7/27/2019 Your Guide to Cl-lightning Protection-jun12-Final

1/3

You work hard to build and maintain your business.

Thats why its important to ensure youre protected

rom all potential losses especially when they are

beyond your control.

A lightning strike can result in damage ranging rom

power surges to fre or even death. Understanding

the risks lightning poses and ollowing the proactive

steps provided in this guide can help you improve

saety measures, reduce costly repairs and protect your

property.

The facts of lightning

Lightning is an electric current, existing within a cloudwhere small bits o ice are bumping into each otheras they swirl around in the air. All these little collisionscreate electrical charges within the cloud, with apositive charge at the top o the cloud and a negativecharge closest to the earth.

Since opposites attract, the negative charge within

the cloud causes a positive charge to build up onthe ground below. The ground's electrical chargeconcentrates around objects that point up, such asbuildings, chimneys, trees, and even people. Thecharge streaming up rom these points eventuallyconnects with the charge reaching down rom thecloud, resulting in a lightning strike. The intenseenergy concentrated in the lightning bolt causes thesurrounding air to ionize creating the boom we callthunder. Its this concentrated energy which candestroy anything that gets in its way.

The ollowing are common types o lightning whichmay cause damage:

Direct StrikeA direct strike happens when lightning attaches toan object directly. The impact generates hundredso thousands o volts and amps causing severedamage such as destroying brickwork, rying wiresor starting fres.

Side FlashAs a lightning bolt travels along an object (conductor),

the high energy ionizes the surrounding air. I anotherobject (metal, tree or masonry material) is close enoughwhen this happens, the lightning may jump the gaprom its conductor to the other object beore reachingthe ground.

Induced Voltage (Nearby Strike)A nearby strike can be very destructive, as a massive

electromagnetic pulse (EMP) is generated when

the lightning energy passes to the ground. EMPs are

particularly damaging to electronic equipment and

operations. An induced lightning surge on overhead

electrical distribution wires can deliver as much as

100,000 volts. Lightning surges can also enter buildingsvia other metal conductors, water lines, telephone

lines, unshielded computer network CAT cable, cable

television cables, etc.

Protect your property

Consider hiring a proessional lightning protectioninstaller* to help protect your property rom lightningdamage.

Note: Some provinces require installers to be licensedand the installation inspected by the Ofce o theFire Marshall while in other provinces electricians

may do installations to standard.

Your installation checklist:

P Lightning Rods (Air Terminals): Install rods on the building structure, bonded

together and tied to the ground.

Your guide to

1 o

Lightning Protection

AvivaCanada.com/risks

7/27/2019 Your Guide to Cl-lightning Protection-jun12-Final

2/3

P Grounding/Bonding

Earth grounds should be made by drivingground rods (minimum o 3.5 metres in length

and 18 mm diameter) into the earth. These provide

a low resistance path to ground i multiple ground

rods are tied together to orm a ring around the

building. In some cases, specifc ground plates may

be used. On bedrock, a horizontal ground radial

system may be the best.

Ensure all electrical and lightning grounding

systems are tied together to orm a single unifed

ground system. This will reduce the potential or

damage due to high dierential voltages which

could develop i the grounding systems are not

connected.

Use copper cable or ribbon as a conductoror grounding systems as copper has the bestelectrical conductivity, corrosion resistance, andthermal/mechanical stability. Note: secure copperto keep it away rom thieves or you could beunprotected!

PBuilding Protection In Ontario, PEI and NB, systems must be installed

by a licensed and insured proessional (which

will protect you i the system ails to perorm asdesigned). In other provinces, a qualifed electricianshould be hired as portions o lightning protectionall under the electrical code as well as the buildingcode.

Wood frame buildings: a purpose built lightningprotection (araday cage) system may be needed.

Masonry buildings: focus on bonding andgrounding, especially or buildings with towersor metal domes (e.g. heritage buildings,churches, mosques)

Modern steel structures: the buildings structural

steel rame is usually part o the groundingsystem but you should review the design withyour architect to ensure there is proper bondingand low earth to ground conductivity.

P Radio TV Telephone Network Protection Connect any cables entering your building

(TV, telephone) to a surge arrestor specifcallydesigned or that service. All service cablesshould enter the building in proximity to theelectrical service entrance and the arrestorsshould be solidly grounded and bonded togetherto the service ground.

All internal wiring should be shielded(e.g. telephone or CAT cable should have anouter metal jacket which can be grounded)or placed inside a grounded metal conduit.

P Fire and Security Alarm Systems Protection Protect alarm systems by ensuring the panel has

surge protection installed by design. As well, allpower leads should incorporate surge protectionand communication cabling. Cabling or sensorsshould be shielded and grounded.

Long term protection

These measures will help keep your property saerom lightning damage. However, you must perorman annual visual inspection o your system, and werecommend to have the system inspected and groundconductivity tested every 5 years at a minimum.

2 o

AvivaCanada.com/risks

7/27/2019 Your Guide to Cl-lightning Protection-jun12-Final

3/3

For urther inormation on this topic, please contact yourindependent insurance broker.

Visit www.avivacanada.com/risks or more Your guideto inormation sheets on other loss control topics.

Readers should seek specifc advice when dealing withparticular situations. Aviva Canada Inc. accepts noresponsibility or action taken as a result o inormationcontained in this publication. The inormation inYour guide to... is correct at the date o going to press.Printed and published by Aviva Canada Inc.,Website: www.avivacanada.com

Copyright, all rights reserved. Aviva and the Avivalogo are trademarks o Aviva plc and used under licenseby Aviva Canada Inc. and its subsidiary companies.

References

CSA Standard CAN/CSA_B72-M87 InstallationGuide or Lightning Protection Systems

NFPA - NFPA 780: Standard For The InstallationOf Lightning Protection Systems 2011

Lightning protection installation companies Dominion Lightning Rod

www.dominionlightningrod.ca

Burchell Lightning Protectionwww.burchelllightning.com

Western Lightning Protectionwww.westernlightningprotection.com

Simpson Lightning Rodswww.lightning-rods.ca

Provincial Legislation Ontario: The Ontario Lightning Rods Act R.S.O.

1990 Chapter L.14 enorced by the Ofce o theOntario Fire Marshall

PEI: The Lightning Rod Act, Chapter L-12 R.S.P.E.I.1974 - enforced by the Chief Electrical Inspector

New Brunswick: The Electrical Installation andInspection Act (O.C. 82-934) under New Brunswickregulation 82-215.

All other provinces: refer to provincial electricalcodes, provincial fre saety regulations, theCanada Building Code, NFPA, and CSA

*Provinces such as Ontario and New Brunswick require installers to conform to standards

set out in CSA Standard CAN/CSA_B72 -M87 - Installation Guide for Lightning Protection

Systems, and provincial legislation also requires installers to be licensed and insured

against liability. Most other provinces and territories simply ollow CSA standard CAN/

CSA-B72-M87. In addition, the National Building code asks for compliance with the CSA

standard in the absence o any applicable provincial legislation.

3 o

AvivaCanada.com/risks