+ All Categories
Home > Documents > XFENCE DEER SPECIFICATION SHEET - McVeigh Parker

XFENCE DEER SPECIFICATION SHEET - McVeigh Parker

Date post: 21-Oct-2021
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
2
• One piece uncut vertical wire • Acts like its own intermediate, provides real strength & rigidity to the fence, almost self supporting • Makes installation quicker • Manufactured from highest quality primary metals • 95% Zinc 5% Aluminium • XTRALIFE coating 24% stronger knot • Smooth animal friendly abrasive free design forged X knot • Tension curves absorb any pressure from climatic change or livestock pressure. Reduce by 50% for visible tensioning • 450mm Pre-stripped ends, speeds up tying off time XTRALIFE Heavy Galv • Xtralife coating makes the wire more ductile, easier to work • Resists cracking when tying off, unlike some heavy galvanised wire XFENCE DEER SPECIFICATION SHEET www.mcveighparker.com 03330 050115 CONTACT US FOR MORE INFORMATION V No. 0.1 - 07/20 Deer fencing, when properly planned for, constructed and maintained, can be an effective way of controlling deer and allowing different land uses to coexist in close proximity. It also helps to protect public safety. • Containment: use heavy gauge only • Exclusion: use heavy or light Benefits • Superior alu/zinc coated wire, lasts 3-4 longer than galvanised wire. • Premium primary wires only used in Xfence fabricated netting • Consistent superior high tensile strength wires only • Greater rigidity due to the one-piece vertical wires • Smoother and safer non-abrasive forged X knot Proven in the field since its conception in 2007 • Easier to install, almost self-supporting • Save on both labour and posts • Longer maintenance free life • Guaranteed to last • Made in New Zealand by the specialists in high tensile fencing • Distributed nationally by the UK’s leading fencing supplier. Real return on your investment, not all wire is the same, why gamble? Deer Farmer Matt Smith Testimonial www.youtube.com/watch?v=cNm0cazHHYY
Transcript

• One piece uncut vertical wire• Acts like its own intermediate,

provides real strength & rigidity to the fence, almost self supporting

• Makes installation quicker

• Manufactured from highest quality primary metals

• 95% Zinc 5% Aluminium• XTRALIFE coating 24%

stronger knot • Smooth animal friendly

abrasive free design forged X knot

• Tension curves absorb any pressure from climatic change or livestock pressure. Reduce by 50% for visible tensioning

• 450mm Pre-stripped ends, speeds up tying off time

XTRALIFE Heavy Galv

• Xtralife coating makes the wire more ductile, easier to work

• Resists cracking when tying off, unlike some heavy galvanised wire

XFENCE DEERSPECIFICATION SHEET

www.mcveighparker.com 03330 050115CONTACT US FOR MORE INFORMATIONV No. 0.1 - 07/20

Deer fencing, when properly planned for, constructed and maintained, can be an effective way of controlling deer and allowing different land uses to coexist in close proximity. It also helps to protect public safety.

• Containment: use heavy gauge only• Exclusion: use heavy or light

Benefits• Superior alu/zinc coated wire, lasts 3-4 longer than galvanised wire.• Premium primary wires only used in Xfence fabricated netting• Consistent superior high tensile strength wires only• Greater rigidity due to the one-piece vertical wires• Smoother and safer non-abrasive forged X knot• Proven in the field since its conception in 2007• Easier to install, almost self-supporting• Save on both labour and posts• Longer maintenance free life• Guaranteed to last• Made in New Zealand by the specialists in high tensile fencing• Distributed nationally by the UK’s leading fencing supplier.

Real return on your investment, not all wire is the same, why gamble?

Deer Farmer Matt Smith Testimonialwww.youtube.com/watch?v=cNm0cazHHYY

Specification Horizontal Wires Vertical Spacings Height Roll Lengths Code

(cm) (cm) (m)

Deer

XHT13-190-15 13 15 190 100m F2440

200m F2442

XHT17-190-15 17 15 190 100m F2441

XLHT13-190-15 13 15 190 50m F2441

XHT17-190-15

www.mcveighparker.com 03330 050115CONTACT US FOR MORE INFORMATIONV No. 0.1 - 07/20

15 15(cm)

7.6cm

7.6cm

7.6cm

7.6cm

7.6cm

7.6cm

7.6cm

10.1cm

12.7cm

12.7cm

15.2cm

15.2cm

15.2cm

17.7cm

20.3cm

20.3cm

XHT13-190-15

7.6cm

10.1cm

12.7cm

12.7cm

15.2cm

15.2cm

17.7cm

17.7cm

17.7cm

17.7cm

22.8cm

22.8cm

15 15(cm)

Not compatible with Clipex but can be used with line wire system, especially useful when installing a fence line that needs to be trenched in or has a closer mesh pattern

(Light)

(Heavy)

(Heavy)

(Heavy)

Light & Heavy Available Heavy

‘‘ORIGIORIGINNALAL’’XFENCEXFENCE

THETHE

McVeigh Parker are able to manufacture bespoke sizes and a site visit can be arranged if required. (Min. 2000m)

XLHT13-190-15 : Not recommended for deer containment


Recommended