millionth bobcat loader, will be named inSeptember. Bobcat unveiled its special edition one-millionth
bobcat loaders at the ConExpo-Con/AGG trade show in LasVegas in March. Bobcat Company social media channels — Facebook,
Twitter, LinkedIn, Google Plus, Flickr and YouTube — fea-ture various elements of the celebration and Unstoppablecontent and promotions. Fans and followers can participatein merchandise giveaways and trivia contests, show pride byselecting a “pride badge,” share stories and read about howothers are joining in the celebration. A special app enablescustomers to upload photos and apply a custom “one millionstrong” treatment. Several celebration-focused videos areavailable as well. “The ceremony in Gwinner is a great centerpiece to what
we are doing to celebrate all year,” Goldsbury said. “But itdoesn’t start or end with this. ‘Unstoppable’ is a theme thatstarted in January, and we still have a lot of celebration timeleft in 2014 and beyond.”For more information, visit Bobcat.com/Million. (This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Pictured are descendants of the Melroe and Dahl families. The Melroe and Dahl families helped the originalMelroe Manufacturing Company produce, market andbrand the original Bobcat loader.
A Bobcat Special Edition One-Millionth Loader sitsatop a pole at the entrance to Gwinner, N.D., home toBobcat Company’s primary production facility.
BOBCAT from page 8
North Dakota Lt. Gov. Drew Wrigley addresses thecrowd.
North Dakota U.S. Senator John Hoeven addresses thecrowd.
Bobcat Company and the city of Gwinner, N.D., dedi-cated three signs at entrances to town; they signify thatGwinner is home to “One million Bobcat loaders andcounting.”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 21
. (555) 555 - 5555pX on, THoust
ler 1earD
erR Sand ies erM Sthe
yodaTToda. erzbulldoa with
, DRESSTearser 70 yvor oF
changethings e morhe T
. (555) 555 - 5555pX ustin, TA
ealer 2D
. (555) 555 - 5555
ou looke yr. Aerszbulldoies
o be set ttinues onbar cthe , yy,
as possible t wede�ned whaA r SST TA r
the y stathey e morthe , change
. (555) 555 - 5555p, TDallas
ealer 3D
. (555) 555 - 5555X
or fo ing ou look
with o be set
as possible
. samethe
.tsuppor
. No dealer in youy
y todatdealer
the best bulldo
. (555) 555 - 5555pAan SD
. (555) 555 - 5555X , T
ealer 3
1 (844) DRESSTall ea? Cour ar. No dealer in y
bulldoA DRESSTTA t a whasee o y t
onket? Cer on the marzthe best bulldo
. (555) 555 - 5555X , ToniotnA
ealer 4D
or f o A 4) DRESST TA
or fo can do er zbulldo
our local t ytacon
om.ce.dealersitwwwp
TIVITPRODUCw
e.dealersitwwwp
om
ARLEGENDPERFORMANCEPOWERYTIVIT
ica.cthameresstanor.drwww
.dealersitwwwp
om.ce
YPERFORMANCE
omica.c
.dealersitwwwp
om.ce.dealersit
om.ce.dealersit
Anderson Machinery Co.6535 Leopard St.
Corpus Christi, TX 78409361-289-6043
www.andersonmachinerytexas.com
Mega Machinery Co.12215 Highway 67
Lakeside, CA 920401-855-872-3497619-561-7832
Fax: 619-561-9507www.megamachinery.com
Page 22 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Underpasses Greatly DecreaseNumber of Animal-Vehicle Collisions“Thanks to the construction of the
underpasses … the number of animal-vehicle collisions is way down,” saidMeg Kenagy, Oregon ConservationStrategy communications coordinator.“Deer, elk, bobcats, black bears, squir-rels and other species are using thestructures to avoid crossing the high-way, making it safer for people andwildlife.”The underpasses were built over a
two year period when the highway wasbeing expanded from two to four lanes.Because it takes animals several gener-ations to learn to use the safer route,fencing along a 4 mi. (6.4 km) stretchof the highway also was incorporatedinto the project to direct animals to usethe underpasses. “Since the structures were complet-
ed in 2012, an ongoing study hasshown a greater than 80 percent reduc-tion in deer mortality along that stretchof highway,” Kenagy said.The underpasses, which cost $2 mil-
lion, were built using standard bridgebuilding construction, said Davenport.“First, we did embankment con-
struction with bulldozers, excavatorsand rollers,” he said. “There are twobridge sets, for a total of four bridgesthat are twins of each other. It does takea lot of time, excavating, setting therebar, pouring the foun-dation, working up to thebridge deck. One is 60-feet wide and the other is100-feet wide. The proj-ect on Highway 97 wasthe first on the state high-way system.” Colorado and Utah
were the first states tobuild some type ofwildlife vehicle protec-tion system. They alsoare utilized in Alberta,Canada, near the Lake Louise areawhere there were significant problemswith animal-vehicles collisions,Davenport said.Now, Oregon is planning a third
migration route, this one to be an over-pass also on Highway 97 near Chemultin south central Oregon.“In this case, animals will be going
over the top of the highway,”Davenport said. “It will look like apedestrian bridge but a lot wider.”The project is still in the design
phase, but will likely be a precast con-
crete arch, said Zach Beget, bridgedesigner. “That means it’s built somewhere
else, and they bring it here and erector-set it in place,” Beget said. “This typeof construction is fairly quick. It staysout of the travel lane of Highway 97 soyou’re not really having to postponetraffic. The cranes will be on sight. Theconcrete arches travel on trucks and thecranes pick them up and set them inplace.”ODOT is looking to a similar over-
pass in Nevada as guide for the one
they hope to construct in Oregon. Butthe plans are still preliminary and couldchange, Beget said. Another option would be building an
arch bridge out of corrugated metal.“We have until November to make a
decision,” Beget said. “It’s going bearound $2 million just for this onestructure. It’s quite large. The highwayis currently two lanes but it will beexpanding to four and we want to be toaccommodate the additional lanes.Right now, we have enough fundingfor 30 percent of the design acceptancephase. We’re hoping once that is done,the funding to build it will follow.”
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) CEG
WILDLIFE from page 1
One of the underpasses is a wildlife only underpass; the other, designedfor wildlife, with an additional lane open seasonally to vehicles.
Oregon is now planning a third migration route,this one to be an overpass also on Highway 97near Chemult in south central Oregon.
One of the underpasses is a wildlifeonly underpass; the other, designedfor wildlife, with an additional laneopen seasonally to vehicles.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 23
Page 24 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Western Construction GroupPromotes Tripp to Manager
Western Construction Group haspromoted Mike Tripp of Blaine, Minn.,to branch manager of the WesternWaterproofing Co. branch inMinneapolis. Western WaterproofingCo. is a member company of WesternConstruction Group.
Mike Tripp, who has worked a totalof 35 years for Western Waterproofingas a bricklayer, foreman, superintendentand sales/project manager before beingpromoted recently to branch managerwill oversee the Minneapolis branch’sdaily operations in his new position.
Western Construction Group is head-quartered in St. Louis, Mo., with morethan 30 branch offices nationwide andemploys more than 1,200 salaried andhourly professionals who offer time-tested techniques and innovative tech-nology.
For more information, visitwww.westerngroup.com.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.) Mike Tripp
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
LiuGong North AmericaWelcomes Douglas Lake
LiuGong North America hasannounced Douglas LakeEquipment as a key member ofthe LiuGong North America deal-er network. Traditionally, up untilthis point, Douglas LakeEquipment has been a dealer for asingle line of products. LiuGong’sfull line product offering willallow Douglas Lake to have moreproducts available to supply abroader section of the market.
Douglas Lake Equipment(DLE), headquartered in Surrey,British Columbia, Canada, hasbeen in business for 15 years withmore than 105 employees. As asmall equipment dealer, DLE hasconcentrated its focus on theowner operators who enjoy a more personal-ized approach to business. DLE offers firstclass products with great value and service toits customers.
“We offer great products and we standbehind what we sell,” said Garry Frelick.Douglas Lake’s strength comes from its
diversity in serving both the agriculture andconstruction equipment industries. DouglasLake Equipment will carry LiuGong equip-ment at three branches, including Surrey,Quesnel and Kamloops.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Blair Gourlay (L) and Todd Sevrens at DLE SurreyBranch in British Columbia.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 25
hitachiconstruction.com
THAT’S ALL.
DOWNT IM E
CONF ID ENC E 4 RIVERS EQUIPMENTwww.4 riversequipment.com
Albuquerque, NM • (505) 884-2900
El Paso, TX • (915) 598-1133
Farmington, NM • (505) 326-1101
Hobbs, NM • (575) 392-6923
320-259-6222
OCT EQUIPMENTwww.octequipment.com
Clinton, OK • 580-323-3422
Oklahoma City, OK • 405-789-6812 • 800-375-2273
Tulsa, OK • 918-437-5085 • 800-375-1628
POWER EQUIPMENT COMPANYwww.power-equip.com
500 E. 62nd Ave. • Denver, CO 80216303-288-6801 • Fax: 303-288-6809
Grand Junction, CO • 970-243-0722
Colorado Springs, CO • 719-392-1155
Greeley, CO • 970-669-6209
ROMCO EQUIPMENT CO.www.romco.com
Austin, TX • (512) 388-2529 • (877) 851-1026
Buffalo, TX • (903) 322-5602
Carmine, TX • (979) 278-3570
Dallas, TX • (214) 819-4100 • (800) 227-6626
Ft. Worth, TX • (817) 626-2288 • (866) 966-4602
Houston, TX • (713) 937-3005 • (800) 865-6998
Longview, TX • (903) 758-5576
Rio Grande Valley, TX • (956) 565-0100
San Antonio, TX • (210) 648-4600 • (800) 966-4601
ROL Remote Oilfield LocationThree Rivers, TX • (361) 254-2317
Page 26 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
M. Leeder Construction wanted to be able to produce hotasphalt for pothole work during the winter. Cold patch,which had been used for repairing holes in the winter oncethe asphalt plants close is expensive, not particularly reliable,and has to be dug out and replaced with hot patch oncespring returns and the asphalt plants open. Leeder also need-ed a reliable source of asphalt in early spring when asphaltplants do not run every day depending on the temperature. ABagela BA 10000 asphalt recycler solved both issues.
“In the spring and at times in the fall our capability ofdoing work often relies on the weather and whether or notthe asphalt plants are open. With the help of the Bagela, thisyear we were able to produce 400 tons of hot asphalt duringperiods when the plants were closed. The Bagela produces avery acceptable 5/8 mix that we use for pothole repair and afinished course mix that we use on our paving projects,” saidMatt Leeder, president and founder of M. LeederConstruction.
Located in Durango, Colo., which is in the southwestcorner of Colorado not far from Albuquerque, N.M., M.
Leeder Construction’s primary focus is on asphalt pavingand asphalt maintenance. Over the last few years the com-pany has moved heavily in the direction of recycling asphaltand using the recycled product, thus dramatically decreasingtheir costs and producing savings for their customers.
“Last year we won the bid on a significant sized gas linereplacement project in the city of Durango. The asphaltplants closed early and we were able to produce 200 tons ofpatch material right through the heart of the winter to get theproject completed.
“As we have grown into the asphalt recycling business wedeveloped a permanent site that allows other contractors tobring the asphalt that they have torn up or milled at otherprojects and dump it at our yard. We have set up the Bagelaon an elevated pad, which allows it to dump the recycledproduct directly into asphalt trucks and trailers below. Wealso accept from area contractors waste concrete that weprocess into a ¾ inch aggregate, which we use as a base onnew driveway and parking lot projects. We also accept dirtfrom excavation projects that we process and mix with
manure and sell as a fertilized top soil.”A lot of the company’s work is utility work that would
typically involve digging up and replacing sewer, water andutility lines within a city or village. When these utilities rununderneath streets Leeder uses an “asphalt zipper” (a smallportable milling machine) to dig up the surface asphalt,which is collected and either stockpiled on site or taken backto its recycle yard. Because of the Bagela’s mobility the com-pany can bring the Bagela to the project and recycle themillings on site. This not only saves in the cost of asphaltmaterial, but it also eliminates a lot of material hauling,Leeder said.
The company was founded in 1985 as a smallowner/operator business doing asphalt maintenance primari-ly sealcoat work and some asphalt patching. Today, it hasgrown to 12 full-time employees and up to 17 employeesduring the peak season.
“This year, with the help of the Bagela, we were able to
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
SECT IONPavingPages 27-35
Colorado Company Finds Solutions With Bagela Recycler
Setting the Bagela on an elevated pad allows it to dumpthe recycled product directly into asphalt trucks andtrailers below.
see BAGELA page 30
M. Leeder Construction’s recycle yard.
Page 28 • August 9, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
BEE EQUIPMENT SALES, LTDwww.beeequipmentsales.comLubbock TX • 806/745-1511
ROMCO EQUIPMENT CO.www.romco.com
Austin512/388-2529877/851-1026
Buffalo903/322-5602
Dallas, TX214/819-4100800/227-6626
Ft. Worth817/626-2288866/966-4602
Longview903/758-5576
San Antonio210/648-4600800/966-4601
KIRBY-SMITH MACHINERY, INC.www.kirby-smith.com
Oklahoma City, OK • 800/375-3339
Tulsa, OK • 800/375-3733
Kansas City, KS • 877/851-5729
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 9, 2014 • Page 29
RIDEABILITY WITH VERSATILITY
Together the Vögele Vision 5200-2i paired with a Vögele screed deliver precise results in all applications.
Rideability: effi cient material handling and superior controllability with precise straight-line tracking and smooth, accurate turns.
Versatility: pick the screed to match the applicaiton – all mounted on one tractor! • Front mounted extension screed: multi-variable width paving and mainline paving applications • Rear mounted extension screed: mainline rideability and mainline density • Compaction screed: maximize in-place density, asphalt and roller compacted concrete applications
When quality of pavement matters, rely on Vögele pavers and screeds to get the job done.
www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES
12:55 PM
6715 W. RenoOklahoma City, OK
800-375-3339Tulsa, OK
918-438-1700Dallas, TX
214-371-7777Fort Worth, TX817-378-0600
Abilene, TX325-692-6334Amarillo, TX
806-373-2826Lubbock, TX
806-745-2112Odessa, TX
432-333-7000
COOPER EQUIPMENT CO.17474 Judson Rd.San Antonio, TX210-657-5151
NUECES POWER EQUIPMENT
www.nuecespower.comCorpus Christi, TX
361-289-0066Edinburg, TX
956-702-0066Laredo, TX
956-725-0066San Benito, TX956-361-0066Victoria, TX
361-576-0066Vinton, TX
915-541-0066
Spokane, WA800-541-0754
Kent, WA800-669-2425Rochester, WA800-304-4421Portland, OR
800-950-7779Eugene, OR
800-826-9811
Boise, ID800-221-5211Pocatello, ID
800-829-4450Missoula, MT800-332-1617Kalispell, MT
800-434-4190Billings, MT
800-735-2589
5055 E. 72nd Ave.Commerce City, CO
303-287-7506800-646-6636Durango, CO
970-247-4460Grand Junction, CO
970-243-7090Idaho Falls, ID208-523-9915
Salt Lake City, UT801-262-7441
Ogden, UT801-627-0049St. George, UT435-652-8003Casper, WY
307-266-4474Gillette, WY
307-685-4288Rock Springs, WY
307-382-5284
KIRBY-SMITH MACHINERY INC.www.kirby-smith.com
MODERN MACHINERYwww.modernmachinery.com
HONNEN EQUIPMENT CO.www.honnen.com
Page 30 • August 9, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
operate year around and had our material costs drop by25 percent. Forty percent of the product that we laid in2013 was recycled asphalt versus virgin asphalt. Thegrowth has been good and we are currently looking intoexpanding our operation.
“When we first purchased the Bagela we experiencedabout a three month learning curve. We had to test com-paction rates and learn what temperatures the Bagela hadto operate with specific materials for maximum efficien-cy. Today we are making a very high quality productfrom a machine that only requires a single operator.
“We are very happy with the Bagela’s productionrates. We can currently generate up to 10 tons of materi-al per hour. We are enjoying the flexibility of being ableto reduce and have a ready supply of product when weneed it and not being at the mercy of the asphalt plants.There is nothing that prevents us from paving into thenight when need be. The economic impact on our com-pany was immediate. Our overall profitability increasedby 12 percent. The Bagela was critical to us being able tomaintain profitability during the economic downturn.”
For more information on Bagela, visit www.bage-lausa.com.
For more information on M. Leeder Construction,visit www.mleederconstruction.com.
(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)CEG
BAGELA from page 27
M. Leeder Works in Cold Weather Months With Bagela BA 10000Stockpiled used asphalt is fed to the Bagela recycler.
Wacker Neuson has expanded itsvibratory rammer line to include twomodels powered by a 4-cycle Hondaengine. The BS 50-4As and BS 60-4Asare equipped with a 3.2-hp GX 100Honda engine.
The new BS 50-4As and BS 60-4Asoffer low oil shutoff technology thatprotects the engine. When starting theunit, a sensor will detect if machine hasno oil or low oil and does not allow theengine to start. Additionally, startingthe engine is easy due to a purge bulbthat evacuates air from the fuel line. Acompensated carburetor maintainsoptimum air-fuel ratio for up to threetimes longer air filter change intervals.
Wacker Neuson offers the mostcomplete line of vibratory rammers inthe industry. Dealers and contractorscan choose the engine type to best fittheir business preference. The newHonda powered models join theWacker Neuson powered 4-cycle ram-mers as well as the 2-cycle, oil injec-tion models. Also available are the pre-
mix 2-cycle and diesel model. All Wacker Neuson rammers offer
long shoe stroke and more blows perminute as well as exceeding all envi-ronmental emissions regulations,according to the manufacturer.
Wacker Neuson’s newest technolog-ical enhancement to all its rammersincludes a four-stage air filtration sys-tem. This system includes a main ele-ment with 20 percent more capacitythan the previous design and still usesthe rammer’s motion to self-clean, animproved cyclonic pre-filter designedfor more efficient dirt removal and afourth stage “last chance” filter thatprevents dust ingestion during filterchanges. Dust is an inherent enemy ofengines, so this new filtration systemwill provide for a virtually dust freeengine for longer life and improveddurability.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The BS 50-4As and BS60-4As are equippedwith a 3.2-hp GX100 Honda engine.
Wacker Neuson ExpandsVibratory Rammer Line
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 9, 2014 • Page 31
RDO EQUIPMENT CO.www.rdoequipment.com
Riverside, CA800/494-4863
Indio, CA760/342-8900
Imperial, CA800/464-4331
Lakeside, CA619/270-4300
Fort Worth, TX800/551-4905
Hewitt, TX800/551-8258
Irving, TX800/437-6342
Laredo, TX956/718-1909
Pflugerville, TX512/272-4141
New Braunfels, TX800/880-0880
Ehrenberg, AZ928/923-9611
Flagstaff, AZ928/526-0639
Phoenix, AZ602/415-4700
Prescott, AZ928/776-8300
Tucson, AZ520/294-5262
Wellton, AZ928/785-4276
Yuma, AZ928/341-7100
FOUR SEASONS EQUIPMENT8111 Mills Road, Houston, TX 77064
281/807-9777 • Fax: 281/807-1233
1425 Swisco Road,
Lake Charles, LA 70665
337/626-6000 • Fax: 337/626-7600
www.powermotivecorp.com
5000 Vasquez Blvd.
Denver, CO 80216
888/271-3308
Grand Junction, CO
888/271-3308
Colorado Springs, CO
888/271-3308
Milliken, CO
888/271-3308
Durango, CO
888/271-3308
Cheyenne, WY
888/271-3308
4 RIVERS EQUIPMENT2301 Candelaria Rd. NE
Albuquerque, NM
505/884-2900
11323 Rojas Drive
El Paso, TX
915/598-1133
1100 Troy King Rd.
Farmington, NM
505/326-1101
2400 W. Bender Blvd.
Hobbs, NM
575/392-6923
POWER MOTIVE CORP.
KOMATSU EQUIPMENT CO.1486 S. Distribution Drive
Salt Lake City, UT 84104
801/972-3660
Fax: 801/954-0936
4660 Pioneer Way
Elko, NV 89801
775/753-7557
3825 Losee Road
North Las Vegas, NV 89030
702/399-1004
900 Marietta Way
Sparks, NV 89431
775/356-1334
6253 West Gilbert Industrial Court
Hurricane, UT 84737
435/986-1000
405 Jonah Drive
Rock Springs, WY 82901
307/686-1300
Page 32 • August 9, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
W730A’s Hopper CapacityKeeps Material Flowing Weiler’s W730A road widener has a large
hopper capacity and high-production con-veyor to keep material flowing.“This machine sets the bar for production
in a high-volume application,” said BenSherod, Weiler territory manager.The W730A features a hopper capacity of
3.5 cu. yds. (2.7 cu m). It covers groundquickly and is capable of working at speedsof 350 ft. per minute (106 m per minute) andwidths of 14 ft. (4.3 m). The W730A canwork 12 in. (30.5 cm) above or below grade.The Cat C6.6 engine, with 174 hp (130
kW), provides plenty of power to keep theroad widener moving smoothly and steadily.A high-speed friction drive conveyor and its30 in. (76 cm) width also are essential to thehigh volume of material placed by theW730A.Applications include placement
of base materials, lane additions,shoulder paving/maintenance,trench filling, service roads and bikepaths/lanes.The W730A provides high production
while retaining the proven performance ofsmaller Weiler road widener models.• The ability to place, in a single pass,
material that previously took two or threepasses.• Handling is accomplished in “one
touch.” A haul truck deposits material in thehopper, and the conveyor discharges itthrough a side chute.• A strike-off tool levels the material and
grading is completed as the widener makesits pass. • The ability to work above or below
grade, and to hold exact grade/slope specifi-cations.“Our series of road wideners has been
popular in the industry,” Sherod said. “Theyreduce waste, enable contractors to placemore material in less time, and help crews toprecisely place a wide variety of aggregateand asphalt materials. The strike-off tool lev-els the material — eliminating the need forgrading.”“The W730 provides those same benefits,
but with an ability to place a higher volumeof material more quickly.”
The Latest ImprovementsAs the most recent addition to the Weiler
road widener lineup, the W730A includesseveral enhancements from the previousW730:• A hydraulic front dump hopper that
enables simplified loading and unloadingfrom increased clearance, and an ability tomatch trucks.• Updated control configuration for better
visibility and simplified operation• Electronic controller for diagnostics and
calibrations• Rotary potentiometer for more belt
speed precision• Bi-directional ground-drive joystick• A pause feature that enables stopping
and restarting without having to reset work-ing speeds• Repositioning of the operator station for
increased visibility of the hopper and tooling• Lowering of the engine to improve rear
visibility• Enabling the control panel to slide an
additional 8 in. (20.3 cm) on each side.
Easy to UseAll Weiler road wideners are engineered
for convenience of operators, cleanup crewsand service personnel. The self-cleaninghead, tail and return pulleys minimize mate-rial buildup. Service and maintenance checkpoints easily accessed, and multiple doorshelp technicians quickly reach components.Operators find the machines easy to con-
trol. Discharge direction can be adjustedwith the flip of a switch, while conveyorspeed is controlled from the operator’s sta-tion with a rotary potentiometer. Standardrear steer gives the W730A a tight insideturning radius of 14 ft. (4 m).Even trucking can be simplified with
hydraulically extendable, oscillating frontpush rollers. The rollers match varying truckconfigurations, facilitating smooth trucktransitions. The hydraulic front dump hopperadjusts to varying truck heights.“We wanted to make a machine that had
maximum productivity, but was still easy tooperate,” Sherod said. “Owners will quicklysee that we’ve accomplished that with theW730A.”For more information, visit weilerprod-
ucts.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The W730A features a hopper capacity of3.5 cu. yds. (2.7 cu m). It covers groundquickly and is capable of working atspeeds of 350 ft. per minute (106 m perminute) and widths of 14 ft. (4.3 m).
Serving the Asphalt Industry for 25 Years
2003 Etnyre ShooterDistributor, 1750 gallons, computerizedw/1 ft cut-offs, dieselheat, 12 ft spray bar,spray wand w/electricretractable hose reel,2003 IH 4300 w/DT466diesel engine, 5 spdauto trans, air brakes,a/c, 31,000 GVW
2004 Caterpillar CB534DXW Roller, double drum 79”roller, Cat 3054C diesel engine 130 hp, water system,scrapers, double drum drive, canopy w/rollover protection
866-430-7539
3517 Wayne White Rd., Climax, NC 27233
1998 Blaw Knox PF 3200 Paver, Omni 3E screed 10-18 1/2 electric heat (2006 year), Cummins dieselengine, power crown, slope & height, plumbed forgrade & slope, washdown hose & reel
2004 Etnyre Centennial II Distributor, 2000 gallons,computerized w/1 ft cut-offs, 12 ft spray bar, dieselheat, 2004 Sterling L7500 w/Cat 3126 diesel engine,10 spd trans, air brakes, a/c, 33,000 GVW
1999 Blaw Knox PF 5510 Paver, Ultimat 10-20 elec-tric screed, power crown & slope, tracks about 50%+
2006 Laymor 8HC Broom, 8 ft broom, Kubota dieselengine, 3 wheels, tow hitch, water system, good tires
1979 Blaw Knox RW 195 Road Widener, 4 wheel drive,14ft widening, 2-3ft hyd. Ext.
2008 Volvo DD138HFA Roller, 84" double drum highfrequency vibratory roller, Cummins 6.7L 173 hp dieselengine, double drum drive, scrapers, water system,canopy
2010 Volvo DD24 Roller, 47" double drum vibratory,hydrostatic drive, double drum drive, water system,scrapers, Cummins 32 hp water cooled diesel engine,ROPS
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 9, 2014 • Page 33
Page 34 • August 9, 2014 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Hamm GRW 280i Series Offers Tier IV-Interim TechnologyThe GRW 280i series of pneu-
matic compactors from Hammincorporates Tier IV-interim emis-sions technology in a variety ofweights for every application.The new GRW 280i pneumatic
or rubber-tired roller was introducedat Bauma 2013. The GRW 280iupdates the popular predecessorwith subtle design changes and newengines complying with EPA TierIVi.emissions controls.While each model can be
acquired in its own weight, therevised ballast compartment allowsusers to vary the operating weighteven more easily and flexibly thanbefore, according to the manufac-turer. New technical details include
prefitting for its high-speed tireinflation systemA standard oil service valve for
lossless oil change ensuresimproved environmental protection.Hamm’s GRW 280i rubber-tired
roller platform offers enhancedcompacting quality, plenty of driv-ing comfort, good visibility condi-tions, and the highest of safety stan-dards, according to the manufactur-er.Viewing channels in the frame
structure offer a view of the edgesand the tires of the outer wheels anda novel suspension of the frontwheels allows for an uninterrupted viewtowards the front.The new GRW 280i’s operator’s platform
rests in a versatile position, on a newlydesigned, asymmetrical frame. Innovationswith respect to ballasting, drive concept andoperating philosophy are not visible from theexterior, but their effects are evident as theymake compacting better and more conven-ient.A single driver’s seat — which optionally
can be moved and pivoted at the sidetowards the machine’s outer edges and alongwith the console — has replaced two seats,two steering wheels and two control con-soles in older models, which could restrictfreedom of movement.Operation and display elements are posi-
tioned on the console, and thus always are inthe driver’s field of vision. Also, the speed isno longer controlled by an accelerator pedalin the foot space; in the GRW series it’s con-trolled by joysticks, which signifies a con-siderable boost in convenience for the driver.In total, this operating concept correspondsto that of a tandem roller. Thus, cost-effec-tiveness is increased because in the future,operators can switch flexibly between rollertypes without any adaptation time.
Higher Speeds for Transport,Compaction
A hydrostatic rear-axle drive for the GRW280i allows for higher speeds during trans-port and compaction. To match it, the newlyconceived steered axle at the front with diskbrakes — which is standard on all models20-ton (18 t) and over — ensures the neces-sary braking force and thus considerablesafety when braking suddenly, even withmaximum load. In total, sensitive control ofthe rear axle and an extraordinarily goodview of the site and the wheels’ edges enablehigh compaction quality.The operator’s platform — with envelop-
ing ROPS — is located in front of the centerof the machine, while the Deutz 114-hp, TierIVi-compliant engine is situated in the rearof the machine. This ensures a view of allrelevant points. The view of the area direct-ly in front of the front axle also is unob-structed. There, hydraulic cylinders for levelcompensation of the front suspension usedto protrude out of the frame into the driver’sfield of vision. They have been replaced withtwo swing arms between the front pairs ofwheels, which require very little space andare not visible to the driver.The track offset between the front and rear
wheelsets is one of the basic features ofpneumatic rollers. Hamm utilized this fact inthe design of the new GRW and designed themachine frame in symmetry with thewheelsets. This intelligent design offers onecrucial advantage because, for the first timeever, the driver can see the wheels on allouter sides. Moreover, viewing channels inthe frame structure offer a view of the tires ofthe outer wheels.
Flexible Weight LoadingThe new GRW 280i rubber-tired roller is
being launched in the market with variousbasic weight ratings. The machines canaccommodate different amounts of ballastdepending on the basic weight. The outerdimensions are identical for all variants.Rubber-tired rollers need to be able to
have their weight modified swiftly and easi-ly. To this end the GRW 280i offers largeballast spaces between the wheelsets, and aserrated frame that is open in the downwarddirection. It can be filled with steel or con-crete using a forklift truck. And regardless ofhow much ballast a GRW 280i carries, dueto the intelligent ballasting system, the distri-bution of weight to the front and rear axlesalways remains constant.The generously dimensioned brake sys-
tem ensures the higher-than-average safetystandard during driving. When the machineis idle, the access steps to the cab afford addi-tional safety. They are integrated in the outercontour and can be folded out. Thus, theyoffer convenient and safe access to the main-tenance platform next to the engine. In thisposition, they lie on the outer contour, butconstitute a visual interference contour.As a result, after completing maintenance
work, the operator is reminded to swivel theaccess steps back into position. At the sametime, the maintenance accesses, whichwould otherwise have to be carried alongseparately, are eliminated. Hamm also hasmade provisions for efficient maintenance,as all maintenance points are on the engine’sright-hand side.No matter how much the version of the
GRW 280i weighs, its machine height isalways under 10 ft. (3 m). This not only sim-plifies transport on a low-bed trailer, but alsoworking under bridges, protrusions or otheroverhangs.For more information, visit www.wirtge-
namerica.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The GRW 280i updates the popular pre-deccessor with subtle design changesand new engines complying with EPA
Tier IVi.emissions controls.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • August 9, 2014 • Page 35
Introducing 12 tonsof stress relief
THE COMPACTION EXPERTS
BOMAG introduces the new standardfor affordable, user-friendly12-tonsoil compactors. The new BW211-40series is loaded with ergonomic featuresto reduce operator fatigue. Plus itdelivers over 53,000 lbs. of centrifugalforce (nearly 62,000 lbs. for pad footroller) over its massive 84-in workingwidth. Other benefits include:
•Redesigned, vibration-isolatedoperator’s platform with easy to usecontrols and improved sight lines
•Shorter stop to stop steering input forless fatigue, 12-degree oscillation and35-degree steering angle for optimummaneuverability
•Easy open, no tool hood for betterengine access
•EPA-compliant Tier 3 diesel engines
For detailed specs and full listof features and benefits on
BOMAG 40-series rollers, visitwww.bomag-americas.com
9
P.O. Box 31388Amarillo, TX 79120806-335-1681
Fax: 806-335-3932
Lubbock, TX806-763-0473
Odessa, TX432-580-3337
Abilene, TX325-677-2291
San Angelo, TX325-651-3337
Wichita Falls, TX940-322-3337
Enid, OK580-233-5000
Tulsa, OK918-245-5926
McAlester, OK918-423-2555
500 E. 62nd Ave.Denver, CO 80216303-288-6801
Fax: 303-288-6809
2329 River RoadGrand Junction, CO
81505970-243-0722
Fax: 970-243-0726
2940 E. Las Vegas St.Colorado Springs, CO
80906719-392-1155
Fax: 719-390-9604
8806 E. US Hwy. 34Johnstown, CO 80534
970-669-6209Fax: 970-669-6280
100 Barr Ave. SEAlbuquerque, NM
87105505-344-9466
Fax: 505-345-4715
3251 MJB RoadCasper, WY 82601307-577-9700
Fax: 307-577-9703
www.rgwequipment.com
550 Greenville RoadLivermore, CA 94550
925-606-2403925-606-2493
www.yellowhouse.us
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 37Page 36 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GRE AT MACHINE
WE’RE IN THIS TOGETHER.
©2013 The Charles Machine Works, Inc.
Witch Equipment Co., Inc.Fort Worth, TX | 817-429-4824
Witch Equipment Co., Inc.Hewitt, TX | 254-666-3344
Ditch Witch of OklahomaEdmond, OK | 405-348-4633
Ditch Witch of New Mexico, Inc.Albuquerque, NM | 505-345-1888
Ditch Witch of East TexasTyler, TX | 903-592-6226
Ditch Witch SouthwestLubbock, TX | 806-745-6866
Odessa, TX | 432-617-8351
Ditch Witch of TulsaTulsa, OK | 918-438-1560
Ditch Witch of ArkansasSpringdale, AR | 479-419-9771
Ditch Witch of ArkansasBenton, AR | 501-316-3200
Ditch Witch of ArizonaPhoenix, AZ | 602-437-0351
Ditch Witch of Southern ArizonaTucson, AZ | 520-579-0261
Ditch Witch of HoustonHouston, TX | 713-462-8866
Ditch Witch NorthwestPortland, OR | 503-286-6400Tukwila, WA | 206-995-8420Billings, MT | 406-252-7667
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 37Page 36 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GRE AT MACHINE
WE’RE IN THIS TOGETHER.
©2013 The Charles Machine Works, Inc.
Witch Equipment Co., Inc.Fort Worth, TX | 817-429-4824
Witch Equipment Co., Inc.Hewitt, TX | 254-666-3344
Ditch Witch of OklahomaEdmond, OK | 405-348-4633
Ditch Witch of New Mexico, Inc.Albuquerque, NM | 505-345-1888
Ditch Witch of East TexasTyler, TX | 903-592-6226
Ditch Witch SouthwestLubbock, TX | 806-745-6866
Odessa, TX | 432-617-8351
Ditch Witch of TulsaTulsa, OK | 918-438-1560
Ditch Witch of ArkansasSpringdale, AR | 479-419-9771
Ditch Witch of ArkansasBenton, AR | 501-316-3200
Ditch Witch of ArizonaPhoenix, AZ | 602-437-0351
Ditch Witch of Southern ArizonaTucson, AZ | 520-579-0261
Ditch Witch of HoustonHouston, TX | 713-462-8866
Ditch Witch NorthwestPortland, OR | 503-286-6400Tukwila, WA | 206-995-8420Billings, MT | 406-252-7667
Page 38 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Page 40 • August 9, 2014 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 9, 2014 • Page 41
COMING SOON!
Versatility You Can Depend OnSince inventing the backhoe in 1953 JCB has continued to set the standard for backhoe innovation. And with 28 families of attachments at your fingertips, that’s versatility unmatched in the industry. Whether your work day calls for a hammer, a compactor or a 6-in-1 bucket, you can count on the versatility the JCB provides. It’s just another reason why nearly 1 out of every 2 backhoes sold in the world is a JCB. And further proof that when it comes to backhoes, JCB sets the standard.
Enjoy fuel efficiency 21% better than the competition with JCB’s EcoMax engine.
CONTACT YOUR JCB DEALER FOR MORE INFORMATION.
THE JCB BACKHOE LOADER
3397
Dallas, TX214-819-3991Longview, TX800-245-7702Waco, TX800-245-7706Texarkana, TX888-327-7370
Tulsa, OK866-402-4248Oklahoma City, OK409-898-8700
www.darrjcb.com
Lubbock, TX806-745-2000Wichita Falls, TX940-687-2726Odessa, TX432-337-2823Amarillo, TX806-372-8386
Midland, TX432-685-9999Clovis, NM575-742-2726
www.ascoeq.com
San Antonio, TX210-662-9701
www.jcbofsouthtexas.com
Houston, TX713-692-4471Beaumont, TX409-898-8700
www.adobejcb.com
DARR ADOBE
Page 42 • August 9, 2014 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
Despite efforts by Construction Equipment Guide to contact all the
manufacturers of backhoes, not all of them appear in this chart.
VISIT WWW.CONSTRUCTIONEQUIPMENTGUIDE.COM
FOR COMPLETE BACKHOE LISTINGS.
Model Loader Loader Loader Backhoe Max Travel Speed Operating
SAE Lift Capacity Breakout Force Loading Height Digging Depth 4th Gear Fwd Weight
HP (kw) lbs. (kg) lbs. (kg) ft. (m) ft. (m) MPH (kmh) lbs. (kg)
580N 78 (58) 6,803 (3,086) 10,622 (4,818) 11.8 (3.6) 14.8 (4.5) 24.3 (39.1) 14,564 (6,606)
580 Super N 95 (71) 7,044 (3,195) 10,947 (4,965) 12 (3.7) 14.5 (4.4) 23.6 (37.9) 17,226 (7,814)
580 Super N WT 95 (71) 8,425 (3,821) 10,873 (4,932) 12 (3.7) 14.5 (4.4) 23 (37) 19,985 (9,065)
590 Super N 108 (81) 8,425 (3,821) 12,776 (5,795) 13 (4) 15.5 (4.7) 23 (37) 20,458 (9,280)
CASE
416F 87 (64.9) 6,751 (3,062) 12,281 (5,571) 11.9 (3.6) 14.3 (4.4) 25 (40) 14,953 (6,783)
420F 93 (69.3) 7,237 (3,237) 11,283 (5,118) 11.9 (3.6) 14.3 (4.4) 25 (40) 15,395 (6,938)
420F IT 93 (69.3) 8,137 (3,691) 11,575 (5,250) 11.9 (3.6) 14.3 (4.4) 25 (40) 15,829 (7,180)
430F 107 (78.7) 7,237 (3,283) 11,283 (5,118) 13 (4.0) 15.4 (4.7) 25 (40) 15,708 (7,125)
430F IT 107 (78.7) 8,173 (3,691) 11,575 (5,250) 13 (4.0) 15.4 (4.7) 26 (42) 16,142 (7,322)
450F 127 (94.7) 7,871 (3,570) 11,375 (5,160) 14.6 (4.4) 17.3 (5.3) 26 (42) 24,141 (10,950)
CATERPILLAR
�310K EP 70 (52) 6,600 (2,994) 9,350 (4,241) 10.9. (3.33) 14.3 (4.34) 18.6 (29.9) 13,913 (6,311)
310K 88 (66) 6,600 (2,996) 9,350 (4,241) 10.9. (3.33) 14.3 (4.34) 20.6 (33.1) 14,030 (6,364)
310SK 96 (72) 7,353 (3,335) 11,051 (5,013) 11.3 (3.43) 14.5 (4.42) 25.0 (40.0) 14,708 (6,671)
310SK TC 102 (76) 7,215 (3,276) 11,450 (5,194) 11.3 (3.43) 14.9. - 18.4 (4.55 - 5.61) 25.0 (40.0) 19,855 (9,006)
410K 107 (80) 7,200 (3,269) 10,300 (4,672) 12.5 (3.81) 15.8 (4.83) 20.4 (32.8) 16,391 (7,435)
410K TC 106 (79) 6,815 (3,091) 10,640 (4,826) 12.7 (3.86) 16 - 20 (4.90 - 6.10) 20.4 (32.8) 20,494 (9,296)
710K 130 (97) 9,277 (4,208) 15,540 (7,048) 14.3 (4.34) 17.8 (5.44) 21.8 (35.2) 23,802 (10,796)
JOHN DEERE
B26 23.3 (17.4) 1,300 (590) 2,344 (1,063) 6.4 (1.9) 8.3 (2.5) 11.1 (17.8) 4,001 (1,815)
L39 37.4 (27.9) 2,767 (1,255) 3,560 (1,615) 7.6 (2.3) 10 (3) 14.3 (23.0) 6,987 (3,170)
L45 42.5 (31.7) 2,848 (1,292) 4,530 (2,055) 7.6 (2.3) 10 (3) 14.0 (22.5) 7,173 (3,254)
M59 57 (42.5) 3,968 (1,800) 5,961 (2,704) 8.8 (2.9) 12 (3.6) 15.5 (24.9) 8,345 (3,785)
KUBOTA
see CHART page 46
766III Standard Stick 100 (74.5) 9,577 (4,344) 12,095 (5,486) 11.5 (3.5) 14.4 (4.3) 22.4 (36.0) 17,367 (8,000)
LIUGONG
B95C 97 (72) 7,996 (3627) 10,294 (4,669) 12.5 (3.67) 14.5 (4.42) 22 (35.4) 16,008 (7,261)
B95C TC 97 (72) 6,200 (2812) 8,182 (3,711) 12.5 (3.67) 14.5 (4.42) 22 (35.4) 18,135 (8,226)
B95C LR 97 (72) 7,996 (3627) 10,294 (4,669) 12.6 (3.85) 15.5 (4.72) 22 (35.4) 16,316 (7,400)
B110C 110 (82) 7,996 (3627) 10,294 (4,669) 13 (3.96) 15.5 (4.72) 23 (37) 16,316 (7,400)
NEW HOLLAND
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 9, 2014 • Page 43
In all areas of construction, ourproducts offer the flexibility andperformance you need to takeyour business to the next level.
Easily handle any type of job withKirby-Smith Machinery.
PAVING • COMPACTION • AIR COMPRESSORS • PUMPSSOIL STABILIZERS • CRUSHING • COMPACT MILLING MACHINES
EXCAVATORS • DOZERS • CRANES • BOOM TRUCKS
Abilene Amarillo Dallas Ft. Worth Kansas City877.577.5729 800.283.1247 800.753.1247 877.851.9977 877.851.5729Lubbock Odessa Oklahoma City St. Louis Tulsa
866.289.6087 877.794.1800 800.375.3339 866.279.1392 800.375.3733
www.kirby-smith.com 888.861.0219 Follow us on
Cross-Country Tour...
Case Showcases Ram LaramieLonghorn-Inspired Backhoe
Case Construction Equipment’s RamLaramie Longhorn-inspired 580 Super Nwide track backhoe loader which featuresthe iconic Ram Laramie Longhorn two-toneblack and white gold paint scheme, will tourthe country at Ram- and Case-sponsoredevents with a new Ram 3500 LaramieLonghorn Crew Cab 4x4 truck. Themachine also features a newly detailed cabdesigned to match the look and feel of theRam Laramie Longhorn interior, as well asnew chrome detailing and badges to give thebackhoe the distinctive Ram appearance. “Countless contractors rely on both the
durability and performance of Ram Trucksand Case Construction Equipment,” saidKatie Pullen, brand marketing manager,Case Construction Equipment. “Matchingthis truck and backhoe showcase two of theconstruction industry’s most enduring jobsite images — the rugged Ram 3500 duallyand the tireless Case backhoe loader. RamTruck is an excellent partner to Case, andwe’re excited to spend 2014 showcasingthese technologies together.”“The Ram 3500 heavy duty is by far the
most capable pickup truck on the market,and like Case Construction Equipment, is
no stranger to hard work. With its long listof best-in-class claims — including pay-load, power and towing — the Ram 3500 iswell suited for the job site,” said ReidBigland, president and CEO — Ram TruckBrand, Chrysler Group LLC. “The award-winning Laramie Longhorn model is loadedinside and out with distinctive Western-styledesign cues. With its matching Case back-hoe, this rig is a show-stopper.”The 580 Super N wide track features a
3.4-L, turbocharged 95 hp engine that burnscleaner while delivering superior horsepow-er, faster response and up to 5 percent betterfuel efficiency under load. The N Seriesmodels’ lifting capabilities outperform com-petitive backhoes by as much as 39 percentwhile running at low RPMs. Additionally,these machines deliver significant increasesin breakout force, lift and reach when com-pared to previous models, according to themanufacturer.For more information, visit
CASEce.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Case Construction Equipment’s Ram Laramie Longhorn-inspired 580 Super N widetrack backhoe loader features the iconic Ram Laramie Longhorn two-tone blackand white gold paint scheme.
Page 44 • August 9, 2014 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
Hyundai’s H930C Backhoe to Reach North America in 2015
Hyundai Construction EquipmentAmericas Inc.’s H930C backhoe is currentlyavailable to the Latin America market butwill be released in North America towardsthe end of 2015. This versatile machine ispractical for heavy duty jobs in variousapplications such as small trenching proj-ects, site preparation and road and utilitywork, according to the manufacturer.Hyundai’s H930C backhoe has an operat-
ing weight of 14,881 lbs (6,750 kg) and ispowered by an 87 hp (65 kW) Tier II Perkins1104C-44T engine. The engine combinesnew combustion technology with internalexhaust gas recirculation (EGR), long oilchange interval (600 hr) and an air gridheater as a cold start aid. The H930C boastsa loader bucket capacity of 28.3 cu. ft. (0.8cu m), a trenching bucket capacity of 6 cu. ft.(0.2 cu m) and a backhoe dig depth of 14 ft.3 in. (4.3 m).The H930C’s loader boom is integrally
welded with a large diameter tube, dual liftand tilt cylinders for maximum strength andpower. A strong and rigid loader frameallows for greater lift capacity, improved line
of site and overall visibility. The H930C’s four wheel drive system
improves mobility and loader performancein ground conditions underfoot and can beactivated on the go. The loader attachment isequipped with an automatic return to digfunction, designed to reduce loading cycletimes. The return to dig function returns theloader to the dig position when the operatorpulls the lever.The H930C’s backhoe boom also has a
robust design, perfect for heavy duty appli-cations. The boom allows for enhanced visi-bility into the trench when the operator isdigging around buried obstructions such aswater mains, sewer pipes and utility lines.Pilot controls offer the operator improvedprecision when excavating. An optionalextendable dipper significantly increases themachine’s versatility.Heavy duty front and rear axles are
designed to withstand the most demandingapplications. Outboard, planetary gearsimprove serviceability while multi wet discbrakes eliminate possible external contami-nation. The parking brake can easily be acti-
vated from within the cab by the push of anelectric switch.Hyundai’s H930C backhoe is available
with optional hydraulic performance fea-tures such as a load sensing hydraulic sys-tem, which matches the engine power to theappropriate hydraulic flow based on the loaddemand required. An adjustable flow controlsystem option allows the operator to divertany unused hydraulic fluid from the secondpump to the hydraulic reservoir.Lastly, a control pattern selection option
allows operators to change from ISO to SAEcontrol patterns simply by pressing a button.Operators can look forward to a large,
spacious cab in the H930C backhoe, whichwas designed for maximum comfort, safetyand low noise. Standard features include atilting, adjustable steering column, hinged-type side windows for excellent ventilation,conveniently located gauges, switches andlevers for quick and easy use and a suspen-sion seat with full adjustment for improvedoperator ride. One piece rounded front glassand large windows around the cab providethe operator with a full 360 degree range of
visibility. An AM/FM radio with MP3 inputalso contributes to a pleasant working envi-ronment. An optional climate control systemallows for full heating and defrosting and anoptional air conditioning system providesthe operator with optimum temperatureregardless of the weather.Service is hassle-free on the H930C back-
hoe with convenient access to key machinecomponents. A tilt-up hood makes theengine compartment easily accessible. Theone-piece hood tilts away for easy groundline access to all critical service and greasepoints for reduced maintenance time andoperator safety. The hydraulic oil sight gaugeis installed on the side of the hydraulic tankfor quick inspection from ground level. Anintegrated safety bar and locking pin are anintegral part of the loader arm and guaranteeoperator safety when servicing.For more information, call 877/509-2254
or visit www.hceamericas.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Hyundai’s H930C backhoe has an operating weight of 14,881 lbs(6,750 kg) and is powered by an 87 hp (65 kW) Tier II Perkins1104C-44T engine.
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 9, 2014 • Page 45
Page 46 • August 9, 2014 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
TLB840 Backhoe Loader Now Available in North AmericaPowered by an electronic, Tier IV interim
Perkins 1204E-E44TA engine and anoptional 4-speed servo power synchro trans-mission with automatic shifting, the 94-hp(70 kW) Terex TLB840 backhoe loader isnow available in North America. Engineeredto excel in digging, reaching, lifting andloading applications, North American cus-tomers will notice the TLB840 boasts hightorque, powerful performance, as well asstrong climbing and digging capabilities,according to the manufacturer. The Tier IVi-compliant engine on the
TLB840 is designed with EGR (exhaust gasrecirculation) technology, which is well-suit-ed for lower horsepower engines operatingin high-duty applications. EGR enginesincorporate diesel oxidation catalyst (DOC)systems and sometimes diesel particulate fil-ters (DPF) to reduce nitrogen oxide (NOx)and particulate matter exhaust emissions.The new Perkins Stage III B/Tier IViEGR engines, like the one in theTerex TLB840, include a DPFand allow auto-idle to be incor-porated in machine. “The Perkins DPF has a
10,000-hour service life, somaintenance needs arereduced,” said Jon
Beckley, Terex global product manager ofbackhoe loaders. “This backhoe loader doesnot require diesel exhaust fluid, also knownas AdBlue, or forced regeneration. Also, wehave had a long heritage of strong globalsupport with Perkins.” Also according to Beckley, “The Tier IVi
TLB840 offers 14.6 to 36.9 foot-poundhigher torque through the rev range than theprevious model. This means it is moreresponsive on pick-up under load and han-dling while transporting materials.”The curved boom design on
the TLB840 offers operatorsgreater clearance to reach overobstacles and the ability to loadcloser into trucks for greater pro-
ductivity. With a dig depth of 14 ft. 9 in. (4.5m) — extended to 18 ft. 1 in. (5.5 m) and areach up of 18 ft. 9 in. (5.7 m) — extended21 ft. 11 in. (6.7 m) — the TLB840 isdesigned with a slew system that provideshigh torque for easier backfilling and slew-ing uphill. For high-productivity trenching,this backhoe loader brags 7,958 lbf dippertearout and 11,892 lbf bucket tearout forces.With a loading height of 11 ft. 3 in. (3.4
m), the Tier IVi Terex TLB840 can easilyload high-sided trucks, and with a 10,485 lbfbucket breakout force, a loader lift capacityof 7,291 lbf and bucket capacity of 1.32 cu.yds. (1 cu m), this backhoe loader offershigh-capacity production. With “return to
dig” feature at the press of a button, theTier IVi TLB840 reduces cycle timesand provides quick loading capa-bility. The hydro mechanical self-leveling feature on the TLB840enables the operator to avoidspillage and allows for loadretention at full height. Thehydraulic unload button controlsthe loader’s lift speed, as well asboosts the machine’s pushingperformance.For more information, visit
www.terex.com/construction. (This story also can be found
on Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)
The 94-hp (70 kW) Terex TLB840 backhoe loader isnow available in North America.
Model Loader Loader Loader Backhoe Max Travel Speed Operating
SAE Life Capacity Breakout Force Loading Height Digging Depth 4th Gear Fwd Weight
HP (kw) lbs. (kg) lbs. (kg) ft. (m) ft. (m) MPH (kmh) lbs. (kg)
3CX 14 74 (55) 7670 (3479) 13,730 (6,228) 11.2 (3.40) 14.7 (4.45) 22.8 (36.7) 15,439 (7,005)
3CX 14 Super 91 (68) 7,670 (3,479) 13,603 (6,170) 11.2 (3.40) 14.7 (4.45) 22.8 (36.7) 15,439 (7,005)
3CX 15 Super 109 (81) 10,225 (4,638) 14,498 (6,590) 13 (3.96) 16.3 (4.95) 22.8 (36.7) 17,037 (7,730)
3CX 17 Super 109 (81) 10,225 (4,638) 14,498 (6,590) 14.4 (4.39) 17.7 (5.36) 22.8 (36.7) 17,515 (7,947)
4CX 14 Super 109 (81) 10,225 (4,638) 13,730 (6,228) 11.2 (3.40) 14.7 (4.45) 22.8 (36.7) 16,446 (7,462)
4CX 15 Super 109 (81) 10,225 (4,638) 16,387 (7,433) 13 (3.96) 16.3 (4.95) 22.8 (36.7) 18,225 (8,267)
4CX 17 Super 109 (81) 10,225 (4,638) 16,387 (7,433) 14.4 (4.39) 17.7 (5.36) 22.8 (36.7) 18,428 (8,359)
JCB
CHART from page 42
BL60B 91 (67.8) 6,658 (3,020) 11,623 (5,272) � 12.3 (3.7) 14.6 (4.5) � 22.0 (35.4) 15,587 (7070)
BL70B 101 (75.3) � 7,319 (3,320) 12,454 (5,649) 11.9 (3.6) 14.9 (4.5) � 21.1 (34.0) 17,439 (7910)VOLVO
TX760B 86 (64.3) 7,604 (3,449) 10,485 (4,756) 12.3 (3.74) 14.8 (4.5) 22.9 (36.9) 15,151 (6,887)
TLB840 94 (69.1) 7,291 (3,307) 10,485 (4,756) 11.7 (3.52) 14.9 (4.5) 25.6 (41.0) 15,895 (7,210)TEREX
Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • August 9, 2014 • Page 47
Money does grow on trees•• •
• •
Model Number Retail Price
Take advantage of Allied’s“Money does grow on trees”
does grow on trees
sales promotion that’s full of special Factory Authorized Retail Sales Prices.
does grow on trees
does grow on trees
does grow on trees
does grow on trees
does grow on trees
does grow on trees
s business partner has authorized some amazing
“Money does gr
Allied’
sales pr
does grow on trees
Factory Authorized Retail Sales Prices.
s business partner has authorized some amazing
ake advantage of Allied’TTake advantage of Allied’ow o“Money does grs full of special
does grow on trees
omotion that’sales prFactory Authorized Retail Sales Prices.
s business partner has authorized some amazing
s Allied’ ’s”seertnow o
s full of specialFactory Authorized Retail Sales Prices.
s business partner has authorized some amazing Allied’etail prices (r
hammer models. These models include Allied’Range Hammersand the ever popular with the unbr
These prices ar“Money does gr
chase, End-Users will rpurhoses, demolition tool,
eight*ee FrFrAllied Distributor and
s business partner has authorized some amazing (s see chart ces ( ) for End-Users on selected
hammer models. These models include Allied’Range Hammers (Model 555, Model 777 and Model 999) and the ever popular Compact Range Model
eakable trapezoidal tool. with the unbr
e not the only amazing part of this grThese prices arees” ow on tr“Money does gr . With each ferof
eceive standarchase, End-Users will rhoses, demolition tool, ee Mounting BracketFr
eight*. Delivery is to be arranged with your local Allied Distributor and etail financing 0% r
s business partner has authorized some amazing ) for End-Users on selected
s hammer models. These models include Allied’ Small (Model 555, Model 777 and Model 999)
Compact Range Model 522
eat e not the only amazing part of this gr. With each
d hydrauliceceive standaree Mounting Bracket and
. Delivery is to be arranged with your local etail financing for 12 months
Allied Distributor and is available thrThese special Factory Authorized Retail Prices will beavailable thrwhile supplies last.
isit an Allied Distributor location nearVa quality prjobsite demolition needs.
* For Alaska and Hawaii purchases, ther
Allied Distributor and etail financing 0% rells Fargo & Companyough Wis available thr
These special Factory Authorized Retail Prices will beough available thr , December 31, 2014 or ednesdayW
while supplies last.
est you to select isit an Allied Distributor location nears om Allied’oduct fra quality pr “Money T
jobsite demolition needs.
e will be additional fr and Hawaii purchases, ther re will be additional fr
etail financing for 12 months ells Fargo & Company (US only).
These special Factory Authorized Retail Prices will be, December 31, 2014 or
est you to select ee” r“Money T for your
eight charges. l fr reight charges.
Money does gr• Factory Authorized Retail Sales Prices
eesow on tr reesMoney does gr Factory Authorized Retail Sales Prices
Model 522 $9,500.00**
Model 777 $13,500.00**
Model Number Retail Price
Model 555 $9,500.00**
Model 999 $17,500.00**
**Plus applicable sales tax
$9,500.00**
$13,500.00**
Retail Price
$9,500.00**
$17,500.00**Model 999 $17,500.00**
Model 555 $9,500.00**
Model Number Retail Price
Model 777 $13,500.00**
Model 522 $9,500.00****Plus applicable sales tax
Model 522 $9,500.00**
Model 777 $13,500.00**
Model Number Retail Price
Model 555 $9,500.00**
Model 999 $17,500.00**
• ee Mounting Bracket Fr• d Hydraulic Hoses Standar
ee Mounting Bracket • eightee Fr Frd Hydraulic Hoses • ool Demolition T Tool
rtsnod Cliel©2014 A
Cts, LLucdorn Piotuc
Page 48 • August 9, 2014 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide
ASPHALT EQUIPMENT
Asphalt Cutters
Attachments InternationalASPHALT CUTTERSSEVERE SERVICE
HIGH SPEEDASPHALT CUTTER
Skid Steers, TLB, Loaders,Excavators
14 Models Available
''24-48 hour shipping''
SPECIAL PRICING!
Call 218-863-6444www.attachmentsintl.comwww.attachmentsusa.com
EXCAVATORS
Hydraulic Excavators
2008 Doosan DX340 Excavator & Shear,Genesis GXP500R Shear, replacementmeter, good condition...............$125,000.
440-439-4000
MATERIAL HANDLERS
Material Handlers
2007 Sennebogen 835 M-C scrap mate-rial handler, good condition, 15,526hrs............................................$125,000.
440-439-4000
Classified Rates:30 Words or Less for $30.00.Each Additional Word is 95¢.
For just an additional $20 your ad can beposted on our online searchable database for
30 daysAd runs for 2 (two) insertions - no changes in
second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:
470 Maryland Drive• Fort Washington, PA 19034
215/885-2900Fax 215/885-2910
Toll Free 1-800/523-2200
CLASSIFIEDS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 49
YOUR VISION. BUILT TO SPEC.eeo sy tsas e’tI oYo bs aaedr iaely cttere pvau h eeu not ynempiuqe et thuob e o w. Sdeeccuo sd te. eeo sy tsas etI oYo
euls a bm aed thesu
sledoe mmarf-egraln os as alotrnot coofon mraeo l. T To lpu uoy
bs aaedr iaely cttere pvau hd Siks SeireS-r Eur oot fnirpe
oe clbahctiwd setnau wo. Y Yosu wo. Y Yosledol mln an ootipn ot oisir vr oelaer duoe ye, sero
eeu not ynempiuqe et thuobe frod metnau wo. Y Yosreetd S
e Ilbatceler seffe o. Wslotrnot hnemhcattr aeisad eetnau w
.etisber wut o
e o w. Sdeeccuo sd ted eveihce a. Wmoot roo
d n, anrettap-, HOSe Id ekooe h. Wpukoot h
Irving, TX972/438-4699
Fort Worth, TX817/566-1541
Hewitt, TX254/666-3900
Pflugerville, TX512/272-4141
New Braunfels, TX830/632-3100
Laredo, TX956/718-1909
Flagstaff, AZ928/526-0639
Phoenix, AZ602/415-4700
Prescott, AZ928/776-8300
Tucson, AZ520/294-5262
Lakeside, CA619/370-4300
Riverside, CA951/778-3700
Indio, CA760/342-8900
Imperial, CA760/355-4331
PO Box 31388Amarillo TX 79120806/335-1681
806/335-3932 Fax
Lubbock TX806/763-0473
Odessa TX432/580-3337
Abilene TX 325/677-2291
San Angelo TX325/651-3337
Wichita Falls, TX940/322-3337
Enid OK580/233-5000
Tulsa OK918/245-5926
McAlester OK918/423-2555
Albuquerque, NM2301 Candelaria Rd.
NE505/884-2900
Colorado Springs, CO1100 E. Cheyenne Rd.
719/475-1100
El Paso, TX11323 Rojas Drive915/598-1133
Farmington, NM1100 Troy King Rd.
505/326-1101
Fort Collins, CO125 John Deere Dr.970/482-7154
Frederick, CO3763 Monarch St.303/833-5900
Hobbs, NM2400 W. Bender Blvd.
575/392-6923
Pueblo West, CO685 E. Enterprise Dr.
710/547-3505
RDO EQUIPMENT CO.www.rdoequipment.com
4 RIVERS EQUIPMENTwww.4riversequipment.com
YELLOWHOUSE MACHINERY CO.www.yellowhouse.us
Page 50 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CALIFORNIA
TEXAS
UTAH
SEE WHO WINS GOING HEAD-TO- HEAD.Do you want to see how compact track loaders perform in head-to-head competitions or watch side-by-side comparisons relating to performance, serviceability and durability? Before you buy your next loader, watch our video comparisons of compact track loaders. Not only do the videos show you which loader is best, they explain the small details that increase your performance and reduce your downtime. You can watch all the videos at BobcatAdvantage.com/CTLFaceOff11 and find out who comes out on top.
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2014 Bobcat Company. All Rights Reserved. | 0714153
BobcatAdvantage.com/CTLFaceOff11
ONE VS MANYCOMPACT TRACK LOADERS FACE OFF
sreal Detacbo BdzeirohtAu
lalaf Dt oacboBhtciwhtcidyelalv.www3 888- •9593-488-163tishr CsuporC
supr Coff Co ott ocabBoSATEX
sotirrecfotacbo.bwww2423-629-625
sotrirCeotirr Cef otcabBoINROIFLAC
J39
cobBalv.www59H
cabBoo.bwww19
cboB
sla
moc.h9313-653
ititisr Ch
mo.cs2
c. In,sA
ill V9076-908-6
oeronContsou Hff H ota
moc.htciwhtcidyelal0043-5246-
gennilraHnegnilr Haf otca
mo.cosaplefotacbo4511860--5
osal PEosal Pf Et oac
salladfotacbo.bwww745-58573-09
wevignLo8966- 8 •0006-85-964
eillvsiweL0222-456-718htor WtorF
lalaf Dt oacboB
www02-262-108seW
moretIn
ob.www137P
8-774-182reJ
mo.c7
5090-18
02
sla
mo.ctacboimb.w4036-055-88 8 •8002
ytiy Cellat Vstcab Boniatnumo
HTAU
moc.ontsuohfotacb0022-134-13
dnlaraeP9646-166 888- •846
egaill Vyesr
A Qualitative Assessment...
Equipment Leasing, FinanceConfidence Remains SteadyThe Equipment Leasing & Finance
Foundation (the Foundation) released theJuly 2014 Monthly Confidence Index forthe Equipment Finance Industry (MCI-EFI)July 22. Designed to collect leadership data,the index reports a qualitative assessment ofboth the prevailing business conditions andexpectations for the future as reported bykey executives from the $827 billion equip-ment finance sector. Overall, confidence in the equipment
finance market is 61.4, unchanged from theJune MCI-EFI. When asked about the outlook for the
future, MCI-EFI survey respondent AdamD. Warner, president, Key EquipmentFinance and chairman of the EquipmentLeasing and Finance Association (ELFA),said, “I don't believe that the dramatic con-traction of the U.S. economy in Q1 shouldbe blamed on winter weather. There areunderlying concerns by businesses and con-sumers that real unemployment has beentoo high for too long and not enough of thefederal incentives are around job creation.Additionally, the federal government’sinability to collaborate on growth initiativesis having a lasting toll on confidence.”
July 2014 Survey ResultsThe overall MCI-EFI is 61.4, unchanged
from the June index.• When asked to assess their business
conditions over the next four months, 28.6percent of executives responding said theybelieve business conditions will improveover the next four months, up from 23.5 per-cent in June. 68.6 percent of respondentsbelieve business conditions will remain thesame over the next four months, down from70.6 percent in June. 2.9 percent believebusiness conditions will worsen, down from5.9 percent who believed so the previousmonth.• 25.7 percent of survey respondents
believe demand for leases and loans to fundcapital expenditures (capex) will increaseover the next four months, up from 17.6 per-cent in June. 68.6 percent believe demandwill “remain the same” during the samefour-month time period, down from 79.4percent the previous month. 5.7 percentbelieve demand will decline, up from 2.9
percent who believed so in June.• 25.7 percent of executives expect more
access to capital to fund equipment acquisi-tions over the next four months, down from26.5 percent in June. 74.3 percent of surveyrespondents indicate they expect the “same”access to capital to fund business, anincrease from 73.5 percent in June. No oneexpects “less” access to capital, unchangedfrom the previous month.• When asked, 37 percent of the execu-
tives reported they expect to hire moreemployees over the next four months, adecrease from 44 percent in June. 60 percentexpect no change in headcount over the nextfour months, up from 50 percent last month.2.9 percent expect fewer employees, downfrom 5.9 percent who expected feweremployees in June.• 5.7 percent of the leadership evaluates
the current U.S. economy as “excellent,” upfrom 2.9 percent last month. 88.6 percent ofthe leadership evaluates the current U.S.economy as “fair,” a decrease from 91.4percent in June. 5.7 percent rate it as “poor,”unchanged from the last three months.• 22.9 percent of the survey respondents
believe that U.S. economic conditions willget “better” over the next six months, adecrease from 29.4 percent who believed soin June. 74.3 percent of survey respondentsindicate they believe the U.S. economy will“stay the same” over the next six months, anincrease from 70.6 percent in June. 2.9 per-cent believe economic conditions in theUnited States will worsen over the next sixmonths, up from none last month.• In July, 25.7 percent of respondents
indicate they believe their company willincrease spending on business developmentactivities during the next six months, adecrease from 35.3 percent in June. 74.3percent believe there will be “no change” inbusiness development spending, an increasefrom 61.8 percent last month. None believethere will be a decrease in spending, adecrease from 2.9 percent who believed solast month.For more information, visit
www.LeaseFoundation.org.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 51
© 2014 Yanmar America Corp.
RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM.Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR.
RuleTheJobsite.com
Corp.anmar America 2014 Y Yanmar America ©
Alamo, TX956-782-5580
Amarillo, TX806-622-2407
Corpus Christi, TX361-887-8499
Denham Springs, LA 225-665-7900
Waco (Ross), TX254-829-9655
Irving, TX 972-255-3500
Houston (Cypress), TX281-671-6000
Kilgore, TX 903-988-9868
Lubbock, TX 806-745-1245
Round Rock, TX 512-244-0505
San Antonio, TX78219
210-337-7700
Ditch Witch of Oklahoma/TulsaEdmond, OK 73034
405-348-4633
Tulsa, OK 74116918-438-1560
RGW Equipment Saleswww.rgwequipmentsales.com
550 Greenville RoadLivermore, CA 94550
925-606-2403925-606-2493 Fax
Vermeer of Texas-Louisianawww.vermeertexas.com
Page 52 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
THINK. AHEAD.
Meeting emissions regulationsdemands forward thinking. AndJohn Deere has always beenahead of the game. So when youasked for simple, proven InterimTier 4-certified technology thatwon’t hold you back, weanswered. First with the 744K,*and now with the IT4-certified644K and 724K Loaders. Ouremissions technology is simpleto operate and maintain. And itdelivers the power, fuel efficien-cy, reliability, and low cost ofownership you’ve come to expectfrom John Deere. Need a partnerfor emissions solutions? We’reOn It™.
* First machine over 75 hp in the indus-try to be certified to meet U.S. InterimTier 4 emissions.
Flagstaff5500 East Penstock Ave
Flagstaff, AZ 86001928-526-0639
Phoenix2649 N 29 Ave
Phoenix, AZ 85009602-415-4700
Prescott1091 Commerce Drive
Prescott, AZ 86035928-776-8300
Tucson5051 S Outlet Center
DriveTucson, AZ 85706
520-294-5262
Lakeside10108 Riverford RoadLakeside, CA 92040
619-270-4300
Riverside20 Iowa Avenue
Riverside, CA 92507951-778-3700
Indio83-300 Avenue 45Indio, CA 92201760-342-8900
Imperial3275 Hwy 86
Imperial, CA 92251760-355-4331
Irving3230 East Airport
FreewayIrving, TX 75062972-438-4699
Fort Worth5301 Mark IV ParkwayFort Worth, TX 76131
817-566-1541
Hewitt215 Enterprise BlvdHewitt, TX 76673
254-666-3900
Pflugerville16415 N IH-35
Pflugerville, TX 78660512-272-4141
New Braunfels19275 N IH-35
New Braunfels, TX78132
830-632-3100
Laredo5615 Hwy 359
Laredo, TX 78045956-718-1909
PAPE MACHINERYwww.papemachinery.com
RDO EQUIPMENT CO.www.rdoequipment.com
Newark800-231-2060510-790-3600
Fax: 510-790-9120
Sacramento800-227-3399916-922-7181
Fax: 916-922-4532
French Camp800-619-6319209-983-8122
Fax: 209-983-1105
Fowler559-834-4774
Fax: 559-834-4754
Rohnert Park800-325-9401707-584-9161
Fax: 707-584-4786
Gilroy800-848-4150408-848-4150
Fax: 408-848-5163
Redding530-241-4555
Fax: 530-241-0619
HONNEN EQUIPMENT CO.www.honnen.com
5055 E. 72nd Ave.Commerce City, CO
303-287-7506800-646-6636
Durango, CO970-247-4460
Grand Junction, CO970-243-7090
Ogden, UT801-627-0049
Salt Lake City, UT801-262-7441
St. George, UT435-652-8003
Casper, WY307-266-4474
Gillette, WY307-685-4288
Rock Springs, WY307-382-5284
Idaho Falls, ID208-523-9915
4 RIVERS EQUIPMENTwww.4riversequipment.com
Albuquerque, NM2301 Candelaria Rd. NE
505-884-2900
Colorado Springs, CO1100 E. Cheyenne Rd.
719-475-1100
El Paso, TX11323 Rojas Drive
915-598-1133
Farmington, NM1100 Troy King Rd.
505-326-1101
Fort Collins, CO125 John Deere Dr.
970-482-7154
Frederick, CO3763 Monarch St.
303-833-5900
Hobbs, NM2400 W. Bender Blvd.
575-392-6923
Pueblo West, CO685 Enterprise Drive
719-547-3505
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 53
We’ve got you covered
Scan for Free Demo
5-Year
Extended
Excavator
Warranty
Ask your dealer
for details.
jobsite tough
ear 5 Ex
tor
5-Y
ty
Extended
a l
Excavator
W
k y
t ils
arrantyWAsk your dealer
d tails
APCO Equipment Corp.3432 N. 5th Street
North Las Vegas, NV 89032702-871-7474
Fax: 702-368-0871www.apcoequipment.com
Williston, ND701-248-8080
A-Z Equipment Rentals & Saleswww.a-zequipment.com
East Valley/Gilbert1313 E. Baseline Rd.Gilbert, AZ 85233
480-539-8700
North Phoenix602-992-1150
West Valley623-925-0200
Central Phoenix602-995-5100
Rifle Equipment, Inc.1605 Airport Rd.Rifle, CO 81650970-625-2580
TF: 866-427-7970www.rifleequipment.com
Page 54 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KIRBY-SMITHMACHINERY, INC.
www.kirby-smith.com
6715 W. RenoOklahoma City, OK 73137
800/375-3339Fax: 405/787-5973
12321 E. Pine St.Tulsa, OK 74116800/375-3733
Fax: 918/437-7065
1629 Vision Dr.Abilene, TX 79602877/577-5729
3922 I-40 EastAmarillo, TX 79103800/283-1247
8505 So Central ExpwyDallas, TX 75241800/753-1247
1450 NE Loop 820Fort Worth, TX 76106
877/851-9977
3201 E Slaton RdLubbock, TX 79404
866/289-6087
7301 East I-20Odessa, TX
877/794-1800432/333-7000
© 2008 ESCO Corporation.
Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (Only one machine per Bargain Ad)
and a maximum 17 word description plus contact and phone number.
• Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• The ad will run for two consecutive issues.
For more in fo rmat ion , ca l l Const r uc t ion Equ ipment Gu ide today a t
800/523-2200
The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $95
“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 3000 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95Next day shipping to 23 states.....................................................................Call
Summit Supply LLC888-888-1248 • [email protected] 15-16 TM
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.
Call McLaren 888-492-4230 16-17 FS
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning;less ground damage; fully rebuildable; interchangeableshoe types.
Call McLaren 888-492-4230 16-17 FS
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regularpneumatic tires; rims included; same day shipping; various tire sizes available.
Call McLaren 888-492-4230 16-17 FS
The Stabilizer Lock mechanically locks the stabilizerarm of all backhoes in the downward position, raising awheel off the ground.
The Equipment Lock CompanyVisit www.equipmentlock.com or
call toll free 1.866.Lok it up (565-4887) 16-17 EB
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 55
CAT 450 AND 450-C MILLING MACHINESCONTACT: TOM ROSSERPHONE: 610-888-0762EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATORS | HITACHI ZX 210 - 2012TO 2014 LESS 1000 HOURS KOMATSUPC 210 - 2012 TO 2014 LESS 1000HOURS CATERPILLAR 320 - 2012 TO2014 LESS 1000 HOURS BACKHOELOADER NEWCONTACT: EMANUEL FERNANDESPHONE: +351 916494618EMAIL:[email protected]––––––––––––––––––––––––––––––––TEREX TS14G SCRAPER | LOOKINGFOR ONE TS14G, LATE MODEL WITH5,000 HOURS OR LESS, CAB, AC, PUSHPULLCONTACT: ADT RESOURCES INC.PHONE: 510-338-3023EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY USED CATERPILLARWHEEL LOADERS 920, 926, 930, 936,938F/G, 950B/C/E/F, 966C/D/E/F/H,980C/F AND 988B. IF YOU HAVE ANY,PLEASE OFFER ME WITH PICTURES,SERIAL NUMBER, CONDITION, LOCA-TION AND FINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR CAT WHEEL LOADERS,910, 920, 930, 950, 950B, 950E, 966DHERE IN USA, OR AUSTRALIA UNAD-VERTISED & WHOLESALE PRICECONTACT: ROYAL TRADERSEMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A MID SIZE EXCAVATORFOR CUSTOMER. SMALL - MID SIZE15000-18000 POUNDS. BLADE, BUCKET.PREFER SOMETHING IN THE NJ/NYAREA.CONTACT: JIM FARMER AAA HEAVYEQUIPMENT BROKERSPHONE: 732-998-2254EMAIL:[email protected]––––––––––––––––––––––––––––––––GRADER 12 GCONTACT: NORBERTPHONE: 240-593-5021EMAIL: [email protected]––––––––––––––––––––––––––––––––WANT PURCHASE SEVERAL 1994-2005SCHWING CONCRETE BOOM FROM36M TO 54M PLEASE SEND US MODEL ,DETAIL, PICTURE & PRICESCONTACT: LISEPHONE: 819-635-3577EMAIL: [email protected]––––––––––––––––––––––––––––––––HYDRAULIC MIXER DRIVE | WE WANTTO BUY USED CEMENT MIXER TRUCKDRUM HYDRAULIC GEAR BOXES (MIXER DRIVE GEAR BOXES) , P & PKOLD OR NEW MODEL MUST BE INWORKING CONDITION PLEASE SEND
ME , DETAIL , PHOTO , QUANTITY &YOUR BEST SERIOUS EXPORT PRICESCONTACT: M.ASKARIPHONE: 819-246-9577EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU D57S1 TRACK LOWERCONTACT: DOUGPHONE: 256-590-2901EMAIL: [email protected]––––––––––––––––––––––––––––––––LONG REACH BOOM COMPLETE, FORA 330 CAT EXCAVATORCONTACT: GARYFAX: 985-702-1173EMAIL: [email protected]––––––––––––––––––––––––––––––––SCHWING CONCRETE BOOM PUMPS |28 METER TO 39 METERS LOOKINGFOR SEVERAL MACHINES YR 94 THRU2005CONTACT: WILLIAM CROSSPHONE: 407-595-8221FAX: 407-843-0247EMAIL:[email protected]––––––––––––––––––––––––––––––––WABCO - LETOURNEAU C-PULL ENDDUMPCONTACT: RANDY MPHONE: 785-948-2231EMAIL: [email protected]––––––––––––––––––––––––––––––––SUPER SUCKER TRUCK/ GUZZLERTYPE | HYDRO EXCAVATOR OR GUZ-ZLER CLASSICCONTACT: DAN YELLEMAIL: [email protected]––––––––––––––––––––––––––––––––TEREX BACKHOE 760B 4 X 4 EX-HOELOW HOURS 26000$ MAXCONTACT: RICH SCHNOORPHONE: 561-222-1106EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D9H D9L D9N D9R D10NWITH RIPPER USER USA | WANT TOBUY 12 MONTHS BULLDOZERS NOTADVERTISE ONLY USA «CONTRAC-TORS ONLYS BULLDOZER D9H WITHRIPPER D9L D9N D9R D10N ALL THETIMES WITH RIPPER NOT ADVERTISEAND NO HACKER USERCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 ORMOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––BACKHOE NEW HOLLAND LB90 INGOOD CONDITIONCONTACT: LOUPHONE: 201-410-1090FAX: 201-727-1010EMAIL: [email protected]––––––––––––––––––––––––––––––––1978 VINTAGE HOUGH AXLES | HOUGHINTERNATIONAL DRESSER 1978 VIN-TAGE PARTSCONTACT: LLOYD BRUSHWEINPHONE: 1-207-324-2437FAX: 1-207-490-6795EMAIL:[email protected]––––––––––––––––––––––––––––––––
CAT HD 24" BUCKET WITH A QUICKCOUPLER.CONTACT: KATHYEMAIL: [email protected]––––––––––––––––––––––––––––––––CLAMSHELL BUCKETS/ALL SIZES/ ANDTYPES/ROCK /GRAPPLES/ALLSIZES/TYPES!CONTACT: JACK JOHNSONPHONE: 813-390-8626EMAIL: [email protected]––––––––––––––––––––––––––––––––MITSUBISHI | DOZER, LOADER, GRAD-ER, DUMPER, ENGINES, RUNNING ORNOT.CONTACT: STANPHONE: 253-536-0600EMAIL: [email protected]––––––––––––––––––––––––––––––––WELDING MACHINE VANTAGE 300 ORLINCOLN CLASSIC 300DCONTACT: CARLOS DIAZPHONE: 8326292447EMAIL: [email protected]––––––––––––––––––––––––––––––––HITACHI EX400 TRACK PAD BOLTS &NUTS | HITACHI EX-400 LC EXCAVATORI NEED A DELIVERED $ PRICE TO ZIPCODE: 15473 FOR 424 EACH TRACKPAD BOLTS (PART # SI-651) 424 EACHTRACK PAD NUTS (PART # SI-652)CONTACT: CLIFFFAX: 724-736-4998EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A ROADTEC RP170 INGOOD CONDITION TO BE EXPORTEDTO AUSTRALIA.CONTACT: BEN HEMMERLINGPHONE: 61412718267EMAIL:[email protected]––––––––––––––––––––––––––––––––SCHWING CONCRETEPUMP BOOMTRUCKS | SCHWING BOOM TRUCKS32M TO 39M 93 TO 2005CONTACT: WILLIAM CROSSPHONE: 407-595-8221FAX: 407-843-0247EMAIL:[email protected]––––––––––––––––––––––––––––––––MACK TRIAXLE DUMP TRUCK (19952005) | SMALL PAVING COMPANYSEEKS TO BUY TRI-AXLE DUMP TRUCKIN REASONABLE CONDITION WITHSTEEL BODY AND PINTLE HITCH FORDAILY USECONTACT: DAVE BAKERPHONE: 443-799-6625FAX: 410-484-5785EMAIL:[email protected]––––––––––––––––––––––––––––––––CARRIAGE & FORKS FOR CAT TH560BCONTACT: LOUIE VERMETTEPHONE: 508-946-1409FAX: 508-947-5371EMAIL:[email protected]––––––––––––––––––––––––––––––––PICKUP TRUCKEMAIL: [email protected]––––––––––––––––––––––––––––––––
CONCRETE BOOM PUMPS , USED 1992-2002 SCHWING 47M , 52M , 54M THETRUCK OF PUMP IS NOT IMPORTANTFOR US BUT THE PUMP MUST BE INGOOD WORKING CONDITION & OUT-RIGGER OF PUMP MUST BE X-STYLECONTACT: M.ASKARIPHONE: 819-246-9577EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT CP-433 PADFOOT COMPACTIONROLLER.CONTACT: BILL BUTLERPHONE: 770-231-4662EMAIL: [email protected]––––––––––––––––––––––––––––––––USED CATERPILLAR WHEEL LOADERS920, 926, 930, 936, 938F/G, 950B/C/E/F,966C/D/E/F/H, 980C/F AND 988B. IF YOUHAVE ANY, PLEASE OFFER ME WITHPICTURES, SERIAL NUMBER, CONDI-TION, LOCATION AND FINAL OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––EQUIPMENT TRAILER | 18 - 25 12000-14000 LB. EQUIPMENT TRAILERCONTACT: RUSSEMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A PACKAGE DEAL ON A75HP-90HP SKID STEER, TRAILER,TREE CUTTING ATTACHMENTS, GRAP-PLE BUCKET, FORKS, BRUSH CUTTER,ECTCONTACT: MICHAELPHONE: 405-519-6606EMAIL: [email protected]––––––––––––––––––––––––––––––––LOADER WITH BUCKETCONTACT: 943-949-2767EMAIL: [email protected]––––––––––––––––––––––––––––––––500MW GAS FIRED COMBINED CYCLEPOWER PLANTS | REQUIRED: 500 MWGAS FIRED COMBINED CYCLE POWERPLANTS / MANUFACTURED IN 2000 ORLATER 60 HZ / PREFERRED BRANDS:GE OR SIEMENSCONTACT: VICTOR LEBRONPHONE: 864-590-1700EMAIL:[email protected]––––––––––––––––––––––––––––––––CAP GLAND FOR SCAT TRAK 1300C/CX| WE HAVE A SCAT TRAK 1300C/CXNEED PARTS FOR.CONTACT: LINDAPHONE: 508-393-8877FAX: 508-393-7687EMAIL: [email protected]––––––––––––––––––––––––––––––––SEWER BUCKET MACHINE | THISMACHINE COMES AS SETCONTACT: ALIEMAIL: [email protected]––––––––––––––––––––––––––––––––
185 CFM TOW BEHIND COMPRESSOR |WOULD LIKE IT IN FLORIDA, GA SCCONTACT: WOODY JUDSONPHONE: 305-942-6335FAX: 305-289-3960EMAIL:[email protected]––––––––––––––––––––––––––––––––SMALL TRACTOR ANY BRAND | TRAC-TOR WITH 3 POINT HITCH AND WOULDCONSIDER TILLER AND MOWER IN 20HP RANGECONTACT: RALPH WELLSPHONE: 864-529-2961 • 864-578-2442EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAWCRUSHER | LATE MODEL, LOW HOUR,USA LOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––D9T SINGLE SHANK RIPPER ASSEMBLY| NEED A D9T COMPLETE RIPPERASSEMBLY. SOUTH AREA PREFERRED,TEXAS WOULD BE GOODPHONE: 510-338-3023EMAIL: [email protected]––––––––––––––––––––––––––––––––SCREEN MACHINE THE 612T TROMMELCONTACT: BOB DELOZIERPHONE: 909-478-4791EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED COMPLETE REAR AXLE FROMDYNAPAC CA12. WOULD TAKE ENTIRENON-RUNNING MACHINE.CONTACT: NEIL SCHERRPHONE: 320-763-4491FAX: 320-762-1231EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED USED RIPPER FOR D9N DOZER |I AM LOOKING TO BUY USED SINGLESHRANK RIPPER FOR CAT DOZER D9NIF YOU HAVE FOR SALE PLEASE EMAILME PHOTOS, PRICE AND LOCATION.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY SCRAP MACHINERY |WANTED SCRAP MACHINERY. WILLMOVE FOR FREE.CONTACT: BRIAN POFFPHONE: 313-948-0736EMAIL:[email protected]––––––––––––––––––––––––––––––––PARTS MANUAL & SERVICE MANUALFOR HITACHI EX60 S#10F0559PHONE: 724 238 4945EMAIL: [email protected]––––––––––––––––––––––––––––––––SCHWING CONCRETE PUMP | 32M TO39 METER ON MACK TRUCKCONTACT: WILLIAM CROSSPHONE: 407 595 8221FAX: 407 843 0136 |EMAIL:[email protected]––––––––––––––––––––––––––––––––
LOOKING FOR A ROOT RAKE GRAPPLEUSED TO FIT A CAT 931C LOADERCONTACT: JOHN RATLIFFPHONE: 276-608-1507FAX: 276-591-1239EMAIL:[email protected]––––––––––––––––––––––––––––––––2 CYLINDERS DUETZ USED ENGINES |ANY QUANTITY FROM 2 CYLINDERSDIESEL ENGINES TYPE F2L511 ORF2L912CONTACT: RAAFAT NAKHLAPHONE: 002122149052FAX: 00202257744654EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A TRACK SKID STEER-AROUND 65 TO 70 HP | CASE-CAT-JOHN DEERE OR MUSTANGCONTACT: BOBFAX: 1-315-834-6850EMAIL: [email protected]––––––––––––––––––––––––––––––––AIR COMPRESSOR 185 OR 260CONTACT: RAULPHONE: 216-571-1226FAX: 216-351-3104EMAIL:[email protected]––––––––––––––––––––––––––––––––BOMAG ROLLER 12 TON VIBRATORYSMOOTH DRUMCONTACT: KENNETH KUPAPHONE: 072 125 4159FAX: 086 239 7582EMAIL:[email protected]––––––––––––––––––––––––––––––––WHEEL LOADERS | I AM LOOKING TOBUY USED CATERPILLAR WHEELLOADERS 920, 926, 930, 936, 938F/G,950B/C/E/F, 966C/D/E/F/H, 980C/F AND988B. PLEASE SEND PICTURES, SERI-AL NUMBER, CONDITION, LOCATIONAND FINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]–––––––––––––––––––––––––––––––– 40,000 CFM PORTABLE BAGHOUSE |APPROX. 40,000 CFM & A 100-TON SILOW/WEIGH HOPPER, PREFERPORTABLE.CONTACT: CLARK LONEYPHONE: 651-351-1277FAX: 707-929-0569EMAIL:[email protected]–––––––––––––––––––––––––––––––– DP 2800 ATLAS COPCO PULVERIZER |CONTACT: LO GOPHONE: 8092713200EMAIL:[email protected]––––––––––––––––––––––––––––––––
BULLDOZER D3GLGP D4GLGP ENCCAB UNDER 600 HRS | UNDERCAR-RIAGE NEW, WINCH, USA CONTRAC-TORS NO HACKER I NEED PROOF OFOWNERSHIPCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 38 68975EMAIL:[email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:
www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
Page 56 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERS
www.lyonauction.com315-633-2944�
• Detroit, MISat., August 9, 2014For: Rental Return Sale ConstructionEquipment
• Kissimmee, FLWed., August 13, 2014For: Late Model ConstructionEquipment
• Elmira, NYSat., August 16, 2014For: Aggregate & ConstructionEquipment
• Portland, MESun., August 17, 2014For: Complete LiquidationConstruction Equipment
• Houston (Deer Park), TXMon., August 25, 2014For: Hertz Equipment Rentals
• Houston, TXTues., August 26, 2014For: Very Late model Cat, Volvo,Komatsu Rental Fleet ConstructionEquipment
• New Orleans, LASat., September 6, 2014For: Liquidation Large RentalCompany
• Lima, PeruFri., September 12, 2014For: Late Model & NewConstruction Rental Fleet Equipment& more
• Odessa, TXWed., September 17, 2014For: Late model Cat, John DeereConstruction Equipment
• Corpus Christi, TXThurs., September 18, 2014For: Construction Equipment
• Las Vegas, NVSat., September 20, 2014For: Cat & John Deere ConstructionEquipment
• Atlantic City, NJSat., September 27, 2014For: Late Model Rental Returns
• Atlanta, GATues., September 30, 2014For: Cat, John Deere & KomatsuConstruction Equipment
• Mobile, ALWed., October 1, 2014For: Major Job Completion
• Boston, MASat., October 11, 2014For: Late model Snow Removal &Construction Equipment
• Racine, WISat., October 18, 2014For: Late Model Construction &more
• Bangor, MESat., October 25, 2014For: Late Model Construction &Rental Fleet Equipment
RITCHIE BROS. AUCTIONEERS
www.rbauction.com402-421-2631
• Los Angeles, CAAugust 12, 2014
• Williston, NDAugust 13, 2014
• Orlando, FLAugust 14, 2014
• Sacramento, CAAugust 14, 2014
• Albuquerque, NMAugust 20, 2014
• Tuscaloosa, ALAugust 20, 2014
• Reno, NVAugust 22, 2014
• Myrtle Beach, SCAugust 26, 2014
• Houston, TXAugust 27-28, 2014
• North East, MDAugust 28, 2014
• Las Vegas, NVSeptember 5, 2014
• Tipton, CASeptember 9, 2014
• Phoenix, AZSeptember 12, 2014
• Salt Lake City, UTSeptember 16, 2014
• Atlanta, GASeptember 18, 2014
• Minneapolis, MNSeptember 19, 2014
• Gillette, WYSeptember 23, 2014
• Nashville, TNSeptember 23, 2014
• Kansas City, MOSeptember 26, 2014
• Raleigh-Durham, NCSeptember 30, 2014
• St. Louis, MOSeptember 30, 2014
BAR NONE AUCTIONwww.barnoneauction.com866-372-1700�
• Sacramento, CASat., August 9, 2014For: Heavy Equipment & Used CarAuction
• Riverside, CASat., August 16, 2014For: Heavy Equipment & Used CarAuction
• Phoenix, AZThurs., August 21, 2014For: Construction Equipment &Utility Truck Auction
• Portland, ORThurs., August 28, 2014For: Heavy Equipment & Used CarAuction
• Sacramento, CASat., September 13, 2014For: Heavy Equipment & Used CarAuction
• Riverside, CASat., September 20, 2014For: Heavy Equipment & Used CarAuction
BIG IRONwww.bigiron.com800-937-3558�
• ONLINE ONLYAugust 13, 2014
• ONLINE ONLYAugust 20, 2014
• ONLINE ONLYAugust 27, 2014
• ONLINE ONLYSeptember 3, 2014
• ONLINE ONLYSeptember 10, 2014
• ONLINE ONLYSeptember 17, 2014
• ONLINE ONLYSeptember 24, 2014
• ONLINE ONLYOctober 1, 2014
• ONLINE ONLY
October 8, 2014
• ONLINE ONLYOctober 15, 2014
• ONLINE ONLYOctober 22, 2014
BUNCH BROTHERS
AUCTIONEERS
www.bunchbrothers.com270-376-2992�
• East Peoria, ILThurs., August 14, 2014For: Heavy Construction Equipment
CAT AUCTION SERVICES
www.catauctions.com866-750-9432�
•ONLINE ONLYWed., August 20, 2014For: eQuipment Yard
DAVIS AUCTIONS
www.davisauctionsinc.com�203-758-4087
• Prospect, CTSat., September 27, 2014For: Construction Equipment
• Prospect, CTSat., December 13, 2014For: Construction Equipment
DON SMOCK AUCTION CO., INC.
www.dsa-auctions.com765-778-9277
• Pendleton, INFri., September 19, 2014For: 22nd Annual Fall Auction
• Lucasville, OHSat., October 18, 2014For: 10th Annual Southern OhioConsignment Auction
EQUIFY AUCTIONS, LLC
www.equifyauctions.com�903-873-6777
• Wills Point, TXThurs., August 21, 2014For: Heavy Construction Equipment
HENDERSON AUCTIONS
www.hendersonauctions.com225-686-2252
• Carencro, LASeptember 24 - 25, 2014For: 2 Day Contractor’s Auction
HESS AUCTIONEERS
www.hessauctioneers.net�866-511-2493
• Marietta, PAFri., August 22, 2014For: Truck, Trailer & EquipmentAuction
HILCO INDUSTRIAL, LLC
www.hilcoind.com�877-37-HILCO
• Missouri City, TXJuly 23 – August 22, 2014For: Private Treaty Sales for GlobalGeophysical Services
HUNYADY AUCTION COMPANY
www.hunyady.com�800-233-6898
• Fallston, MDWed., August 13, 2014For: Construction EquipmentComplete Liquidation
• Pittsburgh, PAWed., August 27, 2014For: Absolute Auction CompleteLiquidation
I.R.A.Y. AUCTION
www.iraymn.com�320-968-7230
• Foley, MNFri., September 12, 2014For: Heavy Construction Equipment,Truck & Trailer
• Foley, MNFri., December 5, 2014For: Heavy Construction Equipment,Truck & Trailer
IRON PLANET AUCTIONS
www.ironplanet.com�888-433-5426
ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to place yourbid!
• ONLINE ONLYAugust 14, 2014
• ONLINE ONLYAugust 21, 2014
• ONLINE ONLYAugust 28, 2014
• ONLINE ONLYSeptember 4, 2014
• ONLINE ONLYSeptember 11, 2014
• ONLINE ONLYSeptember 18, 2014
• ONLINE ONLYSeptember 25-26, 2014
• ONLINE ONLYOctober 2, 2014
• ONLINE ONLYOctober 9, 2014
• ONLINE ONLYOctober 16, 2014
• ONLINE ONLYOctober 23, 2014
• ONLINE ONLYOctober 30, 2014
J.J. KANE AUCTIONEERS
www.jjkane.com�855-GO2-KANE
• Philadelphia, PASat., August 16, 2014For: Heavy Equipment
• Salt Lake City, UTThurs., August 21, 2014For: Heavy Equipment
• Rome, NYSat., August 23, 2014For: Heavy Equipment
• Atlanta, GAThurs., September 11, 2014For: Heavy Equipment
• St. Louis, MOThurs., September 18, 2014For: Heavy Equipment
• Gary, INSat., September 20, 2014For: Heavy Equipment
• Jackson, MSThurs., September 25, 2014For: Heavy Equipment
• Cincinnati, OHThurs., October 9, 2014
• Dallas, TXThurs., October 16, 2014
• South Beloit, ILSat., October 23, 2014
• Worcester, MAThurs., October 25, 2014
• Kansas City, MOThurs., November 6, 2014
• Philadelphia, PAThurs., November 8, 2014
• Charlotte, NCSat., November 13, 2014
• Portland, ORThurs., November 20, 2014
• Rome, NYSat., November 22, 2014
• Lansing, MIThurs., December 6, 2014
• Atlanta, GAThurs., December 11, 2014
• West Palm Beach, FLSat., December 13, 2014
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com�864-947-7888
• Pelzer, SCSat., August 9, 2014For: Equipment, Trucks, Trailer &Related Items
• Pelzer, SCSeptember 24 - 25, 2014For: 2 Day Fall Contractor’s Auction
• Easley, SCWed., October 15, 2014For: One Owner Absolute Auction
MIEDEMA AUCTIONEERING
& APPRAISAL
www.1800lastbid.com�616-560-0839
•ONLINE ONLYWed., August 13, 2014For: Construction Equipment
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com�860-642-4200
• Tiverton, RISat., August 16, 2014For: Complete Equipment &Inventory Dispersal Auction
• Agawam, MAFri., August 22, 2014For: Complete Equipment DispersalAuction
• West Townsend, MASat., September 13, 2014For: Public Auction Estate of Roy D.Shepherd
• North Franklin, CTSeptember 26 - 27, 2014For: 2 Day Major Public EquipmentAuction
• Bristol, CT
Wed., October 8, 2014For: Renowned Sand & GravelOperation
• Columbus, OH
Thurs., October 16, 2014For: Area Contractors & EquipmentDealers
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
•ONLINE ONLY
Thurs., August 14, 2014For: Construction Equipment
•ONLINE ONLY
Thurs., August 28, 2014For: Construction Equipment
QUANTOS AUCTIONS
www.quantosauctions.com
253-236-8555
• ONLINE ONLY
August 19 - 21, 2014For: Construction Equipment andmore
RITCHASON AUCTIONEERS INC.
www.ritchason.com
�800-806-3395
• Lebanon, TN
Sat., September 20, 2014For: Construction Equipment
RTI AUCTIONS
www.tietsworth.com
�585-243-1563
• Sprakers, NY
Wed., August 13, 2014For: Important Municipal EquipmentAuction
SALES AUCTION COMPANY, LLC
www.salesauctioncompany.com
�860-627-7506
• Windsor Locks, CT
Sat., October 4, 2014For: Construction Equipment
STEFFES GROUP INC.
www.steffesgroup.com
�701-237-9173
• ONLINE ONLY
August 6 - 13, 2014For: Construction Equipment & more
• Litchfield, MN
Thurs., August 14, 2014For: Construction/Farm Equipment
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
• Wilmington, DE
Fri., August 22, 2014For: Construction, Utility & ForestryEquipment
WAYNE PIKE
AUCTION COMPANY
www.waynepikeauction.com
763-389-5700
• Princeton, MN
Sat., September 13, 2014For: Heavy Equipment
• Princeton, MN
Sat., December 6, 2014For: Heavy Equipment
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 57
To view our Business Calendar online, go to www.constructionequipmentguide.com.
Ohio Nursery & Landscape Association – ONLA Summer CEUProgramsTuesday, August 26, 2014Irrigat ion Electrical Service Workshop (Irrigation: Diagnostics,Repair & Servicing)Location: Wolf Creek Company, Columbus, OHPrice: $40 ONLA Member; $60 Non-Member, Lunch Included;Credits AvailableTuesday, October 7, 2014Irrigat ion Electrical Service Workshop (10:00 AM to 2:00 PM)(Irrigation: Diagnostics, Repair & Servicing)Location: Wolf Creek Company, Sharonville, OHPrice: $40 ONLA Member; $60 Non-Member, Lunch Included;Credits AvailableWednesday, August 27, 2014Efficient & Product ive Tree Climbing Program (9:00 AM to 3:00PM)Location: Buckeye Equipment Sales NW, Cleveland, OHPrice: $200 ONLA Member; $250 Non-Member, Lunch Included;Credits AvailableAGC of Minnesota Carpenters Presents 3rd Annual NCSRCC Car Show on August 9,2014Time: 10 AM to 2 PM Place: 740 Olive Street, Saint Paul, MN 55130Special Appearance by the COPPS N RODDERS St. Paul Police K9 Foundation and St. Paul Police Mounted PatrolFoundation Admission is 2 Non-Perishable food items or a Cash Donation to theCarpenters Union food shelf. Food will be available for purchase.Trophies: Trophies for top 10 and Best in Show. First 50 cars willreceive a Dash Plaques. There will be a Drawing for Door Prizes. For more information, contact: John at 651/324-3648.
Historical Construction Equipment Association 2014 ConventionAugust 7th to 9th, 2014, in conjunction with the New York SteamEngine Association’s Pageant of Steam in Canandaigua, New York. Canandaigua is approximately 30 miles southeast of Rochester, 70miles west of Syracuse, and 90 miles east of Buffalo. Our last showin Canandaigua, in 2001, featured a wonderful assortment ofequipment, and we look forward to more of the same this time.Working to preserve the history of the construction equipment thatshaped our world…The Historical Construction Equipment Association is a non-profitorganization dedicated to preserving for public education the histo-ry of the construction, dredging and surface mining equipmentindustries.
Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in CHARLOTTE, NC on AUGUST 11-15, 2014.CICB will be in Charlotte, NC providing Mobile Crane and RiggingInspector Training (August 11-13) or Overhead Crane/Hoist andRigging Inspector Training (August 13-15). Program includes alltraining, manuals, a professional inspector’s kit, written examina-tions, hands-on evaluations, and certificates and wallet cards. Toregister, please call contact Camille at 800/327-1386. For moreinformation, please visit www.cicb.com.Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in SALT LAKE CITY, UT on AUGUST 18-22, 2014 or Rigger/Signal Person Train the Trainer Program on AUGUST 25-27.CICB will be in Salt Lake City, UT providing Mobile Crane andRigging Inspector Training (August 18-20) or Overhead Crane/Hoistand Rigging Inspector Training (August 20-22). Program includesall training, manuals, a professional inspector’s kit, written exami-nations, hands-on evaluations, and certificates and wallet cards.On August 25-27, a Train the Trainer Program for BasicRigger/Signal Person will also be held. To register, please call con-tact Camille at 800/327-1386. For more information, please visitwww.cicb.com.Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in HOUSTON, TX on AUGUST 18-22, 2014 or Basic Rigger/Signal Person Train the Trainer Program on AUGUST25-27.CICB’s Houston Training Center will be providing Mobile Crane andRigging Inspector Training (August 18-20) or Overhead Crane/Hoistand Rigging Inspector Training (August 20-22). Program includesall training, manuals, a professional inspector’s kit, written exami-nations, hands-on evaluations, and certificates and wallet cards.On August 25-27, a Train the Trainer Program for BasicRigger/Signal Person will also be held. To register, please call con-tact Camille at 800/327-1386. For more information, please visitwww.cicb.com.Crane Inspection & Certification Bureau (CICB) to provide Craneand Rigging Inspector Training in ORLANDO, FL on AUGUST 25-29, 2014. CICB’s Orlando Training Center will be providing Mobile Crane andRigging Inspector Training (August 25-27) or Overhead Crane/Hoistand Rigging Inspector Training (August 27-29). Program includesall training, manuals, a professional inspector’s kit, written exami-nations, hands-on evaluations, and certificates and wallet cards.To register, please call contact Camille at 800/327-1386. For moreinformation, please visit www.cicb.com.
HCEA International Convention and Old Equipment ExpositionThe HCEA holds one annual convention and old equipment exposi-
tion each year. Somewhere in either the lower 48 or Canada, webring members, local fans, exhibitors, merchandise retailers and, ofcourse, a lot of working machines together for learn and share a bitof history. For more information on this event, please contact the Associationat 419/352-5616 or go to [email protected].
Ohio Nursery & Landscape Association presents …NGLCO FIELD DAY,August 12, 2014, Perry, OHThe NGLCO Summer Field Day is a long-standing tradition forgreen industry professionals. Mark your calendar and attend the2014 event! The Nursery Growers of Lake County Ohio, Inc. was formed in 1927for ‘the improvement and trade education’ within the world-famousregion of Northeastern Ohio center of Lake County, Ohio. OurAssociation continues to help nursery and supplier membersaddress current issues and speak with one voice, here in the “Heartof the Nursery Industry.” Contact the NGLCO with any questions youmay have at 440/241-7969 or go to [email protected] for more infor-mation.
SAVE THE DATE!American Public Works Association2014 International Public Works Congress and ExpositionAUGUST 17 – 20, 2014Metro Toronto Convention CentreToronto, Ontario APWA’s International Public Works Congress & Exposition attractsmore than 5,000 attendees each year and excitement continues togrow as we gear up for Toronto in 2014. This is one event you can’tafford to miss! Prime locations are filling up fast so don’t wait, callme directly at 703/706-8230 or email at [email protected] toreserve your booth today. For more general information on the aboveshow, please contact APWA Show Management at 800/687-7469or 703/706-8230; email: [email protected]. Website:www.apwa.net.
COAL-GENAugust 20 to 22, 2014, Music City Center, Hall B, Nashville,Tennessee With over a decade of service to the coal sector, COAL-GEN is theindustry’s most dynamic event covering the latest topics affecting thedesign, development, upgrading, operation and maintenance ofcoal-fueled power plants. With an anticipated attendance of nearly2,000 industry professionals, COAL-GEN is the industry’s largestevent focused on the solutions of today and the technologies oftomorrow. The Benefits of Attending COAL-GEN 2014 include: Gaina better understanding of current and future issues affecting the coalindustry. Be a part of the discussions affecting the design, devel-opment, upgrading, operation and maintenance of coal-fired powerplants. Learn about technical developments and how they impactyour work; and network with thousands of industry professionals.Earn Professional Development Hours in our Pre-ConferenceWorkshops. For COAL-GEN event information, contact JenniferLindsey at 918/832-9313 or email: [email protected].
Associated General Contractors of Minnesota (AGC of Minnesota)SPORTING CLAYS FUNDRAISERWhen: AUGUST 25, 2014 – Monday, 12:30 PM until 6:30 PMWhere: Minnesota Horse & Hunt Club, 3300 220th Street, E., PriorLake, MNContact: For more details on this event, contact Denise Woods atAGCPhone: 651/796-2186 or [email protected]
General Contractors – Join AGC of Minnesota at the MSES FallOutingSeptember 10-12, 2014For the first time, AGC will host a contractors’ cabin as part of Tasteof MSES, just one of the activities available at the MSES Fall Outingat The Pines at Grandview Lodge, 23521 Nokomis Avenue, Nisswa,MN. The MSES Fall Outing Wednesday Tournament is on September10th; Complimentary Lunch at 11:30 AM; Shotgun at 1:30 PM;Prizes to be awarded on Thursday during the Social Hour. Join usfor an opportunity to visit with surveyor and engineer representativesalong with attendees from MnDOT. For more information on this event, please contact Derek Schmidt [email protected] or call (612) 518-1643.
The Ohio State University Farm Science Review EventSeptember 16 thru September 18, 2014The 52nd annual Ohio State University Farm Science Review will beheld Sept. 16-18 at the Molly Caren Agricultural Center, and prepa-rations are well underway for the annual farming showcase, whichattracts more than 130,000 farmers, growers, producers and agri-cultural enthusiasts from across the U.S. and Canada annually.Participants are able to peruse 4,000 product lines from more than600 commercial exhibitors and engage in educational opportunitieswith Ohio State and Purdue University specialists, Ohio StateExtension, and the Ohio Agricultural Research and DevelopmentCenter. More than 600 commercial exhibitors set up shop at theReview each year, displaying the latest and greatest in farming tech-nology, products, machinery and equipment. For exhibitors, it’s achance to reconnect with established customers and connect withnew ones. “If you come to the 2014 Farm Science Review, you will‘Experience the Difference.’” The Media coordinators for the FarmScience Review are:Janice Welsheimer, Wilt Public Relations937/688-3878; [email protected]; www.wiltpr.comTracy Turner, CFAES Communications and Technology614/688-1067; [email protected]; http://cfaes.osu.edu
BusinessCalendar
Page 58 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
More than 3,600 bidders participated online and in personat Ritchie Bros. Auctioneers’s $49 million unreservedpublic equipment auction in Fort Worth, Texas, July 23
to 24.Bidders came from 57 countries, including 48 U.S. states.Bidders from outside Texas purchased more than $27 million ofequipment, from as far away as Australia, Germany and theUnited Arab Emirates. Online bidders purchased $19 million ofthe equipment sold.In total, close to 3,300
equipment items weresold in the auction,including a 2012Caterpillar D6T XWcrawler tractor that soldfor $295,000; three 2012Kenworth T800 sleepertruck tractors that sold for$102,000 each; and three2012 Kenworth T800sleeper truck tractors thatsold for $100,000 each.
(This story also can befound on ConstructionEquipment Guide’s Website at www.construc-tionequipmentguide.com.)
More Than 3,600 Participate in Ritchie Bros. Auction
Jeff Helmericks, Spectrum LNG LLC, Palmer, Alaska,has just purchased this John Deere 1050C for one ofthe company’s up-coming construction projects.
Don Larson (L), Star Tractor Ltd., Fort Worth,Texas, and Terry Jackson, Chanas AggregatesLano, Texas, watch the equipment cross the ramp.
Juan Trevino (L) and Miguel Angel Almaguer ofTrans National Equipment and Supply, Pharr,Texas, think this Cat 320 CL needs to be in theirfleet.
Lori and Mickey Smith, independents in Dallas, Texas, are quiteinterested in this Cat D6T XL.
Greg Braswell, Trak Traders, hasgot some interest in this Hydro-Ax 2864.
The Yellowhouse Oklahoma Used Equipment Manager JeffReel (L) and Texas Manager Mitch Hoven take a close lookat this John Deere 350D LC.
Jack Hisle, Hisle Brothers. Inc. in Ada,Okla., waits for a shuttle to take him to theequipment.
Rob Purnell (L) and his son, Hunter, R.E.P., came allthe way from Shelbyville, Ky., to get a closer look atthis JLG G10-55A.
The Virtual Ramp was very popular in the heat.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 59
Page 60 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contractors Work With Locals to Maintain Historic Charmcooperative,” said Ray Cranston,assistant project manager ofODOT. “We involved the differentbusinesses during the project devel-opment phase, so they knew theproject goals and had the chance tooffer input. The contractor notifiedlocal businesses of the constructionand discussed how that will impactthem. We have scheduled a meetingwith the contractor and the smallbusiness owners to share inputabout the project schedule and hearconcerns from the businesses. Andwe’ll have traffic control to allowcustomers to access the businessesduring construction.”The project involves about a 1
mi. (1.6 km) stretch of highway,bounded on both sides by about 20businesses. When finished, thehighway — a designated scenicbyway — will feature two 12-ft.(3.6 m) lanes, a 14-ft. (4.6 m) medi-an, 6 ft. (1.8 m) shoulders and 6 ft.sidewalks on each side. The two-year project is scheduled to be com-pleted in spring of 2016.“I think it’s really going to
improve the appearance of that partof town,” Cranston said. “We’retrying to make it look as attractiveas we can when it is finished.” Excavators will first move about
14,000 cu. yd. (10,704 cu m) of dirt.They’ll do that with some fairlynew technology that allows theequipment operators with K&EExcavation to monitor theirprogress by computer.“We made a digital model of the
project and they can load that infor-mation into a program and have itdisplayed in the equipment so oper-ators know what elevation theyneed to dig to just by looking at acomputer screen in the equipment,”said Brady Pauls, ODOT construc-tion coordinator. “These guys havebeen using the technology for a fewyears and are probably the leadersin the state with it. Even though it’spretty large upfront cost for them toinstall all the equipment, they see itas being a real advantage in theirproduction.”Crews also will build two
mechanically stabilized earth wallson the east side of the highway, aswell as seven other retaining walls,all designed to protect the wetlandsand Baldy Creek, stabilize banksand provide room for the expandedhighway.
“Even with the retaining walls there were questionsabout long term stability,” Cranston said. “So ODOTpurchased two of the houses. There were minor settle-ment concerns. We weren’t comfortable having hous-es already on steep ground above a wall like that.”They’ll also replace two existing concrete box cul-
verts with large arch pipe crossings, and build a waterretention facility so that the expanded roadway doesn’tchannel more storm water into the creek and cause it toflood. “The retention facilities are large pipes that store
water during flood events,” Cranston said. “They allowthe water to flow out at a controlled rate rather thancontributing to a flood event.”Finally, crews will realign east 32nd Street to track
with west 32nd Street and add a traffic signal both forpedestrians and vehicles. When pedestrians enter theroadway flashing lights will signal traffic of their pres-ence. The new sidewalks and all curbs will be ADA acces-
sible, and there will be a new parking lot at the histori-cal Nelscott Shopping center, as well as a significantamount of new landscaping, including trees andshrubs. The sidewalk will be separated from the high-way by a 6 ft. strip of landscaping. “From a transportation perspective, this project will
help manage the heavy U.S. 101 traffic of this area in asafer and more efficient way,” said ODOT spokesmanRichard Little. “At the same time, we’re increasing theopportunity for residents and tourists to visit the his-toric area, and its businesses, on foot and by bicycle ina safer manner with new sidewalks and a new pedes-trian crosswalk. This project is a benefit to all modes oftravel and to the residents and businesses in the com-munity.”
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
HIGHWAY from page 1
“We made adigital model ofthe project andthey can loadthat informa-tion into a pro-gram and haveit displayed inthe equipmentso operatorsknow what ele-vation theyneed to dig tojust by lookingat a computerscreen in theequipment,”said BradyPauls, ODOTconstructioncoordinator.
The two-year project is scheduled tobe completed in spring of 2016.
The new sidewalks and all curbs will be ADA accessible, and therewill be a new parking lot at the historical Nelscott Shopping cen-ter, as well as a significant amount of new landscaping, includingtrees and shrubs.
From a transportation perspective, this projectwill help manage the heavy U.S. 101 traffic of thisarea in a safer and more efficient way.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 61
BUY ONLINE
The new way to buyused equipment
2008 Bobcat 329G — $16,400
2012 Volvo MCT125C — $25,500
2008 Genie Z-45/25 4WD Dual Fuel — $29,500
2008 SkyTrak 6042 Telehandler*
Starting bid: $35,000
2012 Volvo MCT125C — $25,500
Visit allEquip.com
2007 JLG 3246ES — $7,500
Excavators | Landscape Equipment | Generators | Trenching Equipment | Sweepers/Scrubbers | and much more!
Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.
2008 Bobcat 329G — $16,400
2008 Bobcat 329G — $16,400
2008 Bobcat 329G — $16,400
olvo MCT125C — $25,5002012 V Volvo MCT125C — $25,500
olvo MCT125C — $25,500
2008 Genie Z-45/25 4WD Dual Fuel — $29,500
2008 Genie Z-45/25 4WD Dual Fuel — $29,500
2008 Genie Z-45/25 4WD Dual Fuel — $29,500 2012 V
olvo MCT125C — $25,500 V Volvo MCT125C — $25,500
olvo MCT125C — $25,500 2007 JLG 3246ES — $7,500
2007 JLG 3246ES — $7,500
ed arEquipment featur
Excavators | Landscape Equipment | Generators | T
esentation of items available on allEquip. Items arepre a red ar
Excavators | Landscape Equipment | Generators | T
e sold and added to inventory dailyesentation of items available on allEquip. Items ar
enching Equipment | Sweepers/Scrubbers | and much morrExcavators | Landscape Equipment | Generators | T
e sold and added to inventory daily
enching Equipment | Sweepers/Scrubbers | and much mor
.
isit V allEquip.com
e sold and added to inventory daily
enching Equipment | Sweepers/Scrubbers | and much mor
allEquip.com
e!enching Equipment | Sweepers/Scrubbers | and much mor
Page 62 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Holds Late Model Rental Fleet Auction
Glen Love of Live Oak Auctions in Goldthwaite, Texas,has been checking out this Gehl R58.
Dale Spivey of Riata Trading in Comanche, Texas, isreally interested in the 323D John Deere skid steers.
Harold Panky, Panky Ranch and Dozer Service, is a lit-tle curious about this Lull 1044C high lift.
Joe and Donna Riley of Crooked River Sod in Dublin,Texas, are in need of this Ingersoll Rand portable gen-erator.
Eddie Strain, Strain Ranch in Colorado City, Texas, isthinking of bidding on this National Crane.
Steve Clark of C.P. Integrated Services in OklahomaCity, Okla., plans on sending this Ingersoll Rand gener-ator to the “Sooner” state.
Oscar Gomez (L) and Jose Breindembach of CadeciEquipment in West Palm Beach, Fla., get ready to bid onthis John Deere 710J.
Alex Lyon & Son held a late model constructionrental fleet auction on July 22 in Dallas (FortWorth), Texas.
The auction featured late model rental fleet equipmentfrom several national rental fleets, including UnitedRentals and Hertz Equipment Rentals. The sale included
construction equipment, support attachments, aerials, trail-ers and trucks.For more information, visit
http://www.lyonauction.com/.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Jack stays in the shade of the“Jack-in-the-Box” for the small
item auction.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 63
SEATTLE (AP) An effort to repair the giant tunnelingmachine stuck under downtown Seattle is going more slow-ly than expected.
The state Transportation Department said July 28 it hadbeen informed by the contractor, Seattle Tunnel Partners, thatit’s taking longer than expected to construct an undergroundshaft that will allow crews to reach the machine’s damagedcutter head.
The DOT said it’s “no easy task” to build a concrete ringthat’s 80 ft. (24 m) wide and 120 ft. (36.5 m) deep. Work onthe shaft was expected to be done in July, but could take untilthe end of August. After the pit is finished, crews will use amassive crane to lift the head of the machine to the surface torepair seals and bearings.
The contractor still expects to resume digging next Marchand hopes to have the tunnel open in November 2016.
(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
No Easy Task...
Effort to RepairSeattle TunnelMachine Delayed
Page 64 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2012 KOMATSU PC2000-8TUSCALOOSA, AL – AUGUST 20
2011 & 2008 DRILTECH D50KSTUSCALOOSA, AL – AUGUST 20
4 – 2011 KOMATSU HD785-7 TUSCALOOSA, AL – AUGUST 20
2012 & 2 OF 5 – 2011 CATERPILLAR D11T TUSCALOOSA, AL – AUGUST 20
Reno, NVAugust 22 (Friday) | 9 am20202 Interstate 80, Sparks, NV 89434Phone 530.669.4166
Equipment from:Coan Equipment of Nevada Inc. and other owners.
Featuring:Motor graders, wheel loaders and much more...
Tuscaloosa, ALAugust 20 (Wednesday) | 9 am14695 Lock 17 Rd, Brookwood, AL 35444Phone 770.304.3355
Surplus equipment dispersal from: Southland Resources, Inc. and equipment from other owners.
Featuring: Crawler tractors, rock trucks and much more....
Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online
Sell your equipmentCall today–any number of items accepted.
More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.
2010 CATERPILLAR 993K HIGH LIFT RENO, NV – AUGUST 22
2 – CATERPILLAR D9R RENO, NV – AUGUST 22
2008 CATERPILLAR 140M VHP RENO, NV – AUGUST 22
3 – 2012 CATERPILLAR 785D RENO, NV – AUGUST 22
Auctioneer Gregory S. Fuqua # 1820 / Auctioneer Gary S. Seybold # 1821 *OAC. Terms and conditions apply.
rbauction.com
Up to 100% financing available! Rates as low as 5.99%
Unreserved public auctions | Bid in person or online | No minimum bids or reserves
Mining & heavy equipmentTuscaloosa, AL – Aug 20 | Reno, NV – Aug 22
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 65
Up to 100% financing available! Rates as low as 5.99%
rbauction.com | 1.800.211.3983
Featured upcoming auctionsLos Angeles, CA August 12Williston, ND August 13Sacramento, CA August 14Albuquerque, NM August 20 Reno, NV August 22 Houston, TX August 27–28 Las Vegas, NV September 5 Phoenix, AZ Septermber 12 Salt Lake City, UT September 16
Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online
Sell your equipmentCall today–any number of items accepted.
More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.
Featured items in North America430+ excavators200+ crawler tractors285+ wheel loaders75+ motor graders200+ loader backhoes180+ skid steer loaders50+ rock trucks 85+ cranes 240+ dump trucks and much more...
Auctioneer Trevor J. Moravec Bond # 0466225 , Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auction Company Bond #0470724, Auctioneer Eddie R. Graham Bond # 0470726, Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auction Company Bond #0470724, Auctioneer John Korrey Bond # 0470729, Auctioneer Patrick J. Hicks Bond # 0470727, Auctioneer John Korrey # 15943, Used Motor Vehicle Dealer License #2647
Unreserved public auctions23,1 items
o 100% finUp t
balaivvaiing a avanco 100% fin
w as los aeatle! Rb
sw a 5.99%
TERPIL CA ATERPILLAR–2
o 100% finUp t
22TUGUS A– NV, RENO–R9 DTERPILLAR
balaivvaiing a avanco 100% fin
CRAMENTAS –75 3TPETERBILT – 8OF 5
w as los aeatle! Rb
4 1TUGUSA –CA,OCRAMENT
sw a 5.99%
TO 90 E 900MSTEVORG2006
7–28 2STT 2UGAU – XX – TTX, NSTOUOH – NTO
D558 7 7TERPILLAR2
CAATERPILLAR210 2 –3 2TUGUSA –NVV –,RENO
1CRAMENT
1011HCAMERICAN/ TEREX9002AS
CTING4
ERE-ELF SON T01 1TUGUSA –CA,OCRAMENT
oming pcued rred uateFCAs, eleAngsoL
sauctionoming 12t sAugu
WD J AGP277 DEERE JOHN10
102 2TUGUSA –NM,ALBUQUERQUE
Norin semited rred uateFFe430+ rstoaavcex
H–3X052TLLTEB-KNIL1102–3
Bid ▸
aicAmerth Nor
7 – 28 2STT 2UGAU – XX – TTX, NSTOUOH
eonfidenccith wBid price vserveror sidbm minimuNo
ALBUQUERQUE
sepric
E77 D0
TERPILLAR CA ATERPILLAR1102 2TUGUSA –NM,ALBUQUERQUE
NDon, tsliliWWiCA, oamentrSacNMque, uquerbllA
NV, enoRTXon, tsHou
NVs, aeggaVVegsLaAZx, Phoeni
UT, ityy, e CkLatlSa
3 1tt 1sAugu4 1t sAugu
20tt 20sAugu22tsAugu
27–28tt 27–28sAugu5ber emSept
12ber ermSept61ber emSept
200+ soractrtwler arc285+ saderlowheel75+ sadergror mot200+ shoekacbader lo180+ saderloeer tsid ks50+ sckurtckro85+ sencra240+ mucand skructmp du
▸ ▸
SelC
MorVisiand e...morh muc
ablaivaing ancfin100% o tUp onor son perin id band pectIns
equipmentr ouyyoulSelemsitofber mnuyan–yaodtlal
lyaidadded semite More t Visi omauction.crb auctionslalsee o t
s.tingslie ato-dp-tuand
lelineon
ed.eptcacems
auctions
om auction.crb
ion Firm License # 444.000193, ctAu Bond # 0466225 , vecaor J. MorevrTerionectAu License #225, erklCion ctAu. a) Inc (AmericserionectAu. sorhie BitcR
ale DelehicVorotsed Mey # 15943, Uorr John KerionectAu
om | 11.39831.800.2
h # 441.000865, g M. HighsmiteGrerionectAuion Firm License # 444.000193, y Bond #0470724, ompanCion ctAuh # 701, ory M. HighsmitgeGrerionectAu License #225,
License #2647eral
11.3983
am Bond # 0470726,ahGrdie R. EderionectAuy Bond #0470724, ompanCion ctAuh # 441.000865, atric PerionectAuey Bond # 0470729, orr John KerionectAuy Bond #0470724,
am Bond # 0470726, Bond # 0470727,sk J. Hickatric
Page 66 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 67
Page 68 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
C% � � � �
�� �
�� � ������'-:;-95������ �
������������ ���������������������� �� ������������ ���������������������� ��
�::-;:�56�365/-9�5-+-::)9@15�;0-�+65;15<15/�67-9);165:�6.
����#���-::5-9�"6),���1::6<91��1;@��$(�������%#�
���#�����������#������"�� ���������� ��������������#��������������� ���������������� ����������� !������!���!%�����!�����!���!%���!�������$������� �����!����������
��� ���)915-�&-::-3:�!9-=16<:3@��65.1/<9-,�.69�#-1:41+�$-:;15/��� ����"-31)5+-�)5,���-�)9--���B��6,<3)9�!65;665��6);:��� ������)5,�!91+-��1/0�!9-::<9-��)915-��19��6479-::69:�������)*;-2�!9-5;1+-��33�$-99)15�#21,,-9�&-01+3-:�>1;0��9133:�����������������)9662)��#$� ��%��$9)+2��9133:�������<*6;)�"$&�����'���1-:-3��$&B:����������
���"������"#�����$���!#� $�����#���#-9+-3��0)55-3:��!69;)*3-��5-9;1)3��)=1/);165�#@:;-4:����!��#�
���@,9)<31+��)*3-�)5,�%4*131+)3��69,�'15+0-:���)915-�%4*131+)3��)*3-���<,�!<47:���)915-�&-::-3�)5,��5/15-�!)9;:���<-3�$)52:��
�?736:1=-�#;69)/-��6?-:���)9,>)9-�)5,��<+0��69-
���������������������� ����
gains remain modest and sporadic in manylocalities.”Dallas-Plano-Irving, Texas, added the
largest number of construction jobs in thepast year (11,700 jobs, 10 percent), followedby Los Angeles-Long Beach-Glendale,Calif. (10,000 jobs, 9 percent), Chicago-Joliet-Naperville, Ill. (8,200 jobs, 7 percent)and Baton Rouge, La. (5,900 jobs, 13 per-cent). The largest percentage gains occurredin Monroe, Mich. (29 percent, 600 jobs),Lake Charles, La. (25 percent, 2,700 jobs),Pascagoula, Miss. (25 percent, 1,500 jobs)and El Centro, Calif. (23 percent, 500 jobs).The largest job losses from June 2013 to
June 2014 were in Bethesda-Rockville-Frederick, Md. (minus 4,200 jobs, minus13 percent), followed by Phoenix-Mesa-Glendale, Ariz. (minus 2,900 jobs, minus 3percent), Gary, Ind. (minus 2,300 jobs,minus 12 percent) and Putnam-Rockland-Westchester, N.Y. (minus 1,800 jobs, minus6 percent). The largest percentage decline forthe past year was in Cheyenne, Wyo. (minus18 percent, minus 700 jobs), followed by
Bethesda-Rockville-Frederick, Vineland-Millville-Bridgeton, N.J. (minus 13 percent,minus 300 jobs), Gary, and Steubenville-Weirton, Ohio-W.V. (minus 12 percent,minus 200 jobs).El Centro experienced the largest percent-
age increase (23 percent, 500 jobs higherthan June 2013) among the 26 metro areasthat topped their prior June constructionemployment highs. Baton Rouge added the
most jobs since reaching its prior June peakin 2013 (5,900 jobs, 13 percent). Phoenix-Mesa-Glendale (minus 93,700 jobs, minus50 percent) experienced the largest drop intotal construction employment compared toits prior June peak (reached in 2006) whileLake Havasu City-Kingman, Ariz. experi-enced the largest percentage decline com-pared to its June 2006 peak (minus 68 per-cent, minus 5,400 jobs).
Association officials noted that signs ofuncertainty about a range of federal infra-structure and construction programs couldundermine future construction employmentgrowth. They urged Congress to quicklypass a “continuing resolution” that would setfederal spending levels for next year and toenact long-term surface transportation legis-lation. Having these measures in placewould make it easier for many constructionfirms to make hiring, purchasing and expan-sion plans, they added. “Even as the overall economy continues
to recover, many firms that work on federal-ly-funded projects are having a hard timemaking hiring, equipment purchasing andexpansion plans,” said Stephen E. Sandherr,the association’s chief executive officer. “Itis hard to make sound business decisionswhen you don’t know how much work willbe available in the near future.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
EMPLOYMENT from page 1
“Even as the overall economy continues to recover,many firms that work on federally-funded projects arehaving a hard time making hiring, equipmentpurchasing and expansion plans. It is hard to makesound business decisions when you don’t know howmuch work will be available in the near future.”
Stephen E. SandherrAssociated General Contractors of America
Association Officials Note Uncertainty of Employment
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 69
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON & SON
MON., AUGUST 25 @ 1:00 PM
NOTE: Selling in this sale be late and great Cat Crawlers & Volvo ArticulatedTrucks along with rental fleet equipment from United Rentals & Hertz EquipmentRentals.
HILITES INCLUDE: 15 CRAWLER TRACTORS: 2014 Cat D6T (cab/ air),(2) 2009 –(2) 2008 Cat D8T (manual angle blade & winch), Cat D7R-II, (2) 2012Cat D6TXW (winch), 2008 Cat D6TXWVP (winch), 2012-2008 Cat D6TXL,2007 Cat D6TLGP, Cat D6RXW, Cat D6RLGP (Ripper), Cat D6D (winch), Cat D6RW, Cat 920, 3 ARTIC-ULATED HAUL TRUCKS: (2) 2007 Volvo A40D (6x6), 2005 Volvo A40D (6x6), 5 HYDRAULICEXCAVATORS: JD 270LC, 2012 JD 210GLC, 2005 Komatsu PC200LC-7, 2005 Linkbelt 130LX, Case325B, LONG REACH EXCAVATOR: 2005 Case CX240, HYDRAULIC HAMMER: Rockram V805, 3MOTOR GRADERS: 2012 JD 770G, Cat 12G, Cat 140M, 3 RUBBER TIRED LOADERS: 2008-2006Volvo L110E, Case 621D, VIBRATORY ROLLER: IR SD100D, 2 SKID STEERS: Unused Case SV185,Bobcat S175, 3 TELESCOPIC FORKLIFTS: 2010 JLG G9-43A, 2005 Gehl DL10-55 (4x4), 2006 Lull944E-42 (4x4), ROUGH TERRIN FORKLIFT: 2006 IR RT706J, 3 BOOM LIFTS: 2004 Genie S60 (4x4),JLG 600S (4x4), JLG 450AJ, 20 SCISSOR LIFTS: 2005 JLG 2030ES, (2) 2006 JLG 1930ES, 2007 SkyjackSJ8831RT, Skyjack 4832, (5) Skyjack 3226, (5) Skyjack 3219, (3) 2007-(2) 2006 Upright TM12, 16 AIRCOMPRESSORS: 2009 Sullair 1150XH, 2006 IR 750CFM, (2) 2007 IR XP375WIR, (3) 2007 IRXP375WCU, (6) 2007-(2) 2006 IR P185WJD, 2008 Quincy QSB50 Rotary Screw, 6 GENERATORS: 2005Kohler 60RE0ZJB, 2005 Generac 2000 Series 98A03685-S, (2) 2008 MQ DCA70USI, 2007 MQ DCA-45USI, 2008 MQ DCA25USI, WELDER: 2007 Miller Big Blue 502D, 31 LIGHT PLANTS: (19) 2008-(7)2007 Amida AL4060D4MH, 2008 Magnum Pro MLT4060, 2006 Magnum MLT3060, 2006-2005 GenieTML-4000N, 2008 Amida/Terex AL4060D4MH, DUMP TRUCK: 2007 Sterling Acterra (s/a), SERVICETRUCK: 2008 Ford F250, 3 PICKUP TRUCKS: 2006 Ford F150 (4x4), 2005 Ford F250 (4x4), 2006 Chevy1500 3 DETACHABLE GOOENECK TRAILERS: (3) 2014 Witzco RG50 (tri), 2 PRESSURE WASH-ERS: (2) New Easy Kleen Magnum Golf, NEW SUPPORT EQUIPMENT: New Mustang LF88 PlateCompactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 4Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDS Hammer Drill,New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in.Drive Aim Impact Wrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, NewAuto Darkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft.Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose, ATTACHMENTS: Skid Steers: Unused Lowe1650CH Hydraulic Auger, (3) Unused Lowe 750CH Hydraulic Auger.
DIRECTIONS: From Bush International Airport: Airport exit on JFK Blvd., take left ramp onto WillClayton Parkway toward Central Cargo .2 miles. Continue on Jetero Blvd., continue on McKaughan Rd.,left on Viscount Rd., left Mecom Rd. Take ramp onto JFK Blvd. toward Airport exit (I-45)/ Beltway 8/Hardy Toll Rd. 2 miles. Take ramp onto Hardy Toll W toward Hardy Toll Rd. (tolls) for 2.9 miles. TakeHardy Toll Rd. North/ Woodlands exit onto Hardy Toll N (tolls) – 11.9 miles. Merge onto I-45 N for 8.4miles. Exit #81/ Magnolia (FM-1488) toward Magnolia (I-45 S)/ Hempstead .3 miles. Take ramp onto I-45S .2 miles, take ramp onto FM 1488 Rd. (FM-1488) toward I-45 N/ Sherbrook Dr. .3 miles. Take ramp ontoNorth Fwy toward I-45 N .2 miles. Take ramp onto FM 1488 Rd. (FM-1488) toward Magnolia (I-45S)
Hempstead for 8 miles. Site is on left.Address: 8215 FM 1488, Magnolia, TX 77354.
TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H LyonSALE SITE PHONE: (863) 660-3613
TUE., AUGUST 26 @ 12:00 PM
NOTE: Hertz Equipment Rentals is having their annual traditional rental fleet auction at theirfacility and the equipment being sold is rental-ready.
HILITES INCLUDE: 2 HYDRAULIC EXCAVATORS: 2007 Takeuchi TB175, 2007Takeuchi TB135, RUBBER TIRED LOADER: 2010 Komatsu WA250-6, 2 TRACTORLOADER BACKHOES: 2007 Case 580M (4x4), 2007 JD 310J (4x4), 2 MINI TRACKLOADERS: (2) 2007 Toro Dingo TX525, TRENCHER: 2008 Ditch Witch R150E, 12 TELE-SCOPIC FORKLIFTS: 2007-(2) 2006 JLG- G9-43A (4x4), (3) 2007 JLG G6-42A (4x4), 2008-2007-2006 Lull 944E-42 (4x4), 2007 Genie GTH844 (4x4), 2007-2006 Skytrak 6042 (4x4), 9ROUGH TERRAIN FORKLIFTS: (5) 2007-2006 Case 586G, 2006 Harlo HP8500, 2004-2004 Harlo HP6500, 2 FORKLIFTS: 2007 Toyota 8FDU25, 2006 Toyota 7FGU30, 5 BOOMLIFTS: 2006 JLG 800S (4x4), 2007 JLG 450A (4x4), 2007 JLG 400S (4x4), (2) GenieZ60/34(4x4), 8 SCISSOR LIFTS: (2) 2007-2006 JLG 3246ES, 2007 JLG 2630ES, (2) 20072030ES, 2006 Genie GS3246, 2006 Genie AWP25S, 20 AIR COMPRESSORS: 2009- (2) 2007IR HP750WCU, (5) 2007-2006 IR XP375WIR, (9) 2007-(2) 2006 IR P185WJD, 9 GENERA-TORS: 2008-2007 Multiquip DCA-150USJ, (3) 2007 Multiquip DCA125USJ, 2007 MultiDCA-85USJ, 2007-2006 Multi DCA45USI, 2010 Wacker G25, 13 WELDERS: (2) 2007Lincoln Vantage 400, 2007 Lincoln SAE400, 2007 Classic 300D, 2007 Miller Mark VII, (3) 2007Miller CST-280, (4) 2007 Miller Big Blue 400D, 43 LIGHT PLANTS: (3) 2009-2008-(8) 2007-2006 IR LS6kw, (12) 2009- (4) 2007 Magnum MLT3060, (2) 2008- (2) 2006 Genie TML-4000N,(4) 2007 Multiquip LT-12, (3) Terex RL4000, 2009-2008 Wacker LT4, 2007 Allmand NL7.5,2009, 5 WATER PUMPS: 2006 Pioneer PPTP63C1 6in., 2007 Pioneer PP63C17L, 2005Pioneer PP63, 2007-2006 Pioneer PP53C14L, BOOM TRUCK: 2008 Int’l. 4200 (18t, s/a),WATER TRUCK: 2007 Int’l. 4200 (s/a), STAKE TRUCK: 2008 Ford F550 (4x4), 7 PICK-UPS: (2) 2008-2005 Ford F350 (4x4), 2008-(3) 2007 Ford F150 (4x4), GOOSENECK TRAIL-ERS: 2004 Ledwell 10 ton (t/a), 2 UTILITY TRAILERS: 2005 best TB80X16 16ft. (s/a), 2009JC 20ft. (t/a), 15 UTILITY VEHICLES: 2009 Bobcat 2200 (4x4), (5) 2009 Bobcat 2220 (4x4),(9) 2009 Kubota RTV900 (4x4), SUPPORT EQUIPMENT: (4) New Mustang LF88 PlateCompactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, New MustangMP3 3in. Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New MustangCV3500 Concrete Vibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in.Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x4ft. Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air ImpactWrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses,(4) New Stiff Neck Pintle Hitches.
DIRECTIONS: From IAH International Airport: JFK Blvd. 3.1 miles, merge onto SamHouston Tollway E/ Texas 8 Beltway E via ramp on the left 24.1 miles, exit toward TX-225/Deer Park/Houston .3 miles. Merge onto East Sam Houston Pkwy S/ Texas 8 Beltway S, leftonto Pasadena Freeway Frontage Rd. .2 miles. Take ramp on left onto TX-225 E 3.1 miles.Take exit toward Battleground Rd. .2 miles, merge onto Pasadena Freeway Frontage Rd. .2
miles. Right onto S Battleground Rd. .3 miles, 1st right onto Thirteenth St., 1st right onto ClayCt. .2 miles. Site on right. LOCATION: At the Hertz Facility in Deer Park.
Address: 1002 Clay Court, Deer Park, TX 77536.
TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H LyonSALE SITE PHONE: (262) 903-6269, (863) 660-3613
VERY LATE MODEL CAT, VOLVO, KOMATSU RENTAL
FLEET CONSTRUCTION & OILFIELD EQUIPMENT, AERI-
ALS, FORKLIFTS, SUPPORT, TRUCKS & TRAILERS.United Rentals
Hertz Equipment Rentals
ANNUAL LATE MODEL RENTAL FLEET CONSTRUCTION
EQUIPMENT, AERIALS, FORKLIFTS, SUPPORT, TRUCKS &
TRAILERS.
AUCTION AUCTIONHOUSTON,
(DEER PARK), TEXAS HOUSTON,(MAGNOLIA), TEXAS
Hertz Equipment
Rentals ONSITE
Page 70 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ALEX LYON
DEER PARK TX / HOUSTON TX ..................................69
ALLIED CONSTRUCTION PRODUCTS ..............................47
AMULET..................................................................................48
ATLAS COPCO ......................................................................13
BAR NONE AUCTION
SACRAMENTO CA ........................................................57
BARGAINS..............................................................................54
BID SPOTTER........................................................................63
BLANCHARD MACHINERY ..................................................13
BLUELINE CONST EQUIP & SERVICES ............................11
BOBCAT COMPANY ..............................................................50
BOMAG ..................................................................................35
CASE CONSTRUCTION ..................................................22,40
CEG SCALE MODELS ..........................................................12
CHICAGO PNEUMATIC ..........................................................9
CLASSIFIED ..........................................................................48
CONSTRUCTION EQUIPMENT GUIDE
REACH YOUR MARKET ..............................................26
UNDERGROUND UTILITY PROMO ............................38
SHOPPING FOR USED EQUIPMENT..........................66
WANTED ........................................................................55
AUCTION RESULTS ......................................................59
DITCH WITCH WEST ............................................................36
DRESSTA NORTH AMERICA................................................21
ECCO EQUIPMENT ..............................................................10
EFFICIENCY SHORING AND SUPPLY ................................11
EQUIFY AUCTIONS LLC ......................................................67
ESCO CORP ..........................................................................54
FLANGE LOCK ......................................................................24
HENDRIX MACHINERY LLC ..................................................3
HILCO INDUSTRIAL LLC ......................................................68
HITACHI CONSTRUCTION MACHINERY ............................25
HYUNDAI ................................................................................17
HYUNDAI CONSTRUCTION EQUIPMENT ............................6
IRON PLANET........................................................................61
JACKSONVILLE CRANE ......................................................14
JCB INC ..............................................................................7,41
JFW EQUIPMENT INC ..........................................................32
JOHN DEERE ........................................................................52
JOHN DEERE SKID STEER..................................................49
KIRBY-SMITH MACHINERY INC ..........................................43
KOBELCO CONST MACH AMER LLC..................................72
KOMATSU AMERICA CORP ............................................14,18
LEEBOY..................................................................................28
NPK CONSTRUCTION EQUIPMENT INC............................45
OKADA AMERICA ..................................................................48
QUANTOS AUCTIONS ..........................................................63
RITCHIE BROS AUCTIONEERS
TUSCALOOSA AL / RENO NV ......................................64
ROAD BUILDERS MACHINERY ........................................5,11
ROADTEC ..............................................................................33
SAKAI AMERICA INC ............................................................31
SULLIVAN PALATEK ................................................................9
TAKEUCHI ..............................................................................16
TOWMASTER ........................................................................71
VISIONAIRE INC ....................................................................18
VOLVO CONST EQUIP & SVCS ............................................2
WACKER NEUSON................................................................53
WIRTGEN AMERICA..............................................................29
YANMAR AMERICA ..............................................................51
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 9, 2014 • Page 71
Craig TaylorEquipmentAnchorage, AK907-276-5050
www.craigtaylorequipment.com
Coastline EquipmentOxnard, CA
805-485-2106www.coastlineequipment.com
Pape MaterialHandlingNewark, CA
510-790-3600www.papemachinery.com
RDO Equipment CoPhoenix, AZ
602-415-4700www.rdoequipment.com
Bobcat ofAlbuquerqueAlbuquerque, NM505-580-5803
www.bobcatofalbq.com
of Albuquerque
Page 72 • August 9, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
THE BEAST BRINGS EVERYTHINGYOU NEED TO GET THE JOB DONE.Tame your toughest jobs with the raw power of KOBELCO excavators. With features like an exclusive independent travel system, operator controlled power boost and a heavy-duty cooling system, you can count on KOBELCO to get more done in less time. Plus, premier operator comforts and industry leading visibility mean you’ll actually enjoy operating these machines.
KOBELCO-USA.COM
Up to 84 months of full machine coverage.
PROTECTIO
N P
LA
N
PREMIU
M