Page 1 of 5
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
Product Name: VK-2107
Process: Colossus 8-Color
Material: Poly Knit 9
Effective Date: 09/20/13
.75"
1”w x 3/8”h notchon center of top and bottom and 4 corners
Finished Size: 91"w x 81.75”hLive Area: 90”w x 80.25”h
Sew 1/2” hook Velcro into front perimeter
Finished Size: 25.5”w x 81.75”hLive Area: 24”w x 80.25”h
Sew 1/2” hook Velcro into front perimeter
3/8”w x 2.5”h notchon left and right side
Approx
81.7
5"
91 .00"
90 .00"
80.2
5"
.50"
39.25"
Sacagawea Backwall Graphic Dims VK-2107
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
Backwall Large Section Graphic (Included)Banner Section Graphic (Included)Backwall Tension Fabric Graphic (Included)
2 5.5 0"
2 4.0 0"
81.7
5"
80.2
5"
39.25"
1”w x 3/8”h notchon center of top and bottom and 4 corners
Finished Size: 91"w x 81.75”hLive Area: 90”w x 80.25”h
Sew 1/2” hook Velcro into front perimeter
81.7
5"
91 .00"
90 .00"
80.2
5"
.50"
39.25"Add 1/2” bleed to left and rightand 3/4” bleed to top and bottom
Add 1/2” bleed to left and rightand 3/4” bleed to top and bottom
Page 2 of 5
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
7.75
"
9 1.0 0"
11 .00"
56.5
0"
22”Monitor
Approx. Dims 20.5”w x 16”h
*
81.7
5"
.
32.5
0"
11 .88 "
6.00"
*Counter
25.00"
Blue Area indicates 3/4” bleed areaaround the counter and the monitor
Product Name: VK-2107
Process: Colossus 8-Color
Material: Poly Knit 9
Effective Date: 09/20/13
Sacagawea Backwall Accessories (Counter/Monitor)
"
7.75
"
9 1.0 0"
11 .00"
56.5
0"
22”Monitor
Approx. Dims 20.5”w x 16”h
*
81.7
5"
.
32.5
0"11 .88 "
6.00"
*Counter
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
*NOTE: When adding Monitors and Counters to the Sacagawea unit, portions of the graphic will be covered. Please design graphic layout according to suggested locations.-See Header Graphic Dims for header locations.
Page 3 of 5
Product Name: VK-2107
Process: See Below
Material: See Below
Effective Date: 09/20/13
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
Sacagawea Serpentine Canopy Structure Dims VK-2107
Single Sided: NODouble Sided: YES
Fabric Option
Print/Cut Size
Final Size
Zipper Length
117" (w) X 38" (h)116.5" (w) X 37.5" (h)
116" (w) X 19" (h)115.5" (w) X 18.75" (h)
115.5"115.5"
Knit 9Unprinted Twill
Sewing Instructions:
Zipper sewn across top.Seam sides using a 1/2" seam. Test hang on frame.
Product Name: VK-2107
Process: Direct Print
Material: 1/8” Sintra or Plex
Effective Date: 09/20/13
NOTE: Graphic files must be @ 150 dpi Finished Size.DO NOT send Flattened Files. Production can not manipulatethe content, proportion or color of these files.
NOTE: These dimensions are for graphic layout purposes.Graphic needs to be cut and test fitted to Sacagawea frame.
A small portion of your graphic(s) may be hidden by monitor and counter. Please use these diagrams to position your graphics correctly.
Sacagawea Wing Dims VK-2107
*Counter
6.0"
22”Monitor
Approx. Dims 20.5”w x 16”h
*
11.88 "
32.5
0"
4 .75"
40"
40"
13 "
Convex Wing for T-Series20’ Unit includes (2) Bottom Panels and (2) Upper Panels
Rad: 83.1738"Sweep: 28.746°Arc Len: 41.7287"
Bac
kwal
l Gra
phic
6.5"
17.5
"16
"
40"
13 "
"
40"
9 .75"
Bac
kwal
l Gra
phic
Page 5 of 5
