-12652
1265-1266_F51-002_cENG
-12662
1265-1266_F51-002_cENG cENG 2nd
Part Number
SUTPK10A
Part Number - Paint Color - L - (NS)
SGGP8ASUTD15A - BR
--
200500 - NS
Steel Pipe
Part Number MMaterial Standards Application SSurface TreatmentSGG# SGP JIS G3452 Pneumatic Pipes for Low Operating Pressure Steam/Water/Oil/Gas -SGP## SGPW JIS G3442 Pipes for draining water, air conditioning, etc. Zinc PlatingSUT## SUS304TP JIS G3459 Corrosion / Low Temperature / High
Temperature Resistant Pipes-
SUTS# SUS316TP JIS G3459 -STPG# STPG370(Sch40) JIS G3454 Pressure pipes to be used under
350C-
SGHP# STPG370(Sch80) JIS G3454 -
Alterations
No Sealing Tape
Code NS
Spec.Shipped without regular sealing tape on male threads.EApplicable to Shape P, A, D and F only.
No Sealing Tape
E�For wrench flats alteration (previous SC alteration), see P.1267.
* No surface treatment on male thread portion of SGP#.* Male threads are covered with sealing tape before shipping.* Excessive tightening may deform the female thread portion. Wrap
with sealing tape for air tightness, hand tighten first, and then final tighten by giving approx. one more rotation.
* Marks may be left on the surface when tightening screws.
25
L±1
D d dd
d
dd
d
L±1
D
L±1
L±1
L±1
D
DD
2-R (PT)
R (PT)
Rc (PT)
2-Rc (PT)
R (PT)
R (PT)
Rc (PT)
d25
25
252525
2525
2525
2525
2525
25L±1
D
L±1
D
L±1
D
2525
ShapeP
ShapeA
ShapeC
ShapeW
ShapeD
ShapeE
ShapeG
ShapeF
Part NumberPaint Color Selection L
1mm IncrementR (PT)RC (PT)
SGG# SGP# SUT#/SUTS# STPG# SGHP#Type Shape No. D d D d D d D d D d
SGGSGPSUTSUTSSTPGSGHP
PAWCDEFG
6ANot specified
(Unpainted)W (White)
BR (Brown)BL (Blue)
Y (Light Yellow)R (Dark Red)
B (Black)
30~2000 1/8 10.5 6.5 - - 10.5 5.7 10.5 7.1 10.5 5.78A 40~2000 1/4 13.8 9.2 13.8 9.2 13.8 7.8 13.8 9.4 13.8 7.8
10A 40 (43)~2000 3/8 17.3 12.7 17.3 12.7 17.3 10.9 17.3 12.7 17.3 10.915A 50 (55)~2000 1/2 21.7 16.1 21.7 16.1 21.7 16.1 21.7 16.1 21.7 14.320A 50 (65)~2000 3/4 27.2 21.6 27.2 21.6 27.2 21.4 27.2 21.4 27.2 19.425A 60 (75)~2000 1 34.0 27.6 34.0 27.6 34.0 27.2 34.0 27.2 34.0 25.032A 60 (80)~2000 11/4 42.7 35.7 42.7 35.7 42.7 35.5 42.7 35.5 42.7 32.940A 60 (90)~2000 11/2 48.6 41.6 48.6 41.6 48.6 41.2 48.6 41.2 48.6 38.450A 60 (150)~1500 2 60.5 52.9 60.5 52.9 60.5 52.7 - - - -
QL Configurable
EL Dimensions in ( ) are for Shape F and G. L Dimensions 1501 ~ 2000 are available for SGG#, SGP# and SUT# only (Except No.50A).EPainted pipes are available for No.6A ~ 25A (L dimension 1500 or less) of SGG#, SUT#, STPG# and SGHP#. EShape A, W and E are not available for No. 50A.
Part Number L SGPPK SUTPK SGPPK SUTPKUnit Price Volume Discount Rate Unit Price Volume Discount Rate
Type No. D d D d 1 ~ 9 pc(s).10 ~ 30 pcs. 1 ~ 9 pc(s).10 ~ 30 pcs.
SGPPK(SGPW)
SUTPK(SUS304TP)
6A
500
- - 10.5 5.7 - -8A 13.8 9.2 13.8 7.8
10A 17.3 12.7 17.3 10.915A 21.7 16.1 21.7 16.120A 27.2 21.6 27.2 21.425A 34.0 27.6 34.0 27.2
QL Fixed (Shape C, Unpainted only)
EFor orders larger than indicated quantity, please check with WOS.
[Reference] Pipe Identification (JIS Z9102)
Material Types Identification Color Munsell Value (Reference)
Air White N9.5
Oil Brown 7.5YR5/6
Water Blue 2.5PB5/8
Gas Light Yellow 2.5Y8/6
Steam Dark Red 7.5R3/6
(* Since the color swatches are in print, they may show some shade variations.)
QTypes of Paint Colors (Japan Paint Manufactures' Association 1997 U No.) : For Internal Fluid Identification•Thread portion is not painted. •Inner surface of pipes may not be painted.White
UN-95Approx. MunsellNo. N9.5
Brown
U17-50LApprox. MunsellNo. 7.5YR5/6
Blue
U72-50PApprox. MunsellNo. 2.5PB5/8
Light Yellow
U22-80LApprox. MunsellNo. 2.5Y8/6
Dark Red
U07-30LApprox. MunsellNo. 7.5R3/6
Black
UN-10Approx. MunsellNo. N1
Part Number Unit Price P•A•W•F Shape Unit Price C Shape Unit Price D•E•G Shape
Type No. Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500 L1501~2000 Min. L
~ 250 L251~500 L501~750 L751~1000 L1001~1500 L1501~2000 Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500 L1501~2000
SGG#
6A8A
10A15A20A25A32A40A50A - - -
SGP#
6A - - - - - - - - - - - - - - - - - -8A
10A15A20A25A32A40A50A - - -
SUT#
6A8A
10A15A20A25A32A40A50A - - -
SUTS#
6A - - -8A - - -
10A - - -15A - - -20A - - -25A - - -
STPG#
6A - - -8A - - -
10A - - -15A - - -20A - - -25A - - -32A - - -40A - - -
SGHP#
6A - - -8A - - -
10A - - -15A - - -20A - - -25A - - -32A - - -40A - - -
QUnit Price (without Painting)
Part Number - Paint Color - L
SUTP6A - R - 200
No.Unit Price
Min. L ~ 250 L251~500 L501~750 L751~1000L1001~1500
6A8A
10A15A20A25A
No.Unit Price
Min. L~ 250 L251~500 L501~750 L751~1000L1001~1500
6A8A
10A15A20A25A
•SGG#, STPG#, SGHP#
EFor price of the painted pipes, painting charge will be added to the unit price of unpainted pipe. EPainted Pipes are not available for L dimension 1501 ~ 2000.EVolume discount rate is applicable to painting charge.
QPainting Charge•SUT# (SUS304)
(Ex.) >> (Unit Price without Painting) + (Painting Charge) = (Unit Price with Painting)
-12672
1267-1268_F51-003_cENG
-12682
1267-1268_F51-003_cENG cENG 2nd
Steel PipeWrench Flats
Heat/Cold Retention Pipe Covers / L-Shaped Angles for Steel Pipes
Part Number - Paint Color - L - SC
SSGGP8ASSUTD15A - BR
--
200500
--
SC20SC50
D
L±1
dt
HKCVP
M Material: Heat Resistant Polyethylene FoamOperating Temperature Range: -20 ~ 120°C
Q Heat/Cold Retention Pipe Covers for Elbow / Tee
D
A
B
dt
D
A
B
dt
HKCVT(For Tee)
L
D
dt
L
D
dt
HKCVE(For Elbow)
Operating Temperature Range: -20 ~ 120°CM Material: Heat Resistant Polyethylene Foam
Q Heat/Cold Retention Pipe Covers for Pipes
Part Number - L
HKCVP6AHKCVE6A
- 100
Q Pipe Covering Tape
L
W±
1
T
HKTPE
Part Number
HKTPE25
M Material: PolypropyleneOperating Temperature Range: -20 ~ 80°C
Part Number L (m) T (mm) Unit Price Volume Discount RateType W (mm) 1 ~ 9 pc(s). 10 ~ 30 pcs.
HKTPE 25 55 0.12 50
E�For orders larger than indicated quantity, please check with WOS.
Part Number MMaterial Application SSurface Treatment
SSGG# SGP Pneumatic Pipes for Low Operating Pressure Steam/Water/Oil/Gas -SSGP# SGPW Pipes for draining water, air conditioning, etc. Zinc PlatingSSUT# SUS304TP
Corrosion / Low Temperature / High Temperature Resistant Pipes-
SSUTS# SUS316TP -
Q L-Shaped Angles for Steel Pipes
25
HT
BL
GW
R
FA
4-C2
GW
R4-C2
FF
A1A
PP2-D
HT
BL
2-D
HT
BL
GW
R
FA
4-C2
GW
R4-C2
FF
A1A
PP2-D
HT
BL
2-D
FA
GPW
R
TH
BL
4-C2
P2-D
Single Slot Double Slot Cantilever
EThe material of SGPLD is SPHC.
TypeMMaterial SSurface Treatment
Single Slot Double Slot CantileverSGPL SGPLD SGPLK SPCCE Black OxideSGPLS SGPLDS SGPLKS SUS304D -
SGPLPipe Manifold (SGM)
U-Bolt (UB)(P.1270)
(P.1259)
Part Number
SGPL4
Part Number TH L W
DP B A F
GR
Unit Price
Type U-Bolt Thread Size M SGPL SGPLS Hole Dia. Applicable
ScrewSlotted
HoleApplicable
Screw SGPL SGPLS
Single Slot SGPLSGPLS
43.2 3
80 30 30 5.5 M5 20 20 45 55 4.5 M4 2.255 100 40 40 25 30 55 70 5.5 M5 2.756 6.5 M6 6.5 M6 3.25
Part Number TH L W
DP B A A1 F
GR
Unit Price
Type U-Bolt Thread Size M SGPLD SGPLDS Hole Dia. Applicable
ScrewSlotted
HoleApplicable
Screw SGPLD SGPLDS
Double Slot SGPLDSGPLDS
44.5 4
160 50 40 6.5 M6 2535 45 75 60 4.5 M4 2.25
5 200 70 40 45 57.5 90 75 5.5 M5 2.756 8.5 M8 6.5 M6 3.25
EP.237Use with flat washers (PWF, SPWF) is recommended. EFor detailed U bolt dimensions, see P.1270.
Part Number TH L W
DB A F
GR P
Unit Price
Type U-Bolt Thread Size M SGPLK SGPLKS Hole Dia. Applicable
ScrewSlotted
HoleApplicable
Screw SGPLK SGPLKS
CantileverSGPLKSGPLKS
43.2 3
80 30 808.5 M8
20 45 55 4.5 M4 2.25 40
5 100 40 90 30 55 70 5.5 M5 2.75 50
* No surface treatment on male thread portion of SSGP#.* Male threads are covered with sealing tape before shipping.* Excessive tightening may deform the female thread portion. Wrap
with sealing tape for air tightness, hand tighten first, and then final tighten by giving approx. one more rotation.
* There may be some scratches remaining from threading operation.
Part Number Paint Color Selection
L1mm Increment
SC: 1mm Increment W l1
R (PT)RC (PT) T1 T2
SSGG# SSGP# SSUT#/SSUTS#Type Shape No. D d D d D d
SSGGSSGPSSUTSSUTS
PAWCDEFG
6A Not specified (Unpainted)W (White)
BR (Brown)BL (Blue)
Y (Light Yellow)R (Dark Red)
B (Black)
30~1500 5~100
ESpecifiable range is limited
depending on the shape. Refer to the formula below each
drawing.
8 8 1/8 10 15 10.5 6.5 - - 10.5 5.7 8A 40~1500 12 10 1/4 15 20 13.8 9.2 13.8 9.2 13.8 7.8 10A 40 (43)~1500 16 10 3/8 17 16 17.3 12.7 17.3 12.7 17.3 10.9 15A 50 (55)~1500 19 10 1/2 20 18 21.7 16.1 21.7 16.1 21.7 16.1 20A 50 (65)~1500 24 15 3/4 23 20 27.2 21.6 27.2 21.6 27.2 21.4 25A 60 (75)~1500 30 15 1 25 22 34.0 27.6 34.0 27.6 34.0 27.2
EL Dimensions in ( ) are for Shape F and G. ESpecifiable L dimension and SC dimension are limited depending on the shape. Refer to the formula below each drawing.EPainted pipes are available for No.6A ~ 25A of SSGG# and SSUT#.
L±1 SC
D dd
d
L±1
D
L±1
L±1
L±1
DD
2-R (PT)
R (PT)
R (PT)
T T1
T2
W
T2
Rc (PT)
d2-Rc (PT)
Rc (PT)
25
25
25 25
25
25
25
dd
dd
2525
25
2525
2525
DD
DD
2525
2525L±1 L±1
L±1
25
SC
T1
T1
R (PT)T1
SC
T
T
SC
SC
SC
SC
SC
1
2
2
T1+5≤SC≤L-T1-5-l1 T1+5≤SC≤L-5-l1
T2+5≤SC≤L-5-l1
T1+5≤SC≤L-D-l1-5
5≤SC≤L-D-l1-5
T1+5≤SC≤L-T2-5-l1
T2+5≤SC≤L-T2-5-l1
5≤SC≤L-5-l1
l1
l1
l1
l1 l1
l1
l1
l1
ShapeP
ShapeA
ShapeC
ShapeW
ShapeD
ShapeE
ShapeG
ShapeF
EWrench flats are not surface treated or colored. ET1=External Threads, T2=Internal Threads
Part Number Unit Price Shape P, A, W and F Unit Price C Shape Unit Price Shape D, E and G
Type No. Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500 Min. L
~ 250 L251~500 L501~750 L751~1000 L1001~1500 Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500
SSGG#
6A8A10A15A20A25A
SSGP#
6A - - - - - - - - - - - - - - -8A10A15A20A25A
SSUT#
6A8A10A15A20A25A
SSUTS#
6A8A10A15A20A25A
QUnit Price (without Painting)
No.Unit Price
Min. L ~ 250 L251~500L501~750 L751~1000 L1001~1500
6A8A
10A15A20A25A
No.Unit Price
Min. L ~ 250 L251~500 L501~750 L751~1000 L1001~1500
6A8A
10A15A20A25A
QAdditional Painting Charge (added to the price on the left side table)•SSGG#
•SSUT# (SUS304)
(Ex.) Part Number - Paint Color - L
SSUTP6A - R - 200>>
(Unit Price without Painting) + (Painting Charge) = (Unit Price with Painting)
EFor detailed paint colors, see P.1265.
Part Number L 1mm
IncrementD d t
Unit Price
Type No. L30~250 L251~500 L501~750 L751~1000 L1001~1500
HKCVP
6A
30~1500
26 10 8 8A 29 13 8 10A 38 18 10 15A 42 22 10 20A 48 28 10 25A 55 35 10 32A 63 43 1040A 69 49 1050A 81 61 10
Part Number D d t L A B Unit PriceType No. HKCVE HKCVT
HKCVEHKCVT
6A 32 16 8 24 32 64 8A 36 20 8 26 34 68
10A 44 24 10 32 40 80 15A 48 28 10 34 42 84 20A 54 34 10 36 44 88 25A 63 43 10 40 50 100
EA dimension and B dimension are applicable only for HKCVT.
-12872
1287-1288_F51-013_cENG
-12882
1287-1288_F51-013_cENG cENG 2nd
PVC Pipes / PVC FittingsTS Fittings / HI Fittings
Q PVC Pipe Type MMaterial Standards ColorPVCT PVC
JIS K 6742Gray
PVCH Impact Resistance PVC Blue Gray
Part Number L1mm
Increment
O.D. Thickness I.D. (Reference
Value)
Unit Price
Type No. D D Tolerance t t
TolerancePVCT
L50~200 201~400 401~600 601~800 801~1000 1001~1250 1251~1500
PVCTPVCH
13
50~1500
18 ±0.2 2.5 ±0.2 1316 22 ±0.2 3 ±0.3 1620 26 ±0.2 3 ±0.3 2025 32 ±0.2 3.5 ±0.3 2530 38 ±0.3 3.5 ±0.3 31
EThe tolerance of L dimension will be +1 ~ 3 for 50 ~ 1000, +2 ~ 5 for 1001 ~ 1500. * The price of PVCH is the price in the table above plus JPY100.
6.3
L
t
D
( )
ENote that pipe O.D. may have some scratches or small flaws on its surface.
QSockets
LZ
Q Sockets for Valve Sockets
L
R (PT)
B
d
Q Reducing Sockets
L
Z
Q Reducing Tees
M Material: PVC
I
H H
Z2
Z1
TS FittingsPVCTTD
Q45° Elbows
Z
Z
H
HHI FittingsPVCHHE
M Material: Impact Resistance PVC
M Material: PVC
Q Elastic Fittings TS FittingsPVCTY B
W
L
t
D
Q Valves
M Material: PVC
TS FittingsPVCTB
dsD
H
L1
L
Part NumberPVCHSB20
PVCHBN100
Q AdhesivePVCHBN(For Impact Resistance PVC)
PVCTBN( For PVC)
EFor dimension of the junction on fittings, see Dimension Table in Overview on P.1286. EFor specifications / application of each material, see Overview in P.1286.
Type Types M MaterialPVCTS TS Fittings PVCPVCHS HI Fittings Impact Resistance PVC
Type Types M MaterialPVCTSB TS Fittings PVCPVCHSB HI Fittings Impact Resistance PVC
Type Types M MaterialPVCTSD TS Fittings PVCPVCHSD HI Fittings Impact Resistance PVC
QCaps
L
Type Types M MaterialPVCTC TS Fittings PVCPVCHC HI Fittings Impact Resistance PVC
QTees
I
H H
Z2
Z1
Type Types M MaterialPVCTT TS Fittings PVCPVCHT HI Fittings Impact Resistance PVC
Q 90° Elbows
H
H
Z
Z
Type Types M MaterialPVCTE TS Fittings PVCPVCHE HI Fittings Impact Resistance PVC
Part Number - L
PVCT20 - 1000
Part Number Z L StandardsUnit Price
PVCTS PVCHSType No. 1 ~ 50 pcs. 20 ~ 50 pcs.
PVCTSPVCHS
13 5 57
JIS K 674316 7 6720 7 7725 7 8730 7 95
EFor orders larger than indicated quantity, please check with WOS.
Part Number R(PT) d B L StandardsUnit Price
PVCTSB PVCHSBType No. 1 ~ 50 pcs. 20 ~ 50 pcs.
PVCTSBPVCHSB
13 1/2 13 24 50
JIS K 674316 1/2 13 29 5720 3/4 18 33 6425 1 23 40 7130 1 1/4 31 46 80
EFor orders larger than indicated quantity, please check with WOS.
Part Number Z L StandardsUnit Price
PVCTSD PVCHSDType No. 1 ~ 50 pcs. 20 ~ 50 pcs.
PVCTSDPVCHSD
1613 5 61
JIS K 67432016 6 712516 15 852520 9 843025 9 93
EFor orders larger than indicated quantity, please check with WOS.
Part Number Z1 Z2 H I StandardsUnit Price
PVCTT PVCHTType No. 1 ~ 50 pcs. 20 ~ 50 pcs.
PVCTTPVCHT
13 10 10 36 36
JIS K 674316 13 13 43 4320 15 15 50 5025 18 18 58 5830 21 21 65 65
EFor orders larger than indicated quantity, please check with WOS.
Part Number L StandardsUnit Price
PVCTC PVCHCType No. 1 ~ 50 pcs. 20 ~ 50 pcs.
PVCTCPVCHC
13 29
JIS K 674316 33.520 38.525 4430 48
EFor orders larger than indicated quantity, please check with WOS.
Part Number Z1 Z2 H I Standards Unit Price
Type No. 1 ~ 50 pcs.
PVCTTD
1613 11 12 41 38
JIS K 67432016 13 15 48 452516 13 18 53 482520 15 18 55 533025 18 21 62 61
EFor orders larger than indicated quantity, please check with WOS.
Part Number Z H Standards
Unit PricePVCTE PVCHE
Type No. 1 ~ 50 pcs. 20 ~ 50 pcs.
PVCTEPVCHE
13 10 36
JIS K 674316 13 4320 15 5025 18 5830 21 65
EFor orders larger than indicated quantity, please check with WOS.
Part Number Z H Standards Unit Price
Type No. 1 ~ 50 pcs.
PVCHHE13 7 33
JIS K 674320 9 4425 11 51
EFor orders larger than indicated quantity, please check with WOS.
Part Number D t L B W Standards Unit PriceType No. 1~10 pcs.
PVCTY
13 26 3 68 25 38 JIS K 674316 34 5.5 110 29 42 -20 35 3.5 78 29 50
JIS K 674325 43 4 89 29 5630 48 4 98 33.5 63
EFor PVCTY16, the nut is round-shaped.EFittings for absorbing expansion / contraction of PVC Pipe due to heat
EFor orders larger than indicated quantity, please check with WOS.
Part Number D ds H L L1 Standards Unit Price Volume Discount RateType No. 1 ~ 9 pc(s). 10 ~ 30 pcs.
PVCTB
16 50 22 78 109 77
JIS K 674320 59 26 89.5 125 9725 68 32 101142 9730 80 38 119158129
EFor orders larger than indicated quantity, please check with WOS.
Part Number Weight by Volume (g) Unit PriceType No. 1~20 pcs.
PVCTBN 100 100500 500
Part Number Weight by Volume (g) Unit PriceType No. 1~20 pcs.
PVCHBN 100 100500 500
EFor orders larger than indicated quantity, please check with WOS.
-12932
1293-1294_F51-017_cENG
-12942
1293-1294_F51-017_cENG cENG 2nd
Copper Pipes / Copper Pipe Fittings
Q Copper Pipes
Q Copper Pipe FittingsMale Threaded Connector
Q Copper Pipe FittingsMale Threaded Elbow Connector
M Material: Brass M Material: Brass
Part Number - T
DKPT8 - 2
Part Number - L
DKE10 - 300
25
L25 25D
t
2-C
25
L25 25D
t
2-C
Copper Pipe Fittings
Q Copper Pipe Fittings Union
M Material: Brass
Q Copper Pipe FittingsUnion Elbow Connectors
M Material: Brass
Q Copper Pipe Fittings Union Tees
M Material: Brass M Material: Brass
Q Copper Pipe FittingsMale Threaded Tee
Q Copper Pipe FittingsGland Ring
M Material: Brass
Q Pin-Ring Joints
M Material: Brass
Part Number - T
DKUS3DKUPT8 - 2
Type M Material Standards
DKE Copper Phosphate (C1220) JIS H :3300
Part Number TR (PT) Selection TR (PT) Approx.
L L1 L2 T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKPT
3 1 1/8 28 5 9 1/8 12 122 1/4 32 6 12 1/8 14 12
4 1 1/8 28 5 9 1/8 12 122 1/4 32 6 12 1/8 14 12
5 1 1/8 28 5 9 1/8 12 122 1/4 32 6 12 1/8 14 12
61 1/8 33 6 9 1/4 14 162 1/4 36 6 12 1/4 16 163 3/8 39 8 13 1/4 19 16
81 1/8 33 6 9 1/4 14 162 1/4 36 6 12 1/4 16 163 3/8 39 8 13 1/4 19 16
102 1/4 40 8 12 3/8 19 193 3/8 41 8 13 3/8 19 194 1/2 46 10 16 3/8 22 19
122 1/4 46 10 12 1/2 22 243 3/8 47 10 13 1/2 22 244 1/2 50 10 16 1/2 24 24
14 3 3/8 48 10 13 1/2 22 244 1/2 51 10 16 1/2 24 24
15 3 3/8 50 10 13 5/8 24 274 1/2 54 11 16 5/8 27 27
16 3 3/8 50 10 13 5/8 24 274 1/2 54 11 16 5/8 27 27
Part Number TR (PT) Selection TR(PT) L1
Approx. L2 T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKLPT
3 1 1/8 20 25 1/8 12 122 1/4 25 27 1/8 16 12
4 1 1/8 20 25 1/8 12 122 1/4 25 27 1/8 16 12
5 1 1/8 20 25 1/8 12 122 1/4 25 27 1/8 16 12
61 1/8 22 31 1/4 16 162 1/4 25 31 1/4 16 163 3/8 28 33 1/4 19 16
81 1/8 22 31 1/4 16 162 1/4 25 31 1/4 16 163 3/8 28 33 1/4 19 16
102 1/4 27 35 3/8 19 193 3/8 28 35 3/8 19 194 1/2 34 38 3/8 24 19
122 1/4 30 42 1/2 24 243 3/8 31 42 1/2 24 244 1/2 34 42 1/2 24 24
14 3 3/8 31 43 1/2 24 244 1/2 34 43 1/2 24 24
15 3 3/8 31 45 5/8 24 274 1/2 34 45 5/8 24 27
16 3 3/8 31 45 5/8 24 274 1/2 34 45 5/8 24 27
Part Number L1mm
Incrementt
Unit Price
Type D L10~100
L101~200
L201~400
L401~600
L601~800
L801~1000
DKE
3 10~250
1
-
- -4
10~5005
6
8
10~90010
12
141.5
1510~100016
218
Part Number (L) L1 (L2) T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKUS
3 33 5 14.0 1/8 12 124 33 5 14.0 1/8 12 125 33 5 14.0 1/8 12 126 41 6 17.5 1/4 16 168 41 6 17.5 1/4 16 1610 48 8 20.0 3/8 19 1912 58 10 24.0 1/2 24 2414 60 10 25.0 1/2 24 2415 65 11 27.0 5/8 27 2716 65 11 27.0 5/8 27 27
Part Number (L) T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKUE
3 25 1/8 12 124 25 1/8 12 125 25 1/8 12 126 31 1/4 16 168 31 1/4 16 16
10 35 3/8 19 1912 42 1/2 24 2414 43 1/2 24 2415 45 5/8 24 2716 45 5/8 24 27
Part Number (L) (L1) T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKUT
3 50 25 1/8 12 124 50 25 1/8 12 125 50 25 1/8 12 126 62 31 1/4 16 168 62 31 1/4 16 16
10 70 35 3/8 19 1912 84 42 1/2 24 24
or more or less D L3 6 ± 0.1 ± 0.17 30 ± 0.2 ± 0.231 120 ± 0.3 ± 0.3121 400 ± 0.5 ± 0.5401 1000 ± 0.8 ± 0.8
Q Tolerance for D dimension and L dimension
or more or less CD3 D12 (12.7) 0.3D14 D18 0.5
Q C Dimension
Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 150˚C (No Freezing)
Fitting Specifications Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 150˚C (No Freezing)
Fitting Specifications
LL2 L1
D
T T1DKPT
L2
L1
D
T1
T
DKLPT
Main Body Ring RingNut
Copper Pipe
Pipeor Tube
Pin-RingJoint
RingNut
RingMain Body
Pin-Ring Joint is available when thin metal pipes and hard tubes are used with Copper Pipe Fittings.DP.1294 Set a ring nut and a ring in a joint pipe, insert the pipe into the main body all the way until the pipe end touches the pipe stopper
and tighten the nut by hand. Afterwards use a wrench or a spanner for further tightening. As annealed copper pipes are soft, use Annealed Copper Pipe Fittings, instead of this Ring Type coupling.DP.1296
Part Numberd2 D L L1 L2
Unit Price Volume Discount Rate
Type d1 1 ~ 4 pc(s). 5~20 pcs.
DKPRJ
4 3.0 6.0 15.0 14.0 1.0
6 4.5 8.0 16.0 15.0 1.0 8 6.0 10.0 19.0 17.5 1.5 10 8.0 12.0 22.0 20.0 2.0
EFor orders larger than indicated quantity, please check with WOS.
Part Number D1 L Unit Price Volume Discount RateType Applicable Pipe O.D. D 1 ~ 9 pc(s). 10~20 pcs.
DKRG
3 5 54 6 55 7 5.56 8.5 78 10.5 7.510 12.5 8.512 15 1014 17 1115 18 11.516 19 12
EFor orders larger than indicated quantity, please check with WOS.
d1
d2
L
L1 L2
D
DKPRJ
L
D1D
DKRG
Part Number TR (PT) Selection TR (PT) (L) (L1) L2 T1G (PF) Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKUPT
4 1 1/8 50 25 20 1/8 12 122 1/4 54 27 25 1/8 16 12
5 1 1/8 50 25 20 1/8 12 122 1/4 54 27 25 1/8 16 12
61 1/8 62 31 22 1/4 16 162 1/4 62 31 25 1/4 16 163 3/8 66 33 28 1/4 19 16
81 1/8 62 31 22 1/4 16 162 1/4 62 31 25 1/4 16 163 3/8 66 33 28 1/4 19 16
102 1/4 70 35 27 3/8 19 193 3/8 70 35 28 3/8 19 194 1/2 76 38 34 3/8 24 19
12 3 3/8 84 42 31 1/2 24 244 1/2 84 42 34 1/2 24 24
E The PT thread size marked on the copper pipe fi tting body might be different from actual size.
D
T1
T1T1
D
D
(L1) (L1)
(L1)
(L)
DKUT
(L1)
L2
(L1)
(L)
D
D
T
T1T1
DKUPT
T1 T1
DD
(L2)(L2) L1
(L)
DKUS D
T1
(L)
(L) T1
D
DKUE
Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.
-12952 -12962
Annealed Copper Pipes / Annealed Copper Pipe Fittings
Part Number - L
DKEN8 - 300
Part Number - T
DKNT8DKFGF6
- 2
DKFGF
M Material: Brass
Q Annealed Copper Pipe Fittings - Female Threaded Connector (G Thread Type)
Main Body Flare Nut
DK__ DKENF
Align the coupling body to the copper pipe, end to end, hand tighten the fl are nut, then tighten it securely with using a wrench and an adjustable spanner.
1295-1296_F51-018_cENG1295-1296_F51-018_cENG cENG 2nd
M Material: Copper Phosphate (C1220)
QAnnealed Copper Pipes
DKNT
M Material: Brass
Q Annealed Copper Pipe Fittings - Straight
DKNTL
M Material: Brass
Q Annealed Copper Pipe Fittings - Elbow
Copper Pipe Fittings / Needle Valves for Copper Pipes
Q Copper Pipe Fittings Female Threaded Connector
Q Copper Pipe Fittings Male Threaded Connector (G Thread Type)
Part Number
DKFR3DKVBN8
Part Number TR (PT) (L) L1
T1G (PF)
Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKFR
3 1/8 26 12 1/8 14 124 1/8 26 12 1/8 14 125 1/8 26 12 1/8 14 126 1/4 33 15 1/4 17 168 1/4 33 15 1/4 17 1610 3/8 39 19 3/8 22 1912 1/2 46 22 1/2 27 24
Part Number TG (PF)
A (L) (L1)Square
Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKVBN
6 1/4 35 60 42 12 16
8 1/4 35 60 49 14 16
10 3/8 45 70 58 17 19
12 1/2 55 84 78 23 24
Part Number TG (PF) (L) L1 L2
T1G (PF)
Square Unit PriceType Applicable Pipe O.D. D Main Body Nut
DKPG
3 1/8 25.5 5 6.5 1/8 12 124 1/8 25.5 5 6.5 1/8 12 125 1/8 25.5 5 6.5 1/8 12 126 1/4 32.5 6 8.5 1/4 16 168 1/4 32.5 6 8.5 1/4 16 16
10 3/8 38.0 8 10.0 3/8 19 1912 1/2 46.0 10 12.0 1/2 24 24
QParts and Materials for DKVBN No. Part Name Material
1 Wheel Tightening Nut Free-Cutting Brass
2 Washer JIS G3506 SWRH82A
3 Rotation Indicator JIS H4000 A1070P
4 Handle Aluminum Die Casting
5 Stem Free-Cutting Brass
6 Gland Nut Free-Cutting Brass
7 O-Ring NBR
8 Ring Free-Cutting Brass
9 Ring Nut Free-Cutting Brass
0 Main Body Brass for casting
1
2
3
4
5
6
7
8
9
0
T
(L)
D
T1
L1
DKFR
Q Needle Valves for Copper Pipes
T
TT
D
D
(L1)
(L)
ADKVBN
(L)
L2 L1
D
T T1DKPG
M Material: Brass M Material: Brass
Q Copper Pipe FittingsRing Nut
Q Copper Pipe FittingsLock NutDKRGN
(L)
T1
D
B Wrench Flats
M Material: Brass M Material: Brass
DKRKN
(T)
T1
B Wrench Flats
Part Number T1 (L) B Wrench Flats Unit PriceType Applicable Pipe O.D. D G(PF)
DKRGN
6 1/4 13 168 1/4 14 16
10 3/8 16 1912 1/2 19.5 2415 5/8 21 27
Part Number T1 (T) B Wrench Flats Unit PriceType No. G(PF)
DKRKN
1 1/8 4 122 1/4 5 163 3/8 6 194 1/2 7 24
Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 100˚C (No Freezing)
Fitting Specifications
D
L1L2
(L)
T T1
D
L2
L1
T
T1
D
(L1)(L)
T T1
DK## DKENF
L25 25D
t
2-C0.3
+3 0
45°
Dt
DKENDKENF (End Flare Type)
EDKENF End Flare Type is fl ared only at one end.
<End Flare Type>
25
QD Dimension Tolerance
D Tolerance3~6 ±0.18, 10 ±0.2
EDKEN is shipped unrolled and may arrive a little distorted.EWhen DKEN and Annealed Copper Pipe Fittings are combined, expand the pipe end to 45° using the fl are ring tool.
Part Number LSelection t
DKEN Unit Price DKENF Unit PriceType D L100 L200 L300 L500 L100 L200 L300 L500
DKENDKENF
3 100 200 300
1
- - - - -
4
100 200 300 5005
6
810
Part Number R (PT)T Selection
TR (PT) (L) L1 L2
T1 (UNF)Unify Fine Thread
SquareUnit Price
Type D Main Body Nut
DKNT
6
1 1/8 34 6 9
7/16-20UNF
16 17
2 1/4 37 6 12 16 17
3 3/8 40 8 13 19 17
8
1 1/8 35 6 9
1/2-20UNF
16 19
2 1/4 38 6 12 16 19
3 3/8 41 8 13 19 19
102 1/4 43 8 12
5/8-18UNF
19 22
3 3/8 44 8 13 19 22
4 1/2 49 10 16 22 22
Part Number R (PT)T Selection
TR (PT) L1
Approx. L2
T1 (UNF) Unify Fine Thread
SquareUnit Price
Type D Main Body Nut
DKNTL
6
1 1/8 22 32
7/16-20UNF
16 17
2 1/4 25 32 16 17
3 3/8 28 34 19 17
8
1 1/8 22 33
1/2-20UNF
16 19
2 1/4 25 33 16 19
3 3/8 28 35 19 19
102 1/4 27 38
5/8-18UNF
19 22
3 3/8 28 38 19 22
4 1/2 34 41 24 22
Part Number TG (PF) (L) (L1) T1 (UNF)
Unify Fine ThreadSquare
Unit PriceType D Main Body Nut
DKFGF6 1/4 34 15 7/16-20UNF 17 17
8 1/4 35 15 1/2-20UNF 17 19
10 3/8 42 19 5/8-18UNF 22 22
QFeatures: Suitable for plumbing that requires air tightness such as refrigerant gas pipe.
Applicable Fluids Air, Water, Industrial OilNormal Operating Pressure 3.5MPaMax. Operating Pressure 7.0MPaOperating Temperature Range -20 ~ 150˚C (No Freezing)
Fitting Specifications
Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.
-12972 -12982
1297-1298_F51-019_cENG1297-1298_F51-019_cENG cENG 2nd
Q�Stainless Steel Pipes
Q Stainless Steel Pipe Fittings Connectors
M Material: SUS316
Q�Stainless Steel Pipe Fittings Elbow
M Material: SUS316
Part Number - L
SKE10 - 300
Stainless Steel Pipes / Stainless Steel Pipe Fittings
Part Number - T
SKTGK6SKTGLK9.53
--
34
Type M Material Standards Annealing Gloss
SKHRSUS304
JIS G3459
Atmospheric Annealing Not provided
SKH Bright Annealing (BA Pipe) Provided
SKERSUS316
Atmospheric Annealing Not provided
SKE Bright Annealing (BA Pipe) Provided
Part NumberL 1mm
Increment
Unit Price
Type DSKHR SKH SKER SKE
L20~100 L101~200 L201~300 L301~400 L401~500 L20~100 L101~200 L201~300 L301~400 L401~500 L20~100 L101~200 L201~300 L301~400 L401~500 L20~100 L101~200 L201~300 L301~400 L401~500
SKHR SKH SKER SKE
4
20~500
66.35 (1/4 inch)
89.53 (3/8 inch)
1012
12.7 (1/2 inch)16
Stainless Steel Pipe Fittings
Q�Stainless Steel Pipe Fittings Union
Q Stainless Steel Pipe Fittings Union Elbow Connectors
M Material: SUS316 M Material: SUS316
QFor tightening procedure and structure of fittings, and applicable pipe specification, refer to P.1300.
L
h
F
H
L
L
E
D
D
SKUEK
H
LF
E DD
Lh
SKUSK
Q Stainless Steel Pipe Fittings Union Tees
M Material: SUS316
Q�Stainless Steel Pipe Fittings Reducing Union
M Material: SUS316
L
F1 F
E
HH1
D1
D
Lh
SKUSDK
LL
F
H
E D
L
L
L
Lh
SKUTK
Q Stainless Steel Pipe Fittings Port Connector
M Material: SUS316
Q� Stainless Steel Pipe Fittings Tube Insert
M Material: SUS316
L
D Ad
SKITK
L
L1
E D
SKPCK
E Insert SKITK into tubes for piping Fluororesin Tubes with Stainless Steel Pipe Fittings.
Part NumberD A d L
Unit Price Volume Discount Rate
Type Tube O.D. (mm) 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKITK
4 4 2 1.0 186 5.6 4 3.0 188 7 6 4.8 1910 9 8 6.5 2012 11 10 8 25
Part Number - D1
SKUSK6SKUSDK12.7 - 6.35
EValues in ( ) for D dimension are by inch.
Part NumberL E l1
Unit Price Volume Discount Rate
Type D 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKPCK
3.18 (1/8) 23 1.8 164 26 2.5 196 27 4 20
6.35 (1/4) 27 4.8 208 28 6.4 21
9.53 (3/8) 29 7.6 2210 29 8 2212 37 9.5 26.7
12.7 (1/2) 37 9.9 26.7
L
1.6
1.6 Dt
2-C
±1
( )
D t4 16 1
6.35 (1/4 inch) 18 1 (1.2)
9.53 (3/8 inch) 110 1 (1.5)12 1 (1.5)
12.7 (1/2 inch) 116 1
E Values in ( ) are for t dimension of SKE.
E For tightening procedure and structure of fittings, and applicable pipe specification, refer to P.1300.
H
E
FLT
D
L
h
SKTGK Lh
F
T L
HL1
E D
E1
SKTGLK
Part Number R (PT) T Selection
TR(PT) L L1 E E1 F l
Square Unit Price Volume Discount Rate
Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKTGLK
3.18(1/8)
1 1/8 24.9 22 2.5 5 13.4 18 12 122 1/4 25.9 24 2.5 5 13.4 19 14 12
41 1/8 27.8 22 3.5 5 15.3 20.5 14 142 1/4 27.8 24 3.5 5 15.3 20.5 14 14
6
1 1/8 27.9 22 5 5 15.4 20.5 14 142 1/4 27.9 24 5 5 15.4 20.5 14 143 3/8 28.9 27 5 5 15.4 21.5 17 144 1/2 30.9 35 5 5 15.4 23.5 22 14
6.35(1/4)
1 1/8 27.9 22 5 5 15.4 20.5 14 142 1/4 27.9 24 5 5 15.4 20.5 14 143 3/8 28.9 27 5 5 15.4 21.5 17 14
8
1 1/8 28.8 22 5 5 16.8 21 14 15.92 1/4 28.8 24 6 6 16.8 21 14 15.93 3/8 29.8 27 6 6 16.8 22 17 15.94 1/2 31.8 35 6 6 16.8 24 22 15.9
9.53(3/8)
2 1/4 30.8 27 7.5 7 17.8 23 17 193 3/8 30.8 27 7.5 8 17.8 23 17 194 1/2 32.8 35 7.5 8 17.8 25 22 19
102 1/4 30.8 27 7 7 17.8 23 17 193 3/8 30.8 27 8 8 17.8 23 17 194 1/2 32.8 35 8 8 17.8 25 22 19
122 1/4 35.8 28 7 7 22.8 25 22 233 3/8 35.8 30 9 9 22.8 25 22 234 1/2 35.8 35 10 10 22.8 25 22 23
12.7(1/2)
2 1/4 35.1 28 10 7 22.8 25 22 233 3/8 35.1 30 10 9 22.8 25 22 234 1/2 35.1 35 10 10 22.8 25 22 23
E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.
Part Number R (PT) T Selection
TR(PT) L E F l
Square Unit Price Volume Discount Rate
Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKTGK
3.18(1/8)
1 1/8 32.9 2.5 13.4 26 12 122 1/4 34.9 2.5 13.4 28 14 12
41 1/8 35.8 3.5 15.3 28.5 14 142 1/4 37.8 3.5 15.3 30.5 14 14
6
1 1/8 35.9 5 15.4 28.5 14 142 1/4 37.9 5 15.4 30.5 14 143 3/8 38.9 5 15.4 31.5 17 144 1/2 44.4 5 15.4 37 22 14
6.35(1/4)
1 1/8 35.9 5 15.4 28.5 14 142 1/4 37.9 5 15.4 30.5 14 143 3/8 38.9 5 15.4 31.5 17 14
8
1 1/8 36.8 5 16.8 29 14 15.92 1/4 38.8 6 16.8 31 14 15.93 3/8 39.8 6 16.8 32 17 15.94 1/2 45.3 6 16.8 37.5 22 15.9
9.53(3/8)
2 1/4 39.8 7 17.8 32 17 193 3/8 40.8 7.5 17.8 33 17 194 1/2 46.3 7.5 17.8 38.5 22 19
102 1/4 39.8 7 17.8 32 17 193 3/8 40.8 8 17.8 33 17 194 1/2 46.3 8 17.8 38.5 22 19
122 1/4 42.8 7 22.8 32 22 233 3/8 43.8 9 22.8 33 22 234 1/2 49.3 10 22.8 38.5 22 23
12.7(1/2)
2 1/4 42.8 7 22.8 32 22 233 3/8 43.8 9 22.8 33 22 234 1/2 49.3 10 22.8 38.5 22 23
E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.
Part NumberD1 L E F F1 l
Square Unit Price Volume Discount Rate
Type D Main Body h Nut H Nut H1 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKUSDK
6.35 (1/4) 3.18 (1/8) 40.8 2.5 15.4 13.4 26.5 14 14 126 4 42.7 3.5 15.4 15.3 28 14 14 14
84 43.6 3.5 16.8 15.3 28.5 14 15.87 146 43.7 5 16.8 15.4 28.5 14 15.87 14
9.53 (3/8) 6.35 (1/4) 44.7 5 17.8 15.4 29.5 17 19 14
106 44.7 5 17.8 15.4 29.5 17 19 148 45.6 6 17.8 16.8 30 17 19 15.87
126 47.7 5 22.8 15.4 29.5 22 23 14
10 49.6 8 22.8 17.8 31 22 23 1912.7 (1/2) 6.35 (1/4) 47.7 5 22.8 15.4 29.5 22 23 14
E L and F are dimensions for hand tightening.E Values in ( ) for D and D1 dimension are by inch.
Part NumberL E F l
Square Unit Price Volume Discount Rate
Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKUSK
3.18 (1/8) 37.8 2.5 13.4 24 12 124 42.6 3.5 15.3 28 14 146 42.8 5 15.4 28 14 14
6.35 (1/4) 42.8 5 15.4 28 14 148 44.6 6 16.8 29 14 15.87
9.53 (3/8) 46.6 8 17.8 31 17 1910 46.6 8 17.8 31 17 1912 52.6 10 22.8 31 22 23
12.7 (1/2) 52.6 10 22.8 31 22 23
E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.
Part NumberL E F l
Square Unit Price Volume Discount Rate
Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKUEK
3.18 (1/8) 24.9 2.5 13.4 18 12 124 27.8 3.5 15.3 20.5 14 146 27.9 5 15.4 20.5 14 14
6.35 (1/4) 27.9 5 15.4 20.5 14 148 28.8 6 16.8 21 14 15.87
9.53 (3/8) 30.8 8 17.8 23 17 1910 30.8 8 17.8 23 17 1912 34.8 10 22.8 24 22 23
12.7 (1/2) 34.8 10 22.8 24 22 23
E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.
Part NumberL E F l
Square Unit Price Volume Discount Rate
Type D Main Body h Nut H 1 ~ 9 pc(s). 10 ~ 30 pcs.
SKUTK
3.18 (1/8) 24.9 2.5 13.4 18 12 124 27.8 3.5 15.3 20.5 14 146 27.9 5 15.4 20.5 14 14
6.35 (1/4) 27.9 5 15.4 20.5 14 148 29.4 6 16.8 22 14 15.87
9.53 (3/8) 30.8 8 17.8 23 17 1910 30.8 8 17.8 23 17 1912 38.3 10 22.8 27.5 22 23
12.7 (1/2) 38.3 10 22.8 27.5 22 23
E L and F are dimensions for hand tightening.E Values in ( ) for D dimension are by inch.
Part Number - L
OST8 - 250
Q Swaged Sleeve Fittings for Hydraulics Reducers
Q Swaged Sleeve Fittings for Hydraulics Reverse Flow Prevention Union
Type MMaterial SSurface Treatment
KTGREMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
Type MMaterial SSurface Treatment
KTGZRMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
Q Swaged Sleeve Fittings for Hydraulics Reverse Flow Prevention Connectors
Type MMaterial SSurface Treatment
KTGZCMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
Part Number
KTGS8-1KTGR6
Q Swaged Sleeve Fittings for Hydraulics Sleeve
Q Swaged Sleeve Fittings for Hydraulics Nut
Type MMaterial SSurface TreatmentKTGSL Carbon Steel Trivalent Chromate
Type MMaterial SSurface TreatmentKTGNT S25C Trivalent Chromate
1301-1302_F51-021_cENG1301-1302_F51-021_cENG cENG 2nd
Steel Pipes for Hydraulics / Swaged Sleeve Fittings for Hydraulics
QSteel Pipes for Hydraulics
L±125
D±
0.1
t
2-C0.2
25
25OST
M Material: OST-2 (STPS-2 (JIS B2351))
Q Swaged Sleeve Fittings for Hydraulics Connectors
Q Swaged Sleeve Fittings for Hydraulics Elbow Nipples
Type MMaterial SSurface Treatment
KTGSMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
FL
DE
HT G LH1
Type MMaterial SSurface Treatment
KTGEMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
Q Swaged Sleeve Fittings for Hydraulics Union
Q Swaged Sleeve Fittings for Hydraulics Elbow
Q Swaged Sleeve Fittings for Hydraulics Tee
Type MMaterial SSurface Treatment
KTGRMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
Type MMaterial SSurface Treatment
KTGLBMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
Type MMaterial SSurface Treatment
KTGTEMain Body‚ Nut: S25C Trivalent ChromateSleeve : Carbon Steel -
LH H1
DE
L
F
DE
L
L
Lh
H
L
F
LHH1
DA1 E
L
F
F
L
D
LHH1
D
FL
LHH1G
T
L
A
H
TL
D
L
TH
FL
h
E D
GL1
E1
No.6-1, 8-1, 8A-3, 10A-4, 15A-6
L
Fl
E D
GL 1
h
HTE1
Others
No.6
DE
L
L H
L
F
h
No.8, 10
L
L
E D
h
H
lF
QFeatures: Fitting with a built-in reverse fl ow prevention structure.
Part Number Applicable Pipe O.D.
D
Rating Flowl/min
Cracking Pressure
MPa
TR(PT)
Position of Gauge
Dia. G
Hex SocketF l
Tightening by Hand
Approx. L
Unit Price Volume Discount Rate
Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGZC
10-0510 18
0.051/4 6.01 24 19 7 53 58.5
10-45 0.45
12-0512 18
0.053/8 6.35 24 22 7 55 60
12-45 0.45
Part NumberA l
Unit Price Volume Discount Rate
Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGSL
6 6 14
8 8 14
10 10 15
12 12 15
Part NumberD T H Hex
Socket LUnit Price Volume
Discount Rate
Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGNT
6 7.3 M12x1.5 14 15
8 9.3 M14x1.5 17 15
10 11.3 M16x1.5 19 16
12 13.3 M18x1.5 22 16
Part Number L 1mm Increment t
Unit Price 1 ~ 4 pc(s).Type D L20~250 L251~500 L501~750 L751~1000 L1001~1500
OST6
20~1500
1.08 1.0
10 1.2 12 1.5
[Disassembly / Retightening]• Can be disassembled just by loosening the nut. However, never tighten and loosen the nut while
pressurized as it is very dangerous.• 8 or more disassemblies and retightening are possible by
following the Full Tightening Procedure as shown in (2).
Fitting BodySleeve
Nut
Pipe
E Make sure that the tapered end of the sleeve is facing the fi tting body.
If inserted backwards, pipe will not be properly swaged and may pull-off.
Swaged Sleeve Fittings are composed of a main body, a sleeve and a nut.[Tightening Procedure]For utilizing performance of Swaged Sleeve Fittings for Steel Pipes, use of appropriate pipe and accurate tightening of fi tting are required. The following pre-tightening will make plumbing smooth and secure.(1) Pre-tightening1 Insert the pipe with nut and sleeve inserted as shown in right fi gure into the fi tting
body. Make sure that pipe end contacts abutment part. Inadequate swaging due to the inadequate tightening may cause the pipe to pull out.
2Tighten the nut by hand.3 Tighten the nut with a wrench while rotating the pipe to the end of its rotation. Put a
mark on this position of fi tting body and the nut.4 Further tighten the nut by a wrench with1-1/4 turn at this mark.5Loosen the nut once to see the state of the sleeve in order to confi rm the following. 1) There is some millimeter distance between pipe end and sleeve end. 2) No substantial movement of the sleeve toward the direction of pipe axis is allowable.
Moving toward circumferential direction is acceptable.(2) Full Tightening
Attach the pre-tightened pipe with fi tting body and tighten the nut by a wrench until you feel sudden resistance. Further tighten the nut by 1/4 turn, and tightening will be done.
Structure and Tightening Procedure of Swaged Sleeve Fittings
[Applicable Pipes](1) JIS G 3454 Carbon Steel Pipe for Pressure Service STPG370(2) JIS G 3455 Carbon Steel Pipe for High Pressure Service STP370(3) JIS G 3456 Carbon Steel Pipe for High Temperature Service STP370(4) JIS G 3459 Stainless Steel Pipe for Plumbing SUS304TP and SUS316TP(5) Japan Fluid Power Association Standard JOHS-102 Accurate Carbon Steel Pipes for Hydraulics OST
Applicable Pipe Dia. Max. Operating Pressure Operating Temperature Range
8mm 8
50MPa
-20°C~250°C
6A 10.5
10,12mm 10,12
8A 13.8
10A 17.340MPa
15A 21.7
Applicable Pipe Dia. Max. Operating Pressure Operating Temperature Range
10•12mm 10,12 3MPa -20°C~120°C
• Specifications (Other Than Above)
• Specifications (KTGZR / KTGZC)
E Use No.6A, 8A, 10A, 15A with the same No. of SUT#, STPG# (P.1265). Sleeves of No.6A, 8A, 10A, 15A is different from those for KTGSL (P.1302). No. 8, 10 and 12 have approx. 1.4mm protrusion for improving pressure resistance.
Part Number Applicable Pipe O.D. D
TR(PT) E Reference
Dia. GTightening by
Hand Approx. LHex Socket F l
Unit Price Volume Discount Rate
Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGS
6-1 6 1/8 4 3.97 34.5 14 14 7 286-2 6 1/4 4 6.01 37.5 17 14 7 338-1 8 1/8 4 3.97 35.5 17 17 7 298-2 8 1/4 6 6.01 37.5 17 17 7 3310-2 10 1/4 7 6.01 38.5 17 19 7 3310-3 10 3/8 8 6.35 39.0 19 19 7 3412-2 12 1/4 7 6.01 38.5 19 22 7 336A-2 10.5 1/4 7 6.01 34.5 17 19 7 338A-3 13.8 3/8 9 6.35 40 22 24 7.5 3710A-4 17.3 1/2 12 8.16 44.5 27 32 8 4115A-6 21.7 3/4 16 9.53 48 32 36 9 45
E Use No.8A, 10A, 15A with the same No. of SUT#, STPG# (P.1265). Sleeves of No.8A, 10A, 15A is different from those for KTGSL (P.1302). No. 8 has approx. 1.4mm protrusion for improving pressure resistance.
Part Number Applicable Pipe O.D. D
TR(PT) E E1
Reference Dia. G
Tightening by Hand Approx. L L1
Wrench Flats h
Hex Socket H F L
Unit Price Volume Discount Rate
Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGE
6-1 6 1/8 4 4 3.97 30.5 14 14 14 7 206-2 6 1/4 4 4.5 6.01 33.5 17 17 14 7 238-1 8 1/8 6 4 3.97 33.5 16 17 17 7 238-2 8 1/4 6 7 6.01 33.5 18 17 17 7 23
10-2 10 1/4 8 7 6.01 34.5 19 17 19 7 2310-3 10 3/8 8 9 6.35 35.5 19.5 19 19 7 2412-2 12 1/4 10 7 6.01 35.5 20.5 19 22 7 248A-3 13.8 3/8 11 9 6.35 40 22.5 22 24 7.5 2810A-4 17.3 1/2 14 12 8.16 44.5 30 27 32 8 3215A-6 21.7 3/4 18 16 9.53 46.5 32.5 32 36 9 34
Part Number Applicable Pipe O.D.
DE
Hex SocketF l
Tightening by Hand
Approx. L
Unit Price Volume Discount Rate
Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGR
6 6 4 14 14 7 30 51
8 8 6 17 17 7 31 52
10 10 8 17 19 7 31 54
12 12 10 19 22 7 31 54
Part Number Applicable Pipe O.D. D E Wrench
Flats hHex
Socket H F LTightening by Hand
Approx. L
Unit Price Volume Discount Rate
Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGLB6 6 4 14 14 7 20 30.58 8 6 17 17 7 23 33.5
10 10 8 17 19 7 23 34.5
Part Number Applicable Pipe O.D.
DE Wrench
Flats h
Hex Socket
HF l
Tightening by Hand
Approx. L
Unit Price Volume Discount Rate
Type No. 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGTE
6 6 4 14 14 7 20 30.5
8 8 6 17 17 7 23 33.5
10 10 8 17 19 7 23 34.5
12 12 10 19 22 7 24 35.5
Part Number Applicable Nominal Dia. of Fitting A1
Applicable Pipe O.D.
DE
Hex SocketF l
Tightening by Hand
Approx. L
Unit Price Volume Discount Rate
Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGRE
8-6 8 6 4 14 14 7 39 49.5
10-6 10 6 4 14 14 7 40 50.5
10-8 10 8 6 17 17 7 40 50.5
12-6 12 6 4 14 14 7 41 51.5
12-8 12 8 6 17 17 7 41 51.5
12-10 12 10 8 17 19 7 41 52.5
Part Number Applicable Pipe O.D.
D
Rating Flowl/min
Cracking Pressure
MPa
Hex SocketF l
Tightening by Hand
Approx. L
Unit Price Volume Discount Rate
Type No. H1 H 1 ~ 9 pc(s). 10 ~ 30 pcs.
KTGZR
10-0510 18
0.0524 19 7 49 72
10-45 0.45
12-0512 18
0.0524 22 7 51 74
12-45 0.45
QFeatures: Fitting with a built-in reverse fl ow prevention structure.
-13012 -13022