OSI60414 place settings

Thank you for introducing our family to yours

At Omega, we understand that cooking, cleaning and washing may not be your favourite things in the world. That's why we created a range of no-nonsense, reliable

products that always get the job done for you. With the features you need and nothing you don't. What's more, they're made to fit perfectly into your home life and

your wallet.

We aim to simplify any further appliance purchases. When researching our products you will find a range of icons that visually represent our products key features. Visit our website to learn more about these icons and the features and benefits of our

products.

You are welcoming an Omega appliance into your place and you can be sure it'll always serve you well.

For important information about your Omega such as warranty registration, online manuals, specifications and catalogues, please visit

www.omegaappliances.com.au/customer (if you are in Australia) or www.omegaappliances.co.nz/customer (if you are in New Zealand).

Make sure you activate your product warranty on our websites on the links above.

If you want to know more about promotions, to receive cool tips and tailor made content, like us on www.facebook.com/omegaappliances and follow us on

www.instagram.com/omegaappliances_aus.

We hope you love this product as much as we do!

www.omegaappliances.com.au / www.omegaappliances.co.nz

omegaappliances

omegaappliances_aus

For each wash cycle.

For programs with pre-wash only.(Follow the user instructions)

Electric indicator on control panel (if provided).Check the rinse aid level

Load the baskets

Select a program

Running the dishwasher

Switch off the appliance

Turn off the water tap,unload the baskets

Fill the detergent dispenser

Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid scald,asthe dishes and utensils are still hot and more susceptible to break.They could also dry better.Unload the appliance, starting from the lower basket.

Changing the program

Add forgotten dishes in thedishwasher.

Scrape off any large food particles. Soften remnants of burnt food in pans,then load the baskets. Refer to the dishwasher loading instructions.

When the working cycle is finished, the buzzer of thedishwasher will sound 8 times, then stop.Turn off the appliance using the On/Off Button.Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.

If the appliance is switchedoff during a wash cycle.

Open the door carefully.Hot steam may escapewhen the door is opened!

If the appliance is switched off during a wash cycle, when switchedon again, please re-select the washing cycle and operate the dishwasheraccording to the original Power-on state ).

Switch on the appliance

For detailed operating method read the corresponding content on the instruction manual.

Open the door, p ress the On/Off button to switch on the appliance.

Turn on the water tap. . Press the start/pause button,the machine will start working.Close the door

Press the Program Button until the selected program lights up.( See the section entitled Operation instruction )? ?

1.Press the Start/Pause Button to stop the washing.2.Open the door a little .3.After the spray arms stop working, you can open the doorcompletely.4.Add forgotten dishes.5.Close the door6.Press the Start/Pause Button, the dishwasher will runafter 10 seconds.

1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergentmay have already been released and the water already drained. If this is the case, the detergentdispenser must be refilled.2. Press the Start/Pause button to stop the machine .Press the Program button more than

3 seconds , the machine will be in standby state, then you can change the program to thedesired cycle setting

A BC

This appliance must be grounded. In the event of amalfunction or breakdown, grounding will reducethe risk of anelectric shock by providing a path ofleast resistance of electric current. This applianceis equipped with a cord having an equipment-grounding conductor and a grounding plug.The plug must be plugged into an appropriate outletthat is installed and grounded in accordance withall local codes and ordinances.

When using your dishwasher, follow the precautions listed below:

Improper connection of the equipment-groundingconductor can result in the risk of an electric shock.Check with a qualified electrician or servicerepresentative if you are in doubt whether theappliance is properly grounded. Do not modify theplug provided with the appliance; If it does not fitthe outlet. Have a proper outlet installed by aqualified electrician.

Keep children away from detergent and rinse aid, keepchildren away from the open door of the dishwasher,there could still be some detergent left inside.

Do not abuse, sit on, or stand on the door or dishrack of the dishwasher.Do not touch the heating element during orimmediately after use.(This instruction is only applicable to machineswith a visual heating element.)

Do not wash plastic items unless they are markeddishwasher safe or the equivalent. For plastic itemsnot so marked, check the manufacturer'srecommendations.Use only detergent and rinse additivesdesigned for an automatic dishwasher.Never use soap, laundry detergent, or handwashing detergent in your dishwasher. Keepthese products out of the reach of children.

During installation, the power supply must notbe excessively or dangerously bent or flattened.Do not tamper with controls.

Do not place any heavy objects on or stand on thedoor when it is open. The appliance could tipforward.When loading items to be washed:1) Locate sharp items so that they are not likely

to damage the door seal;2) Knives and other utensils with

sharp points must be loaded in the basketwith their points down or placed in ahorizontal position.

WARNING:

When using your dishwasher, you shouldprevent plastic items from coming into contactwith the heating element.(This instruction is onlyapplicable to machines with a visual heatingelement.)

If the supply cord is damaged, it must be replacedby the manufacturer or its service agent or asimilarly qualified person in order to avoid a hazard.

Please dispose of packing materials properly.Use the dishwasher only for its intended function.

Remove the door to the washing compartment whenremoving an old dishwasher from service or discarding it.

Some dishwasher detergents are strongly alkaline,they can be extremely dangerous if swallowed.Avoid contact with skin and eyes and keep childrenaway from the dishwasher when the door is open.

Check that the detergent comparment is emptyafter completion of the wash cycle.

The appliance is to be connected to the watermains using new hose sets and that old hose-setsshould not be reused.

The maximum number of place settings to bewashed is 14The maximum permissible inlet water pressure is1Mpa.The minimum permissible inlet water pressure is0.04Mpa.

Children should be supervised to ensure that they donot play with the appliance.

This appliance is not intended for use by persons(including children )with reduced physical, sensory ormental capabilities, or lack of experience andknowledge ,unless they have been given supervisionor instruction concerning use of the appliance by aperson responsible for their safety.

The door should not be left open,since this could increase the risk of tripping.

Do not operate your dishwasher unless allenclosure panels are properly in place. Openthe door very carefully if the dishwasher isoperating, there is a risk of water squirting out.

If the appliance is installed on a carpet floor, takecare that openings in its base are not obstructed.

10 11

Back View

123

45

6

7

89

Front view

Lower basket

Upper basket

Cutlery rack

Top spray arm1 Inner pipe

5Dispenser6

Cup shelf

Spray arms

78

Filter assembly9

Inlet pipe connector

Drain pipe1110

32

4

12

Adjuster12

before using it for the first time.To get the best performance from your dishwasher, read all operating instructions

1.On/Off Button: To turn on/off the power supply.

2.Delay Button : Press the button to set a delay time.

3.

4.

6.Washing Program Button : Press the button toselect appropriate Program.

Display screen and optiond The indicator icon shows as follow.

: Show which programyou have chose .

Function Button : Press the button toselect appropriate Function.

5 Start /Pause Button: To start or pause the washingprogram..

IntensiveHeavy

Glass90MinRapid

Extra Drying to improve the drying efficiency.Power Wash to improve the cleaning efficiency.

Rinse detergent need to be refilled.Delay time3h 6h 9h

Normal

Before using your dishwasher for the first time:A. Fill the rinse aid dispenserB. Fill in detergent

Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spillswith a damp cloth. Don't forget to replace the cap before you close dishwasher door.

Attention!Clean up any rinse aid spill during filling with an absorbent cloth to avoid excess foaming during the next wash.

A. Filling the Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which canleave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher isdesigned to use liquid rinse aids. The rinse aid dispenser is located inside ,on the door and next to the detergent dispenser.To fil l the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.The volume of the rinse aid container is about 110ml.

Rinse Aid Dispenser

Function of Rinse AidRinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying.a

Warning!Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances(e.g. Dishwasher cleaning agent, l iquid detergent). This would damage the appliance.

As the rinse aid diminishes, the size of the black doton the rinse aid level indicator changes, as illustrated below.

Full3 / 4 full1 / 2 full1 / 4 full - Should refill to eliminate spottingEmpty

Unless the rinse-aid warning light on the control panel is on, you can always estimate the amount from thecolor of the optical level indicator "C "located next to the cap. When the rinse-aid container is full, the indicatorwill be fully dark. The size of the dark dot decreases as the rinse-aid diminishes. You should never letthe rinse aid level be less than 1/4 full.

When to Refill the Rinse Aid Dispenser

How to fill the Rinse Aid Dispenser

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out..Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to overflow

Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

123

C (Rinse-Aid indicator)

Adjusting Rinse Aid DispenserThe rinse aid dispenser has six or four settings. Always start with the dispenserset on "4". If spots and poor drying are a problem, increase the amount of rinseaid dispensed by removing the dispenser lid and rotating the dial to "5". If thedishes stil l are not drying properly or are show spots, adjust the dial to the nexthigher lever until your dishes are spot-free. The recommended setting is "4".(Factory value is "4".)

Increase the dose if there are drops of water or lime spots on the dishes after washing.Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware orknife blades.

during the next wash. Don't forget to replace the cap before you close dishwasher door.Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming

Detergents have chemical ingredients that are necessary to remove dirt, crush dirt and transport it out of the dishwasher.Most of the commercial quality detergents are suitable for this purpose.

DetergentsThere are 3 sorts of detergents1.With phosphate and with chlorine2.With phosphate and without chlorine3.Without phosphate and without chlorine

Detergent tablets of different brands dissolve at different speeds. For this reason somedetergent tablets cannot dissolve and develop their full cleaning power during shortprograms. Therefore please use long programs when using detergent tablets, toensure the complete removal of detergent residuals.

The dispenser must be refilled before the start of each wash cycle following the instructionsprovided in the wash cycle table . Your dishwasher uses less detergent and rinse aid thanConventional dishwasher. Generally, only one tablespoon of detergent is needed fora normal wash load. More heavily soiled items need more detergent. Always add thedetergent just before starting the dishwasher, otherwise it could get damp and will notdissolve properly.

Detergent Tablets

Detergent Dispenser

Normally new pulverised detergent is without phosphate. Thus the water softener function ofphosphate is not given. If detergents without phosphate are used in the case of hard wateroften white spots appear on dishes and glasses. In this case please add more detergent to reachbetter results. Detergents without chlorine do only bleach a little. Strong and coloured spots will notbe removed completely. In this case please choose a program with a higher temperature.

Based on their chemical composition, detergents can be split in two basic types:

Concentrated Detergent

Conventional, alkaline detergents with caustic components Low alkaline concentrated detergents with natural enzymes

The use of normal washing programs in combination with concentrated detergentsreduces pollution and is good for your dishes; these wash programs are specifically matchedto the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reasonnormal? wash programs in which concentrated detergents are used can achieve the sameresults that can otherwise only be achieved using intensive programs.

Adding detergent to dispenser

Proper Use of DetergentUse only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.Don't put powdered detergent into the dispenser until you're ready to wash dishes.

Dishwasher detergent is corrosive! Take care to keep it out of reach of children.

Always add the detergent just before starting each wash cycle.Only use branded detergent and rinse aid for dishwasher.

If the lid is closed: push the latch to open.

Fill the detergent dispenser with detergent.The marking indicates the dosing levels , asillustrated on the right:

Please observe the manufacturers dosing and storageRecommendations as stated on the detergent packaging.Close the lid and press until it locks in place.If the dishes are heavily soiled, place an additionaldetergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.

Fill in Detergent

You information about the amount of detergent for the single programme on page 8.will findPlease be aware that soiling levels and water hardness can effect wash results.Please observe the manufacturer's recommendations on the detergent packaging.

The place of main wash cycle detergent placed.The place of pre-wash cycle detergent placed.

AB

A B

Cutlery with wooden, horn china ormother-of-pearl handles.Plastic items that are not heat resistant.Older cutlery with glued parts that are nottemperature resistant.Bonded cutlery items or dishes.Pewter or cooper items.Crystal glass.Steel items subject to rusting.Wooden platters.Items made from synthetic fibres.

Some types of glasses can becomedull after a large number of washes.

Silver and aluminum parts have atendency to discolour during washing.

Glazed patterns may fade if machinewashed frequently.

Not suitable for use Limited suitability

Dishes and items of cutlery must not lie inside one another, or cover each other.To avoid damage to glasses, they must not be touched.Load large items which are most difficult to clean into the lower basket.The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffeeand tea cups.Long bladed knives stored in an upright position are a potential hazard!Long and/or sharp items of cutlery such as carving knives must be positionedhorizontally in the upper basket.Please do not overload your dishwasher. This is important for good results and forreasonable consumption of energy.

Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so thatwater cannot collect in the container or a deep base.

Consider buying utensils which are identified as dishwasher-proof.Use a mild detergent that is described as 'kind to dishes'. If necessary, seek furtherinformation from the detergent manufacturers.For particular items, select a program with as low temperature as possible.To prevent damage, do not take glass and cutlery out of the dishwasher immediatelyafter the program has ended.

(For the best performance of the dishwasher, follow these loading guidelines.Features and appearance of baskets and cutlery baskets may vary from your model.)

Scrape off any large food particles. Soften remnants of burnt food in pans.It is not necessary to rinse the dishes under running water.Place objects in the dishwasher in following way:1.Items such as cups, glasses, pots/pans, etc. are faced downwards.2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.3.All utensils are stacked securely and can not tip over.4.All utensils are placed in the way that the spray arms can rotate freely during washing.

Very small items should not be washed in the dishwasher as they could easily fall out of the basket.

To prevent water dripping from the upper basket into the lower basket, we recommend that you empty the lowerbasket first and then the upper basket.

Cutlery BasketCutlery should be placed into the cutlery rack separatelyfrom each other in the appropriate positions, and domake sure the utensils do not nest together, this maycause bad performance.

The upper basket is designed to hold more delicate andlighter dishware such as glasses, coffee and tea cupsand saucers, as well as plates, small bowls and shallowpans (as long as they are not too dirty).Position the dishes and cookware so that they will notget moved by the spray of water.

Loading the Upper BasketWe suggest that you place large items and the mostdifficult to clean items are to be placed into the lowerbasket: such as pots, pans, lids, serving dishes andbowls, as shown in the figure below. It is preferable toplace serving dishes and lids on the side of the racksin order to avoid blocking the rotation of the top sprayarm.

Loading the Lower Basket

Pots, serving bowls, etc, must always be placed top down.Deep pots should be slanted to allow water to flow out.

Please be reminded that:

The Bottom Basket features folding spikes so that larger or more pots and pans can be loaded.

The Method Loading Normal Dishware

Folding Spikes of Lower Basket

Adjusting the Upper Basket Folding back the cup shelvesThe height of the upper basket can be adjusted in orderto create more space for large utensils both for theupper/lower basket. The height of the upper basket canbe adjusted by placing the wheels on different height oftherails. Long items, serving cutlery, salad servers andknives should be placed on the shelf so that they do notobstruct the rotation of the spray arms.

For better stacking of pots and pans, the spikes can befolded down as show in the picture right.

For better stacking of pots and pans, the spikes can befolded down as show in the picture right.

Position one: lift the left basket up, both left and rightbaskets are slanting.

Position two: adjust the left basket to lower position, leftbasket is flat and right basket is slanting.

Position three: lift the right basket up, both left and rightbaskets are flat.

Position Four: Move the right basket from right to left, twobasket are overlapping.

Position Five: Remove the right basket from the tray,only has the left basket.

Mode 1

Mode 2

Mode 3

Mode 4

Mode 5

Cutlery tray could be have 5 positions:

Wash Cycle TableMeans: need to fill rinse aid into the Rinse-Aid Dispenser.( )

Turning On the ApplianceStarting a cycle wash

Draw out the lower and upper basket, load the dishes and push them back.It is load the lower basket first, then the upper one (see the section entitledLoading the Dishwasher).Pour in the detergent (see the section entitledSalt, Detergent and Rinse Aid).Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specificationof the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.Open the door, press the power button, and the On/Off light will turn on.Press the program Button, the wash program will be changed as follows direction:

If a program is selected, the response light will . Then close the door, press the start/pause button,

recommended to

turn onthe dishwasher will start its cycle.

Normal

1

23

45

->Glass->90Min->Rapid->Intensive->Heavy-> ;Normal

*AS/NZS 2007.1AS/NZS 2007.1

: This programme is the test cycle. The information for comparability testin accordance with , as follows:

Capacity: 14 settingsPosition Upper basket: upper wheels on railsRinse aid setting: 6PI:0.49w;Po:0.45w

90 Min

Intensive

Heavy For heavily soiled loads,such as pots, plates, glassesand lightly soiled pans.

For normally soiled loads,such as pots, plates, glassesand lightly soiled pans.standard daily cycle.

For heaviest soiled crockery,and normally soiled potspans dishes etc with driedon soiling.

、、

For normally soiled loadsthat need quick wash.

A shorter wash for lightlysoiled loads that do notneed drying.

For lightly soiled loads,such as glasses,crystal and fine china.

Rapid

Glass

(*AS/NZS 2007.1)

Pre-washwash(42 )RinseRinse(60 )Drying

125 0.8 13

(Or All in1)5/27.5g

5/27.5g(Or All in1)

(Or All in1)5/27.5g

Pre-wash(50 )Wash (60 )RinseRinseRinse(65 )Drying

Pre-wash(45 )Wash (55 )RinseRinse (65 )Drying

Pre-washWash (45 )Rinse(50 )Drying

Wash (40 )RinseRinse (45 )

160

170

170

30

1.3

0.7

1.5

0.6

17.5

13.5

12

11.5

Wash(65 )RinseRinse (65 )Drying

90 11.51.225g

25g

(Or All in1)5/27.5g

(Or All in1)

Normal

C。C。

C。

C。C。

C。

C。C。

C。

C。

C。

C。

C。

C。

9

When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn offthe appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while theyare still hot and more susceptible to breakage. They will also dry better.

Switch Off the DishwasherThe program light is on but is not blinking, only in this case the programme has ended.1.Switch off the dishwasher by pressing the ON/OFF button.2.Turn off the water tap!

Open the door carefully.Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutesbefore removing from the appliance.Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way theywill be cooler and the drying will be improved.

Unloading the dishwasherIt is normal that the dishwasher is wet inside.Empty the lower basket first and then the upper one. This will avoid water dripping from the upper basthe dishes in the lower one.

ket into

If you open the door during a wash cycle , the machine will pause. The program light willstop blinking and the buzzer will mooing every minute unless you close the door . Afteryou close the door ,the machine will keep on working after 10 seconds.

Premise:A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, thedetergent may have already been released, and the appliance may have already drained the wash water.If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading theDetergent " ).Press the Start/Pause button to stop the machine .Press the Program button more than3 seconds , the machine will be in standby state, then you can change the program to the desired cycle setting

(see the section entitled " Starting a wash cycle. . ." ).

1

2

A forgotten dish can be added any time before the detergent cup opens.

Add forgotten dishes.

Close the door

After the spray arms stop working, you can open the doorcompletely.

23

Open the door a little .1 45 The dishwasher will run after 10 seconds.

Wash the arms in soapy and warm water and use a soft brush toclean the jets. Replace them after rinsing them thoroughly.

When following this procedure from step1 to step 3, the filter system will be removed;when following it from Step 3 to Step 1, the filter system will be installed.It is dangerous to open the door when washing, because the hot water may scald you.

The filter prevents larger remnants of food or other objects from getting inside the pum.The residues may block the filter, in this case they must be removed.

The filter system consists of a coarse filter, a flat (Main filter)and a microfilter(Fine filter).

Food and soil particles trapped in this filter are pulverized by aspecial jet on the lower spray arm and washed down to drain.

Larger items, such as pieces of bones or glass, that could blockthe drain are trapped in the coarse filter. To remove the itemscaught by this filter, gently squeeze the tap on the top of thisfilter and lift it out.

This filter holds soil and food residues in the sump area andprevents it from being redeposit on the dishes during wash cycle.

Main filter 1

Coarse filter2

Fine filter 3

2

3

1

Filter assemblyThe filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle.For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea toremove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter andcup under running water. To remove the filter device, pull the cup handle in the upward direction.

The dishwasher must never be used without the filters.Improper replacement of the filter may reduce the performance level of the applianceand damage dishes and utensils.

Step 1 Turn the filter in anti-clockwise direction.：

Step 2 Lift the filter assy up.：

When following this procedure from step1 to step 2, the filter system will be removed;when following it from Step 2 to Step 1, the filter system will be installed.

1

2

The control panel can be cleaned by using a lightly dampened cloth.After cleaning, make sure to dry it thoroughly.For the exterior, use a good appliance polish wax.Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Protect Against Freezing

1.Cut off the electrical power to the dishwasher.2.Turn off the water supply and disconnect the water inlet pipe from the water valve.3.Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)4.Reconnect the water inlet pipe to the water valve.5.Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

please take frost protection measures on the dishwasher in winter. Every fter washing cycles,please operate as follows

time a?

Cleaning the Filter

Cleaning The Door

To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figureson the last page and reinsert the entire assembly in the dishwasher, positioning it in its seat and pressing downwards.

When cleaning the filters, don't knock on them. Otherwise, the filters could becontorted and the performance of the dishwasher could be decreased.

To clean the edge around the door, you should use only a soft warm, damp cloth.To avoid penetration of water into the door lock and electrical components, do notuse a spray cleaner of any kind.

Never use a spray cleaner to clean the door panel as it may damage the door lockand electrical components.Abrasive agents or some paper towels should not be used because of the risk ofscratching or leaving spots on the stainless steel surface.

Cleaning the Spray Arms

If your dishwasher cannot work because of the ice,please contact professional service persons.

It is necessary to clean the spray arms regularly for hardwater chemicals will clog the spray arm jets and bearings.

- Inspect the filters for blocking after every time the dishwasher has been used.- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and

clean the filters under running water.

Notes:

The entire filter assembly should be cleaned once a week.

To remove the lower spray arm, pull out the spray arm upward.

To remove the upper spray arm, hold the nut, rotate the armclockwise to remove it.

Wash the arms in soapy and warm water and use a soft brush toclean the jets. Replace them after rinsing them thoroughly.

12

It is recommend that you run a wash cycle with thedishwasher empty and then remove the plug from thesocket, turn off the water supply and leave the door ofthe appliance slightly open. This will help the doorseals to last longer and prevent odours from formingwithin the appliance.

If the appliance must be moved, try to keep it in thevertical position. If absolutely necessary, it can bepositioned on its back.

One of the factors that cause odours to form in thedishwasher is food that remains trapped in the seals.Periodic cleaning with a damp sponge will prevent thisfrom occurring.

Before cleaning or performing maintenance, alwaysremove the plug from the socket.

To clean the exterior and rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.Only use a cloth with warm soapy water.To remove spots or stains from the surface of theinterior, use a cloth dampened with water an a littlevinegar, or a cleaning product made specifically fordishwashers.

Remove the Plug

No Solvents or Abrasive CleaningMoving the Appliance

Seals

After every wash, turn off the water supply to theappliance and leave the door slightly open so thatmoisture and odours are not trapped inside.

After Every Wash When not in Use for a LongTime

The installation of the pipesand electrical equipmentsshould be done by professionals.

Electrical Shock HazardDisconnect electrical power beforeinstalling dishwasher.

Failure to do so can result in death orelectrical shock.

The installation position of dishwasher should be near the existing inlet and drain hoses andpower cord.One side of the cabinet sink should be chosen to facilitate the connection of drain hoses ofthe dishwasher.

Installation preparation

Note: please check the accompanying installation accessories(hook for aesthetic panel,screw)

●

13

Please carefully read the installation instruction.Illustrations of cabinet dimensions and installation position of the dishwasherPreparations should be made before moving the dishwasher to the installation place.Choose a place near the sink to facilitate the installation of inlet and drain hoses(see figure 1).If dishwasher is installed at the corner of the cabinet, there should be some space(illustrated in figure 2) when the door is opened.

21

Minimum space whenthe door is opened

【 】Figure2

Cabinet dimensions

【 】Figure1

Cabinet

Dishwasher

Door ofdishwasher

Minimum space of 50mm

● Aesthetic panel's dimensions and installation

Less than 5mmbetween the topof dishwasher andcabinet and theouter door alignedto cabinet.

90 ˇ 90 ˇ

600 mm

820mm

100

580mm

80

Space between cabinetbottom and floor

Electrical, drain andwater supply lineentrances

1 The aesthetic wooden panel could be processed according to the Figure 3.

The aesthetic panel shouldbe processed in accordancewith the illustrated dimensions

【 】Figure3

(Unit: mm)

14

Tension adjustmentof the door spring

【 】Figure5

Tension adjustment of the door spring●

Connection of drain hoses●

The door springs are set at the factory to the proper tension for the outer door.If aesthetic wooden panel are installed, you will have to adjust the door spring tension.Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable(see figure 5).

Door spring tension is correct whenthe door remains horizontal in thefully opened position yet risesto a close with the slight lift of afinger.

?

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure toavoid bending or crimping it. The top of the hose must be less than 1000mm.

A

CounterFront

Drain pipe

NOTEThe top of the hosemust be less than1000mm.

¦40mm

B

【 】Figure6

15

Dishwasher installation steps●

1

2

.3 .4 .5 .6

78

Install the furniture door to the outer door of the dishwasher using the brackets provided. Referto the template for positioning of the brackets.

Adjust the tension of the door springs by using an Allen key turning in a clockwise motion totighten the left and right door springs. Failure to do this could cause damage to your dishwasher(Illustration 2)

Connect the inlet hose to the cold water supplyConnect the drain hose. Refer to diagram (Figure 6)Connect the power cordAffix the condensation strip under the work surface of cabinet. Please ensure the condensation

strip is flush with edge of work surface.Place the dishwasher into position.(Illustration 4)Level the dishwasher. The rear food can be adjusted from the front of the dishwasher by turning

the Allen screw in the middle of the base of dishwasher use an Allen key (Illustration 5A). To adjustthe front feet, use a flat screw driver and turn the front feet until the dishwasher is level (Illustration 5B).9 The dishwasher must be secured in place. There are two ways to do this:A. Normal work surface:Put the installation hook into the slot of the side plane and secure it to the

work surface with the wood screws (Illustration 6).B. Marble or granite work top:Fix the side with Screw. (Illustration 7).

【Figure 7】

16

Dishwasher must be level for proper dish rack operation and wash performance.Place a spirit level on door and rack track inside the tub as shown to check that the

dishwasher is level.level the dishwasher by adjusting the three levelling legs individually.When level the dishwasher, please pay attention not to let the dishwasher tip over.

1

23

Illustration of feet adjustment

【 】Figure 8

NOTE:The maximum adjustmentheight of the feet is 50 mm.

Ensure the voltage and frequency of the power being corresponds tothose on the rating plate. Only insert the plug into an electrical socket which is earthedproperly. If the electrical socket to which the appliance must be connected is notappropriate for the plug , replace the socket, rather than using a adaptors or the like asthey could cause overheating and burns.

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit servingonly this appliance.

For personal safety:Do not use an extension cord or an adapter plug with this appliance.Do not, under any circumstances, cut or remove the earthing connectionfrom the power cord.

Check level side to side

Spirit level

Check level Front to Back

17

Positioning the Appliance

How to Drain Excess Water From HosesIf the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directlyinto the sink. It will be necessary to drain excess water from hoses into a bowl or suitablecontainer that is held outside and lower than the sink.

Water OutletConnect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.Ensure that the water inlet hose is not kinked or squashed.

The following things should be checked before starting the dishwasher.

Syphon ConnectionInsert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure toavoid bending or crimping it. The top of the hose must be less than 1000mm.

The content of this manual is very helpful to the users.After installation, please make sure to keep this manual.

Extension HoseIf you need a drain hose extension, make sure to use a similar drain hose.It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

1 The dishwasher is level and fixed properly2 The inlet valve is open3 Inlet hose connections are fully tightened and not leaking

4 The wires are tightly connected5 The power is switched on6 The inlet and drain hoses are knotted7 All packing materials and printings should be taken out from the dishwasher

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that canbe positioned either to the right or the left sides to facilitate proper installation.

Connect the cold water supply hose to a threaded 3/4(inch) connector and make surethat it is fastened tightly in place.If the water pipes are new or have not been used for an extended period of time, let thewater run to make sure that the water is clear. This precaution is needed to avoid therisk of the water inlet to be blocked and damage the appliance.

Please close the hydrant after using.

18

Fuse blown, or thecircuit breaker acted

Replace fuse or reset circuit breaker. Remove any otherappliances sharing the same circuit with the dishwasher

Spilled rinse-aid Always wipe up rinse-aid spills immediately.

Hard water minerals

The affected items arenot corrosion resistant.

A spray arm isknocking againstan item in a basket

Items of crockeryare loose in thewash cabinet

This may be causedby on-site installationor the cross-section ofthe piping.

To clean the interior, use a damp sponge withdishwasher detergent and wear rubber gloves.Never use any other cleaner than dishwasherdetergent for the risk of foaming or suds.

Interrupt the program, and rearrange the itemswhich are obstructing the spray arm.

Interrupt the program,and rearrange the items of crockery.

This has no influence on the dishwasher function.if in doubt, contact a suitably qualified plumber.

Detergent withcolourant was used

Make sure that the detergent is the one withoutcolourant.

Improper detergent

Make sure the dishwasher is turned on and the door isclosed securely.

Check that the water supply is connected properly andthe water is turned on.

Make sure to close the door properly and latch it.

Make sure the power cord is properly plugged into thewall socket.

Power supply is notturned on

Error code:E1;Water pressure is low

Door of dishwashernot properly closed.

Kink in drain hose

Filter clogged

Kitchen sink clogged

Check drain hose.

Check coarse the filter(see section titled " Cleaning The Filter ")

Check the kitchen sink to make sure it is draining well.If the problem is the kitchen sink not draining ,you mayneed a plumber rather than a serviceman for dishwashers.

Before Calling for Service

Technicalproblems

Generalproblems

Noise

Use only the special dishwasher detergent to avoid suds.If this occurred, open the dishwasher and let suds evaporate.Add 1 gallon of cold water to the tub. Close and latch thedishwasher, then select any cycle. Dishwasher will drainout the water at the first step. Open the door after drainingis stop and check if the suds is disappeared.Repeat if necessary.

The items should be corrosion resistant.

19

Error Codes

The dishes were notloaded correctly.

See notes in " Loading the Dishwasher Baskets ".

Select a more intensive programme.See" Wash Cycle Table ".

Use more detergent, or change your detergent.

Rearrange the items so that the sprayer can rotate freely.

Clean and/or fit the filter combination correctly.Clean the spray arm jets. See "Cleaning the SprayArms".

Use less detergent if you have soft water and selecta shortest cycle to wash the glassware and to getthem clean.Use a mild abrasive cleaner to eliminate those marks.

Re-loading the dishes properly.

Load the dishwasher as suggested in the directions.

Increase the amount of rinse-aid/refill the rinse-aiddispenser.

Do not empty your dishwasher immediately afterwashing. Open the door slightly so that the steam cancome out. Take out the dishes until the inside temperatureis safe to touch. Unload the lower basket first to preventthe dropping water from the upper basket.

In short program the rinse temperature is lower.This also lowers cleaning performance. Choosea program with a long high rinse temperature.Water drainage is more difficult with these items.Cutlery or dishes of this type are not suitable forwashing in the dishwasher.

The program wasnot powerful enough.

Not enough detergentwas dispensed.

Items are blockingthe path of spray arms.

The filter combinationis not clean oris not correctly fitted.This may causethe spray arm jetsget blocked.

Combination of softwater and too muchdetergent.

Aluminum utensilshave rubbed againstdishes.

Dishes blockdetergent cup opens.

Improper loading

Too little rinse-aid

Dishes are removedtoo soon

Wrong programhas been selected

Use of cutlery witha low-quality coating

Unsatis-factorywashingresult

Unsatis-factorydryingresult

When some malfunctions occur, the appliance will display error codes to warn you:

If overflow occurs, turn off the main water supply before calling a service.If there is water in the base pan because of an overfill or small leak,the water should be removed before restarting the dishwasher.

Overflow.

Longer inlet time. Faucets is not opened, or water intake isrestricted,or water pressure is too low.

Some element of dishwasher leaks .lem

Rapid

Glass

Failure of water diverter Open circuit or break of Water Diverter.ECO

Not reaching required temperature Malfunction of heating element.Rapid+Glass

20

Height : 815mmWidth : 598 mmDepth : 570mm(with the door closed)

Water pressure: 0.04-1.0MPaPower supply: see rating labelCapacity: 14 place settings

Technical Information