1 Handcrafted in the USA mustangseats.com Yamaha Road Star 1600 ‘99-03 & 1700 ’04-15 - Tank Bib Installation of Mustang tank bib: 1. Remove the seat from the motorcycle, and remove the three screws mounting the dash to the tank. 2. Lift dash just high enough to slip the cutout of the bib over the mounting boss on the tank. 3. Re‐install the dash. 4. Clip the plastic U‐clip (sewn to the bottom of the bib) onto the tank flange. 5. Re‐install seat. Note: This bib fits Road Star models except the Road Star Warrior 2002‐2005.
Transcript
12 800‐243‐1392 413‐668‐1100 Handcrafted in the USA mustangseats.com
Enjoy the custom look of your new Mustang tank bib!
These steps are guidelines to help you install your new Mustang product. If you need further assistance, please call us at 800‐243‐1392 or 413‐668‐1100, Monday through Friday 9:00 ‐ 5:30 Eastern or send an e‐mail to [email protected] or visit our website at www.mustangseats.com. For care and maintenance of our seats, please go to our website under "Support". Refers to part numbers: 93151, 93152, 93336, 93337
Yamaha Road Star 1600 ‘99-03 & 1700 ’04-15 - Tank Bib
Installation of Mustang tank bib: 1. Remove the seat from the motorcycle, and remove the three screws mounting the dash to the tank. 2. Lift dash just high enough to slip the cutout of the bib over the mounting boss on the tank. 3. Re‐install the dash. 4. Clip the plastic U‐clip (sewn to the bottom of the bib) onto the tank flange. 5. Re‐install seat.
Note: This bib fits Road Star models except the Road Star Warrior 2002‐2005.
12 800‐243‐1392 413‐668‐1100 Handcrafted in the USA mustangseats.com
Enjoy the custom look of your new Mustang tank bib!
These steps are guidelines to help you install your new Mustang product. If you need further assistance, please call us at 800‐243‐1392 or 413‐668‐1100, Monday through Friday 9:00 ‐ 5:30 Eastern or send an e‐mail to [email protected] or visit our website at www.mustangseats.com. For care and maintenance of our seats, please go to our website under "Support". Refers to part numbers: 93151, 93152, 93336, 93337
Yamaha Road Star 1600 ‘99-03 & 1700 ’04-15 - Tank Bib
Installation of Mustang tank bib: 1. Remove the seat from the motorcycle, and remove the three screws mounting the dash to the tank. 2. Lift dash just high enough to slip the cutout of the bib over the mounting boss on the tank. 3. Re‐install the dash. 4. Clip the plastic U‐clip (sewn to the bottom of the bib) onto the tank flange. 5. Re‐install seat.
Note: This bib fits Road Star models except the Road Star Warrior 2002‐2005.
