ZDL-GSM-516-5112 Mobile Network Voice Intercom With Access ... · ZDL-GSM-516-5112 A Voice Only...

ZDL-GSM-516-5112 Mobile Network Voice Intercom With Access Control

1 | P a g e

Quick Setup Guide

ZDL-GSM-516-5112 A Voice Only Intercom Access Control System designed to use Mobile/Cell-

phone Network. System works with any GSM-Mobile Network regardless of service provider and

Network type (3G/4G). System requires no major programming or computerization, just a simple plug

and play type system setup. Accessible anywhere using your “Smart Phone”, edit/modify Tenant

Name/Contact Phone Numbers/Add-Delete Tenant Smart (Key-Fob) Card Info/Add-Delete Tenant

Entrance Unlock Code-Password and more.

5XXX-Series 5MXX-Series

Touch Key

Operation

Press Button

Operation

Key-Fob/Card Here

Key-Fob/Card Here


2 | P a g e

Safety Instructions: **Keep this instruction for future reference

**Make sure installation is completed by qualify personnel/technician

**Install this device in solid stable walls with less vibration

**Do not operate device beyond recommended temperature, humidity, power source ratings.

**Keep away from heat sources such as radiators, vents, stoves etc.

**Make sure device is well ventilated

**Do not shake, open or try to fix device (Contact authorize agent/supplier for tech-assistance)

**Keep Doorbell Camera lens away from direct sunlight (If equipped with Camera)

**Do not use strong cleaning detergent to clean device, use dry cloth for cleaning

**Do not overload outlet with extension cord as this may result in electric shock

**Do not copy, duplicate, redistribute, rewrite, alter embedded operating system as this my result in

serious litigation.

**Do not attempt to reprogram or program system without proper supervision of qualified personnel.

**Desist from going into system settings you do not know.

**Never attempt to remove system cover, screws, and other system parts.

System Operation Summary: In this present day and time, Cell/Mobile-Phones have become a major communication tool that eases

our daily life as we do way more with this tool these days. Talk, surf the internet, check emails,

send/receive text messages and many more. The question of receiving visitor’s call on your land-line or

mobile-phone is not the key issue, the issues are: Receiving those calls on the go real-time, Allow/Reject

access with a single key on the phone to unlock door, and no dedicated land-line phone required.

Designed with Mobile Network Platform in mind which technically means reliability. Its quiet certain

that it cost way less for cell-phone service at this present time compares to cost of maintaining land-line

phone service. And not just that, there are so many benefits as to why to choose this system which

includes:

1. Accessibility “Anywhere/Wherever”, Simply Press * [asterisk] Key To Unlock Door

2. Ideal for any communication application (Remote or Urban Location)

3. Takes Cable-Runs pain out of the equation

4. No limit to Communication Distance

5. 40-50-60 & More Stories Building Communication solution

6. Old Buildings Communication solution

7. Included 3-Mile Radius Antenna (Extremely Powerful)

System setup is simple, and we still continue to work towards improving every features/functions

currently available. Meanwhile, we will tell discuss available options equipped with this model in the

next pages.


3 | P a g e

System Communication Requirement:

As stated, system utilizes Cell-Phone Network to communicate with public network. Support

900/1800/1900-MHZ (2G, 3G, 4G) GSM network. A regular SIM-Card similar to the one below can be

purchased almost anywhere.

To obtain one, visit your local cell-phone retailer and ask for a “STANDARD GSM SIM-CARD”. Most

carriers offer it for only one time payment of $10, which you can activate it right away simply by loading

card with prepaid minutes (Talk-time). Depending on the carrier, prepaid 1000-Talk Minutes average

cost is $10.00. System average talk time during call defaults to 120-seconds per call.

Included Accessories:

Long Range Mobile network Antenna

8-GB Mini-SD-Card (For System Data Storage)

Programming/Updating Software (Placed Inside 8-GB Storage)

1-USB Stick Converter (With Slot For Mini-SD Card)

1-Manual User Key-Card Add-Card

Simple 1-Page Installation Instruction

15V 1.5Amp Power Supply

Mounting Bracket

System Technical Details: Communication: Mobile [GSM] 2G, 3G, 4G Network Models Available: 30-User / 50-User / 80-User / 130-User / 190-User / 250-User / 512-User / 9999-User Communication Signal Sensitivity: Much Better Than 108dBm Working Voltage: AC - 100 ~ 240 (12 ~ 15V – 1.5Amp DC) Working Voltage: 100Ma (In Standby Mode) Working Temperature: -10-Deg ~ +50-Deg-C (Approx. 10-Deg F ~ 122-Deg F) Panel Material: Stainless Zinc Alloy / Weight: Approx. 12-Ibs

Support Most GSM Network Platform Support Prepaid/Plan Service Require No Data. Only Talk/Text Required [Voice-Mail Disabled] Rings Any Phone: Cell phone/Land-Line Protective Rain-Hood Available

Mobile Service Tip: US Mobile Offer You Option To Build Your Own Service Plan. You Can View Reasonably Priced Plans By Visiting:

www.usmobile.com/plans


4 | P a g e

Initial System Assembly:

Panel consists of two parts: System Panel Mount Bracket / System Panel. System panel slide in to the mount bracket, carefully remove mounting bracket by detaching from system panel. See illustration below:

System Panel Housing Dimension

System Mounts Flush To Flat Surface/Wall


5 | P a g e

Removing System Panel From Mounting Bracket:

When detached, it will lead you to access to Main System Panel rear cover. Remove screws attached to

cover to access Main System Board (Please protect screws, Be extremely patient when performing this

process due to electro-magnetic static, and avoid touching Main Board. Be sure not to expose board to

any form of water, extreme heat, etc).

Inserting SIM-Card, 8-GB SD-Card, Antenna and other accessories will be discussed in the next page.

Exact board illustrative drawing available in next page should guide installer as to how and where to

locate SIM-Card Slot, SD-Card Slot, and Power Supply input and Antenna wiring.

*****Important

Be sure to avoid connecting or placing accessories in the wrong spot as this could lead to system

operation instability.


6 | P a g e

System Board Diagram:

**Inserting SIM-Card

SIM-Card slot is located on the top right corner (Below SD-Card slot). (Insert Card Chip Face Down)

**Connecting Antenna

Antenna SMA Female Connector is located on the top left corner (Above System Processor). Antenna

comes with 6-feet wire; you can extend cable using SMA Coupler (female to Female). This can be

obtained from your local electronic store or any online Antenna Retailer.

**Wiring System Power Supply

System comes with 1-15V 1.5Amp transformer, you can splice cable right in the middle and extend

wiring distance with 2-conductor wire to reach designated power source. If distance is less than 75-feet,

22-guage 2-conductor wire should be fine. But if distance exceeds 75-feet, we recommend 18-guage 2-

conductor wire. Thickness of this wire will maintain stable current flow for runs over 100-feet or more.


7 | P a g e

******Important Wiring Tips

It is highly recommended that you make use of included power supply. We do not recommend any third

party power supply, and if you choose to do so. Please consult system vendor to be sure that intended

third-party hardware will cause no harm/damage to system.

System Board Wiring/Connection:

****Important (Network Configuration)

Make sure to follow wiring instruction as specified above. With loaded SIM-Card on board, nothing else

should be required to link system to public network. System should search, locate and establish

connection to the closest cell tower on its own.

Link Signal Meter/Indicator is located on the upper left corner of the screen. It will display signal link

strength between tower and system. Included antenna strength goes as far as almost 2.5-miles, and it is

totally waterproof/weatherproof with magnetic base stand.

***Important*** +Linking Public Network Initial Identification by your service provider’s server actually depends on the proximity of the closest cell-tower to system location. Connecting this device to your service carrier’s network requires strong network signal to obtain successful handshake between carrier’s network and this device. If you are experiencing weak link signal, you can:

1. Take device to a different location and power on & off.

2. Relocate Antenna to higher level.

Note: You Must Tell Your Service Provider To Disable Voice Message Function. This Function Is Not Required.

Memory Card Here

Sim Card Here

E-Lock Wires Here

System

Po

we

r

Antenna Here


8 | P a g e

Electronic Lock Wiring

*****Lock Wiring Diagram Tips -5-Wire Pin Assignment: Green (NO) Blue (GND) Yellow (NC) Magnetic Locks: Mostly NC / Exit Button: White/Black.

Note: 2-Lock Model Consist Of 8-Wires 12V DC Electronic Lock Recommended. Reason: System Powers/Control Attached Lock Directly. 2-Separate E-Locks Can Be Attached To Be Controlled Simultaneously Depending On Wiring. Though, System Is Not Limited To 12VDC E-Lock Only. Various Electronic Lock – AC/DC Can Be Wired To System. But We Recommend Using A Separate Access Control Box To Integrate Any Of These Locks For Use With This System.

Other Recommendations- To Keep System Running In The Event Of Power Outage, 15V Battery Backup Will Be Required. Please Contact Your Local Dealer For More Information.

1-Lock Wiring Diagram 2-Lock Wiring Diagram


9 | P a g e

Electronic Lock Wiring


10 | P a g e

System Main Menu:

Now that all required accessories like: SIM-Card, SD-Card, Antenna, Power Supply and E-lock (If needed)

have installed, the next step will be to power system on. System will conduct self-check each time it

powers on/off. A “Welcome” screen displays, then system “Status” screen follows: Status Screen should

display “Welcome” on top with operating instructions at the bottom as shown below. **Note: Screen

dims down (Standby Mode) after approximately 10-seconds.

**Main Screen Display Instructions

*Dial:

Means, visitors/guests can enter 3-4-digit apartment number at anytime and pressing # to dial.

*Unlock:

This feature is intended for tenants with authorized assigned CODE to gain access to the building by

simply pressing * to access code input screen. Upon display, input 6-digit assigned CODE and press # to

unlock Electronic Lock. ***Note: Default Administrative Unlock Code Is: 123456

*Menu:

By pressing #, you will be navigating to 3-major areas of which two is mainly visitors/guest features.

****Important Tips!!! Make Your Selection Using Menu Number: Instruction (1), Query (2) etc.


11 | P a g e

System Menu Details

***** Navigating System Menus:

# - To Confirm Your Selection / * - To Go Back/Exit / 1 – To Scroll Down / 7 – To Scroll Up

Instructions (Option-1)

**Instruction: Information about how to place calls. **Information on how to unlock e-lock with Code

Query: (Option-2) User Search (Residents) / Display All Users (Residents)

**Query: Visitors/Guest can easily locate resident in the building using this menu. There are 2-ways

visitors can search resident directory, either to search using Selection-1: Query User: Or by using the

keypad to enter tenant’s User Name (Keys Consist Of Letters/Alphabets). Selection-2: Display All Users

(Residents): Easiest way to view Tenant’s Directory. Screen displays every single resident listed in the

directory. (Note: Press 7: To Scroll Up, 1 To Scroll Down, # To Confirm Selection, * To Exit)

Set Up: (Option-3) (Main System Programming Menu Gateway)

System Main Programming Menu

***Requires Administrative Password/Code To Access System: Default Is: 123456

***Editing Tips

To Edit Password Set: Press-1 [Edit Admin Password], System Set: Press-2 [Edit System Operation

Settings], User Set: Press-3 [Input/Edit User Information], Capacity Set: Press-4: [Upgrade System],

Guest Photos: Press-5 [Snap-Shot Retrieval – N/A], Guest Video: Press-6 [Video Event Retrieval – N/A]

To Exit: Press # [Enter Your Selection using Front Keypad]


12 | P a g e

System Main Programming Menu Cont’d

**Password Set: (Option-1)

(Note: Editing Password Set: Press-1, System Set: Press-2, User Set: Press-3, Capacity Set: Press-4 etc)

Press 1 to enter this menu. This is where you can edit Administrative Password, Administrative E-Lock

Code, and Enable/Disable Administrative E-Lock function.

**Administrative Password Tips

Default System Admin Code Is: 123456

Default Admin unlock Code Is: 123456 [Admin Unlock Process: Press [*], Enter Room Number [Default: 0000], Press [#]. Then 123456 + [#] *To change admin password/code: Press 1, enter new 6-digit password (Numbers Only). Re-enter to confirm password. System will authenticate changes by indicating “DONE”. Same process apply to admin unlock code. *Disabling Unlock Function: Automatically disables admin unlock password to function.

**System Set: (Option-2)

This section consists of questionnaire about how you choose to have system function during operation.

You can edit system Talk Time (Communication Length), Microphone Volume, Speaker Volume,

Preferred Event Archive Mode, Maximum User Capacity Setting, Date/Time/Year settings.

To edit Talk Time, Press 1. System accepts time range between 1 To 3-Minutes, enter using keypad.

To edit Microphone Volume, Press 2. System accepts volume range from 0 To 6. Key-in your choice.

To edit Speaker Volume, Press 3. Volume range is 0 To 7, enter your option

To edit Preferred Mode, Press 4, Option to Capture Visitor’s Photo or Video

(Note: Photo Capture / Video Recording Not Available In This Model).

Editing Capacity, Press 5 and enter System desired capacity (User Capacity Can Not Exceed Specification)

Editing Date/Time/Year, Press 6 to change current settings. Enter hour (Military Time format

recommended), enter minutes and Press # to skip to Year/Month/Date. Press # again to confirm.

****Navigating Setup Menu: Enter Menu Item Number To Select Menu, Press # To Exit


13 | P a g e

User Set: (Option-3) Editing (Residents/Tenants Setup) You can navigate to this menu anytime by pressing [#], enter [3] using keypad to access Setup Gate-

keeper. And of course, it will demand admin password which will be [123456] [Modifiable By Pressing

Option-1 Of The Programming Menu] to grant access. Option-3 should put you directly into User

Editing (Residents/Tenants) menu.

Under this menu, you will be able to setup/edit: Building Guard Post Information (Option-1), Building Residents/Tenants Information (Option-2), Query/Look Up Tenant Record/Information (Option-3), User/Tenants Unlock Code Length (Option-4), Entrance Guard (Smart Card/Key-fob Operation Menu) (Option-5). Quickest Way To Go Is: Enter Your Info As The System Administrator [Guard] – By Simply Inputting Your Phone Number. *Editing Guard Phone (Building Guard Info Registration) (Option-1) Press [1] to access Guard Menu.

(Note: System Defaults Guard Room Number To: 0000, Which Can Not Be Modified. System accepts up to 3-Phone Numbers which will be dialed after one another if no answer. You can choose to use this feature as “Method Of Reaching Building Management”. When done, press [*] to Go back to Menu List and select Option-2 to start entering resident’s information. *User/Residents Phone (Building Tenants Info Registration) (Option-2) Press 2 to access User Phone Card Menu. Before entering tenant’s information, we recommend typing/writing up your resident list in alphabetical order. This way, each tenant will have their own unique “INDEX NUMBER” which system will need for quick searches/query. This number format could be 01, 02,03,04,05 etc as 2-tenants/user can not share

same index number. To start the registration process, enter INDEX Number and Press # !!!!Important!!!! Speed Up process by just entering Index-#, Tenant’s 4-digit Room Number, First Initials of Tenant’s Name & Phone Numbers. [You Can Complete/Modify This Info With Your Cell-phone Later – Please Refer To Pages-17 Thru 19] ***Note:

For Security Reasons, System Defaults To Time-Out In Approx. 15-Seconds. You Can Easily Get Back Here

Following These Steps: Press #, Option-3, Enter Password, Option-3 & Option-2 For Menu.

Option-2 will request for index number, enter “INDEX NUMBER” and press [#] to confirm (Will Prompt If

Number Exist Already) (Be sure not to duplicate index number). Index Number confirmation will lead

you to Main User Form Card where you will be required to enter: Tenant Name, Room Number, Phone

Number-1, 2 & 3.

****Editing Tips:

Enter Letters/numbers Using system Keypad, Press # To Move Between Fields & Confirm, Use * To

Make Corrections Or Allow System To Time-Out


14 | P a g e

Query/Look Up Tenant Record/Information (Option-3)

After entering all user/resident data, this is the menu you can view User/Residents information by Room Number. And to perform this task, just enter User/Resident’s 4-Digit room number and press # to view. Moreover, Tenant’s Index Information can be Edited/Modified anytime. This menu allows you to view

and confirm changes made to: Name, Index Number, All Phone Numbers on file. Making changes to

existing Records On File is relatively easy. Just follow steps below:

Making Changes To existing Records:

On the main screen, Press [#] to access Setup Menu (Option-3). Enter Admin Password, and select User

Set (Option-3) which will lead to User Setup Menu. Select User Phone (Option-2) and enter the Index

Number of the record you like to edit/modify. System will prompt “Same Index Exist” Press [#] to

continue with Editing/Modification or [*] to cancel.

Pressing [#] will provide new blank “Form Fields”, enter new information you like to replace this

existing record with, and press [#] to confirm it. Once confirmed, newly entered information will surely

replace whatever on file before hand. And you can easily verify this by navigating to Query/Look Up

Tenant Record/Information (Option-3) under User Set.

Code Length: User/Tenants Unlock Code Length (Option-4)

You can Edit/Modify Tenant’s Access Code DIGIT Length in this menu. This code is mainly for Tenant’s

use. Especially if premises entrance is locked at all times with an Electronic Lock, tenant’s assigned these

codes can unlock the Electronic Lock to gain access to the premises.

Option to keep code length either at i-digit or 6 will be up to system administrator. System default code

length is: 2 ~ 6-Digits, default maximum code length is 6-digits – [Default Unlock Code: 123456]. This

means, system administrator can assign 2, 3, 4, 5 and no more than 6-digits for use.

Entrance Guard (Smart Card/Key-fob Operation Menu) (Option-5)

Smart Card/Key-Fob related programming/registration can be quickly processed in this menu. Menu

consists of: Registered/Registration (Option-1), Delete (Option-2), Empty (Option-3), Read The card

(Option-4).

Key-card/key-fob assignment/programming on this machine is really simple and straight forward.

However, key-cards can be assigned or issue to tenants in 2-diferent ways: Blind Assignment / Attached

Assignment. This simply means Key-Cards assigned with and without records. How to achieve both

methods will be discussed later as knowing how each menu functions should come first.


15 | P a g e

Registered/Registration (Option-1)

We made mention of 2-methods of assigning key-cards in the previous page. Yes, if you would like to

know which tenant with specific key-card, attached assignment will be recommended. What this means

is: Assuming you have a valid physical Tenant List (With Index Number Created), Name, Room Number

etc. Just follow these steps before turning over Key-fobs to each tenant.

**Verifying Card Number

Use the Read The Card feature (Option-4) of Entrance Guard Menu. You can easily navigate to this menu

by following these steps: Press [#] to access Setup (Option-3), enter admin password, and select User

Set (Option-3) which should lead you to Entrance Guard (Option-5), and finally select Read The Card

(Option-4). Swipe new Key-Card right on where it says “CARD” on the panel, system will read and

display “Encrypted Card Number”. Simply write this number next to designated to hold the card.

And if you believe this process may be too complex, you can order one our “Desktop Card Reader” to

use in conjunction with system software to get this rolling within very short time.

But if you choose not to go that route, and choose to issue Key-cards blindly instead, just follow these

simple steps:

**Issuing Key-cards On The Go

Press [#] to access Setup (Option-3), enter admin password, and select User Set (Option-3) which

should lead you to Entrance Guard (Option-5). Then select Registered (Option-1) as system will prompt

“Please Read Card”, swipe the new cards right away and you can swipe as many cards as possible in this

mode.

Delete (Option-2)

To DELETE specific Key-Card, this is your option. Specific Key-Cards can be deleted using actual

“Encrypted” keycard chip number.

Empty (Option-3)

This menu DELETES all Key-Card records with no prejudice (Purge). All Key-cards will be required to be

Re-Programmed after performing this function.

Read The card (Option-4)

Display Key-cards “Encrypted Numbers” when swiped to read. Best way to verify card information on

the fly.


16 | P a g e

Capacity Set: (Option-4) (Editing Number Of User Supported)

This menu is mainly for future system upgrade. Upgrade to support system expansion and other user

features. Menu currently defaults to prevent editing by System administrator/Users. For more

information, please contact your system vendor.

Guest Photos: (Option-5) (Not Available In This Model)

Guest Video: (Option-6) (Not Available In This Model)

Included Software Information:

Software Operation Summary (Runs With Windows OS Only – Better With Win-XP/Vista/7/8)

As stated previously according to included accessory list, 1-Removable 8GB Mini-SD Card included

purposely for 2-major reasons.

*Store/Protect (User/System Data)

*Stores User Editing/Updating Software Application

It is highly recommended to make sure this card remains in the system at all times to keep your data

fresh. Any changes made directly on the system automatically stores on this storage for later retrieval.

Alternatively, Editing/Modifying User Data, User Password, Room Number, User Phones and more

could easily be completed by following steps below:

Remove Mini-SD Card from system board to insert into PC/Laptop SD-Card Slot. Or use with included

USB To Micro SD-Card Converter to edit data. Some PCs automatically load and display files and folders

available in this drive. If not, Click START and select COMPUTER. New storage should show up among the

list of storage available in the DRIVE MENU. When you open the new storage, you should find the

following folder:

*DAEZEN* - [Open & Launch Daezen_GSM Application Software]

*Note: You Might Need Winrar/Winzip File Extractor To Convert Application Files {Only If Required] This program should launch right away except if your computer “Security Software” prevents it. Please contact your pc/laptop OS/Security software vendor for support. !!!! Important You must have Admin-User permission in your laptop/pc to complete this install. And to do this, right click on the executable file to run as administrator.


17 | P a g e

Software Installation Step Continuation:

That pretty much conclude the install, and the next step will be to start populating the “Form Fields” as shown below. Click “New” to begin: Form Field Information: ID [Index Number] Room No. [4-Digit Apartment Number Name [Resident Name] Phone No.1, 2, 3 [Residents 1st To 3rd Phone Numbers-Add 1-Before Area Code] Password [User Unlock Password].

Software Application Screen Shot

Existing User details on SD-Card should populate form fields [If Any Data Exist]. You can change/add-

new/delete user records. Update/Change User Phone Numbers; Unlock Password, Index Number, Room

Number etc.

When done, just click DONE to save information, and simply take SD-Card back to the system.

***Important

We recommend Powering Down System before Re-Installing Mini-SD Card. Do Not Forget To

Re-Attach Panel Screws. Note: Mini-SD Card Installs Facing Down Inside Card Slot. For

Trouble-Shooting, Please Contact System Vendor For Immediate Technical Support.


18 | P a g e

Easiest way to make changes to system records without any physical presence: You can modify/edit

existing records like: User Information, User Unlock Code, General Unlock Code, User Key-Fob/Smart

Card Add/Delete, and User Records Deletion.

Very Important: You Must Be Setup As The System Administrator To Perform This Function:

To enter your information as “System Administrator”,

On the main screen, Press # to access Setup Menu (Option-3). Enter Admin Password, and select User

Set (Option-3) which will lead to User Setup Menu. Select Guard Phone (Option-1).

Default Guard Room Number Is: 0000

(Note: Intended To Represent Management Contact Information)

Menu allow up to 3-Adminstrator Phone Numbers, all phone numbers entered will be able to access,

modify/edit system user information anytime anywhere as long as you know system Contact Phone

Number and Administrative Password.

In case you forget System Phone Number, just dial [0000] using system keypad. Your Phone Caller-ID

should show you incoming call information.

Contacting System To Edit/Modify User Settings:

You can easily contact system using any “Messaging – Text/SMS” APP. Simply send your requests to

system by entering the following commands:

Note: Your Phone Number Must Be Included As Administrative Contact Numbers (Guard Phone)

Editing User/Tenant Name:

Type: 02*# + 4-Digit Room Number + # + Tenant Name

Example: 02*#0101#John

(02*# Is The Command, 0101 Is The Room number, John Is The Tenant Name)

Then, send “Text/SMS”. Allow about 15-20-seconds for system to respond, and system should confirm

changes.

Modifying/Editing System Data Remotely

With Mobile/Cell-phone


19 | P a g e

Modifying/Editing System Information Using Mobile/Cell-phone:

Editing User/Tenant Phone Numbers:

System allow up to 3-different phone numbers for each tenant. Each phone number can be modified

one at a time. And to do this, follow these steps:

Type: 03*# + 4-Digit Room Number + # + New Phone Number (Example:17029991212)

Example: 03*#0101#17029991212

(03*# Is The Command, 0101 Is The Room number, 17029991212 Is The Tenant Phone

Number)

{03*# - Is For First Phone Number}

{04*# - Is For Second phone Number}

{05*# - Is For Third Phone Number}

Editing Administrative Public Unlock Code/Password

Type: 00*# + New Code/Password (Default Code/Password: 123456)

Example: 00*#112522

Assign/Edit Tenant Unlock Code/Password

Type: 01*# + 4-Digit Room Number + # + New Code/Password (6-Digit In Length)

Note: You Must Create Unlock Code Using Included Software First Before You Can edit With Cell phone.

(01*# Is The Command, 0101 Is The Room number, 112244 Is The Tenant New Unlock

Code/Password)

Edit/Modify: Add/Assign & Delete Tenants Key-Fob/Smart Key-Cards:

Deleting Existing Key-Card (s)

Type: 06*# + Room No. + 12-Digit Key-card Number (Example: 06*#+0101#+0004205204)

Note: 12-Digit Card Number Can Be Found On Card, If Not Up To 12-Digit Add 000 To Make it

12-digit). Or you can navigate to “Entrance Guard”, and select option-4 to read key-card.


20 | P a g e

Editing/Modifying Existing Key-Card (s)

Type: 07*# + 12-Digit Key-card Number (Example: 07*#0004205204)

Note: 12-Digit Card Number Can Be Found On Card, If Not Up To 12-Digit Add 000 To Make it 12-digit)

Deleting User/Tenant Record/Information

Type: 12*# + Tenant Room Number (Example: 12*#0104) (Note: Index, Room, Username, Phone

Number Will Be Deleted)

*******Important!!!!

We will notify you whenever new “Free System Update” becomes available.

00*# [Admin Public Unlock Code Editing] 01*# [Tenant Unlock Code Editing] 02*# [Tenant First/Last Name Editing] 03*# [Tenant First Phone Number Editing] 04*# [Tenant Second Phone Number Editing] 05*# [Tenant Third Phone Number Editing] 06*# [Delete Current Tenant Key-Card] 07*# [Modify Tenant Current Key-Card] 08 – Undefined 09 – Undefined 10 – Undefined 11 – Undefined 12*# [Delete User – [Removes index, room, name, phone, unlock all forms]

*System Text/SMS Command Reference Table*


21 | P a g e

1. Does Sim-Card insert facedown or up?

Sim Card must be inserted facedown

2. Why is memory card included?

To store/maintain system information

3. System will not connect mobile network, why?

Be sure to activate service associated with your new sim card. Prepaid/Plan Sim-Card comes

with telephone number, try calling this phone number to make sure number works. If

working, Service carrier’s system will prompt you to setup your voicemail and more.

Initial “Handshake”, refer to as “Device Registration” to carrier’s network requires steady

strong link signal. This process takes about 5-10 seconds if connecting this device to any public

network for the first time. If experiencing weak signal in current location, move system away

to a different location (Where Your Cell phone Works Better). Power system off & on, and try

calling phone number assigned to system.

4. How do I contact system from my smart-phone?

Simply by “Text/SMS”. Enter commands as illustrated in:

“Modifying/Editing System Information Using Mobile/Cell-phone” Just follow each editing steps.

5. Are system parts available for replacement?

Yes, please contact your vendor for more information

6. Screen suddenly display the following message:

[New SIM 1 Voice-Mail]

Means voice message (s) waiting to be heard.

Solution:

Please contact your service provider to disable

“Voice Mail” function. Once done, power system

Off/On to clear screen.

-------------------------------------------------------------------

*Frequently Asked Questions*

*Frequently Asked Questions – Cont’d*


22 | P a g e

*****FAQ - Continued Next Page*****

*****FAQ – Continued*****

7. Adjusting attached Electronic Lock “Delay Time”

8. What should I do if something suddenly stops working in my system? There is absolutely no reason to worry about replacement parts for this system. Parts like keypad, reader, screen, boards [System + Reader] are readily available for immediate replacement. Please contact your dealer to get this replacement parts.

9. Tenant Unlock Code not registering, why? User-code must be created using included software first. After this, you will be able to modify/edit or delete individual code via cell-phone.

10. I have a Gate Opener; will this system open/close the gate? Absolutely, system puts out 12 to 15V DC to push. Please ensure your gate opener requirement falls within the stated push power.

11. We have 2-Gates/Doors in our building, what will be required to control both? We have a model that easily supports this function. Please look for the “2-Elock Control Series” to resolve this issue.

12. I have an existing E-Lock that works; do I need a new one? New lock will not be required as long as it is a DC type lock. And, no separate power will be required to power lock. Please see pages 8 thru 9 to view electronic lock wiring diagrams.

13. I will be mounting this system outdoor, what will I need?

You might want to consider the: ZDL-HGSM5M Weather-Protector Hood More Information will be available if updated

Turn Anti-Clock-Wise To Extend Lock Delay Time

Date post:	29-Jul-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

ZDL-GSM-516-5112 Mobile Network Voice Intercom With Access ... · ZDL-GSM-516-5112 A Voice Only...

Documents