“YOUR ONE STOP SUPPLIER” - birk-blyme.com.au · “YOUR ONE STOP SUPPLIER ... Email:...

“YOUR ONE STOP SUPPLIER”

AuthorisedDistributor for:

Since 1988 Birk & Blyme have been dedicated to thesupply of premium quality consumables, specialised serviceand reliable support to the Printing and Print Finishing Industry.

Our operation carries a comprehensive range of knives andreplacement parts, sourced from only leadingmanufacturers worldwide.

Compare our quality and price for VALUE!

We look forward to servicing your future Spare Parts requirements.

Christian Birk & Jan Blyme

Product Range

Web Press Parts Suction Cups & Discs Slitters, Holders & Anvils Doctor Blade Packaging Knives Wash-Up Blades Sheet Seperators Grippers Brushes Drill Bits Guillotine Knives &

Cutting Sticks

Our New Team MemberMalaysia & Singapore

Christian Birk

Jan Blyme

Leeharne Hawley

Patrick Day

Birk & Blyme Pty LtBirk & Blyme Pty Ltdd Phone: 02-9452 0222 Fax: 02-9972 7901Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: wwwOnline ordering: www.order.order.birk-blyme.com.birk-blyme.com2

Printech Industrial Supply10 Jalan Denai 8Taman Bukit JayaUlu Tiram 81800Johor Bahru, Johor, Malaysia

Ph: +60 7 861 2733Fax: +60 7 861 4470Email: [email protected]

Perumal Naidu

[email protected]

[email protected]

[email protected]

[email protected]

Index

Birk & Blyme Pty LtBirk & Blyme Pty Ltdd Phone: 02-9452 0222 Fax: 02-9972 7901Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: wwwOnline ordering: www.order.order.birk-blyme.com.birk-blyme.com

3

At BIRK & BLYME we offer aA WIDE RANGE OF QUALITY PRODUCTSFAST DELIVERY SERVICEMONEY BACK GUARANTEEHELPFUL FRIENDLY SERVICE

30 day accounts to approved applicants

OUR GUARANTEEWe guarantee the quality of our product,we will replace faulty product or your moneyback. Claims on faulty or damaged productmust be lodged within 14 days of receipt ofgoods.

You can ORDER byPHONE: 61 2 9452 0222FAX: 61 2 9972 7901Email: [email protected]: www.order.birk-blyme.com

Disclaimer:Brand names and trademarks published herein are registered trademarks of their respective companies. Birk & Blyme is not an authorised dealer of these companies. All mentioned spare parts are alternative partsto those of the OEM. Birk & Blyme supply compatible highquality replacement parts. All indicated reference numbersare only used for identification purposes.

SHEET FED

4 - 6 Brushes7 Wash-Up Blades8 Grippers, Hickey Pickers, Ink Duct Seals9 -10 Suction Cups11 - 13 Flat Suckers14 Sheet Seperators

FINISHING

15 Folding & Stitching16 -17 Paper Drilling18 Paper Cutting Knives & Accessories19 Cutting Sticks20 Rotary Trimmers

CONVERTING & PACKAGING

21 Circular Blades, Crush Cut22 Circular Shear Cut, Dished Slitters23 Circular Shear Cut, Anvils24 Circular Shear Cut, Holders25 Circular Shear Cut, Pneumatic Holders26 Knife Blocks, Trimmer Blades & Holders27 Doctor Blade28 - 29 Packaging Knives

WEB PRESS PARTS

30 Cutting & Perforating Knives, Straight31 -32 Pressure Bars (Cheek Woods),

Knife Rails33 Cutting Sticks34 Folder Pins (Pin Screws)35 Folder Pins Accessories,

Gripper & Stripper Fingers36 Circular Blades & Rollers37 Cutting & Transport Rollers38 Tucker, Chopper & Jaw Blades39 Ink Duct Blades & Wash-Up Blades40 Bearer Wipes & Foam Bars41 Brushes42 Miscellaneous Parts

(See page 43 for details to Order On-Line)

2005 Updated Catalogue

Brushes - Sheet Fed Press

Birk & Blyme Pty Ltd Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: www.order.birk-blyme.com

Feeder & Delivery WheelsBrush wheels for the feeder sectionused to ensure smooth transportation of the paper sheet across the feedboard section.

RUB-L132928-LHeidelberg* ref. 66.020.122

T-04303Komori* ref.444-1341-124

T-04605Shinohara

RUB-L132927-LHeidelberg* ref. 66.891.006

T-04322Komori* ref. 261-1434-400

T-04950Bobst Pulley Wheel

T-04302MAN-Roland* Ref 3E-903

T-04738Komori* ref. 046-3363-05I

T-04953Planeta

T-04303-MANMAN-Roland* Ref 3T-69

T-04604Shinohara Ref. 2P52

T-04300Miehle

* Heidelberg, Shinohara, Komori and MAN Roland are registered trademarks

4

Brushes


Part # OEM Ref Description

SOB-015 *Heidelberg QM4666.020.122 68 x 12 x 4.5 mm

SOB-L132926-L *Heidelberg SM04.022.069 71 x 16 x 6.5 mm

SOB-L132925-L *Heidelberg GTO66.028.109F 80 x 12 x 4.0 mm

T-03115 Komori444-1665-00S

86 X 15 mmSpring Steel

T-03129 Man Roland3D-38

93 X 15 mmCarbon Steel

T-03150 Man RolandBX1185MTG

84 x 19 mm. Steel Rodw/ Brass Holder

T-04381 Man Roland3E-902

95 x 15 mm. CarbonSteel Holder

SHEET STEADIER BRUSHES

T-03129

SOB-L132

926-L

T-04381T-03115

T-03150

SOB-L132925-L

SOB-015

Sheet Steadier brushes (alsoknown as Hold Down brushes) areused to hold down the paper sheetbefore being lifted into the feedersection.


BWR-L149180 *Heidelberg 81.205.101/02

Blanket Wash - SM1021120/1032.5 x 82.8 mmCore 50.0 mm dia.

BWR-L149181 *Heidelberg 5.661.401

Blanket Wash - SM72/74820/731.5 x 82.8 mmCore 50.0 mm dia

SP102-DB *HeidelbergImpression Wash - SM1021041 x 82 mm OD x 40 mm ID.Coiled Brush (spirals)

C6.204.012F *Heidelberg Back Cylinder Wash - SM102CD Unit

BWR-1291541*Roland 700

(also available forR300 and R900)

Blanket Wash - Roland 7001064.0/1056.0 x 70.0 mmCore 46.0 mm dia

5435111-01 *Heidelberg/Harris Web

Blanket Wash - S20003.5” finished outside diameter

The above brushes are suppliedwithout the bearings, gear and eccentric

BRUSH ROLLERS

BWR-L149180 (SM102), BWR-L14981 (SM72/74)

Blanket Wash brush

Coiled brush

Blanket Wash brush

Roland 300, 700 and 900

* Heidelberg, Harris, Komori and MAN Roland are registered trademarks

5

Save on OEM Quality

Brushes!

Brushes



T-03111 Sheet Cleaner Aluminium Block x.008” CrimpedBlk Nylon Fill x 7/8” trim.

T-03112 Sheet Cleaner Aluminium Block x.004” CrimpedNatural Nylon Fill x 7/8” trim.

T-03113 Sheet CleanerAluminium Block x.008” CrimpedBlk Nylon Fill w/ .003 Brass x7/8” trim.

T-03114 Sheet CleanerAluminium Block x.004” CrimpedNatural Nylon Fill w/ .003 Brassx 7/8” trim.

T-03130 Vits Sheet Cleaner Filled with Nylon orNylon/Brass mix.

T-MBS-82 Herbert StaticControl

Strip Brush .812” -.4375”beveled Trim x 41” long x .003Level Brown Nylon Fill.

T-02290 Herbert StaticControl

Strip Brush .625” -.375” beveledTrim x 35” long x .006 CrimpedBlack Nylon Fill.

T-03111T-03112

T-03113T-03114

T-03130T-02290

T-MBS-82

SHEET CLEANER BRUSHES


T-04669 *Komori274-8805-300

870 x 20 mm, Wood Block65 mm Trim.

T-04670 *Komori244-8840-004

650 x 20 mm, Wood Block 65 mm Trim.

T-04671 *Komori444-8840-012


T-04672 *Komori294-8840-300


WIPER BRUSHES FOR GRIPPER BARS

.012” Level Natural Nylon Trim

046700467104672

04669

ROTARY CUTTER & LETTER PRESS BRUSHES

T-04763


T-02038 *SchefferC13544-1

Refill Split Core Poly Block 4.5” dia x .014” crimped nylon fill

T-03243 *SchefferB22542

Delrin Segment Brush1.5” x.012” crimped yellow nylon

T-04808-2 *SchefferB23174

Delrin Segment Brush with Inserts1.25” x.012” crimped yellow nylon

T-04763 *Heidelberg(all models)

Refill Aluminium or Steel Bar5/8” - 7/8” Angled Goat HairTrim

T-02038 T-03243

T-04808-2

also available in 5 1/8” dia

6

Correctprofile

Incorrectprofile

Ink Wash-Up Blades

WWASHASH-U-UPP BBLADESLADES

Our range of Wash-Up Blades includesRubber/Metal, Polyurethane/Metal, Rubber, Fibreand Plastic type blades and can be supplied as peroriginal specifications, or modified to customersrequirements. The below list of blades are normallyavailable from our stock for immediate delivery. Blades not listed are subject to minimum purchasequantities and a few weeks leadtime. Custom bladescan be made with fastening holes or with fasteningslots for easy installation.

*Heidelberg GTO, MO, Speedmaster, Komori, MAN Roland, Fuji, Ryobi, Itek are registered trademarks of their respective companies.,

Model Part # Type Length Width Thickness HolesGto 46 HEI0500B Metal/Rubber 500 60 0.5 5 Gto 52 HEI0560B Metal/Rubber 560 60 0.5 6 MO, SORK standard HEI0710B Metal/Rubber 710 60 0.5 8 Speedmaster 52 HEI0605A Metal/Rubber 605 46.75 0.5 7Speedmaster 72 HEI0790B Metal/Rubber 790 60 0.5 11Speedmaster 102 HEI1090B Metal/Rubber 1090 60 0.5 11Komori Lithrone 26 KOM0726B Metal/Rubber 726 37 2.0 6Komori Lithrone 40 KOM1077A Metal/Rubber 1077 47 0.5 15Komori Lithrone 40 KOM1094A Metal/Rubber 1094 50.3 0.5 15Komori Lithrone 40 KOM1110A Metal/Rubber 1110 47 0.5 15Roland 200 ROL0785A Metal/Rubber 785 64.5 0.5 8Roland 300 ROL0817A Plastic 817 60 1.0 8Roland 700 ROL1091A Metal/Rubber 1091 56 0.5 13Fuji Shinohara 52 FUJ0550B Metal/Rubber 550 42 2.0 7Fuji 52 standard FUJ0580A Metal/Rubber 580 42 2.0 8Fuji Shinohara 74 FUJ0795A Metal/Rubber 795 48 2.0 13Ryobi 510/512 RYO0557A Rubber 557 29 4.0 9Itek 975/985/3985 ITE0354A Rubber 354 41 5 6

Blade type Quality Hardness ApplicationMetal/Rubber CS80/CS04 steel, Black NBR soft 74-78 shore Autowash - HDMMetal/Rubber CS80/CS04 steel, Black NBR 84-89 shore StandardMetal/Rubber CS80/CS04 steel, Black MNBR 80-85 Shore UV InksMetal/Polyurethane CS80/CS04 steel, Nat. Polyurethane 90 shore UV InksRubber Black NBR 70-90 Shore Standard

Fibre Laminates Resin Compressed Fibre Standard for L’Pressand Numbering Units

Rigid Natural HDPE/PP/UPVC 65-75 Shore standardFlexible Natural Flexible PVC 79-82 Shore Planeta Wash-Up

Rubber or Polyurethane profile is vulcanised directly onto steel using a uniquechemical “cross-link”. No adhesive used = no bond failure. “Stainless” metal parts = No corrosion in use.

Call us for your Wash-Up blade requirementsfor all Press Makes and Models.

Material Specifications

Birk & Blyme Pty LtBirk & Blyme Pty Ltdd Phone: 02-9452 0222 Fax: 02-9972 7901Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: wwwOnline ordering: www.order.order.birk-blyme.com.birk-blyme.com 7

Grippers, Hickey Pickers, Ink Duct Seals

* Heidelberg GTO 46/52, MO, Roland, Praktica 00/01, Ryobi, Adast Dominant, Gestetner, Oliver Sakurai, Hamada,Multilith, AB Dick, Chief, Komori, KBA, Fuji are registered trademarks of their respective companies.

GrippersGrippers for feeder and delivery systems.For use on * Heidelberg, Komori, Roland,Ryobi, Itek, Akiyama, Hashimoto andPlaneta etc.

Available with standard steel,polyurethane tip, rubber tip, carbide sprayamd Diamond coatings

Hickey PickersHickey Pickers for removing hickeys(contaminants) from printing plates.Combination of developed raw materialsand production process optimises productperformance and ensures that the productis inert to corrosion while in use.

Available to suit many press makes andmodels including *Heidelberg, KBA,Planeta, Komori, Miller, Fuji, Shinohara,Oliver Sakurai, Ryobi, Roland andAkiyama.

Ink Duct SealsPair of left and right seals manufactured inTeflon and Felt for use on Varn Kompacsystem. 4 sizes produced in high qualityPTFE compound to exact specification toensure 100% seals of the duct.

Available for Heidelberg GTO 46/52, MO,Roland, Praktica 00/01, Ryobi, AdastDominant, Gestetner, Oliver Sakurai,Hamada, Multilith, AB Dick, Chief and more.

KOMPAC IIKOMPAC III


Suction Cups

TThhee pprr iimmee ssoouurrccee ffoorr aa ll llyyoouurr ssuucckkeerr rreeqquuii rreemmeennttss.. .. ..Extensive range in Rubber, Vinyl, Urethaneand Silicone for equipment such as:

AB Dick, ATF Chief, Bobst, Bourg, Duplo,Ferag, Fuji, Hamada, Heidelberg, Horizon,Itek, MAN Roland, Komori, Phillipsburg,Ryobi, Sakurai and Shinohara etc.

RVC176 66 24 Chief Light 24 Chief Heavy 23 Amber 23 Red

7 white 78 88 22 83 Blue 83 Red

92 99 68 80 BB-0633 2941612400

0186 0198 RVCB1P-30 370748 109

104 A clear82 102 103 104

95

0204

Please call us for Suckers not listed.

Extensive range available for most machines. Pleaserefer to our “Bindery Catalogue” for suckers usedon bindery equipment.

AB Dick AB Dick ATF Chief ATF Chief Various Various

Kansas inserter Hamada Hamada Heidelberg Heidelberg Heidelberg

Heidelberg Heidelberg Heidelberg Heidelberg Komori Komori

Shinohara, Fuji 52 Sakurai MAN Roland MAN Roland Phillipsburg Ryobi

Itek / Ryobi Horizon Horizon Horizon, Duplo Horizon, Duplo Horizon

*Heidelberg, Komori, MAN Roland, Ferag, AB Dick, Ryobi, Itek, Horizon and Duplo are registered trademarks of their respective companies.

Birk & Blyme Pty Ltd Phone: 02-9452 0222 Fax: 029972 7901Online ordering: www.order.birk-blyme.com 9

Suction Cups

630A 630B 630C RVCB15

Ferag Ferag Ferag Ferag

B20 F20 RVCB10-3 RVC41C

RVC269 RTF 1648

Ferag Ferag Ferag Ferag

1 7200

Kluge Various

90 56

Mitsubishi Miehle, Roland

Dexter TF

RVC 33A

Vacuum CupBobst

118A40 x 38 x 15.0 mm

117A42 x 41 x 16.0 mm

Depanner CupDepanner Cup

GrabbersGrabbers have many advantages andare extremely useful in a wide rangeof different applications in many indus-tries. Every handyman should havesome. No Pump required High Holding

Power Release Button Easy use Available in 3 different sizes

Mr Grabber Mrs Grabber Miss Grabber

3.25” dia” 2.62” dia 2.12” dia

Window CupsSure Foot

The best sucker you can buy for a small offsetpress. The Sure Foot is a vacuum operatedtelescoping sucker foot that was designedspecifically for equipment such as AB Dick801, Ryobi 805 Multi 81A, B, C.

Window Cups suitable for use ona smooth non-porous surface.Available with metal hook, screwhole, plastic hook, “mushroom”knob.

Printing PressesMailroom EquipmentPackaging MachinesBindery EquipmentSmall Offset

Metal detectableSilicone Cups

Metal detectableSilicone Cups

*Heidelberg, Komori, MAN Roland, Ferag, AB Dick, Ryobi, Itek, Horizon and Duplo are registered trademarks of their respective companies.

Birk & Blyme Pty Ltd Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: www.order.birk-blyme.com10

Flat Suckers

Ever increasing running speeds of todays sheet fedprinting machines and collators demand the highestperformance from the feeder system.

Birk & Blyme stocks a full range of flat rubber suckersfor all types of machines. The range have beendeveloped to offer a durable and consistent perform-ance when used in sheet feeders. All flat suckers arecolour coded which indicates thickness.Please refer to the table.

Flat Sucker Thickness & Colour RangeKey Thickness Material - Colour

A 0.5 mm (0.015”) Rubber - WhiteB 0.8 mm (0.032”) Rubber - PinkC 1.0 mm (0.040”) Rubber - TanD 1.6 mm (0.062”) Rubber - BeigeE 2.0 mm (0.080”) Rubber - GreenF 0.8 mm (0.032”) Poly - Clear

1.0 mm & 1.5 mm Silicone Suckersare available on request!

A) 99001B) 99047C) 99092D) 99138E) 99184F) 99230

A) 99002B) 99048C) 99093D) 99139E) 99185F) 99231

A) 99003B) 99049C) 99094D) 99140E) 99186F) 99232

A) 99004B) 99050C) 99095D) 99141E) 99187F) 99233

12.7 x 1.6 mm(1/2” x 1/16”)

15.9 x 1.6 mm(5/8” x 1/16”)

15.9 x 3.2 mm(5/8” x 1/8”)

17.5 x 3.2 mm(11/16” x 1/8”)

19 x 4.8 mm(3/4” x 3/16”)

19 x 6.4 mm(3/4” x 1/4”)

20.6 x 4.8 mm(12/16” x 3/16”)

22.2 x 3.2 mm(7/8” x 1/8”)

19 x 1.6 x 1 mm(3/4” x 1/16”)

19 x 1.6 mm(3/4” x 1/16”)

23.8 x 9.5 mm(15/16” x 3/8”)

25.4 x 4.8 mm(1” x 3/16”)

25.4 x 6.4 mm(1” x 1/4”)

25.4 x 9.5 mm(1” x 3/8”)

22.2 x 4.8 mm(7/8” x 3/16”)

22.2 x 6.4 mm(7/8” x 1/4”)

27 x 9.5 mm(1 1/16” x 3/8 ”)

28.6 x 6.4 mm(1 1/8” x 1/4”)

28.6 x 12.7 mm(1 1/8” x 1/2”)

27 x 3.2 mm(1 1/16” x 1/8”)

27 x 6.4 mm(1 1/16” x 1/4”)

AB DICK - STDA) 99006B) 99052C) 99097D) 99143E) 99189F) 99235

A) 99005B) 99051C) 99096D) 99142E) 99188F) 99234

A) 99007B) 99053C) 99098D) 99144E) 99190F) 99236

A) 99008B) 99054C) 99099D) 99145E) 99191F) 99237

A) 99009B) 99055C) 99100D) 99146E) 99192F) 99238

A) 99010B) 99056C) 99101D) 99150E) 99193F) 99239

A) 99011B) 99057C) 99102D) 99147E) 99194F) 99240

A) 99012B) 99058C) 99103D) 99148E) 99195F) 99241

A) 99013B) 99059C) 99104D) 99149E) 99196F) 99242

A) 99014B) 99060C) 99105D) 99151E) 99197F) 99243

A) 99015B) 99061C) 99106D) 99152E) 99198F) 99244

A) 99016B) 99062C) 99107D) 99153E) 99199F) 99245

A) 99017B) 99063C) 99108D) 99154E) 99200F) 99246

A) 99018B) 99064C) 99109D) 99155E) 99201F) 99247

A) 99019B) 99065C) 99110D) 99156E) 99202F) 99248

A) 99020B) 99066C) 99111D) 99157E) 99203F) 99249

A) 99021B) 99067C) 99112D) 99158E) 99204F) 99250

30.2 x 12.7 mm(1 3/16” x 1/2 ”)

B) 99070A) 99024

C) 99115D) 99161E) 99207F) 99253

Thickness Range Part numbers

OD x ID

HOW TO ORDER

(see table)

Continued over......

Birk & Blyme Pty Ltd Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: www.order.birk-blyme.com 11

Pre-packedin 25, 50 or 100

pcs per bag!

Flat Suckers

30.2 x 12.7 mm(1 3/16” x 1/2 ”)

30.2 x 14.3 mm(1 3/16” x 9/16”)

31.8 x 4.8 mm(1 1/4” x 3/16”)

28.6 x 14.3 mm(1 1/8” x 9/16”)

30.2 x 9.5 mm(1 3/16” x 3/8”)

A) 99022B) 99068C) 99113D) 99159E) 99205F) 99251

A) 99023B) 99069C) 99114D) 99160E) 99206F) 99252

A) 99024B) 99070C) 99115D) 99161E) 99207F) 99253

A) 99025B) 99071C) 99116D) 99162E) 99208F) 99254

A) 99026B) 99072C) 99117D) 99163E) 99209F) 99255

31.8 x 14.3 mm(1 1/4” x 9/16 ”)

35 x 9.5 mm(1 3/8” x 3/8”)

35 x 12.7 mm(1 3/8” x 1/2”)

31.8 x 9.5 mm(1 1/4” x 3/8”)

31.8 x 12.7 mm(1 1/4” x 1/2”)

A) 99028B) 99073C) 99119D) 99165E) 99211F) 99257

A) 99029B) 99074C) 99120D) 99166E) 99212F) 99258

A) 99030B) 99075C) 99121D) 99167E) 99213F) 99259

A) 99031B) 99076C) 99122D) 99168E) 99214F) 99260

A) 99032B) 99077C) 99123D) 99169E) 99215F) 99261

35 x 14.3 mm(1 3/8” x 9/16”)

A) 99033B) 99078C) 99124D) 99170E) 99216F) 99262

38.1 x 9.5 mm(1 1/2” x 3/8”)

A) 99034B) 99079C) 99125D) 99171E) 99217F) 99263

38.1 x 12.7 mm(1 1/2” x 1/2”)

A) 99035B) 99080C) 99126D) 99172E) 99218F) 99264

38.1 x 14.3 mm(1 1/2” x 9/16”)

A) 99036B) 99081C) 99127D) 99173E) 99219F) 99265

38.1 x 15.9mm(1 1/2” x 5/8”)

A) 99037B) 99082C) 99128D) 99174E) 99220F) 99266

41.3 x 9.5 mm(1 5/8” x 3/8”)

A) 99038B) 99083C) 99129D) 99175E) 99221F) 99267

41.3 x 12.7 mm(1 5/8” x 1/2”)

A) 99039B) 99084C) 99130D) 99176E) 99222F) 99268

41.3 x 14.3 mm(1 5/8” x 9/16”)

A) 99040B) 99085C) 99131D) 99177E) 99223F) 99269

Continued over......

For information on our range of mouldedsuction cups, please refer to pages 9 & 10.

Thickness tableKey Thickness Material - Colour

A 0.5 mm (0.015”) Rubber - White

B 0.8 mm (0.032”) Rubber - Pink

C 1.0 mm (0.040”) Rubber - Tan

D 1.6 mm (0.062”) Rubber - Beige

E 2.0 mm (0.080”) Rubber - Green

F 0.8 mm (0.032”) Poly - Clear


*HeidelbergKomoriMAN Roland

Flat Suckers

41.3 x 15.9 mm(1 5/8” x 5/8”)

A) 99041B) 99086C) 99132D) 99178E) 99224F) 99270

44.5 x 7.9 mm(1 3/4” x 5/16”)

A) 99042B) 99087C) 99133D) 99179E) 99225F) 99271

44.5 x 12.7 mm(1 3/4” x 1/2”)

A) 99043B) 99088C) 99134D) 99180E) 99226F) 99272

44.5 x 14.3 mm(1 3/4” x 9/16”)

A) 99044B) 99089C) 99135D) 99181E) 99227F) 99273

44.5 x 15.9 mm(1 3/4” x 5/8”)

A) 99045B) 99090C) 99136D) 99182E) 99228F) 99274

50.8 x 12.7 mm(2” x 1/2”)

A) 99046B) 99091C) 99137D) 99183E) 99229F) 99275

Part # Size (mm) NotesHEIDELBERG - Letterpress, K Line,

M Offset, S Line, Speedmaster

99070 30.2 x 12.7 x 0.8 28401 SORD

99080 38.1 x 12.7 x 0.8 28402

99067 28.6 x 12.7 x 0.8 28403

99150 22.2 x 3.2 x 1.6 T1625 KORS

99109 27.0 x 6.4 x 1.0 KORD

99071 30.2 x 14.3 x 0.8 2-14170-01

99120 31.8 x 12.7 x 1.0 66.028.406

KOMORI OFFSET99067 28.6 x 12.7 x 0.8 alternatively 0.5 mm

99074 31.8 x 12.7 x 0.899077 35 x 12.7 x 0.8 alternatively 0.5 mm

99081 38.1 x 14.3 x 0.8 alternatively 0.5 mm



99045 44.5 x 15.9 x 0.5 alternatively 1 mm

MAN ROLAND 99070 30.2 x 12.7 x 0.899073 31.8 x 9.5 x 0.8 alternatively 1 mm


99076 35 x 9.5 x 0.8 alternatively 1 mm

99078 35 x 14.3 x 0.8 alternatively 1 mm



99135 44.5 x 14.3 x 1.099045 44.5 x 15.9 x 0.5 alternatively 1 mm

Wall ChartPlease call us for your free handy wall chart. Specificallymade to hang near your machine, production office orworkshop. On the back there are also feature diagrams ofmoulded cups listing the part number for some of the com-mon printing and collating equipment.

Common size to suit:

*Heidelberg, Komori and MAN Roland are registered trademarks of these companies.

Sucker Description PriceRubber up to 19 mm OD $0.46Rubber 19 mm OD and over $0.55Poly 0.8 mm up to 38.1 mm OD $0.80Poly 0.8 mm 38.1 mm OD and over $0.95

Minimum$25.00invoice

Birk & Blyme Pty Ltd Phone: 02-9452 0222 Fax: 02-9972 7901Online ordering: www.order.birk-blyme.com 13

Sheet Seperators

# SSFFuji, Komori

# SSR015Ryobi, Itek

# SSR1015Ryobi 3200

# SSH *Hamada, Multilith

# SSR2030Ryobi 500K

# SSF1Fuji, Komori

# SSH1H’berg, Roland,KBA

# SSHCB01Heidelberg

# SSHCB02Heidelberg

# SSHCS01Heidelberg

# SSHCS02Heidelberg

# SSHCBL01Heidelberg

# SSHCBL01Heidelberg

# SSLSHeidelberg

# SSLHeidelberg

# SSLHSHeidelberg

# SSRHSHeidelberg

# SSRHHeidelberg

81 x 12 x 0.10 mm 81 x 12 x 0.20 mm 81 x 12 x 0.10 mm 81 x 12 x 0.20 mm 81 x 32 x 0.10 mm

81 X 32 X 0.10 MM

39 X 15.9 X 0.15 mm 20.5 X 16 X 0.15 mm32 X 15.9 X 0.15 mm

46.5 x 12 x 0.30 mm*in Brass or Bronze42.5 x 14.3 mm

0.13 or 0.20 thick54 x 15 mm

0.10, 0.20 or 0.30 thick

42 x 15 mm0.10, 0.20 or 0.30 thick

39.5 x 12.3 x 4.5 mm146 x 120 x 0.10 mm146 x 120 x 0.10 mm146 x 120 x 0.10 mm146 x 80 x 0.10 mm

D/SideO/Side

Sheet Seperators, Sheet Smoother PlateSprings and Rubber Hoods are available formost Presses including Heidelberg, Fuji,Komori, Roland Hamada, Chief, Miller Ryobi,Itek and Multilith.

Sheet Seperators are manufactured from thehighest quality steel and brass material.Rubber Hoods (for Heidelberg GTOmachines) are moulded in a high quality natural rubber compound.

Sheet Seperators (“Cat Whiskers”)

* Heidelberg, Fuji, Komori, Roland Hamada, Chief, Miller Ryobi, Itek and Multilith are registered Trademarks.


Folding & Stitching

* Stahl, MBO, G&K, Shoei, Eurofold, Morgana & Muller are registered trademarks of their respective companies.

We carry an extensive line of parts and accessoriesto suit various folding machines, including *Stahl,MBO, G&K and H&H etc. All replacement parts aremanufactured to the highest standards and meetsOEM specifications.

Birk & Blyme also offers stitching heads and complete stitching machines from Deluxe-Bostitch Stitcher and Hohner.

Part of our range includes:Perforators, Slitters, and Creaser bladesSlitter Shaft AccessoriesFold RollersStitching Head replacement parts for *Hohner,Deluxe-Bostitch, Interlake, Acme, Muller andMagnatek.

Narrow creasing option perfect for light/coatedstocks and above. Wide creasing option for heavy/coated materialsand above.Perfect for pre-folded sectionsExcellent on web/digital

Hohner heads Stitcher parts

The TRI-CREASER produces perfect results time aftertime for material ranging from 150Gsm to 350gsm.

Attaches to all popular makes of FoldingMachines, including *Stahl, MBO, G&K,Shoei, Eurofold and Morgana etc.

The revolutionary TRI-CREASERtotally eliminates fibre crackingand takes just minutes to set upeven by inexperienced operators.

For more information on the above and other bindery related products, please refer to our

“Bindery Knives & Part“Bindery Knives & Parts Product Cats Product Catalogue” alogue”


END those

creasing hassles

Paper Drills, Baseboards and sharpening tools to suit Lihit, Sterling,Uchida, Iram, Citoborma, Hang etc. Teflon Coated drills available in manysizes. Provide lubricity to the inside andoutside of your drills. Slugs flow smoothlywithout binding. Friction is reduced toincrease the wear life of the cutting edge.This is a very good coating for keepingslugs from building up and breaking thedrills. Works better on varnished or laminated stock.

Uchida VS10 & VS15Head Dia. 11 mm - Overall Length 65 mm

Head Dia. 16 mm - Overall Length 65 mm

Uchida VS25, VS55 & VS200,Citoborma, Stago, Hang, Corta etc.

Hole Size Drilling Capacity Part #3.0 mm 30 mm D1-3-304.0 mm 30 mm D1-4-305.0 mm 30 mm D1-5-306.0 mm 30 mm D1-6-30Baseboards, pack of 5All metal sharpening toolSharpening kit (Stone/Sharp. tool)

Hole Size Driling Capacity Part #10.0 mm 50 mm D2-10-5011.0 mm 50 mm D2-11-5012.0 mm 50 mm D2-12-5013.0mm 50 mm D2-13-50All metal sharpening tool,for large sizes

Head Dia. 11 mm - Overall Length 65 mm

Uchida VS25, VS55 & VS200,Citoborma, Stago, Hang, Corta etc.

Hole Size Drilling Capacity Part #3.0 mm 30 mm D3-3-304.0 mm 40 mm D3-4-405.0 mm 50 mm D3-5-505.5 mm 50 mm D3-5.5-506.0 mm 50 mm D3-6-50As above - *Teflon Coated6.5 mm 50 mm D3-6.5-507.0 mm 50 mm D3-7-508.0 mm 50 mm D3-8-509.0 mm 50 mm D3-9-50Baseboards for VC25, pack of 5Baseboards for VS55, pack of 5All metal sharpening tool Sharpening kit (Stone/Sharp. tool)

Lihit 2001Head Conical- Overall Length 53 mm

Hole Size Drilling Capacity Part #4.0 mm 26 mm D4-4-265.0 mm 26 mm D4-5-266.0 mm 26 mm D4-6-266.5 mm 26 mm D4-6.5-26Baseboards, pack of 5All metal sharpening toolSharpening kit (Stone/Sharp. tool)

# D1

# D2

# D4

# D3

Paper Drilling


Lihit 2003Head Conical- Overall Length 60 mm

Hole Size Drilling Capacity Part #6.5 mm 32 mm D5-6.5-32Baseboards, pack of 5All metal sharpening toolSharpening kit (Stone/Sharp. tool)

Head Dia. 11 mm - Overall Length 100 mm*Overall Length 86 mm

Iram, Citoborma, Hang,Nagel, Corta etc.

Hole Size Drilling Capacity Part #*3.0 mm 30 mm D8-3-304.0 mm 40 mm D8-4-405.0 mm 65 mm D8-5-656.0 mm 65 mm D8-6-65As above - *Teflon Coated7.0 mm 65 mm D8-7-658.0 mm 65 mm D8-8-659.0 mm 65 mm D8-9-6510.0 mm 65 mm D8-10-65

DDRILLRILL DDIAMETERSIAMETERS CCONVERSIONONVERSION TTABLEABLEHHOWOW TTOO OORDERRDER

Head Conical - Overall Length 80 mmLihit 1013 & 1015

Hole Size Drilling Capacity Part #3.0 mm 25 mm D6-3-254.0 mm 45 mm D6-4-455.0 mm 45 mm D6-5-456.0 mm 45 mm D6-6-456.5 mm 45 mm D6-6.5-457.0 mm 45 mm D6-7-458.0 mm 45 mm D6-8-45Baseboards for DS-VC25, pack of 5Baseboards for VS55, pack of 5All metal sharpening tool Sharpening kit (Stone/Sharp. tool)

Scew in type headSterling, Custom, PDC, Kuhl etc.

Hole Size Drilling Capacity Part #1/8” 20 mm D7-1/8-205/32” 25 mm D7-5/32-253/16” 30 mm D7-3/16-307/32” 35 mm D7-7/32-351/4” 50 mm D7-1/4-509/32” 50 mm D7-9/32-505/16” 50 mm D7-5/16-503/8” 50 mm D7-3/8-507/16” 50 mm D7-7/16-50Baseboard 753 x 24.4 x 4.5 mmAll metal sharpening tool complete Replacement three flute sharpening bit

# D7# D5

# D6

# D8

Example: Lihit Drill, 6.5 mm holePart Number: D6-6.5-45

Drill #

Hole Size

Drilling Capacity

Order online atOrder online atwwwwww.order.order.birk-blyme.com.birk-blyme.com

Paper Drilling

Sterling Sharpening Tool(for D7 Drill Bits Only)

# SHP-STL-01

Sharpening Tool(D1, D2, D4, D5, D6 Drill Bits)

# SHP-AM-01



Paper Cutting Knives

KKNIVESNIVES

QQUALITYUALITY

Compare our quality and prices for value! We supply a rangeof high quality paper cutting knives imported from Germany’stwo leading knife manufacturers, Schönenberger andFassco. Knives are available to suit both guillotines andthree knife trimmers for all makes and models including:Müller Martini, Polar, Sheridan, Wohlenberg, Horizon,Duplo, Bourg, Ideal and more!

We offer the following selection of knife grades, so you canchoose the right knife for your requirements.

Quality Code Description Info - Inserts

Standard Inlaid Tool Steel F-220 The quality of the hardened cutting steel iswell proven and suitable for universal use.

High Carbon/High Chrome(12% Chromium) F-236 Widely used for lower knives in three knife

trimmers.Out performs standard steel 2:1

High Speed Steel (HSS)(18% Tungsten inlay) F-3000

Designed to be more abrasion resistant. Thisknife will reduce down-time with approx 3-5times longer life than F-220

TCTTungsten Carbide Tipped TCT Well known quality with high wear resistance.

Out performs F-3000 up to 3 times.

For shear cut typeapplications only.

For more information on all Bindery Knives please refer to our“Bindery Knives & Parts Product Catalogue”

Jogger Blocks

Angle Guide

# BBS39

# 47 C-Shape

# CH5-7-M361

Knife Guard

Book Guides Mag PadCCUUTTTTIINNGG AACCCCEESSSSOORRIIEESS

The durable magnetic rubbersurface on one side holdsthe pad securely in positionon the clamp while cutting.The high density foam padprevents sharp edges of theclamp fingers from markingstock. Pack includes two(2) 3” x 15” pads.

Custom sizes availableon request.

Great protection whiletransporting knives.Adds protection whileservicing machine.Magnetic strip holdsguard firmly in placeAll plastic constructionfrom yellow uPVC

Jogger Blocks, heavyduty plastic with magneticstrip on base helps jog bottom sheets perfectly.Angle Guides, for printersthat need to cut corners, thisis the right little tool.

Book Guides are anessential tool to assure aneven cut when trimmingbooks on a guillotine.Attaches to the back gaugeand compress the spine ofthe books to assure a quality cut.

Cuts on any angle from 0-170°Slides and locks onto back gauge Cuts corners, tags and shapes

18


Cutting Sticks

CCUTTINGUTTING SSTICKSTICKS

Our premium quality imported cutting sticks willextend knife life and reduce machine downtime.DO NOT compromise your knives with poorquality cutting sticks.

For all paper cutters and three knife trimmers All sizes and material

Range

Availability

Material Colour Quality HardnessShore “D”

Application

uPVC Red Standard 80-82 Standard Steel Knives

HDPE White or Green Economy 67-68 All Knives except Trimmers

Polypropylene Beige, Grey or Pink Environmental 72-75 TCT & Trimmer Knives

Nylon White Premium 80-83 HSS & TCT Trimmer Knives

Cuttings sticks are available for mostGuillotines and Trimmers including: Polar,Wohlenberg, Itoh, Ideal, Horizon, Schneider,Sheridan, Müller Martini, Kolbus, Perfectaand many more.

Commonly stocked sizesPart # Fits machine Colour / type Length Square

CS-POL-92R Polar 92, Perfecta Red wavy 930 10 x 4.5 mmCS-POL-92G Polar 92, Perfecta Grey wavy 930 10 x 4.5 mmCS-POL-115R Polar 115, Perfecta Red wavy 1160 10 x 4.5 mmCS-POL-115G Polar 115, Perfecta Grey wavy 1160 10 x 4.5 mmCS-POL-137R Polar 137, Perfecta Red wavy 1380 10 x 4.5 mmCS-POL-137G Polar 137, Perfecta Grey wavy 1380 10 x 4.5 mmCS-WOL-92R Wohlenberg 92, Schneider Red wavy 930 10 x 4 mmCS-WOL-92G Wohlenberg 92, Schneider Grey wavy 930 10 x 4 mm

CS-WOL-115R Wohlenberg 115, Schneider Red wavy 1159 10 x 4 mmCS-WOL-115G Wohlenberg 115, Schneider Grey wavy 1159 10 x 4 mmCS-WOL-137R Wohlenberg 137, Schneider Red wavy 1380 10 x 4 mm

CS-WOL-137G Wohlenberg 137, Schneider Grey wavy 1380 10 x 4 mmCS-ITOH-1193R Itoh 115 Red straight 1193 15.9 x 15.9 mmCS-IDEAL-570 Ideal 4700 / 4810 / 4850 Red straight 570 14 x 14 mmCS-IDEAL-885 Ideal 7228 Red straight 885 14 x 14 mmCS-298-WHITE Horizon HT 70 White 298 15 x 7 mmCS-335-WHITE Horizon HT 70 White 335 12 x 12 mmCS-1000-WHITE Muller Martini, Kolbus White straight 1000 10 x 10 mmCS-1000-GREY Muller Martini, Kolbus Grey straight 1000 10 x 10 mmCS-1050-GREY Wohlenberg Grey straight 1050 24 x 4 mm

All other sizes available on request!

19

Stocked sticks - next day

delivery!

Part # Reference Description60058 0341.3320.4 Carbide Insert 19.05 x 19.05 x 4.76 60024 0341.3322.4 Knife, LEFT + RIGHT 55 x 14 x 5.860079 0341.3325.2 Knife Holder, L + R 250 x 70 x 34 - 24 teeth60215 0341.3330.2 Knife (anvil) Bottom 148 x 100 x 1060225 0341.3393.3 Knife, Bottom Steel 120.5 x 40 x 1060021 0341.3397.4 Knife, LEFT 60 x 18 x 5 60026 0341.3398.4 Knife, RIGHT 60 x 18 x 560076 0341.3399.2 Knife Holder, LEFT 250 x 70 x 39 - 18 teeth60084 0341.3400.2 Knife Holder, RIGHT 250 x 70 x 39 - 18 teeth60204 0341.3442.3 Knife, Bottom Carbide 120.5 x 40 x 1060001 0341.3513.4 Wetstone 150 x 50 x 1760201 0441.1417.3 Knife, Bottom Carbide 155.2 x 25 x 1560294 0441.1433.3 Knife, Bottom Carbide 155.2 x 25 x 960230 0441.1428.3 Knife, Bottom VANADIS10 156x 25x 1560022 0441.1454.4 Knife, LEFT 65 x 18 x 5 (p.0441.1412.4)60025 0441.1455.4 Knife, RIGHT 65 x 18 x 5 (p.0441.1414.4)60084 0441.1456.2 Knife Holder, LH 250x 70x 39.3, 18T (p.0441.1411.2)60085 0441.1457.2 Knife Holder, RH 250x 70x 39.3, 18T (p.0441.1413.2)60015 0441.2518.4 Grinding Wheel, Diamond 100x 10x 36 (p.0311.1235.4)

Part # Description Notes

G-250-Sch Slitter Ø250 mm GämmerlerG-200-Sch Slitter Ø200 mm GämmerlerG-Anvil/Bsc Anvil, Carbide Ø154 mm GämmerlerG-Anvil/Ssc Anvil, Carbide Ø120 mm GämmerlerG-Sgmnt Knife Segment 72 x 14 x 4 GämmerlerG-Sgmnt2 Knife Segment, Tapered, Short Gämmerler01613012A Upper Knife, ASP 23 HSS, Ø305 mm RS / RIMA011612006 Lower Knife, ASP 23 HSS, Ø300 mm RS / RIMA387 68 011 Upper Knife, LEFT Carbide 60 Serrations RS / RIMA387 68 012 Upper Knife,RIGHT Carbide 60 Serrations RS / RIMAE-055-09-850 Anvil, Carbide 150 x 110 x 6mm RS / RIMABB-0407 Knife Segment 50 X 14 X 4 mm RS / RIMA

Rotary Trimmers

SSINGLEINGLE SSTREAMTREAM RROTOTARARYY TTRIMMERSRIMMERS - M- MüLLERLLER**

*G*GÄÄMMERLERMMERLER & R& ROTOTAA-S-SCHNEIDERCHNEIDER BBLADESLADES

Part # Description Notes

BB92015 & 92016 Complete Milling Head 200 Dia. (L & R) 20 teethBB92022 & 92023 Complete Milling Head 250 Dia. (L & R) 26 teethBB92029 & 92030 Complete Milling Head 320 Dia. (L & R) 30 teeth92036 MEGA LIFE insert 55 x 18 x 5 mm, L 200 Dia. Head92037 MEGA LIFE insert 55 x 18 x 5 mm, R 200 Dia. Head92018 MEGA LIFE insert 55 x 18 x 5 mm, L 250/320 Dia. Hd92019 MEGA LIFE insert 55 x 18 x 5 mm, R 250/320 Dia. Hd

*G*GÄÄMMERLERMMERLER CCUTTERSUTTERS ININ SSCHÖNENBERGER DESIGN

*Schönenberger style rotarycutter with MEGA LIFE inserts

for Gämmerler Trimmers.*Brand names and trademarks published herein are registered trademarks of their respective companies.All reference numbers are only used for identification purposes.

GGäämmmmeerr lleerrRRoottaa--SScchhnnee iiddeerr

RRiimmaaMMüüll lleerr MMaarr tt iinn iiCCuussttoomm BBii ll tt®®

RRoocckk BBii ll ttOther makes available

on request!

Inline rotary cutters are madebyto suit the following machines

The Newly Designed Schönenberger Rotary Milling Cutters to suit Gämmerlermachines are fitted with MEGA LIFE Carbide inserts, not standard Carbide! Willlast 2-3 times longer than standard Carbide. Call for more information!

NNNNEEEEWWWW


Circular Blades

Slitting and Perforating WheelsAvailable for a wide range of machines, such asHeidelberg, Ryobi/Fuji, Didde, Dusenbery, LISA Cameron, Schriber, Kidder, Ashton, BaldwinGregg, Coretech, Rollem, Autobond and Solnajust to mention a few.

All knife edges and knife radii are automaticallyground by custom designed in-house edgegrinders to ensure the finest consistency andtolerances.

Chrome Alloy Tool SteelStandard Heat treated to 61/63 RcOther steel qualities and Rockwell C hardnessavailable on request (up to 64 Rc)

We are able of supplying any configuration youdesire from 1 tooth to 100 teeth per wheel. .

xTies from as small as .005” or as wide as 1.00”

TOLERANCES: Grinding wheels are used to cut allnotches after heat treating to ensure tolerances.

The inaccurate methods of “burning” in notches usingEDM or milling in notches are not used.

Cut & Ties

Part # Dimensions(OD x ID x Wheel thickness)

Machine

W01 30 x 16 x 5.0 mm * Heidelberg, GTO, Ko-Pack

W03 40 x 19 x 6.0 mm Ryobi, Itek

W05 50 x 19 x 5.2 mm Ofcon, Giebeler, Drent

W06 50 x 22 x 7.0 mm Solna

W08 58 x 22.2 x 11.1 mm Didde Glaser

W09 40 x 13 x 4.0 mm Fuji

W10 67 x 19 x 6.3 mm Schriber, Harris, Edelman

W13 76.2 x 19 x 5.2 mm Giebeler, Dusenbury

W14 76.2 x 19 x 6.3 mm Cameron, Hunkeler

W15 76.2 x 22 x 6.2 mm Cameron, Kidder, Ashton

W34 76.2 x 24 x 5.0 mm Hunkeler, LISA

255-60 63.5 x 28.58 x 6.3 mm Baldwin Gregg

TGW50001 2.475"x 1.375"x .012" Autobond, Rollem

TGW50182 2.5”x 1.375”x .0625” Autobond

The table is onlyshowing the mostcommonly used

wheel sizes. Pleasecall us for all other

sizes. Diameter capabilities from

19 mm up to 381 mm!

Bevel angles available:30o, 45o, 60o and 90o

Cutting Radii availablesquare, sharp, .002”, .005”,

.007”, and 041” full

Micro Perffrom 25TPI to 72 TPI


21

Circular Shear Cut

Dished Slitters Bottom Knives (Anvils) Knife Holders Crush Cut Wheels & Perforators Holder Accessories Knife Blocks

DDIISSHHEEDD SSLLIITTTTEERRSS

Standard Sizes (mm):

Part # Outside ∅∅ Inside ∅∅ Thickness NoteON-62-2 62 40 1.0ON-64-2 64.3 40 1.0 Arpeco

OBN-64-2 64.3 *43.5/38.0 1.0 Arpeco/Rotoflex

ON-75-5 75 40 1.0ON-75-12 75 45 1.0ON-75-15 75 50 0.6ON-81-5 81.5 60 0.6ON-90-4 90 60 1.2ON-100-11 100 70 1.0U-2734 105 65 1.2 MANON-107 107 65 1.2 MANON-111-8 111.91 80.96 1.77 KidderON-130-5 130 80 1.5OBN-130-2 130 *98/90 1.5 Jagenberg

OBN-130-3 130 *88/80 1.5OD-141-A 141 70 3.0 M.CottaOD-150-17 150 80 2.5 TidlandOD-200-10 200 80 4.0

Please call us for prices on these and ALL other sizes

Common Sizes

OD: 62, 64.3, 68, 75, 80, 90, 100, 105, 107, 108, 110130, 140, 150, 170 & 200

ID: 40, 45, 50, 60, 65, 70, 80, 95, 100 & 120

THICKNESS: 0.6, 0.8, 1.0, 1.2, 1.24, 1.5, 2.0 & 3.0

HollowGround

* Type “OBN” is Bayonet Lock type (pictured top)

**BBaayyoonneett

LLoocckk

Call for special Slitters to suit“Narrow Cut System” (MSS holders)

* Arpeco, MAN, Rotoflex, Kidder, Jagenberg M. Cotta and Tidland are registered trademarks of these companies


Circular Shear Cut

BOTTOM KNIVES (ANVILS)

Bottom Knife type Nfor axial clamping

Bottom Knife type NGWith Self Locking Device for plain shaft

Bottom Knife type USCutting Ring with square cutting edge

Bottom Knife type NSSfor axial clamping (Narrow Cut System)

Type N(range in mm)

Type NG(range in mm)

Type US(range in mm)

Type NSS(range in mm)

Outside ∅∅ 46 - 150 46 - 150 46 - 200 46, 77 and 80

Inside ∅∅ 30 - 120 25 - 120 30 - 180 30, 45 and 60

Thickness 3 - 25 6 - 25 0.5 - 2.5 1.0 - 2.0

Steel Qualities(see table below)

LWS, HWS LWS, HWS LWS, SBS,HWS, HSS LWS, HWS

Cutting Angle 3o 3o 90o 1.5o if thickness <1.5mm3 o if thickness >1.5mm

SpecificationsType

Code Steel group Used forLWS Alloyed Tool Steel Cutting tools, Knife Holders, SpacersSBS Specially Treated Steel Cutting toolsHWS High Chrome High Carbide (12% Cr) Cutting toolsHSS High Speed Steel (18% Tungsten) Cutting toolsHSP HSS Powder metal Cutting toolsHM Tungsten Carbide Tipped Cutting toolsRFS Stainless Steel (heat treatable) Cutting tools, Knife Holders, SpacersVGS Tempered Steel Knife Holders, SpacersRWS Stainless Steel Knife Holders, SpacersFBS, FRS* Spring Steel (*stainless) Knife Holders, Spacers

Steel Qualities

Ask for specialAsk for specialdimensions anddimensions andsteel qualities!steel qualities!


23

GermanSlitting

Technology

Circular Shear Cut

BLADE HOLDERS

Knife Holder type Mfor axial clamping

Knife Holder type MGWith Self Locking Device for plain shaft

Knife Holder type NSHSuited for Cutting Rings type US

Knife Holder type MSSfor axial clamping (Narrow Cut System)

Knife Holder type MDWith set screw Locking

Knife Holder type MGHWith Self Locking Device for plain shaft (High Speed System)

Type M Type NSH Type MG Type MSS Type MD Type MGH

Outside ∅∅ range in mm 50 - 132 46 - 80 50 - 132 46 - 76 80, 85 85 - 112

Knifeseat ∅∅ range in mm 40 - 120 34 - 68 40 - 120 40 - 70 70, 75 75 - 100

Inside ∅∅ range in mm 25 - 100 25 - 60 25 - 100 30 - 60 45, 60 60 - 80

Thickness range in mm 3 - 15 5 - 10 6 - 20 1 - 2 10, 15 25

*Steel Qualities VGS, LWS, RFS VGS VGS, LWS, RFS VGS VGS, LWS, RFS VGS, LWS

Ask for special dimensions and steel qualities!

SpecificationsType

* STEEL QUALITIES SEE CHART ON PAGE 23

To be used only with flexible Dished Slitters 0.4-0.6 mm thick.

HighSpeed


Circular Shear Cut

KNIFE HOLDERS

Pneumatic Slitter Holderfor fixing on a guide bar

Minimum c/c distance 100 mm(POH99) and 50 mm (POH48).Holders equipped with knifesupporting device for type ON,OD and OH Dished Slitters.Depth and lateral fine adjustmentsby means of stop nut and stopscrew.

Operating pressure is max 6 bar.

Complete Guide Bars available on request.

Type POH99 Type POH48

Pneumatic Top Knife Holderfor fixing on a guide barCutting width from 12 mm (TRITON)and 50 mm (QUADRON).

Pneumatic Crush Cut HolderSuitable for Crush Cut Wheels76~77 mm Outside diameter.

Holders are supplied completewith Air Hose connection andCrush Cut wheel. Compatible for Hunkeler, LISADusenbery, Kidder andCameron etc.

TRITON

Q68 and QHA

QUADRON

SPARE PARTS & Crush CutWheels can be suppliedseparately.

Spare Parts

Dimensions in bracketsare for QHA Holders(American version)

A two axle guiding deviceensures holder remains free fromplay and resistant to torsionCompatible with all known holdermodelsSeparate air connections for lon-gitudinal and transversal stroke,precise positive control.Knife head for single cut or withdouble knife for waste strip


25

TRIMMER BLADES & HOLDERS

KNIFE BLOCKS - type NB

Circular Shear Cut

For * Arpeco, Bowe, Rotoflex, Pitney Bowes and Kirk Rudy

Item Description Part No MachineMale Slitter 18420 Arpeco

Female Slitter 18801 Arpeco

Male Slitter (not pictured) 31902 Bowe

Female Slitter (not pictured) 31903 Bowe

Slitter Holder f. dished slitter 31904 Arpeco

Blade Holder for 18420 31311 Arpeco

Blade Holder for 18801 31310 Arpeco

Bush for 31311 540002bsh Arpeco

Cap Screw for 31310, 31311 5400037cs Arpeco

Compression Spring f 31311 540025spr Arpeco

Outside ∅∅ range in mm 77 80 105 105 124 150 150 180 210 240

Inside ∅∅ range in mm 60 60 80 90 100 100 120 150 180 210

Outside ∅∅ range in mm 250 275 290 300 300 350 390 400

Inside ∅∅ range in mm 210 245 260 250 270 310 350 360

Pitch from 5.0 mmGroove width from 2.2 mm

Standard widths and tolerance: 50/100 +/-0.02 Standard material: Alloyed Tool Steels

For axial clamping

Special dimensions and materials on request!

For blades not listed above, please contact us foravailability and/or submit your samples for quotation.



Doctor Blade

Preground UNGERDoctor Blades for flexo and Gravure Printing. Unger Doctor Blades are manufactured on CNC controlled precision machines under permanentobservation. After grinding the DoctorBlade Lamella is further put through anew polishing procedure, before beingfully automatically rolled up into a coil(without touching the edges). Can also be cut and stacked into fixed lengths as required. Only thehighest quality steels are used asbase material.

Blade Thickness 0.15 - 0.20 mm

Doctor Blade width 10.0 - 80.0 mm

Lamella thickness from 0.05 mm

Lamella width 0.80 - 1.7 mm

Contact angle (w/ cylinder) as requested

Length of Blade coil or fixed length

Blade Specifications

Please call for current prices and availability

Exact straightness

Uniform structure

High wear resistance

High tensile strength andhardness

27

Save on German madequality blades


Packaging Knives

PPACKAGINGACKAGING K KNIVESNIVESPrecision ground knives to specifications forhorizontal and vertical form fill and seal bag-makingmachines, shrink wrappers, flow wrappers, sack andbag making machines. Serrated and plain knives,zigzags, anvils, scissor knives, fixed and movingknife sets and bag handle knives.

TTRARAYY SSEALEAL KKNIVESNIVESFinish formed tray knives in hardened stainlesssteels for optimum cutting performance and hygiene.For packaging fresh, refrigerated and frozen foodproducts and ready meals. Also precision groundtoothed serrated strip.

SSCRAPERCRAPER B BLADESLADES

High Precision blades for the food and confectioneryindustries - scrapers for ice cream freezers and foruse with butter and edible oils, cake and biscuits,cereal and other food processing equipment. ForMachines including *APV Crepaco, Hoyer, Schroder,and Cherry Burrell amongst others. Blades can bepassivated and/or polished to a high luster. Steelgrades include special stainless 17-7 PH, 410 and420, tool and carbon spring steels.

OEM Quality

Non-Stick coatings if required

To suit *Ross-Reiser, Meca and Mondinimachines etc.

OEM Quality imported from Europe

Special coatings including TiN are availablefor Longer blade life.

Machine types include: *Bosch, Rovema,Cryovac, SIG, Ilapack, Sandiacre, Windmoller& Holscher, Gloucester, Tetra Pak, CavannaKawashima, Kisters, and Multivac

*Bosch, Rovema, Cryovac, SIG, Ilapack, Sandiacre, Windmoller & Holscher, Tetra Pak, Kawashima, Kisters, Cavanna, Multivac, Ross Reiser,Gloucester, Meca, Mondini, APV Crepaco, Hoyer, Schroder and Cherry Burrell are registered trademarks of their respective companies.,

28

Save on OEM

quality blades!

Cross-cutting knives (sheeter knives) are made forany type of machine up to 4000 mm (157”) length.There are no seams or joints in the steel/carbide. Being well aware of the problems of parallel rotarycutting, we only source knives from the leadingGerman manufacturers such as Fassbender(Fassco) and Schönenberger/WIDIA.

Prior to shipping the knives are subject to finalinspection to test certification. This costly measureassures customers the very best reliability ofunequalled fitting accuracy and plane parallelism.

Blades made to OEM specifications are available for the following common machines.


Packaging Knives

CCROSSROSS C CUTTINGUTTING K KNIVESNIVES

CCIRCULARIRCULAR T TOPOP/B/BOTTOTTOMOM K KNIVESNIVES

Top Knives (Slitters) are available in Tungsten Carbideand varieties of powder-metallurgic steel such as ASP.The use of top knives in powder steel combined withTungsten Carbide bottom knives have proved its worthin recent years, achieving reduced dust and downtime.

BELOIT-LENOXBIELOMATIK

MASON SCOTTJAGENBERG

Short delivery time on common sizes*

PASABANSTRACHAN HENSHAWVALMETWILL

others on request!

*BHS Corrugator, Beloit-Lenox, Bielomatik, Jagenberg, Valmet, Cerutti, MAN, Pasaban, Voith, Mason Scott, Strachan & Henshawand Will are registered trademarks of their respective companies.,

YYour Tour Tungsten Carbide Specialistungsten Carbide Specialist

12% ChromeSteel (HCHC)

HSS 18%Tungsten

Reduced dustLess downtime

* BHS Corrugator, Beloit-Lenox, Bielomatik, Jagenberg,Valmet, Cerutti, MAN, Pasaban, Voith and Will

29

Made inGermany

Web Press Parts

Cutting and Perforating KnivesCutting and Perforating Knives for most Web Press Folders including, *MAN, Mitsubishi, KBA,Plamag, Heidelberg/Harris, Goss Rockwell, Solna,TKS, Baker Perkins and Timson. We carry themost commonly used knives in stock for immediate delivery.

All knives are made of High Alloy Cutlery Steels.For extended service life of your knives, we can also supply PLUS 3, TiN and other special coatings. Anti-Gusseting Blades (for elimination of crow’sfeet) are also available for most press makes and models.

Tooth patterns, bevel type can be supplied as perthe range specified below. Please submit yourinquiries with dimensional information and ifpossible, include OEM reference numbers.

Cutting Knife with “Pointed” teeth

Cutting Knife with “Saw” teeth

SingleBevel

Single withCounter Bevel

DoubleBevel

Range Saw teeth Pointed teethFine 1.0 -1.5 mm 1.0 - 1.6 mm

Medium 2.0 - 2.5 mm 2.0 mm

Coarse 3.0 - 4.0 mm 2.5 - 3.0mm

Extra coarse 6, 8 and 10 mm

Tooth pitch is measured from tip to tip

Tooth pitch (spacing)

Pitch

* MAN, Plamag, KBA,Heidelberg/Harris, Goss Rockwell,Solna, TKS,Baker Perkins and Timson are registered Trademarks of these companies

Save on OEM Quality

knives


Web Press Parts

22m

m

1006160

14 mm

22.5

mm

U-2324

14 mm20

mm

U-1569

16 mm

20m

m

U-1367

17 mm

19.5

mm

82559SV

12 mm

19m

m

486V7801

15 mm

.500”

22m

m

U-2324-US3

.875”

.875

”

DF1075

20m

m

U-6860

16 mm20

mm

U-15605

19 mm

16m

m

U-15606

19 mm

20m

m

BB466540

13 mm

34m

m

BB474134

12 mm

Vulkollan Vulkollan

20m

m

U-7938

16 mm

19.5

mm

78699SV

12 mm

Made from Foam Material and MouldedPolyurethane to fit a wide variety of knifebox designs. All Pressure bars made fromFoam material have an outer skin layereliminating any fluid absorption. The below profile drawings are showingthe most common types in our supplyrange. Other profiles are available on request.

Pressure Bars

Part # Reference

U-1569M.A.N, Baker Perkins,Heidelberg, Goss Universal,Plamag, Hantscho, Timson

U-1367 Solna, Albert Frankenthal

486V7801 Toshiba, Mitsubishi

BB006160 Heidelberg Harris

U-2324 Harris, Goss C700

U-2324-US3 Goss C700

DF1075 Harris DFF (hardnose cheekwood)

82559SV Harris S2000, S3000

78699SV Harris S2000, S3000

U-7938 Goss (5 mm bevel)

U-6860 Goss (14 mm bevel)

U-15605 Mitsubishi

U-15606 Mitsubishi

BB466540 PFF3, PFJ3

BB474134 Heidelberg Web

Many more profiles available on request.Please submit your sample(s)!

Hardness: 45, 50 and 55 DuroVulkollan reinforced top available on

XXrequest (2 part Pressure Bar)

* MAN, Plamag, Heidelberg, Harris, Goss, Solna, Baker Perkins, Hantscho, Toshiba, Mitsubishi and Timson are registered Trademarks of these companies


Web Press Parts

Made from special abrasion resistantPolyamide with excellent slidingproperties. Used in Knife Box designswith pressure springs, commonly used inM.A.N., GOSS and KBA newspaperpresses. Available in both radiused andbevelled profiles.

Knife Rails

Complete Knife Boxes

* M.A.N., Goss and KBA are registered Trademarks of these companies

Radiusprofile

Bevelprofile

All sizes and profiles available. Please submit your samples for identification.

All rails are manufactured by Bruno Unger,Germany to OEM specifications.

Knife box with Foam typePressure Bars

Knife box with Polyamidetype Knife Rails

Knife boxwith Foam type Pressure Bars

Available for allmakes and

models of pressFolders

Knife boxwith Polyamide Knife rails

Primarilydesigned for

Folders inNewspaper

Printing Presses


Web Press Parts

We supply a wide variety of different sizeCutting Sticks in three proven materials.

Cutting Sticks

Rubber - 80,85 & 90 Duro Polyurethane - 75, 80, 85, 90 & 95 Duro Vulkollan® - 92~93 Duro

Do not compromise performance withpoor quality cutting sticks. Our premiumquality ensures extended knife life andreduced downtime.

Square edgeDual hardness Bevel edge

Square SizeSTANDARD LENGTHS

NoteRubber Polyurethane Vulkollan

8 x 8 mm 610 mm 610 mm not available Also available with groove

3/8” x 3/8” not available 711 mm not available

10 x 10 mm 550 mm 558 mm 600 mm

12 x 12 mm not available 600 mm 600 mm


15 x 15 mm 560 mm 600 mm 650 mm

5/8” x 5/8” not available 570, 600 mm not available

16 x 16 mm not available 570 mm 570 mm Both bevel & square edge

18 x 18 mm 600 mm 600 mm 600 mm


19 x 19 mm 560 mm 560 mm 570 mm

20 x 20 mm 550 mm 585 mm 585 mm

21 x 21 mm not available 570 mm not available special

22 x 22 mm not available 570 mm 570 mm

23 x 23 mm not available 620 mm not available

25 x 25 mm not available 595 mm not available

Specials20 x 12 mm not available 565 mm 565 mm

20 x 20 mm not available 480 mm Dual hardness 93/65 Duro

40 x 20 mm not available

1.0” x .875” not available 723 mm not available bevel edge

The above sizes are our standard lengths Other lengths and square sizes can be supplied as per your requirements


Most ssizes available ffrom

our sstock

Web Press Parts

* M.A.N., GOSS, Heidelberg/Harris, Baker Perkins, KBA, Toshiba, Timson and Mitsubishi are registered Trademarks of these companies

Folder Pins

Folder PinsDescription

Part Number U-5328 U-5328/sp U-3022 K.15.81 AUS-873 U-9002 K.15.6 K.15.7 U-11189 U-11217 AUS-1099

Thread Size M4 M4 M4 M4 M4 n/a M4 M4 M4 X 0.75 M5 M5

Shoulder size mm 5 5 5 5 5 n/a 5 5 5 7 Hex 7 Hex

Pin length 16 17 16 22 17 49.2 12 12* 16 14 14

Pin type plain plain,thick plain serrated serrated,

thin plain plain serrated plain plain serrated

Reference M.A.N M.A.N. M.A.N. M.A.N. M.A.N. M.A.N. M.A.N. M.A.N.Solna

GossUniversal

GossUniversal

GossUniversal

Folder PinsDescription

Part Number U-3140 U-7241 U-7038 K.16.6 U-3007 U-3316 U-3045 K.16.7 K.17.32 K.17.33 U-3614

Thread Size M5 M4 M4 x 0.7 M4 x 0.75 UNC 5/40 UNC 8/32 UNC 5/40 UNC 8/32 UNC 8/32 UNC 8/32 n/a

Shoulder size mm 5 5 5 5 5 5 4.5 5 4.5 4.5 n/a

Pin length 20 8 19 16 16 15.9 16 16 15.5 22 49

Pin type plain plain plain plain plain plain plain serrated plain** plain plain

Reference KBA HeidelbergWeb 8/16

MitsubishiKomori Harris Toshiba,

B.PerkinsTimson,

B.PerkinsHantschoMarinoni

B.Perkinsvarious

Harris,Goss

Goss,various Goss

Pin length

Usable lengthOverall length

Pin

diametre

Shoulderwidth

Thread lengthand type

* Available in both thin and thick needle

* Also available with reinforced pin and thin pin

Plain or SerratedPinBelow is a selection of our most commonly

supplied Folder Pins to suit *M.A.N, Harris,Goss, KBA, Mitsubishi Presses. If your Folder Pin is not listed, pleasesubmit your sample and we will identify it from our extensive database. Even special Pins canbe made to order within a shortdelivery time.

49m

m

49.2

mm

Folder Pin Keys, Pin Holders and Pin Adaptors please see page 35.

8or

10m

m

LARGESTOCK


Web Press Parts

* M.A.N., GOSS, Heidelberg/Harris, Baker Perkins, KBA, and Mitsubishi are registered Trademarks of these companies

Folder Pin Accessories Folder Pin Keys

Steel Aluminium ‘S’ Green Teflon Plastic

Available in long and short version, as wellas with magnetic heads. Please order byreference to Folder Pin size.

Pin Holders, Sleeves and PostsAll holders available for leading Press makes and models. Internal thread is provided to match anyFolder Pin requirement.

Depending on type the gripper is made fromresilient cutlery steel or high alloyed toolsteel. To improve gripping properties thegrippers can also be supplied with specialcoatings and pads

Magnetic head

*Goss type

Single & Double*KBA, M.A.N type

Square size: 3.5, 4.5 or 5.0 mm.

Gripper Fingers

Available for most *Harris, GOSS, KBAand M.A.N Presses.

Stripper Fingers

Gripper Pad

230 mm

10* Harris DFF

* MAN

*Harris

Gripper Fingers also available for *Goss,B. Perkins, Hantscho and Mitsubishi etc.

Deflection Fingers

Sheet Guides Sheet Guides

Save onOEM quality

parts!


Please refer to the CIRCULARSHEAR CUT section on pages

22 to 26 for information onDished Slitters and accessories

Web Press Parts

Upper blades are available in High AlloyTool Steels, 12% Chrome Steel, HSS, ASPand Vanadium properly hardened andmachine ground. Various bevel types canbe supplied as per the diagram below.

Anvils (Lower Blades) are available inHigh Alloy Tool Steels, 12% Chrome Steel,HSS, ASP, Vanadium, and Carbide (insert)properly hardened and machine ground.Single or double sided. Split (2 halves) andgrooved blades and collars available formost press makes and models.

Circular Blades

RollersVulkollan Rings/ Tension Rollers/ Slitter RollersRollers for paper web transport in folders and paper guides.For all major Web Press makes and models. Polyurethane,Vulkollan, Rubber and Rubber with fabric layers. Rollerscan also be supplied complete with bearings and circlipsbonded to steel or aluminium cores.

Recoating - Rollers bonded to steel and aluminium cores can be recoated with Vulkollan or Polyurethane

Upper Blades Slitters, Perforators and Creasers

Lower Blades (Anvils)

Doublebevel

Singlebevel

Singlebevel with

pre-chamfer

Singlebevel withundercut

Doublebevel withshoulder

A B C D E

!

SAVEon

OEM parts


Web Press Parts

Cutting and Transport Rollers Special Ceramic coatingKnurled finish

Folder Nip Rolls

Nip Rollers and Nip Breaks

Polyurethane Coated

with Knurled and coated finish

Rollers are made of high quality ChromiumAlloyed Tool Steels and can be supplied Knurled or with special wear resistant coating, ensuring even grip and durability. Worn coatings can be recoated.

Nip Break: Aluminium with Vulkollan

Nip Roller: Steel with Vulkollan

A unique IMI process eliminates any gap at the seams ofthe split nips. Nip Rolls are available as complete newunits or stripped and recovered. When we receive yourcores, we inspect them for any damage or distortion. The cores are grit blasted and cleaned to ensure properadhesion of the polyurethane coating. This reduces the risk in process separation of coverings.Once the coating is fully cured, the nip rolls are ground to OEM specifications.

Polyurethane coatings may be color coded to identifygain. Dynamic balancing is available upon request (to reduce vibration) this may be necessary if old coreshave been damaged.

RREEEE

PPPP AA II RRSSSS

EEEE

RRVVVVIIIICCCC

EEEE


MOVEABLE JAW BLADES

Web Press Parts

Tucker & Chopper Blades

Jaw Blades

Vulkollan® or Polyurethane coating

JAW SEGMENTSLamella springs & spot welded

or Sapphire coatedMetco, Wolfram, Ceramic

FIXED JAW BLADES

Blade. Reduce your blade costs and set-up

time by using one piece blades.

As segments, or made as ONE PIECE

JAW BLADES (spring steel)

One Piece Jaw Blade, to suit *Harris M-600 press

x1 x2 x2

Vulkollan®, Polyurethaneor Metco coating

Fixed and Moveable Jaw Blades for all makes and models of Presses,including * M.A.N., GOSS, Heidelberg/Harris, Baker Perkins, KBA, Toshiba etc.

* M.A.N., GOSS, Heidelberg/Harris, Baker Perkins, KBA, Toshiba are registered Trademarks of these companies

3rd and 4th fold

Rounded off material with transverse or longitudinal fibres. With or without bevel (subject to blade thickness). Special coatings,such as TiN available for increased performance and longer blade life.

A) Single bevel with rounded edgeB) With rounded edge

A B CTucker Blade profile

C) Double bevel

Chopper Blade profile


Web Press Parts

Ink Duct Blades

Wash-Up Blades

Alternatively with slots

Ink Duct Blades are made from special Swedish Cutlery Steel. Fastening holes and slotsare made according to OEM specifications or customer sample. All length measurementsare precision made ready to fit or can be ground to allow for subsequent machining.Blades can also be made with lasercut segments (lamella) and in Stainless Steel.

Our range of Wash-Up Blades includes Rubber/Metal,Polyurethane/Metal, Rubber, Plastic and Teflon typeblades and can be supplied as per original specifications,or modified to customers requirements. Blades can bemade with fastening holes or with fastening slots for easyinstallation. Call us for your Wash-Up blade requirementsfor all Press Makes and Models.

For more information on Wash-Up Blades, please refer to page 7.


Web Press Parts

Bearer Wipes

Foam Bars

Part # Description Reference

BB-250-004 28 x 20 x 12 mm *Harris M110C

BB-250-002 30 x 12 x 12 mm *Heidelberg Web 8

BB-250-043 38 x 35 x 15 mm, 1 hole *Harris M600

BB-250-006 40 X 20 X 20 mm, 1 hole *Harris M600

BB-250-049 42 x 12 x 12 mm *Heidelberg Web 16

BB-250-054 45 x 30 x 15 mm *Komori

BB-250-074 45 x 30 x 12 mm *Harris M110

BB-250-033 45 X 35 X 15 mm *Harris M600

BB-250-010 48 X 25 X 15 mm *M.A.N.

BB-250-072 45 X 25 X 18 mm *Mitsubishi

453T-10 55 X 45/60 X 9 mm, 1 hole *Timson

BB-250-024 58 x 30 x 20 mm, 2 holes *Harris M850/M1000

BB-0587 58 x 35 x 15 mm, 1 hole *Harris M850/M1000

BB-250-066 60 x 60 x 13 mm *Baker Perkins G25

BB-250-016 61 x 26 x 15 mm *M.A.N.

BB-250-055 62 x 46 x 13 mm *Baker Perkins G16

BB-250-023 63.5 x 54 x 10 mm, 2 holes ‘P’ *Harris M850/M1000

BB-250-057 66 x 30.5 x 30 mm, slit *KBA

BB-250-051 76 x 76 x 15 mm, 2 slots *Goss C700

Vulkollan® Foam Bars in a wide varietyof sizes, hardness, density and materialcombination. The pictured foam bars aremerely a sample of a few types available.Please contact us for all your *M.A.N.,Goss, Heidelberg/Harris, Solna, KBAPress foam bar requirements.

Most sizes available in Acid Resistant felt. Holesand slots made to requirements. Commondimensions as per table. Non standard sizescan be supplied on request, subject to minimumorder quantities.

BB-250-024 BB-250-055

BB-250-043

BB-250-066

BB-250-051

BB-2

50-0

33BB-250-010

BB-250-016

BB-250-049

BB-250-002

BB-250-054

BB-250-023

BB-228-054

BB-215-107

BB-228-052

BB-228-014

BB-228-055

Online ordering!Online ordering!wwwwww.order.order.birk-blyme.com .birk-blyme.com

See page 43 for more information.

* M.A.N., GOSS, Heidelberg/Harris, Baker Perkins, KBA, Timson, Solna and Komori are registered Trademarks of these companies

ACIDresistant


PVCBacking

BRUSH STRIPS to suit MAN* presses

HEAD STOP BRUHSES

Brushes

Part # OEM Ref. Description

Sbl-148321 16.31224-0088 112 mm long. 2 rows* Plain holes

Sbl-L132237L 16.31224-0083 112 mm long. 2 rows* Tapped holes (also16.31224-0084)

Sbl-L132235L 16.31224-0099 172 mm long. 4 rows

Sbl-L132238L 16.31224-0090 172 mm long. 2 rows

Sbl-L132229L 16.21040-0557 172 mm. Flexible 2 rows

Sbl-142142 16.31224-0107 158 mm long. 4 rows

Sbl-144636 Uniman* 140 mm long. 3 rows

Sbl-129103 16.22756-002230.22756-0102 133 mm long. 2 rows

Sbl-119315 30.21040-0003 155 mm long. 2 rows

Sbl-126663 30.21040-0100 293 mm long. 2 rows

Sbl-148524 30.21656-0005 55 mm long. 2 rows

Sbl-0903948 30.22756-0103 245 mm long. 3 rows

Sbl-59842 16.21040-0674 274.5 mm long. 2 rows

LeatherBacking

COIL BRUSHESFOLDER BRUSHES

STACKER BRUSHES

Sbl-L132235L

Sbl-L132238L

Sbl-L132229L

Sbl-142142

Sbl-L132237L*Sbl-148321*

Sbl-148524

Sbl-0903948

Sbl-129103

Sbl-119315

Above Brushes available from stock!

Heidelberg Web

Aluminium Split Core4” or 5” long to suitBaldwin Stobb.

Part 04203 & 04204

Note: This page is designed to showonly a small range of the variousbrushes we supply to Goss, MANHeidelberg-Harris, Hantscho, Toshibaand Baker Perkins presses*.For brushes not listed above, pleasecontact us for availability and/orsubmit your samples for quotation.

454462 Sbl-0838250

* GOSS, M.A.N, Heidelberg-Harris, Hantscho, Toshiba, Plamag and Baker Perkins are registered Trademarks of these companies


Web Press Parts

* M.A.N., KBA, Ferag, Motter, Tolerans, MEG, Enkel and Butler are registered Trademarks of these companies

Web Up Kites

Web Up KitesWith and without tackle line Heat-resistant drawing shields,

suitable for dryersWith magnetic film support To suit *KBA and M.A.N. Web Presses

Made in Germany

Heat resistant design

With or without tackle line

With magnetic film support

1m, 3.5m & 5m tapes

1m & 6m tapes

Water Stops

Single or Double Width Supply of individual parts or

complete assembly Save on OEM quality

To suit *Baldwin

Splicer Rolls

POLYFLEX - High tensile foam material10 Duro, Shore A Replaces all brush rollers Optional silicone, high release coating for

preventing glue, tape or ink build up

To suit *MEG, ENKEL, Butler & KBA Motter

VariousForwarding Wheels Rotary Stitchers Parts Rollers Other parts, please call!

Stitcher parts

*KBA, MAN, FERAGMotter, Tolerance

Rollers

Forwarding wheels


Date post:	23-Jun-2018
Category:	Documents
Upload:	doankhue
View:	228 times
Download:	0 times

“YOUR ONE STOP SUPPLIER” - birk-blyme.com.au · “YOUR ONE STOP SUPPLIER ... Email:...

Documents