All this innovation
and detail means that you
reap the benefits of:
The benefits of harvesting with air can be witnessed across an array of crops such assoybeans, dry beans, lentils, chickpeas, poppy seeds, sorghum, grass seeds, canolaand cereal crops.
The system is driven by a quiet and efficient fan while a simple, serviceable belt drive system ensures that your harvest stays on track.
The Airbar system enhances the function of the OEheader design; its out-front air manifold systemleaves the original factory reel intact and operational
Using a high-powered air stream, the AWS Airbarincreases the yield from your field by moving cropsquickly from the knife and on to the header.
Reduced Shatter Loss
without air with air
View from cab is unobstructedwith the air manifold mountingdirectly in front of the reel
Adjust nozzle positionon the fly using in-cab
controls
OE reel adjustment retained with model specific manifold
mounts
Regulate airvolume usingin cab controls
Efficient, reliableand serviceablebelt drive fanassembly
Reduced trash intakewith vertically mountedfan behind the head
Draper Brush, SumpSaver and StainlessFloor Kits are availablefor a variety of headers
Even air flow acrossknife with Equal lengthnozzles tailored to each
header model
Draper Header
• Airbar reduces shatter loss at the knife and increases yield by 1-4 bushels per acre.
• Longer 48” contoured nozzles direct air horizontally to the knife, moving crops quickly on to the canvas as they are cut.
• • The powerful air stream improves already advance feeding capabilities of a draper system.
• Lower pods and seeds resting behind the knife are rushed onto the canvas minimizing loss.
• The belt drive fan generates an efficient, powerful stream of air with minimal complexity.• Belt and pulley drive design is easily serviceable with readily available, industry standardcomponents.components.
• Rugged, simple driveline usingindustry standard components
• In-field serviceability• Drive ratio matched to combinemodel ensures proper air flow• In-cab 12V • In-cab 12V remote control of airthrottle & nozzle position• 2-piece nozzle construction withdurable, light weight die-castmounting saddle
• Optimized nozzle geometry,rreduces power loss & improvesefficiency• Available brush kits
• High velocity air stream improves feeding capacity and prevents crop build up behind the knife.• Improved feeding capacity allows for a faster more consistant ground speed, reducing fuel and operating costs• This powerful air stream thrusts crops away from the knife as they are cut, preventing shatter loss and increasing yields by 1-4 bushels per acbushels per acre.• Glare resistant, lightweight aluminum manifold is design to specifically integrate for each make and model of header, not interfering with the factory reel.• Each kit is configured for your specific header allowing for ease of installation and maintaining proper weight balance of the header.
• Drive ratio matched to combinemodel ensures proper air flow
• 2-piece nozzle construction withdurable, light weight die-castmounting saddle
• In-field serviceability
• Rugged, simple driveline usingindustry standard components
• 12V remote control of air throttle& n& nozzle position
• Optimized nozzle geometry,reduces power loss & improvesefficiency
• Available floor kits for selectmodelsmodels
Auger Header
Draper Brush Kit
The AWS Draper Brush Kit helps maintain consistent canvas tension during harvest. Crop material isprevented from entering the rear the canvas and building up on the drive rollers. A rigid metal deflector and fine bristle brush provide the seal, reducing crop loss and header maintenance. Available for allpopular draper models.
Sump Saver
AWS SUMP SAVERS are available for all MacDon and John Deere flex draper heads. A stiff brush fastened to the front of the stone sump (directly behind the knife), provides a smooth transition of crop flow onto the feed belt while allowing stones to drop down through the bristles into the sump
Floor Kit
The AWS Floor Kit replaces the factory stone dam / floor with a low profile panel for improved feeding. The improved profile of these floor kits further enhance the performance of our proven Airbar systems. Floor Kits are available for select John Deere, Case IH, New Holland & Claas heads
Accessories
Uptime Kit
Keep Harvest on the move with the AWS UPTIME KIT.
Reduce down-time by having common maintenance items on-hand. AWS UPTIME KITS are available for all models of Airbar systems.
Parts Included:Parts Included:• Primary Drive Belt• Secondary Shaft• (4) Bearing & Flanges• (2) Nozzles & Gaskets• (2) Nozzle U-Bolts
Driven by our desire to offer the best solutions and support to our customers, wwe're not just any choice for air assisted harvesting, we're your choice. We simplified the concept of adding air tocombine headers and capitalizing on the benefits of air across a wide range of crops. We listen to our dealers and customers and use their feedback to ensure our AWS Airbar continues to be the best solution available. We take an active role in the agricultural sector and keep in touch with today's farming equipment, practices, and challenges. By using thoughtful, and challenges. By using thoughtful, robust design, superior customer service, and solid reliability to connect our proven product, seasoned customers, & ourselves, we are best suited to meet your needs.
Have a Question? Contact one of our Skilled Service Technicians for help.
Born from Service
Built on Reliability