Date post: | 06-Aug-2015 |
Category: |
Business |
Upload: | paula-hynes |
View: | 24 times |
Download: | 3 times |
© The Rodon Group. All rights reserved, 2014.
When to Use a Precision Molder
Like anything in life, there are degrees of perfection
This is also true in plastic injection molding
© The Rodon Group. All rights reserved, 2014.
What is a precision injection
molding company?They manufacture parts that need
to meet exact specifications
- Specializes in close tolerance molds
- Tooling built for resin variances
- Produces high-volume parts- Hardened steel molds for long
production runs
When to use a precision molder
Your part…..– Must meet very tight specifications– Has complex geometries– Require long-lasting performance– Must meet FDA, RoHS or other guidelines– Require consistent, long-term results
© The Rodon Group. All rights reserved, 2014.
When you to use other molders
Your part…– Doesn’t need to meet exact specifications– Imperfections like flash are acceptable– The production run is small– Only prototypes are required– Has a short usage life span– Is fairly simple in design
© The Rodon Group. All rights reserved, 2014.
© The Rodon Group. All rights reserved, 2014.
Other molding options
Additive manufacturing (3-D Molding)
- Good for low volume, prototype molding
Low volume molding using aluminum tools- Good for shorter production runs
High volume, low precision molds
- Good for products where variations are acceptable
- Example – plastic forks
© The Rodon Group. All rights reserved, 2014.
The Rodon Group
If your project requires a precision injection molder, please give us a call at 215-822-5544 or send us an email at
We want to be your on-shore precision molding solution