Date post: | 12-Oct-2015 |
Category: |
Documents |
Upload: | mark-kuloba |
View: | 79 times |
Download: | 5 times |
of 15
note
note
note
noteTransmission Data
note(transmited when it is unavailable)
noteMIDI active sensing
noteThis message usually requests transmission every 80msec (except for the period of transmitting/receiving the bulk dump).
noteParameter change
noteBulk data of 1 voice
noteBulk data of 32 voices
notecommon Voice
note(add 155th byte and make the 2's complement)
note(add 4096th byte and make the 2's complement)
note(v : ignored)
note(add 94th byte and make the complement on 2)
noteMIDI active clock
noteBulk data of 1 voice
noteBulk data of 32 voices
noteParameter change
noteReception Data
note(ignored)
note
noteignored
noteignored
note(LS 4 bit are ignored.)
noteThis message can be received when the channel number of reception data accords with the channel number of the DX7.
noteThis message usually requests reception regardless of MIDI channel number. When this clock is suspended longer than 666 msec (except for receiving the bulk data), the on-going sound turned OFF.
noteThis message requests reception with the same format as transmission when MIDI channel numbers are corresponded, system information is available, and Memory protect is off.
noteThis message requests reception with the same format as transmission when MIDI channel numbers are corresponded, system information is available, and Memory protect is off.
noteVoice parameter and function parameter request reception with the same format as transmission when MIDI channel numbers are corresponded, system information is available, and Memory protect is off.
noteThis message requests the performance data of the DX1 A-side.