Wheel Loaders TL360 · TL420 · TL450 WHEEL LOADER · 2009. 9. 17. · wheel loader wheel loaders...

WHE

ELLO

ADER

Wheel Loaders TL 360 · TL 420 · TL 450

POW

ER,C

OMFO

RT A

ND A

PER

FECT

ALL

-ROU

ND V

IEW

.

TEREX_WHEEL_LOADER_GB_08_02 17.02.2006 14:43 Uhr Seite 1

2

The latest wheel loaders from TEREX. Pure power at maximum efficiency.

POWER, COMFORT AND A PERFECT ALL-ROUND VIEW

The latest generation of TEREX wheel loaders: completely redesigned.We have revised and refined four basic points in an intensive researchand development program.

And it’s all new:

1. Maximum productivity• High-volume, extremely high-torque Cummins engine• Optimized parallel kinematics: larger dumping height, exceptional shovel retraction force at the

final position and increased breakout force

2. Maximum efficiency • High-pressure hydraulics for precise movements (LUDV) irrespective of the load• Low maintenance cooling system with reversing fan

3. Exceptional driver comfort • Cab design offers an ideal view and a generously proportioned interior

4. Improved safety, less maintenance• Low-maintenance, hydraulic braking system• Emergency system, independent of the travelling gear


New performance levels:

WORK TO THE MAX.

4

A powerful kick-start: the new Cummins engine

Enormous thrust and hydraulic power: The new Cummins engines are impressive, with a generouspower range, especially at low speeds. And all with maximum efficiency and cost effectiveness. All ComIII guidelines are followed.

Further benefits:

• A larger diesel tank volume• Resistant to high sulphur concentrations• Cooling system with maintenance free, reversible fans• Cummins Service Network with over 5,000 employees in 160 countries

Powerful: The new parallel kinematics

Improved parallel kinematics: maximum power range and an optimum overview of the attachment. Ideal for all applications.

• Maximum breakout force and leverage: The position of the hydraulic cylinder has been optimised by new linkage points Our lifting equipment is lighter and more stable

• High shovel tipping force, even in the final positions• Extended dumping height• High-precision dumping

Impressive: the new hydraulic system

• The new high-pressure hydraulics with two variable displacement pumps adjusts automatically to the oil requirements of the respective function. For optimum performance with minimum fuelconsumption.

• Sensitive control and overlay of the lifting and tipping movements thanks to load-independent flow distribution (LUDV)

• Purge valves for rapid dumping at full extension from the pilot console• Self-activating shovel damping system


5

New vision:

AN EXCELLENT OVERVIEW

Impressive: the new cab design

• Windows from floor to ceiling for an ideal all-round view• Flat topped bonnet

A perfect view: the new hydraulic system

The clearly visible location of the cross-pipe in the lifting equipment means the driver always has an excellent overview of the material during loading and transportation.

A new degree of driver comfort:

WORK IN FIRST CLASS

Comfortable: the new driver’s cab

• Generously proportioned cab interior: more space to move around for bigger drivers • Ergonomic steps• 12 V and 24 V sockets

Operator-friendly: simplified maintenance

• Simple engine maintenance• Hydraulic engine hood• Additional foldable steps at the rear• Large and accessible wheel cover in sheet steel• Refuelling from ground level

Powerful: the improved air-conditioning system

The powerful air-conditioning system and efficient fresh air filtration creates an ideal working temperature, wherever you are in the world.


6

Excellent service:

ALWAYS GET AHEAD

Brake system

• A fully hydraulic, low-maintenance brake system

Cooling system

• The cool air intake system above the wing allows for long intervals between cooler cleaning • Coarse dust filter• Reversing fan• Free-standing cooler when the hood is raised

Electronics

• Electronic fill level monitoring when the engine is started (engine oil, transmission oil, hydraulics oil, coolant)

• Easily accessible central electrical system

Maintenance

• Cab tilts to the right

New environmental technology:

FOR A CLEANER POWERFUL PERFORMANCE

Environment

Extremely low fuel consumption means you can operate our machines with minimal ecological impact.And now even fluid changes are environmentally friendly thanks to the drain valve for the engine oil,transmission oil, hydraulics oil and the coolant.


7

New TL wheel loader:

IDEAL FOR ANY JOBFor all applications in industry and construction – the new TL wheel loadersalways deliver. The optimized parallel kinematics provides the high levels ofbreakout force required in all shovel positions.

The generous tilt-back angle supports the filling procedure and guarantees safe loading. Plenty of free space is also available for a large shovel operating angle and for all types of attachments.


DATA

SHEE

TTL 360 datasheet

8

Manufacturer and type Cummins QSC 8.36-cylinder in row

Output at 1,800 rpmas per SAE J 1995 (gross) 179 kW / 243 HP Maximum torque 1,085 Nm at 1,500 rpm Bore 114 mm

Stroke 135 mmPiston displacement 8,300 cm3

Exhaust gas emission values Complies with TIER 3 and EU Stage IIIA

Diesel engine

Standard operating weight approx. 19,000 kg Tipping load at full steering angle 13,000 kg Shovel capacity (at a density of 1.8 t/m3) 3.6 m3

Overall length 8,390 mmOverall width (shovel) 2,980 mmHeight (with driver’s cabin) 3,506 mm

Ground clearance 560 mmWheel base 3,379 mmRear overhang 2,185 mm

Breakout force 182 kNLifting capacity 245 kNStatic tipping load, straight 14,800 kg Lifting time with filled shovel 5.8 sec

Maximum height pivot pin 4,476 mmDumping height (without teeth) 3,233 mmReach (without teeth) 1,115 mmMaximum tipping angle 45°Tilt back angle in driving position 53°

Operating data and dimensions (tyres 23.5 R 25)

• Interior noise (sound pressure level) with doors and windows closed: 74 dB (A). Measured according to ISO 6394.• The exterior noise (sound power level) is 107 dB (A). Measured according to 2000/14/EC.

Noise levels


9

DATA

SHEE

T

LitreFuel tank 380Hydraulic oil tank and system 350

Filling capacity

26.5 R 2523.5 R 25Further tyres available on request

Tyres

Forward and reverse km/h1st gear 72nd gear 123rd gear 244th gear forwards 39

• (tyres 26.5 R 25)

Speeds

Delivery rate 350 l/min Operating pressure 280 bar

Hydraulic cycle timesLifting 5.8 secDumping overhead 1.7 secLowering 3.9 sec

Hydraulics


DATA

SHEE

TTL 420 datasheet

10

Manufacturer and type Cummins QSM 116-cylinder in row

Output at 1,800 rpmas per SAE J 1995 (gross) 216 kW / 290 HPMaximum torque 1,478 Nm at 1,200 1 rpm Bore 125 mm



Diesel engine


Overall length 8,290 mmOverall width (shovel) 3,000 mm Height (with driver’s cabin) 3,640 mm

Ground clearance 420 mmWheel base 3,530 mm

Vehicle turning radius 7,140 mm Rear overhang 2,170 mm

Departure angle at the rear 32°


Maximum height pivot pin 4,420 mmDumping height (without teeth) 3,145 mmReach (without teeth) 1,120 mm

Maximum tipping angle 45°Tilt back angle in driving position 53°

Operating data and dimensions


Noise levels


11

DATA

SHEE

T


Filling capacity

26.5 R 25

Further tyres available on request

Tyres


• (tyres 26.5 R 25)

Speeds



Hydraulics


DATA

SHEE

TTL 450 datasheet

12

Manufacturer and type Cummins QSM 116 cylinders in row

Output at 1,800 rpmas per SAE J 1995 (gross) 231 kW / 310 HP Maximum torque 1,575 Nm at 1,400 rpm Bore 125 mm



Diesel engine


Overall length 8,290 mmOverall width (shovel) 3,200 mm Height (with driver’s cabin) 3,640 mm

Ground clearance 420 mmWheel base 3,530 mm

Vehicle turning radius 7,230 mm Rear overhang 2,170 mm

Departure angle at the rear 32°


Maximum height pivot pin 4,420 mmDumping height (without teeth) 3,145 mmReach (without teeth) 1,120 mm

Maximum tipping angle 45°Tilt back angle in driving position 53°

Operating data and dimensions


Noise levels


13

DATA

SHEE

T


Filling capacity

26.5 R 25

Further tyres available on request

Tyres


• (tyres 26.5 R 25)

Speeds



Hydraulics


EQUI

PMEN

T

14

- Cummins diesel engine- Low emissions in accordance with TIER 3 and EU Stage IIIA- High-pressure direct injection system- Water-cooled exhaust turbocharger- Intercooler- Crankcase ventilation with oil separator- Fuel filter (pre-cleaner/main filter)

- Water separator- Long-life coolant (anti-freeze protection up to -34º)- Air filter (dry air filter with main and safety cartridges)

- Air intake located in a low-dust area above the wings- Coarse dust filter- Temperature-controlled radiator cooling fan

- Failsafe system (fan operates at maximum speed in the event of an elec-trical fault)

- Manual or automatic direction switch- Radiator cooling fan pivots from the radiator when opening the bonnet

Standard- and special equipment TL 360 · TL 420 · TL 450

Driver’s cabin

Cooling system

Engine

- Central fuse, relay and terminal box- 24 V system- 2 maintenance-free starter batteries- Main battery switch- Alternator

- Starter, 24 V- Key starter switch- Halogen working lights- Lights in accordance with the German Road Traffic Licensing Regulation

(on TL360 and TL420)

Electrical equipment

- Comfort and safety driver’s cabin with integrated rollover bar in ROPS and FOPS design according to ISO 3471 and ISO 3449.

- Large glazed area reaching down to the floor- Door on the left- Ventilation window and right-hand emergency exit- Overpressure driver’s cabin with filtered air- Air conditioning and defrost function- 3-speed fan- Tiltable, supported on 4 hydraulic bushings- Storage compartments for first aid kits and operating instructions- Drinks holder- Steering wheel adjustable in height and tilt- Air-suspended driver’s seat with reach and height adjustment, ergonomi-

cally designed, lumbar adjustment - Automatic lap belt- Two external mirrors- Interior rear view mirror

- Well laid-out instrumentationFuel reserve displayCoolant temperatureTachometer

- Pilot control switch- Safety cutout switch, electric (for road travel)- Sun roller blind (front windscreen)- Signal horn, electric- Warning/indicator lights

Battery powerBrake oil pressureParking brakeGearbox oil filterHydraulic oil filterEngine oil pressure

- Windscreen wiper interval switch (front)- Wash/wipe system (front/rear) with integrated spray nozzles- 12 V and 24 V power sockets- Stereo radio


- Hydrodynamic transmission- Torque converter- Automated gear shifting

- Multi-plate self-locking differentials, front / rear- Rear axle oscillation ± 12°

Power transmission/Axles

15

EQUI

PMEN

T

Hydraulic system

- Parallel kinematics - Rapid dumping when the pilot control is at full lock

- Hydraulic engine hood- Oil drain valve (diesel engine, gearbox, hydraulic tank, radiator)- Electric fill level indicator when starting the diesel engine (engine oil,

transmission oil, hydraulic oil, coolant)- Cast rear weight designed to offer ram protection- Part central lubrication via the lubricant distributor

- Steel wings (front and rear)- Lockable battery case- Hitch (incl. tension bolts)- Vehicle tool kit (for immediate assistance)- White/gray TEREX paint

Additional standard equipment

Special equipment / Optional upgrades

- Hydrostatic articulated steering (40° to both sides)- Adjustable piston pump with pressure and flow control- Steering unit supplied as a priority

- Two dual-acting cylinders with end-absorption- Automatic electric emergency steering pump

Steering

- Wet, enclosed, oil-cooled brakes on all four wheels - Dual-circuit safety system

Brakes

- German Road Traffic Licensing Regulation kit (for TL360 and TL420)- Automatic central lubrication system- Auxiliary heating- Odour reducing filter- Rotating beacon- Fire extinguisher- Speed limiter- Back-up alarm- TV monitoring system with rear camera- Occasional seat- Multi-lever control levers combined with gearshift mounted on the

steering column

- Biologically decomposable hydraulic oil- Diesel smoke particulates filter

- Hydraulic quick-change device- Third control circuit with preselectable values for pulse and continuous

operation - Hydraulic locking circuit

- Weighing facility- High-lift framework

- Tyre protection chains- CaCl2 filling for the tyres on the rear axle- Flat-proof tyres- Ejector

- Special paint

- TÜV approval for transport on public roads (TL360, TL420)

Further special equipment available upon request.

- Two adjustable piston pumps with pressure and flow control- Two circuit control blocks with load sensing flow distribution- Full-flow return filter- Lifting cylinder with end position damping

- Load stabilizing system with automatic engagement disengagement- Hydraulic pilot control- Emergency lowering system

Shovel mounting


Dealer

www.terex.comFor further information, please contact your local distributor or the TEREX sales office listed. TEREX pursues a policy of continuous deve-lopment for its products. Product specifications are subject to change without notice or obligation. The photographs and drawings in this brochure are for illustrative purposes only. Refer to the appropriate Operator's Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator's Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular product and sale. TEREX makes no other warranties, whether expressed or implied.

Copyright ©02.2006

Administration and factory

TEREX-Kaelble GmbH Theodor-Heuss-Straße 6D-49377 VechtaTel. +49(0)4441-9057-0Fax +49(0)4441-9057-710

[email protected]


Date post:	02-Feb-2021
Category:	Documents
Upload:	others
View:	6 times
Download:	0 times

Wheel Loaders TL360 · TL420 · TL450 WHEEL LOADER · 2009. 9. 17. · wheel loader wheel loaders...

Documents