8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
1/234
AlcatelLucent TCO SuiteSWP TCO SUITE Rel.1.7
for 9400AWY R.2.0 V2.0.6 and 9400AWY R.2.1 V2.1.2 & V2.1.3
User Manual3DB 75003 BAAA
Ed.01
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
2/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
2/232 3DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
i Navigation principles
This manual is delivered to Customers in electronic format only (file Adobe Acrobat pdf) inside the specific
SWP TCO SUITE Rel.1.7 CDROM.
This file can be used both in PC and Unix WS environments or any other environment for which a suitable
Acrobat Reader has been envisaged by Adobe.
In particular take into account that, in order to open correctly this pdf file, the use of Acrobat Reader Version
5.0 at least is mandatory. If opened with previous versions of Adobe Acrobat Reader, incomplete
document views will be produced.
For a comfortable navigation, two hyperlink types are present:
those inside the text window, marked by a blue rectangle around any crossreference to a figure,
table, part, section, chapter, paragraph, numbered list, and page: by clicking such a blue rectangle,
you are led to the referenced component
the bookmarks, present on the left side of the text window. They represent the online handbook
table of contents. Bookmarks can be expanded (clicking on [+]) or reduced (clicking on []). By
clicking on one bookmark, you are led to the referenced part.
WARNING: the bookmark window is not visible if you use Acrobat reader in fullscreen modality.
For further information, refer to Acrobat reader help online.
If printed on paper by Users, it is suggested to divide this manual by numbered separators, for an easier
access to the information herein contained:
CONTENTS SEPARATOR
FRONT MATTER ii Preliminary information
iii Structure of this manual
iv Notes on present edition
V Table of contents
SECTION1 : TCO SUITE DESCRIPTION AND USAGE 1
SECTION2 : APPENDICES 2
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
3/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
3/2323DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
ii Preliminary information
a ) Warranty
Any warranty must be referred exclusively to the terms of the contract of sale of the equipment to
which this handbook refers to.
AlcatelLucent makes no warranty of any kind with regards to this manual, and specifically disclaims
the implied warranties of merchantability and fitness for a particular purpose. AlcatelLucent will not
be liable for errors contained herein or for damages, whether direct, indirect, consequential,
incidental, or special, in connection with the furnishing, performance, or use of this material.
b ) Information
The product specification and/or performance levels contained in this document are for information
purposes only and are subject to change without notice. They do not represent any obligation on the
part of AlcatelLucent.
c ) Copyright Notification
The technical information of this manual is the property of AlcatelLucent and must not be copied,
reproduced or disclosed to a third party without written consent.
d ) Safety recommendations
The safety recommendations here below must be considered to avoid injuries on persons and/or
damage to the equipment:
1 ) Service Personnel
Installation and service must be carried out by authorized persons having appropriate technical
training and experience necessary to be aware of hazardous operations during installation andservice, so as to prevent any personal injury or danger to other persons, as well as prevent
damaging the equipment.
2 ) Access to the Equipment
Access to the Equipment in use must be restricted to Service Personnel only.
3 ) Safety Rules
Recommended safety rules are indicated in the NE User Manual (see Tab. 1. on page 14 )
e ) Cautions to avoid equipment damage
Please refer to the NE User Manual (see Tab. 1. on page 14 )
f ) Service Personnel skill
Service Personnel must have an adequate technical background on telecommunications and in
particular on the AlcatelLucent 9400AWY Network Elements specified in Tab. 1. on page 14
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
4/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
4/232 3DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
iii Structure of this manual
Information in this manual is divided into the following parts:
a ) Front matter
This part, with general information, and table of contents.b ) SECTION1 : TCO SUITE DESCRIPTION AND USAGEfrom page 11
This section describes the SWP TCO SUITE Rel.1.7 and its most frequently used functions.
c ) SECTION2:APPENDICESfrom page 183
This section describes the less frequently used functions of the SWP TCO SUITE Rel.1.7, and
provides additional information.
d ) Handbook print and assembly instructions
This part (after handbook last page232 ): is not present in the handbook paper copy, if supplied by AlcatelLucent factory.
is present in the pdf file. Customer can use it to print and assembly the handbook in the same
way that can be done by AlcatelLucent factory.
iv Notes on present edition
ED.01 is the first validated and released edition associated to SWP TCO SUITE Rel.1.7.
a ) WARNING ABOUT SWP VERSION:
The SWP TCO SUITE version is written on the SWP CDROM you own, and that contain this
manual
The SWP TCO SUITE Rel.1.7 is meant to be used only with the AlcatelLucent 9400AWY
Network Elements specified in the column NEof Tab. 1. on page 14
In whole Manual (and if not differently specified), for SWP TCO SUITE it is always meant SWP
TCO SUITE Rel.1.7
If you have a SWP TCO SUITE version different from 1.7 , do not use this manual, but that
specific for such a version.
This manual is validated in conjunction with SWP TCO SUITE version 1.7 only. Information
relevant to SWP versions different from 1.7 , if any, must be considered preliminary, subject to
change and without any obligation on the part of AlcatelLucent.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
5/234
Allrightsreserved.
Passingonandcopyingofthis
document,useandcommunicationofitsc
ontentsnot
p
ermittedwithoutwrittenauthorizationfromAlcatelLucent
5/2323DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
v Table of contents
i Navigation principles 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii Preliminary information 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iii Structure of this manual 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv Notes on present edition 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 1: TCO SUITE DESCRIPTION AND USAGE 11. . . . . . . . . . . . . . . . . . . .
11 SWP TCO SUITE SCOPES AND REQUIREMENTS 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1 SWP TCO SUITE scopes, usability, features, and distribution to Customers 13. . . . .
11.2 SWP TCO SUITE User Manual scope, distribution to Customers, and associated
documentation 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.3 PC requirements to run and install the SWP TCO SUITE 15. . . . . . . . . . . . . . . . . . . . . . .
11.4 PC Administrator privileges requirements to install and deinstall the SWP TCO
SUITE components 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 ITEMS FOR SW DISTRIBUTION TO CUSTOMERS 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.1 Items for SW distribution to Customers 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2 SWP TCO SUITE CDROM description 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2.1 SWP TCO SUITE CDROM part number 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2.2 SWP TCO SUITE CDROM contents 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2.3 Additional requirements for the use of the SWP TCO SUITE 21. . . . . . . . . . . . . . . . . . .
12.3 Notes on SWP CDROM identification, and Product Release Note 22. . . . . . . . . . . . . .
13 CONNECTIONS BETWEEN THE CRAFT TERMINAL AND THE NE, AND SECURITY
POLICY 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.1 Types of physical access from the PC to the NE 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.2 PCNE network addressing rules 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.2.1 NEs management interfaces 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.2.2 NEs local IP address and Ethernet Configuration IP address 28. . . . . . . . . . . . . . . .
13.2.3 NE reachability from the CT 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.2.4 Networking scenarios for PC connection to the NEs local IP address 30. . . . . . . . . . .
13.3 Security 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3.1 Summary of security features 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3.2 Security by operator profile 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3.3 Security by community string 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3.4 Security by access lists 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14 GETTING STARTED 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.1 Preparation of the Craft Terminal based on SWP TCO SUITE 37. . . . . . . . . . . . . . . . . . .
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
6/234
Allrightsreserved.
Passingonandcopyingofthis
document,useandcommunicationofitsc
ontentsnot
p
ermittedwithoutwrittenauthorizationfromAlcatelLucent
6/232 3DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
14.2 Equipment SW management by SWP TCO SUITE 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.2.1 Flash Card 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.2.2 Procedures for the management of the NE software 41. . . . . . . . . . . . . . . . . . . . . . . . . .
14.3 Startup and functions of the TCO SUITE Main Menu screen 46. . . . . . . . . . . . . . . . . . .
14.4 Checks the operator must do before accessing a NE 48. . . . . . . . . . . . . . . . . . . . . . . . . .14.5 Common behavior of NE login, and application logoff, for the NEinteractive
Provisioning Tool and Alarms & Settings 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.5.1 Constraints and preliminary checks 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.5.2 NE login procedure 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.5.3 Application logoff procedure 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.6 Close Current Session 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.7 Operational & Maintenance WebEML 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.8 Operational & Maintenance 1320CT 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15 PROVISIONING TOOL 59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16 ALARMS & SETTINGS 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.1 Alarms & Settings overview, startup, and closing 65. . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2 Alarms & Settings functions 66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.1 Date & Time Setting 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.2 Configuration Setting 69. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.3 Configuration Info 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.4 Get Configuration File 75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.5 Active Alarms 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.6 Power Measurement 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.7 Modem Speed 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.8 Licence Info 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.9 NAT Option 79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17 ACCEPTANCE TOOL 83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.1 Acceptance Tool scope 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.2 Acceptance Tool start 85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.3 Acceptance Tool in NEinteractive modality 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.3.1 Bench setup and startup of the NEinteractive Acceptance Tool 86. . . . . . . . . . . . . .17.3.2 Main functions of the NEinteractive Acceptance Tool 88. . . . . . . . . . . . . . . . . . . . . . . . .
17.3.3 Create Report 90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.4 Acceptance Tool in not NEinteractive modality (offline) 96. . . . . . . . . . . . . . . . . . . . . . .
18 NETO (NETWORK ELEMENT OVERVIEW) 97. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1 General on NEtO 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1.1 NEtO functions 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1.2 NEtO sessions and constraints 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.2 NE access constraints 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.3 Summary of actions 99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.3.1 Preliminary operations 99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
7/234
Allrightsreserved.
Passingonandcopyingofthis
document,useandcommunicationofitsc
ontentsnot
p
ermittedwithoutwrittenauthorizationfromAlcatelLucent
7/2323DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
18.3.2 Operations with NEtO 100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.4 Details on NEtO screen 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.4.1 Supervision Function 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.4.2 Supervision and Alarm Synthesis roundshaped icons 105. . . . . . . . . . . . . . . . . . . . . . . .
18.4.3 NEtO screen minimize and restore 106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.4.4 NEtO icon in the tray bar 106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18.4.5 NE Configuration 107. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.4.6 Command Buttons 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.4.7 How to close the NEtO session 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.5 NE list management 109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 9400AWY WEBEML 111. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.1 How to open the 9400AWY NE WebEML main view 113. . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.2 9400AWY main view organization 114. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.3 View Area 115. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19.3.1 Resource Tree Area and Selection Criteria 116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.3.2 Resource Detail Area 116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.4 Main tool bar 117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.5 Severity alarm synthesis, and Domain alarm synthesis 118. . . . . . . . . . . . . . . . . . . . . . . .
19.6 Management state control panel 119. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.7 Access state (allow or inhibit NE Craft Terminal access) 120. . . . . . . . . . . . . . . . . . . . . . .
19.7.1 Switching from the OS to the Craft Terminal access state 120. . . . . . . . . . . . . . . . . . . . . .
19.7.2 Switching from the Craft Terminal access state back to the OS access state 120. . . . .
19.8 Introduction to the WebEML menu commands 121. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.1 Security by operator profile 121. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.2 Menu organization 124. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.3 Command button policy 124. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.4 Help menu 125. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.5 Views menu 126. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.6 Configuration menu 130. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.7 Diagnosis menu 131. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.8 Supervision menu 132. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.8.9 SW download menu 133. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110 ALARMS MONITOR AND EVENT LOG BROWSER 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.1 Log switch 136. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2 Alarms Monitor 136. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.1 Alarms Monitor functions 136. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.2 Alarms Monitor startup for one single NE 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.3 Alarms Monitor Overview 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.4 Multiple NE Alarms Monitor 141. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.5 Filters menu 142. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.6 File Menu 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.7 Printing the alarms and logs 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.8 Exporting the alarms and logs 146. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110.2.9 Navigate from AM to USM 147. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.10 Navigate from USM to AM 148. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.2.11 Shortcut icons 149. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
8/234
Allrightsreserved.
Passingonandcopyingofthis
document,useandcommunicationofitsc
ontentsnot
p
ermittedwithoutwrittenauthorizationfromAlcatelLucent
8/232 3DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
110.3 Event Log Browser (ELB) 151. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.3.1 ELB scope 151. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.3.2 ELB startup 151. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110.3.3 Event Log Table screen 152. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111 MIB MANAGEMENT 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111.1 Default repository folders of MIB backup files 156. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111.2 Craft Terminal commands for the management of MIB backup files 156. . . . . . . . . . .
111.3 How to perform the MIB backup 157. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111.4 How to perform the MIB restore 158. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111.5 How to remove a MIB backup file from the repository folder 160. . . . . . . . . . . . . . . . .
112 NE SWP UPGRADE 161. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.1 Introduction and restrictions 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.2 Case of upgrade to 9400AWY V2.0.6 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.3 Case of upgrade to 9400AWY V2.1.2 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.4 Case of upgrade to 9400AWY V2.1.3 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.5 Only for upgrade to 9400AWY V2.0.6 or V2.1.2: how to perform, by WebEML,
the SWP download to the NE, and its activation 163. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.5.1 CT startup, and check for the availability of the SWP to be downloaded 164. . . . . . .
112.5.2 NE login and initial operations (stations A and B) 164. . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.5.3 SW download to the NE (station A) 165. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.5.4 Activation of the new Software Package on the NE (station A) 170. . . . . . . . . . . . . . . .112.5.5 Additional operation for upgrade from older versions (station A) 172. . . . . . . . . . . . . . .
112.5.6 Operations on station B 172. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.5.7 Functional checks on the radio link (stations A and B) 172. . . . . . . . . . . . . . . . . . . . . . . .
112.5.8 NE data backup (stations A and B) 172. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
112.6 Notes about NE SW downgrade 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
113 MANAGEMENT OF THE SECURITY FEATURES 175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
113.1 Management of security by operator profiles 175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
113.2 Management of security by community string 178. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
113.3 Management of security by access lists 180. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 2: APPENDICES 183. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 APPENDIX A: PREPARATION OF THE CRAFT TERMINAL BASED ON SWP TCO SUITE
185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21.1 Operations sequence 185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21.2 Functions of the other buttons of the Advanced Settings screen 189. . . . . . . . . . . . . . .
21.3 Note about TCO SUITE previous versions 189. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22 APPENDIX B: JRE INSTALLATION AND SWP TCO SUITE STARTUP 191. . . . . . . . . . . . . . .
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
9/234
Allrightsreserved.
Passingonandcopyingofthis
document,useandcommunicationofitsc
ontentsnot
p
ermittedwithoutwrittenauthorizationfromAlcatelLucent
9/2323DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
22.1 Need for JRE installation 191. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22.2 Standard behavior of SWP TCO SUITE startup 192. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22.3 Manual installation of Java JRE Package 193. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22.4 Special conditions of SWP TCO SUITE startup 195. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23 APPENDIX C: LLMAN INSTALLATION, CONFIGURATION AND USE 201. . . . . . . . . . . . . . . . .
23.1 Foreword 201. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.2 Important warnings 201. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.3 Procedure summary 202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.4 Installation of LLMAN from the SWP TCO SUITE CDROM 203. . . . . . . . . . . . . . . . . . . . .
23.4.1 Operations sequence 203. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.4.2 Functions and helps available after the LLMAN installation 206. . . . . . . . . . . . . . . . . . . . .
23.5 Installation and configuration of a Virtual Network adapter for LLMAN 207. . . . . . . . . .23.5.1 Foreword 207. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.5.2 Operations sequence, according to Windows platform 208. . . . . . . . . . . . . . . . . . . . . . . . .
23.6 Lower Layer settings 210. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.7 Check/set the Network Connections order 212. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.8 How to start and use the LLMAN application 213. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.8.1 LLMAN startup with 1320CT 214. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.8.2 LLMAN startup with WebEML 214. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23.8.3 Full information regarding the use of the LLMAN application 216. . . . . . . . . . . . . . . . . . .
24 APPENDIX D: ECTEQUIPMENT CONNECTION VIA PUBLIC SWITCHED TELEPHONE
NETWORK 217. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.1 Introduction 217. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.2 Certified equipment 218. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.3 Connection cables 219. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.4 Modem setting 220. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.4.1 Setting of Sportster Flash Modem & 3Com 56K Faxmodem 220. . . . . . . . . . . . . . . . . . . .
24.4.2 TD32 AC Modem setting 222. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.5 PC laptop Dell Latitude setting 223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.6 Setting up the connection 224. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.7 Changing the ECTequipment connection speed 225. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.7.1 Introduction 225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.7.2 Configuration at NE side 225. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24.7.3 Configuration at PC side 226. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25 APPENDIX E: SWP TCO SUITE REL.1.7 DEINSTALLATION 227. . . . . . . . . . . . . . . . . . . . . . . .
26 APPENDIX F: CUSTOMER DOCUMENTATION FEEDBACK 229. . . . . . . . . . . . . . . . . . . . . . . . .
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
10/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
10/232 3DB 75003 BAAA Ed.01
USER MANUALFRONT MATTER
SWP TCO SUITE Rel.1.7
a ) END OF SECTION
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
11/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
11/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
SECTION 1: TCO SUITE DESCRIPTION AND USAGE
This section describes the SWP TCO SUITE and its most frequently used functions.
The less frequently used functions of the SWP TCO SUITE are described in the SECTION 2 from page
183
SECTION CONTENT PAGE
INTRODUCTIVE DESCRIPTIONS
Chapter11 SWP TCO SUITE scopes and requirementsIt sums up the scopes of the SWP TCO SUITE, and describes the scopes of thismanual, and the system requirements necessary to run the SWP TCO SUITE
13
Chapter12 Items for SW distribution to CustomersIt describes the items foreseen for the system SW (that resident inside theequipment, and that for the NE management).
17
Chapter 13 Connections between the Craft Terminal and the NE, andsecurity policyIt describes the types of physical access and the rules to observe (network
addresses and security) , to configure and allow the access from the SWP TCOSUITEbased Craft Terminal to the NE.
23
OPERATIVE DESCRIPTIONS
Chapter14 Getting startedIt gives the basic information for the use of the SWP TCO SUITE: preparation ofthe Craft Terminal, summary of equipment SW management procedures, startupand functions of the Main Menu screen.
37
Chapter15 Provisioning toolIt describes in detail the functions of the Main Menus Provisioning Tool.
59
Chapter16 Alarms & SettingsIt describes in detail the Main MenusAlarms & Settings functions. 65
Chapter17 Acceptance ToolIt describes in detail the functions of the Main Menus Acceptance Tool.
83
Chapter18 NEtO (Network Element Overview)
It describes in detail the functions of NEtO97
Chapter19 9400AWY WebEMLIt describes in detail the organization and the functions of the WebEML (Craft
Terminal).
111
OPERATIVE DESCRIPTIONS continues ...
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
12/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
12/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
SECTION CONTENT PAGE
... continues OPERATIVE DESCRIPTIONS
Chapter110 Alarms Monitor and Event Log BrowserIt describes in detail the functions of Alarms Monitor and Event Log Browser
embedded in NEtO application
135
Chapter111 MIB ManagementIt describes how to perform the NE MIB backup and restore operations
155
Chapter112 NE SWP upgradeIt describes how to upgrade to a new SWP any 9400AWY Rel.2.x NE, presentlyrunning with a previous SWP.
161
Chapter113 Management of the security featuresIt describes how to manage the security features of 9400AWY (by operator profile,by community string, and by access lists).
175
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
13/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
13/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
11 SWP TCO SUITE SCOPES AND REQUIREMENTS
This chapter sums up the scopes of the SWP TCO SUITE, describes the scopes of this manual, and
describes the PC requirements necessary to run the SWP TCO SUITE
Subject On page
SWP TCO SUITE scopes, usability, features,and distribution to Customers below
SWP TCO SUITE User Manual scope, distribution to Customers, and associated
documentation14
PC requirements to run and install the SWP TCO SUITE 15
PC Administrator privileges requirements to install and uninstall the SWP TCO
SUITE components16
11.1 SWP TCO SUITE scopes, usability, features, and distribution to
Customers
[1] SWP scopes
The main objective of the SWP TCO SUITE is to offer, to Customers working with AlcatelLucent
9400AWY Rel.2.0 and Rel.2.1 radio transmission products, new management features, with no need
to update the NEresident software, or to update the existing NEspecific SWP CDROM.
[2] SWP usability
The use of all features of the SWP TCO SUITE is allowed with the AlcatelLucent 9400AWY Network
Elements running with:
SWP 9400AWY R.2.0 V2.0.6 SWP 9400AWY R.2.1 V2.1.2
SWP 9400AWY R.2.1 V2.1.3
[3] SWP features for 9400AWY V2.0.6 and V2.1.2 NE management
With respect to the NE SW management tools:
embedded TCO Suite
1320CTbased Craft Terminal
included in the:
SWP 9400AWY R.2.0 V2.0.6 CDROM
SWP 9400AWY R.2.1 V2.1.2 CDROM
the SWP TCO SUITE provides the following features:
full Microsoft Windows Vistatsupport
new fullJava NEtO (Network Element Overview), replacing the functions of the NES (Network
Element Synthesis)
new fullJava WebEML (Craft Terminal), replacing the functions of the 1320CT
N.B. to avoid problems to the users of the NE SW management tools included in the
NEspecific SWP CDROM listed above, this new WebEML maintains the same
structure (main view, menu bar, screens organization, parameter name and position,
etc) with a few differences, described in this manual.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
14/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
14/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
[4] SWP features for 9400AWY V2.1.3 NE management
Differently from 9400AWY NE running with V2.0.6 or V2.1.2, the 9400AWY NE running with V2.1.3
has no 1320CTbased Craft Terminal management tools.
The 9400AWY NE running with V2.1.3 can be managed only by the SWP TCO SUITE.
[5] SWP distribution to Customers
The SWP TCO SUITE is a standalone product delivered on a specific CDROM.
11.2 SWP TCO SUITE User Manual scope, distribution to Customers, and
associated documentation
[1] SWP TCO SUITE User Manual scope
The specific NE User Manual (Tab. 1. on page 14 ) gives all information regarding:
the NE, from system and hardware points of view
the NE SW management tools included in the specific SWP NE CDROM (only for
V2.0.6 and V2.1.2), supplied with the NE equipment
The scope of this SWP TCO SUITE User Manual is to provide, in a way as concise as possible,only the description of features of the SWP TCO SUITEs NE SW management tools, that are
different from those of the SWP NE CDROM cited above (with some exceptions).
WARNING: this SWP TCO SUITE User Manual:
does not give detailed information regarding the NE
does not include detailed information that is already present in the specific NE User
Manual, and for which there are no operative differences at NE SW management level.
Therefore, to retrieve NEspecific information, or any other information referenced to in the
following, this SWP TCO SUITE User Manual must be always used together with the specific
NE User Manual having the P/N specified in Tab. 1. on page 14 .
[2] SWP TCO SUITE User Manual distribution to Customers
This manual is delivered to Customers in electronic format only (file Adobe Acrobattpdf) inside the
specific SWP TCO SUITE CDROM.
[3] Associated documentation
Tab. 1. 9400AWY NEs and associated User Manuals
NE and Manual P/N of the NE User Manual
9400AWY R.2.0 V2.0.6 User Manual 3DB06687LAAA
9400AWY R.2.1 V2.1.2 User Manual 3DB16142GAAA
9400AWY R.2.1 V2.1.3 User Manual 3DB16142JAAA
Notes:
The specific NE User Manual is present in a documentation CDROM automatically delivered
to Customer together with the equipment it refers to (one copy for each terminal).
In some cases, depending on the Edition of the NE User Manual, the cross references to it,
specified in this manual (section_name, chapter_name, paragraph_name), could not
correspond exactly to the referenced part. In this case, you can find the cross referenced
information in another part of the specific NE User Manual.
in the following of this manual, when a generic reference to the NE User Manual is specified,
you must obviously use that corresponding to the specific NE you are working with.
For further information on the 9400AWY documentation set and additional documents (if any), please
refer to the documentation CDROM containing the specific NE User Manual.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
15/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
15/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
11.3 PC requirements to run and install the SWP TCO SUITE
To run and install (if required) all functions of the SWP TCO SUITE, a PC meeting these requirements is
necessary:
1 ) HW Configuration (minimum requirements)
CPU: Pentium III 850 MHz
RAM: 512 Mbytes (1 Gbytes suggested for Windows Vista)
Hard Disk space: 4 Gbytes
Display Resolution: 1024x768 pixel
CDROM Drive: 24X
Communication Interfaces:
Ethernet Card 10/100 Mbits/sec is mandatory, if local / remote communication withNEs Ethernet port or TCP/IP network is required (if both connections are required
contemporarily, two Ethernet Cards are needed)
RS232C serial port (9.6 to 57.6 Kbits/sec) is suggested, if local communication
with NEs ECT serial port (Finterface) is required.
N.B. In alternative, for the usage of the NEs Finterface with any PC having no
RS232 serial port (but obviously with USB ports available), it is possible
to use an USB to RS232 adapter (see Tab. 2. on page 25 )
Refer to para.13.1 from page 24 , for details on how to connect the PC to the NEs, by local
or remote connection.
2 ) Windows Versions
Windows 2000 SP4
Windows XP till SP2 (Professional Edition only)
Windows Vista
WARNING 1: only one Windows version can be present in the same PC
WARNING 2: for all Windows versions, it is mandatory to deactivate the Firewall installed
WARNING 3: restriction for Windows Vista:
With Windows Vista, the SWP download for NE upgrade cannot use
LLMAN (therefore the NEs F interface must not be used for the SWP
download)
For user convenience, this restriction is repeated on pages 162 and 164
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
16/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
16/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
3 ) Additional SW requirements
Java Runtime Environment (JRE): JRE 6 update 3
N.B. the necessary version is included in the SWP CDROM
Browser supported:
for Windows 2000 and XP:
Microsoft Internet Explorer 6.0 (6.0.2900.2180 SP1+)
or Microsoft Internet Explorer 7.0 (7.0 .5730.11C0+)
for Windows Vista:
Microsoft Internet Explorer 7.0 (7.0 .5730.11C0+)
for Windows 2000, XP, and Vista:
Mozilla Firefox v2.x starting from v2.0.0.12
N.B. Opera browser is not supported in any version.
WARNING: it is mandatory to manually disable system and browser proxy
configurations prior to use both NEinteractive Provisioning Tool and
Alarms & Settings (web server) functions; otherwise, the IP connection
from the PCs web server to the NE cannot take place.
Used browser window should be at least as larger as 1024x768
4 ) PC settings for its use inside the TCP/IP network
N.B. You have nothing to do, if you are employing a PC already configured for TCP/IP
communication (e.g. already used for any AlcatelLucent 1320CTbased or
NEtObased applications).
These settings include the following types of configuration:
PC hostname
Communication Protocol : TCP/IP (if not automatically configured)
IP address
IP mask
These settings depend on the Windows version employed. Refer to its documentation, to know
how to perform them.
11.4 PC Administrator privileges requirements to install and deinstall the
SWP TCO SUITE components
The PC Administrator privileges are necessary to install:
the Java Runtime Environment (JRE), automatically or manually: see Appendix B on page 191
the AlcatelLucentproprietary LLMAN and related Tiny Tools: see Appendix C on page 201
The PC Administrator privileges are also necessary to deinstall them: see Appendix Eon page 227
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
17/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
17/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
12 ITEMS FOR SW DISTRIBUTION TO CUSTOMERS
This chapter describes the items foreseen for the system SW (that resident inside the equipment, and that
for the NE management):
Subject On page
Items for SW distribution to Customers 18
SWP TCO SUITE CDROM description 20
SWP TCO SUITE CDROM part number 20
SWP TCO SUITE contents 20
Additional requirements for the use of the SWP TCO SUITE 21
Notes on SWP CDROM identification, and Product Release Note 22
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
18/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
18/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
12.1 Items for SW distribution to Customers
The scope of this paragraph is to compare the SW products present in the various CDROMs:
9400AWY R.2.0 V2.0.6 CDROM
9400AWY R.2.1 V2.1.2 CDROM
9400AWY R.2.1 V2.1.3 CDROM
SWP TCO SUITE CDROM
[1] NEspecific equipmentresident software
The software necessary for the system working (equipmentresident software) is present in the
Flash Carddelivered with the equipment, and inserted in the IDU MAIN unit.
Refer to para.14.2.1 on page 38 for details.
[2] NEspecific software components for Equipment Controller and Peripheral Units of
9400AWY (IDU and ODU)
These SW components are used whenever you have a:
9400AWY R.2.0 NE running with SWP version < V2.0.6, and you want to upgrade it to SWP
version V2.0.6 , by means of the SW downloadfunction
9400AWY R.2.1 NE running with SWP version < V2.1.2, and you want to upgrade it to SWP
version V2.1.2 , by means of the SW downloadfunction
9400AWY R.2.1 NE running with SWP version < V2.1.3, and you want to upgrade it to SWP
version V2.1.3 , by means of the SW downloadfunction
These NEspecific SW components:
are present respectively in the:
9400AWY R.2.0 V2.0.6 CDROM
9400AWY R.2.1 V2.1.2 CDROM
9400AWY R.2.1 V2.1.3 CDROM
are not present in the SWP TCO SUITE CDROM
[3] Additional software products
JRE(Java Runtime Environment), that is present, with the necessary specific version, in the
following CDROMs:
9400AWY R.2.0 V2.0.6 CDROM
9400AWY R.2.1 V2.1.2 CDROM
SWP TCO SUITE CDROM
JRE is automatically installed in the PC at first insertion of the CDROM.
N.B. the JREversion present in the SWP TCO SUITE CDROM is higher than that of JRE
present in the other CDROMs listed above.
N.B. the 9400AWY R.2.1 V2.1.3 CDROM does not contain any JREcomponent.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
19/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
19/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
LLMAN (Lower Layer MANager), that must be explicitly installed in the PC, whenever the use
of the NEs local F interface (RS232 serial interface) is required. This software product is present
in the following CDROMs:
9400AWY R.2.0 V2.0.6 CDROM
9400AWY R.2.1 V2.1.2 CDROM
SWP TCO SUITE CDROM
N.B. the LLMANversion present in the SWP TCO SUITE CDROM is higher than that of
LLMAN present in the other CDROMs. Moreover, it is also higher than that of
LLMAN present in the SWP TCO SUITE Rel.1.6 CDROM.
[4] NE management SW tools
a ) contained in theSWP TCO SUITE CDROM: refer to para.12.2.2 on page 20
b ) contained in the NEspecific SWP CDROM :
they are the:
embedded TCO Suite
1320CTbased Craft Terminal
present respectively in the:
9400AWY R.2.0 V2.0.6 CDROM
9400AWY R.2.1 V2.1.2 CDROM
The installation and use of these NE management SW tools is explained in the specific NE User
Manual (Tab. 1. on page 14 )
N.B. the 9400AWY R.2.1 V2.1.3 CDROM does not contain any NE management SWtool.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
20/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
20/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
12.2 SWP TCO SUITE CDROM description
12.2.1 SWP TCO SUITE CDROM part number
The P/N of theSWP TCO SUITE CDROM, containing this manual, is written on the CDROM itself you
own.
For SWP CDROM identification, refer to para.12.3 on page 22
12.2.2 SWP TCO SUITE CDROM contents
The following software products are contained in theSWP TCO SUITE CDROM:
[1] Main Menu
The Main Menu is the starting point of this SWP, with the screen depicted in Fig. 10. on page 47.
The functions available are:
Provisioning Tool : it starts a wizard tool, which allows to configure completely and easily one
9400AWY V2.0.6 or V2.1.2 or V2.1.3 NE, in not NEinteractive (offline), or in NEinteractive
(online) modality. This tool allows also to modify a configuration created previously, and to get
the configuration from a running NE.
Alarms & Settings : it starts a NEinteractive function, allowing the user to login a NE through
the use of the NE web server via a generic Internet browser, to monitor the status of NE alarms
and to get and/or set some NEs parameters
Start of one NEtO session : see point [2] below
Start of 1320CT : it is meant for old 9400AWY NEs backward compatibility only
Acceptance Tool : it is meant to be used in the commissioning phase; it replaces the functions
previously covered by the document TRS (Test Report Sheets) available as Pdf, Word or Excelfile; the main advantage is that the Acceptance Tool can take many parameters directly from
the NE
Advanced Settings : functions to install the SWP in PC
[2] NEtO
NEtO (Network Element Overview) is the starting point to make a full supervision and control of the
most recent AlcatelLucent radio transmission 9400AWY NEs: 9400AWY Rel.2.0 from version
V2.0.6, and 9400AWY Rel.2.1 from version V2.1.2.
N.B. NEtO is used also for the AlcatelLucent radio transmission 9500MPR NEs (all versions),
but you must be aware that the SWP TCO SUITE Rel.1.7 does not manage any versionof 9500MPR NEs.
It allows to perform the following operations on one NE:
start its supervision
run the Alarm Monitor function
perform its login, launching the WebEML application specific for the NE type and version ( see
following point [3] )
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
21/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
21/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
[3] WebEML (fullJava Local and Remote Craft Terminal)
The WebEML is used for the complete NE management, allowing the dialogue between the Craft
Terminal and the NE.
Each NE type and version has its own WebEML SW package.
TheSWP TCO SUITE contains the WebEML SW packages for:
9400AWY V2.0.6
9400AWY V2.1.2
9400AWY V2.1.3
[4] Additional software products
JRE(Java Runtime Environment), that is automatically installed in the PC at first insertion of
theSWP TCO SUITE CDROM
LLMAN (Lower Layer MANager), that must be explicitly installed in the PC, whenever the use
of the NEs local F interface (RS232 serial interface) is required.
N.B. as specified in point [2] on page 18 , theSWP TCO SUITECDROM does not containthe NEspecific software componentsfor NE upgrading. If necessary, they must be
retrieved from the NEspecific SWP CDROM.
12.2.3 Additional requirements for the use of the SWP TCO SUITE
a ) NE software state
the NE type must be ULS, and the SWP active version in the NEs Flash Card must be:
V2.0.6(if 9400AWY R.2.0)
V2.1.2 or V2.1.3 (if 9400AWY R.2.1)
This check can be done making the NE supervision by NEtO, then reading the NE type (ULS)
and version, as shown in Fig. 46. on page 107
any 9400AWY NE, that must be accessed in local or remote way by the SWP TCO SUITE
applications, must have already a valid local IP address and a valid Ethernet Configuration
IP address [ see para.13.2.2 on page 28 ], and such addresses must be known by the
Operator.
b ) Security
Operations allowed by the SWP TCO SUITEs SW tools are submitted to a security control, described
in para.13.3 on page 33
c ) Operator skills
the Operator shall be familiar with the use of personal computers in WINDOWSenvironment
[versions specified in point 2 ) on page 15 ], internally to which the Network Elements
application software operates.
the Operator must be familiar with all the functionalities of the 9400AWY R.2.0 and/or
9400AWY R.2.1 equipment.
furthermore, for a number of configuration applications, the operator shall be aware of some
specifications of the International Standard Organization (ISO) and of the standards applied tothe Synchronous Digital Hierarchy (SDH) (CCITT Recommendations).
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
22/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
22/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
12.3 Notes on SWP CDROM identification, and Product Release Note
These notes apply both to the SWP TCO SUITE CDROMs, and to the SWP 9400AWY V2.x.x
CDROMs:
[1] SWP CDROM identification
each SWP is distributed by means of a specific SWP CDROM
a SWP is identified by its Denomination, P/N (Part Number) and CS (Change Status), that
are printed on the CDROMs label
a SWP with new Version Level, providing main features in addition to those of the previous
Version Level SWP, is distributed by means of a SWP CDROM having new Denomination,
new P/N (Part Number), and CS restarting from 01
a SWP patch version, if any, is created to correct SW bugs, and/or to add minor features, and
is distributed by means of a SWP CDROM, that can be identified:
by the same P/N of the former CDROM, but with an incremented CS number (e.g.
CS=02 instead of previous CS=01)
or by a new P/N, and CS restarting from 01
[2] Product Release Note
the Product Release Note contains information not strictly necessary for Customers (like the
SW Package Identification data, the list of SW Package Components, the list of ECT SW
SubComponents, the description of new features and modifications, restrictions and known
problems, etc.)
the Product Release Note is neither contained in the SWP CDROM nor automaticallydelivered to Customers
the Product Release Note is available only on specific request to your AlcatelLucent local
dealer, specifying the SWP TCO SUITE CDROM P/N and ICS (edition) printed on the SWP
CDROM itself (see point [1] above).
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
23/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
23/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
13 CONNECTIONS BETWEEN THE CRAFT TERMINAL AND THE NE,
AND SECURITY POLICY
This chapter describes the types of physical access and the rules to observe (network addresses and
security) , to configure and allow the access from the SWP TCO SUITEbased Craft Terminal to the NE.
Subject On page
Types of physical access from the PC to the NE 24
NEs F interface (RS232 serial interface) on IDU MAIN unit 25
NEs Ethernet interface on IDU MAIN unit 26
NEs pointtopoint radio interface and NMS (TMN connections) rings and
chains27
PCNE network addressing rules 28
NEs management interfaces 28
NEs local IP address and Ethernet Configuration IP address 28
NE reachability from the CT 29
Networking scenarios for PC connection to the NEs local IP address 30
Security 33
Summary of security features 33
Security by operator profile 34
Security by community string 35
Security by access lists 36
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
24/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
24/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
13.1 Types of physical access from the PC to the NE
The physical access to a 9400AWY NE, for its management by the PC running the SWP TCO SUITE
software , can be on the following interfaces of the 9400AWY NE:
F interface (RS232 serial interface), see point [1] on page 25
Ethernet management interface, see point [2] on page 26 Pointtopoint radio interface and NMS (TMN connections) rings and chains, see point [3] on page
27
Notes for all types of access:
a ) Depending on physical interface, the use of some SW management tools has some restrictions.
b ) LCT and RCT
The specification of LCT (Local Craft Terminal) and RCT (Remote Craft Terminal), in following tables
Tab. 3. to Tab. 6. ,is relevant to the CT characterization for the supervised NE.
This implies different command feasibility behaviors, as described in para.19.8.1 from page 121
(some commands cannot be executed by RCT).
c ) Max number of contemporary accesses to the same NE
For the NE access by:
Main Menu NEinteractive functions (online Provisioning Tool and Alarms & Settings), up
to five Ethernet user connections are supported at the same time on a single NE
WebEML (through NEtO) and OS, refer to para.18.2 on page 98
9400AWY R.2.1 IDU MAIN unit
F InterfaceManagement
Ethernet Interface
9400AWY R.2.0 IDU MAIN unit
NMS Interface
(G703 + V11)
Radio Interface
(IDUODU cable)
Radio Interface
(IDUODU cable)
NMS Interface
(V11)
NMS Interface
(G703)F Interface
Management
Ethernet Interface
Fig. 1. Physical interfaces for the 9400AWY NE management
Comparison with the NE management software tools of the:
9400AWY R.2.0 V2.0.6 CDROM,
and of the 9400AWY R.2.1 V2.1.2 CDROM
with the SWP TCO SUITE, there is no need of manual interface customization for alternative use of
Finterface or Ethernetinterface
with the SWP TCO SUITE, the access to the NE requires always the NE address specification, even
in case of PCNE interconnection by Finterface
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
25/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
25/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
[1] NEs F interface (RS232 serial interface) on IDU MAIN unit
WARNING 1: for the use of the F interface, the LLMAN installation and configuration must be
performed, as described in the AppendixC on page201
PUBLIC SWITCHED
TELEPHONE NETWORK
PCs RS232 interface RS232 cable
PCs modem
F
NE supervised through F interface
Modem
Refer to the Appendix D on page 217 , to know how to implement the connection via the public switched
telephone network.
Tab. 2. Typical AlcatelLucent RS232 cable and adapter
Cable / Adapter P/N Notes
RS232 cable 1AB054120027 Standard RS232 cable
USB to RS232 adapter 1AF11294AA**
In addition to the standard RS232 cable, for the
usage of the NEs Finterface with any PC havingno RS232 serial port (but obviously with USB
ports available)
Tab. 3. Allowed NE management SW tools on NEs F interface
SW management toolAllowed on
Finterface
NEs TCP/IP address
required for NE access
LCT /
RCT
SWP TCO SUITE Main Menu
NEinteractive functions:
Provisioning Tool
Alarms & Settings
Acceptance Tool
NO
SWP TCO SUITEWebEML YES NO LCT
Fig. 2. Connections between PC and NE through NEs F Interface
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
26/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
26/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
[2] NEs Ethernet interface on IDU MAIN unit
ETH
SWITCH
IP NETWORKPC Ethernet interface
crossconnect Ethernet cable
Eth
NE supervised through Ethernet interface
normal (direct) Ethernet cable
Tab. 4. Typical AlcatelLucent Ethernet cablesThe suggested AlcatelLucent Ethernet cables are:
type length (m) P/N
1 3CC52141AAAA
normal (direct) cable 5 3CC52141ABAA
15 3CC52141ACAA
1 3CC52142AAAA
crossconnec ca e5 3CC52142ABAA
Tab. 5. Allowed NE management SW tools on NEs Ethernet interface
SW management toolAllowed on
Eth.interface
NEs TCP/IP address
required for NE access
LCT /
RCT
SWP TCO SUITE Main Menu
NEinteractive functions:
Provisioning Tool
Alarms & Settings
Acceptance Tool (N.B.)
YES YES
SWP TCO SUITEWebEML YES YES RCT
N.B. for details on NE access in case of Acceptance Tooluse, refer to chapter17 from page83
Fig. 3. Ethernet connections between PC and NE
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
27/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
27/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
[3] NEs pointtopoint radio interface and NMS (TMN connections) rings and chains
ODU ODU
STATION A STATION B
9400AWY RADIO LINK
Access to Station B from PC
connected locally to Station A
NE supervised through Radio interface
Local PC
IP NETWORK Remote PC
PUBLIC
SWITCHED
TELEPHONE
NETWORK
PC connected
locally to Ethernet
or F interface of
STATION A
PC connected remotely to Ethernet or F
interface of STATION A
Access to Station B from PC
connected remotely to Station A
FEth
NMSEth
NMS
NE supervised through NMS
(G703V11)
NMS
Eth
Eth
NMS
NMS
Eth
NE supervised through Ethernet
interface
NE supervised through NMS
(G703V11)
Other NE
Other NE
Other NE
TMN system
Refer to the specific NE User Manual (Tab. 1. on page 14 ) for details on the NMS connections.
Tab. 6. Allowed NE management SW tools on NEs Radio interface and NMS rings and chains
SW management tool
Allowed on
interface of
STATION A
NEs TCP/IP
address required
for NE access
LCT /RCT
SWP TCO SUITE Main Menu
NEinteractive functions:
F NO
rov s on ng oo
Alarms & Settings
Acceptance Tool (N.B.)Ethernet YES YES
F
eEthernet
N.B. for details on NE access in case of Acceptance Tooluse, refer to chapter17 from page
83
Fig. 4. Access to NE through NEs radio Interface and NMS rings and chains
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
28/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
28/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
13.2 PCNE network addressing rules
This paragraph describes the network address rules that must be observed to allow a PC (running the
SWP TCO SUITE) the access to one or more 9400AWY NEs.
13.2.1 NEs management interfaces
For its management by SWP TCO SUITE tools, the 9400AWY NE has:
one Ethernet management interface, which is used to access the NE, and that is identified by its local
IP address and Ethernet Configuration IP address, defined in para.13.2.2 below
one pointtopoint TMNRF interface toward the other NE of the radio link
and one selectable pointtopoint TMNV11 or TMNG703 interface toward another colocated NE
all pointtopoint interfaces (TMNRF, and TMNV11 or TMNG703) are unnumbered and borrow
the IP address from the local IP address
13.2.2 NEs local IP address andEthernet Configuration IP address
As delivered from AlcatelLucent Factory, the NEs addresses:
local IP address, used to identify uniquely the NE inside the Transmission Management Network
(TMN)
and the Ethernet Configuration IP address, used to identify uniquely the NEs Ethernet
management interface inside the TCP/IP network
are both set at default value 10.0.1.2, as shown in screen below (one of the steps of the Full
Configuration Proceduredescribed in chapter 15 from page 59 )
These values can be maintained only until the NE remains disconnected from the TCP/IP network and
from the TMN, and must be changed to have them different from those of the other NEs present in the
accessible network. Their setting is foreseen in the commissioning phase; for details, refer to the specific
NE User Manual (Tab. 1. on page 14 )
In the commissioning phase, you can define the local IP address and Ethernet Configuration IPaddress:
with the same value (suggested solution)
or with different values
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
29/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
29/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
WARNING: if such NE addresses are different, they must not belong to the same subnetwork, as in
following correct example:
local IP address = 151.98.96.221
and Ethernet Configuration IP address = 151.98.97.232
with IP Mask = 255.255.255.0
N.B. in the case these NE addresses are different:
the local IP address is that to be always used to access the NE by NEtO application
the Ethernet Configuration IP address is that to be always used to access the NE
by the NEinteractive Provisioning Tool and Alarms & Settings (web server)
functions.
13.2.3 NE reachability from the CT
[1] Foreword
The CT must be able to reach the NE, through one of the local or remote connections described onprevious pages 25 to 27
The access rules are different according to the type of application used; if you access a NE from your
PC:
1 ) through the Finterface, and by the NEtO application, the NEs local IP address must be
always used, and there are no network constraints
2 ) through the Ethernet interface, and by the NEtO application, for which the NEs local IP
address must be always used, it is necessary to build a networking relationship, according to
the PCNE connection scenario, between:
the IP address of the PC the local IP address of the NE
the Ethernet Configuration IP address of the NE
as described in para.13.2.4 from page 30
3 ) through the Ethernet interface, and by the NEinteractive Provisioning Tool and Alarms &
Settings applications (web server operations), any problems between the IP addresses of the
PC and the NE are solved automatically, choosing Local or Remote in the application start
screen, as described in para.14.5 from page 49
[2] How to check the NE reachability from the CT
N.B. Usually, these operations have to be performed once only (i.e., whenever you have not
done them previously for the specific NE). This check is not necessary in case of PCNE
connection through the Finterface.
To make this check, open the Windows Command Prompt application and execute the command:
ping NE_address
Verify the connection, then close the command window.
Note: in case the local IP address and Ethernet Configuration IP address are different from each
other, perform this check for both.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
30/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
30/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
13.2.4 Networking scenarios for PC connection to the NEs local IP address
These scenarios describe the networking address configurations necessary to allow a PC (running the
SWP TCO SUITE) to access a 9400AWY NE through its local IP address.
N.B. Address values are given as examples. Moreover:
address_value/24 means with IP mask = 255.255.255.0
In this case, if the address_value is that of the subnet 192.168.1.0, all addresses 192.168.1.0
to 192.168.1.255 are stated as belonging to the subnet
address_value/32 means with IP mask = 255.255.255.255
In this case, if the address_value is that of the subnet 192.168.1.0, only the address
192.168.1.0 is stated as belonging to the subnet
[1] NE local access by one PC
the CT accesses the NE using the local IP address; the SNMP traps are sent by NE using the
local IP address as source IP address
it is possible to configure the Ethernet Configuration IP address with the samevalue used for
local IP address
the subnet must be defined both on the PC and the NE
Eth
9400AWY NE
local IP address = 10.0.1.1
subnet = 10.0.1.0/24.2
.1
10.0.1.1
[2] NE local and remote access by one PC, with Default Gateway or Static Route, or OSPF
in this scenario, to reach the local and remote NEs by their own local IP address, the PC must
be configured with a Default Gateway or Static Route having as gateway the Ethernet
Configuration IP address of the local NE (192.168.1.1 in the following examples)
at the same time the CT must be reachable by the remote NE using a Static Route on the remote
NE, or enabling OSPF on both local and remote NEs
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
31/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
31/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
First example
Eth
9400AWY NE
local IP address = 10.0.1.1
subnet = 192.168.1.0/24.2
.1
Set:
Default Gateway = 192.168.1.1
or:
Static Route 10.0.1.0/24 Gateway 192.168.1.1
10.0.1.1
10.0.1.2
9400AWY NE
local IP address = 10.0.1.2
LOCAL NE REMOTE NE
Second example
Eth
9400AWY NE
local IP address = 10.0.1.1
subnet = 192.168.1.0/24.2
.1
Set:
Default Gateway = 192.168.1.1
or:
Static Route 176.16.1.0 /24 Gateway 192.168.1.1
and:
Static Route 10.0.1.0/24 Gateway 192.168.1.1
10.0.1.1
172.16.1.1
9400AWY NE
local IP address = 172.16.1.1
LOCAL NE REMOTE NE
WARNING: if both the local IP address and the Ethernet Configuration IP address of the local
NE belong to the same subnetwork, the local IP address of the local and remote
NEs must never belong to the same subnetwork. E.g. the following scenario does notwork:
Eth
9400AWY NE
local IP address = 10.0.1.1
.2
.1
10.0.1.1 reachable
10.0.1.2 unreachable
9400AWY NE
local IP address = 10.0.1.2
LOCAL NE REMOTE NE
subnet = 10.0.1.0/24
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
32/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
32/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
[3] NE access by more than one PC
to allow more than one PC to access the NEs in the network, theirlocal IP address, and the
IP addresses of the PCs, must belong to different subnets
Eth
9400AWY NE
local IP address = 10.0.1.1
subnet = 192.168.1.0/24
.2
.1
Set:
Default Gateway = 192.168.1.1
or:
Static Route 10.0.1.0/24Gateway 192.168.1.1
10.0.1.1
10.0.1.2
Eth
9400AWY NE
local IP address = 10.0.1.2 10.0.1.1
10.0.1.2
.1
.2
subnet = 192.168.2.0/24
Set:
Default Gateway = 192.168.2.1
or:
Static Route 10.0.1.0/24Gateway 192.168.2.1
[4] Notes on OSPF routing
the OSPF routing protocol can be activated on each pointtopoint interface (TMNRF,
TMNV11, and TMNG703) and on the Ethernet Configuration IP address interface
the 9400AWY NE can act as ABR (Area Border Router) managing a maximum of 4 areas
(Backbone + 3 areas). It is possible to assign different OSPF areas to each pointtopoint
interface, and to the Ethernet Configuration IP address interface
an OSPF area can be configured as Stub Area. Configuring a Stub Area reduces the topological
database size and reduces the memory requirements for NE inside that area for NEs that are
not ABR
the OSPF Area Identifier can take a form similar to an IP address A.B.C.D
the Area 0 or Backbone has Area ID 0.0.0.0
the Area ID has not any correlation with the IP address of the interface that belongs to that area
enabling OSPF, static routing information configured on one NE are automatically redistributed
as OSPF external routes inside the OSPF areas active on this NE
static routings are not redistributed inside the OSPF areas configured as Stub Area
if OSPF is enabled on NEs, static routes, if needed, have to be added only on the NE reached
by Ethernet (called Gateway NE)
in case of CT not directly connected to the Gateway NE, the Ethernet interface of this NE must
be reachable in order to make the software download working
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
33/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
33/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
an example of OSPF Area configuration is shown in following figure:
9400AWY NElocal IP address
10.0.1.3
10.0.1.1
10.0.1.2
10.0.1.3
Eth
9400AWY NE
TMNG703
orV11
TMN
RF
local IP address
10.0.1.1local IP address
10.0.1.2
9400AWY NE
OSPF Area 1 OSPF Area 2
.2
.1
subnet = 192.168.1.0/24
Default Gateway = 192.168.1.1
OSPF Area 0
13.3 Security
13.3.1 Summary of security features
The aim of the security features of 9400AWY system is to protect the NE from all undesired accesses.
The following security features are available:
usable on AWY 2.0.6, 2.1.2, and 2.1.3:
Security by operator profile, described in detail in para.13.3.2 on page 34
This is a standard feature, allowing the NE access only through a UserName and Password set,
valid for the specific NE.
As delivered from AlcatelLucent factory, the Flash Card contains only one default
Administrator UserName and Password set.
usable on AWY 2.1.3 only:
Security by community string, described in detail in para.13.3.3 on page 35
This feature is associated to the NEtO applications, and allows to assign to the NE a community
string. An user who wants to access such a NE, must provide this community string before
before to supervise and login the NE.
Security by access lists, described in detail in para.13.3.4 on page 36
The NE management operations that can be done by means of the SWP TCO SUITE are
grouped in different services: snmp, http, ftp and telnet.
The feature Security by access listsallows to write an access list table, for each one of the
services stated above, containing the IP addresses allowed to perform that specific service.
Both these security features are optional.
For both these security features, the Flash Card (as delivered from AlcatelLucent factory) contains
default parameters, corresponding to security feature not active.
N.B. The management of the security features is described in chapter 113 on page 175
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
34/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
34/232 3DB 75003 BAAA Ed.01
USER MANUALSWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
13.3.2 Security by operator profile
[1] UserName and Password
To login a NE, whichever the physical access method, you must have a UserName and Password
set, valid for the specific NE.
UserName and Password are requested by a prompt screen like this:
At first installation time, one default Administrator user is available only, with (lower case):
UserName= initial
Password = initialing
Otherwise, use the Login information the Administrator has assigned you.
In the login procedure, the username is displayed on the screen, while the cleartext password is
not displayed on the screen. After 3 times of consecutive unsuccessful NE login attempts, the CTNE
logical interface closes the login procedure. To access the NE, a new login action must be performed.
WARNING: The change of the password of this Administrator user is strongly suggested, to be
done at the end of all commissioning phases. Further this initial user, the
Administrator is allowed to create/delete users belonging to the predefined profiles.
[2] Login profiles
Each user (identified by a UserName and a Password) is associated to one of the predefined profiles.
The predefined profiles are the following:
Administrator (both for OS interface and CT/MibBrowser interface)
The Administrator can do everything on the NE.
In particular, only the Administrator can manage the security features summed up inpara.13.3.1 on page 33 :
add/remove users, besides changing own password and those of all users
set/change/remove the community string
set/change/remove the access lists
export the access lists from a NE, and import them in another NE.
Constructor(only for OS interface)
This Operator can do everything on the NE also to access to the Manager List bypassing the
RM checks, but for this Operator some administration functions are disabled: for example the
Constructorcannot add or remove operators, and cannot do backup and restore.
This user profile is related only to OS system and so not stored on MIB NE.
8/10/2019 alcatel tco suite rel.1.7 for 9400awy r.2.1 v2.1.3 user manual.pdf
35/234
Allrightsreserved.
Passingonandcopy
ingofthis
document,useandcommunicationofitscontentsnot
p
ermittedwithoutwrittenauthorizationfromA
lcatelLucent
35/2323DB 75003 BAAA Ed.01
USER MANUAL SWP TCO SUITE Rel.1.7
TCO SUITE DESCRIPTION AND USAGE
Operator(both for OS interface and CT/MibBrowser interface)
This Operator has in charge the operation at network level, not at radio site.
This Operator can change her/his own user password.
This Operator cannot manage network configuration, only for NTP Configuration, due to
dangerous isolation of NE.
This Operator cannot either do quick configuration, or backup/restore, or restart NE. Also the
provisioning of equipment is not supported, as well the operations requiring the operator
presence on the radio site.
CraftPerson (only for CT/MibBrowser interface)
This Operator has in charge the installation and the maintenance at radio site.
This Operator can do everything on NE system, but cannot manage the security features, but
can change her/his own user password.
viewer (both for OS interface and CT/MibBrowser interface)
This Operator can only explore the NE.
This Operator can change her/his own user password.
[3] Operations allowed to Login profiles, according to functions, access, and local access status
NEinteractive Provisioning Tool(described in point [2] from page 61 )
allowed to the Administrator, CraftPersonandOperator
denied to the Viewer
Alarms & Settings(described in chapter 16 from page 65 )
according to Tab. 7. on page 67
NEinteractiveAcceptance Tool(described in chapte