All this innovation

and detail means that you

reap the benefits of:

The benefits of harvesting with air can be witnessed across an array of crops such assoybeans, dry beans, lentils, chickpeas, poppy seeds, sorghum, grass seeds, canolaand cereal crops.

The system is driven by a quiet and efficient fan while a simple, serviceable belt drive system ensures that your harvest stays on track.

The Airbar system enhances the function of the OEheader design; its out-front air manifold systemleaves the original factory reel intact and operational

Using a high-powered air stream, the AWS Airbarincreases the yield from your field by moving cropsquickly from the knife and on to the header.

Reduced Shatter Loss

without air with air

View from cab is unobstructedwith the air manifold mountingdirectly in front of the reel

Adjust nozzle positionon the fly using in-cab

controls

OE reel adjustment retained with model specific manifold

mounts

Regulate airvolume usingin cab controls

Efficient, reliableand serviceablebelt drive fanassembly

Reduced trash intakewith vertically mountedfan behind the head

Draper Brush, SumpSaver and StainlessFloor Kits are availablefor a variety of headers

Even air flow acrossknife with Equal lengthnozzles tailored to each

header model

Draper Header

• Airbar reduces shatter loss at the knife and increases yield by 1-4 bushels per acre.

• Longer 48” contoured nozzles direct air horizontally to the knife, moving crops quickly on to the canvas as they are cut.

• • The powerful air stream improves already advance feeding capabilities of a draper system.

• Lower pods and seeds resting behind the knife are rushed onto the canvas minimizing loss.

• The belt drive fan generates an efficient, powerful stream of air with minimal complexity.• Belt and pulley drive design is easily serviceable with readily available, industry standardcomponents.components.

• Rugged, simple driveline usingindustry standard components

• In-field serviceability• Drive ratio matched to combinemodel ensures proper air flow• In-cab 12V • In-cab 12V remote control of airthrottle & nozzle position• 2-piece nozzle construction withdurable, light weight die-castmounting saddle

• Optimized nozzle geometry,rreduces power loss & improvesefficiency• Available brush kits

• High velocity air stream improves feeding capacity and prevents crop build up behind the knife.• Improved feeding capacity allows for a faster more consistant ground speed, reducing fuel and operating costs• This powerful air stream thrusts crops away from the knife as they are cut, preventing shatter loss and increasing yields by 1-4 bushels per acbushels per acre.• Glare resistant, lightweight aluminum manifold is design to specifically integrate for each make and model of header, not interfering with the factory reel.• Each kit is configured for your specific header allowing for ease of installation and maintaining proper weight balance of the header.

• Drive ratio matched to combinemodel ensures proper air flow

• 2-piece nozzle construction withdurable, light weight die-castmounting saddle

• In-field serviceability

• Rugged, simple driveline usingindustry standard components

• 12V remote control of air throttle& n& nozzle position

• Optimized nozzle geometry,reduces power loss & improvesefficiency

• Available floor kits for selectmodelsmodels

Auger Header

Draper Brush Kit

The AWS Draper Brush Kit helps maintain consistent canvas tension during harvest. Crop material isprevented from entering the rear the canvas and building up on the drive rollers. A rigid metal deflector and fine bristle brush provide the seal, reducing crop loss and header maintenance. Available for allpopular draper models.

Sump Saver

AWS SUMP SAVERS are available for all MacDon and John Deere flex draper heads. A stiff brush fastened to the front of the stone sump (directly behind the knife), provides a smooth transition of crop flow onto the feed belt while allowing stones to drop down through the bristles into the sump

Floor Kit

The AWS Floor Kit replaces the factory stone dam / floor with a low profile panel for improved feeding. The improved profile of these floor kits further enhance the performance of our proven Airbar systems. Floor Kits are available for select John Deere, Case IH, New Holland & Claas heads

Accessories

Uptime Kit

Keep Harvest on the move with the AWS UPTIME KIT.

Reduce down-time by having common maintenance items on-hand. AWS UPTIME KITS are available for all models of Airbar systems.

Parts Included:Parts Included:• Primary Drive Belt• Secondary Shaft• (4) Bearing & Flanges• (2) Nozzles & Gaskets• (2) Nozzle U-Bolts

Driven by our desire to offer the best solutions and support to our customers, wwe're not just any choice for air assisted harvesting, we're your choice. We simplified the concept of adding air tocombine headers and capitalizing on the benefits of air across a wide range of crops. We listen to our dealers and customers and use their feedback to ensure our AWS Airbar continues to be the best solution available. We take an active role in the agricultural sector and keep in touch with today's farming equipment, practices, and challenges. By using thoughtful, and challenges. By using thoughtful, robust design, superior customer service, and solid reliability to connect our proven product, seasoned customers, & ourselves, we are best suited to meet your needs.

Have a Question? Contact one of our Skilled Service Technicians for help.

Born from Service

Built on Reliability