TIÊU CHUẨN MỚI THÁNG 7/2016

TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH

TRUNG TÂM THÔNG TIN – THƯ VIỆN

TIÊU CHUẨN MỚI THÁNG 7/2016

Mục lục

TIÊU CHUẨN QUỐC GIA (TCVN) .......................................................... 2

Công nghệ thông tin ............................................................................................... 2

Cơ khí – Chế tạo .................................................................................................... 2

TIÊU CHUẨN NƯỚC NGOÀI ................................................................... 3

Công nghệ thông tin .............................................................................................. 3

Viễn thông ............................................................................................................. 5

Giao thông – Vận tải – Tàu thủy ......................................................................... 5

Điện – Điện tử- Thiết bị điện ................................................................................. 6

Sơn và chất màu ................................................................................................... 10

Cơ khí – Chế tạo ................................................................................................... 11

Thực phẩm ............................................................................................................ 12

Luyện kim – Sản phẩm kim loại .......................................................................... 12

Xây dựng – Vật liệu xây dựng ............................................................................. 14

Khai thác mỏ và khoáng sản ................................................................................ 16

Chất lượng nước – Cấp nước............................................................................... 16

Chất dẻo – Cao su – Nhựa .................................................................................... 16

Dầu mỏ ................................................................................................................... 17

Gốm sứ - Thủy tinh ............................................................................................. 18

May mặc ................................................................................................................ 18

Nông nghiệp ........................................................................................................... 18

Y tế - Chăm sóc sức khỏe ..................................................................................... 19

An toàn – môi trường ........................................................................................... 20

Đo lường và phép đo, hiện tượng vật lý .............................................................. 21

Thử nghiệm .......................................................................................................... 21

Chi tiết

TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4

TIÊU CHUẨN QUỐC GIA (TCVN)

Công nghệ thông tin Trở về đầu trang

1 TCVN 11367-1:2016

Công nghệ thông tin. Các kỹ thuật an

toàn - thuật toán mật mã . Phần 1: Tổng

quan

25

2 TCVN 11367-2:2016


toàn - thuật toán mật mã . Phần 2: Mật

mã phi đối xứng

130

3 TCVN 11367-3:2016


toàn - thuật toán mật mã . Phần 3: Mã

khối

86

4 TCVN 11367-4:2016


toàn - thuật toán mật mã . Phần 4: Mã

dòng

123

Cơ khí – Chế tạo Trở về đầu trang

5 TCVN 6767-1:2016

Thay thế:TCVN 6767-1:2000

Giàn cố định trên biển. Phần 1: Phương

tiện cứu sinh

16

6 TCVN 6767-2:2016


Giàn cố định trên biển. Phần 2: Phòng,

phát hiện và chữa cháy

41

7 TCVN 6767-3:2016


Giàn cố định trên biển. Phần 3: Hệ thống

máy và hệ thống công nghệ

40

8 TCVN 6767-4:2016


Giàn cố định trên biển. Phần 4: Trang bị

điện

62

9 TCVN 5318:2016

Thay thế:TCVN 5318:2001 Giàn di động trên biển. Hàn

13

10 TCVN 5315:2016

Thay thế:TCVN 5315:2001 Giàn di động trên biển. Hệ thống máy

22

11 TCVN 5312:2016

Thay thế:TCVN 5312:2001 Giàn di động trên biển. Ổn định

17

12 TCVN 5309:2016

Thay thế:TCVN 5309:2001 Giàn di động trên biển. Phân cấp

40

13 TCVN 5313:2016

Thay thế:TCVN 5313:2001 Giàn di động trên biển. Phân khoang

9

14 TCVN 5314:2016

Thay thế:TCVN 5314:2001

Giàn di động trên biển. Phòng, phát hiện

và chữa cháy

24

15 TCVN 5310:2016

Thay thế:TCVN 5310:2001 Giàn di động trên biển. Thân giàn

30

16 TCVN 5319:2016

Thay thế:TCVN 5319:2001 Giàn di động trên biển. Trang bị an toàn

56

17 TCVN 5316:2016 Giàn di động trên biển. Trang bị điện 57

Thay thế:TCVN 5316:2001

18 TCVN 5311:2016

Thay thế:TCVN 5311:2001 Giàn di động trên biển. Trang thiết bị

110

19 TCVN 5317:2016

Thay thế:TCVN 5317:2001 Giàn di động trên biển. Vật liệu

19

TIÊU CHUẨN NƯỚC NGOÀI

Công nghệ thông tin Trở về đầu trang

20 BS ISO/IEC 23000-15:2016

Information technology. Multimedia

application format (MPEG-A).

Multimedia preservation application

format

82

21 ISO/IEC 23001-11:2015/Amd 1:2016 Carriage of green metadata in an HEVC

SEI message

3

22 ISO/IEC 13818-1:2015/Amd 3:2016 Carriage of green metadata in MPEG2

systems

5

23 ISO/IEC 13818-1:2015/Amd 2:2016 Carriage of layered HEVC 22

24 ISO/TS 13399-70:2016

Cutting tool data representation and

exchange -- Part 70: Graphical data

layout -- Layer setting for tool layout

49

25 ISO/TS 13399-71:2016


exchange -- Part 71: Graphical data

layout -- Creation of documents for

standardized data exchange: Graphical

product information

8

26 ISO/TS 13399-72:2016


exchange -- Part 72: Creation of

documents for the standardized data

exchange -- Definition of properties for

drawing header and their XML-data

exchange

21

27 ISO/TS 14907-2:2016 Replace: ISO/TS

14907-2:2011

Electronic fee collection -- Test

procedures for user and fixed equipment

-- Part 2: Conformance test for the on-

board unit application interface

75

28 ISO/IEC 10373-6:2016 Replace:

ISO/IEC 10373-6:2011

Identification cards -- Test methods --

Part 6: Proximity cards

340

29 ISO/IEC 17826:2016 Replace: ISO/IEC

17826:2012

Information technology - Cloud Data

Management Interface (CDMI)

259

30 ISO/IEC 17826:2016 Replace ISO/IEC

17826:2012

Information technology - Cloud Data

Management Interface (CDMI)

259


ISO/IEC 13818-1:2013

Information technology - Generic coding

of moving pictures and associated audio

information - Part 1: Systems

228


ISO/IEC 23005-1:2014

Information technology -- Media context

and control -- Part 1: Architecture

55

33 ISO/IEC 23005-1:2016 Replace: Information technology - Media context 55

http://shop.bsigroup.com/ProductDetail?pid=000000000030311730





http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=68657

http://www.iso.org/iso/











http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?csnumber=57381





https://webstore.iec.ch/publication/22802






ISO/IEC 23005-1:2014 and control - Part 1: Architecture


ISO/IEC 23005-3:2013

Information technology -- Media context

and control -- Part 3: Sensory

information

100


ISO/IEC 23005-3:2013

Information technology - Media context

and control - Part 3: Sensory information

100

36 ISO/IEC 23000-15:2016

Information technology -- Multimedia

application format (MPEG-A) -- Part 15:


format

69

37 ISO/IEC 23000-15:2016

Information technology - Multimedia

application format (MPEG-A) - Part 15:


format

69

38 ISO/IEC TS 33072:2016

Information technology -- Process

assessment -- Process capability

assessment model for information

security management

187

39 ISO/IEC TS 33072:2016

Information technology - Process

assessment - Process capability

assessment model for information

security management

187

40 ISO/IEC 18477-2:2016

Information technology -- Scalable

compression and coding of continuous-

tone still images -- Part 2: Coding of

high dynamic range images

18

41 ISO/IEC 18477-2:2016

Information technology - Scalable

compression and coding of continuous-

tone still images - Part 2: Coding of high

dynamic range images

18

42 ISO/IEC 18370-2:2016

Information technology -- Security

techniques -- Blind digital signatures --

Part 2: Discrete logarithm based

mechanisms

79

43 ISO/IEC 18370-2:2016

Information technology - Security

techniques - Blind digital signatures -

Part 2: Discrete logarithm based

mechanisms

79


ISO/IEC 15946-1:2008

Information technology -- Security

techniques -- Cryptographic techniques

based on elliptic curves -- Part 1:

General

31


ISO/IEC 15946-1:2008

Information technology - Security

techniques - Cryptographic techniques

based on elliptic curves - Part 1: General

31

46 ISO/IEC 13818-1:2015/Amd

1:2015/Cor 1:2016

Information technology — Generic

coding of moving pictures and

associated audio information — Part 1:

1


























Systems Amendment 1: Delivery of

timeline for external data

47 ISO 16700:2016 Replace: ISO

16700:2004

Microbeam analysis -- Scanning electron

microscopy -- Guidelines for calibrating

image magnification

18

48 ISO 21082:2016 Mission operations -- MAL space packet

transport binding and binary encoding

62

49 ISO 21077:2016 Space data and information transfer

systems -- Digital motion imagery

33

50 ISO 21080:2016

Space data and information transfer

systems -- Licklider transmission

protocol (LTP) for CCSDS

57

51 ISO 21076:2016

Space data and information transfer

systems -- Space communications cross

support -- Architecture requirements

document

146


27852:2011

Space systems -- Estimation of orbit

lifetime

43

53 PD ISO/TS 13399-70:2016


exchange. Graphical data layout. Layer

setting for tool layout

60

Viễn thông Trở về đầu trang

54 IEC 62820-1-1:2016 PRV Building intercom systems - Part 1-1:

System requirements – General

81

Giao thông – Vận tải – Tàu thủy Trở về đầu trang

55 BS EN 14504:2016 Replace: BS EN

14504:2009

Inland navigation vessels. Floating

landing stages and floating equipment on

inland waters. Requirements, tests.

32

56 BS ISO 10254:2016 Replace: BS M

83:1995, ISO 10254:1995

Air cargo and ground equipment.

Vocabulary.

60

57 BS ISO 16706:2016

Ships and marine technology. Marine

evacuation systems. Load calculations

and testing

18

58 ISO 20283-3:2006/Amd 1:2016

Mechanical vibration - Measurement of

vibration on ships - Part 3: Pre-

installation vibration measurement of

shipboard equipment - Amendment 1

2

59 ISO 7637-3:2016 Replace: ISO 7637-

3:2007

Road vehicles -- Electrical disturbances

from conduction and coupling -- Part 3:

Electrical transient transmission by

capacitive and inductive coupling via

lines other than supply lines

25


8666:2002 Small craft -- Principal data

23

61 ISO/TR 37152:2016

Smart community infrastructures --

Common framework for development

and operation

21



























Điện – Điện tử- Thiết bị điện Trở về đầu trang

62 BS EN 13160-1:2016 Replace: BS EN

13160-1:2003

Leak detection systems. General

Principles

26


13160-2:2003

Leak detection systems. Requirements

and test/assessment methods for pressure

and vacuum systems

70

64 BS EN 13160-6:2016 Leak detection systems. Sensors in

monitoring wells

12

65 BS EN 50628:2016 Erection of electrical installations in

underground mines

80

66 IEC 60062:2016 Replace: IEC

60062:2004

Marking codes for resistors and

capacitors

61

67 IEC 60086:2016 SER Replace: IEC

60086:1957 Primary batteries - ALL PARTS

475

68 IEC 60086-5:2016 RLV Replace: IEC

60086-5:2011

Primary batteries - Part 5: Safety of

batteries with aqueous electrolyte

116

69 IEC 60092-353:2016 PRV Replace:

IEC 60092-353:2011

Electrical installations in ships - Part

353: Power cables for rated voltages 1

kV and 3 kV

41

70 IEC 60092-504:2016 PRV Replace:

IEC 60092-504:2001/Cor 1: 2011

Electrical installations in ships - Part

504: Automation, control and

instrumentation

115

71 IEC 60154-2:2016 Replace: IEC

60154-2:1980/AMD1:1997

Flanges for waveguides - Part 2:

Relevant specifications for flanges for

ordinary rectangular waveguides

98

72

IEC 60238:2016 RLV Replace: IEC

60238:2004+AMD1:2008+AMD2:2011

CSV

Edison screw lampholders

240

73

IEC 60384-14:2013+AMD1:2016

CSV Replace: IEC 60384-

14:2013/AMD1:2016

Fixed capacitors for use in electronic

equipment - Part 14: Sectional

specification - Fixed capacitors for

electromagnetic interference suppression

and connection to the supply mains

281


60384-3:2006/COR1:2007

Fixed capacitors for use in electronic

equipment - Part 3: Sectional

specification - Surface mount fixed

tantalum electrolytic capacitors with

solid (MnO2) electrolyte

60

75 IEC 60695-1-21:2016 PRV Replace:

IEC TR 60695-1-21:2008

Fire hazard testing - Part 1-21: Guidance

for assessing the fire hazard of

electrotechnical products - Ignitability -

Summary and relevance of test methods

70

76

IEC 60851-4:2016 Replace: IEC

60851-

4:1996+AMD1:1997+AMD2:2005

CSV

Winding wires - Test methods - Part 4:

Chemical properties

37

77 IEC 60969:2016 PRV Replace: IEC Self-ballasted compact fluorescent lamps 67



















60969:1988+AMD1:1991+AMD2:2000

CSV

for general lighting services -

Performance requirements

78

IEC 61000-4-10:2016 RLV Replace:

IEC 61000-4-10:1993+AMD1:2000

CSV

Electromagnetic compatibility (EMC) -

Part 4-10: Testing and measurement

techniques - Damped oscillatory

magnetic field immunity test

143

79 IEC 61000-4-9:2016 RLV

Electromagnetic compatibility (EMC) -

Part 4-9: Testing and measurement

techniques - Impulse magnetic field

immunity test

181

80 IEC 61010-2-012:2016

Safety requirements for electrical

equipment for measurement, control, and

laboratory use - Part 2-012: Particular

requirements for climatic and

environmental testing and other

temperature conditioning equipment

174

81 IEC 61010-2-120:2016 PRV


equipment for measurement, control, and


safety requirements for machinery

aspects of equipment

65

82 IEC 61010-2-202:2016


equipment for measurement, control and


requirements for electrically operated

valve actuators

21

83 IEC 61169-54:2016 PRV

Radio-frequency connectors - Part 54:

Sectional specification for coaxial

connectors with 10 mm inner diameter of

outer conductor, nominal characteristic

impedance 50 Ω, series 4,3-10

34

84 IEC 61189-2-719:2016

Test methods for electrical materials,

printed boards and other interconnection

structures and assemblies - Part 2-719:

Test methods for materials for

interconnection structures - Relative

permittivity and loss tangent (500 MHz

to 10 GHz)

49

85 IEC 61189-5-1:2016

Test methods for electrical materials,

printed boards and other interconnection

structures and assemblies - Part 5-1:

General test methods for materials and

assemblies - Guidance for printed board

assemblies

53

86

IEC 61347-2-3:2011+AMD1:2016

CSV Replace: IEC 61347-2-

3:2011/COR1:2011

Lamp control gear - Part 2-3: Particular

requirements for a.c. and/or d.c. supplied

electronic control gear for fluorescent

lamps

177









87 IEC 61360-6:2016 PRV

Standard data element types with

associated classification scheme for

electric components - Part 6: IEC

Common Data Dictionary (IEC CDD)

quality guidelines

82

88 IEC 61754-32:2016 PRV

Fibre optic interconnecting devices and

passive components - Fibre optic

connector interfaces - Part 32: Type

DiaLink connector family

33

89 IEC 61784-3-13:2016 Replace: IEC

61784-3-13:2010

Industrial communication networks -

Profiles - Part 3-13: Functional safety

fieldbuses - Additional specifications for

CPF 13

391

90 IEC 61784-3-2:2016 Replace: IEC

61784-3-2:2010




CPF 2

584

91 IEC 61784-3-3:2016 Replace: IEC

61784-3-3:2010




CPF 3

302

92 IEC 62108:2016 PRV Replace: IEC

62108:2007

Concentrator photovoltaic (CPV)

modules and assemblies - Design

qualification and type approval

100


62209-1:2005

Measurement procedure for the

assessment of specific absorption rate of

human exposure to radio frequency

fields from hand-held and body-mounted

wireless communication devices - Part 1:

Devices used next to the ear (Frequency

range of 300 MHz to 6 GHz)

471

94 IEC 62424:2016

Representation of process control

engineering - Requests in P&I diagrams

and data exchange between P&ID tools

and PCE-CAE tools

344

95 IEC 62739-2:2016

Test method for erosion of wave

soldering equipment using molten lead-

free solder alloy - Part 2: Erosion test

method for metal materials with surface

processing

32

96 IEC 62788-1-5:2016

Measurement procedures for materials

used in photovoltaic modules - Part 1-5:

Encapsulants - Measurement of change

in linear dimensions of sheet

encapsulation material resulting from

applied thermal conditions

26

97 IEC 62803:2016 Transmitting equipment for

radiocommunication - Frquency

49













response of optical-to-electric conversion

device in high-frequency radio over fibre

systems - Measurement method

98 IEC 62917:2016 PRV

Railway applications - Fixed

installations - Electric traction - Copper

and copper alloy grooved contact wires

96

99 IEC 62952-1:2016 PRV

Power sources for a wireless

communication device - Part 1: General

requirements of power modules

28

100 IEC 62952-2:2016 PRV

Power sources for a wireless

communication device - Part 2: Profile

for power modules with batteries

17

101 IEC PAS 62264-6:2016 Enterprise-control system integration -

Part 6: Messaging Service Model

50

102 IEC TR 62935:2016 Measurement methods - High dynamic

range video

14

103 IEC TR 63038:2016 Conceptual model of standardization for

multimedia car systems and equipment

26

104 IEC TR 63039:2016

Probablistic risk analysis of

technological systems - Estimation of

final event rate at a given initial state

79

105

IEC TS 60479-1:2005+AMD1:2016

CSV Replace: IEC TS 60479-

1:2005/AMD1:2016

Effects of current on human beings and

livestock - Part 1: General aspects

135

106 IEC TS 61508-3-1:2016

Functional safety of

electrical/electronic/programmable

electronic safety-related systems - Part 3-

1: Software requirements - Reuse of pre-

existing software elements to implement

all or part of a safety function

10

107 IEC TS 62257-9-5:2016 RLV

Replace: IEC TS 62257-9-5:2013

Recommendations for renewable energy

and hybrid systems for rural

electrification - Part 9-5: Integrated

systems - Selection of stand-alone

lighting kits for rural electrification

652

108 IEC TS 62564-1:2016

Process management for avionics -

Aerospace qualified electronic

components (AQEC) - Part 1: Integrated

circuits and discrete semiconductors

18

109 IEC TS 62736:2016

Ultrasonics - Pulse-echo scanners -

Simple methods for periodic testing to

verify stability of an imaging system's

elementary performance

38

110 IEC TS 62840-1:2016 Electric vehicle battery swap system -

Part 1: General and guidance

27

111 PD IEC/TR 62691:2016

Replace: PD IEC/TR 62691:2011

Optical fibre cables. Guidelines to the

installation of optical fibre cables

50


http://shop.bsigroup.com/ProductDetail/?pid=000000000030231716


112 JIS Z 3284-1:2014 Replace:JIS Z

3284:1994

Solder paste -- Part 1: Kinds and quality

classification

11


3284:1994

Solder paste -- Part 2: Test methods for

solder particle shape, surface condition

judgment, and particle size distribution

12


3284:1994


printability, viscosity, slump and

tackiness

18


3284:1994


wettability, solderball and spread

27

116 ISO/PAS 19451-1:2016

Application of ISO 26262:2011-2012 to

semiconductors -- Part 1: Application of

concepts

123

117 ISO/PAS 19451-2:2016

Application of ISO 26262:2011-2012 to

semiconductors -- Part 2: Application of

hardware qualification

11

118 ISO 18582-1:2016

Fluid power -- Specification of reference

dictionary -- Part 1: General overview on

organization and structure

11

119 ISO 3601-2:2016 Replace: ISO 3601-

2:2008

Fluid power systems -- O-rings -- Part 2:

Housing dimensions for general

applications

54

Sơn và chất màu Trở về đầu trang

120 ASTM D2574-16 Replace: ASTM

D2574-06(2012)

Standard Test Method for Resistance of

Emulsion Paints in the Container to

Attack by Microorganisms

4

121 BS EN ISO 4629-1:2016

Binders for paints and varnishes.

Determination of hydroxyl value.

Titrimetric method without using a

catalyst

16

122 BS EN ISO 4629-2:2016

Binders for paints and varnishes.

Determination of hydroxyl value.

Titrimetric method using a catalyst

18


1514:2004

Paints and varnishes -- Standard panels

for testing

11


3248:1998

Paints and varnishes -- Determination of

the effect of heat

3

125 JIS K 5600-1-3:2015 Replace:JIS K

5600-1-3:1999

Testing methods for paints -- Part 1:

General rule -- Section 3: Examination

and preparation of samples for testing

6


5600-1-7:1999


General rule -- Section 7: Determination

of film thickness

37


5600-2-1:1999


Characteristics and stability of paints --

Section 1: Colour number (Visual

method)

10













5600-2-3:1999


Characteristics and stability of paints

Section 3: Viscosity (Corn and plate

methods)

7


5600-2-4:1999


Characteristics and stability of paints --

Section 4: Density

10


5600-5-11:1999


Mechanical property of film -- Section

11: Washability

14


5600-5-7:1999


Mechanical property of film -- Section 7:

Adhesion test (Pull-off methods)

12


5600-8-1:1999


Evaluation of degradation of paint

coatings -- Section 1: General principles

and rating schemes

7


5600-8-6:1999


Evaluation of degradation of paint

coatings -- Section 6: Rating of degree of

chalking

6

134 JIS K 6894:2014 Replace:JIS K

6894:1996

Testing methods for fluoroplastic coating

film on metal substrate

22

Cơ khí – Chế tạo Trở về đầu trang

135 ASTM D3241 -16a Replace: ASTM

D3241 -16

Standard Test Method for Thermal

Oxidation Stability of Aviation Turbine

Fuels

21


13616:2004

Overfill prevention devices for static

tanks for liquid fuels. Overfill prevention

devices without a closure device

42

137 BS EN 60034-27-3:2016

Rotating electrical machines. Dielectric

dissipation factor measurement on stator

winding insulation of rotating electrical

machines

32

138 BS EN ISO 4759-3:2016 Replace: BS

EN ISO 4759-3:2000

Tolerances for fasteners. Washers for

bolts, screws and nuts. Product grades A,

C and F

20

139 BS ISO 18740:2016 Turbocompressors. Performance test

code. Simplified acceptance test.

22


10254:1995

Air cargo and ground equipment --

Vocabulary

49

141

ISO 1161:2016 Replace: ISO

1161:1984; ISO 1161:1984/Amd

1:2007; ISO 1161:1984/Cor 1:1990

Series 1 freight containers -- Corner and

intermediate fittings -- Specifications

24

142

ISO 15540:2016 Replace: ISO

15540:1999; ISO 15540:1999/Cor

1:1999

Ships and marine technology -- Fire

resistance of non-metallic hose

assemblies and non-metallic

6





























compensators -- Test methods


15541:1999

Ships and marine technology -- Fire

resistance of non-metallic hose

assemblies and non-metallic

compensators -- Requirements for the

test bench

3

144 ISO 16706:2016

Ships and marine technology -- Marine

evacuation systems -- Load calculations

and testing

7

145 ISO 23551-10:2016

Safety and control devices for gas

burners and gas-burning appliances --

Particular requirements -- Part 10: Vent

valves

18


4118:2005

Air cargo -- Non-certified lower deck

containers -- Design and testing

37

147 ISO 9863-1:2016 Replace: ISO 9863-

1:2005

Geosynthetics -- Determination of

thickness at specified pressures -- Part 1:

Single layers

5

Thực phẩm Trở về đầu trang

148 BS EN 862:2016 Replace: BS EN

862:2005

Packaging. Child-resistant packaging.

Requirements and testing procedures for

non-reclosable packages for non-

pharmaceutical products

22


11702:2009

Animal and vegetable fats and oils --

Enzymatic determination of total sterols

content

8

150 ISO 18862:2016

Coffee and coffee products --

Determination of acrylamide -- Methods

using HPLC-MS/MS and GC-MS after

derivatization

19

151 PD ISO/TS 18614:2016

Packaging. Label material. Required

information for ordering and specifying

self-adhesive labels.

48

Luyện kim – Sản phẩm kim loại Trở về đầu trang

152 ASTM B327 -16 Replace: ASTM B327

-13a

Standard Specification for Master Alloys

Used in Making Zinc Die Casting Alloys

4

153 ASTM B418 -16 Replace:ASTM B418

-12

Standard Specification for Cast and

Wrought Galvanic Zinc Anodes

3


-09

Standard Specification for Copper-Clad

Stainless Steel Sheet and Strip for

Building Construction

5

155 ASTM B622 -15e1 Replace: ASTM

B622 -15

Standard Specification for Seamless

Nickel and Nickel-Cobalt Alloy Pipe and

Tube

6


-12 Standard Specification for GALFAN

3































-14

Standard Specification for Continuous

Galvanizing Grade (CGG) Zinc Alloys

for Hot-Dip Galvanizing of Sheet Steel

3


-14

Standard Specification for Zinc Master

Alloys for Use in Hot Dip Galvanizing

3


-13

Standard Specification for Zinc, Tin and

Cadmium Base Alloys Used as Solders

6


-13

Standard Specification for Zinc and Tin

Alloy Wire Used in Thermal Spraying

for Electronic Applications

4


-15

Standard Specification for Zinc-

Aluminum Alloys in Ingot Form for Hot-

Dip Coatings

3

162 ASTM D2859 -16 Replace: ASTM

D2859-15

Standard Test Method for Ignition

Characteristics of Finished Textile Floor

Covering Materials

4

163 ASTM D5448/D5448M -16 Replace:

ASTM D5448/D5448M-11

Standard Test Method for Inplane Shear

Properties of Hoop Wound Polymer

Matrix Composite Cylinders

13


ASTM D5449/D5449M-11

Standard Test Method for Transverse

Compressive Properties of Hoop Wound

Polymer Matrix Composite Cylinders

10


ASTM D5450/D5450M-12

Standard Test Method for Transverse

Tensile Properties of Hoop Wound

Polymer Matrix Composite Cylinders

9

166 ASTM F3020 -16

Performance Standard for Hand-Worn

Metal Detectors Used in Safety and

Security

13

167 BS EN 61249-2-43:2016

Materials for printed boards and other

interconnecting structures. Reinforced

base materials clad and unclad. Non-

halogenated epoxide cellulose

paper/woven E-glass reinforced laminate

sheets of defined flammability (vertical

burning test), copper-clad for lead-free

assembly

28

168 BS ISO 5832-1:2016 Replace: BS ISO

5832-1:2007

Implants for surgery. Metallic materials.

Wrought stainless steel

18


16656:2004

Hydraulic fluid power -- Single rod,

short-stroke cylinders with bores from

32 mm to 100 mm for use at 10 MPa

(100 bar) -- Mounting dimensions

5


3575:2011

Continuous hot-dip zinc-coated and zinc-

iron alloy-coated carbon steel sheet of

commercial and drawing qualities

16

171 ISO 5832-1:2016 Replace: ISO 5832-

1:2007; ISO 5832-1:2007/Cor 1:2008

Implants for surgery -- Metallic

materials -- Part 1: Wrought stainless

6

http://www.astm.org/DATABASE.CART/HISTORICAL/D2859-15.htm

http://www.astm.org/DATABASE.CART/HISTORICAL/D5448D5448M-11.htm





























steel

172 ISO 683-3:2016 Replace: ISO 683-

3:2014

Heat-treatable steels, alloy steels and

free-cutting steels -- Part 3: Case-

hardening steels

35

173 ISO 683-4:2016 Replace: ISO 683-

4:2014

Heat-treatable steels, alloy steels and

free-cutting steels -- Part 4: Free-cutting

steels

21

174 ISO/TR 16203:2016

Corrosion of metals and alloys --

Guidelines for the selection of methods

for particle-free erosion corrosion testing

in flowing liquids

8

175 JIS D 4103:2015 Replace:JIS D

4103:1998

Automobile parts -- Disc wheels --

Performance requirements and marking

17

176 JIS G 0551:2013 Steels -- Micrographic determinnation of

the apparent grain size

49

Xây dựng – Vật liệu xây dựng Trở về đầu trang


D6307-05(2010)

Standard Test Method for Asphalt

Content of Asphalt Mixture by Ignition

Method

5

178 ASTM C1763 -16 Replace: ASTM

C1763 -14

Standard Test Method for Water

Absorption by Immersion of Thermal

Insulation Materials

4

179 ASTM C476 -16 Replace: ASTM C476

-10

Standard Specification for Grout for

Masonry

3


D2121 -15

Standard Test Methods for Polymer

Content of Styrene Monomer

4


D3273-12e1

Standard Test Method for Resistance to

Growth of Mold on the Surface of

Interior Coatings in an Environmental

Chamber

8


D5882 -07 (2013)

Standard Test Method for Low Strain

Impact Integrity Testing of Deep

Foundations

6


D6507 -1

Standard Practice for Fiber

Reinforcement Orientation Codes for

Composite Materials

4


ASTM D6524-00(2011)

Standard Test Method for Measuring the

Resiliency of Turf Reinforcement Mats

(TRMs)

3


ASTM D6525/D6525M-14

Standard Test Method for Measuring

Nominal Thickness of Rolled Erosion

Control Products

4

186 ASTM D7178 -16e Replace: ASTM

D7178 -2016

Standard Practice for Determining the

Number of Constrictions

#x201c;m#x201d; of Non-Woven

Geotextiles as a Complementary

Filtration Property

5












http://www.astm.org/DATABASE.CART/HISTORICAL/D6307-05R10.htm

http://www.astm.org/DATABASE.CART/HISTORICAL/D3273-12E1.htm



187 ASTM D850 -16 Replace: ASTM D850

-11

Standard Test Method for Distillation of

Industrial Aromatic Hydrocarbons and

Related Materials

7

188 ASTM E3040 -16 Replace: ASTM

E3040-15

Standard Practice for Evaluation of

Instrumental Color Difference with a

Gray Scale

5


E647-15

Standard Test Method for Measurement

of Fatigue Crack Growth Rates

49

190 ASTM E84 -16 Replace: ASTM E84-

15

Standard Test Method for Surface

Burning Characteristics of Building

Materials

22


13501-2:2007+A1:2009

Fire classification of construction

products and building elements.

Classification using data from fire

resistance tests, excluding ventilation

services

84


13501-4:2007+A1:2009

Fire classification of construction

products and building elements.

Classification using data from fire

resistance tests on components of smoke

control systems

34


13914-2:2005

Design, preparation and application of

external rendering and internal

plastering. Internal plastering

42

194 BS EN 12697-16:2016 Bituminous mixtures. Test methods.

Abrasion by studded tyres

24

195

BS EN 12697-35:2016 Replace: BS EN

12697-35:2004

(Vật liệu xây dựng)

Bituminous mixtures. Test methods.

Laboratory mixing

28

196 BS ISO 14853:2016 Replace: BS ISO

14853:2005

Plastics. Determination of the ultimate

anaerobic biodegradation of plastic

materials in an aqueous system. Method

by measurement of biogas production.

40

197 BS ISO 16957:2016 Replace: BS EN

12697-16:2004

Measurement of apparent thermal

conductivity of wet porous building

materials by a periodic method.

32

198 IEC TS 61463:2016 Replace: IEC TS

61463:1996+AMD1:2000 CSV Bushings - Seismic qualification

40

199 ISO/TR 16822:2016

Building environment design -- List of

test procedures for heating, ventilating,

air-conditioning and domestic hot water

equipment related to energy efficiency

11

200 JIS A 1132:2014 Replace:JIS A

1132:2006

Method of making and curing concrete

specimens

27

201 JIS A 5430:2013 Replace:JIS A

5430:2008 Fiber reinforced cement boards

68

202 JIS H 8641:2007 Hot dip galvanized coatings 16

http://www.astm.org/DATABASE.CART/HISTORICAL/E3040-15.htm




















































203 JIS K 7015:2013 Replace:JIS K

7015:2009/AMD1 Pultruded fibre - reinforced plastics

18

204 JIS Z 3120:2014 Replace:JIS Z

3120:2009

Method and acceptance criteria of test

for gas pressure welded joint of steel

bars for concrete reinforcement

6

205 JIS Z 3881:2014 Replace:JIS Z

3881:2009

Standard qualification procedure for gas

pressure welding technique of steel bars

for concrete reinforcement

7

206 JIS Z 3882:2015

Standard qualification procedure for butt

welding technique of steel bars for

concrete reinforcement

5

207 PD CEN/TR 16949:2016 Replace: PD

CEN/TR 1317-6:2012

Road restraint system. Pedestrian

restraint system. Pedestrian parapets

54

Khai thác mỏ và khoáng sản Trở về đầu trang


D7430-16

Standard Practice for Mechanical

Sampling of Coal

45

209 BS ISO 16878:2016 Replace: DD ISO/TS

16878:2010

Iron ores. Determination of metallic

iron content. Iron(III) chloride

titrimetric method.

18

Chất lượng nước – Cấp nước Trở về đầu trang

210 ISO 17294-2:2016 Replace: ISO 17294-

2:2003

Water quality -- Application of

inductively coupled plasma mass

spectrometry (ICP-MS) -- Part 2:

Determination of selected elements

including uranium isotopes

31

Chất dẻo – Cao su – Nhựa Trở về đầu trang

211 ISO 9924-1:2016 Replace: ISO 9924-

1:2000

Rubber and rubber products --

Determination of the composition of

vulcanizates and uncured compounds

by thermogravimetry -- Part 1:

Butadiene, ethylene-propylene

copolymer and terpolymer, isobutene-

isoprene, isoprene and styrene-

butadiene rubbers

9

212 ISO 19246:2016

Rubber compounding ingredients --

Silica -- Oil absorption of precipitated

silica

14


D5406-93(2011)

Standard Practice for

Rubber#x2014;Calculation of

Producer's Process Performance

Indexes

3


D6085-97(2011)

Standard Practice for Sampling in

Rubber Testing#x2014;Terminology

and Basic Concepts

7


D5605-94(2011)

Standard Practice for Styrene-

Butadiene Rubber

(SBR)#x2014;Establishing Raw

2





















Mooney Viscosity Target Values


D4316-95(2010)

Standard Specification for Elastomeric

Water Bottles

2


D6977-04(2010)

Standard Specification for

Polychloroprene Examination Gloves

for Medical Application

4


D3579-77(2010)

Standard Specification for Rubber

Surgical Drainage Tubes, Penrose-

Type

3

219 BS ISO 249:2016 Replce: BS ISO

249:2014

Rubber, raw natural. Determination of

dirt content.

20

220 ASTM D945 -16 Replace: ASTM D945-

06(2012)

Standard Test Methods for Rubber

Properties in Compression or Shear

(Mechanical Oscillograph)

13

221 ISO 9924-2:2016 Replace: ISO 9924-

2:2000; ISO 9924-2:2000/Amd 1:2012

Rubber and rubber products --

Determination of the composition of

vulcanizates and uncured compounds

by thermogravimetry -- Part 2:

Acrylonitrile-butadiene and halobutyl

rubbers

10


14853:2005

Plastics -- Determination of the

ultimate anaerobic biodegradation of

plastic materials in an aqueous system

-- Method by measurement of biogas

production

28

223 ISO 4590:2016 Replace: ISO 4590:2002

Rigid cellular plastics -- Determination

of the volume percentage of open cells

and of closed cells

22


D3484 -06(2010)

Standard Test Methods for

Rubber#x2014;Evaluation of Oil-

Extended Solution BR (Polybutadiene

Rubber)

5


D3896-07(2011)

Standard Practice for Rubber From

Synthetic Sources#x2014;Sampling

2


D3958 -06(2011)

Standard Test Methods for

Rubber#x2014;Evaluation of BIIR and

CIIR (Halogenated

Isobutene#x2014;Isoprene Rubber)

5

Dầu mỏ Trở về đầu trang


D1321 -16

Standard Test Method for Needle

Penetration of Petroleum Waxes

5


D3235 -15

Standard Test Method for Solvent

Extractables in Petroleum

7


D7223-16

Standard Specification for Aviation

Certification Turbine Fuel

7

230 ASTM D852 -16 Replace: ASTM D852 -

13

Standard Test Method for

Solidification Point of Benzene

4
























231 ISO 19901-4:2016 Replace: ISO 19901-

4:2003

Petroleum and natural gas industries --

Specific requirements for offshore

structures -- Part 4: Geotechnical and

foundation design considerations

191

232 PD ISO/TS 19880-1:2016 Gaseous hydrogen. Fuelling stations.

General requirements

134

Gốm sứ - Thủy tinh Trở về đầu trang


20808:2004

Fine ceramics (advanced ceramics,

advanced technical ceramics) --

Determination of friction and wear

characteristics of monolithic ceramics

by ball-on-disc method

11

234 ISO 18071:2016


advanced technical ceramics) --

Determination of antiviral activity of

semiconducting photocatalytic

materials under indoor lighting

environment -- Test method using

bacteriophage Q-beta

15

235 BS EN ISO 20504:2016 Replace; BS EN

658-2:2002


advanced technical ceramics). Test

method for compressive behaviour of

continuous fibre-reinforced composites

at room temperature.

32

May mặc Trở về đầu trang


D737:2004(2012)

Standard Test Method for Air

Permeability of Textile Fabrics

4

237 ASTM D76/D76M -16 Replace: ASTM

D76/D76M -11

Standard Specification for Tensile

Testing Machines for Textiles

7

238 BS EN ISO 105-D02:2016 Replace: BS

EN ISO 105-D02:1996

Textiles. Tests for colour fastness.

Colour fastness to rubbing: Organic

solvents

12

239 ISO 18825-1:2016

Clothing -- Digital fittings -- Part 1:

Vocabulary and terminology used for

the virtual human body

14

240 ISO 18825-2:2016

Clothing -- Digital fittings -- Part 2:

Vocabulary and terminology used for

attributes of the virtual human body

25

241 BS ISO 18825-2:2016

Clothing. Digital fittings. Vocabulary

and terminology used for attributes of

the virtual human body

56

242 JIS L 4129:2015

Safety of children's clothing -- Cords

and drawstrings on children's clothing

-- Specifications

25

Nông nghiệp Trở về đầu trang

243 BS EN 14984:2016 Replace: BS EN Liming materials. Determination of 36







































14984:2006 product effect on soil pH. Soil

incubation method.

244 BS ISO 18763:2016

Soil quality. Determination of the

toxic effects of pollutants on

germination and early growth of higher

plants.

34

245 ISO 15959:2016 Fertilizers -- Determination of

extracted phosphorus

9

246 BS ISO 18642:2016

Fertilizer and soil conditioners.

Fertilizer grade urea. General

requirements.

16

247 ISO 18642:2016

Fertilizer and soil conditioners --

Fertilizer grade urea -- General

requirements

5

Y tế - Chăm sóc sức khỏe Trở về đầu trang

248 BS EN ISO 11073-10419:2016

Health informatics. Personal health

device communication. Device

specialization. Insulin pump

144

249 BS EN ISO 11073-10425:2016

Health informatics. Personal health

device communication. Device

specialization. Continuous glucose

monitor (CGM)

84

250 BS ISO 7206-13:2016

Implants for surgery. Partial and total

hip joint prostheses. Determination of

resistance to torque of head fixation of

stemmed femoral components

18

251 IEC 62366-1:2015/Cor 1:2016

Medical devices — Part 1: Application

of usability engineering to medical

devices TECHNICAL

CORRIGENDUM 1

1

252 ISO 17254:2016 Dentistry -- Coiled springs for use in

orthodontics

6

253 ISO 13078-2:2016

Dentistry -- Dental furnace -- Part 2:

Test method for evaluation of furnace

programme via firing glaze

9

254 ISO/TS 22911:2016 Replace: ISO/TS

22911:2005

Dentistry -- Preclinical evaluation of

dental implant systems -- Animal test

methods

7


27799:2008

Health informatics -- Information

security management in health using

ISO/IEC 27002

99

256 ISO/IEEE 11073-20601:2016 Replace:

ISO/IEEE 11073-20601:2010

Health informatics -- Personal health

device communication -- Part 20601:

Application profile -- Optimized

exchange protocol

237

257 ISO/IEEE 11073-20601:2016/Cor 1:2016 Health informatics — Personal health

device communication — Part 20601:

9







































Application profile — Optimized

exchange protocol technical

corrigendum 1

258 ISO 16063-1:1998/Amd 1:2016

Methods for the calibration of

vibration and shock transducers - Part

1: Basic concepts

1

259 ISO 80369-3:2016

Small-bore connectors for liquids and

gases in healthcare applications -- Part

3: Connectors for enteral applications

39

260 ISO 80369-3:2016

Small-bore connectors for liquids and

gases in healthcare applications -- Part

3: Connectors for enteral applications

39

261 ISO 15858:2016 UV-C Devices -- Safety information --

Permissible human exposure

7

262 JIS T 3226-1:2015 Replace:JIS T 3226-

1:2011

Needle-based injection systems for

medical use -- Part 1: Needle-based

injection systems -- Requirements and

test methods

45

263 JIS T 3226-2:2015 Replace:JIS T 3226-

2:2011

Needle-based injection systems for

medical use -- Part 2: Needles --

Requirements and test methods

21

264 PD CEN ISO/TS 20440:2016

Health informatics. Identification of

medicinal products. Implementation

guide for ISO 11239 data elements and

structures for the unique identification

and exchange of regulated information

on pharmaceutical dose forms, units of

presentation, routes of administration

and packaging.

54

An toàn – môi trường Trở về đầu trang


E1776-13

Standard Guide for Development of

Fire-Risk-Assessment Standards

6


9022-1:2012

Optics and photonics. Environmental

test methods. Definitions, extent of

testing

18


10110-11:1996

Optics and photonics. Preparation of

drawings for optical elements and

systems. Non-toleranced data

14


10110-9:1996

Optics and photonics. Preparation of


systems. Surface treatment and coating

20

269 ISO/PAS 20065:2016

Acoustics -- Objective method for

assessing the audibility of tones in

noise -- Engineering method

33

270 ISO 7076-4:2016

Fire protection -- Foam fire

extinguishing systems -- Part 4: High

expansion foam equipment

11







































271 ISO/TR 13571-2:2016

Life-threatening components of fire --

Part 2: Methodology and examples of

tenability assessment

86

272 ISO 37101:2016

Sustainable development in

communities -- Management system

for sustainable development --

Requirements with guidance for use

32

273 ISO 9022-1:2016 Replace: ISO 9022-

1:2012

Optics and photonics -- Environmental

test methods -- Part 1: Definitions,

extent of testing

7

274 ISO 9022-23:2016 Replace: ISO 9022-

23:2013

Optics and photonics -- Environmental

test methods -- Part 23: Low pressure

combined with cold, ambient

temperature and dry or damp heat

13

275 ISO 10110-11:2016 Replace: ISO 10110-

11:1996; ISO 10110-11:1996/Cor 1:2006

Optics and photonics -- Preparation of


systems -- Part 11: Non-toleranced

data

3

276 ISO 10110-9:2016 Replace:ISO 10110-

9:1996

Optics and photonics -- Preparation of


systems -- Part 9: Surface treatment

and coating

9

Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang


D5900-15c

Standard Specification for Physical

and Chemical Properties of Industry

Reference Materials (IRM)

5


E2374-15

Standard Guide for Acoustic Emission

System Performance Verification

5

279 BS EN 1794-3:2016

Road traffic noise reducing devices.

Non-acoustic performance. Reaction to

fire. Burning behaviour of noise

reducing devices and classification

18

280 BS EN 62702-1-1:2016

Audio Archive System. DVD disk and

data migration for long term audio data

storage

30

281 ISO 389-7:2005/Amd 1:2016

Reference threshold of hearing at 20

Hz and 18 000 Hz under free-field

listening conditions and at 20 Hz under

diffuse-field listening conditions

2

282 ISO/IEC 23008-3:2015/Amd 1:2016 MPEG-H, 3D audio profile and levels 4

Thử nghiệm Trở về đầu trang

283 ASTM E2688-16 Replace: ASTM E2688-

10

Standard Practice for Specimen

Preparation and Mounting of Tapes to

Assess Surface Burning Characteristics

2

284 ASTM E3062 -16 Standard Specification for Indoor

Ballistic Test Ranges for Small Arms

4




















http://www.astm.org/DATABASE.CART/HISTORICAL/D5900-15C.htm

















and Fragmentation Testing of

Ballistic-resistant Items

285 ASTM D847 -16 Replace: ASTM D847 -

15

Standard Test Method for Acidity of

Benzene, Toluene, Xylenes, Solvent

Naphthas, and Similar Industrial

Aromatic Hydrocarbons

3


D7215-08(2013)

Standard Test Method for Calculated

Flash Point from Simulated

Distillation Analysis of Distillate Fuels

4


D7724 -11

Standard Test Method for Carbon

Black#x2014;Non-Dispersible Matter

by Mechanical Flushing (NDM)

3


D4527-99(2011)

Standard Test Method for Carbon

Black#x2014;Solvent Extractables

3


D7945-15


Determination of Dynamic Viscosity

and Derived Kinematic Viscosity of

Liquids by Constant Pressure

Viscometer

6


D7183-15


Determination of Total Sulfur in

Aromatic Hydrocarbons and Related

Chemicals by Ultraviolet Fluorescence

5


ASTM D6575-14a

Standard Test Method for Determining

Stiffness of Geosynthetics Used as

Turf Reinforcement Mats (TRMs)

4

292 ISO/TS 19006:2016 (Xem lại)

Nanotechnologies -- 5-(and 6)-

Chloromethyl-2¿,7¿ Dichloro-

dihydrofluorescein diacetate (CM-

H2DCF-DA) assay for evaluating

nanoparticle-induced intracellular

reactive oxygen species (ROS)

production in RAW 264.7 macrophage

cell line

21

293 ISO 18211:2016

Non-destructive testing -- Long-range

inspection of above-ground pipelines

and plant piping using guided wave

testing with axial propagation

15

294 ISO 18740:2016 Turbocompressors -- Performance test

code -- Simplified acceptance test

11

295 PD IEC/TR 63039:2016

Probabilistic risk analysis of

technological systems. Estimation of

final event rate at a given initial state.

84

Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa

học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong




http://www.astm.org/DATABASE.CART/HISTORICAL/D6575-14A.htm










trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông

tin, xin vui lòng liên hệ:

1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện

sau:

+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";

+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;

+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:

[email protected]

2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM

Địa chỉ: 79 Trương Định - Q1 - TP.HCM

ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957

Website: www.cesti.gov.vn Email: [email protected]

Lưu ý

1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.

2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)

Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.

http://lib.iuh.edu.vn/

http://facebook.com/libiuh

mailto:[email protected]

http://www.cesti.gov.vn/

mailto:[email protected]

Date post:	03-Mar-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

TIÊU CHUẨN MỚI THÁNG 7/2016

Documents