204204
UN
IOR ergonomics - protect y
our han
ds
Workshop equipment
Workbenches Tool chestsTool carriages
Tool boxes Tool cabinets Wardrobe cabinets
Clear tool storageWith its clear tool storage and
easy accessibility, Unior workshop
equipment helps you keep your
workshop in order and thereby
increases your productivity.
Innovative designA comprehensive knowledge of
all the work requirements of local
professionals has resulted in editions
of workshop equipment able to offer
great accessibility, clear tool storage
and improved visibility at any moment.
Quality sheet steelTool carriages, chests, cabinets and
various boxes for tool storage, as
well as work benches, stands, hooks
and other accessories are all made of
quality sheet steel. Lacquer coated
to resist corrosion and scratches, the
equipment is practically indestructible.
Paper holderPaper holder, available in two versions, ensures that paper is always close at hand (920 ES4A, 619445).
Tool rack wallA perforated sheet metal tool rack wall for hanging tools and other accessories can be attached to the EuroPLUS car-riage (920.1, 619711).
Tool traysPlastic (965) or SOS* (964) tool trays from polyethylene foam will keep your tools well ordered and protected from damage.
*SOS = Safety Order Survey
PartitionsEuroPLUS carriage drawers can be divided freely into different sized parts by installing partitions (920 ES3, 617823).
Accessories
ANTI-SLIP covering offers damage protection for the drawer, as it prevents tools from sliding during opening and
closing of the drawer.
Drawer closing mechanism prevents unwanted opening of drawers.
Durable 125 mm diameter wheels with a safety brake enable mobility and
stability, even if rolled fully loaded over a cable. Proper rolling stability is very useful
especially on uneven workshop floors or in the yard.
New 400 mm ball-bearing slides are of higher quality compared to standard models. This means load capacity increased by 10%, while the drawer still runs smoothly and almost inaudibly. Drawers
can be taken out easily – with a simple push of the plastic safety buttons.
Dimensions: Carriage: 810 x 510 x 945 mmLarge drawer: 565 x 385 x 150 mmSmall drawer: 565 x 365 x 70 mm
Capacity:Drawer: 40 kgStatic load capacity without wheels: 2000 kg
Pull-out shelf (290 x 350 mm) can be used to support docu-ments or other items. When not needed it can be simply pushed back in. Load capacity is 10 kg.
Material: • Perforated sheet metal • Drawers with ball-bearing slides • The syntetic covering protect drawers and tools from damage • Locking system • Protective closing mechanism of drawers • Multi-purpose shelf • ANTI-SHOCK rubbers • Ecological lacquered with cadmium and lead free colour • Wheels dia. 125 mm, for improved agility and stability
Features of Unior’s EuroPLUS tool carriage
Carriage corners are strengthened by ANTI-SHOCK rubber protectors, protecting the carriage and the environ-ment from damage.
Side walls have waste basket.
40 kg
10 kg
206
• ENG
A B H
601907 450 215 130
911/1
Tool box - 1 compartment • ecological lacquered with cadmium and lead free colour • short type with one handle
A B H
601909 450 215 240
911/5
Tool box - 5 compartments • ecological lacquered with cadmium and lead free colour • short type with one handle
B L H
615451 100 445 43
911N
Tool tray for sockets for tool box 911 • material polystyrene
619470$ 911N6P21 10 - 32 / 21
190/1 6p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32), 190.1/1ABI (1/2”), 190.4/1 (125), 190.6/2 (1/2”), 911N
911N6P21
Socket set 1/2”in tool tray 911N
619471$ 911N12P21 10 - 32 / 21
190/1 12p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32), 190.1/1ABI (1/2”), 190.4/1 (125), 190.6/2 (1/2”), 911N
911N12P21
Socket set 1/2”in tool tray 911N
B L H
615448 100 445 43
911V
Tray for tool box 911 • material polystyrene
A B H
601910 550 215 130
912/1
Tool box - 1 compartment • ecological lacquered with cadmium and lead free colour • long type with one handle
A B H
601911 550 215 202
912/3
Tool box - 3 compartments • ecological lacquered with cadmium and lead free colour • long type with one handle
A B H
601912 550 215 240
912/5
Tool box - 5 compartments • ecological lacquered with cadmium and lead free colour • long type with one handle
B L H
615452 100 545 43
912N
Tray for sockets for tool box 912 • material polystyrene
619472$ 912N6P21 10 - 32 / 21
190/1 6p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32), 190.1/1ABI (1/2”), 190.4/1 (125), 190.6/2 (1/2”), 912N
912N6P21
Socket set 1/2” in tool tray 912N
619473$ 912N12P21 10 - 32 / 21
190/1 12p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32), 190.1/1ABI (1/2”), 190.4/1 (125), 190.6/2 (1/2”), 912N
912N12P21
Socket set 1/2” in tool tray 912N
207
B L H
615449 100 545 43
912V
Tray for tool box 912 • material polystyrene
A B H
608538 450 200 202
914/3
Tool box - 3 compartments • ecological lacquered with cadmium and lead free colour • short type with two handles
A B H
601985 450 200 260
914/5
Tool box - 5 compartments • ecological lacquered with cadmium and lead free colour • short type with two handles
A B H
607137 550 200 260
915/5
Tool box - 5 compartments • ecological lacquered with cadmium and lead free colour • long type with two handles
A B H
619765 A 514 280 260
619766 B 406 252 244
619767 C 394 215 195
917
Plastic tool box
A B H
607946 460 310 700
918
Support • for transporting and lifting of tool boxes 912/5 • max lift 700 mm
A B H
617100 945 510 930
920PLUS1
Tool carriage Europlus • locking system • uniform closing mechanism of drawers with closing hooks • multi - purpose shelf enables additional working place • new wheels dia. 125 mm, for improved agility and stability • anti - shock rubbers • material: sheet metal • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • 8 drawers (seven dimensions 565x365x70 mm, one
dimension 565x385x150 mm) • static load capacity of carriages without wheels: 2000 kg • capacity of drawers: 40 kg • ecological lacquered with cadmium and lead free colour
A B H
617101 810 510 945
920PLUS2
Tool carriage Europlus • locking system • uniform closing mechanism of drawers with closing hooks • multi - purpose shelf enables additional working place • new wheels dia. 125 mm, for improved agility and stability • anti - shock rubbers • material: sheet metal • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • 7 drawers (five dimensions 565x365x70 mm, two
dimensions 565x385x150 mm) • static load capacity of carriages without wheels: 2000 kg • capacity of drawers: 40 kg • ecological lacquered with cadmium and lead free colour
617823
920ES3
Partitions set- 4 pieces for 920PLUS • for art. 920 PLUS
619446
920ES4A
Paper holder - maxi roll • from metal • delivery without hand towels
208
• ENG
A B H
621019$ 267 90 85
920ES7
Holder for bottles for carriages Europlus • material: sheet metal
A B H
619525 965 510 40
920ES8
ABS plate • material polystyrene
A B H
619711$ 577 75 1235
920.1PLUS
Tool rack wall • a perforated sheet metal tool rack wall for hanging
tools and other accessories can be attached to the EuroPLUS carriage
601996 930 80
1000K, 912/5
930
Tool set 82 pcs with tool box 912/5
601995 931 113
1000G, 912/5
931
Tool set 112 pcs with tools box 912/5
601994 932 131
1000E, 912/5
932
Tool set 137 pcs with tool box 912/5
A B H
615179 695 435 455
938/3V
Tool chest - 3 compartments • locking system • cover with lock, when the cover is closed the drawers
will be locked • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 3 drawers (two dimension 563x365x70 mm, one
dimension 563x400x150 mm) • material: sheet metal • capacity of drawers: 30 kg
A B H
612497 685 300 615
938/5E
Tool chest - 5 compartments • locking system • cover with lock, when the cover is closed the drawers
will be locked • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 5 drawers (four dimensions 570x265x70 mm and 1
dimension 570x280x150 mm) • material: sheet metal • capacity of drawers: 30 kg
209
A B H
612901 695 300 615
938/5M
Mobile tool chest with handle • locking system • cover with lock, when the cover is closed the drawers
will be locked • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 5 drawers (four dimensions 570x265x70 mm and
1 dimension 570x280x150 mm) • 4 wheels, one with brake • material: sheet metal • capacity of drawers: 30 kg
A B H
618662 695 435 615
938/5V
Tool chest - 5 compartments • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 5 drawers (four dimension 563x365x70 mm, one
dimension 563x400x150 mm) • material: sheet metal • capacity of drawers: 30 kg
A B H
620556$ 690 355 394
939/3EV
Tool chest Eurovision - 3 compartments • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 3 drawers (two dimension 560x275x70 mm, one
dimension 560x315x150 mm) • material: sheet metal • capacity of drawers: 30 kg
A B H
620420$ 690 355 394
939/4EV
Tool chest Eurovision - 4 compartments • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 4 drawers, dimension 560x275x70 mm • material: sheet metal • capacity of drawers: 30 kg
621400$
939EVS3
Partitions set - 3 pieces for Eurovision tool chest • material: sheet metal
A B H
611784 685 300 535
939/5E
Tool chest - 5 compartments • locking system • cover with lock, when the cover is closed the drawers
will be locked • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 5 drawers, dimension 560x265x70 mm • material: sheet metal • capacity of drawers: 30 kg
210
• ENG
A B H
608542 720 440 895
940E1
Tool carriage Eurostyle • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • 4 drawers (three dimensions 560x365x70 mm, one
dimension 560x400x150 mm) • lifting door with locking system • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • material: sheet metal
A B H
608544 720 440 895
940E3
Tool carriage Eurostyle • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • 6 drawers (three dimensions 560x365x70 mm, three
dimensions 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • material: sheet metal
A B H
608545 720 440 895
940E4
Tool carriage Eurostyle • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • 7 drawers (five dimensions 560x365x70 mm, two
dimensions 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • material: sheet metal
A B H
612138 720 440 895
940E4/1L
Tool carriage Eurostyle • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • 7 drawers (five dimensions 560x365x70 mm, two
dimensions 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • left and right side are perforated • include 10 hooks dimension 500 mm • ABS tray on the top of the carriage • material: sheet metal
A B H
608547 720 440 895
940E6
Tool carriage Eurostyle • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • 8 drawers (seven dimensions 560x365x70 mm, one
dimension 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • material: sheet metal
A B H
611757 720 500 975
940E9
Tool carriage • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • 8 drawers (seven dimensions 560x365x70 mm, one
dimension 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • material: sheet metal
211
A B H
608923 350 120 300
940ES1
Basket • material: sheet metal • possibility to fit with tool carriage Eurostyle
and Eurovision
A B H
608924 350 120 300
940ES2
Sheet metal basket • material: sheet metal • possibility to fit with tool carriage Eurostyle
and Eurovision
608925
940ES3
Partitions set - 4 pieces for 940E • material: sheet metal
619445
619447
940ES4A
Paper holder - maxi roll • from metal • delivery without hand towels
608968
940ES4
Paper holder • from metal • delivery without hand towels
609499 2
940ES4P
Paper • for holder 940ES4
A B H
608969 330 60 300
940ES5
Document holder • material: sheet metal • possibility to fit with tool carriage Eurostyle
and Eurovision
A B H
608970 350 200 150
940ES6
Finishing plate • material: sheet metal • possibility to fit with tool carriage Eurostyle
and Eurovision
A B H
608971 350 100 70
940ES7
Holder for bottles • material: sheet metal • possibility to fit with tool carriage Eurostyle
and Eurovision
A B H
608972 705 440 22
940ES8
ABS plate • material polystyrene
A B H
608973 690 430 16
940ES9
Wooden plate
212
• ENG
A B H
617227$ 700 355 890
940ECO
Tool carriage Economic • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • possibility to add accessories • ecological lacquered with cadmium and lead free colour • material: sheet metal • 6 drawers (four dimensions 490x275x70 mm, two
dimensions 490x310x150 mm) • capacity of drawers: 30 kg
617269$
940ECOS1
3 pcs set of partitions for 940ECO • material: sheet metal • ecological lacquered with cadmium and lead free colour
618460$
940ECOES7
Bottle holder Economic • material: sheet metal • ecological lacquered with cadmium and lead free colour
A B H
619884$ 720 440 895
940EV1
Tool carriage Eurovision • locking system • new wheels dia. 125 mm, for improved agility and stability • opening and closing of drawers is very simple due to
the uniform solution - drawer handle on the upper side enables users a synchronic grip and opening of a carriage drawer
• drawers with ball-bearing slides • the antislip synthetic covering protect drawers and
tools from damage • drawer closing mechanism prevents unwanted opening
of drawers • possibility to add accessories • ecological lacquered with cadmium and lead free colour • blind nuts for fixing accessories are mounted on
the carriage • lifting door with locking system • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • 4 drawers (three dimensions 563x365x70 mm, one
dimensions 563x410x150 mm) • material: sheet metal
A B H
621436$ 720 440 895
940EV3
Tool carriage Eurovision • locking system • new wheels dia. 125 mm, for improved agility and stability • opening and closing of drawers is very simple due to
the uniform solution - drawer handle on the upper side enables users a synchronic grip and opening of a carriage drawer
• drawers with ball-bearing slides • the antislip synthetic covering protect drawers and
tools from damage • drawer closing mechanism prevents unwanted opening
of drawers • possibility to add accessories • ecological lacquered with cadmium and lead free colour • blind nuts for fixing accessories are mounted on
the carriage • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • material: sheet metal • 6 drawers (three dimensions 563x365x70 mm, three
dimensions 563x410x150 mm)
213
A B H
619885$ 720 440 895
940EV4
Tool carriage Eurovision • locking system • new wheels dia. 125 mm, for improved agility
and stability • opening and closing of drawers is very simple due to
the uniform solution - drawer handle on the upper side enables users a synchronic grip and opening of a carriage drawer
• drawers with ball-bearing slides • the antislip synthetic covering protect drawers and
tools from damage • drawer closing mechanism prevents unwanted open-
ing of drawers • possibility to add accessories • ecological lacquered with cadmium and lead free colour • blind nuts for fixing accessories are mounted on
the carriage • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • 7 drawers (five dimensions 563x365x70 mm, two
dimensions 563x410x150 mm) • material: sheet metal
A B H
619886$ 720 440 895
940EV6
Tool carriage Eurovision • locking system • new wheels dia. 125 mm, for improved agility
and stability • opening and closing of drawers is very simple due to
the uniform solution - drawer handle on the upper side enables users a synchronic grip and opening of a carriage drawer
• drawers with ball-bearing slides • the antislip synthetic covering protect drawers and
tools from damage • drawer closing mechanism prevents unwanted open-
ing of drawers • possibility to add accessories • ecological lacquered with cadmium and lead free colour • blind nuts for fixing accessories are mounted on
the carriage • static load capacity of carriage without wheels: 1600 kg • capacity of drawers: 40 kg • 8 drawers (seven dimensions 563x365x70 mm, one
dimension 563x410x150 mm) • material: sheet metal
A B H
620416$ 350 120 300
940EVS1
Sheet metal basket Eurovision • material: sheet metal • possibility to fit with tool carriage Eurovision
620418$
940EVS4
Paper holder Eurovision • from metal • delivery without hand towels
A B H
620419$ 350 100 85
940EVS7
Holder for bottles Eurovision • material: sheet metal • possibility to fit with tool carriage Eurovision
A B H
620417$ 580 20.5 464
940.1EV
Tool rack wall Eurovision • material: sheet metal • a perforated sheet metal tool rack wall for hanging
tools and other accessories can be attached to the Eurovision carriage
214
• ENG
A B H
612218 730 465 975
940M1
Tool carriage Euromaster • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • lacquered with cadmium and lead free colour • 6 drawers (five dimensions 560x365x70 mm, one
dimension 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • load capacity on each part of closed cover: 80 kg, on
opened - 32 kg • capacity of drawers: 40 kg • with bottle holder and plastic insert
for small parts • material: sheet metal
A B H
612324 730 465 975
940M2
Tool carriage Euromaster • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 3 drawers (two dimensions 560x365x70 mm, one
dimension 560x400x150 mm) • static load capacity of carriage without wheels: 1600 kg • load capacity on each part of closed cover: 80 kg, on
opened - 32 kg • capacity of drawers: 40 kg • material: sheet metal
A B H
615510 1080 550 955
940H1
Tool carriage Hercules • locking system (2 security locks) • 4 wheels, two with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 7 front drawers dim. 560x365 mm (5 height 70 mm
and 2 height 150 mm) • 7 side drawers dim. 390x323 mm (5 height 70 mm and
2 height 150 mm) • wooden worktop • static load capacity of carriages without wheels: 2300 kg • capacity of side drawers: 25 kg • capacity of front drawers: 40 kg • material: sheet metal
A B H
615511 1080 550 955
940H2
Tool carriage Hercules • locking system • 4 wheels, two with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 7 front drawers dim. 560x365 mm (5 height 70 mm
and 2 height 150 mm) • door with lock • wooden worktop • static load capacity of carriages without wheels: 2300 kg • capacity of front drawers: 40 kg • material: sheet metal
A B H
615512 1080 550 955
940H3
Tool carriage Hercules • locking system • 4 wheels, two with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 7 front drawers dim. 560x365 mm (5 height 70 mm and
2 height 150 mm) • one side with shelves • wooden worktop • static load capacity of carriages without wheels: 2300 kg • capacity of front drawers: 40 kg
A B H
621442$ 608 120 1025
940.1H
Tool rack wall for Hercules
A B H
610932 339 65 0.8
940HS3
Partitions set-3 pieces for 940H • material: sheet metal
215
A B H
607054 720 380 910
940/2
Tool carriage • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • room for storage of larger tools • 4 drawers accessible from either side • independent sliding doors on either side • material: sheet metal
A B H
607135 720 380 910
940/3
Tool carriage • locking system • 4 wheels, one with brake • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • room for storage of larger tools • 3 drawers accessible from one side • independent sliding doors on one side • material: sheet metal
A B H
610159 585 405 75
D3
Small drawer for 940E1-9, 938/3V, 5V • for art. 940E1-9
A B H
610160 585 405 153
D4
Big drawer 940E1- E9, 938/3V, 5V • for art. 940E1- E9
A B H
613099 585 405 75
D11
Small drawer for 946A • for art. 946A
A B H
613098 585 615 153
D12
Big drawer 946A • for art. 946A
A B H
615998 585 405 75
D13
Small drawer 940H1, H2, H3, 940M1, M2 • for art. 940H1, H2, H3, 940 M1, M2, M3
A B H
615999 585 405 153
D14
Big drawer 940H1, H2, H3, 940M1, M2 • for art. 940 H1, H2, H3, 940 M1, M2, M3
A B H
616000 415 365 75
D15
Small drawer, side 940H1 • for art. 940H1
A B H
616001 415 365 153
D16
Big drawer 940H1 • for art. 940H1
A B H
619521 585 405 75
D17
Small drawer 920
A B H
619520 585 405 155
D18
Big drawer 920
216
• ENG
A B H
620563$ 585 413 155
D19
Big drawer Eurovision
A B H
620246$ 520 313 155
D19ECO
Big drawer 940ECO
A B H
620564$ 585 413 75
D20
Small drawer Eurovision
A B H
620247$ 520 313 75
D20ECO
Small drawer 940ECO
621663$
D939EV1
Small drawer for tool chest Eurovision
621664$
D939EV2
Big drawer for tool chest Eurovision
610165 180°
K1
Key with lock 940E1-9, H1, H2, H3, M1, M2, M3, 940/2, 940/3, 946A • for art. 940E1- E16, 940 H1, H2, H3, 940 M1, M2, M3,
940/2, 940/3, 946A
610233
K1S
Set of two keys with locks 940E1 • for art. 940E1, E11
615004 90°
K7
Key with lock 938/3E, 5E, 5M, 5V, 939/3E, 5E, 948E1, E2, E3, 940M1, M2, M3(cover) • for art. 938/3E, 5E, 5M, 5V, 939/3E, 5E, 948E1, E2, E3,
940M1, M2, M3 (cover), 912/01, 02, 03
619522 180°
K8
Key with lock 920
620562$ 180°
K9
Key with lock Eurovision
610171
R1
Handle 940E1-9 • for art. 940E1 - E9
610174
R4
Handle 940H1, H2, H3 • for art. 940H, H1, H2, H3
616002
R5
Handle 940M1, M2, M3 • for art. 940M1, M3
A B H
620565$ 475 98 40
R7
Handle Eurovision
217
A B
610177 694 434
T2
Syntetic covering for the top 940E1-9 • for art. 940E1-9
A B
610178 710 372
T3
Synthetic covering for the top 940/2, 940/3 • for art. 940/2, 940/3
A B
610180 710 372
T5
Synthetic covering for drawers 940E1-9, H1, H2, H3, M1, M2, M3 • for art. 940E1 - E16, 940H, H1, H2, H3, 940M1, M2, M3
A B
615247 560 398
T6
Syntetic covering for the drawers 940E1-9, H1, H2, H3, M1, M2, M3 • for art. 940E1 - E16, 940H, H1, H2, H3, 940M1, M2, M3
A B
616003 391 341
T7
Syntetic covering for the drawers • for art. 940H1
A B
616004 391 359
T8
Syntetic covering for the drawers • for art. 940H1
A B
616005 560 591
T9
Syntetic covering for the drawers 946A • for art. 946A
A B
616006 560 608
T10
Syntetic covering for the drawers 946A • for art. 946A
A B
616007 589 437
T11
Syntetic covering for shelf 940M1, M2, M3 • for art. 940M1, M2, M3
A B
620566$ 694 434
T12
Synthetic covering for top Eurovision
A B
620568$ 560 380
T13
Synthetic covering for small drawer Eurovision
A B
620569$ 560 405
T14
Synthetic covering for big drawer Eurovision
A B
620939$ 375 650
T920
Synthetic covering for small and big drawer Europlus • for art. 920PLUS1, 920PLUS2
621665$
T939EV1
Syntetic covering for small drawer for tool chest Eurovision
621666$
T939EV2
Syntetic covering for big drawer for tool chest Eurovision
L
610181 400
V1
Ball-bearing slide 940E1-9 • for art. 940E1-9
L
610182 350
V2
Ball-bearing slide for 940H1 • for art. 940H, H1
L
603664 400
V3
Ball-bearing slide for 940 H1, H2, H3, 940 M1, M2, M3 • for art. 940H1, H2, H3, 940M1, M2, M3
L
613100 600
V4
Ball-bearing slide 946A • for art. 946A
L
616008 700
V5
Ball-bearing slide 940M1, M2, M3 (for cover) • for cover for art. 940M1, M2, M3
L
619551$ 300
V6
Ball bearing slide for 940ECO
L
619523 400
V8
Ball-bearing slide 920
218
• ENG
610183 100
W1
Flexible wheel with brake 940E1-6, 940M1, M2, M3, 938/5M • for art. 940E1 - E6, 940E11 - E16, 940M1, M2, M3, 938/5M
610184 100
W2
Flexible wheel without brake for 940E1 - E6, 940 M1, M2, M3, 938/5M • for art. 940E1 - E6, 940E1-9, 940 M1, M2, M3, 938/5M
610185 100
W3
Fixed wheel 940E1-6, 940M1, M2, M3, 938/5M • for art. 940E1 - E6, 940E11 - E16, 940 M1, M2, M3, 938/5M
610186 100
W4
Flexible wheel with brake 940/2, 940/3 • for art. 940/2, 940/3
610187 100
W5
Flexible wheel without brake 940/2, /3 • for art. 940/2, 940/3
610188 150
W6
Fixed wheel 940/2, /3, 940E9 • for art. 940/2, 940/3, 940E9
610189 160
W7
Fixed wheel 940H1, H2, H3 • for art. 940H1, H2, H3
610190 125
W8
Rotating wheel with brake • for art. 940H, H1, H2, H3
610191 100
W20
Set of wheels 940E1-6, 940M1, M2, M3, 938/5M • for art. 940E1 - E6, 940 M1, M2, M3, 938/5M
610192
W21
Set of wheels 940E9 • for art. 940E9
610193
W22
Set of wheels 940/2, /3 • for art. 940/2, 940/3
610194
W23
Set of wheels 994 • for art. 994
610195
W24
Set of wheels 940H1, H2, H3 • for art. 940H, H1, H2, H3
619524 125
W26
Set of wheels 920 • for art. 920 PLUS
219
943P1 943P2 943P3 943P4 943P5 943P6 943P7 943P8 943P9 943P10 943P11 943P12
619030 942A1 - - - - - - - 2x 1x - - 1x
619031 942A2 - - 1x - 1x - - - 1x - - -
619032 942A3 - - - 1x 1x - - - 1x - - -
619033 942A4 - - - - 1x - - 1x 1x - - -
619034 942A5 - - 1x - - - - 1x 1x - - -
619035 942A6 - - - 1x - - - 1x 1x - - -
619036 942A7 - - 1x - - - 1x 1x 1x - - -
619037 942A8 - - - 1x - - 1x 1x 1x - - -
619038 942A9 - - - - 1x 1x - 1x 1x - - -
619039 942A10 - - 1x - - 1x 1x 1x 1x - - -
619040 942A11 - - - 1x - 1x 1x 1x 1x - - -
619041 942A12 - - - - 1x 1x 1x 1x 1x - - -
619042 942A13 1x - - - - - - 1x 1x - - -
619043 942A14 - 1x - - - - - 1x 1x - - -
619044 942A15 1x - - - - 1x - 1x 1x - - -
619045 942A16 - 1x - - - 1x - 1x 1x - - -
619046 942A17 1x - - - - - 1x 1x 1x - - -
619047 942A18 - 1x - - - - 1x 1x 1x - - -
619048 942A19 1x - - - 1x - - - 1x - - -
619049 942A20 - 1x - - 1x - - - 1x - - -
619050 942A21 1x - 1x - - - - - 1x - - -
619051 942A22 - 1x 1x - - - - - 1x - - -
619052 942A23 1x - - 1x - - - - 1x - - -
619053 942A24 - 1x - 1x - - - - 1x - - -
(943 P4, 618469)
(943 P1, 618466)
(943 P2, 618467)
(943 P3, 618468) (943 P5, 618470)
(943 P6, 618471)
(943 P7, 618472)
(943 P8, 618473)
(943P12, 618477)
(943 P9, 618474)
(943P11, 618476)
(943 P10, 618475)
942
Modular work bench • The modular work bench is an indispensible piece of equipment in both profes-
sional and home workshops. It is used as a work surface and for safely storing tools large and small, as well as for temporarily laying aside tools and various materials. It is comprised of various modules that enable the composition of vari-ous forms of work bench, giving each user the possibility of creating an ideal lay-out with regard to both your needs and the instalment possibilities. Assembly is fast, simple and safe. A template is included to allow the precise drilling of holes. The components of the modular work bench are made of quality sheet metal up to 3 mm thick. The surface of the work bench’s supporting structure is protected by powder paint, protecting the surface from both mechanical and atmospheric damage, as well as influences from the chemical environment.The counter is made of a massive composite panel allowing for rough work on its surface while, at the same time, it is protected with an environmentally-friendly coating.The counter is robust and hard-wearing and designed to take a heavy surface load.
220
• ENG
A B H
618466 665 650 870
943P1
Tool chest big - 7 drawers • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 7 drawers (five dimensions 560x570x70 mm, two
dimensions 560x605x150 mm) • capacity of drawers: 40 kg • possible use of SOS tool tray system in drawers • material: sheet metal
A B H
618467 665 650 870
943P2
Tool chest big - 8 drawers • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 8 drawers (seven dimensions 560x570x70 mm, one
dimension 560x605x150 mm) • capacity of drawers: 40 kg • possible use of SOS tool tray system in drawers • material: sheet metal
A B H
618468 495 650 870
943P3
Tool chest small - 7 drawers • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 7 drawers (five dimensions 390x570x70 mm, two
dimensions 390x605x150 mm) • capacity of drawers: 40 kg • possible use of SOS tool tray system in drawers • material: sheet metal
A B H
618469 495 650 870
943P4
Tool chest small - 8 drawers • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 8 drawers (seven dimensions 390x570x70 mm, one
dimension 390x605x150 mm) • capacity of drawers: 40 kg • possible use of SOS tool tray system in drawers • material: sheet metal
A B H
618470 495 650 870
943P5
Tool chest - 2 drawers and door • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 2 drawers dimensions 390x570x70 mm • with door • capacity of drawers: 40 kg • possible use of SOS tool tray system in drawers • material: sheet metal
A B H
618471 495 650 390
943P6
Tool chest - 4 drawers • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • 4 drawers dimensions 390x570x70 mm • capacity of drawers: 40 kg • possible use of SOS tool tray system in drawers • material: sheet metal
A B H
618472 495 650 390
943P7
Cabinet for modular work bench • locking system • ecological lacquered with cadmium and lead free colour • with door • material: sheet metal
221
A B H
618473 100 650 870
943P8
Support for modular work bench • ecological lacquered with cadmium and lead free colour • material: sheet metal
A B H
618474 1650 750 40
943P9
Short wooden working plate for modular work bench • plywood – beech wood • protected with environmentally friendly coating
A B H
618475 2050 750 40
943P10
Long wooden working plate for modular work bench • plywood – beech wood • protected with environmentally friendly coating
A B H
618476 1920 70 50
943P11
Long connector for modular work bench • ecological lacquered with cadmium and lead free colour • material: sheet metal
A B H
618477 1520 70 50
943P12
Short connector for modular work bench • ecological lacquered with cadmium and lead free colour • material: sheet metal
A B H
621401$ 583 558 60
943PS1
Partitions set-5 pieces for 943P1,P2 and 946 • material: sheet metal
A B H
621402$ 583 388 60
943PS2
Partitions set-5 pieces for 943P3,P4 • material: sheet metal
222
• ENG
943P1 943P2 943P3 943P4 943P5 943P6 943P7 943P8 943P9 943P10 943P11 943P12
619054 944A1 - - - - - - - 2x - 1x 1x -
619055 944A2 - - 1x - 1x - - - - 1x - -
619056 944A3 - - - 1x 1x - - - - 1x - -
619057 944A4 - - - - 1x - - 1x - 1x - -
619058 944A5 - - 1x - - - - 1x - 1x - -
619059 944A6 - - - 1x - - - 1x - 1x - -
619060 944A7 - - 1x - - - 1x 1x - 1x - -
619061 944A8 - - - 1x - - 1x 1x - 1x - -
619062 944A9 - - - - 1x 1x - 1x - 1x - -
619063 944A10 - - 1x - - 1x 1x 1x - 1x - -
619064 944A11 - - - 1x - 1x 1x 1x - 1x - -
619065 911A12 - - - - 1x 1x 1x 1x - 1x - -
619066 944A13 1x - - - - - - 1x - 1x - -
619067 944A14 - 1x - - - - - 1x - 1x - -
619068 944A15 1x - - - - 1x - 1x - 1x - -
619069 944A16 - 1x - - - 1x - 1x - 1x - -
619070 944A17 1x - - - - - 1x 1x - 1x - -
619071 944A18 - 1x - - - - 1x 1x - 1x - -
619072 944A19 1x - - - 1x - - - - 1x - -
619073 944A20 - 1x - - 1x - - - - 1x - -
619074 944A21 1x - 1x - - - - - - 1x - -
619075 944A22 - 1x 1x - - - - - - 1x - -
619076 944A23 1x - - 1x - - - - - 1x - -
619077 944A24 - 1x - 1x - - - - - 1x - -
619078 944A25 - - 2x - - 2x - - - 1x - -
619079 944A26 - - - 2x - 2x - - - 1x - -
619080 944A27 - - 2x - - - 2x - - 1x - -
619081 944A28 - - - 2x - - 2x - - 1x - -
619082 944A29 - - 1x 1x - - 2x - - 1x - -
619083 944A30 - - 1x 1x - 2x - - - 1x - -
619084 944A31 - - 1x 1x - 1x 1x - - 1x - -
619085 944A32 - - - 2x - 1x 1x - - 1x - -
619086 944A33 - - 2x - - 1x 1x - - 1x - -
619149 944A34 - - 1x - 1x 1x 1x - - 1x - -
619484 944A35 - - 1x - 1x 1x - - - 1x - -
(943 P4, 618469)
(943 P1, 618466)
(943 P2, 618467)
(943 P3, 618468) (943 P5, 618470)
(943 P6, 618471)
(943 P7, 618472)
(943 P8, 618473)
(943P12, 618477)
(943 P9, 618474)
(943P11, 618476)
(943 P10, 618475)
944
Modular work bench • The modular work bench is an indispensible piece of equipment in both profes-
sional and home workshops. It is used as a work surface and for safely storing tools large and small, as well as for temporarily laying aside tools and various materials. It is comprised of various modules that enable the composition of vari-ous forms of work bench, giving each user the possibility of creating an ideal lay-out with regard to both your needs and the instalment possibilities. Assembly is fast, simple and safe. A template is included to allow the precise drilling of holes. The components of the modular work bench are made of quality sheet metal up to 3 mm thick. The surface of the work bench’s supporting structure is protected by powder paint, protecting the surface from both mechanical and atmospheric damage, as well as influences from the chemical environment. The counter is made of a massive composite panel allowing for rough work on its surface while, at the same time, it is protected with an environmentally-friendly coating. The counter is robust and hard-wearing and designed to take a heavy surface load.
223
A B H
612328 1500 750 925
946A
Work bench • locking system • drawers with ball-bearing slides • the synthetic covering protect drawers and tools
from damage • ecological lacquered with cadmium and lead free colour • wooden worktop • 5 drawers (three dimensions 560x570x70 mm, one
dimension 560x605x150 mm) • static load capacity: 2300 kg • capacity of drawer: 40 kg • material: sheet metal
A B H
612329 1500 125 740
946C
Cabinet for work bench • material: sheet metal • ecological lacquered with cadmium and lead free colour • with 30 hooks
A B H
612330 1500 125 740
946CR
Cabinet with roller shutter for work bench • ecological lacquered with cadmium and lead free colour • with 30 hooks • model CR with roller shutter
and with locking system • material: sheet metal
A B H
612220 1500 750 1665
946AC
Work bench with cabinet • combination of work bench (art. 946A) and cabinet for
work bench (art. 946C) (article 946 ACR cabinet with roller shutter)
A B H
612331 1500 750 1665
946ACR
Work bench with cabinet with roller shutter • combination of work bench (art. 946A) and cabinet
with roller shutter for work bench (art. 946CR)
A C B
613097 665 20 565
946D
Door for work bench art. 946 • material: sheet metal • ecological lacquered with cadmium and lead free colour • material: sheet metal
A B H
621573$ 1000 600 850
946G
Worktable • material: sheet metal • ecological lacquered with cadmium and lead free colour • plywood – beech wood • protected with environmentally friendly coating
A B H
621448$ 2050 750 800
946T
Mobile work bench • material: sheet metal • ecological lacquered with cadmium and lead free colour • plywood – beech wood • protected with environmentally friendly coating • dinamic load capacity: 2000 kg wheels dia. 200 mm
224
• ENG
A B H
610954 1035 440 1150
947
Cabinet for documents • drawers with ball-bearing slides • ecological lacquered with cadmium and lead free colour • wooden worktop • 23 drawers dim. 920x363x42 • material: sheet metal capacity of drawers: 30 kg
A B C
611961 355 40 0.8
947S3
Set of partitions for 947
A B H
612215 700 300 900
948E1
Tool cabinet • locking system • drawers with ball-bearing slides • ecological lacquered with cadmium and lead free colour • 1 drawer, dimension 560x245x70 • the interior of the cabinet is fitted with perforated
steel plate • material: sheet metal
612908
948E1.1
Accessories for 948E1 • accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim.
50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches - 3 pcs and chisels - 1 pcs
A B H
612583 700 300 900
948E1S
Tool cabinet with accessories • locking system • drawers with ball-bearing slides • ecological lacquered with cadmium and lead free colour • 1 drawer, dimension 560x245x70 • the interior of the cabinet is fitted with perforated
steel plate • accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim.
50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches - 3 pcs and chisels - 1 pcs
A B H
612216 700 300 900
948E2
Tool cabinet • locking system • ecological lacquered with cadmium and lead free colour • the interior of the cabinet is fitted with perforated
steel plate • material: sheet metal
A B H
612584 700 300 900
948E2S
Tool cabinet • locking system • ecological lacquered with cadmium and lead free colour • the interior of the cabinet is fitted with perforated
steel plate • accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim.
50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches - 3 pcs and chisels - 1 pcs
225
612909
948E2.1
Accessories for 948E2 • accessories: hooks (35 pcs dim. 35 mm, 10 pcs dim.
50 mm and 20 pcs dim. 100 mm), with metal stands for wrenches - 3 pcs and chisels - 1 pcs
A B H
612217 500 300 900
948E3
Tool cabinet • locking system • ecological lacquered with cadmium and lead free colour • the interior of the cabinet is fitted with perforated
steel plate • material: sheet metal
A B H
612585 500 300 900
948E3S
Tool cabinet • locking system • ecological lacquered with cadmium and lead free colour • the interior of the cabinet is fitted with perforated
steel plate • accessories: hooks (20 pcs dim. 35 mm, 5 pcs dim.
50 mm, and 10 pcs dim. 100 mm), with metal stands for wrenches - 1 pcs and chisels - 1 pcs
612910
948E3.1
Accessories for 948E3 • accessories: hooks (20 pcs dim. 35 mm, 5 pcs dim.
50 mm, and 10 pcs dim. 100 mm), with metal stands for wrenches - 1 pcs and chisels - 1 pcs
A B H
608393 720 595 2000
949/3
Tool cabinet • ecological lacquered with cadmium and lead free colour
A B H
609236 720 595 1000
949.1/3
Tool cabinet • ecological lacquered with cadmium and lead free colour • with shelves • is part of 949/3
A B H
609237 720 595 1000
949.2/3
Tool cabinet • ecological lacquered with cadmium and lead free colour • with drawers • is part of 949/3
A B H
611992 673 575 20
949.3/3
Additional shelf for 949.1/3 • ecological lacquered with cadmium and lead free colour
226
• ENG
A B H A1 B1 H1
617115$ 350 500 1880 300 20 875
950/2
Wardrobe cabinet, 2 compartments • the wardrobes are powder painted to resist rusting.
For additional protection the sheet steel is ecologically lacquered with cadmium and lead free colour. The wardrobe doors in bright colours fill each room with youthful atmosphere
• the body of the wardrobe is made of 0.8 mm thick high quality sheet steel
• the doors are made of 1 mm thick sheet steel, rein-forced against lateral torsion and bending. The doors come in six different colours (RAL 1021, RAL 3020, RAL 5010, RAL 6029, RAL 2004 and RAL 7035)
A B H A1 B1 H1
616652$ 1000 500 1880 300 20 875
950/6
Wardrobe cabinet, 6 compartments • t he wardrobes are powder painted to resist rusting.
For additional protection the sheet steel is ecologically lacquered with cadmium and lead free colour. The wardrobe doors in bright colours fill each room with youthful atmosphere
• the body of the wardrobe is made of 0.8 mm thick high quality sheet steel
• the doors are made of 1 mm thick sheet steel, rein-forced against lateral torsion and bending. The doors come in six different colours (RAL 1021, RAL 3020, RAL 5010, RAL 6029, RAL 2004 and RAL 7035)
A B H A1 B1 H1
617175$ 1000 500 1880 300 20 1775
950/3V
Wardrobe cabinet, 3 compartments • the wardrobes are powder painted to resist rusting.
For additional protection the sheet steel is ecologically lacquered with cadmium and lead free colour. The wardrobe doors in bright colours fill each room with youthful atmosphere
• the body of the wardrobe is made of 0.8 mm thick high quality sheet steel
• the doors are made of 1 mm thick sheet steel, rein-forced against lateral torsion and bending. The doors come in six different colours (RAL 1021, RAL 3020, RAL 5010, RAL 6029, RAL 2004 and RAL 7035)
A B H A1 B1 H1
617176$ 1000 500 1880 300 20 1775
950/6Z
Wardrobe cabinet, 6 compartments • t he wardrobes are powder painted to resist rusting.
For additional protection the sheet steel is ecologically lacquered with cadmium and lead free colour. The wardrobe doors in bright colours fill each room with youthful atmosphere
• the body of the wardrobe is made of 0.8 mm thick high quality sheet steel
• the doors are made of 1 mm thick sheet steel, rein-forced against lateral torsion and bending. The doors come in six different colours (RAL 1021, RAL 3020, RAL 5010, RAL 6029, RAL 2004 and RAL 7035)
RAL 1021 RAL 3020 RAL 5010 RAL 6029 RAL 7035RAL 2004
USE 950
Wardrobe cabinet
20 kg
227
A B H A1 B1 H1
617116$ 1000 500 1880 300 20 575
950/9
Wardrobe cabinet, 9 compartments • the wardrobes are powder painted to resist rusting.
For additional protection the sheet steel is ecologically lacquered with cadmium and lead free colour. The wardrobe doors in bright colours fill each room with youthful atmosphere
• the body of the wardrobe is made of 0.8 mm thick high quality sheet steel
• the doors are made of 1 mm thick sheet steel, rein-forced against lateral torsion and bending. The doors come in six different colours (RAL 1021, RAL 3020, RAL 5010, RAL 6029, RAL 2004 and RAL 7035)
617188$
950.1
Frame for identification card
617177$
950.3
Shelf for 950/9,6,3,2,1
617187$
950.4
Waved plastic insert for 950/9,6,3,2,1
617180$
K950
Key with lock for wardrobe cabinet
617183$
K950COMB
Key with combination lock for wardrobe cabinet
A B H
605896 700 380 310
960/1
Tool box • ecological lacquered with cadmium and lead free colour • intended for transport and storage of tools, power
tools and equipment, documentation in various climatic conditions
A B H
605897 840 420 335
960/2
Tool box • ecological lacquered with cadmium and lead free colour • intended for transport and storage of tools, power
tools and equipment, documentation in various climatic conditions
A B H
605898 910 530 430
960/3
Tool box • ecological lacquered with cadmium and lead free colour • intended for transport and storage of tools, power
tools and equipment, documentation in various climatic conditions
A B H
603673 550 200 230
612989 620 200 230
960/6
Installers tool box • ecological lacquered with cadmium and lead free colour • with synthetic belt