20,000 PSI - Metco Industrial

P/N 29390 Effective 02/2015© 2015 Jetstream of Houston, LLC. All rights reserved.

Jetstream® and UNx® are registered trademarks of Federal Signal. Federal Signal is listed on the NYSE by the symbol FSS. Specifications and equipment listed are subject to

change without notice. Some photos are shown with optional equipment.

20,000 PS

I (1,379 BA

R) P

RO

DU

CT

CA

TALO

G

20,000 PSI1379 BAR

Product Catalog

A Growing Nationwide Network of Service Centers

FS Solutions centers bring key resources closer to home.

• Expert safety and applications training

• Rental equipment• High-performance parts• Waterblast accessories• Equipment rebuilding• Used equipment sales

®

Leeds, AL - 800-822-8785

Gonzales, LA - 225-647-0660

Highland, IN - 219-924-3180

La Porte, TX - 281-674-8668

Lexington, SC - 803-996-0741

New Brunswick, NJ - 732-448-7830

Toledo, OH - 888-415-RENT

Long Beach, CA - 866-515-9891

Lakewood, WA - 253-584-0653

Williston, ND - 701-572-7425

Jetstream of Houston, LLP5905 Thomas Rd. • Houston, TX 77041

Phone: (832) 590-1300 • Fax: (832) 590-1304 • Toll Free: (800) 231-8192

www.waterblast.com

Worldwide, thousands of contractors, plants, municipalities, and the military turn to Jetstream for our comprehensive offering of industrial, high-pressure waterblast equipment, parts and accessories. These demanding customers keep coming back to Jetstream year after year for the superior performance of our products and the unmatched technical support and customer service available to them day and night.

Count on Jetstream for the products and value-added services that make the difference!

• Waterblast equipment up to 40,000 psi (2750 bar)

• Thousands of high-quality parts and accessories in stock and available for same day shipping (see below, right)

• 24/7 Support Program (see right)

• Comprehensive web site (www.waterblast.com)

• High-caliber sales team and distribution network offer unmatched expertise in products and applications to provide the best solution for any job

• Start-up training on all new equipment — see Right Start Program page A-5

• Fully staffed engineering and R&D departments

• Innovative UNx® Fluid End — up to 40,000 psi (2750 bar) with upgrades available for most popular pumps, including NLB, Butterworth and Woma

We’re there anytime you need us!Shutdowns are expensive endeavors, and plants choose contractors that they can rely on to work around-the-clock to minimize production downtime. When problems arise, or a part is needed, it can’t always wait until the next day! That’s why Jetstream is available day and night, seven days a week. The 24/7 Support Program provides Jetstream customers a competitive advantage with uninterrupted access to critical parts and accessories*, service and expertise to keep the job running.

713-302-7718 24/7 SUPPORT HOTLINE

Fast order processing!Jetstream is driven to provide an edge to our customers. Among the most important value-added advantages Jetstream offers is access to a huge inventory of high quality parts and accessories and a customer-focused team to ensure that the products get where they need to be, when they need to be there. Over 90 percent of all orders** ship the very same day.

* Additional charges apply to after-hours order fulfillment** Applies to orders received by 3:00 p.m. US Central Time

I

Your Waterblast Solutions Provider

Call us today or visit our web site at www.waterblast.com Jetstream of Houston, LLP.A division of Federal Signal Corporation5905 Thomas RoadHouston, TX 77041

(832) 590-1300 — Phone(832) 590-1304 — Fax(800) 231-8192 — Toll Free(713) 302-7718 — 24/7 Hotline

Office Hours: Monday-Friday7:00 am to 6:00 pm (US Central Time)

Other Environmental Solutions Group companies include:

Guzzler Manufacturing is the world's leader in industrial vacuum loaders for use in cleaning up industrial waste and recovering and recycling valuable raw materials. With the widest range of offloading options available, Guzzler products are designed to vacuum a full spectrum of materials – from solids and dry bulk powders, to liquids, slurries, and thick sludge – in such industrial areas as cement plants, steel mills, railroads, oil refineries, chemical plants, foundries and power-generating stations.

www.guzzler.com

www.waterblast.com

www.elginsweeper.com

www.vactor.com

Elgin Sweeper products are the sweepers of choice for a variety of general street maintenance, special industrial and airport applications. With more than 100 years of experience, Elgin Sweeper offers municipalities, contractors and industries the most sweeper options in the country, using the latest sweeping technologies—mechanical, pure vacuum, regenerative air, alternative fuel and waterless dust control.

Jetstream has been recognized as a leading manufacturer of waterblast systems, pumps, accessories and replacement parts for over 30 years. Our proven product performance is driven by continuous R&D and supported by a dedicated engineering team and a world-class manufacturing operation.

All critical components are manufactured in-house to the highest quality standards. Parts are 100 percent inspected and performance tested before shipment to the customer. With a huge parts inventory, multiple service locations, and factory-trained technicians worldwide, every Jetstream customer has the highest level of support needed to achieve optimum productivity morning, noon and night.

Jetstream is an integral member of the Environmental Products Group within Federal Signal Corporation. This alliance affords Jetstream unlimited access to an expanded range of resources and expertise, including engineering, materials, testing, manufacturing and quality control. More importantly, it provides contractors and other market segments with access to a broad range of industry-leading environmental products from a single, reliable source.

The leader in sewer and catch basin cleaners for nearly 50 years, Vactor Manufacturing produces a wide range of combination sewer cleaners and jetters for sewer line maintenance, as well as a range of robust vacuum excavators, featuring innovative technology and custom configurable designs.www.vactor.com

UNITSX-Series Units ................................................A-1Hydroforce™ Units.........................................A-2Electric & Custom Units ................................A-2Product Training ............................................A-3Automated Waterblasting Solutions ..............A-4

PUMPS & FLUID ENDSPump Features and Benefits .........................B-1Bareshaft Pump .............................................B-2UNx Fluid End Features and Benefits ...........B-11UNx Fluid End ...............................................B-12UNx Fluid End Upgrades ...............................B-15

PUMP ACCESSORIESSpare Part Packages .....................................C-2Tools ..............................................................C-3Diverter Valve

Air-Operated (Dump) ................................C-4Air-Operated (Shut-In) ..............................C-6Electric ......................................................C-7Hydraulic ..................................................C-8

Bypass Valve .................................................C-9Regulator Valve .............................................C-10Multi-Gun Valve (MGV) ..................................C-11Multi-Unit Manifold (MUM) ............................C-12Hydrostatic Test Valve (HTV) .........................C-1320K Check Valve ...........................................C-15Nozzle Shut-Off Valve (NSOV) .......................C-16Rupture Disc Holders ....................................C-17Relief Valve ....................................................C-18Hydro-Throttle Controls .................................C-19Filters .............................................................C-21Pressure Gauge .............................................C-23

HOSES & LANCESFeatures .........................................................D-1Thermoplastic Hoses ....................................D-2Flex Lances ...................................................D-3End Fittings ...................................................D-5Rigid Lances ..................................................D-7

FITTINGSFeatures .........................................................E-1Thread Lubricants .........................................E-1Port Adapters ................................................E-2HHP High Pressure Adapters ........................E-5Quick Disconnect Adapters ..........................E-6Type M ...........................................................E-9Medium Pressure ..........................................E-10Gland Nuts, Collars, & Plugs .........................E-13Anti-Vibration Gland Assemblies ...................E-13Nipples ..........................................................E-15Lance Close Nipples .....................................E-16Slimline Couplings .........................................E-17

GUNSFeatures .........................................................F-1DuraSafe™ Hand Guns

Dump Style ...............................................F-2Shut-In Style .............................................F-4

Zero Thrust Hand Guns .................................F-6DuraSafe™ Foot Guns

Dump Style ...............................................F-7Shut-In Style .............................................F-8

NOZZLESFeatures .........................................................G-1Orbi-Jet QCX .................................................G-2Orbi-Jet .........................................................G-6HP Surface Cleaning Nozzles ........................G-8Rotomag ........................................................G-10Pipe Cleaning Nozzles ...................................G-15Tube Cleaning Nozzles

Tube Spinners ...........................................G-17HPF-HPE-HPM Overview .........................G-18HPF ...........................................................G-20HPE ...........................................................G-21HPM ..........................................................G-22

Abrasive Cutting Nozzle ................................G-23

D

B

C

E

G

A

F

SYSTEM

Tube & Pipe Cleaning Systems .....................III

Surface Cleaning System ..............................IV

II US & Canada: 800-231-8192 or 832-590-1300

TABLE OF CONTENTS20,000 PSI

NLB, Butterworth, Gardner-Denver, Woma, Turtleskin, Blue Goop, Loctite, Cordura, Tritan, Weatherford, Wheatley, and American Aero are trademarks and/or registered trademarks of their respective companies. Jetstream disclaims any and all rights to these marks. Jetstream reserves the right to suspend or discontinue the sale of any product contained herein or perform any modifications to product design without prior notification.

I

H

J

SAFETYFeatures..........................................................H-1Visual Safety System......................................H-2Shrouds..........................................................H-3Covered Safety Whips....................................H-4Flex Lance Safety Grip...................................H-4Safety Tools....................................................H-5Personal Protection Equipment......................H-8Safety Accessories.........................................H-12Safety Tape, Signs And Decals......................H-13Hose Checks..................................................H-13

TECHNICALUnit Conversions & Formulas ........................I-1Connection Types ..........................................I-2Pressure Drop Data Charts ...........................I-7Threading and Coning Tools .........................I-10

INDEXPart Number Index ........................................J-1Product Index ................................................J-4

IIIwww.waterblast.com

TABLE OF CONTENTS20,000 PSI

IV

SYSTEM20,000 PSI

US & Canada: 800-231-8192 or 832-590-1300

TUBE CLEANING SYSTEMJetstream offers a full line of ultra-high pressure tube cleaning tools. Tools include rigid and flexible lances and automatic lancing machines—all designed for safe, efficient cleaning of boiler, exchanger, and condenser tubes.

JETSTREAM X-SERIES UNITSPAGE A-1

AUTOMATED RIGID LANCE CLEANING

MANUAL RIGID LANCE CLEANING

FLEX LANCE CLEANING

SAFETY APPARELPAGE H-7

RIGID LANCESPAGE D-7

NOZZLESPAGE G-1

FLEX LANCE SAFE GRIPPAGE H-5

DCF-20 FOOT GUNPAGE F-7


RIGID LANCESPAGE D-7

RIGID LANCE HOLDERPAGE E-16

FLEX LANCESPAGE D-3



HOSESPAGE D-1

V

SYSTEM20,000 PSI

www.waterblast.com

SURFACE CLEANING SYSTEMSSingle Gun ApplicationsThe proven productivity and safety of Jetstream’s DuraSafe™ Control Guns provide highly efficient, cost effective surface cleaning in a variety of applications.

JETSTREAM ELECTRIC UNITSPAGE A-2

DURASAFE HAND GUNSPAGE F-2


SAFETY SHROUD ASSEMBLYPAGE H-3

A-1 US & Canada: 800-231-8192 or 832-590-1300

Units20,000 PSI

UN

ITS

MODEL 4220

COMMON ENGINE POWERS

PUMP DISPLACEMENT* at 20,000 psi (1,379 bar)

hp kW gpm lpm

250 186 18.2 68.9

325 239 25.2 95.4

MODEL 3620

173 129 12.9 48.8

MODEL 3020

80 59 6.2 23.5

125 93 9.7 36.7

X-SERIESFrom the innovative UNx pump down to the EZ-Lube wheel bearings, every detail of the X-Series was engineered to minimize maintenance and provide contractors with the most productive and versatile waterblaster on the market today.

• 80 to 325 hp (59 to 242 kW) high performance diesel engines

• Pro Clutch and covered belt drive

• Guardian Waterblast Filtration System extends component life and increases uptime

• Available as a skid or low profile trailer with balanced weight distribution for controlled towing

• State-of-the-art controls

◆ Hydraulic or electronic throttle control

◆ Hand-adjustable bypass valve

◆ Shutdown system to protect equipment

X-sERiEs

Jetstream waterblasters are available in a wide selection of standard models with nearly limitless options for customization to suit specific needs. All Jetstream waterblasters employ UNx Fluid End technology for superior performance, greater flexibility in the field, and reduced downtime and maintenance (see page B-11 for details).

UNITS HORsEPOWER CHARt

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.

A-2www.waterblast.com

Units20,000 PSI U

NIT

S

ELECtRiC Units

DUAL PUMP Units

ELECTRIC UNITSJetstream manufactures several models of electric waterblasters for in-plant installations configured to user requirements.

• 60 to 300 hp (45 to 223 kW)

• TEFC or explosion proof motors

• Soft-start or VFD starters

• Stationary skid

CUSTOM UNITSIn addition to a wide selection of standard units and options, close collaboration between Jetstream solutions providers and engineers provide almost unlimited custom options to meet specific needs. Common requests include:

• Custom trailers and skids

• Special control devices (pneumatic, electronic, hydraulic)

• Customizable to meet special plant requirements Jetstream can build the perfect unit for any job

HYDROFORCE™ UNITSJEtstREAM OiL & GAs EQUiPMEnt

In the oil and gas industry, hydrostatic testing has always been a primary function. Jetstream strives to provide not only HydroForce™ waterblasting units with pressures up to 20,000 psi, but a complete solution with the assorted tools needed to perform testing with confidence, ensuring accurate blow-out pipeline (BOP) and wellhead testing.

• 170HP to 325HP high performance diesel engines (Electric unit option available)

• Options including: Heavy duty lifting frame, a JobBox, a digital or manual chart recorder, hydraulic hose reel or auxiliary hose stand

A-3 US & Canada: 800-231-8192 or 832-590-1300

Units20,000 PSI

UN

ITS

CLASSES OFFEREDTRAINING

PUMP OPERAtiOn & MAintEnAnCE

The course combines extensive hands-on training with classroom instruction and is recommended for maintenance personnel, operator and supervisors.

Class Length: 3 days

Class size: 10 maximum

Location: Jetstream Manufacturing Training Center Houston, TX

Call for class schedules and availability. Classes can be tailored to those in attendance.

this course covers:

• Safe waterblast operation• Unit maintenance and troubleshooting• Physical application and related safety issues• Safe pump operation• Pump maintenance• The UNx System (10k, 20k and 40k)• Swapping fluid ends• Waterblast guns• Pedals and accessories• Uni-valves• Proper packing, disassembly, repair and re-lapping• Hoses, lances, nozzles• Recommended spare parts• Preventative maintenance and winterization

sAFEtY-Fs sOLUtiOns

As the experts on waterblast and industrial vacuum equipment. FS Solutions makes OSHA training and compliance more convenient than ever through hands on courses developed by Gary Toothe, whose significant contributions and 25 years of experience are well-known in the waterblast and industrial vacuum industries.

OnLinE WitH FEDERAL siGnAL EsG UniVERsitY

• Work at your pace and convenience• Remain compliant with OSHA training• Safety increase productivity• Decrease risk of future liability

Additional tools • Jetstream Safety Manual Part no. 62113• Safety Video Part no. 28632

In order to ensure customer satisfaction, Jetstream has developed the Right Start program, a four-step plan designed to provide the owners and operators of new Jetstream waterblast units with the knowledge and support needed to feel familiar, confident and satisfied with Jetstream equipment and personnel.

1. transportationOnce a new waterblaster is built and thoroughly tested, the Shipping Manager contacts the new owner to arrange for the unit’s arrival to the right place at the right time.

4. trustIf any questions or problems ever arise, the Jetstream team is available and committed to providing prompt answers and solutions.

3. Follow-upWithin thirty days of delivery, and again within sixty days, the Solutions Provider will call to answer any questions and ensure complete satisfaction.

2. trainingAll new waterblasters include personal training by the Right Start Technician. Training involves both classroom and “hands-on” instruction to make sure that each operator is thoroughly familiar with the design and function of the unit and accessories, enabling him to safely put the new equipment to optimal use.

A-4www.waterblast.com

Units20,000 PSI U

NIT

S

AUTOMATED WATERBLASTING SOLUTIONSAutomation is a rapidly growing waterblast solution for tube cleaning, tank and boiler cleaning, surface preparation and hydro-demolition. Hands-free operations is key to a safe work environment. Positioning the operator at a distance, away from the work area, is the number one benefit to utilizing automated tools. This placement away from direct contact with the high pressure application allows for quick reaction time and decreases the possibility for employee injury.

To enhance operator safety, productivity and efficiency, Jetstream has partnered with strategic manufacturers of specialty equipment in automated and robotic tools and accessories. These alliances allow Jetstream to provide a total solution to the customer, from the waterblasting unit to the tools needed to perform the job safely and efficiently.

Offering the broadest range of automation solutions for industrial cleaning contractors, Jetstream provides:

• The broadest offering of hands free cleaning solutions

• Innovative, automated and robotic tools and accessories

• On-site solutions provided by regional automation specialists

• Rent or purchase options on a variety of state-of-the-art tooling

• Convenience with availability through Jetstream and FS Solutions rental centers

• Robotic and mechanical hydro-demolition solutions

• Application and safety training

For a list of products offered, contact your Regional Sales Manager or Inside Sales Technician for more details.

B-1

PUMP & FLUID ENDS20,000 PSI

PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

The Jetstream 20,000 psi UNx Bareshaft Pump provides unrivaled durability and strength. The pump is capable of power inputs up to 325 horsepower and, coupled with the best Jetstream UNx fluid end, provides flow* rates approaching twenty-five gallons per minute. Jetstream bareshaft pumps are the best choice for those building their own system or replacing a complicated, worn, or unreliable pump.

The following UNx Bareshaft Pumps available:

• 4200 Series (4220): 325HP @ 25.1 gpm

• 3600 Series (3620): 200HP @ 13.0 gpm

• 3000 Series (3020): 150HP @ 9.0 gpm

Six different pump displacement levels are available within the three series. See pages B-2, B-5 and B-8 for further details.

Power End:

• Ductile iron power frame is the strongest in the industry

• Heat treated billet alloy steel crankshaft

• Largest bearings of any pump on the market

UNx Fluid End:

• Superior performance

• Greater flexibility in the field

• Reduced downtime and maintenance

• See UNx Features and benefits on page B-11

NOTE: The placement of the crankshaft (right hand or left hand side) and paint color are required when ordering a bareshaft pump. Standard paint color is yellow.

UNx™ BARESHAFT PUMPFeatures And Benefits

B-2


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

MODEL 4220UNx™ BARESHAFT PUMPThe Jetstream model 4220 waterblast pump is capable of power input of up to 325 horsepower (242 kW). It is the most advanced and efficient waterblast pump of its size in the industry. Combining the strength and durability of a proven power end workhorse with the unparalleled simplicity, serviceability and versatility of the UNx fluid end design, Jetstream bareshaft pumps are the best choice for those building their own system or replacing a complicated, worn or unreliable pump.

• Up to 325 horsepower

• Flow of over to 21 gallons per minute at 20,000 psi**

• Three plunger (triplex) design

PLUNGERS CONNECTION TYPES*PUMP SPEED

RANGE MAX. POWERINPUT

MAX. FRAME LOAD

TOTAL WEIGHT

PUMP OIL

#STROKE DISCHARGE

PORTSTOP PORTS

(ACCESSORY)RPM TYPE

CAPACITY

in mm hp kW lb N lb kg gal l

3 4.25 108 20K Port Fml 20K Port Fml 150 – 514 325 242 17,750 78,950 1,800 820 80W-90 9 34

*See details on all connection types beginning on page I-2.

POWER END SPECS

FLUID END SPECS

**Flow values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.

PUMPPARTNO.

PLUNGER SIZEPOWER INPUT

FLOW AT SPECIFIED PUMP SPEEDS** MAX. FLOW / PRESSURE

NO.DIAMETER 150 RPM 200 RPM 300 RPM 400 RPM 514 RPM FLOW** PRESSURE

in mm hp kW gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm psi bar

52120 #8 .800 20.32 190 142 4.2 16 5.6 21 8.3 32 11.1 42 14.3 53 14.3 54 20,000 1,379

52125 #9 .900 22.86 250 186 5.3 20 7.0 27 10.5 40 14.1 53 18.1 66 18.1 68 20,000 1,379

52507 #10 .980 24.89 275 205 6.2 24 8.3 32 12.5 47 16.7 63 21.4 79 21.4 81 20,000 1,379

54730 #11 1.062 26.97 325 242 7.3 28 9.8 37 14.7 56 19.6 74 25.2 93 25.1 95 20,000 1,379

B-3


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

MODEL 4220UNX™ BARESHAFT PUMP

B-4


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com


ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION

1 26435 Capscrew 18 55253 Plate, Back Cover 34 51736 Plunger Coupling

2 26558 Washer 19 26195 Gasket, Cover Plate 35 51421 Power Frame

3 26798 Washer 20 71318 Guage, Oil Level, 3.5˝ 36 26500 Capscrew

4 51536 Cap, Frame, Outboard 28062 Guage, Oil Level, 4˝ 37 04101 Oil Seal, Outboard

5 71017 O-Ring 21 25946 Nipple 38 26481 Oil Seal, Inboard

6 26259 Shim, End Cap, Yellow 22 27101 Ball Valve 39 51713 Oil Seal Plate

7 26259-1 Shim, End Cap, Brown 23 25928 Plug 40 26479 O-Ring

8 26259-2 Shim, End Cap, White 24 26491 Capscrew 41 26468 Cotter Pin

9 26259-3 Shim, End Cap, Blue 25 29738 Plug 42 50295 Trunnion Rod

10 26376 Bearing, Race 26 26705 Magnet 43 53632 Cover, Rod Box

11 26390 Bearing, Cone 27 51487 Connecting Rod Assy 44 27592 Rubber Stopper

12 51538 Cap, Frame, Inboard 28 26051 Journal Bearing 45 26482 Setscrew

13 26208 Crankshaft Seal 29 28826 Crankshaft 46 26590 Caution Plate

14 26361 Capscrew 30 26369 Setscrew 47 51659 Trunnion

15 26484 Oil Trough 31 51731 Crosshead 48 26379 Setscrew

16 26360 Breather Cap 32 51534 Crosshead Pin

17 51279 Plate, Top Cover 33 26487 Deflector

PART BREAKDOWN

B-5


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

MODEL 3620UNx™ BARESHAFT PUMP


POWER END SPECS

**Flow values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.

FLUID END SPECS

The Jetstream model 3620 waterblast pump is capable of power input of up to 200 horsepower (149 kW). It is the most advanced and efficient medium horsepower waterblast pump in the industry. Combining the strength and durability of a proven power end workhorse with the unparalleled simplicity, serviceability and versatility of the UNx fluid end design, Jetstream bareshaft pumps are the best choice for those building their own system or replacing a complicated, worn or unreliable pump.


• Flow up to 13 gallons per minute at 20,000 psi*


PLUNGERS CONNECTION TYPES*PUMP SPEED RANGE

MAX. POWERINPUT

MAX. FRAME LOAD

TOTAL WEIGHTPUMP OIL

NO.STROKE DISCHARGE

PORTSTOP PORTS

(ACCESSORY) RPM TYPECAPACITY

in mm hp kW lb N lb kg gal l

3 3.60 92 20K Port Fml 20K Port Fml 150 – 550 200 149 11,300 50,300 1,720 780 80W-90 9 34

PUMPPART NO.

PLUNGER SIZE POWER INPUT

FLOW AT SPECIFIED PUMP SPEEDS** MAX. FLOW / PRESSURE

NO.DIAMETER 150 RPM 200 RPM 300 RPM 400 RPM 500 RPM 550 RPM FLOW** PRESSURE

in mm hp kW gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm psi bar

52585 #8 .800 20.32 170 127 3.5 13.2 4.7 17.7 7.1 27 9.4 36 11.8 44 12.9 49.31 12.9 49 20,000 1,379

B-6


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com


B-7


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300


1 26435 Capscrew 18 55253 Plate, Back Cover 34 51736 Plunger Coupling

2 26558 Washer 19 26195 Gasket, Cover Plate 35 51421 Power Frame

3 26798 Washer 20 71318 Guage, Oil Level, 3.5˝ 36 26500 Capscrew

4 51536 Cap, Frame, Outboard 28062 Guage, Oil Level, 4˝ 37 04101 Oil Seal, Outboard

5 71017 O-Ring 21 25946 Nipple 38 26481 Oil Seal, Inboard

6 26259 Shim, End Cap, Yellow 22 27101 Ball Valve 39 51713 Oil Seal Plate

7 26259-1 Shim, End Cap, Brown 23 25928 Plug 40 26479 O-Ring

8 26259-2 Shim, End Cap, White 24 26491 Capscrew 41 26468 Cotter Pin

9 26259-3 Shim, End Cap, Blue 25 29738 Plug 42 50295 Trunnion Rod

10 26376 Bearing, Race 26 26705 Magnet 43 53632 Cover, Rod Box

11 26390 Bearing, Cone 27 51487 Connecting Rod Assy 44 27592 Rubber Stopper

12 51538 Cap, Frame, Inboard 28 26051 Journal Bearing 45 26482 Setscrew

13 26208 Crankshaft Seal 29 53600 Crankshaft 46 26590 Caution Plate

14 26361 Capscrew 30 26369 Setscrew 47 51659 Trunnion

15 26484 Oil Trough 31 51731 Crosshead 48 26379 Setscrew

16 26360 Breather Cap 32 51534 Crosshead Pin

17 51279 Plate, Top Cover 33 26487 Deflector


PART BREAKDOWN

B-8


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

MODEL 3020UNx™ BARESHAFT PUMPThe Jetstream model 3020 waterblast pump is capable of power input up to 190 horsepower and displacement of ten gallons per minute at 20,000 psi. It is the most advanced and efficient compact waterblast pump in the industry. Combining the strength and durability of a proven power end workhorse with the unparalleled simplicity, serviceability, and versatility of the UNx™ fluid end design, Jetstream bareshaft pumps are the best choice for those building their own system or replacing a complicated, worn, or unreliable pump.


• Flow up to 9 gallons per minute at 20,000 psi*


FLUID END SPECS

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.**See details on all connection types beginning on page I-2.AEuropean Configuration.

PLUNGERSPUMP RANGE MAX. POWER INPUT MAX. FRAME LOAD TOTAL WEIGHT

PUMP OIL

TYPECAPACITY

#STROKE

in mm RPM hp kW lb N lb kg gal l

3 3.00 76.2 150 - 600 190 142 9,500 40,260 970 440 80W-90 5.0 19.0

PUMPPART NO.

PLUNGER SIZECONNECTION TYPES**

PUMP DISPLACEMENT AT SPECIFIED PUMP SPEEDS** MAX. OPERATINGPRESSURE

NO.

DIAMETER 150 RPM 200 RPM 300 RPM 400 RPM 500 RPM 550 RPM

in mm TOP PORTS

DISCHARGE PORTS gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm psi bar

52110 #6 .635 16.1320K Port Female

20K Port Female

1.9 7.1 2.5 9.4 3.7 14.0 4.9 18.7 6.2 23.4 7.4 28.0 20,000 1,379

52115 #7 .700 17.78 2.5 9.4 3.3 12.4 4.5 17.0 6.0 22.7 7.5 28.4 9.0 34.1 20,000 1,379

56714A #8 .780 19.86 2.8 10.5 3.7 14.0 5.6 21.1 7.4 28.0 9.3 35.2 10.2 38.6 20,000 1,379

POWER END SPECS

B-9


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300


B-10


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com


1 26435 Capscrew 16 26360 Breather Cap 30 51738 Crosshead

2 26558 Washer 17 50807 Plate Top Cover 31 52077 Crosshead Pin

3 26798 Washer 18 55252 Plate, Back Cover 32 26623 Deflector

4 51733 Cap, Frame, Outboard 19 26496 Gasket, Cover Plate 33 51737 Plunger Coupling

5 26495 Shim, End Cap, Yellow 20 71318 Guage, Oil Level, 3.5˝ 34 51748 Power Frame

6 26495-1 Shim, End Cap, Brown 28062 Guage, Oil Level, 4˝ 35 51659 Trunnion

7 26495-2 Shim, End Cap, White 21 25928 Plug 36 26462 Capscrew

8 26495-3 Shim, End Cap, Blue 22 27101 Ball Valve 37 25536 Oil Seal

9 25541 Bearing Assembly 23 25946 Nipple 38 51712 Oil Seal Plate

10 71016 O-Ring 24 29738 Plug 39 26478 O-Ring

11 51732 Cap, Frame, Inboard 25 26705 Magnet 40 26468 Cotter Pin

12 25428 Crankshaft, Seal 26 51749 Connecting Rod Assy 41 51666 Trunnion Rod

13 25251 Washer 27 26486 Journal Bearing 42 53681 Cover, Rod Box

14 26492 Capscrew 28 25508 Crank Shaft 43 26483 Setscrew

15 26484 Oil Trough 29 25132 Setscrew

PART BREAKDOWN


B-11


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

UNx™ FLUID ENDFEATURES AND BENEFITSThe Jetstream 20,000 psi UNx Fluid End is standard on every Jetstream 20,000 psi unit or bareshaft pump. It is also available as a conversion package for popular pump models or as an addition to an existing Jetstream 3000, 3600 or 4200 pump. Please refer to the catalog pages that follow for details on available models.

Every UNx Fluid End Features:

Serviceability• Reduced downtime and maintenance • Five minute packing change • Fifteen minute pop-out valve cartridge change • No special tools or equipment required • Plungers clamped, NOT threaded

Simplicity• Fewer parts than other 20,000 psi fluid ends • Uni-Valve™ one-piece cartridges include suction &

discharge valves, seats, springs, and seals • Swing-down manifold for easy access to components

Versatility• Fast in-the-field pressure range conversion with simple

bolt-on Jetstream UNx Fluid Ends • Convertibility of the UNx design allows one unit to

do the work that another manufacturer would require multiple units or several hours of downtime to perform

20,000 psi UNx Fluid End Features• Water lubricated packing set• Carbide coated plungers • Specially designed manifold connections are superior

to industry standard connections and feature easily replaceable seals

• High volumetric efficiency • All pressure-bearing components precision machined

from high quality stainless steel • Pulsation dampener built in to manifold

UNI-VALVE™ CARTRIDGE

UNI-PAK™ PLUNGER PACKING SET

CARBIDE COATED PLUNGERS

SWING-DOWN MANIFOLD

Part No. 28634Advanced UNx Waterblast Pump DVDOrder for more information on the UNx Fluid End design.

FIVE MINUTE PACKING CHANGE

15 MINUTE VALVE REPLACEMENT

SLIDE OUTSTUFFING BOXES

B-12


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

MODEL 5020QUNx™ FLUID END

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.**See details on all connection types beginning on page I-2.

5020 FLUID END SPECS

CONNECTION TYPES**PLUNGER SIZE PLUNGER

STROKE MAX. RPMMAX. FLOW*

MAX. OPERATING PRESSURE

NO.DIAMETER

TOP PORTS DISCHARGE PORTS in mm in mm gpm lpm psi bar

20K Port Female 20K HHP Port Female #11 1.062 26.97 5.00 127 413 39.6 150 20,000 1,379

UNI-VALVE (Item 7)

LUBE HARNESS(Item 8)

B-13


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

*Not shown

PART BREAKDOWN

ITEM PART NO. DESCRIPTION

1 54827 #11 Plunger

2 54828 #11 Gland Nut

3 26416 O-Ring

4 J55877 #11 Packing Set

5 54627 Adapter Plate

6 54826 #11 Stuffing Box

7 51790 Uni-Valve

7a 50465 Uni-Valve Seal Kit

7b 26550 Discharge Valve Spring

7c 26549 Suction Valve Spring

7d 51814 Spring Retainer

7e 26546 Retaining Ring

8 54690 Lube Harness Assy

8a 27732 Hose Fitting

8b 27740 Hose (Order in feet)

8c J70518 Hose Fitting

8d 52494 Lube Manifold

8e 27671 Capscrew


8f 26876 Needle Valve

9 54847 Plug, 20K HHP Port Male

10 54844Adapter, 20K HHP Port Male x 1- 5/16˝ Type M Male

11 54846Adapter, 20K HHP Port Male x 1˝ MP Female

12 52035 Rupture Disc Holder

13 26500 Manifold Bolt

14 52114 Lifting Rod

15 54824 Manifold

16 50295 Trunnion Rod

17 26468 Cotter Pin

18 51659 Trunnion

19 54638 Washer

20 60248 Adapter Plate Bolt

21 50889 Pump Wrench

22 54854Backup Ring, HHP Port Fitting

23 26523 O-Ring, HHP Port Fitting

24* 70179 Valve Extraction Tool

MODEL 5020QUNX™ FLUID END

*Not shown

B-14


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

MODELS 4220 & 3620UNx™ FLUID END


PART NO.CONNECTION TYPES**

PLUNGER SIZEPLUNGER STROKE MAX.

RPM

MAX. FLOW*MAX. OPERATING

PRESSURENO.

DIAMETER


51995 20K Port Female 20K Port Female #8 .800 20.32 3.63 92 550 12.9 48.8 20,000 1,379


PART NO.CONNECTION TYPES**

PLUNGER SIZE PLUNGER STROKE MAX.

RPM


PRESSURENO.

DIAMETER


51995

20K Port Female 20K Port Female

#8 .800 20.32 4.25 108 514 14.3 54.0 20,000 1,379

52000 #9 .900 22.86 4.25 108 514 18.0 68.3 20,000 1,379

52506 #10 .980 24.89 4.25 108 514 21.4 81.0 20,000 1,379

54965 #11 1.06 26.92 4.25 108 514 25.2 95.3 20,000 1,379

LUBE HARNESSItem 16

UNIVALVEItem 6

B-15


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

*Not shown.

MODELS 4220 & 3620UNX™ FLUID END

PART BREAKDOWN


1 50301 #8 Plunger

51828 #9 Plunger

52504 #10 Plunger

54966 #11 Plunger

2 51832 #8 Gland Nut

51829 #9 Gland Nut

52501 #10 Gland Nut

54828 #11 Gland Nut

3 26416 O-Ring

4 51857 #8 Packing Set

51826 #9 Packing Set


J55877 #11 Packing Set

5 50306 #8 & #9 Stuffing Box

52502 #10 & #11 Stuffing Box

6 51790 Uni-Valve






6f 51813 Suction Valve

6g 51812 Discharge Valve


7 27539 Coupler

8 53284 Adapter Assy

9 52035 Rupture Disc Assy

11 26589 Identifying Plate

12 52497 Gauge

13 52076 Port Plug

14 51818 Manifold

15 51659 Trunnion

16 51975 Lube Harness

16a 27101 Ball Valve

16b 25946 Nipple

16c 55477 Lube Manifold

16d 26802 Reducing Bushing

16e 27740 Hose Fitting

16f 26469 Hose (Order in feet)

17 50889 Wrench

Optional Packing Sets*

J70554 #8 (Plastic)

07189#8 (Plastic for #10-11 Stuffing Box)

J70555 #9 (Plastic)

J70556 #10 (Plastic)

54846 #11 (Composite)

B-16


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

MODEL 3020UNx™ FLUID END

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressurebearing components.**See details on all connection types beginning on page I-2.

PUMP PART NO.

CONNECTION TYPES**PLUNGER SIZE PLUNGER

STROKE MAX. RPM


PRESSURENO.

DIAMETER


52075

20K Port Female 20K Port Female

#6 .635 16.13 3.00 76.2 500 6.8 25.7 20,000 1,379

52080 #7 .700 17.78 3.00 76.2 550 9.1 34.4 20,000 1,379

55465 #8 .780 19.83 3.00 76.2 600 11.2 42.3 20,000 1,379

FLUID END SPECS

LUBE HARNESSItem 12UNI-VALVE

Item 8

B-17


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components. **See details on all connection types beginning on page I-2.

PART BREAKDOWN


1 26487 Reflector*

2 51736 Plunger Coupling*

3 51849 #6 Plunger

51739 #7 Plunger

55466 #8 Plunger


51851 #7 Gland Nut

55467 #8 Gland Nut

5 25165 O-Ring




7 51431 #6 & #7 Stuffing Box

55468 #8 Stuffing Box

8 51780 Uni-Valve









9 51558 Manifold

10 52035 Rupture Disc Assy




12b 25946 Nipple


12d 27732 Hose Fitting

12e 27749 Hose (Order in feet)

13 51659 Trunnion

14 26468 Cotter Pin



MODEL 3020UNX™ FLUID END

B-18


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

UNx™ FLUID END UPGRADESJetstream has created a wide variety of UNx Fluid Ends conversions to adapt to your existing competitor pump. The upgrade delivers all of the benefits of the UNx Fluid End design:

• Superior performance

• Greater flexibility in the field

• Reduced downtime and maintenance

• See UNx Features and Benefits on page B-11

Contact your Regional Sales Manager for inquiries on upgrades required.

JETSTREAM FLUID END CONVERSIONS

FLUID END PART NO.

FLUID ENDMODEL

DESCRIPTION MANUFACTURER MANUFACTURER MODEL

52095 3020B #6 Triplex Butterworth/Gardner Denver L-74/L-300

52545* 3720B #8 Triplex

Butterworth/Gardner Denver L-375, T-375, I-375, TF-375, L-130

54790* 3720B #9 Triplex

59489* 3720B #11 Triplex

54820* 3720B #9 Triplex w/o Mounting Pkg.


52090* 4520B #8 Triplex

Butterworth/Gardner Denver L-450,TF-450

54780* 4520B #9 Triplex

53660* 4520B #10 Triplex

55263* 4520B #11 Triplex


52105 3020N #7 Triplex NLB 1012 / 10120

52160* 4220N #8 Triplex

NLB

10150, 10200, 10225, 15203, 20153, 20156, 20203, 20225, 24155,

24205, 24225, 40201 and other / TD-120

54795* 4220N #9 Triplex

59687* 4220N #10 Triplex

54870* 4220N #9 Triplex w/o Mounting Pkg.

59688* 4220N #10 Triplex w/o Mounting Pkg.

53580* 4220QN #8 Quintuplex

NLB 10250, 20253J55885* 4220QN #9 Quintuplex

J55890* 4220QN #10 Quintuplex

59463* 4220QN #11 Quintuplex

52780 3120T #6 Triplex Tritan P.313

52100 3020W #6 Triplex Weatherford FE85/TD60

52155 3020Q #6 Quintuplex Weatherford FE105, QD100, MB10125

52085 3520Q #6 Quintuplex Weathley/Tritan W:HP125/T:5127

54565* 3720W #7 Triplex Woma 1502, 1503

55290 3720WZ #7 Triplex Woma 150-Z

*Detailed information to follow on pages B-20 to B-29.

B-19


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

EUROPEAN JETSTREAM FLUID END CONVERSIONS

FLUID END PART NO.

FLUID ENDMODEL

DESCRIPTION MANUFACTURER EURO MODEL INCLUDES

55337 3020 #6 Triplex

Jetstream

Euro Lube Harness

Dual Gauge

Euro Bypass Valve

Hydrothrottle Package

Spare Tools Package

55187 3020 #7 Triplex

55362 3020 #8 Triplex

55191 3620 #8 Triplex

55350 4220 #9 Triplex

55195 4220 #10 Triplex

55199 4220 #11 Triplex

55357 5020 #11 Quintuplex

B-20


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

UNI-VALVE (Item 8)


UNx™ FLUID END UPGRADEBUTTERWORTH L-450 PUMPS | GARDNER-DENVER TF-450 PUMPS

PART NO.


PUMP DISPLACEMENT AT SPECIFIED PUMP SPEEDS* MAX. OPERATING PRESSURE

NO.DIAMETER 200 RPM 300 RPM 400 RPM 514 RPM

in mm TOP PORTS DISCHARGE PORTS gpm lpm gpm lpm gpm lpm gpm lpm psi bar

52090 #8 .800 20.32

20K PortFemale

20K PortFemale

5.9 22.2 8.8 33.4 11.8 44.5 14.7 55.6 20,000 1,379

54780 #9 .900 22.86 7.4 28.2 11.2 42.2 14.9 56.3 18.6 70.4 20,000 1,379

53660 #10 .980 24.89 8.8 33.4 13.2 50.1 17.6 66.8 22.1 83.5 20,000 1,379

55263 #11 1.06 26.92 10.4 39.3 15.5 58.6 20.7 78.3 25.9 98.0 20,000 1,379

FLUID END SPECS

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.** See details on all connection types beginning on page I-2.

B-21


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

PART BREAKDOWN


1 26487 Deflector

2 51736 Plunger Coupling

3 50301 #8 Plunger

51828 #9 Plunger

52504 #10 Plunger

54966 #11 Plunger


51829 #9 Gland Nut

52501 #10 Gland Nut

54828 #11 Gland Nut

5 26416 O-Ring





7 51991 #8, #9 Stuffing Box

53296 #10, #11 Stuffing Box

8 51790 Uni-Valve









9 51974 Manifold





12b 25946 Nipple




12f 26469 Hose (order in feet)

13 51659 Trunnion

14 26468 Cotter Pin





19 51719 Plunger Adapter

UNX™ FLUID END UPGRADEBUTTERWORTH L-450 PUMPS | GARDNER-DENVER TF-450 PUMPS

B-22


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com


*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.**See details on all connection types beginning on page I-2.A Fluid End connections without the mounting package.

PART NO.



NO.

DIAMETER 200 RPM 300 RPM 400 RPM 500 RPM

in mm TOP PORTSDISCHARGE

PORTS gpm lpm gpm lpm gpm lpm gpm lpm psi bar

52545 #8 .800 20.32

20K PortFemale

20K PortFemale

4.9 18.5 7.3 27.8 9.8 37.1 12.2 46.3 20,000 1,379

54790 #9 .900 22.86 6.2 23.5 9.3 35.2 12.4 47.0 15.5 58.7 20,000 1,379

59489 #11 1.06 26.92 8.6 32.5 12.9 48.8 17.3 65.4 21.6 81.7 20,000 1,379

54820A #9 .900 22.86 6.2 23.5 9.3 35.2 12.4 47.0 15.5 58.7 20,000 1,379

59487A #11 1.06 26.92 8.6 32.5 12.9 48.8 17.3 65.4 21.6 81.7 20,000 1,379

FLUID END SPECS

UNI-VALVE (Item 8)


B-23


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300


PART BREAKDOWN


1 26487 Deflector


3 50301 #8 Plunger

51828 #9 Plunger

54966 #11 Plunger


51829 #9 Gland Nut

54828 #11 Gland Nut

5 26416 O-Ring






8 51790 Uni-Valve









9 52487 Manifold





12b 25946 Nipple





12g 27475 Needle Valve

12h 26465 Nipple

13 51659 Trunnion

14 26468 Cotter Pin






B-24


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

UNx™ FLUID END UPGRADENLB TRIPLEX PUMPS 150 TO 225 HORSEPOWER

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.**See details on all connection types beginning on page I-2.AFluid End conversion without mounting package.

PART NO.



NO.




52160 #8 .800 20.32

20K PortFemale

20K PortFemale

4.6 21.0 8.3 31.5 11.1 42.0 13.9 52.5 20,000 1,379

54795 #9 .900 22.86 7.0 26.6 10.5 39.9 14.1 53.2 17.6 66.5 20,000 1,379

59687 #10 .980 24.89 8.3 31.4 12.5 47.3 16.7 63.2 20.8 78.7 20,000 1,379

54870A #9 .900 22.86 7.0 26.6 10.5 39.9 14.1 33.2 17.6 66.5 20,000 1,379

59688A #10 .980 24.89 8.3 31.4 12.5 47.3 16.7 63.2 20.8 78.7 20,000 1,379

FLUID END SPECS

UNI-VALVE (Item 8)


B-25


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

UNx™ FLUID END UPGRADENLB TRIPLEX PUMPS 150 TO 225 HORSEPOWER


1 26487 Deflector


3 50301 #8 Plunger

51828 #9 Plunger

52504 #10 Plunger


51829 #9 Gland Nut

52501 #10 Gland Nut

5 26416 O-Ring






8 51790 Uni-Valve









9 51818 Manifold





12b 25946 Nipple






12h 26465 Nipple

13 51659 Trunnion

14 26468 Cotter Pin





19 26669 Adapter Plate Nut


PART BREAKDOWN

B-26


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

UNx™ FLUID END UPGRADENLB QUINTUPLEX PUMPS UP TO 250 HORSEPOWER

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.**See details on all connection types beginning on page I-2.***Fluid End conversion without the mounting package.

PART NO.



NO.




53580 #8 .800 20.32

20K PortFemale

20K PortFemale

6.9 26.3 9.3 35.0 13.9 52.5 18.5 70.0 20,000 1,379

J55885 #9 .900 22.86 11.7 44.2 17.6 66.6 23.4 88.5 29.3 110.9 20,000 1,379

J55890 #10 .980 24.89 13.9 52.6 20.8 78.7 27.8 105.2 34.7 131.3 20,000 1,379

59463 #11 1.06 26.92 16.3 61.6 24.5 92.7 32.6 123.3 40.8 154.4 20,000 1,379

FLUID END SPECS

UNI-VALVE (Item 8)


B-27


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300

UNx™ FLUID END UPGRADENLB QUINTUPLEX PUMPS UP TO 250 HORSEPOWER


1 26487 Deflector


3 50301 #8 Plunger

51828 #9 Plunger

52504 #10 Plunger

54966 #11 Plunger


51829 #9 Gland Nut

52501 #10 Gland Nut

54828 #11 Gland Nut

5 26416 O-Ring






52502 #10, #11 Stuffing Box

8 51790 Uni-Valve









9 53599 Manifold





12b 25946 Nipple






12h 26465 Nipple

13 51659 Trunnion

14 26468 Cotter Pin






20 27551 Suction Manifold Bolt

21 25566 O-Ring

22 53601 Suction Manifold

PART BREAKDOWN

B-28


PU

MP

&

FLU

ID E

ND

S

www.waterblast.com

UNx™ FLUID END UPGRADEWOMA 150 SERIES PUMPS

*Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.**See details on all connection types beginning on page I-2.

PART NO.



NO.




54565 #7 .700 17.78 20K PortFemale

20K PortFemale

3.7 14.2 5.6 21.2 7.5 28.3 9.4 35.4 20,000 1,379

55290 #7 .708 17.98 3.7 14.2 5.6 21.2 7.5 28.3 9.4 35.4 20,000 1,379

FLUID END SPECS

UNI-VALVE (Item 8) LUBE HARNESS

(Item 9)

B-29


PU

MP

&

FLU

ID E

ND

S

US & Canada: 800-231-8192 or 832-590-1300



2 28616 Capscrew

3 54504 #7 Plunger


5 25165 O-Ring


7 54498 #7 Stuffing Box

8 51780 Uni-Valve





8e 26501 Retainer Ring





9a 27101 Ball Valve

9b 25946 Nipple


9d 27732 Hose Fitting

9e 27475 Needle Valve

9f 26465 Nipple

9g 60815 Nipple, 7/6 Hx

9h 27740 Hose (Order in feet)


11 28462 Capscrew

12 55274 Manifold


14 26468 Cotter Pin

15 29748 Capscrew

16* 26544 5/8˝ Hex Wrench

17* 25421 3/4˝ Hex Wrench

PART BREAKDOWN

UNx™ FLUID END UPGRADEWOMA 150 SERIES PUMPS

*Not shown

C-1

PumP Accessories20,000 PSI

PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

PUMP ACCESSORIESALL THe PArTs You NeeD, NoNe oF THe PArTs You see As A NecessiTY.

Jetstream offers recommended pump and fluid end parts to ensure a safe and uninterrupted workday. From spare parts packages to filters to pump tools, necessary and optional parts associated with the bareshaft pump and fluid end are provided in this section. These parts are the skeleton to the functionality of the fluid end. Easily maintained parts ensure the pump is performing at required pressures throughout the entire job.

The Pump Accessories section includes the following parts and packages:

• Fluid End Spare Parts Packages

• Pump Tools (Wrenches, Studs, Lubricants)

• Filters and Filter Assemblies

• Pressure Gauges

• Rupture Disc Assembly and Discs

• Valves (Bypass, Air-Operated, Hydraulic, Multi-Gun Valves)

• Hydro-Throttle Assemblies

• Multi-Unit Manifold

• Hydrostatic Test Valve

• 20K Check Valve

C-2


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

SPARE PARTS PACKAGESUNx™ FLUID ENDA must-have for field repairs, these packages include all major fluid end replacement packaged together for easy transport and storage.

• Available for most 20K UNx fluid ends.

• Packaged in a top-of-the-line, waterproof Pelican® case with tough custom foam inlay.

Package contents

• 1 or 3 Plungers.

• 3 Uni-Valves.

• 3 Packing Sets.

• 3 Uni-Valve Seal Kits.

• 10 Burst Discs (five each at primary and secondary relief pressures, or ten at the same relief pressure if only one rupture disc holder is used).

• Locking waterproof case and keys.

1 PLuNGer PAcKAGes 3 PLuNGer PAcKAGes

PART NO. PRESSURE (PSI) DESCRIPTION PART NO. PRESSURE (PSI) DESCRIPTION

S1302-20-6-B 20,000 3020 #6 SP302-20-6-B 20,000 3020 #6

S1302-20-6-S 20,000 3020 #6 SP302-20-6-S 20,000 3020 #6

S1302-20-7-B 20,000 3020 #7 SP302-20-7-B 20,000 3020 #7

S1302-20-7-S 20,000 3020 #7 SP302-20-7-S 20,000 3020 #7

S422-20-8-B 20,000 4220 #8 SP422-20-8-B 20,000 4220 #8

S422-20-8-S 20,000 4220 #8 SP422-20-8-S 20,000 4220 #8

S422-20-9-B 20,000 4220 #9 SP422-20-9-B 20,000 4220 #9

S422-20-9-S 20,000 4220 #9 SP422-20-9-S 20,000 4220 #9

S422-20-10-B 20,000 4220 #10 SP422-20-10-B 20,000 4220 #10

S422-20-10-S 20,000 4220 #10 SP422-20-10-S 20,000 4220 #10

S422-20-11-B 20,000 4220 #11 SP422-20-11-B 20,000 4220 #11

S422-20-11-S 20,000 4220 #11 SP422-20-11-S 20,000 4220 #11

PAcKAGiNG NoTes:# of Plungers S1 or SP | S1=1 plunger | SP=3 plungersFluid End Model 302 or 422Working Pressure 20Plunger Size 6, 7, 8, 9, 10 or 11Burst Discs B or S | B=five discs at primary and secondary relief pressures; S=ten discs for use with secondary relief device

C-3


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

TOOLSPumP WreNcHesThe only special tool needed to work on a Jetstream UNx pump. For use with mainfold and gland nut.

mANiFoLD mouNTiNG sTuDsFor easy and safe removal of manifolds during pressure conversions that require a manifold change (e.g. 10,000psi-40,000psi). To use, replace the top two outer manifold bolts with the mounting studs. Then, remove all bolts and the trunnion rod (hinge rod). The manifold can then be easily slid out and replaced with another. Sold individually.

FOR USE WITH THE FOLLOWING MODELS:

PART NO. 26500 PART NO. 26462 PART NO. 25607 PART NO. 27550

5020Q 3020 3720B 4220QN

4220 3020B 4020B

3620 3020N 4220N

3020Q 4520B

3020W

3120T

3520Q

3720W

3720WZ

VALVe PuLLerPart No. 70179The perfect tool for easily extracting uni-valves from the manifold. Sold individually.

BeLT TeNsioN GAuGePart No. 26993Ensure pump drive belts are properly tensioned for proper pump operation and maximum belt life. For use with V-belts.

PumP oPerATioN AND mAiNTeNANce DVD

Part No. 70002An excellent learning tool, the Pump Operation and Maintenance DVD from Jetstream covers important topics such as waterblast safe-ty, waterblast unit and pump maintenance and operation.

BeLT TeNsioN GAuGePart No. 70930For use with Power Band and synchronous belts.

SIZE 7/8˝PART NO. 50889

SIZE 3/4˝PART NO. 50064

SIZE 5/8 ˝PART NO. 26544

5020Q 3020 3120T

4220 3020B 3520Q

3620 3020N 3720W

3720B 3020Q 3720WZ

4020B 3020W

4220N

4220QN

4520B

C-4


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

iTem PArT No. DescriPTioN iTem PArT No. DescriPTioN

1 51864 Diffuser 7 25206 Capscrews

2 51869 Cartridge 8 27251 2˝ Air Cylinder

3 53369 Body 9 27107 Capscrews

4 56999 Pusher Air Cylinder 10 25796 Hose Barb

5 J56366 Adapter Plate 11 58848 Muffler

6 J70633 Washer

The Air-Operated Diverter Valve allows an operator to remotely control pressure in 20,000 psi cleaning applications, specially in automated cleaning processes. Reduces operator fatigue by actuating the system pneumatically rather than mechanically.

When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to near atmospheric.

• Quick cartridge overhaul for easy field maintenance

• Remote operation for added operator convenience and safety

• Pneumatic operation for reduced operator fatigue

DIVERTER VALVEAIR-OPERATED (DUMP)

ASSEMBLY PART NO.*

MOUNTING STYLE

CONNECTION TYPEMAXIMUMFLOW RATE

MAX. OPERATING PRESSUREINLET AIR PRESSURE

MIN. MAX.

INLET OUTLET gpm psi bar psi bar psi bar

53445 Pump 20K Port Female 30-35 20,000 1,379 70 4.8 125 8.6

J55780 Pump3/4˝ MP Female

50 20,000 1,379 70 4.8 125 8.6

57292 Base 50 20,000 1,379 70 4.8 125 8.6

PArT No. 53445 BreAKDoWN

*Repair Kit includes o-rings, bushings and wiper.

rePLAcemeNT cArTriDGe

Diverter valve utilizes a cartridge, to completely rebuild the dump valve in about 30 seconds.

Part No. 51869 (for 53445)

Part No. 52750 (for J55780 & 57292)

*Additional high-flow options available upon request.

C-5


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com


1 29722 Hose Barb 7 53424 Pusher

2 51638 Diffuser 8 54321 Mounting Plate

3 52750 Cartridge 9 27714 Capscrew

4 55411 Body, Mag 10 54342 Air Cylinder, 2.5˝

5 28384 Collar 11 28364 Muffler

6 28383 Gland Nut 12 28399 Capscrew

DiVerTer VALVeAir-oPerATeD (DumP) Hi-FLoW

PArT No. J55780 BreAKDoWN

C-6


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

The Air-Operated Diverter Valve allows an operator to remotely control pressure in 20,000 psi cleaning applications. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is released, reducing system pressure to drop to near atmospheric. It is especially useful in automated cleaning processes or to reduce operator fatigue by actuating the system pneumatically rather than mechanically.

• 30 second field replaceable cartridge design for minimal downtime.

• Remote pneumatic operation for reduced operator fatigue and added convenience and safety.

• Specially designed inlet and outlet connections are superior to industry standard connections and use a replaceable seal rather than metal to metal contact.

• Heavy duty air cylinder.

• All pressure-bearing components are stainless steel.

DIVERTER VALVEAIR-OPERATED (SHUT-IN)


1 60420 Cartridge 6 J70633 Washer

2 54392 Body 7 27251 2˝ Air Cylinder

3 56999 Pusher Air Cylinder 8 27107 Capscrew

4 J56366 Adapter Plates 9 52543 Plug Assy

5 25206 Capscrew

PArT BreAKDoWN

ASSEMBLY PART NO.

MOUNTING STYLE

CONNECTION TYPEMAXIMUMFLOW RATE

MAX. OPERATING PRESSUREINLET AIR PRESSURE

MIN. MAX.

INLET OUTLET gpm psi bar psi bar psi bar

J55868 Pump20K Port Female

30-35 20,000 1,379 70 4.8 125 8.6

J55870 Base 30-35 20,000 1,379 70 4.8 125 8.6

C-7


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

The Electric Diverter Valve allows an operator to remotely control pressure in 20,000 psi cleaning applications, specifically in automated cleaning processes. Reduces operator fatigue by actuating the system electronically rather than mechanically.

When the electric voltage is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the voltage is exhausted, reducing system pressure to near atmospheric.



• Electric operation for reduced operator fatigue

ELECTRIC DIVERTER VALVE

iTem PArT No. DescriPTioN

1 53203 Base Mounting Plate

2 25820 Electric Box

3 27347 Terminal Block

4 25644 Fuse Panel

5 27349 Relay, 12V

6 26075 Nipple

7 25206 Capscrew

8 26689 Capscrew

9 57202 Panel, Mounting

10 26709 Washer

11 26711 Nut

12 26706 Capscrew

13 29799 Nipple

14 25802 Solenoid Valve

15 26116 Pin

16 25645 Connector

17 27252 Connector

18 53445 Air Operated Valve

19 52250 NSOV

PArT BreAKDoWN

ASSEMBLY PART NO.

MOUNTING STYLE

CONNECTION TYPE VOLTAGE

MAXIMUMFLOW RATE


INLET OUTLET gpm psi bar

53690 Base 20K Port Female 12 V 30-35 20,000 1,379

57296 Panel 3/4˝ MP Female 12 V 50 20,000 1,379

C-8


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300


1* 29722 Hose Barb 7 60025 Diverter Valve

251638 Diffuser 8 60027 Guide Spring

53959 Diffuser, Hi-Flow 9 60026 Spring

352750 Cartridge

1060075 Hyd. Adapter, Single

53915 Cartridge, Hi-Flow 60023 Hyd. Adapter, Dual

459383 Body 11 26689 Capscrew

62026 Body, Hi-Flow12

60079 Hyd. Cylinder, Single

5 54321 Adapting Plate 60022 Hyd. Cylinder, Dual

6 27714 Capscrew

PArT BreAKDoWN

HYDRAULIC DIVERTER VALVEThe Hydraulic Diverter Valve allows an operator to remotely control pressure in 20,000 psi cleaning applications, specifically in automated cleaning processes. Reduces operator fatigue by actuating the system hydraulically rather than mechanically.

When hydraulic pressure sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the hydraulic pressure is exhausted, reducing system pressure to near atmospheric.



• Hydraulic operation for reduced operator fatigue


Diverter valve utilizes a cartridge, to completely rebuild the dump valve in about 30 seconds. Part No. 52750

PART NO. STYLECONNECTION

TYPE

MAX OPERATING PRESSURE

INLET HYDRAULIC PRESSURE

LENGTH

psi bar in mm

60078Single Acting

¾˝ MP Female 22,000 1,516

500-5,000 psi

13.3 339.0

60024Double Acting

¾˝ MP Female 22,000 1,516 13.2 337.3

62025Single ActingHI-FLOW

1˝ MP Female

20,000 1,379

*For Std only, Hi-Flow includes 62259 (Tee) and 57432 (Nipple).

C-9


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

A bypass valve diverts a portion of pump flow to a low- pressure outlet and is used on diesel and electric units. For diesel engines, it is used to prevent bogging the engine when using flows at the low end of the pump’s capability. A bypass valve is required on electric units due to the non-adjustability of motor speed.

• Two minute field-replaceable cartridge design for minimal downtime.

• Hand adjustment—no wrench needed.

• Pump mount model connects to fluid end manifold.

• Base mount model connects in-line downstream and includes a protective cage and a pressure gauge for remote adjustment.

• All pressure-bearing components precision machined from stainless steel.

• Specially designed inlet connections are superior to industry standard connections and use a replaceable seal rather than metal to metal contact.

BYPASS VALVEHAND ADJUSTABLE

PArT BreAKDoWN

*Included on adjuster.

PART NO.MOUNTING

STYLE

PRESSURE GAUGE

INCLUDED

INLET CONNECTIONS*

LOW PRESSURE OUTLET

CONNECTION

DIMENSIONSWEIGHT

MAX. OPERATING PRESSURELENGTH DIAMETER

in mm in mm lbs kg psi bar

54592 Pump No 20K Port Female 1/2˝ NPTF 10.0 254 4.5 114 11 5 20,000 1,379

52685 Base Yes 20K Port Female 1/2˝ NPTF 10.0 254 4.5 79 28 12 20,000 1,379


BAse mouNTeD BYPAss VALVe.


1 52144 Adjuster

2 25603 O-Ring, Adjuster*

3 54584 Body

4 50795 Arm Adjuster

5 25593 Capscrew

6 52076 Port Plug

7 52255 Cartridge

8 54593 Outlet Adapter

9 71495 Nipple

10 71496 Elbow

11 70173 Nipple, Quick Disconnect

12 70174 Coupler

13 27350 Hose Barb

PumP mouNTeD BYPAss VALVe.

C-10


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

Required for use with shut-in systems on plunger pumps, the regulator valve maintains constant system pressure when operating one or more shut-in guns from a single pump. When a gun is disengaged, the regulator “senses” the reduction in flow downstream and shifts open just enough to divert water to a low pressure for other operators without over-pressurizing the system.

• Two minute field-repairable cartridge design for minimal downtime

• Hand Adjustment—no wrench needed

• Specially designed inlet connections are superior to industry standard connections and use a replaceable seal rather than metal to metal contact

PART NO. STYLE CONNECTION TYPE

MAX OPERATING PRESSURE

LENGTH

psi bar in mm

55520 Long Handle 1˝ MP Male 20,000 1,379 15.9 403.8

55570 Long Handle 20K Port Male 20,000 1,379 14.7 373.3


Regulator valve utilizes a cartridge, to completely rebuild the valve in about 30 seconds. Part No. 55540

REGULATOR VALVELONG HANDLE (DUMP STYLE)


1 55524 Adjuster 11 25740 O-Ring

2 27680 Capscrew 12 55521 Body

3 55523 End Cap 13 55540 Cartridge

4 25165 O-Ring 14 26416 O-Ring

5 25212 O-Ring 15 55567 Base

6 25125 O-Ring 16 21929 Jam Nut

7 55522 Pusher, Spring 17 29722 Hose Barb

8 70127 Spring Disc* 18 55531 Handle

9 55519 Plunger 19 70130 Knob, Handle

10 70125 Backup Ring

PArT BreAKDoWN

*Sold individually

C-11


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com


MGV utilizes a cartridge, to completely rebuild the valve in about 30 seconds. Part No. 52255


1 52202 Outlet Adapter 9 52040 20K Seal

2 52201 Diffuser 10 50900 Adjuster

3 26782 O-Ring 11 25603 O-Ring

4 52348 Backup Ring 12 52221 Adjuster Adapter

5 26776 O-Ring 13 50795 Locking Arm

6 52255 Cartridge 14 25593 Capscrew

7 52206 Manifold 15 50811 Base

8 52076 Plug 16 25700 Capscrew

The Multi-Unit Manifold, or MUM, was designed to provide large flows through the utilization of two waterblaster pumps to one end source. The MUM provides a single device joining the water flows created through the use of two waterblasting systems while pump pressure is stabilized.

• Setup using two hand adjustment dials is fast and simple.

• Utilizes two valve cartridges that can be easily replaced to completely rebuild the valve in the field in only three minutes.


• Zinc-plated base for corrosion resistance.


• Additional Multi-Gun Valves can be added a system to further increase the number of tools in operation by a single unit.

MULTI-GUN VALVE (MGV)

PArT BreAKDoWN

PART NO.INLET & OUTLET CONNECTIONS*

OUTLET(GAUGE)

CONNECTIONS*

DIMENSIONS

WEIGHTMAX. OPERATING

PRESSURE(GUN) CONNECTIONS*

WIDTH (W) DEPTH (D)

in mm in mm in mm lbs kg psi bar

52190 20K Port Female 20K Port Female 4.3 109 8.0 203 10.8 275 29 13 20,000 1,379

J55800 3/4˝ MP Female 3/4˝ MP Female 4.3 109 8.0 203 10.8 275 29 13 20,000 1,379


C-12


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

The Multi-Unit Manifold, or MUM, was designed to provide large flows through the utilization of two waterblaster pumps to one end source. The MUM provides a single device joining the water flows created through the use of two waterblasting systems while pump pressure is stabilized.

• One complete system including the bypass Valve and pressure gauge

• Ease of maintenance through a cartridge change on the bypass valve

• Specially designed inlet and outlet connections are superior to industry standard connections and use a replaceable seal rather than metal to metal contact

MULTI-UNIT MANIFOLD (MUM)

PART NO.INLET & OUTLET CONNECTIONS*

OUTLET OUTLET(GAUGE)

CONNECTIONS*

DIMENSIONS MAX. OPERATING PRESSUREWIDTH (W) DEPTH (D)

in mm in mm psi bar

57164 3/4˝ MP Female 1/2˝ MP Female 20K Port Female 8 203.2 10 254 20,000 1,379


1 27350 Hose Barb

2 70174 Coupler, 1/2˝ npt

3 70173 Nipple, 1/2˝ npt

4 71496 Elbow

5 71495 Nipple


7 52255 Cartridge

8 54584 Body-Bypass

9 25603* O-Ring, Adapter

10 52144 Adjuster

11 52040 Seal

12 51918 Port Plug

13 50795 Adjuster, Arm

14 25593 Capscrew, Bypass

15 51929 Nut, Jam


17 57157 Y-Fitting

18 55304 Base

19 25700 Capscrew, Base

20 25037 Pressure Gauge

21 26645 Gland

22 26635 Collar



*Included in 52144 Adjuster.

PArT BreAKDoWN

C-13


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

The Jetstream Hydrostatic Test Valve (HTV) is used for the pressure testing of pipes or other vessels. This valve allows one operator to control the filling, pressurizing and pressure bleeding from central location. Included in this valve is the hand lever, which eliminates the need to “feather” the clutch on the Waterblasting unit.

• Two-minute field replaceable cartridge design for minimal downtime

• Hand controls for high pressure filling and bleeding, without the use of a wrench

• Stainless steel pressure bearing components

• Internal ball check valve

• Adapts to various data acquisition apparatuses

HYDROSTATIC TEST VALVE (HTV)

PART NO.INLET

CONNECTION

OUTLET(TEST DEVICE)CONNECTION

OUTLET(CHART RECORDER)

CONNECTION*

OUTLET (BLEED BACK TANK)

CONNECTION*


PRESSURE

lbs kg psi bar

61376 1/2˝ NPT Female 1/2˝ NPT Female 9/16˝ MP Female 9/16˝ MP Female 100 45.3 20,000 1,379


C-14


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

PArT BreAKDoWN


1 28184 Elbow 13 26798 Washer

2 61474 Check Valve 14 29904 Nut

3 28025 Needle Valve, 3-Way 15 27122 Capscrew

4 27969 Cross, 4-Way 16 25314 Nut

5 25037 Pressure Gauge 17 25247 Washer

6 27968-04 Nipple 4˝ 18 26565 Capscrew

7 27971 Adapter 19 61331 Plate,

8 50989 Coupling, Quick Disconnect 20 61686-08 Bracket

9 27968-03 Nipple, 3˝ 21 26707 Capscrew

10 27968-11 Nipple, 11˝ 22 25251 Flat, Washer

11 61687 U-Bolt 23 25249 Lock, Washer

12 27973 Plug 24 61378 Capscrew

HYDrosTATic TesT VALVe (HTV)

C-15


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

The 20K Check Valve was designed to protect components by ensuring flow in one direction only. This tool is ideal for the hydrostatic testing market; however, can be utilized in many other applications.

• 30 second field repairable cartridge design for minimal downtime

• Prevents removal of high pressure connections if valve maintenance is required

• Ball-style with low crack pressure

20K CHECK VALVE


PART NO.INLET & OUTLETCONNECTIONS*

DIMENSIONSWEIGHT

MAX. OPERATING PRESSURELENGTH

in mm lbs kg psi bar

61993 9/16˝ Female MP 4 101.6 3.8 1.7 20,000 1,379


1 26645 Gland

2 26635 Collar

3 61904 Inline Valve

4 60765 Base, Check Valve

5 60766 Plug Assy

PArT BreAKDoWN

C-16


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

The Nozzle Shut Off Valve (NSOV) is designed for use with dump style foot guns. The Nozzle Shut Off Valve completely stops all water flow to the cleaning nozzle in a waterblast operation while the foot valve is in its dump mode.

• Allows the operator to freely move the nozzle without impairment of vision caused by sprayback (shown below).

• Opens fully for unimpeded flow to the nozzle when blasting.

• Mounts between lance and foot gun (shown at right).

• All pressure-bearing components precision machined from stainless steel.

NOZZLE SHUT-OFF VALVE (NSOV)

* See details on all connection types beginning on page I-2.

WiTH NsoV iNsTALLeD WiTHouT NsoV iNsTALLeD

PART NO. INLET CONNECTION* OUTLET CONNECTION*

DIMENSIONSWEIGHT

MAX. OPERATING PRESSURELENGTH DIAMETER


52250 20K Port Male 20K Port Female 4.25 108 1.75 44.5 2 1 20,000 1,379


1 52040 20K Seal

2 52251 Body

3 52624 Valve

4 26455 Spring

5 26776 O-Ring


PArT BreAKDoWN

C-17


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

RUPTURE DISC HOLDERSFor protection from dangerous over-pressurization, rupture discs function in a waterblast system similar to the function of fuses in an electrical circuit. When the system pressure exceeds that of the burst disc, the disc fails and allows water to flow out of the holder’s cap, relieving the system of high pressure.

• May be used as primary and/or secondary relief device

• Tamper-resistant design

• Discs are quickly and easily replaceable NOTE: Burst disc not included with assembly.

making a Disc selection:For primary relief devices, select disc with burst pressure of approximately 1.2 times desired operating pressure.

example: For operating pressure of 20,000 psi, desired burst pressure is 20,000 x 1.2 = 24,000 psi. Select 24,000 psi Burst Disc, Part No. 51838.

For secondary relief devices, select disc with burst pressure of approximately 1.4 times desired operating pressure.

example: For operating pressure of 20,000 psi, desired burst pressure is 20,000 x 1.4 = 28,000 psi. Select 27,000 psi Burst Disc, Part No. 51837 or 29,000 psd Burst Disc, Part No. 51836.

BursT Disc cHArT

PArT BreAKDoWN

PART NO.CONNECTION

TYPE

OVERALL LENGTH DISC BLOW OUT DIAMETER FLATSMAX. WORKING

PRESSURE

in mm in mm in mm psi bar

51890 9/16˝ MP Male 3.16 80.3 .40 10.2 1.25 31.8 20,000 1,379

52035 Jetstream 20K Port Male 3.03 77.0 .40 10.2 1.25 31.8 20,000 1,379

PART NO.BURST DISC PRESSURE

psi bar

51838 24,000 1,655

51837 27,000 1,861

51836 29,000 2,000

00635 25,000 1,723

54328 18,000 1,241


1 52040 Seal Assy

252043 Base for 52035

51774 Base for 51890

3 See chart Burst Disc

4 51773 Ring

5 51772 Cap

PArT No. 51890

PArT No. 52035

C-18


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

SEVERE SERVICE RELIEF VALVEFor use as a primary relief device to protect waterblast systems and operators from dangerous overpressurization, the Severe Service Relief Valve opens to safely bypass some of the system flow in circumstances where the operating pressure exceeds the factory set opening pressure of the valve.

• Designed for rigorous service and low maintenance.

• Valve constructed with carbide ball and hardened stainless steel seat for long service life.

• Precise machining and cartridge design of ball-seat valve assembly and spring assembly allows quick and simple field repair without disturbing the valve pressure setting.

• Shipped from the factory preset and tested at customer specified opening pressure.

• Factory set opening pressure is stamped into anti-tamper ring which is installed to prevent set pressure from being changed without evidence


PArT No. 52030

PArT No. 50131

PART NO. CONNECTION TYPE* (C)

OVERALL LENGTH (L)

Flats (H)MAX. OPENING

PRESSURE(FACTORY SET)

MAX. WORKING PRESSURE

in mm in mm psi bar psi bar

50131 9/16˝ Medium Pressure Male 6.75 171.5 1.75 44.5 24,000 1,655 20,000 1,379

52030 Jetstream 20K Port Male 6.62 168.1 1.75 44.5 24,000 1,655 20,000 1,379

PArT BreAKDoWN


1 52040 Seal Assembly

250148 Base, 9/16˝ Medium Pressure Male

52042 Base, Jetstream 20K Male Port

3 50133 Ball-Seat Cartridge Assembly

4 50134 Spring Cartridge Assembly

C-19


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

ELECTRONIC HYDRO-THROTTLE THROTTLE CONTROLS (FOR DUMP SYSTEMS)

The Jetstream hydro-throttle automatically reduces the engine to idle speed and relieve the system of high pressure when the dump gun trigger (or foot pedal) is released—saving water and fuel, while reducing wear on the engine and pump.

• Electronic hydro-throttle assembly is standard on current models and includes the actuator assembly, cartridge and electrical plug to connect to the engine control panel

• Replaceable cartridge for fast field service or conversion to another pressure range

TYPE PART NO.

LENGTH(LESS CORD) HOSE CONNECTION

THREAD

DIAMETER WEIGHTMAX. OPERATING

PRESSURE


ELECTRONIC J56372 7.2 182 9/16 J̋S Lance Male 1.75 44.5 1.6 0.7 20,000 1,379

eLecTroNic

53816-00640671 Hose (Required)54570 Kit includes: adapter, and cartridge

related items

For other connection types, see Fittings, Section E.


Hydro-Throttle utilizes a cartridge, to completely rebuild in about 30 seconds. Part No. 51963


1 51963 Cartridge

6

53446 Corded Switch (<2007)

2 26426 O-Ring 56551 Corded Switch (2007-9/2008)

3 53444 Plunger 57970 Corded Switch (>9/2008)

4 25279 Spring 7 53447 Capscrew

5 53443 Body 8 27716 Capscrew

9 27494 Receptacle

PArT BreAKDoWN

C-20


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

MECHANICAL HYDRO-THROTTLE THROTTLE CONTROLS (FOR DUMP SYSTEMS)

The Jetstream hydro-throttle enables the operator to reduce the engine to idle speed and relieve the system of high pressure when the dump gun trigger (or foot pedal) is released—saving water and fuel, while reducing wear on the engine and pump.

• Mechanical hydro-throttle parts can be purchased and include the control unit, cartridge and control cable

• Replaceable cartridge for fast field service or conversion to another pressure range

mecHANicAL

TYPE PART NO.

CONTROL CABLE LENGTH HOSE CONNECTION

THREAD

CONTROL UNIT SIZE(L x W x H)


PRESSURE

ft m in mm lbs kg psi bar

MECHANICAL52050 2 0.6

9/16˝ JS Lance Male 11.7 x 1.75 x 5.6 297 x 44.5 x 142 4 1.8 20,000 1,37952050A 5 1.5

replacement Parts:

51963 Cartridge51903 Control Cable, 2 ft. solid wire51903A Control Cable, 5 ft. braided wire

55256 Kit includes: adapter, cartridge and hose

Reference to Page C-15.


1 51963 Cartridge 12 51887 Friction Adjustment Nut

2-21 52894 Throttle Control Unit 13 51879 Hand Knob

2 26690 Capscrew 14 26688 Pin

3 51877 Body 15 51888 Friction Ring

4 51822 Spring Retainer 16 51908 Face Plate

5 26682 Return Spring 17 25247 Washer

6 54293 Retaining Spring 18 26468 Cotter Pin

7 54272 Adjuster Stop Ring 19 25314 Nut

8 54269 Pressure Adjustment Nut 20 26728 Pivot Terminal

9 54268 Pressure Adjustment Screw 21 51885 Adjustment Screw

10 54271 Thrust Washer22

51903A

51903

5' (1.5m) Ctrl Cable

2' (0.6m) CtrlCable11 26689 Capscrew


Hydro-Throttle utilizes a cartridge, to completely rebuild in about 30 seconds. Part No. 51963

PArT BreAKDoWN

C-21


PU

MP

A

CC

ES

SO

RIE

S

www.waterblast.com

STANDARD FILTERSAvailable for a range of flows to meet all needs, Jetstream filters provide the necessary protection to even the most versatile waterblast system. The severe condition of 20,000 psi pumps require a higher degree of protection, and it is recommended that water is filtered to 10 microns by a primary filter and then by a secondary 1 micron filter before entering the pump.

PART NO.INLET/OUTLET

DRAIN CONNECTIONS

MAX. FLOW RATE

DIMENSIONSWEIGHT

MAX. OPERATING PRESSUREDIAMETER HEIGHT

gpm lpm in mm in mm lb kg psi bar

58368 1 ½˝ / 3˝/ 2˝ NPT - - 18 5/16˝ deep x 47 5/8˝ wide x 50˝ tall 185 83.9 100 6.8

61607 1 ½˝ NPT 40 150 4.0 102 20 510 7.5 3.4 150 10

J70611 2˝ NPT 200 750 8.5 216 36 910 40 18 150 10

FILTER STYLE

BAG DIAMETER BAG LENGTH NOMINAL FILTRATION BAGS (MICRON)

in mm in mm 5 micron

10 micron

25 micron

50 micron

75 micron

58368 7 180 42 1070 71254 J56204 J70917 -

61607 7 180 32 810 27688 26765 26766 27497

J70611 4 100 14 360 28806 26916 25117 25866 25115

PArT No. 58368 GuArDiAN sYsTem PArT No. J70611PArT No. 61607

FiLTer BAGs

related items

58414 Retrofit Float Assy for non-Guardian Water Tanks28519 Low Water Level Switch28480moD Float Valve Modified (plastic floats)

C-22


PU

MP

A

CC

ES

SO

RIE

S

US & Canada: 800-231-8192 or 832-590-1300

PArT BreAKDoWN


1 57853 Float Segment 7 58305 Frame

2 71202 Washer 8 27698 Nut

3 58044 Float Segment 9 29374 Fitting, Bulkhead

4 57856 Screw, Shldr 10 25221 Clamp, Hose

5 58002 Nipple, King 11 58314 Valve Ay, Modified

6 58000 Hose

The new durable design for the fill valve assembly is constructed of stainless steel to withstand the rigor of transport. This valve assembly is used on all Jetstream units and is built to supply water for varying pressures. Part No. 57858

GUARDIAN TANK FILL VALVE ASSEMBLY

PRESSURE GAUGE• 4˝ high visibility face with laminated safety glass dial cover

• Glycerin-filled for protection against pulsation and vibration

• Blow-out back panel pressure relief in the event of Bourdon tube failure for maximum safety

• Pointer zero adjustment

*Anti-vibration gland set not included. **Certified & Calibrated

PART NO. GAUGE TYPEINLET

CONNECTIONRANGE (PSI)

MAX. WORKINGPRESSURE

psi bar

52497 psi 20K Port Male 0-35,000 20,000 1,379

52498* psi 9/16˝ MP Male 0-35,000 20,000 1,379

61627** psi 20K Port Male 0-35,000 20,000 1,379

D-1

Hoses and Lances20,000 PSI

HO

SE

S &

L

AN

CE

S

www.waterblast.com

HOSES & LANCES

HoW To oRdeR JeTsTReaM Hoses & FLeX Lances 28347-aaaBBccX

1

2

3

4

specify series numberInsert dash after Series Number.

specify desired Length in Feet (000 – 999)Example: 050 for a 50 ft. long hose.

specify end Fitting codes (BB & cc)For a hose or lance requiring two different end fittings, list the codes in numerical order when creating the part number.

specify cover options code (X)Leave blank if no cover is desired.Cover Option Codes1 Abrasion Cover Guard2 Burst Shield Guard

28347

aaa

X

BBcc

Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large selection of 25’, 35’ and 50’ hoses and lances are kept in inventory, while a wide variety of lengths can be ordered.

All hoses and flex lances are constructed of a plastic core reinforced with high tensile steel wire and enclosed in a durable, flexible thermoplastic jacket. The smooth plastic core minimizes pressure loss and offers maximum resistance to damage caused by aging, moisture absorption and changing environmental factors. As an added safety benefit, all supply hoses with the abrasion cover spiral will be colored blue. Beginning in 2015, all flex lances supplied will be blue from end to end.

A key element of the thermoplastic supply hose is the heavy-duty abrasion cover. This cover prevents excess damage caused by vibration and movement of the hose on rough or uneven surfaces when connecting from the pump to an intermediary high pressure tool, such as a foot gun.

The flex lances are uncovered lances used for the cleaning of small diameter tubes found in heat exchangers, condensers and boilers. The use of smaller flex lances allows for easy passage through bends due to great flexibility and minimal bend radius.

D-2


HO

SE

S &

L

AN

CE

S

US & Canada: 800-231-8192 or 832-590-1300

THERMOPLASTIC HOSESThese premium hoses provide the most durable and reliable means of connecting system components.

• Constructed of plastic core reinforced by four or six spiral layers of high tensile steel wire enclosed in a tough, flexible polyamide jacket.

• Smooth plastic core minimizes pressure loss and offers the maximum resistance to damage caused by aging, moisture absorbtion, and changing environmental factors.

• Stainless steel end fittings with industry standard connections.

• For special lengths, end fittings, or cover options, see custom order instructions on page D-4.

• See pages I-8–I-9 for pressure drop graphs.

PART NO.END FITTING

CONNECTIONS*

LENGTH INSIDE DIAMETER MAX. OPERATING PRESSURE MINIMUM BEND RADIUS

ft m in mm psi bar in mm

29120-02544441 1-5/16˝ Type M Female 25 7.6 .74 18.8 20,300 1,400 13.8 350

29120-05044441 1-5/16˝ Type M Female 50 15.2 .74 18.8 20,300 1,400 13.8 350

29120-02530301 1˝ MP Tube Nipple 25 7.6 .74 18.8 20,300 1,400 13.8 350

29120-05030301 1˝ MP Tube Nipple 50 15.2 .74 18.8 20,300 1,400 13.8 350

28347-02542421 1" Type M Female 25 7.6 .50 12.8 20,300 1,400 8.0 200

28347-05042421 1˝ Type M Female 50 15.2 .50 12.8 20,300 1,400 8.0 200

28347-02529291 3/4˝ MP Tube Nipple 25 7.6 .50 12.8 20,300 1,400 8.0 200

28347-05029291 3/4˝ MP Tube Nipple 50 15.2 .50 12.8 20,300 1,400 8.0 200

28347-02528281 9/16˝ MP Tube Nipple 25 7.6 .50 12.8 20,300 1,400 8.0 200

28347-05028281 9/16˝ MP Tube Nipple 50 15.2 .50 12.8 20,300 1,400 8.0 200

70941-05042421 1˝ Type M Female 50 15.2 .50 12.8 20,400 1,406 7.8 198

53816-02540401 3/4˝ Type M Female 25 7.6 .32 8.0 21,750 1,500 8.0 200

53816-05040401 3/4˝ Type M Female 50 15.2 .32 8.0 21,750 1,500 8.0 200

53816-02528281 9/16˝ MP Tube Nipple 25 7.6 .32 8.0 21,750 1,500 8.0 200

53816-05028281 9/16˝ MP Tube Nipple 50 15.2 .32 8.0 21,750 1,500 8.0 200

51954-02539391 9/16˝ Type M Female 25 7.6 .25 6.3 21,750 1,500 7.0 180

51954-05039391 9/16˝ Type M Female 50 15.2 .25 6.3 21,750 1,500 7.0 180

28690-0504040 3/4˝ Type M Female 50 15.2 .39 9.9 21,750 1,500 7.8 198

*See details on all connection types beginning on page I-2. Medium Pressure (MP) Tube Nipple connections do not include gland nuts and collars.

D-3


HO

SE

S &

L

AN

CE

S

www.waterblast.com

FLEX LANCESFlex lances are uncovered hoses used for the cleaning of small diameter tubes such as those found in heat exchangers, condensers, and boilers.

• Flex lances have a small minimum bend radius which allows them to pass through bends in the tubes.

• Constructed of plastic core reinforced by four spiral layers of high tensile steel wire enclosed in a tough, flexible polyamide jacket.

• Smooth plastic core minimizes pressure loss and offers the maximum resistance to damage caused by aging, moisture absorption, and changing environmental factors.

• Stainless steel end fittings.


• Custom lengths and end fitting combinations are available upon request.

*Specify flex lance length in feet. For example, specify “050” for a fifty foot long flex lance.**See details on end fittings for these assemblies on page D-5 and specifications for all connection types beginning on page I-2.***Outside diameter of end fitting sleeve on nozzle end of flex lance.

PART NO.* XXX = LENGTH (ft)

END FITTING CONNECTIONS**INSIDE

DIAMETEROUTSIDE

DIAMETER***MAX. OPERATING

PRESSUREMIN. BEND

RADIUS

INLET SIDE NOZZLE SIDE in mm in mm psi bar in mm

28690-XXX4052 3/4˝ Type M Female 9/16˝ MP Nozzle Nipple LH .39 9.9 .72 18.4 21,750 1,500 7.8 198


53816-XXX4075 3/4˝ Type M Female 9/16˝ MP Nozzle Nipple RH .32 8.0 .67 17.0 21,750 1,500 8.0 200

53816-XXX4067 3/4˝ Type M Female 9/16˝ JS Lance Female .32 8.0 .74 18.8 21,750 1,500 8.0 200

53816-XXX6767 3/4˝ JS Lance Female 9/16˝ JS Lance Female .32 8.0 .74 18.8 21,750 1,500 8.0 200












51952-XXX6565 ¼˝ JS Lance Female 1/4˝ JS Lance Female .16 4.0 .50 12.7 31,320 2,160 5.0 130



D-4


HO

SE

S &

L

AN

CE

S

US & Canada: 800-231-8192 or 832-590-1300

THERMOPLASTIC HOSES & FLEX LANCESCUSTOM ORDERAll Jetstream 20,000 psi thermoplastic hoses and flex lances are available in custom lengths or with special end fitting combinations or covers. Common lengths and configurations are available on the two preceding pages.

• Constructed of plastic core reinforced by four or six spiral layers of high tensile steel wire enclosed in a tough, flexible polyamide jacket.

• Smooth plastic core minimizes pressure loss and offers the maximum resistance to damage caused by aging, moisture absorbtion, and changing environmental factors.

• Stainless steel end fittings.


• Use charts and instructions below to build a custom hose or flex lance.

PART NO.

INSIDE DIAMETER (A)

OUTSIDE DIAMETER (B)

BURST PRESSURE


MINIMUM BEND RADIUS

WEIGHT

in mm in mm psi bar psi bar in mm lbs/ft kg/m

29120 .74 18.8 1.24 31.4 50,760 3,500 20,300 1,400 13.8 350 1.29 1.92

28347 .50 12.7 .87 22.0 50,760 3,500 20,300 1,400 8.0 200 .59 .88

28690 .39 9.9 .72 18.4 55,100 3,799 21,750 1,500 7.8 200 .46 .69

53816 .32 8.0 .57 14.6 55,100 3,800 21,750 1,500 8.0 200 .26 .39

51954 .25 6.3 .50 12.7 55,100 3,800 21,750 1,500 7.0 180 .20 .30

51953 .20 5.0 .44 11.2 65,250 4,500 26,100 1,800 6.0 150 .18 .26

51952 .16 4.0 .41 10.4 78,300 5,400 31,320 2,160 5.0 130 .16 .23

28699 .13 3.4 .31 8.0 72,500 5,000 29,000 2,000 4.3 110 .09 .13

70941 .50 12.8 .88 22.3 N/A N/A 20,400 1,406 7.8 200 .63 .28

*Outside diameter shown is for hose material. For maximum OD, see sleeve diameters listed in charts on the following page.

Hose coVeR oPTIonsabrasion cover Guard (code 1)Constructed of a clear PVC or heavy-duty vinyl and reinforced with a rigid helix coil. The Abrasion Cover Guard helps protect the hose from excessive wear due to scuffing or rough surfaces, and also provides additional protection from external objects.

Burst shield Guard (code 2)Constructed of steel wire reinforced heavy-duty synthetic rubber. The Burst Shield Guard helps protect the user and/or surrounding areas from hose failures.

D-5


HO

SE

S &

L

AN

CE

S

www.waterblast.com

END FITTINGSUse the information contained in the charts below to select the fitting codes for the connection types desired. See specifications for all connection types beginning on page I-2.

MEDIUM PRESSURE TUBE NIPPLESMale left-hand threaded end fittings designed for connection to other medium pressure fittings and ports using the appropriate gland nuts and collars.

TYPE M FEMALEHOSE

SERIES NO.CONNECTION CODE

LENGTH (L) SLEEVE OD (D)

in mm in mm

29120 1 5/16˝ Type M (M-21) 44 4.29 109 1.69 42.9

28347 1˝ Type M (M-16) 42 3.70 94 1.16 29.5

70941 1˝ Type M (M-16) 42 3.70 94 1.16 29.5

53816 3/4˝ Type M (M-12) 40 3.37 86 .80 20.3

28690 3/4˝ Type M (M-12) 40 3.37 86 .80 20.3

51954 9/16˝ Type M (M-9) 39 2.80 71 .65 16.4

51953 9/16˝ Type M (M-9) 39 2.76 70 .61 15.5

51952 9/16˝ Type M (M-9) 39 2.77 70 .58 14.7

HOSE SERIES NO.

CONNECTION CODELENGTH (L) SLEEVE OD (D)

in mm in mm

29120 1˝ MP Tube LH 30 6.00 152 1.69 42.9

283473/4˝ MP Tube LH 29 5.36 136 1.16 29.5

9/16˝ MP Tube LH 28 4.67 119 1.16 29.5

53816 9/16˝ MP Tube LH 28 4.10 104 .80 20.3

51954 3/8˝ MP Tube LH 27 3.55 90 .65 16.4

51953

9/16˝ MP Tube LH 28 4.06 103 .61 15.5

3/8˝ MP Tube LH 27 3.54 90 .61 15.5

1/4˝ MP Tube LH 26 3.27 83 .61 15.5

51952

3/8˝ MP Tube LH 27 3.62 92 .58 14.7

1/4˝ MP Tube LH 26 3.31 84 .58 14.7

1/4˝ MP Tube RH 79 1.82 46 .49 12.5

28690 9/16˝ MP Tube LH 72 4.06 103 .61 15.5

28699 9/16˝ MP Tube LH 70 4.06 103 .61 15.5

D-6


HO

SE

S &

L

AN

CE

S

US & Canada: 800-231-8192 or 832-590-1300

MEDIUM PRESSURE NOZZLE NIPPLESConnect directly to nozzles with female left or right hand medium pressure tube connections.

HOSE SERIES NO.

SIZECODE LENGTH (L) SLEEVE OD (D)

LH RH in mm in mm

53816 9/16˝ MP Tube 72 75 2.36 60 .67 17.0

51954 3/8˝ MP Tube 71 74 2.10 53 .57 14.4

519533/8˝ MP Tube 71 74 2.05 52 .49 12.5

1/4˝ MP Tube 70 73 1.82 46 .49 12.5

51952 1/4˝ MP Tube 70 73 1.82 46 .45 11.4

JETSTREAM LANCE FEMALEHOSE

SERIES NO.CONNECTION CODE

LENGTH (L) SLEEVE OD (D)

in mm in mm

53816 9/16˝ JS Lance Female 67 2.06 52 .74 18.8

51954 3/8˝ JS Lance Female 66 1.72 44 .62 15.7

51953 3/8˝ JS Lance Female 66 1.70 43 .57 14.5

51952 1/4˝ JS Lance Female 65 1.50 38 .50 12.7

D-7


HO

SE

S &

L

AN

CE

S

www.waterblast.com

PART NO.*XX = LENGTH (FT)

CONNECTION TYPES*OUTSIDE

DIAMETERINSIDE

DIAMETERMAX. OPERATING

PRESSURELENGTH

CONNECTION 1 (C1) CONNECTION 2 (C2) in mm in mm psi bar ft m

54731-XX 3/4˝ MP Tube LH 3/4˝ MP Tube LH .740 18.8 .438 11.1 20,000 1,379 25 7.62

54732-XX 3/4˝ MP Tube LH 3/4˝ MP Tube RH .740 18.8 .438 11.1 20,000 1,379 25 7.62

54733-XX 3/4˝ MP Tube RH 3/4˝ MP Tube RH .740 18.8 .438 11.1 20,000 1,379 25 7.62


23-54223-30 9/16˝ MP Tube LH 9/16˝ MP Tube LH .553 14.0 .312 7.9 20,000 1,379 30 9.14


54801-XX 9/16˝ MP Tube LH 9/16˝ JS Lance .553 14.0 .312 7.9 20,000 1,379 35 10.66


54803-XX 9/16˝ MP Tube RH 9/16˝ JS Lance .553 14.0 .312 7.9 20,000 1,379 35 10.66

51936-XX 9/16˝ JS Lance 9/16˝ JS Lance .553 14.0 .312 7.9 20,000 1,379 35 10.66



23-54387-30 3/8˝ MP Tube LH 3/8˝ MP Tube RH .368 9.3 .203 5.2 20,000 1,379 30 9.14











RIGID LANCES• For use in manual or automatic tube cleaning applications.

• Machined from high tensile strength, cold drawn stainless steel.

• Three connection types available:

• Left Hand Medium Pressure Tubing (MP Tube LH) Can be used with glands and collars or with tube nozzles. Available in 1/4˝ to 3/4˝ sizes.

• Right Hand Medium Pressure Tubing (MP Tube RH). Available in 1/4˝ to 3/4˝ sizes.

• Jetstream Lance Connections (JS Lance). Available in 1/4˝, 3/8˝, & 9/16˝ sizes.

• See page pressure drop graphs on the next page.

To order:

use five digit part number followed by a

dash (-) and length in feet (up to 25 ft).


MP TUBE LH CONNECTION MP TUBE RH CONNECTION JS LANCE CONNECTION

E-1

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

*See details on all connection types beginning on page I-2

FITTINGS

THREAD LUBRICANTSThread Lubricants prevent threaded connections from galling together or seizing up.

Part no. 27721Blue Goop Thread Lubricant2 oz. Tube

Part no. 28197 Nickel-Based Anti-Seize1 LB. Brush Top Can

Part no. 61647TS-74 Yellow Thread Lubricant12 oz. Can

Part no. 61553 6 oz. Tube— Not shown

Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard thread sizes. A benefit that Jetstream brings to the fittings realm is the invention of our proprietary 20K Port fitting. This connector was specially designed to help prevent leakage and wear at the fluid end manifold.

Part no. 29057Silver-Based Anti-Seize7 oz. Stick

E-2

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

PORT MALE NIPPLE

Replacement Parts52040 20K Seal51929 Jam Nut59915 20K Seal Removal Tool

PART NO.CONNECTION TYPE MAX. OPERATING PRESSURE

CONNECTION 1 CONNECTION 2 psi bar

52209 20K Port Male 20K Port Male 20,000 1,379

PORT MALE TO QUICK DISCONNECT MALE ADAPTER

Replacement Part52040 20K Seal59915 20K Seal Removal Tool



51917 20K QD Female 20K Port Male 20,000 1,379

PORT MALE TO QUICK DISCONNECT FEMALE ADAPTER

Replacement Parts52040 20K Seal52438 Locking Ring59915 20K Seal Removal Tool



52041 20K QD Female 20K Port Male 20,000 1,379

PORT MALE TO MEDIUM PRESSURE FEMALE ADAPTERS

Replacement Parts52040 20K Seal51929 Jam Nut59915 20K Seal Removal Tool



54737 3/4˝ MP Female 20K Port Male 20,000 1,379

52044 9/16˝ MP Female 20K Port Male 20,000 1,379

E-3

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

PORT MALE TO MEDIUM PRESSURE MALE ADAPTERS

PORT PLUG

PORT FEMALE TO QUICK DISCONNECT MALE ADAPTER

PORT MALE TO MEDIUM PRESSURE MALE ADAPTERS



54738 3/4˝ MP Male 20K Port Male 20,000 1,379

52354 9/16˝ MP Male 20K Port Male 20,000 1,379

PART NO. CONNECTION TYPEMAX. OPERATING PRESSURE

psi bar

52076 20K Port Male 20,000 1,379



53038 20K QD Male 20K Port Female 20,000 1,379



54749* 1 5/16˝ Type M Male 20K Port Male 20,000 1,379

53284* 1˝ Type M Male 20K Port Male 20,000 1,379

54741* 3/4˝ Type M Male 20K Port Male 20,000 1,379

54739* 9/16˝ Type M Male 20K Port Male 20,000 1,379

*See page H-2 for other color coded parts.



*Color Coded Fittings 53284-B 54741-B 54739-B



E-4

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

MULTI-PORT ADAPTER

MULTI-PORT ADAPTER

PORT FEMALE TO MEDIUM PRESSURE FEMALE ADAPTERS

PORT FEMALE TO TYPE M MALE ADAPTERS



54746 3/4˝ MP Female 20K Port Female 20,000 1,379

53037 9/16˝ MP Female 20K Port Female 20,000 1,379



54743 1˝ Type M Male 20K Port Female 20,000 1,379

54744 3/4˝ Type M Male 20K Port Female 20,000 1,379

54748 9/16˝ Type M Male 20K Port Female 20,000 1,379



52073 20K Port Male 20K Port Female 20,000 1,379


psi bar

54747 20K Port Female 20,000 1,379

This fitting has a male 20K Port Connection that fits into a discharge port of the 20,000 psi UNx Fluid End and two female port outlet connections to split flow or add an accessory device. Ideal for shut-in (regulator operated systems).

E-5

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

HIGH PRESSURE HHP MALE TO PORT FEMALE



62288 HHP Male 20K Port Female 20,000 1,379

HIGH PRESSURE HHP MALE TO TYPE M MALE ADAPTERS



54844 HHP Male 1 5/16˝ Type M Male 20,000 1,379

55296 HHP Male 1˝ Type M Male 20,000 1,379

HIGH PRESSURE HHP MALE TO MEDIUM PRESSURE FEMALE ADAPTER



54846 HHP Male 1˝ MP Female 20,000 1,379

62290 HHP Male 9/16˝ MP Male 20,000 1,379

HIGH PRESSURE HHP MALE TO JETSTREAM LANCE FEMALE ADAPTER



54938 HHP Male 9/16˝ JS Lance Female 20,000 1,379

No image available

HIGH PRESSURE HHP MALE TO METRIC



61503 HHP Male Metric M36 Male 20,000 1,379

E-6

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

QUICK DISCONNECT FEMALE TO MEDIUM PRESSURE MALE ADAPTERS

QUICK DISCONNECT FEMALE TO TYPE M MALE ADAPTERS



52187 3/4˝ MP Male 20K QD Female 20,000 1,379

52038 9/16˝ MP Male 20K QD Female 20,000 1,379



52189 1˝ Type M Male 20K QD Female 20,000 1,379

52188 3/4˝ Type M Male 20K QD Female 20,000 1,379

52668 9/16˝ Type M Male 20K QD Female 20,000 1,379



QUICK DISCONNECT FEMALE TO MEDIUM PRESSURE FEMALE ADAPTERS



52193 3/4˝ MP Female 20K QD Female 20,000 1,379

52039 9/16˝ MP Female 20K QD Female 20,000 1,379


E-7

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

QUICK DISCONNECT MALE TO MP TUBE LANCE FEMALE ADAPTER

QUICK DISCONNECT MALE TO MEDIUM PRESSURE MALE ADAPTERS



54753 1˝ MP Male 20K QD Male 20,000 1,379

52179 3/4˝ MP Male 20K QD Male 20,000 1,379

52031 9/16˝ MP Male 20K QD Male 20,000 1,379



51912 20K QD Male 3/8˝ MP Tube Female 20,000 1,379


No image available

QUICK DISCONNECT FEMALE TO METRIC MALE ADAPTER



53219 Metric Male 24 x 1.5 20K QD Female 20,000 1,379

QUICK DISCONNECT MALE TO TYPE M MALE ADAPTERS



52182 1˝ Type M Male 20K QD Male 20,000 1,379

52181 3/4˝ Type M Male 20K QD Male 20,000 1,379

52667 9/16˝ Type M Male 20K QD Male 20,000 1,379

E-8

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

QUICK DISCONNECT MALE FLEX LANCE CONNECTORSConnect flex lances that feature female Jetstream Lance Connections to hoses that have Jetstream Quick Disconnect end fittings.

PART NO.CONNECTION TYPE



53967 20K QD Male 9/16˝ JS Lance Male 20,000 1,379

51916 20K QD Male 3/8˝ JS Lance Male 20,000 1,379

QUICK DISCONNECT MALE TO MEDIUM PRESSURE FEMALE ADAPTERS



54752 1˝ MP Female 20K QD Male 20,000 1,379

52191 3/4˝ MP Female 20K QD Male 20,000 1,379

52032 9/16˝ MP Female 20K QD Male 20,000 1,379


QUICK DISCONNECT MALE RIGID LANCE HOLDERS• Connect rigid lances that feature Jetstream Lance connections to hoses

that leave Jetstream Quick Disconnect end fittings

• Support collect prevents lance breakage by reducing stress on lance threads

PART NO.

CONNECTION TYPEREPLACEMENT

PART NO.MAX. WORKING

PRESSURE

CONNECTION 1 CONNECTION 2 COLLETCOLLET

NUT psi bar

52648 20K QD Male 9/16˝ JS Lance Female 52087 52083 20,000 1,379



E-9

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

TYPE M MALE TO MEDIUM PRESSURE MALE CONNECTORS



28330 1 5/16˝ Type M Male 1˝ MP Male 20,000 1,379

28786* 1 5/16˝ Type M Male 3/4˝ MP Male 20,000 1,379

28299 1 5/16˝ Type M Male 9/16˝ MP Male 20,000 1,379

28433 1˝ Type˝ M Male 1˝ MP Male 20,000 1,379

28629* 1˝ Type M Male 3/4˝ MP Male 20,000 1,379

28631 1˝ Type M Male 9/16˝ MP Male 20,000 1,379

29063 3/4˝ Type M Male 1˝ MP Male 20,000 1,379

29064 3/4˝ Type M Male 3/4˝ MP Male 20,000 1,379



29066 9/16˝ Type M Male 1˝ MP Male 20,000 1,379





*Color Coded Fittings 28786-B 28629-BSee page H-2 for other color coded parts.

*Color Coded Fittings29061-B29058-BSee page H-2 for other color coded parts.

TYPE M MALE CONNECTORS



29058* 1 5/16˝ Type M Male 1 5/16˝ Type M Male 20,000 1,379

29059 1 5/16˝ Type M Male 1˝ Type M Male 20,000 1,379

29060 1 5/16˝ Type M Male 3/4˝ Type M Male 20,000 1,379

29061* 1˝ Type M Male 1˝ Type M Male 20,000 1,379

28854 1˝ Type M Male 7/8˝ Type M Male 20,000 1,379



28196 3/4˝ Type M Male 3/4˝ Type M Male 20,000 1,379



TYPE M MALE TO NPT MALE ADAPTER



29342 1˝ Type M Male 1/2˝ NPT Male 15,000 1,000

E-10

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

SCREW TYPE QUICK CONNECT COUPLINGSAll medium pressure couplings include gland, nuts, and collars.

PART NO. CONNECTION TYPECOUPLING HALVES MAX. OPERATING PRESSURE

FEMALE MALE psi bar

54754* 1˝ Type M Male 54762 54763 20,000 1,379

54767 3/4˝ Type M Male 54758 54764 20,000 1,379

54768 9/16˝ Type M Male 54761 54766 20,000 1,379

56547 3/4˝ Type M Male 56616 56614 20,000 1,379

*Color Coded Fittings54754-BSee page H-2 for other color coded parts.

Replacement Parts54789 Seal Kit25690 Retaining Ring

MEDIUM PRESSURE MALE CONNECTORSAll medium pressure couplings include gland, nuts, and collars.



29085 1˝ MP Male 1˝ MP Male 20,000 1,379

29086 1˝ MP Male 3/4˝ MP Male 20,000 1,379

29087 1˝ MP Male 9/16˝ MP Male 20,000 1,379

29088 3/4˝ MP Male 3/4˝ MP Male 20,000 1,379

29089 3/4˝ MP Male 9/16˝ MP Male 20,000 1,379

29090 3/4˝ MP Male 3/8˝ MP Male 20,000 1,379

29091 9/16˝ MP Male 9/16˝ MP Male 20,000 1,379

29092 9/16˝ MP Male 3/8˝ MP Male 20,000 1,379

29093 9/16˝ MP Male 1/4˝ MP Male 20,000 1,379

28191 3/8˝ MP Male 3/8˝ MP Male 20,000 1,379

28190 3/8˝ MP Male 1/4˝ MP Male 20,000 1,379

29094 1/4˝ MP Male 1/4˝ MP Male 20,000 1,379

02173 9/16˝ MP Male 9/16˝ HP Male 20,000 1,379

E-11

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

MEDIUM PRESSURE CROSSES

MEDIUM PRESSURE TEES

MEDIUM PRESSURE ELBOWS

PART NO. CONNECTION TYPE


psi bar

28301 1˝ MP Female 20,000 1,379

29067 3/4˝ MP Female 20,000 1,379

27969 9/16˝ MP Female 20,000 1,379

29068 3/8˝ MP Female 20,000 1,379

29069 1/4˝ MP Female 20,000 1,379



psi bar

29070 1˝ MP Female 20,000 1,379

29071 3/4˝ MP Female 20,000 1,379

27966 9/16˝ MP Female 20,000 1,379

27964 3/8˝ MP Female 20,000 1,379

29072 1/4˝ MP Female 20,000 1,379



psi bar

29073 1˝ MP Female 20,000 1,379

29074 3/4˝ MP Female 20,000 1,379

28184 9/16˝ MP Female 20,000 1,379

27997 3/8˝ MP Female 20,000 1,379

29075 1/4˝ MP Female 20,000 1,379

All medium pressure crosses include gland, nuts, and collars.

All medium pressure tees include gland, nuts, and collars.

All medium pressure elbows include gland, nuts, and collars.

E-12

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

MEDIUM PRESSURE STRAIGHT COUPLINGSAll medium pressure couplings include gland, nuts, and collars.



28341 1˝ MP Female 1˝ MP Female 20,000 1,379

29076 1˝ MP Female 3/4˝ MP Female 20,000 1,379

29077 1˝ MP Female 9/16˝ MP Female 20,000 1,379

28382 3/4˝ MP Female 3/4˝ MP Female 20,000 1,379









MEDIUM PRESSURE UNION COUPLINGSUnion couplings feature a removable seat insert that allows the fitting to slip over one end of the tubing for ease installation in confined spaces or rigid piping applications. All medium pressure couplings include gland, nuts, and collars.


psi bar

29081 1˝ MP Female 20,000 1,379

29082 3/4˝ MP Female 20,000 1,379

29083 9/16˝ MP Female 20,000 1,379

29084 3/8˝ MP Female 20,000 1,379

29119 1/4˝ MP Female 20,000 1,379

E-13

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

MEDIUM PRESSURE MALE TO MEDIUM PRESSURE FEMALE CONNECTIONS

MEDIUM PRESSURE ANTI-VIBRATION GLAND ASSEMBLIES

MEDIUM PRESSURE GLAND, NUTS, COLLARS, AND PLUGS

Fittings include gland nut and collar for female connection.

Used to reduce stress on tubing threads in conditions where bending or vibration are present, anti-vibration gland assemblies feature a collet that clamps onto the tubing when the connection is tightened to provide extra support and strenght.



29095 1˝ MP Male 3/4˝ MP Female 20,000 1,379

28797 1˝ MP Male 9/16˝ MP Female 20,000 1,379

28462 3/4˝ MP Male 9/16˝ MP Female 20,000 1,379

29096 3/4˝ MP Male 3/8˝ MP Female 20,000 1,379

28186 9/16˝ MP Male 3/8˝ MP Female 20,000 1,379

28726 9/16˝ MP Male 1/4˝ MP Female 20,000 1,379

29097 3/8˝ MP Male 1/4˝ MP Female 20,000 1,379

PART NO. CONNECTION TYPE COLLAR PART NUMBER

29103 1˝ MP Male 28732

29104 3/4˝ MP Male 28384

28268 9/16˝ MP Male 26635

29105 3/8˝ MP Male 28180

29106 1/4˝ MP Male 29099

CONNECTION TYPE*PART NUMBERS

GLAND NUT COLLAR PLUG

1˝ MP Male 28731 28732 29100

3/4˝ MP Male 28383 28384 29101

9/16˝ MP Male 26645 26635 27973

3/8˝ MP Male 28181 28180 28229

1/4˝ MP Male 29098 29099 29102

GLAND NUT

COLLAR

PLUG

E-14

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

MEDIUM PRESSURE MALE TO NPT MALE CONNECTORS



27971 9/16˝ MP Male 1/2˝ NPT Male 15,000 1,000

28261 3/4˝ MP Male 1/2˝ NPT Male 15,000 1,000

29253 3/4˝ MP Male 3/4˝ NPT Male 15,000 1,000

29669 3/4˝ MP Male 1˝ NPT Male 15,000 1,000

28610 3/8˝ MP Male 1/4˝ NPT Male 15,000 1,000

28003 3/8˝ MP Male 1/2˝ NPT Male 15,000 1,000

MEDIUM PRESSURE FEMALE TO NPT MALE ADAPTERS



28092 9/16˝ MP Female 1/2˝ NPT Male 15,000 1,000

No image available

E-15

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

NIPPLES• High tensile strength, cold drawn stainless steel

• Glands and collars not included

• Three connection types available

Left Hand Medium Pressure tubing (MP tube LH): Used in standard medium pressure connections (using glands and collars) or with lance fittings (no glands and collars) or tube nozzles that have medium pressure left-handed female threads. Available in 1/4˝ to 1˝ sizes.

Right Hand Medium Pressure tubing (MP tube RH): Used with lance fittings (no glands and collars) or tube nozzles that have medium pressure right-handed female threads. Available in 1/4˝ to 3/4˝ sizes.

Jetstream Lance Connections (Js Lance): Right-handed connections for use with Jetstream's popular tube nozzles and lance fittings. Available in 1/4˝, 3/8˝, and 9/16˝ sizes.

tO ORDER: Use five digit part number corresponding to the desired connection types, followed by a dash (-), and ending with two digits representing the length, in inches.

EXAMPLE: A 6˝ nipple with a 9/16˝ MP Tube LH connection on one end and a 9/16˝ JS Lance connection on the other would be ordered as part no. 53279-06.

MP TUBE LH CONNECTION

MP TUBE RH CONNECTION

JS LANCE CONNECTION

PART NO.Specify length in inches, in place of "XX"

CONNECTION TYPESOUTER

DIAMETERINNER

DIAMETERMAX. WORKING

PRESSURELENGTH

CONNECTION 1 CONNECTION 2 in mm in mm psi bar in mm

29013-XX 1˝ MP Tube LH Male 1˝ MP Tube LH Male .990 25.1 .688 17.5 20,000 1,379 3-24 76-609

29108-XX 3/4˝ MP Tube LH Male 3/4˝ MP Tube LH Male .740 18.8 .438 11.1 20,000 1,379 3-24 76-609

29109-XX 3/4˝ MP Tube LH Male 3/4˝ MP Tube RH Male .740 18.8 .438 11.1 20,000 1,379 3-24 76-609

29110-XX 3/4˝ MP Tube RH Male 3/4˝ MP Tube RH Male .740 18.8 .438 11.1 20,000 1,379 3-24 76-609



53279-XX 9/16˝ MP Tube LH Male 9/16˝ JS Lance Male .553 14.0 .312 7.9 20,000 1,379 3-24 76-609


54782-XX 9/16˝ MP Tube RH Male 9/16˝ JS Lance Male .553 14.0 .312 7.9 20,000 1,379 3-24 76-609

53063-XX 9/16˝ JS Lance Male 9/16˝ JS Lance Male .553 14.0 .312 7.9 20,000 1,379 3-24 76-609













E-16

Fittings20,000 PSI

FIT

TIN

GS

www.waterblast.com

LANCE CLOSE NIPPLES

SLIMLINE MALE TO FEMALE TUBE ADAPTERS

MEDIUM PRESSURE RIGID LANCE HOLDERS

• Used to connect tube cleaning nozzles, fittings, and lances that have Jetstream Lance connections

• Wrench flats for easy connection and removal

Used to connect components with female Jetstream Lance connectors to those with male left-handed medium pressure tubing connections without the use of glands and collars.

The Jetstream medium pressure rigid lance holder is used to provide reduced stress on the rigid lance to flexible lance connection, greatly reducing lance breakage and increasing safety. The rigid lance is inserted into the support tube and screwed into the female threaded connection.


MAX. OUTER DIAMETER


CONNECTION 1 CONNECTION 2 in mm psi bar

53221 9/16˝ JS Lance Male 9/16˝ JS Lance Male .750 19.1 20,000 1,379







MAX. OUTER DIAMETER



52552 9/16˝ JS Lance Male 9/16˝ MP Tube LH Female .750 19.1 20,000 1,379






29116 9/16˝ MP Female 9/16˝ MP Tube LH Female 20,000 1,379



E-17

Fittings20,000 PSI

FIT

TIN

GS

US & Canada: 800-231-8192 or 832-590-1300

SLIMLINE LANCE COUPLINGS• Used to couple rigid and flex lances without the use of glands and

collars to allow them to fit into tubes

• Additional couplings available upon request


MAX. OUTER DIAMETER



28668 9/16˝ MP Tube LH Female 9/16˝ MP Tube LH Female .750 19.1 20,000 1,379

29111 9/16˝ MP Tube LH Female 9/16˝ MP Tube RH Female .750 19.1 20,000 1,379

52767 9/16˝ MP Tube LH Female 9/16˝ JS Lance Female .750 19.1 20,000 1,379

29112 9/16˝ MP Tube RH Female 9/16˝ MP Tube RH Female .750 19.1 20,000 1,379

52766 9/16˝ JS Lance Female 9/16˝ JS Lance Female .750 19.1 20,000 1,379














F-1

Guns20,000 PSI

GU

NS

www.waterblast.com

CONTROL GUNSControl guns are a necessity in any hand lancing application. Jetstream offers several options control guns for 20,000 psi waterblasting.

DuRAsAFE (sTAnDARD AnD FIELD-REPAIRABLE) HAnD Guns

Designed with safety, comfort and simplicity in mind, the 20,000 psi control guns are used for a variety of surface cleaning applications. The DCP models feature fully adjustable body pads for maximum operator comfort in any position (shoulder, hip, chest, etc.). The DCPx models showcase an ergonomically designed shoulder stock. In addition to the standard welded guns, Jetstream offers a field repairable option for barrel replacement to be performed in the field. Both standard and field repairable guns are offered in single or dual trigger, dump or shut-in style and color-coded.

ZERO-THRusT

The Zero-Thrust gun is designed for underwater cleaning in a marine environment, primarily. Due to no thrust, the operator is able to sustain a standard distance from the material needed to be cleaned without being propelled away.

DuRAsAFE FOOT Guns

The Durasafe foot gun is ideal for numerous tube cleaning applications. A recent upgrade was the larger opening for easier boot clearance, which is now standard on all Jetstream foot guns. Both dump or shut-in style and color-coding is available on the foot guns.

• Fast field replaceable cartridge design for minimal downtime

• All pressure bearing components are stainless steel

• Zinc-plated base and cage for corrosion resistance

F-2

Guns20,000 PSI

GU

NS

US & Canada: 800-231-8192 or 832-590-1300

DuraSafe™ 20,000 psi hand-operated dump style control guns allow the operator to have complete control of the pressure at all times. Designed with safety, comfort, and simplicity in mind, they are used for a variety of surface cleaning applications and are available in four standard configurations.


• 48˝ distance from primary trigger to end of barrel to ensure maximum operator safety.**

• Lightweight.

• DCP models feature fully adjustable body pad for maximum operator comfort in any position (shoulder, hip, chest, etc.), while an ergonomically designed shoulder stock is included with DCPx models.

• Adjustable secondary grip included with single trigger models.

• Dual trigger models require both triggers to be engaged in order to build system pressure for maximum operator safety.


• Equipped with holder for single nozzle. Ideal for use with the Jetstream Orbi-Jet self-rotating nozzles.

DURASAFE™ HAND GUNSDUMP STYLE

DCPXSI-20

PART NO. 54375

DCPXSI-20

PART NO. 53230

DCPXSI-20

PART NO. 54425

DCPSI-20

PART NO. 53305

*Adapters available for other connection types. See details on all connection types beginning on page I-2.**Custom length barrels available. Call factory for information.

sTAnDARD, WELDED Guns

PART NO. MODEL TRIGGER ACTUATION REST TYPE INLET CONNECTION* OUTLET

CONNECTION

LENGTH** MAX. OPERATING PRESSURE

in mm psi bar

53305 DCP-20 Single Body Pad

20K Port Male 9/16˝ MP Male

71 180 20,000 1,379

54375 DCPx-20 Single Shoulder Stock 66 167 20,000 1,379

53230 DCP-20DD Dual Body Pad 75 190 20,000 1,379

54425 DCPx-20D Dual Shoulder Stock 70 177 20,000 1,379

FuLLY FIELD REPAIRABLE Gun

56988 FR-20SD Single Shoulder Stock 9/16˝ MP 9/16˝ MP Male 66 167 20,000 1,379

BLuE COLOR CODED – FuLLY FIELD REPAIRABLE Gun

61422 FR-20SD Single Shoulder Stock 9/16˝ MP 9/16˝ MP Male 66 167 20,000 1,379

F-3

Guns20,000 PSI

GU

NS

www.waterblast.com

DuRAsAFE™ HAnD GunsDuMP sTYLE

ITEM PART nO. DEsCRIPTIOn ITEM PART nO. DEsCRIPTIOn

1 25193 O-Ring 12 53464 Grip Assembly

2 26635 Collar 13 57065 Rear Barrel

3 26645 Gland 14 57956 Handle Assembly

4 26689 Capscrew 14a 57951 Handle

5 27968-48 Front Panel, 48˝ 14b 59388 Assemble

6 28268 Anti-Vibe Adapter 14c 25295 Pin

7 50124 Shoulder Stock 14d 26116 Pin, Pivot

8 50127 Shoulder Stock Extension 14e 57954 Pin, Trigger

9 51869 Cartridge 15 J55768 Body

10 51874 Nozzle Sleeve 16 61881 Clamp Assembly

11 53175 Cartridge Plug

PART BREAKDOWn

F-4

Guns20,000 PSI

GU

NS

US & Canada: 800-231-8192 or 832-590-1300

DuraSafe™ 20,000 psi hand-operated shut-in style control guns allow the operator to have complete control of the pressure at all times. Designed with safety, comfort, and simplicity in mind, they are used for a variety of surface cleaning applications and are available in standard configurations.

• Shut-in style control guns do not dump water when the trigger is released. Useful in applications where excess water spillage and disposal are concerns. Use with plunger style pumps such as the UNx™ require the installation of a Shut-In Regulator Valve (see page C-12).


• 48˝ distance from primary trigger to end of barrel to ensure maximum operator safety.**

• Lightweight.

• DCPSi model features a fully adjustable body pad for maximum operator comfort in any position (shoulder, hip, chest, etc.)

• DCPxSi model includes an ergonomically designed shoulder stock.

• Adjustable secondary hand grip.


• Equipped with holder for single nozzle. Ideal for use with the Jetstream Orbi-Jet self-rotating nozzles.

DURASAFE™ HAND GUNSSHUT-IN STYLE

*Adapters available for other connection types. See details on all connection types beginning on page I-2.**Custom length barrels available. Call factory for information.

PART NO. MODEL REST TYPE INLET CONNECTION*OUTLET (NOZZLE)

CONNECTIONLENGTH** WEIGHT MAX. OPERATING PRESSURE

in cm lbs kg psi bar

54335 DCPSi-20 Body Pad 20K Port Male 9/16˝ MP Male 71 180 12.3 5.6 20,000 1,379

54395 DCPxSi-20 Shoulder Stock 20K Port Male 9/16˝ MP Male 70 177 11.4 5.2 20,000 1,379

FuLLY FIELD REPAIRABLE Gun

59299 FR-20Si Shoulder Stock 9/16˝ MP Male 9/16˝ MP Male 70 177 11.4 5.2 20,000 1,379

F-5

Guns20,000 PSI

GU

NS

www.waterblast.com

DuRAsAFE™ HAnD Guns sHuT-In sTYLE


1 26635 Collar 11 57000 Body

2 26645 Gland 12 57095 Rear Barrel

3 26689 Capscrew 13 57986 Handle Assembly

4 27968-48 Front Barrel 13a 57958 Handle

5 28268 Anti-Vibe Assembly 13b 57955 Trigger Assembly

6 50124 Shoulder Stock 13c 26116 Pin, Pivot

7 50127 Shoulder Stock Extension 13d 57954 Trigger Pin

8 51874 Nozzle Sleeve 14 60420 Cartridge

9 52543 Cartridge Plug 15 61881 Clamp Assembly

10 53464 Grip Assembly

PART BREAKDOWn

F-6

Guns20,000 PSI

GU

NS

US & Canada: 800-231-8192 or 832-590-1300

ZERO THRUST HAND GUNS


1 25193 O-Ring 11 53175 Cartridge Plug

2 26635 Collar 12 53464 Grip Assembly

3 26645 Gland 13 57095 Rear Barrel

4 26689 Capscrew 13a 57956 Handle Assembly

5 27968-06 Middle Barrel, 6˝ 13b 57951 Handle

6 27968-48 Front Barrel, 48˝ 13c 59388 Trigger Assembly

7 28268 Anti-Vibe Assembly 13d 25295 Pin

8 50511 Sub Sea Tube Baffle 14 26116 Pin, Pivot

9 51869 Cartridge 15 57954 Pin, Trigger

10 51874 Nozzle Sleeve

PART BREAKDOWn

The Zero-Thrust gun is designed for underwater cleaning in a marine environment, primarily. Due to no thrust, the operator is able to sustain a standard distance from the material needed to be cleaned without being propelled away. Part no. 28528

• 30 second field replacement cartridge for minimal downtime

• Corrosion resistant materialPart No. 28528

REPLACEMEnT CARTRIDGE

Zero Thrust Hand Gun utilizes a cartridge, to completely rebuild in about 30 seconds. Part no. 51869

F-7

Guns20,000 PSI

GU

NS

www.waterblast.com

Ideal for a variety of waterblast tube cleaning applications, the DCF-20 DuraSafe™ foot-operated dump style control gun allows the operator to have complete control of the pressure at all times.


• Safest gun in the industry! Custom safety cage and thick blast wall protect operator better than any foot control gun in the industry.


• Built in “wings” protect high pressure and fittings from external damage.


• Zinc-plated base and cage for corrosion resistance.

• Threaded diffuser to route dump water for collection or disposal.

• Color coding (blue) is available as a visual aspect to the foot guns. The color is displayed on both sides to be seen from any angle. (For Visual Safety System items, see pg. H-2.)


DURASAFE™ FOOT GUNSDUMP STYLE

PART NO. MODEL INLET CONNECTION*OUTLET (NOZZLE)

CONNECTIONFLOW

DIMENSIONS (H x W x D)


gpm in cm psi bar

59372 DCF-20 20K Port Female 3/4˝ NPT Female 30-35 8.8 x 16.7 x 9.25 223.5 x 425.4 x 234.9 20,000 1,379

59379 DCF-20 Mag Flow 3/4˝ MP Female 3/4˝ MP Female 50 8.8 x 16.7 x 9.25 200 x 380 x 320 20,000 1,379

PART BREAKDOWn

ITEM PART nO. DEsCRIPTIOn

1 51864 Diffuser

2 51869 Cartridge

3 53369 Body

4 26453 Pin

5 25261 Capscrew

6 55432 Base

7 53373 Pedal

Related Items

Part no. 52390Plug and O-Ring ring for body. Not shown.

F-8

Guns20,000 PSI

GU

NS

US & Canada: 800-231-8192 or 832-590-1300

Ideal for a variety of waterblast tube cleaning applications, the DCFSi-20 DuraSafe™ foot-operated shut-in style control gun allows the operator to have complete control of the pressure at all times.

• Shut-in style control guns do not dump water when the trigger is released. Useful in applications where excess water spillage and disposal are concerns. Use with plunger style pumps such as the UNx™ require the installation of a Shut-In Regulator Valve (see page C-12).


• Safest gun in the industry! Custom safety cage and thick blast wall protect operator better than any foot control gun in the industry.



• Built in “wings” protect high pressure and fittings from external damage.

• Zinc-plated base and cage for corrosion resistance.


DURASAFE™ FOOT GUNSSHUT-IN STYLE

PART NO. MODELINLET & OUTLET CONNECTIONS*

DIMENSIONS (H x W x D)


in cm psi bar

59378 DCFSi-20 20K Port Female 8.8 x 16.7 x 9.2 223.5 x 425.4 x 234.9 20,000 1,379

ITEM PART nO. DEsCRIPTIOn

1 52543 Cartridge Plug

2 60420 CPSi-20 Cartridge

3 54392 Body

4 26453 Pin

5 25261 Capscrew

6 55432 Base

7 53373 Pedal

PART BREAKDOWn

Related Items

Part no. 52390Plug and O-Ring ring for body not shown.

G-1

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

ROTARY, STRAIGHT, PIPE & TUBE CLEANING NOZZLESJetstream provides nozzles for different 20,000 psi applications in surface preparation, pipe cleaning and tube cleaning. All of our nozzles are made of stainless steel, hardened steel, or tungsten carbide and treated to withstand high pressures.

The Orbi-Jet nozzle is a self-powered rotating nozzle that utilizes up to four rotating jets. The four-jet nozzle can run at either four or two nozzles the cleaning needs. A second Orbi-Jet nozzle, with two-jets, is typically used for a harder-hitting applications. Maintenance is made easy through a rebuild kit and by using a magnetic braking system, there is minimal wear.

Jetstream’s HP Series surface cleaning nozzles provide a powerful, stream-lined jet for tough cleaning applications. These nozzles come in carbide and sapphire orifices with a zero degree pattern. (A fifteen degree pattern is also offered in the carbide nozzles.) Many orifice sizes are available.

Pipe cleaning nozzles can adapt to various diameter pipes. Our Rotomag nozzle is a self-powered rotating nozzle designed specifically for larger diameter pipes. For smaller pipes, two static nozzles are available with up to sixteen ports.

Tube cleaning nozzles are drilled for each order and are designed for use at the end of a flex lance or rigid lance. The configurations and flow ratings are customized to each specific request per the job requirements. Jetstream has put together eighteen standard patterns; however, these can be drilled in any pattern requested, once deemed the nozzle will perform efficiently.

NoTe: Jetstream is an authorized distributor for many vendors and offers specialized rotary, abrasive cutting, surface preparation, pipe and tube cleaning nozzles upon request.

G-2

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

The Jetstream Orbi-Jet QCX is a rugged, self-powered, rotating nozzle utilizing up to four straight-pattern, hard-hitting, replaceable nozzles. The nozzle rotor rotates in a 360° pattern to provide maximum surface coverage and superior cleaning.

• Each of the four powerful, cohesive, rotating jets follows a different cleaning path to provide greater coverage and less streaking than a fan tip or single straight nozzle.

• Longer straight-flow passages for superior cutting efficiency.

• Magnetic braking system controls rotational speed for minimal wear and maximum impact without streaking.

• Water provides the rotational motion and creates the bearing on which the nozzle spins. No drive belts or ball bearings to replace!

• Use with Tungsten Carbide oX series nozzles or sapphire UHPX series nozzles.

• Light-weight shroud protects nozzle from damage during operation.

• Rebuild kit allows five minute overhaul of wear components right in the field using two standard hex wrenches.

• Retrofit kit available to convert an existing 20,000 psi Orbi-Jet to the QCX design.


ORBI-JET QCX FOUR-JET SELF-ROTATING SURFACE CLEANING NOZZLE

Most Rotating Nozzles, 2 Nozzles, but only 1 pattern.oRBI-JeT QCX, 4 Nozzles, 4 Patterns Superior Coverage Reduced Streaking.

PART BReAKDoWN

ITeM PART No. DesCRIPTIoN

1 26762 Retaining Ring

2 52157 Shroud

3 52305Rebuild Kit (Items 3a to 3g)

4 52172 Body

5 54277 Rotor

6 28435 Straightening Vane

7 53503 Plug

8 53502 Plug Retainer

9 54276 Retaining Screw

PART NO. INLET CONNECTION*

SPEED RANGE

DIAMETER(LESS SHROUD)

ASSEMBLY LENGTH

ASSEMBLY WEIGHT

MAX. FLOW RATE

(HAND GUN)


RPM in mm in mm lbs kg gpm lpm psi bar

54285 9/16˝ MP Female 1000-1500 2.0 51 3.7 94 2.2 1.0 7.5 28.4 20,000 1,379

G-3

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

OX SERIES—CARBIDE NOZZLES

FoUR oX Nozzles

PART NO.ORIFICE DIAMETER

10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)

No. in mm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm

54331 000 .018 .46 4.0 15.0 4.4 16.5 4.7 17.9 5.1 19.1 5.4 20.3

54332 00 .025 .64 7.1 26.9 7.9 29.8 8.6 32.4 9.2 34.8 9.8 37.1

54333 0 .029 .74 9.5 35.8 10.5 39.8 11.5 43.4 12.3 46.7 13.1 49.7

54334 1 .033 .84 11.9 45.1 13.3 50.2 14.5 54.8 15.6 59.0 16.6 62.9

54336 2 .038 .92 15.6 59.1 17.4 65.8 19.0 71.9 20.5 77.5 21.8 82.7

TWo oX Nozzles

54331 000 .018 .46 2.3 8.6 2.5 9.4 2.7 10.1 2.8 10.7 3.0 11.3

54332 00 .025 .64 3.9 14.6 4.2 16.0 4.6 17.3 4.9 18.5 5.2 19.7

54333 0 .029 .74 5.0 19.1 5.6 21.0 6.0 22.8 6.5 24.5 6.9 26.0

54334 1 .033 .84 6.3 23.7 6.9 26.2 7.5 28.5 8.1 30.6 8.6 32.6

54336 2 .038 .92 8.1 30.7 9.0 34.0 9.8 37.1 10.5 39.9 11.2 42.5

54337 3 .042 1.01 9.8 37.0 10.9 41.1 11.8 44.8 12.7 48.2 13.6 51.4

54338 4 .046 1.11 11.8 44.8 13.2 49.9 14.4 54.4 15.5 58.6 16.5 62.5

ACCessoRIes

oRBI-JeT QCX Nozzles

MAGNeTsPart No. 26758NPart No. 26758s

Nozzle extensionsPart No. 53844

Extensions are installed into the Orbi-Jet QCX Nozzle to provide a wider cleaning pattern and serve as flow straighteners,

further reducing turbulence for more aggressive waterjets. Sold Individually.

CoNVeRsIoN KITPart No. 54275

Includes rotor assembly, retaining screw, and two nozzle port plugs to convert a standard Orbi-Jet to

an Orbi-Jet QCX.

• High productivity carbide nozzles designed for use in the Orbi-Jet QCX.

• Specially engineered carbide orifices provide the most aggressive waterjets available.

• Efficient design reduces turbulence and orifice wear.

• Select nozzles from the charts below by choosing operating pressure, desired flow, and two or four nozzle operation.

WARNING: Flow rates greater than 7.5 gpm (28.4 lpm) are not recommended for use in hand gun cleaning operations with an Orbi-Jet QCX due to excessive thrust.

G-4

Nozzles20,000 PSI

US & Canada: 800-231-8192 or 832-590-1300


UHPX SERIES—SAPPHIRE NOZZLES

FoUR UHPX Nozzles


10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


53643 18 .018 0.46 3.2 12.1 3.5 13.2 3.8 14.3 4.0 15.2 4.3 16.1

53877 19 .019 0.48 3.5 13.2 3.8 14.5 4.1 15.7 4.4 16.7 4.7 17.7

53644 20 .020 0.51 3.8 14.4 4.2 15.8 4.5 17.1 4.8 18.3 5.1 19.4

54017 21 .021 0.53 4.1 15.6 4.5 17.2 4.9 18.6 5.3 19.9 5.6 21.2

54018 22 .022 0.56 4.5 16.9 4.9 18.7 5.3 20.2 5.7 21.7 6.1 23.0

53646 23 .023 0.58 4.8 18.3 5.3 20.2 5.8 21.9 6.2 23.5 6.6 24.9

54019 24 .024 0.61 5.2 19.7 5.8 21.8 6.2 23.6 6.7 25.3 7.1 26.9

53647 25 .025 0.64 5.6 21.2 6.2 23.4 6.7 25.4 7.2 27.3 7.7 29.0

54021 27 .027 0.69 6.4 24.3 7.1 27.0 7.7 29.3 8.3 31.5 8.8 33.5

54297 28 .028 0.71 6.9 26.0 7.6 28.8 8.3 31.3 8.9 33.7 9.5 35.8

53648 29 .029 0.74 7.3 27.7 8.1 30.7 8.8 33.5 9.5 36.0 10.1 38.3

54441 30 .030 0.76 7.8 29.5 8.6 32.7 9.4 35.6 10.1 38.3 10.8 40.8

54022 31 .031 0.79 8.3 31.4 9.2 34.8 10.0 37.9 10.8 40.8 11.5 43.4

53649 33 .033 0.84 9.3 35.2 10.3 39.1 11.3 42.7 12.1 45.9 12.9 48.9

54442 34 .034 0.86 9.8 37.3 10.9 41.4 11.9 45.1 12.8 48.6 13.7 51.8

54443 37 .037 0.94 11.6 43.7 12.8 48.6 14.0 53.0 15.1 57.1 16.1 60.9

54282 38 .038 0.97 12.2 46.0 13.5 51.2 14.7 55.8 15.9 60.1 16.9 64.1

54283 42 .042 1.07 14.7 55.7 16.4 62.0 17.9 67.7 19.3 72.9 20.6 77.8

SapphireOrifice

RadialSeat

3/8-24 UNFThread

• High productivity sapphire nozzles for use in the Orbi-Jet QCX.

• Tapered orifice retainer reduces turbulence and provides a cohesive, aggressive waterjet.

• Sapphire orifices are more durable than carbide.

• Select nozzles from the charts below by choosing operating pressure, desired flow, and two or four nozzle operation.

G-5

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

WARNING: Flow rates greater than 7.5 gpm (28.4 lpm) are not recommended for use in hand gun cleaning operations with an Orbi-Jet QCX due to excessive thrust.

TWo UHPX Nozzles

PART NO.

ORIFICE DIAMETER10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


53647 25 .025 0.64 3.1 11.7 3.4 12.9 3.7 13.9 3.9 14.8 4.1 15.7

54021 27 .027 0.69 3.5 13.3 3.9 14.6 4.2 15.8 4.5 16.9 4.7 17.9

54297 28 .028 0.71 3.7 14.1 4.1 15.5 4.4 16.8 4.7 18.0 5.0 19.1

53648 29 .029 0.74 4.0 15.0 4.4 16.5 4.7 17.9 5.1 19.1 5.4 20.3

54441 30 .030 0.76 4.2 15.9 4.6 17.5 5.0 19.0 5.4 20.3 5.7 21.5

54022 31 .031 0.79 4.4 16.8 4.9 18.5 5.3 20.1 5.7 21.5 6.0 22.8

53649 33 .033 0.84 5.0 18.8 5.5 20.7 5.9 22.5 6.4 24.1 6.8 25.6

54442 34 .034 0.86 5.2 19.8 5.8 21.8 6.3 23.7 6.7 25.4 7.1 27.0

54443 37 .037 0.94 6.1 23.0 6.7 25.4 7.3 27.7 7.8 29.7 8.3 31.6

54282 38 .038 0.97 6.4 24.1 7.1 26.7 7.7 29.0 8.2 31.2 8.8 33.2

54283 42 .042 1.07 7.7 29.0 8.5 32.1 9.2 35.0 9.9 37.6 10.6 40.0

54284 46 .046 1.17 9.1 34.3 10.1 38.1 11.0 41.5 11.8 44.7 12.6 47.6


G-6

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

The Jetstream Orbi-Jet is a rugged, self-powered, rotating nozzle utilizing two straight-pattern, hard-hitting, replaceable nozzles. The nozzle rotor rotates in a 360° pattern to provide maximum surface coverage and superior cleaning.



• Use with Tungsten Carbide oR series nozzles or oRs series sapphire nozzles.

• Light-weight shroud protects nozzle from damage during operation.

• Rebuild kit allows five minute overhaul of wear components right in the field using two standard hex wrenches.

ORBI-JETTWO-JET SELF-ROTATING SURFACE CLEANING NOZZLE

IMPACT + CoVeRAGe = oRBIJeT


PART NO. INLET CONNECTION* SPEED RANGE

DIAMETER (LESS SHROUD)

ASSEMBLY LENGTH

ASSEMBLY WEIGHT

MAX. FLOW RATE

(HAND GUN)



52210 9/16˝ MP Female 1000-1500 2.1 54 3.6 92 2.3 1.0 7.5 28.4 20,000 1,379

ACCessoRIes

Part No. 52320-05Nozzle extensions Extensions are installed into the Orbi-Jet Nozzle to provide a wider cleaning pattern and serve as flow straighteners, further reducing turbulence for more aggressive waterjets. Sold Individually.

ITeM PART No. DesCRIPTIoN ITeM PART No. DesCRIPTIoN

1 26762 Retaining Ring 5 52173 Rotor

2 52157 Shroud 6 26761 Straightening Vane

3 52305 Rebuild Kit (Items 3a to 3g) 7 53503 Plug

4 52156 Body

MAGNeTsPart No. 26758NPart No. 26758s

PART BReAKDoWN

G-7

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

ORS SERIES—SAPPHIRE NOZZLES

• More durable than carbide.

• Designed for use with the Orbi-Jet.

• Other sizes available upon request.

TWo oRs Nozzles


10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


52738 00 .025 .64 3.1 11.7 3.4 12.9 3.7 13.9 3.9 14.8 4.1 15.7

52739 0 .029 .74 4.0 15.0 4.4 16.5 4.7 17.9 5.1 19.1 5.4 20.3

52741 1 .033 .84 5.0 18.8 5.5 20.7 5.9 22.5 6.4 24.1 6.8 25.6

52742 2 .038 .92 6.4 24.1 7.1 26.7 7.7 29.0 8.2 31.2 8.8 33.2

52743 3 .042 1.01 7.7 29.0 8.5 32.1 9.2 35.0 9.9 37.6 10.6 40.0

52744 4 .046 1.11 9.1 34.3 10.1 38.1 11.0 41.5 11.8 44.7 12.6 47.6

52746 5 .055 1.32 11.4 43.2 12.7 48.0 13.8 52.4 14.9 56.4 15.9 60.2

OR SERIES—CARBIDE NOZZLES

• Precision honed carbide orifice.

• Designed for use with the Orbi-Jet.

• Other sizes available upon request.

TWo oR Nozzles


10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


52686 00 .025 .64 3.6 13.6 4.0 15.0 4.3 16.2 4.6 17.3 4.8 18.3

52211 0 .029 .74 4.6 17.6 5.1 19.4 5.5 21.0 5.9 22.5 6.3 23.9

52212 1 .033 .84 5.8 22.1 6.4 24.4 7.0 26.5 7.5 28.4 8.0 30.3

52213 2 .038 .92 7.5 28.5 8.3 31.6 9.1 34.4 9.8 37.0 10.4 39.4

52214 3 .042 1.01 9.1 34.3 10.1 38.1 11.0 41.5 11.8 44.7 12.6 47.6

52215 4 .046 1.11 10.8 40.7 12.0 45.3 13.0 49.4 14.0 53.1 15.0 56.6

52216 5 .055 1.32 15.1 57.2 16.8 63.7 18.4 69.6 19.8 75.0 21.1 80.0

O-Ring CarbideOrificePart No.

26759

WARNING: Flow rates greater than 7.5 gpm (28 lpm) are not recommended for use in hand gun cleaning operations with an Orbi-Jet due to excessive thrust.

O-Ring SapphireOrificePart No. 26759

oRBI-JeT Nozzles

G-8

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

HP0 & HP15—CARBIDE NOZZLES

• Precision honed tungsten carbide inserts for long service life.

• HP0 Series straight pattern nozzles produce highly cohesive, powerful waterjets.

• HP15 Series fan pattern nozzles create wide waterjets without significant reduction in power.

HP0PART NO.

HP15 PART NO.


12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)

no. in mm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm

54868 ** 000 .018 0.46 0.87 4.6 0.98 5.8 1.07 6.9 1.16 8.1 1.24 9.2

54869 ** 00 .025 0.64 1.69 8.9 1.89 11.1 2.07 13.3 2.23 15.6 2.39 17.8

51978 54874 0 .029 0.74 2.27 12.0 2.54 14.9 2.78 17.9 3.00 20.9 3.21 23.9

51979 ** 1 .033 0.84 2.94 15.5 3.29 19.4 3.60 23.2 3.89 27.1 4.16 31.0

51980 53204 2 .038 0.97 3.90 20.5 4.36 25.7 4.78 30.8 5.16 35.9 5.51 41.1

51981 53205 3 .042 1.07 4.76 25.1 5.32 31.4 5.83 37.6 6.30 43.9 6.74 50.2

51982 53206 4 .046 1.17 5.71 30.1 6.39 37.6 7.00 45.1 7.56 52.6 8.08 60.2

51983 53207 5 .055 8.17 43.0 9.13 53.8 10.00 64.5 10.80 75.3 11.55 86.0

51984 53331 6 .063 1.60 10.72 56.4 11.98 70.5 13.12 84.6 14.18 98.8 15.16 112.9

51985 54876 7 .067 1.70 12.12 63.8 13.55 79.8 14.84 95.7 16.03 111.7 17.14 127.7

51986 54877 8 .070 1.78 13.23 69.7 14.79 87.1 16.20 104.5 17.50 121.9 18.71 139.3

51987 54878 9 .073 1.85 14.39 75.8 16.09 94.7 17.62 113.7 19.03 132.6 20.35 151.5

54871 54879 10 .078 1.98 16.43 86.5 18.37 108.1 20.12 129.8 21.73 151.4 23.23 173.0

HP Series Nozzles nozzles produce well defined, hard hitting jets for concentrated, work saving cleaning power.

• Available with Carbide or sapphire orifices.

• Attach directly to the end of any control gun or nipple that uses a 9/16˝ medium pressure male connection.

• 20,000 psi (1,379 bar) maximum working pressure.

HP SURFACE CLEANING NOZZLES

WARNING: Flow rates greater than 7 gpm (26.4 lpm) are not recommended for use in hand gun cleaning operations due to excessive thrust.

**Not Available

NOZZLE SLEEVEPart No. 51874

GLAND NUTPart No. 26645

COLLARPart No. 26635

HP NOZZLE

HP0 - sTRAIGHT JeT

HP15 - 15˚ FAN JeT

G-9

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

WARNING: Flow rates greater than 7 gpm (26.4 lpm) are not recommended for use in hand gun cleaning operations due to excessive thrust.

HPS0—SAPPHIRE NOZZLES

• More durable than tungsten carbide for longer service life and lower operating cost

• HPS0 Series straight pattern nozzles produce extremely cohesive, powerful waterjets.

HPs0 - sTRAIGHT JeT

HPS0PART NO.


12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


54881 000 .018 0.46 0.65 3.4 0.72 4.3 0.79 5.1 0.86 6.0 0.92 6.8

54882 00 .025 0.64 1.25 6.6 1.40 8.2 1.53 9.9 1.65 11.5 1.77 13.2

54883 0 .029 0.74 1.68 8.9 1.88 11.1 2.06 13.3 2.23 15.5 2.38 17.7

52747 1 .033 0.84 2.18 11.5 2.44 14.3 2.67 17.2 2.88 20.1 3.08 22.9

52748 2 .038 0.97 2.89 15.2 3.23 19.0 3.54 22.8 3.82 26.6 4.08 30.4

52749 3 .042 1.07 3.53 18.6 3.94 23.2 4.32 27.9 4.67 32.5 4.99 37.2

52751 4 .046 1.17 4.23 22.3 4.73 27.9 5.18 33.4 5.60 39.0 5.98 44.6

52752 5 .055 1.32 6.05 31.9 6.76 39.8 7.41 47.8 8.00 55.8 8.56 63.7

HP sURFACe CleANING Nozzles

G-10

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

ROTOMAG 2-D Pipe Cleaning NozzleThe Jetstream Rotomag is a self-powered rotating nozzle designed for cleaning stacks, sewer lines, drains, tanks, on-line boilers, and other large diameter pipes.

• Two ports at each of three nozzle angles can be used in any combination: 45° forward, 45° rearward, and radial.


• Flush mounted nozzle inserts provide low profile for cleaning small pipes while extensions are available for larger pipes, allowing the Rotomag to clean pipes ranging from 3-1/2 inches to 18 feet in diameter.


• Uses up to six flush mounted Tungsten Carbide RM series nozzles or sapphire RMs series nozzles.

• Rebuild kit allows five minute replacement of wear components right in the field using a two standard hex wrenches.

• Includes four nozzle port plugs for two jet cleaning.

PART NO. INLET CONNECTION* SPEED RANGE

DIAMETER (LESS SHROUD)

ASSEMBLY LENGTH

ASSEMBLY WEIGHT

MAX. FLOW RATE

(HAND GUN)

MAX.OPERATING PRESSURE


54530 3/4˝ MP Female 50-300 2.75 70 7.38 187 6 2.7 50 189 20,000 1,379

PART BReAKDoWN

ITeM PART No. DesCRIPTIoN

1 27072 Retaining Ring

2 52803 Shroud

3 54535 Rebuild Kit (Items 3a to 3g)

4 54452 Body

5 52310 Rotor

6 52390 Plug

6a 26759 O-Ring

7 52386 Tow Ring

7a 26869 Setscrew

TUBE CLEANING PIPE CLEANING CLEANINGVESSEL CLEANING

G-11

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com


NOZZLE EXTENSIONS• Available in three sizes and can be coupled.

• Puts nozzles closer to the inner surface of large pipes for more effective cleaning.

JETSTREAM PBABackout preventers are safety devices that mount to pipe flanges to prevent the Rotomag from backing out in the event of an unexpected and sudden shift in thrust that could result in injury to operators. Fits around hoses from 1/4˝ to 1˝ I.D. Part No. 61447

NOZZLE PLUGSUsed to close unused Rotomag nozzle ports. Part No. 52390

PART NO.DIAMETER “A” DIAMETER “B” DIAMETER “C”

in mm in mm in mm

52320-05 5.0 127 4.3 109 4.3 109

52320-10 10.0 254 7.9 201 7.8 198

52320-15 15.0 381 11.4 290 11.3 287

RePlACeMeNT PARTs

PART NO. DESCRIPTION

26759 O-Ring

26871 Vane

RePlACeMeNT PARTs


26759 O-Ring

26871 Vane

RePlACeMeNT PARTs


26759 O-Ring

A B C

RoToMAG ACCessoRIes

G-12

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

CENTRALIZERS• Several models are available for a variety

of applications.

• Required for use of extensions in horizontal pipe runs.

• Used with the the Rotomag to provide even, thorough cleaning and ease of movement.

SIX WHEEL ADJUSTABLE• Collapsible aluminum frame.

• For straight pipe runs.

• Durable plastic wheels.

• Holds short rigid lance for nozzle and hose attachment.

EIGHT WHEEL ADJUSTABLE• Zinc plated welded steel frame.

• Handles bends in pipe runs.

• Durable plastic wheels.

• Holds short rigid lance for nozzle and hose attachment.

*Stoneage Product Numbers

PART NO.*INLET & OUTLET CONNECTIONS

PIPE DIAMETER RANGE WEIGHT

in mm lbs kg

BJ286S 3/4˝ MP Male 9-18 230-460 20 9.0

BJ286M 3/4˝ MP Male 13-40 330-1000 32 14.5

BJ286L 3/4˝ MP Male 16-60 410-1500 40 18.1

PART NO.*INLET & OUTLET CONNECTIONS

PIPE DIAMETER RANGE WEIGHT

in mm lbs kg

BJ288S 3/4˝ MP Male 16-21 410-530 12 5.4

BJ288M 3/4˝ MP Male 22-29 560-740 13 5.8

BJ288L 3/4˝ MP Male 30-37 770-940 16 7.2

*Stoneage Product Numbers

RoToMAG ACCessoRIes

G-13

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

RM SERIES—CARBIDE NOZZLES

• High productivity carbide nozzles designed for use in the Rotomag.

• Precision honed carbide orifices.

• Low profile design mounts flush with the outside diameter of the Rotomag.

• Select nozzles from the charts below by choosing operating pressure, desired flow, and two, four, or six nozzle operation.

sIX RM Nozzles


10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


52689 000 .018 .46 6.2 23.3 6.7 25.4 7.2 27.3 7.7 29.0 8.1 30.7

52688 00 .025 .64 10.5 39.7 11.6 43.8 12.5 47.4 13.4 50.7 14.2 53.9

52452 0 .029 .74 13.6 51.5 15.0 56.9 16.3 61.8 17.5 66.3 18.6 70.5

52453 1 .033 .84 17.2 65.0 19.0 72.0 20.7 78.4 22.2 84.2 23.7 89.6

52454 2 .038 .92 22.3 84.4 24.7 93.7 27.0 102.1 29.0 109.8 30.9 117.0

52456 3 .042 1.01 26.9 101.8 29.9 113.2 32.6 123.4 35.1 132.9 37.4 141.6

52457 4 .046 1.17 32.0 121.0 35.6 134.6 38.8 146.9 41.8 158.2 44.6 168.8

FoUR RM Nozzles

52688 00 .025 .64 7.5 28.4 8.2 31.1 8.8 33.5 9.4 35.7 10.0 37.8

52452 0 .029 .74 9.6 36.2 10.5 39.8 11.4 43.1 12.2 46.1 12.9 48.9

52453 1 .033 .84 12.0 45.2 13.2 49.9 14.3 54.1 15.3 58.0 16.3 61.6

52454 2 .038 .92 15.4 58.1 17.0 64.3 18.5 69.9 19.8 75.1 21.1 79.9

52456 3 .042 1.01 18.4 69.8 20.4 77.3 22.2 84.2 23.9 90.5 25.4 96.3

52457 4 .046 1.17 21.8 82.6 24.2 91.6 26.4 99.8 28.4 107.4 30.2 114.4

52458 5 .055 1.40 30.5 115.6 34.0 128.6 37.1 140.3 39.9 151.1 42.6 161.1

52459 6 .063 1.59 38.4 145.4 42.8 161.8 46.7 176.7 50.3 190.5 53.7 203.2

TWo RM Nozzles

52452 0 .029 .74 5.5 21.0 6.0 22.8 6.4 24.4 6.8 25.9 7.2 27.3

52453 1 .033 .84 6.7 25.5 7.3 27.8 7.9 29.9 8.4 31.9 8.9 33.7

52454 2 .038 .92 8.4 31.9 9.2 35.0 10.0 37.8 10.7 40.4 11.3 42.8

52456 3 .042 1.01 10.0 37.7 11.0 41.5 11.9 44.9 12.7 48.1 13.5 51.0

52457 4 .046 1.17 11.7 44.1 12.9 48.7 13.9 52.8 14.9 56.5 15.9 60.0

52458 5 .055 1.40 16.0 60.6 17.7 67.1 19.3 73.0 20.7 78.4 22.0 83.4

52459 6 .063 1.59 20.0 75.5 22.1 83.8 24.1 91.2 25.9 98.1 27.6 104.4

52461 7 .067 1.70 23.0 87.2 25.6 96.9 27.9 105.6 30.0 113.6 32.0 121.0

52462 8 .070 1.78 25.0 94.7 27.8 105.2 30.3 114.7 32.6 123.4 34.8 131.6

52463 9 .073 1.85 27.1 102.5 30.1 113.9 32.8 124.3 35.3 133.8 37.7 142.6

52464 10 .078 1.98 30.7 116.2 34.2 129.3 37.3 141.1 40.1 151.9 42.8 162.0

52466 12 .081 2.06 33.0 124.9 36.7 138.9 40.1 151.7 43.2 163.4 46.0 174.3

52467 14 .089 2.26 39.5 149.6 44.0 166.6 48.1 181.9 51.8 196.1 55.3 209.2

RoToMAG Nozzles

G-14

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

RMS SERIES—SAPPHIRE NOZZLES

• High productivity sapphire nozzles designed for use in the Rotomag

• More durable than tungsten carbide for longer service life and lower operating cost

• Low profile design mounts flush with the outside diameter of the Rotomag

• Select nozzles from the charts below by choosing operating pressure, desired flow, and two, four, or six nozzle operation

sIX RMs Nozzles


10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 bar)

20,000 psi(1,379 bar)


54884 000 .018 0.46 5.4 20.4 5.8 22.1 6.3 23.7 6.6 25.1 7.0 26.5

54886 00 .025 0.64 9.0 34.1 9.9 37.4 10.7 40.4 11.4 43.2 12.1 45.8

52731 0 .029 0.74 11.6 43.9 12.8 48.4 13.9 52.5 14.9 56.2 15.8 59.7

52732 1 .033 0.84 14.6 55.1 16.1 61.0 17.5 66.3 18.8 71.1 20.0 75.6

52733 2 .038 0.97 18.8 71.3 20.9 79.0 22.7 86.0 24.4 92.4 26.0 98.4

52734 3 .042 1.07 22.7 85.8 25.2 95.3 27.4 103.8 29.5 111.7 31.4 119.0

52736 4 .046 1.17 26.9 101.8 29.9 113.1 32.6 123.4 35.1 132.8 37.4 141.6

52737 5 .052 1.32 33.9 128.5 37.8 143.0 41.2 156.1 44.4 168.1 47.4 179.4

FoUR RMs Nozzles

54886 00 .025 0.64 6.5 24.6 7.1 26.8 7.6 28.9 8.1 30.7 8.6 32.4

52731 0 .029 0.74 8.2 31.1 9.0 34.1 9.7 36.9 10.4 39.4 11.0 41.7

52732 1 .033 0.84 10.2 38.7 11.2 42.5 12.2 46.1 13.0 49.3 13.8 52.3

52733 2 .038 0.97 13.1 49.4 14.4 54.6 15.6 59.2 16.8 63.5 17.8 67.5

52734 3 .042 1.07 15.6 59.1 17.3 65.4 18.8 71.1 20.2 76.3 21.5 81.2

52736 4 .046 1.17 18.4 69.7 20.4 77.3 22.2 84.1 23.9 90.4 25.4 96.3

52737 5 .052 1.32 23.1 87.6 25.7 97.2 28.0 106.0 30.1 114.0 32.1 121.5

TWo RMs Nozzles

52732 1 .033 .84 5.9 22.2 6.4 24.1 6.8 25.9 7.3 27.5 7.7 29.0

52733 2 .038 .92 7.3 27.5 8.0 30.1 8.6 32.5 9.1 34.6 9.7 36.6

52734 3 .042 1.01 8.6 32.4 9.4 35.5 10.1 38.4 10.8 41.0 11.5 43.4

52736 4 .046 1.17 10.0 37.7 11.0 41.5 11.9 44.9 12.7 48.1 13.5 51.0

52737 5 .052 1.32 12.3 46.6 13.6 51.4 14.7 55.8 15.8 59.8 16.8 63.6

RoToMAG Nozzles

G-15

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

• Two models available

• Uses up to sixteen flush mounted RM Series Tungsten Carbide nozzles or RMS Series Sapphire nozzles

• Flush mounted nozzle inserts provide low profile for cleaning small pipes while extensions are available for larger pipes

• Heat treated stainless steel

PIPE CLEANING NOZZLES

PART NO.*INLET

CONNECTION* NOZZLE

INSERT TYPEJET CONFIGURATION

LENGTH DIAMETERMAX.OPERATING

PRESSURE

in mm in mm psi bar

52644 20K Port Female RM/RMS 1 Front, 3 Forward (45°), 5 Back (45°) 3.25 83 2.0 51 20,000 1,379

54887 3/4˝ MP Female RM/RMS 1 Front, 3 Forward (45°), 6 Radial, 6 Back (45°) 3.75 95 2.75 70 20,000 1,379


1 FRONT JET

5 BACK JETS (45°)

5 FWD JETS (45°) 6 BACK JETS (45º)

3 FWDJETS (45º)

1 FRONTJET

6 RADIALJETS (45º)

PART No. 52644 PART No. 54887

G-16

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

RMS SERIES—SAPPHIRE NOZZLES

PART NO.

ORIFICE SIZE10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 Bar)

20,000 psi(1,379 bar)


54884 000 .018 0.46 0.65 3.4 0.72 4.3 0.79 5.1 0.86 6.0 0.92 6.8

54886 00 .025 0.64 1.25 6.6 1.40 8.2 1.53 9.9 1.65 11.5 1.77 13.2

52731 0 .029 0.74 1.68 8.9 1.88 11.1 2.06 13.3 2.23 15.5 2.38 17.7

• Sapphire orifice.

• Flow rates shown are for a single RMS nozzle. Multiply by the number of nozzles to be used for total flow.

52732 1 .033 0.84 2.18 11.5 2.44 14.3 2.67 17.2 2.88 20.1 3.08 22.9

52733 2 .038 0.97 2.89 15.2 3.23 19.0 3.54 22.8 3.82 26.6 4.08 30.4

52734 3 .042 1.07 3.53 18.6 3.94 23.2 4.32 27.9 4.67 32.5 4.99 37.2

52736 4 .046 1.17 4.23 22.3 4.73 27.9 5.18 33.4 5.60 39.0 5.98 44.6

52737 5 .055 1.32 6.05 31.9 6.76 39.8 7.41 47.8 8.00 55.8 8.56 63.7

RM SERIES—CARBIDE NOZZLES

PART NO.

ORIFICE SIZE10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 Bar)

20,000 psi(1,379 bar)


52689 000 .018 0.46 0.87 4.6 0.98 5.8 1.07 6.9 1.16 8.1 1.24 9.2

52688 00 .025 0.64 1.69 8.9 1.89 11.1 2.07 13.3 2.23 15.6 2.39 17.8

52452 0 .029 0.74 2.27 12.0 2.54 14.9 2.78 17.9 3.00 20.9 3.21 23.9

• Carbide orifice.

• Flow rates shown are for a single RM nozzle. Multiply by the number of nozzles to be used for total flow.

52453 1 .033 0.84 2.94 15.5 3.29 19.4 3.60 23.2 3.89 27.1 4.16 31.0

52454 2 .038 0.97 3.90 20.5 4.36 25.7 4.78 30.8 5.16 35.9 5.51 41.1

52456 3 .042 1.07 4.76 25.1 5.32 31.4 5.83 37.6 6.30 43.9 6.74 50.2

52457 4 .046 1.17 5.71 30.1 6.39 37.6 7.00 45.1 7.56 52.6 8.08 60.2

52458 5 .055 1.32 8.17 43.0 9.13 53.8 10.00 64.5 10.80 75.3 11.55 86.0

PIPe CleANING Nozzles

G-17

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

SLEEVEPART NO.

FLOW RATE NO.

NOZZLE SIZE

51956 1 1/4˝ JS Lance

51958 1 3/8˝ JS Lance

52551 1 9/16˝ JS Lance

54256 2 9/16˝ JS Lance

Jetstream Tube Spinner Nozzles provide the most thorough cleaning of tube walls. Maximum impact and the elimination of streaking result from having two larger spinning jets rather than several smaller,non-rotating jets.

• Self-rotating sleeve has two radial jets that spin at high speed for complete coverage.

• Simple two piece design features a nozzle body, specially coated for maximum lubricity and surface hardness, and a stainless steel sleeve, hardened to extend orifice life and precision honed to prevent galling.

• A thin layer of water between the nozzle body and sleeve provides a liquid bearing on which the sleeve spins. No ball bearings to replace!

• HPF or HPE tube cleaning nozzles are connected to the tube spinner nozzle to add forward jets for unplugging tubes and/or rearward jets to pull nozzles and flex lance through tube (sold separately.)

• HPF nozzle blanks, sold below, can be installed in place of HPF or HPE nozzles when no forward or rearward jets are required.

• Tube Spinner outside diameters are the same as standard tube cleaning nozzles.

• Custom flow rates available for special applications.

TUBE SPINNERTUBE CLEANING NOZZLES


Nozzles shown as actual size. Cap nozzles sold separately

PART NO.FLOW RATE NO.

INLET CONNECTION*

(FEMALE)

OUTSIDE DIAMETER

LENGTH(WITH HPF NOZZLE)

10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 Bar)

20,000 psi(1,379 bar)

in mm in mm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm

52018 1 1/4˝ JS Lance .375 9.5 2.40 61.0 2.3 8.7 2.7 10.1 2.0 7.7 3.4 13.0 3.8 14.3

52021 1 3/8˝ JS Lance .500 12.7 2.76 70.1 3.3 12.5 3.9 14.8 4.5 17.0 5.1 19.4 5.7 21.7

52548 19/16˝ JS Lance .750 19.1 3.74 95.0

4.5 17.1 5.5 20.6 6.4 24.3 7.4 28.2 8.5 32.1

54258 2 8.8 33.4 10.3 38.9 11.7 44.3 13.1 49.8 14.6 55.2

1/4˝

JS

LANC

E

3/8˝

JS

LANC

E

9/16

˝ JS

LANC

E

G-18

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

• Designed for use with flex or rigid lances.

• HPF nozzles feature right-hand threaded female Jetstream lance connections.

• HPFL nozzles feature left-hand female medium pressure tube connections.

• Recessed orifices provide protection from surface abrasion that could distort waterjets.

• Both series have three sizes with six patterns each and fourteen flow ratings to choose.

• Custom patterns and flows available.

HPF TUBE CLEANING NOZZLES

HPF1 & HPFL1

HPF2 & HPFL2

HPF3 & HPFL3

• Designed for use with flex or rigid lances.

• HPE nozzles feature right-hand threaded female Jetstream Lance connections.

• HPEL nozzles feature left-hand female medium pressure tube connections.

• Two rows for rearward jets provide extra flushing power while special nose design allows for a greater number and optimal positioning of forward jets for unplugging.

• Both series have three sizes with six patterns each and fourteen flow ratings to choose.

• Custom patterns and flows available.

HPE TUBE CLEANING NOZZLES

HPE1 & HPEL1

HPE2 & HPEL2

HPE3 & HPEL3

HPM TUBE CLEANING NOZZLES

HPM1

HPM2

HPM3

Nozzles shown as actual size.

• Designed specifically for use with Jetstream flex lances

• Right-hand threaded male Jetstream Lance connections

• Compact design easily navigates sharp bends

• Three sizes with six patterns each and fourteen flow ratings to choose

• Custom patterns and flows available

G-19

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

HPF • HPe • HPM Nozzle FloW RATING

FLOW RATE NO.

10,000 psi(690 bar)

12,000 psi(827 bar)

14,000 psi(965 bar)

16,000 psi(1,103 bar)

18,000 psi(1,241 Bar)

20,000 psi(1,379 bar)

gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm

2 2.7 10.3 3.0 11.3 3.2 12.2 3.5 13.1 3.7 13.9 3.9 14.6

3 3.3 12.6 3.7 13.8 3.9 14.9 4.2 16.0 4.5 16.9 4.7 17.8

4 4.1 15.5 4.5 16.9 4.8 18.3 5.2 19.6 5.5 20.8 5.8 21.9

5 5.7 21.6 6.3 23.7 6.8 25.6 7.2 27.4 7.7 29.0 8.1 30.6

6 7.4 27.9 8.1 30.6 8.7 33.1 9.3 35.3 9.9 37.5 10.4 39.5

7 8.5 32.1 9.3 35.2 10.0 38.0 10.7 40.6 11.4 43.1 12.0 45.4

8 9.3 35.1 10.1 38.4 11.0 41.5 11.7 44.3 12.4 47.0 13.1 49.6

9 10.1 38.1 11.0 41.8 11.9 45.1 12.7 48.2 13.5 51.1 14.2 53.9

10 11.5 43.5 12.6 47.7 13.6 51.5 14.5 55.1 15.4 58.4 16.3 61.6

12 12.4 46.9 13.6 51.4 14.7 55.5 15.7 59.4 16.6 63.0 17.5 66.4

14 15.0 56.7 16.4 62.1 17.7 67.0 18.9 71.7 20.1 76.0 21.2 80.1

15 16.3 61.9 17.9 67.8 19.3 73.2 20.7 78.3 21.9 83.0 23.1 87.5

20 22.9 86.6 25.1 94.8 27.1 102.4 28.9 109.5 30.7 116.1 32.3 122.4

40 29.5 111.8 32.3 122.4 34.9 132.3 37.4 141.4 39.6 150.0 41.8 158.1

oRDeRING HPF • HPe • HPM Nozzles

Nozzle seRIes1 HPX

THReADsL = Left hand medium pressure threads.Omit for right hand Jetstream lance threads.

2l

sIze1 = 1/4˝ Threads2 = 3/8˝ Threads3 = 9/16˝ Threads

33

PATTeRNSpecify number corresponding to desired pattern from chart above

44

FloW RATINGSee flow rating chart. example: a flow rating number of 7 will flow 10.7 gpm (40.6 lpm) at 16,000 psi (1,103 bar).

5 7

HPX l 3 4 - 7

G-20

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300


HPF TUBE CLEANING NOOZLES

NOZZLES SHOWN AS ACTUAL SIZE

PART NO. HPF1 HPFl1 HPF2 HPFl2 HPF3 HPFl3

HPF BLANK PART NO. 51937 54242 51938 54243 51939 54244

INLET CONNECTION* 1/4˝ JS Lance

Female1/4˝ MP Tube LH

Female3/8˝ JS Lance




Female

OVERALL LENGTH .88 in | 22.4 mm .71 in | 18.0 mm 1.05 in | 26.7 mm .87 in | 22.1 mm 1.28 in | 32.5 mm 1.15in | 29.2 mm

OUTSIDE DIAMETER .375 in | 9.5 mm .50 in | 12.7 mm .75 in | 19.1 mm

PATTeRNs - NUMBeR oF JeTs BY loCATIoN

PATTERN 1 1 Front6 Back

Min Flow #3

1 Front6 Back

Min Flow #3

1 Front8 Back

Min Flow #4


Min Flow #4

1 Front8 Back

Min Flow #4

1 Front12 Back

Min Flow #5

PATTERN 3 1 Front3 Forward6 Back

Min Flow #4

1 Front3 Forward6 Back

Min Flow #4


Min Flow #5


Min Flow #5


Min Flow #5


Min Flow #6

PATTERN 5 3 Forward3 Radial6 Back

Min Flow #5

4 Forward4 Radial6 Back

Min Flow #5


Min Flow #6

PATTERN 6 1 Front3 Radial6 Back

Min Flow #4

1 Front4 Radial6 Back

Min Flow #5


Min Flow #5

FLEX OR RIGID LANCES




RIGID LANCES ONLY


G-21

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

HPE TUBE CLEANING NOZZLES


PART NO. HPe1 HPel1 HPe2 HPel2 HPe3 HPel3

HPE BLANK PART NO. 54246 54249 54247 54251 54248 54252

INLET CONNECTION* 1/4˝ JS Lance






Female

OVERALL LENGTH 1.28 in | 32.5 mm 1.06 in | 26.9 mm 1.45 in | 36.8 mm 1.28 in | 32.5 mm 1.70 in | 43.2 mm 1.62 in | 41.1 mm



PATTERN 1 1 Front2 Forward2 Radial6 Back (45˚)

Min Flow #5

1 Front3 Forward3 Radial8 Back (45˚)

Min Flow #5


Min Flow #6

PATTERN 2 1 Front3 Forward8 Back (30˚)

Min Flow #5

1 Front4 Forward12 Back (30˚)

Min Flow #6


Min Flow #8

PATTERN 3 1 Front3 Radial8 Back (30˚)

Min Flow #5

1 Front4 Radial8 Back (30˚)

Min Flow #5

1 Front6 Radial12 Back (30˚)

Min Flow #7

PATTERN 4 1 Front2 Forward3 Radial6 Back (30˚)

Min Flow #5


Min Flow #6


Min Flow #8

PATTERN 5 1 Front12 Back (30˚)

Min Flow #5

1 Front12 Back (30˚)

Min Flow #5

1 Front16 Back (30˚)

Min Flow #6

PATTERN 6 2 Front3 Forward8 Back (45˚)

Min Flow #5


Min Flow #6

3 Front4 Forward8 Back (30˚)8 Back (45˚)

Min Flow #8







RIGID LANCES ONLY

G-22

Nozzles20,000 PSI

NO

ZZ

LE

S

US & Canada: 800-231-8192 or 832-590-1300

HPM TUBE CLEANING NOZZLES


PART NO. HPM1 HPM2 HPM3

HPM BLANK PART NO. 52239 52238 54311

INLET CONNECTION* 1/4˝ JS Lance Female 3/8˝ JS Lance Female 9/16˝ JS Lance Female

OVERALL LENGTH 1.06 in | 26.9 mm 1.17 in | 29.7 mm 1.42 in | 36.1 mm




Min Flow #3

1 Front6 Back

Min Flow #3

1 Front8 Back

Min Flow #4


Min Flow #4

1 Front8 Back

Min Flow #4

1 Front12 Back

Min Flow #5


Min Flow #4


Min Flow #4


Min Flow #5


Min Flow #5


Min Flow #5


Min Flow #6

PATTERN 5 3 Forward3 Radial6 Back

Min Flow #5


Min Flow #5


Min Flow #6

PATTERN 6 1 Front3 Radial6 Back

Min Flow #4


Min Flow #5


Min Flow #5







RIGID LANCES ONLY

G-23

Nozzles20,000 PSI

NO

ZZ

LE

S

www.waterblast.com

Designed for cutting of materials by injection of an abrasive solid into a high velocity waterjet, the Abrasive Cutting Nozzle is ideal where conventional cutting methods are unsuitable.

• Nozzle can be attached directly to the end of a hand control gun or mounted to an automated cutting system.

• Durable sapphire orifice creates a high velocity waterjet which creates suction force to pull abrasive into waterjet.

• Stainless steel body, nozzle holder, and gun adapter.

• Abrasive feed tube protects nozzle body from damage.

• Tungsten carbide slurry nozzle features a funnel to aid in mixing abrasive with water and a long orifice to create an extremely cohesive and powerful cutting jet.

• Maximum Working Pressure: 20,000 psi (1,379 bar).

• Additional nozzle sizes available for other flow rates.

Abrasive Cutting Nozzle


PART NO.INLET CONNECTION*

(FEMALE)

OVERALL LENGTH

WEIGHT10,000 psi(690 bar)

12,500 psi(862 bar)

15,000 psi(1,034 bar)

17,500 psi(1,207 Bar)

20,000 psi(1,379 bar)

in mm lbs kg gpm lpm gpm lpm gpm lpm gpm lpm gpm lpm

28484 9/16˝ MP Female 6.0 153 1.5 0.7 3.4 12.8 3.8 14.3 4.1 15.6 4.5 16.9 4.8 18.1

PART BReAKDoWN

ITeM PART No. DesCRIPTIoN ITeM PART No. DesCRIPTIoN

1 28547 Slurry Nozzle 5 28562 Abrasive Feed Tube

2 54888 Body 6 29030 .040˝ Sapphire Orifice

3 29032 Setscrew 7 54889 Adapter, 9/16˝ MP Female

4 29033 O-Ring

H-1

Safety20,000 PSI

SA

FE

TY

US & Canada: 800-231-8192 or 832-590-1300

SAFETY. The one word every organization places at the top of the list when thinking about an employee. Jetstream understands the importance of conducting a safe environment when working in any high pressure waterblasting application. From personal protective equipment (PPE) to caution tape and signage, Jetstream provides a complete line of safety products to ensure a well protected jobsite and operator safety.

Products included in this section:

Visual Safety System

• Jetstream’s pioneered Visual Safety System

• Safety protection through color coding of parts

• Guns, Foot Guns, Hoses, Lances, Fittings and Decals

Safety Shrouds

• Standard Waterblasting Safety Shrouds

• TST Hose Shrouds

• TST Hose Connection Covers

• Covered Safety Whips

flex Lance Safety

• Hand-Held Lance Grip & Accessories

• Pipe and Tube Cleaning Exit Safety Devices

Personal Protective equipment (PPe)

• TurtleSkin® WaterArmor

• TST® Waterjet Protection

Safety accessories

• Safety Glasses, Goggles, Boots and Gloves

• Face Shield, Hard Hats, and Ear Protection

• Protection Suits

Safety tape, Signs and Decals

Safety Hose Checks

• Nylon

• Stainless Steel

SAFETY APPAREL & EQUIPMENT

H-2

Safety20,000 PSI

SA

FE

TY

www.waterblast.com

PROteCt yOUR WORKeRS aND tHe WateRBLaStING eQUIPMeNt WItH JetStReaM’S VISUaL Safety SySteM.

Ensuring the operator is using the correct equipment is now identifiable from a distance. Jetstream’s Visual Safety System uses highly visible and color-matched decals and additional makers to clearly show waterblast components in use are correctly and safely suited to current pump pressures.

Jetstream is now following the WJTA recommended colors to visually identify the pressure being used on a job site:

• 10,000 psi – YELLOW

• 15,000 psi – GREEN

• 20,000 psi – BLUE

• 40,000 psi – ORANGE

Hoses and Lances—Identifying a pressure of a supply hose and lance will now be easy. Supply hoses with the abrasion cover spiral will be orange. Beginning in 2015, all flex lances supplied by Jetstream for 20,000 psi will be blue from end to end.

fittings—Several adapters, couplings and connectors are now available with blue xylan coating. See the Section E. Additional fittings can be color-coded upon request.

VISUAL SAFETY SYSTEM

Visual Safety System Decals are highly visible and brightly colored to provide operators and supervisors with visual confirmation that all waterblast components, not colored, are appropriately matched to pressure ratings. Part no. 71743

H-3

Safety20,000 PSI

SA

FE

TY

US & Canada: 800-231-8192 or 832-590-1300

PART NO.LENGTH

HOSE CONNECTION*HOSE I.D. REPLACEMENT PARTS


ft m in mm SHROUD NUT WHIP HOSE** WHIP MATERIAL psi bar

J56223 6 1.8 1˝ Type M Female .50 12.7 28860 55265 28347-0064242 Rubber 20,000 1,379

55259 6 1.8 20K Port Female .39 9.9 28860 55265 28690-0064040 Plastic 20,000 1,379

56735 10 3.0 1˝ Type M Female .50 12.7 28860-10 55265 28347-0064242 Plastic 20,000 1,379

SAFETY SHROUDSDesigned for use with 20,000 psi control guns that have medium pressure inlet connections (non-DuraSafe™), these safety shroud assemblies improve operator protection in the event of a hose or end fitting failure by completely enclosing the hose and connection fittings. Assemblies include shroud, nut, and a six foot whip hose, or items can be purchased individually.

• Shroud is constructed of flexible, durable, and abrasion resistant thermoplastic around two layers of stainless steel braiding for maximum protection.

• Shroud is easily fastened or removed from rear barrel of control gun by a stainless steel nut which fits over connection fittings.

• Whip hoses are six foot lengths of waterblast hose designed to be a cost effective solution for ensuring operator safety. They are meant to be replaced at regular intervals to ensure that the hose nearest the operator’s body is always in good condition.

• Contact factory for connection types other than those listed below

IteM PaRt NO. DeSCRIPtION

1 28860 Shroud

2 28861 Nut

3 See Above Whip Hose

PaRt BReaKDOWN

*See Page I-5 for a description of each connection type.**Whip Hoses listed do not have abrasion or burst shield guards and are not intended for use near an operator without a safety shroud.

Related parts

Part No. 57126 9/16˝ MP Female x 1˝ Type M adapter(used field repairable guns)

Part No. 52181 (used of 55259 shroud)

H-4

Safety20,000 PSI

SA

FE

TY

www.waterblast.com

HOSE CONNECTION COVERPerfect use to protect connections on pumps or foot panels. The cover has an adjustable strap and the other end has two loops for flexible use.

PART NO. SIZE

59008 36mm ID x 750mm long



59011 47mm ID x 1400mm long swivel




PART NO. SIZE


TST HOSE SHROUDS

H-5

Safety20,000 PSI

SA

FE

TY

US & Canada: 800-231-8192 or 832-590-1300

PART NO.LENGTH INLET CONNECTION*

(TO FOOT GUN)OUTLET CONNECTION*

(TO FLEX LANCE)

HOSE I.D.MAX. OPERATING

PRESSURE

ft m in mm psi bar

55260 3 0.9 Jetstream 20K QD Male 9/16˝Jetstream 20K QD Male .39 9.9 20,000 1,379

STRAIN RELIEF HOSEUsed for flex lance applications, the strain relief hose prevents kinking of the flex lance to extend service life.

• Rubber hose material is more flexible and manageable than thermoplastic flex lance material.

• Connects the foot control gun and the flex lance.

*See Page I-5 for a description of each connection type.**Part No. 52041 needed to connect to foot gun.

*Included in package above.

FLEX LANCE SAFETY GRIPFor use in flex lance tube cleaning operations, the safety grip prevents a nozzle from unexpectedly exiting a tube by providing a stop through which the sleeve of the flex lance will not pass. Package includes handle, lance stop retainer for use on tubes up to 3/4˝ O.D. Choose lance stop below (not included). Part No. 54164

Lance StopsChoose lance stops below based on flex lance ID.

Safety Grip ShieldClear, plastic shield attaches to the safety grip handle to deflect water exiting the tube.Part No. J55785

Lance Stop RetainersChoose lance stop retainers based on the outside diameter of the tube to be cleaned.

Lance Stops

SAFETY GRIP ACCESSORIES

LANCE STOP PART NO.

FLEX LANCE SERIES

NUMBER

FLEX LANCE NOMINAL I.D.

in mm

51044 51952 .16 4.0

51038 51953 .20 5.0

51038 51954 .25 6.3

51779 53816 .32 8.0

PART NO. LENGTH

51055for tubes up to 3/4˝ O.D.(included with safety grip)

51425 for tubes up to 1˝ O.D.

51427 for tubes up to 2˝ O.D.

H-6

Safety20,000 PSI

SA

FE

TY

www.waterblast.com

JETSTREAM PBAThe Jetstream Pipe Blast Armor is anti-withdrawal device used for pipe cleaning applications with pipes ranging from 5˝-18˝. With the multiple mounting location points, the PBA provides complete pipe coverage with a lockable shutter to allow large debris removal. Part No. 61447

PaRt BReaKDOWN

IteM PaRt NO. DeSCRIPtION IteM PaRt NO. DeSCRIPtION

1 61283 Pipe Cover 9 26562 Nut

2 61448 Shield Door Hinge 10 27449 Nut

3 61284 Tilt Panel 11 J70804 Washer

4 61288 Adjustment Plate 12 61449 Locking Pin

5 61461 Capscrew 13 61450 Capscrew

6 27126 Capscrew 14 59229 Washer

7 25249 Washer 15 26834 Nut

8 25251 Washer

H-7

Safety20,000 PSI

SA

FE

TY

US & Canada: 800-231-8192 or 832-590-1300

A

C

B

TST® WATERJET PROTECTIONTST® products provide protection to the operator without compromising on comfort or quality. Two levels of protection are offered depending on the protection needs and working pressures. See below for specific protection levels.

ITEM(S) PART NO. DESCRIPTION

A 27885C* Safety Suit—Torso & Chaps

B 27884 Gaiters (Shins & Feet)

C 28589 Gauntlets (Hands & Forearms)

TURTLESKIN® WATERARMORProvides waterblast operators with a level of protection available from high-pressure waterjets.

• Proven protection up to 40,000 psi (2750 bar)

• Lightweight, hinged panel design provides flexibility without fatigue

• Modular design—buy only what you need

• Open back keeps operator cooler longer

PROTECTION LEVEL* COLOR IDENTIFIER SINGLE JET ROTARY JET

10/28 YELLOW 14,500 psi/1000 bar 40,600 psi/2800 bar

20/30 ORANGE 30,000 psi/2000 bar 43,500 psi/3000 bar

*Protection levels are located on all articles for quick identification.

TST® GAMMA KITTrousers and jacket with integrated hand protection.

PROteCtION LeVeL 10/28

PART NO.VENTILATED PART NO.* SIZE

58962 58962-V S/M

58901 58901-V L/XL

58902 58902-V 2XL/3XL

58973 58973-V 4XL/5XL

58975 58975-V 6XL



58963 58963-V S/M

58964 58964-V L/XL

58965 58965-V 2XL/3XL

58974 58974-V 4XL/5XL

58976 58976-V 6XL

*Ventilated products consist of tubing throughout the suit with holes every five inches for complete coverage. (A cooling tube will need to be purcahsed with this system, as well. See page H-10.)

*Duffle bag included.

H-8

Safety20,000 PSI

SA

FE

TY

www.waterblast.com


PART NO. SIZE

58944 S

58945 M

58946 L

58947 XL

58948 2XL

58949 3XL

TST® SIGMA KITWaistcoat & overall with integrated hand protection.


PART NO. SIZE

58950 S

58951 M

58952 L

58953 XL

58954 2XL

58955 3XL

TST® DELTA KITTrousers, waistcoat, and hand protection.

TST® TROUSERSIndividual item.



58956 58956-V S/M

58957 58957-V L/XL

58958 58958-V 2XL/3XL



58966 58966-V S/M

58967 58967-V L/XL

58968 58968-V 2XL/3XL



58959 58959-V S/M

58960 58960-V L/XL

58961 58961-V 2XL/3XL



58969 58969-V S/M

58970 58970-V L/XL

58971 58971-V 2XL/3XL



H-9

Safety20,000 PSI

SA

FE

TY

US & Canada: 800-231-8192 or 832-590-1300

TST® JACKETIntegrated hand protection. Individual item.

TST® WAISTCOATIndividual item.

TST® HAND PROTECTIONSold separately.

TST® OVERALLIntegrated hand protection. Individual item.


PART NO. SIZE

58972 S/M

58973 L/XL

58974 2XL/3XL


PART NO. SIZE

58978 M-2XL

58979 3XL


PART NO. SIZE

58904 LEFT

58905 RIGHT


PART NO. VENTILATED SIZE

58982 58982-V S

58983 58983-V M

58984 58984-V L

58985 58985-V XL

58986 58986-V 2XL

58987 58987-V 3XL


PART NO. SIZE

58975 S/M

58976 L/XL

58977 2XL/3XL

59492 4XL/5XL


PART NO. SIZE

58980 M-2XL

58981 3XL


PART NO. SIZE

58998 LEFT

58999 RIGHT


PART NO. VENTILATED SIZE

58988 58988-V S

58989 58989-V M

58990 58990-V L

58991 58991-V XL

58992 58992-V 2XL

58993 58993-V 3XL

H-10

Safety20,000 PSI

SA

FE

TY

www.waterblast.com

TST® APRONOne size fits all. Individual Item.

TST® WAISTCOAT W/APRONOne size fits all. Individual Item.

PART NO.PROTECTION

LEVEL

58903 10/28

58997 20/30

PART NO.PROTECTION

LEVEL

58995 10/28

58996 20/30

PART NO.PROTECTION

LEVEL

59007 20/30

PART NO.PROTECTION

LEVEL

59006 N/A PART NO.PROTECTION

LEVEL

60396 5/5/2

PART NO.SIZE APPROX.

US MEN

59000 8.5

59001 9

59002 10

58932 11

59003 12

59004 13

59005 14

TST® GAITERSOne size fits all. Pair.

TST® BALACLAVAOffers no waterjet protection.

TST® PRO-OPERATORGLOVESIncludes inner gloves. Pair.

TST® BOOTS 3000

PART NO. L

59015 0.5

59016 2.5

TST® GREASE REMOVER

PART NO. CMF

61415 25 CFM

51416 35 CFM

VORTEX COOLER TUBEPersonal Air Conditioner. For

full body cooling, a 25cfm or

35cfm tube is recommended.

If the tube is not sized for

the available air supply, it will

perform poorly. Not shown.

H-11

Safety20,000 PSI

SA

FE

TY

US & Canada: 800-231-8192 or 832-590-1300

Part No. J70316Safety GlassesPREMIUMClear/Gray anti-fog lens, adjustable nose pad, scratch resistant, UV-blocking, Z87+ approved.

Part No. 25620Safety GogglesSoft frame with impact and chemical splash protection, anti-fog lens, Neoprene strap, Z87+ approved.

SAFETY ACCESSORIES

Part No. 25621Universal face Shield BracketFits the brim of most hard hats. Aluminum.

Part No. 26255face Shield ClearMultiple mounting slots.Polycarbonate.

Part No. 26255tface Shield tintedMultiple mounting slots.Polycarbonate.

Part No. 25625Hard HatWhite, six-point nylon suspension w/pin-lock adjustment.Hard Plastic.

Part No. J70321ear PlugsUncorded w/noise reduction rating: 33Molded Polyurethane Foam.

Part No. J70322ear PlugsCorded w/noise reduction rating: 30Molded Polyurethane Foam.

Part No. J70315Hard HatWhite, six-point nylon suspension w/ ratchet knob.Hard Plastic.

Part No. 26255Vface Shield Clear with VelcroMultiple mounting slots with velcro strip. Polycarbonate.

Part No. J70324-sizePremium 16˝ BootsSteel toe, waterproof, meets ANSI Z41 PT99 Sect 1, 2, & 5. SIZE 6 to 14. Black/Yellow Rubber.

Part No. 27168-sizeeconomy 16˝ BootsSteel toe and waterproof. SIZE 7 to 13.Black Rubber.

Part No. J70326-size12˝ BootsSteel toe, waterproof, meets ANSI Z41 PT99 Sect 1. SIZE 6 to 14.Copper/Tan Neoprene.

Part No. 26894Shin & foot GuardsPadded instep and nylon straps.Aluminum.

Part No. J70318Safety GlassesECONOMYScratch resistant, UV-blocking.

Part No. J70317Safety GlassesPREMIUMGray/Gray anti-fog lens, adjustable nose pad, scratch resistant, UV-blocking, Z87+ approved.

Part No. 25624Gloves14˝ PVC/NITRILE. Chemical resistant with rough finish. Fully coated w/jersey lining. SIZE 10.

Part No. J70327Gloves12˝ PVCRough finished gloves. Cotton Lining. SIZE 10.

Part No. J70323-sizeWater Protection SuitsJacket, bib overall pants & face shield bib. PVC/Polyester.SIZES M-5XL

Part No. 25617-sizeWater Protection Suits Jacket and bib overall pants.PVC/Polyester.SIZE M-7XL

H-12

Safety20,000 PSI

SA

FE

TY

www.waterblast.com

Part No. 26247Health Hazard Caution Sign14˝ x 10˝

Part No. 26253Restricted Caution Sign14˝ x 10˝

Part No. 25614Waterblasting Danger Sign14˝ x 10˝

Part No. 71147Safety Warning Decal Set (Unit and Fluid End)

Part No. 71147-feSafety Warning Decal Set (Fluid End Only)

Part No. 29263Safety Warning Medical Card

Part No. 7174320K Color Coded Pressure Decal

Part No. 26717Jetstream Unit Decal - White

Part No. 29956Jetstream Unit Decal - Blue

SAFETY TAPE, SIGNS AND DECALS

Part No. 57998Safety tape “Caution: Waterblasting in Progress” Dimensions:3˝x 300ft 75mm x 90 m

Part No. 28501Safety Warning Sticker

Part No. J70413Safety tape“Danger: Hydroblasting”Dimensions:3˝ x 1000ft75mm x 300 m

SAFETY HOSE CHECKS

Part No. 27863Nylon Hose CheckOne Size Fits All

Part No. 52242Steel Hose CheckFor hoses smaller than 1˝ I.D.

Part No. 53412Steel Hose CheckFor 1˝ I.D. or larger

I-1

Technical20,000 PSI

TE

CH

NIC

AL

US & Canada: 800-231-8192 or 832-590-1300

UNIT CONVERSIONS & FORMULAS

*Formulas assume 90% mechanical efficiency

MeaSUReMenT cOnVeRSiOn eXaMPle

LENGTH

1 in. = 25.4 mm 12 in. x 25.4 = 304.8 mm

1 in. = .0254 m 120 in. x .0254 = 3.05 m

1 ft. = .3048 m 12 ft. x .3048 = 3.68 m

1 mm = .0394 in. 100 mm x .0394 = 3.94 in.

1 m = 39.37 in. 10 m x 39.37 = 393.7 in.

1 m = 3.281 ft. 10 m x 3.281 = 32.81 ft.

VOLUME1 gal = 3.785 l 10 gal x 3.785 = 37.85 l

1 liter = .2642 gal 100 liters x 26.42 = 26.42 gal

WEIGHT1 lb. = .454 kg 10 lbs. x .454 = 4.54 kg

1 kg = 2.205 lbs. 10 kg x 2.205 = 22.05 lbs.

PRESSURE1 psi = .06895 bar 40,000 psi x .06895 = 2,758 bar

1 bar = 14.503 psi 2,758 bar x 14.503 = 40,000 psi

FLOW1 gpm = 3.785 lpm 30 gpm x 3.785 = 113.55 lpm

1 lpm = .2642 gpm 100 lpm x .264 = 26.42 gpm

FORCE1 lb. = 4.448 N 100 lbs. x 4.448 = 444.8 N

1 N = .2248 lbs. 900 N x .2248 = 202.32 lbs.

TORQUE1 lb.-ft. = 1.3567 N-m 100 lb.-ft. x 1.3567 = 135.67 N-m

1 N-m = .737 lb.-ft. 100 N-m x .737 = 73.7 lb.-ft.

POWER1 hp = .7457 kW 50 hp x .7457 = 37.29 kW

1 kW = 1.341 hp 50 kW x 1.341 = 67.05 hp

FORMUla enGliSh UniTS MeTRic UniTS

Power Requirements* hp = gpm x psi / 1550 kW = lpm x bar / 540

I-2

Technical20,000 PSI

TE

CH

NIC

AL

www.waterblast.com

CONNECTION TYPES

JETSTREAM 20K PORT• Specially designed to prevent leakage and wear

frequently associated with standard connections by incorporating a replaceable seal assembly that is hydraulic biased to increase sealing force as pressure increases.

• Repairing leaks requires only replacement of the seal, compared with standard connections which often require re-coning, or component replacement

• Utilized in most Jetstream 20,000 psi products

Several connection types are available for use with Jetstream 20,000 PSI products. The purpose of this section is to allow users to identify the connections needed and provide information on the features and proper use of each.

ACTUAL SIZE REFERENCE CHART

JETSTREAM 20K PORT MALE

CONNECTION THREAD

RECOMMENDED TORQUE

ft-lbs N-m

1˝ - 16UN 50 68

nOTe: Always apply thread lubricant (anti-seize) to male threads before assembling Jetstream 20K Port connections. See Fittings, page E-1, for thread lubricants available from Jetstream.

I-3

Technical20,000 PSI

TE

CH

NIC

AL

US & Canada: 800-231-8192 or 832-590-1300

• Enables fast connection and removal of 20,000 psi tools

• Utilizes the same hydraulically-biased replaceable seal as the Jetstream 20K Port Connection

• Hand-tightening is all that is required. A locking ring in the female swivel fitting holds the male fitting in place

• Repairing leaks requires only replacement of the seal, compared with standard connections which often require re-coning or component replacement

• Available on Jetstream 20,000 psi rubber hoses

• Connectors are available to use the Quick Disconnect fitting with any 20,000 psi product

JETSTREAM 20K QUICK DISCONNECT ACTUAL SIZE REFERENCE CHART

JETSTREAM 20K QD FEMALE

JETSTREAM 20K QD MALE

JETSTREAM HHP MALE ADAPTERSFor use with 6020 and 5020Q pumps, the Jetstream HHP connection features an easily replaceable seal to prevent wear or damage to the manifold and a large bore to minimize pressure drop through fittings.

• Copper plated for galling resistance

• Stainless steel


I-4

Technical20,000 PSI

TE

CH

NIC

AL

www.waterblast.com

• Industry standard connection for 20,000 psi applications.

• Connections exist in two different forms:

1. Used to connect medium pressure tubing with a conical male seat and left-handed threads to a female port using a gland nut and left-hand threaded collar (Gland, Collar & Tubing).

2. For many medium pressure male fittings, the geometry of the gland, collar, and tubing is combined into one component that connects directly to a medium pressure female port (Single-Piece Style).

• With proper care, this connection is suitable for repetitive connection/disconnection.

• Damage from repeated or improper use can often be repaired using reconing tools. For details on tubing preparation and repair equipment, contact Jetstream Sales.

cOnnecTiOn inSTRUcTiOnS1. 3 pc. Male connection Style Only—Liberally apply anti-seize

to male tubing threads to prevent thread galling.

2. 3 pc. Male connection Style Only—Slide gland nut over tubing and thread collar (left-hand threaded) onto tubing until it is past the first one or two full threads of the tubing.

3. Both Styles—Liberally apply anti-seize to male connection threads and male cone.

4. Both Styles—Install male connection into female port and tighten according to torque specification in chart above.

MEDIUM PRESSURE (MP)

*For three-piece connection styles only

SIZEGLAND CONNECTION

THREADTUBING THREAD*

LEFT-HAND

RECOMMENDED TORQUE

ft-lbs N-m

1/4˝ MP 7/16˝ - 20UNF 1/4˝ - 28UNF 20 27

3/8˝ MP 9/16˝ - 18UNF 3/8˝ - 24UNF 30 41

9/16˝ MP 13/16˝ - 16UNF 9/16˝ - 18UNF 85 15

3/4˝ MP 3/4˝ - 14NPSM 3/4˝ - 16UNF 90 122

1˝ MP 1-3/8˝ - 12UNF 1˝ - 14UNF 125 170


I-5

Technical20,000 PSI

TE

CH

NIC

AL

US & Canada: 800-231-8192 or 832-590-1300

SIZETUBE CONNECTION

THREAD

RECOMMENDED TORQUE

ft-lbs N-m

1/4˝ MP Tube LH 1/4˝-28UNF-LH15 20

1/4˝ MP Tube RH 1/4˝-28UNF-RH

3/8˝ MP Tube LH 3/8˝-24UNF-LH25 34


9/16˝ MP Tube LH 9/16˝-18UNF-LH30 41


3/4˝ MP Tube LH 3/4˝-16UNF-LH45 61


1˝ MP Tube LH 1˝-14UNF-LH 70 95

JETSTREAM LANCE• Formerly known as Jetstream’s “Rigid Lance” connection.

• Commonly found in Jetstream flex and rigid lances and tube nozzles.

• Male Jetstream Lance connections will fit into female right hand medium pressure tube connections, but female Jetstream Lance connections cannot be used with male medium pressure tube connections.

MEDIUM PRESSURE TUBE (MP TUBE)• Industry standard connection for 20,000 psi applications.

• Left-hand threaded connections are used in standard medium pressure three-piece connection style.

• Both left- and right-hand threaded connections are used in tube cleaning applications in which the male connection is inserted directly into a female connection without use of a gland and collar. For use where standard connections are too large in diameter.



SIZELANCE CONNECTION

THREAD

RECOMMENDED TORQUE

ft-lbs N-m

1/4˝ JS Lance 1/4˝-28UNF 15 20

3/8˝ JS Lance 3/8˝-24UNF 25 34

9/16˝ JS Lance 9/16˝-18UNF 30 41

I-6

Technical20,000 PSI

TE

CH

NIC

AL

www.waterblast.com

TYPE M• Industry standard connection.

• Designed for fast, simple connection of waterblast hoses and lances to waterblast equipment.

• Male conical seat protected from damage by the hose swivel nut.

• Unlike medium pressure connections, the seating surfaces do not rotate against each other when connections are made, resulting in a more reliable, longer lasting connection.

• Verify pressure rating of Type M hoses and fittings before use as the connection type is used for a wide range of pressures due to its ease of use and reliability.

SIZEGLAND CONNECTION

THREAD

RECOMMENDED TORQUE

ft-lbs N-m

9/16˝ Type M M9 9/16˝ - 18UNF 30 41

3/4˝ Type M M12 3/4˝ - 16UNF 1˝ 45 61

7/8˝ Type M M14 7/8˝ - 14UNF 50 67

1˝ Type M M16 1˝ - 12UNF 75 95

1 5/16˝ Type M M21 1-5/16˝ - 12UN 110 149


7/8˝ Type M not shown.

I-7

Technical20,000 PSI

TE

CH

NIC

AL

US & Canada: 800-231-8192 or 832-590-1300

HOSES & FLEX LANCESPRESSURE DROP DATA

The charts shown are used to approximate how much pressure will be lost through a particular hose or lance at a given flow rate. Because of frictional forces, the water exiting a hose or lance could be at a significantly lower pressure than at entry. In some cases, especially when using smaller hoses and lances such as Series 51952 & 51953, the flow rate that can be used is determined by pressure drop through a lance rather than the pump’s maximum output.

PRESSURE DROP & NOZZLE SIZINGPressure drop is especially important to understand when sizing nozzles. Use the following procedure for correct nozzle sizing:

1. Determine the pressure needed for a particular cleaning operation and subtract that amount from the desired pump operating pressure. The result is the desired pressure drop.

2. Consult pressure drop chart for the hose to be used to determine what flow rate will result in the intended pressure drop.

3a. If this flow rate exceeds the maximum flow of the pump, use the chart to find the pressure drop at the maximum pump flow and subtract that amount from the desired pump operating pressure to get the pressure at the nozzle. Then use the flow charts provided for the desired nozzle to select a nozzle, or nozzles, matching the desired flow and pressure.

3b. If this flow rate is within the capability of the pump, use the flow charts provided for the desired nozzle to select a nozzle, or nozzles, matching the desired flow and pressure.

nOTe: Doubling the length of a hose or lance will result in approximately twice the pressure drop at the same flow rate.

SERIES 52534 RUBBER WATERBLAST HOSESee page D-1 for ordering information.

I-8

Technical20,000 PSI

TE

CH

NIC

AL

www.waterblast.com

SERIES 29120 THERMOPLASTIC HOSESee pages D2, D4, D5 for ordering information.

SERIES 28347 THERMOPLASTIC HOSESee pages D2, D4, D5 for ordering information.


SERIES 53816 THERMOPLASTIC HOSE & LANCE See pages D2–D5 for ordering information.


I-9

Technical20,000 PSI

TE

CH

NIC

AL

US & Canada: 800-231-8192 or 832-590-1300

RIGID LANCE PRESSURE DROP DATA



I-10

Technical20,000 PSI

TE

CH

NIC

AL

www.waterblast.com

3/4˝ RIGID LANCES .740˝ O.D. X .437˝ I.D.



Pres

sure

Dro

p (p

si)

Pres

sure

Dro

p (p

si)

Pres

sure

Dro

p (p

si)

Flow Rate (gpm)

Flow Rate (gpm)

Flow Rate (gpm)

Flow Rate (gpm)


HOSES & LANCES20,000 PSI

Related ItemsSTINGERS — See Fittings, Section F

SLIM LINE COUPLERS — See Fittings, Section FFITTINGS, CONNECTORS, COUPLINGS — See Fittings, Section FFLEXIBLE HOSES — See Hose, Section C NOZZLES — See Nozzles, Section D

Jetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com

Copyright Jetstream of Houston, LLP ©2004D-9

RIGID LANCE PRESSURE DROPSee Page D-6 for information regarding pressure drop.

3/4" RIGID LANCES.740" O.D. x .437" I.D.

9/16" RIGID LANCES .553" O.D. x .312" I.D.


































I-11

Technical20,000 PSI

TE

CH

NIC

AL

US & Canada: 800-231-8192 or 832-590-1300

THREADING AND CONING TOOLSHP CONNECTIONS

• Coning tool assemblies include tool as well as cutter and collet specific to the connection size and type needed.

• Threading tool assemblies include tool (consisting of housing and handle) as well as die and guide bushing specific to connection size needed.

nOTe:

• ¼˝ & 3/8˝ coning tools use the same tool with differing cutters & collets.

• 9/16˝ coning tools use the same tool with differing cutters.

• All threading tool assemblies include LH die and all use the same handle and housing.

CONING TOOL

THREADING TOOL

cOninG

CONNECTION TYPE CONING TOOL AY CONING CUTTER CONING COLLET

1/4˝ HP 71079 71085 71088

3/8˝ HP 71080 71086 71089

9/16˝ HP 71081 71087 71090

ThReaD

CONNECTION TYPE THREATH TOOL AY LH DIE RH DIE BUSHING

1/4˝ HP 71091 70192 71095 71097

3/8˝ HP 28783 71093 71096 71098

9/16˝ HP 28872 71094 28873 71099

J-1

Index20,000 PSI

IND

EX

www.waterblast.com

PART nO. PAGe PART nO. PAGe PART nO. PAGe

00635 .....................C-1702173 ......................E-103020 .......................C-33020B .....................C-33020N .....................C-33020Q .....................C-33020W ....................C-33120T ......................C-33520Q .....................C-33620 .......................C-33720B .....................C-33720W ....................C-33720WZ ..................C-34020B .....................C-304101 ......................B-4, B-74220 .......................C-34220N .....................C-34220QN ..................C-34520B .....................C-35020Q .....................C-307189 ......................B-1521929 ......................C-1025037 .....................C-12, C-1425117 ......................C-2125125 ......................C-1025165 ......................B-17, B-29, C-1025193 ......................F-3, F-625206 .....................C-4, C-6, C-725212 ......................C-1025221 ......................C-2225247 ......................C-1425249 ......................C-14, H-625251 ......................C-14, H-625261 ......................F-7, F-825279 ......................C-1925295 .....................F-3, F-625314 ......................C-1425421......................B-2925566 .....................B-2725593 .....................C-9, C-11, C-1225603 .....................C-9, C-11, C-1225607 .....................B-21, B-23, B-25, C-325614 ......................H-1225617 ......................H-1125620 .....................H-1125621......................H-1125624......................H-1125625 .....................H-1125644 .....................C-725645 .....................C-725690 .....................E-1025700 .....................C-11, C-1225740 ......................C-1025796 .....................C-425802 .....................C-725820 .....................C-725866 .....................C-2125908 .....................B-17, B-2925928 .....................B-4, B-725946 .....................B-4, B-7, B-15, B-17, B-21, ................................B-23, B-25, B-27, B-2926051 .....................B-4, B-726075......................C-726116 ......................C-7, F-3, F-5, F-626145 ......................B-17, B-2926195 ......................B-4, B-726208 .....................B-4, B-726212 ......................B-2126220 .....................B-2326247 ......................H-1226253 .....................H-12

26255 .....................H-1126255T ...................H-1126255V ...................H-1126259 .....................B-4, B-726259-1 ..................B-4, B-726259-2 ..................B-4, B-726259-3 ..................B-4, B-726360 .....................B-4, B-726361 .....................B-4, B-726369 .....................B-4, B-726376......................B-4, B-726379 .....................B-4, B-726390 .....................B-4, B-726416 ......................B-13, B-15, B-21, B-23, B-25, ................................B-27, C-1026426 .....................C-1926435 .....................B-4, B-726453 .....................F-7, F-826455 .....................C-1626462 .....................C-326465 .....................B-23, B-25, B-27, B-2926468 .....................B-4, B-7, B-13, B-17, B-21, ................................B-23, B-25, B-27, B-2926469 .....................B-15, B-21, B-23, B-25, B-2726479 ......................B-4, B-726481 .....................B-4, B-726482 .....................B-4, B-726484 .....................B-4, B-726487 .....................B-4, B-7, B-17, B-21, B-23, ................................B-25, B-2726491 .....................B-4, B-726500 .....................B-4, B-7, B-13, B-17, ................................B-25, C-326501 .....................B-17, B-2926523 .....................B-1326544 .....................B-29, C-326546 .....................B-13, B-15, B-21, B-23, ................................B-25, B-2726549 .....................B-13, B-15, B-21, B-23, ................................B-25, B-2726550 .....................B-13, B-15, B-21, B-23, ................................B-25, B-2726558 .....................B-4, B-726562 .....................H-626565 .....................C-1426589 .....................B-1526590 .....................B-4, B-726635 .....................C-12, C-15, E-13, F-3, ................................F-5, F-626645 .....................C-12, C-15, E-13, F-3, ................................F-5, F-626669 .....................B-2526689 .....................C-7, C-8, F-3, F-5, F-626705 .....................B-4, B-726706 .....................C-726707 ......................C-1426709 .....................C-726711 ......................C-726717 ......................H-1226758N ...................G-3, G-626758S ...................G-3, G-626759 ......................G-1026762......................G-2, G-626765......................C-2126766 .....................C-2126776 ......................C-11, C-1626782......................C-1126798 .....................B-4, B-7, C-1426802 .....................B-15, B-21, B-23, B-2526834 .....................H-626869 .....................G-10

26874 ......................B-21, B-23, B-25, B-27, B-2926876......................B-1326894 .....................H-1126916 ......................C-2126993 .....................C-327009 .....................E-1227072 ......................G-1027101 ......................B-4, B-7, B-15, B-17, B-21, ................................B-23, B-25, B-27, B-2927107 ......................C-4, C-627122 ......................C-1427126 ......................H-627168 ......................H-1127251 ......................C-4, C-627252 ......................C-727347 ......................C-727349 .....................C-727350 .....................C-9, C-1227449 ......................H-627475 ......................B-23, B-25, B-2727494 ......................C-1927497 ......................C-2127502......................E-2, E-3, E-6, E-7, E-827527 ......................E-927539 .....................B-1527550......................B-27, C-327551 ......................B-2727592......................B-4, B-727671 ......................B-1327680 .....................C-1027688 .....................C-2127698 .....................C-2227714 ......................C-5, C-827716 ......................C-1927721 ......................E-127729......................B-2727732......................B-13, B-1727740 ......................B-13, B-15, B-2927749 ......................B-1727863 .....................H-1227884 .....................H-727885C ...................H-727964 .....................E-1127966 .....................E-1127968-03 ................C-1427968-04 ................C-1427968-06 ................F-627968-11 ................C-1427968-48 ................F-3, F-5, F-627969 .....................C-14, E-1127971 ......................C-14, E-1427973 ......................C-14, E-1327997......................E-1128003 .....................E-1428025 .....................C-1428062 .....................B-4, B-728092 .....................E-1428101 ......................E-928180 ......................E-1328181 ......................E-1328184 ......................C-14, E-1128185 ......................E-1228186 ......................E-1328187 ......................E-1228188 ......................E-1228189 ......................E-1228190 ......................E-1028191 ......................E-1028192 ......................E-928193 ......................E-928196 ......................E-9

PART NUMBERS

J-2

Index20,000 PSI

IND

EX

US & Canada: 800-231-8192 or 832-590-1300

28197 ......................E-128229 .....................E-1328261......................E-1428268 .....................E-13, F-3, F-5, F-628299 .....................E-928301 .....................E-1128314 ......................E-1728315 ......................E-1728328 .....................E-928330 .....................E-928341 ......................E-1228347......................D-2, D-4, D-528349 .....................E-1728350 .....................E-928364 .....................C-528382 .....................E-1228383 .....................C-5, E-1328384 .....................C-5, E-1328399 .....................C-528433 .....................E-928435 .....................G-228462 .....................B-29, E-1328480MOD .............C-2128484 .....................G-2328501 .....................H-1228519 ......................C-2128547......................G-2328562 .....................G-2328589 .....................H-728610 ......................E-1428616 ......................B-2928629 .....................E-928631 .....................E-928632 .....................A-328634 .....................B-1128666 .....................E-1728667 .....................E-1728668 .....................E-1728690 .....................D-4, D-528699 .....................D-4, D-528700 .....................E-1728726 ......................E-1328731 ......................E-1328732......................E-1328783...................... I-1128786......................E-928797 ......................E-1328804 .....................E-928806 .....................C-2128826 .....................B-428854 .....................E-928860 .....................H-328861 .....................H-328872...................... I-1129013 ......................E-1529019......................E-929030 .....................G-2329032 .....................G-2329033 .....................G-2329058 .....................E-929059 .....................E-929060 .....................E-929061 .....................E-929062 .....................E-929063 .....................E-929064 .....................E-929065 .....................E-929066 .....................E-929067 .....................E-1129068 .....................E-1129069 .....................E-1129070 .....................E-1129071 .....................E-1129072 .....................E-11

29073 .....................E-1129074 ......................E-1129075 .....................E-1129076 .....................E-1229077 .....................E-1229078 .....................E-1229079 .....................E-1229080 .....................E-1229081 .....................E-1229082 .....................E-1229083 .....................E-1229084 .....................E-1229085 .....................E-1029086 .....................E-1029087 .....................E-1029088 .....................E-1029089 .....................E-1029090 .....................E-1029091 .....................E-1029092 .....................E-1029093 .....................E-1029094 .....................E-1029095 .....................E-1329096 .....................E-1329097 .....................E-1329098 .....................E-1329099 .....................E-1329100......................E-1329101 ......................E-1329102 ......................E-1329103 ......................E-1329104 ......................E-1329105 ......................E-1329106......................E-1329111 ......................E-1729112 ......................E-1729113 ......................E-1729114 ......................E-1729115 ......................E-1729116 ......................E-1629117 ......................E-1629118 ......................E-1629119 ......................E-1229120 ......................D-2, D-4, D-529253 .....................E-1429263 .....................H-1229374 ......................C-2229669 .....................E-1429722......................C-5, C-8, C-1029738 .....................B-4, B-729799 .....................C-729904 .....................C-1429956 .....................H-1250064 .....................B-17, C-350124 ......................F-3, F-550127 ......................F-3, F-550131 ......................C-1850133 ......................C-1850134 ......................C-1850148 ......................C-1850293 .....................B-2550295 .....................B-4, B-7, B-13, B-21, B-23, ................................B-25, B-2750301 .....................B-15, B-21, B-23, B-25, B-2750306 .....................B-15, B-23, B-25, B-2750465 .....................B-13, B-15, B-21, B-23, ................................B-25, B-2750511 ......................F-650795 .....................C-9, C-11, C-1250811 ......................C-1150889 .....................B-13, B-15, B-21, B-23, ................................B-25, B-27, C-350900 .....................C-1150989 .....................C-14

51024 ......................H-551038 ......................H-551044 ......................H-551279 ......................B-4, B-751416 ......................H-1051421 ......................B-4, B-751425 ......................H-551427 ......................H-551431 ......................B-1751487 ......................B-4, B-751534 ......................B-4, B-751536 ......................B-4, B-751538 ......................B-4, B-751558 ......................B-1751638 ......................C-5, C-851659 ......................B-4, B-7, B-13, B-15, B-17, ................................B-21, B-23, B-25, B-27, B-2951666 ......................B-17, B-2951695 ......................B-2951713 ......................B-4, B-751714 ......................B-2151719 ......................B-2151731 ......................B-4, B-751736 ......................B-4, B-7, B-17, B-21, B-23, ................................B-25, B-2751757 ......................B-1751758 ......................B-17, B-2951759 ......................B-1751761 ......................B-1751766 ......................B-25, B-2751772 ......................C-1751773 ......................C-1751774 ......................C-1751779 ......................H-551780 ......................B-17, B-2951786 ......................B-1751787 ......................B-2951790 ......................B-13, B-15, B-21, B-23, ................................B-25, B-2751812 ......................B-1551813 ......................B-1551814 ......................B-13, B-15, B-21, B-23, ................................B-25, B-2751818 ......................B-15, B-2551826 ......................B-15, B-21, B-23, B-25, B-2751828 ......................B-15, B-21, B-23, B-25, B-2751829 ......................B-15, B-21, B-23, B-25, B-2751832 ......................B-15, B-21, B-23, B-25, B-2751836 ......................C-1751837 ......................C-1751838 ......................C-1751849 ......................B-1751857 ......................B-15, B-21, B-23, B-25, B-2751864 ......................C-4, F-751869 ......................C-4, F-3, F-6, F-751874 ......................F-3, F-5, F-651890 ......................C-1751903 ......................C-2051903A ...................C-2051912 ......................E-751916 ......................E-851917 ......................E-251918 ......................C-1251929 ......................C-1251933 ......................D-751934 ......................D-751936 ......................D-751937 ......................G-2051938 ......................G-2051939 ......................G-2051952 ......................D-4, D-5, D-6, H-551953 ......................D-4, D-5, D-6, H-551954 ......................D-2, D-4, D-5, D-6, H-551955 ......................B-21, B-23, B-25


J-3

Index20,000 PSI

IND

EX

www.waterblast.com

51956 ......................G-1751958 ......................G-1751968 ......................B-17, B-2951970 ......................B-17, B-2951974 ......................B-2151975 ......................B-1551978 ......................G-851979 ......................G-851980 ......................G-851981 ......................G-851982 ......................G-851984 ......................G-851985 ......................G-851986 ......................G-851987 ......................G-851991 ......................B-2151995 ......................B-1452000 .....................B-1452018 ......................G-1752021......................G-1752030 .....................C-1852031......................E-752032 .....................E-852035 .....................B-13, B-15, B-17, B-21, B-23, ................................B-25, B-27, B-29, C-1752038 .....................E-652039 .....................E-652040 .....................C-11, C-12, C-16, C-17, C-1852041 ......................E-252042 .....................C-1852043 .....................C-1752044 .....................C-12, E-252073 ......................E-452075 ......................B-1652076 ......................C-9, C-11, E-352076-1 ..................B-1552080 .....................B-1652088 .....................E-1652090 .....................B-2052110 ......................B-852114 ......................B-1352115 ......................B-852120 ......................B-252125 ......................B-252144 ......................C-9, C-1252157 ......................G-2, G-652160 ......................B-2452172 ......................G-252179 ......................E-752181 ......................E-752182 ......................E-752187 ......................E-652188 ......................E-652189 ......................E-652190 ......................C-1152191 ......................E-852193 ......................E-652196 ......................B-2352197 ......................B-2352201......................C-1152202 .....................C-1152206 .....................C-1152209 .....................C-12, E-252210 ......................G-652211 ......................G-752212 ......................G-752213 ......................G-752214 ......................G-752215 ......................G-752216 ......................G-752221......................C-1152238 .....................G-2252239 .....................G-2252242 ......................H-12

52250 .....................C-7, C-1652251 ......................C-1652252 .....................C-1652255 .....................C-9, C-11, C-1252305 .....................G-2, G-652310 ......................G-1052320-05 ................G-6, G-1152320-10 ................G-1152320-15 ................G-1152348 .....................C-1152354 .....................E-352373 ......................E-1752374 ......................E-1752386 .....................G-1052390 .....................G-10, G-1152437 ......................E-1652438 .....................E-652452......................G-13, G-1652453 .....................G-13, G-1652454 .....................G-13, G-1652456 .....................G-13, G-1652457 ......................G-13, G-1652458 .....................G-13, G-1652459......................G-1352461 ......................G-1352462......................G-1352463 .....................G-1352464 .....................G-1352466 .....................G-1352467 ......................G-1352487 ......................B-2352494......................B-1352497 ......................B-15, C-2252498 .....................C-2252501......................B-15, B-21, B-25, B-2752502 .....................B-15, B-23, B-25, B-2752504 .....................B-15, B-21, B-25, B-2752506 .....................B-1452507......................B-252509 .....................B-15, B-21, B-25, B-2752521 ......................E-1652543 .....................C-6, F-5, F-852545 .....................B-2252548 .....................G-1752551 ......................G-1752552 .....................E-1652585 .....................B-552624......................C-1652640 .....................C-652644 .....................G-1552646 .....................E-852647......................E-852648 .....................E-852667 .....................E-752668 .....................E-652685 .....................C-952686 .....................G-752688 .....................G-13, G-1652689 .....................G-13, G-1652731 ......................G-14, G-1652732......................G-14, G-1652733......................G-14, G-1652734 .....................G-14, G-1652736 .....................G-14, G-1652737 ......................G-14, G-1652738......................G-752739......................G-752741 ......................G-752742 ......................G-752743 ......................G-752744 ......................G-752746 ......................G-752747 ......................G-952748 ......................G-9

52749 ......................G-952750 ......................C-5, C-852751 ......................G-952752 ......................G-952766......................E-1752767 ......................E-1752803 .....................G-1053037 .....................E-453038 .....................E-353149 ......................E-1653175 ......................F-3, F-653203 .....................C-753219 ......................E-753221 .....................E-1653230 .....................F-253242......................B-17, B-21, B-23, B-25, B-2953282 .....................E-1753283 .....................E-1753284 .....................B-15, E-353296 .....................B-2153305 .....................F-253320 .....................F-753369 .....................C-4, F-753373 .....................F-7, F-853412 ......................H-1253424 .....................C-553443 .....................C-1953444 .....................C-1953445 .....................C-4, C-753446 .....................C-1953447 .....................C-1953464 .....................F-3, F-5, F-653475 ......................C-4, C-8, F-653502 .....................G-253503 .....................G-2, G-653505 .....................C-1753580 .....................B-2653590 .....................B-2753599 .....................B-2753600 .....................B-753601 .....................B-2753602 .....................B-2753609 .....................C-2053632 .....................B-4, B-753643 .....................G-453644 .....................G-453646 .....................G-453647 .....................G-4, G-553648 .....................G-4, G-553649 .....................G-4, G-553660 .....................B-2053690 .....................C-753793 .....................B-2753816 ......................D-2, D-4, D-5, D-6, H-553844 .....................G-353877 .....................G-453915 ......................C-853959 .....................C-853967 .....................E-854017 ......................G-454018 ......................G-454019 ......................G-454021 .....................G-4, G-554022 .....................G-4, G-554174 ......................E-1654176 ......................E-1654222 .....................D-754223 .....................D-754242......................G-2054243 .....................G-2054244 .....................G-2054246 .....................G-2154247 ......................G-2154248 .....................G-21


J-4

Index20,000 PSI

IND

EX

US & Canada: 800-231-8192 or 832-590-1300


54249 .....................G-2154251 ......................G-2154252 .....................G-2154256 .....................G-1754258 .....................G-1754275......................G-354276......................G-254277 .....................G-254282 .....................G-4, G-554283 .....................G-4, G-554284 .....................G-554285 .....................G-254297 .....................G-4, G-554311 ......................G-2254321 .....................C-5, C-854328 .....................C-1754331 .....................G-354332 .....................G-354333 .....................G-354334 .....................G-354335 .....................F-454336 .....................G-354337 .....................G-354338 .....................G-354342 .....................C-554375 .....................F-254386 .....................D-754387 .....................D-754388 .....................D-754389 .....................D-754392 .....................C-6, F-854395 .....................F-454425 .....................F-254426 .....................B-2954441 .....................G-4, G-554442 .....................G-4, G-554443 .....................G-4, G-554452 .....................G-1054460 .....................F-854498 .....................B-2954504 .....................B-2954509 .....................B-2954530 .....................G-1054535 .....................G-1054565 .....................B-2854584 .....................C-9, C-1254592 .....................C-954593 .....................C-9, C-1254595 .....................C-2054600 .....................C-2054627 .....................B-1354638 .....................B-1354690 .....................B-1354730......................B-254731 ......................D-754732 ......................D-754733......................D-754737 ......................E-254738......................E-354739......................E-354741 ......................E-354743 ......................E-454744 ......................E-454746 ......................E-454747 ......................E-454748 ......................E-454749 ......................E-354752 ......................E-854753 ......................E-754754 ......................E-1054754-B..................E-1054767 ......................E-1054768......................E-1054780......................B-20

54790 .....................B-2254792......................E-1654793......................D-754794......................D-754795......................B-2454796 .....................D-754797 ......................D-754798......................D-754799 .....................D-754801 .....................D-754802 .....................D-754803 .....................D-754820 .....................B-2254824 .....................B-1354826 .....................B-1354827 .....................B-1354828 .....................B-13, B-15, B-21, B-23, B-2754844 .....................B-13, E-554846 .....................B-13, B-15, E-554847 .....................B-1354854 .....................B-1354868 .....................G-854869 .....................G-854870 .....................B-2454871......................G-854881 .....................G-954882 .....................G-954883 .....................G-954884 .....................G-14, G-1654886 .....................G-14, G-1654887 .....................G-1554888 .....................G-2354889 .....................G-2354938 .....................E-554965 .....................B-1454966 .....................B-15, B-21, B-23, B-2755253 .....................B-4, B-755260 .....................H-555263 .....................B-2055290 .....................B-2855296 .....................E-555304 .....................C-1255411 ......................C-555432 .....................F-7, F-855465 .....................B-1655477 .....................B-1555519 ......................C-1055520 .....................C-1055521 .....................C-1055522 .....................C-1055523 .....................C-1055524 .....................C-1055531 .....................C-1055540 .....................C-1055567 .....................C-1055570 .....................C-1056547 .....................E-1056551 .....................C-1956714 ......................B-856988 .....................F-256999 .....................C-4, C-657000 .....................F-557065 .....................F-357095 .....................F-5, F-657157 ......................C-1257164 ......................C-1257202 .....................C-757292 .....................C-457296 .....................C-757853 .....................C-2257856 .....................C-2257951 ......................F-3, F-657954 .....................F-3, F-5, F-657955 .....................F-5

57956 .....................F-3, F-657958 .....................F-557970 ......................C-1957986 .....................F-557998 .....................H-1258000 .....................C-2258002 .....................C-2258044 .....................C-2258305 .....................C-2258314 ......................C-2258368 .....................C-2158414 ......................C-2158848 .....................C-458901 .....................H-758901-V ..................H-758902 .....................H-758902-V ..................H-758903 .....................H-1058904 .....................H-958905 .....................H-958907 .....................H-1058932 .....................H-1058944 .....................H-858945 .....................H-858946 .....................H-858947 .....................H-858948 .....................H-858949 .....................H-858950 .....................H-858951 .....................H-858952 .....................H-858955 .....................H-1058956 .....................H-858956-V ..................H-858957 .....................H-858957-V ..................H-858958 .....................H-858958-V ..................H-858959-V ..................H-858960-V .................H-858961-V ..................H-858962 .....................H-758962-V ..................H-758963 .....................H-758963-V..................H-758964 .....................H-758964-V ..................H-758965 .....................H-758965-V..................H-758966 .....................H-858966-V..................H-858967 .....................H-858967-V ..................H-858968 .....................H-858968-V..................H-858969-V..................H-858970-V ..................H-858971-V ..................H-858972 .....................H-958973 .....................H-958974 ......................H-958978 .....................H-958979 .....................H-958980 .....................G-11, H-958981 .....................G-11, H-958982 .....................H-958983 .....................H-958984 .....................H-958985 .....................H-958986 .....................H-958987 .....................H-958988 .....................H-958989 .....................H-958990 .....................H-9

J-5

Index20,000 PSI

IND

EX

www.waterblast.com


58991 .....................H-958992 .....................H-958993 .....................H-958996 .....................H-1058997 .....................H-1058998 .....................H-958999 .....................H-959000 .....................H-1059001 .....................H-1059002 .....................H-1059003 .....................H-1059004 .....................H-1059005 .....................H-1059006 .....................H-1059008 .....................H-459009 .....................H-459010......................H-459011 ......................H-459012 ......................H-459013 ......................H-459014 ......................H-459015 ......................H-1059016......................H-1059229 .....................H-659299 .....................F-459342 .....................E-959379 .....................F-759383 .....................C-859388 .....................F-3, F-659463 .....................B-2659487 .....................B-2259489 .....................B-2259492 .....................H-959687 .....................B-2459688 .....................B-2459853 .....................H-859854 .....................H-859855 .....................H-859859 .....................H-859860 .....................H-859861 .....................H-859869 .....................H-859870 .....................H-859871......................H-859873 .....................H-759873-V ..................H-759874 ......................H-759874-V ..................H-759875......................H-7, H-959875-V ..................H-759876......................H-7, H-959876-V ..................H-759877 .....................H-960022 .....................C-860023 .....................C-860024 .....................C-860025 .....................C-860026 .....................C-860027 .....................C-860075 .....................C-860078 .....................C-860079 .....................C-860248 .....................B-1360396 .....................H-1060420 .....................F-5, F-860765 .....................C-1560766 .....................C-1560815......................B-2961283 ......................H-661284 ......................H-661288 ......................H-661331 ......................C-1461376 ......................C-1361378 ......................C-14

61415 ......................H-1061422 ......................F-261447 ......................G-11, H-661448 ......................H-661449 ......................H-661450 ......................H-661461 ......................H-661474 ......................C-1461503 ......................E-561553 ......................E-161607 ......................C-2161627 ......................C-2261647 ......................E-161686-08 ................C-1461687 ......................C-1461881 ......................F-3, F-561904_0..................C-1561993......................C-1562025 .....................C-862026 .....................C-862113 ......................A-362257 .....................H-462288 .....................E-570125 ......................C-1070127 ......................C-1070130 ......................C-1070173 ......................C-9, C-1270174 ......................C-9, C-1270179 ......................B-13, C-370192 ...................... I-1170930 .....................C-370941 ......................D-4, D-571017 ......................B-4, B-771079 ...................... I-1171080...................... I-1171081 ...................... I-1171086...................... I-1171087 ...................... I-1171088 ...................... I-1171090...................... I-1171091 ...................... I-1171093...................... I-1171094 ...................... I-1171095 ...................... I-1171096...................... I-1171097 ...................... I-1171098...................... I-1171099...................... I-1171147 ......................H-1271147-FE .................H-1271202 ......................C-2271254 ......................C-2171318 ......................B-4, B-771495 ......................C-9, C-1271496 ......................C-9, C-1271743 ......................H-271744 ......................H-12BJ286L ...................G-12BJ286M ..................G-12BJ286S ...................G-12BJ288L ...................G-12BJ288M ..................G-12BJ288S ...................G-12J55768 ....................F-3J55780....................C-4J55785....................H-5J55800 ...................C-11J55868 ...................C-6J55870 ....................C-6J55877 ...................B-13, B-15, B-21, B-23, B-27J55885 ...................B-26J55890 ...................B-26J56204 ...................C-21J56366 ...................C-4, C-6

J56373....................C-19J70315 ....................H-11J70316 ....................H-11J70317 ....................H-11J70318 ....................H-11J70321 ....................H-11J70322....................H-11J70323 ....................H-11J70324 ....................H-11J70326 ....................H-11J70327 ....................H-11J70413 ....................H-12J70518 ....................B-13J70554 ...................B-15J70555....................B-15J70556....................B-15J70610 ....................C-21J70611 ....................C-21J70633 ...................C-4, C-6J70804 ...................H-6J70917 ....................C-21S422-20-8-B ..........C-2S422-20-8-S ..........C-2S422-20-9-B ..........C-2S422-20-9-S ..........C-2S422-20-10-B ........C-2S422-20-10-S ........C-2S422-20-11-B .........C-2S422-20-11-S .........C-2S1302-20-6-B ........C-2S1302-20-6-S ........C-2S1302-20-7-B .........C-2S1302-20-7-S .........C-2SP302-20-6-B .......C-2SP302-20-6-S ........C-2SP302-20-7-B ........C-2SP302-20-7-S ........C-2SP422-20-8-B ........C-2SP422-20-8-S ........C-2SP422-20-9-B ........C-2SP422-20-9-S ........C-2SP422-20-10-B ......C-2SP422-20-10-S ......C-2SP422-20-11-B .......C-2SP422-20-11-S .......C-2

J-6

Index20,000 PSI

IND

EX

US & Canada: 800-231-8192 or 832-590-1300

PROdUCT PAGe PROdUCT PAGe

PART NUMBERS

A

Abrasive Cutting Nozzle .............................................................. G-23Air-Operated Diverter Valve ..................................................C-4–C-5Anti-Seize, Thread Lubricant ......................................................... E-1Apparel, Safety .....................................................................H-7–H-10Automated Rigid Lance Cleaning .................................................... IVAutomated Waterblasting Solutions ..............................................A-4

B

Bareshaft Pump ..............................................................................B-1Features and Benefits .............................................................B-1Model 3020 ....................................................................B-8–B-10Model 3620 ..................................................................... B-5–B-7Model 4220 ..................................................................... B-2–B-4

Blue Goop Thread Lubricant .......................................................... E-1Boots ................................................................................... H-10, H-11Bypass Valve.................................................................................. C-9

C

CartridgesBypass Valve ........................................................................... C-9Diverter Valve Air-Operated (Dump)...............................C-4–C-5Diverter Valve Air-Operated (Shut-In) .................................... C-6Electronic Hydro-Throttle ......................................................C-19Hydraulic Diverter Valve ......................................................... C-8Mechanical Hydro-Throttle .................................................. C-20Multi-Gun Valve (MGV) ..........................................................C-11Regulator Valve Long Handle (Dump Style) ..........................C-10

Connection Types ............................................................................ I-2Jetstream 20K Port ................................................................... I-2Jetstream Lance ....................................................................... I-5Medium Pressure ...................................................................... I-4Medium Pressure Tube............................................................. I-5Type M ....................................................................................... I-6

Connectors. See FittingsControl Guns ................................................................................... F-1

Foot Guns ................................................................................ F-7Durasafe Dump Style........................................................ F-7Durasafe Shut-In Style .....................................................F-8

Hand Guns ............................................................................... F-2Durasafe Dump Style........................................................ F-2Durasafe Shut-In Style .....................................................F-4Zero Thrust........................................................................F-6

Convertion Table.............................................................................. I-1Cooler Tube, Vortex ......................................................................H-10Custom Units ..................................................................................A-2

D

Diverter Valve .........................................................................C-4–C-5Air-Operated (Dump) ......................................................C-4–C-5Air-Operated (Shut-In) ............................................................ C-6Electric .....................................................................................C-7Hydraulic ................................................................................. C-8

DurasafeFoot Guns ................................................................................ F-7Hand Guns ........................................................................... V, F-2

DVD, Pump Operation and Maintenance...................................... C-3

E

Electric Units ...............................................................................V, A-2Electronic Hydro-Throttle .............................................................C-19End Fittings .................................................................................... D-5

Jetstream Lance Female ........................................................ D-6Medium Pressure Nozzle Nipples .......................................... D-6Medium Pressure Tube Nipples ............................................. D-5Type M Female ........................................................................ D-5

F

Face Shield ...................................................................................H-11Filters

Bags ...................................................................................... C-21Guardian System .................................................................. C-21Standard Filters .................................................................... C-21

Fittings ............................................................................................ E-1High Pressure ..........................................................................E-5

High Pressure HHP Male To 1” Medium Pressure Female Adapter.................................................................E-5High Pressure HHP Male To Jetstream Lance Female Adapter.................................................................E-5High Pressure HHP Male To Metric .................................E-5High Pressure HHP Male To Port Female ........................E-5High Pressure HHP Male To Type M Male Adapters ...................................................................E-5

Medium PressureMedium Pressure Anti-Vibration Gland Assemblies ..... E-13Medium Pressure Crosses ............................................. E-11Medium Pressure Elbows ............................................... E-11Medium Pressure Female To Npt Male Adapters .......... E-14Medium Pressure Gland, Nuts, Collars, and Plugs ....... E-13Medium Pressure Male Connectors .............................. E-10Medium Pressure Male To Medium Pressure Female Connections ....................................................... E-13Medium Pressure Rigid Lance Holders ......................... E-16Medium Pressure Straight Couplings ............................ E-12Medium Pressure Tees ................................................... E-11Medium Pressure To NPT Connectors .......................... E-14Medium Pressure Union Couplings ............................... E-12Metric Male ....................................................................... E-7

Port ...........................................................................................E-2Multi-Port Adapter ............................................................E-4Port Female To Medium Pressure Female Adapters .......E-4Port Female To Quick Disconnect Male Adapter ............E-3Port Female To Type M Male Adapters ............................E-4Port Male Nipple ...............................................................E-2Port Male To Medium Pressure Female Adapters ...........E-2Port Male To Medium Pressure Male Adapters ...............E-3Port Male To Quick Disconnect Female Adapter ............E-2Port Male To Quick Disconnect Male Adapter ................E-2Port Plug ...........................................................................E-3

Quick Disconnect ....................................................................E-6Quick Disconnect Female To Medium Pressure Female Adapters ...............................................................E-6Quick Disconnect Female To Medium Pressure Male Adapters ...................................................................E-6Quick Disconnect Female To Type M Male Adapters ...................................................................E-6Quick Disconnect Male Flex Lance Connectors .............E-8Quick Disconnect Male Rigid Lance Holders ..................E-8Quick Disconnect Male To Medium Pressure Female Adapters ...............................................................E-8Quick Disconnect Male To Medium Pressure Male Adapters ................................................................... E-7Quick Disconnect Male to MP Tube Lance Female Adapter................................................................. E-7Quick Disconnect Male To Type M Male Adapters ......... E-7

Screw Type Quick Connect Couplings ................................. E-10Slimline Lance Couplings ...................................................... E-17Slimline Male To Female Tube Adapters ............................... E-16Type M ......................................................................................E-9

Type M Male Connectors .................................................E-9Type M Male To Medium Pressure Male Connectors .....E-9Type M Male To NPT Male Adapter..................................E-9

Flex Lance Cleaning ......................................................................... IVFlex Lances .................................................................................... D-3

Safety Grip .............................................................................. H-5Fluid End UNx ............................................................................... B-11

Features and Benefits ........................................................... B-11

J-7

Index20,000 PSI

IND

EX

www.waterblast.com

Model 3020 .................................................................. B-16–B-17Model 5020Q ............................................................... B-12–B-13Models 4220 & 3620 .................................................... B-14–B-15

Fluid End Upgrades ......................................................................B-18Butterworth L-375 Pumps ...........................................B-22–B-23Butterworth L-450 Pumps .......................................... B-20–B-21Gardner-Denver TF-375 Pumps ..................................B-22–B-23Gardner-Denver Tf-450 Pumps .................................. B-20–B-21NLB Quintuplex Pumps .........................................................B-26NLB Triplex Pumps ......................................................B-24–B-25WOMA 150 Series Pumps .......................................... B-28–B-29

Foot Guns ....................................................................................... F-7Foot Protection

Boots ......................................................................................H-11Shin & Foot Guards ...............................................................H-11TST Boots 3000 .....................................................................H-10

Formulas .......................................................................................... I-1

G

Gaiters ...........................................................................................H-10Gauges

Belt Tension ............................................................................ C-3Pressure Gauge .................................................................... C-22

Gloves ...........................................................................................H-11TST Pro-Operator Gloves ......................................................H-10

Grease Remover, TST ..................................................................H-10Guardian

Fill Valve Assembly ............................................................... C-22Guns. See Control Guns

H

Hand GunsDurasafe Dump Style ............................................... F-2, F-2–F-3Durasafe Shut-In Style .................................................... F-4–F-5Zero Thrust ..............................................................................F-6

Hand Protection .................................................................... H-7–H-11Hard Hats ......................................................................................H-11High Pressure .................................................................................E-5Holders

Rupture Disc ..........................................................................C-17Hoses & Lances ..............................................................................D-1

Custom Order ......................................................................... D-4Hose

Abrasion Cover Guard ............................................................ D-4Burst Shield Guard ................................................................. D-4Hose Cover Options ............................................................... D-4Pressure Drop Data .......................................................... I-7–I-10Thermoplastic Hoses ............................................................. D-2

Hydroforce Units.............................................................................A-2Hydrostatic Test Valve (HTV) ..............................................C-13–C-14Hydro-Throttle ....................................................................C-19, C-20

L

Lances............................................................................................ D-3Flex Lances .....................................................................D-3–D-4Pressure Drop Data .................................................................. I-9Rigid Lances ............................................................................D-7

LubricantsThread ...................................................................................... E-1

M

Manual Rigid Lance Cleaning .......................................................... IVMulti-Gun Valve (MGV) .................................................................C-11Multi-Unit Manifold (MUM) ...........................................................C-12

N

Nipples .......................................................................................... E-15Lance Close Nipples ............................................................. E-16

Nozzles........................................................................................... G-1HP Surface Cleaning Nozzles ................................................ G-8

HP0 & HP15 Carbide Nozzles ......................................... G-8HPS0 Sapphire Nozzles .................................................. G-9

Orbi-Jet ................................................................................... G-6OR Series Carbide Nozzles ............................................. G-7ORS Series Sapphire Nozzles ......................................... G-7

Orbi-Jet QCX .......................................................................... G-2OX Series Carbide Nozzles ............................................. G-3UHPX Series Sapphire Nozzles....................................... G-4

Pipe Cleaning Nozzles ................................................ G-15–G-16RM Series Carbide Nozzles ...........................................G-16RMS Series Sapphire Nozzles .......................................G-16

Rotomag.................................................................................G-102-D Pipe Cleaning Nozzle ...............................................G-10RM Series Carbide Nozzles ...........................................G-13RMS Series Sapphire Nozzles .......................................G-14

O

Online Training with Federal Signal ESG University ......................A-3

P

Parts. See Replacement PartsPort Fittings. See FittingsPressure Gauge ........................................................................... C-22Pump Accessories ..........................................................................C-1

Diverter Valve .................................................................. C-4, C-5Electronic Hydro-Throttle ......................................................C-19Guardian Tank Fill Valve Assembly ...................................... C-22Hydraulic Diverter Valve ......................................................... C-8Hydro-Throttle..............................................................C-19, C-20Mechanical Hydro-Throttle .................................................. C-20Pressure Gauge .................................................................... C-22Regulator Valve, Long Handle ...............................................C-10Rupture Disc Holders ............................................................C-17Standard Filters .................................................................... C-21Thread Lubricants ................................................................... E-1Tools ........................................................................................ C-3

Belt Tension Gauges........................................................ C-3Manifold Mounting Studs ................................................ C-3Pump Operation and Maintenance DVD ......................... C-3Pump Wrenches .............................................................. C-3Valve Puller ....................................................................... C-3

R

Rain Suits ......................................................................................H-11Replacement Parts

Butterworth L-375 Pumps .....................................................B-23Butterworth L-450 Pumps .....................................................B-21Fluid End Model 3020 ............................................................B-17Fluid End Model 4220/3620 ..................................................B-15Gardner-Denver TF-375 Pumps ............................................B-23Gardner-Denver TF-450 Pumps ............................................B-21NLB Quintuplex Pumps Up To 250 Horsepower ..................B-27Nlb Triplex Pumps 150 To 225 Horsepower .........................B-25Safety Shrouds ....................................................................... H-3UNx Bareshaft Pump Model 3020 ........................................B-10UNx Bareshaft Pump Model 3620 ..........................................B-7UNx Bareshaft Pump, Model 4240/3640 ............................... B-4UNx Fluid End Model 5020Q .................................................B-13WOMA 150 Series Pumps .....................................................B-29

Rotomag .......................................................................................G-10Accessories ....................................................... G-11, G-11–G-12

Rupture Disc Holders ...................................................................C-17

S

Safe Operation & Maintenance Training Class ..............................A-3Safety

Caution Sign ..........................................................................H-12Covered Safety Whips ............................................................ H-5Decal ......................................................................................H-12Flex Lance Safety Grip ........................................................... H-5Jetstream PBA ........................................................................ H-6Safety Accessories

Boots ...............................................................................H-11Ear Plugs .........................................................................H-11


J-8

Index20,000 PSI

IND

EX

US & Canada: 800-231-8192 or 832-590-1300


Face Shield .....................................................................H-11Glasses ...........................................................................H-11Goggles ...........................................................................H-11Hard Hat ..........................................................................H-11Shin & Foot Guards ........................................................H-11Water Protection Suits ....................................................H-11

Safety ApparelTST Apron .......................................................................H-10TST Balaclava .................................................................H-10TST Boots 3000 ..............................................................H-10TST Delta Kit .................................................................... H-8TST Gaiters .....................................................................H-10TST Gamma Kit .................................................................H-7TST Hand Protection ....................................................... H-9TST Jacket ....................................................................... H-9TST Overall ....................................................................... H-9TST Pro-Operator Gloves ...............................................H-10TST Sigma Kit .................................................................. H-8TST Trousers .................................................................... H-8TST Waistcoat .................................................................. H-9TST Waistcoat w/Apron ..................................................H-10TST Waterjet Protection ...................................................H-7Turtleskin Waterarmor ......................................................H-7

Safety Grip Accessories ......................................................... H-5Lance Stop Retainers ...................................................... H-5Lance Stops ..................................................................... H-5Safety Grip Shield ............................................................ H-5

Safety Hose Checks ..............................................................H-12Shrouds ................................................................................... H-3Sign ........................................................................................H-12Tape ........................................................................................H-12TST Grease Remover ............................................................H-10TST Hose Shrouds.................................................................. H-4Vortex Cooler Tube ................................................................H-10Warning Sticker .....................................................................H-12

Safety Glasses ..............................................................................H-11Safety Grip, Flex Lance ................................................................. H-5Safety Manual .................................................................................A-3Safety Shrouds .............................................................................. H-3

TST Hose Shrouds.................................................................. H-4Safety Tape, Signs And Decals ....................................................H-12Safety Video ....................................................................................A-3Safety Whips, Covered .................................................................. H-5Shin & Foot Guards ......................................................................H-11Shin Protection .............................................................................H-11Shroud Safety ................................................................................ H-3Signs .............................................................................................H-12Spare Parts Packages ................................................................... C-2System .............................................................................................. IV

Surface Cleaning Systems ......................................................... VTube Cleaning System ............................................................... IV

T

Table of Contents ..........................................................................II–IIITechnical

Threading and Coning Tools ...................................................I-11Thread Lubricants .......................................................................... E-1Throttle Controls ...........................................................................C-19

Electronic Hydro-Throttle ......................................................C-19Mechanical Hydro-Throttle .................................................. C-20

Tools ............................................................................................... C-3Belt Tension Gauge ................................................................ C-3Manifold Mounting Studs ....................................................... C-3Pump Operation And Maintenance DVD ............................... C-3Pump Wrenches ..................................................................... C-3Valve Puller .............................................................................. C-3

Trailers. See UnitsTraining............................................................................................A-3TST ..................................................................................................H-7Turtleskin Waterarmor ....................................................................H-7

U

Units ................................................................................................A-1Custom .....................................................................................A-2Electric .................................................................................V, A-2Hydroforce ...............................................................................A-2X-Series ....................................................................................A-1

UNx Bareshaft PumpsFeatures And Benefits .............................................................B-1Model 3020 ....................................................................B-8–B-10Model 3620 ..................................................................... B-5–B-7Model 4220 ..................................................................... B-2–B-4Model 4240/3640 .................................................................... B-4

UNx Fluid EndFeatures & Benefits ............................................................... B-11Model 3020 ............................................... B-16–B-17, B-17–B-18Model 5020Q ............................................B-12–B-13, B-13–B-14Models 4220 & 3620 .................................B-14–B-15, B-15–B-16Spare Parts Packages ............................................................ C-2

UNx Fluid End UpgradesButterworth L-375 PumpsGardner-Denver TF-375 Pumps ............. B-22–B-23, B-23–B-24Butterworth L-450 Pumps .......................B-20–B-21, B-21–B-22NLB Quintuplex Pumps Up To 250 Horsepower B-26–B-27, B-27–B-28NLB Triplex Pumps 150 to 225 Horsepower ............................................ B-24–B-25, B-25–B-26WOMA 150 Series Pumps ................................ B-28–B-29, B-29

V

Valves20K Check Valve ....................................................................C-15Bypass .................................................................................... C-9Diverter Valve .................................................................. C-4, C-5Electric Diverter Valve .............................................................C-7Hydraulic Diverter Valve ......................................................... C-8Hydrostatic Test Valve (HTV) .......................................C-13–C-14Multi-Gun Valve (MGV) ..........................................................C-11Multi-Unit Manifold (MUM) ....................................................C-12Nozzle Shut-Off Valve (NSOV) ..............................................C-16Regulator, Long Handle (Dump Style)...................................C-10Severe Service Relief Valve ...................................................C-18Valve Puller .............................................................................. C-3

VideosMaintenance DVD ................................................................... C-3Safety Video .............................................................................A-3

Visual Safety System ..................................................................... H-2

W

WhipsCovered Safety ....................................................................... H-5

X

X-Series ...........................................................................................A-1

J-9

Index20,000 PSI

IND

EX

www.waterblast.com

JETSTREAM WARRANTYLimited Warranty. Each Waterblast Unit, Bareshaft Pump, and Fluid End manufactured by Jetstream is warranted against defects in material and workmanship for a period of 12 months or 1000 hours, provided it is used in a normal and reasonable manner and in accordance with all operating instructions. If sold to an end user, the applicable warranty period commences from the date of delivery to the end user. If used for rental purposes, the applicable warranty period commences from the date of delivery to the party holding the equipment available for rent. This limited warranty may be enforced by any subsequent transferee during that warranty period. This limited warranty is the sole and exclusive warranty given by Jetstream.

Exclusive Remedy. Should any warranted product fail during the warranty period, Jetstream will cause to be repaired or replaced, as Jetstream may elect, any part or parts of such Waterblast Unit, Bareshaft Pump, or Fluid End that the examination discloses in Jetstream’s sole judgment to be defective in material or factory workmanship. Repairs or replacements are to be made at Jetstream in Houston, Jetstream FS Solutions Rental Center, the customer’s location, or at other locations approved by Jetstream. Labor is furnished only when the unit or part is returned to the factory or when travel and expenses are paid by the purchaser. Freight, travel and expenses incurred in connection with repair or warranty are excluded from this warranty and shall be paid by the purchaser. The foregoing remedies shall be the sole and exclusive remedies of any party making a valid warranty claim.

The Jetstream Limited Warranty shall NOT apply to (and Jetstream shall NOT be responsible for):1. Major components or trade accessories that have a seperate warranty from their original manufacturer, such as, but not limited

to: diesel engines, electric motors, electronic soft starter and/or across the line starter panels, axles, PTO’s, clutch packs, high pressure guages, high pressure hoses, flex lances, etc.

2. Normal adjustments and maintenance services. 3. Normal wear parts such as, but not limited to: oil, clutches, belts, filters, packing, cartridges, univalves, face seals, diffusers, gland

nuts, bushings, plungers, nozzles, rupture discs, etc. 4. Failures resulting from the machine being operated in a manner or for a purpose not recommended by Jetstream including failures

or malfunctions resulting from corrosion, misapplication, overpressurization, inadequate pump suction conditions, improper water quality, improper maintenance, or misuse.

5. Repairs, modifications or alterations which in Jetstream’s sole judgment, have adversly affected the machine’s stability, operation or reliability as originally designed and manufactured.

6. Items subject to misuse, negligence, accident or improper maintenance.

*NOTE* The use of any part other than ones approved by Jetstrean may invalidate this warranty. Jetstream reserves the right to determine, in its sole discretion, if the use of non-approved parts invalidates the warranty. Nothing contained in this warranty shall make Jetstream liable for loss, injury, or damage of any kind to any person or entity resulting from any defect or failure in the machine or part.

THIS WARRANTY IS, AND SHALL BE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE DISCLAIMED. THIS DISCLAIMER AND EXCLUSION SHALL APPLY EVEN IF ANY WARRANTY POSSIBLY ASSERTED FAILS OF ITS ESSENTIAL PURPOSE.

This warranty is in lieu of all other obligations or liabilities, contractual and otherwise, on the part of Jetstream. For the avoidance of doubt, Jetstream shall not be liable for any indirect, special, incidental or consequential damages, including, but not limited to, loss of use or lost profits. Jetstream makes no representation that the unit has the capacity to perform any functions other than as contained in Jetstream’s written literature, catalogs or specifications accompanying delivery of the machine. No person or affiliated company representative is authorized to alter the terms of this warranty, to give any other warranties or to assume any other liability on behalf of Jetstream in connection with the sale, servicing or repair of any machine manufactured by Jetstream. Any legal action based hereon must becommenced within eighteen (18) months of the event or facts giving rise to such action.

Jetstream reserves the rigth to make design changes or improvements in its products without imposing any obligation upon itself to change or improve previously manufactured products. (Rev 2-13)

J-10

Index20,000 PSI

US & Canada: 800-231-8192 or 832-590-1300

NOTES

Worldwide, thousands of contractors, plants, municipalities, and the military turn to Jetstream for our comprehensive offering of industrial, high-pressure waterblast equipment, parts and accessories. These demanding customers keep coming back to Jetstream year after year for the superior performance of our products and the unmatched technical support and customer service available to them day and night.

Count on Jetstream for the products and value-added services that make the difference!

• Waterblast equipment up to 40,000 psi (2750 bar)

• Thousands of high-quality parts and accessories in stock and available for same day shipping (see below, right)

• 24/7 Support Program (see right)

• Comprehensive web site (www.waterblast.com)

• High-caliber sales team and distribution network offer unmatched expertise in products and applications to provide the best solution for any job

• Start-up training on all new equipment — see Right Start Program page A-5

• Fully staffed engineering and R&D departments

• Innovative UNx® Fluid End — up to 40,000 psi (2750 bar) with upgrades available for most popular pumps, including NLB, Butterworth and Woma

We’re there anytime you need us!Shutdowns are expensive endeavors, and plants choose contractors that they can rely on to work around-the-clock to minimize production downtime. When problems arise, or a part is needed, it can’t always wait until the next day! That’s why Jetstream is available day and night, seven days a week. The 24/7 Support Program provides Jetstream customers a competitive advantage with uninterrupted access to critical parts and accessories*, service and expertise to keep the job running.

713-302-7718 24/7 SUPPORT HOTLINE

Fast order processing!Jetstream is driven to provide an edge to our customers. Among the most important value-added advantages Jetstream offers is access to a huge inventory of high quality parts and accessories and a customer-focused team to ensure that the products get where they need to be, when they need to be there. Over 90 percent of all orders** ship the very same day.

* Additional charges apply to after-hours order fulfillment** Applies to orders received by 3:00 p.m. US Central Time

I

Your Waterblast Solutions Provider

Call us today or visit our web site at www.waterblast.com Jetstream of Houston, LLP.A division of Federal Signal Corporation5905 Thomas RoadHouston, TX 77041

(832) 590-1300 — Phone(832) 590-1304 — Fax(800) 231-8192 — Toll Free(713) 302-7718 — 24/7 Hotline

Office Hours: Monday-Friday7:00 am to 6:00 pm (US Central Time)

Other Environmental Solutions Group companies include:

Guzzler Manufacturing is the world's leader in industrial vacuum loaders for use in cleaning up industrial waste and recovering and recycling valuable raw materials. With the widest range of offloading options available, Guzzler products are designed to vacuum a full spectrum of materials – from solids and dry bulk powders, to liquids, slurries, and thick sludge – in such industrial areas as cement plants, steel mills, railroads, oil refineries, chemical plants, foundries and power-generating stations.

www.guzzler.com

www.waterblast.com

www.elginsweeper.com

www.vactor.com

Elgin Sweeper products are the sweepers of choice for a variety of general street maintenance, special industrial and airport applications. With more than 100 years of experience, Elgin Sweeper offers municipalities, contractors and industries the most sweeper options in the country, using the latest sweeping technologies—mechanical, pure vacuum, regenerative air, alternative fuel and waterless dust control.

Jetstream has been recognized as a leading manufacturer of waterblast systems, pumps, accessories and replacement parts for over 30 years. Our proven product performance is driven by continuous R&D and supported by a dedicated engineering team and a world-class manufacturing operation.

All critical components are manufactured in-house to the highest quality standards. Parts are 100 percent inspected and performance tested before shipment to the customer. With a huge parts inventory, multiple service locations, and factory-trained technicians worldwide, every Jetstream customer has the highest level of support needed to achieve optimum productivity morning, noon and night.

Jetstream is an integral member of the Environmental Products Group within Federal Signal Corporation. This alliance affords Jetstream unlimited access to an expanded range of resources and expertise, including engineering, materials, testing, manufacturing and quality control. More importantly, it provides contractors and other market segments with access to a broad range of industry-leading environmental products from a single, reliable source.

The leader in sewer and catch basin cleaners for nearly 50 years, Vactor Manufacturing produces a wide range of combination sewer cleaners and jetters for sewer line maintenance, as well as a range of robust vacuum excavators, featuring innovative technology and custom configurable designs.www.vactor.com

P/N 29390 Effective 02/2015© 2015 Jetstream of Houston, LLC. All rights reserved.

Jetstream® and UNx® are registered trademarks of Federal Signal. Federal Signal is listed on the NYSE by the symbol FSS. Specifications and equipment listed are subject to

change without notice. Some photos are shown with optional equipment.

20,000 PS

I (1,379 BA

R) P

RO

DU

CT

CA

TALO

G

20,000 PSI1379 BAR

Product Catalog

A Growing Nationwide Network of Service Centers

FS Solutions centers bring key resources closer to home.

• Expert safety and applications training

• Rental equipment• High-performance parts• Waterblast accessories• Equipment rebuilding• Used equipment sales

®

Leeds, AL - 800-822-8785

Gonzales, LA - 225-647-0660

Highland, IN - 219-924-3180

La Porte, TX - 281-674-8668

Lexington, SC - 803-996-0741

New Brunswick, NJ - 732-448-7830

Toledo, OH - 888-415-RENT

Long Beach, CA - 866-515-9891

Lakewood, WA - 253-584-0653

Williston, ND - 701-572-7425

Jetstream of Houston, LLP5905 Thomas Rd. • Houston, TX 77041

Phone: (832) 590-1300 • Fax: (832) 590-1304 • Toll Free: (800) 231-8192

www.waterblast.com

Date post:	23-Mar-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

20,000 PSI - Metco Industrial

Documents