WINDROW ELEVATORS

ENGINEERED INNOVATION

The road to success starts with the right windrow elevator.When there is a long road to pave, and you need to get the job done quickly, turn to the

Weiler E650C and E550C windrow elevators. With a proven high-slat entry position and

operator accessible chain speed and direction control, these rugged, feature-packed

units help lead the way to high-production paving. The road to success starts with the

right windrow elevator, and Weiler windrow elevators are designed to handle the

toughest conditions while exceeding expectations.

RELIABLE, DURABLE ENGINE

The Cat® C4.4 Tier 4 engine with 137 hp (102 kW) produces clean, quiet power.

HIGH-TORQUE, DIRECT DRIVE MOTOR ELIMINATES GEARBOX

The elevator is powered by a high-torque, direct-drive motor which eliminates a gearbox

and is kept cool by a loop flush return system.

HIGH-SLAT ENTRY TACKLES TALL WINDROWS

The high-slat entry enables the machine to tackle tall windrows laid by belly dump

trucks on high-production or wide-width jobs.

The optional transport axle simplifies transportation of the E650C or E550C windrow elevator.

The axle and tires are rated at 22,500 lb (10 205 kg) and can tow the elevator at highway speeds. The axle quickly pins on and off the elevator and includes a hydraulic tongue for convenient hook-up to the tow vehicle.

The axle without the elevator can be moved via skid steer, loader bucket or pintle hitch pulled by a truck, to move from one end of the jobsite to the other.

The standard sliding hitch (left) allows for toolless, easy paver hook-up.

The optional hydraulic push pin frame (right) is available on both the E550C and E650C.

E550C• 121” (3073 mm) wide throat delivers high production

• Independently control the height of each side of the machine

• 60” (1524 mm) conveyor with 600 tph (544 mtph) capacity

• Manually adjustable outer scrapers ensure clean mat for elevator and paver

• Operating controls located on each side of the machine

• Manual hydraulic valves keep the system simple

• 84” (2134 mm) discharge height for increased paver hopper material storage

• Optional remix discharge hopper provides consistent material mix to the paver and

hydraulically moves into and out of position

WEIGHT

HEIGHT

LENGTH

LENGTH (RAISED TOW FRAME)

WIDTH (WINGS IN)

WIDTH (WING OUT)

ENGINE

HORSEPOWER

ELEVATOR THROAT WIDTH

ELEVATOR SLAT WIDTH

ELEVATOR SLAT DEPTH

DISCHARGE HEIGHT

FRONT WHEEL CYLINDER LIFT

FUEL TANK CAPACITY

HYDRAULIC CAPACITY

21,400 lb 9707 kg

124” 3150 mm

220” 5588 mm

186” 4724 mm

103” 2616 mm

125” 3175 mm

Cat® C4.4 Tier 4

137 hp 102 kW

121” 3073 mm

58” 1473 mm

7” 178 mm

84” 2134 mm

8” 203 mm

50 gal 189 L

40 gal 151 L

OPTIONAL EQUIPMENTSPECSTransport axle

Hydraulic tongue

Hydraulic pin push frame

Remixing discharge hopper

Chromium carbide floor plates

Spray down for chains and sprockets

LED lights

Opposite side hydraulics control

E650C• 118” (2997 mm) wide throat with 29” (736 mm) augers deliver high production

• 3-point suspension consisting of hydraulic cylinder for each front wheel and inter-connected

cylinders for the rear wheels

• 60” (1524 mm) conveyor with 600 tph (544 mtph) capacity

• Three independent, adjustable scrapers ensure a clean surface for the elevator and paver

• Operating controls located on each side of the machine

• Variable hydraulic drive system allows speed of conveyor to match material and production

requirements

• 84” (2134 mm) discharge height for increased paver hopper material storage

• Optional remix discharge hopper provides consistent material mix to the paver and

hydraulically moves into and out of position

WEIGHT

HEIGHT

LENGTH

LENGTH (RAISED TOW FRAME)

WIDTH (WINGS IN)

WIDTH (WING OUT)

ENGINE

HORSEPOWER

ELEVATOR THROAT WIDTH

ELEVATOR SLAT WIDTH

ELEVATOR SLAT DEPTH

AUGER DIAMETER

DISCHARGE HEIGHT

FRONT WHEEL CYLINDER LIFT

FUEL TANK CAPACITY

HYDRAULIC CAPACITY

23,800 lb 10 795 kg

124” 3150 mm

230” 5842 mm

188” 4775 mm

122” 3099 mm

184” 4674 mm

Cat® C4.4 Tier 4

137 hp 102 kW

118” 2997 mm

58” 1473 mm

7” 178 mm

29” 737 mm

84” 2134 mm

8” 203 mm

80 gal 303 L

40 gal 151 L

OPTIONAL EQUIPMENTSPECSTransport axle

Hydraulic tongue

Hydraulic pin push frame

Remixing discharge hopper

Chromium carbide floor plates

Spray down for chains and sprockets

LED lights

Remixing Discharge Hopper

WWW.WEILERPRODUCTS.COM

Materials and specifications are subject to change without notice. Featured machines and photos may include optional equipment. See your Caterpillar Dealer for complete product and application information including available options. All rights reserved.

© 2018 Weiler QEDQ1814-01