WSS_ProdCat_2013_lowres_final_v2

PRODUCT CATALOGUE

OPTimisinG PERfORmAnCE

mARinE PRODUCTsmARinE ChEmiCALssAfETymARiTimE LOGisTiCsshiPs AGEnCy

WSS PRODUCT CATALOGUE - TABLE OF CONTENTS

General information 20Pumps 30

Barrel Pumps 32Chemical pump lever type 32

1:1 Oil pump with spout 33

2:1 Chemical pump SST316 34

Chemical Applicators 3510:1 Hydra Clean Chemical Applicator 35

2:1 Chemical applicator 36

Double Diaphragm Pumps 37Double diaphragm pump 307 polypropylene 37

Double diaphragm pump 515 polypropylene 38

Double diaphragm pump 716 Stainless Steel 39

Double diaphragm pump 1050 polyproplylene 40

Double diaphragm pump 1050 aluminium 41


Double diaphragm pump 1590 polypropylene 43





Double diaphragm pump accessories 48

Grease Pumps 49Grease pump 50:1, for 50 kg drums 49

Chemical Applicators Accessories & Spares 50HP Extendable Lance 5.5 m 50

Double Diaphragm Accessories & Spares 51Drum suct. kit for 515/716 51

Service kit for 515/716 51

Paint Spraying 52Airless Paint Spraying Equipment 54

Unitor Hurricane 25D 54

Unitor Hurricane 32 55



Accessories for Airless Paint Spraying Equipment 58Polegun for paint spraying 58

Airless Paint Spraying Equipment Acc. 58

Agitator Gallon pail 59

Airless paint spraying gun 59

Consumables for Airless Paint Spraying Unit 60HD rac tip 60

Throat seal liquid 1 L 60

Rep Kits and Spare Parts for Airless Paint Spraying Equip 61Rep kit Hurricane 61

Air Tools 62Air Line Equipment 64

Air hose, PVC 64

Air hose, rubber 64

Air line unit fil/reg/lub 65

Flexible hose 30cm 3/8" 66

Hose clamp for 3/8" hose 66

Air Gun 67Air gun AG-PRO 67

Deck Scalers 68Deck planner DP-PRO 200 68

1

Deck scaler DSH-PRO 11 69

Drills 70Drill reversible AD-PRO 1800 70

Grinders 71Angle grinder AG-PRO 4 B version 71

Angle grinder 72

Die grinder DG-PRO 73

Impact Wrenches 74Impact wrench 74

Needle Scalers & Chipping Hammers 75Needle scaler JEX-2800 low vibration 75

Needle scaler NS-PRO 19 76

Needle scaler NS-PRO 19 - straight 77

Needle scaler NS-PRO 78

Chisel scaler CS-PRO 79

Chisel hammer CH-PRO 80

Quick Couplers 81USH socket 81

USM socket 82

USF socket 83

UPH plug 84

UPM plug 85

UPF plug 86

Unitor drain valve 86

Unitor quickview pressure gauge 87

Unitor Medusa air distributor 87

Drills - Accessories, consumables & spares 88Drill bit set metric - high speed steel 88

Deck Scalers - Accessories, consumables & spares 89Hammer replacement kit DSH-PRO 11 89

Cutting wheel replacement kit for DP-PRO 200 89

Ear Clamps & Hose Clamps 90Hose clamp 90

Clamp 1 ear 91

Grinders - Accessories, consumables & spares 92Plastic pads for AG-PRO 92

Grinding stones set 10 pcs 92

Cutting discs 93

Cutting discs inox 93

Grinding discs 94

Sanding disc 95

Mop discs 96

Impact Wrenches - Accessories, consumables & spares 97Impact socket set 97

Scalers & Chipping - Accessories, consumables & spares 98Piston replacement kit 98

Needles for NS-PRO series 98

Scraper for CS-PRO 62 & 120 99

Chisel set for CH-PRO 99

Quick Couplers - Spares 100Rubber packing for 20-30-40 100

Rubber packing for 400-600 100

Workshop Equipment 102Wire Lubricator 104

Unitor wire rope lubricator UWL77 104

Unitor wire rope lubricator UWL35 105

Wire Lubricators Accessories 106Lubricator chamber for UWL35 106

Lubricator chamber for UWL77 106

2

Seal kits for UWL35 106

Seal kits for UWL 77 107

Working Lamps 108Lamp cordless F/7.2-12 V batteries 108

Saws & Cutters 109Circular saw, 160 mm 109

Jig saw 110

Bench cutter 111

Drills 112Battery drill 12 V 112

Drill, chuck size 1-10 mm 113

Drill, chuck size 3-16 mm 114

Percussion drill PD2E 22 R 115

Grinders 116Angle grinder 5", 10000 rpm 116

Angle grinder 7", 8500 rpm 117

Angle grinder 9", 6600 rpm 118

Drills 119Drill bit set imperial - high speed steel 119

Battery nicd 18 V/2.0A 119

Battery charger 7.2-24 V/50-60HZ 119

Cutter 120Hydraulic nut splitter 120

Flange Spreader 121Hydraulic flange spreader 121

Pump & Cylinders 122Hydraulic pump cylinder set 122

Hydraulic pump low cyl. set 123

Hydraulic cylinder 124

Hydraulic cylinders 125

Hydraulic pump electric 230VAC 125

Hydraulic pump, air roper, max 700bar 126

Hydraulic cylinder, 50T 127

Hydraulic hand pump, max 700 bar 128

Accessories for Hydraulic Equipment 129Gauge, hydraulic 129

Regulator-filter-lube 129

Tension meter, cap. 4.5 T 130

Hydraulic cutter head, cap. 20 T 130

Replacement blade 131

Hydraulic hose for high pressure 131

Hydraulic coupler 131

Fittings - Adaptor, Hexagon nipple, Coupling, Cross, Tee & Reducer 132

Gauge, hydraulic pressure 133

Valve, flow control 133

Cleaning Equipment 134HP Cleaners 150 - 220 bar 136

High pressure cleaning 136

HP Cleaner HPC 30, 1x220 V/60 Hz 138

HP Cleaner HPC54 200 bar, 3x220-380 V/50 HZ 140

HP Cleaner HPC54 200 bar, 3x220-440 V/ 60 HZ 142

HP Cleaner HPC62 220 bar, 220-440 V/60 HZ 144

HP Cleaner HPC66 190 bar, 3x220-440 V/60 Hz 146

HP Cleaner HPC66 190 bar, 3x220-380 V/50 HZ 148

Spares/Accessories - Cold Water HP Cleaners 150 - 220 149Deck hose low friction 25 m 149

Heavy duty hose 10 m 150

Heavy duty hose 15 m 151

Heavy Duty Hose 25 m 152

3

Non blackening hose 10 m 153

Non blackening hose 25 m 154

Chemical Injector 155

Double lance 200 cm 155

Drain cleaner complete kit with 20 m hose 156

Foam Injector 156

Foam Lance 157

Hose quick coupling set 157

HP Extendable Lance 5.5 m 158

Nozzle 06/25 for Extendable Lance 158

Stainless Steel Cleaning Trolley 159

Rotary Brush 80 cm 159

Rotary Brush 170 cm 160

Spray handle 3000 160

Tornado Short Lance 10 cm 161

Tornado Normal Lance 92 cm 161

Powerspeed Lance 162

Tornado normal lance 104 cm 162

Nozzle 05/25 degree for Extendable Lance 163

Nozzle 06/0 degree for Extandable Lance 163

Nozzle 05/0 degree for Extendable Lance 163

Universal 3000 Lance 164

Washing Brush 235 cm 164

Hot Water HP Cleaners 165HP Cleaner HPCH53 HW, 200 bar 60 HZ 165

Spares & Accessories for Hot HP Cleaners 167Rotary Brush 80 cm 167

Repair kit safety valve HPCH53&Solar 167

Repair kit bypass valve for HPCH53 167

HP Cleaners 300 - 500 bar 168HP Cleaner HPCE330 310 bar, 3x440/60 Hz 168

HP Cleaner HPCE405 385 bar, 3x440 V/60 Hz 169

HP Cleaner HPCE520 500 bar, 3x440 V/60 Hz 170

HP Cleaner HPCE520 high flow 500 bar, 3x440V/60 Hz 171

Air Driven HP Cleaners 172HPC Airclean 25 172

HPC Airclean 32 173

HPC Airclean 48 174

Spares & Accessories for HP Cleaners 300 - 500 bar 175Powerspeed Attachment, HPCE330 175

Sandblasting Pack, HPCE330 and 405 175

Powerspeed Attachment, HPCE520 176

Sandblasting Pack, HPCE520 176

Water filter insert extreme 177

Extreme High Pressure hose - 10 m 177

Extreme High Pressure hose - 25 m 178

Spares & Accessories for Air Driven HP Cleaners 179Single Lance HPC Airclean 179

High Pressure hose, HPC Airclean 179

Stationary Cold Water Cleaners 180Duo booster 3X440 V 60 HZ 160 BAR 180

Delta booster-3 3X440/60 182




Uno booster 3X440 V 60 HZ 160 BAR 190

Spares & Accessories Cold Water Stationary Systems 191Take off valve A for sationary acid proof 316 191

Take off valve A for stationary Chromium plated brass 191

4

Stationary Hot Water Cleaners 192Solar booster with 18 KW heater, 3x440 V/60 Hz 192

Solar booster with 18 KW heater, 3x400 V/50 Hz 194

Wet & Dry Cleaning Units 195VCWD20 wet and dry vacuum cleaner 195

VCWD70 wet and dry vacuum cleaner 196

VCWD27 wet and dry vacuum cleaner 198

VCAD200 wet and dry vacuum cleaner 199

Accessories & Spares Vacuum Cleaners 200Suction hose 1.8 M for VCWD18 200

Straight tube VCD15 & 27 200

Water hose & suction hose fro VCCW24 200

Carpet nozzle for VCCW24 200

Deck scrubbing adapter for VCCW24 200

Suction hose 4m for VCWD 70 201

Large deck cleaning kit for VCWD 70 201

Liquid removal kit for VCWD 70 201

Curved tube 100 cm for VCWD 70 201

Mucking Pumps 202Mucking Pump - Marine GM2 202

Mucking Pump - Accessories, consumables & spares 203Vacuum kit for mucking pump 203

Camloc connector 102 mm table D fleng for mucking pump 203

TPI connectors for mucking pump 203

Butterworth connectors for mucking pump 203

Cargo Hold Cleaning Kit 204Cargo Hold Cleaning Kit - Handymax 204

Cargo Hold Cleaning Kit - Panamax Light 205

Cargo Hold Cleaning Kit - Panamax 206

Cargo Hold Cleaning Kit - Accessories, consumables & spares 207Extension for chemical applicator lance 207

Cleaning Jets 208Tornado 2 Cargo Hold Cleaning Jet 208

Tornado 3 Cargo Hold Cleaning Jet 209

Tornado 4 Cargo Hold Cleaning Jet 210

Ultrasonic 211Unitor Ultrasonic Cleaner S-700/HM, 110 V 211

Unitor Ultrasonic Cleaner S-700/HM, 230 V 212




Multi-Frequency Generator, MF 2000 217



Immersible Ultrasonic Transducer, MF-TS 600 220




Gases, refrigerants and cylinders 224Acetylene 226

Acetylene A-40 filling 226

Acetylene A-5 filling 227

Oxygen 228Oxygen O-40 filling 228

Oxygen O-5 filling 229

Nitrogen 230Nitrogen N-5050 filling 230

Nitrogen N-5030 filling 231


5


Cruise gas 234Propane P-5 filling 234

Helium H-40 filling 235

Carbon dioxide filling 236

Nitrogen food Grade N-10FG filling 237

Breathing oxygen 238Breathing oxygen MOX-2 filling 238

Breathing oxygen MOX-5 filling 239

Breathing oxygen MOX-40 filling 240

Argon 241Argon E-50 filling 241

Argon E-10 filling 242

Unimix 20 M-10 filling 243

Unimix 20 M-50 filling 244

Nitrogen mixtures 245Ammonia 245

O2 in Nitrogen in SG10 cylinder 246

CO2 in Nitrogen/air in SG10 cylinder 247

Ethanol 248

Disposables 249MInimix Disposable Cylinders 249

LEL mixtures 250LEL mixtures 250

Pentane 49% LEL in air C5H12 (0.68% vol) in SG50 cylinder 252

Regulators 253Regulator R-510 for Spangas SG10 cylinders 253

Regulator for Scotty 58/VI disp. cylinder 253

Regulator for Minimix disposable cylinder 253

Bracket for SG10 cylinder 253

Hycool marine 254Hycool marine 45 254

Hycool blue additive 25 L can 254

R-134a 255Unicool R-134a 57 kg refrigerant 255

Unicool R-134a 12.5 kg refrigerant 256

R-22 257Unicool R-22 57 kg refrigerant 257

Unicool R-22 12.5 kg refrigerant 258

R-404A 259Unicool R-404A 45 kg refrigerant 259

Unicool R-404A 9.5 kg refrigerant 260

R-407C 261Unicool R-407C 52 kg refrigerant 261

Unicool R-407C 11 kg refrigerant 262

R-410A 263R-410a 45 kg refrigerant 263

R-410A 9.5 kg refrigerant 264


Unicool R-417A 11 kg refrigerant 266

R-422D 267Unicool R-422D 52 kg refrigerant 267


R-507 269Unicool R-507 45 kg refrigerant 269

Unicool R-507 9.5 kg refrigerant 270

Refrigerant recovery cylinders 271

6

Recovery cylinder 21,6 l + documents 271

Recovery cylinder 56 l + documents 272

Complete installations for Ox/Ac 273Central installation for Acetylene + Oxygen 273

Cylinder racks 274Rack for cylinders 274

Gas cylinder cabinets 275Gas Cylinder cabinet 275

High pressure components 276High pressure components 276

Low pressure components 277Low pressure components spare parts 277

Leak detection spray 300 ml 278

Outlet station 279Outlet station 700 complete with S55 flashback regulators and steel cabinet 279

Outlet station 700 with steel cabinet but without flashback arrestors 279

Steel cabinet for outlet station 700 280

Fibre glass cabinet for outlet station 700 280

Adaptor set for outlet station 700 281

Twin valve unit for outlet station 700 281

Regulator R-530 for Acetylene 282

Regulator R-530 for Oxygen 282

Stretch relief bracket for twinhose 283

Shielding gas installations 284Shielding gas installation for cylinders 284

Refrigeration equipment 286Lubricants 288

Refrigerant oil, POE, low temperature 288

Refrigerant oil. Poe, high temp 289

Refrigerant oil, mineral, high temp 290

Package Equipment 291Unitor drinking water cooler, 230 V 291

Unitor drinking water cooler, 115 V 292

System Equipment and Accessories 293Refrigerant charging station UCS-200 293

Liquid line drier core 48 DN 294

Charging hose HP 1350 mm 294

Cylinder stand 295

Top valve adaptor set for Unicool refrigerant cylinders UVA-001 295

Collection of fittings, 1/4 - 3/8" 296

Collection of fittings, 3/8 - 5/8" 297

Fixed leak detector kit, 4 channel, MRD4S-2L 298

Fixed leak detector kit, 6 channel, MRD6S-2L 300

Fixed Leak detector Kit 4 Chanels IP66 302

Fixed leak detector, MSPH sensor 303

Fixed leak detector, IP66 sensor 304

Fixed leak detector, safety V/V vent pipe sensor 305

Fixed leak detector, AHU/DUCT sensor 306

Fixed leak detector, 4 core cable 306

Tools 307Digital dual thermometer 307

Marine thermometer kit UTK-100 308

Surface probe thermometer 310

Air probe thermometer 310

Needle probe thermometer 311

Wire thermocouple probe 311

Inrafred thermometer 312

Vacuum pump, standard, 115/230 V 313

Vacuum pump, Heavy duty, 115/230 V 314

7

Vacuum pump oil 0.95 l 315

Vacuum gauge 0-1000 MBAR 315

Digital vacuum gauge UVG-64 316

Electronic vacuum gauge UVG-150 317

Charging/Vacuum Hose UCH-72Y 318

Vacuum valve assembly 319

Hand oil pump 5 L & 25 L drums 320

Acid test kit mineral + AB oils 320

Acid test kit poe oils 320

Refrigerant leak detection kit, UV tracer kit 220/240 V 321

Refrigerant leak detection kit, UV tracer kit 12 V 322

Refrigerant leak detection, UV, tracer fluid for mineral oil 323

Refrigerant leak detection, UV, Universal tracer fluid for all oil types 324

Refrigerant leak detection, UV, glo-klenz cleaner 324

Spare bulb 110/220 V 100 W 325

Spare bulb 12V 100W 325

Hand held refrigerant leak detector UNIRX-1A 326

Maintenance kit leak detector-XP2 327

Refrigeration handy tools case 328

Tube cutter UPT-274-FC 329

Tube bender, triple head 329

Flare tool 330

Flaring set 330

Flare/Swage set 3/16" - 3/4" 331

Inner-outer reamer 331

Ratchet Wrench Small 1/4" - 3/8" - 3 & 5/16" 332

Ratchet Wrench Big 1/2" - 1/4" - 5 & 9/16" 332

Magnet & Volt Sticks Pack 333

Charging hose set UCH-72 3 x 1.8 m 333

Deluxe service manifold set 2-WAY, R-410A 334

Deluxe service manifold set 4-WAY, various refrigerants 335

Refrigerant recovery package, 115 V 336

Refrigerant recovery package, 230 V 338

Refrigerant recovery unit, URU-5000B, 115 V, 50/60 HZ 340

Refrigerant recovery unit, URU-5000A, 230 V, 50/60 Hz 342

Recovery unit URU-5000A/B, compressor repair kit 344

Recovery unit URU-5000A/B, piston seal repair kit 344

Recovery unit URU-5000A/B, valve repair kit 344

Recovery unit URU-5000A/B, shaft seal repair kit 344

Recovery unit URU-5000A/B, connection kit 345

Recovery unit URU-5000A/B, inlet filter drier 3PCS, 1/4" Flare 345

Digital weighing platform ADS-100 346

Onboard storage box for refrigerant recovery package 347

Charging Hose - 1.8 m, 1/4" Flare 9881268 Cl-72-Y Yellow 347

Filter driers UFD 2 PCS 348

Activated alumina beads 349

Silica gel desiccant 349

Welding 350Gas Cylinder Regulators and Flashback Arrestors 352

Regulators 510 352

Flashback arrestor W-66S 353

Flashback arrestor S55 354

Gas Hoses and Couplings 355Gas hoses 355

Reel, self retracting with 20m 6.3 mm twin hose Ac/Ox 356

Reel with crank for welding cable and gas hoses 356

Hose joint for gas hoses 357

hose clamp 357

Pincher tool for hose ear clamps 357

8

Quick couplings 358

Gas Welders Accessories 359Safety welding goggles, lift front for gas welding 359

Glasses for gas welding goggles 359

Safety spectacles clear for eye protection 360

Safety spectacles shade 4 for brazing and gas welding 360

Safety grinding goggles with anti mist acetate lens 361

Heat resistant mitten for gas cylinders 362

Gas/TIG softskin welding gloves, 6 pairs 362

Gas ignitor triplex 2 pcs for gas welding 363

Gas ignitor triplex spare flint set. 10 pcs 363

Welders chalk, flat 5x13x127. 144 pcs/pack 364

Temperature indicator kit 364

Galvanizing spray. 6 pcs 364

Welding, Brazing & Cutting Torch 365UCT-500 Combination torch master kit for gas welding/cutting 365

UCT-500 combination torch compact kit for gas welding/cutting 366

Shank with non-return valves for Ac/Ox combination torch 367

Nonreturn valve 367

Welding attachments 368

Multiflame heating attachment 368

Cutting attachment with head angle for UCT-500 369

Cutting nozzle 370

Gouging nozzle 370

Guide standard 371

Spare part kit complete 371

Spanner for torch 372

Cleaning needles set for torch 372

Transportable Gas Welding Equipment 373Trolley A40/O40 gas weld. 373

Trolley 1 SU-10 374

Trolley A-5/O-5 gasweld for portable equipment 375

Back portable rack f/A5- +05-cyl. 376

Portable rack for A5+05 cylinder 377

Standard gas accessories for mobile equipment 378

Portable welding table 379

Gas Welding Cabinet 380Gaswelding cabinet empty 380

Gaswelding cabinet complete with torch, rods & fluxes 381

Gas Welding and Brazing Consumables 382Gas welding and brazing consumables 382

Arc welding/cutting machines 384UWI-150 Autoline Welding Inverter 384

UWW-161 MP Multi Process Welding Inverter 386

UWI-203 Stick / TIG 388

UWR-303 welding rectifier 390

Accessories for UWR-303 392

UWI-400 welding inverter 393

Accessories for UWI-400 395

UWF-SC 12 RC wire feeder 396

UWR-852 Welding rectifier 398

UPC-1041 Plasma Cutter 400

Cables and Connectors 402Welding cable 402

Cable connector 403

Cable shoe 403

Adapter Plug Dix Female 70 and Male 25; 2 pcs per pack 404

Parallel connecting three way connector DIX70 male-female-female 2 pcs 404

Conversion assem. 2 pcs 404

9

Remote control for UWR-303 with belt clip 405

Remote control cable 10m for UWR-303 405

Extension cable 25m 4 PIN for UWR-303 remote controls 406

Remote control for UWI-400 for el holder/tig torch 406

Extension cable a 25 m for UWI-400 remote controls 407

Parallel connection cable for UWI-400 remote controls 407

Stick electrode arc accessories 408Electrode holder assembly 408

Electrode holders 408

Air carbon arc torch 600A with safety and air connection 409

Air carbon arc torch heavyduty 1600A 409

Return clamp assembly 410

Return clamps 410

TIG Welding Accessories 411TIG welding accessories 411

TIG torch-T-150 w dix 25 connector 412

Remote control for UWI-150 autoline 413

TIG Torch T-161 with 4 m cable, euro connector and torch mounted trigger 414

TIG torch T-200 w dix 70 connector 415

Accessories kit TIG torch 417

Tungsten electrode 1.6mm alloyed for DC TIG welding 418

Tungsten electrode 2.4mm alloyed for DC TIG welding 418

Wire Welding Accessories 419Wire torch T-400 with 3m cable for S-12RC/S-22 P12/UWF-MP 419

Driveroll and wire guide kits for wire feeder sc 12 rc 420

Spool compression spring 421

Spool adapter 421

Wire torch M-161 with 3m cable and euroconnector for UWW-161 MP 422

Drive roll 422

Shielding gas accessories 423Argon regulator 423

CO2 regulator 424

Flowcontrol needle valve for gas flow adjustment 425

Flowcontrol meter, argon for use at torch nozzle 425

Plasma cutting accessories 426Consumables kit complete for UPC-1040 426

Accessories for UPC-1040/1041 426

Current distribution system 427Current distribution system 427

Inlet station welding current 400A 428

Outlet station welding current 400A 429

Inlet station welding current 800A 430

Outlet station welding current 800A 430

Remote connection cable for UWI-400 6m, 14 pin female/10 pin male 431

Remote connection cable for UWR-303 6m, 4 pin male/10 pin male 431

Remote control adapter for UWI-400 14 pin female/10 pin male 432

Remote control adapter for UWR-303 4 pin female/10 pin male 432

Welder's Protection 433Autovision Plus Fresh Air Weldshield with respiratory unit 433

Autovision plus welding shield 434

Flipvision welding face shield with headband and shade 11 glass 435

Safety helmet with face shield and shade 11 glass 436

Face shield with handle and filter shade 11 glass 437

Arc welding glasses 438

Autovision outside cover lens 10pcs 438

Autovision inside cover lens 10pcs 438

Protective clothing 439

Welding curtain with hooks 440

Welding spatter blanket 1 x 10mm on roll 440

10

Fume Clean 230 complete 441

Welder's Tools 442Wire Brush 442

Chipping hammer 442

Welding gauge type J for throat thickness and reinforcement 443

Multi purpose plier for wire torch 443

Welders chalk, flat 5x13x127. 144 pcs/pack 444

Temperature indicator kit 444

Galvanizing spray. 6 pcs 444

Anti spatter spray, 400 ml in a box, 6 pcs 445

Magnaflux crack detection kit 446

Cleaner SKC-S. 10 pcs 447

Penetrant SKL-SP1. 10 pcs 447

Developer SKD-S2. 10 pcs 447

Information about coated stick electrodes 448Information about coated stick electrodes 448

Coated Stick Electrodes 450Unitor range of maintenance electrodes 450

GPO-302N 453

GPR-300H 454

Special-303N 455

LH-314N 456

LHH-314H 457

LHV-316N 458

LHT-318N 459

LHL-319N 460

LHR-320N 461

18/8-321N 462

23/14-322N 463

Duplex-325N 464

Pickling gel 2 litre for stainless steel 465

Tensile-328N 466

Impact-329S 467

Wearmax-327 468

Abratech-330 469

Nickel-333N 470

NiFe-334N 471

Tinbro-341 3.2x350mm 42 electrodes 1.4kg 472

Albronze-344 3.2x350mm 46 electrodes 1.3kg 472

Alumin-351N 3.2x350mm 82 electrodes 1.1kg 473

CH2-382 3.2x350mm 36 electrodes 1.4kg 474

ACA-384 475

Electrode Storing Cabinets 476Minidryer- 350 capacity 8kg electrodes 476

Heating cabinet - 85 capacity 350kg electrodes 477

Electrode cabinet empty for 27 pcs electrode packages 478

Electrode cabinet complete with 27 pcks of electrodes 479

Arc Welding Wires 481Wire for wire welding 481

TIG Welding Rods and Fluxes 482Rods and fluxes for TIG Welding 482

Cold Repair Polymer Compounds 483Cold repair polymer compounds 483

Polymer kit 484

Leak stop pipe repair tape 485

Metalgrade ready stick 3 pairs of sticks 0.72kg 486

Metalgrade express base and activator 0.25L 486

Metal grade rebuild base and activator 0.5L 487

Metal grade hi - temp heat resistant compound 488

11

Aquagrade rebuild base and activator 0.5L 489

Ceramigrade rebuild base and activator 0.5L 490

Ceramigrade liner base and activator 0.5L 490

Ceramigrade abrashield 5.4kg engineering repair compound 491

Rubbergrade 6 rebuild 3 x 0.143L base/activator 492

Rubbergrade 6 remould 3 x 0.143L base/activator 493

Marine Chemicals 494Cleaning Chemicals 494

Cargo Hold Cleaning 496Aquatuff High Foam 496

Metal Brite HD 497

Slip-Coat 498

Slip-Coat WR 499

Cleaning and Maintenance 500Enviroclean 500

Coldwash HD 501

Cleanbreak 502

Seaclean 503

Seacare O.S.D 504

Seacare Ecosperse 52 505

ACC Plus 506

Air Cooler Cleaner 507

Carbonclean LT 508

Carbon Remover 508

Descalex 509

Descaling Liquid 510

Metal Brite 511

Disclean 511

Deck Clean NP 512

Teak Renewer 512

Aquatuff 513

Aquabreak PX 514

Foam-Agent 515

Multi clean 515

Reefer Cleaner 516

Fore & Aft 517

H.P. Wash 518

Uni-Wash 519

Ultra Sonic Cleaner USC 520

Natural Hand Cleaner 521

Carpet Cleaner 522

UltraCIP 523

Commissioning Cleaner 524

Bilge Water Flocculant 525

Defoamer Concentrate 526

Penetron Plus 527

Electrosolv-E 528

Mud & Silt Remover 528

Tank Cleaning 529Seaclean plus 529

Alkleen Liquid 530

Alkleen Safety Liquid 531

Tankleen Advance 532

Tankleen Bright 532

Unipol 533

Zinc Coat Conditioner 534

Gamazyme Cleaners 535Gamazyme 700FN 535

Gamazyme MSC 536

12

Gamazyme BTC 537

Gamazyme TDS 538

Gamazyme Digestor 539

Gamazyme DPC 540

Gamazyme BOE 541

Gamazyme FC 542

Gamazyme BUB 543

Water Treatment 544Boiler Water Treatment 546

Oxygen Scavenger Plus 546

Oxygen Control 547

Oxygen scavenger 9-035 548

Oxygen scavenger 9-002 548

Oxytreat 549

Cat Sulphite L (CSL) 550

Condensate Control 551

Condensate treatment 9-150 552

Hardness treatment 7208 552

Hardness Control 553

Alkalinity Control 554

BWT liquid plus 555

Boiler Coagulant 556

Autotreat 25 557

Multiplus 558

Liquitreat 559

Combitreat 560

Cooling Water Treatment 561Antifoulant 9-321 561

Rocor NB Liquid 562

Engine water treatment 9-108 563

Nalfleet 2000 564

Dieselguard NB 565

Engine Water Treatment 9-111AL 566

Cooltreat AL 567

Mar-71 568

Bioguard 569

Water Production Treatment 570Vaptreat 25 L 570

Maxi-vap plus 570

Multivap 571

Evaporator defoamer 572

Potable water stabiliser liquid 573

Potable Water Stabiliser 574

RO Scale control 575

RO Bisulphite 575

RO Alkaline cleaner 576

RO Mild acid cleaner 577

RO Surfactant cleaner 577

Ballast tank inhibitor 9-933 578

Aquabrome tablets 578

Pool Clarifier 579

Pool Surface Cleaner 580

Pool and Spa Hardness 581

Spa Defoamer 582

pH Increaser 583

Fuel Oil Treatment 584Distillate Fuel Treatment 586

Biocontrol MAR 71 586

Diesel fuel lubricity improver 587

13

Diesel fuel stabiliser 588

Heavy Fuel Oil Treatment 589Fuelcare 589

Gamabreak 590

Dual Purpose Plus 591

Burnaid 592

Dieselite 593

Valvecare 594

Soot Remover 595

Soot Remover Liquid 596

Test Kits & Equipment 597Nalfleet Water Dosing Equipment 600

Naltrak 1000 CWT dosing system 600

Naltrak 1750 BWT dosing system 601

Naltrak 2000 BWT dosing system 602

Dosing unit for Evaporator Treatment 603

Dosing unit for BWT 604

Sea Water Dosing Unit 605

Nalfleet Water Test KIts 606Spectrapak 309 606

Spectrapak 310 607

Spectrapak 311 608

Spectrapak 312 609

Spectrapak 313 610

Spectrapak 315 611

Motor ship test kit 612

Boiler plus test kit MO380 613

Sulphite drop test 614

Nitrite full kit MO248A 615

pH test strips 2 pack MO319 616

Total hardness titration pack M204 616

Alkalinity titration pack M250 617

Chloride titration pack M251 617

Titration apparatus pack no 1 MO217 618

Titration apparatus pack no 2 MO218 618

Filter pack, 1 cardboard box MO213 619

Ecoscan pH6 meter & electrode MO348 619

Ecoscan conductivity meter MO347 620

Maxidirect photometer 621

Chlorine checkit block 0.2-8 ppm 622

Oxygen full kit 0-40 ppm O2 M341 622

Legionella test kit 623

Potable Water Test Kit 624

Lovibond 2000 comparator 625

Test kit cooltreat AL with CL test 626

Unitor Cleaning and Dosing Equipment 627Fuel Oil Treatment Dosing Unit 627

Automatic Dosing for Soot Remover Liquid 628

Manual Dosing Unit for Soot Remover Liquid 629

Portable Soot Remover Injector 630

Fixed Soot Remover Injector 631

Chemical Cleaning Unit 632

Jet spray unit 10 l ste 633

Jet spray unit 10 l stainless steel 633

Rechargeable sprayer 634

Spray gun 1 l 635

Syphon squeezer 635

Unitor Fuel Oil Test Kits 636Easy Ship Combined Oil Test Kit 636

14

Easy Ship Water in Oil Test Kit 637

TBN Test Kit 638

Compatibility Test Kit 639

Heated Viscosity Meter 640

Density Meter 641

Fuel Oil Test Cabinet 642

Insolubles Test 643

Salt Water Determination Test 643

Bunker Sampler 644

Plastic Storage Cabinet 645

Fire Protection 646Cabinets for Extinguishers and Fire Blankets 652

Cabinet for fire extinguisher 6 to 9 kg 652

Cabinet for Fire Extinguisher 5 to 9 kg 653

Fire Blanket 120 X 180 cm wall-mounted 654

Portable Extinguishers Cartridge Operated 655Powder Extinguisher 12 kg Abc without Bracket - P12p M18 655

Powder Extinguisher 9 kg Abc without Bracket - P9p M18 656

Powder Ext. 6 kg Abc W/O Brkt - P6p M18 657

Water Extinguisher 9 L without Bracket E9 Model E9 658

Foam Extinguisher 9 l without Bracket 659

Metal Fire Extinguisher 9 kg without Bracket - P9fm.M M18 660

Foam Extinguisher 9 l without Bracket Ev Low Tmp.Hi Type E9a1ev Lt Hp 662

Fat Fire Extinguisher 6 L without Bracket Model E6a15 Evf 663

Stored Pressure Extinguishers 664Powder Extinguisher 2 kg Abc W/Spc with Bracket Model Pp2p 664

Dp Extinguisher 3 kg Abc Pp3p Sp without Bracket 665

Co2 Extinguisher 5 kg without Bracket Model U5c 666




Wheeled Extinguishers 670Powder Extinguisher 50 kg Abc P50p Wheeled 670

Extinguisher Co2 20 kg Wheeled 671

Foam Extinguisher 45 l Wheeled Model E45a2 672

Foam Extinguisher 135 l Wheeled Model E135a2 673

CO2 Extinguisher 45 kg Wheeled 674

Powder Extinguisher 25 kg Abc Wheeled P25p Me 675

Co2 Extinguisher 9 kg Wheeled 676

Extinguisher Powder 25 kg Wheeled 677

Spare parts for fire extinguishers 678CO2 Cartridge 60 g for 9 L Water/ Foam E9/E9A1/E9A1EV extinguisher 678

Co2 Cartridge 450 g for foam 45 L Extinguisher 679

CO2 Cartridge 2 kg for 135 l foam Extinguisher 680

CO2 Cartridge 120 g for 6 kg Powder Extinguisher 681

Spare Cartridge 160 g for 6 kg Powder (BC rated) Extinguisher 682

CO2 Cartridge 180 g for 12 kg Powder Extinguisher 683

CO2 cartridge 450 g for 25 kg Powder (ABC or BC rated) Extinguisher 684

CO2 Cartridge 900 g for 50 kg Powder (ABC or BC rated) Extinguisher 685

AFFF Foam Charge 90 ml for 9 L Foam Extinguisher 686

AFFF Foam Charge F/E45a2 2300011-0.9 l 687

AFFF Foam Charge 3 x 0.9 L for 135 L Foam Extinguisher 688

Powder Refill for 6 kg ABC Extinguisher 689


Powder refill for 12 kg ABC Extinguisher 691


Marine bracket with strap for 5 kg CO2 Extinguisher 693

Universal Bracket For P6/P6p/P9p/ P12/P12p/E9/E9a1 693

Marine Bracket With Strap For Pp6p 694

15

Marine Bracket With Strap For PP9P 694

Extinguisher Bracket with Strap for 12 kg Stored pressure 695

Fire Couplings 696Norwegian coupling 696

Storz Coupling 697

Instantaneous coupling 698

Fire Hoses 699Martex Fire hose 699

Guardman fire hose 700

Mertex fire hose 701

Clamping device for binding machine 702

Binding Machine Portable 702

Fire Hydrants 703Hydrant Valve 703

International Ship to Shore connection 704

Fire Nozzles 705Fire nozzles 705

Foam Concentrates 706Foam concentrates 706

Smoke and Heat Detector Test Equipment 708Smoke and Heat Detector testing 708

Personal Safety 710Breathing Air Compressors 712

Breathing Air Compressors 712

Junior II-E Air Compressor 713

Oceanus E Air Compressor 714

Breathing Air Compressors B Timer 715

Compressor Filter charge for Junior/Oceanus TRIPLEX filter 716

Bauer Compressor Filling Hose 50 m Dn6, Pn450 717

Compressor 300-200 bar change over device 718

Change over Device from 200-300 bar Compl For Bauer Compressor 718

Compressor Breathing Air Quality Test Kit 719

Filter Masks / Breathing Filters 720Breathing Filter Masks 720

ADVANTAGE 3121 Single Filter Threaded Med. 721

Breathing Masks Filter Range 722

Compressed Air Breathing Apparatus 723Self Contained Breathing Apparatus 723

Emergency Escape Breathing Device 724Uniscape EEBD 724

Chemical Protection 726Chemical Suits 726

Chemical Resistant Personal Protection Kit 727

Trellchem Super T-ET 728

Trellchem Light T 729

Trellchem VPS T-ET 730

Trellchem Splash 600 suit without boots 731

Unipack hose for Chemical suits Super/VPS/Light suit only connection 732

Unipack hose for Chemical suits Super/VPS/Light suit and rescue mask connections 732

Chemical Suit Safety Boots 733

Trellchem Chemical suit Hood for Facemask & BA set 734

Trellchem Chemical suit mini hood 734

Gloves, viton/butyl for Trellchem VPS & Super 735

Gloves PVC for Trellchem light and splash 736

Chemical Suit Repair kits 737

Molykote grease f/O-ring bayonet system 738

Head Protection 739Head Protection 739

Head Protection Accessories 740

16

Hearing Protection 741Hearing Protection 741

Personal Fire Protection 742Unitor Flameguard Plus firefighter suit kit 742

Unitor Flameguard Solas firefighter suit 743

Unitor Firebuddy plus firefighter suit kit 744

Firemans Helmet - PAB HT04 745

Led lamp for fireman helmet PAB 746

Cabinet for Fire fighters outfit 747

Fire axe with insulated handle 2 kV 748

Cover for Fire Axe 748

Gloves for Firebuddy Plus Firefighter suit 749

Firefighters suit insulated gloves 750

Solas Firefighter Boots 751

Firefighter Boots - MED Approved 752

Firefighter Lifeline 753

Portable Gas Detection 754Oxy, Toxi & Gas-mate 754

Combi-Mate 755

Combi-Mate 3 757

Tank-Mate 758

Aspirator hose 10 m for use with Unitor Gas detectors 759

Aspirator hose 20 m for use with Unitor Gas detectors 759

Aspirator probe 1 m fixed for gas detection 760

Aspirator Probe, Telescopic - 1 m 760

Aspirator assembly Single Gas Monitor 761

Aspirator assembly non-pumped Unitor Combi-Mate gas detector 761

Aspirator Assembly for Unitor Combi-mate 3 gas detector 762

Watertrap for use with gas detection aspirator tube 762

Gas-Test Kit, for Unitor Combi-Mate pumped unit without gas cylinder 763

Gas test kit for Combi-mate 3 763

Carry Case for Oxy, Toxi & Gas-mate Single Gas portable gas detector 764

Carry Case for Unitor Combi-Mate portable gas detector 764

Chest harness kit for Unitor Combi-Mate gas detector 765

Carry Case for Unitor Combi-mate 3 portable gas detector 765

Carry case and belt for Unitor Tank-mate gas detector 766

Harness Belt and Fall Arrestor 767Fall Arrest devices 767

Life Saving 768Cabinets 770

Cabinets 770

Hydrostatic Release Units 771Hydrostatic Release Unit Hammar H20 for liferafts 2 year 771

Hydrostatic Release Unit DK2004 for liferafts 4 Year 772

Immersion Suits 773Immersion Suits 773

Rescue suit 774

Life Jackets and Lights 775Lifejacket Ancillaries 775

Inflatable Lifejackets 776

Unitor Seaguard Lifejackets 777

Lifebuoys, bracket, lines and light 778Lifebuoys and Ancillaries 778

Lifebuoy Lights 779

Lifeboat Air Cylinders 781Lifeboat cylinders 781

Liferafts 782Liferaft Rental 782

Throwoverboard Liferafts 784

17

Davit Launch Liferafts 786

Pyrotechnics 788Pyrotechnics 788

Rescue Equipment 789Rescue Equipment 789

Stretchers 790Neil Robertson Stretcher 790

Paramedic Stretcher and Rescue Unit 791

IMO Embarkation station/Lifeboat signs 792IMO Lifeboat Signs 792

IMO Escape Way guidance signs 793Escape way and guidance signs 793

IMO Fire fighting Equipment & System signs 794Fire Equipment signs 794

IMO First Aid & Safety Equipment signs 795First Aid and Medical Equipment signs 795

IMO Hazard signs 796IMO Hazard Signs 796

IMO LSA Signs 798IMO Lifesaving Appliance Signs 798

IMO Muster/Assembly station signs 800Muster and Assembly station signs 800

IMO Personal Protective Equipment signs 802Personal protective equipment Signs 802

IMO Prohibition signs 803IMO Prohibition Signs 803

IMO Security Instruction signs 804IMO Security instruction Signs 804

IMO SOLAS tape 805Retroreflective tape 805

Medical 806Defibrillators 808

Defibrillator Heartstart Frx including Pads And Softcase 808

Medical Oxygen Systems 809Med Ox system IMO, Outside Excl mox-40 cylinder 809

Med Ox system. IMO Bedside Excl mox-40 cylinder 810

Med Ox System IMO, Norwegian type Excl mox-40 cylinder 811

Medical Oxygen Resuscitators 812Oxygen resuscitator without cylinder 812

Medical Suction Unit 813

Environmental 814Oil spill products 816

Oil spill Kits 816

Oil spill care and maintenance tools 817

Oil spill kit spare storage box 818

Oil spill kit spare 1000 l waste bag 818

Sorbents & Booms 819Spill Kit Sorbent Pads 819

Sorbent Rolls 820

Sorbent particulate U94 821

Sorbent sweep U941800 822

Sorbent Pillows 823

Sorbent Booms 824

WTS Safety Systems 826Maritime Logistics 852Ships Agency 854Terms and conditions 858

18

20 20

21

All products listed in this product catalogue form our standard product offer. The full product range will always be available through our online product catalogue at wilhelmsen.com/shipsservice, or wssproducts.wilhelmsen.com. Here you will find the most up-to-date information, approvals, user instructions and further technical details.

Please be assured, we will always do our utmost to meet your request and take pride in fulfilling your ship’s order requirements.

Our extensive product portfolio, which includes some of the industry’s most trusted and respected brands – Unitor, Nalfleet and Unicool – is aligned to meet all your needs and with global standardisation.

You can rely on the same quality, every time, everywhere.

WILHELMSEN SHIPS SERVICE PRODUCT CATALOGUE

21

22

Our maritime solutions keep your vessels working safely and effectively.

OUR GLOBAL NETWORK

Wilhelmsen Ships Service is part of Wilhelmsen Maritime Services, a Wilh. Wilhelmsen group company. We have the world’s largest maritime services network, servicing 2,400 ports in 125 countries.

Our company’s focus is to ensure that vessels operate smoothly at sea and reduce turnaround time in port. Our customer services provide peace of mind through 24/7 accessibility, personal service and local knowledge.

WSS supplies maritime products and services, specialising in Safety products, Marine products, Marine chemicals, Maritime logistics and Ships Agency services.

WILHELMSEN SHIPS SERVICEPRODUCT CATALOGUE

Expertise and know-how to keep your fleet at maximum efficiency.

OUR OFFER

MARINE PRODUCTSWe know that maintenance and repairs are vital for optimising the performance of your vessel and keeping your fleet on the move. Unitor products offer more than standardised quality delivered with reliable service. Behind our extensive portfolio of Unitor welding equipment, Unitor fire, rescue and safety (FRS) equipment, consumables, spares and gases lies more than 100 years of marine history and expertise. With more than 120,000 refillable refrigerant cylinders constantly in circulation worldwide, we are also a leading industry supplier of Unicool refrigerants. The Unitor portfolio provides constant care for your vessel – because protecting your assets pays off in the long run.

MARINE CHEMICALSBy combining an extensive portfolio of Nalfleet and Unitor chemicals with enhanced service, we deliver tailored solutions for your chemical needs. The chemical products are all made to ISO 9001 and 14001 standards with a constant focus on health, safety and environmental considerations. We offer an extensive chemical portfolio including Unitor cleaning and maintenance chemicals, fuel oil treatment and Nalfleet water treatment chemicals and test kits. All products are tested for reliability in the tough marine environment. With our experienced chemical teams we offer specialised services and solutions for better chemical management on board.


24

SAFETY PRODUCTS AND SERVICESThe only rule in maritime regulations is constant change. We know that safety matters and that is why we’ve built a worldwide network of regulatory know-how designed to keep your fleet compliant and on the move. We deliver fire, rescue and safety services with our high quality Unitor products for fire protection, personal safety, life saving, medical and environmental solutions. In addition we offer safety inspection services worldwide. So, wherever you are, whatever your business, we have the safety solutions you need to run your vessels with maximum efficiency. With us as your compliance partner, you can keep your fleet moving without compromise.

MARITIME LOGISTICSEvery day 24/7, we’re a connection force in keeping your business on the move with our freight forwarding and project based logistics for complex and heavy cargo. We provide commercial and operational services in local markets around the world, including a broad range of capabilities extending beyond traditional ship agency and a comprehensive logistics support package. Capitalising on our international maritime network across the Wilh.Wilhelmsen Group, we offer you global reach with local experts on duty in 80 countries. Together we provide customized end-to-end solutions based on air, sea and land transport – a complete connection taking your cargo from A to B.

SHIPS AGENCYWe offer husbandry, full agency, HUB and protective agency. As a trusted extension of your team we are a connecting force in simplifying your port operations. Therefore, we have re-defined the way ships agents handle port calls, by standardising procedures to ensure that you receive consistent service in all 2,400 ports where we operate. We are constantly working to offer you better global coordination to better serve your global business. We believe total port call solutions give streamlined operations, improved cash management, enhanced documentation and communication flow making your operations more efficient.

25

Health, safety and environment.WILHELMSEN

SHIPS SERVICEPRODUCT CATALOGUE

26

PRODUCT LABELS AND SDSWilhelmsen Ships Service has a full range of effective and sustainable chemicals for use on board ships.

To avoid injury, it is vital for ships staff who handle and use chemical related products to understand the hazardous properties of the product they are using, how it should be used, which protective measures are appropriate and what to do in case of an accident. To assist the users on board, our marine chemicals include a unique product labelling system on every pail or drum of product delivered.

Each label includes:

Multi-lingual risk and safety phrases with pictograms indicating hazardous properties

Specific information on transportation classification

Emergency telephone numbers (manned 24 hours a day)

Addresses of Wilhelmsen Ships Service’s major chemical offices

Complete product description, directions for use and dose rates

Colour coded borders for easy identification

Complete Safety Data Sheets (SDS)

Safety Data Sheets for all Unitor and Nalfleet chemical products are downloadable in PDF format from Wilhelmsen Ships Service’s web site: wilhelmsen.com/shipsservice

SDS LANGUAGESSDS’s are available in 23 different languages:

Bulgarian, Chinese (simplified and traditional), Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Italian, Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish and Turkish.

All chemicals and gases can be dangerous to both people and the environment if used incorrectly. It is strongly recommended to follow all safety and handling instructions for all chemical products.

27

BRAZIL Telephone daytime: (+55) 21 25828000Telephone after hours: (+55) 21 81622731/32 Fax: (+55) 21 25828001E-mail: [email protected]

CHILE Telephone daytime: (+55) 21 25828000Telephone after hours: (+55) 21 81622731/32 Fax: (+55) 21 25828001E-mail: [email protected]

CHINA Telephone daytime (+86) 21 6086 3800Telephone after hours (+86) 138 188 7605Fax (+86) 21 6086 3811Email: [email protected]

CYPRUS Telephone Daytime (+357) 25 344696Telephone After hours (+357) 99 533558Fax (+357) 25 356478Email: [email protected]

DENMARK Telephone Daytime (+45) 36 77 36 13Telephone After hours (+45) 36 77 36 13Fax (+45) 36 49 35 62Email: [email protected]

EGYPT Telephone Daytime (+20) 3 485 6094Telephone After hours (+20) 123 129 993Fax (+20) 3 485 6094Email: [email protected]

FINLAND Telephone Daytime (+358) 96 80 36 40Telephone After hours (+358) 50 59 31 114Fax (+358) 96 82 08 60Email: [email protected]

GERMANY Telephone Daytime (+49) 42 8293130Telephone After hours (+49) 42 8293130Fax (+49) 42 82593153Email: [email protected]

GREECE Telephone Daytime (+30) 210 4239100Telephone After hours (+30) 6946 063860Fax (+30) 210 4212480Email: [email protected]

HONG KONG Telephone Daytime (+852) 2880 1688Telephone After hours (+852) 6395 7488 / 6392 7748 / 9331 1764Fax (+852) 2856 1559Email: [email protected]

INDIA Telephone Daytime (+91) 22 663 75 500Telephone After hours (+91) 99 872 62 461Fax (+91) 22 434 15 580/581Email: [email protected]

ITALY Telephone Daytime (+39) 010 6142101Telephone After hours (+39) 335 7539245Fax (+39) 010 6142196Email: [email protected]

JAPAN Telephone Daytime (+81) 45 775 0011Telephone After hours (+81) 45 775 0012Fax (+81) 45 775 0070Email: [email protected]

KOREA Telephone Daytime (+82) 51 728 4900Telephone After hours (+82) 10 2568 0089Fax (+82) 51 728 3918Email: [email protected]

LATVIA Telephone Daytime (+371) 67321115Telephone After hours (+371) 29108244Fax (+371) 67321125Email: [email protected]

NETHERLANDS Telephone Daytime (+31) 10 4877 920Telephone After hours (+31) 62 0420 248Fax (+31) 10 4949 303Email: [email protected]

NORTH AMERICA Telephone Daytime Toll-free: (+1) 866 266 9371Officephone: (+1) 281 291 0333Telephone After hours (+1) 281 685 5022Tollfreefax: (+)1 866 266 9372Localfax: (+1) 281 291 0888Email: [email protected]

OUR CUSTOMER SERVICES


28

NORWAYTelephone Daytime (+47) 22 13 14 15Telephone After hours (+47) 91 37 43 02Fax (+47) 22 13 45 05Email: [email protected]

POLANDTelephone Daytime (+48) 91 8813 211Telephone After hours (+48) 728993992Fax (+48) 91 8813 201Email: [email protected]

RUSSIA (MURMANSK) Telephone Daytime (+7) 8152 458496Telephone After hours (+7) 921 171 9448Fax (+7) 8152 452314Email: [email protected]

RUSSIA (ST. PETERSBURG)Telephone Daytime (+7) 8127 030273Telephone After hours (+7) 8129 348803Fax (+7) 8127 030274Email: [email protected]

RUSSIA (VLADIVOSTOK) Telephone Daytime (+7) 4232 300659Telephone After hours +7 914 707 15 44Fax (+7) 4233 402255Email: [email protected]

SINGAPORETelephone Daytime (+65) 6395 4907Telephone After hours (+65) 9669 7017Fax (+65) 6872 6319Email: [email protected]

SOUTH AFRICA (DURBAN)Telephone daytime: (+27) 31 274 3200Telephone after hours: (+27) 76 759 4970Local Fax: (+27) 31 205 8041E-mail: [email protected]

TAIWANTelephone Daytime (+886) 2 2502 5222 Ext 334 Telephone After hours (+886) 9 3215 6847Fax (+886) 2 2509 5733Email: [email protected]

TURKEYTelephone Daytime (+90) 216 681 3333Telephone After hours (+90) 530 413 7180Fax (+90) 216 425 5463Email: [email protected]

UKRAINE Telephone Daytime (+380) 482 366 608/9Telephone After hours (+380) 675 198 681 (+380) 503 909 095 Fax (+380) 482 366 609Email: [email protected]

UNITED ARAB EMIRATES Telephone Daytime (+971) 4 382 3900Telephone After hours (+971) 50 552 3604Fax (+971) 4 395 1155Email: [email protected]

UNITED KINGDOM Telephone Daytime (+44) 1322 282 400 Telephone After hours (+44) 7710 919 601 Fax (+44) 1322 620 660Email: [email protected]

Please visit the Network Directory on our website for a complete list of contact details per country, port and service offer: wilhelmsen.com/shipsservice

Given our global network serving 2,400 ports of various size and trade pattern, some products may not be immediately available at every service location. Our Customer Services will be able to answer any questions regarding availability or lead time for our product range.

29

�� !" "# !$�� %��& �'��&��$�(��)�'*

�� !" "# !$�� %��& �'��&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING

AIR TOOLSWORKSHOP EQUIPMENT

CLEANING EQUIPMENTGASES, REFRIGERANTS AND CYLINDERS

REFRIGERATION EQUIPMENTWELDING

PUMPS

In order for a vessel to keep moving, it needs to have several types of fluid in operation across a range of machinery and systems for the purpose of cooling, heating, lubrication and fuel.

WSS offers a complete range of pumps, levers and applicators, including barrel pumps, chemical applicators and grease pumps - all designed to be fully compatible with onboard pumping systems and effectively and environmentally efficiently. As standard, these products are available with all relevant accessories and spares and backed up by WSS’s global network of service technicians.

MAMARRINE PINE PRROODDUUCCTTSS Pumps

Barrel Pumps

CCHEHEMICMICAAL PL PUUMP LMP LEEVVEER TR TYYPPEE

422 637447

The hand pump is a simple and cost effective

method of moving small and medium quantities

of liquid from a 200 litre barrel, 60 litre drum or a

25 litre pail (requires an adaptor). The pump is

easy to mount and use and capable of pumping

solvents and chemicals compatible with Viton

and PTFE seals. The pumps moves 0,33 litre

per stroke.

Chemical pump lever type (set of 2 pumps).

Features

• Fast and simple liquid transfer

• Flexible

Benefits

• Cost effective

• Ideal for smaller quantities of liquid

• No electrical parts

Accessories

Product number Product name

655514 CONNECTION FOR HAND PUMP F/25L PAIL

32


Barrel Pumps

1:1:1 O1 OIL PIL PUUMP WMP WITITH SH SPPOOUUTT

422 711291

Suitable for transfer applications of low viscosity

fluids, diesel, and nonaggressive fluids for short

distances without reels. Needle valve for

regulating pump speed is included. Designed

for quiet and reliable operation for 200 litre

drums, spout and needle valve for flow control

supplied. Wetted materials: steel, zink and

aluminium.

Features

• High flow, low pressure

Benefits

• Handles most light to medium viscosity fluids

Technical data

Flow capacity/min (20 °C water, 10 bar) 40 L

Air consumption 0.7 m3/min

Min air pressure 3 bar

33


Barrel Pumps

2:2:1 C1 CHEHEMICMICAAL PL PUUMP SMP SSSTT316316

422 718890

2:1 chemical pump in 316 stainless steel is

made up of two main parts: a compressed air

operated two-way piston air pump and a

double-acting liquid pump.

Features

• Efficient fluid transfer

Benefits

• Reliable air-operated unit

Technical data

Max operating pressure 10 bar

Flow capacity, max 30 L/min


The Unitor 2:1 pump in 316 stainless steel is designed to

move a broad spectrum of fluids compatible with AISI 316,

Viton and PFTE seals. It may NOT be used for other

purposes or for pumping gasoline, or other explosive liquids.

The unit is designed for 200 litre drums; a spout and needle

for flow control are supplied. Maximum permitted air

pressure is 10 bar and this limit should NOT be exceeded.

34


Chemical Applicators

10:10:1 HY1 HYDDRRA CA CLLEEAAN CN CHEHEMICMICAAL AL APPPPLLICICAATTOORR

421 625293

The Unitor 10:1 Hydra-Clean chemical pump is

ideal for a majority of fluid handling tasks on

board. Delivered ready to use and includes

strainer, hoses, spray gun and nozzle. Pumps

are designed to be mounted on an open 200

litre/55 gallon drum by use of a mounting

bracket and flexible suction hose also allows for

other installations.

Features

• Supplied ready for use including lubricator, hoses,

spray gun and nozzle

• Stainless steel construction (AISI 304) with chemical

resistant packings

• Can be used with cold or hot water up to 95 °C

Benefits

• Fits all open head universal drums

• Air driven motors enable use in explosion classified areas

Technical data

Max working pressure 75 bar

Flowrate, normal 11.4 l/h


With correct accessories this unit can apply chemicals

vertically up to 12 m. Ideal for applying chemicals and

detergents onto surface, washing down, general transfer of

fluids and chemical injection into pressurised systems, e.g

tank cleaning systems.

Application areas

• Applying chemicals and detergent onto surface

• Washing down

• General transfer of fluids

• Injection of chemicals into pressurised system, e.g.

tank cleaning systems

Accessories


659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE

Spare parts available for purchase:

625343 REPAIR KIT, LOWER PUMP

588434 REPAIR KIT FOR AIR MOTOR

Supplied with: Air lubricator, flexible suction hose, fluid

intake filter, spray gun, nozzle, hose, fluid accumulator and

pump mounting bracket.

35


Chemical Applicators

2:2:1 C1 CHEHEMICMICAAL AL APPPPLLICICAATTOORR

422 718700

The Unitor 2:1 chemical pump is ideal for use

when applying cleaning chemicals before

washing with high pressure or the Unitor

cleaning jet.

Features

• Fits in any standard 200 litre drum

• Supplied ready for use

• Pre-lubricated air motor, has no need for an air

lubricator

Benefits

• Very low noise emission enables use onboard cruise

or passenger vessels

Technical data

Weight 15.8 kg

Pressure 20 bar

Connection size/type 1/4''

Flowrate, normal 600 l/h


This unit has been developed as an easy to use and

economical alternative to the 10:1 Hydra Clean and is

supplied ready to use with a hose, gun and drum fittings.

The unit is designed to be mounted in a 200 litre/55 gallon

drum. With the correct accessories this unit can apply

chemicals vertically up to 10 m.

Accessories



36


Double Diaphragm Pumps

DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 30MP 307 P7 POOLLYYPPRROOPPYYLLEENENE

422 604918

Designed to operate at low air pressure while

delivering a smooth, reliable flow. Model 307

pumps are ideal for transferring a wide variety of

fluids.

Features

• Easy maintenance

• Fluid compatibility

• Unique, patented air valves

• Precision-fitted parts

Benefits

• Quick priming and immediate flow of product

• Handles fluid viscosities up to 5000 cps and solids up to 0.09 in (2.29 mm)

• Excellent for abrasive, low-to-medium viscosity fluids and shear sensitive materials

Technical data

Flow capacity max 24.6 l/min

Suction height 2.1 m (dry) 3.7 m (wet)

Material Polypropylene

Fluid inlet and outlet size 3/8"

Weight 2.2 kg

This pump is designed to operate at low air pressure while

delivering a smooth, reliable flow. Model 307 pumps are

ideal for transferring a wide variety of fluids. The air motor

body is contructed of polypropylene and stainless steel to

resist external corrosion. This polypropylene wetted

construction model is with Teflon diaphragms and ball

checks, suitable for most chemicals including acids and

caustic fluids.

Typical applications

• Sampling and testing

• Drum transfer for fluids up to 1000 centipoise

• Circulation of low viscosity inks, detergents and

chemicals

• Fluid circulation and evacuation

• Waste fluid removal

• On-demand batch chemical metering

• Low viscosity adhesive supply

• Consistent low pressure process fluid supply

Typical fluids handled by this pump:

• Acids: hydrochloric, sulphuric, phosphoric

• Bleach: sodium hypochlorite (<12%)

• Base: sodium hydroxide, ammonia, hydrogen

peroxide, potassium hydroxide

Accessories


607830 STAINLESS NIPPLE F/307

607832 FLUID SECTION REPAIR KIT F/MOD. 307

607833 AIR VALVE KIT

37

DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 515 PMP 515 POOLLYYPPRROOPPYYLLEENENE

422 634787

Features





Benefits


• Handles fluid viscosities up to 5000 cps and solids

up to 0.09" (2.29 mm)

• Excellent for abrasive, low-to-medium viscosity fluids

and shear sensitive materials

Technical data

Flow capacity, max 57 l/min

Suction height 7.6 m


Connection size/type 1/2"

Weight 2.9 kg

Both models Husky 515 and 716 are based on the same air

motor and fluid section, the only difference being the inlet

and outlet connections. The 515 has 1/2” suction and

discharge ports where the 716 has 3/4” suction and

discharge ports. The pumps are well suited for a variety of

utility duties requiring up to 60 L/min (15 gal/min) with light to

medium viscosity fluids. The polypropylene or stainless steel

body make them ideal for handling chemicals, cleaning fluids

and for water treatment applications. The 515/716 are small,

easy to carry, and together with the drum suction kit (fits

both 515/716 models) they are ideal to mount on top of a 60

(16 gal) or 200 l (55 gal) pail. Both models are fitted with

Teflon and stainless steel diaphragms/balls/seats for

maximum chemical compatibility, including acids and

caustics.



• General purpose

• Handles acids and caustics

• Medium abrasion resistance

• Not recommended for strong thinners

• Drum transfer of low to medium viscosity fluids



• Acids: hydrochloric, sulphuric, phosphoric

Bleach: sodium hypochlorite (<12%)

Base: sodium hydroxide, ammonia, hydrogen


• Thinners: alcohol, tri, ketones, acetone,

dichlorobenzene, toluene

Accessories



634795 SERVICE KIT F. 515/716

634811 AIR VALVE REP KIT

634819 DRUM SUCT. KIT F.515/716

729459 HOSE NIPPLES FOR 515 PUMP

38

DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 7MP 716 S16 STTAAINLINLEESSS SS STTEEEELL

422 634803

Features





Benefits



up to 0.09" (2.29 mm)

• Excellent for abrasive, low to medium viscosity fluids


Technical data



Material Stainless steel


Weight 8.2 kg

Both models Husky 515 and 716 are based on the same air

motor and fluid section, the only difference being the inlet

and outlet connections. The 515 has 1/2”suction and

discharge ports where the 716 has 3/4” suction and

discharge ports. The pumps are well suited for a variety of

utility duties requiring up to 60 L/min (15 gal/min) with light to

medium viscosity fluids. The polypropylene or stainless steel

body make them ideal for handling chemicals, cleaning fluids

and for water treatment applications. The 515/716 are small,

easy to carry, and together with the drum suction kit (fits

both 515/716 models) they are ideal to mount on top of a 60

L (16 gal) or 200 L (55 gal) pail. Both models are fitted with

Teflon and stainless steel diaphragms/balls/seats for

maximum chemical compatibility, including acids and

caustics.



• General purpose

• Excellent abrasion resistance

• Handles acids and caustics

• Good with thinners

• Drum transfer of low to medium viscosity fluids



• Acids: nitric, cresyllic

• Bleach: perchloroethylene

• Base: caustic soda, sodium hydroxide (<12%),

ammonia (except ammonium), potassium hydroxide

• Thinners: alcohol, tri, ketones, acetone,

dichlorobenzene, toluene

Accessories


634819 DRUM SUCT. KIT F.515/716


634795 SERVICE KIT F. 515/716


39



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 1050MP 1050PPOOLLYYPPRROOPPLLYYLLEENENE

422 777992

The polypropylene diaphragm pump is built with the highest quality precision parts. Long-lasting even

when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump

because it offers an easy, hands-off solution to your fluid handling needs.

Features





Benefits


• Handles fluid viscosities up to 5000 cps and solids up to 0.09" (2.29 mm)


Technical data




Connection size/type 1"

Weight 8.2 kg

The 1" (25.4 mm) Husky 1050 double diaphragm pump

features a stall-free, low pulsation air valve which provides a

smooth and rapid changeover. Available in aluminum,

polypropylene, conductive polypropylene, PVDF, stainless

steel and hastelloy fluid sections.

20% increase in fluid flow compared to the Husky 1040.

40



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 1050 AMP 1050 ALLUUMINIUMINIUMM

422 777990

The diaphragm pump is built with the highest

quality precision parts. Long-lasting even when

used with abrasive fluids making this pump very

cost effective. Professionals turn to this pump

because it offers an easy, hands-off solution to

your fluid handling needs.

Features





Benefits



• Excellent for abrasive, low to medium viscosity fluids and shear sensitive materials

Technical data

Flow Capacity, max 189 l/min

Suction height 8,8 m

Weight 10,5 kg








41



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 1050 SMP 1050 STTAAINLINLEESSS SS STTEEEELL

422 777991

The stainless steel diaphragm pump is built with

the highest quality precision parts. Long-lasting

even when used with abrasive fluids making this

product very cost effective. Professionals turn to

this pump because it offers an easy, hands-off

solution to your fluid handling needs.

Features





Benefits




Technical data

Flow Capacity, max 189 l/min

Suction Height 8,8 m


Weight 16,9 kg







42



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 15MP 1590 P90 POOLLYYPPRROOPPYYLLEENENE

422 718643

Features





Benefits



up to 0.09" (2.29 mm)



Technical data




Connection size/type 1 1/2"

Weight 16 kg

This is the highest capacity double diaphragm pump in its

price class. With all the same durable features of the smaller

model, the 1590 has 1.5" npt ports that can take on the

heavier, more viscous materials and pump them faster with

greater tolerance for suspended solids. Model 1590 has an

air valve system that is 100% servicable without disassembly

of the wetted parts, saving valuable maintenance time. This

pump requires no air line lubrication, which also saves

money.

• Highest reliability air valves for stall-free operation

• No-lube air valves reduce routine maintenance

• High flow design with complete range of diaphragm

options

• Rugged construction for long, trouble-free

perfomance

• Ideal for spill response and all types of transfer

applications


• Acids: hydrochloric sulphuric, phosphoric

• Bleach: sodium hypochlorite (<12%)

• Base: sodium hydroxide, ammonia, hydrogen


Accessories


718650 HOSE FLANGE FOR 1590 POLYPROPYLENE

742916 SUCTION HOSE FOR 1590


43



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 15MP 1590 A90 ALLUUMINIUMINIUMM

422 718635

Features





Benefits



up to 0.09" (2.29 mm)



Technical data

Flow capacity, max 378.5 l/min


Material Aluminium

Size 1 1/2"

Weight 15.2 kg

This is the highest capacity double diaphragm pump in its

price class. With all the same durable features of the smaller

model, the 1590 has 1.5" npt ports that can take on the

heavier, more viscous materials and pump them faster with

greater tolerance for suspended solids. Model 1590 has an

air valve system that is 100% servicable without disassembly

of the wetted parts, saving valuable maintenance time. This

pump requires no air line lubrication, which also saves

money.




options


perfomance


applications


• Oil: light oil, gear oil, mineral oil

• Fuel: diesel, leaded petrol/gasoline, fuel oil

• Other: seawater/brine, general waste water, white

spirit, alcohol

Accessories


742916 SUCTION HOSE FOR 1590


44



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 2150 AMP 2150 ALLUUMINIUMINIUMM

422 604926

Features


• Fluid compatiability



Benefits



up to 0.09" (2.29 mm)



Technical data



Material Aluminium

Weight 26.3 kg

This is the highest capacity 1" and 2" double diaphragm

pump in its price class. With all the same durable features of

the smaller model, the 2150 has 2" npt ports that can take

on the heavier, more viscous materials and pump them

faster with greater tolerance for suspended solids. Model

1050, 1590 and 2150 has an air valve system that is 100%

servicable without disassembly of the wetted parts, saving

valuable maintenance time. This pump requires no air line

lubrication, which also saves money.




options


perfomance


applications

Model 1050 is a 1", 1590 is 1.5" double diaphragm pump

for similar applications. See 'Technical data' for more

information.





spirit, alcohol

Accessories



607817 SUCTION HOSE 2 IN 5 MTR


607835 FLUID KIT F/MOD 2150 ALUM

45



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 2150 SMP 2150 STTAAINLINLEESSS SS STTEEEELL

422 607747

Features





Benefits



up to 0.09" (2.29 mm)



Technical data



Material Stainless steel


Weight 50 kg

This is the highest capacity 1" and 2" double diaphragm

pump in its price class. With all the same durable features of

the smaller model, the 2150 has 2" npt ports that can take

on the heavier, more viscous materials and pump them

faster with greater tolerance for suspended solids. Model

1050, 1590 and 2150 has an air valve system that is 100%

servicable without disassembly of the wetted parts, saving

valuable maintenance time. This pump requires no air line

lubrication, which also saves money.




options


perfomance


applications

Model 1050 is a 1", 1590 is 1.5" double diaphragm pump

for similar applications. See 'Technical data' for more

information.

Accessories


607817 SUCTION HOSE 2 IN 5 MTR


618884 FLUID KIT FOR SST 2150

607834 AIR VALVE SEAL KIT


46



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP 32MP 32775 A5 ALLUUMINIUMINIUMM

422 634851

Features




• Precision-fitted Parts

Benefits



• Excellent for abrasive, low to medium viscosity fluids and shear sensitive materials

Technical data



Material Aluminium

Size 3"

Weight 68 kg

This is the biggest double diaphragm pump in the Unitor

line-up. The 3” ports deliver up to 1041 L/min (275 gal/min)

and the pump can be operated on air pressures from 1.4 to

8.4 bar. The heavy duty aluminium construction handles

viscosities up to 25,000 centipoise and tolerates particle

sizes up to 10 mm. It has the same trouble free air valve

design that has made the 1040 and 2150 models so

popular and is the best guarantee for unwanted hang-ups.



• Applications requiring up to 1041 L/min (275 gal/min)

fluid flow

• Transfer of sea water/brine

• Transfer of sewage, waste water and slurry

• Emptying of large tanks





spirit, alcohol

Accessories


634907 HOSE FLANGE F/3275, CST


634859 SERVICE KIT F/ALUM. 3275


47



DDOOUUBBLLE DE DIAIAPPHRHRAAGGM PM PUUMP AMP ACCCCEESSSSOORRIEIESS

Accessories


607832 FLUID SECTION REPAIR KIT F/MOD. 307

634795 SERVICE KIT F. 515/716

617738 FLUID KIT F/1040 SST + POLY

617712 FLUID KIT F/MOD 1040 ALIUM

607835 FLUID KIT F/MOD 2150 ALUM

618884 FLUID KIT FOR SST 2150

634859 SERVICE KIT F/ALUM. 3275

Air valve seal kits for diaphragm pumps:

607833 AIR VALVE KIT


607834 AIR VALVE SEAL KIT


48


Grease Pumps

GGRREEAASSE PE PUUMP 50:MP 50:1, F1, FOOR 50 KR 50 KG DG DRRUUMSMS

422 711309

The 50:1 grease pump is recommended in mobile pump equipment and small systems with 1-2

outlets.

Features

• For greases with viscosity up to NLGI 3

Benefits

• Fast grease transfer, saving time

• Fits several sized drums

Technical data

Hose length 6 m


Ratio 50:1

The Unitor 50:1 grease pump series features a unique air

motor that enables quiet and reliable operations as well as

quick serviceability.

The pumps are recommended for mobile units and piped

installations of moderate length, and are designed to

dispense greases with a viscosity up to NLGI 3.

The pump package includes a 2" bunge adapter for

mounting the pump on top of the drum cover as well as a

hose and applicator gun. The 50 kg unit is, in addition,

supplied with a trolley for easy transport of the heavy grease

drums.

The units are based on the same parts and all parts except

one are interchangeable. This enables a reduction in spare

part stocks and makes it easier to have two sizes of pumps

on board.

Accessories


635267 5 GAL. ADAPTOR F. CART

635259 CART F/GREASE PUMP

655605 GREASE HOSE 1/4", 6M

655639 HOSE FLEXIBLE FOR GREASEGUN 45CM

655621 UNION 1/4" MALE X 1/4" MALE

49

MAMARRINE PINE PRROODDUUCCTTSS Accessories & Spares

Chemical Applicators Accessories & Spares

HP EHP EXXTTEENDNDAABBLLE LE LAANCNCE 5.E 5.5 M5 M

436 659151

Features

• 3 telescopic tubes reach up to 5.5 m

The Unitor 5.5 m lance has been developed in order to

enable chemical application above the normal reach of any

standard pump. The lance has 3 telescopic tubes which,

when extended, slide out to a full length of 5.5 m. Inside the

sliding tubes the fluid is transported using a 3/8" hose which

starts at the trigger and exits at the end of the lance in a

quick connector. The quick connector enables rapid

changing of the nozzle according to the task at hand- 25 for

high volume or 0 for spot cleaning. The lance can be used

with both the 10:1 and the smaller 2:1 chemical pumps as

well as the high pressure cleaners.

Typical set up

Pump > Hose quick connector M & F > Heavy duty hose >

Hose quick connector F & M > 5.5 m lance > 25 nozzle

Accessories


Nozzles:

718627 NOZZLE 03/25DGR. F/EXTENDABLE LANCE


Hoses:

586776 HEAVY DUTY HOSE 10 MTR



546036 COUPLING KIT ERGO 3000

50

MAMARRINE PINE PRROODDUUCCTTSS Accessories & Spares

Double Diaphragm Accessories & Spares

DDRRUUM SM SUUCCTT. K. KIT FIT FOOR 515R 515/7/71616

423 634819

The drum suction kit fits direct onto the centre suction port on the Husky 515 and 716 pump. It is

made of stainless steel for maximum corrosion resistance and is delivered with a 2" bung hole adapter

for tight connection to the drum.

SSEERRVVICICE KE KIT FIT FOOR 515R 515/7/71616

423 634795

Fluid section repair kit (diahragms/balls/seats)

for model 515 polypropylene , 716 stainless

steel

51

�� +�� !" "# !� � ��, �) %��& �'��+&��$�(��)�'*

�� +�� !" "# !� � ��, �) %��& �'��+&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING




PAINT SPRAYING

Our range of paint spraying equipment, spares and accessories allow efficient completion of onboard painting tasks, no matter how big or small the job. All products are available across WSS’s extensive global network and come complete with our 24/7 service guarantee.

MAMARRINE PINE PRROODDUUCCTTSS Paint Spraying Equipment

Airless Paint Spraying Equipment

UUNITNITOOR HUR HURRRRICICAANE 25DNE 25D

420 732313

The Hurricane 25D airless spray unit is a handy

machine that gets to the "hard to reach" places.

Its light weight and portability reduces the

length of hose required. Mounted on a drum.

Features

• High power to weight ratio

• High durability and quality

• Mobile

Technical data

Flow capacity max 2 l/min


Ratio 25:1

Weight 25 kg

Benefits

• Easy to move around the vessel

• Reaches even "hard to get to" areas

• Long lifespan and less downtime

• Supplied ready to use - "plug and play"

Accessories


718908 HOSE 1/4" 15M FOR PAINT SPRAYING

588467 FLEX WHIP HOSE 1/4IN 1 MTR


718916 SWIVEL NIPPLE 3/8"M X 3/8"F


734756 AIRLESS PAINT SPRAYING GUN 32

729290 FLUID FILTER FOR HURRICANE 32 & 25D

728964 POLEGUN 1.3M FOR PAINT SPRAYING


728949 POLEGUN 3M FOR PAINT SPRAYING

614511 HOSE ADAPTOR 1/4"M 3/8"M

606469 HOSE ADAPTOR


729152 REP KIT AIR MOTOR HURRICANE 25D

729153 REP KIT LOWER PUMP HURRICANE 25D

Supplied with: Drum (with wheels), air regulator, paint filter,

suction hose, 30 m high pressure hose, airless gun, HD RAC

tip assembly, 1 tip.

54

UUNITNITOOR HUR HURRRRICICAANE 32NE 32

420 732305

The Hurricane 32 airless spray units handle the

majority of painting jobs in your daily work on

board, and sprays materials from stains to high

builds in the light to medium-heavy viscosity

range. The low operating speed reduces wear

and increases the working life. The well-

balanced cart allows easy movement on site

and simple access for maintenance.

Features


• Light-weight


• Mobile

Technical data

Flow capacity max. 4 l/min

Max. working pressure 224

Ratio 32:1

Weight 32 kg

Benefits





Accessories







729289 FILTER SUPPORT F/HURRICANE 32 & 25D






606469 HOSE ADAPTOR



729155 REP KIT LOWER PUMP HURRICANE 32

729154 REP KIT AIR MOTOR HURRICANE 32

Supplied with: Cart, air regulator, paint filter, suction hose,

30 m high pressure hose, airless gun, HD RAC tip assembly,

1 tip.

55


420 732297

The Hurricane 45 airless spray units handle the

majority of painting jobs in your daily work on

board. The low operating speed reduces wear

and increases the working life. The well-

balanced cart allows easy movement on site

and simple access for maintenance.

Features


• Light-weight


• Mobile - balanced cart

Technical data

Flow capacity, max 12.7 l/min

Max operating pressure 270 bar

Ratio 45:1

Weight 89 kg

Benefits





Accessories







729288 FILTER SUPPORT F/HURRICANE 45 & 73

729285 O-RING F/HURRICANE 45 & 73





606469 HOSE ADAPTOR


729286 FLUID FILTER F/HURRICANE 45 & 73




Supplied with: Cart, air regulator, paint filter, suction hose,

30 m high pressure hose, airless gun, HD RAC tip assembly,

1 tip.

56


420 732289

The Unitor Hurricane 73 airless spray unit is at

the high end of the Unitor range and has proven

its reliability even with the most viscous or

abrasive materials and under the most difficult

conditions. The slow piston movement on the

pumps means longer life, even with abrasive

materials.

Features


• Light-weight


• Mobile

Technical data


Pressure 510 bar

Ratio 73:1

Weight 95 kg

Benefits





Accessories













606469 HOSE ADAPTOR






Supplied with: Cart, air filter/regulator/lubricator, paint filter,

suction hose, 30 m high pressure hose, airless gun, HD RAC

tip assembly, 1 tip, grounding cable.

57

MAMARRINE PINE PRROODDUUCCTTSS Accessories, Consumables & Spares

Accessories for Airless Paint Spraying Equipment

PPOOLLEEGGUUN FN FOOR PR PAAINT SINT SPPRRAAYYINGING

The Polegun allows users to increase reach and

efficiency. All models are equipped with a trigger

guard and a 180 degree swivel at the nozzle.

The pole gun is supplied with a tip guard

Features

• Flexible

Benefits

• Reach high areas

Ordering information





AAIRIRLLEESSS PS PAAINT SINT SPPRRAAYYING EING EQQUUIPIPMEMENT ANT ACCCC..

The following list of accessories are for the Unitor Hurricane airless paint spraying equipment range.






588525 FLUID FILTER 60 MESH 2PCS

606469 HOSE ADAPTOR

606472 FILTER SCREEN SUPPORT






729289 FILTER SUPPORT F/HURRICANE 32 & 25D



625319 AGITATOR F. 10 GAL PAIL


58


Accessories for Airless Paint Spraying Equipment

AAGGITITAATTOOR GR GAALLLLOON PN PAAILIL





AAIRIRLLEESSS PS PAAINT SINT SPPRRAAYYING GING GUUNN


Product name Product number

AIRLESS PAINT SPRAYING GUN 32 734756

AIRLESS PAINT SPRAYING GUN 73 734764

59


Consumables for Airless Paint Spraying Unit

HD RHD RAAC TC TIPIP

426 634971

Standard for all Unitor paint spraying units. Enables use of GHD spray tips. Select spray tips separately

from GHD table.



634971 HD RAC TIP NO GHD 615

588566 HD RAC TIP SIZE 617








TTHRHROOAAT ST SEEAAL LL LIQIQUUID 1 LID 1 L

427 588517

Throat seal liquid is applied on all paint spray units in the throat oil cup to prevent paint from sticking to

the piston rod. Prolongs lifetime of the pump seals by 5 to 10 times when used regularly.

60


Rep Kits and Spare Parts for Airless Paint Spraying Equip

RREEP KP KIT HUIT HURRRRICICAANENE

Repair kit for Hurricane unit.



729152 REP KIT AIR MOTOR HURRICANE 25D

729153 REP KIT LOWER PUMP HURRICANE 25D







61

�� -�� !" "# . � �� %��& �'��-&��$�(��)�'*

�� -�� !" "# . � �� %��& �'��-&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING




AIR TOOLS

WSS’s range of pneumatic air tools includes air guns, drills, grinders and wrenches. The entire product range is backed up by our global network, 24/7 service support and experienced technicians and product experts.

MAMARRINE PINE PRROODDUUCCTTSS Air Tool Equipment

Air Line Equipment

AAIR HOIR HOSSEE, P, PVVCC

PVC reinforced hose, coil of 50 m. Working

pressure 10-20 bar (depending on size)



671693 AIR HOSE 1/4", PVC




671735 AIR HOSE 1", PVC

AAIR HOIR HOSSEE, R, RUUBBBBEERR

Rubber reinforced hose, coil of 50 m. Working

pressure 10 bar. More flexible than PVC.

Excellent mechanical wear characteristics.



671743 AIR HOSE 1/4", RUBBER



671776 AIR HOSE 3/4", RUBBER LTH=50MTR

671786 AIR HOSE 1", RUBBER

64


Air Line Equipment

AAIR LIR LINE UINE UNIT FNIT FILIL/R/REEGG/L/LUUBB

401 624585

Air line unit filter/reg/lub

Features

• The unit is compact and the stainless steel frame

(316 SST) gives exceptionally good protection of the

fragile parts in case of tip-over

• The low centre of gravity of the unit increases stability

and the Unitor series 400 stainless quick couplings

at both inlet and outlet simplifies operation

• The FRL unit also features outlets by-passing the

lubricator for oil free air

Benefits

• Unitor airline unit lowers the maintenance costs and

adds years of trouble free operation to every air

operated tool



191858 400 UPH PLUG 1/2'' HOSE

191700 400 USH SOCKET 1/2'' HOSE

65


Air Line Equipment

FFLLEEXXIBIBLLE HOE HOSSE 30CE 30CM 3M 3//8"8"

401 183418

Air hose for use between tool and air supply

hose. High felxibilty and reduces vibration wear

on the operator.

Features

• 3/8" X2B

• 3/8" male in one end

• Plug fits 20, 30 and 40 series Unitor quick coupling

• Working pressure max 300 PSI / max 20 bar

Technical data

Length 300 mm

HOHOSSE CE CLLAAMP FMP FOOR 3R 3//8" HO8" HOSSEE

401 729443

Hose clamp 3/8" 10 pcs

66


Air Gun

AAIR GIR GUUN AN AGG-P-PRROO

The Unitor air gun AG-PRO 10 and AG-PRO 30

are ideal for quick removal of chips, dust and

particulate from any surface. Longer lance on

the AG-PRO 30 allows projection of airflow

directly to required areas, while the shorter AG-

PRO 10 is ideal for cleaning liquid, swarf or dust

in the workshop.



718940 AIR GUN AG-PRO 10

718957 AIR GUN AG-PRO 30

Accessories


191874 20 UPM PLUG 1/4'' MALE BSP.T

67


Deck Scalers

DDEECCK PK PLLAANNENNER DR DPP-P-PRRO 200O 200

400 734046

The DP-PRO 200 presents a combination of

innovative technology with performance, tested

features and benefits in a rugged rotary planer

unit. The modern integral design of the machine

provides an easier to maneuver unit, end

ensures even profiling and a higher work rate.

Suitable for rapidly removing scale, rust, paint

and other deposits from steel surfaces in

preparation for re-coating.

Features

• Fully adjustable operating height

• Vacuum port as standard

• Accurate depth control

• Variety of accessories

Benefits

• Operator comfort

• Enable dust control if used with an industrial dust collector

• To regulate material removal to desired effect

• Offers the correct tool for every application

Technical data


Air consumption 4,6 m3/min

Rotation speed 1600 RPM

Cutting width 195 mm

The DP Pro 200 is a tough deck planer machine built to

tackle the most demanding applications of surface

preparation and material removal from large area steel deck

surfaces. At 45 kg it is light enough to easily manoeuvre

between levels and the accurate depth control and variety of

accessories enables material from light rust to heavy scale or

paint to be removed at a rapid rate. Simple to use, the DP

Pro 200 will take minimal operator training & requires little

after sales management.

Accessories


Consumables:

734053 CUTTING WHEEL REPL. KIT, DP-PRO 200

Accessories:

191965 600 UPF PLUG 3/4'' FEMALE BSP.T

68


Deck Scalers

DDEECCK SK SCCAALLEER DR DSSH-PH-PRRO 11O 11

400 734061

For use on large area decks & tank bottoms the

DSH PRO 11 will fracture & reduce scale,

corrosion & thick coatings in minutes. Eleven

heads operating at 3000 blows per minute will

rapidly break down the most stubborn surface

contaminants.

Features

• Vibration damped

• Low profile body height

• Optional vacuum shroud available

• 11 x 3000 blows per minute

Benefits

• Increases operator comfort & safety

• For cleaning under steps & pipes

• To reduce hazardous & nuisance dust when used

with an industrial dust collector

• Highly productive & effective means of coatings/

corrosion removal

Technical data


Air consumption 1,9 m3/min

Hamer frequency 11 x 3000 blows/min

Cutting width 252 mm

The Unitor DSH-PRO 11 is ideally suited for thick coating

removal and surface preparation on large areas of deck and

tank floor cleaning, complimenting the Unitor hand held

scaling hammer range. Eleven heads impacting at 3000

strokes per minute break down the hardest of coatings.

Accessories


Consumables:

734079 HAMMER REPLACEMENT KIT, DSH-PRO 11

Accessories:


69


Drills

DDRRILILL RL REEVVEERRSSIBIBLLE AE ADD-P-PRRO 1800O 1800

404 722207

The AD-PRO 1800 is the perfect tool for light

and medium duty drilling operations. Despite its

light weight the AD-PRO 1800 is extremely

durable and also highly efficient - yet with a

minimum amount of air consumed.

Features

• Lighter than any electrical drill in its class

• Ideal for light to medium drilling operations

Benefits

• Lightweight

• Easy to operate

• Exhaust position does not stand in the way of efficiency

Technical data

Rotation speed 1800

Air consumption 0.31

Drill diameter max 10 mm

Connection size/type 1/4'' (PT) NPT

Max air pressure 6,2 bar


Supplied with: Hose nipple NPT (1 pc)

Accessories


Accessories:


736587 EAR MUFF HEADBAND VERSION TYPE EXC

632943 SAFETY SPECTACLES CLEAR

Consumables:

614002 DRILL SET,HSS,KM 21,1-13

614005 DRILL SET,HSS,KZ 29

70


Grinders

AANGNGLLE GE GRRINDINDEER AR AGG-P-PRRO 4 B VO 4 B VEERRSSIOIONN

402 756901

The Unitor series of angle grinders is designed

to cope with the daily tasks within the tough

marine environment. Each unit is fully tested for

reliability and endurance during onboard

maintenance operations. The Unitor angle

grinders are designed for fast and efficient

grinding, cutting and sanding.

Please note that you must only use Unitor original

consumables due to the high speeds of the units and the

inherent danger of injury to the operator when using low

quality consumables.

Accessories


Consumables:

777697 CUP WIRE BRUSH 2.5" W 3/8"X24 UNF

71


Grinders

AANGNGLLE GE GRRINDINDEERR

The Unitor series of angle grinders is designed

to cope with the daily tasks within the tough

marine environment. Each unit is fully tested for

reliability and endurance during onboard

maintenance operations. The unitor angle

grinders are designed for fast and efficient

grinding, cutting and sanding.

Please note that you must only use Unitor original

consumables due to the high speeds of the units and the

inherent danger of injury to the operator when using low

quality consumables.



721985 ANGLE GRINDER AG-PRO 5

721977 ANGLE GRINDER AG-PRO 7

72


Grinders

DDIE GIE GRRINDINDEER DR DGG-P-PRROO

Compact and easy to handle tools with extremely high operating speeds. The units are compact,

enabling easier operation in confined spaces. Unitor DG-PRO units can be used for a wide range of

tasks such as precision grinding, deburring of machined parts, removing welding slag and shaping of

metals.



722009 DIE GRINDER DG-PRO 18

722017 DIE GRINDER DG-PRO 22

Supplied with: Single ended spanner and hose nipple.

Accessories


Consumables:

536797 GRINDING STONES SET 10PCS

Accessories:


73


Impact Wrenches

IMPIMPAACCT WT WRREENCNCHH

Unitor's impact tool offer consists of a well

proven range of wrenches capable of tackling all

your daily needs on board. These tools should

be choosen when quality, ergonomy and

resistance to wear are of vital importance.



722173 IMPACT WRENCH IW-PRO 1/2"

722181 IMPACT WRENCH IW-PRO 3/4"

722199 IMPACT WRENCH IW-PRO 1"

74


Needle Scalers & Chipping Hammers

NENEEEDDLLE SE SCCAALLEER JR JEEXX--2800 L2800 LOOW VW VIBIBRRAATTIOIONN

400 682062

The Unitor Jex-2800 represents a new

generation of pneumatic scalers developed to

suit the demand for a more user-friendly scaler.

The new unit features an improved design with

improved ergonomics. Vibration is lowered to

reduce the user fatigue and increase efficiency.

The unit also features a quick needle-change

system that requires no tools.

Technical data

Length 335 mm

Weight 3.1 kg



Needle size 3&4 mm


Supplied with:

• Needle 3 x 180 mm 28 pcs

• Mounted needle 4 x 180 mm 14 pcs

• Needle supporter 4 mm 1 pc

• Bushing 1 pc

• Hose nipple 1 pc

Accessories


Consumables:

728766 NEEDLES 3MM FOR NS-PRO SERIES


Accessories:

183418 FLEXIBLE HOSE 30CM 3/8IN

75



NENEEEDDLLE SE SCCAALLEER NSR NS-P-PRRO 19O 19

400 722033

The Unitor NS-PRO chisel range helps you do

the job right the first time, regardless of how big

the task is. Each unit has the performance

features to give you "a dozen tools in one" easy-

to-use, pneumatic instrument. NS-PRO chisels

tackle each job effectively and effortlessly, with a

minimum of operator effort needed.

Features

• Heavy duty and highly efficient smaller needle scaler

for applications, on board, where you do not need

the biggest units

• These units can be used with 2 mm or 3 mm

needles depending on application

Technical data



Needle size 2&3 mm

The NS-PRO chisels operate without springs. This means no

springs to break, no irregular power, and the advantage of

low air consumption. The needles adjust automatically to

operate efficiently on your workpiece irrespective of the

contours.


Supplied with: Needle 3 x 180 mm mounted and hose

nipple.

Accessories


Consumables:



76



NENEEEDDLLE SE SCCAALLEER NSR NS-P-PRRO 19 - SO 19 - STTRRAAIGIGHTHT

400 722041








Features

• Heavy duty and highly efficient smaller needle scaler

for applications, on boaard, where you do not need

the biggest units

• These units can be used with 2 mm or 3 mm

needles depending on application

Technical data



Needle size 2&3 mm





contours.


Supplied with: Needle 3 x 180 mm mounted on NS-PRO

19 and hose nipple.

Accessories


Consumables:



77



NENEEEDDLLE SE SCCAALLEER NSR NS-P-PRROO












contours.



722025 NEEDLE SCALER NS-PRO 28

722108 NEEDLE SCALER NS-PRO 66

Supplied with: Needle 3 x 180 mm mounted and hose

nipple.

Accessories


Consumables:




Accessories:

183418 FLEXIBLE HOSE 30CM 3/8IN

78



CCHISHISEEL SL SCCAALLEER CR CSS-P-PRROO

Power and performance to enable you to do

scores of shipboard descaling and cleaning jobs

quickly, efficiently and economically.

Application areas

• Removing old paint and rust from ship decks

• Dislodging solid matter from outer ship plates

• Removing concrete adhered to panels

• Cleaning steel tanks

• Dislodging scale from boilers plus scores of other

applications



722116 CHISEL SCALER CS-PRO 62

722124 CHISEL SCALER CS-PRO 120

Accessories


Consumables:

728832 SCRAPER 100MM FOR CS-PRO 62 & 120




79



CCHISHISEEL HAL HAMMEMMER CR CH-PH-PRROO

Chipping hammer CH-PRO 25 and CH-PRO 33

Straight makes chipping after welding easy.

High power and high performance saves time

and improves productivity.

Features

• Both are compact, economical units designed for all

kinds of chipping work

• A ball lock system allows the chisel to be changed

quickly and easily

• Locking or releasing the chisel requires only a slight

turn of the stop ring

• The rugged construction assures long-lasting

dependability and makes it well suited for use on

board for jobs such as de-slagging and de-spattering

of welds, cleaning metal surfaces of rust and scale, stripping paint, etc



722132 CHISEL HAMMER CH-PRO 25

722140 CHISEL HAMMER CH-PRO 33

Supplied with: Curved flat chisel and hose nipple.

80


Quick Couplers

UUSSH SH SOOCCKKEETT

The Unitor couplers are time tested and proven

to out-perform in all applications and to be

totally leakage free. They are the result of many

years of development aimed in one direction: an

uncompromising standard of quality and flow

performance in each and every application.

Features

• Time tested and proven over 30 years to be

precision perfect and leakage free

• Helps you build efficient air lines everywhere on

board

Benefits

• Uncompromising standard of quality and flow performance in each and every application

The plug and socket fitting portion of couplings 20,30 and

40 are interchangeable, as are those of the 400, 600 and

800 couplings. This means that a coupling 20 may be

connected to a 30 or 40, the only difference being the flow

capacity of the couplings.








633459 800 USH SOCKET 1" HOSE

81


Quick Couplers

UUSSM SM SOOCCKKEETT

405 191726

The Unitor couplers are time tested and proven

to out-perform in all applications and to be

totally leakage free.

Features

• Time tested and proven for over 30 years to be



board

Benefits

• Uncompromising standard of quality and flow

performance in each and every application

The plug and socket fitting portion of couplings 20,30 and







191726 20 USM SOCKET 1/4'' MALE BSP.T




191767 600 USM SOCKET 3/4" MALE BSP.T

633467 800 USM SOCKET 1" MALE BSP.T

82


Quick Couplers

UUSSF SF SOOCCKKEETT

Helps you build efficient air lines everywhere on

board. The Unitor couplers are time tested and

proven to out-perform in all applications and to

be totally leakage free.

Features




board

Benefits



The plug and socket fitting portion of couplings 20, 30 and







191775 20 USF SOCKET 1/4'' FEMALE BSP.T





633475 800 USF SOCKET 1" FEMALE BSP.T

83


Quick Couplers

UUPPH PH PLLUUGG





Features




board

Benefits










191825 20 UPH PLUG 1/4'' HOSE

191833 30 UPH PLUG 3/8'' HOSE

191841 40 UPH PLUG 1/2'' HOSE

191858 400 UPH PLUG 1/2'' HOSE

191866 600 UPH PLUG 3/4'' HOSE

633483 800 UPH PLUG 1" HOSE

84


Quick Couplers

UUPPM PM PLLUUGG





Features




board

Benefits



20 UPM socket with 1/4” male thread, for air connection

system













633491 800 UPM PLUG 1" MALE BSP.T

85


Quick Couplers

UUPPF PF PLLUUGG

Helps you build efficient air lines everywhere on board. The Unitor couplers are time tested and proven

to out-perform in all applications and to be totally leakage free.

Features

• Time tested and proven for over 30 years to be precision perfect and leakage free

• Helps you build efficient air lines everywhere on board

Benefits

• Uncompromising standard of quality and flow performance in each and every application

316 Stainless steel













633499 800 UPF PLUG 1" FEMALE BSP.T

UUNITNITOOR DR DRRAAIN VIN VAALLVVEE

405 193474

Drain cock M-20. For use in connection with air

distributor medusa.

86


Quick Couplers

UUNITNITOOR QR QUUICICKKVVIEIEW PW PRREESSSSUURRE GE GAAUUGGEE

405 193482

Pressure gauge quickview has a scale of 0-15

bar. Will fit on any socket of type 20, 30 or 40,

plus on air distributor S-30.

UUNITNITOOR MER MEDDUUSSA AA AIR DIR DISISTTRRIBIBUUTTOORR

405 193490

The Medusa is an ideal product for distributing

air to several tools or other sources needing air

The inlet is from a 1/2" or a 3/4" hose with a 400, 600 and

800 series socket.

The five outlets are for 1/4", 3/8" or 1/2" hoses with the

respective 20, 30 or 40 series plug.

The pressure gauge and drain cock fit the outlets.

87

MAMARRINE PINE PRROODDUUCCTTSS Air Tools accessories, consumables & spares

Drills - Accessories, consumables & spares

DDRRILILL BL BIT SIT SEET MET METTRRIC - HIGIC - HIGH SH SPPEEEED SD STTEEEELL

440 614002

Drill bit set containing 21 pcs. DIN 338 RN

rollforged, metric.

Quantity 21 -

Size 1 - 13 mm

Rollforged twist drill with best toughness combined with

good cutting efficiency for drilling alloyed carbon and plain

steel.

Point angle 118

Contents mm 1 / 1,5 / 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 5 / 5,5 / 6 /

6,5 / 7 / 7,5 / 8 / 8,5 / 9 / 10 / 11 / 12 / 13

88


Deck Scalers - Accessories, consumables & spares

HAHAMMEMMER RR REEPPLLAACCEEMEMENT KNT KIT DIT DSSH-PH-PRRO 11O 11

401 734079

Hammer replacement kit DSH-PRO 11

CCUUTTTTING WING WHEHEEEL RL REEPPLLAACCEEMEMENT KNT KIT FIT FOOR DR DPP-P-PRROO200200

401 734053

Complete kit with 200 cutting wheels

89


Ear Clamps & Hose Clamps

HOHOSSE CE CLLAAMPMP

Worm drive hose clamps are used where there

is a need for rapid mounting/dismantling of

hoses



729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS

729444 HOSE CLAMP FOR 1/2" HOSE (10 PCS)

729445 HOSE CLAMP FOR 3/4" HOSE (10 PCS)

729446 HOSE.CLAMP FOR 1" HOSE (10 PCS)

90


Ear Clamps & Hose Clamps

CCLLAAMP 1 EMP 1 EAARR

Features

• Unique clamp design

• Specially deburred edges reduce the risk of damage

to the part being clamped

• Material stainless steel

Benefits

• Fast, simple and safe installation

• Tampering is visible

• Long lasting connection

Ear clamps are commonly used where a minimal protrusion

and a small clamping range is essential. They are commonly

used for welding gas hoses. Also suitable for use with

rubber hoses, plastic tubing and electrical cables.



768416 CLAMP.1 EAR 12,3-14,3MM 1/4"""" HOS

768440 CLAMP 1 EAR 17,1-20,0MM OD HOSE

768432 CLAMP.1 EAR 15,6-17,8MM 3/8"""" HOS

768457 CLAMP 1 EAR 22-24.8 MM 1/2 " HOSE

768481 CLAMP 1 EAR 26,5-30,0MM 3/4" HOSE

777971 CLAMP 1 EAR 29.3 - 34 MM 1" HOSE

91


Grinders - Accessories, consumables & spares

PPLLAASSTTIC PIC PAADDS FS FOOR AR AGG-P-PRROO



755900 PLASTIC PAD 4"" FOR AG-PRO 4B

755918 PLASTIC PAD 5"" FOR AG-PRO 5

755926 PLASTIC PAD 7"" FOR AG-PRO 7

GGRRINDINDING SING STTOONENES SS SEET 10 PT 10 PCCSS

401 536797

Grinding stones set 10 pcs

Quantity 10 -

Size 6 mm

92



CCUUTTTTING DING DISISCCSS

Cutting and grinding consumables: Unitor high

quality cutting and grinding wheels ensure the

highest possible degree of efficiency without

compromising on operator safety.

Standard depressed wheels with medium bonding for

general use on a variety of metals. 25 in package.



633515 CUTTING DISCS 100X2.5X16

633531 CUTTING DISCS 115X2.5X22

633547 CUTTING DISCS 125X3X22



CCUUTTTTING DING DISISCCS INOS INOXX

Unitor high quality cutting and grinding wheels ensure a highest possible degree of efficiency without

compromising on operator safety.

Features

• Inox depressed wheels with soft bonding for use on stainless steel and high alloy stainless steel

• The soft bonding also enables the Inox wheels to be used on aluminium

• Iron free



633595 CUTTING DISCS 125X2,5X22



Supplied with: Pack of 25 pcs

93



GGRRINDINDING DING DISISCCSS

The Unitor high quality cutting and grinding wheels ensure the highest possible degree of efficiency

without compromising on operator safety.

Standard depressed wheels with medium bonding for

general use on a variety of metals.



633523 GRINDING WHEELS, 4INCH, 10PCS

633539 GRINDING DISCS 115X6X22



633587 GRINDING DISCS 230X6X22

94



SSAANDNDING DING DISISCC

The Unitor high quality abrasive fibre discs and

abrasive mop discs ensure the highest possible

degree of efficiency with a long service life.

Features

• Recognised by a low clogging rate

• Even grinding finish

• Ideal for applications requiring cool grinding

Fibre discs to be used with backing pads. Unitor fibre discs

are made of aluminium oxide grain with resin bonding for

multi purpose application on a wide range of metals.



692574 SANDING DISC 100MM, #24









95



MOMOP DP DISISCCSS

The Unitor high quality abrasive fibre discs and

abrasive mop discs ensure the highest possible

degree of efficiency with a long service life.

Features

• Recognised by a low clogging rate

• Even grinding finish

• Ideal for applications requiring cool grinding

Mop discs are made of abrasive coated flaps fastened to a

glass fabric backing plate. The even arrangement of the

flaps guarantees high flexibility and constant high grinding

performance over the tools complete service life. Unitor mop

discs are made of alumina zirconia grain with resin bonding.

This combination is equally suitable for application on steels,

stainless steel, aluminium, plastic, wood, etc.



633691 MOP DISCS 100X16MM, #36

633699 MOP DISCS 100X16MM, #60

633707 MOP DISCS 100X16MM, #80

633715 MOP DISCS 125X22MM, #36

633723 MOP DISCS 125X22MM, #60

633731 MOP DISCS 125X22MM, #80

633739 MOP DISCS 180X22MM, #36

633747 MOP DISCS 180X22MM, #60

633755 MOP DISCS 180X22MM, #80

Supplied with: Pack of 10 discs

96


Impact Wrenches - Accessories, consumables & spares

IMPIMPAACCT ST SOOCCKKEET ST SEETT



728833 IMPACT SOCKET SET FOR IW-PRO 1/2"

728725 IMPACT SOCKET SET FOR IW-PRO 3/4"

728741 IMPACT SOCKET SET FOR IW-PRO 1"

97


Scalers & Chipping - Accessories, consumables & spares

PPISISTTOON RN REEPPLLAACCEEMEMENT KNT KITIT

Piston replacement kit for SH-PRO 3 and 1



722462 PISTON REPLACEMENT KIT FOR SH-PRO 3

722769 PISTON REPLACEMENT KIT FOR SH-PRO 1

NENEEEDDLLEES FS FOOR NSR NS-P-PRRO SO SEERRIEIESS

Needles for NS-PRO series






98


Scalers & Chipping - Accessories, consumables & spares

SSCCRRAAPPEER FR FOOR CR CSS-P-PRRO 62 & 120O 62 & 120







CCHISHISEEL SL SEET FT FOOR CR CH-PH-PRROO



728782 CHISEL SET FOR CH-PRO 25

728790 CHISEL SET FOR CH-PRO 33

99


Quick Couplers - Spares

RRUUBBBBEER PR PAACCKKING FING FOOR 20-R 20-30-30-4040

405 323121

Spare packing for all USH, USM, USF, UPH, UPM and UPF 20, 30 and 40 series.

RRUUBBBBEER PR PAACCKKING FING FOOR 400-R 400-600600

405 323139

Spare packing for all USH, USM, USF, UPH, UPM and UPF 400 and 600 series.

100

�� !" "# �� /0$ �� %��& �'��&��$�(��)�'*

�� !" "# �� /0$ �� %��& �'��&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING




WORKSHOP EQUIPMENT

Onboard maintenance and repair tasks are often carried out in small, difficult to reach spaces and require tools that are light, easily transportable and simple to store.

Our range of workshop equipment includes wire lubricators, electric and battery tools and accessories, while our hydraulic equipment ranges from drills, grinders and saws, to pumps and cylinders, as well as accessories and spares.

MAMARRINE PINE PRROODDUUCCTTSS Wire Lubricator

Wire Lubricator

UUNITNITOOR WR WIRIRE RE ROOPPE LE LUUBBRRICICAATTOOR UR UWWLL7777

482 728840

Unitor wire rope lubricator solves the lubrication

problem, saving time and extending rope

lifetime.

Features

• Easy to use – saves time and man-hours

• Supplied with pump and hoses

Benefits

• Prolongs the life of a wire rope by up to 100%

• Increases safety during wire lifetime

Technical data



Ratio 5:1

Inlet air pressure 7 - 8 bar

High pressure pump with flow control valve, drum cover,

flow control value, follower plate, 3 m of flexible grease hose,

Unitor Lubricating chamber, 2 lengths of anchor chain.

Model UWL 77 - seals set for this model come in 15

diameters at 3 mm intervals.

Seals must be ordered separately.

Accessories


729086 SEAL KIT FOR UWL77 - 34MM.

729087 SEAL KIT FOR UWL77 - 35MM

729088 SEAL.KIT FOR UWL77 - 38MM



729091 SEAL .KIT FOR UWL77 - 47MM










Spares parts available for purchase:

728931 LUBRICATOR.CHAMBER FOR UMWL77

104

UUNITNITOOR WR WIRIRE RE ROOPPE LE LUUBBRRICICAATTOOR UR UWWLL3355

482 728980

Unitor wire rope lubricator solves the lubrication

problem, saving time and extending rope

lifetime.

Features

• Easy to use – saves time and man-hours

• Supplied with pump and hoses

Benefits

• Prolongs the life of a wire rope by up to 100%

• Increases safety during wire lifetime

Technical data

Hose length 3 m



Ratio 5:1

Inlet air pressure 7 - 8 bar

High pressure pump with flow control valve, drum cover,

flow control value, follower plate, 3 m of flexible grease hose,

Unitor Lubricating chamber, 2 lengths of anchor chain.

Model UWL 35 - seals set for this model come in 17

diameters at 2 mm intervals.

Seals must be ordered separately.

Accessories




729004 .SEAL KIT FOR UWL35 - 8MM










729082 SEAL .KIT FOR UWL35 - 28MM.




728881 LUBRICATOR.CHAMBER FOR UMWL35

105


Wire Lubricators Accessories

LLUUBBRRICICAATTOOR CR CHAHAMBMBEER FR FOOR UR UWWLL3355

482 728881

Spare part / replacement chamber for UWL 35. Only use original UWL pump with chamber.

LLUUBBRRICICAATTOOR CR CHAHAMBMBEER FR FOOR UR UWWLL7777

482 728931

Spare part / replacement chamber for UWL77. Only use original UWL pump with chamber.

SSEEAAL KL KITITS FS FOOR UR UWWLL3355

A set of seals can lubricate approximately 9000 - 12000 ft (3000 - 4000 m) of wire rope.





729004 .SEAL KIT FOR UWL35 - 8MM










729082 SEAL .KIT FOR UWL35 - 28MM.



106


Wire Lubricators Accessories

SSEEAAL KL KITITS FS FOOR UR UWWL 77L 77

Seal for UWL77

A set of seals can lubricate approximately 9000 - 12000 ft (3000 - 4000 m) of wire rope.


















107

MAMARRINE PINE PRROODDUUCCTTSS Electric & battery Tools

Working Lamps

LLAAMP CMP COORRDDLLEESSS FS F//77..2-2-12 V B12 V BAATTTTEERRIEIESS

440 721795

Handy, high performance cordless professional lamp. Can be used with 7.2-9.6-12 V battery packs.

Solid design for use in MVI, lamp stands on battery pack. Practical folding design and battery not

included.

Benefits

• Handy and cordless

• Lamps stand on battery pack

• Can be folded

Technical data

Voltage 7,2 - 9,6 - 12

Power rating 60 W

Light output (lm) 400

Light duration (1 hrs charge) 2 - 2,5 - 3

108


Saws & Cutters

CCIRIRCCUULLAAR SR SAAWW, 160 MM, 160 MM

440 721860

Technical data

Power, rated 1.35 kW

Voltage 230 V

50/60 Hz. Robust 1350 watt motor with large power

reserves for optimum results. Protection hood for optimum

sawdust extraction up to 90%. Scale for precise cutting

depth settings to 55 mm at 90°. Variable adjustment of the

mitre angle to 45°. Spindle lock for fast blade changing.

Optimum balance for safe, fatigue-free operation. Additional

handle for safe two-handed work. Suitable for left-handed

use. Safety switch with switch lock prevents unintentional

starting of the machine. Stable block construction for low-

vibration running and long service life. Saw blade can be

adjusted to be at right angles and parallel to the base plate.


Supplied with:

Carbide-tipped 24 tooth saw blade

Parallel guide

Spanner

Chip director

109


Saws & Cutters

JJIG SIG SAAWW

440 721878

A compact jig saw with ergonomic handle

design. Light and handy, ideal for any

application.

Technical data

Power, rated 0.6 kW

Voltage 230 V

50/60 Hz. Powerful 600 watt motor with large power

reserves. Patented FIXTEC system for fast saw blade

changing without any tools. Exact saw blade guidance with

blade support roller on needle bearings fitted in a very low

position. Full-wave electronics with variable preselection of

stroke rate from 450 to 3000 RPM for work suited to

materials. Four-stage adjustment of the pendulum action for

increased cutting performance and longer saw blade service

life. Very comfortable, handy ergonomic design. Also suitable

for left-handed use. Base plate variable on both sides for

precise mitre cuts to 45°, can be locked in positions 0°, 15°,

30° and 45°. Longitudal displacement of the base plate for

sawing close to the edge. Clean cutting edge with anti-

splintering device. Sawdust blower and integrated dust

extraction adaptor for clean work and clear view of the

cutting area.


Supplied with:

Combined parallel guide

Circular guide

Saw blade

Plastic guide shoe

Anti-splintering device

Spanner

110


Saws & Cutters

BBEENCNCH CH CUUTTTTEERR

440 615218

Suitable for all angle grinders with M 14 spindle

thread and disc.

Technical data

Spindle size M 14

Vice span 120 mm

Base plate 325 x 290 mm

Diameters of at least 150 mm, without conversion. Solid

smooth surfaced die-cast base. Automatic swing back

cutting disc hood and spark protection. Mitre cuts possible

to 45°. Maximum disc use through favourable swivel point

and fully adjustable vice. Robust die-cut clamping device

(with hard rubber) for angle grinders. Stable die-cast

aluminium casing. Suitable for all two-hand angle grinders.


Supplied with:

Clamping device supplied as standard vice handle

2 clamping screws

M 14 transport safety device

Spanner

SW17/21

111


Drills

BBAATTTTEERRY DY DRRILILL 12 VL 12 V

440 721803

Technical data

Weight 1.6 kg

Voltage 12 V

Chuck size 1.5-13


Keyless chuck POWER PLUS high-torque motor: 30% more

torque, 20% more efficiency variable speed trigger switch

and softstart reversible action. QUICKSTOP motorbrake:

spindle comes to an instant standstill two-speed

synchromesh gears direct bit reception in drill spindle. Less

weight and improved visibility. 19-stage torque adjustment:

uniform results and optimised precision when screwdriving in

series. 2way-flex battery pack insertion: improved balance

and flexibility High capacity 12 V / 2.0 Ah battery. Ergonomic

softgrip handle design for more comfortable use. Pistol

design for extra comfort in drilling applications. Includes 2

batteries.


Supplied with:

13 mm keyless chuck

12 V / 2.0 Ah battery pack

RC charger (1 hour)

Carrying case

112


Drills

DDRRILILLL, C, CHUHUCCK SK SIZIZE 1-E 1-10 MM10 MM

440 721894

Features

• Heavy duty

• 50/60 Hz

• Keyless chuck

• Electronic: variable preselection of speed via switch

Benefits

• Excellent handling from a compact ergonomic design

with user comfort from soft-grip and broad switch

• QUIK-LOK system provides a fast cable change for

replacement or extensions

• Optimal speed range for up to 10 mm drilling

diameters in metal

Technical data

Power, rated 0.6 kW

Voltage 230 V

Chuck size 1-10



Supplied with:

Keyless chuck with retaining screw

QUIK-LOK cable, 4.1 m

113


Drills

DDRRILILLL, C, CHUHUCCK SK SIZIZE 3-E 3-16 MM16 MM

440 721902

Features

• Heavy duty with spade handle

• 230 V 50/60 Hz

• Power and torque for hole diameter up to 50 mm in

steel/wood

• Two-speed synchromesh gears can be shifted when

stationary and at no load speed

• Spade handle for reliable control

• Spindle with M18 x 2.5 thread

• Three-jaw chuck 3-16 mm

Benefits

• Metal gearbox provides long service life

• Hammer action can be switched off for drilling in wood, ceramics or metal providing wider range of use

Technical data


Voltage 230 V

Chuck size 3-16



Supplied with:

Three-jaw chuck

Additional handle

Depth gauge

114


Drills

PPEERRCCUUSSSSIOION DN DRRILILL PL PDD2E 22 R2E 22 R

440 778001

Features

• Fully insulated metal gearbox for long service life and

protection from electric shock

• Hammer action stop for drilling in wood and metal

• Lightweight, ergonomic front handle is fully

adjustable and can be securely fixed in the best

position to suit the required drilling angle

• High-quality keyless chuck

• Two-speed synchromesh gears

• Reversible action

Benefits

• AVS - Anti-Vibration System dramatically lowers the

level of vibration feedback to the user, and makes for more comfortable operation

• Softgrip on rear handle for more comfortable operation

• Safety clutch protects both the operator and the machine if the tool should block

Technical data

Power, Rated 850 W

Weight 2,8 kg

115


Grinders

AANGNGLLE GE GRRINDINDEER 5", 10000 RR 5", 10000 RPPMM

440 721928

Features

• 230 V 50/60 Hz. 710 W, lightweight, slim and

compact

• Flat compact gearhead design allows for optimised

cutting depth and longer grinding disk life

• New patented ERGO-switch allows for instinctive

user control

• Quick release safety guard

• Motor casing with 90° adjustment for four switch

positions

• Ideal for left hand use

• Dust protection through labyrinth airflow

• Automatic cut-out carbon brushes

Benefits

• Ideal for working in awkward, difficult-to-reach places

• Die-cast magnesium alloy gear casing provides lower vibration operation and long service life

• Dust protected bearings and switch operated cooling fan keeps the motor cool even under heavy duty conditions

• Safety spindle lock and patented FIXTEC flange nut with safety clutch saves valuable time when changing grinding

discs with no tools required

Technical data


Voltage 230 V

Spindle size M 14

Max cutting depth 33.4 mm

Disc size 125 mm


Supplied with:

Grinding disc

Safety guard

Additional handle

Flange

FIXTEC flange nut

116


Grinders


440 721852

Features

• High-performance angle grinder

• Very favourable performance/weight ratio 1900 watt/

4.4 kg

• Grinding disc diameter 180 mm with powerful 1900

watt motor

• Quick release clamp on safety guard with no tools

required

• Large-surface safety switch with lock function

prevents the machine from being started

unintentionally

• Motor casing with 90° adjustment for four switch

positions- Ideal for left hand use

• Additional handle can be fixed in 3 different positions

• Automatic cut-out carbon brushes

Benefits

• Extremely flat metal gearhead for working in awkward, difficult-to-reach places

• Die-cast magnesium alloy gear casing provides lower vibration operation and long service life

• Patented spindle safety lock saves valuable time when changing discs, with only one key

• Effective cooling fan keeps the motor cool even under heavy duty operation

Technical data

Power, rated 1.9 kW

Voltage 230 V

Spindle size M 14

Max cutting depth 43 mm

Disc size 180 mm


Supplied with:

Safety guard

Additional handle

Flange

Flange nut

Spanner

117


Grinders


440 721886

Features

• 230 V 50/60 Hz

• The power pack with the largest cutting depth for

particularly difficult cutting work grinding disc

• Patented spindle lock saves valuable time when

changing discs, with only one key

• Quick release clamp on safety with no tools required

• Large-surface safety switch with lock function

prevents the machine from being started

unintentionally

• Additional handle can be fixed in 3 different positions

Benefits

• Die-cast magnesium alloy gear casing for low-vibration operation and long service life

• Effective cooling fan keeps the motor cool even under heavy duty conditions Automatic cut-out carbon brushes

• Extremely flat metal gearhead ideal for working in awkward, difficult-to-reach places

Technical data

Power, rated 2.3 kW

Voltage 230 V

Spindle size M 14

Max cutting depth 68 mm

Disc size 230 mm


Supplied with:

Safety guard

Additional handle

Flange

Flange nut

Spanner

118

MAMARRINE PINE PRROODDUUCCTTSS Accessories, consumables & Spares for Electric Tools

Drills

DDRRILILL BL BIT SIT SEET IMPT IMPEERRIAIAL - HIGL - HIGH SH SPPEEEED SD STTEEEELL

440 614005

Rollforged twist drill with best toughness

combined with good cutting efficiency for drilling

alloyed carbon and plain steel.

Features

• 29 pieces - 1/16" to 1/2"

• DIN 338 RN rollforged

• Point angle 118

Technical data

Quantity 29 -

Size Inches

Sizes: 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64

7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64

3/8 25/64 13/32 27/64 7/16 29/65 15/32 31/64 and 1/2

BBAATTTTEERRY NICY NICD 18 VD 18 V//2.2.0A0A

440 721829

BBAATTTTEERRY CY CHAHARRGGEER 7R 7..2-2-224 V4 V//50-50-60HZ60HZ

440 721845

119

MAMARRINE PINE PRROODDUUCCTTSS Hydraulic Equipment

Cutter

HYHYDDRRAAUULLIC NUIC NUT ST SPPLLITITTTEERR

Features

• Single acting

• Unique angled head design

• Single-acting, spring return cylinder

• Heavy duty chisels can be reground

• Nut splitters include a spare chisel, a spare set screw and the wrench used to secure the chisel

Benefits

• Easily removes rusty nuts

• Compact and ergonomic design making it easy to use



615049 HYD.NUT SPLITTER,M6-M12




120


Flange Spreader

HYHYDDRRAAUULLIC FIC FLLAANGNGE SE SPPRREEAADDEERR

441 615053

Features

• Single acting

• Adjustable jaw widths from 59 mm to 163 mm for a wide range of applications

• Single-acting, spring return cylinders for fast trouble-free operation

• Standard wedge 3-28 mm stroke 38 mm

• Maximum operating pressure 700 bar

Benefits

• Light-weight, ergonomic design for ease of use

Technical data

Maximum flange thickness 2x57 mm

Stud size 19-28 mm

Oil capacity 5 ton

Oil capacity 24,6 cm3

Weight 2,3 kg

121


Pump & Cylinders

HYHYDDRRAAUULLIC PIC PUUMP CMP CYYLLINDINDEER SR SEETT

Single acting, general purpose cylinders and hand pumps.

Features

• Maximum versatility

• The quickest and easiest way to start working right away

• Optimum match of individual components

• All sets are ready-for-use

• All hand pumps are two-speed

Base plates for 615001 and 615003 are available for

purchase separately.



615001 HYD.PMP CYL.SET,10T



Supplied with:

1.8 m safety hose

Calibrated gauge with gauge adaptor plus cylinder and pump

122


Pump & Cylinders

HYHYDDRRAAUULLIC PIC PUUMP LMP LOOW CW CYYLL. S. SEETT

Single acting, low height cylinders and hand pumps.

Features

• Ideal where space is restricted

• The quickest and easiest way to start working right away

• Optimum match of individual components

• All sets are ready-for-use

• All hand pumps are two-speed



615004 HYD.PMP LOW CYL.SET,20T

615005 HYD.PMP LOW CYL.SET,30T

Supplied with:

1.8 m safety hose

Calibrated gauge with gauge adaptor plus cylinder pump

123


Pump & Cylinders

HYHYDDRRAAUULLIC CIC CYYLLINDINDEERR

Single acting, general purpose cylinders.

Features

• The industry standard general purpose cylinder

• Collar threads, plunger threads and base mounting holes enable easy fixturing (on most models)

• Designed for use in all positions

• High strength alloy steel for durability

• Heavy duty return springs

• Baked enamel finish for increased corrosion resistance



615006 HYD.CYL,5T,110MM

615007 HYD.CYL,5T,165MM

615009 HYD.CYL,10T,121MM

615010 HYD.CYL,10T,171MM

615012 HYD.CYL,15T,149MM

615013 HYD.CYL,15T,200MM

615014 HYD.CYL,15T,271MM

615015 HYD.CYL,25T,165MM

615016 HYD.CYL,25T,215MM

696131 HYD.CYL,50T SINGLE-ACT STD.CYL.

124


Pump & Cylinders

HYHYDDRRAAUULLIC CIC CYYLLINDINDEERRSS

Single acting, flat-jac cylinders.

Features

• Compact, flat design for use where most other cylinders will not fit

• Mounting holes enable easy fixturing


• Coupler and dust cap included on all models

• Hard chrome plated high quality steel plungers

• Grooved plunger ends require no saddle



615017 HYD.CYL,5T,32MM

615018 HYD.CYL,10T,42MM

615019 HYD.CYL,20T,51MM

615020 HYD.CYL,30T,58MM

696147 HYDRAULIC CYLINDER, 45T

HYHYDDRRAAUULLIC PIC PUUMP EMP ELLEECCTTRRIC 230VIC 230VAACC

441 615035

Single acting, economy pump.

Features

• Light-weight and compact design

• Large easy-carry handle for maximum portability

• Two-speed operation reduces cycle times for improved productivity

• 230 VAC 50/60-cycle universal motor will operate on voltages as low as 115 V

• 24 VDC remote motor control, 3 m length for operator safety

• Starts under full load

Technical data

Weight 10 kg

125


Pump & Cylinders

HYHYDDRRAAUULLIC PIC PUUMPMP, A, AIR RIR ROOPPEERR, MA, MAX 7X 700B00BAARR

441 615038

Hydraulic pump, air roper.

Features

• Single acting

• Easily operated by hand or foot

• Turbo feature utilizes exhaust air to help power the pump, developing 700 bar hydraulic pressure with only 5,5 bar air

pressure

• Patented “air saver” feature for lower air consumption and lower operating costs

• Air exhaust muffler for quieter operation and reduce operator fatigue

return-to-tank port for use in remote valve applications

• Air and oil inlet filters for reduced risk of damage from contamination

• Extensive use of engineered plastics for light weight, corrosion resistance and durability

• Internal pressure relief valve for overload protection

Technical data

Usable oil capacity 2081 cm3

Pressure Rating 700 bar

Weight 6,4 kg

Air pressure range 2.7-10.3 bar

Air consumption 340 L/min

Air inlet size 1/4" female

Hydraulic outlet size 3/8" female

Accessories


615038 HYD.PMP,AIROPER,MAX700BAR

126


Pump & Cylinders

HYHYDDRRAAUULLIC CIC CYYLLINDINDEERR, 50T, 50T

441 696139

Single acting, flat-jac cylinders.

Features

• Compact flat design for use where most other cylinders will not fit

• Mounting holes enable easy fixturing


• Coupler and dust cap included on all models

• Hard chrome plated high quality steel plungers

• Grooved plunger ends require no saddle

Technical data

Cylinder capacity ton (kN) 50 (498)

Collapsed height 278 mm

Stroke 153 mm

Weight 14,3 kg


Supplied with: Female quick coupling (socket)

127


Pump & Cylinders

HYHYDDRRAAUULLIC HAIC HAND PND PUUMPMP, MA, MAX 7X 700 B00 BAARR

441 615027

Features

• Light-weight

• Two-speed operation reduces handle strokes by as much as 78% over single speed pumps

• Handle lock and light weight construction for easy carrying

• Non-conductive fiberglass handle for operator safety

• Lower handle effort to minimize operator fatigue

• Durable glass-filled nylon reservoir and nylon encapsulated aluminium pump base for maximum corrosion resistance

Technical data

Usable oil capacity 901 cm3

Pressure rating 700 bar

Maximum handle effort 42,2 kg

Weight 4.1 kg

Outlet port size 3/8" female

128

MAMARRINE PINE PRROODDUUCCTTSS Accessories & Spares Hydraulic Equipment

Accessories for Hydraulic Equipment

GGAAUUGGEE, HY, HYDDRRAAUULLICIC

441 615037

For use with electric pump. Minimize the risk of overloading and ensure long, dependable service from

your equipment.

Technical data

Range 0-700 bar

Size 63 mm

Thread lower mount 1/4 NPFT

RREEGGUULLAATTOORR-F-FILILTTEERR-L-LUUBBEE

441 615039

For turbo air hydraulic pump. Recommended for use with air pump.

Features

• Provides clean, lubricated air

• Allows for air pressure adjustment

• Steel bowl guards are standard



615038 HYD.PMP,AIROPER,MAX700BAR

129



TTEENSNSIOION MEN METTEERR, C, CAAPP. 4.. 4.5 T5 T

441 615040

Features

• Direct mounted

• Accuracy ±2% of full scale

• Zinc and bronze plated to resist corrosion

• Dual-range readout in kilograms and pounds

• Cushioned metal case provides safe storage and transport

Technical data

Gauge capacity 4500 kg

Minimum reading 500 kg

Gauge increments 100 kg

HYHYDDRRAAUULLIC CIC CUUTTTTEER HER HEAADD, C, CAAPP. 20 T. 20 T

441 615045

Features

• Single-acting spring return

• Guillotine action for easy operation

• Lifting handle on large model for easy transport

• Carrying bag included for easy carrying and tool protection

Technical data

CapacityTon 20

Length 279 mm

Oil capacity 134,4 cm3

Max cutting capacity 31 mm

Weight 11,3 kg

130

RREEPPLLAACCEEMEMENT BNT BLLAADDEE

441 615047

Replacement blade for cutter heads.



615045 HYD.CUTTER HEAD,CAP.20T

HYHYDDRRAAUULLIC HOIC HOSSE FE FOOR HIGR HIGH PH PRREESSSSUURREE

Hydraulic hose for high pressure. For cylinders used for demanding applications.

Features

• 4:1 design factor

• Maximum working pressure of 700 bar

• Four layer design, including two high strength steel wire braids

• Outside jacket is polyurethane, to provide maximum abrasion resistance

• Exhibits low volumetric expansion under pressure to enhance overall system efficiency

• Crimped-on rubber strain relief for improved life and durability.

• Hose oil capacity



615057 HYD. HOSE/HIGH PRES. 1,8M

615058 HYD. HOSE/HIGH PRES. 3,0M

HYHYDDRRAAUULLIC CIC COOUUPPLLEERR

Type 1 - 3/8 high flow couplers C-604 Unitor standard equipment on most cylinders. Recommended

for use on all Unitor pumps and cylinders where space and porting permits. Includes "2-in-1" dust cap

for use on male and female coupler halves.



615060 HYD. COUPLER COMPLETE SET

615061 HYD. COUPLER FEMALE HALF

615062 HYD. COUPLER MALE HALF

131



FFITITTTINGINGS - AS - ADDAAPPTTOORR, HE, HEXXAAGGOON NIPN NIPPPLLEE,,CCOOUUPPLLINGING, C, CRROOSSSS, T, TEEE & RE & REEDDUUCCEERR

Recommended tubing

Unitor does not supply high-pressure pipe or tubing, but

recommends the use of cold drawn steel tubing instead of

regular pipe in the following dimensions:

• In place of .25’’ pipe, use 13 mm O.D x 11 ga. (3

mm) wall

• In place of .38’’ pipe, use 9 mm schedule 80

seamless pipe

• In place of .50’’ pipe, use 21 mm O.D x 4 mm wall

This tubing can be threaded with standard pipe threading

dies.



615087 FITTING,ADAPT.G1/4-1/4




615091 FITTING,ADAPT.M14X1,5-3/8

615092 FITTING,ADAPT.3/8-3/8



615074 FITTING,HEX.NIPPLE,38MM

615075 FITTING,HEX.NIPPLE,51MM

615077 FITTING,COUPLING,3/8-3/8

615079 FITTING,CROSS,3/8-3/8

615080 FITTING,TEE,3/8-3/8

615085 FITTING,REDUCER,1/4-1/2

615086 FITTING,REDUCER,3/8-G3/8

132



GGAAUUGGEE, HY, HYDDRRAAUULLIC PIC PRREESSSSUURREE



615095 GAUGE,HYD.PRES.0-700BAR










VVAALLVVEE, F, FLLOOW CW COONTNTRROOLL

All valves are rated for 700 bar operating pressure. All valves feature NPTF porting to insure against

leakage at rated pressure. All valves are painted, coated, or plated for corrosion resistance. To control

cylinder speed. Can also be used as shut-off valve for temporary load holding.



615128 VALVE,FLOW CONTR.3/8NPTF

615129 VALVE,FLOW CONTR.1/4NPTF

133

�� 1�� !" "# "�� ) /0$ �� %��& �'��1&��$�(��)�'*

�� 1�� !" "# "�� ) /0$ �� %��& �'��1&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING




CLEANING EQUIPMENT

Whatever a vessel’s size, be it a small to medium bulk carrier or a Panamax tanker, WSS has a range of mobile high pressure cleaners to suit every job. Our professional vacuum cleaners, heavy duty cargo hold cleaning kits, mucking pumps and cleaning jets are available alongside a wide range of spare parts and accessories.

All WSS cleaning equipment, parts and accessories are compliant with local regulations and meet international standards. They are supported by our global network and 24/7 service technicians.

MAMARRINE PINE PRROODDUUCCTTSS Mobile High Pressure Cleaners

HP Cleaners 150 - 220 bar

HIGHIGH PH PRREESSSSUURRE CE CLLEEAANINGNING

What is high pressure cleaning?

High pressure cleaning is an effective and economical

method of removing dirt and contaminants. Using high

pressure cleaning, it is possible to clean in inaccessible

places where cleaning would otherwise be impossible or

costly and time consuming.

Choosing the right high pressure cleaner

A high pressure cleaner should be selected on the basis of

the jobs it needs to carry out. Depending on the type of dirt,

surface, working method etc., users can choose between

cold water cleaners, hot water cleaners, stationary units and

detergents and accessories. The two main factors are

required cleaning impact and intensity of use.

Cleaning impact

Cleaning impact reflects the cleaning efficiency of the unit.

The higher the number given, the more time efficient the unit

is. Unitor products are named using this number system in

order to simplify selection of the correct unit. The cleaning

impact calculation is a formula developed by the industry to

describe the combination of waterflow and pressure and

their combined effect on the surface.

Intensity of use

Intensity of use is related to the durability of the unit; this

does not mean that some of our units are inferior products,

but that they are simply designed for different applications. A

choice has to be made based on the intended use on board.

If the unit will be used for heavy duty cleaning of cargo holds

or tanks, high intensity units should be used. However, if the

machine is to be used for spot cleaning on deck, there is no

need for a unit that is designed to run for 8 hours every day.

Why unitor cleaners?

WSS offers a wide range of high pressure cleaners that meet

most requirements and the large range of accessories and

detergents available makes them easy to use. The cleaners

are designed to satisfy user demands and to suit various

tasks.

WSS global network service back up

In most cases, WSS’s global network offers a complete

after-sales service package on high pressure cleaners. This

includes service and repair and supply of spare parts and

accessories, as well as professional advice on various

maritime cleaning operations.

Safety notes

Careless use of a high pressure cleaner may result in serious

damage or injury. Users should turn the machine off and lock

the gun handle when leaving the cleaner. Never direct the jet

straight at people, animals or electrical installations. Read

and follow the directions in the instruction manual carefully

before using the machine for the first time.

Increased maintenance efficiency

Why clean on board? Because a clean ship is a safer ship, a

ship which is more efficient, and more pleasant to work on

and to live in. Keeping a ship clean by conventional methods

can be time consuming and inefficient, which is why it is

often given low priority. Modern high pressure cleaning

equipment solves these problems: cleaning with a water jet

of up to 300 bar pressure is fast, efficient and thorough.

Reducing time spent on individual cleaning jobs by 70 –

80% means increased cleaning economy, onboard

efficiency, and ultimately, money saved.

General cleaning

All-purpose cleaning is done with a jet spray with up to 200

bar pressure. This method eases cleaning of hard to reach

places, and gets into hidden corners which might normally

be ignored, removing dirt and contaminants that could

contain moisture which create rust attacks on the metal

underneath the thickest paint.

Engine room cleaning

Using pre-heated water (up to 85°) or adding solvents and

other chemicals will result in cleaning power that cuts

through oil and grease in engine rooms - at pressures high

enough to flush out dirt from corners and from behind pipes.

Clean machinery is easier to operate and easier to service.

136

Efficient paint removal

Add a sand lance and a sand injector to a standard Unitor

cleaner and you have converted it to the most superior

instrument for removing rust or paint - a water sand blaster.

On flat or curved surfaces, there is no other method more

efficient.

Thorough disinfection

Another efficient use for the Unitor cleaner is to incorporate a

disinfecting foam which is sprayed onto surfaces and sticks

to them for up to 30 minutes. It´s guaranteed to get into

corners and behind shelves, leaving food storage rooms

spotless.

The importance of detergents in high pressure

cleaning

High pressure cleaning efficiency can be improved by using

the correct detergents in correct dosages. Using a high

pressure cleaner alone, without any detergent, will not

achieve optimal cleaning results. High-pressure cleaning

primarily refers to cleaning of hard surfaces, such as decks,

tanks, engine-rooms etc. and in the majority of cases,

cleaning is done according to the two-step method:

Step 1: Spray the detergent over the area to be cleaned

Step 2: Wash down the area using a high pressure water jet

After the detergent has been sprayed on the surface and

before the wash down begins, the detergent penetrates and

thoroughly moistens dirt and other grime. During wash

down, the proper detergent thoroughly dissolves the

particles of dirt, including oil and fat, in the water spray and

thus achieves optimal cleaning results. In addition to being

more effective, the use of proper detergents substantially

reduces the time required for the cleaning operation, as well

as preventing dirt from reforming on the surface.

3 Pieces of good advice

• Apply detergent on dry surfaces where possible. A

dry surface will absorb detergent far better than a wet

surface.

• When applying detergent on vertical surfaces: start

application from the bottom and work upwards. By

beginning from the top and going downwards, the

detergent may produce ‘channels’ down the surface,

and run off it too quickly.

• During high pressure cleaning, it is important that the

rinsing water does not run over uncleaned surfaces.

The rinsing water can draw soap from the surface if

running over non-cleaned surfaces. High pressure

together with optimum concentration of detergent will

give the best effect. There are several Unitor

chemicals which are suitable for use together with

Unitor high pressure cleaners. Detergent is mixed into

the water at a pre-set dosage through the cleaner's

chemical injector (built in or detachable).

137



HP CHP CLLEEAANENER HPR HPC 30C 30, 1X, 1X220 V220 V//60 HZ60 HZ

430 729327

Compact and light high pressure cleaner for

marine use. Ideal for small and random spot

cleaning on board. Can be used where electrical

power is limited. Ideal for use as an extra

machine or in areas where space is limited and

larger machines are not appropriate.

Features

• Axial pump

• Stainless steel pistons

• Chemical dosing

Benefits

• Light and compact - easy to transport

• Fast to connect - saves time

• Ideal for areas with limited space

• Ergonomic design - improves work capabilitites

Technical data

Pressure 150 bar

Water flow 660 l/h

Power, rated 3.5

Voltage 220 V

Electric cycles 60 Hz

HP Cleaner HPC 30 is compact and has a light weight

design that facilitates storage and transport. Also comes

with large wheels, is rubber coated, has good stability and

transport possibilities. Has an adjustable transport handle

where the handle can be adjusted to ease storage and

transport of the machine. Comes with 3 stainless steel

piston pump, long life pump for light everyday applications.

Has an internal chemical injector, no need for external

injector, simplifying the cleaning process. The use of

detergents is determined directly from the lance, simplifying

the operation. Holder for detergent container that holds 5 L

containers makes it easy to move the unit during operations.

The handle features storage for cable and hose enhances

mobility. The built in lance holder provides ideal storage and

protects lance from damage.


Supplied with:

• Tornado lance

• Spray handle 3000

• Quick couplings

• 10 m HP hose

138

Accessories


662197 DOUBLE LANCE 200CM WITH 05 NOZZLE

621813 DRAIN CLEANER, COMPLETE

545335 FOAM INJECTOR DETACHABLE

545343 FOAM LANCE 120CM LONG





621896 HOSE CART, MOBILE


621938 LONG REACH LANCE

671800 HEAVY DUTY HOSE, BLUE 10M




659128 POWERSPEED LANCE WITH 06 NOZZLE

662213 ROTARY BRUSH 170CM WITH 05 NOZZLE


665158 ERGO 3000 SPRAY GUN

577379 STAINL.ST. CLEAN. TROLLEY

659110 TORNADO LANCE 92CM WITH 06 NOZZLE


662189 UNIVERSAL 3000 LANCE 05 NOZZLE

565861 RUBBER NOZZLE F/VSB 300

Approvals

CE

139



HP CHP CLLEEAANENER HPR HPCC54 200 B54 200 BAARR, 3X, 3X220-220-380 V380 V//50 HZ50 HZ

430 662247

HPC54 high pressure cleaner is your ideal

partner for cold water cleaning on board. High

performance, unbeatable ergonomics, low noise

levels and easy servicing make this a unique

pressure washer.

Features

• Robust unit

• Low RPM for reduced noise and longer life span

• Dual voltage - changeable by switch

• 3 ceramic piston pump ensures smooth and

problem-free use

Benefits

• Economic, all purpose high pressure cleaner

• Effectively removes dirt

• Compact and easy to store

• Solves smaller cleaning jobs with ease

Technical data


Pressure 200 bar

Voltage 400 V

Inlet temperature 60º C

Water flow 1030 l/h

Chassis and frame in steel – robust unit, resistant to

shock and vibration, the frame protects the motor pump

from accidental damage.

Steel lifting grips – some strategic parts of the frame are

not covered by the shell, this makes the unit easier to lift and

carry.

2 sturdy wheels – the unit is stable and easy to move due

to its size of wheels.

New plunger pump – the unit is based on a new type

pump operating at 1450 RPM. This gives the unit a longer

life span and reduces the noise.

Ceramic pistons - ensure smooth and problem free use

and prolong the lifetime of the unit. Induction motor ensures

longer lifespan.

Fully enclosed oil system – ensures stable quality of the

lubricant and contamination free operation.

Patented flow regulation – the unit can be adjusted to suit

all applications according to the task and material being

cleaned.

Brass pump – brass pump housing ensures longer lifetime.

Built in chemical injector – simplifies cleaning operations

and increases the units cleaning efficiency.

140


Supplied with:

• Universal 3000 lance


• Quick couplings

• 10 m HP hose

Accessories


545319 CHEM. INJECTOR DETACHABLE
























545640 SUCTION HOSE&ROD F/VSB300

546044 WASHING BRUSH 235CM LONG

Approvals

CE

141



HP CHP CLLEEAANENER HPR HPCC54 200 B54 200 BAARR, 3X, 3X220-220-440 V440 V/ 60 HZ/ 60 HZ

430 662239

The HPC54 high pressure cleaner is specifically

suited to cold water cleaning on board. High

performance, unbeatable ergonomics, low noise

levels and easy servicing.

Features

• Robust unit

• Low RPM for reduced noise and longer life span


• 3 ceramic piston pump to ensure smooth and

problem-free use

Benefits

• Economic all purpose high pressure cleaner



• Solves smaller cleaning jobs with ease

Technical data

Pressure 200 bar

Water flow 1030 l/h

Inlet temperature 60 ºC

Voltage 440-220 V





Steel lifting grips – some strategic parts of the frame are

not covered by the shell, this makes the unit easier to lift and

carry.



New plunger pump – the unit is based on a new type

pump operating at 1450 RPM. This gives the unit a longer

life span and reduces the noise.

Ceramic pistons- ensure smooth and problem free use

and prolong the lifetime of the unit. Induction motor ensure

longer lifespan.

Fully enclosed oil system – ensures stable quality of the

lubricant and contamination free operation.



cleaned.

Brass pump – brass pump housing ensures longer lifetime.



142


Supplied with:

• Universal 3000 lance


• Quick couplings

• 10 m HP hose

Accessories



























Approvals

CE

143



HP CHP CLLEEAANENER HPR HPCC62 220 B62 220 BAARR, 220-, 220-440 V440 V//60 HZ60 HZ

430 659136

The HP62 high pressure cleaner is specifically suited to cold water cleaning on board. High

performance, unbeatable ergonomics, low noise levels and easy servicing.

Features

• Robust unit

• Low RPM for reduced noise and longer lifespan


• 3 ceramic piston pump ensures smooth and problem free use

Benefits

• Economic all purpose high pressure cleaner



• Ideally suited to small cleaning tasks

Technical data

Pressure 220 bar

Water flow 1130 l/h


Voltage 440-220 V


Chassis and frame of steel – robust unit, resistant to



Steel lifting grips - make the unit easier to lift and carry.



Ceramic pistons - ensure smooth and problem free use

and prolong the lifetime of the unit.

Induction motor ensures longer lifespan.

Fully enclosed oil system – ensures contamination-free

operation and stable quality of the lubricant.



cleaned.

Brass pump & brass pump housing – ensure longer

lifetime




Supplied with:

• Tornado lance


• Quick couplings

• 10 m HP hose

144

Accessories



546150 DOUBLE LANCE 2OOCM LONG
















545277 ROTARY BRUSH 170CM LONG


565853 LANCE F/VSB 300 03K





545434 DOUBLE LANCE 10CM LONG

682070 UNIVERSAL.3000 LANCE 06 NOZZLE



Approvals

CE

145




430 652586

The Unitor HPC66 is a heavy duty high pressure

cleaner designed for martime use and is ideally

suited to the toughest general cleaning tasks

onboard. The machine is designed for

continuous use and running comfortably due to

its 4 ceramic piston pump and pump at 1750

RPM. It is highly recommended for long term

reliable use.

Features


• High mobility and ergonomic design

• 4 ceramic piston pump – ensures longer life of the

unit

• Up to 85 ºC inlet water

Benefits

• Effectively removes intense dirt

• Reduces cleaning time

• Reduces water consumption

• Designed for intense applications over 8 hours, every day

Technical data

Pressure 190

Water flow 1280 l/h


Voltage 440-220 V





4 ceramic piston pump – ensures longer life of the unit,

designed for intense applications over 8 hour every day.

Induction motor ensure longer lifespan.

High pressure and high water volume – efficient and

quick cleaning, optimal solution for incrusted dirt and scale

combined with high flushing effect for loose water.

Up to 85 ºC inlet water – makes it possible to handle the

most demanding cleaning tasks, ideal for cleaning grease

and oil residue.

Hose hook on the handle – enhanced mobility with easy

storage of hose and power supply cable.

Lance holder – two built in holders protect the lances from

damage when in transport or storage, makes lance changes

easy.

3 step start/stop – possibility of using the unit with an

automatic or a manual start stop, the manual option is ideal

when using a suction hose from a tank. The automatic stop

setting will turn the pump off after 20 seconds of inactivity.

It is fitted with a brake on the front wheel.

146


Supplied with:

• Tornado lance


• Quick coupling

• 10 m HP hose

• 8 m electric cable (without socket).

The water inlet quick coupling with a 3/4" hose socket is

supplied, hence the only thing not included to operate the

machine is the 3/4" inlet hose.

Accessories



671792 HEAVY DUTY DECK HOSE 25M



















658237 SAND FILTER COMPLETE FOR HPC66

565853 LANCE F/VSB 300 03K









Approvals

CE

147




430 652594

The Unitor HPC66 is a heavy duty high pressure

cleaner designed for martime use and is ideally

suited to the toughest general cleaning tasks

onboard. The machine is designed for

continuous use and runs comfortably due to its

4 ceramic piston pump and pump at 1450

RPM. Highly recommended for long time

reliable use.

Features

• Low RPM

• High mobility and ergonomic design

• 4 ceramic piston pump – ensures longer life of the

unit

• Up to 85 ºC inlet water

Technical data

Pressure 190 bar


Water flow 1280 l/h

Voltage 400-220 V


Benefits

• Effectively removes intense dirt

• Reduces cleaning time

• Reduces water consumption

• Designed for intense applications over 8 hours, every

day


Supplied with:

• Tornado lance


• Quick coupling

• 10 m HP hose

• 8 m electric cable (without socket)

The water inlet quick coupling with a 3/4" hose socket is

supplied, hence the only thing not included to operate the

machine is the 3/4" inlet hose.

Approvals

CE

148


Spares/Accessories - Cold Water HP Cleaners 150 - 220

DDEECCK HOK HOSSE LE LOOW FW FRRICICTTIOION 25 MN 25 M

436 671792

Features

• The hose is tailor-made to reduce friction on the

hose by drag and wear

Benefits

• With the low friction hose your hoses will last longer

due to less drag and wear

Fits all models from HPC 30 until HPC 66 (not air driven).

149



HEHEAAVVY DY DUUTTY HOY HOSSE 10 ME 10 M

436 586776

Benefits

• The hose is flexible and therefore easy for you to use

when cleaning

Technical data

ID in 3/8

ID mm 9,5

OD mm 15,6

Max WP 250 bar

Min BP 625 bar

Min BR 90 mm

Weight (approx) 0,256 kg/m

Fits all high pressure cleaners from HPC 30 to HPC 66. Not

suitable for Airdriven or HPC Extreme.

Internal hose: Synthetic rubber, extruded whole joints, of

uniform thickness

Reinforcement: 1 high tensile steel wire braids

External covering: Anti-abrasive synthetic rubber, resistant to

oils, fuels and atmospheric condtions

Operating temperature range: from +5°C to 135°C / 155°

intermittently

Approvals

Exceeds EN 857 1SC - ISO 7751

150




436 586792

Benefits

• The hose is flexible and easy to use when cleaning

Technical data

ID in 3/8

ID mm 9,5

OD mm 15,6

Max WP 250 bar

Min BP 625 bar

Min BR 90 mm





uniform thickness




Operating temperature range: from +5 °C to 135 °C / 155°

intermittently

Approvals


151




436 586784

The 25 m heavy duty hose is a high pressure

hose suitable for all Unitor high pressure

cleaners between 150 and 220 bar.

Benefits

• The hose is flexible and easy to use when cleaning

Technical data

ID in 3/8

ID mm 9,5

OD mm 15,6

Max WP 250 bar

Min BP 625 bar

Min BR 90 mm





uniform thickness




Operating temperature range: from +5°C to 135°C / 155°

intermittently

Approvals

Exceed EN 857 1SC - ISO 7751

152



NONON BN BLLAACCKKEENING HONING HOSSE 10 ME 10 M

436 671800

The non-blackening hose is suitable for working

pressure up to 250 bar. DN 10. 3/8". The hose

does not leave any blackening on deck. Ideal for

cruise ships, ferries, pool areas or galleys where

a spotless surface is essential.

Features

• Max 155 °C

• Max working pressure 250 bar

• Burst pressure 650 bar

• Non-blackening

Benefits

• Ideal for hot (up to 155 °C) and cold water

• Ideal for working pressure up to 250 bar

• No blackening of surfaces from hose

Technical data

ID in 3/8

ID mm 9,5

OD mm 15,6

Max WP 250 bar

Min BP 625 bar

Min BR 90 mm





uniform thickness





intermittently

Approvals


153

NONON BN BLLAACCKKEENING HONING HOSSE 25 ME 25 M

436 671818

The non-blackening hose is suitable for working

pressure up to 250 bar. DN 10. 3/8". The hose

does not leave any blackening on deck. Ideal for

cruise ships, ferries, pool areas or galleys where

a spotless surface is essential.

Features

• Max 155 °C

• Max working pressure 250 bar

• Burst pressure 650 bar

• Non-blackening

Benefits

• No blackening of your surfaces from the hose

• Ideal for hot (up to 155 °C) and cold water

• The hose is flexible and therefore easy for you to use when cleaning

Technical data

ID in 3/8

ID mm 9,5

OD mm 15,6

Max WP 250 bar

Min BP 625 bar

Min BR 90 mm







uniform thickness





intermittently

Approvals

Exceed EN 857 1SC - ISO 7751

154



CCHEHEMICMICAAL INJL INJEECCTTOORR

436 545319

The chemical injector is ideal for applying and

dosing cleaning chemicals. Chemical injector is

connected to the pressure side of the machine.

Equiped with knob to regulate dosing. Can be

connected to HPC 66, HPC 62, Uno and Duo

Booster and Solar Booster.

Accessories are tailor-made to suit the individual pumps.

Use the model number to identify the correct accessories.

DDOOUUBBLLE LE LAANCNCE 200 CE 200 CMM

436 546150

Double lance - 200 cm

Technical data

Length: 2000 mm

Width: 100 mm

Height: 100 mm

Weight: 5 kg

The accessories are tailor-made to suit the individual pumps.


155



DDRRAAIN CIN CLLEEAANENER CR COOMPMPLLEETTE KE KIT WIT WITITH 20 M HOH 20 M HOSSEE

436 621813

For internal cleaning of blocked pipes.

Connects directly to spray handle by quick

coupling (included).

The accessories are tailor-made to suit the

individual pumps. Use the model number to

identify the correct accessories.

FFOOAAM INJM INJEECCTTOORR

436 545335

Foam injector in galvanized steel. 30 cm

extension hose with ergo coupling. The foam

injector is connected to the pressure side of the

machine.

Features

• Creates rich foam

• Regulator for chemical dosing

Benefits

• Allows foam to stick to vertical surfaces more easily

• Allows the operator to idenitfy areas where chemicals have been applied



156



FFOOAAM LM LAANCNCEE

436 545343

The foam lance creates rich foam. Equipped

with handle for improved ergonomic use.

Features

• Ergonomic

• Creates rich foam

Benefits

• Enables foam to stick easily to vertical surfaces

• Allows the operator to easily identify where chemicals

have been applied

Technical data

Length: 1200 mm

Width: 200 mm

Height: 70 mm

Weight: 3 kg

These accessories are tailor-made to suit the individual

pumps. Use the model number to identify the correct

accessories.

HOHOSSE QE QUUICICK CK COOUUPPLLING SING SEETT

436 546036

Technical data

Length: 50 mm

Diameter: 50 mm



157



HP EHP EXXTTEENDNDAABBLLE LE LAANCNCE 5.E 5.5 M5 M

436 659151

The Unitor 5.5 m lance has been developed in

order to enable chemical application above the

normal reach of any standard pump.

The lance has 3 telescopic tubes which, when extended,

slide out to a full length of 5.5 m. Inside the sliding tubes the

fluid is transported using a 3/8" hose which starts at the

trigger and exits at the end of the lance in a quick connector.

The quick connector enables rapid changing of the nozzle

according to the task at hand; 25 for high volume or 0 for

spot cleaning. The lance can be used with both the 10:1

and the smallest 2:1 chemical pumps as well as the high

pressure cleaners.

Typical set up

Pump > Hose quick connector M & F > Heavy duty hose >

Hose quick connector F & M > 5.5 m lance > 25 nozzle

NONOZZZZLLE 06E 06/25 F/25 FOOR ER EXXTTEENDNDAABBLLE LE LAANCNCEE

436 718577

Nozzle 06/25 for extendable lance. Nozze for use with Unitor HPC 66, HPC 62, HPCH 53 and

stationary systems.



158



SSTTAAINLINLEESSS SS STTEEEEL CL CLLEEAANING TNING TRROOLLLLEEYY

436 577379

The unit is supplied with injectorand hose reel (no hose,

lance or 25 L containers).

RROOTTAARRY BY BRRUUSSH 80 CH 80 CMM

436 545251



159



RROOTTAARRY BY BRRUUSSH 17H 170 C0 CMM

436 545277



SSPPRRAAY HAY HANDNDLLE 3000E 3000

436 665158



160



TTOORRNANADDO SO SHOHORRT LT LAANCNCE 10 CE 10 CMM

436 545434

The tornado short lance is speciifcally suited to

cleaning in areas where space is limited.

Technical data

Length: 100 mm

Width: 100 mm

Height: 100 mm

Weight: 1 kg

Benefits

• Enables cleaning in narrow areas with limited space



TTOORRNANADDO NOO NORRMAMAL LL LAANCNCE 9E 92 C2 CMM

436 636159

For use with Unitor HPC 30.

Accessories are tailor-made tosuit the individual pumps. Use

the model number to identify the correct accessories.

161



PPOOWWEERRSSPPEEEED LD LAANCNCEE

436 659128

Technical data

Length: 1000 mm

Width: 100 mm

Height: 100 mm

Weight: 4 kg



TTOORRNANADDO NOO NORRMAMAL LL LAANCNCE 104 CE 104 CMM

436 662163

For use with Unitor HPC 54.



162



NONOZZZZLLE 05E 05/25 D/25 DEEGGRREEE FE FOOR ER EXXTTEENDNDAABBLLE LE LAANCNCEE

436 718585

Nozzle for use with Unitor HPC 54.



NONOZZZZLLE 06E 06//0 D0 DEEGGRREEE FE FOOR ER EXXTTAANDNDAABBLLE LE LAANCNCEE

436 718593

For use with Unitor HPC 66, HPC 62, HPCH 53 and stationary systems.



NONOZZZZLLE 05E 05//0 D0 DEEGGRREEE FE FOOR ER EXXTTEENDNDAABBLLE LE LAANCNCEE

436 718601

For use with HPC 54.



163



UUNIVNIVEERRSSAAL 3000 LL 3000 LAANCNCEE

436 662189

For use with Unitor HPC 54



WWAASSHING BHING BRRUUSSH 23H 235 C5 CMM

436 546044

Technical data

Length: 2350 mm

Width: 500 mm

Height: 200 mm

Weight: 6 kg



164


Hot Water HP Cleaners

HP CHP CLLEEAANENER HPR HPCCH5H53 HW3 HW, 200 B, 200 BAAR 60 HZR 60 HZ

430 665174

The Unitor HPCH53 is a high-pressure cleaner with electric motor and diesel burner to deliver constant

hot water. Cleaning with hot water can reduce both chemical consumption and cleaning time

significantly.

Features

• Chassis and frame in steel

• Broad large rubber wheels and brakes on rear wheel

• 4 ceramic piston pump unit runs on 1450 RPM

• Eco power – boiler system designed to be clean and fuel efficient -compliant with EN303-2 directive

• Built-in detergent tank and an internal injector

• Information and control panel – all functions and service information displayed

Benefits

• Mobile and robust unit, resistant to shock and vibration

• Easy and quick to service

• Longer lifespan and lower noise emission

• Reduction in cleaning time and use of chemicals

• Reduced emissions

• Easy to transport and operate

Technical data

Pressure 200 bar

Water flow 1080 l/h


Voltage 440-220 V



Supplied with:

• Tornado lance


• Quick couplings

• 10 m H.P.hose

165

Accessories




















565853 LANCE F/VSB 300 03K









166


Spares & Accessories for Hot HP Cleaners

RROOTTAARRY BY BRRUUSSH 80 CH 80 CMM

436 545251

RREEPPAAIR KIR KIT SIT SAAFFEETTY VY VAALLVVE HPE HPCCH5H53&3&SSOOLLAARR

436 709931

RREEPPAAIR KIR KIT BIT BYYPPAASSS VS VAALLVVE FE FOOR HPR HPCCH5H533

436 709949

167



HP CHP CLLEEAANENER HPR HPCCEE330 310 B330 310 BAARR, 3X, 3X440440/60 HZ/60 HZ

437 720987

Extreme high pressure – removes dirt and rust

quickly and efficiently. Ideal for the toughest jobs

on board. Low RPM motor and heavy duty unit

constructed for the toughest cleaning and

surface application. Heavy duty steel frame

protects the unit and enables lifting with a

crane.

Features

• Four wheels with break – the units can be moved

with ease and can be stored safely

• Built-in inlet filter – protects the pump from damage

• Well proven pump – the pump design is based on years of experience and development

Technical data

Pressure 310 bar

Water flow 1320 l/h


Voltage 440 V


Benefits

• Long lifetime and reliable operation

• Versatile – the units can be used for paint and scale

removal as well as day to day cleaning task

• Efficient – with the sandblasting nozzle the unit can

prepare up to 10 m2/h of surface for painting Surface

quality of SA 2.5


Supplied with: Sand filter, 1O meter HP hose, spray handle

and lance.

Accessories


721365 EXTREME HIGH PRESSURE HOSE 10M


721183 POWERSPEED ROTARY NZZL EXTREME 330

721167 SANDBLASTING EXTREME PACK 330 - 405

729229 REP.KIT SEALS FOR HPC EXTREME 330

729228 REP.KIT VALVES FOR HPC EXTREME 330

Approvals

CE

168

HP CHP CLLEEAANENER HPR HPCCEE405 385 B405 385 BAARR, 3X, 3X440 V440 V//60 HZ60 HZ

437 721001


fast and efficiently. Ideal for toughest jobs on

board. Low RPM motor and heavy duty unit

constructed for the toughest cleaning and


protects the unit and enables lifting with cranes.

Features

• Four wheels with brake– the units can be moved with

ease and can be stored safely


• Well proven pump – the pump design is based on

years of experience and development

Technical data

Working pressure 405 bar

Water flow 1320 l/h


Voltage 440 V


Benefits






quality of SA 2.5


Supplied with: Sand filter, 10 meter HP hose, spray handle

and lance.

Accessories





721167 SANDBLASTING EXTREME PACK 330 - 405

729233 REP KIT VALVES FOR HPC EXTREME 405

728923 REP.KIT FOR POWERSPEED FOR HPCE 405

Approvals

CE

169

HP CHP CLLEEAANENER HPR HPCCEE5520 500 B20 500 BAARR, 3X, 3X440 V440 V//60 HZ60 HZ

437 721035


quickly and efficiently. Ideal for thougest jobs on

board. Low RPM motor and heavy duty unit

constructed for the thougest cleaning and


protects the unit and enables lifting with a

crane.

Features

• Four wheels with brake – the units can be moved

with ease and can be stored safely



Technical data


Water flow 1020 l/h


Voltage 440 V

Electric Cycles 60 Hz

Benefits






quality of SA 2.5



and lance.

Accessories





721175 SANDBLASTING EXTREME PACK 520

729239 REP.KIT SEALS FOR HPC EXTREME 520

728915 REP.KIT FOR POWERSPEED FOR HPCE 520

Approvals

CE

170

HP CHP CLLEEAANENER HPR HPCCEE5520 HIG20 HIGH FH FLLOOW 500 BW 500 BAARR,,3X3X440V440V/60 HZ/60 HZ

437 721068

The HPCE 520 High Flow is a power back and a heavy duty high pressure cleaner. It removes dirt and

rust quickly and efficiently. Ideal for thougest jobs on board. Low RPM motor and heavy duty unit

constructed for the thougest cleaning and surface application. Heavy duty steel frame protects the unit

and enables lifting with a crane.

Features

• Four wheels with brake – the units can be moved with ease and can be stored safely



Technical data

Pressure 500 bar

Water flow 1620 l/h


Voltage 440 V


Benefits






quality of SA 2.5



and lance.

Accessories




Approvals

CE

171


Air Driven HP Cleaners

HPHPC AC AIRIRCCLLEEAAN 25N 25

434 734087

Features

• Supplied ready for use including lubricator, hose,

handle and lance

• Light-weight and easy to set up – can be moved with

ease

• Can be used with hot water, speeding up the

cleaning process

• Simple and robust air motor for easy maintenance

and long operating lifeboosters

Technical data

Pressure 220 bar

Water flow 1140 l/h

Ratio 25:1

Air Consumption 2,3 - 4,5 m3/min

Hose length 10 m

Benefits

• Durable and long lasting

• Can be used in explosive area

Unitor's series of air-driven high-pressure cleaners includes

some of the most advanced air-driven units on the market.

The machines are developed in cooperation with shipping

and offshore customers. They are reliable and can withstand

the rigorous demands of the marine environment.


Supplied with: 10 meter hose, spray handle, single lance

including nozzle, air lubricator and exhaust air muffler.

Accessories



729178 HOSE 15M FOR HPC AIRCLEAN 25 & 32


721945 LANCE 1.5M FOR HPC AIRCLEAN 25 & 32

722223 LANCE 2,5M FOR HPC AIRCLEAN 25 & 32

Approvals

CE, EX GD

172




434 734095

Features


handle and lance

• Light-weight and easy to set up – can be moved with

ease


cleaning process



Technical data

Water pressure (at 8 bar air pressure) 256 bar

Water flow 1440 l/h

Air consumption 3,1 - 7,5 m3/min

Ratio 32:1

Hose length 10 m

Benefits


• Can be used in explosive areas

Unitor's series of air-driven high-pressure cleaners include




the rigorous demands of the marine environment.




Accessories







Approvals

CE, EX GD

173




434 734103

Features


handle and lance

• Light-weight and easy to set up and move


cleaning process



Technical data

Water pressure 384 bar

Air flow 540 m3/h

Water flow 1140 l/h

Air consumption 3,8 - 9 m3/min

Ratio 48:1

Benefits


• Can be used in explosive area

Unitor's series of air-driven high-pressure cleaners includes




the rigorous demands on the marine environment.




Accessories



729186 HOSE 15M FOR HPC AIRCLEAN 48


722231 LANCE 1,5M FOR HPC AIRCLEAN 48


Approvals

CE, EX GD

174


Spares & Accessories for HP Cleaners 300 - 500 bar

PPOOWWEERRSSPPEEEED AD ATTTTAACCHMEHMENTNT, HP, HPCCEE330330

436 721183

SSAANDNDBBLLAASSTTING PING PAACCKK, HP, HPCCEE330 A330 AND 405ND 405

436 721167

175



PPOOWWEERRSSPPEEEED AD ATTTTAACCHMEHMENTNT, HP, HPCCEE552020

436 721209

SSAANDNDBBLLAASSTTING PING PAACCKK, HP, HPCCEE552020

436 721175

176



WWAATTEER FR FILILTTEER INSR INSEERRT ET EXXTTRREEMEME

436 721142

Water filter replacement for models HPCE 330,

405. With micro filter cartridges 50 μ, fabricated

in polypropylene, these reliably protect the high

pressure unit against penetration of polluted

water. Filter should always be used when

operating the machine. Bag contains 10 filters.

EEXXTTRREEME HIGME HIGH PH PRREESSSSUURRE HOE HOSSE - 10 ME - 10 M

436 721365

The extreme hose is suitable for the extreme

high pressure range.

Features

• From + 5° to + 135° / 155 °C intermittently

• Maximum working pressure 500 bar

Technical data

ID in 3/8

ID mm 9,5

OD mm 17,4

Max WP 500 bar

Min BP 1250 bar

Min BR 90 mm


Internal hose: synthetic rubber, extruded whole without

joints, of uniform thickness


External covering: anti-abrasive synthetic rubber, resistant to

oils, fuels and atmospheric conditions

Can be used with HPCE 330, 405 and 520.

Approvals


177



EEXXTTRREEME HIGME HIGH PH PRREESSSSUURRE HOE HOSSE - 25 ME - 25 M

436 721381

The extreme hose is suitable for the extreme

high pressure range. Suitable for working

pressure up to 500 bar.

Features

• From + 5° to + 135° / 155 °C intermittently

• Maximum working pressure 500 bar

Technical data

ID in 3/8

ID mm 9,5

OD mm 17,4

Max WP 500 bar

Min BP 1250 bar

Min BR 90 mm


Internal hose: synthetic rubber, extruded whole without

joints, of uniform thickness


External covering: anti-abrasive synthetic rubber, resistant to

oils, fuels and atmospheric conditions

Can be used with HPCE 330, 405 and 520.

Approvals


178


Spares & Accessories for Air Driven HP Cleaners

SSINGINGLLE LE LAANCNCE HPE HPC AC AIRIRCCLLEEAANN







HIGHIGH PH PRREESSSSUURRE HOE HOSSEE, HP, HPC AC AIRIRCCLLEEAANN







179

MAMARRINE PINE PRROODDUUCCTTSS Stationary High Pressure Systems

Stationary Cold Water Cleaners

DDUUO BO BOOOOSSTTEER 3XR 3X440 V 60 HZ 160 B440 V 60 HZ 160 BAARR

435 597146

Twin pump stationary cold water pressure washers for use by up to two users simultaneously.

Features

• Small and compact – easily to fix to the bulkhead or deck

• Inlet water temp 70 °C – ideal for use with pre-heated water in order to obtain an increased cleaning effect

• 4 ceramic piston pump – long life pumps for intense applications over 8 hours per day

• Lowered pressure output – the pump pressure has been reduced to 160 bar in order to lower the service

requirements and wear and tear

• With the right equipment, one single user can obtain the output of both pumps for heavy flushing and rinsing

applications

Benefits

• 2 pump system (Duo Booster) with electronic control – enables selection of one or two users simultaneously

• Stainless steel design for added hygiene and protection against corrosion

• High level of serviceability

• Built-in water tank – ensures trouble-free water supply

Technical data

Pressure 160 bar

Water flow 1200-2400 l/h


Voltage 440 V


Twin pump stationary cold water unit for medium and heavy

cleaning applications in maritime use.

The Unitor Duo Booster is a 2-pump model for heavy

cleaning applications with 1 or 2 users at same time. The

stainless steel design ensures that hygiene is optimal, with

reduced risk of corrosion. The Unitor Duo Booster can on

special request be equipped with a PCB - extended

electronics allowing the use of factory mounted options such

as remote control, coin boxes, frost protection. The Unitor

Duo Booster can thus be adapted to most customer specific

requirements.

180

Accessories














565960 INLET FILTER F/1-3 PUMPS









565853 LANCE F/VSB 300 03K

618355 SIGN OUTLET POINT




623595 TAKE OFF VALVE


556696 TAKE OFF VALVE B CMPL.. W/INJECTOR






181



DDEELLTTA BA BOOOOSSTTEERR--3 3X3 3X440440/60/60

435 613803

Three pump stationary system allowing up to 3 operators to clean simultaneously. Further pumps may

be added at any time if the cleaning needs increases. Stainless steel frame and robust cabinet ensure

that both pumps and electronics are well protected. Flexible system gives possibility of combining

several Delta Boosters – allowing for multiple simultaneous users on a single line.

Features

• 3 pump system, allowing up to three simultaneous uses

• 4 ceramic piston pumps with 1750 RPM motors – long life pumps for intense applications

• Electronic pump control system – flow control system will detect amount of water required automatically

• Different line pressures available – the Delta Booster is configured standard to 160 bar, but can be supplied with line

pressure down to 80 bar which gives the vessel a tailor made system that suits the needs on board

• Inlet water capacity to 80 ºC – the unit is equipped with a hot and a cold water tank and temp control system. The

double tanks allow storage of both cold and pre-heated water. The control system will maintain the selected

temperature

• Compact design with door opening both left and right – the Delta Booster is easy to transport, install and service

• High level of serviceability – the pumps and motors are quickly and easily removed and the unit will continue to

function even with one or more pumps removed

• Oil changes are easy – reduces the down time of the system

Benefits

• Multiple users - reduces cleaning time

• Flexible system - can be extended

• Ergonomic cleaning - only hose must be connected to outlet

• Low service requirements and low wear and tear

Technical data

Pressure 160 bar

Water flow 1040-3120 l/h

Voltage 440 V



Operating pressure 160 bar. Waterflow 1040 - 3120 l/h. The

unit revolves between different pumps. Flow system starts

up one pump per user; 1 user - pump, 2 users - 2 pumps

and finally 3 pumps for 3 users. If service is required, one

pump can be taken out, leaving 2 pumps operational for

cleaning. Electronic pump control system – control system

will detect the amount of water required by the relevant

number of uses based upon flow and start the correct

number of pumps automatically. As water requirement

drops, pumps will be stopped. Starting of pumps is done by

rotation to avoid excessive wear on any one pump. As water

requirement drops, pumps will be stopped. Starting of

pumps is done by rotation to avoid excessive wear on any

one pump.

182

Accessories























565853 LANCE F/VSB 300 03K













183




435 613804

Delta booster 4 pump high-pressure cleaner

Features

• Stainless steel frame and robust cabinet ensuring that pumps and electronics are well protected

• 2-6 pump system, allowing up to 6 simultaneous uses - piston pump with 1750 RPM motor – long life pump for

intense applications over 8 hours per day

• Electronic pump control system – control system will detect the amount of water required by the relevant number of

uses based upon flow and start the correct number of pumps automatically

• As water requirement drops, pumps will stop. Pumps started on rotation to avoid excessive wear on any one pump

• Different line pressures available - the Delta Booster is configured standard to 120 or 160 bar, but can be supplied

with line pressure down to 80 bar



temperature

• Compact design with door opening both left and right

• High level of serviceability – pumps and motors are quickly and easily removed and the unit will continue to function

even with one or more pumps removed


Benefits

• Efficient operation- reduced time for oil changes


• Ability to combine several delta boosters – allowing for multiple users on single line


• Easy to transport, install and service

Technical data

Pressure 160 bar

Water flow 4160 - 1040 l/h

Voltage 440 V

Electric phase 3


184

Accessories























565853 LANCE F/VSB 300 03K













185




435 613805

A 5 pump stationary system where up to five operators may clean simultaneously. Further pumps may

be added at any time.

Features


• 5 pump system, allowing up to 5 simultaneous uses - piston pump with 1750 RPM motor – long life pump for









temperature





Benefits

• Efficient operation- reduced time for oil changes


• Ability to combine several delta boosters – allowing for multiple users on single line



Technical data

Pressure 160 bar


Voltage 440 V

Electric phase 3


186

Accessories























565853 LANCE F/VSB 300 03K













187




435 613806

A 6 pump stationary system facilitating up to six operators cleaning simultaneously.

Features


• 2-6 pump system, allowing up to 6 simultaneous uses - piston pump with 1750 RPM motor – long life pump for









temperature





Benefits

• Efficient operation: reduced time for oil changes


• Ability to combine several Delta boosters – allowing for multiple users on single line



Technical data

Length 715 mm

Width 790 mm

Height 1800 mm

Weight 450 kg



Electric phase 3

Voltage 440 V



188

Accessories





















565853 LANCE F/VSB 300 03K













621912 HOSE INLET 1"

621904 HOSE, HP OUTLET

711119 HP.OUTLET HOSE FOR STATIONARY 2M

711127 HP.OUTLET HOSE FOR STATIONARY 1M

189



UUNO BNO BOOOOSSTTEER 3XR 3X440 V 60 HZ 160 B440 V 60 HZ 160 BAARR

435 548826

One pump stationary cold water high pressure washers for medium to heavy cleaning.

Features

• Stainless steel frame and robust cabinet – ensure long lifespan

• Inlet water temp 70 °C – ideal for use with pre-heated water in order to obtain an increased cleaning effect

• 4 ceramic piston heavy duty pump for long working life

• Lowered pressure output – pump pressure has been reduced to 160 bar in order to lower the service requirements

and wear and tear

• 1450 RPM motor – slow running motor gived longer working life in high intensity uses

Benefits

• Small and compact – easily fixed to the bulkhead or deck

• Long life pump for intense applications over 8 hours per day

• Built-in water tank – ensures trouble-free water supply

• High level of serviceability

Technical data

Pressure 160 bar

Water flow 1200 l/h


Voltage 440 V


Single pump stationary cold water unit for medium and

heavy cleaning applications in marine use.

The Unitor Uno Booster is a flexible model for heavy cleaning

applications. The stainless steel design ensure that hygiene

is optimal, with reduced risk of corrosion. The product is

thus suited also for galley cleaning on cruise vessels. The

Unitor Uno Booster can on special request be equipped with

a PCB - extended electronics allowing the use of factory

mounted options such as remote control, frost protection.

The Unitor Uno Booster can thus be adapted to most

customer specific requirements.

190


Spares & Accessories Cold Water Stationary Systems

TTAAKKE OE OFFF VF VAALLVVE A FE A FOOR SR SAATTIOIONANARRY AY ACCID PID PRROOOOFF316316

436 623595

Take-off valve A together with the detachable

chemical injector facilitates use of chemicals.

TTAAKKE OE OFFF VF VAALLVVE A FE A FOOR SR STTAATTIOIONANARRY CY CHRHROOMIUMIUMMPPLLAATTEED BD BRRAASSSS

436 623603

Take off valve A for stationary chromium plated

brass. Take-off valve A together with detachable

chemical injector facilitates use of chemicals.

191


Stationary Hot Water Cleaners

SSOOLLAAR BR BOOOOSSTTEER WR WITITH 18 KH 18 KW HEW HEAATTEERR, 3X, 3X440440VV//60 HZ60 HZ

435 665190

Features

• Small and compact – easily fixed to the deck

• Stainless steel frame and robust cabinet – ensures long life span and protects the pump from damage

• Inlet water temp 85 ºC – ideal for use with pre-heated water in order to reduce the power needed to heat the water

to the required temperature

• 4 ceramic piston pump – unit designed using long life pumps for intense applications over 8 hours per day

• Lowered pressure output – units run on 160 bar only, although the pump is capable of delivering 190 bar, in order to

lower the service requirements and wear and tear

• 1400 RPM motor – slow running motor gives longer working life in high intensity uses

• Built-in water tank with heaters – ensures constant and trouble free heating and constant water supply to the pump

• Electric water heating – unit is pollution free and can be set up almost anywhere

• 1x18 kW heating coils in standard model – can be extended up to 54 kW with 3x18 kW if required

Benefits

• Environmentally friendly, pollution-free

• Highly portable unit can be set up almost anywhere

• Long lifespan

Technical data

Length 690 mm

Width 860 mm

Height 950 mm

Weight 175 kg

Power, rated 7.7 + 18 kW


Electric phase 3

Pressure 160 bar

Voltage 440 V

Heating capacity 85 ºC

Water flow 1200 l/h

192

Accessories






















565853 LANCE F/VSB 300 03K













193


Stationary Hot Water Cleaners

SSOOLLAAR BR BOOOOSSTTEER WR WITITH 18 KH 18 KW HEW HEAATTEERR, 3X, 3X400400VV//50 HZ50 HZ

435 665208

Features

• Small and compact – easily fixed to the deck

• Stainless steel frame and robust cabinet – ensures long life span and protects the pump from damage

• Inlet water temp 85 ºC – ideal for use with pre-heated water in order to reduce the power needed to heat the water

to the required temperature

• 4 ceramic piston pump – unit designed using long life pumps for intense applications over 8 hours per day

• Lowered pressure output – units run on 160 bar only, although the pump is capable of delivering 190 bar, in order to

lower the service requirements and wear and tear

• 1400 RPM motor – slow running motor gives longer working life in high intensity uses

• Built-in water tank with heaters – ensures constant and trouble free heating and constant water supply to the pump

• Electric water heating – unit is pollution free and can be set up almost anywhere

• 1x18 kW heating coils in standard model – can be extended up to 54 kW with 3x18 kW if required

Benefits

• Environmentally friendly, pollution-free

• Highly portable unit can be set up almost anywhere

• Long lifespan

Technical data

Length 690 mm

Width 860 mm

Height 950 mm

Weight 175 kg

Power, rated 7.7 + 18 kW


Electric phase 3

Pressure 160 bar

Voltage 380 V

Heating capacity 85 ºC

Water flow 1200 l/h

194

MAMARRINE PINE PRROODDUUCCTTSS Vacuum Cleaning Equipment

Wet & Dry Cleaning Units

VVCCWWDD20 W20 WEET AT AND DND DRRY VY VAACCUUUUM CM CLLEEAANENERR

432 756900

VCWD 20 is a semi-professional compact wet and dry vacuum cleaner ideal for small, simple jobs on

board. Semi-automatic push and clean system allows the user to clean the filter for optimal suction

capacity.

Features

• Small and compact

• Washable PET cartridge filter with up to 99.99% filtration

• Push and clean semi-automatic filter cleaning

• Ideal for fast, simple jobs

• Cable hook

Benefits

• Suction of both wet and dry possible

• Economical reusable filter reduces operating costs

• Improved suction due to semi-automatic filter clean

Technical data

Air flow 3600 l/m

Vacuum 180 mbar

Power rating 1300 mbar

Power supply cycles 50/60 Hz

Power supply phases 1

Power supply voltage 230

Tank volume 20 L


Supplied with:

• Extension tube, plastic

• Filter element, PET

• 4 x filter bags

• 1 x wet filter

• Floor nozzle (300 mm)

• Crevice tool

195




432 721944

The VCWD70 heavy duty vacuum cleaner is the

most advanced unit in the Unitor vacuum range.

The machine is equipped with a stainless steel

container and a built-in pump for easier liquid

removal from small tanks, double bottoms or

engine rooms. With use of accessories it can

also remove liquid from the deck areas.

Features

• Built-in submerged pump can operate without

removing or lifting the container

• Heavy duty stainless steel container makes the unit

capable of removing a wide range of liquids and solid

particles without damaging the container

• Two large wheels at the rear ensure stability during

transport and storage

• Brakes on the front wheels means the unit remains

stable when in use or in storage

• Heavy-duty steel frame protects the unit from

damage during transport and use

• Power supply socket for connection of electric tools;

when the pump is not in use the socket can be used

to power a power tool

• Dirt basket – when vacuuming dirty liquids the

basket makes sure that the particles stay inside the

unit when the liquid is pumped out

Benefits

• Cable and accessories holder ensures safe transport and storage

• Large area liquid removal capabilities – with the correct accessories the unit can be used to remove liquids from large

areas like decks, pool areas & passenger decks

• Soft start – limits the starting power to reduce the initial power surge on the fuses and reduce wear and tear on the

motor

196

Technical data

Power, rated 1500 + 640 W

Flowrate, normal 216000 l/h

Vacuum 230 Mbar

Container capacity 64

Voltage 220 V


VCWD70 wet and dry vacuum cleaner is perfect for users

who need big capacity and features that focus on efficiency.

Our most silent vacuum ever, with superior suction

performance, stainless steel tilt or lift-out container,

automatic filter cleaning, anti-static capability and more.

The 70 litre container found on the wet and dry vacuum

cleaner allows long periods of use without emptying the

container, and Tilt or lift-off container system is convenient

and time-saving.

Operating costs are minimized with the washable PET fleece

filter elements, and the low working noise level allows work

when others are nearby, without disturbing them. Automatic

On/Off models are suitable for use with electric hand tools

as starting or stopping the tool also starts and stops the

vacuum. An accessory airbox is available which performs

the same function when using pneumatic tools.

• XtremeClean fully automatic filter cleaning system (on

many models) takes care of filter cleaning tasks in just

a few seconds

• Washable PET fleece filter for high efficiency and low

maintenance costs

• SilentPower provides high performance that is seen,

but not heard

• 70 litre stainless steel container and a filter bag for the

ultimate in effective filtration and working efficiency

Accessories


681940 LARGE.DECK CLEANING KIT FOR VCWD 70

197




432 681924

Features

• Rubber enclosed power cord which stays flexible even in very low temperatures and is resistant to wear and tear

• Large application area as the unit is resistant to most chemicals and oils and can be used for a variety of cleaning

tasks including removal of liquids and solids in the workshop, engine room, deck areas and accommodation areas

• Large on/off switch can be started or stopped without removing gloves

• Large wheels provide stability even on rough surfaces

• Power cord hook ensures the cord stays secured to the unit while in transit or in storage

Benefits

• Low noise level means the unit can be used for longer periods and in environments where noise must be held at a

minimum

• Ergonomic design means the unit can be used for longer periods of time due to lower user fatigue

Technical data

Flowrate l/min 3700

Vacuum 230 mbar

Power, rated 1500 kW

Voltage 220 V

Container capacity 27 L

198



VVCCAADD200 W200 WEET AT AND DND DRRY VY VAACCUUUUM CM CLLEEAANENERR

432 682054

VCAD200 air driven vacuum cleaner. Handles

particles and liquids that would damage a

normal electric vacuum cleaner.

Features

• Attaches on top of any 200 litre drum – no need to

store a big container when not in use

• Air driven

• No moving parts

• Oil resistant – the unit can be used for small oil spills

on board, as an oil transfer pump or to remove

wastewater from tanks or double bottoms

Benefits

• Universal - the unit will use any obsolete drum

• No danger of sparks

• Virtually maintenance-free

• Versatile – unit can be used as a transfer pump if needed

Technical data

Air consumption 3600 l/min

Vacuum 390 MBAR


The unit has no moving parts and is designed to be fitted on

a standard 200 litre drum. The unit can be used for a variety

of tasks including removing water and oil spillage, emptying

drums or moving chemicals. Able to handle particles and

liquids that many electric vacuums would not be able to

handle.


Supplied with:

• Suction hose

• Crevice nozzle

• Coarse dirt deck nozzle

• Tubes

Accessories




191841 40 UPH PLUG 1/2'' HOSE


199


Accessories & Spares Vacuum Cleaners

SSUUCCTTIOION HON HOSSE 1.E 1.8 M F8 M FOOR VR VCCWWDD1818

431 665448

SSTTRRAAIGIGHT THT TUUBBE VE VCCDD15 & 215 & 277

431 665232

Extension tube

WWAATTEER HOR HOSSE & SE & SUUCCTTIOION HON HOSSE FE FRRO VO VCCCCWW2244

431 682013

CCAARRPPEET NOT NOZZZZLLE FE FOOR VR VCCCCWW2244

431 682021

DDEECCK SK SCCRRUUBBBBING AING ADDAAPPTTEER FR FOOR VR VCCCCWW2244

431 682039

200


Accessories & Spares Vacuum Cleaners

SSUUCCTTIOION HON HOSSE 4M FE 4M FOOR VR VCCWWD 7D 700

431 681965

LLAARRGGE DE DEECCK CK CLLEEAANING KNING KIT FIT FOOR VR VCCWWD 7D 700

431 681940

LLIQIQUUID RID REEMOMOVVAAL KL KIT FIT FOOR VR VCCWWD 7D 700

431 681957

CCUURRVVEED TD TUUBBE 100 CE 100 CM FM FOOR VR VCCWWD 7D 700

431 681973

201

MAMARRINE PINE PRROODDUUCCTTSS Cargo Hold Cleaning

Mucking Pumps

MUMUCCKKING PING PUUMP - MAMP - MARRINE GINE GM2M2

482 593996

The Unitor Mucking pump is designed to

undertake heavy duty liquid and semi-liquid

removal from tanks, cargo holds, double

bottoms and ballast tanks. Submursed pump

capacity in excess of 40 tons per hour or 4-6

tons per hour when materials are shovelled

directly into the pump.

Features

• Supply liquid can include most pressurised fluids (water, crude/refined oil, and chemicals

• Operates on normal pressure of a vessel's fire, tank cleaning or cargo lines, does not require additional equipment

• Passes through a standard butterworth opening enabling access to all parts of the vessel

• Built in pressure gauge enables easy ability control and monitor flow

Benefits

• Versatile pump with unlimited applications

• Handles solids up to 1” in diameter – great for removing scale and rust from cargo holds

• Corrosion resistant stainless steel parts are virtually maintenance free

• Simple to operate with no moving parts and is lightweight

• Fastest way of removing liquids

Weight 30 kg

Capacity submerged 40 tons/hour

Capacity manual load 6 tons/hour

The solution is based on the Venturi principle, the

pressurized supply fluid is converted by the nozzle into

velocity energy. The material can be shovel fed into the unit if

it is solidified. The emerging supply fluid is collected in the

mixing chamber, mixed with the surrounding liquid or

particles and than ejected as a fully mixed solution through

the diffuser.

Accessories


708156 BUTTERWORTH CONNECTORS

708123 CAMLOC CONNECTOR 102MM TABLE D FLEN

708131 2 PCS TPI CONNECTOR

708099 VACUUM KIT

661702 MUD & SILT REMOVER 210 LTR


757777 HANDYMAX CARGO HOLD CLEANING KIT

749770 PANAMAX CARGO HOLD CLEANING KIT

749746 PANAMAX LIGHT HOLD CLEANING KIT

202


Mucking Pump - Accessories, consumables & spares

VVAACCUUUUM KM KIT FIT FOOR MUR MUCCKKING PING PUUMPMP

482 708099

Vacuum kit for mucking pump

CCAAMLMLOOC CC COONNENNECCTTOOR 10R 102 MM T2 MM TAABBLLE D FE D FLLEENGNGFFOOR MUR MUCCKKING PING PUUMPMP

482 708123

Camloc connector for mucking pump

TTPPI CI COONNENNECCTTOORRS FS FOOR MUR MUCCKKING PING PUUMPMP

482 708131

TPI connectors for mucking pump

BBUUTTTTEERRWWOORRTTH CH COONNENNECCTTOORRS FS FOOR MUR MUCCKKINGINGPPUUMPMP

482 708156

Butterworth connector between pump and supply hose.

203


Cargo Hold Cleaning Kit

CCAARRGGO HOO HOLLD CD CLLEEAANING KNING KIT - HAIT - HANDNDYYMAMAXX

482 757777

The Unitor Handymax kit has been developed in

order to facilitate cargo changeover on board

small to medium bulk carriers.

Features

• Simple to use - the 2.4 m lance applies foaming

chemicals from the tank top

• Supplied with 1.5" double diaphragm pump

• Ready for use - all hoses and equipment are fitted

with quick connectors and couplings

• Designed for Panamax sized vessels

Benefits

• Fast and efficient cleaning solution reduces turnaround time in port

• Simplicity through simple to assembly and clear instructions

• Safe in use and no need for cranes

The kit consists of all necessary equipment needed for a

complete cleaning operation. The kit is supplied ready to use

in a shock proof plastic container which can be easily

transported between vessels. The equipment has been

designed for application of both cleaning chemicals and

temporary coatings as well as rinsing and wash down.


Supplied with:

• Double diaphragm pump 1050

• Long reach lance 2.4 m with 3 nozzles

• Medusa air distributor

• 5 m, 1" suction hose

• 40 m, 3/8” air hose with quick connectors

• 10 m, 3/8” air hose with quick connectors

• 50 m, 3/4” chemical hose with quick connectors

• 550 L plastic container

Accessories


575605 AQUABREAK PX 210 LTR

737007 AQUATUFF HIGH FOAM 210 LTR

571653 DESCALING LIQUID 25 LTR

655506 METAL BRITE HD 210 LTR

737023 SLIP-COAT 210 LTR

757396 SLIP-COAT WR (210 LTR)

Related products:

593996 MUCKING PUMP - MARINE GM2

682054 VCAD200 WET AND DRY VACUUM CLEANER

658229 TORNADO 3 CARGO HOLD CLEANING JET

740761 EXTENSION.FOR CHEM APPLICATOR LANCE

204

CCAARRGGO HOO HOLLD CD CLLEEAANING KNING KIT - PIT - PAANANAMAMAX LX LIGIGHTHT

482 749746

The Panamax kit can be used on board all bulk

carriers equipped with a working air compressor

able to deliver minimum 2 m3/min.

Features

• Simple to use

• Fast - covers up to 150 m2/min of bulkheads with

foaming chemicals


Benefits

• Fast and efficient cleaning solution reduces

turnaround time in port

• Simplicity through simple to assembly and clear instructions


The equipment has a reach of 25 m using the foam nozzle

which enables the crew to work from the tank top without

the use of cranes or scaffolding even on a Panamax size

vessel. By using the guide wire kit (included) the reach can

be extended to even greater heights.

The Panamax light kit is equivalent to the Panamax kit

excluding the Tornado 3 cleaning jet and water supply hose.

This light version is for vessels that have a water jet solution.

The Panamax light is supplied in a single plastic container,

reducing the storing space.


• Chemical applicator 150

• Long reach lance - 4.8 m with 3 seperate nozzles

• 1/2" air supply hose - 50 m with Unitor quick

couplings

• 3/4" Air supply hose - 50 m with Unitor quick

couplings

• 3/4" Chemical hose - 50 m with Unitor quick

couplings

• Guide wire kit

• 550 L plastic container

Accessories








Related products:





205

CCAARRGGO HOO HOLLD CD CLLEEAANING KNING KIT - PIT - PAANANAMAMAXX

482 749770

The Panamax kit can be used on board all bulk

carriers equipped with a working air compressor

that delivers minimum 2 m3/min.

Features

• Simple to use

• Fast - covers up to 150 m2/min of bulkheads with

foaming chemicals


Benefits

• Fast and efficient cleaning solution reduces

turnaround time in port

• Simplicity through simple assembly and clear

instructions


The equipment has a reach of 25 m using the foam nozzle

which enables the crew to work from the tank top without

the use of cranes or scaffolding even on a Panamax size

vessel. By using the guide wire kit (included) this reach may

be further extended for use on board cape size vessels.


Supplied with:

• Chemical applicator 150

• Long reach lance - 4,8 m with 3 nozzles

• Tornado 3 Cleaning Jet

• 2" Water supply hose - 45 m with Storz C couplings


couplings


couplings

• 3/4" Chemical hose - 50 m with Unitor quick

couplings

• Guide wire kit

• 550 L plastic storage container (2 pieces)

Accessories








Related products:





206


Cargo Hold Cleaning Kit - Accessories, consumables & spares

EEXXTTEENSNSIOION FN FOOR CR CHEHEMICMICAAL AL APPPPLLICICAATTOOR LR LAANCNCEE

482 740761

207


Cleaning Jets

TTOORRNANADDO 2 CO 2 CAARRGGO HOO HOLLD CD CLLEEAANING JNING JEETT

482 740779

The Tornado 2 is the smallest cleaning jet,

designed as a small and handy unit for use

onboard small bulk carriers or in confined

spaces on bigger vessels.

Features

• Easy to set up and use

• High quality non-corrosive materials ensure long

operating life with minimum maintenance

• High pressure and high water volume provide

efficient and quick cleaning

• Long reach capability is optimal solution for

encrusted dirt and scale on the bulkheads

Benefits

• No specialist operator training required

• Efficient and fast

The Tornado 2 can be connected to either the fresh water

line or to the suppression pump. The Jet features a

replaceable nozzle system that enables the operator to use

the jet as a foam applicator or a temporary coating

applicator as well as its main function of rinsing or washing

down.

208


Cleaning Jets


482 658229

The Tornado 3 has been designed for use on

board medium to large bulk carriers. Shut off

ball valve for both air and water supply is

mounted on the Tornado for increased safety

and simpler operations.

Features

• Stainless steel design

• Swivel connection between gun and tripod

• Works on normal fire line and working air line on

board

• High water volume

Benefits

• Long operating life with minimum maintenance

• Easy to set-up and connect without any additional equipment

• Enables crew to clean cargo holds quickly

• Easy to use, aim and transport and does not require any special training

Technical data

Recommended water pressure 6 bar

Recommended air pressure 7 bar

Air consumption 2 m3/min

The intended use is cleaning and descaling of cargo holds. It

uses the suppression pump as a water source. This enables

the jet to reach the top of the hold and at the same time

giving the capacity needed to remove even the most

stubborn dirt or scale.

Accessories


574947 GUARDMAN FIREHOSE 2" PER MTR


191866 600 UPH PLUG 3/4'' HOSE



671776 AIR HOSE 3/4", RUBBER LTH=50MTR

233833 NOR-1 CPL W/2'' HOSE SOCKET

523431 STORZ 65 CPL W/2'' HOSE SOCKET

209


Cleaning Jets


482 740712

The Tornado 4 is the largest jet in the range.

This jet have been designed for the most

difficult cleaning challenges

Features

• Easy to set up and use with no specialist operator

skill or training required

• High quality non-corrosive material ensures long

operating life with minimum maintenance

• High pressure and high water volume provides

efficient and quick cleaning

Benefits

• Long reach - optimal solution for encrusted dirt and scale on the bulkheads

• Can be used onboard ChinaMax vessels

Technical data

Water Flow 80 - 120 m3/h

Range 40 - 70 m

Recommended water pressure 7 - 10 bar

Water Connection 2 1/2" (Stoz C)

Required air flow 5 m3/min

Recommended air pressure 7 - 10 bar

Air Connection 1" (claw coupling)

The Tornado 4, like the Tornado 3, uses the power

suppression pump to power it. While the Tornado 3 is

capable of delivering up to 22m3/h, the Tornado 4 can

handle up to 120m3/h. This huge amount of water is

capable of removing any cargo residue or scale at large

distances. Increasingly large vessels, including ChinaMax

vessels, require powerful equipment to enable fast and

efficient cleaning, reducing turnaround time in port.

210

MAMARRINE PINE PRROODDUUCCTTSS Ultrasonic - Part and Filter cleaners

Ultrasonic

UUNITNITOOR UR ULLTTRRAASSOONIC CNIC CLLEEAANENER SR S--770000/HM, 110 V/HM, 110 V

664 766899

Unitor Ultrasonic cleaning machines are

specially designed for use in the engine room on

board to remove even the most stubborn dirt,

cleaning inside areas that are out of reach for

conventional cleaning methods.

Features

• Sweep function

• New units have a front mounted panel for electronics, enabling efficient servicing

• Efficient and fast heating

Technical data

Tank working volume 55 L

Average overall power 2750 W

Ultrasonic peak perf. max 1000 W

Heating 2200 W

Benefits

• Reduced chemical consumption

• Cleans inside filters and fuel nozzles

• Logical operation panel

• Pulse function for increased cleaning power

Compared with traditional cleaning methods, use of

ultrasonic cleaning units results in reduced manual work,

reduced consumption of hazardous chemicals and improved

cleaning performance without damaging the items to be

cleaned.

Use of an Ultrasonic machine combined with suitable

detergent makes it particularly effective for cleaning complex

machine parts like injection nozzles, fuel and pump parts,

inlet and exhaust valves, etc. The unit is well suited for

cleaning of fine mesh fuel and lube oil filters which can be

cleaned without damaging the fine filter elements.

Ultrasonic cleans all surfaces which are covered with water.

As a consequence it cleans in areas where no other cleaning

technology can reach.


Supplied with: Drain, lid, basket and stainless steel frame

for secure fastening to the floor.

Accessories


607819 UNITOR USC 12 X 1 LTR


575696 CARBONCLEAN LT 25 LTR

571430 COLDWASH HD 25 LTR

571380 ENVIROCLEAN 25 LTR

571661 METAL BRITE 25 LTR

211


664 766881






Features

• Sweep function

• New units have a front mounted panel for

electronics, enabling efficient servicing of electronics

in the machine


Technical data



Ultrasonic peak perf Max 2000 W

Heating 2200 W, temperature adjustable 30-80º C

Benefits




• Pulse function for increased cleaning power during

operation


Ultrasonic cleaning units results in reduced manual work,



cleaned.











Supplied with:

• Bottom drain

• Lid

• Basket

• Stainless steel frame for secure fastening to the floor

Accessories



212







213


664 766907






Features

• Sweep function



in the machine


Technical data




Heating 2200 W, temperature adjustable 30-80 ºC

Benefits





operation





cleaned.









technology can reach


Supplied with:

• Bottom drain

• Lid

• Basket


Accessories








214


664 766923






Features

• Sweep function



in the machine


Technical data



Ultrasonic peak perf max 2000 W


Benefits





operation





cleaned.











Supplied with:

• Bottom drain

• Lid

• Basket


Accessories








215


664 766956

Unitor Ultrasonic cleaning machines are specially designed for use in the engine room on board to

remove even the most stubborn dirt, cleaning inside areas that are out of reach for conventional

cleaning methods. The S-3300/HM offers cleaning capacity with a length of up to 107 cm.

Features

• Sweep function

• New units have a front mounted panel for electronics, enabling efficient servicing of electronics in the machine


Benefits




• Pulse function for increased cleaning power during operation

Technical data






Ultrasonic cleaning units is resulting in reduced manual

work, reduced consumption of hazardous chemicals and

improved cleaning performance without damaging the items

to be cleaned.










This machine is only available on request. Expect

longer lead times for delivery.


Supplied with:

• Bottom drain

• Lid

• Basket


Accessories








216


Ultrasonic

MUMULLTTI-FI-FRREEQQUUEENCNCY GY GEENENERRAATTOORR, MF 2000, MF 2000

664 659748

Ultrasonic generators with multiple frequency

technology are specially designed units that

convert electrical energy into ultrasonic signals.

Connected with immersible transducers,

ultrasonic signals from the generator will be

converted into corresponding mechanical

vibrations able to "scrub off" surfaces immersed

in liquid.

Features

• Robust unit - material in contact with cleaning

solution is made of stainless steel

• Thermostatic adjustable heating and timer function

• Designed for use with water-based as well as

solvent-based cleaning chemicals

• Convenient drainage option

• Mounted on stainless steel frame for secure fastening to the deck

• Ideal partner for cleaning fuel and lube oil filters

Benefits

• Allows useage of chemicals with less environmental exposure

• Flexible solution that can be tailor made

• Low audible noise

Technical data

External measurement: 530 mm(L), 620 mm(W), 230 mm(H)

Ultrasonic power: 2000 W

Main voltage: 1x230 V/50 or 60 Hz

Frequency switching: 25/45 kHz

Power consumption: 8.8 A

Output power regulation: 10-100%

Degassing function: Yes

Max. cleaning volume: 200 L

Two selectable ultrasonic frequencies enables adjustable

energy to be transferred into the cleaning solution depending

on the deposits and items to be cleaned.

217


Ultrasonic


664 659755








in liquid.

Features









Benefits




Technical data












218


Ultrasonic


664 659763








in liquid.

Features









Benefits




Technical data












219


Ultrasonic

IMMEIMMERRSSIBIBLLE UE ULLTTRRAASSOONIC TNIC TRRAANSNSDDUUCCEERR, MF, MF-T-TSS600600

664 659798

Immersible transducers convert an electrical

ultrasonic signal from the generator into

corresponding mechanical vibrations. When

transducers vibrate, pressure waves are sent

into the cleaning tank to "scrub off" surfaces

immersed in liquid.

Features

• Robust unit made of stainless steel

• For installation in new or existing tanks

• Compatible with water-based and solvent-based

cleaning chemicals

• Removes deposits, soil and fouling completely without additional manual work

• Ideal partner for cleaning fuel oil filters, air cooler, and heat exchanger

Benefits

• Environmentally friendly (promotes use of safe chemicals, lower concentration)

• Can be used as single or multiple installation

Technical data






The range of immersible ultrasonic transducers are designed

for installation in new or existing cleaning tanks. Depending

on size of the tank and the ultrasonic energy level needed,

single or multiple units can be used. Use of immersible

transducers offers the ability to upgrade or custom fit any

tank to improve the speed and effectiveness of the washing

process.

220


Ultrasonic


664 659797






immersed in liquid.

Features




cleaning chemicals



Benefits



Technical data








on the size of the tank and the ultrasonic energy level

needed, single or multiple units can be used. Use of

immersible transducers offers the ability to upgrade or

custom fit any tank to improve the speed and effectiveness

of the washing process.

221


Ultrasonic


664 659805






immersed in liquid.

Features




cleaning chemicals



Benefits



Technical data












process.

222


Ultrasonic


664 659821






immersed in liquid.

Features




cleaning chemicals



Benefits



Technical data












process.

223

MARINE PRODUCTS

PUMPSPAINT SPRAYING




GASES, REFRIGERANTS AND CYLINDERSWith regulation changing constantly, shipowners are faced with an onerous task as they work to ensure that potentially dangerous substances are used, stored and disposed of safely and in an environmentally sound manner. WSS has the world’s largest dedicated network of marine refrigerant, gases and cylinder technicians, all of whom understand regulation and work in partnership with you to recommend the most suitable course of action.

Our product range includes gases, spangases, refrigerants, regulators and gas distribution systems. All products are supported by WSS’s unrivalled global network, specially trained technicians and 24/7 service support.

All cylinders are BAR-coded, tracked, traced and secured through the WSS UniTrak system. This ensures compliance with the International Code for the Security of Ships and of Port Facilities (ISPS Code). Every WSS cylinder can be identified by its own unique barcode number. Without this identification the cylinder and its contents must be considered suspect.

MAMARRINE PINE PRROODDUUCCTTSS Gases

Acetylene

AACCEETTYYLLEENE ANE A--40 F40 FILILLLINGING

710 905026

In combination with oxygen, Acetylene A-40

filling is used for gas cutting and welding.

Features

• Colourless and slightly lighter than air

• It is non-toxic, but has an anesthetic effect if inhaled

• Acetylene is highly flammable

• When mixed with oxygen for welding, the flame

temperature will reach 3100º C

Benefits

• For your safety, the product is delivered in a Unitor

cylinder complete with barcode and unique cylinder

serial number.

• We trace and track all cylinders using the UniTrak

system to give you peace of mind

Technical data

Height 1360 mm

Weight 128 kg

Colour MAROON RED kg

Diameter 230 mm

Connection size/type G 3/4" R.H. INTERNAL bar

Tare weight 67 kg

Gross weight 73 kg

Gas capacity (nm3) 5.6 m3

Gas capacity (kg) 6.2 kg

Acetone contents 12.4 kg

Volume 40 l

Purity 5.0

Saturation gas 0.8 kg

Cylinder type A-40 mm

Acetylene C2H2

Acetylene mixed with air is explosive within 2.2% to 85% by

volume. Avoid releasing acetylene into the air and ensure

good ventilation where acetylene cylinders are stored or

used.

Tare "A" weight of acetylene cylinders includes cylinder shell,

neckring, valve, porous mass and acetone. For acetylene

the following is valid:

• 1 nm3 = 1.095 kg

• 1 kg = 0.91 nm3

• 1 bar = 14.5 psi

• 1 nm3 = 35.3 ft3

• 1 kg = 2.2 lbs

226


Acetylene

AACCEETTYYLLEENE ANE A--5 F5 FILILLLINGING

712 905067

In combination with oxygen, Acetylene A-5 filling

is used for gas cutting and welding. Small

cylinder allows to access difficult accessible

spaces. Backpack available.

Features

• Colourless and slightly lighter than air

• It is non-toxic, but has an anesthetic effect if inhaled

• Acetylene is highly flammable

• When mixed with oxygen for welding, the flame

temperature will reach 3100º C

Benefits



serial number



Technical data

Height 620 mm

Weight 15 kg

Colour MAROON RED

Diameter 140 mm

Connection size/type G 3/4" R.H. INTERNAL

Tare weight 14 kg

Gross weight 15 kg



Acetone contents 1.6 kg

Volume 5 l

Saturation gas 0.1 kg

Cylinder type A-5

Function GAS WELDING

Acetylene C2H2

Acetylene mixed with air is explosive within 2.2% to 85% by

volume. Avoid releasing acetylene into the air and ensure

good ventilation where acetylene cylinders are stored or

used.

Tare "A" weight of acetylene cylinders includes cylinder shell,

neckring, valve, porous mass and acetone. For acetylene

the following is valid:

• 1 nm3 = 1.095 kg

• 1 kg = 0.91 nm3

• 1 bar = 14.5 psi

• 1 nm3 = 35.3 ft3

• 1 kg = 2.2 lbs

227


Oxygen

OOXXYYGGEEN ON O--40 F40 FILILLLINGING

711 905034

In combination with Acetylene, Oxygen O-40

filling is used for gas cutting and welding.

Features

• Colourless, odourless and tasteless

• It is approximately 1.1 times heavier than air

• Oxygen itself is non-flammable, but it supports

combustion

• It can cause fire or explosion in combustible

materials

Benefits



serial number



Technical data

Height 1360 mm

Weight 60 kg

Design Pressure 150 bar

Colour BLUE

Pressure 150 bar

Hydrostatic Test Pressure 225 bar

Diameter 230 mm

Tare weight 52 kg

Gross weight 60 kg



Volume 40 l

Purity 99,5%

Cylinder type O-40

228


Oxygen

OOXXYYGGEEN ON O--5 F5 FILILLLINGING

713 905075

In combination with Acetylene, Oxygen O-5

filling is used for gas cutting and welding. Small

cylinder allows to access difficult accessible

spaces. Backpack available.

Features

• Colourless, odourless and tasteless

• It is approximately 1.1 times heavier than air

• Oxygen itself is non-flammable, but it supports

combustion

• It can cause fire or explosion in combustible

materials

Benefits



serial number



Technical data

Height 620 mm

Weight 12 kg

Colour BLUE

Pressure 200 bar

Diameter 140 mm

Connection size/type W 21.8 MM X 1/14"

Gross weight 13 kg

Gas capacity (nm3) 1 m3


Volume 5 l

Cylinder type O-5

229


Nitrogen

NITNITRROOGGEEN N-N N-5050 F5050 FILILLLINGING

717 905601

Nitrogen 5.0 grade is predominantly used for

blanketing purposes.

Features

• Nitrogen is a colourless, odourless and tasteless

• Non-combustible and non-toxic

• Slightly lighter than air and it's an inert gas

• The composition is: Nitrogen 5.0: >99.999%

• Nitrogen is well suited for purging or flushing cargo

tanks and pipelines of residual gases and vapours

prior to loading cargo

• It is also used as a 'blanket' on top of several types

of cargoes to prevent reactions with oxygen from

atmospheric air

Benefits



serial number



Technical data

Length 1690 mm

Colour GREEN/ORANGE

Pressure 200 bar

Diameter 230 mm

Connection size/type W24.32 MM X 1/14"

Tare weight 81 kg

Gross weight 92 kg



Volume 50 l

Purity 99.999%

Cylinder type N-5050

Function INERTING

230


Nitrogen


714 905208


purging.

Features

• Nitrogen is a colourless, odourless and tasteless



• Nitrogen is well suited for purging or flushing cargo

tanks and pipelines of residual gases and vapours

prior to loading cargo



atmospheric air

Benefits



serial number



Technical data

Length 1690 mm

Colour GREEN

Pressure 200 bar

Diameter 230 mm


Tare weight 81 kg

Gross weight 92 kg



Volume 50 l

Purity 99.9%


Function INERTING

231


Nitrogen


717 905602


calibration purposes.

Features

• Nitrogen is colourless, odourless and tasteless



• The composition is: Nitrogen 5.0: >99.999%

Benefits



serial number



Technical data

Length 1000 mm

Colour GREEN/ORANGE

Pressure 200 bar

Diameter 140 mm


Tare weight 18 kg

Gross weight 20 kg



Volume 10 l

Purity 99.999%


Function ANALYSIS

232


Nitrogen


714 905232


purging.

Features

• Nitrogen is colourless, odourless and tasteless



• It's well suited for purging or flushing cargo tanks

and pipelines of residual gases and vapours prior to

loading cargo



atmospheric air

Benefits



serial number



Technical data

Length 1000 mm

Colour GREEN

Pressure 200 bar

Diameter 140 mm


Tare weight 18 kg

Gross weight 20 kg



Volume 10 l

Purity 99.9%


Function INERTING

233


Cruise gas

PPRROOPPAANE PNE P--5 F5 FILILLLINGING

719 905615

Propane is used on cruise ships as fuel for

barbecues.

Features

• Propane is a colourless gas found in natural gas and

petroleum

• Highly flammable

• Propane cylinders are fitted with American valves;

adaptors are available- Adaptor with product no.

625483 enables filling or use when the European

W21.8 LH is needed

Benefits



serial number



Technical data

Length 330 mm

Colour OFF WHITE

Diameter 203 mm

Connection size/type CGA 510

Tare weight 4.5 kg

Gross weight 7 kg


Volume 6 l

Cylinder type P-5

Function FUEL GAS

234


Cruise gas

HEHELLIUIUM H-M H-40 F40 FILILLLINGING

719 905618

Helium is mainly used as a balloon-inflating gas.

Also used for blow out preventors in the

offshore market.

Features

• Colourless, odorless inert gaseous element occurring

in natural gas

• Helium is used as a component of artificial

atmospheres including lifting gas for balloons

• A special balloon fill regulator (Product no. 698

624434) is available

• One cylinder Helium H-40 is filled to 200 bar resulting

in 7.5 m3 of gas

• One cylinder Helium H-40 fills on average 375

balloons

Benefits



serial number.

• We trace and track all cylinders using the UniTrak system to give you peace of mind.

Technical data

Length 1350 mm

Colour ORANGE BROWN

Pressure 200 bar

Diameter 230 mm

Connection size/type W24.32 mm X 1/14"

Tare weight 55 kg

Gross weight 57 kg



Volume 40 l

Cylinder type H-40

Function LEISURE GAS

235


Cruise gas

CCAARRBBOON DN DIOIOXXIDIDE FE FILILLLINGING

Carbon dioxide is used to carbonate beverages

as well as in potable water plants to control

accidity (pH). When welding (MAG) low carbon

steel CO2 is used as shielding gas.

Features

• Colourless, odorless and an incombustible gas

• CO2 cylinders are fitted with handwheel operated

valves and an American type side connection

• A regulator for this type of cylinder is available under

product no. 698 510004

Benefits



serial number





905619 CARBON DIOXIDE C-9 FILLING

905695 CARBON DIOXIDE C-27 FILLING

236


Cruise gas

NITNITRROOGGEEN FN FOOOOD GD GRRAADDE N-E N-10F10FG FG FILILLLINGING

719 905679

Nitrogen food grade is mainly used for specific

beer types in combination with CO2.

Features

• For draught beers which need nitrogen (N2) in

combination with carbon dioxide (CO2)

• Results in a more smooth taste and a finer dispersed

head on top of the beverage

• Food grade nitrogen has a purity of 99.995% (4.5

purity)

• Food grade nitrogen conforms to E961 (food

additive) or similar standard (BS4105)

• Regulator 510 Nitrogen is used for N-10FG cylinder,

available under product number 510002

Benefits



serial number



Technical data

Length 1000 mm

Colour GREEN/BLACK

Pressure 200 bar

Diameter 140 mm


Tare weight 18 kg

Gross weight 20 kg



Volume 10 l

Purity 99.995%

Cylinder type N-10FG

Function BEVERAGES

237


Breathing oxygen

BBRREEAATTHING OHING OXXYYGGEEN MON MOXX--2 F2 FILILLLINGING

719 905638

Breathing oxygen is used for medical

emergency situations where a person requires

assistance with breathing. Typically used in

portable equipment.

Features

• Breathing Oxygen cylinders are fitted with Yoke-type/

PISS valves, which are familiar to the majority of

users

• The filling pressure is lower than the normal 200 bar

in some locations due to local rules and regulations

that limit filling pressure

Benefits



serial number



Technical data

Length 415 mm

Colour GREEN/WHITE

Pressure 200 bar

Diameter 102 mm

Connection size/type CGA870 / PISS ISO407

Tare weight 2.9 kg

Gross weight 3.4 kg



Volume 2 l

Cylinder type MOX-2

Function MEDICAL

238


Breathing oxygen


719 905616



assistance with breathing

Features



users




Benefits



serial number



Technical data

Length 690 mm

Colour GREEN/WHITE

Pressure 200 bar

Diameter 106 mm


Tare weight 6.6 kg

Gross weight 7.9 kg



Volume 5 l

Cylinder type MOX-5

Function MEDICAL

239


Breathing oxygen


719 905617



assistance with breathing.

Features



users




• MOX-40 filled cylinder is also used for ships

transporting dangerous goods according to the

IMDG which are required to have this type of oxygen

onboard for emergencies

Benefits



serial number

• We trace and track all cylinders using the UniTrak system to give you peace of mind

Technical data

Length 1210 mm

Colour GREEN/WHITE

Pressure 200 bar

Diameter 229 mm


Tare weight 55 kg

Gross weight 66 kg



Volume 40 l

Cylinder type MOX-40

Function MEDICAL

240


Argon

AARRGGOON EN E--50 F50 FILILLLINGING

715 905174

Argon is used as shielding/backing gas for

electrical welding.

Features

• Argon is a colourless and odourless gas

• Argon is slightly heavier than air and is an inert gas

• It's non-toxic and non-combustible

• It's used as a shielding gas for welding, primarily to

protect the molten pool against contaminants in the

atmosphere

Benefits



serial number



Technical data

Height 1690 mm

Colour GREY

Pressure 200 bar

Diameter 230 mm


Tare weight 81 kg

Gross weight 99 kg


Gas capacity (kg) 18 kg

Volume 50 l

Cylinder type E-50

Function WELDING

241


Argon

AARRGGOON EN E--10 F10 FILILLLINGING

715 905565

Argon is used as shielding/backing gas for

electrical welding.

Features

• Argon is a colourless and odourless gas

• Argon is slightly heavier than air and is an inert gas

• It's non-toxic and non-combustible



atmosphere

Benefits



serial number



Technical data

Height 1000 mm

Colour GREY

Pressure 200 bar

Diameter 140 mm


Tare weight 18 kg

Gross weight 22 kg


Purity 5.0

Cylinder type E-10

Function WELDING

242


Argon

UUNIMIX 20 M-NIMIX 20 M-10 F10 FILILLLINGING

715 905573

Argon-CO2 mixes are used as shielding gas in

MIG / MAG welding processes

Features

• Argon-CO2 mix is a colourless and odourless gas

• Argon-CO2 mix is slightly heavier than air and is an

inert gas

• Argon-CO2 mix is non-combustible



atmosphere

• 80% Argon/20% CO2 mix is suitable for welding all

un/low alloyed carbon steels

• Unimix gives a very stable molten pool together with

optimum energy-transmission

Benefits



serial number


Technical data

Height 1000 mm

Colour GREY/YELLOW

Pressure 200 bar

Diameter 140 mm


Tare weight 18 kg

Gross weight 21 kg



Volume 10 l

Cylinder type M-10

Function WELDING

243


Argon

UUNIMIX 20 M-NIMIX 20 M-50 F50 FILILLLINGING

715 905581

Argon-CO2 mixes are used as shielding gas in

MIG / MAG welding processes.

Features

• Argon-CO2 mix is a colourless and odourless gas

• Argon-CO2 mix is slightly heavier than air and is an

inert gas

• Argon-CO2 mix is non-combustible



atmosphere

• 80% Argon/20% CO2 mix is suitable for welding all

un/low alloyed carbon steels

• Unimix gives a very stable molten pool together with

optimum energy-transmission

Benefits



serial number


Technical data

Height 1690 mm

Colour GREY/YELLOW

Pressure 200 bar

Diameter 230 mm


Tare weight 81 kg

Gross weight 98 kg



Volume 50 l

Cylinder type M-50

Function WELDING

244

MAMARRINE PINE PRROODDUUCCTTSS Spangases

Nitrogen mixtures

AAMMOMMONIANIA

Span gases are used for calibration and bump

testing of gas detection equipment.

Features

• Refillable SG10 cylinder

Benefits



serial number





588954 AMMONIA IN N2 35% LEL

588947 AMMONIA IN AIR 35% LEL

245


Nitrogen mixtures

OO2 IN NIT2 IN NITRROOGGEEN IN SN IN SGG10 C10 CYYLLINDINDEERR



Features


Benefits



serial number




Product Number Product name

620179 O2 0.5% IN NITROGEN

589051 O2 1% IN N2 99%

589044 O2 2% IN N2 98%

620146 5 % OXYGEN IN NITROGEN

589135 O2 8% IN N2 92%

246


Nitrogen mixtures

CCOO2 IN NIT2 IN NITRROOGGEEN/AN/AIR IN SIR IN SGG10 C10 CYYLLINDINDEERR



Features

• Refillable SG10 and SG50 cylinder

Benefits



serial number





657973 CO2 0.3% IN 99.7% NITROGEN

905661 CO2 1% IN N2 99%

620104 CO2 2.5% IN AIR

589127 CO2 5% IN N2 95% SG10

592584 CO2 5% IN N2 95% SG50

247


Nitrogen mixtures

EETTHAHANONOLL



Features


Benefits



serial number





682369 ETHANOL 250 PPM IN N2

782549 ETHANOL IN N2 450 PPM SP

248


Disposables

MINIMIX DMINIMIX DISISPPOOSSAABBLLE CE CYYLLINDINDEERRSS





782161 AMMONIA 50 PPM IN AIR (SCOTTY 58)

619973 MINIMIX PURE NITROGEN

620070 MINIMIX 2% METHANE IN AIR

625798 MINIMIX O2 2% IN 98% N2

635375 MINIMIX O2 5% IN 95% N2

630343 MINIMIX O2 19% IN N2

619999 MINIMIX CO2 2% IN NITROGEN

619965 MINIMIX 2.5% METHANE-AIR

711952 MINIMIX METHANE 50% VOL. IN N2

620021 MINIMIX 0.6% PROPANE -AIR

739441 MINIMIX PROPANE 1,01% IN AIR

619957 MINIMIX BUTANE 0.9% IN AIR

619932 MINIMIX ISOBUTANE 0.9%AIR

620062 MINIMIX 8% BUTANE 15% CO2

620054 MINIMIX 0.75%PENTANE-AIR

620039 MINIMIX CARBON MONOXIDE



620138 HYDROGEN SULPHIDE/N2 25 PPM (S 58)

734772 4-MIX 250 CO 15 H2S 50LEL CH4 18 OX

741306 4-MIX 50 CO 25 H2S 50LEL CH4 18 OX

249


LEL mixtures

LLEEL MIXL MIXTTUURREESS



Features


Benefits

• These products are delivered in a Unitor cylinder with

its barcode and unique cylinder serial number

• All cylinders are traced and tracked using the UniTrak

system



718437 METHANE 10% LEL IN NITROGEN


620153 METHANE 30% LEL IN AIR

619940 METHANE 40% LEL IN N2


589085 METHANE IN AIR 50% LEL



682344 METHANE IN N2 80% LEL

664243 METHANE 5 VOL% IN N2

682328 METHANE 6.6 VOL% IN N2

656389 METHANE 30 VOL% IN NITROGEN

673715 METHANE IN NITROGEN 50% VOL

682351 METHANE 80 VOL% IN N2

682336 METHANE 99.995 VOL%

589028 ETHYLENE IN N2 35% LEL

589101 ETHYLENE IN AIR 35% LEL

250


588996 PROPANE IN N2 35% LEL

588988 PROPANE IN AIR 35% LEL

620096 PROPANE 40% L.E.L. IN AIR

620047 PROPANE 50% L.E.L. IN AIR

682393 PROPANE PURE 99.5 %

589077 PROPYLENE IN AIR 35% LEL

589143 BUTANE IN AIR 30% LEL

588962 BUTANE IN AIR 35% LEL

588970 BUTANE IN N2 35% LEL

620161 BUTANE 8%VOL,15%CO2 IN N2

712133 BUTYLENE IN AIR 100PPM

589036 BUTYLENE IN AIR 35% LEL

589119 BUTADINE IN N2 35% LEL

620112 ISOBUTANE IN AIR 50% LEL = 0,95%

682377 PENTANE 49% LEL AIR SG10

251


LEL mixtures

PPEENTNTAANE 4NE 49% L9% LEEL IN AL IN AIR CIR C5H12 (5H12 (00..68% V68% VOOLL) IN) INSSGG50 C50 CYYLLINDINDEERR

718 682385



Features


• Composition: 0.68% pentane (C5H12), balance is air.

Equals 49% L.E.L. mixture

Benefits

• This product is delivered in a Unitor cylinder with its

barcode and unique cylinder serial number

• All cylinders are traced and tracked using the UniTrak

system

252


Regulators

RREEGGUULLAATTOOR RR R--510 F510 FOOR SR SPPAANGNGAAS SS SGG10 C10 CYYLLINDINDEERRSS

630 510011

The regulator R-510 is equiped with a flowmeter (0 - 1.3 l/min) and fits all SG10 cylinders.

Features

• Inlet pressure 200 bar

• Fixed outlet pressure

• Adjustable flow 1.3 L per minute

RREEGGUULLAATTOOR FR FOOR SR SCCOOTTTTY 58/VY 58/VI DI DISISPP. C. CYYLLINDINDEERR

718 620013

Features

• Fits on disposable Scotty 58 + VI cylinder

• Fixed flow and fixed outlet pressure

RREEGGUULLAATTOOR FR FOOR MINIMIX DR MINIMIX DISISPPOOSSAABBLLE CE CYYLLINDINDEERR

718 620088

Features

• Fits on disposable Minimix cylinder

• Fixed flow and fixed outlet pressure

BBRRAACCKKEET FT FOOR SR SGG10 C10 CYYLLINDINDEERR

718 619981

A wall-mountable bracket to secure a spangas 10 litre cylinder (SG10) in a professional and safe way.

253

MAMARRINE PINE PRROODDUUCCTTSS Refrigerants

Hycool marine

HYHYCCOOOOL MAL MARRINE 45INE 45

Thermal transfer fluid used in secondary loop solutions such as air conditioning systems, low

temperature systems, process cooling and heat recovery systems.

Features

• Wide application range +50

Benefits

• Ready to use solution does not need to be diluted

• Low energy cost due to low viscosity

• High thermal conductivity gives high volumetric cooling/ heating capacity


Product number Product name Volume in litres

708503 HYCOOL MARINE 45 200L DRUM 200

708511 HYCOOL MARINE 45 25L CAN 25

729871 HYCOOL MARINE 45 1000L IBC 1000

HYHYCCOOOOL BL BLLUUE AE ADDDDITITIVIVE 25 L CE 25 L CAANN

605 708495

Used for detecting leaks in systems using Hycool marine

Features

• A leak is easily detected through blue coloured stains

Benefits

• Reduces risk of system male functioning due to undetected leaks

Technical data

Volume 25 l

Packing, Type CAN

254


R-134a

UUNICNICOOOOL RL R--134A 5134A 57 K7 KG RG REEFFRRIGIGEERRAANTNT

592 905557

A synthetic HFC refrigerant which is harmless to

the ozone layer, this gas is used in a variety of

maritime refrigeration applications such as air

condition systems, reefer box cooling, engine

control room AC and cargo cooling.

Features

• All refillable cylinders are inspected prior to refilling

• Residue refrigerant recovered to prevent

environmental damage

• Content is 100% genuine refrigerant from approved

producer

Benefits

• Worldwide compliance

• Assured quality

• Refillable cylinders

Technical data

Contents 56 L

Weight 57 kg

Colour BLUE

Properties

ODP = 0 (2nd assesment)

GWP = 1300 (2nd assesment)



905557 UNICOOL R-134a 57KG REFRIGERANT

255


R-134a

UUNICNICOOOOL RL R--134A 12.134A 12.5 K5 KG RG REEFFRRIGIGEERRAANTNT

592 905620



maritime refrigeration applications such as air

condition systems, reefer box cooling, engine

control room AC and cargo cooling.

Features





producer

Benefits


• Assured quality


Technical data

Contents 12.3 L

Weight 12.5 kg

Colour BLUE

Properties





905620 UNICOOL R-134a 12.5 KG REFRIGERANT

256


R-22

UUNICNICOOOOL RL R--22 522 57 K7 KG RG REEFFRRIGIGEERRAANTNT

591 905059

A synthetic HCFC refrigerant with an ozone-

depleting potential, this gas is used in a variety

of maritime refrigeration applications for low,

medium and high temperatures (-40 to +16° C).

NOTE: the use of virgin R-22 is banned within

the EU.

Features





producer

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 57 kg

Colour GREEN

Properties

ODP = 0.049 (2nd assesment)


257


R-22

UUNICNICOOOOL RL R--22 12.22 12.5 K5 KG RG REEFFRRIGIGEERRAANTNT

591 905621

A synthetic HCFC refrigerant that has an ozone

depleting potential, this gas is used in a variety

of maritime refrigeration applications such as

low, medium and high temperatures (-40 to

+16° C).

Features




• Content is 100% genuine virgin refrigerant from

approved producer

Benefits


• Assured quality


Technical data

Contents 12.3 L

Weight 12.5 kg

Tare weight 8 kg

Colour GREEN

Properties

ODP = 0.049 (2nd assesment)


258


R-404A

UUNICNICOOOOL RL R--404A 45 K404A 45 KG RG REEFFRRIGIGEERRAANTNT

594 905606



maritime refrigeration applications such as low

and medium temperature applications

(evaporating temperatures of -45 to +8° C).

Features





approved producer

• A long term replacement for R-502 and R-22

• Most suitable for new systems

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 45 kg

Colour ORANGE

Properties





905606 UNICOOL R-404A 45 KG REFRIGERANT

259


R-404A

UUNICNICOOOOL RL R--404A 9404A 9..5 K5 KG RG REEFFRRIGIGEERRAANTNT

594 905623





(Evaporating temperatures of -45 to +8° C).

Features





approved producer

• A long term replacement for R-502 and R-22

• Most suitable for new systems

Benefits


• Assured quality


Technical data

Contents 12.3 L

Weight 9.5 kg

Colour ORANGE

Properties





905623 UNICOOL R-404A 9.5 KG REFRIGERANT

260


R-407C

UUNICNICOOOOL RL R--40407C 57C 52 K2 KG RG REEFFRRIGIGEERRAANTNT

594 905607






Features





producer

• Suitable for new systems and retrofits

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 52 kg

Colour ORANGE-BROWN

Properties





905607 UNICOOL R-407C 52 KG REFRIGERANT

261


R-407C

UUNICNICOOOOL RL R--40407C 11 K7C 11 KG RG REEFFRRIGIGEERRAANTNT

594 905624






Features





producer

• Suitable for new systems and retrofits

Benefits

• Worldwiide compliance

• Assured quality


Technical data

Contents 12.3 L

Weight 11 kg

Colour ORANGE-BROWN

Properties





905624 UNICOOL R-407-C 11 KG REFRIGERANT

262


R-410A

RR--4410A 45 K10A 45 KG RG REEFFRRIGIGEERRAANTNT

594 905608



maritime refrigeration applications such as low,

medium and high temperature applications


Features





producer

• For new systems only

Benefits


• Assured quality


Technical data

Contents 56 LITRE

Weight 45 kg

Colour ROSE




263


R-410A

RR--4410A 910A 9..5 K5 KG RG REEFFRRIGIGEERRAANTNT

594 905627



maritime refrigeration applications such as low,

medium and high temperature applications


Features





producer

• For new systems only

Benefits


• Assured quality


Technical data

Contents 12.3 LITRE

Weight 9.5 kg

Colour ROSE

Properties





905627 UNICOOL R-410A 9.5 KG REFRIGERANT

264


R-417A


593 905637

Environmentally acceptable HFC solution for

replacing ozone depleting refrigerants in existing

refrigeration systems as low, medium and high

temperature applications (evaporating

temperatures of -35 to +25° C). This is a WSS

prefered retrofit solution.

Features





approved producer

• Long term replacement for R-22 and WSS prefered

retrofit solution

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 51 kg

Colour GREEN

Properties





905637 UNICOOL R-417A 51KG REFRIGERANT

265


R-417A


593 905705



refrigeration systems as low, medium and high

temperature applications (evaporating

temperatures of -35 to +25° C). This is a WSS

prefered retrofit solution.

Features





approved producer

• Long term replacement for R-22 and WSS prefered

retrofit solution

Benefits


• Assured quality


Technical data

Contents 12.3 L

Weight 11 kg

Colour Green

Properties





905705 UNICOOL R-417A 11KG REFRIGERANT

266


R-422D

UUNICNICOOOOL RL R--422D 5422D 52 K2 KG RG REEFFRRIGIGEERRAANTNT

593 905710



refrigeration systems.

Features





approved producer

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 52 kg

Colour Light Green

Properties






905710 UNICOOL R-422D 52 KG REFRIGERANT

267


R-427A

UUNICNICOOOOL RL R--42427A 57A 53 K3 KG RG REEFFRRIGIGEERRAANTNT

593 905708




Features





approved producer

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 53 kg

Colour Green

Properties






268


R-507

UUNICNICOOOOL RL R--50507 45 K7 45 KG RG REEFFRRIGIGEERRAANTNT

594 905610






Features





approved producer

Benefits


• Assured quality


Technical data

Contents 56 L

Weight 45 kg

Colour TEAL

Properties





905610 UNICOOL R-507 45 KG REFRIGERANT

269


R-507

UUNICNICOOOOL RL R--50507 97 9..5 K5 KG RG REEFFRRIGIGEERRAANTNT

594 905628

A synthetic HFC refrigerant, harmless to the

ozone layer, this gas is used in a variety of




Features





approved producer

Benefits


• Assured quality


Technical data

Contents 12.3 L

Weight 9.5 kg

Colour TEAL

Properties





905628 UNICOOL R-507 9.5 KG REFRIGERANT

270


Refrigerant recovery cylinders

RREECCOOVVEERRY CY CYYLLINDINDEER 21,R 21,6 L + D6 L + DOOCCUUMEMENTNTSS

599 596544

Small cylinder for recovering refrigerants during

servicing or maintenance work onboard.

Features

• 21.6 L - 50 lbs cylinder

• USDOT 4BA400

• Two connection ports to enable charging of liquid

and extraction of vapour simultaneously

• Connection is 1/4" flare SAE

• Cylinder supplied under vacuum

• Cylinder is clearly identified for 'RECOVERY'

• Comes with a complete documentation kit including

transport label

Benefits

• Easy to carry

• Delivered with filling guideline to protect against over

charging

• Includes transport labels specified by USA DOT

(Dept of Transportation)

Technical data

Water capacity 21.6 l - 50lbs

Colour grey with yellow shoulder

271


Refrigerant recovery cylinders

RREECCOOVVEERRY CY CYYLLINDINDEER 56 L + DR 56 L + DOOCCUUMEMENTNTSS

599 632588

Large cylinder for recovery and storing of

refrigerants during system servicing. Cylinder is

sold to customer and is not part of the cylinder

exchange program.

Features

• 56 L - 123 lbs cylinder

• USDOT 4BW400

• Two connection ports to enable charging of liquid

and extraction of vapour simultaneously

• Connection is CGA 660

• Valve equiped with special diptube to prevent

overfilling

• Cylinder supplied under vacum

• Cylinder is clearly identified for 'RECOVERY'

• Comes with a complete documentation kit including

transport label

Benefits

• Delivered with filling guideline to protect against over

charging

• Includes transport labels specified by the USA DOT

(Dept of Transportation)

Technical data

Water capacity 55.8 l - 123lbs

Colour grey with yellow shoulder

272

MAMARRINE PINE PRROODDUUCCTTSS Gas distribution system

Complete installations for Ox/Ac

CCEENTNTRRAAL INSL INSTTAALLLLAATTIOION FN FOOR AR ACCEETTYYLLEENE +NE +OOXXYYGGEENN

Central distribution installation for single acetylene and oxygen cylinders.

Features

• Includes all items necessary for the gas central room, including signs, racks, equipment and brackets to be screwed

or welded to deck and bulkhead

• Included are also pre-welded unions to be welded to the distribution pipes, and brazed to the evacuation pipes from

the regulator safety valves

• Gas cylinders, cylinder trolley, clamps, bushings and outlet stations should be ordered separately in necessary

quantities.

• If the central is to be placed in two separate rooms, one each for Acetylene and Oxygen respectively, one each of

signs product no. 183202, 526566 and 526558 are needed.

Benefits

• Increases safety

• Cylinders are less subject to physical damage

• Location of cylinders is known to everyone onboard

• Cylinders can easily be removed in case of fire onboard

• No cylinder transport to the worksite needed



233064 GAS DISTR. SYST. 2CYL. 1AC + 1OX.




273


Cylinder racks

RRAACCK FK FOOR CR CYYLLINDINDEERRSS

Cylinder racks for safe storage of one and two cylinders

Features

• Designed for safe and vibration-free storing of 40 L and 50 L gas cylinders on board

• The racks are galvanized for maximum corrosion protection

• Screw and nut in the clamp assembly are of stainless steel to ensure easy and fast removal of the cylinders in case of

fire



RACK FOR 2 CYLINDERS. 176297

RACK FOR 1 CYLINDER. 320358

274


Gas cylinder cabinets

GGAAS CS CYYLLINDINDEER CR CAABBINEINETT

Gas cylinders should be stored in a room(s) on or above the uppermost continuous deck, with direct

access to open deck. As a solution in cases where it is difficult to reserve separate room(s) for the

cylinders, WSS offers specially designed Unitor steel cabinets for mounting on deck.

Features

• The cabinets are available in two sizes: for two or for four cylinders

• The cabinets can be fitted with gas accessories to form a complete cylinder central as to drawings

• Cylinder racks are fitted in the cabinets for the maximum number of cylinders as standard

• 3 mm steel plate is used for the construction of the cabinets

• Lifting lugs and ears for fastening the cabinet to the bulkhead are included

• The door fastener is prepared for padlocking

• The cabinets are shot blasted and primed with zinc compound

• Final painting should be done when mounted, to match the colour of the surrounding bulkheads

Benefits

• Safe storage of cylinders

• Increased storage space

• Fits on every type of ship



576561 CABINET FOR 2 CYLINDERS

536763 CABINET FOR 2 CYLINDERS.



275


High pressure components

HIGHIGH PH PRREESSSSUURRE CE COOMPMPOONENENTNTSS

Spare parts for high pressure distribution

systems



305292 High pressure hose oxygen

520403 High pressure hose acetylene

303198 T-valve for oxygen w bracket and non-return valve

520379 T-valve for acetylen w bracket and non-return valve

302547 Blind plug for T-valve

302539 Connection nut oxygen 1/4"

517078 Connection nut acetylene 1/4"

302505 High pressure expansion pipe oxygen

517086 High pressure expansion pipe acetylene

302992 Closing valve oxygen with bracket

520395 Closing valve acetylene with bracket

511089 Non return valve for oxygen T-valve

520387 Non return valve for acetylene T-valve

276


Low pressure components

LLOOW PW PRREESSSSUURRE CE COOMPMPOONENENTNTS SS SPPAARRE PE PAARRTTSS

Low pressure components spare parts for gas distribution systems



510020 Regulator R-520 for acetylene

510021 Regulator R-520 for oxygen

621565 Low pressure expansion pipe with pre-welded unions for acetylene

621573 Low pressure expansion pipe with pre-welded union for oxygen

585372 Flashback arrestor, in line, for acetylene

682427 Flashback arrestor, in line, for oxygen

320226 Pipe clamp for 20 mm pipes

624684 Bushing for 19.5-23 mm pipe

277


Low pressure components

LLEEAAK DK DEETTEECCTTIOION SN SPPRRAAY 300 MLY 300 ML

610 576389

It is important that all equipment that is part of a

gas system is checked for leaks after assembly

and corrective action taken before use.

Always use leak detector solutions when

looking for gas leakage. Our leak detection

spray TL-4 is perfect for industrial systems.

Don’t use soapy water or washing up liquid.

Ensure the leak detect solution is compatible

with the materials used in the equipment

construction.

The leak test solution should be applied to ALL joints.

• Apply the leak detect solution to joints and any

potential leakage points, such as at the point of

connection of the cylinder valve with the regulator

• You should never apply leak test solution into a

cylinder valve outlet

• If there is any frothing, the system should be

immediately depressurised and the leak corrected

• Do not use the equipment until the leak has been

rectified

• Ensure the area is dry by wiping with a clean lint free

cloth after the check has been completed

• Once the leak has been rectified, re-purge air from

the system prior to use

278


Outlet station

OOUUTTLLEET ST STTAATTIOION 7N 700 C00 COOMPMPLLEETTE WE WITITH SH S5555FFLLAASSHBHBAACCK RK REEGGUULLAATTOORRS AS AND SND STTEEEEL CL CAABBINEINETT

611 550277

The outlet station model 700 for bulkhead

mounting is designed to obtain the highest

degree of safety together with ease of

operation. The standard protective cabinet,

which completely encloses the outlet

equipment, is made of 1.5 mm steelplate.

As standard supply, the outlet station is fitted

with the completely enclosed S55 flashback

arrestors. Alternatively it may be fitted with

model W-66S flashback arrestors. The outlet

stations are delivered complete with installation

instructions and directions for use and

maintenance. A stretch-relief bracket for the

welding hoses is included. Dimensions

(HxWxD): 500x350x160mm

OOUUTTLLEET ST STTAATTIOION 7N 700 W00 WITITH SH STTEEEEL CL CAABBINEINET BT BUUTTWWITITHOHOUUT FT FLLAASSHBHBAACCK AK ARRRREESSTTOORRSS

611 550301

Unitor's outlet station model 700 for bulkhead

mounting is designed to obtain the highest

degree of safety together with ease of

operation. The standard protective cabinet,

which completely encloses the outlet

equipment, is made of 1.5 mm steelplate.

The outlet stations are delivered complete with

installation instructions and directions for use

and maintenance. A stretch-relief bracket for the

welding hoses is included. Dimensions

(HxWxD): 500x350x160mm

279


Outlet station

SSTTEEEEL CL CAABBINEINET FT FOOR OR OUUTTLLEET ST STTAATTIOION 7N 70000

610 550335

The standard protective cabinet, which

completely encloses the outlet equipment, is

made of 1.5 mm steelplate.

Dimensions (HxWxD): 500x350x160 mm

FFIBIBRRE GE GLLAASSS CS CAABBINEINET FT FOOR OR OUUTTLLEET ST STTAATTIOION 7N 70000

611 536805

For open deck mounting, a fibreglass cabinet is

recommended. This strong cabinet is designed

to give a high degree of protection. It is

corrosion-proof, with stainless steel hinges and

lock.

Dimensions (HxWxD): 500x350x160 mm

280


Outlet station

AADDAAPPTTOOR SR SEET FT FOOR OR OUUTTLLEET ST STTAATTIOION 7N 70000

610 550327

When mounting the current outlet station 700 to

an excisting piping set made for the old R-21

regulators, a adaptor set is required to fit beteen

the swivel nuts and the ball valves of the outlet

station.

TTWWIN VIN VAALLVVE UE UNIT FNIT FOOR OR OUUTTLLEET ST STTAATTIOION 7N 70000

610 550319

The twin valve unit consist of two ballvalves

mounted on a rail. Position 13 on the attached

drawing.

281


Outlet station

RREEGGUULLAATTOOR RR R--5530 F30 FOOR AR ACCEETTYYLLEENENE

611 510030

The secudairy regulator will regulate the

acetylene pressure from the distribution piping

to the twinhose.

Position 14 in the drawing.

RREEGGUULLAATTOOR RR R--5530 F30 FOOR OR OXXYYGGEENN

611 510031

The regulator will regulate the pressure from the

distribution piping to the twin hose.


282


Outlet station

SSTTRREETTCCH RH REELLIEIEF BF BRRAACCKKEET FT FOOR TR TWWINHOINHOSSEE

611 235010

A stretch relief bracket is mounted under the

outlet station to relief any stresses from the

hanging rubber twinhose that is applied on the

hosejoints.


283


Shielding gas installations

SSHIEHIELLDDING GING GAAS INSS INSTTAALLLLAATTIOION FN FOOR CR CYYLLINDINDEERRSS

The Gas Distribution System for shielding gases is designed to give our customers the highest

efficiency and economy, and at the same time increasing the safety on board. The System is delivered

complete with manifold system with non-return valves, high pressure flexible hoses, fastening racks for

cylinders, shut off valve, regulator, low pressure expansion pipe and a "Gas under pressure" sign. The

system is designed for a working pressure of 200 bar.



593608 CENTRAL INST. SHIELDING

593616 CENTRAL INST. SHIELDING.

284

�� 2�� !" "# 3�� )�� /0$ �� %��& �'��2&��$�(��)�'*

�� 2�� !" "# 3�� )�� /0$ �� %��& �'��2&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING




REFRIGERATION EQUIPMENT

The Wilhelmsen Ships Service range of refrigeration equipment, lubricants, package equipment, system equipment and tools are designed to work together with our range of gases, refrigerants and cylinders and have been formulated to meet local and international regulation whilst protecting operational costs and promoting positive environmental practises.

MAMARRINE PINE PRROODDUUCCTTSS Refrigeration equipment

Lubricants

RREEFFRRIGIGEERRAANT ONT OILIL, P, POOEE, L, LOOW TW TEEMPMPEERRAATTUURREE

605 587709

The Emkarate series is a range of synthetic refrigeration oils formulated from polyolester base stock.

They are specifically designed for use with refrigeration systems using environmentally friendly HFC

refrigerants.

A range of different types and brand of refrigeration oils is available on request from the WSS Spare

Part Centres.

Features

• The synthetic base stocks used in the Emkarate RL32 range are fully miscible with HFCs, even at temperatures well

below the minimum likely to be encountered in service.

• Emkarate RL32 grades have been formulated using a unique low treatment additive package to enhance hydrolytic

stability, load carrying and inhibition against copper plating.

• They are wax free and hence have very low pour points. This makes sure that evaporator internals remain clean

(consequently efficient heat transfer) and avoids pipe blockages.

Technical data

Packing Size 5 L CAN

TEV Manufacturer EMKARATE RL32

Relative Density at 20° C 0.92

Viscosity at 40° C 32

Viscosity at 45° C 5.5

Viscosity Index 110

Closed Flash Point, C° 252

Pour Point, C° -54

The compressor is the heart of any refrigeration system and

it is recommended that the system oil is changed or tested

at regular intervals.

This could be on an annual basis or more frequently if the oil

becomes dark or cloudy.

A good rule is to renew the oil if a major service or repair has

been carried out on the compressor or the system.

Emkarate RL32 is generally used for low temperature

applications like provision systems. Compatible with all HFC

refrigerants.

The synthetic base stocks used in the Castrol Icematic SW

range are fully miscible with HFCs, even at temperatures well

below the minimum likely to be encountered in service.

Emkarate grades have been formulated using a unique low

treatment additive package to enhance hydrolytic stability,

load carrying and inhibition against copper plating. They are

wax free and hence have very low pour points. This makes

sure that evaporator internals remain clean (consequently

efficient heat transfer) and avoids pipe blockages.

288


Lubricants

RREEFFRRIGIGEERRAANT ONT OILIL. P. POOEE, HIG, HIGH TH TEEMPMP

605 587691

The Icematic SW series is a range of synthetic refrigeration oils formulated from polyolester base stock.

They are specifically designed for use with refrigeration systems using environmentally friendly HFC

refrigerants.

Features

• The synthetic base stocks used in the Castrol Icematic SW range are fully miscible with HFCs, even at temperatures

well below the minimum likely to be encountered in service.

• Icematic SW grades have been formulated using a unique low treatment additive package to enhance hydrolytic

stability, load carrying and inhibition against copper plating.

• They are wax free and hence have very low pour points. This makes sure that evaporator internals remain clean

(consequently efficient heat transfer) and avoids pipe blockages.

Technical data

Packing Size 5 L

TEV Manufacturer CASTROL ICEMATICSW68

Viscosity at 40° C 68

Viscosity 100° C 8.7

Viscosity Index 100

Closed Flash Point, C° 260

Pour Point, C° -39

A range of different types and brand of refrigeration oils is

available on request from the WSS Spare Part Centres.








Icematic SW 68 is generally used for high temperature

applications like A/C systems. Compatible with all HFC

refrigerants.

289


Lubricants

RREEFFRRIGIGEERRAANT ONT OILIL, MINE, MINERRAALL, HIG, HIGH TH TEEMPMP

605 664136

The Castrol range of mineral based refrigeration oils is available as two grades of specially selected oils,

highly refined to provide chemical and thermal stability. Low wax forming tendencies ensure low pour

points.

A range of different types and brands of refrigeration oils is available on request from WSS Spare Part

Centres.

Technical data

Packing Size 20 L

TEV Manufacturer CASTROL ICEMATIC 299

Relative Density at 20° C 0.92



Flash Point, C° 183

Pour Point, C° -36

Floc Point, C° -48








Icematic 299 is generally used for high temperature

applications like A/C systems. Compatible with HCFC

refrigerants like R-22 and some HFC refrigerants like Unicool

R-417A.

Because of its low floc points and good solubility with

fluorocarbon refrigerants, particularly R22, this oils have

virtually superseded the Icematic 99 oils in all marine


Castrol Icematic 299 is approved to Carrier Specification

PP33-2 and PP36-1.

290


Package Equipment

UUNITNITOOR DR DRRINKINKING WING WAATTEER CR COOOOLLEERR, 230 V, 230 V

607 708552

Marine drinking water cooler for ships crew

Features

• Designed to operate under demanding climatic conditions

• Stainless steel construction makes it corrosion resistant

• Fittings in brass for longer service life

• Includes instruction and spare part manual

• CE approved

Benefits

• Silent operation

• Uses environmental acceptable R-134a refrigerant

Technical data

Length 310 mm

Width 310 mm

Height 1050 mm

Weight 22 kg

Power supply Voltage 1PH. 230 V 50/60 Hz

Power Supply Amperage 2.6 A

The Unitor Drinking Water Cooler is made to operate in the

most demanding climatic conditions. It is constructed of

stainless steel, making it resistant to corrosion and easy to

keep clean. Fittings are in brass for long service life. The unit

is silent in operation and runs on R-134a refrigerant that

functions in the medium pressure range, reducing wear and

tear on the system.

Approvals

CE

291


Package Equipment

UUNITNITOOR DR DRRINKINKING WING WAATTEER CR COOOOLLEERR, 115 V, 115 V

607 711333

Marine drinking water cooler for ships crew

Features

• Designed to operate under demanding climatic conditions

• Stainless steel construction makes it corrosion resistant

• Fittings in brass for longer service life

• CE approved

• Includes instruction and spare part manual

Benefits

• Silent operation

• Uses environmental acceptable R-134a refrigerant

Technical data

Length 310 mm

Width 310 mm

Height 1050 mm

Weight 22 kg

Power supply Voltage 1PH. 110 V 50/60 Hz

Power Supply Amperage 5.1 A

The Unitor Drinking Water Cooler is made to operate in the

most demanding climatic conditions. It is constructed of

stainless steel, making it resistant to corrosion and easy to

keep clean. Fittings are in brass for long service life. The unit

is silent in operation and runs on R-134a refrigerant that

functions in the medium pressure range, reducing wear and

tear on the system.

Approvals

CE

292


System Equipment and Accessories

RREEFFRRIGIGEERRAANT CNT CHAHARRGGING SING STTAATTIOION UN UCCSS--200200

601 625186

The UCS-200 has been designed to minimise

refrigerant loss and system contamination

during the charging process.

The system comes with replaceable core drier

for moisture and contamination removal, a sight

glass with moisture indicator to visualise the

flow of refrigerant and various isolating valves.

There is also a relief valve for added safety.

Features

• Replaceable drier core

• Connection for vacuum pump and recovery unit

• Sight glass to monitor flow and refrigerant condition

• Non-return valve to prevent back flow into cylinder

• Relief valve to protect against high pressure

• Steel pipe and rigid construction

• Complies with environmental regulations

Benefits

• Simple layout

• Easy to operate

• Safe process control

Accessories


548255 LIQUID LINE DRIER CORE 48 DN.

548206 FILTER DRIER SHELL-7/8.

650349 CHECK VALVE 1/2 INCH.

649726 RELIEF VALVE 350PSI.

650055 STOP VALVE (ANGLE).

650020 STOP VALVE (ANGLE).

522441 REDUCER FEMALE X MALE.

564591 CAP NUT 1/4" FLARE N5-4.

650993 FLARE TO SOLDER CONNECTOR.

510933 COPPER GASKET.

651077 MOISTURE INDICATOR INSERT.

293



LLIQIQUUID LID LINE DINE DRRIEIER CR COORRE 48 DE 48 DNN

604 548255

Spare core for filter drier that is part of UCS-200

charging station.

Technical data

Length 138 mm

Diameter 95 mm

Inside Diameter 44 mm

TEV type DCR 48DN

CCHAHARRGGING HOING HOSSE HP 13E HP 1350 MM50 MM

601 510826

An high pressure charging hose for charging

refrigeration systems

Features

• Stainless steel braiding for added strength

• 1350 mm length

• Snap on connections

Product code: UCH-135

294



CCYYLLINDINDEER SR STTAANDND

601 513564

A stand for Unicool cylinders to secure the

cylinders during voyage against movement.

Features

• Cylinders are secured free from the deck by two

clamps Clamps are of quick release type to ensure

timely removal of cylinders in case of emergency

• Hot dip galvanized steel

• Fits all WSS Unicool 56 L refrigerant cylinders

Product code: UCA-001

TTOOP VP VAALLVVE AE ADDAAPPTTOOR SR SEET FT FOOR UR UNICNICOOOOLLRREEFFRRIGIGEERRAANT CNT CYYLLINDINDEERRS US UVVAA--000011

601 544932

Used when connecting a charging hose to the

Unicool refrigerant cylinder valve.

Features

• Package with 4 adaptors: two 1/4" SAE flare and

two 3/8" SAE flare

• O-ring included

Technical data

Product code UVA-001

Cylinder connection CGA 660

Outlet Male flare SAE 1/4"

Outlet Male flare SAE 3/8"

295



CCOOLLLLEECCTTIOION ON OF FF FITITTTINGINGSS, 1/, 1/4 - 34 - 3//8"8"

601 636431

An assorted collection of the most common

types of brass fittings that are used in various

refrigeration piping and connection applications.

Items are not sold individually.

For 3/8 - 5/8", please use part number 636449

Features

• Comprehensive selection

Benefits

• Handy for repairs or system maintenance


Supplied with:

Plug P2 4, 1/4" flare (3 pcs)

Union TEE T2-4, 1/4" flare (3 pcs)

Reducing Union TEE TR2-64, 3/8" + 3/8" x 1/4" (1 pc)


Connector U3-4A female, 1/4" fl x 1/8" pipe thread (1 pc)

Connector U3-4B female, 1/4" fl x 1/4" pipe thread (1 pc)

Connector U3-6B female, 3/8" fl x 1/4" pipe thread (2 pc)

TEE T 6-4, 2 x 1/4" male, 1 x 1/4" female (1 pc)

Connector U1-4A male, 1/4" fl x 1/8" pipe thread (3 pcs)

Connector U1-4B male, 1/4" fl x 1/4" pipe thread (3 pcs)

Connector U1-6B male, 3/8" fl x 1/4" pipe thread (3 pcs)

Union U2 -4, 1/4" flare (5 pcs)

Reducing Union UR2-64, 3/8" x 1/4" flare (3 pcs)

Reducing Union UR2-84, 1/2" x 1/4" flare (2 pcs)

Manifold Union coupling US-4-4, 1/4" x 1/4" flare (2 pcs)

Reducing UR3-46, 1/4" female x 3/8" male (2 pcs)

Reducing UR3-48, 1/4" female x 1/2" male (1 pc)


296



CCOOLLLLEECCTTIOION ON OF FF FITITTTINGINGSS, 3, 3//8 - 58 - 5//8"8"

601 636449

An assorted collection of the most common

types of brass fittings that are used in various

refrigeration piping and connection applications.

Items are not sold individually.

For 1/4 - 3/8", please use part number 636431

Features

• Comprehensive selection

Benefits

• Handy for repairs or system maintenance


Supplied with:

Plug P2-6, 3/8" flare (2 pcs)

Plug P2-8, 1/2" Flare (1 pc)

Union TEE T2-6, 3/8" flare (2 pcs)

Union TEE T2-8, 1/2" flare (1 pc)

Union TEE T2-10, 5/8" flare (1 pc)


Connector U1-6C male, 3/8" fl x 3/8" pipe thread (1 pc)

Connector U1-8C male, 1/2" fl x 3/8" pipe thread(3 pcs)

Union U2-6, 3/8" flare (3 pcs)

Union U2-8, 1/2" flare (2 pcs)

Union U2-10, 5/8" flare (1 pc)

Reducing Union UR2-86, 1/2" x 3/8" flare (1 pc)

Reducing Union UR2-108, 5/8" x 1/2" flare (1 pc)

Manifold Union coupling US-4-6, 3/8" x 3/8" flare (1 pc)

Manifold Union coupling US-4-8, 1/2" x 1/2" flare (1 pc)




297



FFIXIXEED LD LEEAAK DK DEETTEECCTTOOR KR KITIT, 4 C, 4 CHAHANNENNELL, MR, MRDD4S4S--2L2L

607 708016

To detect leakages of refrigerants onboard your

vessel's refrigeration systems, the leak kit

MRD4S enables you to monitor up to 4

locations for the presence of CFC, HCFC and

HFC's. The semi conductor sensors are easy to

install and with their chemical stable design give

you an inexpensive solution to comply to LRS/

DNV requirements.

Features

• Inexpensive, robust and long-lasting semi-conductor

technology

• Can detect multiple refrigerants simultaneously

• 2 level alarm system:

• Low level alarm resets automatically once the atmosphere is clear as found in intermittent leaks

• High level alarm needs to be manually reset after the leak has been rectified. Use Unitor's electronic hand held

leak detector UNIRX-1A Part No 536946 for identifying leaks

• Relatively easy to install, requires no special preparations and low maintenance requirements

• Economical solution

• Can be connected to existing engine room alarm systems

• Comes in 220 V with an option for 110 V

• IP42

Benefits

• Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in

enclosed spaces.

• Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks

Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by

instantaneous warning of leaks

• Class Compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV

Clean notation

Semi-conductors for halocarbons may be used to detect

more than one gas or a mixture of gases simultaneously.

This is particularly useful in monitoring a plant room with a

number of different refrigerants.

**Kit also available with 6 channel monitor (Part No 708018)


Supplied with:

• 4 channel monitor for up to 4 sensors

• 2 MSPH sensors (new type)

• 100 m, 4 core screened cable 7/0.2 mm

• Cable glands, 12 V siren and keys

298

Accessories


708073 REFRIGERANT GAS SENSOR CABLE

708057 REFRIGERANT GAS SENSOR AHU OR DUCT

708032 REFRIGERANT GAS SENSOR IP66

708024 REFRIGERANT GAS SENSOR

708040 REFRIGERANT GAS SENSOR VENT PIPE

299



FFIXIXEED LD LEEAAK DK DEETTEECCTTOOR KR KITIT, 6 C, 6 CHAHANNENNELL, MR, MRDD6S6S--2L2L

607 708018

To detect leakages of refrigerants onboard your vessel's refrigeration systems, the leak kit MRD4S

enables you to monitor up to 4 locations for the presence of CFC, HCFC and HFC's. The

semiconductor sensors are easy to install and with their chemical stable design give you an inexpensive

solution to comply to LRS/DNV requirements.

Features

• Inexpensive, robust and long-lasting semi-conductor technology










• IP42

Benefits


enclosed spaces

Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks

Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by


Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV

Clean notation

Semiconductors for halocarbons may be used to detect




**Kit also available with 4 channel monitor (Part No 708016)


Supplied with:





300

Accessories


708073 REFRIGERANT GAS SENSOR CABLE

708057 REFRIGERANT GAS SENSOR AHU OR DUCT

708032 REFRIGERANT GAS SENSOR IP66

708024 REFRIGERANT GAS SENSOR

708040 REFRIGERANT GAS SENSOR VENT PIPE

301



FFIXIXEED LD LEEAAK DK DEETTEECCTTOOR KR KIT 4 CIT 4 CHAHANENELLS IPS IP6666

607 767079

To detect leakages of refrigerants onboard your vessel's refrigeration systems, the leak kit MRD4S

enables you to monitor up to 4 locations for the presence of CFC, HCFC and HFC's. The semi

conductor sensors are easy to install and with their chemical stable design give you an inexpensive

solution to comply to LRS/DNV requirements. IP Class is 66

Features

• Inexpensive, robust and long-lasting semi-conductor technology










• IP66

Benefits


enclosed spaces.


• Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by


• Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV

Clean notation

Semi-conductors for halocarbons may be used to detect





Supplied with:





Approvals

CE

302



FFIXIXEED LD LEEAAK DK DEETTEECCTTOORR, MS, MSPPH SH SEENSNSOORR

607 708024

This is the new and improved refrigerant leak

detection sensor for general application.

Can be used for detecting all the CFC, HCFC,

HFC refrigerants and hydrocarbons.

NB: Special sensors for Ammonia available on

request

Features

• Working temperature range -20° C to +50° C (-4° F

to +122° F)

• IP 41 rated

• Improved sensor housing

• Improved sensor with filter to minimise false alarms

from background gases

• Improved sensor PCB design with incorporated test

points

• Simplified annual maintenance / testing procedures

• Field adjustments to the sensor sensitivity can be

carried out very easily. Sensitivity can be set as low

as 100 ppm

• Factory supply setting is 500 ppm for low level and

1,000 ppm for high level

Benefits

• Crew safety: safeguards crew members from long-

term exposure to high levels of leaked refrigerant gas

in enclosed spaces

• Cost saving: helps reduce costs due to accidental

loss of refrigerants from unmonitored leaks

• Environmentally sound solution: reduces the risks

of global warming and damaging the ozone layer by instantaneous warning of leaks


Clean notation

303



FFIXIXEED LD LEEAAK DK DEETTEECCTTOORR, IP, IP66 S66 SEENSNSOORR

607 708032

This is the new and improved refrigerant leak detection sensor for use in areas of high humidity or

water ingress such as in cold rooms or in refrigerated cargo hold battery spaces for direct expansion

systems.

Can be used for detecting all the CFC, HCFC, HFC refrigerants and hydrocarbons.

NB: Special sensors for Ammonia available on request

Features

• Working temperature range -40° C to +50° C (-40° F to +122° F)

• Improved sensor housing IP66 with Delrin head for high humidity, wash down areas, and fast response

• Improved sensor with filter to minimise false alarms from background gases

• Improved sensor PCB design with incorporated test points


• Field adjustments to the sensor sensitivity can be carried out very easily. Sensitivity can be set as low as 100 ppm

• Factory supply setting is 500 ppm for low level and 1,000 ppm for high level

Benefits


enclosed spaces





Clean notation

304



FFIXIXEED LD LEEAAK DK DEETTEECCTTOORR, S, SAAFFEETTY VY V//V VV VEENT PNT PIPIPEESSEENSNSOORR

607 708040

This is the new and improved refrigerant leak detection sensor for mounting on the vent pipes of

system safety / relief valves to detect either leaking valves or activated ones.



Features


• IP 41 rated






Benefits


enclosed spaces





Clean notation

305



FFIXIXEED LD LEEAAK DK DEETTEECCTTOORR, A, AHUHU/D/DUUCCT ST SEENSNSOORR

607 708057

This is the new and improved refrigerant leak detection sensor for mounting in the duct pipes of A/C Air

Handling Unit outlets to detect refrigerant leaks from evaporator coils.



Features


• IP 56 rated






Benefits


enclosed spaces





Clean notation

FFIXIXEED LD LEEAAK DK DEETTEECCTTOORR, 4 C, 4 COORRE CE CAABBLLEE

607 708073

This is a 0.2 mm, 4-core screened cable for connecting the sensor heads to each channel on the

monitor.

The cable is classed as halogen free.

Features

• 100 m coil

• Screened cable

306


Tools

DDIGIGITITAAL DL DUUAAL TL THEHERRMOMOMEMETTEERR

606 584417

The multifunction thermometer provides functions such as "auto power off", "auto-ranging", "relative

measurement", "record Max./Min.". Operation of the thermometer is intuitive - with explanatory labels

on the membrane keys, and mode and status displayed on the LCD display.

NB: Supplied without probes. Please specify probe type for suitable temperature

Features

• Can measure temp difference between two points, during system check

• Memory-in function up to ten data can be stored

• Records max and min values during measurement and system adjustments

• User calibration function by operating the panel keys

• Power two AA size (LR6) batteries included

• Lightweight 180 g

• CE approved in compliance with EMC standards, protection class IP 54

Accessories


584433 AIR PROBE

584425 SURFACE PROBE

589994 NEEDLE PROBE

602813 WIRE THERMOCOUPLE PROBE

597385 MARINE THERMOMETER CASE

307


Tools

MAMARRINE TINE THEHERRMOMOMEMETTEER KR KIT UIT UTTKK--100100

606 597377

The thermometer and probes are conveniently

housed in a sturdy carrying case. All items are

available individually. The multifunction

thermometer provides functions such as "auto

power off", "auto-ranging", "relative

measurement", "record Max./Min.".

Operation of the thermometer is intuitive - with

explanatory labels on the membrane keys, and

mode and status displayed on the LCD display.

Features

• Can measure temp difference between two points,

during system check

• Memory-in Function up to ten data can be stored

• Records max and min values during measurement

and system adjustments

• User calibration function by operating the panel keys

• Power two AA size (LR6) batteries included

• Light weight 180 g

• CE approved in compliance with EMC standards,

protection class IP 54

• Comes with 3 different probes such as air probe,

surface probe and needle probe

• Additional two unshielded thermocouples

Benefits

• Accurate

• Lightweight

Technical data

Length 100 mm

Width 450 mm

Height 360 mm

Weight 1.9 kg



597377 MARINE THERMOMETER KIT

308

Accessories


584417 DIGITAL DUAL THERMOMETER

584433 AIR PROBE

584425 SURFACE PROBE

589994 NEEDLE PROBE

602813 WIRE THERMOCOUPLE PROBE

597385 MARINE THERMOMETER CASE

309


Tools

SSUURRFFAACCE PE PRROOBBE TE THEHERRMOMOMEMETTEERR

606 584425

Surface probe thermometer to be used with digital thermometer 584417

Features

• Standard thermocouple connections

• Temperature range -50 to + 500° C

AAIR PIR PRROOBBE TE THEHERRMOMOMEMETTEERR

606 584433

Air probe thermometer to be used with digital thermometer 584417

Features

• Standard thermocouple connection

• Temperature range -50 to +500° C

310


Tools

NENEEEDDLLE PE PRROOBBE TE THEHERRMOMOMEMETTEERR

606 589994

Needle probe thermometer for digital thermometer 584417

Features

• Standard thermocouple connection

• Working range -50 to +600° C

WWIRIRE TE THEHERRMOMOCCOOUUPPLLE PE PRROOBBEE

606 602813

Unshielded thermocouple to be used with digital

thermometer 584417

Features

• Standard thermocouple connections

• Temperature range -50 to + 400° C

311


Tools

INRINRAAFFRREED TD THEHERRMOMOMEMETTEERR

606 737668

The infra-red thermometer is a sturdy IR-

thermometer designed for easy temperature

measurement of refrigeration systems or other

engine room equipment and machinery to

quickly obtain surface temperature readings

when assessing system performance.

Frequent use of this thermometer will prove

useful when planning maintenance, but also

during trouble-shooting, insulation check,

system adjustment and balancing.

Features

• Sturdy construction

• Wide temperature range

• Memory function

Benefits

• Hip holster makes it easy to carry around

• Easy to use

• Batteries are included

Technical data

Temperature Range -50 to +400° C (-58° F to +752° F).

Accuracy +/- 2 % of reading

Resolution 0.1° C / °F

Response Time 1 sec

Ambient Operating

Temp.

0 to 50° C (32 to 122° F)

Relative Humidity10 to 90 % RH non-condensing, at < 30° C

(86° F) ambient

Battery life 14 to 18 hours of continuous use

Dimensions 175 x 39 x 72 mm

Weight 179 g including batteries

Emissivity 0.95 fixed

312


Tools

VVAACCUUUUM PM PUUMPMP, S, STTAANDNDAARRDD, 115, 115/230 V/230 V

606 587568

The vacuum pump is used for removing

moisture and non-condensable gases from

refrigeration systems after maintenance or

repair.

Features

• Two stage pump for deep vacuum

• Dual voltage (115/230 V) and frequency model (50/

60 Hz)

• Achievable rating as low as 20 microns

• Displacement 113 l/min

Benefits

• Built in isolating valve isolates the pump from the system with only a 1/4 turn, making it simple to measure rate of rise

• Can be used on systems using CFC, HCFC and HFC in ombination with mineral oil, polyester oil, alkyl benzeen oil

and PAG oil

• Referred to as “the long term trouble avoider” among refrigeration specialists

Technical data

Product code UVP-15401

Displacement 113 l/min - 4CFM

Weight 12 kg

Connections 1/4" and 1/2"

Vacuum oil capacity 445 ml

313


Tools

VVAACCUUUUM PM PUUMPMP, HE, HEAAVVY DY DUUTTYY, 115, 115/230 V/230 V

606 597658

The heavy duty pump is used for removing

moisture and non-condensable gases from

large refrigeration installations.

Features

• Two stage deep vacuum

• Dual voltage (115/230 V) and frequency model (50/

60 Hz)

• Achievable rating as low as 20 microns

• Displacement 280 l/min

Benefits

• Built in isolating valve isolates the pump from the

system with only a 1/4 turn, making it simple to measure rate of rise

• Can be used on systems using CFC, HCFC and HFC in ombination with mineral oil, polyester oil, alkyl benzeen oil

and PAG oil

• Referred to as “the long term trouble avoider” among refrigeration specialists

Technical data

Product code UVP-15121A

Displacement 282 l/min - 10CFM

Weight 18 kg

Connections 1/4" and 1/2"

Vacuum oil capacity 488 ml

314


Tools

VVAACCUUUUM PM PUUMP OMP OIL 0IL 0..995 L5 L

606 320424

UVO-1 dual-purpose vacuum pump oil is made

from a paraffinic mineral oil base, to be used in

deep vacuum applications.

Features

• It contains an anti sludge agent that breaks up water,

dirt and oil combinations, allowing the water to

separate from the oil

• Excellent for old and new vacuum pumps

• For cleaning and lubricating of the pump at the same

time

Product code: UVO-001

VVAACCUUUUM GM GAAUUGGE 0-E 0-1000 MB1000 MBAARR

606 540104

Standard round vacuum gaume gauge with

diameter of 60 mm

Features

• Wall mountable using screws

• Glycerine filled

• Scale from 1000 - 0 mbar

• Connection is 1/8" BSP Male; down

Product code: UVG-25

315


Tools

DDIGIGITITAAL VL VAACCUUUUM GM GAAUUGGE UE UVVGG--6464

606 711507

Gauge to determine that the proper system

vacuum has been obtained. Supplied with 9 V

battery.

Features

• User friendly digital LCD display

• Range from atmospheric pressure down to 0

microns

• Resolution at low end of the scale is 1 micron

• Option to show time graph to see change in vacuum

pressure

• Over pressure protection (35 bar)

• Convenient hanger at the back

• Supplied in a soft case including battery

Product code: UVG-65

316


Tools

EELLEECCTTRROONIC VNIC VAACCUUUUM GM GAAUUGGE UE UVVGG--150150

606 597666

Gauge to determine that the proper system

vacuum has been obtained. Supplied with 9 V

battery and calibration tool.

Features

• User friendly "traffic light" LED display

• Range from atmospheric pressure down to 50

microns

• Over pressure protection

• Convenient hanger at the back

• Supplied in a soft case including battery

Benefits

• This electronic vacuum gauge will also “indicate” if

the system is not leak tight

• Instruction on how to differenciate between moisture

in the system and leaks

Technical data

Product code UVG-150

Connections 1/4" SAE flare

Battery 9 V

317


Tools

CCHAHARRGGINGING/V/VAACCUUUUM HOM HOSSE UE UCCH-H-772Y2Y

606 535070

3/8" hose to connect between Unicool

refrigerant cylinder (use adaptor set 544932)

and refrigeration system or used for larger

vacuum jobs

Features

• High quality hose material

• Both ends have 3/8" SAE flare female connection

• Embedded O-ring seals for positive seal

Benefits

• Flexible even in low teperatures without colapsing

• Approved for high pressure blends

Technical data

Product code UCH-72-Y

Length 1.8 m - 6 ft

Connection 3/8" SAE flare Female

Colour Yellow

318


Tools

VVAACCUUUUM VM VAALLVVE AE ASSSSEEMBMBLLYY

606 513382

A brass valve assembly that give maximum control during evacuation and recharging.

Features

• 1/2" SAE flare female connection to fit directly on vacuum pump

• 1/4" SAE flare connection for vacuum gauge connection

• 3/8" SAE flare connection for system connection

• Large internal port for maximized flow

Benefits

• Easy to use

• Excellent control over process

Technical data

Product code UVS-13047A

Connection 1 1/2" SAE flare female

Connection 2 1/4" SAE flare male

Connection 3 3/8" SAE flare male

319


Tools

HAHAND OND OIL PIL PUUMP 5 L & 25 L DMP 5 L & 25 L DRRUUMSMS

606 597534

High pressure hand oil pump designed to allow technicians to pump refrigeration oil into the system or

compressor crankcase while the unit is in operation, no need for system shutdown during oil charge.

Features

• Pump outlet 1/4" SAE flare

• Pump pressure upto 17 bar

• Universal tapered adapter that fits all oil container necks

Benefits

• Delivered with acessory kit for removal of oil from crankcase, suction accumulator or simmilar

• Fits all standard cans (5 and 25 L)

AACCID TID TEESST KT KIT MINEIT MINERRAAL + AL + AB OB OILILSS

606 540088

Test kit for determining acid contamination in mineral or alkylbenzene oils

Features

• Simple sampling and testing

• Quick result

AACCID TID TEESST KT KIT PIT POOE OE OILILSS

606 607828

Test kit for determining acid contamination in polyolester oil

Features

• Simple sampling and testing

• Quick result

320


Tools

RREEFFRRIGIGEERRAANT LNT LEEAAK DK DEETTEECCTTIOION KN KITIT, U, UV TV TRRAACCEERRKKIT 220IT 220/2/240 V40 V

606 587170

Effective tool for locating refrigerant leaks in

refrigeration systems in inaccsessible areas by

circulating the tracer fluid and using UV-light.

Features

• Oil based fluorescent liquid fully miscible with

refrigerant compressor oil

• Circulates in system and leaves fluorescent trace if

leak

Benefits

• Ready to use kit

Product code: UV1160F

Glo-Leak tracer fluid is an oil based fluorescent liquid that is

fully miscible and compatible with refrigerants and

compressor oil. When added to the compressor oil sump,

the tracer fluid circulates around the system with the

compressor oil. Evidence of the tracer fluid will be found at

the source of each leak. This will give a fluorescent glow

when the area is scanned with the UV inspection lamp,

easily identifying the location of the leak.



587170 U.V. TRACER KIT 220V/240V

606268 U.V. TRACER FLUID 250ML


602334 U.V. TRACER FLUID 5 LTR

596536 SPARE BULB 110/220V 100W

606465 GLO-KLENZ CLEANER

Supplied with:

• UV Inspection lamp 220/240 V (1 pc)

• Spare bulb (1 pc)

• 250 ml tracer fluid (GL 1483A Mineral oil) (4 bottles)

• Protective goggles (1 pc)

• Instructions (1 set)

• Carrying case (1 pc)

321


Tools

RREEFFRRIGIGEERRAANT LNT LEEAAK DK DEETTEECCTTIOION KN KITIT, U, UV TV TRRAACCEERRKKIT 12 VIT 12 V

606 711523

Effective tool for locating refrigerant leaks in refrigeration systems in inaccsessible areas by circulating

the tracer fluid and using UV-light. A rechargeable battery gives complete freedom on where to use the

kit.

Features

• Oil based fluorescent liquid fully miscible with refrigerant compressor oil

• Circulates in system and leaves fluorescent trace if leak

• 110 V and 220 V charger included

• 12 V - 7 Ah battery gives a long operating time up to 30 minutes

Benefits

• Ready to use kit

Technical data

Product code UV2100U+

Operating Voltage 12 V

Glo-Leak tracer fluid is an oil based fluorescent liquid that is

fully miscible and compatible with refrigerants and

compressor oil. When added to the compressor oil sump,

the tracer fluid circulates around the system with the

compressor oil. Evidence of the tracer fluid will be found at

the source of each leak. This will give a fluorescent glow

when the area is scanned with the UV inspection lamp,

easily identifying the location of the leak.



711523 U.V. TRACER KIT 12V




596551 SPARE BULB 12V 100W

606465 GLO-KLENZ CLEANER

Supplied with:

• UV Inspection lamp 12 V (1 pc)

• 220 V Battery charger

• 110 V battery charger

• Battery 12 V - 7 Ah

• Spare bulb (1 pc)

• 250 ml tracer fluid (GL 1483A Mineral oil) (4 bottles)

• Protective goggles (1 pc)

• Instructions (1 set)

• Carrying case (1 pc)

322


Tools

RREEFFRRIGIGEERRAANT LNT LEEAAK DK DEETTEECCTTIOION, UN, UVV, T, TRRAACCEERRFFLLUUID FID FOOR MINER MINERRAAL OL OILIL

This tracer fluid for mineral oil comes in both 250 ml and 5 liter containers. It is used in combination

with the UV Fluorescent leak detection system for finding leaks in refrigeration systems.

Evidence of the tracer fluid will be found at the source of the leak and glow under the light of a UV

detection lamp.





323


Tools

RREEFFRRIGIGEERRAANT LNT LEEAAK DK DEETTEECCTTIOION, UN, UVV, U, UNIVNIVEERRSSAALLTTRRAACCEER FR FLLUUID FID FOOR AR ALLL OL OIL TIL TYYPPEESS

606 606268

A universal tracer fluid for all types of oil comes in a 250 ml plastic bottle. It is used in combination with

the UV Fluorescent leak detection system for finding leaks in refrigeration systems.

Evidence of the tracer fluid will be found at the source of the leak and glow under the light of a UV

detection lamp.

Features

• Applicable for PAG, POE, PAO and mineral oil

Benefits

• One type fits all

RREEFFRRIGIGEERRAANT LNT LEEAAK DK DEETTEECCTTIOION, UN, UVV, G, GLLOO-K-KLLEENZNZCCLLEEAANENERR

606 606465

An easy to use cleaning agent to remove tracer fluid from the surface.

Features

• Removes UV tracer fluid

Benefits

• Easy to use

324


Tools

SSPPAARRE BE BUULLB 110B 110/220 V 100 W/220 V 100 W

606 596536

Spare bulb 100 W for 110/220 V UV tracer kit (587170)

Product code: UV1103



587170 U.V. TRACER KIT 220V/240V

596536 SPARE BULB 110/220V 100W

SSPPAARRE BE BUULLB 12V 100WB 12V 100W

606 596551

Bulb 100W for UV tracer kit 12V (711523)

Product code: UV2054



711523 U.V. TRACER KIT 12V

596551 SPARE BULB 12V 100W

325


Tools

HAHAND HEND HELLD RD REEFFRRIGIGEERRAANT LNT LEEAAK DK DEETTEECCTTOORRUUNIRNIRXX--1A1A

606 716142

A hand held detector able to detect all halogen

refrigerants (CFC, HCFC and HFC) enabling you

to find leaks in your refrigeration system. One of

the most sensitive refrigerant leak detectors in

the industry

Features

• Six-segment visual leak size indicator

• Audible alarm

• High and Low sensitivity level

• Cordless

• 5 ppm sensitivity

• Supplied in carrying case and spare sensing tips

• Batteries 2 pcs C-cell alkaline

Benefits

• Delivered in sturdy carry case

• Includes batteries and spare sensing tip

Technical data

Alt. name UNIRIX-1A

respons time Instantaneous

Reset time 1 second

Probe length 35.5 cm - 14"

Weight 560 g

For optimum performance, WSS recommends to replace the

sensing tip (kit with product number 548700) and batteries

on regular basis.

• Sensing tip life is approximately 20 hours

• Battery life is approximately 30 hours



716142 REFRIGERANT LEAK DETECTOR UNIRX-1A

548700 MAINTENANCE KIT LEAK DETECTOR-XP2

Approvals

• UL classified • CE approved

326


Tools

MAMAINTINTEENANANCNCE KE KIT LIT LEEAAK DK DEETTEECCTTOORR-X-XPP22

606 548700

XP-2 Maintenance Kit ('Orange tips') for

UNIRX-1A hand held leak detector, part no.

716142.

Kit contains 3 tips. Tips need to be changed

after 20 hours of usage as they get saturated

and stop detecting refrigerant leaks.





327


Tools

RREEFFRRIGIGEERRAATTIOION HAN HANDNDY TY TOOOOLLS CS CAASSEE

606 752154

The kit contains both specialised refrigeration

tools and general tools that are necessary for

day to day ship-board operation and

maintenance of refrigeration systems and their

control circuits. Some of the included products

can be reordered.

Features

• Quality tools selected for defined purposes

• Handy light weight suitcase

• Service and refrigerant slide rulers are included

• Vacuum and charging hoses suitable for every day

operations

• Refrigeration Fault Diagnostic Slide to assist in fault finding

• Unitor Refrigeration Handling Guide to give practical tips

• Unicool Refrigerant Slide giving technical data on most common marine refrigerants

Benefits

• Convenient

• Every tool needed is collected in one place together with a useful refrigerant handling guide and more

Supplied with

Specialised refrigeration tools:

• Tube cutter «Mini»

• Schrader Valve Core Removal Tool

• Solenoid Valve Operating Magnet

• Evaporator Fin Straightener (Comb)

• Hoses 0.9 & 1.8 m w/ball valve & sight glass, 1/4" SAE,

800 psi

• Hose with ball valve, 1/4" SAE, 800 psi

• UT-04 1/4" SAE male T-Piece

General Hand Tools:

• Screw drivers (-) & (+)

• Small screw drivers (-) & (+)

• Pliers: Long nose, split joint, combination & angle nose

• Adjustable wrench




544932 REFRIGERANT CYL. VALVE ADAPTOR SET

743476 MAGNET & VOLT STICKS PACK

737668 IR THERMOMETER W/BELT HOLSTER

528026 INNER-OUTER REAMER

522557 TUBE CUTTER UPT-274-FC

522573 FLARE TOOL

743203 RATCHET WRENCH BIG 1/2-1/4-5&9/16

743195 RATCHET WRENCH SMALL 1/4-3/8-3&5/16

328


Tools

TTUUBBE CE CUUTTTTEER UR UPPTT--22774-4-FFCC

606 522557

A basic tube cutter for cutting copper tubing.

Product code: UPT-274-FC

TTUUBBE BE BEENDNDEERR, T, TRRIPIPLLE HEE HEAADD

606 522565

The triple headed tube bender can be used for

bending tubes with an outside diameter of 1/4”,

5/16” and 3/8” up to an angle of 90°.

A very useful tool during fitting of pressure

switches or gauges, and mounting of split A/C

units to get smooth bends.

Features

• Services tubes up to diameters of 3/8"

• Bending angle max 90 degrees

Product code: UTB-368

329


Tools

FFLLAARRE TE TOOOOLL

606 522573

45° flaring tool for all tubes in metric and inch sizes, compact size for use in narrow spaces.

Features

• Flares tubes with O.D. from 5 to 16 mm or 3/16" to 5/8"

• Supplied in sturdy plastic case

Benefits

• practical also in narrow spaces

Product code: UPT-525-F

FFLLAARRING SING SEETT

606 597690

A 45° eccentric flaring tool in inch sizes made from forged high quality steel. The off-centre cone

produces a rolling motion for uniform flare walls.

Features

• Flare set supplied in sturdy plastic case

• Applicable for tubes with O.D. from 1/8” to 3/4"

Product code: UPT-375-FS

330


Tools

FFLLAARREE/S/SWWAAGGE SE SEET 3T 3//16" - 316" - 3//4"4"

606 597708

A 45° flaring and swaging tool in inch sizes

made from forged high quality steel

Features

• Tubes with maximum O.D. of 3/16" to 3/4"

• Flare & swage set supplied in sturdy plastic case

Product code: UPT-275-FS

INNEINNERR-O-OUUTTEER RR REEAAMEMERR

606 528026

A simple reamer for removal of burs both

internal and external.

Features

• Maximum 38 mm (1.5") OD

• Maximum 32 mm (1.25") ID

331


Tools

RRAATTCCHEHET WT WRREENCNCH SH SMAMALLL 1/L 1/4" - 34" - 3//8" - 3 & 58" - 3 & 5//16"16"

606 743195

A wrench nessesary when opening and closing

system or compressor valves during refrigerant

charging, system oil change etc.

Features

• Fits a variety of different valve spindles

• Plastic covered grip for comfort

• Square 3/16", 1/4", 5/16" and 3/8"

Benefits

• 4-in-1 wrench that is easy to carry around

RRAATTCCHEHET WT WRREENCNCH BH BIG 1/IG 1/2" - 1/2" - 1/4" - 5 & 94" - 5 & 9//16"16"

606 743203

A wrench nessesary when opening and closing

system or compressor valves during refrigerant

charging, system oil change etc.

Features

• Fits a variety of different valve spindles

• Plastic covered grip for comfort

• Hexagonal 1/2" and 9/16"

• Square 1/4" and 3/16"

Benefits

• 4-in-1 wrench that is easy to carry around

332


Tools

MAMAGGNENET & VT & VOOLLT ST STTICICKKS PS PAACCKK

606 743476

Simple and quick tool to test solenoid valve

activation and if there is power supplied to the

system components.

Features

• Pocket clip

• Test function

• CE approved

• Batteries and user information included

Benefits

• Easy and practical to use

CCHAHARRGGING HOING HOSSE SE SEET UT UCCH-H-772 3 X 1.2 3 X 1.8 M8 M

606 597757

Hose set used together with the refrigerant

service manifold

Features

• Yellow, red and blue hose

• High quality material


• Teflon seals

Benefits

• Flexible even in low teperatures without collapsing


Product code: UCH-72

333


Tools

DDEELLUUXXE SE SEERRVVICICE MAE MANIFNIFOOLLD SD SEET 2-T 2-WWAAYY, R, R--4410A10A

606 711499

A service manifold with high and low pressure

gauges and optical sight glass to observe the

refrigerant as it flows through the manifold,

assisting in assessing the operating

performance for a refrigeration systems and

assist during recovery or charging processes.

Also suitable for refrigerants with higher

operating pressures like R-410A.

Features

• 60 mm glycerine-filled gauges

• Gauge scale for refrigerants like R-410A (higher

pressure

• 3 hoses 1/4” (yellow, red , blue) with length of 150

cm; connection 5/16" SAE flare (1/2"-20 UNF) on

one side and on the other side 1/4" SAE flare

• 1 vacuum hose 3/8” (yellow) hose with length 90 cm

with 3/8" SAE flare connections on both sides

• Core depressor (Schrader) connections where

applicable

• Hoses classified with working pressure of 60 bar

• Non-rotating piston valves for durability

Benefits

• Liquid filled gauges gives accurate reading

• Easy to use with colour-coded valves and hoses

334


Tools

DDEELLUUXXE SE SEERRVVICICE MAE MANIFNIFOOLLD SD SEET 4-T 4-WWAAYY, V, VAARRIOIOUUSSRREEFFRRIGIGEERRAANTNTSS

606 711473

Deluxe service manifold is equipped with high

and low pressure gauges and an optical sight

glass to observe the refrigerant as it flows

through the manifold. This benefits the operator

by assisting in assessing the operating

performance for a refrigeration system and

assisting during recovery or charging

processes.

Features

• 80 mm glycerine-filled gauges

• Scale for refrigerants R22(R417), R134a,

R404A(R507), R407C

• 3 hoses 1/4” (yellow, red , blue) with length of 120 cm; connection 1/4" SAE flare

• 1 vacuum hose 3/8” (yellow) hose with length 90 cm with 3/8" SAE flare connections on both sides

• Core depressor (Schrader) connections where applicable

• Hoses classified with working pressure of 40 bar

• Non-rotating piston valves for durability

Benefits

• Liquid filled gauges gives accurate reading

• Easy to use with colour-coded valves and hoses

335


Tools

RREEFFRRIGIGEERRAANT RNT REECCOOVVEERRY PY PAACCKKAAGGEE, 115 V, 115 V

606 652511

The Refrigerant Recovery Package consists of

carefully selected quality equipment designed to

handle recovery from a vessel's refrigeration

systems in a controlled manner.

Electrical equipment is set for 115 V and 50/60

Hz.

The Unitor Marine Refrigerant Recovery

Package is supplied ready to operate with a

practical user manual.

Features

• Comprehensive package that supports a variety of

operations

• Maintenance friendly

• Lightweight and portable

• Recovers vapour and liquid refrigerants

• Suitable for all standard (CFC, HCFC and HFC) refrigerants

Benefits

• Helps the ship operator to re-use the refrigerants during system maintenance and service

• Reduces refrigerant consumption

• Cost saving

• Full range of accessories and spare parts

Technical data

Operating voltage 115V 50/60Hz

Power 380 W

Vacuum 100 mbar

Recovery rate Vapour 33 kg/h

recovery rate Liquid 80 kg/h

Recovery rate Push - Pull 380 kg/h

Connections 1/4" SAE flare Male

Length 483 mm

Width 229 mm

Height 343 mm

Weight 14 kg

336


The recovery package consists of:


613747 REFRIGERANT RECOVERY UNIT URU-5000B



636738 INLET FILTER DRIER 3PCS, 1/4" FLARE

596544 RECOVERY TANK 21.6LTR + DOCUMENTS

613927 DIGITAL WEIGHING PLATFORM ADS-100

711473 DELUXE MANIFOLD SET 4-WAY

587568 VACUUM PUMP 110/220V UVP-15401

597666 ELECTRONIC VACUUM GAUGE UVG-150


Accessories


734681 UNITOR RECOVERY EQUIPMENT BOX

613935 RECOVERY UNIT CONNECTION KIT


632588 RECOVERY CYL 56L + DOCS OUTRIGHT

Approvals

• Package complies with all US EPA and EC

regulations

• CE - TUV and ARI - UL

337


Tools

RREEFFRRIGIGEERRAANT RNT REECCOOVVEERRY PY PAACCKKAAGGEE, 230 V, 230 V

606 652522

The Refrigerant Recovery Package consists of

carefully selected quality equipment designed to

handle recovery from a vessel's refrigeration

systems in a controlled manner.

Electrical equipment is set for 230 V and 50/60

Hz.

The Unitor Marine Refrigerant Recovery

Package is supplied ready to operate with a

practical user manual.

Features

• Comprehensive package that supports a variety of

operations





Benefits



• Cost saving

• Full range of accessories and spare parts

Technical data

Operating voltage 230 V 50/60 Hz

Power 380 W

Vacuum 100 mbar


Recovery rate Liquid 80 kg/h


Connection Type 1/4'' SAE FLARE MALE

Length 483 mm

Width 229 mm

Height 343 mm

Weight 14 kg

338


Supplied with:


613748 REFRIGERANT RECOVERY UNIT URU-5000A




596544 RECOVERY TANK 21.6LTR + DOCUMENTS

613927 DIGITAL WEIGHING PLATFORM ADS-100

711473 DELUXE MANIFOLD SET 4-WAY

587568 VACUUM PUMP 110/220V UVP-15401

597666 ELECTRONIC VACUUM GAUGE UVG-150


Accessories


734681 UNITOR RECOVERY EQUIPMENT BOX



632588 RECOVERY CYL 56L + DOCS OUTRIGHT

Approvals

• Package complies with all US EPA and EC

regulations


339


Tools

RREEFFRRIGIGEERRAANT RNT REECCOOVVEERRY UY UNITNIT, U, URRUU--5000B5000B, 115 V, 115 V,,5050/60 HZ/60 HZ

606 613747

Refrigerant recovery machine designed to

handle recovery tasks of a vessels refrigeration

systems.

The Unitor marine refrigerant recovery unit is

supplied ready to operate with a practical user

manual.

Features

• Includes inlet filter and a short utility connection hose

• Instruction manual adapted to maritime usage





Benefits



• Cost saving

• Full range of accessories and spare parts available

Technical data

Operating voltage 115 V 50/60 Hz

Power 380 W

Vacuum 100 mbar





Length 483 mm

Width 229 mm

Height 343 mm

Weight 14 kg

340

Accessories


613885 COMPRESSOR REPAIR KIT

613893 PISTON SEAL REPAIR KIT

613901 VALVE REPAIR KIT

613919 SHAFT SEAL REPAIR KIT



Approvals


341


Tools

RREEFFRRIGIGEERRAANT RNT REECCOOVVEERRY UY UNITNIT, U, URRUU--5000A5000A, 230 V, 230 V,,5050/60 HZ/60 HZ

606 613748

Refrigerant recovery machine designed to

handle recovery tasks of a vessels refrigeration

systems.

The Unitor marine refrigerant recovery unit is

supplied ready to operate with a practical user

manual.

Features

• Includes inlet filter and a short utility connection hose

• Instruction manual adapted to maritime usage





Benefits



• Cost saving

• Full range of accessories and spare parts available

Technical data

Operating Voltage 230 V 50/60 Hz

Power 380 W

Vacuum 100 mbar





Length 483 mm

Width 229 mm

Height 343 mm

Weight 14 kg

342

Accessories


613885 COMPRESSOR REPAIR KIT

613893 PISTON SEAL REPAIR KIT

613901 VALVE REPAIR KIT

613919 SHAFT SEAL REPAIR KIT



Approvals


343


Tools

RREECCOOVVEERRY UY UNIT UNIT URRUU--5000A5000A/B/B, C, COOMPMPRREESSSSOORRRREEPPAAIR KIR KITIT

606 613885

Compressor repair kit for both URU-5000A and URU-5000B

RREECCOOVVEERRY UY UNIT UNIT URRUU--5000A5000A/B/B, P, PISISTTOON SN SEEAALLRREEPPAAIR KIR KITIT

606 613893

Piston seal repair kit for both URU-5000A and URU-5000B

RREECCOOVVEERRY UY UNIT UNIT URRUU--5000A5000A/B/B, V, VAALLVVE RE REEPPAAIR KIR KITIT

606 613901

Valve seal repair kit for both URU-5000A and URU-5000B

RREECCOOVVEERRY UY UNIT UNIT URRUU--5000A5000A/B/B, S, SHAHAFFT ST SEEAALLRREEPPAAIR KIR KITIT

606 613919

Shaft seal repair kit for both URU-5000A and URU-5000B

344


Tools

RREECCOOVVEERRY UY UNIT UNIT URRUU--5000A5000A/B/B, C, COONNENNECCTTIOION KN KITIT

606 613935

A connection kit suitable for both URU5000A

and URU5000B to speed up recovery by Push -

Pull method.

Features

• Complete kit

• Packed in sturdy case


Supplied with:

Hoses with 1/4" SAE flare connections

Ball valves (2 pcs)

Ball valve with optical sight for flow indication

T-piece

RREECCOOVVEERRY UY UNIT UNIT URRUU--5000A5000A/B/B, INL, INLEET FT FILILTTEERRDDRRIEIER 3PR 3PCCSS, 1/, 1/4" F4" FLLAARREE

606 636738

A set of 3 inlet filter driers with 1/4" SAE flare

connections

Features

• Inline filter dryer element

345


Tools

DDIGIGITITAAL WL WEEIGIGHING PHING PLLAATTFFOORRM AM ADDSS--100100

606 613927

The weighing platform is needed to log the

exact amount of refrigerant charged to a

system, the amount of refrigerant recovered and

to protect the recovery cylinder from overfilling

(80%) during refrigerant recovery process.

Features

• Capable of handling cylinders up to 100 kg weight

• Control unit connected to platform by means of a

spiral cord

• Digital display

• A "zero" function is included to measure added

refrigerant

• Supplied in a sturdy carrying case

• Includes batteries and instructions

Benefits

• Easy to use

• Accurate measurement

Technical data

Range 0-100 kg

Accuracy +/- 0.5% of reading or +/- 1 digit

Battery life 30 hours

Weight 2.8 kg

Dimensions 387 x 267 x 635 mm

346


Tools

OONBNBOOAARRD SD STTOORRAAGGE BE BOOX FX FOOR RR REEFFRRIGIGEERRAANTNTRREECCOOVVEERRY PY PAACCKKAAGGEE

607 734681

A sturdy 200 L box used for storing recovery equipment onboard a vessel; handy for safekeeping and

easy to locate during port state inspections.

Features

• Completely weather proof and extremely rugged

• Colour coded: grey box with yellow lid

Benefits

• Colour coded according to international recovery standards

CCHAHARRGGING HOING HOSSE - 1.E - 1.8 M, 1/8 M, 1/4" F4" FLLAARRE 9881268E 9881268CCLL--772-2-Y YY YEELLLLOOWW

606 320234

1/4" hose to connect between Unicool

refrigerant cylinder adaptor and refrigeration

system

Features

• High quality hose material


• One end fitted with a valve core depressor

• Teflon seals

Benefits

• Flexible even in low teperatures without colapsing


• Schrader valve depressor eases the charging operation

Product code: UCH-72-Y

347


Tools

FFILILTTEER DR DRRIEIERRS US UFFD 2 PD 2 PCCSS

Removing contaminants such as acids and

moisture in refrigeration systems can be done

by inline driers which should be replaced

annually. When a burnout in the semi-hermetic

or hermetic compressor has occured it should

be replaced immediately.

Features

• 2 driers per pack

• Ready to use


Product Number Product name Connection Length Diameter

636506 FILTER DRIER-UFD-032F 2PCS 1/4" SAE flare 110 mm 40 mm








636688 FILTER DRIER UFD-164F 1/2" FL. 2PC 1/2" SAE flare 180 mm 65 mm

348


Tools

AACCTTIVIVAATTEED AD ALLUUMINA BMINA BEEAADDSS

604 617688

Removing contaminants such as moisture in refrigeration system can be done by descicants. It

contains activated aluminia beads.

Features

• 5 kg bucket

SSILILICICA GA GEEL DL DEESSICICCCAANTNT

604 617696

Removing contaminants such as moisture in refrigeration system can be done by descicants. It

contains silica gel beads.

Features

• 5kg bucket

349

�� *�� !" "# �� ) %��& �'��*&��$�(��)�'*

�� *�� !" "# �� ) %��& �'��*&��$�(��)�'�

MARINE PRODUCTS

PUMPSPAINT SPRAYING




WELDING

Onboard maintenance engineers are faced with a huge variety of different base materials and repairs that often have to take place under challenging conditions. WSS’s range of highly efficient welding solutions represents a compact but complete solution to onboard processes for welding and related applications. This includes equipment, consumables and storage solutions for all relevant arc and gas welding and cutting processes, and also cold repair solutions where hot work applications cannot be used.

WSS’s range of products for welding is supported by the most comprehensive Handbook for Maritime welders, WSS approved Unitor brand welding training at a number of Maritime Training centres, specialist technicians, a global service network, 24/7 service support and an ongoing programme of enhancements and new product development.

MAMARRINE PINE PRROODDUUCCTTSS Gas Welding, Brazing & Cutting

Gas Cylinder Regulators and Flashback Arrestors

RREEGGUULLAATTOORRS 510S 510

Reduce cylinder pressure to suitable working

pressure and keep it constant.

Features

• Easy identification of gas types with colour-coded

adjustment knobs

• Immediate identification of gas pressures with easy

to read gauges marked both in psi and bar

• Full capacity for all types of gas welding and cutting

work

• Designed for use with Unitor gas cylinders

• Full conformance with EN ISO 2503

Unitor cylinder regulators for Acetylene and Oxygen are

designed for reliability and safety of use. The large adjustment knobs are red for acetylene and blue for oxygen for easy

identification of gas type. Both contents and working pressure gauges are clearly graded in psi and bar.

All regulators are delivered with spare washers, hose connection for 1/4" and 3/8", gas hoses and instructions for use.

Unitor regulators ensure a correct and stable working pressure with sufficient capacity for all types of gas welding and

cutting work.

Oxygen 0-16 bar (145 psi) max. 40 m3/h

Acetylene 0-2.5 bar (22 psi) max. 5m3/h



510000 REGULATOR 510 OX PRESSURE 0-16 BAR

510001 REGULATOR 510 AC PRESSURE 0-2.5 BAR

Accessories


550160 WASHER ALU 10 PCS FOR OX REGULATOR

550178 CONTENTS GAUGE OX/AR 0-400 BAR

550194 WORKING GAUGE OX 0-16 BAR

550152 WASHER NYL 10 PCS FOR AC REGULATOR

550186 CONTENTS GAUGE AC 0-40 BAR

550202 WORKING GAUGE AC 0-2.5 BAR

619379 MANOMETER/GAUGE GUARD +

352



FFLLAASSHBHBAACCK AK ARRRREESSTTOOR WR W--66S66S

Protect regulators and gas cylinder against

flashback and detonation

Features

• Pressure activated cut-off valve

• Temperature activated cut-off valve

• Flame arrestor

• Non-return valve

Benefits

• Stops the pressure front

• Prevents fire from being supported by gas

• Stops the flame front

• Stops gas back feeding into the system

Maritime authorities, such as the Norwegian Maritime

Directorate, require the installation of flashback arrestors for

acetylene and oxygen, as incorrect maintenance or use of

gas welding equipment may cause flashbacks of various

types. Normally these will stop in a well designed torch, and

are only noticed as a popping sound in the torch. However,

faulty handling, maintenance or gas pressure settings may

lead to a penetrating flashback. This means that the gas

flame passes back through the hose(s). In some cases it

may also pass the regulator and ultimately reach the

cylinder.

The flashback arrestors supplied by Unitor are designed for

use both with gas cylinders and gas outlet stations and

incorporate several safety functions:

• Non-return valve preventing reverse flow of gases,

thereby preventing a gas mixture from reaching

pipelines or cylinders

• Flame filter to quench the flame front of a flashback

or a burnback

• Temperature activated cut-off to prevent further gas

supply in case of fire (activated if the temperature

rises to approximately 100° C)

• Pressure activated cut-off to prevent further gas

supply after a flashback (activated by the pressure

shock in front of the flashback)

• Pressure relief valve to vent off excessive pressure in

case of flashback or wrongly set working pressure

• Indicator lever showing that the pressure activated

cut-off has been activated; the lever is also used for

resetting the flashback arrestor


Product number Product name Capacity (m3/h) Inlet pressure (bar)

183970 FLASHBACK ARRESTOR W-66S ACETYLENE 19 1,5

302976 FLASHBACK ARRESTOR W-66S OXYGEN 110 10

353



FFLLAASSHBHBAACCK AK ARRRREESSTTOOR SR S5555

Protects regulators and gas cylinder against

flashback and detonation

Features

• Pressure activated cut-off valve

• Temperature activated cut-off valve

• Flame arrestor

• Non-return valve

Benefits

• Stops the pressure front

• Prevents fire from being supported by gas

• Stops the flame front

• Stops gas from back feeding into the system

Maritime authorities, such as the Norwegian Maritime

Directorate, require the installation of flashback arrestors for

acetylene and oxygen, as incorrect maintenance or use of

gas welding equipment may cause flashbacks of various

types.

Normally these will stop in a well designed torch, and are

only noticed as a popping sound in the torch. However,

faulty handling, maintenance or gas pressure setting may

lead to a penetrating flashback. This means that the gas

flame passes back through the hose(s). In some cases it

may also pass the regulator and ultimately reach the

cylinder.

The flashback arrestors supplied by Unitor are designed for

use both with gas cylinders and gas outlet stations and

incorporate several safety functions:

• Non-return valve preventing reverse flow of gases,

thereby preventing a gas mixture from reaching

pipelines or cylinders

• Flame filter to quench the flame front of a flashback

or a burnback

• Temperature activated cut-off to prevent further gas

supply in case of fire (activated if the temperature

rises to approximately 100° C)

• Pressure activated cut-off to prevent further gas

supply after a flashback (activated by the pressure

shock in front of the flashback)

• Indicator ring showing that the pressure activated

cut-off has been activated; the ring is also used for

resetting the flashback arrestor


Product number Product name Capacity (m3/h) Inlet pressure (bar)

708537 FLASHBACK ARRESTOR S55 AC 8,5 1,5

708545 FLASHBACK ARRESTOR S55 OX 50 10

354


Gas Hoses and Couplings

GGAAS HOS HOSSEESS

Unitor's hoses for supplying welding gases are

made according to the European Norm EN 559.

Normal working pressure is up to 20 bar.

The hoses are colour-coded red for acetylene, blue for

oxygen and black for shielding gases.

UNITOR’s hoses for acetylene and oxygen are specially

made for use with welding and cutting equipment. The

hoses comply with the European Norm EN 559

specifications for welding hoses.



526434 Twin gas hoses blue/red 6mm (1/4") AC +OX/m 526434

624312 Twin gas hoses blue/red 9mm (3/8") AC+ OX/m

175554 Gas hose red 6mm (1/4") Acetylene/m

175562 Gas hose blue 6mm (1/4") Oxygen/m

175539 Gas hose red 9mm (3/8") Acetylene/m

175547 Gas hose blue 9mm (3/8") Oxygen/m

576157 Gas hose black 6mm (1/4") Argon/m

355

RREEEELL, S, SEELLF RF REETTRRAACCTTING WING WITITH 20M 6.H 20M 6.3 MM T3 MM TWWININHOHOSSE AE ACC/O/OXX

176 725260

For safety, tidiness and reduced wear and tear

of hoses

Features

• Less handling of hoses rigging up and rigging down

• Only required length of hose pulled out to do the job

Benefits

• Saves time

• Less wear and tear on hoses

• Avoid tripping accidents and improve safety

Weight 30 kg

Supplied with: 20 m 6.3 mm twin hose

The handling of hoses cluttering the workshop floor is

awkward and a waste of time. Self-retracting hose reels let

you pull out the required length of hose and store the rest

out of harms way. This saves time, makes the job easier and

contributes to increased efficiency. A workshop floor free

from hoses reduces tripping accidents, improves access for

carts and trolleys and allows for easier cleaning. The Unitor

self-retracting hose reel is made of robust steel construction,

easy to install, and has a well proven design that vouches for

safe and maintenance free usage. Single-layer retraction of

the hose and open design for safety and easy service.

RREEEEL WL WITITH CH CRRAANK FNK FOOR WR WEELLDDING CING CAABBLLE AE ANDNDGGAAS HOS HOSSEESS

195 175729

Drum for storing of gas hoses or welding

cables. The drum stores up to approximately

100 m of 1/4" twin hose and is fitted with

brackets for bulkhead mounting.

Features

• Orderly storing of gas hoses or welding cables-

crank for winding up hoses or cable after work

Benefits

• Better use of limited space and results in less wear

and tear

• Save time rigging down

356



HOHOSSE JE JOOINT FINT FOOR GR GAAS HOS HOSSEESS

The hose joints are screw-couplings supplied in sets. Each set consists of two hose sockets with nuts

for connection to the gas regulator and torch. Included is also a connection stub for using the set as a

hose joint. Nuts and connection stub for acetylene are lefthand threaded and marked with a groove.

Oxygen are right-hand threaded. The hose joints are made of high-grade brass.



175588 HOSE JOINT F/6MM (1/4 INCH) AC HOSE

175596 HOSE JOINT F/6MM (1/4 INCH) OX HOSE

175604 HOSE JOINT F/9MM (3/8 INCH) AC HOSE

175612 HOSE JOINT F/9MM( 3/8 INCH) OX HOSE

HOHOSSE CE CLLAAMPMP





768416 CLAMP.1 EAR 12,3-14,3MM 1/4"""" HOS

768432 CLAMP.1 EAR 15,6-17,8MM 3/8"""" HOS

768507 PINCER TOOL FOR EAR TYPE HOSECLAMPS

PPINCINCHEHER TR TOOOOL FL FOOR HOR HOSSE EE EAAR CR CLLAAMPMPSS

401 768507

Tool for ear clamps. Standard pincher tool

where radial access to clamp is not restricted.

357



QQUUICICK CK COOUUPPLLINGINGSS

The quick couplings are designed for use on the

cylinder regulators/flashback arrestors and on

the gas outlet station regulators/flashback

arrestors.

They ensure quick and gas-tight connection of the hoses

without the use of tools.

Accidental connection of wrong gas is prevented by the

different design of the male/female connections for acetylene

and oxygen.

In addition the connecting sleeves are colour-coded red and

blue.

When disconnected the female socket (side towards the

regulator) automatically shuts off the gas flow.

Accessories


320218 QUICK COUPL.1/4IN HOSE AC

320192 QUICK COUPL.1/4IN HOSE OX

320200 QUICK COUPL.3/8IN HOSE AC

320184 QUICK COUPL.3/8IN HOSE OX

358


Gas Welders Accessories

SSAAFFEETTY WY WEELLDDING GING GOOGGGGLLEESS, L, LIFIFT FT FRROONT FNT FOOR GR GAASSWWEELLDDINGING

176 175273

Lightweight goggles with soft and comfortable

surfaces against the face.

The ventilation slots are designed to prevent entry of sparks

and spatter, at the same time ensuring sufficient air

circulation to prevent dampness and fogging of the glasses.

The filter shade glass is mounted in a flip-up front frame.

A protection glass is placed in front of the filter shade glass

(shade 5) in order to protect against spatter.

A protection glass is fitted in the fixed frame for protection

when grinding and using the chipping hammer.

Accessories

Product number Product name Application Filter shade pcs/set

633305 SHADE 3 GLASS. 10 PCS Silver brazing 3 10

633313 SHADE 5 GLASS. 10 PCS General gas welding and cutting 5 10

633321 SHADE 6 GLASS. 10 PCS General gas welding and cutting 6 10

633354 SHADE 7 GLASS. 10 PCS Gas welding and cutting thick material 7 10

633297 PROTECTION GLASS. 10 PCS Protection glass Clear 10

GGLLAASSSSEES FS FOOR GR GAAS WS WEELLDDING GING GOOGGGGLLEESS

The Unitor gas welding glasses have a diameter of 50 mm and fit the goggles. They are available in

different grades of shade for various types of work. All glasses come in sets of 10 pcs.

359



SSAAFFEETTY SY SPPEECCTTAACCLLEES CS CLLEEAAR FR FOOR ER EYYEEPPRROOTTEECCTTIOIONN

176 632943

The safety spectacles have scratchproof

hardcoated polycarbonate lenses, side shields

and adjustable arms. Lenses are clear.

Comfortable protective spectacles with integrated side

guards. The lens is made of scratch-resistant anti-glare

material. The temple arm length and angle are adjustable.

For use during daily maintenance work in workshops and on

site for protection against flying objects. Also use when

handling chemicals.

SSAAFFEETTY SY SPPEECCTTAACCLLEES SS SHAHADDE 4 FE 4 FOOR BR BRRAAZZING AING ANDNDGGAAS WS WEELLDDINGING

176 632950

The safety spectacles have scratchproof

hardcoated polycarbonate lenses, side shields

and adjustable arms. Green lenses in shade 4.

Same modern lightweight design and features as the Clear

version. Fitted with shade 4 lens. For use when doing

brazing and light duty gas welding and cutting work. Not for

use when doing arc welding.

360



SSAAFFEETTY GY GRRINDINDING GING GOOGGGGLLEES WS WITITH AH ANTNTI MISI MISTTAACCEETTAATTE LE LEENSNS

176 653410

The grinding goggles protect against spatter,

dust and liquids.

Features

• The headband is adjustable and elastic for

comfortable use

• The lenses are clear, anti-mist acetate and the design

provides ample ventilation

Half mask goggle of clear soft synthetic none-mist material.

For grinding use only.

361



HEHEAAT RT REESSISISTTAANT MITNT MITTTEEN FN FOOR GR GAAS CS CYYLLINDINDEERRSS

176 233148

Special mitten with woven kevlar outer layer and

ample insulation against heat in the inner layers.

The mitten should always be kept by acetylene cylinders and

outlets to make it possible to close the valve in case of fire.

Also suitable for handling hot workpieces.

May be used on either right or left hand.

GGAASS/T/TIG SIG SOOFFTTSSKKIN WIN WEELLDDING GING GLLOOVVEESS, 6 P, 6 PAAIRIRSS

197 632794

Softskin gloves for protecting hands when doing

Gas and TIG welding

Features

• Softskin

• Made according to international norms

Benefits

• Provides fingertip feeling, ensures easy control of

torch

• Provides safety and long lasting quality

Thick welding gloves will hamper the control of the torch or

rod. Special softskin gloves are available for this purpose.

They will fully protect from sparks and the radiation from an

arc, but will give less protection than the thicker welding

gloves when touching hot metal.

362



GGAAS IGS IGNITNITOOR TR TRRIPIPLLEEX 2 PX 2 PCCS FS FOOR GR GAAS WS WEELLDDINGING

176 633198

The triplex gas ignitor is made with the simple

popular and most reliable design. Easy to use,

with large sparks that effectively ignite the gas

flame.

Three flints are mounted in the head: one connected for

operation, 2 more as spares by rotating the flint holder head.

2 pcs per package.

GGAAS IGS IGNITNITOOR TR TRRIPIPLLEEX SX SPPAARRE FE FLLINT SINT SEETT. 10 P. 10 PCCSS

176 633206

The spare flint set for use together with triplex

gas ignitor.

Features

• Can easily be mounted in the Triplex gas ignitor.


Supplied with: 10 pcs of the 3 flint triangles giving a total of 30 spare flints.

363



WWEELLDDEERRS CS CHAHALLKK, F, FLLAAT 5XT 5X13X13X121277. 144 P. 144 PCCSS/P/PAACCKK

196 632968

Welders chalk is used to mark out positions

when gas and plasma cutting on metals. The

chalk is flat and can easily be kept in pockets

and tool boxes.

TTEEMPMPEERRAATTUURRE INDE INDICICAATTOOR KR KITIT

196 633081

Temperature indicator kit 200/400/600/800°C.

Temperature sticks are a wax that melts at a

preset temperature. Simply select a stick with

the desired temperature and make a mark on

the surface to be heated. When the stick mark

goes from solid to liquid the temperature has

been reached.

GGAALLVVAANIZNIZING SING SPPRRAAYY. 6 P. 6 PCCSS

196 633156

Galvanizing spray 400 ml in a box, 6 pcs. Galvanizing spray for touching up pipes that have been

welded on.

364


Welding, Brazing & Cutting Torch

UUCCTT--500 C500 COOMBMBINAINATTIOION TN TOORRCCH MAH MASSTTEER KR KIT FIT FOORRGGAAS WS WEELLDDINGING/C/CUUTTTTINGING

170 500000

Handy kit consisting of all equipment needed to

perform the normally occurring heating, brazing,

welding and cutting applications onboard.

Features

• Heavy duty PVC case

• Orderly interior

• Equipment fits together without the use of adapters

or use of outside tools

• All items inside built according to international norms

Benefits

• Easy overview and access to content

• No need to waist time looking for external tools

• Long lasting quality and safe working environment

Dimension 435 x 380 x 125 mm

Weight 6.0 kg

The Unitor combination torch is ideal for:

Welding, Heating, Gouging, Flame cleaning, Soldering,

Cutting, Rivet burning, Flame straightening

The UCT-500 Master kit has been assembled to cover all

ordinary acetylene / oxygen welding, brazing and cutting

work that may occur on board. It includes a range of eight

welding attachments, covering all welding applications from

less than 0.5 mm sheet metal up to 14 mm plate thickness.

The larger attachments also function as monoflame heating

attachments.

A cutting attachment with four nozzles, covering cutting of

steel up to 100 mm are included, also a roller guide for

cutting edges from 90 to 45 angle of plate surface. The

circular motion bar with centre tap allows for cutting circular

holes up to 960 mm diameter.

In addition to spanner, cleaning needles and a spare parts kit

with all the most commonly needed spares, the UCT-500

Master kit contains an instruction booklet giving complete

information on use and maintenance of the equipment.

The kit is assembled in a strong polyethylene case where

each component clicks into its reserved compartment for

good protection.


Supplied with:

Torch components

• UCT-500 shank with non-return valves, hose sockets

and hose clamps

• Welding attachments: 40, 80, 230, 400, 650, 1000

and 1250 nl/h

• Cutting attachments 90° with spare nozzle screw and

nozzles for 3-10 mm, 10-25 mm, 25-50 mm and

50-100 mm steel thickness

• Roller guide for 0°-45° cutting angles, with spare

clamp sleeve and circular motion bar complete with

centre and sleeve for 84-960 mm diameters

Torch maintenance equipment

• Spanner 15-, 17-, 18-, 19-, 23- and 24 mm for

UCT-500

• Cleaning needle set for UCT-500 welding

attachments and cutting nozzles

• Spare valve and complete O-ring set for UTC-500,

including spare coupling nut for welding attachments

365



UUCCTT--500 C500 COOMBMBINAINATTIOION TN TOORRCCH CH COOMPMPAACCT KT KIT FIT FOORRGGAAS WS WEELLDDINGING/C/CUUTTTTINGING

170 500001

Handy kit consisting of most equipment needed

to perform the normally occurring heating,

brazing, welding and cutting applications

onboard.

Features

• Heavy duty PVC case

• Orderly interior

• Equipment fits together without the use of adapters

or use of outside tools

• All items inside built according to international norms

Benefits


• No need to waist time looking for external tools

• Long lasting quality and safe working environment

Dimension 375 x 300 x 105 mm

Weight 3.5 kg

The UCT compact kit contains the UCT-500 shank, the three

most commonly used welding attachments (80 I, 230 I and

650 I) and the cutting attachment with nozzles for cutting up

to 16 mm steel. Cleaning needles, spanner and full

instructions for use and maintenance are also included.

The compact kit is recommended as an additional welding

and cutting outfit on board. It is excellent for use with the

portable gas welding equipment, and it may also be

mounted on the trolley for A-5/0-5 cylinders thereby making

the trolley a complete portable gas welding and cutting

workshop.

The kit is assembled in a strong polyethylene case where

each component clicks into it’s reserved compartment for

good protection.


Supplied with:

Torch components

• UCT-500 shank with non-return valves, hose sockets

and hose clamps

• Welding attachments: 80, 230 and 650 nl/h

• Cutting attachments 90° with spare nozzle screw and

nozzles for 3-10 mm and 10-25 mm steel thickness

Torch maintenance equipment

• Spanner 15-, 17-, 18-, 19-, 23- and 24 mm for

UCT-500

• Cleaning needle set for UCT-500 welding

attachments and cutting nozzles

366



SSHAHANK WNK WITITH NOH NON-RN-REETTUURRN VN VAALLVVEES FS FOOR AR ACC/O/OXXCCOOMBMBINAINATTIOION TN TOORRCCHH

170 174656

Combination torch

Features

• Simple and safe to use

• Lightweight

Benefits

• Well balanced and easy to handle

All welding and cutting attachments will fit the shank. It is

equipped with non-return valves to prevent reverse flow in

the gas hoses. It balances well in the hand during welding

and cutting operations.

NONONRNREETTUURRN VN VAALLVVEE

For mounting on UCT-500 shank in order to prevent back flow of gas into hose.



597344 SHANK NONRETURN VALVE F/6MM OX HOSE

597336 SHANK NONRETURN VALVE F/6MM AC HOSE

651257 SHANK NONRETURN VALVE F/9MM OX HOSE

651265 SHANK NONRETURN VALVE F/9MM AC HOSE

619270 FLASHBACK ARRESTOR FR-20 FOR AC+OX

367



WWEELLDDING AING ATTTTAACCHMEHMENTNTSS

The size indicates consumption of oxygen in nl/

h. Acetylene consumption is approximately 10%

lower. Material thickness refers to mild steel.


Product number Product name Material thickness mm

174565 WELDING ATTACHMENT 40 L <0.5

174573 WELDING ATTACHMENT 80L. 0.5-1

174581 WELDING ATTACHMENT 230 L 2-3





183756 HEATING ATTACHMENT 5000 L. for heating

183780 FLEX.WELD.ATTACHMENT 160L 1-2



MUMULLTTIFIFLLAAME HEME HEAATTING AING ATTTTAACCHMEHMENTNT

The size indicates consumption of oxygen in nl/

h. Acetylene consumption is approximately 10%

lower.


Product number Product name Size

603415 MULTIFLAME HEATING ATTACHMENT 1000L 0-A 1000



368



CCUUTTTTING AING ATTTTAACCHMEHMENT WNT WITITH HEH HEAAD AD ANGNGLLE FE FOORRUUCCTT--500500

Cutting attchment are available with cutting

head in three different angles 75, 90 an 0

degrees. The 0 degrees cutting attachment is

used for gouging.

Features

• Adjustable towards shank

• Slim and simple design

• Made according to international norms

Benefits

• Able to reach difficult locations

• Less strain on opperator

• Provide safety and long lasting quality



174664 CUTTING ATTACHMENT 75 DGR



Accessories


174698 CUTTING NOZZLE 3- 10MM



174722 CUTTING NOZZLE 50-100MM

174730 GOUGING NOZZLE

369



CCUUTTTTING NOING NOZZZZLLEE


Product number Product name Nozzle number Consuption OX nl/h Consumption AC nl/h

174698 CUTTING NOZZLE 3- 10MM No.2 1300 460



174722 CUTTING NOZZLE 50-100MM No.5 7800 810

183863 CUTTING NOZZLE 153MM LENGTH 25-40MM - 6000 450

183855 CUTTING NOZZLE 140MM LENGTH 40-75MM - 7000 800

GGOOUUGGING NOING NOZZZZLLEE

170 174730

Furrow width 8-11 mm

Furrow depth 6-11 mm

Gas consumption OX:11500nl/h

AC:1750nl/h

370



GGUUIDIDE SE STTAANDNDAARRDD



174672 ROLLER GUIDE STANDARD

174680 CIRCULAR MOTION BAR

SSPPAARRE PE PAARRT KT KIT CIT COOMPMPLLEETTEE

170 500100

Convenient kit with all spare parts for shank and

attachments.



174789 VALVE ASSEMBLY BLUE FOR OXYGEN

613762 VALVE ASSEMBLY RED FOR ACETYLENE

535005 O-RINGS SET OF 4 F/WELD./CUTT. ATT.

174771 COUPLING NUT FOR SHANK ATTACHMENTS

174813 COUPLING SCREW FOR CUTTING NOZZLES

371



SSPPAANNENNER FR FOOR TR TOORRCCHH

170 174649

Spanner 15-, 17-, 18-, 19-, 23- and 24 mm for UCT-500.

Handy spanner for thightening up all connections on shank

and attachments.

CCLLEEAANING NENING NEEEDDLLEES SS SEET FT FOOR TR TOORRCCHH

176 175356

Cleaning needles for welding attachments and

cutting nozzles

372


Transportable Gas Welding Equipment

TTRROOLLLLEEY AY A4040/O/O40 G40 GAAS WS WEELLDD..

176 176016

Trolley for two cylinders securing cylinders

during work and transportation.

Features

• Sturdy lightweight construction fitted with large

rubber wheel

• Cylinders firmly locked in place and secured

• Tested and certified for lifting

Benefits

• Can fast and easy be brought to work locations

• Prevents accidents caused by cylinders falling over

• Can safely be lifted

This trolley is specially designed for on board use. The sturdy

but lightweight construction of steel pipes is fully galvanized

for corrosion protection. The trolley takes both 40 I and 50 I

size cylinders, which are firmly secured in the trolley by

means of two clamps with wing screws. As the weight of

two full gas cylinders is approximately 150 kilos, the trolley

has been fitted with extra large rubber wheels for easy

mobility. For transport by crane the trolley is fitted with a

lifting bow. As safety in transportation and lifting of gas

cylinders is a paramount demand, the trolleys are tested and

certified according to the International Labour Office for the

test and examination of lifting gear used in the loading and

unloading of ships. The trolleys are test loaded to 400 kg,

and certified for safe working load (S.W.L.) 200 kg.

Being intended to function as a complete mobile gas

welding workshop, the trolley is fitted with a large, lockable

accessories box. Weight of the trolley itself is 28 kilos.

Accessories

For a complete, portable welding workshop the following

items should be ordered (in addition to 40 litre gas cylinders

and the consumables required):


526509 STANDARD GAS ACCESSORIES

500000 UCT-500 COMBINATION TORCH MASTER

373



TTRROOLLLLEEY 1 SY 1 SUU--1010

176 176008

Trolley for one cylinder securing cylinder during

work and transportation.

Features

• Sturdy lightweight construction fitted with rubber

wheel

• Cylinder firmly locked in place and secured


Benefits

• Fast and easy transportation



The use of special lifting / transport devices for gas cylinders

is required by several marine authorities.

Unitor's cylinder trolley SU-10 is specially designed for on

board use when lifting or transporting

40 l and 50 l cylinders.

The cylinder is easily positioned in the trolley and locked in

place with three wing screws.

The strong lightweight steel construction is fully corrosion

protected by galvanizing. Large rubber wheels ensure easy

transport along deck, and should it be necessary to lift up

and carry the trolley with cylinder attached, there is ample

holding space for 2 to 4 persons.

The trolley is tested and certified according to the

International Labour Office for the testing and examination of

lifting gear used in the loading and unloading of ships.

Test load 200 kg. Safe Working Load (S.W.L.) 100 kg.

Note: Unitor has also developed a trolley for two 40/50 l

cylinders for use on board as a mobile equipment or for

transportation of cylinders.

374



TTRROOLLLLEEY AY A--55/O/O--5 G5 GAASSWWEELLD FD FOOR PR POORRTTAABBLLEEEEQQUUIPIPMEMENTNT

176 534982

Trolley for two cylinders securing cylinders

during work and transportation.

Features

• Sturdy lightweight construction fitted with rubber

wheel



Benefits




It is specially designed by Unitor for on board use, and has a

low center of gravity which will keep it standing upright even

at 30° out of vertical with all equipment mounted.

The strong lightweight steel construction is hot zinc coated

for high corrosion resistance. It is fitted with solid rubber

wheels for easy transport. Handles at top and bottom

ensure easy carrying and lifting. Two double brackets for

Unitor rod containers give the possibility to include a

selection of four different rod types when transporting.

The trolley is tested and certified according to the

International Labour Office for the testing and examination of

lifting gear used in the loading and unloading of ships.

Test load 100 kg. Safe Working Load (S.W.L.) 50 kg.

Accessories

For a complete, portable welding workshop the following

items should be ordered (in addition to 5 litre gas cylinders

and the consumables required):



500001 UCT-500 COMBINATION TORCH COMPACT

375



BBAACCK PK POORRTTAABBLLE RE RAACCK FK F//AA5- +05-5- +05-CCYYLL..

176 176040

Back-frame for transportation of 5 litre cylinders.

Features

• Sturdy lightweight construction


Benefits

• Can be brought to work locations quickly and easily


Accessories

For a complete, portable unit the following items should be

ordered (in addition to 5 litre gas cylinders and the

consumables required):




376



PPOORRTTAABBLLE RE RAACCK FK FOOR AR A5+05 C5+05 CYYLLINDINDEERR

176 176032

For transportation and safe storing of cylinders

Features

• Sturdy lightweight construction


Benefits

• Can be brought to work locations quickly and easily


Accessories

For a complete, portable unit the following items should be

ordered (in addition to 5 litre gas cylinders and the

consumables required):




377



SSTTAANDNDAARRD GD GAAS AS ACCCCEESSSSOORRIEIES FS FOOR MOR MOBBILILEEEEQQUUIPIPMEMENTNT

176 526509

A complete kit comprising all necessary

equipment to use with acetylene and oxygen

cylinders.

Features

• Equipment fits together without the use of adaptors

• All items in accordance with international regulations

Benefits

• No need to order additional parts- one order number

• Long lasting quality and a safe working environment

Supplied with:

• Acetylene and oxygen cylinder regulators

• Flashback arrestors

• 10 m twin hose 1/4" with clips

• Gas ignitor

• Welding goggles

• Gas welding gloves

• Heat resistant mitten

• Unitor handbook for maritime welders

378



PPOORRTTAABBLLE WE WEELLDDING TING TAABBLLEE

176 176024

Table for welding and cutting work onboard.

Features

• Legs can be detached and fastened under table

• Adjustable legs length

• Sturdy design made of steel fully galvanised

• Holding clamp

Benefits

• Easily transported and stored

• Stable work surface

• Long lasting high quality

• Able to weld on small work pieces

Technical data

Width 600mm

Depth 400mm

Height 630mm (folded: 80mm)

Weight 14kg

This sturdy worktable is made of steel and fully galvanized

for corrosion protection. It includes a holding clamp for small

workpieces. To ensure a stable work surface all four legs are

adjustable in length. The legs have pointed ends to ensure

high friction and a good hull contact when used for arc

welding.

The table is excellent for use as a welding table in

workshops on board, and in cases when it is needed

outside the workshop it is easily transported as the legs may

be detached and fastened under the table surface.

379


Gas Welding Cabinet

GGAASSWWEELLDDING CING CAABBINEINET ET EMPMPTTYY

094 589846

Empty storage cabinet for gas welding rods,

brazing rods, fluxes and gas welding

equipment.

Features

• Compact design

• Sturdy and corrosion resistant

• Large storing capacity

Benefits


• Long lasting with no maintenance

• Opportunity to customise content to vessel

requirements

Technical data

Length 600 mm

Height 600 mm

Depth 300mm

Weight 37,5 kg

New compact design with improved access to contents,

and ample room for additional spares and accessories.

Sturdy, corrosion resistant construction from electro-

galvanized steel plates, with final coating by powder

spraying and baking. Shelves are zinc/yellow-chromate

passivated for optimal corrosion and scratch resistance, with

hardplast protection surface for nozzles and blowpipes. The

door construction provides a stable work surface for torch

assembly when open, and allows for mounting the cabinet in

corners or narrow openings.

380

GGAASSWWEELLDDING CING CAABBINEINET CT COOMPMPLLEETTE WE WITITH TH TOORRCCH,H,RROODDS & FS & FLLUUXXEESS

094 589861

Complete storage cabinet for all gas welding,

brazing and cutting operations onboard

Features

• Compact design


• Broad range of gas welding and cutting equipment,

gas welding rods, brazing rods and fluxes

Benefits



Technical data

Length 600 mm

Height 600 mm

Depth 300 mm

Weight 56 kg

New compact design with improved access to contents,

and ample room for additional spares and accessories.

Sturdy, corrosion resistant construction from electro-

galvanized steel plates, with final coating by powder

spraying and baking. Shelves are zinc/yellow-chromate

passivated for optimal corrosion and scratch resistance, with

hardplast protection surface for nozzles and blowpipes. The

door construction provides a stable work surface for torch

assembly when open, and allows for mounting the cabinet in

corners or narrow openings.


Supplied with:

• Torch maintenance equipment: Spanner 15-, 17-,

18-, 19-, 23- and 24 mm for UCT-500 Cleaning

needle set for UCT-500 welding attachments and

cutting nozzles Spare valve and complete O-ring set

for UTC-500, including spare coupling nut for welding

attachments

• Welder´s accessories: Gas goggles with lift front.

Softskin welding gloves for gas and TIG welding. Gas

ignitor triplex. Double row steel wire brush.

• Silver brazing: AG-60 2,0 mm 0,5 kg. AG-45 2,0 mm

0,4 kg. One box each AG-60/45 flux for general use

and Albroflux for use with AG-60 on Yorcalbro

• Bronze brazing: FC Bronze 2,0 mm 1,0 kg, 3,0 mm

1,0 kg. Bronze 3,0 mm 4,0 kg FC-Wearbro 3,0 mm

1,0 kg, 5,0 mm 1,0 kg. One box each of Bronzeflux

and Wearbroflux

• Cast iron joining and rebuilding: FC-Cast Iron, flux

coated brazing rod, 4,0 mm 1,0 kg

• Aluminium joining:

Alumag 3,0mm/0,5kg and one box Aluflux

• Tin soldering: Tin-240 soft solder on spool 1,6mm/

0,5kg

• Mild steel/heat resistant steels: MS 2,0 mm 3,5 kg,

MS 3,0 mm 3,5 kg and Icromo 2,5 mm 2 kg

• Instructions and information: Unitor handbook for

maritime welders

381


Gas Welding and Brazing Consumables

GGAAS WS WEELLDDING AING AND BND BRRAAZZING CING COONSNSUUMAMABBLLEESS

Unitor rods for gas welding and brazing are

supplied in sealed plastic containers. All rods

are supplied in 500mm length for convenient

use. The label on each container fully identifies

the contents, and also gives rod data and basic

information on application areas and use.


Product

number

Product

name Description

539551 MS-200 2.0 X

500M 3,5KG

Gas welding rod for welding of unalloyed structural steel with a carbon content of less than 0.2%

539569 MS-200 3.0 X

500MM 3,5KG

Gas welding rod for welding of unalloyed structural steel with a carbon content of less than 0.2%

514265 ALUMAG 235 3.0

X 500MM 0,5KG

Gas welding rod for wrought and cast aluminium alloys containing up to 5 % Mg. Generally it can be used for all cast

alloys containing magnesium as the main alloying element.

233601 AG 60 252 2.0 X

500 MM

A flux coated cadmium free, seawater resistant, high strength silver rod for joining all types of steel, stainless steel,

copper, copper alloys, nickel, nickel alloys, cast iron, Yorcalbro pipes (aluminiumbrass), cunifer pipes type 90/10 and 70/

30.

519744 AG 45 253 2.0 X

500MM 0,4KG

Bare cadmium free silver rod for joining of all types of steel, stainless steel, copper, copper alloys, nickel and nickel

alloys, cast iron and hard match. This brazing rod gives a very good joint and can be used for brazing nipples, sleeves

and unions to copper pipes.

233551 FC-BRONZE 261

2.0 X500MM

1,0KG

A flux-coated brazing rod for joining and surfacing copper, brass, bronze, aluminium bronze, cast iron and steel. May be

used for brazing galvanized steel without destroying the galvanized surface.

233569 FC-BRONZE

2613.0 X 500MM

1,0KG

A flux-coated brazing rod for joining and surfacing copper, brass, bronze, aluminium bronze, cast iron and steel. May be

used for brazing galvanized steel without destroying the galvanized surface.

174326 BRONZE-264 3.0

X 500MM 1,7KG

An easy-flowing, universal brazing bronze (brass) rod for the brazing of steel, cast iron, copper and copper alloys, nickel

and nickel alloys. It gives a very smooth and attractive surface. The addition of Si, Mn and Sn guarantees a strong and

high-quality deposit.

514240 BRONZE-264 5.0

X 500MM 1,0KG

An easy-flowing, universal brazing bronze (brass) rod for the brazing of steel, cast iron, copper and copper alloys, nickel

and nickel alloys. It gives a very smooth and attractive surface. The addition of Si, Mn and Sn guarantees a strong and

high-quality deposit.

233577 FC-WEARBRO 262

3.0 X500MM

1,0KG

A flux-coated wear-resistant bronze rod used for applying a hard-wearing surface to bronze, brass, copper, steel, cast

iron and malleable cast iron. Also used for braze welding cast iron.

382

Product

number

Product

name Description

233585 FC-WEARBRO 262

5.0 X500MM

1,1KG

A flux-coated wear-resistant bronze rod used for applying a hard-wearing surface to bronze, brass, copper, steel, cast

iron and malleable cast iron. Also used for braze welding cast iron.

682310 FC-CAST IRON

268S 4.0X450MM

0,7KG

Flux coated rod for joining and surfacing cast iron and brazing cast iron to steel. Oil impregnated cast iron may also be

brazed with FC-Castiron 268.

603043 ALUFLUX 234 F.

250 G

Flux for gas welding rod Alumag-235 on aluminium

603050 AG-60/45 FLUX

252 PF.250G

Flux for silver brazing rods AG-60-252 and AG-45-253

603076 BRONZE-FLUX

261 PF. 250G

Flux for brazing rod Bronze-264 and FC-Bronze-261

603068 WEARBRO-FLUX

262 PF. 250G

Flux for brazing rod FC-Wearbro-262

604371 ALBRO-FLUX 263

PF 250G

Flux for silver brazing rod AG-60-252 on Yorcalbro

777937 TIN 241 AG 1.5

MM O.5 KG

SOLDER

Flux cored lead free silver alloyed soft solder wire on spool for tinning and joining of electric conductors, electrical

connections, electrical instruments, radios, batteries, refrigeration plants, etc.

383

MAMARRINE PINE PRROODDUUCCTTSS Arc Welding Equipment

Arc welding/cutting machines

UUWWI-I-150 A150 AUUTTOOLLINE WINE WEELLDDING INVING INVEERRTTEERR

191 709659

A portable welding machine for stick electrode

and TIG welding.

Benefits

• Portable

• Safe in use

• Efficient

• Minimal corrosion damage, minimal internal

contamination - long product lifespan

Technical data

Welding current range MMA 20-150 A

Welding current range TIG 5-150 A

Open circuit voltage (OCV) 69 V

Max touchable OCV voltage 16 V

Duty cycle at max current 30%

Electric phase 1 phase

Power supply voltage 115-230


Recommended fuses (Slow) 32/16 A

Certifying authority/institution S, CE

IP protection 23 S

Weight 6,2

Length 340 mm

Width 140 mm

Height 230 mm

Features

• Connects to any primary voltage between 115 and

230 V with AutoLine technology which requires no

action from the operator

• Line Voltage compensation keeps output of the

power source constant regardless of fluctuation in

input power from 10% below lowest to above highest

rated input voltage

• A built-in circuit that reduces the open-circuit voltage

to below 16 V when the welding power source is not

in use

• Automatic hot start for stick arc starts makes arc

striking easy and prevents electrode sticking

• Lift-Arc start in TIG mode provides easy and soft TIG

arc starting- an optional TIG remote control will in

addition provide current adjustment and downslope

on the torch

• Stepless adjustment of welding current through

whole current range: 20-150 A for stick welding,

5-150 for TIG welding

• Casing of high grade aluminium and industrial plastic

to eliminate corrosion damage

• Fan on demand to reduce internal contamination

• Wind tunnel design for the internal cooling air flow

protects electrical components and PC boards from

dirt, dust, debris, greatly improving reliability

• Thermal overload protection with indicator lights

helps prevent machine damage if the duty cycle is

exceeded or airflow is blocked

384


Supplied with:

UWI-150 AutoLine welding machine

1 pc carrying strap

2m primary cable, mounted on the welding machine

3m welding cable with dix 25 quick connector and electrode holder

3m return cable with dix 25 quick connector and return clamp

Instruction manual

Accessories


Welder's accessories:

767000 AUTOVISION PLUS FRESHAIR WELDSHIELD

767001 AUTOVISION PLUS WELDING SHIELD

709485 FLIPVISION WELDING FACE SHIELD

619098 FACE SHIELD W/HANDLE

633248 SHADE 9 GLASS. 5SET



632786 WELDERS GLOVES. 6 PAIRS

632976 WIRE BRUSH STEEL. 6PCS

632984 WIRE BRUSH STAINL. 6PCS

633008 CHIPPING HAMMER ST. 2PCS

632992 CHIPPING HAMMER STAINLESS

516161 WELDING GAUGE TYPE J

TIG welding accessories:

719575 REMOTE CONTROL FOR UWI-150 AUTOLINE

150000 TIG TORCH T-150 W.DIX 25 CONNECTOR

607810 ACCESSORIES KIT TIG TORCH

510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN


597328 FLOWCONTROL METER, ARGON

597310 FLOWCONTROL VALVE, ARGON

632794 TIG GLOVES. 6 PAIRS

576157 GAS HOSE 1/4" 6.3MM BLACK



385



UUWWWW--16161 MP MU1 MP MULLTTI PI PRROOCCEESSS WS WEELLDDING INVING INVEERRTTEERR

193 161161

A welding machine for electrode, TIG and MIG/

MAG welding of most metals on board.

Benefits

• Portable and efficient, safe in use

Technical data

Welding current range MIG/MAG 5-160 A

Wire speed range MIG/MAG 2-13 m/min

Voltage adjustment range MIG/MAG 10-26 V

Welding current range TIG 5-140 A

Welding current range MMA 5-140 A




Power supply voltage 230


Recommended fuses (slow) 16 A

Certifying authority/institution S, CE


IP protection 23 S

Weight 12,6

Length 460 mm

Width 230 mm

Height 325 mm

Features

• Fully portable, only 12 kg net weight. 1 phase 230 V

16A for use anywhere on board

• Safe in use- voltage reduction function reduces

touchable open circuit voltage to 10 V

• Individual stepless adjustment of both wire speed and

welding voltage through whole adjustment range

provides optimal settings for any wire

• Select between softer or crisper arc on the front

panel to optimize the wire welding arc

• 2-step or 4-step trigger function for wire welding

operator comfort

• 2-step TIG-torch control with lift-arc start and

adjustable gas post-flow

• Polarity selection allows for wire welding with all wires

including self-shielding wires without shielding gas,

and even for TIG welding with + polarity

• Automatic hot start and arc force control provides

easy start and a stable arc in MMA modus

• Protection against both overload and high input

voltage, with indicator light on the front panel,

prevents machine damage from wrong primary

voltage and overheating

UWW 161MP is supplied complete for stick electrode

welding and wire welding with gasless wire.


Supplied with:

2,5 m primary cable with plug, fitted on the welding machine.

Gas hose socket with nut and hose clamp for connection to the gas inlet of the machine

Wire welding torch with 3m cable and Euro connector complete for 0,8 mm wire

Electrode holder for MMA (stick) electrode welding with 2.5m cable and Dix 25 connector

3 m return cable with Dix 25 connector and return clamp

Adjustable carrying strap

Instruction manual

386

Accessories


Welder's accessories:













Gas supply accessories:








Wire welding accessories:

161163 MIG/MAG TORCH M-161 W/3M CABLE

590075 NONIRON LINER 1,2MM FOR UWW-160

613746 STEEL LINER F.UP TO 1.2MM F.UWW-160

160004 DRIVEROLL U-GROOVE FOR UWW 161

160005 DRIVEROLL KNURLED V-GR.FOR UWW 161

160003 DRIVEROLL V-GROOVE FOR UWW 161

161164 OUTOING WIRE GUIDE TUBE F. UWW-161

633149 ANTI SPATTER SPRAY. 6PCS

591990 MULTI-PURPOSE PLIER FOR WIRE TORCH

160001 GAS NOZZLE FOR UWW-160

712018 10 TIPS 1,0-1.2MM FOR UWW-160 TORCH

711994 10 TIPS 0.8MM FOR UWW-160 TORCH

711200 UNITOR BACKVAC



160010 TIG TORCH T-161 WITH EUROCONNECTOR



387



UUWWI-I-20203 S3 STTICICK / TK / TIGIG

191 203203

A portable welding machine for stick electrode

and TIG welding.

Benefits

• Portable

• Safe in use

• Efficient

Technical data

Welding current range MMA 5-200 A DC


Duty cycle at max current 30 %


Power supply voltage 380/440



Certifying authority/institution S,CE

IP protection 23 S

Weight 12.2 kg

Length 460 mm

Width 230 mm

Height 325 mm

Features

• Connects to any primary voltage between 380 and

440 V without need for any action from the operator

• Line voltage compensation keeps output of the

power source constant regardless of fluctuation in

input power from 10% below lowest to above highest

rated input voltage

• Safe in use with open circuit voltage below the 70 V

limit set by the code of safe working practices for

merchant seamen

• Automatic hot start for stick arc starts makes arc

striking easy and prevents electrode sticking

• Adjustable arc force for stick electrode welding allows

the arc characteristics to be changed for specific

applications and electrodes: low arc force setting for

smooth running electrodes like LH and Special and

increased setting provides optimal characteristics for

stiffer, more penetrating electrodes like E6010 types,

chamfering electrodes like CH2 and electrodes for

ACA gouging

• Lift-start in TIG mode provides easy and soft TIG arc

starting

• Stepless adjustment of welding current through

whole current range: 5 –200A

• Casing of high grade aluminium and industrial plastic

to eliminate corrosion damage also contributes to low

weight which together with compact outer

dimensions provides good portability

• Wind tunnel design for the internal cooling air flow

protects electrical components and PC boards from

dirt, dust, and debris, greatly improving reliability

• Thermal overload protection with indicator lights

helps prevent machine damage if the duty cycle is

exceeded or airflow is blocked

388


Supplied with:

1 pc carrying strap

4m primary cable, mounted on the welding machine

3m welding cable with quick connector and electrode holder

3m return cable with quick connector and return clamp

Instruction manual

Accessories


Stick welding accessories:























389



UUWWRR--30303 W3 WEELLDDING RING REECCTTIFIFIEIERR

191 670430

A welding machine for stick electrode and TIG

welding.

Features

• Dual process: stick electrode and TIG welding

characteristics with lift-arc start

• Safe in use, open circuit voltage only 5 V

• Remote control option provides ability to adjust

amperage during welding

• Adjustable arc force control

• Automatic anti-stick function

• Overload protection with indicator light

• Strong lifting gear and solid rubber wheels

Technical data

Welding current range 5-300 A

Open circuit voltage 5 V


Electric phase 3

Power supply voltage 230/380/440 V


Recommended fuses (slow) 35/20/16 A

Certifying authority/institution S,CE

IP protection IP 23

Weight 95 kg

Length 680 mm

Width 450 mm

Height 450 mm

Conventional welding rectifier designed for maximum

durability under the rough conditions that it may be exposed

to when used on board for heavy steel repairs on deck, in

tanks and in cargo holds.

The three-phase transformer is thoroughly impregnated with

a special varnish for full corrosion protection. The silicon

rectifier bridge is fitted with screw-in diodes and thyristors,

and all electronics are completely enclosed and protected

outside the cooling air flow.

The electronic control circuits are designed to compensate

for main voltage fluctuations and voltage drop in long

welding cables to ensure a constant and stable welding arc.

Continuous adjustment of welding current and arc force

provides optimal welding properties with all coated rutile,

basic or cellulose electrodes, and also electrodes for non-

iron alloys and chamfering.

Lift-Arc function without high-frequency for TIG welding

ensures easy arc start, free from electromagnetic

interference.

Remote control option provides ability to adjust amperage

during welding.


Supplied with:

3 m primary cable

Lifting gear with cable winding frame

Under carriage with two large wheels and support

390

Accessories

























391

AACCCCEESSSSOORRIEIES FS FOOR UR UWWRR--303033

191 676908

Accessories kit for making the UWR-303

welding machine fully operational



Supplied with:

594317 RETURN CLAMP ASSY 400A W/DIX 70

594325 EL.HOLDER 400A WITH DIX70 CONNECTOR

676916 REMOTE CONTROL FOR UWR-303

676924 REMOTE CONTROL CABLE 10M F/ UWR-303


Welding gloves

Chipping hammer steel

Wire brush steel two rows

Accessories


645408 EXTENSION CABLE 25M 4 PIN

392



UUWWI-I-400 W400 WEELLDDING INVING INVEERRTTEERR

191 670398

A welding machine for electrode, TIG and MIG/

MAG welding.

Benefits

• Multi-functional

• Safe in use

• Efficient

Technical data

Welding current range 5-400



Electric phase 3

Power supply voltage 380-440 V



Certification (approval) CE

IP protection 23

Weight 34.5 kg

Length 492 mm

Width 320 mm

Height 400 mm

Features

• Can be connected to any 3 phase primary voltage

between 380 V and 440 V, frequency 50-60 Hz

• Automatic shut down function against input voltage,

fluctuations outside ± 10% of rated voltage range

• Display information to operator on display stating

reason for shut down

• Stepless current control from 5-400 A

• Hot start, arc force control and anti-stick functions

• Parallel connection for extra power (2xUWI-400)

• Fan on “demand” tunnel cooling

• Remote on/off and remote amperage control

• Conforms to code of safe working practices for

merchant seamen

Designed for marine applications

A process selector switch provides quick and easy selection

of optimal welding characteristics for all processes required

for on board maintenance; electrode, TIG (with Lift Arc), wire

welding and air carbon arc gouging.

5-400A current range covers the use of any size of welding

electrodes.

Low weight and compact dimensions provide easy transport

to wherever welding is needed.

NB! Remote control product number 670414 must be used

when using UWI 400 for TIG welding.


Supplied with:

3 m primary cable

Instruction manual

393

Accessories


Accessories kit:

670406 ACCESSORIES FOR UWI-400














Remote control cable extension

670422 EXTENSION CABLE A 25 M











Wire welding accessories (Gas supply accessories as for TIG is required):

657106 UWF-SC12RC WIRE FEEDER

607451 WIRE TORCH T-400 MP W/3M CABLE

394

AACCCCEESSSSOORRIEIES FS FOOR UR UWWI-I-400400

191 670406

For making UWI-400 welding machine fully

opperational.



670406 ACCESSORIES FOR UWI-400

Supplied with:



670414 REMOTE CONTROL FOR UWI-400


Welding gloves

Chipping hammer steel

Wire brush steel two rows

NB!

Remote control product number 670414 must be used

when using UWI 400 for TIG welding.

Accessories



395



UUWWFF-S-SC 12 RC 12 RC WC WIRIRE FE FEEEEDDEERR

193 657106

SC 12 RC wire feeder for UWI 400 welding

machine

Features

• Spool sizes 200 mm to 300 mm can be used

• With an optional spool adaptor wire coils which are

delivered without spools can be used

• Spools are completely protected inside the case

• Takes wire sizes from 0.6 mm to 2 mm including flux-

cored wires and gasless wires

• Delivered with euro-connector for torch and 3 m

connection cables and gas hose for connection to

UWI-400MP

• Drive roll kit for 0,8 mm wires are included with the

feeder

Benefits

• Compact and lightweight for easy access to narrow spaces on board

Power supply from UWI-400 24 V AC 3,5A

Welding current rating 500A 100% duty cycle

Wire speed range 1,3-17,8 M/MIN

Wire size range 0,6-2 MM

IP protection IP 23

Length 508 mm

Width 203 mm

Height 394 mm

Weight 11.6 kg

SC 12 RC is delivered equipped for use with 0,8 mm solid

wire. Torch is not included with the unit.


Supplied with:

• 3 m connection cables and hoses for connection to the machine

• V-groove 0.8 mm (0.030") drive roll kit

• Compression spring for spools

• Euro-connector for torch

NB! Torch is not included and must be ordered separately

396

Accessories

Product number Product name Unit

607451 WIRE TORCH T-400 MP W/3M CABLE pcs

Torch spares:

613765 GAS NOZZLE FOR TORCH pcs

594622 CONTACT TIP 0.8 MM set of 10

594630 CONTACT TIP 1.0-1.2 MM set of 10

607455 CONTACT TIP 1.2-1.4MM set of 10

607456 CONTACT TIP 1.6-2.0MM set of 10

613766 NOZZLE INSULATOR F/T-400 set of 5

613763 GAS DIFFUSOR F/T-400 set of 5

613764 NECK INSULATION F.T-400 set of 5

594606 TORCH LINER,TEFLON,0.8-1.2 MM, 4.5 pcs

594614 TORCH LINER,STEEL, 0.8-1.2 MM 3.0 pcs

607457 TORCH LINER, STEEL, 1.4-2.0MM,3.2 pcs

Drive roll kits for SC 12 RC ( 0,8mm V-groove is included with the unit):

603118 DRIVEROLLKIT V-GROOVE 0.8MM .030IN set

603340 DRIVEROLLKIT V-GROOVE 1,2MM .045IN set

603373 DRIVEROLLKIT V-GROOVE 1,6MM 1/16IN set

603142 DRIVEROLLKIT V-KNURLED 0.9MM .035IN set

603126 DRIVEROLLKIT V-KNURLED 1,8MM .07 IN set

603134 DRIVEROLLKIT U-GROOVE 0,9MM .035IN set

603498 DRIVEROLLKIT U-GROOVE 1,6MM 1/16IN set

Cable/hose extensions for use between UWI-400 and SC 12 RC:

670422 EXTENSION CABLE A 25 M pcs

175844 WELDING CABLE 50 MM2 mtr

632893 CABLE CONNECTOR DIX70 MALE-FEMALE pcs

576157 GAS HOSE 1/4" 6.3MM BLACK mtr

175596 HOSE JOINT F/6MM (1/4 INCH) OX HOSE pcs

729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS pcs

397



UUWWRR--85852 W2 WEELLDDING RING REECCTTIFIFIEIERR

191 735860

High capacity 850 A welding machine for air

carbon arc gouging, electrode welding and TIG

welding.

Benefits

• Safe in use

• Efficient

Technical data

Welding current range 50-850 A



Electric phase 3 phase 380/440 V

Electric cycles 50/60 Hz

Recommended fuses (slow) 90/80 A

IP protection 23


Length 966 mm

Width 585 mm

Height 762 mm

Weight 229 kg

Features

• Built-in arc control lets you get in tight without

sticking the electrode- an electrode compensation

circuit ensures consistent arc control performance

regardless of the electrode size

• Hot start: makes it easier to start difficult-to-start stick

electrodes such as E-6010 and E-7018

• Simple control panel features single range amperage

adjustment and provides easy, efficient operation

• Line voltage compensation ensures consistent weld

performance by keeping output power constant even

if primary input power varies by ±10%

• 14-pin receptacle provides quick, direct connection

to remote controls and switches

• Enclosed circuit boards provide additional protection

from contaminants resulting in longer service life

• PC board protection prevents the wire feeder power

or other stray voltages (less than 115 VAC) from

harming the power source PC board

• Thermal overload protection helps prevent machine

damage if the duty cycle is exceeded or airflow is

blocked- a warning light indicates power shutdown

• Fan-On-Demand operates only when needed,

reducing noise, power consumption and the amount

of airborne contaminants pulled through the machine

• 115 V receptacle: provides 15 amps of auxiliary

power with power cord strain relief provided for

convenience at installation


Supplied with:

Instruction manual

NOTE:

Primary cable is not included.

398

Supplied with:

Fixed installation is recomended on the primary side.

Welding cable connection to the machine is done with cable shoes

Accessories


Remote control:



Cables and connectors:

655266 WELDING CABLE 95 MM2

738633 CABLE SHOE 95MM2 10PCS

736744 CABLE CONNECTOR DIX120 MALE-FEMALE

Air carbon arc accessories:








740969 AIR CARBONARC TORCH HEAVYDUTY 1600A

175745 RETURN CLAMP 800A


511006 ELECTRODE HOLDER UNIKING 600AMP
















399



UUPPCC--1041041 P1 PLLAASSMA CMA CUUTTTTEERR

192 404100

Cutting and gouging of all current carrying

materials.

Features

• Best performance to weight ratio on the market:

40mm cutting capacity - weight 16 kg

• Ergonomic robust torch with safety trigger and slim

nozzle design for good overview of the cut

• 6 m torch cable connected directy inside the

machine to reduce size and weight and eliminate

screw connector wear

• Power switch with built in quick fuse and air regulator

with built in self draining water separator for

protection of machine

• Active fan control provides forced air cooling only

when needed, minimizing dust intake

Benefits

• Uses air as cutting gas thereby reducing the need for oxygen and acetylene gas

• Can easily and quickly be brought to work locations

• All current carrying materials can be cut or gouged

Technical data

Cutting current range 20-100A


Electric phase 3

Power supply voltage 440 (400)

Recommended fuses (slow) 20 A (25 A)


Supply pressure 6-7 bar

Setting on machine at free flow 5.0 bar

Air consumption 190 L/min ( 11,4 m3/h)

IP protection IP 23


Length 560 mm

Width 190 mm

Height 320 mm

Weight 16 kg


Ideal for cutting and gouging all electrically conductive

materials. Superior to gas cutting as it also cuts stainless

steel, cast iron, copper alloys and aluminum.

The UPC-1041 is compact and lightweight to move around

on board with its size of 560 x 190 x 320 mm. Cutting

capacity of up to 40 mm thick steel ensures complete cut

also through thick bulbs in beams. Impressive cutting speed

of more than half a meter per minute (13mm steel plate).

High duty cycle and tolerance to ambient temperature will

normally provide completely uninterrupted operation for

manual cutting.

The slim nozzle design gives exceptionally good overview of

the actual cutting arc and provides minimal slag clogging.

Highly efficient for gouging out old welds and opening up

cracks with the optional gouging nozzle.

400


Supplied with:

3 pcs electrodes

1 pc tool for electrodes

3 pcs nozzles 1,2

1 pc spatter shield

1 pc drag shield

Accessories


404114 TORCH WITH 6M CABLE FOR UPC-1041

404115 TORCH WITH 15M CABLE FOR UPC-1041

404005 ELECTRODE LONG F/UPC-1040/1041 5PCS

n/a TOOL FOR ELECTRODE CHANGE

404006 SWIRL RING FOR UPC-1040/1041 2PCS

404007 NOZZLE 1.0 F/UPC-1040/1041 5PCS

404008 NOZZLE 1.2 F/UPC-1040/1041 5PCS

404009 NOZZLE GOUGING F/UPC-1040/1041 5PCS

404010 SHIELD CUP F/UPC-1040/1041 2PCS

404111 SPATTER SHIELD F/UPC-1040/1041 2PCS

404112 DRAG SHIELD F/UPC-1040/1041 2PCS

404016 CIRCLE CUTT. GUIDE F/ UPC-1040/1041

404013 CONSUMABLES KIT F/UPC-1040/1041

401


Cables and Connectors

WWEELLDDING CING CAABBLLEE

Features

• Unitor welding cable is oil resistant, flame resistant

and wear resistant. The conductor is built up from

0.2 mm diameter copper wires to ensure high

flexibiIity

• The Unitor welding cable complies with the

harmonised standard HO1N2D for flexible welding

cable

• The cable is available in cross-section areas 35 mm2,

50 mm2 and 70 mm2, in standard lengths of 10 m,

20 m and 50 m, fitted with Unitor safety connectors

or DIX connectors on request

• The standard length cable extensions are fitted with

Unitor safety cable connectors for optimal protection. Connection to the machine panel sockets is done with 2 pcs

Dix/Unitor conversions

• When cable extensions with safety connectors are used the electrode holder and ground clamp with safety

connectors should be used

Welding cables used on board, on deck or in an engine

room, are exposed to rough weather, oil and mechanical

wear. The welding cable supplied by Unitor has wear, flame

and oil-resistant insulation on a polychloroprene rubber

basis. It is recognized by its marking at regular intervals with

the text “Unitor oil resistant welding cable”, size of cable,

and the standard for welding cable H01N2-D. H01N2-D.


Product number Product name Max Amp 35% duty cycle Weight per 100 m

175836 WELDING CABLE 35 MM2 375 A 41.5 kg

175794 WELDING CABLE 35 MM2 10M 375 A 41.5 kg


175844 WELDING CABLE 50 MM2 480 A 57 kg

175828 WELDING CABLE 50 MM2 10M 480 A 57 kg



175851 WELDING CABLE 70 MM2 600 A 78.5 kg




655266 WELDING CABLE 95 MM2 730 A 106 kg

402



CCAABBLLE CE COONNENNECCTTOORR

Cable connectors must be insulated in such a

way that the danger of handling or short-

circuiting through the deck is reduced to a

minimum. This applies both to connected and

unconnected parts. There should be no

possibility of short-circuiting in connected plugs

and sockets attached to cables, even if they

should come into occasional contact with salt

water.






513044 CABLE CONNE.SAFETY COMPL

CCAABBLLE SE SHOHOEE

Cable shoe for cable - 10 pcs.



632919 CABLE SHOE 35 MM2. 10PCS

632927 CABLE SHOE 50 MM2. 10PCS

632935 CABLE SHOE 70MM2. 10PCS

738633 CABLE SHOE 95MM2 10PCS

403

AADDAAPPTTEER PR PLLUUG DG DIX FIX FEEMAMALLE 7E 70 A0 AND MAND MALLE 25; 2E 25; 2PPCCS PS PEER PR PAACCKK

195 633073

Adapter plug Dix 70/25, female 70 – Male 25, 2

pcs.

PPAARRAALLLLEEL CL COONNENNECCTTING TING THRHREEE WE WAAY CY COONNENNECCTTOORRDDIXIX770 MA0 MALLEE-F-FEEMAMALLEE-F-FEEMAMALLE 2 PE 2 PCCSS

195 632901

Parallel connecting three way connector DIX70

male-female-female 2 pcs

CCOONVNVEERRSSIOION AN ASSSSEEM. 2 PM. 2 PCCSS

195 634121

Conversion assembly, safety/Dix 70 male, 2

pcs. Welding machine panel socketing is done

with 2 pcs Dix/Unitor conversions. When cable

extensions with safety connectors are used, the

electrode holder and ground clamp with safety

connectors should be used.

404



RREEMOMOTTE CE COONTNTRROOL FL FOOR UR UWWRR--30303 W3 WITITH BH BEELLT CT CLLIPIP

191 676916

For regulating UWR-303 amperage from a

distance. Remote control unit to be connected

to remote control cable 10 m.

Features

• Control box with regulating wheel for use when doing

electrode welding or TIG welding

• No need using time going back and forward to

welding machine for regulating amperage

Accessories



RREEMOMOTTE CE COONTNTRROOL CL CAABBLLE 10M FE 10M FOOR UR UWWRR--303033

191 676924

Cable for connecting UWR-303 remote control

to welding machine. To be connected between

remote control unit and UWR-303 welding

machine.

Accessories


676916 REMOTE CONTROL FOR UWR-303

645408 EXTENSION CABLE 25M 4 PIN

405

EEXXTTEENSNSIOION CN CAABBLLE 25M 4 PE 25M 4 PIN FIN FOOR UR UWWRR--303033RREEMOMOTTE CE COONTNTRROOLLSS

191 645408

Cable for extending the distance between

UWR-303 remote control to welding machine.

Extention cable to be used together with remote

control cable for UWR-303.

Accessories



RREEMOMOTTE CE COONTNTRROOL FL FOOR UR UWWI-I-400 F400 FOOR ER ELLHOHOLLDDEERR/T/TIG TIG TOORRCCHH

191 670414

For regulating UWI-400 amperage from a

distance. Remote control 8m to be connected

to UWI-400.

Features

• Fits easily to electrode holder for TIG torch or wire

torch

• Regulating wheel for adjustment of current

Benefits

• Saves time when regulating amperage

• Better control of weld quality when you are able to regulate amperage during welding

Accessories



406



EEXXTTEENSNSIOION CN CAABBLLE A 25 M FE A 25 M FOOR UR UWWI-I-400 R400 REEMOMOTTEECCOONTNTRROOLLSS

191 670422

Cable for extending the distance between UWI-400 remote control to welding machine. Extention

control cable 25m, for use to extend distance between UWI-400 and remote control, or the wire feeder

SC12RC.

Accessories



PPAARRAALLLLEEL CL COONNENNECCTTIOION CN CAABBLLE FE FOOR UR UWWI-I-400400RREEMOMOTTE CE COONTNTRROOLLSS

191 676973

Cable for parallel connection of the remote control outlets for two UWI-400 to be able to use one

remote control to adjust both machines when the welding outlets are connected in parallel.

Important:

If in parallel connection of two UWI 400 machines, both

machines must be switched on. If only one machine is

switched on the current in the parallel cable can damage the

other machine.

Accessories




407


Stick electrode arc accessories

EELLEECCTTRROODDE HOE HOLLDDEER AR ASSSSEEMBMBLLYY

Unitor’s fully insulated electrode holders are of

the lever screw type and feature an especially

robust and safe clamping arrangement for the

electrodes. The holders are of strong and

simple construction.

There are three types of electrode holders

available: the 200A, 400A and 600 A.






522680 EL.HOLDER 400A WITH SAFETYCONNECTOR

528703 AIR CARBON ARC TORCH 600A

740969 AIR CARBONARC TORCH HEAVYDUTY 1600A

EELLEECCTTRROODDE HOE HOLLDDEERRSS

Unitor’s fully insulated electrode holders are of

the lever screw type and feature an especially

robust and safe clamping arrangement for the

electrodes. The holders are of strong and

simple construction. There are three types of

electrode holder available: the 200A, 400A and

600 A.



552497 ELECTRODE HOLDER TWISTY 200AMP

513051 ELECTRODE HOLDER TWISTY 400AMP

511006 ELECTRODE HOLDER UNIKING 600AMP

408



AAIR CIR CAARRBBOON AN ARRC TC TOORRCCH 600A WH 600A WITITH SH SAAFFEETTY AY ANDNDAAIR CIR COONNENNECCTTIOIONN

196 528703

Torch for air carbon arc gouging with safety

cable connector and air connector.

A special jaw-type electrode holder is used for air carbon arc

gouging. The jaws are fitted with nozzles, which direct jets of

compressed air parallel with the electrode to the molten

pool.

The holder is also equipped with a cut-off valve for

compressed air. Compressed air supply of 400–900 L/min at

a pressure of approximately 5–7 bar. The holder will accept

round and flat electrodes.

Supplied with:

• Integrated compressed air hose/welding cable

• Cable connectors

• Quick connector 30UPH for compressed air

AAIR CIR CAARRBBOON AN ARRC TC TOORRCCH HEH HEAAVVYYDDUUTTY 1600AY 1600A

196 740969

A special jaw-type electrode holder is used for

air carbon arc gouging.

The jaws are fitted with nozzles, which direct jets of

compressed air parallel with the electrode to the molten

pool. The holder is also equipped with a cut-off valve for

compressed air. Compressed air supply of 400–900 L/min at

a pressure of approximately 5–7 bar. The holder will accept

round and flat electrodes.

Supplied with:

• Integrated compressed air hose/welding cable

• Cable connectors

• Quick connector 30UPH for compressed air

409



RREETTUURRN CN CLLAAMP AMP ASSSSEEMBMBLLYY

The return connector must be properly

dimensioned to provide good contact for the

welding current load to be used. The positioning

of the return clamp determines how large a part

of the vessel or of the work piece is to be

utilized as part of the welding current circuit.

The return clamp should always be placed as

close as possible to the welding area, or on the

work piece itself if this is not an integral part of

the hull.






633180 RETURN CLAMP ASSY 400 A W/SAFETY

RREETTUURRN CN CLLAAMPMPSS

The thickness of material between welding point

and return clamp must be sufficient to carry the

current load that is to be used. Think carefully

before fixing the return clamp so that sensitive

machine parts such as ball bearings etc. are not

used as a bridge for welding current.

There are four types of return clamps available:

the 200A, 400A, 600A and 800A.



RETURN CLAMP 200A 653881

RETURN CLAMP 400A. 653899

RETURN CLAMP 600 A 653907

RETURN CLAMP 800A 175745

410


TIG Welding Accessories

TTIG WIG WEELLDDING AING ACCCCEESSSSOORRIEIESS

The TIG welding process is in many cases the

only practical solution to several necessary

repair jobs onboard.

The most frequently used applications are welding of

aluminium-brass (Yorcalbro), Cunifer, and stainless, heat

resistant or acid resistant steels, but the process may be

used with good results on practically all weldable materials.

Among the unique advantages of using the argon gas

protected TIG arc as heat source for welding are:

• An easy-to-learn method which may be used in all

positions.

• A stable, intense and well directed heat supply which

ensures deep penetration and small heat affected

zones.

• Clean, smooth welds of high quality, with little need

for finishing (no slag).

The TIG equipment

Unitor's TIG equipment is easy and uncomplicated to use. It

may be used with UWR-rectifiers and touch-start of the

welding arc, or with UWI-inverters with the advantage of lift

arc start.

Apart from the welding machine, a complete TIG-equipment

set consists of a supply of argon gas, gas regulator with

flow-meter, TIG torch and an accessories kit.




160010 TIG TORCH T-161 WITH EUROCONNECTOR



Accessories


551192 SHORT BACK CAP FOR TIG-TORCH

551200 LONG BACK CAP FOR TIG-TORCH

551168 COLLET 1,6MM FOR TIG-TORCH


551184 COLLET BODY 1,6MM FOR TIG-TORCH


551135 TIG NOZZLE 6 FOR TIG-TORCH


674710 TUNGSTEN EL. 1.6MM. 10PCS


411

TTIG TIG TOORRCCH-TH-T--150 W D150 W DIX 25 CIX 25 COONNENNECCTTOORR

197 150000

The T-150 torch is a lightweight torch well

adapted to general applications onboard.

Features

• The torch is rated at a full 150A welding current at

100% duty cycle- at lower duty cycles higher current

may be used

• The handle ensures a secure grip and reduces heat

transfer to the welder’s hand

• A screw type gas valve opens fully at only 3/4 turn,

switches the gas on and off

• Being gas cooled, the torch has low weight and is

easy to operate for repair and maintenance work in

all positions

• Unitor supplies nozzles of aluminium oxide (AL203), recognisable by the pink colour. These nozzles will stand for

higher temperatures than the ordinary ceramic cups, which are recognised by a light brown color. Note that TIG gas

nozzles are brittle and may break if dropped or treated carelessly

• A remote amperage control can be fixed on the TIG torch by velcro straps in order to adjust amperage during

welding

• The torch is equipped with an on/off switch and screw type gas valve.


Supplied with:

• 4 m cable/hose package- separate welding cable

and gas hose ensure that extensions may be easily

connected

• A standard Unitor DIX 25 connector is mounted on

the welding cable, and the gas connection fits directly

onto the Unitor argon regulator or to the standard

right hand threaded screw couplings for gas hoses

The torch is equipped with an on/off switch and screw type

gas valve.

Accessories


Remote control equipment:

719575 REMOTE CONTROL FOR UWI-150 AUTOLINE












412



RREEMOMOTTE CE COONTNTRROOL FL FOOR UR UWWI-I-150 A150 AUUTTOOLLINEINE

191 719575

For adjustment of welding current during TIG

welding.

Features

• Fits easily to TIG torch

• Regulating wheel for adjustment of current

Benefits

• Fast to mount on TIG torch

• No need to stop in order to adjust amperage

• Improves weld quality

413



TTIG TIG TOORRCCH TH T--16161 W1 WITITH 4 M CH 4 M CAABBLLEE, E, EUURROOCCOONNENNECCTTOOR AR AND TND TOORRCCH MOH MOUUNTNTEED TD TRRIGIGGGEERR

193 160010

The T-161 for UWW-161 MP torch is a

lightweight torch well adapted to general

applications onboard.

Features

• The torch is rated at a full 161 amp welding current

at 100% duty cycle. At lower duty cycles higher

current may be used


transfer to the welder’s hand. A torch mounted

trigger opens and closes the argon selenoid valve in

order to control the gas flow, and also controls

current on/off

• Being gas cooled, the torch has low weight and is easy to operate for repair and maintenance work in all positions

• Unitor supplies nozzles of aluminium oxide (AL203), recognizable by the pink colour. These nozzles will stand for

higher temperatures than the ordinary ceramic cups, which are recognized by a light brown color. Note that TIG gas



Supplied with 4 m cable package with euro connector.

Accessories













414



TTIG TIG TOORRCCH TH T--200 W D200 W DIX 7IX 70 C0 COONNENNECCTTOORR

197 200000

The T-200 torch is a lightweight torch well

adapted to general applications onboard.

Features

• The torch is rated at a full 200A welding current at

100% duty cycle. At lower duty cycles higher current

may be used


transfer to the welder’s hand. A screw type gas valve

opens fully at only 3/4 turn, switches the gas on and

off

• Being gas cooled, the torch has low weight and is

easy to operate for repair and maintenance work in

all positions

• Unitor supplies nozzles of aluminium oxide (AL203), recognizable by the pink colour. These nozzles will stand for

higher temperatures than the ordinary ceramic cups, which are recognized by a light brown color. Note that TIG gas


• A remote amperage control can be fixed on the TIG torch by velcro straps in order to adjust amperage during

welding


Supplied with:

• 4 m cable/hose package. Separate welding cable

and gas hose ensure that extensions may be easily

connected

• A standard Unitor DIX 70 connector is mounted on

the welding cable, and the gas connection fits directly

onto the Unitor argon regulator or to the standard

right hand threaded screw couplings for gas hoses.

The torch is equipped with a screw type gas valve.

Accessories

Product number Product name For use with:

Remote control equipment:

670414 REMOTE CONTROL FOR UWI-400 UWI-400

670422 EXTENSION CABLE A 25 M UWI-400 REMOTE AMP EXTENTION CABLE

676916 REMOTE CONTROL FOR UWR-303 UWR-303

676924 REMOTE CONTROL CABLE 10M F/ UWR-303 UWR-303

645408 EXTENSION CABLE 25M 4 PIN UWR-303 REMOTE AMP EXTENTION CABLE





415

Product number Product name For use with:








416



AACCCCEESSSSOORRIEIES KS KIT TIT TIG TIG TOORRCCHH

197 607810

Accessories kit for T-150,T-161 and T-200 TIG-

torches, including short back cap, spare

heatshield, collets, collet bodies, nozzles and

electrodes.

Unitor torches are supplied complete for use, but the

accessories kit is recommended as it contains necessary

spares for 1.6 and 2.4mm tungsten electrodes.


Supplied with:

• Short back cap 1 pcs

• Heat-shield 1 pcs

• ColIet 1.6mm 3 pcs

• CoIlet 2.4mm 3 pcs

• Collet body 1.6 mm 1 pcs

• Collet body 2.4mm 1 pcs

• Alumina nozzle 6 2 pcs

• Alumina nozzle 7 2 pcs

• Tungsten electrodes 1.6 mm alloyed for DC TIG

welding 3 pcs

417



TTUUNGNGSSTTEEN EN ELLEECCTTRROODDE 1.E 1.6MM A6MM ALLLLOOYYEED FD FOOR DR DCCTTIG WIG WEELLDDINGING

197 674710

Tungsten electrode 1.6mm 10 pcs alloyed for

DC TIG welding.

Features

• Environmentally friendly- no radioactive components

• Can be transported, stored and disposed of without

legal restrictions

• Suitable for welding all materials

• Better ignition performance than thorium alloyed type

electrodes

• Low burn off rate, longer service life

• Standardised in national and international norms (ISO 6848, EN 26848, AWS A5.12, JlS Z3233)

Thoriated TIG welding electrodes with 2 % thorium oxide

(colour code red) are currently the most widely used

electrodes worldwide. Thorium is however a radioactive

element and as such represents a potential danger to health

and environment. Thorium is a so-called “a-emitter,” but

when enclosed in a tungsten matrix, the “a” radiation

emitted externally is negligible. The danger to the welder

arises when thorium oxide gets into the respiratory canals.

This problem can occur during welding (vapours) as well as

when grinding the electrode tip (grinding dust). In the near

future, more stringent legal regulations regarding production,

use and disposal of thoriated electrodes are expected. It is

expected that TlG-welding electrodes containing thorium will

disappear from the market in the foreseeable future,

especially as an environmentally friendly and technically

better solution is already available. Unitor tungsten

electrodes are alloyed with Lanthanum (colour code gold)

and are sold in sturdy boxes of 10 pcs.

TTUUNGNGSSTTEEN EN ELLEECCTTRROODDE 2.E 2.4MM A4MM ALLLLOOYYEED FD FOOR DR DCCTTIG WIG WEELLDDINGING

197 674736

Tungsten electrode 2.4mm 10pcs alloyed f.dc

TIG welding.

Features

• Environmentally friendly- no radioactive components

• Can be transported, stored and disposed of without

legal restrictions

• Suitable for welding all materials

• Better ignition performance than thorium alloyed type

electrodes

• Low burn off rate, longer service life

• Standardised in national and international norms (ISO 6848, EN 26848, AWS A5.12, JlS Z3233)

418


Wire Welding Accessories

WWIRIRE TE TOORRCCH TH T--400 W400 WITITH 3M CH 3M CAABBLLE FE FOOR SR S--12R12RCC//SS--22 P22 P12/U12/UWWFF-MP-MP

193 607451

MIG/MAG wire torch to be connected to SC 12

RC wire feeder.

Features

• High capacity air cooled torch

• Adjustable neck

• Ergometric handgrip

Benefits

• No need for water cooling pump system

• Able to reach difficult locations

• Less strain on operator

The torch has an adjustable neck and is delivered complete

with tools for neck adjustment and contact tip change. It is

delivered with a 3m cable, complete with liner and contact

tips for 0,8-1,2mm wire. The teflon liner allows for all wire

types including aluminium.

Accessories

Product number Product name Unit Qty.

613765 GAS NOZZLE FOR TORCH pcs 1

594622 CONTACT TIP 0.8 MM set 10

594630 CONTACT TIP 1.0-1.2 MM set 10

607455 CONTACT TIP 1.2-1.4MM set 10

607456 CONTACT TIP 1.6-2.0MM set 10

613766 NOZZLE INSULATOR F/T-400 set 5

613763 GAS DIFFUSOR F/T-400 set 5

613764 NECK INSULATION F.T-400 set 5

594606 TORCH LINER,TEFLON,0.8-1.2 MM, 4.5 pcs 1

594614 TORCH LINER,STEEL, 0.8-1.2 MM 3.0 pcs 1

607457 TORCH LINER, STEEL, 1.4-2.0MM,3.2 pcs 1

419



DDRRIVIVEERROOLLL AL AND WND WIRIRE GE GUUIDIDE KE KITITS FS FOOR WR WIRIREEFFEEEEDDEER SR SC 12 RC 12 RCC

Driveroll and wire guide kits for wire feeder SC

12 RC


Product Number Product name FOR UNITOR WELDING WIRE

603118 DRIVEROLLKIT V-GROOVE 0.8MM .030IN GSP-W-200 0.8MM

IALBRO-W-237 0.8MM

ICUNI-W-239 0.8MM

603340 DRIVEROLLKIT V-GROOVE 1,2MM .045IN

603373 DRIVEROLLKIT V-GROOVE 1,6MM 1/16IN

603142 DRIVEROLLKIT V-KNURLED 0.9MM .035IN MS-W201 1.0MM

S-316M-GF-221 0.9MM

S-309M-GF-222 0.9MM

603126 DRIVEROLLKIT V-KNURLED 1,8MM .07 IN HST-SF-232 1.7MM

ABRATECH-W-230 1.6MM

603134 DRIVEROLLKIT U-GROOVE 0,9MM .035IN ALUMAG-W-235 1.0MM

603498 DRIVEROLLKIT U-GROOVE 1,6MM 1/16IN

*W-groove 0.8mm included in wire feeder when first

recieved

420



SSPPOOOOL CL COOMPMPRREESSSSIOION SN SPPRRINGING

193 602821

Compression spring for wire feeder SC 12 RC

Note: Included in wire feeder S-22 PI2 when first received.

SSPPOOOOL AL ADDAAPPTTEERR

193 602839

When bigger coils are to be used in wire feeder SC12RC

(245mm dia.x75mm) it is advisable to use the spool adapter.

421



WWIRIRE TE TOORRCCH M-H M-16161 W1 WITITH 3M CH 3M CAABBLLE AE ANDNDEEUURROOCCOONNENNECCTTOOR FR FOOR UR UWWWW--16161 MP1 MP

193 161163

MIG/MAG wire torch to be connected to

UWW-161 MP.

Accessories


160001 GAS NOZZLE FOR UWW-160



711200 UNITOR BACKVAC

712018 10 TIPS 1,0-1.2MM FOR UWW-160 TORCH

590075 NONIRON LINER 1,2MM FOR UWW-160

613746 STEEL LINER F.UP TO 1.2MM F.UWW-160

DDRRIVIVE RE ROOLLLL

Drive rolls and outgoing wire tube for UWW-161

MP



160003 DRIVEROLL V-GROOVE FOR UWW 161

160004 DRIVEROLL U-GROOVE FOR UWW 161

160005 DRIVEROLL KNURLED V-GR.FOR UWW 161

161164 OUTOING WIRE GUIDE TUBE F. UWW-161

422


Shielding gas accessories

AARRGGOON RN REEGGUULLAATTOORR

197 510010

Reduces cylinder pressure to suitable working

pressure and supplies a steady stream of

shielding gas to the torch.

Features

• Provides constant flow of gas at correct pressure

• Safety valve

• Comes with hose connections for 1/4"

• Built according to international norms

Benefits

• No need for adjustment during work

• Provides safe working conditions

• Connects to all standard hose dimensions

• Long lasting quality

Technical data

Max.inlet pressure bar 200

Outlet flow l/min: 0-32 l/min

Safety outlet opens at bar 6.0-7.8

Max. capacity m3/h 2

Cylinder connection 24.32 x 1/14"

Unitor Argon cylinder regulators for Argon/Argon Co2 are

designed for reliability and safety of use. The large

adjustment knobs are black for easy identification of gas

type. Both contents gauge and flow meter are clearly graded

in psi/bar and l/min.

All regulators are delivered with spare washers, hose

connection for 1/4" gas hose and instructions for use.

• Easy identification of gas types with colour coded

adjustment knobs

• Immediate identification of gas pressures with easy to

read gauges marked both in psi and bar

• Full capacity for all types



Accessories




550210 WORKING GAUGE AR/CO2 0-32L/MIN


423



CCOO2 R2 REEGGUULLAATTOORR

193 510012

Reduce cylinder pressure to suitable working

pressure and supply a steady stream of

shielding gas to the torch.

Features

• Provide constant flow of gas at rigth pressure

• Safety valve

• Comes with hose connections for 1/4" and

• Built according to international norms

Benefits

• No need for adjustment during work

• Provide safe working conditions

• Connects to all standard hose dimensions

• Long lasting quality

Max.inlet pressure bar 200

Outlet flow l/min: 0-32 l/min

Safety outlet opens at bar 20

Max.capacity m3/h 40

Cylinder connection CGA320/0.825"-14 NGO-RH-EXT

Unitor C02 regulators for Co2 gas are designed for reliability

and safety of use. The large adjustment knobs are black for

easy identification of gas type. Both contents gauge and

flow meter are clearly graded in psi/bar and l/min.

All regulators are delivered with spare washers, hose

connection for 1/4" gas hose and instructions for use.

• Easy identification of gas types with colour coded

adjustment knobs

• Immediate identification of gas pressures with easy to read

gauges marked both in psi and bar

• Full capacity for all types



Accessories




550210 WORKING GAUGE AR/CO2 0-32L/MIN


424



FFLLOOWWCCOONTNTRROOL NEL NEEEDDLLE VE VAALLVVE FE FOOR GR GAAS FS FLLOOWWAADDJJUUSSTTMEMENTNT

197 597310

Flowcontrol needle valve for gas flow

adjustment.

The flowcontrol needle valve used at the gas

inlet of the machine or the wire feeder gives full

flow adjustment and is available at the work

place regardless of distance to the gas cylinder/

gas outlet.

FFLLOOWWCCOONTNTRROOL MEL METTEERR, A, ARRGGOON FN FOOR UR USSE AE ATTTTOORRCCH NOH NOZZZZLLEE

197 597328

Flowcontrol meter, argon for use at torch

nozzle.

Actual gas flow at the TIG or wire torch may

deviate from what is set on the gas outlet

station or on the cylinder regulator, especially if

long gas hoses are used. The flowcontrol meter

measures actual flow at the torch nozzle and is

a useful tool for the operator.

425


Plasma cutting accessories

CCOONSNSUUMAMABBLLEES KS KIT CIT COOMPMPLLEETTE FE FOOR UR UPPCC--10401040

192 404013

Consumables kit complete



404013 CONSUMABLES KIT F/UPC-1040/1041

The kit includes:

3 pcs electrodes

1 pcs tool for electrodes

3 pcs nozzles 1,2

1 pcs spatter shield

1 pcs drag shield

AACCCCEESSSSOORRIEIES FS FOOR UR UPPCC--10401040/104/10411



404014 TORCH WITH 6 M CABLE FOR UPC-1040




404016 CIRCLE CUTTING GUIDE FOR UPC-1040

404005 ELECTRODE LONG FOR UPC-1040 5 PCS

404007 NOZZLE 1.0 20-50A F/UPC-1040 5 PCS

404008 NOZZLE 1.2 50-100A F/UPC-1040 5 PCS

404009 NOZZLE GOUGING 2.5 F/UPC-1040/1041 5 PCS

404006 SWIRL RING FOR UPC-1040 2 PCS

404010 SHIELD CUP FOR UPC-1040 2 PCS

404011 SPATTER SHIELD FOR UPC-1040 2 PCS

404111 DRAG SHIELD LONG FOR UPC-1040 2 PCS

404112 DRAG SHIELD LONG FOR UPC-1041 2 PCS

426


Current distribution system

CCUURRRREENT DNT DISISTTRRIBIBUUTTIOION SN SYYSSTTEEMM

Unitor welding current distribution system may be tailor

made to suit the specific needs of ship or offshore

installations. The basic rule in this system is that the main

welding power source(s) are located permanently in the

workshop. The welding machine will be connected to the

inlet station in the distribution system by flying leads, when

welding outside the work shop. Permanently installed

welding and remote control cables lead to the welding

outlets, which are mounted on strategic places for

immediate use by the welders on board, providing the

following advantages:

• Accidental falling/tripping due to loose cables along

decks, in ladders etc. are avoided

• Accidental short circuiting somewhere along the often

excessive lengths of live welding cables lying about is

prevented

• The need for replacement of damaged lengths of

welding cable is eliminated

• Manhandling of long welding cables, often more time

consuming and strenuous than the actual welding

job, is avoided

• Fire and gas proof doors can be kept shut

• Outlets in possible gas danger areas may be

disconnected when not in use

• Permanently installed and correctly dimensioned

cables ensure more efficient use of power from

welding machine

• Correct welding parameters are easily obtainable as

all the remote control possibilities of the welding

machine is available at the outlet

The inlet/outlets are made in stainless steel quality. The

hinged door is closed with a key. The remote control socket

is a 10 pole amphenol type, female for both inlet and outlet

stations. The socket is equipped with a screw cover. The

remote control connection is done with a special connection

cable and/or adaptor. A red diode 130 V AC is placed

between the welding terminals to warn when outlet is live.

The housing is mounted to the bulkhead by use of brackets

that are included with the inlets / outlets. Installation, with

size and positions of cable glands will vary for different

installations, therefore glands are not included, and holes for

cable glands have not been drilled / locked out in the

housing. This must be done by the installer. Connection of

welding cables in the inlet/outlet is done with cable shoes.

Cable size must be chosen according to welding machine.

There is a 10 position connection rail for connection of

remote control cable. Minimum 1,0 mm2 cable for remote

control is recommended. The system comes in two sizes,

for 400A and 800A. The 400A boxes uses standard Dix 70

contacts for welding current, male on inlet station and

female on the outlet, and standard Dix 70 cable connectors

are used for connection. The 800A boxes use special heavy

duty Dix 120 contacts for welding current, male on inlet

station and female on the outlet. For these contacts the

special Dix 120 cable connectors must be used. These

connectors allow for up to 120mm2 welding cable



624320 INLET STATION WELDING CURRENT 400A

624338 OUTLET STATION WELDING CURRENT 400A

736728 INLET STATION WELDING CURRENT 800A

736736 OUTLET STATION WELDING CURRENT 800A

608760 REMOTE CONNECTION CABLE FOR UWI-400

603993 REMOTE CONNECTION CABLE FOR UWR-303

604157 REMOTE CONTROL ADAPTER FOR UWI-400

604306 REMOTE CONTROL ADAPTER FOR UWR-303



427



INLINLEET ST STTAATTIOION WN WEELLDDING CING CUURRRREENT 400ANT 400A

195 624320

Inlet station in a current distribution system 400A. Connection point for flying leeds from the welding

machine.

Benefits

Being part of the current distribution system:

• Welding and return cables are placed in cable trays

• No damage to cables

• Accidental falling/tripping due to loose cables along decks are avoided

• Accidental short circuiting of live welding cables is prevented

• Less time consuming manhandling of welding cables


• No need for replacement of damaged cables

Technical data

Height 230mm

Width 230mm

Depth 150mm

The inlet stations are made of stainless steel quality. The

hinged door is closed with a key. The inlet station is rated for

400A and uses standard Dix 70 male contacts. The remote

control socket is a 10 poole amphenol type female for the

inlet station. The socket is equipped with a screw cover. A

red diode 130V AC is placed between the welding terminals

to warn when inlet station is live. The housing is mounted to

the bulkhead by use of brackets that are included with the

inlet station.

428



OOUUTTLLEET ST STTAATTIOION WN WEELLDDING CING CUURRRREENT 400ANT 400A

195 624338

Outlet station in a current distribution system

400A. Connection point for the welding and

return cables.

Benefits




• Accidental falling/tripping due to loose cables along

decks are avoided

• Accidental short circuiting of live welding cables is

prevented



Technical data

Height 300mm

Width 300mm

Depth 200mm

The outlet station are made of stainless steel quality. The

hinged door is closed with a key. The outlet station is rated

for 400A and uses

standard Dix 70 female contacts. The remote control socket

is a 10 poole amphenol type female for outlet station. The

socket is equiped with a screw cover. A red diode 130V AC

is placed beteen the welding terminals to warn when inlet

station is live. The housing is mounted to the bulkhead by

use of brackets that are included with the inlet station.

429

INLINLEET ST STTAATTIOION WN WEELLDDING CING CUURRRREENT 800ANT 800A

195 736728

Inlet station in a current distribution system 800A. Connection point for flying leeds from the welding

machine.

Features





• Accidental short circuiting of live welding cables is prevented. Less time consuming manhandling of welding cables



Technical data

Height 300mm

Width 300mm

Depth 200mm

The inlet stations are made of stainless steel quality. The

hinged door is closed with a key. The inlet station is rated for

800A and uses Dix 120 male contacts. The remote control

socket is a 10 poole amphenol type female for inlet station.

The socket is equipped with a screw cover. A red diode

130V AC is placed between the welding terminals to warn

when inlet station is live. The housing is mounted to the

bulkhead by use of brackets that are included with the inlet

station.

OOUUTTLLEET ST STTAATTIOION WN WEELLDDING CING CUURRRREENT 800ANT 800A

195 736736

Outlet station in a current distribution system 800A. Connection point for the welding and return cables.

Features





• Accidental short circuiting of live welding cables is prevented. Less time consuming manhandling of welding cables



Technical data

Height 300mm

Width 300mm

Depth 200mm

The outlet stations are made of stainless steel quality. The

hinged door is closed with a key. The outlet station is rated

for 800A and uses Dix 120 female contacts. The remote

control socket is a 10 poole amphenol type female for outlet

station. The socket is equiped with a screw cover. A red

diode 130V AC is placed between the welding terminals to

warn when inlet station is live. The housing is mounted to

the bulkhead by use of brackets that are included with the

inlet station.

430



RREEMOMOTTE CE COONNENNECCTTIOION CN CAABBLLE FE FOOR UR UWWI-I-400 6M, 14400 6M, 14PPIN FIN FEEMAMALLEE/10 P/10 PIN MAIN MALLEE

191 608760

6m cable with amphenol contact for connecting welding machine to the inlet station.

Features

• Correct welding parameters are easily obtainable as all the remote control possibilities of the welding machine are

available at the outlet station.

RREEMOMOTTE CE COONNENNECCTTIOION CN CAABBLLE FE FOOR UR UWWRR--30303 6M, 43 6M, 4PPIN MAIN MALLEE/10 P/10 PIN MAIN MALLEE

191 603993

6m cable with amphenol contact for connecting welding machine to the inlet station.

Features

• Correct welding parameters are easily obtainable as all the remote control possibilities of the welding machine is


431



RREEMOMOTTE CE COONTNTRROOL AL ADDAAPPTTEER FR FOOR UR UWWI-I-400 14 P400 14 PININFFEEMAMALLEE/10 P/10 PIN MAIN MALLEE

191 604157

Adapter for outlet station remote control and UWI-400 / UWR-852 remote control cable.

Features




The remote control adapter is fitted between outlet station and remote control cable.

RREEMOMOTTE CE COONTNTRROOL AL ADDAAPPTTEER FR FOOR UR UWWRR--30303 4 P3 4 PININFFEEMAMALLEE/10 P/10 PIN MAIN MALLEE

191 604306

Adapter for outlet station remote control and UWR-303 remote control cable

Features



432


Welder's Protection

AAUUTTOOVVISISIOION PN PLLUUS FS FRREESSH AH AIR WIR WEELLDDSSHIEHIELLD WD WITITHHRREESSPPIRIRAATTOORRY UY UNITNIT

196 767000

Head mounted face shield for protection of the

welder's eyes and face against rays, heat and

sparks during welding. Also prevents inhalation

of welding fumes.

Features

• Air pump respiratory unit

• Automatic darkening filter glass

• Adjustable shade of darkness

• Darkening filter powered by solar panel (the light from

the arc)

• Conforms to relevant standards

Benefits

• Gives user clean filtered air and prevents fume inhalation and accidents

• Protects welder from developing " arc eye". More accurate start location when welding is to commence

• Same face shield can be used for all arc welding processes and amperage settings

• No need for battery change or charging


This shield is the AutoVision Plus with respiratory unit. It

gives the user clean, filtered air inside the helmet, and

prevents inhalation of welding fumes. The airflow will keep

the user fresh and let him concentrate on the work. The kit is

CE approved and conforms to EN 12941-TH2P. The fan

battery recharges in 2-4 hours and will provide up to 220

litres per minute for at least 8 hours.

Accessories


766997 AUTOVISION PLUS OUTSIDE COVER LENS

766998 AUTOVISION PLUS HEADBAND COMPLETE

766999 AUTOVISION PLUS FRESHAIR HEADGEAR

767002 AUTOVISION PLUS FRESHAIR FACE SEAL

767003 AUTOVISION PLUS FRESHAIR FILTER

Approvals

CE

433


Welder's Protection

AAUUTTOOVVISISIOION PN PLLUUS WS WEELLDDING SING SHIEHIELLDD

196 767001



sparks during welding

Features

• Automatic darkening filter glass

• Adjustable shade of darkness

• Darkening filter powered by solar panel (the light from

the arc)


Benefits

• Protects welder from developing " arc eye". More

accurate start location when welding is to

commence

• Same face shield can be used for all arc welding

processes and amperage settings

• No need for battery change or charging


The basis is a lightweight well designed shield which allows

good air flow for the welder, and a head band that allows

unique possibilities for adjustment:

• Distance to face

• Angle in relation to face

• Height on head

• Head diameter

• Stay-up friction

Replaceable inside and outside protective lenses, headband

and the sweatband for the headband is available as a spare.

The shield is equipped with a light powered quick automatic

darkening glass that switches from low shade (4) to selected

shade within to selected dark state within 0,4 milliseconds

(0,0004 sec). The low shade state allows for good vision

while chipping slag, grinding and repositioning for next arc

striking. Dark mode is adjusted with a knob at the side of the

shield, from shade 9 to 13 which is from the lowest TIG

welding settings (5-10A) to extreme processes at + 400A arc

current.

Accessories


766997 AUTOVISION PLUS OUTSIDE COVER LENS

766998 AUTOVISION PLUS HEADBAND COMPLETE

434

FFLLIPIPVVISISIOION WN WEELLDDING FING FAACCE SE SHIEHIELLD WD WITITHHHEHEAADDBBAAND AND AND SND SHAHADDE 11 GE 11 GLLAASSSS

196 709485



sparks during welding

Features

• Flip up frame

• Lightweight design

• Adjustable headband

• Conform to relevant standards

Benefits

• Protects welder when chipping slag and when

grinding

• Comfortable to use

• Fits all head sizes


The Flipvision face shield with head band fitted with a flip-up

front frame.

A clear safety glass is placed in the fixed frame under the

flip-up frame protecting the eyes when chipping slag. The

flip-up front frame is fitted with a filter shade glass with

shade selected according to welding current used. The filter

shade glass is protected against spatter by a clear

protection glass fitted in front of it. Shade 11 glass is

supplied as standard with the shield. A welder should bear in

mind that proper protection is absolutely necessary to guard

himself against the danger of ultra-violet rays and bits of

welding slag in the eye.

Unitor face shields for welding are made from a lightweight,

robust plastic material which is unaffected by heat, cold or

moisture, and both glasses and shields conform to relevant

EN standards.

Accessories

Product number Product name Amperage Filter Shade Quantity in Unit

633230 SHADE 8 GLASS. 5SET < 20 A 8-9 5 sets

633248 SHADE 9 GLASS. 5SET 20–40 A 9-10 5 sets

633255 SHADE 10 GLASS. 5SET 40–80 A 10 5 sets


633271 SHADE 12 GLASS. 5 SET 175–300 A 12 5 sets


633214 PROTECTION GLASS. 10PCS 10 pcs

633222 SAFETY GLASS. 10PCS 10 pcs

709493 HEADBAND FOR AUTOVISION+FLIPVISION

709501 SWEAT BAND F/AUTOVISION+FLIPVISION

435

SSAAFFEETTY HEY HELLMEMET WT WITITH FH FAACCE SE SHIEHIELLD AD AND SND SHAHADDE 11E 11GGLLAASSSS

196 619114

Safety helmet mounted face shield for

protection of the welder's eyes and face against

rays, heat and sparks during welding

Features

• Safety helmet

• Flip up frame

• Lightweight design

• Adjustable headband


Benefits

• Protects welder from head injury

• Protects welder when chipping slag and when grinding


• Fits all head sizes


This is the flip vision face shield fitted with safety helmet

instead of head band.

A clear safety glass is placed in the fixed frame under the

flip-up frame protecting the eyes when chipping slag. The

flip-up front frame is fitted with a filter shade glass with

shade selected according to welding current used. The filter

shade glass is protected against spatter by a clear

protection glass fitted in front of it. Shade 11 glass is

supplied as standard with the shield.

A welder should bear in mind that proper protection is

absolutely necessary to guard himself against the danger of

ultra-violet rays and bits of welding slag in the eye.




EN standards.

Accessories










436


Welder's Protection

FFAACCE SE SHIEHIELLD WD WITITH HAH HANDNDLLE AE AND FND FILILTTEER SR SHAHADDE 11E 11GGLLAASSSS

196 619098

Hand held face shield for protection of welders eyes and face towards rays, heat and sparks during

welding

Features

• Sturdy lightweight design

• Conforms to relevant stadards

Benefits





electric shocks, burns, ultra-violet rays and bits of welding

slag in the eye.




EN standards.

The face shield with handle is supplied with shade 11 dark

glass and clear protection glass as standard. It is designed

to also protect the hand holding it from radiation.

Accessories










437

AARRC WC WEELLDDING GING GLLAASSSSEESS

Filter glasses for arc welding

The glasses have dimensions 60 x110 mm and are

manufactured in accordance with DIN standard and are CE

approved. When ordering face shields, filter shade glass of

correct shade should be ordered in addition to the filter

shade 11 glasses which is included. The filter glasses are

supplied in sets consisting of 5 safety glasses, 5 protection

glasses and 5 filter shade glasses.











Approvals

CE

AAUUTTOOVVISISIOION ON OUUTTSSIDIDE CE COOVVEER LR LEENS 10PNS 10PCCSS

196 709469

Outside cover lens 10pcs 112 x 93mm for autovision old model.

AAUUTTOOVVISISIOION INSN INSIDIDE CE COOVVEER LR LEENS 10PNS 10PCCSS

196 709477

Inside cover lens 10pcs 97 x 47mm for autovision old model

438


Welder's Protection

PPRROOTTEECCTTIVIVE CE CLLOOTTHINGHING



electric shocks, burns, ultra-violet rays or bits of welding

slag in the eye. Made from specially treated leather, these

protective garments are heat and moisture resistant. They

provide good protection during welding, especially when the

welder has to work close to the workpiece, or where

movement is limited. It is especially important that a welding

jacket is worn when welding in the overhead position, to

protect the body and arms against falling sparks and slag.





633057 WORKING GLOVES. 12 PAIRS

510438 LEATHER JACKET LARGE

510446 LEATHER JACKET EX LARGE

633016 LEATHER TROUSERS W/BELT

175935 LEATHER CUFFS PAIR

184184 ARM PROTECTOR PAIR

510453 LEATHER SPATS. PAIR

633040 ELECTRODE QUIVER LEATHER MAX 2KG

439


Welder's Protection

WWEELLDDING CING CUURRTTAAIN WIN WITITH HOH HOOOKKSS

196 633065

Welding curtain with hooks

The purpose of the welding curtain is to avoid other

personnel being harmed by the welding work taking place.

The curtain reduces light emission , but still enables one to

see trough the curtain. It is made of self-extinguishing

material. The size of the curtain is 2 m high and 1,3 m wide.

The top of the curtain has 7 holes and the curtain comes

complete with 7 heavy-duty hooks. With the hooks the

curtain can be put in a frame, or hooked up on an existing

pipe or wire. Maximum pipe diameter which the hooks will fit

on is 41 mm. In order for the curtain to be drawn freely the

pipe should be less than 30 mm. It is possible to join two or

more curtains together by the use of snap on buttons along

the side. The curtain with hooks is supplied in a plastic bag.

WWEELLDDING SING SPPAATTTTEER BR BLLAANKNKEET 1 X 10MM OT 1 X 10MM ON RN ROOLLLL

196 646067

Welding spatter blanket 1 x 10mm on roll

Non-asbestos woven glass fabric with a fire retardent

weavelock, for protecting combustible materials and delicate

machinery from spatter and spark during welding and

cutting. Available in a roll 1m x 10m. Nom. Thickness

0,82mm. Max operating temperature 550 °C.

The welding blanket is supplied in a carton box.

440


Welder's Protection

FFUUME CME CLLEEAAN 230 CN 230 COOMPMPLLEETTEE

196 735878

Welding fume extractor

Features

• Compact and lightweight

• Connects to 1 phase 230V

• High filteration capacity

• Automatic start stop function

Benefits


• Power points for 230V available

• Protects welder against inhalation of harmful welding

fumes

• No need for manual operation of start/stop

With this unit a welder is easily protected against inhaling

welding fumes that might have harmful effects. It is compact

and lightweight and can be used anywhere a welder can

work.

Four-stage filtration system

When the welding fumes enter the unit they first pass a

metal pre-separator, then the fumes flow through a

aluminium pre-filter and into the main filter which has a total

area of 12m2. The large area of the main filter provides a

long life and a constant high efficiency since filter cleaning

does not have to take place very frequently. The last stage is

a High Efficiency Particle Arrestor HEPA 12 which

guarantees a filtration efficiency of 99.9% under all

circumstances.

Active carbon filter

If required an optional activated carbon filter can be placed

on top of the main filter to remove smell. It is also possible to

add hoses on the exhaust side to completely remove the

filtered air from the area if required.

Two powerful motors The two motors guarantee an

adequate extraction capacity under all conditions. At low

welding fume concentrations, the extraction capacity can be

halved, in which situation both motors operate at half speed,

thus providing a lower noise level and reduced maintenance.

Automatic start

When the welding cable is placed in a slit on top of the unit

the automatic start/stop function can be used and the unit

will automatically switch on when welding starts and off

when welding stops.

For Accessories and spare parts, please contact Customer

Services.



735878 FUMECLEAN-230 WELD. FUME EXTRACTOR

Supplied with: 2,5m hose and nozzle with magnet foot.

441


Welder's Tools

WWIRIRE BE BRRUUSSHH

A wire brush is used for cleaning the welding

surface, removal of slag, rust etc. The brush is

available with steel or stainless steel bristles.


Product number Product name Unit

632976 WIRE BRUSH STEEL. 6PCS 6 pcs

632984 WIRE BRUSH STAINL. 6PCS 6 pcs

CCHIPHIPPPING HAING HAMMEMMERR

The chipping hammer is used for the removal of

slag after arc welding. The hammer is of robust

construction and well balanced. Available in

steel or stainless steel.


Product Number Product name Unit

633008 CHIPPING HAMMER ST. 2PCS pck

632992 CHIPPING HAMMER STAINLESS pcs

442


Welder's Tools

WWEELLDDING GING GAAUUGGE TE TYYPPE J FE J FOOR TR THRHROOAAT TT THICHICKKNENESSSSAAND RND REEINFINFOORRCCEEMEMENTNT

196 516161

Welding gauge type J is for measuring 60, 70,

80 and 90 degree groove angel effective throat

thickness up to 20mm and reinforcements up to

10mm.

MUMULLTTI PI PUURRPPOOSSE PE PLLIEIER FR FOOR WR WIRIRE TE TOORRCCHH

193 591990

Plier for use cutting wire on all MIG/MAG wire

torches.

The multipurpose pliers provides means for

spatter removal from the nozzle inside, tip and

outside.

It has jaws for contact tip and nozzle removal

and installation, and for cutting and pulling wire.

443


Welder's Tools

WWEELLDDEERRS CS CHAHALLKK, F, FLLAAT 5XT 5X13X13X121277. 144 P. 144 PCCSS/P/PAACCKK

196 632968

Welders chalk, flat 5x13x127. 144 pcs/pack.

Welders chalk is used to mark out positions

when gas and plasma cutting on metals. The

chalk is flat and can easily be kept in pocekts

and tool boxes.

TTEEMPMPEERRAATTUURRE INDE INDICICAATTOOR KR KITIT

196 633081

Temperature indicator kit 200/400/600/800°C

Temperature sticks are a wax that melt at a

preset temperature. Simply select a stick with

the desired temperature and make a mark on

the surface to be heated. When the stick mark

goes from solid to liquid the temperature have

been reached.

GGAALLVVAANIZNIZING SING SPPRRAAYY. 6 P. 6 PCCSS

196 633156

Galvanizing spray 400 ml in a box, 6 pcs.

For touching up pipes where galvanizing has been burnt of during welding.

444


Welder's Tools

AANTNTI SI SPPAATTTTEER SR SPPRRAAYY, 400 ML IN A B, 400 ML IN A BOOXX, 6 P, 6 PCCSS

196 633149

Anti spatter spray, 400 ml in a box, 6 pcs.

By spraying on a thin layer on each side of where the

welding is to take place, a barrier is formed preventing the

molten globules from burning on to the surface.

The spatter can easily be wiped off with a brush after

welding.

The anti spatter spray prevents the spatter from the welding

arc from sticking to the metal surface being welded.

Time consuming chipping and grinding is prevented.

445


Welder's Tools

MAMAGGNANAFFLLUUX CX CRRAACCK DK DEETTEECCTTIOION KN KITIT

096 653535

Magnaflux crack detection kit comes in convenient shoulder carry case and consists of 3 pcs cleaner,

2 pcs penetrant, 3 pcs developer and 1pc cloth.

By using dye penetrant we can detect surface cracks not

readily visible to the eye. The dye penetrant kits consist of a

cleaner to clean the surface for grease and oil, a dye

penetrant that penetrates down in cracks and porosity, and

a developer. It is a low cost and easy to use inspection

method.

Step 1)

Remove surface rust, scale, paint by mechanical means,

spray cleaner to degrease the inspection area. Leave to dry.

Step 2) Spray penetrant over the area and allow to soak for

about ten minutes.

Step 3) Remove all excess penetrant using a dry cloth and

wipe dry.

Step 4) Spray developer evenly over the inspection area and

wait a few minutes until the area dries white. Any surface

defects will appear in red contrast.



653543 CLEANER SKC-S 10 PCS 400ML EACH

653550 PENETRANT SKL-SP1 10 PCS 400ML EACH

653568 DEVELOPER SKD-S2 10 PCS 400ML EACH

446


Welder's Tools

CCLLEEAANENER SR SKKCC-S-S. 10 P. 10 PCCSS

096 653543

Magnaflux cleaner 10 cans of 400ml in a carton.

Remove surface rust, scale, paint by mechanical means,

spray cleaner to degrease the inspection area. Leave to dry.

Accessories

for SKC-S, SKL-SP1, SKD-S2


653535 MAGNAFLUX CRACK DETECTION KIT 3+2+3

PPEENENETTRRAANT SNT SKKLL-S-SPP1. 10 P1. 10 PCCSS

096 653550

Magnaflux penetrant 10 cans of 400ml in a carton.

Spray penetrant over the area and allow to soak for about

10 minutes. Remove all excess penetrant using a dry cloth

and wipe dry.

DDEEVVEELLOOPPEER SR SKKDD-S-S2. 10 P2. 10 PCCSS

096 653568

Magnaflux developer 10 cans of 400ml in a carton.

Spray developer evenly over the inspection area and wait a

few minutes until the area dries white. Any surface defects

will appear in red contrast.

447

MAMARRINE PINE PRROODDUUCCTTSS Arc Welding Consumables and Storing

Information about coated stick electrodes

INFINFOORRMAMATTIOION AN ABBOOUUT CT COOAATTEED SD STTICICKKEELLEECCTTRROODDEESS

General description

The Unitor standard electrode range contains

electrodes for:

• Mild and low alloy steels

• Cast steels

• Heat resistant steel

• Low temperature steel

• Weathering steel

• Stainless and acid-resistant steels

• Tool- and machine-part steels

• Cast iron

• Aluminium and aluminium alloys

• Copper and copper alloys

• Air-carbon-arc gouging

• Gouging with standard equipment

A product range selected for maritime use:

High quality coupled with versatility is a basic factor for the

selection of arc welding electrodes in the Unitor standard

range. It is composed to cover all normally occurring

applications onboard, yet to be as compact as possible.

Each electrode therefore covers a wide range of

applications. This reduces the number of electrode types

needed onboard.

With the best welding properties:

Special care has been taken to select electrodes with the

best all-round welding properties. Easily welded electrodes

are necessary to achieve good results without too stringet

demands on the welder's skill. Welding onboard often

requires awkward positions. The Unitor standard range has

been composed with this in mind, whenever possible the

electrodes' welding properties are equally good also in the

vertical and under-up positions.

LMA properties

All electrode coatings are hygroscopic (they absorb moisture

from the atmosphere ). When welding the moisture turns into

hydrogen in the arc that again ends up as hydrogen porosity

in the weld deposit. Combined with other undesirable effects

this can turn into hydrogen cracking also known as cold

cracking in the weld. In order to extend the electrodes

usable lifetime and safeguard against cold cracking, the

Unitor electrodes for structural work have been given Low

Moisture Absorption properties when manufactured. This

greatly reduces the electrodes moisture absorption rate.

Electrodes with LMA properties are marked "LMA

electrodes".

Packed for maritime conditions:

The electrode box is made of high density polyethylene

making it the right place for storing and protecting

electrodes from moisture pickup, contamination and

physical damage. The information label that is placed on the

box gives all relevant information to how the electrodes are

to be used. Label, cap and box are made out of the same

recycled material and does not need to be separated when

recycling.

With full instructions for use:

The label on each box fully identifies the contents, and also

gives basic information on application areas. Complete

information on each electrode, with instructions for use and

448

application examples are given in the Unitor handbook for

maritime welders

Directions for use

Classifications and approvals - Unalloyed, Low Alloyed and Stainless Steel:

Product Name AWS EN DNV GL LR BV ABS

GPO-302 N E 6013 E 38 0 RC 11 2 2 2 2 2

GPR-300 H E 7024 E 24 0 RR 73 2 2 2 Y 2 2

SPECIAL-303 N E 7016 E 38 2B 32 H10 3YH10 3YH10 3H15 3,3YH10 3H10,3Y

LH-314 N E 7018 E 42 4 B 42 H5 3YH5 3YH5 3YH5 3YH5 3YH5

LHH-314 H E 7028 E 42 4 B 73 H5 3YH5 3YH10 3 YH5 3YH5 3YH5

LHV-316 N E 8018-G E 46 5 B 41 H5 3YH10 4YH10 4Y40H10 3YH10 3Y

LHT-318 N E 8018-B2 E CrMo 1B 42 H5 -H10 - - UP SR

LHL-319 N E 8018-C1 E 46 6 2Ni B 32 H5 5YH10 6Y46H5 5Y42H5 3YH5 3Y400H5

LHR-320 N E 8018-G E 46 5 Z B 32 3YH10 3YH15 3YH15 3YH10 3YH5

18/8-321 N E 316L-17 E 19 12 3 L R 1 2 316L 4571 316L 316L E316L-17

23/14-322 N E 309MoL-17 E 23 12 2 L R 3 2 309Mo 4459 SS/Mn 309Mo STEEL TO STAINLESS

DUPLEX-325 N E 2209-17 E 22 9 3 N L R 3 2 YES 4462 - 2209 DUPLEX

.

449


Coated Stick Electrodes

UUNITNITOOR RR RAANGNGE OE OF MAF MAINTINTEENANANCNCE EE ELLEECCTTRROODDEESS

Unitor range of maintenance electrodes


Product

Number Product name Diameter Application onboard

699165 GPO-302N 2.5X350MM

295 PCS 5,2KG

2,5 Unalloyed steel. General applications. Easy to weld, all positions including vertical down.

699173 GPO-302N 3.2X350MM

190 PCS 5.4 KG


699181 GPO-302N 4.0X350MM

120 PCS 5.2 KG


699231 GPR-300H 3.2X450MM 85

PCS 5.8 KG

3,2 Unalloyed steel. Large welds in flat position.

699249 GPR-300H 4.0X450MM 51

PCS 5.5 KG


699256 GPR-300H 5.0X450MM 35

PCS 5.6 KG


699260 GPR-300H 6.0X450MM 23

PCS 5.3KG


699199 SPECIAL-303N

2.0X350MM 115PCS

1,7KG

2,0 Unalloyed & Low alloyed Steel. Thin plate material. General applications. Double coated electrode,

easy to weld.

699207 SPECIAL-303N

2.5X350MM 220PCS

4,1KG


easy to weld.

699215 SPECIAL-303N

3.2X350MM 120PCS

4,1KG


easy to weld.

699223 SPECIAL-303N

4.0X450MM 75 PCS 5,2KG


easy to weld.

699264 LH-314N BOX 2.5X350MM 2,5 Unalloyed & Low alloyed Steel. General applications.

699272 LH-314N 3.2X450MM96

PCS 5KG

3,2 Unalloyed & Low alloyed Steel. General applications.

699280 LH-314N 4.0X450MM 78

PCS 5.6 KG

4,0 Unalloyed & Low alloyed Steel. General applications.

699298 LHH-314H 4.0X450MM 54

PCS 5.5 KG

4,0 Unalloyed & Low alloyed Steel. Large welds in flat position

699306 LHH-314H 5.0X450MM 36

PCS 5.5 KG

5,0 Unalloyed & Low alloyed Steel. Large welds in flat position

699314 LHV-316N 3.2X350MM

137 PCS 4.8 KG

3,2 Unalloyed & Low alloyed Steel. Specially suitable for vertical down welding.

699322 LHV-316N 4.0X350MM 99

PCS 5.0 KG

4,0 Unalloyed & Low alloyed Steel. Specially suitable for vertical down welding

699330 LHT-318N 2.5X350MM 75

PCS 1.7 KG

2,5 High temp. steel Boiler plates and pipes up to 550 dgr.C. Up tp 1% Cr, 0,5% Mo.

450

Product


699348 LHT-318N 3.2X350MM 48

PCS 1.7 KG

3,2 High temp. steel Boiler plates and pipes up to 550 dgr.C. Up tp 1% Cr, 0,5% Mo.

683631 LHL-319N 2.5X350MM 78

PCS 1.8 KG

2,5 Low temp.steel Ice Class hull plates. Up to 2,7%Ni

683649 LHL-319N 3.2X350MM 48

PCS 1.8 KG

3,2 Low temp.steel Ice Class hull plates. Up to 2,7%Ni

683656 LHR-320 N 2.5X350MM 88

PCS 1.7 KG

2,5 Weather resistant steel Corrosion resistant to sea-water and flue gases.

699389 LHR-320N 3.2X350MM 48

PCS 1.8 KG

3,2 Weather resistant steel Corrosion resistant to sea-water and flue gases.

699397 18/8-321N 1.6X300MM

213 PCS 1,7 KG

1,6 Stainless steel AISI 304/316 L. Tanks, piping, pumps and valves.

699405 18/8-321N 2.5X300MM

89 PCS 1.7 KG


699413 18/8-321N 3.2X300MM

54 PCS 1.7 KG


699421 23/14-322N 2.5X300MM

84 PCS 1.7 KG

2,5 Stainless steel AISI 309. Joining stainless to steel. Compound steel. Stainless steel overlays.

699439 23/14-322N 3.2X350MM

50 PCS 2.0 KG

3,2 Stainless steel AISI 309. Joining stainless to steel. Compound steel. Stainless steel overlays.

699447 23/14-322N 4.0X350MM 4,0 Stainless steel AISI 309. Joining stainless to steel. Compound steel. Stainless steel overlays.

699454 DUPLEX-325N 2.5X300MM

91 PCS 1.7 KG

2,5 Duplex steel. Joining of duplex to stainless and steel.

699462 DUPLEX-325N 3.2X350MM

55 PCS 2.0 KG

3,2 Duplex steel. Joining of duplex to stainless and steel.

699470 TENSILE-328N

2.5X300MM 79PCS 1.6 KG

2,5 Difficult to weld steel Spring steel, vanadium steel, tool steel, high carbon steel.

699488 TENSILE-328N

3.2X350MM 50PCS 2.0 KG

3,2 Difficult to weld steel Spring steel, vanadium steel, tool steel, high carbon steel

699512 NIFE-334N 3.2X350MM 68

PCS 2.2 KG

3,2 Cast Iron. High strength. Many layers. Joining cast iron to steel.

699520 NIFE-334N 4.0X350MM 4,0 Cast Iron. High strength. Many layers. Joining cast iron to steel.

699496 NICKEL-333N 2.5X300MM

121PCS 2.0 KG

2,5 Oily cast iron. Tolerant to high Carbon content.

699504 NICKEL-333N 3.2X350 68

PCS 2.2 KG

3,2 Oily cast iron. Tolerant to high Carbon content.

606458 TINBRO-341 3.2 X 350 MM

42PCS 1.4KG

3,2 Copper alloys Bronze and brass. Joining copper alloys to steel.

606457 ALBRONZE-344 3.2X350

MM

3,2 Bronze an brass. Joining copper alloys to steel.

699538 ALUMIN-351N 3.2X350MM

82 PCS 1.1 KG

3,2 Aluminium Rolled, deawn and castings.

606454 WEARMAX-327 2.5 X

350MM 49PCS 1,6KG

2,5 Hard surfacing. Wear resistant overlays. Winchwheel pockets, cable drums.

606455 WEARMAX-327 3.2 X

350MM 68PCS 3,5KG


606456 WEARMAX-327 4.0 X

350MM 42PCS 3,4KG


725275 ABRATECH-330

3.2X350MM 68 PCS 3,5KG

3,2 Hard surfacing, wear resistant overlay against gauging abrasion, pressure and impact. Application

include welding work onboard dredgers and cement carriers.

451

Product


606460 IMPACT-329S 3.2 X

350MM 39PCS 1.4KG

3,2 Hard surfacing. High temp. Wear resistant overlays. Exhaust valves.

606461 IMPACT-329S 4.0 X

350MM

4,0 Hard surfacing. High temp. Wear resistant overlays. Exhaust valves.

606459 CH2-382 3.2 X 350MM 36

PCS 1.4 KG

3,2 Chamfering/Gauging Using standard equipment.

758474 ACA-384 6.3X305MM 50

PCS 0.8 KG

6,3 Chamfering/Gauging. Air carbon arc gouging. Gouging and weld removal using compressed air.

758466 ACA-384 8.0X305MM 50

PCS 1.3 KG

8,0 Chamfering/Gauging. Air carbon arc gouging. Gouging and weld removal using compressed air.

758458 ACA-384 15X5X305MM 50

PCS 2.1 KG

15x5 Chamfering/Gauging. Air carbon arc gouging. Gouging and weld removal using compressed air.

452



GGPPOO--30302N2N

Electrode for welding of mild steel.

Features

• Unitor high density polyethylene packing

• Strikes and restricts easily

• All positions including vertical down

• Superb arc stability

• Bridge large gaps

• Approved by classification societies for mild steels

Benefits

• Can be stored for long time

• Superb for tack welding

• No need to use additional special electrode

• Easy to use

• Can do the job even if edge preparation is not up to standard

• In compliance with maritime rules and regulations

General purpose organic-rutile coated electrodes for

unalloyed steels. Easily weldable in all positions including

vertical down. Suitable for bridging large gaps.

Excellent for all-purpose repair welding of mild steel.


Product Number Product name Welding current range Polarity Weight

699165 GPO-302N 2.5X350MM 295 PCS 5,2KG 60-100 A AC, DC+/- 5.2 kg

699173 GPO-302N 3.2X350MM 190 PCS 5.4 KG 80-150 A AC, DC+/- 5.4 kg

699181 GPO-302N 4.0X350MM 120 PCS 5.2 KG 100-200 A AC, DC+/- 5.2 kg

453



GGPPRR--300H300H

High recovery electrode for welding of mild

steel.

Features


• High deposition rate

• Can be rested in the joint during welding

• Approved by classification societies for mild steels

Benefits

• Can be stored for long time without moisture pick up

• Greatly improves on the time to do the job

• Makes the welding easy to perform


High recovery rutile type electrodes for unalloyed steels.

Easy to use in the horizontal position with a speed of up to

50 cm/min., and a throat thickness up to 3.5 - 6 mm in one

layer. Self-releasing slag. Also suited for steels protected

with zinc- or iron-oxide based primers.



699231 GPR-300H 3.2X450MM 85 PCS 5.8 KG 130-170 A AC, DC+/- 5.8 kg



699260 GPR-300H 6.0X450MM 23 PCS 5.3KG 300-430 A AC, DC+/- 5.3 kg

454



SSPPEECCIAIALL--30303N3N

Electrode for welding of mild steel and ship

quality steel.

Features

• LMA electrode


• Double coated electrode

• Approved by classification societies for higher tensile

steels

Benefits

• Electrodes can be exposed longer in the open


• Easy to use


Low hydrogen double coated electrode for welding of

unalloyed and low alloyed ship quality steel. The 2 mm

electrode is specially suited for thin plate welding. LMA

electrode



699199 SPECIAL-303N 2.0X350MM 115PCS 1,7KG 40-80 A AC, DC + 1.7 kg



699223 SPECIAL-303N 4.0X450MM 75 PCS 5,2KG 120-190 A AC, DC + 5.2 kg

455



LLH-H-314N314N

Electrode for welding of mild steel and ship

quality steel.

Features

• LMA electrode



steels

Benefits




A reliable basic all-around electrode for unalloyed and low

alloyed ship quality steels, high deposition rate, deposit with

high

resistance against impact and cracking. Easily removable

slag, good building properties. LMA electrode



699264 LH-314N BOX 2.5X350MM 45-105 A DC + 4.0 kg

699272 LH-314N 3.2X450MM96 PCS 5KG 95-155 A DC + 5.0 kg

699280 LH-314N 4.0X450MM 78 PCS 5.6 KG 125-210 A DC + 5.6 kg

456



LLHH-HH-314H314H

High recovery electrode for welding of mild and

ship quality steel.

Features

• LMA electrode


• High deposition rate



steels

Benefits



• Greatly improve on the time to do the job



High recovery basic type electrode for unalloyed and low

alloyed ship quality steels. Easy to use in the flat position by

doing contact welding. LMA electrode



699298 LHH-314H 4.0X450MM 54 PCS 5.5 KG 170-240 A DC + 5.5 kg

699306 LHH-314H 5.0X450MM 36 PCS 5.5 KG 225-355 A DC + 5.5 kg

457



LLHVHV--316N316N

Vertical down welding electrode for welding of

mild steel and ship quality steel.

Features

• LMA electrode


• Vertical down welding



steels

Benefits



• Greatly improve on the time to do the job



Low hydrogen heavily coated basic electrode for unalloyed

and low alloyed ship quality steels, especially suited for

vertical

down welding in addition to other positions. Practically self-

releasing slag, high deposition rate. LMA electrode



699314 LHV-316N 3.2X350MM 137 PCS 4.8 KG 110-150 A DC+ 4.8 kg

699322 LHV-316N 4.0X350MM 99 PCS 5.0 KG 180-220 A DC+ 4.0 kg

458



LLHTHT--318N318N

Electrode for welding of high temperature steel.

Features

• LMA electrode


• Approved by classification societies for boiler tubes

and boiler plates with 1%Cr, 1/2% Mo and temp. up

to 550°C

Benefits




Low hydrogen basic coated electrode for heat resistant low

alloy steels with up to 1% Chromium an 0.5% Molybdenum.

Used on boiler plates and pipes for working temperatures up

to 550°C. LMA electrode



699330 LHT-318N 2.5X350MM 75 PCS 1.7 KG 70-105 A DC +/- 1.7 kg

699348 LHT-318N 3.2X350MM 48 PCS 1.7 KG 95-150 A DC +/- 1.7 kg

459



LLHLHL--319N319N

Electrode for welding of low temperature steel.

Features

• LMA electrode


• Approved by classification societies for low

temperature ice class hull plates with up to 2,6% Ni

Benefits



• Can be used safely

Low hydrogen basic coated electrode for low temperature

steel with 2,7% Ni. Plates and pipes used for low

temperature

AC cargo. Ice class hull plates. Exellent impact toughness at

-80°C. LMA electrode



683631 LHL-319N 2.5X350MM 78 PCS 1.8 KG 70-110 A AC, DC + 1.8 kg

683649 LHL-319N 3.2X350MM 48 PCS 1.8 KG 105-150 A AC, DC + 1.8 kg

460



LLHRHR--320N320N

Electrode for welding of weathering steel.

Features

• LMA electrode


• Approved by classification societies for weathering

steels like Cor-Ten A and Patinax steel

Benefits



• Can be used safely

Low hydrogen basic coated electrode for welding of

weathering steel. Good corrosion resistance to sea water

and flue gases. Especially suitable for steels where

protective paint coating wears off (hull plating on ice

breakers). LMA electrode


Product Number Product Name Welding current range Polarity Weight

683656 LHR-320N 2.5 X 350MM 80-115 A AC,DC + 1.7 kg

699389 LHR-320N 3.2 X 350MM 100-150 A AC,DC + 1.8 kg

461



18/8-18/8-321N321N

Electrode for welding of stainless steel.

Features

• LMA electrode


• Approved by classification societies for welding of

stainless steel

Benefits




Rutile-basic electrodes for welding corrosion-resistant

austenitic steels containing 16-18% Chromium, 10-14%

Nickel and 2-3% Molybdenum, e.g. AISI:316/316L, TP-316/

H, CF-3M/8M/8C, CPF 8M/10 MC. LMA electrode



699397 18/8-321N 1.6X300MM 213 PCS 1,7 KG 35-45 A AC,DC + 1.7 kg

699405 18/8-321N 2.5X300MM 89 PCS 1.7 KG 45-90 A AC,DC + 1.7 kg

699413 18/8-321N 3.2X300MM 54 PCS 1.7 KG 60-135 A AC,DC + 1.7 kg

462



2323/14-/14-322N322N

Electrode for welding of stainless steel to mild

steel, compound steel and stainless steel

overlays.

Features

• LMA electrode



stainless steel to steel and compound steel

Benefits




Rutile-basic electrode for welding corrosion-resistant steels

among themselves and to mild steels, for clad CrNiMo steels

and for corrosion resistant layers on mild steels. Also for

heat resistant steel with 19-21% Chromium and 11-13%

nickel. LMA electrode



699421 23/14-322N 2.5X300MM 84 PCS 1.7 KG 50-90 A AC,DC+ 1.7 kg

699439 23/14-322N 3.2X350MM 50 PCS 2.0 KG 90-120 A AC,DC+ 2.0 kg

699447 23/14-322N 4.0X350MM 85-180 A AC,DC+ 2.0 kg

463



DDUUPPLLEEXX--325N325N

Electrode for welding of duplex steel, duplex to

mild steel and duplex to stainless steel

Features

• LMA electrode



duplex steel

Benefits




Rutile basic type electrode for welding of duplex

stainless steel used in tanks, cargo loading pipes, heating

coils and as ladder materials on board. Also for joining

duplex steel to mild steel, duplex steel to stainless steel and

stainless steel to mild steel. High resistance to general

corrosion and pitting corrosion. Applicable up to a service

temperature of 250°C. LMA electrode



699454 DUPLEX-325N 2.5X300MM 91 PCS 1.7 KG 50-90 A AC,DC + 1.7 kg

699462 DUPLEX-325N 3.2X350MM 55 PCS 2.0 KG 80-120 A AC,DC + 2.0 kg

464



PPICICKKLLING GING GEEL 2 LL 2 LITITRRE FE FOOR SR STTAAINLINLEESSS SS STTEEEELL

095 661778

Pickling gel for removal discoloration and

passivation of surface after welding.

Features

• HD polyethylene container together with brush

• In gel state

Benefits

• Safe handling and ready to use

• Product will stick in vertical and overhead positions

Technical information

Weight 2.5 kg

Unitor pickling gel is used to remove oxides and

discoloration on stainless steel welds and surrounding

surfaces. Apply with a brush, leave the gel to work for 50

minutes. Remove with water.

465



TTEENSNSILILEE--328N328N

Electrode for welding of difficult to weld steel.

Features



• Easy slag removal and smooth weld surface

• High strength

Benefits


• Easy to use

• Little surface treatment needed

• Less possibility for joint failure during operation

Electrodes for most high-alloy steels like spring-steels,

carbon steels, tool steels etc. High resistance against

cracking, heat and corrosion. Extremely hard wearing,

polishes to high gloss with low friction.



699470 TENSILE-328N 2.5X300MM 79PCS 1.6 KG 50-85 A AC,DC+ 1.6 kg

699488 TENSILE-328N 3.2X350MM 50PCS 2.0 KG 80-125 A AC,DC+ 2.0 kg

466



IMPIMPAACCTT--329S329S

Electrode for welding of heat resistant overlays

Features




• High resistance to high temperature wear

Benefits


• Easy to use


• Deposit will last longer resulting in less need for

rewelding

Special cobalt alloy electrodes for building up exhaustvalve

spindles in combustion engines, producing homogenous,

non-porous, machineable welds highly resistant to impact,

heat and corrosion.



606460 IMPACT-329S 3.2 X 350MM 70-120 A AC,DC+ 1.4 kg

606461 IMPACT-329S 4.0 X 350MM 90-150 A AC,DC+ 1.4 kg

467



WWEEAARRMAMAXX--323277

Electrode for welding of wear resistant overlays.

Features




• High resistance to wear

Benefits


• Easy to use



rewelding

Special electrode for joining and overlaying whenever there

is wear from wires, chains or organic substances, e.g. worn

winch wheels and anchor windlass wheels on anchoring

systems.

Cargo handling and dredger equipment.



606454 WEARMAX-327 2.5 X 350MM 49PCS 1,6KG 75-140 A AC,DC+ 1.6

606455 WEARMAX-327 3.2 X 350MM 68PCS 3,5KG 90-170 A AC,DC+ 3.5 kg

606456 WEARMAX-327 4.0 X 350MM 42PCS 3,4KG 120-240 A AC,DC+ 3.4 kg

468



AABBRRAATTEECCH-H-330330

Electrode for welding of abrasive wear and

impact resistant overlays.

Features




• High resistance to abrasive wear

Benefits


• Easy to use



rewelding

Hard surfacing, wear resistant overlay against gauging

abrasion, pressure and impact. Applications include welding

work onboard dredgers and cement carriers.



725275 ABRATECH-330 3.2X350MM 68 PCS 3,5KG 100-150 A AC,DC+ 3.5 kg

469



NICNICKKEELL--333N333N

Electrode for welding of cast iron

Features




• Very good on oily cast iron

Benefits


• Easy to use


• Less porosity in deposit resulting in less required

grinding

Nickel electrodes (98% Ni) for welding of gray cast iron

to itself or to steel. Especially good for old oil-soaked and

corroded cast iron, and also for joining cast iron to steel,

copper, copper alloys and stainless steel.



699496 NICKEL-333N 2.5X300MM 121PCS 2.0 KG 55-110 A AC,DC +/- 2.0 kg

699504 NICKEL-333N 3.2X350 68 PCS 2.2 KG 80-140 A AC,DC +/- 2.2 kg

470



NIFNIFEE--334N334N

Electrode for welding of cast iron

Features




• High strength

Benefits


• Easy to use



Nickel-Iron electrodes for welding of cast iron. Especially

suited for welding on larger dimensions in all positions, cast

iron to steel, and for building up parts. High tensile strength.



699512 NIFE-334N 3.2X350MM 68 PCS 2.2 KG 75-100 A AC,DC+/- 2.2 kg

699520 NIFE-334N 4.0X350MM 85-160 A AC,DC+/- 2.4 kg

471

TTINBINBRROO--34341 3.1 3.2X2X3350MM 42 E50MM 42 ELLEECCTTRROODDEES 1.S 1.4K4KGG

096 606458

Electrode for welding of copper alloys.

Features




• Suitable for most copper alloys

Benefits


• Easy to use


• Right first time

Weight 1.4 kg

Diameter 3.2 mm

Ampere 70-90 A

Polarity DC+

Electrodes for welding bronze, copper or brass to itself and

to steel, cast iron and nickel alloys. Also for building up

parts, or filling cavities.

AALLBBRROONZNZEE--344 3.344 3.2X2X3350MM 46 E50MM 46 ELLEECCTTRROODDEES 1.S 1.3K3KGG

096 606457

Electrode for welding of copper alloys.

Features




• High strength and resistance against cavitations and

sea water corrosion

Benefits

• Long storage lifespan without moisture pick up

• Easy to use


• Right first time

Weight 1.3 kg

Diameter 3.2 mm

Amperage 80-160 A

Polarity AC,DC+

472



AALLUUMIN-MIN-3351N 3.51N 3.2X2X3350MM 82 E50MM 82 ELLEECCTTRROODDEES 1.S 1.1K1KGG

096 699538

Electrode for welding of aluminium.

Features

• Unitor high density polyethylene packing in

combination with vacuum packing

• Good arc stability

• High strength

Benefits


• Easy to use


Technical data

Weight 1.0 kg

Diameter 3.2 mm

Amperage 70-110 A

Polarity DC+

473



CCH2-H2-382 3.382 3.2X2X3350MM 36 E50MM 36 ELLEECCTTRROODDEES 1.S 1.4K4KGG

096 606459

Electrode for chamfering

Features


• Suitable for all metallic materials.

• Stable arc

• Can be used with standard equipment without use of

compressed air

Benefits


• No need to worry about chemistry of base material

• Easy to use

• No need to invest in special equipment

Technical data

Weight 1.4 kg

Diameter 3.2 mm

Amperage 160-280 A

Polarity AC,DC +/-

474



AACCAA--384384

Electrode for air carbon arc gouging

Features

• Suitable for all metallic materials

• High capacity removal of metal

• Stable arc

Benefits

• No need to worry about chemistry of base material

• Cuts down time it takes to do the job

• Easy to use

Carbon-graphite electrode for gouging

by use of compressed air. Special torch required.



758474 ACA-384 6.3 x 305mm 200-350 A DC+ 0.8 kg

758466 ACA-384 8.0 x 305mm 200-450 A DC+ 1.3 kg

758458 ACA-384 15X5 x 305mm 400-600 A DC+ 2.1 kg

475


Electrode Storing Cabinets

MINIDMINIDRRYYEERR- 3- 350 C50 CAAPPAACCITITY 8KY 8KG EG ELLEECCTTRROODDEESS

094 637827

Restores moist electrodes

Features

• Connects to 230V 1 phase

• Compact and lightweight

• Adjustable temperature up to 350°C

Benefits

• Sockets for 230V easily available

• Transports quickly and easily

• Avoid cracking of welds due to high hydrogen level in

electrode coating

• Restores the electrodes to their original state thereby

saving the investment

Technical data

Electrode capacity 8 kg

Dimensions 170D x 170W x 570H mm

Net weight 7kg

Heating element 230 V, 50/60 Hz, 1 phase, 400W

Thermostat control 100°C to 350°C

The Minidryer-350 is designed to restore moist electrodes,

or to pre-dry electrodes before welding when this is required.

The dryer may be used with electrodes of both 350 and 450

mm length. With the cover in an open position, the

electrodes will protrude approximately 40mm and are easily

accessible. The Minidryer-350 is equipped with 2 m primary

cable and plug. It has a thermostat for continuous selection

of the temperature from 100 to 350°C (212°F to 662°F). The

dryer is very robust in design and is insulated all-over with 40

mm mineral wool. It can also stand permanently in a tilted

position. When the dryer is in a tilted position, the cover

cannot stand open, but always closes to prevent the

intrusion of unwanted moist air. When the dryer is tilted, a

rim around the opening prevents rainwater from entering.

Caution:

Use gloves when handling warm electrodes from inside the

Minidryer- 350. No chemical products are to be used in the

dryer. This product should be used for drying electrodes

only.

Accessories

Product Number Product Name

637835 Heating element

637843 Thermostat w.reg.knot

476



HEHEAATTING CING CAABBINEINET - 85 CT - 85 CAAPPAACCITITY 3Y 350K50KGGEELLEECCTTRROODDEESS

094 637850

Storing of electrodes

Features

• Connects to 230V 1 phase

• Adjustable temperature from 30-85 °C

• Slanted shelves

• Electric active parts enclosed in bottom

Benefits

• Power points for 230V easily available

• Keeping electrodes at proper temperature during

storing thereby saving the investment

• Prevents content from sliding out during rough seas

• Safe in operation

Technical data

Electrode capacity 350kg

Dimensions 1095H x 564W x 640D mm

Net weight 70kg

Heating element 230 V, 50/60 Hz, 1 phase, 500 W

Thermostat control 30–85 °C

This cabinet is specially designed as a ship's store for repair

and maintenance electrodes. A thermostat allows for

stepless setting of the temperature from 30 °C up to 85 °C

(86 °F up to 185 °F). The cabinet contains five shelves and

every shelf is removable. The shelves are slanted to prevent

the content from sliding out when the door is opened in

rough seas. The active parts in this oven are enclosed in a

cassett located in the bottom of the oven. This unit can be

easily removed as one unit. The heating cabinet - 85 have

100mm mineral wool in the bottoom and 50mm in the top

and side walls. The oven has a simple yet rugged

construction, and can be transported with a fork lift truck.

Caution: Use gloves when handling warm electrodes from

inside the heating cabinet. No chemical products are to be

used within the heating cabinet.

Accessories

Product Number Product Name

777853 Cassette w/heating element thermostat w/reg knot

637876 Heating element

637884 Thermostat w/reg knot

477



EELLEECCTTRROODDE CE CAABBINEINET ET EMPMPTTY FY FOOR 2R 27 P7 PCCSSEELLEECCTTRROODDE PE PAACCKKAAGGEESS

094 669994

Empty storing cabinet for electrodes

Features

• Compact design


• Large storing capacity

Benefits



• Opportunity to customise content to the ship's need

Technical data

Dimensions 600H x 600W x 300D mm

Weight 37,5 kg

Electrode cabinet empty with room for 27 electrode boxes

and the unitor handbook for maritime welders.

NB! Necessary free distance above cabinet 310mm.

478



EELLEECCTTRROODDE CE CAABBINEINET CT COOMPMPLLEETTE WE WITITH 2H 27 P7 PCCKKSSOOF EF ELLEECCTTRROODDEESS

094 670000

A complete ‘mini-store’ for covered electrodes,

including 27 packages of electrodes selected to

cover all normally occuring welding applications

on mild steels, ship quality steel, stainless

steels, ‘problem steels’, cast iron, copper alloys

and aluminium.

Features

• Compact design


• Broad range of electrodes and sizes

Benefits



• Able to provide electrodes for all normal repair

applications onboard

• Compact design with easy access to contents and

separate room for the welding handbook

• Sturdy, corrosion resistant construction from

electrogalvanized steel plates, with final coating by

powder spraying and baking, and zinc/yellow-

chromate passivated shelves for optimal corrosion

and scratch resistance

• The construction leaves room for an optional heating

element which will keep higher than ambient

temperature and a dry atmosphere inside, providing

increased protection from moisture to the electrodes.

Technical data

Dimensions: 600 h x 600 w x 300 d mm

Necessary free distance above cabinet 310 mm

Weight with electrodes: 111 kg

479


Cabinet supplied with:

Name Size (mm) Qty Kg

Sheet metal and thin walled pipes

SPECIAL-303N 2.0 1 1.7

General mild steel repairs, all positions

GPO-302 N 2.5 1 5.2

GPO-302 N 3.2 2 10.8

GPO-302 N 4.0 1 5.2

General mild steel repairs, horizontal, high recovery

GPR-300 H 4.0 1 5.5

GPR-300 H 5.0 1 5.6

Ship quality steel and cast steel:

SPECIAL-303 N 2.5 1 4.1

SPECIAL-303 N 3.2 2 8.2

SPECIAL-303 N 4.0 1 5.2

Ship quality steel, horizontal, high recovery

LHH-314 H 5.0 1 5.5

Ship quality steel, vertical down welding

LHV-316 N 3.2 1 4.8

Heat resistant steel

LHT-318 N 2.5 1 1.7

LHT-318 N 3.2 1 1.7

Low temperature steel

LHL-319 N 3.2 1 1.8

Weathering resistant steel

LHR-320 N 3.2 1 1.8

Stainless steel, stainless to mild steel, compound steel:

18/8-321 N 2.5 1 1.7

18/8-321 N 3.2 1 1.7

23/14-322 N 3.2 1 2.0

Problem steels

TENSILE-328 N 2.5 1 1.6

Cast iron

NICKEL-333 N 2.5 1 2.0

NICKEL-333 N 3.2 1 2.2

Aluminium

ALUMIN-351 N 3.2 1 1.1

Bronze & brass

ALBRONZE-344 3.2 1 1.3

Hardfacing

WEARMAX-327 2.5 1 1.6

Cutting & gouging

CH-2-382 3.2 1 1.4

480


Arc Welding Wires

WWIRIRE FE FOOR WR WIRIRE WE WEELLDDINGING

In wire welding an arc is struck between a continuosly fed

wire and the workpiece. An inert gas, active gas or a mixture

of the two protects the pool from the surrounding air. The

wire used can be solid or flux cored. In some cases the flux

cored wire is self shielded and does not require any

additional shielding gas.

Unitor standard range of welding wires for gas metal arc

welding (GMAW) and flux cored arc welding (FCAW) is

supplied on 200mm diameter spools, 51 mm width, shaft

diameter 50 mm. The spools are packed in individually

sealed plastic bags and cardboard cartons and labelled with

information fully identifying the wire with technical data and

classifications. The labels also provide basic information on

use.


Product

Number Product name Description

590117 GPS-W 200 0,8MM WELD. WIRE

5,0KG

Solid wire for gas metal arc welding of structual steels

160100 MS-W-201 SELFSHIELDWIRE

0,8MM 4.5KG

General purpose Self-Shielded wire for welding of mild steel and ships steel. All position welding,

including vertical down

597518 S316M-GF,221,0.9MM WELD.

WIRE 2.5KG

Flux cored wire for stainless steel: AISI 304 and 316 L

606041 S-309M GF-222 1.0MM WELD.

WIRE2.5KG

Flux cored wire for welding of stainless steel and welding mild steel to stainless steel. Also welding

of clad steel.

590109 ICUNI-W 239 0,8MM 2,0 KG Solid wire for welding copper- nickel alloys (cunifer) in wrought or cast form, containing up to 30%

Nickel.

777972 IALBRO-W 237 0,8MM WELD. WIRE

5,0KG

Solid wire for welding bronze/brass alloys including aluminium bronzes like yorkalbro.

590083 ALUMAG-W 235 1,0MM 2,0KG Solid wire for welding of all common wrought and cast aluminium alloys e.g. AlMg, AlMgMn,

AlMgSi and AiMg (Cu).

230230 ABRATECH-W-230 1,6MM 15KG

SPOOL

Self-Shielded flux cored wire for hard surfacing

481

RROODDS AS AND FND FLLUUXXEES FS FOOR TR TIG WIG WEELLDDINGING

In tungsten insert gas welding (TIG), an arc is struck

between a tungsten electrode and the workpiece. An inert

gas flow (argon) protects the electrode and pool from the

surrounding air. The electrodes do not melt. The filler metal is

inserted into the molten pool in the form of a seperate rod.

The process has a similar welding technique as gas welding

but uses electricity as the energy source.

Unitor rods for TIG welding are supplied in sealed plastic

containers. All rods are supplied in 500 mm lengths for

convenient use. The label on each container fully identifies

the contents, and also gives rod data and basic information

on application areas and use.


Product

Number

Product

name Description

Welding rods

604850 IMS-210 2.0

X 500 MM

1,5KG

Unitor IMS is a welding rod for unalloyed and low alloyed steels. 2 .0 mm Rods with diameter are most used for TIG

welding.

305532 ICROMO-216

2.5 X 500

MM 1,0KG

lcromo is a chromium-molybdenum alloyed welding rod for heat resistant steels types 10 Cr Mo-910 and 13 Mo-44 found

in boiler tubes and other heat resistant components. Gas or tensile strength 560 Mpa.

602979 18/8MO-221

2.0 X 500

MM 0,5KG

18/8 Mo is a wire for welding stainless and acid resistant steel. The silisium content of the wire ensures smooth transfer

and good profile of the bead. Application areas are similar to the coated electrode 18/8-321 N in 1.7 mm, but with the

advantages TIG can offer. When welding very thin sheets and pipes (less than 2mm) it is always an advantage to use the

TIG process. This is also an advantage for the root bead when welding thicker sheets with prepared V-grooves.

725309 IDUPLEX-222

2.0 X 500

MM 0,5KG

Iduplex-222 is a TIG rod for welding Duplex stainless steel, Duplex to Mild steel and Duplex to Stainless steel. The deposit

offers elevated mechanical strength and toughness resistance to stress corrosion cracking. It is an advantage to use TIG

welding in thin sheets and pipe walls. Can also be used for welding the root run in thick wall piping where the rest of the

groove is filled up using the duplex electrode Duplex-325 N.

335547 ICUNI-30

239 2.5 X

500 MM

2,0KG

A welding rod for TIG welding of copper nickel alloys, for example Cunifer pipes. No flux is used in this process. Typical

applications are welding flanges on pipes, pipe joints, patching leaking pipes etc. Joint surfaces and adjacent areas must

be thoroughly cleaned before welding. Small diameter Cunifer pipes can be joined by means of overlap joints (capillary

action) using AG-60 silver solder combined with AG-60 Flux.

519736 IALBRO-237

MF 2.4 X

500MM

1,4KG

IALBRO is a flux-coated filler rod for TIG welding of aluminiumbrass pipes (Yorcalbro). This type of alloy is widely used in

seawater resistant piping. In TIG welding of joints it is strongly recommended that I-Flux 238 be applied to both sides of the

joint on the inside. Yorcalbro pipes with a diameter less than 4” which can be joined by means of an overlap joint (capillary

action) may be silver brazed using AG-60 combined with Albro Flux.

Flux

603092 I-FLUX

238PF. 250G

Unitor flux is supplied in paste form for use with the TIG rod Ialbro-237 MF for welding of Yorcalbro. The flux is

complementary to the flux found in the serrations of the lalbro TIG rod. While the flux on the rod is sufficient for the actual

welding zone, it is strongly recommended to use additional IFLUX on both sides of the joint, especially on the inside of e.g.

pipes. This will improve bonding and penetration. Flux residues must be washed off with water after welding. IFLUX is

supplied in 250 gram tins.

482

CCOOLLD RD REEPPAAIR PIR POOLLYYMEMER CR COOMPMPOOUUNDNDSS

Unitor metalgrade and ceramigrade products are a range of

cold curing metal repair and rebuilding materials based on

the latest polymer resin technology which is the result of

many years of development. Unitor rubbergrade products

are cold-vulcanising elastomeric repair materials for use on

rubber as well as metal components. The products are

compatible with all ferrous and non-ferrous metals as well as

most plastics, and have in many cases proven themselves

as permanent repairs. They have excellent chemical

resistance and are suitable for permanent immersion in

many environments including seawater, hydrocarbons, oils

and a very wide range of chemical solutions. The basic

range of products is selected in order to provide a versatile

program for onboard applications. The application areas

complement and extend the various welding and related

thermal processes already in use, providing an even more

complete repair system than previously.


Product

Number

Product

name Description

659300 POLYMER KIT-

ALFA

Complete basic cold curing polymer kit for emergency repairs.

630384 LEAK-STOP

PIPE REPAIR I

A special bandage impregnated with a resin system which is activated by immersion in water. Ideal for repairs to leaking

pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick be used to plug the actual hole

before putting on the tape.

606006 LEAK-STOP

PIPE REPAIR II


pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick be used to plug the actual hole


630392 LEAK-STOP

PIPE REPAIR III


pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick can be used to plug the actual hole


659227 METALGRADE

READY-STICK

Base and activator in two separate sticks. Cut off the needed length and knead the two parts together until streak free. Use

for sealing of leaks in pipes, tanks, ducts etc. Can be used together with Leak Stop to plug the hole before wrapping the

tape. Set of 3 pairs of sticks giving: 0,72 kg Repair Compound

659235 METALGRADE

EXPRESS

A two component extremely fast cold-curing metal repair compound supplied in Base and Activator containers. Used

wherever there is an emergency and urgent need to get equipment back into action. Base & Activator giving: 0,25 l Rapid

Repair Compound.

659243 METALGRADE

REBUILD

A two component normal cold-curing engineering repair compound. A good machineable product with high mechanical

properties and good heat resistance. Base & Activator giving: 0,50 l Engineering Repair Compound.

663427 METAL GRADE

HI - TEMP

A ceramic and stainless-filled one part water based paste. It is temperature resistant up to 1093 °C (2000 °F). It is used to

seal joints, defects, cracks and voids in cast iron, steel and stainless steel 10 pouches giving: 0,13 l Repair Compound.

659250 AQUAGRADE

REBUILD

A two component engineering repair compound.The product can be applied mixed and will cure under water. Preferably

mix above water. Base & Activator giving: 0,5 l Engineering Repair Compound.

659268 CERAMIGRADE

REBUILD

A two component ceramic cold-curing compound with excellent resistance to cavitation and erosion found in fluid flow

environments. Used for rebuilding heavy wear on pumps, impellers, valves etc. Base & Activator giving: 0,5 l Engineering

Repair Compound.

659276 CERAMIGRADE

LINER

A two component ceramic cold curing fluid that is used as a liner in order to prevent cavitation and erosion found in fluid

flow environments. Base & Activator giving: 0,5 l Engineering Repair Fluid.

725291 CERAMIGRADE

ABRASHIELD

5.4KG

A two component ceramic cold curing compound with excellent resistance against heavy abrasion. Specifically ment for

Dredgers and Cement carriers.

659284 RUBBERGRADE

6 REBUILD

A two component cold-curing vulcanising repair compound. Provides a strong long term repair on rubber items or on

metallic surfaces. For repairs of hoses, gaskets, electric cables etc. Set of 3 x 0,143 l Engineering Repair Compound

659292 RUBBERGRADE

6 REMOULD

A two component cold-curing vulcanising repair fluid that can be moulded or painted on to rubber or metallic surfaces. Set

3 x 0,143 l Engineering Repair Fluid.

483

MAMARRINE PINE PRROODDUUCCTTSS Cold Repair System

Cold Repair Polymer Compounds

PPOOLLYYMEMER KR KITIT

106 659300

Complete basic cold curing polymer kit for

emergency repairs.

Features

• Each product has its specified place

• Compact design

• Broad range of different products

Benefits


• Requires little space

• Able to provide cold curing polymer products for all

normal repair applications onboard

The complete polymer repair system KIT ALFA is available in

a handy kit for easy storage and transport. Each product set

has its specified place in the kit, and the individual products

may be refilled as needed.

The unitor cold repair system covers emergency repairs as

well as permanent repairs on pipes, all types of mechanical

equipment and machine components onboard, including

non-weldable materials.

Unitor's metalgrade, aquagrade and ceramigrade products

are a range of cold-curing metal repair and rebuilding

materials based on the latest polymer resin technology

which is the result of many years of development.

Unitor's rubbergrade products are cold-vulcanising

elastomeric repair materials for use on rubber as well as

metal components.

The products are compatible with all ferrous and non-ferrous

metals as well as most plastics, and have proven themselves

as permanent repairs. They have excellent chemical

resistance and are suitable for permanent immersion in

many environments including sea water, hydrocarbons, oils

and a very wide range of chemical solutions.

The basic range of products is selected in order to provide a

versatile program for onboard applications. The application

areas complement and extend the various welding and

related thermal processes already in use, providing an even

more complete repair system.


All necessary application equipment technical data sheets

and health & safety data sheets included.

Supplied with:

• 1 set Leak-stop II

• 1 set Aquagrade rebuild

• 1 set Metalgrade ready-stick

• 1 set Ceramigrade rebuild

• 1 set Metalgrade express

• 1 set Ceramigrade liner

• 1 set Metalgrade rebuild

• 1 set Rubbergrade 6 rebuild

• 1 set Metalgrade hi-temp

• 1 set Rubbergrade 6 remould

484



LLEEAAK SK STTOOP PP PIPIPE RE REEPPAAIR TIR TAAPPEE

Water activated cold curing product for emergency repairs of leaking pipes

Features

• Can be used for all types of pipes, even most plastic types

• Activated by submerging in water

• Do not produce any heat during curing

• Comes with MSDS, tech sheet, gloves and application tools

Benefits

• No need to consider what base material in pipe consists of

• No need to mix with activator to start curing

• No sparks and spatter that can create a fire or explosion

• No distortion of the base material

• All accessories to do the job available

Special bandages impregnated with a resin system which is

activated by immersion in water. Ideal for repairs to leaking

pipes- simply immerse in water then wrap around the leak.

Leak stop I

1 pc. 2"x4' (50 mm x 1,2 m)

For use on pipe diameter 0–1" (0 mm–25 mm). Product no

630384 / 158g black repair tape in a pouch

Leak stop II

1 pc. 2"x12' (50 mm x 3,6 m)

For use on pipe diameter 1"–2" (25 mm–50 mm). Product no

606006 / 232g black repair tape in a pouch

Leak stop III

1 pc. 4"x12' (100 mm x 3,6 m)

For use on pipe diameter 2"–4" (50 mm–100 mm) Product

no 630392 / 325g black repair tape in a pouch


Supplied with:

• All necessary application equipment technical data

sheets and health & safety data sheets

• 1 pair of gloves



630384 LEAK-STOP PIPE REPAIR I

606006 LEAK-STOP PIPE REPAIR II

630392 LEAK-STOP PIPE REPAIR III

485

MEMETTAALLGGRRAADDE RE REEAADDY SY STTICICK 3 PK 3 PAAIRIRS OS OF SF STTICICKKSS00..772K2KGG

101 659227

Two component putty for emergency repairs of leaking pipes.

Features

• Base and activator as two separate sticks

• Does not produce any heat during curing

• Comes with all necessary application equipment, SDS, technical sheet and gloves

Benefits

• No possibility that product will unintentionally start curing

• No sparks


• All accessories available

Set weight: 0.86 kg

MEMETTAALLGGRRAADDE EE EXXPPRREESSS BS BAASSE AE AND AND ACCTTIVIVAATTOORR00..25L25L

101 659235

A two component extremely fast cold-curing

metal repair compound supplied in base and

activator containers. Used wherever there is an

emergency urgent need to get equipment back

into action. Base & activator providing 0,25 l

rapid repair compound.

Features

• Can be used for most types of base materials

• Extremely fast curing

• Workable deposit


• Comes with all necessary application equipment, SDS, technical sheet, gloves and application tools

Benefits

• No need to consider what base material consists of

• Repairs can be done fast

• Deposit can be machined, drilled or grinded

• No sparks



486



MEMETTAAL GL GRRAADDE RE REEBBUUILILD BD BAASSE AE AND AND ACCTTIVIVAATTOORR00..5L5L

101 659243

Two component normal cold curing metal repair

compound for most metals.

Features




• Comes with all necessary application equipment,

SDS, technical sheet, gloves and application tools

Benefits



• No sparks




Set weight: 1.1 kg

487



MEMETTAAL GL GRRAADDE HI - TE HI - TEEMP HEMP HEAAT RT REESSISISTTAANTNTCCOOMPMPOOUUNDND

101 663427

A one part water based ceramic and stainless compound for high temperature applications

Features

• Can be used for most types of base materials except aluminium

• Inorganic deposit




Benefits


• Temperature resistant up to 100º C dry heat


• No sparks



Set weight 0.42 kg

A ceramic and stainless-filled one part water based paste. It

is temperature resistant up to 100ºC (200ºF). It is used to

seal joints, defects, cracks and voids in cast iron, steel and

stainless steel. 1 tin giving 0,13 l repair compound.

488



AAQQUUAAGGRRAADDE RE REEBBUUILILD BD BAASSE AE AND AND ACCTTIVIVAATTOOR 0R 0..5L5L

101 659250

Two component cold curing metal repair

compound for underwater repair.

Features


• Deposit will cure underwater



• Supplied with all necessary application equipment,


Benefits


• Can be used for underwater applications


• No sparks



Set weight 0.95 kg

489

CCEERRAAMIGMIGRRAADDE RE REEBBUUILILD BD BAASSE AE AND AND ACCTTIVIVAATTOORR00..5L5L

102 659268

Two component cold curing ceramic repair

compound for repair of cavitations and erosion

found in fluid flow environments

Features


• Ceramic bead filler




Benefits

• No need to consider what base material consist of

• Superb for fluid flow environment



Set weight: 1.0 kg

CCEERRAAMIGMIGRRAADDE LE LINEINER BR BAASSE AE AND AND ACCTTIVIVAATTOOR 0R 0..5L5L

102 659276

Two component cold curing ceramic repair fluid

for repair of cavitations and erosion found in

fluid flow environments

Features


• Ceramic bead filler




Benefits


• Superb for fluid flow environment

• Can be applied using a brush



Set weight: 0.92 kg

490



CCEERRAAMIGMIGRRAADDE AE ABBRRAASSHIEHIELLD 5.D 5.4K4KG EG ENGNGINEINEEERRINGINGRREEPPAAIR CIR COOMPMPOOUUNDND

102 725291

Two component cold curing ceramic repair compound with excellent resistance against heavy

abrasion. Specifically meant for dredgers and cement carriers.

Features


• Large ceramic bead in epoxy matrix

• Do not produce any heat during curing


Benefits


• Long lasting coating overlay protection of parts subject to extreme wear



• All accessories to do the job available

Set weight 5.4 kg


Supplied with:

• 5400 g base + activator (3600 g base in a 2 liter tin

plus1800 g activator in a 1 liter tin)

• 1 spatula

• 1 applicator

• All necessary application equipment technical data

sheets and health & safety data sheets

491



RRUUBBBBEERRGGRRAADDE 6 RE 6 REEBBUUILILD 3 X 0D 3 X 0..143L B143L BAASSEE//AACCTTIVIVAATTOORR

103 659284

Two component cold curing vulcanising repair

compound for repair of rubber items or on metal

surfaces.

Features

• Can be used for most types of rubber and metals

• Synthetic rubber compound




Benefits

• No need to consider base material type

• Multi-purpose

• No sparks


Set weight: 0.59 kg

A two component cold-curing vulcanising repair compound.

Provides a strong long term repair on rubber items or on

metallic surfaces. For repairs of hoses, gaskets, electric

cables etc. Set of 3 x 0,143 l Engineering Repair

Compound.

492



RRUUBBBBEERRGGRRAADDE 6 RE 6 REEMOMOUULLD 3 X 0D 3 X 0..143L B143L BAASSEE//AACCTTIVIVAATTOORR

103 659292

Two component cold curing vulcanising repair

fluid for repair of rubber items or on metal

surfaces.

Features

• Can be used for most types of rubber and metals

• Synthetic rubber compound

• Product in fluid state




Benefits

• No need to consider base material

• Multi-purpose

• Can be applied using a brush



• Accessories included

Set weight: 0.59 kg A two component cold-curing vulcanising repair fluid that

can be moulded or painted on to rubber or metallic surfaces.

Set of 3 x 0,143 l Engineering Repair Fluid.

493

�� 14�� !" "# 5" "�� ) "�� (�� %2��& �'�14�&��$�(��)�'*

WSS’s extensive marine chemicals portfolio includes two of the industry’s most trusted and respected brands (Nalfleet and Unitor) and is aligned to meet customer needs and global standards.

The operational, technical and regulatory challenges that today’s fleet managers face are unique and demand tailor-made solutions. With 150 years of experience, a trusted and innovative product range and a dynamic global network, we work in partnership with our customers to ensure that these challenges are met.

Handling marine chemicals has never been easier with our new Active Solutions Portal, a web system for testing, training and chemical monitoring.

�� 14�� !" "# 5" "�� ) "�� (�� %2��& �'�14�&��$�(��)�'�

MARINE CHEMICALS

CLEANING CHEMICALSWATER TREATMENT CHEMICALS

FUEL OIL CHEMICALSTEST KITS AND EQUIPMENT

CLEANING CHEMICALS

As a vital part of every vessel’s routine, cleaning and the use of cleaning chemicals at sea is a task that is becoming highly regulated, with increasingly strict environmental protection requirements. From tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task contributes directly the operating efficiency of the vessel.

WSS’s range of tank cleaning products have been specially formulated and tested to meet current IMO/MARPOL standards to ensure compliance and give ship owners and operators one less thing to worry about.

MAMARRINE CINE CHEHEMICMICAALLSS Unitor Cleaning Chemicals

Cargo Hold Cleaning

AAQQUUAATTUUFFF HIGF HIGH FH FOOAAMM

Aquatuff High Foam is a heavy duty alkaline cleaner with good foaming qualities specially formulated for

cleaning cargo holds on bulk carriers and OBOs.

Features

• Heavy Duty alkaline water based cleaner

• Specially formulated for the cleaning of cargo holds

• Does not contain nonyl phenol ethoxylates or other estrogenic compounds

• Biodegradable

• Free from hydrocarbon solvents

Benefits

• Ideal for cleaning after coal, pet coke and other difficult cargoes

• Effective and economical in use

• Completely safe on epoxy coatings

• Complies with all environmental regulations and the EU Detergent Regulation

The dense foam created prevents the cleaning solution from

running off vertical surfaces and thereby enhances the

cleaning efficiency. It is water based and is safe to the

environment, containing only biodegradable ingredients. It

effectively removes most dry cargoes to “water white

standard”. Aquatuff High Foam is specially developed for

cargo hold cleaning, but may also be used for other cleaning

applications where Aquatuff normally is used but where high

foam is beneficial.





496


Cargo Hold Cleaning

MEMETTAAL BL BRRITITE HDE HD

Liquid detergent compound containing phosphoric acid and non-ionic surfactants, used for rust

removal and as a surface brightener.

Features


• Removes tarnish from non-ferrous metals

• Surface brightening including aluminium

• Removes rust stains from painted, ceramic and wooden surfaces

• Economical in use

Benefits

• Non-flammable

• Removes light rust and rust stains

• Cleans and passivates ferrous metal surfaces, inhibits further corrosion, and gives a base which paint will adhere





497


Cargo Hold Cleaning

SSLLIPIP-C-COOAATT

Slip-Coat is a water based liquid product specially formulated to leave a thin, temporary film on cargo

hold surfaces.

Features

• Water soluble cargo hold barrier – easily removable with water

• Ideal when cleaning after coal, pet coke and other difficult cargoes

• Easy to apply – easy to remove

• Provides temporary protection against corrosion

• Water based – free from hydrocarbon solvents

Benefits

• Complies with all environmental regulations

• Saves cleaning time and cleaning chemicals

• Completely safe on all coatings

• Prevents even the most difficult cargo to adhere to the coating

The film provides a barrier between the cargo and the cargo

hold surfaces making the cleaning operation after unloading

quicker and easier, and optimal cleaning result is achieved.

Slip-Coat is safe to the environment and to the personnel

handling it, and will not contaminant the cargo. It is non-

corrosive and safe on all coatings.





Approvals

• All substances used in Slip Coat comply with FDA

regulation 21 CFR 175.300

498


Cargo Hold Cleaning

SSLLIPIP-C-COOAAT WT WRR

Slip-Coat WR is a liquid, water based product specially formulated to leave a temporary water resistant

film on cargo hold surfaces.

Features

• Water resistant cargo hold barrier - easily removable with an alkaline cleaner

• Ideal when cleaning after humid and corrosive cargoes as sulphur

• Easy to apply - easy to remove

• Provides temporary protection against corrosion

• Water based - free from hydrocarbon solvents

Benefits

• Complies with all environmental regulations

• Saves cleaning time and cleaning chemicals

• Completely safe on all coatings

• Prevents even the most difficult cargo to adhere to the coating

The film provides a barrier between the cargo and the cargo

hold surfaces making the cleaning operation after unloading

quicker and easier, and optimal cleaning result is achieved.

The film is water insoluble thus making it suitable for typically

humid cargoes as sulphur. The cargo hold surfaces are also

protected from corrosion making lime wash unnecessary.

Slip-Coat WR is safe to the environment and to the

personnel handling it, and will not contaminant the cargo. It

is non-corrosive and safe on all coatings.





499


Cleaning and Maintenance

EENVNVIRIROOCCLLEEAANN

Enviroclean is micro emulsion water based cleaner/degreaser that has numerous cleaning applications

including the removal of greases, oil, sludge, polymer compounds, carbon deposits, dirt and grime

Features

• Water based degreaser


• Low-toxic

• As an engine room cleaner it is exceptional as not only can it be used for degreasing, cleaning paint work and carbon

removal, but also for use in soak tanks, ultrasonic tanks and high pressure cleaning equipment

Benefits

• Promotes a pleasant and healthy working environment

• Splits after cleaning, releasing the oil phase for reclamation

This product is low toxic, biodegradable and safe to use. It is

based on natural citrus oil solvent linked with an advanced

surfactant formulation. The main applications are for

cleaning and degreasing in the engine room and for deck for

removal of grease, oil, sludge, polymer compounds, carbon

deposits, dirt and grime.





500



CCOOLLDDWWAASSH HDH HD

Coldwash HD is a heavy duty degreaser based on petroleum solvents, emulsifying agents and

surfactants. This product is excellent for use on soiled surfaces, bilges and machinery parts.

Features

• The emulsifying agents in this product are biologically degradable


• Effective on mineral oils and petroleum based residues

• Safe to use on most metal surfaces and painted surfaces

• Removes oil contamination from machinery, engine parts and bilges

• Soak cleaning of machinery parts

Benefits

• Easy to recover as it splits after cleaning, releasing the oil phase

• Powerful degreaser with quick penetration and good emulsifying properties

• Rapid rinsing, leaves clean and oil-free surfaces

Splits after cleaning, releasing the oil phase for reclamation.

A powerful degreaser with quick penetration and good

emulsifying properties. The emulsifying agents in this product

are biological degradable. Does not contain nonyl phenol

ethoxylates or other estrogenic compounds. Effective on

mineral oils and petroleum based residues. Safe to use on

most metal surfaces and painted surfaces. Removes oil

contamination from machinery, engine parts and bilges.

Soak cleaning of machinery parts. Rapid rinsing, leaves

clean and oil-free surfaces.


Product number Product name Quantity

571430 COLDWASH HD 25 LTR 25 L

571455 COLDWASH HD 210 LTR 210 L

501



CCLLEEAANBNBRREEAAKK

Cleanbreak is a degreaser containing self-splitting emulsifiers. It allows the slop water to break into

separate oil and water phases.

Features

• Highly effective, economical solvent cleaner


• Reduces disposal costs and associated problems

• Low toxicity, non corrosive

Benefits

• Rapid penetration

• Slop emulsions break into two distinct phases

• Allows oil residues to be reclaimed

Cleanbreak is solvent based. Used for general cleaning of

machinery spaces, bulkheads, decks, tank tops and any oil/

grease soiled areas. Should be used where slops are

required to pass through oily water separators to meet

current IMO regulations



571497 CLEANBREAK 25 LTR

571505 CLEANBREAK 210 LTR

502



SSEEAACCLLEEAANN

652 571406

Seaclean is a highly concentrated cleaner based on petroleum solvents, emulsifying agents and

surfactants. It is formulated for cleaning double bottom, deep and wing tanks etc., used for fuel oils.

Features

• The emulsifying agents in this product are biological degradable

• Does not contain nonylphenol ethoxylates or other estrogenic compounds

• Can be used for general removal of oil and grease from soiled surfaces

Benefits

• Highly concentrated cleaner with quick penetration and emulsifying properties

• Economical - very low dosage rates



571406 SEACLEAN 25 LTR

503



SSEEAACCAARRE OE O..SS..DD

Seacare Oil Spill Dispersant is a biodegradable hydrocarbon based product with high dispersing

efficiency and low toxicity. It is approved as a Type I dispersant according to LR448 specifications by

the Department for Environment, Food & Rural Affairs (DEFRA) (formerly the U.K. Ministry of Agriculture,

Fisheries and Food (MAFF)).

Features

• Approved Type I dispersant according to the latest LR448 specifications of AEA Technology Plc. covering both

efficiency and toxicity for use in dispersing oil on sea,beaches and rocks

• Ready to use product

• For use on oil spills that may occur during loading or discharging of cargo or bunkers where allowed

• For cleaning of spills on deck, ships side, piers, wharfs, etc. where allowed

Benefits

• Raised standards for operator safety in handling and use, being biodegradable and having low toxicity and a high

flash point

• Rapid efficient dispersal of a wide range of oil residues. Converts hydrocarbons into very fine emulsions

• Disperses mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils

The definition for a Type I dispersant is that it is a

conventional hydrocarbon-base - for use primarily undiluted

on beaches, but may also be used undiluted from WSL

spray sets using breaker boards or other suitable means of

application and agitation.



571562 SEACARE OSD 25 LTR

571570 SEACARE OSD 210 LTR

Approvals

• Approved as a Type I dispersant according to LR448

specifications by the Department for Environment,

Food & Rural Affairs (DEFRA) former the U.K. Ministry

of Agriculture, Fisheries and Food (MAFF).

• DEFRA / MAFF-approval Reference No. MAFF/FEPA

90/98. SOAEFD-approval Reference No. FEP/DISP/

2001/6.

504



SSEEAACCAARRE EE ECCOOSSPPEERRSSE 5E 522

Seacare Ecosperse 52 is a concentrated oil spill dispersant which is highly efficient for use on a wide

range of oils.

Features

Used as a dispersant:

• High dispersion efficiency product

• Accelerates natural biodegradation of dispersed hydrocarbons

• Helps prevent crude oil from ending up on shore

• Simple, quick and efficient

• Efficient dispersion of wide range of oils in a broad range of temperatures, salinity, and concentrations.

Used as cleaning agent:

• High efficiency for cleaning hydrocarbons (oils and other related products)

• For cleaning of hydrocarbons spills on deck, ships side, piers, wharfs, etc., where allowed

• Cleaning up after spills that may occur during loading of bunkers where allowed

Benefits

• Multi-purpose product: economical, safe, efficient

• Low stocks required compared to Type I products

• High standards in operator safety in handling and uses



769653 SEACARE ECOSPERSE 52 25 LTR

769661 SEACARE ECOSPERSE 52 210 LTR

Approvals

• Approved by DEFRA (UK) as a Type II/III dispersant

according to the LR448 Specifications of AEA

Technology Plc. for dispersion efficiency and the

"Fisheries research Technical Report N° 102"

covering the toxicity for use in dispersion of oil on

sea, beaches and rocks. Reference No. MAFF/FEPA

129/2001. Type II and Type III dispersant

• SOAEFD. Scottish Office Agriculture, Environment

and Fisheries Department. Reference No. FEP/DISP/

2001/7

• Registered by the US EPA National Contingency Plan

(Federal Register, Subpart J - Use of Dispersants and

Other Chemicals)

505



AACCC PC PLLUUSS

651 698704

ACC Plus is a powerful cleaning agent for cleaning of diesel engine air coolers, scavenging air systems

and the compressor side of turbochargers. It is formulated to remove oil, grease and carbon deposits.

Features

• Meets the latest environmental standards and has low toxicity, low evaporation and a pleasant smell

• Leaves no residue and has no harmful effect on engine

• Can be used for handspray cleaning while diesel engine is stationary

• Ideal for use in soak bath or cleaning tanks, such as the Chemical Cleaning Unit and the Ultrasonic Bath

Benefits

• Efficient and economical

• Maintains, stabilises and maximises air cooler efficiency

ACC Plus is a microemulsion type cleaner, where a

synergistic blend of biodegradable surfactants and low

toxicity solvents replace the use of the harmful solvents

traditionally used in air cooler cleaners without reducing the

cleaning performance. It is formulated to meet the latest

environmental standards, and is non toxic both to the

environment and to persons handling it. ACC Plus contains

no chlorinated or aromatic hydrocarbon solvents, no

nylphenol ethoxylates or other substances harmful to the

environment.



698704 ACC PLUS 25 LTR

506



AAIR CIR COOOOLLEER CR CLLEEAANENERR

651 571588

Air Cooler Cleaner is a powerful solvent emulsion cleaner for the cleaning of diesel engine air coolers,

scavenging air systems and compressor sides of turbochargers. It is formulated to remove oil, grease

and carbon deposits.

Features

• May be used for in-service cleaning

• Leaves no residue and has no harmful effect on engine

• Can be used for light carbon removal from machinery parts

Benefits

• Efficient and economical, saves time and avoids risks of damage when dismantling

• Renders surfaces oil-repellent

• Maintains and stabilises air cooler efficiency at maximum

• Product in water solution is non-flammable, non-explosive and has no flash point



571588 AIR COOLER CLEANER 25 LTR

507



CCAARRBBOONCNCLLEEAAN LN LTT

651 575696

Carbonclean LT is a non-corrosive, quick, powerful solvent for removal of carbonaceous deposits. Can

be used for removal of carbon type deposits from burner tips, fuel injectors and all components fouled

by carbon, resin or varnishes. Cleans oil side of fuel and lube-oil heaters, oil coolers, etc.

Features

• Reformulated with improved cleaning properties

• Can be used for cleaning engine parts including, but not limited to pistons, piston rings, valves and valve cages

• Non-corrosive, safe on all light metals, including aluminium

• Low toxicity, no phenolic or chlorinated compounds


• Low evaporation rate

Benefits

• Simple and economical to use by soaking or circulation method

• Eliminates need for hard scraping




CCAARRBBOON RN REEMOMOVVEERR

651 571604

A powerful non-corrosive solvent for breaking down carbon deposits from burner tips, fuel injectors and

all components fouled by carbon, resin or varnishes

Features

• Cleans oil side of fuel heaters, oil coolers, etc.

• Can be used for cleaning of: pistons, piston rings, valve cages

Benefits

• Simple and economical to use

• Non flammable

• Eliminates need for hard scraping



571604 CARBON REMOVER 25 LTR

508



DDEESSCCAALLEEXX

651 571646

Descalex is a dry acid cleaner formulated to remove rust and scale deposits.

Features

• Dry acid cleaner contains inhibitors to protect metals

• Fast and effective scale remover

• Removes scale from boilers

• Removes scale from diesel engine cooling water systems

• Removes scale and rust from condensers, evaporators, heat exchangers etc.

Benefits

• Efficient, economical, safe

• Contains colour indicator to show the strength of the solution and anti-foam agent

• Safe and easy handling and storage

Unitor has developed a 210 litres capacity cleaning unit

designed among other for use with chemical acid solutions

for cleaning boilers, calorifiers, heat exchangers and other

types of equipment where rust and scale form.



571646 DESCALEX 25 KG

Accessories


737189 CHEM. CLEAN. UNIT W/HEATING, COATED

509



DDEESSCCAALLING LING LIQIQUUIDID

651 571653

Descaling Liquid is a liquid acid containing descaling accelerators, corrosion-inhibitors and wetting

agents. Descaling Liquid removes scale and rust from condensers, evaporators, heat exchangers, etc.

Features

• Acid based product contains inhibitors against attack on ferrous metals

• Easy to rinse off

• Removes water scale from boilers

Benefits

• Fast and effective scale remover

• Unlimited shelf life

Unitor has developed a 210 litres capacity cleaning unit

designed among other for use with chemical acid solutions

for cleaning boilers, calorifiers, heat exchangers and other

types of equipment where rust and scale form.




Accessories



510

MEMETTAAL BL BRRITITEE

651 571661

Liquid detergent compound containing rust dissolving acids, emulsifiers and passivators and it is used

for rust removal and as a surface brightener.

Features


• When cleaning aluminium, brass and copper, flush with water upon completion of cleaning

Benefits

• Prevents flash rusting

• Surfaces rendered suitable for painting

• Non-flammable




DDISISCCLLEEAANN

651 571687

Disclean is a water based blend of inhibited acids, surfactants and emulsifying agents. Disclean

removes the heavy tenacious deposits which collects in fuel and lube oil centrifugal separators, and it is

extremely effective in removing these deposits without the necessity of separating the discs from the

stack.

Features


• Non-flammable

• Cleans down to metal surfaces, leaves no film or residue

• Cleans all types of separator discs

Benefits

• Reduces down time

• Allows cleaning of disc without dismantling of disc stacks

It is recommended that this product is not used on zinc, tin,

galvanised surfaces or anodised aluminium.

The Unitor Chemical Cleaning Unit (Product no. 664

737189) can be used for soak cleaning of disc stacks.



571687 DISCLEAN 25 LTR

511



DDEECCK CK CLLEEAAN NPN NP

651 765990

Deck Clean NP is a non-flammable liquid cleaning formulation containing acids, emulsifiers and

passivators used for removal of rust and waterborne stains on super structure and on decks and

windows.

Features

• Removes light rust and rust stains from painted and wooden surfaces, metals and glass

• Does not contain nonylphenol ethoxylates or other estrogenic compounds, phosphoric acid free and is readily

biodegradable

Benefits

• Highly concentrated

• Easy to rinse off



765990 DECK CLEAN NP 25 LTR

TTEEAAK RK REENENEWWEERR

651 758623

Teak Renewer is a dry acid product formulated for brightening wooden decks. For removal of oil and fat

and for daily cleaning use Aquabreak PX or HP-Wash.

Features

• Dry acid deck cleaner

• Surface brightening of wood, removes stains and discolouration

Benefits

• Quick, efficient cleaning power

• Water soluble for ease of use



758623 TEAK RENEWER 20 KG

512



AAQQUUAATTUUFFFF

Aquatuff is a heavy-duty water based alkaline cleaner. Aquatuff has numerous cleaning applications

including removal of grease, vegetable and animal oil, soot, general dirt and grime.

Features

• Heavy duty water based cleaner


• Biodegradable


• Aquatuff is most suitable for removal of wax deposits

• Removal of soot deposits from inert gas systems

• Ideal for cleaning after coal and pet coke

Benefits


• Completely safe on epoxy coatings

It has numerous cleaning applications including removal of

greases, waxes, vegetable and animal oils, sludge, soot,

carbon deposits, dirt and grime. Aquatuff is also used for

cargo hold cleaning after coal and pet coke.


Aquatuff can be applied on vertical surfaces by adding

Unitor Foam-Agent for increased resident time.


607826 AQUATUFF 25 LTR

607827 AQUATUFF 210 LTR

Accessories


614537 FOAM - AGENT 3X5 LTR

513



AAQQUUAABBRREEAAK PK PXX

Aquabreak PX is a multipurpose waterbased cleaning and degreasing agent. The surfactant formulation

with complex binders has a good cleaning efficiency. Dirt and oily matter is effectively removed without

the use of solvents and caustic based cleaners.

Features

• Low toxic and non caustic (does not contain nonyl phenol ethoxylates or other estrogenic compounds)

• Biodegradable

• Non-flammable


Benefits

• Very effective and economical in use

• Safe on all materials

Aquabreak PX has numerous general cleaning applications

including the removal of grease, oil, sludge, carbon deposits

and grime. Can be used as engine room cleaner but also

suitable for cargo tank cleaning, it s good for use in galleys

and on decks and suitable for cleaning of soiled textiles such

as rugs, covers, mats, overalls etc. Effectively cleans

fiberglass boats. IMO approved and listed in Annex 10 of the

MEPC.2/Circular


Aquabreak PX can be applied on vertical surfaces by adding

Unitor Foam-Agent for increased resident time.





Accessories



514

FFOOAAM-AM-AGGEENTNT

651 614537

Foam-Agent is a water based non-flammable product. When using this foam additive, the cleaning

efficiency of the cleaning chemicals will be enhanced. It will also be a more economical use of the

cleaning chemicals.

Features

• Biodegradable


Benefits

• Suitable for use with our water based alkaline cleaning chemicals

• Prevents the chemicals from running off vertical surfaces, and increases the resident time




MUMULLTTI CI CLLEEAANN

651 777708

Multi Clean is an alkaline mixture of water, natural citrus solvent and a synergistic blend of synthetic

surfactants. Multi Clean can be used for general cleaning of accommodation areas, floor plates and

engine room cleaning and has a pleasant citrus odour.

Features

• Versatile- can be used for general cleaning

• Non-flammable, non-toxic - Ingredients are all biodegradable

Benefits

• Highly effective concentrated cleaner

• Environmentally adapted

Multiclean is formulated to meet the latest MARPOL

regulations and does not contain any chlorinated solvents

and less than 10 % aromatics. Also, with respect to

European PARCOM regulations the product does not

contain any Alkyl Phenol Ethoxylates. The ingredients of

Multiclean are fully biodegradable.



777708 MULTI CLEAN 25 LTR

515



RREEEEFFEER CR CLLEEAANENERR

Reefer Cleaner is a combination of a highly effective alkaline cleaners and disinfectant in one product. It

is biodegradable and is effective against both gram negative and gram positive bacterias, fungi, mould,

algae and mildew.

Features

• Water based alkaline cleaner and disinfectant

• Safe to use on all types of surfaces including aluminium and plastic

Benefits

• High tolerance in hard water

• Does not build up any resistance

• Cleans and disinfects in one operation and removes bad odours

Reefer Cleaner is used for cleaning and disinfection of reefer

cargo holds and storage spaces, deep freezers, galleys and

other food areas. It removes fat, grease and general dirt,

leaving a clean surface, free from bacteria and other micro-

organisms. Effective against viruses, bacteria, algae, fungi

and other micro-organisms.



661827 REEFER CLEANER 25 LTR

623983 REEFER CLEANER 20 LTR BIB

516



FFOORRE & AE & AFFTT

651 571554

Fore & Aft is a biodegradable, non-flammable cleaner containing surfactants and alkaline materials.

Suitable for cleaning accommodation and galley areas.

Features

• Does not contain nonyl phenol ethoxylates or other

estrogenic compounds, non-caustic , phosphate free

• Acceptable for use in the food storage areas

• Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc

• Can be used on windows and port holes

Benefits




571554 FORE AND AFT 25 LTR

517



H.H.PP. W. WAASSHH

651 571729

H.P. Wash is an alkaline cleaner with detergents and surfactants which quickly dissolve grease and dirt

deposits. H.P. Wash is designed for use with high pressure cleaning machines such as Unitor High

Pressure Cleaners. It's suitable for most painted surfaces and dries leaving a good shine.

Features



• Biodegradable cleaner

• Non-flammable

• Low dose rates 0.5–5%

• Leaves a good shine on hard surfaces after cleaning

• H.P. Wash is suitable for hot or cold high pressure spray equipment

• Can be used for general cleaning in the engine room, outside paint work and on the deck

• Can be used on Ro/Ro vessel car decks, for removal of traffic film

• Can be used for cleaning of fish holds and process machinery onboard factory vessels

• Phosphate free

Benefits

• Formulated for use with H.P. cleaning machines

• Rapid dispersal of a large range of oils and greases

• Leaves a good shine on hard surfaces after cleaning



571729 HP WASH 25 LTR

518



UUNI-WNI-WAASSHH

651 571745

Uni-Wash is a liquid detergent with good foaming qualities. Uni-Wash is suitable for accommodation

cleaning of woodwork, leather, desks, cleaning of toilets and showers etc.

Features


• Non-flammable

• Pleasant smell

• Leaves surfaces residue free

Benefits

• Acceptable for use in food areas

• Can be used for cleaning of dishes, windows and port holes

It contains wetting agents that allow rapid penetration to

remove fat, oil, grease or grime. Uni-Wash is pH-neutral and

suitable for cleaning accommodation areas.



571745 UNIWASH 25 LTR

519



UULLTTRRA SA SOONIC CNIC CLLEEAANENER UR USSCC

651 607819

Unitor USC is a water-based alkaline low-toxic product with an exceptional solvency power on soil and

oily matter.

Features

• Water-based

• Low-toxic

• Biodegradable

• Non-flammable

• Free of hydrocarbon solvents

• Self splitting

Benefits

• Specially developed for use with ultrasonic cleaning baths

• Removes grease, oil, carbon deposits, soil and grime

• Keeps loosened deposits in suspension preventing re-deposition


Ultra Sonic Cleaner USC is specially developed for ultrasonic

cleaning applications. It is free from hydrocarbon solvents,

biodegradable, and safe to handle.




520



NANATTUURRAAL HAL HAND CND CLLEEAANENERR

651 571752

Natural Hand Cleaner is an orange gel skin cleaner containing natural ingredients such as citrus oils.

Features


• Pleasant citrus smell

• Effective and suitable for the most severe soiling

• Easier to rinse off than many other gel cleaners

Benefits

• Mild antiseptic properties. Due to its mildness it can be used safely day after day.

• Contains poly beads which act like a light scrubbing brush to assist the cleaning action. The poly beads are harmless

to bilge pumps.

The product is effective, mild to the skin and contains no

petroleum solvent derivatives. It removes the most severe

industrial grime, oil and grease in complete safety.



571752 NATURAL HANDCLEANER 4X5 LTR

521



CCAARRPPEET CT CLLEEAANENERR

651 659409

Carpet Cleaner is a soil extraction cleaner for use on a wide range of carpets. Low foaming with a

unique surfactant system that leaves no residue that contributes to resoiling.

Features

• Low foaming detergents

• Biodegradable

• Safe to use no special handling requirements

• Free of colourants

Benefits

• Compatible with all known carpet cleaning machines

• Leaves no sticky residue that contributes to resoiling

• Leaves a fresh odor



659409 CARPET CLEANER 12X1 LTR

522



UULLTTRRAACCIPIP

651 770727

Ultra CIP is a multi-purpose product that can handle several different applications as well as solve and

clean complex contaminations. UltraCIP can be used in Cleaning In Place applications.

Features

• Non-flammable.


• Removes heavy tenacious deposits

• The product is self splitting

Benefits

• Cleans down to metal surfaces and leaves no film or residue

• Reduces down time as it allows cleaning of discs without dismantling the separator

It removes deposits like coked oil, oil mixed with hard

deposits like rust and lime. Ultra CIP can also remove

deposits from glycol and similar products. The product is

readily biodegradable.



770727 UNITOR ULTRACIP 25 LTR

523



CCOOMMISMMISSSIOIONING CNING CLLEEAANENERR

651 624932

Commissioning Cleaner is a multifunctional water based cleaner. Commissioning Cleaner can be used

for cleaning of new systems for mill scale, rust, oil etc. it also cleans water systems with light scale and

a thin oil film.

Features

• Biodegradable


• Safe on aluminium, zinc, tin and their alloys

• Quick separation of oil after cleaning

Benefits

• Provides a temporary protection against corrosion by passivation

• No need of neutralization chemicals afterwards

It is the new generation in one step cleaner products.

Commissioning Cleaner is for cleaning of new boilers and

cooling systems on board new buildings. It will remove

scale, rust, oil and grease at the same time from the

systems. The product is recirculated through the system,

using an external circulation pump.



624932 COMMISSIONING CLEANER 25 LTR

524



BBILILGGE WE WAATTEER FR FLLOOCCCCUULLAANTNT

651 690669

Bilge Water Flocculant is a very effective liquid treatment based on Poly Aluminium Chloride (PAC) to

separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.

Features

• Iron-free, completely safe to the environment

• Acts by both breaking the oil-in-water emulsion and by building flocs

• Remaining oil sludge can be burned onboard or pumped ashore-contains very little water

• Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals

Benefits

• Low dosage, economical use

• Cost-effective bilge water treatment based on specially selected Poly Aluminium Chloride

• Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil

International environmental regulations set strict rules as to

the oil content in effluent water from ships. To meet these

regulations, a combination of mechanical and chemical

cleaning is necessary. Bilge Water Flocculant is used in

combination with multistage bilge water cleaning systems

that include mechanical separation of free oil, emulsion

breaking, flocculation and filtration. After dosing, Bilge Water

Flocculant breaks the oil-in-water emulsion created by

contaminants in lubricating and fuel oils, emulsifying cleaning

agents etc. It then destabilizes the remaining small oil

droplets and agglomerates them into larger particles (flocs)

that are easily collected by filtering.



690669 BILGEWATER FLOCCULANT 25 LTR

525



DDEEFFOOAAMEMER CR COONCNCEENTNTRRAATTEE

Defoamer Concentrate is a non-silicone based water dispersible, liquid defoamer. It controls foaming in

sewage and waste water systems, and it is stable in alkaline conditions. Defoamer Concentrate can be

used to remove foam in water based systems and collecting tanks in vacuum toilet systems.

Features

• Non-silicone defoamer

• Stable in alkaline conditions

• Can be used in sewage and waste water systems

Benefits

• Outstanding for all atmospheric, pressurised and continuous waste equipment

• Excellent to control foaming and remove foam when necessary



661843 DEFOAMER CONCENTR. 25 LTR

624314 DEFOAMER CONCENTR. 20 LTR BIB

526



PPEENENETTRROON PN PLLUUSS

651 575506

Penetron Plus is a fast acting liquid compound containing special oils and solvents that penetrate iron

oxides and loosens carbon deposits. Penetron Plus loosens corroded parts as nuts, bolts, etc.

Features

• Liquid oil based product

• Low-toxic, emits no toxic fumes or vapours

• Fast acting penetration of rusty seized up parts

• Keeps tools clean and rust free

• Cleaning of rusty and soiled metal parts

• Protection of machinery parts and tools

Benefits

• Helps to avoid cutting or burning off bolts from engines or machinery

• Dismantling of assemblies seized up from rust and soiling



575506 PENETRON PLUS 12 X 0.5 LTR

527



EELLEECCTTRROOSSOOLLVV-E-E

651 604389

A non-chlorinated solvent with a controlled evaporation rate for cleaning and degreasing electrical

equipment.

Features

• Powerful solvent with controlled evaporation

• Rapid penetration and action

• Efficient cleaning with no grease film or moisture residue

Benefits

• Harmless to electrical insulation- tested for breakthrough voltage after DIN-57370 to 209 KV/cm

• Non-corrosive - can be used on all normal components with no risk of corrosive damage

• Cleans and degreases electrical parts and equipment without the need for rinsing



604389 ELECTROSOLV - E 25 LTR

MUMUD & SD & SILILT RT REEMOMOVVEERR

652 635326

Mud & Silt Remover is a liquid compound. It keeps mud in suspension and cleans fouled systems

completely. Mud & Silt Remover removes sediments, silt and mud from ballast tanks, cooling water

systems, pipelines, etc.

Features

• No acids, alkali or solvent

• Biodegradable

• Non-toxic and non-flammable

• Inject in small quantities into the ballast or cooling water system to be cleaned

Benefits


• Keeps mud in suspension and cleans fouled systems




528


Tank Cleaning

SSEEAACCLLEEAAN PN PLLUUSS

Seaclean Plus is a modern low-toxic, biodegradable solvent based product. It meets IMO’s

requirements regarding safety and pollution hazards of chemicals. This product is excellent as a tank

cleaner and degreaser.

Features

• The emulsifying agents in this product are biodegradable


• Can be used for cleaning and gas-freeing of double bottom, deep, and fuel oil tanks at sea

• Can also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks

• Can be used for degreasing and cleaning of bilge spaces and engine rooms

• Safe to use on most metal surfaces, painted surfaces and tank coatings

Benefits

• Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties

• Easy rinse off, leaving clean and oil-free surfaces

• Economical, very low dosage rates

• Versatile, can be used for a wide range of applications

• Easy to use by any conventional means



654715 SEACLEAN PLUS 25 LTR

654723 SEACLEAN PLUS 210 LTR

Approvals

• IMO approved and listed in Annex 10 of the MEPC.2/

Circular

529


Tank Cleaning

AALLKKLLEEEEN LN LIQIQUUIDID

Alkleen Liquid is a heavy duty water based alkaline tank cleaner, containing natural based detergents.

For zinc silicate coatings use Alkleen Safety Liquid.

Features


• Powerful alkaline tank cleaner containing detergents

• Non-flammable

• Non-corrosive to ferrous metals and epoxy coatings

• Rapid rinsing

• Removes hardened oxidised oil and grease deposits

• Can also be used as final treatment for cleaning tank from black to white or grain

• Can be used for hydrocarbon freeing of cargo tanks

Benefits

• The emulsifying agents are biodegradable

• Rapid penetration and emulsification of vegetable, animal and fish oils

• Used as heavy duty cargo tank cleaner following discharge of drying, semi-drying and non-drying natural oils and

fats

Alkleen Liquid is a powerful cleaner for cleaning of cargo

tanks after discharge of drying, semi-drying and non-drying

natural oils and fats. Alkleen Liquid can be used for tank

sanitising and deodorising prior to changing to foodstuffs. To

achieve the high standard of cleanliness required, a final

wash will be necessary by using this product.



756255 ALKLEEN LIQUID 210 LTR

756254 ALKLEEN LIQUID 25 LTR

Approvals


Circular.

530


Tank Cleaning

AALLKKLLEEEEN SN SAAFFEETTY LY LIQIQUUIDID

Non-caustic water based alkaline cleaner, containing corrosion inhibitors to prevent the corrosion of

metals such as zinc, aluminium, copper, brass and tin. Alkleen Safety Liquid minimises the hazards in

handling caustic based materials.

Features

• Non-caustic

• Non-flammable


• Non-corrosive to ferrous metals

Benefits

• Safe, meets current regulation

• Suitable for all tank-coatings

• Can be used for gas and hydrocarbon-freeing of tanks

• Can be used for deodorizing



571521 ALKLEEN SAFETY LIQ 210 LTR

571513 ALKLEEN SAFETY LIQ 25 LTR

Approvals


Circular

531

TTAANKNKLLEEEEN AN ADDVVAANCNCEE

652 571489

Tankleen Advance is a microemulsion water based tank cleaner. Main application is for hydrocarbon

freeing but can also be used for other tank cleaning purposes where strong degreasing effect is

required.

Features

• Water-based degreaser


Benefits

• Splits after cleaning, releasing the oil phase for reclamation

• Low toxic and safe to use, contains natural solvents linked with easily biodegradable surfactants.



571489 TANKLEEN ADVANCE 210 LTR

Approvals


Circular

TTAANKNKLLEEEEN BN BRRIGIGHTHT

652 766097

Tankleen Bright is formulated for effective removal of white residues from epoxy-coatings remaining

after carriage of fatty acids as well as stains removal and to upgrade coated cargo tanks.

Features

• Solvent-free, non-flammable


Benefits

• Concentrated product, economical in use

• Odourless



766097 TANKLEEN BRIGHT 190 LTR

Approvals


Circular

532


Tank Cleaning

UUNIPNIPOOLL

Unipol is a pH-neutral, liquid concentrated detergent with good cleaning qualities. Unipol can be used

for gas and hydrocarbon-freeing of tanks and can also be used for deodorizing of tanks.

Features

• Non-caustic, pH neutral

• Solvent free

• Non-flammable


• Non-corrosive to metals

Benefits

• Suitable for all tank-coating

• Complies with all environmental regulations and the EU Detergent Regulation

It contains effective but mild and environmentally safe

wetting agents and surfactants that allow rapid penetration

to remove fats and oils. Unipol is especially suitable for

hydrocarbon freeing of tanks, and is safe on all tank coatings

including zinc silicate.



736983 UNIPOL 210 LTR

736975 UNIPOL 25 LTR

Approvals


Circular

533


Tank Cleaning

ZZINC CINC COOAAT CT COONDNDITITIOIONENERR

Zinc Coat Conditioner is a clear organic liquid based on acetates. Zinc Coat Conditioner cleans and

upgrades coated cargo tanks after leaded gasoline, carbon tetrachloride, methylene chloride and virgin

naphtha.

Features

• Organic based liquid cleaner

• Biodegradable


Benefits

• Removal of white deposits (metallic salts) from tank coatings

• Cost effective in use

Zinc Coat Conditioner cleans and upgrades coated cargo

tanks that have contained leaded gasoline, carbon

tetrachloride, methylene chloride or virgin naphtha. It is a

cost effective way to remove lead, chloride, zinc, salts and

iron sulphite from the pores of zinc silicate and epoxy

coatings.



661801 ZINC COAT CONDITIONER 25 LTR

625558 ZINC COAT CONDITION 210 LTR

Approvals


Circular

534


Gamazyme Cleaners

GGAAMAMAZZYYME 7ME 700F00FNN

656 571711

Gamazyme 700FN is a concentrated biologically active powder formulation containing a blend of

patented bacterial strains, specifically developed to deal with sewage wastes. Gamazyme 700FN is

formulated to degrade excess residual waste products in shipboard sanitation pipe work systems,

holding tanks and marine sewage treatment plants. The specialised strains in Gamazyme 700FN will

digest grease, fats, sewage, starch and other organic compounds.

Features

• Powder formulation for easy use

• Biodegradable

• Reactivates biological activity in systems which have been rendered inactive by overloading, washout or use of

aggressive cleaning products

• Eliminates the need for hazardous chemicals

• Cost-effective, saves time, money and manpower

Benefits

• Eliminates the odours associated with sanitary systems which are overloaded or blocked

• Cleans sewage holding tanks without the need for manual entry

• Clears pipes and systems blocked by organic waste matter

• Clears organic materials in slow draining pipes and scuppers

• Restarts septic sewage treatment plant

• Keeps complete sanitary systems in optimum operational condition

The degradation of paper, protein and waste product

residuals is greatly increased, and the odours that these

produce, are reduced.

The bacteria in Gamazyme 700FN will colonise the waste

organic material which lines the pipework/tank system and

degrade the waste until the system is clean. The biological

activity in the marine sewage treatment plant is greatly

increased, so the plant can thus handle more waste. The

obnoxious smells in toilet areas and scuppers, normally

associated with overloaded or blocked systems, are

reduced.



571711 GAMAZYME 700FN 12KG

535


Gamazyme Cleaners

GGAAMAMAZZYYME MSME MSCC

656 587618

Gamazyme MSC is a unique biologically active liquid formulation containing specialised bacterial strains

and biodegradable chemical cleaners. Gamazyme MSC is effective in cleaning or removing organic

residues from hard and soft surfaces, such as urine, dog faeces, food, milk, chocolate syrup, tomato

sauce, etc.

Features

• Unique liquid biological formulation for easy use

• Biodegradable

• A unique technology to remove odours on surfaces and especially on carpets

• Safe, no special handling requirements

Benefits

• Replaces harsh cleaners which often require haz-chem labelling and may be hazardous to the user and the

environment

• Spot cleaning of carpets, drapes, laundry

• Cleans sinks, showers, decks, tiles and bathrooms

• Removes obnoxious odours from drains and scuppers

On soft surfaces such as carpet, Gamazyme MSC is

formulated to spot clean and deodorise the surface by

digesting organic substances over time.

Three way action:

• Chemical cleaning action by removing solids from

surfaces.

• Immediate odour control by fragrance masking.

• Deep cleaning from biological action for removal of

residual organic.



587618 GAMAZYME MSC 12X1 LTR

536


Gamazyme Cleaners

GGAAMAMAZZYYME BME BTTCC

656 589945

Gamazyme BTC is a unique biological active liquid formulation containing specialised bacterial strains,

biodegradable low foaming chemical cleaners and anti-foam agents. Gamazyme Biological Toilet

Cleaner is specifically formulated to replace aggressive, toxic toilet cleaners that can disable the

sewage treatment plant by killing the naturally occurring bacteria which are essential to its operation.

Features

• Biodegradable

• Suitable for use in all marine sanitary and sewage treatment systems

• Safe, no special handling requirements

• Replaces conventional cleaners potentially harmful to the biological sewage system

Benefits

• Cleans toilets, sinks, showers, etc.

• Digests faeces, grease, fat, starch and other solid waste materials

• Removes obnoxious odours from the sanitary system

• Easy to use

Conventional toilet cleaners may also cause foaming in the

vacuum inductor which destroys the vacuum in the sanitary

flushing system.

Gamazyme BTC effectively cleans the toilets, dosing millions

of selected safe bacteria into the sanitary system. These

powerful specialised bacteria colonise the organic waste

lining the pipe system and remove the organic deposit. On

draining to the sewage treatment plant, the bacteria will

enhance the biological activity, reducing solids and odours.

Grease, fats, starch and other organic compounds are

digested by Gamazyme BTC. The degradation of paper,

protein, waste product residuals and other odorous

materials is also enhanced.

Gamazyme BTC cleans more thoroughly and deeply

compared to conventional cleaning products. The use of

cleaning products containing hazardous chemicals such as

acids, caustics, bleaches, disinfectants, etc., can be

reduced.



589945 GAMAZYME BTC 12 X 1 LTR

537


Gamazyme Cleaners

GGAAMAMAZZYYME TME TDDSS

656 743146

Gamazyme Toilet Descaler is used for descaling toilet bowls, toilet systems, drains and pipes.

Features

• Biological powder descaler

• Formulation based on weak acids, bacterial strains and enzymes

Benefits

• Removes uric acid and deposits

• Descales both inorganic and organic material

• Immediate action due to its chemical composition

• Digests fat, grease, and oil in toilets, drains and pipes

• Descales toilet bowls, toilet systems, drain and pipes

• Leaves a fresh smell

Gamazyme Toilet Descaler is based on weak acids, bacterial

strains and enzymes formulated to dissolve organic

materials, uric acid and scale. It is packed in 50 gram water

soluble sachets. Acts immediately due to its chemical

composition. Secondary action due to its micro-organisms

capable of digesting fat, grease and oil found in toilets,

drains and pipes. No need for dismantling of drains and

pipes when used either on a preventative or on a regular

service basis.



743146 GAMAZYME TDS 5 KG BLUE SACH W/MINT

538


Gamazyme Cleaners

GGAAMAMAZZYYME DME DIGIGEESSTTOORR

656 624015

Gamazyme Digestor is a patented formulation containing a synergetic blend of highly specialised

bacteria. The mix of micro-organisms in this product increases organic degradation performance.

Gamazyme Digestor’s biochemical formulation is designed to provide exceptional performance in

clogged drain lines, grease traps and floor drains. It restores slow running drains and reduces odours

due to organic build-up

Features

• Water based biological drain cleaner for slow running drains

• Patented, environmentally friendly bioenzymatic formulation designed to restore flow in drain systems containing

greasy deposits

• Results in increased bacterial activity in a variety of organic wastes

• Environmentally adapted

Benefits

• Free of harsh chemical compounds normally associated with acid and caustic drain openers

• Provides penetration, breakdown and degradation of organic drain line deposits and blockages

• Ideal for applications subject to aerobic and anaerobic environments

Utilising active enzymes to eat through biological and

organic waste products, Gamazyme Digestor is a safe and

non-corrosive product used to restore flow in drains where

grease accumulation is a problem.



624015 GAMAZYME DIGESTOR 20 LTR BIB

539


Gamazyme Cleaners

GGAAMAMAZZYYME DME DPPCC

656 587055

Gamazyme DPC is a concentrated biologically active powder formulation containing a blend of

patented bacterial strains, specifically developed to deal with sewage wastes.

Gamazyme DPC is formulated to degrade excess residual organic waste products causing blockage,

or slow draining in sinks, showers, scuppers, drains, etc. It is packed as water soluble sachets

(Solupac).

Features

• Powder biological formulation for easy use

• Biodegradable

• Overcomes potential safety problems associated with the use of toxic cleaning chemicals

Benefits

• Clears pipes and systems blocked by organic waste residuals

• Eliminates obnoxious odours from soiled pipe lines

• Cleans fouled pipes and systems, particularly long horizontal runs

• Keeps holding tank organic waste liquid pumpable and odour free

• Cost effective, saves the time, money and manpower of plumbing operations to clear blocked pipe work

The specialised bacterial strains and enzymes in Gamazyme

DPC will digest grease, fats, starch and other organic

compounds.

The bacteria in Gamazyme DPC will colonise the waste soil,

which lines the pipe work system, and degrade the waste all

the way down to carbon dioxide and water, until the system

is clean. On draining to the holding tank or sewage

treatment plant, Gamazyme DPC will greatly enhance the

biological activity breaking down solids and removing

obnoxious odours which can vent back through the

systems.



587055 GAMAZYME DPC 4.0 KG

540


Gamazyme Cleaners

GGAAMAMAZZYYME BME BOOEE

Gamazyme BOE is a new approach in odour control technology. It provides deep and effective cleaning

through microbial activity. After odour elimination, the odour causing compounds are biodegraded by

the bacteria strains. Gamazyme BOE provides a powerful combination of a fast-acting neutraliser for

immediate odour relief, and adapted bacteria for degradation of organic compounds.

Features

• Water based neutral odour control

• Fast-acting environmentally friendly odour controller with the effectiveness of deep cleaning microbes

• Available in 20 L bag in a box, as well as easy to use 1 L bottles

Benefits

• Rapidly neutralises and eliminates odours without relying on the use of odour masking or hazardous chemical

oxidisers

• Enhances the activity of the natural bacteria, resulting in higher rates of degradation

• Removes odours from garbage and waste collection areas, rest rooms, galleys, etc.

• Rapid and long term effect

Gamazyme BOE eradicates odours by attacking and

degrading the organic source of the odour.

4 way action:

1. Fragrance for rapid action

2. Binding for capturing odour

3. Cleaning action by organic breakdown

4. Accelerated microbial degradation

Gamazyme BOE is a specialised bacterial formulation

designed to eliminate odour in garbage and waste collection

areas, rest rooms, galleys, etc.



624619 GAMAZYME BOE 12X1 LTR

624077 GAMAZYME BOE 20 LTR BIB

541


Gamazyme Cleaners

GGAAMAMAZZYYME FME FCC

656 659391

A technologically advanced floor care product that provides deep and effective cleaning through

microbial activity. Gamazyme FC is based on patented fatty acid degrading bacteria strains and

biodegradable surfactants. Regular use of Gamazyme FC provides improved safety and hygiene in

galley areas.

Features

• Excellent in-depth cleaning properties

• Contains specialized patented bacterial strains forming enzymes that break down fatty acid components of grease

• Safe to use on all surfaces

• Environmentally friendly

Benefits

• Reduced slippage and improved safety conditions in galley area

• Penetrates porous floor surfaces to degrade accumulated grease and other organic materials

• Eliminates odours that attract insects; the residual organics that feed them are eliminated

• Friendly bacterial strains replace pathogenic bacteria for improved hygiene

• Results in a fresher smelling galley area

Gamazyme FC is a unique floor care product that degrades

and eliminates accumulated grease and other organic

materials. Patented fatty acid degrading bacteria strains

produce enzymes specific for the breakdown of the harder

to degrade fatty acid components of oils and fats used in

galley area. Excellent cleaning properties eliminate grease

from floor surfaces resulting in reduced slippage and

improved safety. Ingredients in Gamazyme FC enable it to

penetrate and clean embedded residual organics left in

pores, cracks, corners, crevices and microscopic pores in

floor surfaces. Regularly use of Gamazyme FC will eliminate

odors that attract insects; the residual organics that they

feed on will be eliminated.



659391 GAMAZYME FC 4X5LTR.

542


Gamazyme Cleaners

GGAAMAMAZZYYME BME BUUBB

Gamazyme BUB (Biological Urinal Blocks) is a blend of selected bacteria strains and chemical cleaners,

formulated to reduce odour problems and blockages in urinals and pipe work.

Features

• Water soluble blocks

• Biodegradable

• Easy to use

• Contains odour controlling perfume

• Can be handled without danger - environmentally safe

• Non-corrosive to all metals and synthetic materials

Benefits

• Cleans and freshens

• Removes obnoxious odours and prevents blocked urinal traps and pipe work

• Enhance the biological degradation taking place in sewage treatment systems and collecting tanks



743179 GAMAZYME BUB 1KG

743161 GAMAZYME BUB 1,8KG

743153 GAMAZYME BUB 3 KG

543

�� -*�� !" "# 5" �� %��& �'��-*&��$�(��)�'*

�� -*�� !" "# 5" �� %��& �'��-*&��$�(��)�'�

MARINE CHEMICALS



WATER TREATMENT CHEMICALS

Wilhelmsen Ships Service’s water treatment chemicals are formulated to treat and protect your onboard systems cost effectively, while meeting regulatory and OEM specifications.

Solutions include boiler water, cooling water, sea water, evaporators, and potable water as well as dosing and control equipment for safe handling and application of your water treatment programmes.

A full range of onboard test kits are available to help your crews to optimise product application for best asset protection and cost control.

MAMARRINE CINE CHEHEMICMICAALLSS Nalfleet Water Treatment Chemicals

Boiler Water Treatment

OOXXYYGGEEN SN SCCAAVVEENGNGEER PR PLLUUSS

655 698712

Oxygen Scavenger Plus is a catalysed liquid solution of diethylhydroxylamine (DEHA). Its volatile

properties ensure distribution throughout the boiler and condensate system, and hence protects

against oxygen corrosion in all parts of the system. The product also provides the required conditions

for the establishment of a passivating layer of magnetite on all inner surfaces. Oxygen Scavenger Plus

is a low toxicity product, suitable for high, medium and low pressure boiler systems.

Features

• Fast acting, liquid oxygen scavenger

• Safe and easy to use, low toxicity

• Neutralises acids occurring in condensate system

• Volatile product, provides distribution and protection throughout the boiler system

• Organic product, no dissolved solids added

• Simple test to determine treatment level

Benefits


• Reduces corrosion of iron and copper, increasing system life and reliability



698712 OXYGEN SCAVENGER PLUS 25 LTR

546



OOXXYYGGEEN CN COONTNTRROOLL

655 571315

Oxygen Control is a catalysed liquid hydrazine oxygen scavenger for boiler and steam line corrosion

protection. As an additional benefit it will assist to neutralise dissolved carbon dioxide. It provides the

required conditions for the establishment of a passivating layer (magnetite) in the boiler and condensate

system.

Features

• Oxygen Control is a liquid product, easy to feed

• Fast action due to catalyst

Benefits

• Does not contribute to conductivity

• Protects boiler, steam lines, condensate lines and feed water lines from corrosion

• Assists mechanical deaeration

• Simple test to determine level of treatment

Oxygen control can be used to condition the water used for

laying up the boiler in a wet condition.



571315 OXYGEN CONTROL 25 LTR

547



OOXXYYGGEEN SN SCCAAVVEENGNGEER 9-R 9-003355

655 777705

Oxygen Scavenger 9-035 is an aqueous solution of hydrazine, developed to prevent corrosion in

boilers and heating systems by reacting with dissolved oxygen to form harmless nitrogen and water.

Features

• Catalysed hydrazine product for rapid reaction with dissolved oxygen and prevention of corrosion in marine boilers

Benefits

• Removes dissolved oxygen from boiler feedwater without increasing dissolved solids, resulting in reduced blowdown

and fuel costs

• Maintains a protective surface layer of magnetite on the waterside of boiler metals

• Protects steam and condensate lines from aggressive oxygen attack- used in conjunction with Condensate

Treatment



777705 OXYGEN SCAVENGER 9-035 25 LTR

OOXXYYGGEEN SN SCCAAVVEENGNGEER 9-R 9-000022

655 777712

Oxygen scavenger 9-002 is a liquid oxgen scavenger based on Carbohydrazide.

Features

• Volatile oxygen scavenger in liquid form which does not add dissolved solids to the treated water

Benefits

• Safe form of hydrazine specifically formulated to reduce handling problems associated with hydrazine solutions

• Does not require special feeding equipment for safe application

• Maintains a protective surface layer of magnetite



777712 OXYGEN SCAVENGER 9-002 25 LTR

548



OOXXYYTTRREEAATT

777713

A blend of selected tannins for corrosion protection in low to medium pressure steam boilers

Features

• Iron/tannate film protects metal surface

Benefits

• Removes oxygen, protecting boiler and steam lines

• Low toxicity

• Protects feed tank and feed lines



777713 OXYTREAT 25 LTR (79600)

549



CCAAT ST SUULLPPHITHITE L (E L (CCSSLL))

655 575662

CSL is a sodium sulphite based product in ready to use liquid form. The catalyst ensures rapid

elimination of oxygen in the boiler system.

Features

• Concentrated liquid product

• Catalysed product for very rapid action

• Reacts at low temperature

Benefits

• Protects the boiler from oxygen corrosion

• Assists with mechanical deaeration

• Simple control test

Cat Sulphite L (CSL) should be used in conjunction with

other Unitor treatments. It should be dosed seperately from

other boiler water treatments. Oxygen is highly corrosive in

the boiler system, even in small amounts. Elevated

temperature operation of the hotwell is a good practice to

remove gases like oxygen. Even so, the feed water contains

oxygen which can create severe corrosion, shown as deep

and local pitting. This will quickly cause failure of the boiler

metal. CSL reacts with oxygen to form inert sodium

sulphate, thus preventing oxygen attack.



575662 CAT. SULPHITE L 25 LTR

550



CCOONDNDEENSNSAATTE CE COONTNTRROOLL

Concentrated liquid neutralising agent for corrosion control in condensate and feed water systems.

Features

• Easy to use liquid treatment

• Neutralises the acids occurring in the condensate system

• Volatilizes and carries over with the steam and so it is recycled


• Used for protection of condensate and feed water systems in boiler systems of all pressures

Benefits

• Dosage is economical and efficient

• Less maintenance required

• Lower operating costs and increased reliability



774828 Condensate Control

551



CCOONDNDEENSNSAATTE TE TRREEAATTMEMENT 9-NT 9-150150

655 777702

Condensate Treatment 9-150 is a liquid blend of neutralising amines applied for the protection of steam

and condensate pipework.

Features

• Provides effective protection of steam and condensate systems against corrosive attack by carbon dioxide and other

acidic gases

• Reduces pickup of iron and copper in condensate as a result of corrosion suppression reliability

Benefits

• Extends the life of steam and condensate systems giving reducing maintenance costs and less down time

• Using Condensate Treatment 9-150 with an oxygen scavenger gives a balanced control programme for increased

plant reliability



777702 CONDENSATE TREATMENT 9-150 25 LTR

HAHARRDDNENESSS TS TRREEAATTMEMENT 7NT 7208208

655 777706

Hardness Treatment 7208 is an alkaline liquid phosphate formulation for the prevention of scale in both

high and low pressure boilers. Hardness Treatment 7208 is an alkaline liquid phosphate with a Na:PO4

ratio of 2.6:1 that can be used in both coordinated and residual phosphate boiler water treatment

programmes.

Features

• Application can easily be automated using Naltrak automation equipment

• Simple test kit is available

Benefits

• Provides phosphate scale control in both high and low pressure boilers

• May be used as part of a coordinated phosphate programme

• Easy to apply liquid formulation



777706 HARDNESS TREATMENT 7208 25 LTR

552



HAHARRDDNENESSS CS COONTNTRROOLL

655 571299

Hardness Control is a highly soluble, dry powder product used for the reduction of hardness in boilers.

It will precipitate calcium hardness as a non-adherent sludge.

Features

• Highly active phosphate based compound

• Easily dissolved in water for dosing

Benefits

• Scale problems due to calcium are eliminated

• Maintains sludge in a non-adherent state for removal by blow down


• Can be used for boilers of all pressures

• Unitor Hardness Control does not influence the alkalinity in the system



571299 HARDNESS CONTROL 25 KG

Approvals

Approved by the Norwegian National Institute of the Public

Health for the use in system where steam is used for

drinking water production

553



AALLKKAALLINITINITY CY COONTNTRROOLL

655 571307

Concentrated liquid alkaline product for corrosion and scale control in boilers.

Features

• Convenient liquid treatment which provides the basic alkalinity on which successful water treatment depends

• Maintains alkalinity within optimum limits

• Provides optimum conditions for hardness control to function

• Assists in precipitation and blowdown of magnesium and calcium salts

• Neutralises acid conditions

• Can be used with most treatment chemicals, in conjunction with a coordinated treatment programme

Benefits

• Allows efficiency to be maintained, and reduces maintenance

• Will assist in keeping silica in suspension

• Simple testing to determine level of treatment

• Can be used in boilers of all pressures

• Can be used as a neutraliser after acid cleaning operations



571307 ALKALINITY CONTROL 25 LTR

Approvals


Health for the use as neutraliser after acid cleaning

operations in fresh water generators

554



BBWWT LT LIQIQUUID PID PLLUUSS

655 777701

BWT Liquid Plus is a blend of phosphate, alkalinity and polymer dispersants designed for the control of

scaling and corrosion in the boiler. BWT Liquid Plus can be used as a phosphate treatment for low

hardness feed waters in boilers operating at pressures up to 40 bar.

Features

• Minimises scale formulation, corrosion and sludge accumulation

• Effective iron dispersant

Benefits

• Simple to control

• Complies with FDA regulations



777701 BWT LIQUID PLUS 25 LTR

555



BBOOILILEER CR COOAAGGUULLAANTNT

655 571331

Liquid sludge conditioner designed to prevent deposits.

Features

• Liquid product, easy to feed

• Prevents the formation of adherent deposits and sludges in boilers

• Used in conjunction with Wilhelmsen Ships Service Chemical Service's standard range of boiler water treatments

• Used to coagulate small amounts of oil which have contaminated the boiler water

Benefits

• Keeps boilers clean and extends boiler operational time between cleaning

• Keeps sludge dispersed for efficient removal by blowdown



571331 BOILER COAGULANT 25 LTR

556



AAUUTTOOTTRREEAAT 25T 25

655 698720

Autotreat is an advanced liquid boiler water treatment chemical formulated with alkaline compounds,

scale and corrosion inhibitors, volatile amines for protection of condensate system, and sludge

conditioner. The product combines well known phospate treatment with new polymer technology. This

ensures that precipitates are kept soft and nonadherent for easy removal by blowdown.

Features

• Liquid boiler water treatment chemical for simplified dosing and handling

• Suitable for all boilers, up to 30 bar pressure

• Contains volatile amines to neutralise acids occurring in condensate system

Benefits

• Prevents scaling and corrosion, increasing system life and reliability

• Dispersant action suspends sludge and sediment particles for efficient removal by blowdown

• Keeps boiler tube surfaces clean, promoting the best heat transfer conditions

• Simple testing to determine treatment level



698720 AUTOTREAT - 25 LTR

557



MUMULLTTIPIPLLUUSS

777709

Multiplus is a multi-functional boiler water treatment formulated to be used in conjunction with Oxytreat

to provide a complete treatment programme for low to medium pressure steam boilers with low

hardness feed-water.

Features

• Utilises advanced polymer technology

• Contains a neutralising amine for condensate corrosion control

• Easy to apply and control

Benefits

• Minimises scale-formation, corrosion and sludge accumulation

• Effective iron dispersant



777709 MULTIPLUS 25 LTR (79601)

558



LLIQIQUUITITRREEAATT

655 571273

Liquitreat is a liquid blend of alkaline compounds, scale and corrosion inhibitors, oxygen scavenger and

sludge conditioner.

Features

• Liquid multi-functional treatment for simplified dosing and handling

• Suitable for use with auxiliary boilers and waste heat units

• Contains sulphite oxygen scavenger

Benefits

• Combined with good control of feed water temperature will ensure effective oxygen removal

• Heating surfaces are maintained at optimum thermal efficiency

• Smoke and water tube boilers maintained at peak level efficiency; up to 18 bar pressure



571273 LIQUITREAT 25 LTR

Approvals


Health for the use in systems where steam is used for


559



CCOOMBMBITITRREEAATT

655 571265

Combitreat is a dry powder containing alkalinity builders, phosphates and sludge conditioners.

Features

• Combined conditioning treatment for simplified dosing and handling

• Suitable for use with all auxiliary boilers, waste heat units, economisers, package boilers, smoke and water tube

boilers, up to 16 bar pressure

• Dispersant action suspends sludge and sediment particles

Benefits

• Boiler kept at peak level efficiency

• Heating surfaces maintained at optimum thermal conditions



571265 COMBITREAT 25 KG

Approvals


Health for the use in system where steam is used for


560


Cooling Water Treatment

AANTNTIFIFOOUULLAANT 9-NT 9-321321

653 777700

Antifoulant 9-321 has been developed for the control of fouling by shellfish, micro-organisms and

fungal growth in marine seawater cooling systems.

Features

• Very effective for the control of mussels, micro-organisms and biological growths in sea water cooling systems

Benefits

• No danger to marine life when used as recommended



777700 ANTIFOULANT 9-321 25 LTR

Approvals

• Approved by the UK Department of Trade for use in

systems where water is drawn from that system for

the production of potable water by evaporators

• Approved by the Norwegian Institute for Public

Hygiene and health for the same application

561



RROOCCOOR NB LR NB LIQIQUUIDID

653 571356

Rocor NB Liquid is a liquid, nitrite/borate based compound with organic corrosion inhibitors for use in

closed cooling water systems.

Features

• Liquid product, easy to use

• By forming an oxide film on the metal surfaces electrolytic corrosion is prevented

Benefits

• Effective against cavitation and erosion

• Compatible with hoses, gaskets and seals

• Compatible with glycol used for frost protection

• Simple control tests

The product can be used for corrosion inhibition in many

types of closed recirculation systems such as:

• Diesel engine cooling water systems

• Compressor cooling water systems

• Centralised cooling systems

• Hot water heating systems

• Auxiliary machinery cooling systems



571356 ROCOR NB LIQUID 25 LTR

Approvals

• Approved by major diesel engine manufacturers • Approved by the Norwegian National Institute of

Public Health for the use in systems where cooling

water is used for heating purpose in evaporators

562



EENGNGINE WINE WAATTEER TR TRREEAATTMEMENT 9-NT 9-108108

653 777703

A balanced mixture of corrosion inhibitors, specially formulated to give a high nitrite furnish which is

becoming a more frequent requirement for the new generation of high efficiency diesel engines.

Features

• Contains dispersant for cleaner and more efficient cooling systems

Benefits

• Does not affect gaskets or hoses

• Compatible with anti-freeze solutions



777703 ENGINE WATER TREATMENT 9-108 25 LTR

Approvals

• Approved by major diesel engine manufacturers

• Approved by the UK Dept. of Transport for use in

diesel cooling systems where heat from the cooling

water is used for distilling sea water for domestic

purposes in evaporators onboard

563



NANALLFFLLEEEET 2000T 2000

Nalfleet 2000 combines film forming corrosion inhibitors with a scale suppressant in liquid form, for

ease of application. Nalfleet 2000 is soluble in water. Nalfleet 2000 does not contain chromates.

Features

• Protects all common metals in cooling systems from corrosive attack


Benefits

• Minimises sludge and scale deposits

• Protects against cavitation erosion

• Compatible with anti-freeze solutions

• Simple to control and safe to handle

Note: Previous name NALCOOL 2000



777711 Nalfleet 2000 210ltr

777710 Nalfleet 2000 25 ltr

Approvals


564



DDIEIESSEELLGGUUAARRD NBD NB

653 571349

A dry powder, nitrite/borate based compound with organic corrosion inhibitors for use in cooling water

systems.

Features

• By creating an oxide film on the metal surfaces, electrolytic corrosion is prevented

• Compatible with non-metals such as hoses, gaskets and seals

• The product can be used for corrosion inhibition in many types of closed recirculation systems such as:






Benefits

• Effective against cavitation and erosion

• Compatible with glycol used for frost protection

• Simple control tests



571349 DIESELGUARD NB 25 KG

Approvals

• Approved by major diesel engine manufacturers • Approved by the Norwegian National Institute of

Public Health for the use in systems where cooling

water is used for heating purpose in evaporators

565



EENGNGINE WINE WAATTEER TR TRREEAATTMEMENT 9-NT 9-111A111ALL

653 777704

Engine Water Treatment 9-111AL contains a balanced mixture of corrosion inhibitors in liquid form,

together with an antiscalant. EWT 9-111AL is formulated to protect systems containing aluminium

components.

Features

• Protects all metals (including aluminium) in engine cooling systems from corrosion attack

• Does not affect gaskets or hoses

Benefits

• Keeps systems free from sludge and scale deposits

• Compatible with antifreeze solutions



777704 ENGINE WATER TREATMENT AL 9-111 25L

Approvals

• Approved by major diesel engine manufacturers • UK Department of Trade approved

566



CCOOOOLLTTRREEAAT AT ALL

653 680843

Cooltreat AL is an organic liquid corrosion inhibitor with extended life for use in closed cooling water

systems. This product offers protection for all commonly used materials in engine cooling water

systems, including aluminium. Unlike other coolants, Cooltreat AL does not contain components

subject to rapid depletion i.e. Nitrite and Silicate. Based on aliphatic acid technology Cooltreat AL is

stable and hence the test frequency can be reduced. Cooltreat AL is fully organic and biodegradable.

Features

• Liquid product, easy to use

• The product can be used for corrosion inhibition in many types of closed re-circulation system such as:






Benefits

• Environmentally friendly, fully organic product, low toxicity

• Compatible with hoses, gaskets and seals

• Effective against cavitation and erosion. Superior heat transfer properties

• Compatible with glycols for frost protection

• Stable product-non depleting



680843 COOLTREAT AL

Approvals


567



MAMARR--7711

653 735977

MAR-71 is a very effective biocide, used to prevent and combat microbiological growth in closed

cooling water systems as well as in lubricating oil systems. Bacteria are the cause of many corrosion

problems, as while they grow, they produce a variety of acids and in some cases slimy layers on metal

surfaces which results in reduced heat transfer and corrosion in bearings. Nitrites, Phosphates and

emulsifying oils are good nutrient media for bacteria. MAR-71 has proven to be a very effective

disinfectant. Lower dosages of MAR-71 can also be used to prevent infection.

Features

• Kills micro-organisms in closed cooling water systems and lubrication oil systems

• HOCNF registered for use in the North Sea Offshore sector, yellow/gold classification

Benefits

• One product, two different applications

• No cases have been reported where bacteria have become immune to MAR-71

• Prevents corrosion caused by microarganisms

• Biodegradable, does not accumulate in the environment



735977 MAR-71 BIOCIDE 3X5L NOT IN USA&CAN

568



BBIOIOGGUUAARRDD

Bioguard is a very effective, amine based dispersant of marine growth such as algae, shellfish and

micro-organisms to prevent fouling of sea water (cooling) systems. Because of it's filming properties,

the product also acts as a corrosion inhibitor.

Features

• Liquid treatment which is easy to use

• Extremely effective in the control of sea water fouling organisms

• Maintains heat transfer in systems and extends the periods between cleaning

• Biodegradable

• Suitable for all types of systems using sea water, both static and flowing

Benefits

• Multi-system use

• Many applications covered by one product

• Reduces maintenance and down time

• Economic in use



777851 Bioguard 25 ltr

Approvals

• Approved by the U.K. Department of the Environment

as a marine antifoulant in the inlet of evaporators

producing potable water

569


Water Production Treatment

VVAAPPTTRREEAAT 25 LT 25 L

654 571364

A concentrated liquid blend of polymer and antifoam agents for controlling scale and foam in

evaporators.

Features

• Ensures that the evaporator works at maximum efficiency by keeping heat transfer surfaces free of scale

• The antifoaming properties ensure that distillate quality is high as carry over is eliminated

• Will gradually remove existing scale when dosed at twice the normal rate

• Concentrated, safe liquid, easy and economical dosing

Benefits

• Reduces downtime and maintenance



571364 VAPTREAT 25LTR

MAMAXXI-VI-VAAP PP PLLUUSS

654 777707

Maxi-Vap Plus is a concentrated solution of an organic poly-electrolytes specifically developed for the

control of scale deposition in sea water evaporators. It is miscible with water in all proportions.

Features

• Maintains design output and efficiency of evaporators for extended periods

• Improves distillate quality by controlling foaming and carry over

Benefits

• Reduces downtime and maintenance costs making it economical in use



777707 MAXI-VAP PLUS 25 LTR

Approvals

• Approved by the UK Department of Trade Marine

Safety Agency

570



MUMULLTTIVIVAAPP

654 759340

MultiVap is a concentrated liquid blend of antiscalant and antifoam agents for controlling scale and

foam in seawater evaporators. MultiVap has been formulated for optimum efficiency when used in large

evaporators with high distillate production.

Features

• Highly concentrated, economical and space saving for large evaporator units

• Ensures optimum efficiency by keeping heat transfer surfaces clean and free of scale

Benefits

• Reduces downtime and maintenance

• Contains antifoam to give high distillate quality and prevent carry over



759340 MULTIVAP 25LTR

571



EEVVAAPPOORRAATTOOR DR DEEFFOOAAMEMERR

654 638676

Antifoam for Seawater Evaporator. Evaporator defoamer is used in conjunction with Vaptreat

antiscalant when foaming problems occur in the evaporator. Foaming problems can occur with certain

design of evaporators and under certain conditions like elevated sea water temperature. Evaporator

defoamer is used to combat such problems and prevent foaming and carry-over.

Features

• NSF listed according to Drinking Water Standard 60

Benefits

• Compatible with all types of evaporator antiscalant

• Easy to dose



638676 EVAPORATOR DEFOAMER

572



PPOOTTAABBLLE WE WAATTEER SR STTAABBILILISISEER LR LIQIQUUIDID

659 777714

Potable Water Stabiliser Liquid is a combination of polyphosphates, having stabilising properties. The

product effectively and economically provides scale and corrosion control in potable water and other

shipboard once-through water systems.

Features

• Prevents “Red Water” in the ship's potable water systems

• Controls corrosion and scaling in pipelines and other equipment handling softened or evaporated water

Benefits

• Increases system life and reduces maintenance costs

• Supplied in convenient to use liquid form



777714 POTABLE WATER STABILISER LIQUID 25L

573



PPOOTTAABBLLE WE WAATTEER SR STTAABBILILISISEERR

659 624916

Potable Water Stabiliser is a concentrated, highly soluble polyphosphate in powder form.

Features

• Prevents “Red Water” in potable water systems

• Provides scale and corrosion control in hot water heaters, coolers and water tanks

• Effective at temperatures up to 60°C (140°F)

Benefits

• Increases system life and reduces maintenance costs

• Controls corrosion in pipelines and other equipment handling softened or evaporated water

• No restrictions on use of the treated water as feed water to boilers or engine cooling systems



624916 POTABLE WATER STAB 25 KG

Approvals

• Approved by Norwegian National Institute of Public

Health as an additive to drinking water.

• Approved by NSF according to Standard 60

574



RRO SO SCCAALLE CE COONTNTRROOLL

659 777716

RO Scale Control is a broad spectrum scale inhibitor for Reverse Osmosis systems. Scaling and iron

fouling of the RO membranes will reduce system performance and lead to premature membrane

replacement. Precipitation of scale and deposits build up on the RO membrane, which leads to poor

permeate quality, low permeate production, unscheduled downtime, increased water consumption and

increased energy costs.

Features

• Effective on a broad range of scale forming compounds

• Liquid formulation

Benefits

• Cost effective dose rate

• Compatible with a wide range of RO membranes



777716 RO SCALE CONTROL 25 LTR

RRO BO BISISUULLPPHITHITEE

659 777852

RO Bisulphite is a solution of sodium hydrogen sulphite used in the preservation of RO membranes and

as a dechlorinating agent.

Features

• Suitable for preservation and dechlorination

Benefits

• Food grade product



777852 RO Bisulphite

575



RRO AO ALLKKAALLINE CINE CLLEEAANENERR

659 777718

RO Alkaline Cleaner is a membrane cleaner developed to support the cleaning of acid in soluble

sulfates of calcium, barium and strontium as well as calcium fluoride.

Features

• Mild alkaline formulation


Benefits

• Compatible with wide range of RO membranes

RO Alkaline Cleaner is also effective in removing iron oxides

and hydroxides as well as calcium carbonate, though RO

Mild Acid Cleaner is preferred for these foulants. RO Alkaline

Cleaner is highly effective when used in combination with

high pH detergent cleaners such as RO Surfactant Cleaner

to help remove organic substances and microbial slimes.

During normal operation, RO membranes can become

fouled, which greatly reduces the efficiency of the system.

Deposits build up on the membrane until they cause a

reduction in permeate flow and loss in salt rejection. The

effects of fouling can lead to poor water quality, loss in

production, unscheduled downtime and membrane

replacement. A regular maintenance and cleaning program

can provide return on investment (ROI) results ranging from

100 to 250% by maintaining low pump output pressures

and extending the membrane's life.

Elements should be cleaned whenever the normalized

permeate flow rate or salt rejection decreases by 10-15% or

the differential pressure increases by 10-15% from the

original baseline data.



777718 RO ALKALINE CLEANER 25 LTR

576



RRO MILO MILD AD ACCID CID CLLEEAANENERR

659 777715

RO Mild Acid Cleaner is a membrane cleaner specifically designed to remove iron fouling. It also is

effective against light calcium carbonate scaling. The efficacy of RO Mild Acid Cleaner can be

enhanced by the addition of RO Alkaline Cleaner to the cleaning solution although some minor pH

correction may be necessary.

Features

• Mild acid formulation


Benefits




777715 RO MILD ACID CLEANER 25 LTR

RRO SO SUURRFFAACCTTAANT CNT CLLEEAANENERR

659 777201

RO Surfactant Cleaner has been developed for the cleaning of reverse osmosis (RO), nano-filtration

(NF) and ultra-filtration (UF) membranes. RO Surfactant Cleaner is a formulation based on an anionic

surfactant and is highly effective in removing colloidal and other organic matter.

Features

• Effective surfactant formulation


Benefits




777201 RO SURFACTANT CLEANER 25 LTR

577



BBAALLLLAASST TT TAANK INHIBNK INHIBITITOOR 9-R 9-993333

652 777013

Ballast Tank Inhibitor 9-933 is a liquid film-forming corrosion inhibitor. It is a blend of organic and

inorganic inhibitors and it contains no chromates and is completely soluble in sea water.

Features

• Effective for use in ballast tanks, cofferdams, barges and voids

• Forms tightly bonded protective film on all metal surfaces below water level

Benefits

• Protective film is stable over a wide pH and temperature range

• Formulated to give reduced pollution problems if accidentally discharged to sea

• Ideally suited for ballast and other tank protection during ship lay-up periods



777013 BALLAST TANK INHIBITOR 9-933 25 L

AAQQUUAABBRROOME TME TAABBLLEETTSS

657 720243

A highly compacted 20 gram bromine tablet suitable for use in a brominator. Slow dissolving and ideal

for continuous dosage programmes.

Features

• Slow dissolving tablet

• Bromine based disinfectant

Benefits

• Totally soluble

• Effective at wide range of temperatures

• Easy to apply



720243 AQUABROME TABLETS 2X5KG

578



PPOOOOL CL CLLAARRIFIFIEIERR

657 766539

Highly concentrated product based on specially formulated polymers that quickly clears cloudy water.

Features

• Concentrated formula

• Contains specially formulated polymers

• Easy to use - no premixing

• Does not affect pH

Benefits

• Clears cloudy water quickly

• Helps reduce chlorine usage

• Makes water sparkle

Pool Clarifier restores sparkling clear water by binding small

particles into larger masses that can be easily removed by

the filter. This product works while the filter is in operation,

requires no premixing, contains no alum and does not affect

the pH.



766539 POOL CLARIFIER 1LTR

579



PPOOOOL SL SUURRFFAACCE CE CLLEEAANENERR

657 766436

For removal of scum (bath tub ring) along the water line. Quickly eliminates oils, greases, light scale and

fresh stains.

Features

• For pools, spas and hot tubs

• Prevents staining and controls scale build-up

• Removes oils, grease and other deposits from pool surfaces

• Cleans and maintains pool surfaces

This product removes most stubborn scale, grease and

common dirt. Clings to vertical surfaces for easy cleaning.

May be used on plastic, vinyl, fibreglass, ceramic, stainless

steel, aluminium and painted surfaces.

Unlike many cleaners, Pool Surface Cleaner is completely

compatible with swimming pool water.



766436 POOL SURFACE CLEANER 1LTR

580



PPOOOOL AL AND SND SPPA HAA HARRDDNENESSSS

657 766538

Raises calcium hardness of pool and spa water to assist in the prevention of corrosion, etched plaster

and other problems resulting from low calcium levels.

Features

• For Pool, spas and hot tubs

• Raises calcium hardness level

• Helps prevent etching and staining

• 100% active

Benefits

• Multi-use product

This product is used to raise the calcium hardness in pool

water. Low calcium hardness may cause pool water to be

corrosive which may result in staining, etching or distorting

of all types of pool surfaces. Surface etching by low calcium

hardness will become more abrasive and uncomfortable for

bathers. Rough surfaces also increase problems with algae

and makes cleaning more difficult.



766538 POOL AND SPA HARDNESS 18KG

581



SSPPA DA DEEFFOOAAMEMERR

657 766540

Eliminates unsightly foam from spa water, hot tubs and other water features by soaps, suntan lotion

and detergents.

Features

• Control and prevent foaming

• Quickly eliminates foam from spas, hot tubs and other water features

• Easy to use



766540 SPA DEFOAMER

582



PPH INCH INCRREEAASSEERR

657 766537

A convenient and safe granular product for raising the pH of pool water with minimal effect on overall

alkalinity.

Features

• Convenient granular product

• 100% active

• Safe for all types of pools

• Protects pool surfaces and equipment from corrosion due to low pH

• Quickly and easily raises pH

• Makes water more comfortable for bathers

Benefits

• Reduces maintenance costs

Used for raising the pH of pool water.

Proper pH control is essential to eliminate problems caused

by pH being too low or too high. If pH is too low then

corrosion and staining may occur.



766537 pH INCREASER 25KG

583

�� -2�� !" "# 5" 6$�� 7 � %��& �'��-2&��$�(��)�'*

�� -2�� !" "# 5" 6$�� 7 � %��& �'��-2&��$�(��)�'�

MARINE CHEMICALS



FUEL OIL CHEMICALS

Our fuel solutions assist in overcoming the problems caused by inconsistent fuel quality and provide solutions for reducing fuel sludge formation, minimising carbon emissions, reducing build up of deposits and manage your distillate fuel by improving lubricity and stability.

All WSS chemical products meet local and international regulation standards and are designed to ensure that environmental impact is minimal wherever possible.

MAMARRINE CINE CHEHEMICMICAALLSS Unitor Fuel Oil Chemicals

Distillate Fuel Treatment

BBIOIOCCOONTNTRROOL MAL MAR 7R 711

650 571257

It's essential to have adequate storage for marine fuel. But microorganisms can corrode fuel storage

tanks and systems, leading to clogged filters and nozzles, and degraded fuel. Biocontrol MAR 71 is a

specially designed liquid that protects fuel against micoorganisms.

Features

• Kills microorganisms in fuel oil

• Keeps filters and nozzles free from clogging

• Prevents corrosion in fuel systems and doesn't form any corrosive combustion products

• Safe for use on all materials, including metal and synthetic rubber

Benefits

• You can be sure that Biocontrol MAR 71 will kill all microorganisms. There have been no reported cases of bacteria

becoming immune to this liquid

• With filters and nozzles clean and free from bacteria remnants, you can run a trouble free operation



571257 BIOCONTROL MAR71 25L NOT IN USA&CAN

586



DDIEIESSEEL FL FUUEEL LL LUUBBRRICICITITY IMPY IMPRROOVVEERR

650 777195

Diesel Fuel Lubricity Improver is formulated to enhance the lubricity of diesel fuels. It has been found to

be particularly effective in ultra low sulphurdiesel fuels and gas oils that are blended to meet

governmental regulations on fuel sulphur content.

Features

• Improves the lubricity of low sulphur diesel fuels

• Can be used as a stand-alone product or component in diesel packages

• It provides excellent performance as a lubricity improver component in diesel detergent packages and does not

affect the water emulsification tendency of a fuel as measured by ASTMD-1094.

• Effective at 50-150 ppm range in meeting the HFRR requirement for lubricity specifications

• Does not interact with the fuel

Benefits

• Protects your engine from wear so you can avoid unscheduled and expensive maintenance

• Quality is ensured so you can rest easy with good engine protection

• You can safely use the product in all types of fuels



777195 DIESEL FUEL LUBRICITY IMPROVER 25 L

587



DDIEIESSEEL FL FUUEEL SL STTAABBILILISISEERR

650 777190

Diesel Fuel Stabiliser is a multifunctional distillate fuel oil additive. It is used to improve lubricity, as well

as help maintain colour and stability to control the formation of organic sludge and to inhibit corrosion.

Diesel Fuel Stabiliser also disperses accumulated deposits, and reduces filter clogging, injector

sticking, and corrosion of bunkers and fuel lines.

Features

• Improves fuel lubricity

• Reduces wear of fuel pumps and fuel injection equipment

• Proven by independent tests – HFRR and Bosch

Benefits

• Maintains long term storage and thermal stability of marine distillate fuels

• Protects against corrosion

• Protects against fuel injection fouling and fuel filter plugging



777190 DIESEL FUEL STABILISER 25 LTR

Accessories


571257 BIOCONTROL MAR71 25L NOT IN USA&CAN

588


Heavy Fuel Oil Treatment

FFUUEELLCCAARREE

Fuelcare is a pre-combustion conditioning treatment for residual fuel oils. Fuelcare prevents and

disperses sludge, stops stratification of fuel in tanks, breaks water-in-oil emulsions and gives a better

separation of water and sediments from oil.

Features

• Disperses and prevents sludge formation, keeping fuel systems cleaner

• Stabilises fuel blends, reducing compatibility problems

• Fuel acids are neutralised

• Demulsifies water from fuel and improves centrifugal separation

• Can be used as a cleaner for pre-heaters, burner tips, fuel filters, etc

Benefits

• Reduces corrosion in tanks and fuel lines

• Prevents filter blockage and improves injector spray pattern

• Limits sludge and tank bottom deposits, maintains a cleaner fuel system

• Fuel system components have longer working life and less down-time

It provides a more homogeneous fuel for combustion.

Vessels bunker lines remain cleaner and filter blockages are

reduced or prevented. Centrifugal water and contaminant

separation is made more efficient and all system

components stay cleaner.



766154 FUELCARE 25 LTR

766162 FUELCARE 210 LTR

589



GGAAMAMABBRREEAAKK

650 767113

Gamabreak rapidly breaks water-in-oil emulsions in all grades of fuel. It assists water removal in the

settling tank and fuel centrifuges.

Features

• Rapidly breaks water-in-oil emulsions

• Improves separator efficiency

• Prevents sludge formation in tanks and lines

Benefits

• Helps you to keep your fuel as water free as possible

• Reduction in sludge reduces your maintenance requirements

Gamabreak breaks water-in-oil emulsions by lowering the

surface tension between the two phases. It is insoluble in

water and remains effective even after the water has been

removed. Powerful dispersants combat existing sludge

formations while homogenising the fuel to prevent new

sludge from being formed. Centrifugal separation of catalyst

fines is improved, reducing abrasion damage. The

homogenising action of Gamabreak keeps heavy fuel

particles in suspension, therefore fuel filters block less

frequently, tanks and lines remain cleaner, and in general,

fuel systems maintenance is minimised. Consequently, a

greater proportion of supplied fuel is available for

combustion.



767113 GAMABREAK 25 LTR

590



DDUUAAL PL PUURRPPOOSSE PE PLLUUSS

Dual Purpose Plus is a concentrated combustion improver for heavy fuel oils. It also has fuel

conditioning properties.

The catalysts in Dual Purpose Plus react with heavy fuel particles during combustion. Anti-

polymerisation agents inhibit sludge formation, while dispersants stabilise the fuel.

Features

• Improves combustion

• Reduces carbon/ash deposits

• Limits soot formation and smoke emissions

Benefits

• Overall improvement in fuel combustion and economy

• Minimises cold-end corrosion of exhaust trunking, uptakes, cylinder liners, valve stems, etc

The fuel ignition temperature is reduced, resulting in

increased combustion efficiency with less carbon left to form

smoke and soot. Engine and exhaust systems are kept

cleaner with longer service life and less maintenance.

Anti-polymerisation agents inhibit sludge formation, while

dispersants stabilise the fuel. This results in a cleaner fuel

system and better fuel flow, giving improved fuel atomisation

and greater combustion efficiency.

Sulphuric acid corrosion caused by condensing exhaust

gases may be seen in any of the cooler parts of the boiler or

engine system. Typical problem areas are cylinder liners

(clover-leaf corrosion), valve stems and funnel uptakes. Dual

Purpose Plus catalytically inhibits the formation of acid

gases. This reduces the amount of acid present, thereby

reducing acid corrosion.



571166 DUAL PURPOSE PLUS 25 LTR

571182 DUAL PURPOSE PLUS 210 LTR

591



BBUURRNANAIDID

650 767566

Burnaid is a concentrated organic combustion improver. It contains no metals and can be used in

diesel engines and boilers. The organic compounds in Burnaid promote improved combustion by

reacting with fuel particles, thus lowering ignition temperatures.

Features

• Improves combustion

• Reduces carbon deposits

• Limits soot formation

• Limits smoke emissions

Benefits

• Contains no metals

• Improves boiler efficiency

The organic compounds in Burnaid promote improved

combustion by reacting with fuel particles, thus lowering

ignition temperatures. The result is less carbon deposits,

soot and smoke. Engine and boiler combustion surfaces are

kept cleaner. Sludge formation is inhibited through the action

of anti-polymerization agents. Fuel stability is improved

through the action of solvents and dispersants. The results

are improved combustion efficiency and fuel atomization.



767566 BURNAID 25 LTR

592



DDIEIESSEELLITITEE

650 767112

Dieselite is a multi-functional fuel treatment containing combustion catalysts and ash modifiers. It is

intended for use in diesel engines and boilers burning residual fuels.

Features

• Reduces smoke, soot and carbon deposits

• Raises the melting point of sodium vanadium fuel ash to reduce high temperature corrosion and ash deposits

• Cold-end corrosion reduced by inhibiting acid flue gas

Benefits

• Extends service life of your engine components

• Keeps your engine in good performance by reducing soot and unburned carbon

Carbon residue formation during combustion is inhibited by

catalysts that lower the ignition temperature of heavy

asphaltenic particles. The combustion time is consequently

increased, leading to a reduction of tar deposits and

carbonaceous firescale.

Ash modifiers combine with fuel combustion ash to raise the

sinter and melting points of the ash above the engine or

boiler normal operating temperatures. High temperature

corrosion is minimised, reducing maintenance and extending

service life. The majority of ash formed is ejected with the

exhaust gases in a fine, solid state, and any ash remaining in

the exhaust system is easily removed by light brushing.

The conversion of fuel sulphur to potentially corrosive

sulphur trioxide gas is also inhibited. Sulphur trioxide reacts

with condensed steam in the exhaust trunking, funnel

uptakes and other cooler zones to form sulphuric acid.

Dieselite is a wide spectrum additive intended for continuous

use.



767112 DIESELITE 25 LTR

593



VVAALLVVEECCAARREE

650 769091

Valvecare is specifically intended for treatment and reduction of corrosive deposits formed on exhaust

valve seats and turbocharger components.

Features

• Raises the melting point of sodium vanadium ash and reduces high temperature corrosion and guttering

• Keeps exhaust valves and turbochargers clean

• Reduces the amount of ash deposits throughout the exhaust system

Benefits

• Extends service life of exhaust valves and extends the service interval for water or granulate washing of turbocharger

blades

• Valvecare has been specially formulated to combat exhaust valve burning and erosion problems associated with

sodium and vanadium contamination of poor quality heavy residual fuels

Valvecare physically modifies fuel ash, raising the sinter and

melting points of the ash above the normal engine operating

temperatures. Modified ash particles are solid, small and

non-adhesive and are ejected with the exhaust gas stream.

Valve seatings remain intact as ash deposits on valve seats

are reduced. Guttering is minimised and valve cone and seat

lives are extended, allowing for greater time between

overhauls. Turbocharger and exhaust system fouling is

controlled as the ash particles in the gas stream are less

adhesive. Exhaust systems remain cleaner and any ash that

is formed is friable and easily removed by conventional

methods such as brushing.

Another advantage found with Valvecare is acid reduction.

Vanadium in the fuel has a catalytic action, increasing the

conversion from sulphur dioxide to sulphur trioxide during

combustion. The sulphur trioxide then reacts with steam in

the exhaust system, increasing the dew point to form

sulphuric acid. Valvecare keeps the complex vanadium and

sodium ash compounds in a solid, non-molten state,

inhibiting fused salt corrosion.



769091 VALVECARE 25 LTR

594



SSOOOOT RT REEMOMOVVEERR

650 571240

Soot Remover is a dry powder compound formulated for safe removal of soot and deposits from

boilers and diesel engine exhaust systems.

Features

• Reduces soot and slag deposits

• Reduces cold-end corrosion

• Assists soot blowing

Benefits

• Saves you money by improving heat transfer

• Saves you money by increasing boiler efficiency

If deposits are allowed to form on heat exchangers, the loss

of efficiency can be directly related to extra fuel

consumption. A 1 mm deposit is approximately equivalent to

a 10% efficiency loss, a 3 mm deposit can reduce efficiency

by up to 50%. The normal ignition temperature of soot is

around 600°C. This means that it is burned only in the

hottest parts of the boiler or diesel exhaust systems. Due to

the catalytic action of Soot Remover, the ignition

temperature of the soot/deposit is reduced to less than

280°C. The carbon deposits are thus ignited, leaving an

easily removed ash.

The use of Soot Remover not only provides greater fuel

efficiency, but also prevents acid formation in areas where

severe corrosion could result in expensive damage, i.e. heat

exchangers, superheaters, economisers, exhaust paths/

stacks.



571240 SOOT REMOVER 25 KG

Accessories


572073 FIXED INJECTOR

572065 PORTABLE SOOT INJECTOR

595



SSOOOOT RT REEMOMOVVEER LR LIQIQUUIDID

650 624627

Soot Remover Liquid is formulated for effective prevention of soot and firescale deposits from boilers

and diesel engine exhaust systems.

Features

• For the prevention of soot and firescale deposits in diesel engine and boiler exhaust systems

• For reduction of cold-end corrosion where surface temperatures are lower than the dew point of the exhaust gases

• Aids soot blowing

Benefits

• Saves you cleaning time by reducing soot and slag deposit

• Reduced cold-end corrosion reduces your meed for maintenance

• Saves you money by improving heat transfer and boiler efficiency

If firescale is allowed to form on heat exchangers, the loss of

efficiency can be directly related to extra fuel consumption. A

1 mm deposit is approximately equivalent to a 10%

efficiency loss, a 3 mm deposit can reduce efficiency by up

to 50%.

The normal ignition temperature of soot is around 600°C.

This means that it is burned only in the hottest parts of the

boiler or diesel exhaust systems. Due to the catalytic action

of Soot Remover Liquid, the ignition temperature of the soot/

firescale is reduced to less than 250°C. The carbon deposits

are thus ignited, leaving an easily removable ash.

The use of Soot Remover Liquid not only provides greater

fuel efficiency, but also prevents acid formation in areas

where severe corrosion could result in expensive damage,

i.e. heat exchangers, superheaters, economisers, exhaust

paths/stacks.



624627 SOOT REMOVER LIQUID 25 LTR

Accessories


767926 AUT .DOSING UNIT FOR SOOT REMOVER L

625194 MANUAL DOSING UNIT F/SRL

596

�� 14�� !" "# 5" �� /0$ %2��& �'�14�&��$�(��)�'*

�� 14�� !" "# 5" �� /0$ %2��& �'�14�&��$�(��)�'�

marine chemicals

cleaning chemicalsWater treatment chemicals

Fuel Oil chemicalstest kits and equipment

test kits & equipment

WSS offers a full range of kits for water and fuel testing. The Nalfleet test kits for water analysis makes sure you have your boiler and cooling systems in good shape and that your valuable assets are protected.

With the Unitor fuel oil test kits you can easily identify problems with the fuel (water contamination or fuel incompatibility) and easily measure density and viscosity to protect your investment in the best possible way.

To ensure efficient onboard cleaning operations, WSS offers a large range of cleaning equipment. From cargo hold cleaning, high pressure cleaners and ultra sonic baths to more basic spray applicators – the Unitor cleaning equipment will speed up your cleaning operations.

In addition, WSS offers a full range of dosing equipment as well as personnel protection equipment for the safe handling of marine chemicals.

MAMARRINE CINE CHEHEMICMICAALLSS Test kits and equipment

Nalfleet Water Dosing Equipment

NANALLTTRRAAK 1000 CK 1000 CWWT DT DOOSSING SING SYYSSTTEEMM

664 777735

The Nalrak 1000 system is a packaged unit

specifically designed for the application and

control of nitrite based engine cooling water

treatment programmes.

The unit will continuously monitor the

conductivity of the engine cooling water. In

normal operation the conductivity of the cooling

water is directly proportional to the content of

nitrite based corrosion inhibitor.

Automatic application of the corrosion inhibitor product is initiated to maintain the correct control level

within the system.

Features

• Continuous monitoring with automatic activation of chemical feed for assured system protection

• Onboard alarm feature to indicate potential contamination with sea water

• Low level alarm to indicate when chemical drum requires replacement

• Minimises the requirement for routine wet testing by ships staff

• Rugged, stainless steel construction for reliable operation in ship board environment

Benefits

• "Closed" dosing system improves health and safety by eliminating manual handling of chemicals



777735 NALTRAK 1000 CWT DOSING SYSTEM

600



NANALLTTRRAAK 17K 1750 B50 BWWT DT DOOSSING SING SYYSSTTEEMM

664 777736

The Naltrak 1750 chemical dosing system is a

packaged unit specifically designed for the

application and control boiler water treatment

programmes.

Automatic application of the chemical treatment

programme is initiated by a series of control

timers.

Features

• Timer controlled dosing

• Low level alarm to indicate when chemical drum

requires replacement

• Rugged, stainless steel construction for reliable

operation in shipboard environment



777736 Naltrak 1750, 2 dosing pumps

777737 Naltrak 1750, 3 dosing pumps

601



NANALLTTRRAAK 2000 BK 2000 BWWT DT DOOSSING SING SYYSSTTEEMM

664 777741

Naltrak 2000 is a packaged dosing unit

designed for the automatic application of boiler

treatment programmes. The unit measures feed

water flow and temperature and delivers the

required amount of treatment chemicals

proportionally.

Naltrak 2000 can be configured to suit the

number of chemicals in use and flow signal

required.

Features

• Continuous monitoring of boiler feed water flow and

temperature

• Chemical dosing in proportion to feed water flow and

temperature

• Robust construction

Benefits

• Improved healh and safety by eliminating chemical handling


Product number Description

777738 2 dosing pumps, Magphant flow meter and temp control

777739 3 dosing pumps, Magphant flow meter and temp control

777740 2 dosing pumps, flow signal and temp control

777741 3 dosing pumps, flow signal and temp control

602



DDOOSSING UING UNIT FNIT FOOR ER EVVAAPPOORRAATTOOR TR TRREEAATTMEMENTNT

664 656207

Easily installed dosing equipment for evaporator

treatment.

Features

• Compact unit with 60 litre storage tank

• Adjustable flow meter for dosage control

Benefits

• Improves dosing control through continuous dosing

• Reduced requirement for crew handling of the

products



656207 EVAPORATOR DOSING UNIT

• Pipeworks includes 5m PVC coil, fittings and valves

603



DDOOSSING UING UNIT FNIT FOOR BR BWWTT

Dosing unit for boiler water treatment 16 and 25

bar.

Features


• Electrical Metering Pump with available voltage 100 -

240 V

Benefits


• Reduced requirement for crew handling of the products

The standard dosing unit consists of:

• Electronic metering pump

• Dosing container

• Adjustable suction assembly, with float switch

• Dosing tube

• Injection valve assembly for hot systems, complete

with 1 m stainless steel pipe

Spare parts included:

• Diaphragm

• Complete O-ring set

• Pump inlet and outlet valves

• Pieces for tube connections



767922 DOSING UNIT FOR BWT 16 BAR

767923 DOSING UNIT FOR BWT 25 BAR

Accessories


683771 ALARM KIT FOR BETA PUMP

773184 SPARE DOSING PUMP FOR BWD 16 BAR

773192 SPARE DOSING PUMP FOR BWD 25 BAR

683706 SPARE KIT BETABOILER PUMP

604



SSEEA WA WAATTEER DR DOOSSING UING UNITNIT

664 767925

Dosing unit for sea water systems.

Features


• Electrical metering pump with available voltage 100 -

240 V

Benefits


• Reduced requirement for crew handling of the products



• Dosing container


• Dosing tube


with 1 metre stainless steel pipe



767925 SEA WATER DOSING STATION

Accessories


773226 SPARE DOSING PUMP FOR SWD

683714 SPARES KIT BETA SEAW.PUMP

605


Nalfleet Water Test KIts

SSPPEECCTTRRAAPPAAK 309K 309

661 739466

Cooling water test kit. Parameters: nitrite,

chloride & pH

Test recommended to maintain cooling water within the

prescribed limits.

Nitrite - Recommended Limits 700-2400 ppm as NO2. The

nitrite concentration should be maintained within the above

recommended limits to effectively inhibit any corrosive or

scaling action within a closed cooling system. Too high a

concentration should be avoided to minimize the cost to

maintain the system. Insufficient dosage can set up a

condition where accelerated corrosion can occur in areas

which become unprotected.

pH - Recommended Limits 8.3-10. The effectiveness of a

corrosion inhibitor is restricted to within a certain pH range.

Treatment ensures that this pH range is observed when the

nitrite level is sufficiently maintained to prevent corrosion.

Chlorides - Recommended limit max. 50 ppm. The chloride

value of the cooling water should be kept as low as possible,

any increase in value whether sudden or gradual, will be an

indication of sea water contamination. Check with engine

manufacturer for other specified limits. If the chloride level

exceeds 50 ppm, the possibility of corrosion in the system

increases because chlorides have a negative effect on the

passivation film created by nitrites. Therefore, until corrective

action has succeeded in bringing the chloride level back

down below 50 ppm, the nitrite level should be kept close to

the upper limit (2400 ppm).



739466 SPECTRAPAK 309

Accessories


Consumables:

739458 CHLORIDE TEST TABLETS

555623 NITRITE NO.1 TABLETS

555631 NITRITE NO.2 TABLETS

555698 PH PAPER F/ 309 TEST KIT

Spares

555714 SHAKER TUBE 309 TEST KIT

606




661 739474

Low pressure boiler water test kit. Parameters:

P-alkalinity, chloride & pH.

Test recommended to maintain boiler water within the

desired level of quality when treating with Liquitreat/

Combitreat are as follows:

A. p-Alkalinity - Recommended Limits: 100-300 ppm as

CaCO3

B. Chlorides - 200 ppm maximum as Cl-.

C. Condensate pH 8.3-9.0

D. Hotwell temperature > 80°C




Accessories


Consumables:


555664 P-ALKALINITY TABLETS

555706 PH PAPER + PH REAGENT


555557 SAMPLE BOTTLES 250ML

607




661 739482

Boiler Water Test Kit. Tests included are:

phosphate, P- alkalinity, chloride and pH. Please

note that oxygen scavenger testing is provided

separately (Spectrapak 312 for Hydrazine.

Spectrapak 313 for DEHA and sulphite test kit

for sulphite).

Accessories


Consumables:


555730 FILTER PAPER

555680 HYDRAZINE TEST POWDER

555599 MOULDED CELLS 10ML + CAPS (5 PACK)



555649 PHOSPHATE TABLETS


555581 HYDRAZINE DISC 3/126

555565 LOVIBOND 2000 COMPARATOR

555573 PHOSPHATE DISC 3/70


Accessories:



574913 SULPHITE TEST KIT

608




661 555490

Test reagent and comparator disc to test for

hydrazine based oxygen scavengers.

Recommended to ensure boiler water is free

from dissolved oxygen.

Features

• Compact, portable test kit

• Test method included in the kit

Hydrazine reacts with oxygen, acting as a scavenger. The

reaction results in nitrogen and water with no solids being

added to the boiler system. Some of the hydrazine will carry

over with the steam, aiding in maintaining the condensate

pH in an alkaline range, which thereby helps combat acid

formation. Hydrazine will also form magnetite which will act

as a protective layer against further corrosion. This test must

be performed below 21°C. A cooling coil should be fitted at

the sampling point or the sample should be cooled

immediately under cold running water. Cloudy samples

should be filtered before testing.




Accessories


555680 Hydrazine Reagent

555581 Hydrazine Disc 3/126

609




661 698746

Reagents and comparator disc for testing for

DEHA based oxygen scavengers.

Features

• Compact, portable test kit

• Test method included in the kit.

Controlling dissolved oxygen in boiler feed water and boiler

water is important to avoid pitting corrosion in boiler

systems. Oxygen Scavenger Plus contains DEHA, a low

toxicity oxygen scavenger that is distributed throughout the

boiler system. Dosage level of Oxygen Scavenger Plus is

based on the DEHA value of the condensate water.




Accessories


Consumables:

698761 DEHA TEST SOLUTION

698753 DEHA TEST TABLETS


698928 DEHA DISC 3/170

610




661 739490

Low pressure boiler water test kit. Parameters:

P-alkalinity, chloride and pH.

Compact portable boiler water test kit. Please note that

oxygen scavenger testing is provided separately (Spectrapak

312 for Hydrazine. Spectrapak 313 for DEHA and Sulphite

test kit for Sulphite).




Accessories


Consumables


555730 FILTER PAPER




568717 BEAKER 100ML AZLON

573048 FUNNEL

555565 LOVIBOND 2000 COMPARATOR

555599 MOULDED CELLS 10ML + CAPS (5 PACK)


573055 STIRRING RODS PLASTIC

Accessories:



574913 SULPHITE TEST KIT

611



MOMOTTOOR SR SHIP THIP TEESST KT KITIT

661 777066

Combined drop test kit for engine cooling

waters and low pressure boilers. Test

parameters are P Alkalinity, Chloride and Nitrite.

Benefits

• Compact and portable

• Suitable for LP boilers and engine cooling waters



777066 Motor Ship Test Kit

Accessories

Product number Product description

777124 P Alkalinity Indicator MPA1 (2x65ML)

777125 P Alkalinity Titrant MPA3 (2x65ml)

777050 Chloride Indicator MBC (2x65ml)

777051 Chloride Titrant MBC2 (2x65ml)

777121 Nitrite Indicator MN1 (2x65ml)

777122 Nitrite Titrant MN2 (2x65ml)

777049 Plastic syringe 2ml

777093 Plastic filter syringe 20ml

777094 Filter paper holder

777095 GFC Filter papers

778113 Titration Jar 40ml

612



BBOOILILEER PR PLLUUS TS TEESST KT KIT MOIT MO380380

661 777100

Combined drop test kit for engine cooling

waters and low pressure boilers. Test

parameters are P Alkalinity, Chloride and Nitrite,

Tannin and pH.

Features

• Compact and portable

• Suitable for LP boilers using tannin for corrosion

protection and engine cooling waters utilising a nitrite

based corrosion inhibitor

Accessories

Product number Product Description

777124 P Alkalinity Indicator MPA1 (2x65ML)

777125 P Alkalinity Titrant MPA3 (2x65ml)

777050 Chloride Indicator MBC (2x65ml)

777051 Chloride Titrant MBC2 (2x65ml)

777121 Nitrite Indicator MN1 (2x65ml)

777122 Nitrite Titrant MN2 (2x65ml)

777049 Plastic syringe 2ml

777093 Plastic filter syringe 20ml

777094 Filter paper holder


778113 Titration Jar 40ml

777987 Universal pH Indicator Solution

777988 Universal pH Chart

777101 Tannin Indicator Powder MTN1 2x50g

777102 Tannin Titrant MTN2 2x 56ml

613



SSUULLPPHITHITE DE DRROOP TP TEESSTT

661 777126

Drop test kit for the control of sulphite based

oxygen scavengers in boiler water treatment.

Accessories


777126 Sulphite Indicator Tablets 2 packs

777127 Sulphite Titrant 2x65ml

778113 Titration jar 40ml

614



NITNITRRITITE FE FUULLL KL KIT MOIT MO2248A48A

661 777067

Packaged drop test kit for nitrite. Suitable for

testing nitrite levels in engine cooling water

systems.



777067 NITRITE FULL KIT MO248A.

Accessories


777121 Nitrite Indicator (MN1 x 2 65ml)

777122 Nitrite Titrant (MN2 x 2 65ml)

778113 Graduated Titrator Jar (40ml)

777093 Plastic syringe (20ml)

615



PPH TH TEESST ST STTRRIPIPS 2 PS 2 PAACCK MOK MO319319

661 777068

pH test strips - range 0 to 14.

Features

• Rapid dip and compare method

• Popular choice for applications where speed and

simplicity are important.



777068 PH TEST STRIPS 2 PACK MO319.

TTOOTTAAL HAL HARRDDNENESSS TS TITITRRAATTIOION PN PAACCK M204K M204

661 777052



777052 Total Hardness Titration Pack M204

Accessories

Supplied with:

N/50 EDTA Solution 2x250mls

Ammonia Buffer Solution 1x250mls

Total Hardness Indicator Tablets 2x200

Dropper bottle for Ammonia Bubber Solution 1x65ml

616



AALLKKAALLINITINITY TY TITITRRAATTIOION PN PAACCK M250K M250

661 777055



77705 Alkalinity Titration Pack M250

Accessories

Supplied with:

N/50 Sulphuric Acid Solution 4x250mls

Phelolphthalein Indicator 2x65ml

CCHLHLOORRIDIDE TE TITITRRAATTIOION PN PAACCK M251K M251

661 777056



777056 Chloride Titration Pack M251

Accessories

Supplied with:

Silver Nitrate Chempac 4x250mls

Potasium Chromate Indcator 2x65ml

617



TTITITRRAATTIOION AN APPPPAARRAATTUUS PS PAACCK NO 1 MOK NO 1 MO217217

661 777063



777063 TITRATION.APPARATUS PACK NO 1 MO217

Accessories

Supplied with:

Automatic Burettes 3x10ml

Amber Galll Auto Burette 1x10ml

Burette Valves 1 pack

Stirring Rods 2x150mm

Polythene resevoir 1x250ml

TTITITRRAATTIOION AN APPPPAARRAATTUUS PS PAACCK NO 2 MOK NO 2 MO218218

661 777064



777064 TITRATION APARATUS PACK No. 2 MO218

Accessories

Supplied with:

Plastic Measuring Cylinders 2x25ml

Plastic Measuring Cylinders 1x50ml

Plastic Measuring Cylinder 1x100ml

Graduated Pipette 1x10ml

Stirring Rods 2x150mm

Porcelain Casserole 2x175ml

Filter Funnel 1x90ml

618

FFILILTTEER PR PAACCKK, 1 C, 1 CAARRDDBBOOAARRD BD BOOX MOX MO213213

661 777062



777062 Filter Pack 1 MO213

Accessories

Supplied with:

5 Boxes Whatman Filter Papers No. 1 15cm diam.

1 Box Whatman Filter Papers No. 6 15cm diam.

EECCOOSSCCAAN PN PH6 MEH6 METTEER & ER & ELLEECCTTRROODDE MOE MO348348

661 777080

Multi-Point Calibration (up to 3 points) with

Auto-Buffer Recognition and pure water buffer

standards with ±0.01 pH accuracy

Features

• Automatic Temperature Compensation (ATC) for the

highest accuracy under fluctuating temperatures

• Hold Function momentarily freezes reading for easy

viewing and recording

• Auto-Power Off saves battery power after non-use

• Large Custom LCD provides optimum viewing even at a distance

• Protective rubber boot shields from accidental knocks has a sturdy built-in stand for easy bench-top operation



777080 Ecoscan pH Meter

Accessories


777098 Spare pH eletrode and lead

777152 Spare Temperature probe and lead

777087 pH7 Buffer Solution 125ml

777088 pH10 Buffer Solution 125ml

619



EECCOOSSCCAAN CN COONDNDUUCCTTIVIVITITY MEY METTEER MOR MO343477

661 777079

Ecoscan conductivity 6 TDS meter and probe.

Compact, portable meter for testing boiler

water, condensate water and engine cooling

water.

Features

• Multi-point push-button calibration (up to 5 points)

with ±1% full scale accuracy

• Automatic or manual calibration - for quick, easy

calibration; use automatic mode with preset

calibration points at most popular values or manually

set values in the manual mode for more flexibility

• Automatic temperature compensation (ATC) for the optimum accuracy under fluctuating temperatures

• Hold function momentarily freezes reading for easy viewing

• Auto-power off saves battery power after non-use

• Protective rubber boot shields meter from drops and features a sturdy built-in stand for easy bench-top operation



777079 Ecoscan Conductivity Meter

Accessories


777091 Spare Conductivity probe

777089 Acetic Acid Solution 65ml

777124 P Alkalinity Indicator MPA1

777090 Std. Conductivity Solution

620



MAMAXXIDIDIRIREECCT PT PHOHOTTOOMEMETTEERR

661 777180

A hand held spectrophotometer that can be

used to produce a wide range of accurate water

tests. This instrument offers a unique ability in

that it can be used, dependent upon parameter,

with liquids, powders, tablets, or powder

sachets. It operates a six filter system for

greater accuracy and uses a LED light source,

keeping power consumption low.

Features

• Uses tablets, powder packs, liquids or vials

• Wide range of test parameters

• Reproducible results

• Results displayed as ppm (mg/l)



777180 MaxiDirect Photometer

Accessories


777179 Chloride test pack 0 to 32ppm (100 tests)

777181 Phosphate test pack 0 to 80 ppm (100 tests)

6006393 Hydrazine test pack 0 to 0.6ppm (50 tests)

777182 Iron test pack 0 to 2ppm(100 tests)

777183 Copper test pack 0 to 1ppm (100 tests)

777184 Silica test pack 0 to 1.6ppm (50 tests)

777185 Ammonia test pack 0 to 1ppm (50 tests)

729541 Hardness test pack

698753 DEHA tablets

698761 DEHA test solution

729574 Dissolved oxygen vials

621



CCHLHLOORRINE CINE CHEHECCKKIT BIT BLLOOCCK 0K 0..2-2-8 P8 PPPMM

661 777073

Simple comparator type test kit for testing for

free chlorine. Suitable for testing potable water,

waste water and pool and spa water on the

ship.

Accessories


Free chlorine DPD No. 1 Tablets 630293

OOXXYYGGEEN FN FUULLL KL KIT 0-IT 0-40 P40 PPPM OM O2 M342 M3411

661 777060

The ampoule to be placed into the sample. The

correct amount of sample goes into the

ampoule and this ensures the test to be

performed quickly and accurately. Kit comes in

a cardboard box and contains everything

needed to perform 30 tests.

Features

• Premade reagent vials

• Vacuum sealed ampoules



777060 OXYGEN FULL KIT 0 to 40ppb

Accessories


777059 Replacement Oxygen Ampoules (0 to 40ppb)

622



LLEEGGIOIONENELLLLA TA TEESST KT KITIT

661 777722

The Nalfleet Industrial Legionella Test Kit is a

quick and effective kit to deliver microbiological

results in minutes instead of days. The test kit is

a compact kit delivered in a case with easy and

clear instructions.

The Nalfleet Industrial Legionella Test Kit uses

an immunochromatographic assay to detect the

presence of cell surface antigens from

Legionella bacteria in a sample. The presence of

antigen causes the “Test Line” to turn red.

The kit contains all the items required to performe 5 tests –

including filters, recovery buffer, collection vessel and sample

point.

Accessories


Legionella Test Kit 777722

623

PPOOTTAABBLLE WE WAATTEER TR TEESST KT KITIT

661 777720

The Nalfleet Potable Water Test Kit is designed

to enable routine testing of potable water stored

and used on board the ship. The crew can

effectively monitor and control the quality of the

potable water network and reduce the risk of

possible contamination by bacteria proliferation.

Features

• Self contained testing kit, no training required

• Test for E coli, coliforms, total bacteria, free chlorine and pH

• ILO178/WHO/IMO/HPA/APHA compliant

• Simple to operate

• Compact & portable

Diseases on board ships

Improperly managed water is an established route for

infectious disease transmission on ships. This was illustrated

in a review of more than 100 outbreaks associated with

ships undertaken by Rooney et al. (2004). One fifth was

attributed to a waterborne route.

WHO “Guide to Ship Sanitation” (Third Edition)

“A ship operator’s role is to provide safe water to passengers

and crew, fit for all intended purposes. Water on board

should be kept clean and free from pathogenic organisms

and harmful chemicals. Responsibilities are to monitor the

water system, particularly for microbial and chemical

indicators, to report adverse results under the IHR 2005,

where required, and to take corrective action”.

ILO178

The International Labour Organization (ILO) is the United

Nation’s body responsible for drawing up and overseeing

international labour standards. ILO178 defines international

standards for working and living conditions on board ship.

ILO178 references a number of guidelines, including the

WHO Guide to Ship Sanitation, for potable water testing

requirements and frequencies.



777720 POTABLE WATER TEST KIT FULL VERS...

Accessories


777932 E.COLI/COLIFORM TEST SET(100 TEST).

777933 HPC TEST SET (40 TESTS)

777934 CHLORINE DPD NO.Z(FREE)(250 TESTS..

777935 CHLORINE DPD NO.3(TOTAL)(250 TESTS)

777936 PHENOL RED(PH) (250 TESTS)

777937 ACIDIFYING GP TABLETS(CHLORINE)

777938 POTASSIUM IODIDE TABLETS (CHLORINE.

624



LLOOVVIBIBOOND 2000 CND 2000 COOMPMPAARRAATTOORR

661 555565

A compact, versatile colorimiter. Suitable for a

wide range of chemical tests.

Spare part for water test kits.



5555565 Lovibond 2000 Comparator

Accessories


777096 Lovibond Comparator

777090 Lovibond Glass Cell 2x10ml

777177 Lovibond Light Source

777084 Phosphate Disc 0 to 20ppm

777071 Phosphate Disc 0 to 100ppm

777082 Hydrazine Disc 0 to 0.5ppm

777069 Comparator light source and spare cells

777093 20 ml Filter syringe

777094 GFC Filter paper holder


777085 Combined phosphate reagent

777086 Ascorbic acid tablets

625



TTEESST KT KIT CIT COOOOLLTTRREEAAT AT AL WL WITITH CH CL TL TEESSTT

661 758904

Cooling water test kit. Parameters: Cooltreat AL

concentration, chloride & pH

Accessible sampling cocks should exist on all cooling

systems for each diesel engine. This including, but not

limited to, main jacket water, piston cooling, fuel oil valve,

auxiliary engines, low temperature systems, etc. A

representative sample must be taken from each cooling

water system to be tested. To minimize the effort in obtaining

cooling water samples, a sample cock located in a position

to draw a sample/having access to draw the sample quickly

and easily, will make the task of drawing samples simple.

Before taking the sample the sampling line if present, should

be thoroughly flushed with cooling water to ensure a

representative sample is used for testing. In each case of

drawing a sample, the container should be filled with the

water to be tested, sealed and labelled. It is advisable to

conduct the appropriate tests within 30 minutes of drawing

the sample, although this time limit can be extended when

the sample container is completely filled and sealed.



758904 TEST KIT FOR COOLTREAT AL...

Accessories


735738 COOLTREAT SHAKER TUBE 50ML

735761 COOLTREAT CONSUMABLES REP PACK

555698 PH PAPER F/ 309 TEST KIT

735746 COOLTREAT REAGENT REP PACK

626


Unitor Cleaning and Dosing Equipment

FFUUEEL OL OIL TIL TRREEAATTMEMENT DNT DOOSSING UING UNITNIT

664 767924

Fuel Oil Treatment Dosing Unit



• Dosing Container


• Dosing tube


with 1 metre stainless steel pipe



767924 FUEL DOSING STATION

Accessories


683722 SPARES KIT BETA FUEL PUMP

670133 SPAREKIT GAMMA FUEL PUMP

683771 ALARM KIT FOR BETA PUMP

627



AAUUTTOOMAMATTIC DIC DOOSSING FING FOOR SR SOOOOT RT REEMOMOVVEER LR LIQIQUUIDID

664 767926

Soot and exhaust deposits greatly reduce

efficiency and can ultimately lead to boiler

failure. Effective control of those deposits will

ensure reliable boiler operation. The Automatic

Dosing Unit gives you full control at the touch of

a button.

Features

• Provides automatic dosage of soot remover

treatment

• Automatic shut-off when temperature becomes low

• All in one unit with programmable pump

Benefits

• Trouble free operation, no need for you to worry if the dosage is being done

• No risk that the product will be dosed when the engine is not in operation or at optimum temperature

• Compact unit that doesn't waste valuable space for you

The automatic soot remover unit can be programmed to

meet all dosing requirements. The unit injects Soot Remover

Liquid as a fine mist into the exhaust through a nozzle.

Atomisation of the chemical is air assisted. The atomised

Soot Remover Liquid is quickly evaporated and reacts with

the unburned hydrocarbon which is burned into a dry ash.



767926 AUT .DOSING UNIT FOR SOOT REMOVER L

Accessories



628



MAMANUNUAAL DL DOOSSING UING UNIT FNIT FOOR SR SOOOOT RT REEMOMOVVEERRLLIQIQUUIDID

664 625194

Equipment for the injection of Soot Remover

Liquid into the exhaust ducting.

The product is finely dispersed and prevents the build-up of

soot and fire scale in the exhaust system and exhaust boiler.

The installation and operation is fully described in the

installation instructions. For dosages of Soot Remover Liquid

please refer to the Product Data Sheet no. 815838



625194 MANUAL DOSING UNIT F/SRL

Accessories



629



PPOORRTTAABBLLE SE SOOOOT RT REEMOMOVVEER INJR INJEECCTTOORR

664 572065

Equipment for blowing soot remover powder

into boiler fire-side or into the gas side of

exhaust gas boilers. This simple, low cost

injector ensures rapid and effective dosing of

powder so that soot and firescale may be

removed most efficiently.



572065 PORTABLE SOOT INJECTOR

Accessories



630



FFIXIXEED SD SOOOOT RT REEMOMOVVEER INJR INJEECCTTOORR

664 572073

Equipment for blowing soot remover powder

into boiler fire-side or into the gas side of

exhaust gas boilers. This simple, low cost

injector ensures rapid and effective dosing of

powder so that soot and firescale may be

removed most efficiently.



572073 FIXED INJECTOR

Accessories



631



CCHEHEMICMICAAL CL CLLEEAANING UNING UNITNIT

664 737189

The Chemical Cleaning Unit is a portable

integral unit comprising mixing tank with lid,

airdriven double diaphragm 1050 pump, hoses,

heating element and connections.

Designed for use with acid and caustic based products for

descaling boilers, calorifiers, heat exchangers and other

types of equipment where rust and scale form. It is also

ideally suited for degreasing or decarbonising contaminated

systems.

The Chemical Cleaning Unit can be used in conjunction with

the following Unitor chemicals:

• Descalex

• Descaling Liquid

• Disclean

• Metal Brite H.D.

• Seaclean

• Coldwash

• Enviroclean

• Alkleen Liquid

• Aquabreak PX

• Carbonclean

• ACC Plus

• Air Cooler Cleaner

• Carbon Remover

• Electrosolv-E

• Aquatuff

• Seaclean Plus

• Commissioning Cleaner

• Ultra CIP




632



JJEET ST SPPRRAAY UY UNIT 10 L SNIT 10 L STTEE

664 572099

The Jet Spray Unit is ideal for applying Unitor

electrosolvents, degreasers, and cleaning

chemicals. The Jet Spray Unit is supplied

complete with Instantaneous Control Lance,

Cone Spray Nozzle, Charge Pump, Pressure

Gauge and Relief Valve (set to operate at 6 bar).

Features

• 10 L tank with carrying strap

• Spray gun and flexible hose

Benefits

• Ergonomic application of chemicals

• Safe to operate

• Fast to pressurize

• Easy to apply pre-mixed dilution



572099 JET SPRAY UNIT 10 LTR STEEL

JJEET ST SPPRRAAY UY UNIT 10 L SNIT 10 L STTAAINLINLEESSS SS STTEEEELL

664 572123

The Jet Spray Unit is ideal for applying Unitor

Electrosolvents, Degreasers, and cleaning

chemicals. Supplied complete with

Instantaneous Control Lance, Cone Spray

Nozzle, Charge Pump, Pressure Gauge and

Relief Valve (set to operate at 6 bar).



572123 JET SPRAY UNIT 10 LTR ST.ST.

633



RREECCHAHARRGGEEAABBLLE SE SPPRRAAYYEERR

The sensible alternative to aerosols, using

compressed air instead of CFC propellants.

Features

• Environmentally safe

• Rechargeable

• Easy to maintain

• Versatile

• Economical

Suitable for Unitor products such as

• Enviroclean

• Fore and Aft

• Coldwash HD

• Uniwash

• Electrosolv-E

• Aquabreak PX

Extension piece and different nozzles available:

Pin stream

Solid pin stream pattern. For applications where ”splash”

coverage is preferred or deeper penetration is required (such

as penetrating oil, lubricating oil, insecticide, etc. Ideal for

distant or inaccessible areas. Effective range up to 20 feet.

Product no.664 572206

Fine mist

Solid cone pattern, fine density. For use with lighter liquids

and applications that require extra uniformity such as mold

release agents and dry cleaning fluids. Product no. 664

572214

Rigid 6-inch, extension piece

Product no. 664 572230



572172 RECHARGEABLE SPRAYER

572156 RECHARGEABLE SPRAYER

634



SSPPRRAAY GY GUUN 1 LN 1 L

664 592568

The Unitor Spray Gun has been designed for

efficient spraying of Unitor's range of

electrosolvents and solvents degreasers. The

adjustable nozzle allows for easy adjustment of

the fluid discharge from a fine spray to a solid

jet.



592568 SPRAY GUN 1 LTR

SSYYPPHOHON SN SQQUUEEEEZZEERR

664 572024

The Syphon Squeezer has been developed to

avoid cleaner spillages. An easy way to transfer

products from a container to another.

Features

• Easy to use

• Practical when transfering products



572024 SYPHON SQUEEZER

635


Unitor Fuel Oil Test Kits

EEAASSY SY SHIP CHIP COOMBMBINEINED OD OIL TIL TEESST KT KITIT

663 773154

Supplied ready for use - in durable ABS cases -

Unitors multi-parameter DIGI Combined Oil Test

Kit contains all of the necessary equipment and

consumables for oil condition monitoring needs.

The DIGI Combined Oil Test Kit from Unitor

comes complete with tests for Water in Oil, Total

Base Number (TBN), Salt, Insolubles and a

Viscosity comparison test.

Features

• Water in oil test

• TBN test

• Insolubles test

• Salt water determination test

• Viscosity comparison test

• All necessary reagents and consumables

• Practical and clear instructions provide guidance and

interpretations of test results for the complete range

of tests

Benefits

• Fast, accurate and reliable oil test results

• Multiple oil parameters in an easy to use, portable oil analysis kit

• Make informed on-site maintenance decisions

• Act before the onset of critical failure

• Robust and reliable for use in harsh or remote environments



773154 UNITOR EASYSHIP COMBINED TEST KIT

Accessories


Consumables:

773156 UNITOR EASYSHIP REAGENT PACK WATER

602805 WATER IN OIL REAGENT

632406 TBN REAGENT PACK


773158 UNITOR EASYSHIP UPGRADE PACK COMB

636



EEAASSY SY SHIP WHIP WAATTEER IN OR IN OIL TIL TEESST KT KITIT

663 773155

Maintain and protect equipment, whilst

eliminating damage caused by water in oil. With

an easy to read digital display providing

instructions and water in oil test / analysis

results, a five year (10,000 tests) battery life and

built in memory for recording previous test

results, Unitor DIGI Water in Oil Test / Analysis

Kits have become a favoured test method

worldwide for onsite and onboard testing.

Using this cell the DIGI Water in Oil Test Kit

provides state of the art, digital analysis and

gives fast, accurate results for easy monitoring

of trends.

Features

• Reliable test for water content: 0-1%, 0-10% or

0-10000ppm

• Short testing time: 3 min

• Good accuracy

• Reagent packs available worldwide

Benefits

• Eliminates damage caused by water in lube oil which will rapidly cause severe damage to an engine, bearing or

hydraulic system

• Prevents corrosion, cavitation or failure of machinery by detecting water in oil, before any damage occurs

• Minimises instability of additive packages and damaging microbe growth by monitoring oil

• Fully portable for use onboard or in the field, test cells are extremely robust, durable and easy to use



773155 UNITOR EASYSHIP WATER TEST KIT

Accessories


Consumables:




773157 UNITOR EASYSHIP UPGRADE PACK WATER

637



TTBBN TN TEESST KT KITIT

663 773150

The Unitor TBN (Total Base Number) Test Kit is

a major advance in portable tests for oil

alkalinity.

Features

• TBN digital cell

• 100 mL plastic beaker

• 10 mL disposable syringe

• Disposable plastic gloves

• TBN reagent pack

• Manual TBN test kit

Benefits

• Easy to use

• Reliable result in a few minutes

• One reagent only (patented by Unitor)

• Non-toxic and non-flammable

• Simple cleaning with water after use

The kit gives results for crankcase and other lubricants in a

very short time, normally about 5 minutes. Designed for

testing lubricants with TBN up to 60. The results may be

used as an in-service check of depleting TBN to the

equilibrium value.



773150 UNITOR TBN TEST KIT

Accessories


Consumables:


Spares parts available for purchase:

632430 ELECTRONIC REACTION CELL

638



CCOOMPMPAATTIBIBILILITITY TY TEESST KT KITIT

663 773153

The Unitor Oil Compatibility Tester is possibly

the most useful and underrated tool available for

testing fuel oils. This kit provides a quick and

extremely useful tool for engineers faced with

the necessity to mix or blend residual fuel oil.

Features

• Small and compact

• Completely portable

• Specifically designed for onboard use

• Complete with guide on methods to prevent sludging

Benefits

• Completely portable

• Results can be used to determine if pre-combustion

additives are required and to assess dose rate

• Easy to use

• Fast - less than five minutes operator time

• No reagents, no glassware, disposable sample

containers and no cleaning

• Confirm that the fuel delivery will remain stable in the

bunker tanks

• Identify possible stability problems before mixing two

fuels

• Help prevent sludge deposits, failure of fuel handling systems and costly combustion related engine damage



773153 UNITOR COMPATIBILITY TEST KIT

Accessories


Consumables:

555771 COMPATIBILITY SAMPLE TUBE

555789 COMPATIBILITY TEST PAPER

639



HEHEAATTEED VD VISISCCOOSSITITY MEY METTEERR

663 773151

Small, fast and reliable. Measurements without

heating (but corrected to 40°C) or heated to

40°C for lube oil viscosity and to 50°C for fuel

oil viscosity.

Features

• 110-240 V AC

• Reports directly in cSt, repeat reading in one minute

• Calculation of Calculated Carbon Aromaticity Index

(CCAI)

• Clear and comprehensive user instructions

• Correct density from 50°C. to kg/m3 @ 15°C in

vacuo

Benefits

• Monitors changes in lubricating oil viscosity,

preventing costly engine and machinery failures

• Verifies correct fuel grade or blend has been

delivered

• Checks that fuel viscosity is acceptable for storage,

pumping and purifiers

• Estimates the combustion performance (CCAI) of fuel

oil

The Heated Oil Viscometer is suitable for measuring both

fuel oil viscosity & lube oil viscosity from a wide variety of

applications including diesel engines, gas and aviation

turbines, gear boxes, hydraulics and fuel oils.

Testing fuel oil viscosity is important for verifying the correct

grade of fuel is delivered, for calculating combustion

performance, plus adjusting of fuel handling and injection

systems. Viscosity of lube oil is the most important property

with the correct viscosity providing optimum film strength in

system clearances, with minimum friction losses and

leakage.



773151 UNITOR HEATED VISCOSITY METER

640



DDEENSNSITITY MEY METTEERR

663 773152

A fast and reliable device to accurately

determine the density of fuels from 800-1010

kg/m3 @ 15 °C (ISO Fuel Grades DMA to RML

55). Allows rapid determination of exact bunker

delivery quantities.

Features

With information and the viscosity of the fuel, the Density

Meter can determine:

• Mass of fuel delivered

• Calorific value

• Calculation of density at 15 °C in vacuo

• centiPoise to centiStoke

• CCAI (Calculated Carbon Aromaticity Index)

• Clear instructions

• 110-240 V AC

• Easy to use with quick results

• Easy to clean

The Density Meter measures diesel and residual fuel density

and confirms the quantity of fuel delivered, verifies that the

correct grade of fuel has been delivered and estimates the

combustion performance (CCAI), correct viscosity in cP to

cSt.

The Density Meter measures fuel density using a hydrometer

dropped in warmed oil. Most oils can be measured at 50 ºC

but for very viscous fuels and diesels the units can be set to

warm to 70 ºC. There is a calculator feature, which allows

the reading to be adjusted to show density at 15 °C in a

vacuum. If the diesel and fuel viscosity is known in

centiStokes or centiPoise the calculator will display the

CCAI. The Density Meter uses Hydrometers to measure the

fuel density and marine diesel's density corrected to kg/m3

at 15 °C.



773152 UNITOR DENSITY METER

Accessories



632554 HYD 800-1.010

632521 HYDROMETER HYD900-1.010

632513 HYD 850-950

641



FFUUEEL OL OIL TIL TEESST CT CAABBINEINETT

663 607820

A new design, microprocessor controlled, easy

to use, fast and accurate electronic instrument

to determine the viscosity of lube oil at ambient

temperature but corrected to 40°C, or heated to

the standard temperature of 40°C. Also

performs viscosity measurement of Intermediate

Fuels heated to 50°C. Estimation of the

combustion performance, Calculated Carbon

Aromaticity Index (CCAI).

Reports directly in cSt, repeat reading in one minute.

Benefits

• All equipment is contained in a robust, metal case that is fully lockable for safe and secure sample storage.

• Certified by Germanischer Lloyd, providing everything you need to ensure that your fuel samples are compliant with

IMO MARPOL 73/78 Annex VI regulations.

• Replacement consumables and a full range of bunker samples are easily available through our network.



607820 THE FUEL OIL TEST CABINET

Accessories


Consumables:





773158 UNITOR EASYSHIP UPGRADE PACK COMB

632414 ELECTRONIC REACTION CELL

632521 HYDROMETER HYD900-1.010

632513 HYD 850-950

632554 HYD 800-1.010

625756 SALT WATER DETERM. TEST

625749 INSOLUBLES TEST KIT

642



INSINSOOLLUUBBLLEES TS TEESSTT

663 625749

Insolubles contamination usually comes from

combustion and mainly in the form of unburned

hydrocarbon. High insolubles loading will cause

laquering and other undesirable effects like

stiction and increased wear.

Features

• 1 pc bottle 100 mL

• 1 pc bottle cap

• 1 pc plastic stirring rod

• 1 pc drop bottle label

• 100 pcs chromatography papers

• 1 pc large module box

• 1 pc test kit manual



625749 INSOLUBLES TEST KIT

SSAALLT WT WAATTEER DR DEETTEERRMINAMINATTIOION TN TEESSTT

663 625756

A simple qualitative test to verify if there is salt

water contamination.

Features

• 1 pc salt test pads

• 4 pcs pipette disposable 1 mL

• 1 pc test tube

• 1 pc disposable syringe 5 mL

• 1 pc white closure

• 1 pc reagent

• 1 pc large module box

• 1 pc test kit manual



625756 SALT WATER DETERM. TEST

643



BBUUNKNKEER SR SAAMPMPLLEERR

The most common and economic means of

obtaining a representative sample is by using a

drip type Bunker Sampler. In back to back tests

performed by a major fuel testing laboratory,

samples obtained by drip samplers were

identical to those from more expensive

automatic fuel samplers.

Features

• Lloyds Register approved and manufactured under

strict ISO 9001:2000 quality assurance standards

• IMO MARPOL 73/78 Annex VI compliant - helps you stay within the legal requirements for bunker sampling

• Lightweight and very easy to install - obtaining a representative sample is quick and easy

Benefits

• Complies with current regulation



606252 BUNKER SAMPLER 3 INCH









Accessories


606265 5 LITRE CUBITAINER, 24 PACK

757252 CASE OF 70 SAMPLE BOTTLES

757245 SAMPLE BOTTLE MAILER KIT

606262 SAMPLER VALVE COVER PSA

644



PPLLAASSTTIC SIC STTOORRAAGGE CE CAABBINEINETT

663 773159

An affordable and versitile storage cabinet. The

cabinet has reinforced doors and back plate

and can easily be mounted on the wall via the

four mounting holes on the back plate.

The cabinet comes empty with a middle shelf but there are

accessories that can be added to make the cabinet more

practical. A padlock can be added and used to lock the

cabinet when samples are stored in the cabinet. If the

cabinet is used for storing Unitor Fuel Oil Test Kits and extra

tray pack can be added for storing loose items easier in the

cabinet.



773159 TEST KIT STORAGE CABINET

645

�� 14-�� !" "# ��, �� %+��& �'�14-&��$�(��)�'*

�� 14-�� !" "# ��, �� %+��& �'�14-&��$�(��)�'�

SAFETY

FIRE PROTECTIONPERSONAL SAFETY

LIFE SAVINGMEDICAL

ENVIRONMENTAL

SAFETY SERVICES

WSS has over 40 years’ experience in the provision of inspection, reporting, maintenance & repair for fire and safety systems and equipment for the maritime industry. Our highly experienced, fully trained service personnel work from Class-Approved WSS Service Stations situated in 47 countries and are on hand 24/7, 365 days a year to manage your onboard fire and safety service requirements.

All WSS Service Stations are approved to ISO9001: 2008 and operate in accordance with IACS UR Z17 approvals. In addition, we have global approvals from six major Classification Societies; DNV, Lloyds, Korean Register of Shipping, RMRS, RINA and GL as well as a number of local class approvals.

Our skilled technicians are trained to ISO and approved international standards to carry out servicing on a complete range of multi-brand fixed firefighting systems and firefighting and safety equipment.

�� 14-�� !" "# ��, �� %+��& �'�14-&��$�(��)�'2

SAFETY SERVICES SAFETY

SAFETY SERVICES Our StationsOur customers have access to almost one hundred

ISO9001: 2008 approved global service stations, each

equipped with state of the art test equipment and

operating in accordance with IACS, UR, Z17 approvals and

governance. This ensures that a consistent service standard

is achieved during a variety of services.

Our PeopleVessels are serviced by experienced WSS multi-brand

service technicians, all of whom have been trained through

the Wilhelmsen Service Academy and various OEM

centres, where focus is concentrated on the servicing

and maintenance of marine firefighting systems and the

requirements of IMO, SOLAS and the FSS Code. This

unrivalled training programme ensures the highest global

standards.

Our History WSS has experience of working with a vast range of multi-

brand safety systems and equipment, built up over almost

four decades as a market leader in the fire and safety service

sector.

Our CommitmentWe are committed to providing the highest ethical and

technical standards of safety service and expertise to our

global customer base and we work to ensure that our

customers’ vessels and crew remain compliant and safe at

all times.

Our OfferWSS’s global governance standards and local port coverage

enable us to provide flexible solutions tailored to suit a range

of requirements – from single vessel services to full fleet

management. We work across ports internationally, saving

our customers’ time and money, and allowing them peace of

mind.

Our Service Tools Whilst it is imperative to have the best tools for the job

onboard, we understand the importance of the best IT tools

onshore too. Every service that we complete is recorded

in our unique safety management system which is used

for safety service planning and the recording of a vessel’s

technical details, service intervals, due dates, service history,

regulations and certificates.

Our Service AgreementsFor over a decade, our customers have enjoyed the benefits

and flexibility of WSS’s unique Safety Service Agreements.

Whether a Fixed Price Agreement or full Safety

Management Contract, the benefits include a predictable

pricing schedule and a dedicated technical service

coordinator who monitors vessel due dates and schedules

servicing to take place in the most convenient ports.

Customers are also given access to Navigate, a unique online

portal which allows direct access to upcoming due dates, real-

time service information and technical equipment details as

well as the ability to print past and present service certificates.

Liferaft Raft Exchange Programme (LRE) WSS’s market-leading global Liferaft Exchange

Programme (LRE) exchanges out of date liferafts for

re-serviced operational ones, allowing customers to take

better control of costs, increasing operational efficiency by

minimising vessels’ time during port stay and ensure that

their vessels remain fully compliant. Customers are informed

when liferafts are due for annual service and they are then

exchanged at any agreed port in any one of our Liferaft

Exchange centres around the world. Since its launch, the

LRE concept has proved to be a market shaper, and is fast

replacing traditional liferaft ownership.

Our Service Capabilities Every 20 minutes, a WSS service technician begins work

on a new task and we complete more than 21,000 services

annually on all makes and models of fire and safety systems

and equipment.

�� 14-�� !" "# ��, �� %+��& �'�14-&��$�(��)�'�

SAFETY SERVICES SAFETY

�� --�� !" "# 6 �� !��( �� %��& �'��--&��$�(��)�'*

�� --�� !" "# 6 �� !��( �� %��& �'��--&��$�(��)�'�

SAFETY


LIFE SAVINGMEDICAL

ENVIRONMENTAL

FIRE PROTECTION

Keeping crew and passengers safe is the number one priority whilst at sea. WSS offers a wide range of fire protection equipment, accessories and spares, including fire extinguishers, hoses, fire system products, smoke detectors and appropriate storage.

All of our safety products are compliant with varying local regulations and international standards and offer cost-efficiency, ease of use and above all, peace of mind. Furthermore, they are supported by WSS’s global service network.

SSAAFFEETTYY Fire Extinguishers

Cabinets for Extinguishers and Fire Blankets

CCAABBINEINET FT FOOR FR FIRIRE EE EXXTTINGINGUUISISHEHER 6 TR 6 TO 9 KO 9 KGG

295 766827

This top of the range cabinet allows you to store

any type of fire extinguishers ranging from 6 to 9

kg.

They are manufactured from PE, an

environmentally friendly product, and you can

fully recyclable them.

Features

• Polycarbonate windows

• Can be wall of floor mounted

• Plastic hinges and door catch

• Rubber door seal for additional protection

Benefits

• Windows allow equipment to be checked quickly without removing it

• You can wall or floor mount these cabinets to suit your storage availability

• The plastic hinges and door catch give a longer life than traditional steel

• The rubber door seal gives you additional protection against moisture and dusts

Technical data

Length 700 mm

Width 300 mm

Height 255 mm

652



CCAABBINEINET FT FOOR FR FIRIRE EE EXXTTINGINGUUISISHEHER 5 TR 5 TO 9 KO 9 KGG

294 723064

This fire extinguisher cabinet gives you storage

for a wide range of extinguisher sizes in a tough

red polystyrene box with quick and easy

opening.

It is impact resistant making it ideal for external

storage in busy places.

Features

• For all 6 to 9 kg powder and water extinguishers,

and 5 kg CO2 extinguishers

• Simple push button opening

• 316L marine grade hinges and rivets

• Impact resistant and anti UV treated

Benefits

• You can standardise your storage for most extinguishers on board your vessels

• It is impact resistant, has anti uv protection and is impervious to rain and spray cleaning so you can store externally in

busy places

• Hinges and locks are 316L standard for effective resistance to saline and chemical corrosion giving you long product

life

• It is protected by dated, identified lead seal which you can quickly and easily break in an emergency

Technical data

Length 700 mm

Width 300 mm

Height 255 mm

653



FFIRIRE BE BLLAANKNKEET 120 X 180 CT 120 X 180 CM WM WAALLLL-MO-MOUUNTNTEEDD

394 756130

Our new fire blanket is specifically designed and

manufactured to new European standards for

fire blankets.

When you remove it from the container you can

either use as a shield for protection or for

placing over the flames to smother them.

Whether wrapping around a burinng person to

smother flames or moving a hot item, the Unitor

fire blanket offers high versatility of use.

Features

• Highly visible

• Tough outer cover

• Easy to deploy

Benefits

• Multiple use applications from smothering flames to offering you protection

• Wall hanging cover makes it available when you need it

• Other sizes available on request

654


Portable Extinguishers Cartridge Operated

PPOOWWDDEER ER EXXTTINGINGUUISISHEHER 12 KR 12 KG AG ABBC WC WITITHOHOUUTTBBRRAACCKKEET - PT - P12P M1812P M18

291 766994

Unitor’s range of fire extinguishers offers you

higher fire ratings, higher fire fighting capability

and increased levels of user safety.

Features

• Higher fire ratings

• High levels of monoammonium phosphate for fire

fighting even on electrical fires up to 35 kV

• High quality material and finish

Technical data

Capacity 12 Kg

Min discharge range 4 Mtr

Test Pressure 26 Bar

Working Pressure 14.2 Bar

Weight Empty 7.8 Kg

Weight Full 19.8 Kg

Height 730 mm

Diameter 180 mm

Fire Rating 55A-233B-C

Operating temp range -30 C to +60 C

Benefits

• Higher fire fighting capabilities meaning quicker and

safer fire fighting

• Integrated flow control valve at the hose end equips

you with a direct and better control to fight fire

• Our higher than normal industry standard burst

pressure for the cylinder and hose safeguards you

when fire fighting

• A long life and low maintenance costs are assured as

our extinguishers are manufactured from 2 mm thick

steel, shot blasted, and polyester coated with a non-

rusting safety pin



766993 Extinguisher powder 12Kg with marine bracket

711416 Marine bracket

668251 CO2 cartridge

668319 ABC powder 12Kg

Approvals

This fire extinguisher is certified according to Directive 96/98

EC on Marine Equipment as well as Russian Maritime

Register of Shipping and China Classification Society.

655



PPOOWWDDEER ER EXXTTINGINGUUISISHEHER 9 KR 9 KG AG ABBC WC WITITHOHOUUTTBBRRAACCKKEET - PT - P9P M189P M18

291 766990


higher fire ratings, improved fire fighting

capability and increased levels of user safety.

Features



fighting even on electrical fires up to 35 kV


Technical data

Fire rating 43A/233B/C

Capacity 9 Kg

Min discharge Range 4 Mtr

Burst disc pressure 26 Bar

Working Pressure 15 Bar

Weight Empty 6 Kg

Weight Full 15 Kg

Height 640 mm

Diameter 180 mm

Operating temp range -30 C to + 60 C

Benefits

• Improved fire fighting capability meaning quicker and

safer fire fighting





when fire fighting


our extinguishers are manufactured from 2mm thick


rusting safety pin



766989 Extinguisher powder 9Kg with marine bracket


669655 Strap for marine bracket



Approvals



Register of Shipping and China Classification society.

656



PPOOWWDDEER ER EXXTT. 6 K. 6 KG AG ABBC WC W//O BO BRRKKT - PT - P6P M186P M18

291 766988


higher fire ratings, improved fire fighting

capability and increased levels of user safety.

Features



fighting capability even on electrical fires up to 35 kV


Technical data

Fire rating 34A/233B/C

Capacity 6 Kg

Discharge Range 4 Mtr



Weight Empty 5 Kg

Weight Full 11 Kg

Height 500 mm

Diameter 180 mm


Benefits


safer fire fighting





when fire fighting




rusting safety pin



766987 Powder extinguisher 6Kg with marine bracket

668236 Spare 120g CO2 cartridge



668972 6Kg ABC powder pack

Approvals




657



WWAATTEER ER EXXTTINGINGUUISISHEHER 9 L WR 9 L WITITHOHOUUT BT BRRAACCKKEET ET E99MOMODDEEL EL E99

290 766982

Our 9 L cartridge operated water extinguisher

gets to the heart of fires with the specially

designed lance giving you quicker fire fighting

capabilities.

Features

• Higher fire ratings giving you quicker fire fighting

capability even on electrical fires up to 1000 V


Technical data

Capacity 9 Ltr

Min discharge Range 4 Mtr



Weight Empty 6Kg

Weight Full 15Kg

Height 500 mm

Diameter 180 mm

Fire Rating 21 A

Operating temp range +5 C to + 60 C

Benefits


safer fire fighting





when fire fighting




rusting safety pin



766981 Water extinguisher 9L with marine bracket




Approvals




658



FFOOAAM EM EXXTTINGINGUUISISHEHER 9 L WR 9 L WITITHOHOUUT BT BRRAACCKKEETT

290 766984

Our 9 L foam extinguisher gives you a specially

blended high performance AFFF additive

enabling you to fight fires quicker and efficiently.


higher fire ratings, easier fire fighting capability


Features


• Easier fire fighting capability

• Safer fire fighting


Technical data

Capacity 9 Ltr




Weight Empty 6 Kg

Weight Full 15 Kg

Height 640 mm

Diameter 180 mm

Fire Rating 27A-233B

Operating temp range +5 C to +60 C

Benefits

• Specially blended high performance AFFF additive

enables you to fight fires quickly and efficiently





when fire fighting




rusting safety pin



766983 Extinguisher foam 9L with marine bracket


736579 AFFF foam charge


Approvals

The extinguisher holds MED, RMRS, CCS, PED and NF EN

3 -7 approvals. The extinguishers are completely compliant

with the MED and SOLAS standards.

659



MEMETTAAL FL FIRIRE EE EXXTTINGINGUUISISHEHER 9 KR 9 KG WG WITITHOHOUUTTBBRRAACCKKEET - PT - P9F9FM.M.M M18M M18

290 657957

The Unitor 9 kg, cartridge operated, powder

metal fire extinguisher overcomes the limitations

when fighting metal fires with conventional fire

extinguishers.

Introducing argon with the Microfire D powder

ensures the powder bonds to magnesium,

aluminium, zinc, calcium and sodium fires,

extinguishes them and prevents reignition.

This extinguisher does not include the special

bracket.

Features

• Special powder and argon propelling agent for metal

fire fighting




Benefits

• Specially blended Microfire D powder enables you to fight metal fires quickly and efficiently

• Integrated flow control valve at the hose end equips you with a direct and better control to fight fire

• Our higher than normal industry standard burst pressure for the cylinder and hose safeguards you when fire fighting

• A long life and low maintenance costs are assured as our extinguishers are manufactured from 2 mm thick steel,

shot blasted, and polyester coated with a non-rusting safety pin

Technical data

Capacity 9Kg



Weight Empty 9 Kg

Weight Full 18 Kg

Height 640 mm

Diameter 180 mm

Fire rating Class D


Argon cartridge 0.536 L

Properties

Fluid white powder may be used on electrical sources.

Comprises a low percentage of potassium salts mixed with

microparticles of glass which melt at a low temperature (less

than 600°C) to form an adhesive coat with no vents.

Incompatibility

Microfire D powder is strictly incompatible with all other

powders. Never refill an extinguisher except with the original

powder.

660




766996 Metal fire extinguisher 9Kg with marine bracket

Accessories


759902 Microfire D powder - 9Kg

759894 Spare charge argon cylinder

711416 UNIVERSAL BRACKET F/P6/P6P/P9P/

Approvals

The metal fire extinguisher has been examined against the

provisions of Annex III, Module B, of the Pressure Equipment

Directive 97/23/EC.

661



FFOOAAM EM EXXTTINGINGUUISISHEHER 9 L WR 9 L WITITHOHOUUT BT BRRAACCKKEET ET EVVLLOOW TW TMPMP..HI THI TYYPPE EE E9A9A1E1EV LV LT HPT HP

290 764043

The Unitor 9 L, cartridge operated, low temp

application foam fire extinguisher overcomes

limitations when fighting fires in extreme low

temperature conditions with normal foam

extinguishers.

Introducing antifreeze with high performance

AFFF foam ensures an impregnable foam film

which extinguishes the fire and prevents

reignition.

This extinguisher does not include the special

bracket.

Features

• Special high performance AFFF additive and

antifreeze




Benefits

• Specially blended AFFF additive with antifreeze

enables you to fight fires at sub zero temperatures

quickly and efficiently





when fire fighting


our extinguishers are manufactured from 2 mm thick steel, shot blasted, and polyester coated with a non-rusting

safety pin

Technical data


662

FFAAT FT FIRIRE EE EXXTTINGINGUUISISHEHER 6 L WR 6 L WITITHOHOUUT BT BRRAACCKKEETTMOMODDEEL EL E6A6A15 E15 EVVFF

290 763870

Our Unitor 6 L, cartridge operated, fat fire

extinguisher has been specially designed for

cooking oil fires. It can be installed alongside the

automatic system in open kitchens where

automatic equipment is required, or as a means

suited to the risks presented in kitchens,

reheating rooms and cooking islands.

Features

• A B F rated - specially designed for kitchen oil fires

(Class F)

• Easier and safer fire fighting capability


Technical data

Capacity 6 Ltr

Discharge Range 3 Mtr



Weight Empty 6Kg

Weight Full 12 Kg

Height 500 mm

Diameter 180 mm

Fire Rating 13A-144B-75F

Benefits

• Our fat fire extinguishers contain water plus a high

performance AFFF additive which forms a film in

addition and will extinguish electrical fires up to 35 kV

• The integrated flow control valve at the curved hose

end equips you with a direct and better control to

fight the fire



when fire fighting




rusting safety pin



766980 Fat fire 6L extinguisher with marine bracket

668178 60g CO2 cartridge

736579 AFFF charge


Approvals


EC on Marine Equipment and also complies with European

standard NF EN 3-7A1.

663


Stored Pressure Extinguishers

PPOOWWDDEER ER EXXTTINGINGUUISISHEHER 2 KR 2 KG AG ABBC WC W//SSPPC WC WITITHHBBRRAACCKKEET MOT MODDEEL PL PPP2P2P

291 766995




Whether you require cartridge, stored pressure

or wheeled we use high grade quality materials

and coatings giving your extinguisher longer life

and reduced maintenance costs.

Features




Technical data

Capacity 2 Kg




Weight Empty 1.6 Kg

Weight Full 3.6 Kg

Height 380 mm

Diameter 105mm

Fire Rating 13A - 89B- C

operating temp range -30C to +60C

Benefits

• Our fire extinguishers boast high levels of

monoammonium phosphate giving you quicker fire




when fire fighting




rusting safety pin




Approvals


EC on Marine Equipment. It complies with European

standard EN 3 and is one of the highest performance

devices in its category.

664



DDP EP EXXTTINGINGUUISISHEHER 3 KR 3 KG AG ABBC PC PPP3P S3P SP WP WITITHOHOUUTTBBRRAACCKKEETT

291 755322

Our Unitor range of fire extinguishers offers you higher fire ratings, easier fire fighting capability and

increased levels of user safety. Whether you require cartridge, stored pressure or wheeled we use high

grade quality materials and coatings giving your extinguisher longer life and reduced maintenance

costs.

Features




Technical data

Capacity 3 Kg




Weight Empty 2 Kg

Weight Full 5 Kg

Height 455mm

Diameter 112 mm



Benefits






when fire fighting




rusting safety pin



755322 Extinguisher powder 3Kg stored press


Approvals



Register of Shipping and China Classification Society

It complies with European AENOR - EN 3 standard, and is of

the hightest performance in its category.

665



CCOO2 E2 EXXTTINGINGUUISISHEHER 5 KR 5 KG WG WITITHOHOUUT BT BRRAACCKKEETTMOMODDEEL UL U5C5C

292 667535

Our Unitor range of fire extinguishers offers you


and increased levels of user safety. Whether you

require cartridge, stored pressure or wheeled

we use high grade quality materials and

coatings giving your extinguisher longer life and

reduced maintenance costs.

Features




Technical data

Capacity 5 Kg

Burst Disc Pressure 200 Bar



Weight Full 14 Kg

Height 930 mm

Diameter 139.7 mm

Fire Rating 89B

Operating temp range -30C to +65C

Benefits

• Our CO2 fire extinguishers are suitable to fight fires on

live electrical installations on board shipping vessels

and can be used on electrical fires up to 35 kV



when fire fighting




rusting safety pin



667527 Extinguisher CO2 5Kg with marine bracket


Approvals




It complies with European standard NF - EN 3, and has

demonstrated the highest performance in its category.

666




291 671594








Features




Technical data

Capacity 6 Kg

Min discharge range 4.5 Mtr



Weight Empty 3.3 Kg

Weight Full 9.4 Kg

Height 530 mm

Diameter 190 mm



Benefits






when fire fighting




rusting safety pin





Approvals




It complies with European AENOR - EN 3 standard, and is of

the hightest performance in its category.

667




291 739508








Features




Technical data

Capacity 9 Kg

Minimum Discharge Time 26 Sec

Discharge Range 4.5 Mtr

Test Pressure 24Bar


Weight Empty 4.4 Kg

Weight Full 13.5Kg

Height 587mm

Diameter 218mm



Benefits






when fire fighting




rusting safety pin





Approvals




It complies with European standard NF - EN 3 and is of the

highest performance devices in its category.

668




291 743104

Our Unitor range of fire extinguishers offer you







Features




Technical data

Capacity 12 Kg

Min discharge range 4.5Mtr



Weight Empty 4.8 Kg

Weight Full 16.9 Kg

Height 630 mm

Diameter 198 mm



Benefits






when fire fighting




rusting safety pin





Approvals




669


Wheeled Extinguishers

PPOOWWDDEER ER EXXTTINGINGUUISISHEHER 50 KR 50 KG AG ABBC PC P50P50PWWHEHEEELLEEDD

291 609735

Where you have high risk locations with limited access our range of wheeled extinguishers gives you a

lightweight high volume fire fighting capability.

They provide you with the ability to quickly move high capacity extinguishers to the fire easily.

Features





Technical data

Capacity 50 Kg




Weight Empty 46 Kg

Weight Full 96 Kg

Hose Length 5 mtr

Wheel Diameter 300 mm

Fire Rating A-IVB-C

Operating temp range -30C to +60 C

Benefits




• Long and non-kinking hose with opening tap equips




when fire fighting




rusting safety pin



668335 CO2 cylinder

674317 ABC powder 25kg (X 2)

Approvals




Approved to EN1866 standards

670



EEXXTTINGINGUUISISHEHER CR COO2 20 K2 20 KG WG WHEHEEELLEEDD

292 767930








Features





Technical data

Capacity 20Kg

Min discharge range 3Mtr



Weight Empty 24Kg

Weight Full 49Kg

Hose Length 5 mtr


Fire Rating 144 B


Benefits

• Long and non kinking hose with insulated spray

nozzle equips you with a direct and better control to

fight fire



when fire fighting




rusting safety pin

Approvals

In compliance with the standard EN 1866-1. The

extinguisher is in compliance with MED, and approved by

BV, RMRS and CCS class societies.

671



FFOOAAM EM EXXTTINGINGUUISISHEHER 45 L WR 45 L WHEHEEELLEED MOD MODDEELLEE45A45A22

290 667378




costs.

Features





Technical data

Capacity 45 Ltr



Working Pressure 16.4Bar

Weight Empty 46 Kg

Weight Full 91 Kg

Hose Length 5 mtr


Fire Rating A-IVB

Operating temp range +5C to +60C

Benefits







when fire fighting




rusting safety pin




668194 CO2 cylinder charge

Approvals




672



FFOOAAM EM EXXTTINGINGUUISISHEHER 13R 135 L W5 L WHEHEEELLEED MOD MODDEELLEE13135A5A22

290 667386




costs.

Features





Technical data

Capacity 135 Ltr


Test Pressure 26.3 Bar


Weight Empty 96 Kg

Weight Full 231 Kg

Hose Length 5 mtr


Fire Rating A-B

Operating temp range +5C to +60C

Benefits







when fire fighting




rusting safety pin




668202 CO2 cylinder charge

Approvals




673



CCOO2 E2 EXXTTINGINGUUISISHEHER 45 KR 45 KG WG WHEHEEELLEEDD

292 667568




costs.

Features





Technical data

Capacity 45 Kg

Min discharge range 3.5 Mtr



Weight Empty 114Kg

Weight Full 159Kg

Hose Length 5 mtr


Fire Rating 183 B


Benefits

• Long and non-kinking hose with insulated spray


fight fire



when fire fighting




rusting safety pin

Approvals

This extinguisher is in compliance with the standard EN

1866-1. The extinguisher is also in compliance with MED,

and approved by BV, RMRS and CCS class societies.

674

PPOOWWDDEER ER EXXTTINGINGUUISISHEHER 25 KR 25 KG AG ABBC WC WHEHEEELLEEDDPP25P ME25P ME

291 767928








Features


• Easier and safer fire fighting capability


Technical data

Capacity 25Kg

Min discharge range 8Mtr

Test Pressure 22Bar


Weight Empty 24Kg

Weight Full 49Kg

Hose Length 3.5 mtr


Fire Rating A-IIB-C


Benefits




• Long and non-kinking hose with specially designed

spray gun equips you with a direct and better control

to fight fire



when fire fighting




rusting safety pin




609743 CO2 cartridge cylinder

Approvals




675



CCOO2 E2 EXXTTINGINGUUISISHEHER 9 KR 9 KG WG WHEHEEELLEEDD

292 767929








Features





Technical data

Capacity 9Kg



Working Pressure 169.3Bar

Weight Empty 40 Kg

Weight Full 49Kg

Hose Length 5 mtr


Fire Rating 113B


Benefits

• Long and non-kinking hose with insulated spray


fight fire



when fire fighting




rusting safety pin

Approvals




676



EEXXTTINGINGUUISISHEHER PR POOWWDDEER 25 KR 25 KG WG WHEHEEELLEEDD

291 755348




costs.

Features




Technical data

Capacity 25Kg




Weight Empty 17 Kg

Weight Full 42.3 Kg

Hose Length 1.45 mtr




Benefits






when fire fighting




rusting safety pin




Approvals


EC on Marine Equipment.

677


Spare parts for fire extinguishers

CCOO2 C2 CAARRTTRRIDIDGGE 60 G FE 60 G FOOR 9 L WR 9 L WAATTEERR/ F/ FOOAAM EM E99//EE9A9A1/E1/E9A9A1E1EV EV EXXTTINGINGUUISISHEHERR

294 668178

Unitor offers a complete range of cartridges and

charges to ensure that fire extinguishers remain

compliant, requiring minimal technical

knowledge to replace.

They are easy to replace and store on board

your vessel. These are suitable for Unitor's

cartridge operated water and foam type

extinguishers.

Features

• Easy to replace


Technical data

Size 60g

Benfits

• You can easily replace them by unscrewing them

from the head cap

• Coated with zinc primer our cartridges have long

shelf life and require minimal space for storage on

your vessel

678



CCOO2 C2 CAARRTTRRIDIDGGE 450 G FE 450 G FOOR FR FOOAAM 45 LM 45 LEEXXTTINGINGUUISISHEHERR

294 668194






your vessel. These are specially designed for

Unitor's 45 L wheeled foam extinguisher

Features

• Easy to replace


Benefits

• You can easily replace them by disconnecting the connections on the cylinder

• Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel

Technical data

Size 450g

679

CCOO2 C2 CAARRTTRRIDIDGGE 2 KE 2 KG FG FOOR 13R 135 L F5 L FOOAAMMEEXXTTINGINGUUISISHEHERR

294 668202






your vessel. These are specially designed for

Unitor's 135 L wheeled foam extinguisher.

Features

• Easy to replace


Benefits

• You can easily replace them by disconnecting the

connections on the cylinder

• Coated with zinc primer our cartridges have long

shelf life and require minimal space for storage on

your vessel

Technical data

Size 2Kg

680

CCOO2 C2 CAARRTTRRIDIDGGE 120 G FE 120 G FOOR 6 KR 6 KG PG POOWWDDEERREEXXTTINGINGUUISISHEHERR

294 668236






your vessel. These are suitable for Unitor

cartridge operated 6 kg powder type

extinguishers.

Features

• Easy to replace


Benefits

• You can easily replace them by unscrewing them from the head cap


Technical data

Size 120g

681



SSPPAARRE CE CAARRTTRRIDIDGGE 160 G FE 160 G FOOR 6 KR 6 KG PG POOWWDDEER (R (BBCCRRAATTEEDD) E) EXXTTINGINGUUISISHEHERR

294 668244








extinguishers.

Features

• Easy to replace


Benefits



Technical data

Size 160g

682



CCOO2 C2 CAARRTTRRIDIDGGE 180 G FE 180 G FOOR 12 KR 12 KG PG POOWWDDEERREEXXTTINGINGUUISISHEHERR

294 668251








extinguishers.

Features

• Easy to replace


Benefits



Technical data

Size 180g

683



CCOO2 C2 CAARRTTRRIDIDGGE 450 G FE 450 G FOOR 25 KR 25 KG PG POOWWDDEER (R (AABBCCOOR BR BC RC RAATTEEDD) E) EXXTTINGINGUUISISHEHERR

294 668327

Unitor offers a complete range of cartridges and charges to ensure that fire extinguishers remain

compliant, requiring minimal technical knowledge to replace.

They are easy to replace and store on board your vessel. These are suitable for Unitor cartridge

operated 25 kg powder type extinguishers.

Features

• Easy to replace


Benefits



Technical data

Size 450g

684



CCOO2 C2 CAARRTTRRIDIDGGE 900 G FE 900 G FOOR 50 KR 50 KG PG POOWWDDEER (R (AABBCCOOR BR BC RC RAATTEEDD) E) EXXTTINGINGUUISISHEHERR

294 668335








extinguishers.

Features

• Easy to replace


Benefits

• You can easily replace them by disconnecting the connections on the cylinder


Technical data

Size 900g

685



AAFFFFF FF FOOAAM CM CHAHARRGGE 90 ML FE 90 ML FOOR 9 L FR 9 L FOOAAMMEEXXTTINGINGUUISISHEHERR

293 736579






your vessel. These are suitable for Unitor's

cartridge operated 9 L foam type extinguishers.

Features

• Easy to replace

• High performance fluoro additive

Benefits


• High performance fluoro additive offers higher fire ratings, strong wetting power, and impregnable film that

extinguishes fire quickly

Technical data

Size 90ml

686



AAFFFFF FF FOOAAM CM CHAHARRGGE FE F//EE45A45A2 230002 2300011-11-00..9 L9 L

294 668210

Unitor offers a complete range of AFFF foam

charges for your fire extinguishers. The AFFF

foam charges are made from high performance

fluoro additive giving your extinguisher faster

and effective fire fighting control.

Features


• Easy to dose and store

Benefits

• High performance fluoro additive offers higher fire

ratings, strong wetting power, and impregnable film

that extinguishes fire quickly

• The additive comes in small plastic bottles and is

easy to store and replace on board your vessel

Technical data

Size 0.9L

687



AAFFFFF FF FOOAAM CM CHAHARRGGE 3 X 0E 3 X 0..9 L F9 L FOOR 13R 135 L F5 L FOOAAMMEEXXTTINGINGUUISISHEHERR

294 668228

Unitor offers a complete range of AFFF foam

charges for your fire extinguishers. The AFFF

foam charges are made from high performance

fluoro additive giving your extinguisher faster

and effective fire fighting control.

Features


• Easy to dose and store

Benefits

• High performance fluoro additive offers higher fire

ratings, strong wetting power, and impregnable film

that extinguishes fire quickly

• The additive comes in small plastic bottles and is

easy to store and replace on board your vessel

Technical data

Size 2.7L (0.9L X 3)

688



PPOOWWDDEER RR REEFFILILL FL FOOR 6 KR 6 KG AG ABBC EC EXXTTINGINGUUISISHEHERR

294 668285

Unitor offers ABC powder charges for the complete range of powder extinguishers. These come in

vacuum sealed packages in various sizes complementing your extinguisher.

Unitor's multi-purpose ABC powder is highly effective on class A, B or C fires and can be used in the

presence of an electrical source.

Features

• High fire rating

• Easy to store

Benefits

• Our fire extinguishers boast high levels of monoammonium phosphate giving you quicker fire fighting capability even

on electrical fires up to 35 kV

• Our powder charges come in vacuum sealed packages offering long shelf life and can be easily stored on board your

vessel

Technical data

Size 6Kg

Colour Light blue

Apparent density 850 - 950 Kg/m3

Water content < 0.25%

689




294 668293


vacuum sealed packages in various sizes complementing your extinguisher



Features


• Easy to store

Benefits




vessel

Technical data

Size 9Kg

Colour Light blue



690




294 668319


vacuum sealed packages in various sizes complementing your extinguisher.



Features


• Easy to store

Benefits




vessel

Technical data

Size 12Kg

Colour Light blue



691




293 674317

Unitor offers ABC powder charges for the

complete range of powder extinguishers. These

come in vacuum sealed packages in various

sizes complementing your extinguisher.

Unitor's multi-purpose ABC powder is highly

effective on class A, B or C fires and can be

used in the presence of an electrical source.

Features


• Easy to store

Benefits





vessel

Technical data

Size 25Kg

Colour Light blue



692

MAMARRINE BINE BRRAACCKKEET WT WITITH SH STTRRAAP FP FOOR 5 KR 5 KG CG COO22EEXXTTINGINGUUISISHEHERR

293 668111

Unitor offers a complete range of marine brackets for your fire extinguishers. Smartly designed, our

marine brackets require minimal space for installation and give fast and easy access to the extinguisher.

These are easy to install and keep the extinguishers properly secured in place on board your vessel.

Features

• Robust design

• Adjustable strap

Benefits

• Our marine brackets are manufactured with quality steel and coated with primer offering you a long service life

• Adjustable straps give you the flexibility to adjust and secure the extinguisher properly

UUNIVNIVEERRSSAAL BL BRRAACCKKEET FT FOOR PR P66/P/P6P6P/P/P9P9P/ P/ P12/P12/P12P12P//EE99/E/E9A9A11

293 711416

Unitor offers a complete range of marine

brackets for your fire extinguishers. Smartly

designed, our marine brackets require minimal

space for installation and give fast and easy

access to the extinguisher

These are easy to install and keep the

extinguishers properly secured in place on

board your vessel.

Features

• Robust design


Benefits

• Our marine brackets are manufactured with quality

steel and coated with primer offering you a long service life


693



MAMARRINE BINE BRRAACCKKEET WT WITITH SH STTRRAAP FP FOOR PR PPP6P6P

293 671909





access to the extinguisher.



board your vessel.

Features

• Robust design


Benefits




MAMARRINE BINE BRRAACCKKEET WT WITITH SH STTRRAAP FP FOOR PR PPP9P9P

291 739516








board your vessel.

Features

• Robust design


Benefits




694



EEXXTTINGINGUUISISHEHER BR BRRAACCKKEET WT WITITH SH STTRRAAP FP FOOR 12 KR 12 KGGSSTTOORREED PD PRREESSSSUURREE

291 743112








board your vessel.

Features

• Robust design


Benefits




695

SSAAFFEETTYY Fire Hoses, Couplings and Nozzles

Fire Couplings

NONORRWWEEGGIAIAN CN COOUUPPLLINGING

Our Unitor Norwegian range of couplings

provides you with a comprehensive range of

hose sockets, male and female couplings suited

for fire fighting equipment. Easy to connect,

they are light weight and robust.

Features

• Standard connections

• Easy to connect

• Aluminium alloys fitting

Technical data

Nominal size 1 1/2, 2, 2 ½ inch

Benefits

• Standard connections make our couplings easily

compatible with your on board fire fighting equipment

• Our couplings and hose sockets come with standard

thread sizes and socket diameters, making

connection an easy process

• Being manufactured from aluminium alloy makes

them corrosion-proof and maintenance-free, giving a

more durable and longer life product



233874 NOR-1 CPL W/1¢" HOSE SOCKET

233817 NOR-1 CPL W/2 ¢" HOSE SOCKET

233908 NOR-1 CPL W/2" FEMALE THREAD

790593 NOR-1 CPL W2¢" FEMALE THREAD

233940 NOR-1 CPL W/2" MALE THREAD

233882 NOR-2 CPL W/1¢" HOSE SOCKET

233841 NOR-2 CPL W/2'' HOSE SOCKET

233916 NOR-2 CPL W/2" FEMALE THREAD

233957 NOR-2 CPL W/2" MALE THREAD

Accessories


527697 NOR COUPLING SPANNER

696


Fire Couplings

SSTTOORRZ CZ COOUUPPLLINGING

Our Unitor Storz range of couplings provides

you with a comprehensive range of hose

sockets, and male and female couplings suited

for fire fighting equipment. Easy to connect they

are light weight and robust.

Features


• Easy to connect


Technical data

Storz type C, 65, B

Nominal size 1 1/2, 2, 2 1/2 inch

Benefits



• Our couplings and hose sockets come with standard

thread sizes and socket diameters, respectively,

making them easier to connect

• Aluminium alloy makes this socket corrosion-proof

and maintenance-free



790336 STORZ C CPL W/1¾ HOSE SOCKET

233890 STORZ C CPL W/1¢" HOSE SOCKET

233858 STORZ C CPL W/2'' HOSE SOCKET

605121 STORZ C CPL W/1¢" MALE TREAD

233965 STORZ C CPL W/2'' MALE THREAD

233924 STORZ C CPL W/2" FEMALE THREAD

607965 STORZ C CPL W/2 1/2" FEMALE THREAD

523357 STORZ GASKET F/C CPL LUG 66

523431 STORZ 65 CPL W/2'' HOSE SOCKET

523449 STORZ 65 CPL W/2 1/2'' HOSE SOCKET

523456 STORZ 65 CPL W/2'' FEMALE THREAD

605311 STORZ 65 CPL W/2¢" FEMALE THREAD

595777 STORZ 65 CPL W/2" MALE THREAD

595769 STORZ 65 CPL W/2¢" MALE THREAD

784012 STORZ B CPL W/2¢" HOSE SOCKET

697


Fire Couplings

INSINSTTAANTNTAANENEOOUUS CS COOUUPPLLINGING

Our Unitor British standard instantaneous range

of couplings provides you with a comprehensive

range of hose sockets, and male and female

couplings suited for fire fighting equipment.

Instantaneous connection provides quick and

easy connections, saving precious time.

Features


• Easy to connect


Benefits



• Our couplings and hose sockets come with standard thread sizes and socket diameters, respectively, making them

easier to connect

• Aluminium alloy makes this socket corrosion-proof and maintenance-free while having a long product life

Technical data

Std nominal size (inch) across all range 2 ½"



572826 INSTANT. CPL W/1¢" HOSE SOCKETS

572842 INSTANT. CPL W/1¥" HOSE SOCKETS

572834 INSTANT. CPL W/2" HOSE SOCKETS

572933 INSTANT. CPL W/2¢" HOSE SOCKETS

572925 INSTANT. CPL FEMALE W/2"FEMALE THRE

572917 INSTANT. CPL FEMALE W/2¢"FEMALE THR

572941 INSTANT. CPL MALE W/2"MALE THREAD

572974 INSTANT. CPL MALE W/2¢" MALE THREAD

572966 INSTANT. CPL MALE W/2"FEMALE THREAD

572958 INSTANT. CPL MALE W/2¢"FEMALE THREA

572891 INSTANT. CPL FEMALE W/2¢"MALE THREA

698


Fire Hoses

MAMARRTTEEX FX FIRIRE HOE HOSSEE

Our Unitor brand of fire hoses offers you a

rugged and reliable product complementing

your onboard requirements.

This Martex range of hoses is specifically

designed for marine use providing you with a long life product suitable for extreme climatic and fire

fighting conditions. They are uncovered, fully synthetic fire hoses and are suitable for applications within

temperature range from -40°C to +90°C.

Features

• High heat resistance

• Light weight

• Available with or without coupling

Technical data

Approvals MED, EN 14540:2004 + A1:2007

Length Standard 15mtr or per meter

Inner diameter 1 1/2, 2 or 2 1/2 inch

Max working

pressure

15bar

Min burst pressure 50bar

Temp range -40 C to + 90 C

CouplingStd Norwegian, Storz, Instantaneous or without

couplings

Benefits

• Our hoses are manufactured from circular woven

polyester with inner EPDM rubber lining, providing

you hoses compatible with hot fluids

• Light in weight enabling you to carry them with ease

on board your vessel

• We provide you with ready to use hoses fitted with

standard couplings or hoses without couplings, giving

you the flexibility to choose and fit the ones suited for

your fire fighting equipment



589739 MARTEX 2" W/STORZ C 2"" CPL 15MTR

589747 MARTEX 2" W/INSTANT. CPL 15MTR

589762 MARTEX F.HOSE 2 1/2"" X 15 M

564609 MARTEX FIRE HOSE 1 1/2 " PER METER

564617 MARTEX FIRE HOSE 2"" PER METER

605212 BINDING MACHINE PORTABLE

605220 BIND.BRACKET F/COUPLING

758888 BINDING WIRE 1.6MM STAINLESS STEEL

699


Fire Hoses

GGUUAARRDDMAMAN FN FIRIRE HOE HOSSEE

A rugged and reliable product complementing

your onboard requirements. Specifically

designed for marine use, providing you with a

long life product suitable for extreme climatic

and fire fighting conditions. We use materials

that safeguard the hoses against external

damage from UV radiation, oil and commonly

used chemicals.

Features

• Easy to use & with high durability

• Available with our without coupling

Technical data


Length Standard 15 mtr or per meter


Max working pressure 15bar



Coupling Std Norwegian, Storz or without couplings

Benefits

• Our hoses are made of a rubber blend with circular

woven polyester jacket giving you safer operations by

absorbing sudden pressure increases during use

• Light weight design enables you to carry them with

ease onboard your vessel when fighting fires







589606 GUARDMAN 1¢" W/NOR-1 CPL 15MTR

510701 GUARDMAN 2" W/NOR-1 CPL, 15MTR

510719 GUARDMAN 2" W/NOR-2 CPL, 15MTR

589598 GUARDMAN 1¢" W/STORZ C CPL 15MTR

510727 GUARDMAN 2" W/STORZ C CPL 15MTR

589614 GUARDMAN 2¢" W/STORZ 65 CPL 15MTR

233759 GUARDMAN 1 1/2" AT 15 MTR

233767 GUARDMAN 2" x 15 m, w/o COUPLINGS

233775 GUARDMAN 2 1/2" AT 15 MTR

574939 GUARDMAN FIRE HOSE 1 1/2" PER MTR

574947 GUARDMAN FIREHOSE 2" PER MTR

574954 GUARDMAN FIREHOSE 2 ¢" PER MTR



758888 Binding wire 1.6mm - Stainless steel

700


Fire Hoses

MEMERRTTEEX FX FIRIRE HOE HOSSEE

A rugged and reliable product complementing

your onboard requirements. Specifically

designed for marine use providing you with a

long life product suitable for extreme climatic

and fire fighting conditions.

Features

• Extreme low temp use

• Light weight

• Available with or without coupling

Technical data


Length Standard 15,18,20 mtr or per meter


Max working

pressure

15bar



CouplingStd Norwegian, Storz, Instantaneous or without

couplings

Benefits

• Our hoses are manufactured as circular woven with

inner thermoplastic polyurethane lining safeguarding it

against both internal and external wear (UV radiation,

oil and commonly used chemicals), even at

temperatures as low as -50° C

• Light weight design enables you to carry them with

ease onboard your vessel when fighting fires







589630 MERTEX 1¢" W/NOR-1 CPL 15MTR

589622 MERTEX 1½" W/STORZ C CPL 15MTR

758870 MERTEX 2"" W/STORZ C CPL 18 MTR

758862 MERTEX 2" W/STORZ C CPL 20 MTR

589671 MERTEX 2¢" W/STORZ 65 CPL 15MTR

589655 MERTEX 2" W/INSTANT. CPL 18MTR

589689 MERTEX 2¢" W/INSTANT. CPL 18MTR

589580 MERTEX FIRE HOSE 1¢" PER MTR

589572 MERTEX FIRE HOSE 2" PER MTR

589564 MERTEX FIRE HOSE 2.5" PER MTR



758888 BINDING WIRE 1.6MM STAINLESS STEEL

701


Fire Hoses

CCLLAAMPMPING DING DEEVVICICE FE FOOR BR BINDINDING MAING MACCHINEHINE

295 605220

This clamping device is used in combination

with the portable binding tool to connect

couplings to the fire hose with varying sizes

from 25 mm to 110 mm in diameter.

The hand crank allows you to adapt the

clamping arrangement optimally to the coupling

size. The clamping device can be easily affixed

to your vessel's workshop standard vice with

jaw of at least 75 mm.

BBINDINDING MAING MACCHINE PHINE POORRTTAABBLLEE

295 605212

This hand held binding device, combined with

our mechanical clampling device, provides a

complete tool for binding couplings to our

Unitor brand of fire hoses with diameters

ranging from 25 mm to 110 mm.

This device is made of a cast frame with a strip

brake. A hand crank is supplied for winding the binding wire.

702


Fire Hydrants

HYHYDDRRAANT VNT VAALLVVEE

Our Unitor fire hydrant valves enable you to connect the fire hoses with the fire mains onboard your

vessel. They come with straight or angled flange connections.

The fire hydrant valves are made of aluminium alloy suited for marine environments giving you a

maintenance-free and corrosion-resistant product.

Features

• High corrosion-resistant

• Does not include couplings

• Robust material

Benefits

• Our hydrants are manufactured from aluminium alloy offering you a high corrosion-resistant product with a

maintenance-free long life

• Gives you the choice to connect to any coupling compatible with the fire main system on board your vessel

• One-piece cast body offers you a robust hydrant



775577 HYDRANT VALVE 2""W/FLANGE STRAIGHT

775544 HYDRANT VLV 2 1/2"W/FLANGE STRAIGH

534198 HYDRANT VALVE W/2'' MALE THREAD

590232 HYDRANT VALVE 2¢"W/FLANGE DN65 PN16

534172 HYDRANT VALVE 2" W/FLANGE DN50 PN16

791693 HYDRANT DIVIDER STORZ 65*3XSTORZ 65

703


Fire Hydrants

INTINTEERRNANATTIOIONANAL SL SHIP THIP TO SO SHOHORRE CE COONNENNECCTTIOIONN

Our Unitor International Shore Connections are in accordance with the regulation of "International

Convent for the Safety of Life at Sea, 1960" (SOLAS). They are used for connecting your onboard fire

fighting installation mains to the harbour. The dimensions of the flange are standardized globally.

This International Shore Connection comes with Storz C couplings or without couplings.

Features

• Connection to harbour fire lines

• Standardised connection

• Fitted with Storz C or without coupling

Benefits

• This connection allows you to connect the onboard fire main line with the harbour fire systems in emergency and in

dry dock

• Standard flange size connection makes it easy and quick to connect in any port

• Gives you the choice to connect any coupling compatible with your onboard fire main connection or with the Storz C

connection

Technical data

Inside dia. d (mm) 45

Face-to-face length L (mm) 90

Flange-dia. D (mm) 178

LK/z 132/4

Hole dia. (mm) 19



607966 INT.SHORE CONN W/2 1/2" MALE THREAD

607967 INT SHORE CONN W/STORZ C

727753 INT. SHORE CONN W/2" MALE THREAD

704


Fire Nozzles

FFIRIRE NOE NOZZZZLLEESS

Fire nozzles provide you with the first line of

defence when fighting fires. We understand this

need and our Unitor range of fire nozzles are

designed to enhance your fire fighting capability

when tackling fires.

Our fire nozzles are dual purpose spray and jet

mode offering variable flow rates and spray

angles. The nozzles are light weight, robust and

incorporate minimalistic parts giving you an

easy to use and maintenance-free product.

Features

• Variable flow rate and spray angle

• Light weight

• Corrosion proof

Technical data

Approvals

std

EN 15182-1&3:2007 +A1:2009

MaterialNitrile butadiene rubber (NBR) & Polyoxymethylene

(POM)

Benefits

• Variable flow rates and spray angles give you the

flexibility to adjust water use as per your requirement

• Light weight enables you to carry them with ease

onboard your vessel when fighting fires

• The use of NBR rubber for the operating head and a

POM plastic tube body makes our nozzles corrosion-

proof, giving you a long lasting product



708271 SPRAY/JET NOZZLE 12MM HS-12



737759 TURBO NOZZLE 2000 W/2" MALE THREAD

705

SSAAFFEETTYY Fire System products

Foam Concentrates

SSEETTAARRTNTNEECNCNOOC M C MAAOOFF

Our range of foam concentrates gives you a wide range of coverage from engine spaces to open

decks, all approved to MED. You can choose from regular or fluoro protein, AFFF, and synthetic foam

concentrates with alcohol-resistant variants. We can also test your foams to ensure you comply with

national flag and appropriate class standards.

Our technical support teams and stocks are available to support your needs at key ports globally.

Features

Available in 20 and 200 litre containers

Used in a wide range of pumps and applicators

High, medium and low expansion rates

Testing to required standards

Benefits

You can choose from 2 sizes of containers for ease of handling and convenience

We give you an extensive choice of concentrates to meet your requirements

We offer testing of the foam concentrate and small scale fire tests to ensure you comply to IMO MSC1312

Our customer support ranges from technical advice to design and service of your foam systems



Unitor deck foam concentrates:

UNIVEX Super Universal-alcohol resistant

764987 UNIVEX 3x3 Super FP-AR 3% 20 Lt can

764985 UNIVEX 3x3 Super FP-AR 3% 200 Lt drum

764988 UNIVEX 3x3 Super FP-AR 6% 20 Lt can

764986 UNIVEX 3x3 Super FP-AR 6% 200 Lt drum

AFFF alcohol-resistant

777688 AFFF-AR 3% 20 Lt can

777927 AFFF-AR 3% 200 Lt drum

AFFF

777686 AFFF 3% F-15 20 Lt can

777685 AFFF 3% F-15 200 Lt drum

777696 AFFF 1% F-20 20 Lt can

777695 AFFF 1% F-20 200 Lt drum

777692 AFFF 3% F-25 20 Lt can

777691 AFFF 3% F-25 200 Lt drum

777694 AFFF 6% F-35 20 Lt can

777693 AFFF 6% F-35 200 Lt drum

UNIMIN

576454 UNIMIN Protein 3% 20 Lt can

706


574723 UNIMIN Protein 6% 20 Lt can

UNIROL

592204 UNIROL Flouroprotein 3% 20 Lt can

556084 UNIROL Flouroprotein 3% 200 Lt drum

592212 UNIROL Flouroprotein 6% 20 Lt can

UNIREX

592196 UNIREX Synthetic 3-6% 20 Lt can

556092 UNIREX Synthetic 3-6% 200 Lt drum

Hydral

772392 HYDRAL AFFF 3% (S3) 25 Lt can

772384 HYDRAL AFFF 3% (S3) 200 Lt drum

Unitor Hi expansion foam concentrate

711808 HIGH Expansion Synthetic Foam

2% 20 Lt can

711390 HIGH Expansion Synthetic Foam 2% 200 Lt drum

Accessories


605030 Unitor foam applicator MLR - 40 SA 215 L/ 3%




606080 Foam station box

605121 Storz C coupling with 1 1/2 inch male thread

605113 Storz 65 coupling with 1 1/2 inch male thread

791455 Storz B coupling with 1 1/2 inch male thread

678953 Nakajima coupling 40A with 1 1/2 inch male thread

707

SSMOMOKKE AE AND HEND HEAAT DT DEETTEECCTTOOR TR TEESSTTINGING

To ensure your heat, smoke and CO2 are fully

functional we offer a range of test equipment

and ancillaries for you to comply to local and

international regulations.

Whether fitted in high or low ceilings the

optional fittings can extend your reach to nearly

10 metre heights.

For those areas of your vessel with no power

supply you can still test using our cordless heat

detector tester.

Features

• Heat, smoke and CO2 testers

• Synthetic smoke aerosols

• Extension poles for high ceilings

• Powered and non powered units

Technical data

Universal design suits widest range of detectors (up to 100mm /

4" in diameter)

Benefits

• UL listed

• Universal suits most detectors

• Lifetime warranty

• Approved by leading detector manufacturers

Smoke detector testing

Test requirements for smoke detectors vary by country but

fall broadly into two categories:

Functional (or operational) testing

Functional checking is accomplished by introducing a

smoke, or simulated smoke, stimulus from the protected

area through the vents of a detector to the sensor(s). It is

required by all national standards around the world and

testing by electronic means which do not involve this test are

not sufficiently compliant.

Calibration (or sensitivity) testing

Sensitivity testing confirms whether the detector’s

performance is within the acceptable parameters. Although

some countries’ codes accept field sensitivity tests of smoke

detectors by electronic means it can only be properly done

by introducing a quantified source of smoke or surrogate

smoke to the detector from the protected atmosphere.



740811 Aerosol smoke and CO2 tester

740829 Telescopic pole

751305 Extension for telescopic pole

740837 12 pack Smoke tester aerosols

743070 Heat detector tester

740845 Cordless heat detector tester

708

�� -+�� !" "# !�� , %��& �'��-+&��$�(��)�'*

�� -+�� !" "# !�� , %��& �'��-+&��$�(��)�'�

SAFETY


LIFE SAVINGMEDICAL

ENVIRONMENTAL

PERSONAL SAFETY

It is a fact of life that accidents happen, but how we protect ourselves from short and long term injury is a crucial element in today’s onboard working environment. WSS’s range of personal safety equipment has been specially designed to offer comfort as well as security.

Where required, our equipment includes spare parts to ensure that levels of safety are not compromised when faced with damage, misuse, loss or wear and tear. All products are compliant with varying local regulations, giving your crew protection and you peace of mind. Furthermore, they are supported by WSS’s global service station network, allowing us to work with you to manage, monitor and maintain your personal safety equipment.

SSAAFFEETTYY Respiratory Equipment

Breathing Air Compressors

BBRREEAATTHING AHING AIR CIR COOMPMPRREESSSSOORRSS

WSS offers a complete range of compressors

perfectly suited for use on board your vessels

when your breathing apparatus or lifeboat

cylinders need refilling.

We now supply all units complete with a

certificate for pure air.

Whether you have occasional light use or heavy

use our Junior II or Oceanus fit your

requirements.

Features

• Wide range of types and pressures

• All units can be pressure reduced or increased to suit

breathing apparatus or lifeboat air cylinders

• Bauer Triplex filter technology

• Lightweight, anti-corrosion strong frames

Benefits

• You can opt for light or heavy use and still use change over devices to alternate pressures from 200 to 300 bar

• Light-weight space age frames allow you to manoeuvre them around your vessel

• Bauer's famous Triplex filter technology will give you pure air on a consistent basis

• Corrosion-resistant making them ideal for you to use on board

Junior II and Oceanus come complete with air purification

system and a fill hose. They are safe and reliable three stage

compressors which are easily maintained on board. They are

supplied with a three phase 230/460 VAC electric motor.

712

JJUUNIONIOR II-E AR II-E AIR CIR COOMPMPRREESSSSOORR

The Bauer Junior II-E 200 bar compressor is

perfectly suited for you to use on board vessels

that need to fill breathing air cylinders regularly

but not continuously. The robust coated frames

give you durability and a longer life in the marine

environment. Comes complete with air

purification certificate when new, valid for 12

months.

Features

• 200 bar filling

• Long-life Triplex P21 filter cartridges ensure cleaner

air (EN12021)

• Highly engineered, robust, light-weight and portable

Benefits

• Triplex filters ensure a consistent safe source of clean

breathing air

• The built-in B Timer provides a filter condition status,

scheduled maintenance and running hours log to

ensure the quality of your air remains high

• The corrosion-resistant steel frames make it ideal for

use on board vessels

• We have a 20 year spare parts supply in addition to

global technical service to support your investment

for the long-term



619387 Junior II Compressor 400/440v - 200 bar

619395 Junior II Compressor 400/440v - 300 bar

619403 Junior II Compressor 400/440v - 200/300 bar

Accessories


709139 Change over device from 200 to 300 bar

652644 Junior II Service kit 500 hours

652651 Junior II Service kit 1000 hours(also need 652644)

736208 Junior II Service kit 2000 hours(also need 652651)

655134 Mineral oil 1 litre for compressors from 1999 to July 2006

655167 Synthetic oil 1 litre for compressors from September 1992 to March 1999

758169 Synthetic oil 1 litre for compressors from July 2006 onwards

736660 Breathing air quality test kit

Approvals

The compressor is approved to the highest standards of the

Pressure Equipment Directive 97/23/EC. Quality of breathing

air delivered complies to DIN EN12021.

713



OOCCEEAANUNUS E AS E AIR CIR COOMPMPRREESSSSOORR

Bauer Oceanus compressors are perfectly

suited for use on board vessels that need to fill

breathing air cylinders regularly. They are light-

weight, easily portable and have a compact

design with heavy duty motors allowing you to

use them more regularly.

Features

• 200-300 or 200/300 bar filling

• Long-life Triplex P21 filter cartridges ensure cleaner

air (EN12021)

• Highly engineered, robust and light-weight

Benefits

• Triplex filters ensure a safe source of clean breathing

air consistently

• The built in B Timer provides a filter condition status,

scheduled maintenance and running hours log to ensure the quality of your air remains high

• The corrosion-resistant steel frames make it ideal for use on board vessels

• We have a 20 year spare parts supply in addition to global technical service to support your investment for the long-

term



735829 Oceanus compressor 400/440v 200 bar

735837 Oceanus compressor 400/44v 300 bar

735845 Oceanus compressor 400/440v 200/300 bar

Accessories


709139 Change over device from from 200 to 300 bar

764100 Service kit Oceanus 500 hours

764118 Service kit Oceanus 1000 hours(also require 764100)

764126 Service kit Oceanus 2000 hours (also require 764118)

655134 Mineral oil for compressors from 1999 to July 2006

655167 Synthetic oil for compressors from September 1992 to March 1999

758169 Synthetic oil for compressors from July 2006 onwards

736660 Breathing air quality test kit

Approvals

The compressor is approved to the highest standards of the

Pressure Equipment Directive 97/23/EC. Quality of breathing

air delivered confirms to DIN EN12021.

714



BBRREEAATTHING AHING AIR CIR COOMPMPRREESSSSOORRS B TS B TIMEIMERR

395 755967

The B Timer is a self-activating minicomputer

that counts your operating hours of the

compressor and calculates the saturation of the

filter cartridge. This is all achieved through

taking into account time, temperature, cartridge

type and delivery rate of the compressor.

It displays operating hours, cartridge lifetime

and all maintenance due for the compressor

which ensures you receive clean air constantly.

Features

• Records running hours

• Continuous filter cartridge monitoring

• 3 year battery life

Benefits

• Provides easy to read maintenance log for continual monitoring of your compressors

• Your filter cartridge is constantly monitored ensuring you receive clean air

• The 3 year battery gives you a long life and with no wiring necessary you can fit the B Timer quickly and simply

Technical data

Operating temp range 0 C to + 50 C

Storage temp -20 C to + 70 C

Protection class IP 65

Vibration +/- 3g in operation

Humidity 95 %

715



CCOOMPMPRREESSSSOOR FR FILILTTEER CR CHAHARRGGE FE FOOR JR JUUNIONIORR//OOCCEEAANUNUS TS TRRIPIPLLEEX FX FILILTTEERR

395 528935

Bauer filter cartridges exceed the European

standards EN 12021 for breathing air

purification.

By keeping as a spare on board you can quickly

replace in case of an emergency.

Features

• Contains activated carbon, hopcalite and molecular

sieve

• Easy to handle and replace

Benefits

• This filter maintains the high quality of your breathing

air

• It is a quick replacement when your B Timer filter

status alerts

Technical data

Standard EN 12021

Oil / Aerosols <0.1 mg/m3

CO < 5 ml/m3

CO2 < 500 ppm (V/V)

Water vapour < 10 mg/m3

Odour / taste Nil

SO2 < 0.1 ppm (v/v)

NO < 0.1 ppm (v/v)

NO2 < 0.1 ppm (v/v)

716



BBAAUUEER CR COOMPMPRREESSSSOOR FR FILILLLING HOING HOSSE 50 M DE 50 M DN6,N6,PPN450N450

395 758847

Bauer compressor 50 metre hose for filling lifeboat cylinders. They are flexible and fitted with hose

protection and a handle on the end of the pressure gauge as well as fittings of stainless steel. All hoses

and fittings are 100% pressure tested, have a 20,000 cycle test and the corresponding approval.

Bauer compressor filling hoses feature a very high certified temperature range.

Features

• Ease of use

• Robust material

Technical data

Operating pressure 425 Bar

Connection M16 X 1.5

DN 5 mm

Outer dia 13.3 mm

Outer layer Pricked

Resistant agianst Salty air, salt water, sun and fuel

Material Fluoropolymer

Temperature -40 C to + 100 C

Colour Black

Benefits

• Long length and standard fittings enable you to

connect the compressor with lifeboat cylinder without

moving them from their location

• Fluoropolymer pricked hose withstands extreme

weather conditions providing you with safe operation

717



CCOOMPMPRREESSSSOOR 300-R 300-200 B200 BAAR CR CHAHANGNGE OE OVVEERRDDEEVVICICEE

395 709121

Bauer change over devices increase the flexibility of use of your compressors to allow for varying

pressure requirements. The 300-200 bar change over device comes complete in kit form for immediate

use and is simple to install requiring no specialist knowledge.

Benefits

• The black hand wheel on the filling gives you a safety precaution to differentiate the pressure the compressor is set at

• The simple bolt on kit requires you to have no specialist knowledge to install

• You can install on any Bauer compressors

• WSS global service support gives you assurance should you need any assistance or advice

Supplied with:

• Switch-over device EDP 528901

• Safety valve 225 bar EDP 643544

• Filling hose EDP 606168

• Filling valve 225 bar (black hand wheel) EDP 605261

CCHAHANGNGE OE OVVEER DR DEEVVICICE FE FRROOM 200-M 200-300 B300 BAARRCCOOMPMPL FL FOOR BR BAAUUEER CR COOMPMPRREESSSSOORR

395 709139

Bauer change over devices allow Junior / Oceanus compressors to be used for a number of pressure

applications. The 200 to 300 bar change over device comes complete in kit form for immediate use.

Benefits

• The red hand wheel on the filling gives you a safety precaution to differentiate the pressure the compressor is set at

• The simple bolt on kit requires you to have no specialist knowledge to install

• You can install on any Bauer compressors

• WSS global service support gives you assurance should you need any assistance or advice

Supplied with:

• Switch-over device EDP 528901

• Safety valve 330 bar EDP 646059

• Filling hose EDP 606168

• Filling valve 330 bar (red hand wheel) EDP 605253

718



CCOOMPMPRREESSSSOOR BR BRREEAATTHING AHING AIR QIR QUUAALLITITY TY TEESST KT KITIT

391 736660

The Unitor breathing air quality test kit measures

the purity of breathing air from high or low-

pressure cylinders and compressors quickly,

easily, and accurately. IMO guidelines MSC/Circ.

850 recommend annual testing of your air

quality from BA sets, escape sets and breathing

air compressors. The air quality should confirm

to EN 12021.

Features

• Can measure 4 gases simultaneously

• Ready to use

• Uses readily available testing tubes

Technical data

Operational medium Air

Max pressure 300 bar

Flow preset for CO & CO2 tubes 0.3 Ltr/min

Flow preset for H2O tubes 1 ltr/min

Flow preset for oil tubes 2.5 Ltr/min

Flow preset for nitrous gases tubes 0.3 ltr/min

Benefits

• Our kit enables you to accurately measure carbon

monoxide, carbon dioxide, water, oil and nitrous

oxide levels in breathing air

• Preset settings of the flow rate for the gases to be

measured enables you to use the kit instantly

• Tubes are clearly arrow marked for use with the kit

giving you quick and easy to understand results


Supplied with:

• The test device, consisting of a pressure reducer,

pressure gauge and detector tube holder

• Adapter for connection to a compressor charging

panel (for DIN charging connection 300 or 200 bar)

• Timer

• Flow meter

• Tube breaker for breaking detector tube tips

• Detector tubes (package of 10) for measuring CO,

CO2, water vapor and oil. The standard case

contents one pack of each of the four types of

detector tubes. In addition the case has space for

storing four additional spare packages.

Test tubes for nitrous oxide measurement are

available on request.


661553 Detector tubes CO

661728 Detector tubes H2O

734723 Detector tubes CO2

734715 Detector tubes oil

735373 Detector tubes NO2

719


Filter Masks / Breathing Filters

BBRREEAATTHING FHING FILILTTEER MAR MASSKKSS

WSS provides a comprehensive range of

respiratory protection equipment covering a

multitude of hazards, whether gaseous or

particulate.

You can chose from a range of cost effective

masks and filters that meet your requirements

and comply with health and safety regulations.

Features

• You can choose from a range of half or full masks with quick interchangeable filters

• Our Advantage 3000 range is available in three sizes

• Airtight and comfortable face seals and harness

• We supply globally and provide global technical support

Benefits

• The interchangeable filters reduces the numbers of masks you need to provide on board

• Your choice of three sizes will deliver excellent comfort for all users during hazardous situations

• Our global support helps you comply with both national and international health and safety regulations



667154 Advantage 200 Half Mask

650358 Advantage 3200 Small Bayonet filter

650366 Advantage 3200 Medium Bayonet filter

650357 Advantage 3200 Large Bayonet filter

650382 Advantage 3100 Small Threaded filter

650390 Advantage 3100 Medium Threaded filter

650408 Advantage 3100 Large Threaded filter

720



AADDVVAANTNTAAGGE 3121 SE 3121 SINGINGLLE FE FILILTTEER TR THRHREEAADDEED MED MEDD..

391 650390

The Advantage 3121 series is a dual filter

system which gives you high degrees of

flexibility with a range of single and combi

hazard filters. It is manufactured from

hypoallergenic soft-feel silicones providing you

with a pressure-free fit and extreme comfort.

Features

• Threaded filter connections

• Large, optically corrected lens providing a clear, undistorted view

Benefits

• Innovative harness design and choice of 3 sizes means excellent comfort for all users during hazardous situations

• Interchangeable filters reduce the number of masks needed on board

• WSS global service network support

Technical data

Approvals EN 14387 and EN 143

Applications

Asbestos Abatement,

Welding,

Sanding & Grinding

Painting

Size Medium

The Advantage 3121 full face mask is ideal for applications

where onboard personnel are exposed to various hazardous

fumes, mists and gases. Besides its functionality we have

provided a large, optically corrected lens which ensures a

clear, undistorted view.

The Advantage 3121 has a full line of particulate, chemical

and combination cartridges, approved according to EN

14387 and 143. To meet your individual needs you can

choose different combinations as per your need by referring

to the 'Accessories' tab.

Accessories


650424 AX Filter

650465 E2 Gas Filter

650473 K2 Gas Filter

650481 P3 Dust Filter

650499 A2/B2/E2/K1 Gas Filter

650507 A2/B2/E2/K2 Gas Filter

650515 A2-P2 Combi filter

650523 B2-P2 Combi filter

650606 A2/B2/E2/K1/HG/P3 Combi filter

650614 A2/B2/E2/K2/HG/P3 Combi filter

650630 A1/B2/E2/K1/CO/NO/P3 Combi filter

721



BBRREEAATTHING MAHING MASSKKS FS FILILTTEER RR RAANGNGEE

WSS provides a comprehensive range of respiratory protection equipment covering a multitude of

hazards, whether gaseous or particulate.

You can choose from a range of filters to meet your particular hazard in either threaded or bayonet

fitting, dependant on the mask type.

Choice and flexibility provide you with many options and our combi filter range allows you to cover dual

hazards with one solution.

Features

• You can choose either single or duo combination filters

• Our simple click or screw filters provide efficient and quick service and maintenance times

• This filter ranges cover both gaseous and particulate hazards

Benefits

• Interchangeable filters reduce the number of masks you need to provide on board

• You will benefit from comfort through easy breathing technology

• Our global support augments your ability to comply with both national and international health and safety regulations

722


Compressed Air Breathing Apparatus

SSEELLF CF COONTNTAAINEINED BD BRREEAATTHING AHING APPPPAARRAATTUUSS

The Unipack self contained breathing apparatus

covers fire fighting, chemical or gaseous hazard

protection for the offshore, shipping or land

based markets giving you flexible options for the

level of protection you require.

You can also choose a supplementary second

air option to add a rescue mask or if you want

to use in conjunction with your gastight

chemical suit.

Features

• Wide range of adjustment on the ergonomically designed back plate

• Wide range of uses

• Latest technology fixed demand valves

Benefits

• Flexible adjustment gives you the option to cover a wider size range so require fewer units

• You can use the Unipack in conjunction with our chemical suit range or choose the second air for rescue situations

• Our state of the art fixed demand valve allows you to don the unit quickly and requiring minimal maintenance costs

• We can individually tailor your Unipack requirements with our range of optional accessories to meet your specific

needs

Accessories


757879 Unipack II BA set without cylinder

757881 Unipack II with supplementary air connection without cylinder

667279 Rescue Mask with 1.5 metre hose for Unipack II supplementary air set

690412 6 litre 200 bar steel cylinder filled



739961 6.8 litre 300 bar composite cylinder filled

Additional accessories:

• WSS can also supply cylinders with no air charge

• Communications equipment also available on request

• For hose connections for chemical suits see the

relevant suit type

Approvals

MED approved

723


Emergency Escape Breathing Device

UUNISNISCCAAPPE EE EEEBBDD

The Uniscape 15-H is a 15 minute compressed

air emergency escape breathing device (EEBD)

providing users with respiratory protection

during escape from toxic or oxygen deficient

atmospheres. It can be carried or kept in

readiness close to the workplace for immediate

access in case of emergency.

This version comes supplied with air and is

ready for placement on board.

Features

• Fast automatic activation

• One size hood

• Clear vision

• Low maintenance

Technical data

Size (Lt x Dia) 600 x 250 mm

Weight Approx 4Kg

Service time 15 min

Air cylinder 3 ltr / 200 bar - steel

Benefits

• The clear instructions on the case ensure any non-

trained people can use quickly

• The encapsulated hood has sufficient adjustment in

the neck seal to fit most of your crews' head sizes

• Our large visor gives you an unobstructed clear view

to aid your escape

• We can supply either with or without air to assist your

freight requirements

Characteristics

A fast method of operation permits air to pass from the

compressed cylinder into a flexible hood which can be

slipped over the head in a fast manoeuvre without

complicated adjustment. It provides protection to any

wearer, including those with a beard and/or spectacles.

Cylinder and bag

The compressed air cylinder is manufactured in accordance

with EC 84/525, 97/23 and 1999/36 or if applicable, to

national regulations. It is carried and fixed in the bag. The

pressure indicator is readable through a window. The

duration time for the apparatus and pictorial user

instructions are noted on the bag. When pulling the firing

strap the anti-tamper tag breaks, the airflow starts and the

bag is opened so that the hood can be taken and be pulled

over the head.

Note! The air supply shall meet the requirements for

breathable air of EN 12021 or USCGA grade D (or better).

Regulator / cylinder valve

The regulator is mounted on the cylinder. The regulator has a

quick start function. By pulling the firing strap the cylinder

valve is opened in one movement. When the firing pin is

drawn the airflow starts.

Hood

The hood assembly consists of a bright yellow hood, an

inner mask, a visual alarm indicator in the field of vision and

the air supply hose.

• The visor is designed for maximum field of vision

during escape

• The visual indicator shows duration status information

and indicates when to remove the hood as the

cylinder is emptied

• The inner harness provides automatic and easy

adjustment for the inner mask

• The neck seal accommodates a wide range of fits

and needs no adjustments after donning

724



668913 Uniscape 15 minute emergency escape breathing device with air

669473 Uniscape 15 minute emergency escape breathing device without air

Accessories


638395 Uniscape Cabinet

628164 Uniscape Wall Bracket set

632760 Covers for Uniscape wall bracket set

Approvals

MED approved. It has been designed and tested in

accordance with EN 1146 and has demonstrated to be

compliant with the safety requirements of EC Directive 96/98

Marine Equipment.

725

SSAAFFEETTYY Personal Protection

Chemical Protection

CCHEHEMICMICAAL SL SUUITITSS

Making mistakes is part of the human condition

and people working with hazardous chemicals

are particularly at risk. Even though risk

assessment is done, serious accidents can and

do occur. A Trellchem protective suit will give

you the best protection when accidents occur

or daily work is a high risk situation.

Features

• Rubber, Viton or PVC options

• Positive pressure air supplied or splash only

• Bayonet glove ring system on pressurised suits

Benefits

• Our 3 materials offer differing levels of protection to suit your particular hazard

• You have a choice dependant on your risk of either splash only or positive pressure suits

• The Trellchem bayonet system for gloves gives you a positive seal ensuring it is gastight

Technical data

Pressurisation

Airflows can be set at either 2 or 30 litres per minute

with BA sets or optionally 30 or 100 litres when

operating with an external airline

All Trellchem positive pressure suits increase your safety and

can either be fed by BA sets giving you total freedom of

movement or by connecting to a hose from your vessels air

supply. This pressurised system with varying airflow levels

gives you protection against leaks, for example by accidental

perforations, and also provides the suit with ventilation.

Approvals

MED approved

726


Chemical Protection

CCHEHEMICMICAAL RL REESSISISTTAANT PNT PEERRSSOONANAL PL PRROOTTEECCTTIOIONNKKITIT

394 576843

The Unitor chemical resistant personal

protection kit protects you against splashes

when filling or opening drums, moving

chemicals around or mixing them.

We supply a complete one size kit, except for

the boots, giving you good levels of protection

against hazardous chemicals.

Features

• Helmet with visor cap and bib

• Goggles, suit, apron and gloves

• MED approved

Benefits

• The fully approved helmet includes a visor for splash

protection in your face

• Additionally we supply goggles that can be worn under the visor to ensure your eyes are fully protected

• The suit is a one piece protecting your body from any harmful splashes plus we add an apron as added protection

for the suit

• As most work is done with the hands it is imperative to protect them so we include gauntlets to give full hand and

lower protection

Helmet assembly - White safety helmet to EN397, high-

density polyethylene shell, low-density polyethylene head

harness, acetate visor BS2092 Grade 2 chemical

Goggles - EN166 1C

Gloves - Rubber gauntlet 43 cm long, EN374

Suit - Blue PVC with elasticated hood, single elasticated

sleeves, elasticated single legs, polyester/nylon zip with

double storm flap over and press stud closure;

size large, chest 112 cm

Apron - Blue PVC apron 76 x 93 cm with eyelet and tapes



576843 Unitor chemical resistant personal protection kit

571018 Chemical safety boot size 42




727


Chemical Protection

TTRREELLLLCCHEHEM SM SUUPPEER TR T-E-ETT

The Super T-ET chemical & gastight suit

provides excellent protection against hazardous

chemicals in liquid, vapor, gaseous and solid

form. The mini hood fitted as standard protects

you against inward leakage between mask and

face seal, in case of jet spray from behind. A

mid level protection suit ideal for working

confined space.

Features

• Includes mini hood

• BA worn outside of suit

• Positive pressure suit

• MED approved

Technical data

Abrasion resistance. EN 530, method 2

Flex cracking ISO 7854, method B

Flex cracking at -30 Deg.C ISO 7854, method B

Trapezoidal tear resistance ISO 9073-4

Tensile strength ISO 13934-1

Puncture resistance EN 863

Resistance to flame EN 13274-4, method 3

Seam strength ISO 5082

Antistatic EN 1149-3, EN 1149-5

Benefits

• You can use the Super T-ET with most standard BA

sets with supplementary air connections

• Available in 3 sizes for correct fit and high comfort

• The polyamide fabric coated with Viton and Butyl

rubber gives excellent protection against acids,

alkalis, solvents, petrochemicals and warfare agents

• We can advise on the correct hoses and fittings if we

know type of BA sets on board

Supplied with: Chemical resistance table, Storage bag, suit

hanger, instructions for storage, Record card for use and

chemical exposure


Product number Description Size Height Chest

758250 Trellchem Super T-ET with mini hood,without hose Small 170-182cm 88-96cm

740530 Trellchem Super T-ET with mini hood,without hose Medium 176-188cm 92-100cm

740555 Trellchem Super T-ET with mini hood,without hose Large 182-194cm 96-104cm

Accessories

L39499 Repair kit for Trellchem Super

749861 Molykote grease for Chemical suits

669358 Unipack BA set hose with outlet for 2nd air unit

669366 Unipack BA set hose

605204 Trellchem hood for BA set protection

749838 Viton butyl gloves for VPS/Super and Light Trellchem suits

723056 Spare or additional mini hood

728

TTRREELLLLCCHEHEM LM LIGIGHT THT T

The Light T chemical and gastight suit is soft

and durable giving you excellent protection

against hazardous chemicals in liquid, vapor,

gaseous and solid form. It is ideal for you to use

in confined spaces, short periods of working

and less aggressive environments. We provide

you with global network support for your

chemical suits both for service and repair.

Features

• Light-weight and high comfort



• MED approved

Technical data

Properties METHOD



Flex cracking at -30 Deg.?C ISO 7854, method B







Benefits

• You can use the Trellchem Light with most standard

BA sets with supplementary air connections

• It is available in 2 sizes to give you a correct fit

• The polyamide fabric is coated on both sides and

gives you excellent protection against alkalis, acids,

oils, alchohols and aliphatics

• You will need to notify us which type of BA set you

have on board so we can advise on the correct hoses

and fittings



538918 Trellchem Light T Chemical suits without hose Medium 136-188cm 92-100cm

538926 Trellchem Light T Chemical suits without hose Large 182-194cm 96-104cm

Accessories

L277 Repair kit for Light and Splash type Trellchem chemical suits







749846 Gloves for Trellchem Light and Splash chemical suits

571018 Size 42 Chemical safety boot




729

TTRREELLLLCCHEHEM VM VPPS TS T-E-ETT

The VPS T-ET chemical & gastight suit is perfect

when carrying mixed or constantly changing

cargoes. Higher levels of protection offer a

greater resistance across a broader range of

hazards. The mini hood fitted as standard

protects you against inward leakage between

mask and face seal.

Features

• Includes mini hood

• High comfort



• MED approved

Technical data

Properties METHOD




Tear resistance warp/weft ISO 9073-4

Tear resistance warp/weft ASTM D 2582


Burst Strength ASTM D 751



Resistance to ignition EN 13274-4, method 3

Flammability resistance AST F 1358

Benefits

• You can use the VPS T-ET with most standard BA

sets with supplementary air connections


• Well proven combination of rubber and a multilayer

chemical barrier provides excellent chemical protec-

tion for over 8 hours against a wide range of

chemicals including war agents, as well as great

abrasion and flame resistance

• Notify us which type of BA set you have on board so

we can advise on the correct hoses and fittings

Meets the following standards:

• NFPA 1991

• EN 943-1 and EN 943-2/ET

• EN 1073-2

• EN 14126



723023 Trellchem VPS T-ET with mini hood,without hose Small 170-182cm 88-96cm

723031 Trellchem VPS T-ET with mini hood,without hose Medium 136-188cm 92-100cm

723049 Trellchem VPS T-ET with mini hood,without hose Large 182-194cm 96-104cm

Accessories

739029 Repair kit for Trellchem VPS chemical suit







730


Chemical Protection

TTRREELLLLCCHEHEM SM SPPLLAASSH 600 SH 600 SUUIT WIT WITITHOHOUUT BT BOOOOTTSS

The Splash 600 suit gives you basic protection

against chemical splash and spray in low-risk

environments. It offers you especially good

protection against acids and alkalis and is

available in 3 sizes to maximise your comfort fit.

We provide you with global network support for

your chemical suits both in service and repair.

Features

• Non-encapsulating design

• Can be used with BA set or filter masks

• Elasticated legs, drawstring hood

Technical data

Material Properties METHOD

Abrasion resistance EN 530, method 2









Benefits

• You can use the Light T with any standard BA sets

you have on board


• The Trellchem® Splash material is made of a strong

PVC coated fabric providing you with a soft and

durable material

• It gives you good resistance to a wide range of

industrial chemicals, especially acids and alkalis



723296 Trellchem Splash 600 Chemical without boots Size Small Small 170-182cm 88-96cm

723304 Trellchem Splash 600 Chemical without boots Size Medium Medium 136-188cm 92-100cm

723312 Trellchem Splash 600 Chemical without boots Size Large Large 182-194cm 96-104cm

Accessories

L27763 Repair kit for Trellchem Light and Splash chemical suits

749861 Molykote grease for chemical suits

749846 Gloves for Trellchem Light and Splash chemical suits





731


Chemical Protection

UUNIPNIPAACCK HOK HOSSE FE FOOR CR CHEHEMICMICAAL SL SUUITITS SS SUUPPEERR/V/VPPSS//LLIGIGHT SHT SUUIT OIT ONLNLY CY COONNENNECCTTIOIONN

391 669366

The Unitor Unipack BA set connection hose for

Trellchem Super/VPS/Light chemical gastight

suits fits into the supplementary air supply.

Simply click and go into any of your suits with a

similar fitting gives you flexibility for your BA

sets.

Features

• Bayonet fitting

• For Trellchem Super/VPS/Light Chemical suits

Benefits

• Simple click and go

• You can standardise your Unipack BA set even if you have different suits on board with the same fitting

UUNIPNIPAACCK HOK HOSSE FE FOOR CR CHEHEMICMICAAL SL SUUITITS SS SUUPPEERR/V/VPPSS//LLIGIGHT SHT SUUIT AIT AND RND REESSCCUUE MAE MASSK CK COONNENNECCTTIOIONSNS

391 669358

This Unitor Unipack connection hose for

chemical & gastight suits gives you a secondary

connection point to allow fitting of a rescue

mask set.

You can use either as a feed for your suit or

quickly click and go to add a rescue set to giving you the freedom of movement during rescues whilst

wearing your gas tight chemical suit.

Features

• Bayonet fitting

• For Trellchem Super/VPS and Light type chemical gas tight suits

Benefits

• Simple click and go

• You can standardise your Unipack BA set even if you have different suits on board with the same fitting

732


Chemical Protection

CCHEHEMICMICAAL SL SUUIT SIT SAAFFEETTY BY BOOOOTTSS

Our nitrile rubber safety boots are a firefighter

certified boot giving you high flame and

chemical resistance. They are impervious to a

wide range of chemicals and biological hazards

ensuring your protection in multi-hazard

environments. These are the standard boot for

all Trellchem rubber based gastight suits.

Features

• Steel toe cap and midsole

• Anti-static

• Cold insulating

• Available in sizes 42 to 45

Benefits

• Yellow to identify with chemical clothing

• Resistant to minerals, animal and vegetable oils and fats, disinfectants and various chemicals


• EN 20345 type S5 HRO SRC

• EN 15090 type F3A



571018 Size 42 Chemical Suit safety boot




733


Chemical Protection

TTRREELLLLCCHEHEM CM CHEHEMICMICAAL SL SUUIT HOIT HOOOD FD FOORRFFAACCEEMAMASSK & BK & BA SA SEETT

394 605204

Many BA sets may not be chemical-resistant so

it important when wearing non-encapsulating

suits to protect them also. Our Trellchem hood

will protect all your BA sets and allow you to

maintain visual sight of the BA sets gauges. The

visor increases your facial protection and will not

hamper your vision.

Features

• Gives protection to BA sets

• Re-usable

• Does not impede when working

Benefits

• It is fitted with a long zip in one side to can put on

easily and quickly

• There are two slit openings on the chest to allow you to read the gauge

• You exhale your air through an outlet valve in the back of the hood

TTRREELLLLCCHEHEM CM CHEHEMICMICAAL SL SUUIT MINI HOIT MINI HOOODD

394 723056

The additional or spare mini hood for use with

VPS T-ET and Super E-ET chemical and gas

tight suits gives you greater protection. It is a

simple hood with elastic to fit around your mask

and tightens under your chin. When fitted, the

mini hood protects you against inward leakage

between mask and face seal, in case of jet

spray from behind.

Features

• Increases head protection

• For use on VPS/Super/Light Trellchem chemical suits

• Soft, flexible polyamide fabric coated with PVC

Benefits

• Increases your head protection from rear sprays or leakages

• It is light-weight and flexible, providing unrestricted head movement

• The wide face aperture will not restrict your vision

734


Chemical Protection

GGLLOOVVEESS, V, VITITOON/BN/BUUTTYYL FL FOOR TR TRREELLLLCCHEHEM VM VPPS &S &SSUUPPEERR

394 749838

These outer barrier gloves are for use with VPS/

Super and Light type suits are a unique rubber

glove giving you excellent chemical resistance

to a wide range of chemicals, including warfare

agents and biological hazards. Hands do the

majority of work so it is important you protect them thoroughly. To ensure constant use of your

chemical suits it is always advisable to carry a spare set of gloves onboard.

Features

• Simple to replace onboard

• Provide abrasion resistance

• Include the bayonet ring

Technical data

DESIGN 5-finger protective rubber glove with rolled cuff.

MATERIAL Butyl rubber with an outer layer of Viton® rubber

THICKNESS 0.80 mm (nominal)

LENGTH 35 cm

COLOUR Black

Benefits

• Carrying a spare set maintains operational readiness

of your chemical suits

• The VPS/Super and Light bayonet system allows you

to replace gloves quickly and easily

• They are soft and flexible allowing you to carry out

most tasks

• These outer barrier gloves protect your hands from

abrasions and ensure your suit remains gastight

735


Chemical Protection

GGLLOOVVEES PS PVVC FC FOOR TR TRREELLLLCCHEHEM LM LIGIGHT AHT AND SND SPPLLAASSHH

394 749846

These Light and Splash type chemical suit

spare gloves can be used in conjunction with

the suits or as a stand alone protection. They

are nitrile chloroprene for excellent resistance to

chemicals and have a roughened area in the

palm to help you grip. To ensure constant use of

your chemical suits it is always advisable to

carry a spare pair onboard.

Features

• Good grip

• Good abrasion & weather resistant

• Very good chemical resistance

Benefits

• The roughened palm areas will improve your grip

• A combination of nitrile rubber and Chloroprene rubber ensure you get excellent working properties even in cold

weather

• The material also gives you good resistance against most chemicals


• EN 374

• EN 420

• EN 388

736


Chemical Protection

CCHEHEMICMICAAL SL SUUIT RIT REEPPAAIR KIR KITITSS

To keep you operational we provide a range of

repair kits to give you the opportunity to make

minor repairs to perforations. We also have a

global network of service stations to service

your suits providing you with a longer product

life.

Features

• Comprehensive kits

• 3 types

Benefits

• Comprehensive kits allow you to make repairs to

perforations

• All pressurised suits have their own type of kit

This pressurised system with varying airflow levels gives you

protection against leaks, for example by accidental

perforations, and also provides the suit with ventilation.



739029 Repiar kit for Trellchem chemical suits type VPS - chloroprene rubber

L39499 Repair kit for Trellchem chemical suit type Super - Viton material

L27763 Repair kit for Trellchem chemical suits type Light/Splash 600 - PVC materials

737


Chemical Protection

MOMOLLYYKKOOTTE GE GRREEAASSE FE F//OO-R-RING BING BAAYYOONENET ST SYYSSTTEEMM

394 749861

Molykote grease protects against salt water damage ensuring continual use.

Features

• For use on glove bayonet systems on chemical suits

Benefits

• Ensures your connections are smooth when required

Technical data

Color White

Density 1.02 grams per cc

Dropping Point 250 Deg C

Kinetic / Kinematic Viscosity 200 Centistokes

NLGI Number 2 to 3

Service Temperature (High) 180 Deg C

Service Temperature (Low) -50 Deg C

Shelf Life 1800 Days

Worked Penetration 245 mm/10 to 275 mm/10

738


Head Protection

HEHEAAD PD PRROOTTEECCTTIOIONN

Our range of head protection products give you

numerous options to suit your working

conditions. Whether you are working at height,

in cold temperatures, in confined spaces,

wearing a chemical suit or require increased

upward vision you can choose your helmet,

then from our range of modular accessories you

can enhance the level of protection you require.

Features

• 2 types of helmets, both with Staz-On suspension as

standard

• Separate or snap on hearing, visual accessories to

suit either helmet

• Head warmers for colder climate working

• Chin straps for helmet retention

Benefits

• Both helmets are lightweight but strong, giving your head freedom of movement and the brimless design of the

Linesman makes it ideal for you to use in chemical suits also

• Whether you want separate or snap on hearing or eye protection all accessories are suitable for use with our range

of helmets

• Additionally our range helmets meet the requirements for electrical insulation and low temperature use offering you

higher levels of protection

• The built in Staz-On suspension increases your level of head protection by absorbing knocks and bangs through the

harness



736520 V Guard helmet white with Staz on suspension

736538 V Guard helmet yellow with Staz on suspension

736546 Linseman helmet white with Sraz on suspension

736553 Linesman helemt yellow with Staz on suspension

Accessories


738989 Chinstrap webbing

739912 Stow-away Safety Visor - Clear

739003 Winter liner c/w Zip,knitted cape

736595 Ear Muff Type EXC passive helmet mounted

736587 Earmuff type EXC passive with headband

739


Head Protection

HEHEAAD PD PRROOTTEECCTTIOION AN ACCCCEESSSSOORRIEIESS

Our range of head protection accessories

enhance the safety and usage of your head

protection.

Whether you require keeping warm or eye or ear

protection all accessories are modular fit on any

of our helmets.

Features

• Increase safety

• Improve comfort

Benefits

• Chin straps and visors increase the levels of safety

whilst not hampering the overall performance of the helmet

• Improved comfort from the winter liners to keep you warm during cold climate working

• All accessories are designed to be light-weight and non-restrictive to give you free head movement

Accessories


738989 Chinstrap webbing for V guard and Linesman helmets

739912 Safety visor for V Guard and Linesman helmets

739003 Winter liner with zip and knitted cape for V Guard and Linesman helmets

736595 Ear Muff Type EXC passive helmet mounted

736587 Earmuff type EXC passive with headband

740


Hearing Protection

HEHEAARRING PING PRROOTTEECCTTIOIONN

The marine environment can be a noisy one

causing hearing damage if you do not take

sufficient safeguards.

To compliment our range of head protection we

offer a range of hearing protection items.

The wide soft padding and adjusters ensure you

enjoy a comfortable fit to aid maximum

protection.

Features

• Adjusters to fit sizes and helmets

• Unique moulded inserts

• Can be equipped with visors

Benefits

• We offer a wide range to suit personal preferences and comfort levels

• Light-weight and slim design gives good freedom of movement

• Designed over many years of experience of customer usage to ensure your protection

• Our range of helmets, visors and hearing protectors compliment each other, standardising your vessels equipment



736587 Ear Muffs with headband

736595 Ear muff for V Guard & Linesman helmet mounts

736603 Disposable Ear plugs non corded 200 per box

741


Personal Fire Protection

UUNITNITOOR FR FLLAAMEMEGGUUAARRD PD PLLUUS FS FIRIREEFFIGIGHTHTEER SR SUUIT KIT KITIT

The Unitor Flameguard Plus aluminised proximity suits are designed for rescue operations and fire

fighting where you are operating in temperatures ranging from 800-1000° Celsius. The outer layer of

aluminised fabric helps prolong your fire fighting operations as it reflects more than 90% of the heat.

Additionally you can complete your firefighter requirements from our range of breathing apparatus and

rescue equipment.

Features

The Flameguard Plus kit is a Ships Wheel and SOLAS approved fireman’s outfit comprising of helmet, jacket, trousers,

gloves and non-conductive gloves.

Firemans Outfit

• Complete suit

• Breathing apparatus

• Minimum of three 6 L 200 bar air cylinders (can vary

per regulation)

• Fire axe and pouch

• Leather belt

• Torch

• Noncombustible line

Our website contains all of the items to make up your

complete fire fighters outfit.


Product number Description Height Chest Waist Inside leg

775106 Unitor Flameguard MED 164-182cm 84-104cm 84-104cm 74cm

775114 Unitor Flameguard Large 170-188cm 96-116cm 96-116cm 79cm

775122 Unitor Flameguard XL 179-194cm 112-132cm 112-132cm 84cm

775130 Unitor Flameguard Size XXL 180-198cm 122-142cm 122-142cm 85cm

766803 Boots Size 41





766808 Boots Size 46/47

Approvals

MED approved

742



UUNITNITOOR FR FLLAAMEMEGGUUAARRD SD SOOLLAAS FS FIRIREEFFIGIGHTHTEER SR SUUITIT

Recently approved to the latest EN1612 the

Flameguard SOLAS is at the forefront of

technology with this approval class. Generously

sized, you can usually cover your crew sizing

from the large size alone, but for more particular

requirements you can choose from a full size

range.

Features

• Latest approvals

• New technology materials

• Complete kit for non-MED vessels including suit,

boots, helmet and gloves

Benefits

• This suit has recently been approved so will give you compliance for years to come

• New materials which improve the bonding of aluminium and the cotton backing provides a longer product life and

improved levels of usage performance

• The large is generously sized and with the braces and adaptable closures will cover a large proportion of your crew

particularly if you change them regularly

Firemans Outfit

• Complete suit



per regulation)

• Fire axe

• Leather belt

• Axe pouch

• Torch



complete fire fighters outfit.



775148 Unitor Flameguard Solas Med 164-182cm 164-182cm 164-182cm 74cm

775155 Unitor Flameguard Solas Large 170-188cm 96-116cm 96-116cm 79cm

775163 Unitor Flameguard Solas XL 176-194cm 112-132cm 112-132cm 84cm

775171 Unitor Flameguard Solas XXL 180-198cm 122-142cm 122-142cm 85cm

777464 Solas Fire fighters Boots Size 41







743

UUNITNITOOR FR FIRIREEBBUUDDDDY PY PLLUUS FS FIRIREEFFIGIGHTHTEER SR SUUIT KIT KITIT

The Unitor Firebuddy Plus firefighter's kit is our

top of the range suit using softer flexible

materials to give you more freedom of

movement. The Firebuddy Plus kit is a Ships

Wheel and SOLAS approved fireman’s outfit

comprising of helmet, jacket, trousers, gloves

and non-conductive gloves. Additionally you

can complete your firefighter requirements from our range of breathing apparatus and rescue

equipment.

Features

• The Firebuddy Plus suit is a two-piece garment with a four-layer construction

• The jacket has a stand up collar, elasticated cuffs, and is closed by a zip covered by an overlapping front with touch

and close fastening to the front and collar

• The trousers have wide elasticated braces with adjusters and quick-release buckles

• MED approved. Gloves,boots(ordered separately) and helmet EN approved in accordance with MED Ships Wheel

Benefits

• The 4 layer construction ensures thermal protection whilst providing you with high comfort factors using breathable

materials

• Our softer materials even with 4 layers give you flexible movement which is a crucial element when you need to enter

confined spaces or be physically active

• The touch and close fastening and elasticated trouser braces allow you to don the suit quickly

• Our suit sizing is generous allowing you the choice to wear additional clothing

Firemans Outfit

• Complete suit



per regulation)

• Fire axe

• Leather belt

• Axe pouch

• Torch



complete fire fighters outfit. All the main elements of the kit

are available as spares which extends the useful life of these

fire fighting kits.



775620 Unitor Firebuddy Plus Kit Med 164-182cm 84-104cm 84-104cm 74

775621 Unitor Firebuddy Plus kit Large 170-188cm 96-116cm 96-116cm 79

775622 Unitor Firebuddy Plus kit XL 176-194cm 112-132cm 112-132cm 84

775623 Unitor Firebuddy Plus kit XXL 180-198cm 122-142cm 122-142cm 85

766803 MED Approved Fire fighters Boots Size 41


766805 MED Approved Fire fightersBoots Size 43


766807 MED Approved fire fighters Boots Size 45

766808 MED approved Fire fighters Boots Size 46/47

744



FFIRIREEMAMANS HENS HELLMEMET - PT - PAAB HTB HT0404

394 774943

The firefighter helmet of tomorrow.

It is designed to protect the head in the most

extreme conditions. Development of new

composite technology in combination with

established designs enable full protection even

at shorter flash over flames, reaching up to

1000 °C. Extremely lightweight (1,350 g) and

fitted lugs that support a wide selection of

compatible accessories.

Features

• Includes visor and neck curtain

• Light-weight and high comfort

• Visor approved for use in fires

• MED approved

Benefits

• You can use with any marine fire fighting kits onboard your vessel

• Visor folds inside helmet when not used for added protection and is not in your line of vision

• The helmet and visor both give you high impact resistance for clearing debris or during fire fighting operations

• The generous sizing of 52 to 63 cm will cover the majority of your crew sizes

Technical data

• Light weight of only 1,350 g (including visor face

shield and neck protector)

• Extreme temperature resistance (up to 1,000° C) in a

10 seconds flash over flames

• Long-term resistance to 250° C / 30 min, radiant heat

test 14 KW / m2

• More resistant to mechanical impacts than any

standard helmet

• Latest European standards conformity (EN 443/2008)

• Full head protection, including neck and face

• PES anti-scratch and anti-fog coated visor resistible

to up to 300° C (EN 14458)

• Aluminized carbon-fiabre neck protection

• Interior shock absorber made of polyurethane foam

• Integrated adjustment system (ranging from 52 – 63

cm)

• Interior ventilating channels enable safe and

comfortable work

• Luminescent and reflective tapes visible from all sides

and in all conditions

• Nomex chinstrap - tested to prevent skin irritations



774943 Firemans Helmet - PAB HT04

777538 LED Lamp for PAB Fire fighters helmet

777539 LED Lamp holder for PAB fire fighters helmet

745



LLEED LD LAAMP FMP FOOR FR FIRIREEMAMAN HEN HELLMEMET PT PAABB

394 777538

Your job is faster and more efficient when you

are able to use both hands. Holding a flashlight

when attempting an important task is just not

an option, especially when fire fighting. Our

simple click-in LED lamp gives you usage

options and is quick to change batteries if

needed. The lamp holder needs to be ordered

separately.

Features

• Simple click fit

• Light-weight

• ATEX approved

Technical data

Battery type 4 AA Alkaline / LR6

Output time 4-5 hours

Beam distance 99.97 metres

Benefits

• You simply click it into the holder on your helmet

• It is extremely lightweight so does not restrict or

reduce your head movement

• It is approved for use in hazardous zones so you can

use it during rescues as well as fire fighting duties



774943 Firemans Helmet - PAB HT04

777538 LED Lamp for PAB Fire fighters helmet

777539 LED Lamp holder for PAB fire fighters helmet

Approvals

Meets the following American standards:

• UL (US, Canada) approved

• CL I, DIV 2, GP A, B, C, D, CL II, DIV 2 GP F, G, CL

III, DIV 2 T4'

• UK4AA-AS2ZM

746

CCAABBINEINET FT FOOR FR FIRIRE FE FIGIGHTHTEERRS OS OUUTTFFITIT

394 592576

Our range of GRP cabinets is built to last the

rigours of the marine environment. Well proven

through many years of supply in numerous

markets from offshore and cruise to general

marine, our cabinets offer flexible options

offering you a choice dependent on your

stowage need.

Features

• GRP

• Stainless steel hinges and fittings

• Waterproof

• Clear labelling

Technical data

Length 595 mm

Width 630 mm

Height 1120 mm

Capacity 1 Fire Fighters kit

Benefits

• Offers a large capacity so you can stow multiple

products if required

• Our manufacturing process and stainless steel fitting

means a longer product life

• Options include floor or wall mounted versions

enabling you to maximise your space

• For total protection of your equipment you can

choose internal fittings to be included

747



FFIRIRE AE AXXE WE WITITH INSH INSUULLAATTEED HAD HANDNDLLE 2 KE 2 KVV

394 534958

When time matters this insulated fire axe offers

you sufficient rating to cover most ships

electrical voltages. Tested to 2 kV with a

separated handle you can be assured of

performance when tackling fires onboard.

Features

• Insulated handle

• Corrosion resistant

• Ergonomic grip

Benefits

• Non-ageing insulated handle for longer life giving you

excellent protection

• It is impact proof so will not shatter when you are

tackling solid metals

• The axe head is SAE1055 steel a proven workhorse of the rescue industry

Accessories


525519 Leather Fire Axe cover

534966 Wall brackets

CCOOVVEER FR FOOR FR FIRIRE AE AXXEE

394 525519

You can either use the fire axe cover separately

or attach to a waist belt to free your hands

when working. Quick snap closure allows you

instant access even with wearing fire gloves.

Will fit all of our fire axe range.

Features

• Suits products 525535/176842/755314

• Toughened leather

Benefits

• Can be used in storage or attached to your waist belt

• Prevents accidents when working whilst also giving

instant access

• Riveted seams provide longer life and increased durability

748



GGLLOOVVEES FS FOOR FR FIRIREEBBUUDDDDY PY PLLUUS FS FIRIREEFFIGIGHTHTEER SR SUUITIT

392 775361

PalmBuddy gloves have been designed to give

you a comfortable and flexible feel while

maintaining a high degree of protection. The

gloves have a waterproof, breathable lining

which also gives you chemical resistance. Your

protection against penetration and cuts is

provided by the kevlar lining.

Features

• Water resistant leather made from outer cow split

suede

• Knitted wrist with kevlar cuffing

• Aramid kevlar lined with Hipora moisture barrier

• Light-weight of 250 g

Benefits

• You can wash these gloves with your clothing after use

• Multi-sized will fit most, ensures most of your crew can wear them

• A knitted wrist fits well into your outfit and will keep your hands dry

• The leather is a soft feel making these gloves comfortable to wear

Approvals

Tested and approved to EN659 and Marine Equipment

Directive (MED) 96/98/EC as modified by Commission

Directives 98/85/EC, 2002/75/EC and 2002/84/ EC also

covered by PPE Council Directive 89/686/EC.

749



FFIRIREEFFIGIGHTHTEERRS SS SUUIT INSIT INSUULLAATTEED GD GLLOOVVEESS

392 775379

Your latex gloves provide you with a high

dielectric performance giving you added

protection when wearing leather gloves as part

of a firefighter's outfit. You must use them with

outer leather gloves for mechanical protection.

Being soft latex and ergonomically shaped they

can be put on quickly and are comfortable to

wear.

Features

• Full compliance with the EN 60903 and IEC 60903 as they place in the high Class 00

• Good heat insualtion

Benefits

• Used in conjunction with your firefighter outfit they will protect against electric shocks

• They are particularly useful when using an insulated axe for cutting through cables

• As an added benefit when fire fighting they also offer extremely good heat insulation

750



SSOOLLAAS FS FIRIREEFFIGIGHTHTEER BR BOOOOTTSS

Unitor SOLAS firefighter boots are for use with

non-MED approved fire fighters suits.

These fire resistant wellingtons with flexible

rubber uppers, sanitised linings and slip

resistant sole pattern are ideal for when you

need to climb ladders. You can use these boots

for general working also.

Features

• For use only on SOLAS approved firefighter suits

• Generously sized

• Protective toe cap to EN20345

• Sanitised linings

Benefits

• Approved to EN20345 ensures the quality of these boots to be used on your non-MED firefighter outfits

• Flexible uppers give you good levels of comfort and freedom of movement

• The sole pattern gives you good grip when climbing ladders or working on wet surfaces

• The sanitised linings help reduce foot odours



777464 Solas Fire fighters boots Size 41







751



FFIRIREEFFIGIGHTHTEER BR BOOOOTTS - MES - MED AD APPPPRROOVVEEDD

Our fire-resistant wellingtons with flexible rubber

uppers, sanitised linings and slip resistant sole

pattern are ideal for either emergency situations

or as a general working wellington.

You have a good range of sizes to choose from

and can be assured the testing and certification

of these boots makes them a high quality

option.

Features

• Fire-proof nitrile rubber

• Polymer toe cap

• Composite antiperforation mid-sole

• Chemical resistance

Benefits

• These boots are suitable for your emergency situations, fire fighting or incidents involving the release of hazardous

chemicals

• They give protection against numerous other hazards including fuels, greases, solvents, weak and diluted acids

• They are a tough long lasting boot which boasts excellent resistance to cuts and abrasions

• We also provide a good size range to choose from



766803 Fire fighters boots Size 41





766808 Fire fighters boots Size 46/47

Approvals

Complies with the following standards:

• EN 15090 type 3 - boots suitable for emergency

situations or fire involving release of hazardous

chemicals that can cause loss of life

• EN20345 - S5 HRO SRC, heel energy absorption,

antistatic, contact heat resistance (HRO)

• EN 13832-3 J K R - boots highly resistant to

chemicals including, n-Heptane (J), Sodium

Hydroxide(K), Sodium Hypochloride (R)

• EN 13287 - Sole slip resistance (SRC) on ceramic

and steel flooring

752



FFIRIREEFFIGIGHTHTEER LR LIFIFEELLINEINE

For use with firefighter suits or as a general aid

these 30 metre lifelines are attached by means

of a snap-hook to either the harness of the

breathing apparatus or belt. These lifelines

provide users with the means to escape back

following an entry route or for rescuers to follow

a path.

Available in 30, 45, 60 or 90 metre lengths.

Features

• Galvanized steel cable IRWC 6 x 19, PP fibre core 5

mm with a Trevira CS braiding

• 6.6kn breaking strength

• Snap hook and karabiner fittings

Benefits

• In the event of a snag you can unclip quickly

• These hard wearing lines will not wear away when rubbing against corners when you are moving around

• They are suitable for use in your helideck rescue equipment


Product number Description Breaking strength

176826 30 metre Non combustible lifeline 6.6kn




753


Portable Gas Detection

OOXXYY, T, TOOXXI & GI & GAASS-MA-MATTEE

Whilst working on the vessel your mind is not

always focused on threat of reduced Oxygen or

a build up of toxic or disasterous flammable

gases. Our Unitor Oxy, Toxi & Gas-Mate range

of gas detectors is the best companion for you

with easy single button operation.

Features

• Rugged & robust IP65 dust ingress protection

• High audible alarm with vibrate and visual dual colour

flashing LEDs

• 4800 event / alarm record with 900 hour capacity

• Moulded rubber casing to withstand the toughest

marine environment

• MED approved

Benefits

• With a market leading 4800 event data record you can be sure that safety and alarm records can be retrieved at the

touch of a button

• Our unique one button operation is easy to use and allows you to keep your other hand free for other tasks

• The rugged & robust design means that the unit is suitable for use in a marine environment

• The lithium-ion battery gives you 12 hours of continuous use between charges

• The audible, visual alarm, vibrate and confidence blip allow you to concentrate on the job in hand



724880 Unitor Oxy-mate gas detector package O2 non-rechargable

724922 Unitor Oxy-mate gas detector package O2 rechargable

724948 Unitor Toxi-mate gas detector package for CO rechargable

724963 Unitor Toxi-mate gas detector package for H2S rechargable

724898 Unitor Toxi-mate gas detector package for H2S non-rechargable

724906 Unitor Toxi-mate gas detector package for CO non-rechargable

724989 Unitor Gasi-mate gas detector package for Ch4 rechargable

777540 Unitor Gasi-mate gas detector package for H2 rechargable

Accessories


725143 Carry Case

725127 Aspirator assembly (manual ball pump 2m hose)

656819 Aspirator hose 10m

656835 Aspirator probe 1m

656843 Aspirator probe telescopic - 1m

656876 Shoulder Strap for Oxy, Toxi & Gas-mate detectors

754



CCOOMBMBI-MAI-MATTEE

The Combi-Mate is a lightweight intrinsically

safe MED approved portable multi-gas detector

designed to be carried or worn by individuals

working in the toughest of marine environments.

Features a durable moulded rubber case,

simple one button operation and the safety of

audible, visible and vibrating alarm warnings.

Combi-Mate is capable of simultaneously monitoring up to four toxic, flammable, or oxygen gases to

preset calibration levels.

Features

• Top mounted LCD display

• Rugged & robust IP65 dust and water spray protection

• Lithium-ion 12 hour rechargeable battery

• High audible alarm with vibrate and visual dual colour flashing LEDs


• Moulded rubber casing to withstand the toughest marine environment

• MED approved

Benefits

• Our unique one button operation make the Combi-Mate easy to use and allows you to keep your other hand free for

other tasks

• The top mound display LCD display enables you to clip the unit to your person and have a good view of the screen

whilst having both hands free to work

• The rugged & robust design enables the unit to float if accidentally dropped in liquid

• The audible, vibrate & visual alarm and confidence blip allow you to concentrate on the job in hand

• With a 1500 event data record you can be sure that safety and alarm records can be retrieved at the touch of a

button

• The rugged construction ensures durability of your unit to continuously safeguard you in a marine environment

• The built-in sampling pump allows you to detect harmful gases without having to enter the hazardous area



739413 Unitor Combi-mate gas detector package O2+CH4+H2S+CO with pump

708883 Unitor Combi-mate gas detector package O2+C4H10+H2S+CO with pump

708875 Unitor Combi-mate gas detector package O2+C4H10+H2S+CO with pump

724807 Unitor Combi-mate gas detector package O2+H2S+CO with pump

724765 Unitor Combi-mate gas detector package O2+CH4 with pump

724823 Unitor Combi-mate gas detector package O2+CH4+H2S with pump

709261 Unitor Combi-mate gas detector package O2+C5H124+H2S

719914 Unitor Combi-mate gas detector package O2+CH4+H2S+SO2 pumped

719641 Unitor Combi-mate gas detector package O2+C5H12+CO+NH3

755


709287 Unitor Combi-mate gas detector package O2+C5H12+CO

709253 Unitor Combi-mate gas detector package O2+C5H12

709609 Unitor Combi-mate gas detector package O2+CH4+CO+NH3

709279 Unitor Combi-mate gas detector package O2+C5H12+H2S

709295 Unitor Combi-mate gas detector package O2+C5H12+CO

709311 Unitor Combi-mate gas detector package O2+C5H12+H2S+CO

708834 Unitor Combi-mate gas detector package O2+H2S

708842 Unitor Combi-mate gas detector package O2+H2S

756817 Unitor Combi-mate gas detector package O2+C5H12+CO+NH3

New Unitor Combi-mate gas detector package O2+H2 with pump

New Unitor Combi-mate gas detector package O2+H2+CO with pump

new Unitor Combi-mate gas detector package O2+H2+PH3+AsH3+SiH4 with pump

Accessories


656918 Carry Case for Combi-mate

656884 Shoulder strap

656892 Chest harness kit for Combi-mate





657684 Drop line 6m

709428 Combi-mate gas test kit (non-pumped units) without gas cylinder

709436 Combi-mate gas test kit (pumped units) without gas cylinder

710087 Gas cylinder for Combi-mate gas test kit (CH4+O2+H2S+CO)

710954 Belt for Combi-mate carry case

708891 Calibration adaptor plate for Combi-mate non-pumped model

756

CCOOMBMBI-MAI-MATTE 3E 3

Our Unitor Combi-Mate 3 gas detector is a

light-weight, single button operated multi-gas

detector designed to be worn on your person or

carried and is capable of simultaneously

monitoring up to four gases and providing you

with warnings of hazardous gas levels to keep

you safe at work.

Features

• Rugged & robust IP65 & IP67 dust and water ingress protection


• High audible alarm with vibrate and visual dual colour flashing LEDs

• 3000 record and 1500 event / alarm record with 50 hour capacity

• MED approved

Benefits

• Our unique one button operation make the Combi-Mate 3 easy to use and allows you to keep your other hand free

for other tasks

• The top mounted LCD display enables you to clip the unit to your person and have a good view of the screen whilst

having both hands free to work

• The rugged and robust design means that the unit is protected from dust and water common in a marine

environment

• The audible, visual alarm, vibrate and confidence blip allow you to concentrate on the job in hand


button



725010 Unitor Combi-mate 3 Gas detector package for O2+CH4

725036 Unitor Combi-mate 3 Gas detector package for O2+CH4+H2S

725051 Unitor Combi-mate 3 Gas detector package for O2+CH4+CO

725077 Unitor Combi-mate 3 Gas detector package for O2+CH4+H2S+CO

Accessories


739101 Carry Case for Combi-mate 3

656900 Carry case and belt for Combi-mate 3

??? Chest harness kit for Combi-mate 3





657684 Drop line 6m

725135 Gas test kit for Combi-mate 3 without gas cylinder

656850 Water trap for aspirator hose

757

TTAANKNK-MA-MATTEE

Our Unitor Tank-Mate is a MED approved

intrinsically safe portable multi-gas detector

capable of monitoring up to four gases

simultaneously and providing you with warnings

of hazardous gas levels. Specially designed for

use in inert atmosphere, the IR sensors give you accurate gas measurements while the built-in pump

allows you to safely measure gas levels without having to enter inside the cargo tank.

Features


• High audible alarm with visual flashing bright LEDs


• Shatterproof casing to withstand the toughest marine environments

• MED approved

Benefits

• The audible & visual alarm and confidence blip allows you to concentrate on the job at hand


button

• The rugged construction ensures durability of your unit to continuously safeguard you in a marine environment



708867 / 708859 Unitor Tank-mate Gas detector package for O2+C4H10+Ir+H2S

709402 Unitor Tank-mate Gas detector package for O2+C5H12+CO

709386 Unitor Tank-mate Gas detector package for O2+C5H12+H2S

709360 Unitor Tank-mate Gas detector package for O2+C5H12

657882 / 657833 Unitor Tank-mate Gas detector package for O2+C4H10+Ir

709337 / 709329 Unitor Tank-mate Gas detector package for O2+CH4+Ir+H2S

656769 Unitor Tank-mate Gas detector package for O2+CH4+Ir

657841 Unitor Tank-mate Gas detector package for O2+C4H10+Ir+CO

709345 Unitor Tank-mate Gas detector package for O2+CH4+Ir+CO

New Unitor Tank-mate Gas detector package for O2+H2

New Unitor Tank-mate Gas detector package for O2+H2+PH3+AsH3

New Unitor Tank-mate Gas detector package for O2+CO2+Ir

New Unitor Tank-mate Gas detector package for O2+C2H2+Ir+NH3

Accessories


656900 Carry case and belt for Tank-mate gas detector





656843 Aspirator probe telescopic 1m

656850 Water trap for sampling hose

758



AASSPPIRIRAATTOOR HOR HOSSE 10 M FE 10 M FOOR UR USSE WE WITITH UH UNITNITOOR GR GAASSDDEETTEECCTTOORRSS

381 656819

This is a 10 metre aspirator hose that you can use with the Unitor aspirator assembly for Unitor gas

detectors.

Features

• Flexible rubber hose

Benefits

• Can be used with any Unitor Oxy, Toxi or Gas-Mate detectors

AASSPPIRIRAATTOOR HOR HOSSE 20 M FE 20 M FOOR UR USSE WE WITITH UH UNITNITOORRGGAAS DS DEETTEECCTTOORRSS

381 656827

This is a 20 metre aspirator hose that you can use with the Unitor aspirator assembly for Unitor gas

detectors.

Features


Benefits

• Can be used with any Unitor Combi-Mate gas detectors

759



AASSPPIRIRAATTOOR PR PRROOBBE 1 M FE 1 M FIXIXEED FD FOOR GR GAAS DS DEETTEECCTTIOIONN

381 656835

This fixed 1 metre aspirator probe can be used

with our Unitor gas detectors when you are

needing to sample inside an area with limited or

restricted access.

Features

• Stainless steel construction

Benefits

• Can be used with any Unitor aspirator

• Allows for safe remote sampling

AASSPPIRIRAATTOOR PR PRROOBBEE, T, TEELLEESSCCOOPPIC - 1 MIC - 1 M

381 656843

This telescopic aspirator probe can be used

with our Unitor gas detectors when you are

needing to sample inside an area with limited or

restricted access.

Features

• Stainless steel construction

• Telescopic adjustment

Benefits

• Can be used with any Unitor aspirator


760



AASSPPIRIRAATTOOR AR ASSSSEEMBMBLLY SY SINGINGLLE GE GAAS MOS MONITNITOORR

381 725127

Hand pumped aspirator assembly for use with personal single gas monitors Oxy-Mate Toxi-Mate and

Gas-Mate detectors when needing to carry out remote sampling without entering the testing area.

Features

• Manual ball pump

• Rubber construction

Benefits

• Designed for use with Unitor single gas detectors

• Allows for remote safe sampling

AASSPPIRIRAATTOOR AR ASSSSEEMBMBLLY NOY NON-PN-PUUMPMPEED UD UNITNITOORRCCOOMBMBI-MAI-MATTE GE GAAS DS DEETTEECCTTOORR

381 656801

The hand pumped aspirator assembly can be used with the Unitor Combi-Mate personal gas detector

when needing to carry out remote sampling without entering the testing area.

Features


• Rubber 2 metre hose

Benefits

• Designed for use with Unitor Combi-Mate gas detectors


761



AASSPPIRIRAATTOOR AR ASSSSEEMBMBLLY FY FOOR UR UNITNITOOR CR COOMBMBI-MAI-MATTE 3E 3GGAAS DS DEETTEECCTTOORR

381 739077

The hand pumped aspirator assembly can be

used with the Unitor Combi-Mate 3 personal

gas detector when needing to carry out remote

sampling without entering the testing area.

Features


• Rubber 2 metre hose

Benefits

• Designed for use with Unitor Combi-Mate gas

detectors


WWAATTEERRTTRRAAP FP FOOR UR USSE WE WITITH GH GAAS DS DEETTEECCTTIOIONNAASSPPIRIRAATTOOR TR TUUBBEE

381 656850

A water trap to be installed between aspirator

and your gas detector to ensure that you do not

accidentally draw liquid in to the unit when

sampling with the aspirator assembly.

Features

• Rigid clear plastic construction

• Replaceable filter

• Water line sight glass

Benefits

• Made from strong plastic that will not easily break

• Clear plastic enables you to see any liquid in the line

• Water line sight glass prevents too much liquid build up

• Replacement filters increase the lifespan of the product

762

GGAASS-T-TEESST KT KITIT, F, FOOR UR UNITNITOOR CR COOMBMBI-MAI-MATTE PE PUUMPMPEEDDUUNIT WNIT WITITHOHOUUT GT GAAS CS CYYLLINDINDEERR

381 709436

This gas test kit can be used with any Unitor

SpanGas cylinder to carry out daily bump test

for Unitor Combi-Mate Gas Detectors. The

simple trigger operation ensures that the correct

amount of calibration gas is used every time.

Features

• Connection place for connection leak tight

connection to Combi-Mate


• Trigger operation

• Pressure gauge

Benefits

• Moulded connection plate ensures a leak tight seal

• Flexible rubber hose ensures no leakage of calibration gas

• Single trigger operation ensures that there is no wastage of calibration gas

• Pressure gauge ensures that the correct pressure of calibration gas is used every time

• Test kit is interchangeable with all Unitor span gas cylinder available globally

GGAAS TS TEESST KT KIT FIT FOOR CR COOMBMBI-MAI-MATTE 3E 3

381 725134

A gas test kit to be used with any Unitor

SpanGas cylinder to carry out pre test or daily

bump testing to verify your Unitor Combi-Mate

3 Gas detector is working correctly. The simple

trigger operation ensures that the correct

amount of calibration gas is used every time.

Features

• Connection place for connection leak tight

connection to Combi-Mate


• Trigger operation

• Pressure gauge

Benefits

• Moulded connection plate ensures a leak tight seal

• Flexible rubber hose ensures no leakage of calibration gas

• Single trigger operation ensures that there is no wastage of calibration gas

• Pressure gauge ensures that the correct pressure of calibration gas is used every time

• Test kit is interchangeable with all Unitor span gas cylinder available globally

763



CCAARRRRY CY CAASSE FE FOOR OR OXXYY, T, TOOXXI & GI & GAASS-MA-MATTE SE SINGINGLLEEGGAAS PS POORRTTAABBLLE GE GAAS DS DEETTEECCTTOORR

381 725143

This is a specially designed carry case which

allows you to connect it to our specially

designed chest harness, shoulder strap, belt or

hard hat harness or simply be used as a

protector for your gas detector.

Features

• Made from durable leather

• Specially designed to fit Unitor single gas detectors

• Plastic viewing window

Benefits

• Protects the unit from wear and tear

• Fits perfectly around Unitor single gas detectors

• Prolongs the life of you gas detector

CCAARRRRY CY CAASSE FE FOOR UR UNITNITOOR CR COOMBMBI-MAI-MATTE PE POORRTTAABBLLEEGGAAS DS DEETTEECCTTOORR

381 656918

This is a specially designed carry case which

allows you to connect it to our specially

designed chest harness, shoulder strap, belt or

simply be used as a protector for your Combi-Mate Gas detector.

Features


• Specially designed to fit Unitor Combi-Mate gas detectors


Benefits


• Fits perfectly around Unitor Combi-Mate gas detectors

• Connects with Unitor carry strap or chest harness


764



CCHEHESST HAT HARRNENESSS KS KIT FIT FOOR UR UNITNITOOR CR COOMBMBI-MAI-MATTEEGGAAS DS DEETTEECCTTOORR

381 656892

This chest harness kit enables you to attach

your Unitor Combi-Mate and were the unit on

your chest allowing you to have both hands free

to concentrate on the task in hand.

Features

• Made from durable nylon

• Toughened plastic clips

• Adjustable straps

Benefits

• Durable nylon ensures that the harness will not break

under strain

• Tough plastic clips ensure that the unit is secured in position

• Adjustable straps ensure a comfortable fit for the user

CCAARRRRY CY CAASSE FE FOOR UR UNITNITOOR CR COOMBMBI-MAI-MATTE 3E 3PPOORRTTAABBLLE GE GAAS DS DEETTEECCTTOORR

381 739101

A specially designed carry case which allows you to connect it to our specially designed chest harness,

shoulder strap, belt or simply be used as a protector for your Combi-Mate 3 gas detector.

Features


• Specially designed to fit Unitor Combi-Mate gas detectors


Benefits


• Fits perfectly around Unitor Combi-Mate gas detectors



765

CCAARRRRY CY CAASSE AE AND BND BEELLT FT FOOR UR UNITNITOOR TR TAANKNK-MA-MATTEEGGAAS DS DEETTEECCTTOORR

381 656900

A specially designed carry case and belt which

allows you to wear your Unitor Tank-Mate

around your waist and protect your instrument.

Features


• Specially designed to fit Unitor Combi-Mate gas

detectors


Benefits


• Fits perfectly around Unitor Combi-Mate gas

detectors



766

FFAALLL AL ARRRREESST DT DEEVVICICEESS

Our range of fall arrest products cover both

height and confined space entry in hazardous

conditions and are presented to cover most

requirements onboard today's vessels. We can

also meet your requirements for tailored

solutions or for more specialised hazardous

duties. All our products are approved to EN

standard ensuring quality and a confidence you

can rely on.

Features

• Range of harnesses in either basic or specialist ATEX

versions

• Confined space entry and rescue systems

• Work positioning solutions

• Fall arrest devices

Benefits

• Our range will cover the majority of standard requirements for onboard your vessels

• Quality products to give you compliance and meet health & safety requirements

• Solutions for more hazardous or specialist applications can be quoted

• Advice and support from our global network of sales offices


Product No Description

777611 Harness kit complete with lanyard

777603 Full body harness with rear attachment

777615 Full body harness front and rear attachment ATEX approved

777612 Fall Arrest 2 metre elasticated lanyard energy absorbing lanyard with scaffold hook

777613 Fall Arrest 1.8 metre elasticated energy absorbing lanyard 2 standard hooks

777604 Work positioning belt

777606 Fall Arrest Aluminium Tripod

777605 Fall Arrest Winch with 15 metre cable for Tripod

777607 Fall Arrest Bracket for winch

777608 Fall Arrest Bag for Tripod and winch

767

�� -1�� !" "# 8 �� % �) %��& �'��-1&��$�(��)�'*

�� -1�� !" "# 8 �� % �) %��& �'��-1&��$�(��)�'�

SAFETY


LIFE SAVINGMEDICAL

ENVIRONMENTAL

LIFE SAVING

The only rule in maritime regulations is constant change which is why we manage tomorrow’s challenges today to keep you safely ahead.

Safety is a constant vigil to ensure seafarers’ lives are protected, safe and in the event of an incident rescued.

Our range of lifesaving appliances is built on quality of product, unrivalled global service support and product performance.

This gives our customers the confidence of having a consistent quality supplier of safety equipment at all times no matter where they are in the world.

Cost of ownership is all-important so all the products we offer are supported by our global network of service stations to support your choice of WSS as a partner to manage, monitor and maintain your safety equipment.

SSAAFFEETTYY Cabinets

Cabinets

CCAABBINEINETTSS

We offer a wide range of standard cabinets to

store various types of lifesaving and fire fighting

equipment. GRP, ABS or PE materials are used.

Well proven through many years of supply in

numerous markets (offshore, cruise & general

marine), our cabinets offer flexible options giving

you a choice dependent on your stowage need.

Features

• GRP, ABS or PE materials

• Stainless steel, plastic or polythene hinges and fittings dependant on type of cabinet and area of storage

• All are waterproof, hard wearing and colour fast

• Clear labelling defines usage

Benefits

• Materials and design features best suited to your storage area

• Options include floor or wall mounted enabling you to maximise your storage space

• For total protection of your equipment some cabinets offer you internal fittings as standard



Fire fighting Storage Cabinets

234773 Ship to Shore fittings cabinet

234799 18 metre fire hose and fittings cabinet



723064 Fire extinguisher 6kg to 9kg cabinet

766827 Fire extinguisher 6kg - 9kg and 5kg Co2 cabinet

546689 Helideck emergency equipment cabinet

592576 Fire man's outfit cabinet

737320 Foam emergency station cabinet

Lifesaving Appliance Cabinets

576603 lifejacket or Immersion suit box small

576611 Lifejacket or immersion suit box medium

576629 Lifejacket or immersion suit box large

576637 Lifejacket or immersion suit box XL

546564 Safety plan container

638395 Emergency Equipment Breathing Device cabinet

Special sizes, colours, approvals can be quoted on request

770

HYHYDDRROOSSTTAATTIC RIC REELLEEAASSE UE UNIT HANIT HAMMAMMAR H20 FR H20 FOORRLLIFIFEERRAAFFTTS 2 YS 2 YEEAARR

805 750751

The Hammar H20 is a hydrostatic release unit

for all types of liferaft. Made of glass fibre and

reinforced nylon, it enables your liferafts to

surface and inflate in an emergency situation.

Hammar H20 hydrostatic release units are

approved globally and fulfil the requirements of

the SOLAS 74/96 Convention, Reg. III/4 LSA

Code, IMO Res.MSC. 48/(66), IMO Res. MSC.

81(70), approved to EU Directive 96/98 EC on

Marine Equipment.

Features

• 2 year lifespan

• Operates from 1.5 - 4 metres

• Fits any installation

• Vacuum and electric release systems available

Benefits

• You do not have to service these units

• When the 2 years is expired you dispose of them

• Comes complete with easy to understand

instructions so your crew can install them

• Global service, local support

Approvals

MED approved

771

HYHYDDRROOSSTTAATTIC RIC REELLEEAASSE UE UNIT DNIT DKK2004 F2004 FOORRLLIFIFEERRAAFFTTS 4 YS 4 YEEAARR

805 777869

The DK2010 4 year disposable hydrostatic release unit offers you excellent value through an extended

lifespan.

It is easy to install and approved by the worlds leading maritime authorities and of particular use when

you use 30 month service liferafts.

Manufactured from high grade materials to withstand the rigours of the marine environment the

DK2010 offers you exceptional value.

Features

• 4 year lifespan

• Operates from 1.5 - 4 metres

• Fits any installation

• Electric release systems available

Benefits

• You do not have to service these units

• When the 4 years is expired you dispose of them

• Comes complete with easy to understand instructions so your crew can install them

• Global service Local support

Approvals

MED approved

772

SSAAFFEETTYY Life Saving Appliances

Immersion Suits

IMMEIMMERRSSIOION SN SUUITITSS

Unitor’s immersion suits are approved by many

of the world’s leading maritime authorities and

offer you exceptional properties for surviving

cold water immersion even in Arctic conditions.

You can choose from 5 mm or 7 mm insulation

or additionally a foam filled pillow for increased

buoyancy. They are fast to don with the large

zip handle for easy closure and include pre-

attached hood and gloves so you are prepared

when you enter the water.

Features

• Sizes to cover heights from 135 - 210 cm

• Glued, stitched and heat taped seams

• Colour coded stowage bags

• MED approved

Benefits

• You can choose from a standard non-pillow version and use your existing life jackets or a pillow version for quicker

for donning times

• High manufacturing standards provide you with secure in water thermal properties and a long life product

• To support your maintenance programmes we provide an onboard test kit with all the parts required to test and

repair your suits



740464 V20 Height 130-150cm 5mm insulation with light

728592 V20 Height 160-185cm 5mm insulation with pillow






728600 V20 OP Height 160-185cm 5mm insulation non pillow type



Ancillaries

758201 Immersion suit Test Kit

777423 W3 light for V20 & V40 suits

576603 Cabinet for 6 lifejacket or 4 Imm suits

576611 Cabinet for 18 lifejackets or 8-10 Immersion suits

576629 Cabinet for 24 lifejackets or 12 Immersion suits

576637 Cabinet for 32 lifejackets or 16 Immersion suits

773


Immersion Suits

RREESSCCUUE SE SUUITIT

820 763359

The GT100 is a 1-hour Thermal Protective Aid (SOLAS 34 TPA) which you can use for rescue

operations or as a constant wear suit. You can quickly don the suit using the watertight main zipper

single-handedly.

The attached hood gives you additional thermal retention and the high length safety boots include steel

toe caps for your added protection.

Features

• 3 layer tear proof breathable nylon fabric

• Integral suspenders

• Generous sizing

• Approved to MED B-1140 as a 1 hour Thermal Protective aid

Benefits

• The new orange 3 layer material is breathable preventing the build-up of moisture in the suit making it extremely

comfortable for you to wear during long periods

• We include adjustable suspenders on the inside of the suit so you enjoy a better fit reducing chaffing during high

physical activity

• The generous sizing and adjustable suspenders give you freedom of movement

• The MED approval as a one hour suit is testament to the suit's ability for use during rescue operations or working in

cold environments


Product number Description Height Boot size

763359 GT100 Rescue suit size small, 166-174cm 42

763367 GT100 Rescue suit size medium 170-178cm 43

763375 GT 00 Rescue suit size large 174-174cm 44

763383 GT100 Rescue suit size Extra large 182-188cm 45

774


Life Jackets and Lights

LLIFIFEEJJAACCKKEET AT ANCNCILILLLAARRIEIESS

Our comprehensive range of life jackets and

ancillaries gives you numerous options to

comply with regulations or meet your own

specifications.

We can also tailor solutions to meet offshore

criteria or your specific needs through any of

our sales offices.

Features

• ISO and SOLAS compliant life jackets and ancillaries

• Full spares and ancillary options

• Tailored solutions

Benefits

• Our list of spares and accessories covers from life jacket repacking to meeting hazardous environments with our new

range of personal safety lights

• We work closely with our suppliers to tailor solutions to meet your individual requirements

• Our life jacket range is supported throughout our service network globally so you can always be assured of efficient

service and spare parts supply



777804 L6A-EX ATEX life jacket light

777423 W3 auto life jacket light

552190 IMO sign Inflatable lifejacket

632737 Recharge kit for Offshore 150n Solas Twin chamber lifejacket

632752 Recharge kit for Interlock 275n Solas Twin chamber life jacket

632745 Recharge kit for Worksafe ISO 150n Single chamber lifejacket

754838 Halkey roberts Super bobbin for auto lifejackets

775



INFINFLLAATTAABBLLE LE LIFIFEEJJAACCKKEETTSS

Our comprehensive range of life jackets and

ancillaries gives you numerous options to

comply with regulations or meet your own

specifications.

We can also tailor solutions to meet offshore

criteria or your specific needs through any of

our sales offices.

Features

• ISO and SOLAS compliant life jackets

• Full spares and ancillary options

• Tailored solutions

• Global service, local support

• MED approved

Benefits

• We give you a wide choice of working single

chamber life jackets or twin chamber SOLAS life jackets

• Our list of spares and accessories covers from life jacket repacking to meeting hazardous environments with our new

range of personal safety lights

• We work closely with our suppliers to tailor solutions to meet your individual requirements

• Our life jacket range is supported throughout our service network globally so you can always be assured of efficient

service



769687 Challenger Interlock Solas Inflatable 275N

769679 Challenger Flexi wing Solas inflatable 150N

623703 Challenger Worksafe Inflatable ISO 150n

777804 L6A-EX ATEX life jacket light

777423 W3 auto life jacket light

552190 IMO sign Inflatable lifejacket

632737 Recharge kit for Offshore 150n Solas Twin chamber lifejacket

632752 Recharge kit for Interlock 275n Solas Twin chamber life jacket

632745 Recharge kit for Worksafe ISO 150n Single chamber lifejacket

776



UUNITNITOOR SR SEEAAGGUUAARRD LD LIFIFEEJJAACCKKEETTSS

The Unitor Seaguard 2010 foam lifejacket uses

a single block design for increased in-water

performance by reducing waves being directed

towards the mouth.

Features

• Approved to MSC81(70) July 2010

• 150n adult buoyancy rating

• Infant to adult chest sized up to 75 cm as standard

• Compact size

• MED approved

Benefits

• Our approval gives you the ability to meet the

additional life jackets required under later regulations

• The 150n minimum buoyancy and unitary block design gives you far superior in-water performance

• Our 75 cm chest size as standard means you not having to carry additional extension belts or specially sized life

jackets on board

• Even with 150n buoyancy it remains a compact size when folded and will fit into many of your existing lockers



764548 Seaguard 2010 Adult without light

764555 Seaguard 2010 Child without light

764837 Seaguard 2010 Infant without light

764977 Seaguard 2010 Adult with light

764978 Seaguard 2010 Child with light

764979 Seaguard 2010 Infant with light

777423 W3 Auto MED/USCG Lifejacket light

777804 L16AX ATEX MED/USCG Lifejacket light

552190 IMO Sign Adult lifejacket

552208 IMO Sign Childs lifejacket

Storage Cabinets

576603 6 life jackets storage cabinet




777


Lifebuoys, bracket, lines and light

LLIFIFEEBBUUOOYY'S A'S AND AND ANCNCILILLLAARRIEIESS

Designed for commercial applications, our high

quality lifebuoys feature a bright orange

polyethylene outer shell with a high density

foam fill, unaffected by extreme weather or

prolonged outdoor exposure. Our lifebuoys are

now plugged for your added protection against

the elements, and offer practical solutions for

your safety requirements.

Features

• Storage cradles and brackets

• Buoyant lines from 30 to 50 metre length

• MED approved

Benefits

• We offer two sizes of approved lifebuoy so you can standardise on one make on board

• We offer a range of storage options to suit your vessels requirements

• Whether you require ATEX approved for tanker use or standard lifebuoy lights we offer a full range


Product number Description Use

637991 30" 2.5kg lifebuoy General

638007 30" 4kg lifebuoy For fitting to an MOB smoke and light

Accessories


777805 LIFEBUOY LIGHT L160 MED

777803 LIFEBUOY LIGHT L162 USCG

768408 LIFEBUOY LIGHT L161 ATEX/IECEx

777802 LIFEBUOY LIGHT L163 ATEX/IECEX/USCG

777801 LIFEBUOY LIGHT L16 X ADPTER PLATE

576702 LIFEBUOY LIGHT L90 WITH BATTERY

735985 Y BRACKET FOR LIFEBUOY

606210 FLOATING LIFELINE 50MTR



606206 RETROREFLECTIVE SOLAS TAPE (MED)

552240 IMO SIGN F/LIFEBUOY

552273 IMO SIGN F/LIFEBUOY W/



778


Lifebuoys, bracket, lines and light

LLIFIFEEBBUUOOY LY LIGIGHTHTSS

Our range of lifebuoys and ancillaries give you

practical solutions to comply or extend your

safety requirements. We now have you a full

range of lifebuoy lights covering standard as

well as USCG and ATEx versions for use on

tankers, in offshore industry and hazardous

areas.

Features

• Easy to install

• MED approved and USCG versions

• ATEx version

• 5 year life on most versions

Benefits

• All our lifebuoy lights have back plates as standard

so are simple to install

• Whether you need to meet USCG or MED we offer

both types in standard and ATEx versions

• Most of our range have a 5 year life so it is fit and

forget- no need to annually change batteries and

they provide a cost effective solution

Remember to order your mounting plate to ensure easy

fixing when replacing your L41B or L120 Product number

777801


Product number Description Use

637991 30" 2.5kg lifebuoy General

638007 30" 4kg lifebuoy For fitting to an MOB smoke and light

779

Accessories


777805 LIFEBUOY LIGHT L160 MED

777803 LIFEBUOY LIGHT L162 USCG

768408 LIFEBUOY LIGHT L161 ATEX/IECEx

777802 LIFEBUOY LIGHT L163 ATEX/IECEX/USCG

777801 LIFEBUOY LIGHT L16 X ADPTER PLATE

576702 LIFEBUOY LIGHT L90 WITH BATTERY

735985 Y BRACKET FOR LIFEBUOY




606206 RETROREFLECTIVE SOLAS TAPE (MED)

552240 IMO SIGN F/LIFEBUOY




Pyrotechnics

781595 LIGHT-SMOKE SIGNAL (MAN OVER BOARD)

780


Lifeboat Air Cylinders

LLIFIFEEBBOOAAT CT CYYLLINDINDEERRSS

As part of our cylinder range we supply a

standard lifeboat air cylinder complete with the

air regulator.

You also have the option to fill the cylinder using

our Bauer range of compressors with the range

of hoses we offer.

Features

• 50 litre / 200 bar

• Standard fitting for many type of lifeboats

• Bauer compressors

Benefits

• Our cylinders will fit most of your standard type

installations

• As well as your BA set cylinders you can also refill

your lifeboat cylinders with our range of Bauer

compressors

Working pressure according to BS5045 / DOT3AA Note: To have a complete filling hose from a Bauer

compressor to the cylinder with 5/8'' female thread you

need the filling hose, adapter, connection stub and air nut.



653386 Air cylinder 50 litre - 200 bar with hand wheel operated valve,filled

619221 Regulator air 0-10 bar adjustale, capacity 40M3/H

233494 Connection stub OX/N2/Air

305565 Nut air 5/8' male

Accessories:

Filling hose 10 metre - female connection on both ends



Ask your local WSS Sales office for more information

781


Liferafts

LLIFIFEERRAAFFT RT REENTNTAALL

Customer demands dictated our introduction of

the innovative Life raft Rental Exchange (LRE)

Concept and since 2007 we have re-shaped

the Life raft industry and caused traditional

processes to be out dated.

Manage-Monitor or Maintain are key functions

at the heart of our offers regardless of your

preference for the problem-free LRE solution or

the traditional ownership method.

Features

• Global life raft supply, rental or service solutions

• Full range of sizes and types available

• New 2012 MSC81(70) life rafts for supply or rental

• Global service and local support

Benefits

• We are able to tailor solutions to meet your needs

• Our range of life rafts is extensive with stocks in over

40 locations globally

• Our vast turnover allows you to benefit from the

latest approved life rafts being supplied

• Regardless of the solution chosen you will always

benefit from an appointed local contact person and

global service support

MSC81(70)

All liferafts meet the requirement of 82.5 kg per person. All

new vessels delivered after 1st January 2012 must have

MSC81(70) liferafts fitted

Class Requirements

All existing vessels who have a liferaft condemned must

replace with a MSC81(70) liferaft.

Markets:

• Merchant marine

• Offshore

• Cruise

• Ferry

• Fishing

• New buildings

• Retro fits

• Military

782



Throwoverboard

759092 6 Person Rental liferaft with A Type emergency pack

759118 10Person Rental liferaft with A Type emergency pack





Davit Launchable

759167 12 Person Davit launch Rental liferaft with A Type emergency pack




Accessories

Product number Single and double ramp cradles available on request

750751 Hydrostatic release unit 2 year life

777869 Hydrostatic release unit 4 year life

552315 IMO Liferaft Sign

552844 IMO Sign Lower liferaft

552356 IMO Sign Davit launch liferaft

Approvals

MED approved

783


Liferafts

TTHRHROOWWOOVVEERRBBOOAARRD LD LIFIFEERRAAFFTTSS

The new 2012 Unitor liferaft range now uses the

latest technology and materials to increase

durability in the marine environment, reducing

your ownership costs and are approved to

MSC81(70).

Our global service network is Z17 approved by

the worlds leading Class Societies as well as

local flag administrations giving you unrivalled

after sales service quality.

For other specifications please contact your local WSS sales office.

Features


• New 2012 MSC81(70) life rafts


Benefits


• Our range of life rafts is extensive with stocks in over 40 locations globally

• Our vast turnover allows you to benefit from the latest approved life rafts being supplied

• You will benefit from an appointed local contact person and global service support

Technical data

Up to 40 metre stowage heights as standard

MSC81(70)

All liferafts meet the requirement of 82.5kg per person. All


MSC81(70) liferafts fitted

Class Requirements



Markets:

• Merchant marine

• Offshore

• Cruise

• Ferry

• Fishing

• New buildings

• Retro fits

• Military

784



758024 6 Person Throwoverboard Solas A Type emergency pack







Range

Throwoverboard from 6 to 50 persons

Davit Launch from 12 to 37 persons

Standard or Self Righting versions available

Up to 40 metre freeboard heights

MED Ships Wheel approved

For other approvals please contact your local WSS sales office

Accessories


750751 Hydrostatic Release Unit 2 year life


552315 IMO Liferaft sign 15 x 15cm

Approvals

MED approved

785


Liferafts

DDAAVVIT LIT LAAUUNCNCH LH LIFIFEERRAAFFTTSS

Our complete range of Unitor Davit Launch

liferafts boasts one of the highest freeboard

stowage heights available as standard at 40

metres.

You can choose from 12 to 37 person both

standard or self-righting for use on any type of

vessel.

Features

• Up to 40 metre stowage height as standard


• New 2012 MSC81(70) life rafts


Benefits


• Our range of life rafts is extensive with stocks in over 40 locations globally

• Our vast turnover allows you to benefit from the latest approved life rafts being supplied

• You will benefit from an appointed local contact person and global service support

MSC81(70)

All liferafts meet the requirement of 82.5 kg per person. All


MSC81(70) liferafts fitted.

Class Requirements



Markets:

• Merchant marine

• Offshore

• Cruise

• Ferry

• Fishing

• New buildings

• Retro fits

• Military









786


Range

Throwoverboard from 6 to 50 persons

Davit Launch from 12 to 37 persons

Standard or Self Righting versions available

Up to 40 metre freeboard heights

MED Ships Wheel approved

For other approvals please contact your local WSS sales office

Accessories




552356 IMO sign Davit Launch Liferaft

552844 IMO sign Lower liferaft

Approvals

MED approved

787


Pyrotechnics

PPYYRROOTTEECCHNICHNICSS

Our global distribution network supplies a range

of quality approved brands to suit your

requirements

Specific brands and delivery time must be

checked with your preferred port as we may

have to comply with local transport rules and

regulations.

Features

• Approved products

• Local sales office support

• Compliance to local transport regulations

Benefits

• WSS global network supply will ensure you only

recieve quality approved pyrotechnics

• We can dispose of your old pyrotechnics (can vary in

some ports according to local regulations)

• We can supply approved alternatives to ensure you comply due to availability or local transport regulations


Product number Description Use in liferafts In lifeboats In bridge set

750754 Red Handflare 6 per liferaft 6 per lifeboat

750758 Red Parachute Rocket 4 per liferaft 4 per lifeboat 12 per vessel

750760 Orange buoyant smoke signal 2 per liferaft 2 per lifeboat

781595 Man overboard Light and smoke signal 2 per vessel

1 on each bridge wing

790390 Linethrower 1 set of 4 units

638007 4.3kg Lifebuoy for use with Man overboard light and smoke

Note: These are general guidelines and may vary according

to differing class or national flag requirements.

788

RREESSCCUUE EE EQQUUIPIPMEMENTNT

Whether you require a complete helideck

equipment set or individual rescue tools and

equipment, we offer a range that ensures the

rigours of rescue are carried out efficiently and

effectively. We can also tailor your requirements

to meet varying regulations and offer you a

range of cabinets to store them in.

Features

• Quality materials and production

Benefits

• We only source the best quality rescue tools to give you the best for the job

• Where required all tools and equipment are approved by the appropriate authorities



716951 Helideck equipment basic set

Tools and Safety

777603 Full body harness

777612 Fall Arrest Elasticated lanyard for Fall arrest harness

777611 Basic Kit Full Body Harness & Lanyard

176826 Fire fighters 30 mt lifeline with hook

546648 Hacksaw

546655 Spare hacksaw blades

546663 Telescopic pole 2mt with hook

546671 Knife for quick release with sheath

546747 Pliers side cutting

606206 Retro reflective tape

527515 Crowbar

Fire Axes

525535 Fire Axe 17" shaft



534958 Fire Axe with insulated handle 2kv

525519 Cover for fire axe

534966 Bracket for insulated fire axe

Torches and Lamps

782406 Safety Torch ATEX right angled

658310 Safety torch ATEX

736611 Marshalling baton

658328 Wolflite Safety Lamp H-251a Battery

638726 Wolflite Safety Lamp H-251a

588301 Wolflite Safety Lamp H-251a Charger

638973 Wolflite Safety Lamp H-251a Bulb

789


Stretchers

NENEIL RIL ROOBBEERRTTSSOON SN STTRREETTCCHEHERR

825 184390

The Neil Robertson stretcher is designed to

allow you to remove injured persons from

spaces with limited access.

Light-weight and compact compared to other

stretchers giving you more freedom of

movement and flexibility of use.

Our Neil Robertson stretcher is ideal for use in

engine-rooms, cargo holds and boiler rooms

where access or hatch sizes are limited.

Features

• Flexible semi-rigid canvas design

• Light-weight

• Vertical recovery

• High quality materials for longer product lifespan

Benefits

• You can neatly fold it to store away

• No specialist training is required to use

• The strapping holds the casualty firmly even when you need to recover vertically

• A regular equipment check is all you need to perform to ensure it is ready for use at all time

Technical data

Length 150cm

Width 100 cm

Weight 10 kg

Lifting capacity 120 kg

790


Stretchers

PPAARRAAMEMEDDIC SIC STTRREETTCCHEHER AR AND RND REESSCCUUE UE UNITNIT

825 537357

The Paramedic Rescue Pac secures your

patient even in the most difficult rescue

situations.

The PRP is manufactured from strong PVC

coated fabrics with a fibreglass reinforced

bottom giving you a tough no nonsense

stretcher.

Features

• Includes straps to secure arms and legs

• Sectioned headguard with adjustable bands

Benefits

• Side rods allow you to horizontally lift

• You can X-ray patients without removing them from

the stretcher

• It is ideal for lifting patients clear of hazardous area

• Light-weight and compact ensures it is not a struggle

when moving to an incident

Technical data

Material Double coated PVC

Bottom plate Polyester reinforced with fibre glass

Rods Aluminium

Straps Polyester

Max load 140 kg

CE-marked according to the European directive for Medical

Device 93/42/EEC and registered by the Swedish Medical

Products Agency

791

SSAAFFEETTYY IMO Signs

IMO Embarkation station/Lifeboat signs

IMO LIMO LIFIFEEBBOOAAT ST SIGIGNSNS

Our range of lifeboat signs give you instructions

both inside and outside the lifeboat and lifeboat

station guidance signs which be extended using

letters and numbers.

Our IMO life saving appliance signs are

recognised by most leading maritime authorities

and are approved to SOLAS.

You can choose from self-adhesive vinyl or rigid

PVC in a range of sizes, and in some cases,

orientations.

Features

• Approved by SOLAS

• High quality photoluminescance

• Long lasting for all marine environments

Benefits

• Our approvals are global and satisfy the requirements of the majority of maritime authorities

• The high quality photoluminescant materials offer superior performance and can easily be seen under emergency

lighting conditions

• This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other

photoluminescant materials

• Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a

longer lasting product


Product number Description Fitting Material Size

552331 Lifeboat sign Wall mounted Self adhesive vinyl 15 x 15cm

751031 Lifeboat station guidance sign Down Wall mounted Self adhesive vinyl 15 x 30cm

751025 Lifeboat station guidance sign Down right Wall mounted Self adhesive vinyl 15 x 30cm

751028 Lifeboat station guidance sign Down left Wall mounted Self adhesive vinyl 15 x 30cm

751034 Lifeboat station guidance sign Up Wall mounted Self adhesive vinyl 15 x 30cm

552406 Lifeboat fasten seat belt sign Wall mounted Self adhesive vinyl 15 x 30cm

552414 Lifeboat secure hatches sign Wall mounted Self adhesive vinyl 15 x 30cm

552448 Lower Lifeboat instruction sign Wall mounted Self adhesive vinyl 15 x 30cm

552422 Lifeboat release falls sign Wall mounted Self adhesive vinyl 15 x 30cm

552471 Lifeboat start air supply sign Wall mounted Self adhesive vinyl 15 x 30cm

552463 Lifeboat release gripes sign Wall mounted Self adhesive vinyl 15 x 30cm

792


IMO Escape Way guidance signs

EESSCCAAPPE WE WAAY AY AND GND GUUIDIDAANCNCE SE SIGIGNSNS

Escape way and guidance signs show you

where to go in an emergency.

Panoramic and wall mounted double sided

signs project from walls and corridors to ensure

conspicuity from either direction.

You can choose from self adhesive vinyl or rigid

PVC in a range of sizes and in some cases

orientations.

Features




Benefits



lighting conditions







751049 Escape way guidance sign Right Wall mounted Self adhesive vinyl 15 x 30cm

751043 Escape way guidance sign Left Wall mounted Self adhesive vinyl 15 x 30cm

751073 Escape way guidance sign down Right Wall mounted Self adhesive vinyl 15 x 30cm

751076 Escape way guidance sign Down Left Wall mounted Self adhesive vinyl 15 x 30cm

751055 Escape way guidance sign Up Wall mounted Self adhesive vinyl 15 x 30cm

751058 Escape way guidance sign Down Wall mounted Self adhesive vinyl 15 x 30cm

751061 Escape way guidance sign Up Right Wall mounted Self adhesive vinyl 15 x 30cm

751070 Escape way guidance sign Up Left Wall mounted Self adhesive vinyl 15 x 30cm

751067 Escape way guidance sign double sided Down Right Ceiling mounted Clear pvc ceiling mounting 15 x 30cm

751064 Escape way guidance sign double sided Up left Ceiling mounted Clear pvc ceiling mounting 15 x 30cm

751037 Escape way guidance sign double sided Left Ceiling mounted Clear pvc ceiling mounting 15 x 30cm

751052 Escape way guidance sign panoramic Wall or corner mounted Clear pvc 20 x 20cm

751046 Escape way guidance sign double sided Right Wall mounted double sided Clear pvc 15 x 30cm

751040 Escape way guidance sign double sided Left Wall mounted double sided Clear pvc 15 x 30cm

793


IMO Fire fighting Equipment & System signs

FFIRIRE EE EQQUUIPIPMEMENT SNT SIGIGNSNS

Our range of fire equipment and system signs

give you identification of hazards, stowage

points, directions and warnings.

You can choose from self adhesive vinyl or rigid

PVC in a range of sizes, orientations and fitting

options.

Panoramic and wall-mounted double sided

signs project from walls and corridors to ensure

conspicuity from either direction.

Features

• Variety of installation options




Benefits



lighting conditions plus you get incredible ageing and weathering performance resulting in increased levels of safety

and a longer lasting product



• You can choose from a selection of fitting options for maximising the visual effect



751100 Water mist exinguishing system hazardous area sign Wall mounted Self adhesive vinyl 20 x 20cm

782144 Novec 1230 extinguishing system hazardous area warning sign Wall mounted Self adhesive vinyl 20 x 20cm

751082 Novec 1230 manual control point sign sign Wall mounted Self adhesive vinyl 15 x 15cm

751097 Fire Telephone Point sign Wall or corner mounted Rigid PVC panoramic 20 x 20cm

751094 Fire telephone Point sign Wall mounted Self adhesive vinyl 15 x 15cm

751091 Fire alarm point sign Wall or corner mounted Rigid pvc panoramic 20 x 20cm

751088 Fire Hose point sign Wall or corner mounted Rigid pvc panoramic 20 x 20cm

751085 Water extinguisher point and instructions sign Wall mounted Self adhesive vinyl 8 x 20cm

751079 Deluge release manual control point sign Wall mounted Self adhesive vinyl 15 x 15cm

794


IMO First Aid & Safety Equipment signs

FFIRIRSST AT AID AID AND MEND MEDDICICAAL EL EQQUUIPIPMEMENT SNT SIGIGNSNS

We offer a full range of IMO safety signs,

instruction notices and warning signs.

First aid and safety equipment signs depict

either where you medical assistance is situated,

what type is available or necessary safety

equipment that maybe required in an

emergency situation.

You can choose from self-adhesive vinyl or rigid PVC in a range of sizes and in some cases

orientations.

Features

• Wall mounted or panoramic showing medical emergency assistance





Benefits



lighting conditions





IMO SOLAS Signs are designed to satisfy Chapter III,

Regulation 9.2.2 and Regulation 9.2.3 of the SOLAS

Convention. Signs are required to be easily seen under

emergency lighting conditions and used in accordance with

the recommendations of the IMO.



751118 Breathing apparataus for medical use sign Wall mounted Self adhesive vinyl 15 x 15cm

751109 Hand washing sign Wall mounted Self adhesive vinyl 15 x 15cm

751115 Medical emergency call point sign Wall mounted Self adhesive vinyl 15 x 15cm

751103 General Alarm call point sign Wall mounted Self adhesive vinyl 15 x 15cm

751124 Doctor/Paramedic sign Wall mounted Self adhesive vinyl 15 x 15cm

751106 Emergency eye wash station sign Wall mounted Self adhesive vinyl 15 x 15cm

751112 Medical Emergency telephone sign Wall mounted Self adhesive vinyl 15 x 15cm

751121 Auto external defibrillator sign Wall mounted Self adhesive vinyl 15 x 15cm

795


IMO Hazard signs

IMO HAIMO HAZZAARRD SD SIGIGNSNS

The hazard warning signs are bright yellow so

you can easily see them and be alerted to a

hazard.



orientations.

Features




Benefits



lighting conditions







751148 Flammable risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751187 Oxidisation risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751157 Compressed gas risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751166 Slippery surface risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751172 Risk of falling sign Wall mounted Self adhesive viniyl 15 x 15cm

751169 Steep steps risk warning sign Wall mounted Self adhesive viniyl 15 x 15cm

751163 Trip hazard risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751151 Mind your head risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751178 Overhead loads risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751160 Over head working risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751181 Low temp risk sign Wall mounted Self adhesive viniyl 15 x 15cm

652412 Radioactive risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751133 Laser risk sign Wall mounted Self adhesive viniyl 15 x 15cm

652404 Corrosive risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751142 Toxic risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751136 Non-ionising radiation risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751145 Biological risk sign Wall mounted Self adhesive viniyl 15 x 15cm

796


751154 Noise risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751139 Fork lifts in use risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751127 Electrical risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751175 Heavy goods lorries risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751130 Machinery risk sign Wall mounted Self adhesive viniyl 15 x 15cm

751184 Magnetic field risk sign Wall mounted Self adhesive viniyl 15 x 15cm

652354 Engine room machinery space Wall mounted Self adhesive vinyl 15 x 15cm

652420 Flammable substance Wall mounted Self adhesive vinyl 15 x 15cm

652438 Explosion risk Wall mounted Self adhesive vinyl 15 x 15cm

782139 Explosion risk Wall mounted Self adhesive vinyl 15 x 15cm

782410 Low oxygen level Wall mounted Self adhesive vinyl 15 x 15cm

526566 Gas Danger Wall mounted Self adhesive vinyl 15 x 30cm

797


IMO LSA Signs

IMO LIMO LIFIFEESSAAVVING AING APPPPLLIAIANCNCE SE SIGIGNSNS



and are approved by SOLAS. They denote

positions of safety equipment and are ideal for

you to place on cabinets, lockers and storage

areas.

We offer a full range of IMO safety signs,

instruction notices and warning signs.



orientations.

Features




Benefits

• Our approvals are global and satisfy the requirements

of the majority of maritime authorities


lighting conditions







552331 Lifeboat sign Wall mounted Self adhesive vinyl 15 x 15cm

552315 Liferaft sign Wall mounted Self adhesive vinyl 15 x 15cm

552356 Davit launch liferaft sign Wall mounted Self adhesive vinyl 15 x 15cm

552190 Life jacket sign Wall mounted Self adhesive vinyl 15 x 15cm

552208 Child's life jacket sign Wall mounted Self adhesive vinyl 15 x 15cm

552240 Lifebuoy sign Wall mounted Self adhesive vinyl 15 x 15cm

552273 Lifebuoy with light and smoke sign Wall mounted Self adhesive vinyl 15 x 15cm

552257 Lifebuoy with line sign Wall mounted Self adhesive vinyl 15 x 15cm

798


552265 Lifebuoy with light sign Wall mounted Self adhesive vinyl 15 x 15cm

552323 Rescue boat sign Wall mounted Self adhesive vinyl 15 x 15cm

552372 Embarkation ladder sign Wall mounted Self adhesive vinyl 15 x 15cm

552349 Evacuation slide sign Wall mounted Self adhesive vinyl 15 x 15cm

751190 Evacuation chute sign Wall mounted Self adhesive vinyl 15 x 15cm

751193 Scramble net sign Wall mounted Self adhesive vinyl 15 x 15cm

552216 Survival craft portable radio sign Wall mounted Self adhesive vinyl 15 x 15cm

552224 EPIRB sign Wall mounted Self adhesive vinyl 15 x 15cm

552232 Radar transponder (SART) sign Wall mounted Self adhesive vinyl 15 x 15cm

552299 Survival craft distress signal storage sign Wall mounted Self adhesive vinyl 15 x 15cm

552380 Line throwing appliance sign Wall mounted Self adhesive vinyl 15 x 15cm

552281 Immersion suit sign Wall mounted Self adhesive vinyl 15 x 15cm

552844 Lower liferaft instruction sign Wall mounted Self adhesive vinyl 15 x 15cm

552455 Lower rescue boat instruction sign Wall mounted Self adhesive vinyl 15 x 15cm

552307 Red Parachute rocket Wall mounted Self adhesive vinyl 15 x 15cm

799


IMO Muster/Assembly station signs

MUMUSSTTEER AR AND AND ASSSSEEMBMBLLY SY STTAATTIOION SN SIGIGNSNS

Muster and assembly stations need both

guidance and position marking which our range

offers you. You can define your muster and

assembly stations by adding letters or numbers

to the main signs. Panoramic and wall-mounted

double sided signs project from walls and

corridors to ensure conspicuity from either

direction. You can choose from self-adhesive

vinyl or rigid PVC in a range of sizes and in

some cases orientations.

Features

• Wall-mounted or panoramic showing Muster Point sometimes used with a letter or number depicting point reference




Benefits



lighting conditions





IMO SOLAS Signs are designed to satisfy Chapter III,

Regulation 9.2.2 and Regulation 9.2.3 of the SOLAS

Convention. Signs are required to be easily seen under

emergency lighting conditions and used in accordance with

the recommendations of the IMO.


Product

number Description Fitting Material Size

552562 No 1 sign Wall mounted usually with assembly or muster station

signs

Self Adhesive vinyl 15 x

7.5cm


signs


7.5cm


signs


7.5cm


signs


7.5cm

552364 Assembly station sign Wall mounted Rigid pvc double

sided

15 x 30cm

800

Product

number Description Fitting Material Size

751232 Assembly station guidance sign Down

Right

Wall mounted Self adhesive vinyl 15 x 30cm

751235 Assembly station guidance sign Down left Wall mounted Self adhesive vinyl 15 X 30cm

751229 Assembly station guidance sign Right Wall mounted Self adhesive vinyl 15 x 30cm

751247 Assembly station guidance sign Left Wall mounted Rigid pvc double

sided

15 x 30cm

751244 Assembly station guidance sign UP Wall mounted Self adhesive vinyl 15 x 30cm

751223 Assembly station guidance sign Down Wall mounted Self adhesive viny 15 x 30cm

751238 Assembly station guidance sign Up right Wall mounted Self adhesive viny 15 x 30cm

751220 Assembly station guidance sign

Panoramic

Wall or corner mounted Self adhesive viny 15 x 30cm

751241 Assembly station guidance sign Up left Wall mounted Self adhesive vinyl 15 x 30cm

751226 Assembly station Right Wall mounted Self adhesive vinyl` 15 x 15cm

801


IMO Personal Protective Equipment signs

PPEERRSSOONANAL PL PRROOTTEECCTTIVIVE EE EQQUUIPIPMEMENT SNT SIGIGNSNS

Our comprehensive range of clear instruction

signs define areas personal protection

equipment must be worn.



and are approved by SOLAS.



orientations.

Features




Benefits



lighting conditions







751208 Wear Respirator sign Wall mounting Self adhesive vinyl 15 x 15cm

782146 Wear eye protection sign Wall mounting Self adhesive vinyl 15 x 15cm

751202 Wear hand protection sign Wall mounting Self adhesive vinyl 15 x 15cm

751196 Wear a face shield sign Wall mounting Self adhesive vinyl 15 x 15cm

652396 Use a welding mask sign Wall mounting Self adhesive vinyl 15 x 15cm

751214 Wear high visibility clothing sign Wall mounting Self adhesive vinyl 15 x 15cm

751199 Wear anti static footwear sign Wall mounting Self adhesive vinyl 15 x 15cm

751211 Wear protective clothing sign Wall mounting Self adhesive vinyl 15 x 15cm

751217 Wear a life jacket sign Wall mounting Self adhesive vinyl 15 x 15cm

652370 Wear foot protection sign Wall mounting Self adhesive vinyl 15 x 15cm

751205 Wear a safety harness sign Wall mounting Self adhesive vinyl 15 x 15cm

652388 Wear goggles Wall mounting Self adhesive vinyl 15 x 15cm

802


IMO Prohibition signs

IMO PIMO PRROOHIBHIBITITIOION SN SIGIGNSNS

Our range of prohibition signs is designed to

instruct and alert to prohibitive actions.




Features

• ISPS code




Benefits



lighting conditions







751250 No Radio transmitters sign Wall mounted Self adhesive vinyl 15 x 15cm

751262 No drinking or eating sign Wall mounted Self adhesive vinyl 15 x 15cm

751259 Not drinking water sign Wall mounted Self adhesive vinyl 15 x 15cm

751256 No escape route sign Wall mounted Self adhesive vinyl 15 x 15cm

751253 No thoroughfare sign Wall mounted Self adhesive vinyl 15 x 15cm

652230 No smoking beyond this point sign Wall mounted Self adhesive vinyl 15 x 15cm

652347 Dont throw garbage overboard sign Wall mounted Self adhesive vinyl 15 x 15cm

526558 No Admittance Wall mounted Self adhesive vinyl 20 x 30cm

803


IMO Security Instruction signs

IMO SIMO SEECCUURRITITY INSY INSTTRRUUCCTTIOION SN SIGIGNSNS

Our range of security instruction signs are clear

and concise and are written within the ISPS

code to make security instructions clearly

understood.






orientations.

Features

• ISPS code




Benefits



lighting conditions







751268 Multi instruction no unauthorised persons,valid identification, baggage search sign Wall mounted Self adhesive vinyl 30 x 30cm

751265 Crew only no unauthorised access sign Wall mounted Self adhesive vinyl 15 x 30cm

751286 Multi inctruction, weapons,photography or persons sign Wall mounted Self adhesive vinyl 30 x 30cm

751271 Mobile phones must be switched off Wall mounted Self adhesive vinyl 10 x 30cm

751283 Restricted area no unauthorised entry Wall mounted Self adhesive vinyl 10 x 30cm

751280 Restricted area authorised personnel only Wall mounted Self adhesive vinyl 10 x 30cm

751289 Restricted are sign Wall mounted Self adhesive vinyl 10 x 30cm

751274 No Photography sign Wall mounted Self adhesive vinyl 10 x 30cm

751277 No weapons,incendairys or explosives sign Wall mounted Self adhesive vinyl 10 x 30cm

804


IMO SOLAS tape

RREETTRROORREEFFLLEECCTTIVIVE TE TAAPPEE

820 606206

Retroreflective tape enhances the visible

aspects of SOLAS life support equipment such

as life vests, life jackets, rafts and lifeboats to

name a few. Our tape is made up of an

encapsulated lens-type sheeting with a flexible

and highly transparent plastic film, providing high reflectivity over a wide range of entrance angles so

ensuring you are seen when needed. Full reflective properties even when wet!

Features

• MED/USCG approved

• Durable

• Anti de-lamination

• High reflectivity wet or dry

Benefits

• The self-adhesive properties allow it to be adhered to most LSA products without the need for specialist surface

preparation

• The 50 metre rolls provide ample coverage for any repairs or renewals required

• It is extremely flexible making a positive contact even on curved surfaces so ideal for rescue boats, lifeboats and

lifebuoys.

• Even when wet you will get the full reflective benefit

Technical data

Size 55 MM X 45 MTR

805

�� -�� !" "# 5�� (�� %��& �'��-�&��$�(��)�'*

�� -�� !" "# 5�� (�� %��& �'��-�&��$�(��)�'�

SAFETY


LIFE SAVINGMEDICAL

ENVIRONMENTAL

MEDICAL

When medical emergencies arise, it is important that ships’ crews are adequately trained and prepared for every eventuality. Amongst our range of medical products, we offer specialist medical equipment that has been specifically designed to be easy to use, rugged and reliable.

SSAAFFEETTYY Defibrillators

Defibrillators

DDEEFFIBIBRRILILLLAATTOOR HER HEAARRTTSSTTAARRT FT FRRX INCX INCLLUUDDINGINGPPAADDS AS AND SND SOOFFTTCCAASSEE

825 755942

The Philips HeartStart FRx Defibrillator is

designed to be easy to use, rugged, and reliable for those who get there first.

Features

• Philips SMART Biphasic technology delivers a highly effective defibrillation shock while also gentle to the heart

• Philips SMART Analysis Device only shocks when required, even if the shock button is pressed

• SMART Pads II enable the FRx to keep pace with the responder by adjusting to their actions

• Self testing

Benefits

• Protects crew and passengers

• Easy to set-up and use

• Clear instructions, step by step guidance through the screen

Technical data

Waveform Truncated Exponential Biphasic

Single

energy

output

Adult: nominal 150 Joules into a 50-ohm load Infant/

Child: nominal 50 Joules into a 50-ohm load

Battery Type 9 Volt DC, 4.2 Ah

Dimensions 6 x 18 x 22 cm ( H x D x W)

Weight 1.5 kg

808

SSAAFFEETTYY Medical Oxygen

Medical Oxygen Systems

MEMED OD OX SX SYYSSTTEEM IMOM IMO, O, OUUTTSSIDIDE EE EXXCCL MOL MOXX--4040CCYYLLINDINDEERR

826 610253

Complete outside medical oxygen system that

meets latest IMO IMDG/MFAG regulations for

shipboard use to supply oxygen to two persons

at the same time.

Features

• PiSS Valve (Pin Index Safety System) connection as

standard

• Complete system supplied in one box

• Complete installation instructions

Benefits

• Compatible with Unitor Mox-40 cylinders exchange

system

• Easy installation

• Two separate flow meters allowing for independently

different flow rates to each patient


Supplied with:

Product number Item no. Quantity Description

611 320358 1 1 Rack for 1 Cylinder

719 905617 2 1 Breathing Oxygen MOX-40 Filling

831 596221 3 1 Adaptor with Bracket

831 510021 4 1 Regulator Oxygen

831 682435 4a 1 Adaptor 8mm >3/8"BSP

831 596445 5 1 Gas Outlet MC70 O2 for Bulkhead Mounting

831 596403 6a 2 Rail

831 617886 6 2 Flowmeter for Rail mounting

831 596361 7 2 Humidifier 0.25 l

831 610188 8 1 Ox Therapy Mask (Disposal 10 Pack)

831 625038 9 1 High Pressure Hose Ox. Yoke / W21.8 x 1/14" 1mtr

831 606124 10 1 T-Piece with Ox. Quick Coulpings

831 763581 11 1 Sign "Oxygen"

831 638387 Opt. 1 Cabinet IMO Medox F/1 Cyl. Steel

Approvals

IMO/MFAG approved

809



MEMED OD OX SX SYYSSTTEEM. IMO BM. IMO BEEDDSSIDIDE EE EXXCCL MOL MOXX--4040CCYYLLINDINDEERR

826 610261

Complete bedside medical oxygen system that

meets the latest IMO IMDG/MFAG regulations

for shipboard use to supply oxygen to two

persons at the same time.

Features

• PiSS Valve (Pin Index safety system) connection as

standard

• Complete system supplied in 1 box


Benefits


• Two separate flow meters allowing for independently different flow rates to each patient

• Compatible with Unitor Mox 40 cylinders cylinder exchange system


Supplied with:




831 608414 3 1 Regulator with Quick Coupling

831 608406 4 1 Double Outlet O2 for rail with hose and male coupling

831 596379 5 2 Flowmeter for Gas Outlet

831 596361 6 2 Humidifier 0.25 l


831 596403 8 1 Rail 1-Slit

831 763581 9 1 Sign "Oxygen"

Approvals

IMO/MFAG approved

810



MEMED OD OX SX SYYSSTTEEM IMOM IMO, NO, NORRWWEEGGIAIAN TN TYYPPE EE EXXCCLLMOMOXX--40 C40 CYYLLINDINDEERR

826 653295

Complete bedside medical oxygen system that

meets the latest IMO IMDG/MFAG regulations

for shipboard use to supply oxygen to two

persons at the same time. In the event of a

cylinder leakage the IMO Norwegian system

ensures the safety of vent to free air pipe.

Features

• PiSS Valve (Pin Index safety system) connection as

standard

• Complete system supplied in 1 box


Benefits

• Compatible with Unitor Mox 40 cylinders cylinder exchange system


• Two separate flow meters allowing for independently different flows rates to each patient


Supplied with:






831 510021 5 1 Regulator Oxygen

831 608406 6 1 Double Outlet O2 for Rail Mounting

831 653287 7 1 Quick Coupling Oxygen to 3/8"

831 596403 8 2 Rail 1 Slit

831 596379 9 2 Flowmeter for Gas Outlet

831 596361 10 2 Humidifier 0.25 l


831 763581 12 1 Sign "Oxygen"

Approvals

• IMO/MFAG Approved

811


Medical Oxygen Resuscitators

OOXXYYGGEEN RN REESSUUSSCCITITAATTOOR WR WITITHOHOUUT CT CYYLLINDINDEERR

825 652131

The Unitor oxygen resuscitator fulfills your

needs onboard your vessels to manually provide

medical oxygen as required by the medical first

aid guide. This resuscitator is designed to

enable you to concentrate on looking after the

patient, not on operating the equipment. There

is no danger of you inflating the patients lungs.

The MOX cylinder is part of the Unitor global

cylinder exchange system and you can

exchange it in most ports.

Features

• Less MOX 2lt/200 bar cylinder

• Numerous sizes of guedel airways

• Manual ventilator with different sizes of oxygen masks

• Complete with bag

Technical data

Length 530 mm

Height 220 mm

Weight 5.1 kg

It is designed to meet BS6850:1987 for ventilatory

resuscitators.

Benefits

• You can simply enter the Unitor cylinder exchange

program and not worry about refills

• It is simple to use and requires no specialist training

• You do not have to make judgements on the lung

capacity of the patient to select a tidal volume, only

the basic size or type of patient being cared for

• Even if you select the wrong setting the ‘fail safe’ will

vent excess gas whilst giving the operator an audible

warning that the equipment is not being used

correctly


Supplied with:

Product No Description

652180 Bag for Resuscitator

763967 Adj. Reducing Valve and Yoke

652198 Ventilator with Mask, Reservoir, Tubing

652164 Head Harness

608455 Guedel Airways Set 2 x Sizes 2,3,4

652172 Extension Tube with Adaptor

691808 Spare Seal for Piss Valve

647735 Knob Manipulator

812


Medical Oxygen Resuscitators

MEMEDDICICAAL SL SUUCCTTIOION UN UNITNIT

825 589937

The V-VAC Manual Suction Unit is ideal for first responder emergency kits and as back-up suction.

Features

• One-handed operation, one-piece disposable cartridge and unique no-clog suction tip

• Adjustment for high and low pressure suction

• Features a unique no-clog suction tip (intake valve)

• Efficient: maximum suction exceeds 380 mm Hg

• Peak air flow over 70 litres per minute

Benefits

• The versatile catheta connection gives you the scope to use on it for many different persons

• The disposable one-piece cartridge provides a new, clean pump, valve and suction tube each time you use it

• You simply immerse the reusable handle for cleaning

• All parts are latex-free to prevent any reactions

Technical data

Vacuum range 170 - 380 mmHg (23 - 51 kPa)

Flow rate 70 LMP

Cartridge capacity 425 ml canister

Weight 0.292 kg (0.644 ibs)

To clean

• Reusable handle

• Throughly clean handle after each use by scrubbing

in warm soapy water

• Rinse and dry

• Single use disposable cartridge (canister)

• All parts except the handle is designed for single use

only

Approvals

CE marked - this product is in compliance with the essential

requirements of Council Directive 93/42/EEC as amended

by Council Directive 2007/47/EC.

813

�� -�� !" "# /�% �� %��& �'��-�&��$�(��)�'*

�� -�� !" "# /�% �� %��& �'��-�&��$�(��)�'�

SAFETY


LIFE SAVINGMEDICAL

ENVIRONMENTAL

ENVIRONMENTAL

In the event of a marine oil spill, a fast, efficient response is essential. Our oil spill kits are designed to be deployed easily and effectively when used in conjunction with the vessel’s response plan (as specified by IMO and OPA90).

SSAAFFEETTYY Oil spill kits

Oil spill products

OOIL SIL SPPILILL KL KITITSS

Unitor oil spill kits are designed as a marine oil

spill response measure to be deployed easily

and effectively. They must be used in

conjunction with your vessels response plan as

required by IMO and OPA90. Whether you use

them as spill control or maintenance protection

our absorbents will take in up to 25 times their

own weight.

Features

• Complete kit

• Personal protection

• Waterproof box

• Full range of spares available

Technical data

Contents Vary depending on size of kit

Yellow storage box

Roll of plastic bags

Sorbent pads U94200

Spill kit gloves

Once only use one piece suits

Aqaubreak PX a waterbased cleaning chemical

Jet spray tool

1 oil spill kit bag **ContainingSorbent booms

1 oil spill kit bag **ContainingSorbent pads U9450 -Sorbent rolls

U94150S

1 Barrel kit does not include an oil spill kit bag

Benefits

• All kits are designed to meet the IMO and OPA90

recommendations

• As well as providing the tools for tackling the spill the

kit also includes personal protection equipment

• The box is waterproof so you can store it on deck

ready for an emergency

Unitor oil spill kits come in 3 sizes:

• 12 barrel to handle 1900 litres of deck spill for tankers

400 ft or greater carrying bulk oil

• 7 barrel to handle 1000 litres of deck spill for tankers

under 400 ft

• 1 barrel for inland oil barges



592717 12 barrel (1900 litres) complete kit

597237 7 barrel (1100 litres) complete kit

597245 1 barrel complete kit

604314 7 barrel sorbent kit

816


Oil spill products

OOIL SIL SPPILILL CL CAARRE AE AND MAND MAINTINTEENANANCNCE TE TOOOOLLSS

Oil spills are messy business and having the

correct non sparking tools to do the job

properly goes along way to making your life

easier. We offer a range of plastic tools for

scrapping, collecting and gathering oil spills.

Features

• Non sparking

• tough plastics

Benefits

• The non sparking features gives you a higher level of

safety

• These tools are basic but will give you a tough and

durable life

• You can reuse after cleaning



607440 Plastic bucket 10 litre capacity

607441 Squeegee with wooden handle 610mm width

607442 Plastic scoop 138 x 187 x 310mm

607443 Plastic spatula - 4" blade 100 x 250mm

607439 Safety shovel large blade

817


Oil spill products

OOIL SIL SPPILILL KL KIT SIT SPPAARRE SE STTOORRAAGGE BE BOOXX

940 592725

Waterproof for on deck stowage and use for

storing Unitor oil spill kits. Can be used as a

stand alone for other storage requirements.

Features

• Bright yellow colour for easy identification

Benefits

• Waterproof

• Multi-use

OOIL SIL SPPILILL KL KIT SIT SPPAARRE 1000 L WE 1000 L WAASSTTE BE BAAGG

940 592774

For use with Unitor oil spill kits or can be utilised as a stand alone product. The waste bag allows you

to collect oil waste, store it and dispose when in port. The sealed top keeps your contents safe until

you are ready to dispose of them.

Features

• 1000 litre capacity

• Fold away

818


Sorbents & Booms

SSPPILILL KL KIT SIT SOORRBBEENT PNT PAADDSS

Our range of sorbent pads will save you time,

costs and workload when cleaning up oily,

chemical or flammable liquids after a spill.

Extremely high absorption rates ensure you

contain and clean as quick as possible saving

you time and costs.

Even when fully saturated they will keep their

shape for easier handling.

Features

• Oil only absorption pads

• High absorbency rate

• Keeps shape even when fully saturated

Benefits

• They offer a fast and efficient way of ensuring a quick

containment of your spill

• By keeping their shape it is easier for you to handle

them


Product number Description Size Absorption rate

592733 50 pack of oil only pads U9450.

Large pad will tackle your oil spills that have spread quickly.

97 x 86cm 310 litres

603167 100 pack of oil only pads U94100 48 x 43cm 155 litres

592758 200 pack oil only absorption pads U94200 48 x 43cm 155 litres

603175 100 pack oil only absorption pads U94230 30 x 30cm 65 litres

819


Sorbents & Booms

SSOORRBBEENT RNT ROOLLLLSS

Our range of sorbent rolls give you the option to

tailor make your own oil spill cleaning solutions.

By providing sorbents on a roll you can cut it to

the size you want.

It is easy to tear of the length needed, useful for

various applications.

Features

• For multiple applications

• High absorbency rate

• Keeps shape even when fully saturated

Benefits

• Simply tear or cut the required length you require

• Regardless of your spill whether oily, flammable or

chemical we can offer you a solution for your

cleaning requirements

• They offer a fast and efficient way of ensuring a quick

containment of your spill

• By keeping their shape it is easier for you to handle

them and not have an oily mess in your hands


Part number Description Size each Absorption rate

592741 2 rolls oil only U94150S 44 metres x 48cm 310 litres

603183 1 roll oil only U94150 44 metres x 97cm 310 litres

603191 1 roll oil only UP4300 88 metres x 97cm 310l itres

Static resistant

603209 2 rolls oil only U94300S 88 metres x 48cm 310 litres

603324 1=2 rolls static resistant U943601S 44 metres x 48cm 310 litres

820


Sorbents & Booms

SSOORRBBEENT PNT PAARRTTICICUULLAATTE UE U9494

941 603274

Our sorbent particulates makes it easier to

clean spills by absorbing any residues and

providing you with a solid to clean up rather

than liquid. You can spread it over walkways

and floors or throw it over open water to absorb

spills.

Features

• High absorption rates

• Flexible use

• Easy to dispose

• Easy to handle

Technical data

Description Oil spill particulate U94

Weight 11.3 kg

Quantity 1 bag -

Absorb. Capacity 202 litres

Benefits

• It gives you absorption rates up to 25 times its own

weight and does not absorb water

• Easy to handle and recover- its 100% chopped

polypropylene materials absorbs oil based liquids so

you can simply shovel up the spill or use a net in the

water

• You can incinerate it making it easier to dispose of

821

SSOORRBBEENT SNT SWWEEEEP UP U949418001800

941 603241

Our sorbent sweep is easily controllable

allowing you to skim the water surface and

collect oil spills. The multi-layer system contains

oils and hydrocarbons giving you a strong tool

that also repels water.

Features

• Easily controllable

• Easy disposal

Technical data

Length 30000 mm

Width 460 mm

Weight 6.4 kg

Quantity 1 -

Absorb. Capacity 114

Benefits

• The sweep has built in tension straps so you can

control the recovery of the sweep

• It can be incinerated making it easier to dispose of

822


Sorbents & Booms

SSOORRBBEENT PNT PILILLLOOWWSS

These absorbent pillows give you many options

to contain, clean and protect vulnerable area's

from oil spills.

They absorb all types of oils and hydrocarbons

giving you high absorption high rates and repel

water.

Features

• High absorption rates

• Flexible use

• Easy to dispose

• Easy to handle

Benefits

• They absorb up to 25 times their own weight

• The absorption materials are held in a sock making them ideal to stopping spills going under doorways or

cupboards. You can also them for cleaning oil spills

• You can incinerate them so are easy to dispose

• Their small length makes allows you to lay them along an area and makes them easier to handle than oil booms



603258 Oil spill pillow U9410P 10 piece pack 46cm x 20cm dia 155 litres



823


Sorbents & Booms

SSOORRBBEENT BNT BOOOOMSMS

Our range of absorbent booms give you highly

flexible options to contain oil spills.

All give you the ability to link them together into

any length.

Booms prevent spreading and stop

contaminants getting into the sea so are a vital

part of your oil spill kit.

Features

• Highly absorbent

• Absorption material contained

• Can be linked

• Easy disposal

Benefits

• Filled with 100% polypropylene contained in a net sock ensures you do not lose any spill when recovering

• The metal hooks at either end allow you to link them together for your required length

• You can incinerate them for easier disposal



592766 4 pieces oil boom U94410S 3 metres x 13cm 114 litres

603217 4 pieces(double) oil booms U94410 3 metres x 10cm 228 litres

603233 4 pieces oil boom with net U94810SN 3 metres x 20cm 392 litres

824

826

WILHELMSEN TECHNICAL SOLUTIONS

1230 Clean Agent Fire Extinguishing System

High Pressure Co2 Fire Extinguishing System

Unitor Dry Chemical Powder Fire Extinguishing System

Unitor High Expansion Foam Fire Extinguishing System

Low Expansion Foam Fire Extinguishing System

Portable Foam Applicators

Fire Fighting Foam Concentrates

Local Application Fire Fighting System

Sample Extraction Smoke Detection System

Generon Nitrogen Membrane Inert Gas System

SAFETY SYSTEMS

Wilhelmsen Technical Solutions has over many years supplied safety solutions for newbuilds and retrofits in the maritime and offshore markets. By offering the best available safety technologies for fire prevention, detection and suppression solutions, and portable safety equipment we help you stay safe.

We have the solutions, knowledge, people, local presence and global reach to help our customers stay safe and compliant under operation.

Our range of safety solutions include fire prevention, detection and suppression systems, and portable safety equipment. Based on a range of extinguishing agents (CO2, clean agent, high and low expansion foam, dry chemical powder and water) we offer systems to protect the whole range of applications.

827

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'2

Unitor 1230 Clean agent fire extinguishing system is a total flooding system for machinery spaces of category A, cargo pump rooms on tankers, cargo compressor rooms, electronic and storage spaces.

Unlike Halon-based systems, the Unitor 1230 has no environmental impact and is safe to use in areas where the crew works. Because of the system’s low stored pressure of 34.5 bar and small pipe dimensions, it can even be retrofitted directly on existing piping arrangement previously used for Halon.

SYSTEMSWILHELMSEN TECHNICAL SOLUTIONS

UNITOR 1230 CLEAN AGENT FIRE EXTINGUISHINGSYSTEM

Applicable toEngine roomsPump rooms Compressor roomsSwithcboard roomsEngine control rooms

This system is part of a family of systems for this application, please see HiFoam and CO2 to compare.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�

System description The Unitor 1230 system uses Novec 1230 fluid, which is stored in steel cylinders, pressurised with nitrogen to 34.5 bar at 21°C. The cylinder valve outlets are connected to distribution pipes with discharge nozzles via flexible hoses. The cylinder valve assembly can be equipped with burst discs and a supervisory pressure switch for monitoring the pressure drop in the cylinder. The valves can be activated electronically, pneumatically or manually.

Flexible installationModular system – cylinders are stored inside the protected compartmentsCentral system - central bank of cylinders outside of the protected spaces, extinguishing fluid distributed through piping network Combination of the above

All components are designed for optimum system performance. Time delay and pre-discharge alarm are provided as per Rules requirement.

ComplianceIMO MSC/Circ. 848IMO MSC/Circ. 1267Equivalent to Fire extinguishing systems required by SOLAS 1974 as amended, Chapter II-2.

The system is in accordance with SOLAS and the IMO MODU code and can be used on merchant marine and offshore structures.

Technical data Cylinders

Volume 14 to 345 litres

Storage pressure 34.5 bar at 21 °C

Material steel

Standards EN or US DOT

Certificates all major classification societies

Nozzles

Material brass, suitable for application up to 925 °C

Size: 1/2” to 2 1/2”

Unitor 1230 system uses Novec 1230 fluid* (*developed and manufactured by 3M.) It is stored as liquid and discharged as gas, suppressing fire by a combination of heat absorption and chemical interference with the flame

Large nozzle coverage with a unique discharge pattern especially developed for maritime and offshore industries

No measureable impact on climate change:- Ozone Depletion Potential (ODP) is zero- Global Warming potential (GWP) is 1- Atmospheric life time of only five days

Low design concentration of 5.5% to 6% in combination with a safety margin of up to 100%.

The US EPA Significant New Alternatives Program (SNAP) classifies Novec 1230 fluid as acceptable for use as a total flooding agent in occupied spaces.

Common configurations

Modular Central

Volume 14 to 345 litres

Material steel

Certificates all major classification societies

Material brass, suitable for application up to 925 °C

Benefits

Harmless to people and the environment Small pipe dimensions saves installation space, weight and lowers total installation cost

Flexible installation options, smaller footprint than for CO2

systemsReplacement fluid is available worldwide

Features

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'+


UNITOR HIGH PRESSURE CO2 FIRE EXTINGUISHINGSYSTEM

The Unitor high pressure CO2 fire extinguishing system is a total flooding system for closed spaces. CO2 is the quickest and most cost effective way of extinguishing fire in closed spaces with minimal risk to equipment and the environment. It is commonly used in machinery spaces of category A, engine rooms, pump rooms and cargo holds onboard vessels and offshore installations. CO2 suppresses the oxygen content in the room, thereby asphyxiating the fire almost immediately.

Applicable to

Machinery spaces of category ACargo spaces for dangerous goodsSealed ro-ro cargo spacesCargo pump rooms on tankers (oil and chemical)Cargo compressors rooms on gas tankers (LNG & LPG)Spaces containing flammable liquids (paint stores)Galley range exhaust ductMain engines scavenge boxes

This system is part of a family of systems for this application, please see HiFoam and Unitor 1230 to compare.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�

Material of construction

Body steel

Stem and ball stainless steel

Certificates all major class certificates or according to specification

Manifold

Size DN40 – DN100

Nominal pressure PN100 and PN160


Body steel


Size DN40 – DN100

j g p

System descriptionThe Unitor CO2 system consists of a high pressure cylinder bank, a release cabinet, a piping system leading to a grid of nozzles in the protected area. Each high pressure cylinder is connected via flexible high pressure hoses to a common manifold. The cylinder bank can have either manual or pressure operated cylinder top valves, depending on the vessel’s application.

For safety reasons the release cabinet is located outside the protected space, and must be operated manually. When the cabinet is opened, microswitches activate CO2 alarms to allow for evacuation. After a defined time delay, the distribution valves open and gas is spread rapidly into the protected areas, quickly extinguishing the fire.

Features Pressure operated cylinder top valves ensure quick discharge of CO2, and almost instantaneous extinguishing of the fire reducing potential cost of damages

A manual release system is available for individual or sequential release of the CO2 cylinders

The system is equipped with alarms and a safe release delay function to ensure the safety of your crew

Benefits CO2 leaves no residue to clean up High quality system, easy to install and operate Requires minimal maintenance, keeping operating costs low

Aftersales services and refilling of the CO2 cylinders is available worldwide

Technical data Cylinders

Volume (ltr) 67,5 / 80

Weight of CO2 gas (kg) 45 / 54

Storage pressure@20°C (bar) 58,5

Test pressure (bar) 250

Certificates All major classes

Standard ISO, EN or US DOT

Release cabinet

Cylinders 2,68 ltr with 1,72 kg CO2

Degree of protection IP55

Distribution valves

Sizes DN20 to DN150

Nominal pressure PN100 and PN160

Common configuration

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'1

InstallationThe system can be supplied on rack modules saving installation time and cost. The cylinder bank must be installed in a well-ventilated and insulated room.

OptionsThe system can be combined with the Unitor Local application fire fighting system, providing total fire protection for engine rooms. Local systems for paint lockers and galley

ducting are available. Smoke sampling systems for cargo holds can also be incorporated into the CO2 system package.

ComplianceThe system is in accordance with SOLAS and the IMO MODU code and can be used on merchant marine and offshore structures. The system is approved by all major classification societies.

About CO2

CO2 is a colourless, non-corrosive gas that causes no damage or chemical reaction to metals, electrical equipment, applied surfaces or oil. The gas is usually compressed to liquid state in high pressure cylinders for storage. Its shelflife is indefinite.

The gas is highly suffocative and hazardous to humans. The Unitor CO2 system is designed with a pre-alarm system and time delay function to allow evacuation prior to system release.

Wilhelmsen Technical Solutions uses CO2 gas recovered from an industrial process, giving a smaller environmental impact.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'-


UNITOR DRY CHEMICAL POWDER FIRE EXTINGUISHING SYSTEM

The Unitor Dry chemical powder system is a highly effective fire extinguishing system especially developed for cargo decks, cargo manifold areas and tank areas on gas carriers. It can be installed as a central, modular or hybrid system to ensure complete reach even in small or partially covered areas. All three versions comply with the IMO Code for the construction and equipment of ships carrying liquified gases in bulk.

Gas carriers’ cargo decks, cargo manifold areas and tank areas LNG fuelled vessels’ filling pipes and manifolds

Other merchant marine and offshore structures

Applicable to

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�

Technical dataTanks

Material steel

Capacity (kg) 160– 2500

Pressure class PN16

Certification as required by class

Cylinders

Material steel

Capacity (ltrs) 50

Pressure (bar) 200

Certification as required by class

Powder

Type BC Jet

Monitor

Material stainless steel

Capacity (kg/s) above 10

Flange connection DN50 and DN65

Pistol


Capacity (kg/s) 3,5

Cabinets

Material GRP (glass fibre)

Type of operation pneumatic


System descriptionUsing nitrogen as propellant, the system ejects dry powder from monitors and hose stations. The system can be deployed using fixed monitors, hand held hoses or a combination of both ensuring complete reach even into the smallest areas. The system can be remotely operated from the release boxes via pilot cylinders, or manually at the dry powder central. To meet the flow rate and capacity requirement of your vessel, each project is calculated

especially. There are three installation options: central, modular or hybrid.

Installation optionsCentral systemMost common layout, giving the highest flexibility in discharge volume as the whole powder capacity can be discharged from one monitor or hose station.

Features Flexible and high quality fire extinguishing system Easy to install and operate Extensively and independently tested system, regulatory compliant

Powder monitors and non-kinking hoses with pistols ensure complete reach of all areas on deck, including small and/or partially covered areas

The modular system options are self-contained. Each hose/ monitor unit has its own powder storage vessel, no need for powder pipework

Modular unit sizes range from 160kg to 1000kg capacity Modular units can also be used for extra protection of car decks, heli decks and cargo decks on chemical tankers

Flexible piping options

Benefits Non-toxic powder, harmless to both crew and environment Almost immediate fire extinction as the powder breaks the chain of combustion

Standardised system components minimise maintenance and operational costs

Skid unit solution available, reducing installation time and cost

Custom made solutions in accordance with rules and regulations

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*4

Dry chemical powderEffective for use on class B and C. Physiologically harmless and non-toxic to humans. Environmentally harmless. The powder extinguishes fire by breaking the chain of combustion.

The dry powder is a mixture of different salts of acids, mainly potassium sulphate with additives preventing lumping and moisture from decreasing shelf life.

On deployment, nitrogen gas pressurizes the tank and nozzles in the bottom atomises the content. The powder causes the flame to go out almost immediately, isolating the fuel from oxygen and flame radiation. The sudden extinguishing effect is caused by suffocation and anti-catalytic effect, a chemical intervention of the combustion process.

The dry powder is stable at both low and high temperatures. However, the containers should be kept tighly closed and stored in a dry location to prevent absorption of moisture.

Central system Consisting of a powder central including powder tanks, nitrogen cylinders and selector valves. Located outside the cargo area, the powder central’s capacity is determined by the number of connected hose stations and monitors.

Monitors and hose stations are installed on the cargo deck, positioned to protect the manifold by at least to hoses at any point. Monitors are operated from an adjacent release cabinet or remotely from aft of the cargo area. The hose stations have integrated release cabinets.

Modular systemSelf-contained hose and monitor units eliminate the need

for powder pipework, lowering installation cost. Units are offered in sizes from 160 - 1000kg capacity. The modular units are ideal for extra protection of car decks, heli decks and cargo decks on chemical tankers.

Hybrid system An economic solution for larger Gas Carriers, the hybrid system gives the discharge volume flexibility of a central system but with reduced pipe work installation costs.

ComplianceFor use on merchant marine and offshore structures, compliant with IGC and IBC codes and in compliance with Class requirements.

Powder bank Hose station and pistol

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'**


UNITOR HIGH EXPANSION FOAM FIRE EXTINGUISHING SYSTEM

Unitor High expansion foam fire extinguishing system is a total flooding system ideal for protecting machinery spaces (category A) such as engine rooms, purifier rooms and incinerator rooms, as well as pump rooms. It can be installed as a total flooding system for the entire engine room or for individual compartments. It is highly effective and safe both for your crew and the environment, making it a viable alternative to CO2.

Applicable to

Engine roomsPump rooms Compressor roomsElectronic and storage spaces

This system is part of a family of systems for this application, please see Unitor 1230 and CO2 to compare.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*�

Generators

Foam capacity

UFG-90 (m3/min) 60

UFG-60 (m3/min) 40

UFG-30 (m3/min) 20


Nom.working pressure 6 bar (@generator)

Expansion ratio 1:700

Connection flange DN20

Mixing equipment

Type balanced pressure

proportioner or inductor

Capacity (l/min) 75 to 20.000

Material stainless steel and bronze

Tank

Type cylindrical

Material GRP (glass fibre)

stainless steel on request

Opening full size manhole for inspection

Foam concentrate

Type synthetic

Viscosity (cSt) @ -2°C < 60

Lowest working temp. -2°C

Storage temp. -2°C to +45°C

Approval MED certified

Pump

Type centrifugal multi-stage


Voltage/frequency (v/H2) 3 x 440/60 or on request

Insulation and enclosure class F, IP55


Technical data

Features Foam expansion rate of 1:700 using the air in the

installation space, no need for air ducting and fans for external air supply

Improved filling rate of 1.8 metres per second - proven to be most effective for machinery space fires

Sequential release design - optimised protection and reduced water capacity needed

Quick release reduces fire and heat damage to equipment and structure

Foam generators come in three sizes, giving flexibility in design and installation onboard

The foam is generated in situ, no need for external foam generating room

Benefits Safe and harmless for crew Can run on fresh or sea water Space saving, lightweight and cost efficient alternative

to CO2

Foam leaves no hazardous decomposition products Minimal and easy maintenance Low service and maintenance cost

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*2

System descriptionThe system can be installed both as a total flooding and a local system protecting machinery spaces such as engine rooms, purifier rooms, incinerator rooms, as well as pump rooms.

The system consists of a storage tank for foam liquid, foam pump and proportioner located in the foam central room. The foam is mixed with water in the proportioner and discharged through the foam generators. These generators are installed at the highest level in the protected space, at strategic locations above high risk areas. The water/ foam mixture blends with air in the generators. Unlike other systems, the Unitor High expansion foam system uses the air in the protected space, meaning no ducting or fans are required. The foam falls directly down from the generators, covering the entire protected space, quenching the fire.

The system can be remotely operated by the main control cabinet, or via the local control cabinets. Manual operation is also possible by opening the valves and starting the water and foam pump manually.

Installation

installation

OptionsThe Unitor High expansion foam system can be designed for sequential release by splitting the system and spaces in several distribution lines. This unique operation feature optimises protection of high risk areas and reduces the required water capacity. The system can also be combined with Unitor Local application fire fighting system providing

Compliance Complies with SOLAS and approved by major classification societies

Extensive indepentent testing in accordance with IMO MSC/Circ. 1384

Foam testing according to IMO MSC/Circ. 670 Foam concentrate complies with requirements of European Council Directive 96/98 on Marine Equipment Directive (MED)

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*�


UNITOR LOW EXPANSION FOAM FIRE EXTINGUISHING SYSTEM

Unitor Low expansion foam fire extinguishing system effectively protects open space areas like the cargo deck from fires. Foam is lighter than combustion materials such as oil or petrol, and forms a stable blanket on top of these, sealing against oxygen, effectively extinguishing the fire and reducing radiated heat.

Designed for simple, reliable operation the new generation foam monitor changes from jet to fog operation in one smooth movement, giving better control of the foam coverage area.

Applicable to

Cargo tank areasTanker sternBow loading areasHelidecksOpen spaces on offshore supply vessels and oil, product and chemical tankersBilge areasPurifier roomsFloating storage facilities and offshore structures

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*+


FeaturesSimple and rapid operationEfficient extinguishing of fires on hydrocarbonsStable foam blanket on extinguishing surface- Minimises re-ignition hazard- Heat radiation reductionGood cool down ability- Minimises fire damageWide range of foam concentrates available- Cover needs of extinguishing for most of liquid cargoes

Foam monitor Monitors available with manual or remote, hydraulic operation

Unique moulded housing with specially developed fog/jet nozzle

Made of stainless steel, increased durability and reduced need for maintenance

Fast and effective fire extinction despite wind and constant supply of oxygen

Corrosion protected components for a robust, low maintenance system

Balanced pressure proportioner guarantees reliable foam mixing

Benefits Harmless to people and the environment Monitors placed at safe distance, improved throwing length helps keep the crew and vessel safe

Easy operation due to compact design and low weight System operation can be integrated with bridge systems Modular skid units make footprint small and installation easy

Custom made solutions in accordance with rules and regulations

For service purposes, foam concentrate replacement is delivered worldwide

Technical data

Monitor

Capacity (l/min) 1000– 12500



Applicator

Capacity (l/min) 400


Pressure (bar) 3 or 6

Foam concentrate

Types full range of protein and synthetic

Tank

Type cylindrical

Material glass fibre reinforced polyester (GRP)

stainless steel on request

Opening full size manhole for inspection

Mixing equipment

Type balanced pressure proportioner or inductor

Capacity (l/min) 75 to 20,000

Material stainless steel and bronze

Pump

Type centrifugal multi stage

(& positive displacement)


Voltage/

frequency (V/Hz)

3 x 400/50

3 x 440/60 or on request

Insulation and

enclosure

Class F, IP55

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*�

Technical descriptionThe system consists of a reinforced foam tank, foam pump, proportioner, foam monitors and portable foam applicators or foam spray nozzles. All components are sturdy and corrosion resistant.

The monitors, portable applicators and foam spray nozzles are used either individually or in conjuntion to effectively put out the fire. Portable applicators cover shadow areas not reachable by the monitors.

The Unitor low expansion foam system can also be used in machinery spaces as an addition to a total flooding system. Foam will then be discharged from fixed outlets like foam spray nozzles. For this set up inductor type portable foam applicators are also required.

Foam monitorsThe Unitor foam monitors represent a new generation in its field. The manually adjustable fog/jet nozzle is easy to operate giving increased operational flexibility. With one simple movement, the operator can adjust the spray pattern from fog to jet operation. The result is better control of the foam coverage area.

Foam centralThe foam central is located outside the protected area, ajacent to accommodation spaces and readily accessible in the event of a fire. The main components are: a foam tank with foam concentrate, foam pump and proportioner.

The foam tank is available in a range of sizes, the size is determined by application area and calculated period of operation. The tank is normally made from Glass fibre reinforced plastic (GRP). There are three advantages to this: Non-corrosive, some foam concentrates corrodes steel for instance

Chemically stable, protecting the foam from contamination Strong, lightweight material

InstallationThe foam central components can be delivered on skids, reducing installation time and cost. Monitors are placed at a safe distance from the protected area along the deck, with two monitors on the poop deck. Number and spacing of the monitors, foam tank capacity and system pressure/capacity is dependant on vessel type and protection area.

OptionsRemotely operated valvesRemote, hydraulic operation of monitors from the central control panel or the bridge

Compliance In accordance with SOLAS and IMO MODU code as well as class requirements

The system is approved by all major classification societies The monitor is type approved by a number of classification societies

Low expansion foamThe low expansion foam is made from protein or synthetic foam concetrates mixed with water and air. When discharged, it forms a stable, heat resistant and secure foam blanket, separating the fire from the air supply and cooling down the area preventing further outbreak. Low expansion foam effectively extinguishes large fires of hydrocarbon, polar solvents or mixtures of both.

The foam concentrate works well with either fresh or sea water.

Foam monitor

Foam testingFoam concentrate supplies used to top up fixed systems should be of the same generic type and come from the same manufacturer as the original one to ensure compatibility. For more information, please contact Wilhelmsen Ships Service Customer Services.

Foam test stations are available in five ports. To request a free of charge foam sample can, please contact your WSS Customer Services. Product no. 530 576496. The sample cans are marked with the five addresses where the testing service is offered, so you can choose where best to send it. Results will be sent to you via email within five days after we receive the sample can.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*1

The Unitor portable foam applicators are a supplement to foam monitors, used to cover sheltered areas not reachable by the monitors. The lightweight applicators are easy to carry and operate, giving greater flexibility in fire fighting on deck and in the engine room.

NoteIt is vital that the foam concentrate used is suited to the cargo onboard. Water alone is ineffective, since the burning liquid will float on it and spread further.


UNITOR PORTABLE FOAM APPLICATORS

FeaturesThe applicator is made of stainless steel and has a self-suction hose, which eliminates the need for an additional proportioner.

Wilhelmsen Technical Solutions offers a complete annual service program for the system, which meets all relevant requirements.

ComplianceMSC.217 (82), Ch. 4, Sec. 3.

Benefits

because the mixer is fitted on the end of the line, assuring less loss of pressure

Ordering information and product number (UFA type Approved by DNV)Foam applicator with valve: 605014, 605022, 740621, 740639Foam applicator with valve/inductor: 605055, 605063, 740662, 740670

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*-

Wilhelmsen Technical Solutions supplies a range of different types of foam concentrates for all kind of purposes with several approvals. Most foam concentrates are available from key ports.

In key ports Wilhelmsen Technical Solutions have foam concentrate specialists available. These specialists can be contacted through our Customer service centres.


UNITOR FIRE FIGHTING FOAM CONCENTRATES

Benefits

Product no. 530 576496

Product no. Description Type Packaging

530 556092 SYNTHETIC UNIREX 3-6% 200 liter per drum

530 592196 SYNTHETIC UNIREX 3-6% 20 liter per can

530 556084 FLUORO-PROTEIN UNIROL 3% 200 liter per drum

530 592204 FLUORO-PROTEIN UNIROL 3% 20 liter per can

530 777691 SYNTHETIC AFFF3% F-25 200 liter per drum

530 777692 SYNTHETIC AFFF3% F-25 20 liter per can





530 772384 SYNTHETIC Hydral 3%(S3) 200 liter per drum

530 772392 SYNTHETIC Hydral 3%(S3) 20 liter per can



Product no. Description Type Packaging

530 778008 SYNTHETIC ALCOHOL RESISTANT Uniral AR 3-3 M 200 liter per drum

530 778009 SYNTHETIC ALCOHOL RESISTANT Uniral AR 3-3 M 20 liter per can

530 777927 SYNTHETIC ALCOHOL RESISTANT APS3%- Moussol 200 liter per drum

530 777688 SYNTHETIC ALCOHOL RESISTANT APS3%- Moussol 20 liter per can

530 764986 FLUORO-PROTEIN ALCOHOL RESISTANT Univex Super 3-6% 200 liter per drum

530 764988 FLUORO-PROTEIN ALCOHOL RESISTANT Univex Super 3-6% 20 liter per can

530 764985 FLUORO-PROTEIN ALCOHOL RESISTANT Univex Super 3-3% 200 liter per drum

530 764987 FLUORO-PROTEIN ALCOHOL RESISTANT Univex Super 3-3% 20 liter per can

Foam products for hydrocarbon fires

Foam products for Polar solvent and Hydrocarbon fires

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'*�


UNITOR LOCAL APPLICATION FIRE FIGHTING SYSTEM

The Unitor Local application fire fighting system is a low pressure water based system ideal for use in high risk machinery spaces. Placed above the area/object, the system effectively protects locations such as main and auxiliary engine tops, fuel oil purifiers, boilers, inert gas generators and incinerator burners.

Fitted with detectors, the system starts immediately in the event of fire. In many cases, immediate release of the local application system is enough to extinguish the fire, making activation of the total flooding system unnecessary.

Applicable toEngine roomsPump rooms Compressor rooms

This system is part of a family of systems for this application, please see High expansion foam, Unitor 1230 and CO2 to compare. The system can be applied to merchant marine and offshore structures.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�4

System descriptionThe system uses low pressure water nozzles installed in single, row or grid pattern depending on the best way to protect the equipment. For optimal performance, low pressure PN16 piping is used.

Separate protected objects or areas have individual dry piping leading from section valves to the nozzles. This ensures that the piping only contains water when the system is in use, lowering maintenance needs.

The valves can be remotely operated from a central control panel, and from manual release boxes near the protected area. For extra quick release, automatic detection and release function can be added. Since the system uses water as the extinguishing agent, it can be released immediately with no risk to personell. This gives the crew

Technical data Nozzles

Type full-jet

Material brass

Water capacity @4bar (l/min) 8.5/36

Pump

Type centrifugal multistage

Material

Voltage/ frequency (V/Hz)

Insulation and enclosure

stainless steel

3x400/50 and 3x440/60

Class F, IP 55


Features Effectively suppresses fire by isolation the oxygen and

reducing temperature by evaporation Improved efficiency nozzles use less water, and require

smaller dimensions on all system components Automatic and manual release options Low pressure PN16 dry piping between protected areas Low pressure system, smaller dimensions on pumps and

piping, and smaller maintenance cost than high pressure systems

Benefits Safe for both crew and the environment Safe to activate immediately even in manned areas Both fresh and sea water can be used Skid mounted solutions available for easy installation Minimal maintenance required, low maintenance cost Easy and cost efficient operation

time to evacuate while activation of the total flooding system is considered. Often, immediate activation of the local application system is enough to stop the fire completely.

The system is build up by three main groups of components; the sector valve register, distribution piping with nozzles and control panels

The sector valve register contains distribution valves corresponding to the different protected installations. The valves can be operated remotely from the main control panel or from the manual release boxes close to the protected object/area.

The distribution piping with nozzles; from each distribution valve, the piping leads to the nozzle spread out in a grid pattern above each protected object/area.

The system can be operated centrally from a main control panel and also from manual release boxes close to the protected object/area.

InstallationModular skid based units makes installation easy and the footprint small

Compliance SOLAS requirements and approved by major classification societies (AICS)

Extensively independently tested according to IMO MSC/Circ. 913 and Circ. 668

Nozzle approved by Marine Equipment Directive (MED)

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�*


UNITOR SAMPLE EXTRACTION SMOKE DETECTION SYSTEM

The Unitor sample extraction smoke detection system provides early detection of fires in cargo holds, by continuous smoke monitoring in up to 48 cargo holds simultaneously. Air samples are drawn from the cargo holds via already existing piping and automatically monitored for smoke contamination. To minimise installation costs, the smoke detection system normally uses the same pipe work as the CO2 fire extinguishing system.

Applicable toDry cargo holds

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'��

Technical data Smoke detection panel

SDS-0 smoke detection panel without built-in detection lines

SDS-4 smoke detection panel with 1–4 detection lines

SDS-8 smoke detection panel with 5–8 detection lines

SDS- smoke detection panel with 9–12 detection lines

Enclosure type IP66Enclosure type IP66

Features Automatic air sampling and monitoring of up to 48 cargo holds simultaneously

Utilises existing CO2 pipework Completely automated and self-adjusting Explosion protected to IEC79 and EN 50 020 Fans switch automatically every 24 hours to give even load on motors

Benefits Repeater panels allow for monitoring from key locations onboard

One button control for simple testing and resetting Cost efficient compact and modular design

Repeater panel

SDS-R48/G repeater panel for wall mounting

SDS-48/P repeater panel for console mounting

Enclosure type IP65

Fan unit

S SDS-M0440 Fan Unit for 220/230V 50/60Hz, 370W@50Hz, 440W@60Hz

SDS-M044 Fan Unit for 110V 60Hz, 440W

Enclosure type IP54


Compliance SOLAS chapter II -2 FSS code chapter 10 MSC292 Explosion protected to IEC 79 and EN 50 020

Extension panel

SDS-E4 extension panel for a maximum of 4 additional detection lines

SDS-E8 extension panel for 5–8 additional detection lines



Enclosure type IP66

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�2

Applicable toChemical and product tankersLPG and LNG tankersSupply vesselsOffshore installations and mobile unitsReefer ships


UNITOR - GENERON NITROGEN MEMBRANE INERT GAS SYSTEM

The Unitor-Generon Nitrogen membrane inert gas system utilises hollow fibre technology to achieve nitrogen purity levels from 95% to 99.9% The hollow fibre membrane modules are incorporated with other components to provide a nitrogen generator system which ensures an effective, reliable, safe and cost saving solution to protect your vessel and its cargo.

Ideal for vessels that require a clean, dry inert gas for maintaining a non-explosive athmosphere in cargo tanks, for preservation of cargo quality and on LNGC to prevent icing damage on the insulation.

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'��

Technical data

Compressors

Type oil flooded screw compressors

Control method modulating control

Pressure 13-14 bar

Cooling air, fresh or sea water cooled

Power consumption starting from 27kW per 100 Nm3/h@95% N2

Starting method star/ delta


Features Advanced high quality fibre technology ensures the highest nitrogen purities ranging between 95-99.9%

The system requires 10-40% less compressed air, in combination with long life membrane modules, and low maintenance requirements, this gives significant operational savings

Range from small topping-up generators to large total inert gas systems

Full range of standardised components give flexible customisation to each vessel’s needs

Digital information on all key values, such as temperature, purity and pressure control

Benefits Smaller compressor gives lower energy consumption Silent, unattended operation Cost efficient operation Well-known and tested technology Fewer moving parts gives low maintenance cost Small footprint

N2 Generators

Standard cabinets up to 500 Nm3 /h@95%

Standard open skid design up to 2800 Nm3 /h@95%

Custom made solutions available

Process controlled PLC

Ambient temperature 3°C - 45°C

Pressure 6-14 bar

Air temperature 45°CAir temperature 45°C

Product specification

Capacity 10 -4500 Nm3

Purity 95-99.9%

Dew point -70°C

Pressure approx 12 bar

Temperature approx 50°C

Oil content in product less than 10ppb

Particles in product max 0.01 micronParticles in product max 0.01 micron

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'�+System descriptionBy filling the voids in the cargo holds with nitrogen, oxygen levels are lowered below 8%, creating a non.flammable athmosphere. Nitrogen is very efficient and the only common inerting gas that does not contaminate the cargo.

The nitrogen generator system works by separating air into its component gases by passing compressed air through a bundle of hollow fibre, semi-permeable membranes. The membranes separate nitrogen from oxygen, CO2 and other trace gases. Once the trace gases are diverted, the resulting Nitrogen has a purity between 95%-99.9%.

Depending on the application, the nitrogen can be delivered directly to the protected space or stored in a receiver tank. If the system is fitted with a high pressure booster compressor, it is possible to recharge nitrogen cylinders as well.

To ensure high purity nitrogen production over time, the Unitor - Generon Membrane inert gas system treats the feed air to the highest quality with minimal water, oil and particle content. This keeps the membranes in good condition and maintenance costs down.

Simple automated operation PLC control of nitrogen generator parameters provides easy operation and inspection, whilst automatically monitoring product purity. Auto-ventilation prevents off-spec gas from being delivered to the rocess.

InstallationCompact, modular system comes fully assembled on skids making installation easy and cost efficientIndoor, outdoor or containerised installation location

ServiceSpare parts, system inspections and after sales services are delivered worldwide.

For all your nitrogen service, spare parts or technical service requirements, please email us [email protected]

�� 1�� !" "# ��, �,�� %��& �'��1�&��$�(��)�'��

ChinaBldg 11, NO. 128 Dieqiao Road, Pudong Kang Qiao Industrial Zone, Shanghai 201319, [email protected]

Phone: (+86) 21 61183000Fax: (+86) 21 61183001

Korea RM307, March Building, 718-4, Maehak-Ri,Jeonggwan-Myeon,Gijang-Gun, Busan, Korea (619-963)[email protected]

Phone: (+82 51) 7207912Fax: (+82 51) 7287100

Japan2-63 Nishihama-cho, Imazu, Nishinomiya-city, Hyogo Prefecture 663-8225, Japan [email protected]

Phone: (+81 798) 355180Fax: (+81 798) 356173

Singapore31 International Business Park#05-10 Creative Resource Singapore [email protected]

Phone: (+65) 6450 9191Fax: (+65) 6863 8863

Customer ServiceStobno 74, 72-002 [email protected]

Phone: (+48) 91 46 48 900 Fax: (+45) 91 46 48 901

North America4130 SW 28th WayFt. LauderdaleFL [email protected]

Phone: +1 (954) 585-5800 Fax: +1 (954) 585-5896

South AmericaBua Bispo Lacerda Nos 61/67Del Castilho, Rio de [email protected]

Phone: +55 (21) 2582 8000Fax: +55 (21) 2252 8011

CONTACT WILHELMSEN TECHNICAL SOLUTIONSWe provide consultative services, engineering, layout, installation and commissioning for newbuilds and retrofits worldwide. Our flying squads are available 24/7.

Listed below are our main locations for safety systems, please contact the one most convenient to you.

Nitrogen service For all your nitrogen service, spare parts or technical service requirements, please email us at [email protected]

ASIA

AMERICAS

EUROPE, MIDDLE EAST AND AFRICA

�� !" "# 58 %��& �'��&��$�(��)�'*

�� !" "# 58 %��& �'��&��$�(��)�'�

MARITIME LOGISTICS

GLOBAL LOGISTICS SOLUTIONS

Wilhelmsen Ships Service offers global logistics solutions to the maritime industry through a unique network of service agents and suppliers.

We offer a wide range of logistics services, all designed to offer flexible, cost-effective solutions. Customers can select project-related or long-term activities, all of which combine our experience and a dedicated focus on quality in order to assist vessel operators in increasing operational efficiencies.

(consulting, planning, cargo handling and management of operations)

(sea-/land-/air-freight)

�� -4�� !" "# �. %��& �'��-4&��$�(��)�'*

�� -4�� !" "# �. %��& �'��-4&��$�(��)�'�

SHIPS AGENCY

SHIPS AGENCY SERVICES

The shipping industry never stays still. With constantly changing regulation, compliancy issues and increased operational costs, for some companies, dealing with different agents across global routes can lead to time-consuming administration and uncertainty over levels of service and performance.

Wilhelmsen Ships Service has set out to change the way that the traditional ships agency operates, offering a complete portfolio of services that encompass full agency, protective agency and husbandry, all designed to enable vessels to go in and out of port as efficiently as possible. At WSS we believe that by managing multiple port calls in a predictable and structured manner, we can simplify your workload and give you peace of mind.

We also believe that this way of working can reduce operational and administrative costs and we have shaped our business to cater for this, resulting in a new approach to ships agency in the form of Ships Agency Service Agreements.

SHIPS AGENCY

SHIPS AGENCY SERVICES

Full Agency Service

Pre-planning is the key to a successful port call. With this in

mind, WSS has clearly defined its global services. As your

local port representative we ensure that all efforts are made

in order to make every port call as efficient as possible. A

global management system is supported by a web-based

operational system to ensure proper follow up of vessels

activities around the globe, before, during, and after the port

of call. With proven and quality assured operational

procedures, we guarantee standardised operational delivery

of agency services around the world.

Protective Agency Service

With any number of stakeholders involved in a port call, it is

natural that occasionally, conflicts of interest may arise. As

protective agents, we ensure that your interests are well

taken care of. We warrant that local agent provide the

services as per your requirements and your value, and we

ensure that these agency services are provided with total

transparency, protecting your interests at all times.

Husbandry Service

A good husbandry service ensures that while a vessel is in

port, passing, or at anchorage, various elements are

coordinated in line with vessel requirements. Our long

established presence, and our dedicated and experience

staff ensure that services rendered to the vessel and its crew

are delivered in a timely manner in order to make stopovers

cost effective and reduce turnaround time wherever

possible.

Ships Agency Redefined

WSS’s global Ships Agency Re-Defined (SARD) service is

revolutionary in that it allows owners to integrate all of their

ships agency requirements through a single point of contact

and through unlimited access to the WSS global network,

which provides local support at more than 2200 sites

around the world.

Key features of the service include a single bank account for

pre-funding and balance settlements for all port calls

worldwide and a dedicated portal for WSS operational

software solutions that provides owners with online real-time

access to their port calls worldwide.

Service Agreements

WSS’s Service Agreements are designed to streamline and

simplify multiple port-call operations whilst ensuring that the

needs of the customer are always met. With the largest

global network of offices of any ships agency company, and

150 years of experience and competence, our customers

benefit from our unique approach to the way multiple port

calls are handled.

WSS Service Agreements include:

One Global Agent - improved communication flow with a

single dedicated expert, coordinating any number of port

calls around the world, located in your time zone and

speaking your language.

Predictable Pricing - our ships agency services have a

predictable and transparent pricing structure, with no

surprises.

Standardised quality services - Operational needs and

requirements are incorporated within our global processes

and subsequently monitored and audited to ensure that

services rendered are delivered to your satisfaction.

Electronic Disbursement Accounts - easy access to job

information with operational details and electronic disburse-

ment accounts available at an online portal.

One Bank Account - safe and efficient cash transactions

with one bank account for all your port calls worldwide.

CoverageWSS’s trusted global network is unrivalled in its coverage, with 4,500 marine professionals servicing 2,400 ports in 125

countries. In 2011, we made product deliveries to 24 000 vessels and handled 54 000 port calls. Through our Ships Agency

Re-Defined (SARD) offer, our customers are guaranteed one singular main point of contact, coupled with local knowledge

and service, wherever in the world their vessels are.

History WSS’s has over 150 years’ experience in ships agency and works closely with customers, agents and port state authorities

all over the world to guarantee a seamless, efficient, cost-effective service.

Service CapabilitiesWSS offers the following Ships Agency services:

856

SHIPS AGENCY

Please visit the Network Directory on our website for a complete list of ships agency contact details per country and port:

wilhelmsen.com/shipsservice

857

1. Range of application

These Conditions apply to all sales of goods (including gases) and the supply of gas cylinders from Wilhelmsen Ships Service AS (a company within the Wilh. Wilhelmsen ASA Group of Companies that owns the trademarks “Wilhelmsen Maritime Services”, “Barwil” and “Unitor”), its subsidiaries and author-ised distributors (the “Company”).

A customer placing an order with the Company (the “Cus-tomer“), or the acceptance by the Customer of the goods and/or gas cylinders delivered by the Company, whichever occurs first, shall constitute the Customer’s acceptance of these Conditions and the express exclusion of the Customer’s condi-tions of purchase.

All sales of goods and supplies of gas cylinders are deemed to be made to the vessel to which the goods and gas cylinders are delivered or are to be delivered, and for and on behalf of the vessel, its master, its owners and such other party or parties who has or have placed the order and/or accepted the goods and/or the gas cylinders, and all contracts shall be deemed to be concluded with the master of the vessel, the owners of the vessel and such other party or parties as described herein.

If an order is placed by a Customer as agent for a principal (disclosed or undisclosed), then such Customer shall be liable jointly and severally with such principal for the payment of all amounts due and the performance of all obligations under these Conditions.

2. Order confirmation

If a Customer does not without undue delay after receipt of an order confirmation notify the Company in writing of any inac-curacies, the order confirmation is considered to be expressly agreed between the parties. The Company is not responsible for obvious errors and deficiencies in an order confirmation.

3. Price and payment for goods – deposit and fees for gas cylinders

The purchase price for the goods sold is stipulated in accord-ance with the Company’s price list in force at the time and place of delivery.

For gas cylinders supplied by the Company, the Customer shall pay a deposit and associated fees in accordance with the Company’s price list in force at the time and place of delivery. The gas cylinders shall be returned to any one of the Com-pany’s depots. Subject to Conditions 4 and 7, the deposit shall then be refunded in accordance with the terms of the cylinder agreement in effect.

The Company shall not be responsible for any tax, duty, levy, import/export charges, environmental fees or other charges of any kind imposed by the state or state authority where the goods and gas cylinders are delivered, by reason of the delivery of the products to the Customer (other than tax on the Company’s overall net income) and which should be paid by the Customer. The Customer shall fully reimburse the Company in respect of any claims or expenses incurred in connection with such taxes and charges, such amount to be added on the Company’s invoice.

The Customer shall pay the purchase price, the deposit and any other amount due in full, free of bank charges, as specified in the invoice at the latest within 30 days from the invoice date. The Company shall be entitled to claim interest of 2% per month (before as well as after judgement) on any overdue payment from the due date until payment in full is received by the Company. If payment is overdue, the Company is entitled to claim and recover full compensation for collection costs and expenses in and out of court and all legal costs and expenses on a full indemnity basis.

4. Equal exchange of gas cylinders

If the Customer orders supply of gas, the Company shall sup-ply to the Customer a filled Unitor gas cylinder against receipt of an empty Unitor gas cylinder of the same kind. In such cases the deposit paid by the Customer shall not be refunded and a supplementary deposit may be charged or credited to reflect the Company’s price list in effect at the time and the price and payment terms stated in the applicable cylinder agreement.

5. Delivery

The goods and gas cylinders shall be delivered at the time and date agreed upon between the parties. For destinations,

places or ports requested, which are not listed in the Com-pany’s port index (http://www.wilhelmsen.com/SERVICES/MARITIME/COMPANIES/BUSS/Pages/buss.aspx), deliveries are made EXW (ICC Incoterms 2000).

For destinations, places or ports requested, which are listed in the Company’s Port Index (but not being a Free Delivery Port), deliveries are made FCA to the Company ’s warehouse (ICC Incoterms 2000), transportation costs to Customer will be charged to the Customer subject to quotation.

For Free Delivery Ports listed in the Company’s price list, deliveries directly to the vessels are made FAS (ICC Incoterms 2000) and deliveries to places other than alongside the ship are made FCA (ICC Incoterms 2000), unless otherwise stated in the Company’s order confirmation. If the parties initially have agreed on delivery FAS (ICC Incoterms 2000) and the Com-pany is subsequently instructed for whatever reason to deliver the goods at a place other than alongside the ship, the delivery conditions are altered to FCA (ICC Incoterms 2000) at the new place, except as provided below.

For all ports, even if listed as a Free Delivery Port in the Com-pany’s price list, the Company’s costs and expenses related to the following additional services will be charged at cost:

the place of delivery.

Any applicable delivery costs and expenses shall be advised by the Company in quotations and order confirmations. Overtime and waiting time of more than 60 minutes will be charged to the Customer for deliveries at ports not listed as a Free Delivery Port in the Company’s price list. The Company’s normal opening hours at all places of delivery are listed at the Company’s network directory.

If the Customer is obliged to pay the purchase price or deposit before or at the delivery, and payment has not been made, or the Customer has failed to pay any other amount due and pay-able to the Company, the Company is not obliged to hand over the goods or the gas cylinders or otherwise transfer control over the goods or the gas cylinders without simultaneous pay-ment of all overdue amounts.

6. Properties of goods and gas cylinders

The goods and gas cylinders shall be in conformity with infor-mation given in the Company’s product guide as effective from time to time (http://www.wilhelmsen.com/services/maritime/companies/buss/products/Pages/default.aspx). The Company reserves the right to amend its product guide and the product specifications at any time without notice. The Company may in its sole discretion provide goods not listed in the Company’s product guide.

7. Title to gas cylinders

The Company shall retain ownership and title to the Unitor gas cylinder while it is in the Customer’s possession. The Company’s gas cylinders delivered to and from the Customer will be registered and updated by the Company’s electronic tracking system. The Customer will receive a user ID and password to the Company’s cylinder web page where the Customer will have access to monitor such cylinders on board all of the Customer’s ships.

The Company will charge its Customers a deposit fee to ensure correct return of the Company’s gas cylinders, as per Conditions 3 and 4.

The Customer may, without prior notice to, additional payment to, or approval from the Company, assume title to any Unitor gas cylinder in its possession and transfer title to such cylinder to any third party, provided always that the Customer complies with the provisions of paragraph 4 of this Condition 7. In case the Customer (i) destroys or damages, (ii) defaces, (iii) loses, (iv) delivers the Unitor gas cylinder to a third party not authorised by the Company or (v) does not return the Unitor gas cylinder to the Company’s possession, control and test/maintenance system within a period of 18 months from receipt of delivery from the Company (or the Company’s authorised third party), the Company’s ownership to the gas cylinder shall cease immediately.

When the Company’s ownership to a gas cylinder ceases in such events as stated in paragraph 3 of this Condition 7, any obligation or liability on the Company with regard to the gas cylinder shall terminate immediately, and the Customer shall remove the Unitor trade name from the cylinder and immediately inform the Company in writing about the actions

taken. Any deposit fee paid by the Customer for that relevant gas cylinder will not be refunded and may be retained by the Company. If no deposit fee is previously paid, the Company will charge the Customer with a further fee equal to the deposit fee according to the Company’s price list in effect at the time the Customer informs the Company.

In case the Customer returns to the Company a Unitor gas cylinder not registered to be in the Customer’s possession, the Customer will not be entitled to refund of any deposit fee paid by another customer for such gas cylinder.

8. Risk/Retention of title

The goods (including gases) and the supplied gas cylinders are at the risk of the Customer from the time of delivery. The ownership and title to the purchased goods (not gas cylinders, see Condition 7) passes to the Customer when the Company has received payment in full of the purchase price, including interest and costs where applicable.

If the Company has not received payment for the goods, the gases or the deposit for the gas cylinders within 30 days from the invoice date, the Company shall, without any court order or other process of law, have the right to retake possession of the goods, the gases and the gas cylinders wherever they are located. The Customer hereby grants the Company permission to enter onto any of its vessels, property or premises or those of any of its subsidiaries or affiliates in order to retake posses-sion of such goods, gases and gas cylinders. The Customer is obliged to assist the Company in retaking possession. The Company is entitled to claim and recover full compensation for all costs and expenses in and out of court and all legal costs and other expenses incurred by the Company in retaking possession.

9. Delay

Subject to the provisions in Condition 11 (including, without limitation, Force Majeure), if the delivery of the goods or gas cylinders are delayed, and this is not due to the Customer or circumstances on its part, the Customer may cancel the order if and when the delay constitutes a fundamental breach and the Company thereafter has been given the opportunity to deliver the goods or gas cylinders within reasonable time.

The Customer loses any right to cancel the order if a claim for cancellation is not submitted to the Company in writing within three days from the agreed delivery date.

Except as provided by this Condition 9, the Customer shall have no further rights or claims whatsoever in respect of any delay in delivery on the part of the Company.

10. Lack of conformity

Subject to the provisions in Condition 11, in the event of lack of conformity of the supplied goods or gas cylinders with the order confirmation at the time of delivery which is not due to the Customer or circumstances on its part, the Company shall at its sole discretion rectify the lack of conformity, deliver substitute goods or gas cylinders or reduce the purchase price of the goods proportionally to the lack of conformity.

The Customer loses any claim based on lack of conformity where such lack of conformity would have been discovered on reasonable inspection at the time of delivery, or if the Customer does not make a claim in writing to the Company as soon as the lack of conformity should have been discovered. In any event the Customer loses its claim based on the lack of con-formity if it does not submit a claim in writing to the Company within 30 days after the delivery of the relevant goods or gas cylinders.

Except as provided by this Condition 10, the Customer shall have no further rights or claims in respect of lack of conformity on the part of the Company.

11. Limitation of liability

11.1 Entire financial liability

Subject to Condition 9 and Condition 10, the following provi-sions set out the entire financial liability of the Company (in-cluding any liability for the acts or omissions of its employees, agents and sub-contractors) to the Customer in respect of (i) any breach of any contract to which these Conditions apply, (ii) any use made or resale by the Customer of any of the goods, or of any product incorporating any of the goods and (iii) any representation, statement or tortious act or omission including negligence arising under or in connection with any contract to which these Conditions apply.

WILHELMSEN SHIP SERVICE TERMS AND CONDITIONS FOR SALE OF GOODS AND SUPPLY OF GAS CYLINDERS

Revised December 2010

858

11.2 Exclusion of implied warranties, conditions and terms

All warranties, conditions and other terms implied by statute or common law are, to the fullest extent permitted by law, excluded from any contract to which these Conditions apply.

11.3 Liabilities not excluded or limited

Nothing in these Conditions excludes or limits the liability of the Company (i) for death or personal injury caused by the Com-pany’s negligence or (ii) for any matter which it would be illegal for the Company to exclude or attempt to exclude its liability or (iii) for fraud or fraudulent misrepresentation.

11.4 Indirect loss - cap

Subject to condition 11.2 and condition 11.3, (i) the Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the performance or contemplated performance of any contract to which these Conditions apply shall be limited to the contract price received by the Company and (ii) the Company shall not be liable to the Customer for loss of profit, loss of business, or depletion of goodwill in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or in connection with any contract to which these Conditions apply.

11.5 Customer’s specifications and installations

For products ordered and specified by the Customer, not forming part of the Company’s product guide, (cf Condition 6), the Company assumes no liability whatsoever, and disclaims any express or implied warranty relating to sale and/or use of such product, including liability or warranties relating to func-tional ability for a specific application/use, merchantability, or infringement of any patent, copyright, or any other intellectual property right. The Company shall in no event be liable for any damage to products manufactured, assembled or installed by the Customer of which the goods sold hereunder form a part.

11.6 Transfer of title to gas cylinders

The Company shall under no circumstance be liable for any loss or damage whatsoever and howsoever arising in relation to, or in any way connected with any cylinder if transfer of title as referred to in Condition 7 has taken place.

11.7 Force Majeure

If the Company is unable to make delivery or to make delivery within the agreed delivery time, owing to Force Majeure, or events beyond the reasonable control of the Company or events that could not be reasonably foreseen by the Company when the order was placed or the order confirmation was is-sued, the Company’s obligation to deliver shall cease or, if ap-propriate, be suspended for the duration of such obstructions. The Company’s obligation shall also cease or be suspended in the event of delay due to security arrangements, incidents or other similar event in the port whether or not the delay could be considered within the Company’s reasonable control or to be reasonably foreseeable by the Company. Force Majeure means any industrial disputes, riots, mobs, fires, floods, wars, embargo, shortage of labour, power, fuel, lack of means of transportation or general lack of other necessities, regulations or orders from any governmental agency, port or ship security control or any other circumstances beyond the control of the parties. The Company is in no event liable for loss or damage resulting from delay due to any of the circumstances men-tioned in this Condition 11.7.

12. Indemnification

The Customer shall comply with all warnings, instructions and safety rules provided to it by the Company from time to time and shall acquaint itself with and apply best industry practice at all times in relation to the storage, handling and use of all goods and gas cylinders.

The Customer acknowledges that the goods sold and the gas cylinders supplied under these Conditions are, or may be, hazardous to human health, and the Customer assumes all risk and liability for the use of the goods and gas cylinders. The Customer shall familiarise itself and keep itself informed with respect to possible hazards to persons or property involved in the handling and use of the goods and gas cylinders. The Customer shall advise its employees, independent contractors and others who handle the goods and gas cylinders for the

Customer, and shall take such action as is reasonably necessary to advise others, who are foreseeably users of the goods or gas cylinders of the suspected or proven hazards of the goods and gas cylinders and the proper handling of the goods and gas cyl-inders. The Customer assumes all risk and liability for the proper use and handling of the goods and gas cylinders after delivery and shall indemnify the Company and hold the Company harm-less from all consequences including but not limited to all liability, costs and expenses whatsoever arising from improper use or improper handling, including claims by third parties.

13. Intellectual property rights

The Company shall retain ownership to any and all intellectual property rights in relation to the goods and cylinders supplied under these Conditions. Such intellectual property rights shall include but not be limited to trade marks, patents, copyright, names, styles and designs used in relation to the supplied goods and gas cylinders (whether or not registered or capable of registration), and shall include all goodwill associated there-with. The Customer shall not be granted any rights from the use of the Company’s intellectual property rights.

14. Ethical standards

14.1 Compliance

The parties agree that neither party shall:

(a) offer or agree to give any person working for or engaged by the other party any gift or other consideration, which could act as an inducement or a reward for any act or omission to act in connection with the applicable cylinder agreement or any other agreement between the parties;

(b) enter into a cylinder agreement or any other agreement with the other party if it has knowledge that, in connection with it, any money has been, or will be, paid to any person working for or engaged by the other party or that an agreement has been reached to that effect unless (i) details of any such arrange-ment have been disclosed in writing to the other party prior to the execution of the agreement and (ii) approval of such arrangement by an authorised representative of the other party has been obtained;

(c) offer, pay or promise to pay either directly or indirectly, any-thing of value to a Public Official in connection with a cylinder agreement. The parties further agree that in the performance of their respective obligations under the cylinder agreement, the parties and their respective agents, sub-contractors and employees shall comply with all applicable laws, rules, regula-tions and orders of any applicable jurisdiction, including the OECD Convention on Combating Bribery of Foreign Public Officials in International Business Transactions. The Customer shall notify the Company immediately in writing with full par-ticulars in the event that the Customer receives a request from any Public Official requesting illicit payments; or

(d) take any other action which results in a breach by either party of any applicable anti-corruption legislation.

In this clause 14, the term “Public Official” means (i) any official or employee of any government agency or government-owned or controlled enterprise, (ii) any person performing a public function, (iii) any official or employee of a public international organisation, (iv) any candidate for political office or (v) any political party or an official of a political party.

14.2 Breach of ethical standards

If the Customer or any of its agents, sub-contractors or em-ployees breaches condition 14.1, the Company may terminate the cylinder agreement by written notice with immediate effect. Any termination pursuant to this condition 14.1 shall be without prejudice to any right or remedy that has already accrued, or subsequently accrues, to the Company.

14.3 Determination by Company

Notwithstanding condition 16 (Governing Law - disputes), any dispute relating to:

(a) the interpretation of conditions 14.1 and 14.2; or

(b) the amount or value of any gift, consideration, inducement or reward referred to in condition 14.1,

shall be determined by the Company and such determination shall be final and conclusive.

15. OFAC compliance

Pursuant to the U.S. Department of Treasury, Office of Foreign

Assets Control (“OFAC”) regulations respecting USD pay-ments, the Company cannot facilitate USD payments in any transaction related to OFAC sanctioned entities, either directly or indirectly. As of the effective date of these Conditions, sanctioned entities include the countries of Burma, Cuba, Iran, North Korea, Sudan and Syria, and certain named persons linked to those countries. The Company may be required to request information from the Customer which supports a verification statement which New York intermediary banks may require according to the OFAC regulations, including whether a person is a “specially designated national” listed by OFAC or any executive order, or a “national” of any country with which transactions are regulated by OFAC. The Customer shall provide timely and truthful responses to any such reasonable enquiries the Company may make to support any required verification statements.

16. Governing Law – disputes

These Conditions and all contracts to which these Conditions apply and any non-contractual obligations arising out of or in connection with such contracts shall be governed by, and construed in accordance with, English law.

Any dispute arising out of or in connection with a contract to which these Conditions apply shall be referred to arbitration in London in accordance with the Arbitration Act 1996 or any statutory modification or re-enactment thereof save to the extent necessary to give effect to the provisions of this Condition. The arbitration shall be conducted in accordance with the London Maritime Arbitrators Association (LMAA) Terms current at the time when the arbitration proceedings are commenced. The reference shall be to three arbitrators. A party wishing to refer a dispute to arbitration shall appoint its arbitrator and send notice of such appointment in writing to the other party requiring the other party to appoint its own arbitrator within 14 calendar days of that notice and stating that it will appoint its arbitrator as sole arbitrator unless the other party appoints its own arbitrator and give notice that it has done so within the 14 days specified. If the other party does not appoint its own arbitrator and give notice that it has done so within the 14 days specified, the party referring a dispute to arbitration may, without the requirement of any further prior notice to the other party, appoint its arbitrator as sole arbitrator and shall advise the other party accordingly. The award of a sole arbitrator shall be binding on both parties as if he had been appointed by agreement. Nothing herein shall prevent the parties agreeing in writing to vary these provisions to provide for the appointment of a sole arbitrator. In cases where neither the claim nor any counterclaim exceeds the sum of US$50,000 (or such other sum as the parties may agree) the arbitration shall be conducted in accordance with the LMAA Small Claims Procedure current at the time when the arbitration proceedings are commenced. Nothing stated previously in these Conditions shall preclude the right of the Company to seek security or interim orders (by means of any appropriate remedy or relief, including but not limited to in rem arrests, injunctions, attach-ments, seizures, sales, detention, the exercise of a lien or otherwise howsoever) according to local law and legislation for claims under all contracts to which these Conditions apply in any jurisdiction the Company sees fit.

17. Severability

If any provision of these Conditions or of any contract to which these Conditions apply is or subsequently becomes void, un-enforceable or illegal, that shall not affect the validity, enforce-ability or legality of the other provisions of these Conditions or of any contract to which these Conditions apply.

18. Counterparts

A contract to which these Conditions apply may be executed in any number of counterparts and this has the same effect as if the signatures on the counterparts were on a single copy of such contract.

19. Third party rights

A person who is not a party to a contract to which these Conditions apply has no right under the Contracts (Rights of Third Parties) Act 1999 to enforce or to enjoy the benefit of any term of such contract.

859

Part of Wilhelmsen Maritime Services, a Wilh. Wilhelmsen group company

Wilhelmsen Ships Service

Postal address PO Box 33 N-1324 Lysaker Norway

T (+47) 67584550 F (+47) 67584570 E [email protected]

www.wilhelmsen.com/shipsservice

Visiting address Strandveien 20 N-1366 Lysaker Norway

mARinE PRODUCTsmARinE ChEmiCALssAfETymARiTimE LOGisTiCsshiPs AGEnCy

OPTimisinG PERfORmAnCE

Wilhelmsen Ships Service is part of Wilhelmsen Maritime Services, a Wilh. Wilhelmsen group company. It has the world’s largest maritime services network, with 4,500 marine professionals servicing 2,400 ports in 125 countries. Wilhelmsen Ships Service supplies safety products and services, Unitor products, Unitor and Nalfleet marine chemicals, maritime logistics and ships agency to the maritime industry. In 2011 the company made product deliveries to 24,000 vessels and handled 54,000 port calls.

ID N

o: 8

1221

2. P

rinte

r: E

rik T

anch

e N

ilsse

n -

Nor

way

. 11.

12. 1

2K. C

ount

ry o

f orig

in N

orw

ay.

Date post:	26-Dec-2014
Category:	Documents
Upload:	metallourgos
View:	1,552 times
Download:	39 times

WSS_ProdCat_2013_lowres_final_v2

Documents