BB-9200 / BB-9300 / BB-9050BB-9200 / BB-9300 / BB-9050 MegaExo Crankset MegaExo Crankset Service Instructions Service InstructionsService Instructions
Congratulations on your Full Speed Ahead product. Please read these instructions and follow them for
correct use. Since specific tools and experience are necessary for proper installation, it is recommended
that the Crankset be installed by a qualified bicycle technician. These instructions and instructions for
other FSA products are available for download at http://www.fullspeedahead.com/techdoc
Warranty
Full Speed Ahead (FSA) warrants all FSA, Gravity, Vision, and RPM products to be free from defects in
materials or workmanship for a period of two years after original purchase unless otherwise stated in the full
warranty policy. The warranty is non-transferable and valid to the original purchaser of the product only. Full
warranty policy is available at www.fullspeedahead.com
Contact
If you have questions, please visit our web site contact page at :http://www.fullspeedahead.com/contact
Specification
Item Number / Model Name BB-9200 / 9300 MegaExo Ceramic Bearing BB for K-Force Light MTB
BB Shell 68mm English (BC1.37”) or 73mm
Item Number / Model Name BB-9050 / MegaExo Steel Bearing BB for SL-K MTB
BB Shell 68mm English (BC1.37”) or 73mm
Alloy Shell Spacers for MTB MegaExo Components
Follow the assembly order in the illustration:
ⓞ Bottom Bracket (BB) Shell
① Center Sleeve x1
② Right BB Cup x1
③ Alloy BB Cup Spacer x3
④ Left BB Cup x1
⑤ Right Crank Arm x1
⑥ Wave Washer x1
⑦ Left Crank Arm x1
⑧ Crank Bolt x1
Crankset Installation
Follow the assembly order in the illustration:
1. Ensure that the BB shell threads are clean from machining chips, dirt, dust etc.
2. Install the R. Bearing Cup ②, Center Sleeve ① and correct BB Cup Spacer(s) ③ as
required. Tighten the cup to 400-500 kgf.cm / 40-50 Nm / 354-443 in.lbs. (Use FSA
MegaExo cup tool part no. E0139)
Revision Date 19-Feb-09 www.fullspeedahead.com ZS078-v0 Page 1 of 2
MTBBB
Size
BB mountedderailleur
or chain-guide
L.Spacer
R.Spacer
68 no x1 x268E yes x1 x173 no x0 x1
73E yes x0 x0
3. Install the L. Bearing Cup ④ and Alloy Shell Spacer ③ as required. Tighten the cup to 400-
500 kgf.cm / 40-50 Nm / 354-443 in.lbs
4. Gently and completely insert the R. Crank ⑤ through the R. and L. Bearing Cups.
5. Install the Wave Washer ⑥ onto the axle.
6. Install the L. Crank Arm ⑦ onto the axle. Tighten the Crank Bolt ⑧ to 450-550 kgf.cm / 45-
55 Nm / 390-485 in.lbs
7. Install the M27 Self-extracting Bolt Cap and washer (Use FSA tool part no. EE023)
Full Speed Ahead, USA
12810 NE 178th St. Suite 102
Woodinville, WA 98072
Tel: 1_425_488_8653
Fax: 1_425_489_1082
Full Speed Ahead, Europe
Via Del Lavoro, 56
20040 Busnago, Milan, ltaly
Tel: +39_039_688_5265
Fax: +39_039_682_3336
TH INDUSTRIES / FSA Asia
487 Ko-Chung Rd. Ta-Li City 412
Taichung County, Taiwan
Tel: +886_4_2406_8641
Fax: +886_4_2406_8076
Revision Date 19-Feb-09 www.fullspeedahead.com ZS078-v0 Page 2 of 2