505 King Avenue | Columbus, Ohio 43201-2696 | 614-424-6496 | [email protected] | www.mmpds.org
Announcing the
31st MMPDS Coordination Meeting September 12-15, 2017
Atlanta (Buckhead) Georgia Embassy Suites
Meeting Schedule
A detailed meeting schedule is attached and can also be found on the MMPDS website at www.mmpds.org.
Noteworthy:
• The Industrial Steering Group (ISG – members and invited guests only) and Government Steering
Group (GSG - members and invited guests only) will meet separately beginning at 8:00 am on
Tuesday, September 12th. At 2:45 pm, the ASG and MATSSG group meetings will begin,
concurrently; and all meeting attendees are invited to attend as appropriate for your organization.
• Wednesday, September 13th, will begin with the Guidelines Task Group (GTG) meeting from 8:00 am
to 3:00 pm. The ETWG meeting will take place at 3:15. An ETWG Agenda is forthcoming.
• Thursday, September 14th, multiple Task Group meetings will occur throughout the day. • A lunch buffet is included with meeting fees on Tuesday, Wednesday, and Thursday. • Friday, at 8:00 am, the General Coordination Committee (GCC) will take place. At 10:15 am,
depending on need, the meeting will continue, OR, there will be a demo of the newest version of MIDAS. Meetings will conclude by noon.
• A sortable version of the Agenda Summary is available on both the member SharePoint site, or for non-members, it can be found at www.mmpds.org, under the tab for Meetings.
Registration
Meeting attendees will receive a discounted rate for advanced registration if the completed Registration Form, including method of payment, is returned to Battelle before August 25. Registration rates can be found on the attached Meeting Registration Form. Credit Cards will not be charged until after the meeting has ended.
Hotel Accommodations
The Embassy Suites’ MMPDS Sleeping Room Group Rate is $140.00 USD. Cut-off date for reserving rooms is August 25, assuming rooms are not sold out prior to that date. It is strongly recommended that you make your reservation as soon as possible before rooms runout.
To make your hotel reservation, follow this link: http://embassysuites.hilton.com/en/es/groups/personalized/A/ATLLXES-BAT-20170911/index.jhtml?WT.mc_id=POG NOTE, if you want to reserve a room using any of the pre or post meeting days at the meeting rate, that reservation must be phoned in special. Please call Brittany Bowens at the Embassy Suites, 404-266-4828, Rates are offered for 3 days before and after the meeting, subject to availability.
You can also call in your reservation at 1-888-370-0985 and use Group Code “BAT”, however they will not be able to give you the rate outside of the meeting dates. There is a 24 hour cancellation policy. You must cancel by 3pm the day prior to arrival to avoid a cancellation fee of 1 night room and tax.
�.. Continued..�
505 King Avenue | Columbus, Ohio 43201-2696 | 614-424-6496 | [email protected] | www.mmpds.org 2
The Group room rate includes the following:
o Complimentary Hot Breakfast – 6:30am to 9:00am (Note there will still be a continental breakfast at the meeting.)
o Manager’s Reception - Free snacks and cold beverages from 5:30pm to 7:30 p.m.
o Wireless Internet Access – High speed Internet in all sleeping rooms and other areas. Self-Parking is discounted to $20.00 per day, and valet parking is $32 day.
Check In Time: 3:00pm Check Out Time: 12:00pm A valid credit card and photo ID to be presented at check in.
To learn more about the Embassy Suites Buckhead, click below:
http://embassysuites3.hilton.com/en/hotels/georgia/embassy-suites-by-hilton-atlanta-buckhead-ATLLXES/index.html
Questions? Please email Anne Mundy at [email protected]. We look forward to seeing you in Atlanta.
Time
7:30-8:00
8:00-10:00
10:00-10:15
10:15-11:00
11:00-12:00
12:00-1:00
1:00-2:30
2:30-2:45
2:45-3:00
3:00-3:15
3:15-4:00
4:00-5:00
5:00-6:00
Key:
ASG - Airframer Steering Group GTG - Guidelines Task Group
ETWG - Emerging Technology Working Group ISG - Industry Steering Group (members only)
FatWG - Fatigue Working Group MATSSG- Materials and Test Services Steering Group
FTG - Fastener Task Group MTG - Material Task Group
GCC - General Coordination Committee PSG - Propulsion Steering Group
GSG - Government Steering Group (members only) WWG - Welding Working Group
31st MMPDS Coordination Meeting
Preliminary ScheduleSeptember 12-15, 2017, Buckhead, Georgia
Tuesday Wednesday Thursday Friday
Continental Breakfast Continental Breakfast Continental Breakfast Continental Breakfast
ISG
(members
only)
GSG
(members
only)
GTG MTG FTG
GCC (Include Report
from Executive
Board, Steering
Groups, and Review
of Items)
Break Break Break Break
ISG
(members
only)
GSG
(members
only)
GTG MTG FTG
GCC continued or
MIDAS demonstration
as needed
Joint ISG/GSG
(members only)GTG MTG FTG
Break
ASG MATSSG
Break Break
ETWG
PSG WWG
(ASG if
needed)
Executive
BoardFatWG
Lunch
(buffet included in
fee)
Lunch
(buffet included in
fee)
Lunch
(buffet included in
fee)
Final Initial
03-14 MTG 1Review of Currency of Existing
Database on Legacy AlloysStatus J. Rubadue will give a status report.
04-21 FTG 8Fastener Tables of Sunset Review
InterestOn Hold M. Tefend will give a status report
08-23 FTG 8Sunset Review of Table 8.1.3.2.2(c),
NAS1921CStatus M. Tefend will give a status report
09-13 FTG 8Sunset Review of Table 8.1.3.2.3(a),
MS21140Agenda
Additional Data received. M. Tefend to present the
sunset shear analysis on this table.
09-16 GTG WWG 8Review of Section 8.2 Metallurgical
JointsAgenda
M. Tefend will present an agenda on this Item. Please
send any comments by August 11th to prepare final
agenda item.
10-13 MTG ASG 2 Wrought Steels S-Basis Summary Status J. Rubadue will give a status report.
10-14 MTG 3Wrought Aluminum Alloys with S-Basis
MinimumsStatus J. Rubadue will give a status report.
10-15 MTG 3Mechanical Properties for Aluminum
Alloy Forgings Status J. Rubadue will give a status report.
10-17 MTG 3Re-evaluate Legacy Alloy Stress-Strain
Curves in Chapter 3On Hold
No new stress-strain curves on legacy alloys have been
obtained since last meeting
10-25 GTG-F FTG 9Fastener Installation Parameters for
Joint Tension AllowablesAgenda
M. Tefend will present an agenda on this Item which
includes the suggested changes from Boeing's
presentation from the last meeting.
11-05 MTG 1 AMS Coordination Status
The AMS meeting is the week following MMPDS.
Information from the meeting will be included in the
minutes.
11-15 MTG 2Division of Low Alloy Steel Table
2.3.1.0(g2) Status J. Rubadue will give a status report.
11-38 FTG 8
Sunset Review of Flush Head,
Mechanical Lock Spindle Blind Rivet
Table 8.1.3.2.2(e) NAS 1921 M
AgendaLap Joint data Data received. M. Tefend to presnet the
sunset lap joint strength analysis on this table
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
11-43 FTG 8Supporting Data and Basis
Identification for Table 8.1.2(b)Status M. Tefend will give a status report
12-16 MTGASG/
MATSSG2
Footnote for Steel When Test
Specimen is Not From Full ThicknessStatus J. Rubadue will give a status report.
12-17 MTG MATSSG 6
Footnote for Non-Ferrous Alloys Test
Specimen When Not From Full
Thickness
On Hold This item is on hold until Item 12-16 is resolved.
12-44 MTG 5Design Allowable Properties for Ti-3Al-
2.5V TubingStatus
Requesting additional data for tubing per AMS4943 (90
ksi hydraulic seamless tubing) to be used with orbital
weld data. Some data are available, but more are
needed for A/B-basis.
12-45 MTG 2 21-6-9 Tubing StatusData are requested for AMS5561 tubing, and AMS5595
sheet & plate
12-50 GTG-F FTG 9Evaluation of new Regression and
Confidence Models for Lap Joint TestsAgenda M. Tefend will present an agenda on this Item.
12-52 GTG-F FTG 9 Fastener Minimum t/D Requirements Agenda M. Tefend will present an agenda on this Item.
12-89 GTG PSG 9Target Materials for Propulsion
ApplicationsStatus This is a placeholder item for the PSG
12-105 GTG-F FTG 9Modification to the Sunset Criteria
ProceduresOn Hold M. Tefend will give a status report
13-32 MTG 3
Bearing Strength Reduction for
Edgewise Orientation from Extruded
Bar
On Hold
Available data is analyzed and included in appropriate
alloy tables. Would like to have data from other
suppliers before determining knock-down factors that
can be used where other orientation is unknown.
13-34 MTG 5Addition of AMS 4919 Ti-6-2-4-2 Plate
PropertiesStatus Data are needed.
13-35 MTG MATSSG 6
Upgrade S-Basis to A- and B-Basis for
718 Bar Nickel-Base Alloys per AMS
5962
Agenda
J. Rubadue will present this agenda item. MATSSG is to
review footnote to address concern on consistency of
through-thickness properties.
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
13-43 MTG 3Addition of ST Bearing Properties for
7085-T7451 PlateStatus Waiting on data
13-50 GTG 9 ASTM Coordination Status A status report on related ASTM interest will be given.
14-13 GTG 9Recommended Test Orientations and
Test Plane for Round ProductAgenda
J. Rubadue will present this item in conjunction with
Item 15-12.
14-19 GTG 9Inclusion of Kisi Fracture Toughness
DataOn Hold R. Rice will review status
14-21 GTG WWG 9
Update of Section 9.2.4.8 Fusion
Welded Joints to Clarify Method and
Basis
Status M. Tefend will give a status report
14-24 MTG 4 thru 7
Identification of Stress-Strain Curves
Which Have Been Evaluated for 2-
Shape Factor for Chapters 4-7
On Hold R. Rice will review status
14-28 FTG 8
Sunset Review of Table 8.1.4.2(i),
LGPL2SC-V Pin, 3SLC-C Collar in Clad
7075-T6
Status M. Tefend will give a status report
14-61 GTG PSG 9 Update Creep Guidelines Agenda D.Hall will review the agenda item
14-62 GTG 9Evaluate Inclusion of other Fracture
Toughness Data (JIC, KJIC)Agenda R.Rice will review the agenda item
14-66 MTG 2Addition of 15-5PH Sheet S-Basis per
AMS 5862 for H1025 Condition Status Waiting on data
14-67 MTG 3Addition of 3-6 Inch Range for 7075-
T73X Bar and Rod per AMS 4124Status Waiting on data
15-12 GTG 9 Bearing Failure Modes AgendaJ. Rubadue will present this item in conjunction with
Item 14-13.
15-13 MTG 9Clarification of Shear Orientation for
Legacy AlloysStatus J. Rubadue will give a status report.
15-19 GTG-F FTG 9Verification of Secondary Modulus
Methods for FastenersStatus M. Tefend will give a status report
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
15-33 GTG 8Update Design Reference for Section
8.3 BearingsAgenda J. Rubadue will present this agenda item.
15-34 GTG 9 Stress-Strain Curve Extension Agenda R.Rice will review the agenda item
15-36 GTG 9Modification of Indirect Analysis
EquationAgenda R.Rice will review the agenda item
15-37 GTG 9Guidelines for Strain-Rate Sensitive
MaterialsHandout R.Rice will review this handout
15-38 GTG 9
Reevaluation of Degrees of Freedom
Calculation for Regression with Effect
of Temperature
StatusSee results from 16-23 for a comparison of the current
and proposed method(s).
15-40 GTGASG/MAT
SSG9
Guidelines for When Specimens Are
Not From Full ThicknessStatus J. Rubadue will give a status report.
15-42 MTG 3Casting Allowables for 15-5PH and 17-
4PH steelPresentation J. Shah will make a presentation
15-45 GTG MATSSG 9
Requirement of Additional
Information on Specimen Shapes for
Forgings, Extrusions, and Castings
Status J. Rubadue will give a status report.
15-46 GTG MATSSG 9Cross-Sectional Information
Requirement for ExtrusionsPresentation The Extrusion Working Group will give a presentation.
15-51 GTG
ASG/
MATSSG/
GSG
9Periodic Testing of Materials for
Derived PropertiesAgenda This agenda item affects Item 17-23 also.
15-53 MTG MATSSG 3Mechanical Properties for 7099-
T7451, T7651 Aluminum Alloy PlateAgenda
J. Rubadue will present this agenda item. MATSSG will
review the introductory section.
16-02 GTG 9Updates to Strain Departure Methods
for Stress-Strain Curve AnalysesOn Hold R. Rice will review status
16-03 MTG 3
Modulus and Stress-Strain Curves for
2050-T852 Aluminum Alloy Die
Forging
Agenda R.Rice will review the agenda item
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
16-10 MTG ASG 3Legacy Alloy 7075-T6 Indirect
Properties Update Status ASG will give an update.
16-12 FTGIdentifying Basis of Fastener Shear
Strength on Remaining TablesAgenda
Additional Data received from TriMas. M. Tefend to
present an agenda item on the data received.
16-13 FTG 8Corrections to Table 8.1.3.2.2(c) NAS
1921COn Hold M. Tefend will give a status report
16-15 GTG ETWG 9 Emerging Materials Status The agenda for ETWG will be posted once it is finalized.
16-20 GTG 9Equivalency Testing Assuming Change
in Process (From Item 11-40)Agenda R. Rice will present this agenda item.
16-22 MTG multiIdentification of Forging Types for
Tables with A- and B-basis Agenda J. Rubadue will present this agenda item.
16-23 MTG PSG 6
Re-evaluate Item 10-08 for Effect of
Temperature Curve vs Specification
Minimums
Agenda
R. Rice will present this agenda to compare results using
current method with results using proposed method
from Item 15-38.
16-24 GTG 9Guidelines for Modulus When Average
Value is InsufficientAgenda R. Rice will present this agenda item.
16-25 MTG MATSSG 6Extension of 718 Bar Gage Range for
AMS 5662 and AMS 5663 Agenda
J. Rubadue will present this agenda item. The analysis
was presented at the 29th meeting.
16-27 MTG 3Expansion of 2195-T8 Design
Allowable PropertiesAgenda J. Rubadue will present this agenda item.
16-29 GTG 1Review of Section 1.4.7 Bearing
PropertiesAgenda D. Hall will present this agenda item.
16-30 MTG 2AM-355 Stainless Steel in SCT850
ConditionStatus J. Rubadue will give a status report.
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
16-32 MTG 3Mechanical Properties for 7097-T7651
Aluminum Alloy PlateAgenda J. Rubadue will review this agenda item
16-34 GTG 9
Review Guideline on Stress-Strain
Submittal for Number of Curves per
Thickness Range
Agenda R. Rice will present this agenda item.
16-36 GTG-F FTG 9
Use of T99 as A-Basis When Higher
than Specification for Fastener Shear
and Tension
Agenda M. Tefend will present an agenda on this Item.
16-37 GTG-F FTG 1Chapter 1 Guidelines on Fastener
Design Allowable UsageAgenda M. Tefend will present an agenda on this Item.
16-39 MTG 3 7010-T7451 Re-Analysis Status
If data are received in time, an agenda item will be
prepared. Data in hand from 2 suppliers. Waiting on
data from 1 other.
16-40 MTG 7Estimated Values in Table 7.3.2.0(c )
Copper Beryllium StripStatus
Airframers are asked to see if they are using this
material.
16-41 GTG 9Update Static Property Examples in
Section 9.8.1Status D. Hall will provide a status report on this item
17-01 MTG 3Expand range for 2024-T351 AMS
4120 to 8.0 inchesAgenda J. Rubadue will present this agenda item.
17-06a MTG 3Mechanical Properties for A206.0-T4
Sand CastingsAgenda D. Hall will provide a status report on this item
17-06b MTG 3Mechanical Properties for A206.0-T71
Sand CastingsAgenda D. Hall will provide a status report on this item
17-07 MTG 3Stress Corrosion Cracking Data for
7136 Aluminum Alloy ExtrusionsAgenda J. Rubadue will present this agenda item.
17-09 MTG 3 Fatigue Curves for 2099-T83 Extrusion On Hold Low priority item, no progress.
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
17-10 MTG 4 Fatigue Curve for 2099-T81 Extrusion On Hold Low priority item, no progress.
17-11 MTG 5Fatigue Curve for 2026-T3511
ExtrusionOn Hold Low priority item, no progress.
17-12 MTG 6 Fatigue Curve for 2624-T351 Plate Agenda R.Rice will review the agenda item
17-19 MTG 2
Addition of Transverse Bearing
Strength Properties for Custom 465
Bar
StatusJ. Rubadue will give a status report. Data are requested
for the H950 and H1000 conditions.
17-23 GTG 9Legacy Alloy Review Strategy – Near
TermAgenda This Agenda item affects Item 15-51 also.
17-25 GTG 9Re-evaluation of Reduced Ratio
Sample Size DeterminationAgenda D.Hall will review the agenda item.
17-26 GTG ASG 9Guidelines for Generation and Use of
A/B Allowables for CastingsAgenda D. Hall will present this agenda item.
17-27 FatWG 9Add Requirement to Chapter 9 Fatigue
Correlative InformationAgenda R. Rice will present this agenda item.
17-28 GTG FTG 9
Consideration of Origin in Multiple
Regression Analysis for Joint
Allowables
Agenda M. Tefend will present an agenda on this Item.
17-29 GTG-F FTG 9
Replacement of T90 Yield Curve with a
Multiple-Regression Typical Yield
Curve for Joint Allowables
Agenda M. Tefend will present an agenda on this Item.
17-30 GTG-F FTG 9Revision of Table Format for Joint
AllowablesAgenda M. Tefend will present an agenda on this Item.
17-31 FTG 9Sunset Shear Strength Rule Criteria
AdditionAgenda M. Tefend will present an agenda on this Item.
17-32 GTG-F FTG 8 Edit Table 8.1.5.1 Agenda M. Tefend will present an agenda on this Item.
17-33 GTG 9Alternative Fitting Function for Effect
of Temperature DataAgenda D. Hall will review the agenda item.
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
17-34 GTG SSWG 9Guidelines for Rejection of Stress-
Strain Curves from Parametric AnalysisHandout R.Rice will review this handout
17-35 MTG 5Re-analysis of ATI 425 Sheet Typical
Stress-Strain CurvesAgenda
Typical stress-strain through yield curves from Item 16-
18 will be re-analyzed to consider non monotonically
increasing stress-strain.
17-36 MTG 7Design Allowable Properties for
Toughmet 3 Plate per AMS4595Agenda
J. Rubadue will present this item if data are submitted in
time.
17-37 MTG 5
Revise Bearing Properties for Single
Melt ATI 425 Cold Rolled Sheet and
Strip (AMS6949)
Agenda
New section approved in Item 16-18 for MMPDS-12.
Additional bearing tests were conducted. J. Rubadue
will present this item.
17-38 MTG 3Editorial Correction in Fatigue Figure
Labels for 2024-T3 SheetAgenda
This item corrects the figure legend for 4 S/N figures
with notched data from Stress Ratio to Mean Stress.
17-39 GTG Stress-Strain Curve Working Group Status
Edwin will give a status report for this new group
(named SSCWG) would meet by telecoms between
meeting; E. Hernandez-Otero (lead), P. Vanderpol, R.
Brazil, J. Rossi, R. Rice, C. Heine, P. Wheelock, and R.
Reinmuller. A separate time will not be scheduled for
MMPDS meetings.
17-40 MTG 3
Removal of Fracture Toughness Data
for 7085-T7651 Plate in the 7-8 inch
range
Agenda J. Rubadue will present this agenda item.
17-41 MTG 3R-Curve for Alclad 2029-T8 Aluminum
Alloy SheetStatus R-curve data were submitted.
17-42 MTG multi Stabilization of AMS Specifications Agenda J. Rubadue will present this agenda item.
17-43 MTG 3R-Curve for 2624-T39 Aluminum Alloy
PlateStatus R-curve data were submitted.
Final Initial
31st MMPDS Coordination Meeting
AGENDA ITEM SUMMARY - Preliminary
SORTED BY ITEM NUMBER
Item NoResponsible Group
Chpt Title Type 31st Meeting Description
17-44 GTG 9Clarification of Ten-Lot Minimum
Requirement for Derived PropertiesAgenda
J. Rubadue will present this agenda item submitted by E.
Hernandez-Otero.
17-NIN FatWG Review Section 9.6.1 Status
D. Hall will lead discussions on review of this section.
Members are asked to review the section to determine
if there is a need to update it.
17-NIN MTG MATSSG 3Expand Thickness Range of 6061-T6X
Aluminum Alloy Plate to 12 inchesStatus
J. Rubadue will present a status report. Producers are
asked if there is an interest in increasing the AMS
specification(s) thickness range. AMS4027-T651 goes to
6.000 inch.
17-NIN MTG 3Inclusion of Properties for AMS 4221,
2124-T8151 PlateStatus Data are requested.
17-NIN MTG PSGSupplemental Data for Ti-6-2-4-2
"Product Form" Status R. Rice will give a status report on what data is on hand.
17-NIN MTG FCG Analysis for 2397-T87 Plate On Hold Low priority item, no progress.
17-NIN MTGRe-evaluate Fatigue Analysis for 2024-
T4 Multiple Product FormsOn Hold
This fatigue curve covers multiple product forms and
was done using equivalent stress method. It was noted
that one of the curves does not go through data points.
Re-evalute to see if this is a product form that needs to
be analyzed separately. Since fatigue is a supplemental
property, this item is on hold until balloted.
17-NIN GTG ETWGNorsk Titanium RPD™ Ti-6Al-4V
Material.Presentation P. Sodouri will give a presentation in the ETWG.
17-NIN MTGSteel Founders Society of America
(SFSA) DID ProgramPresentation
David Poweleit, from SFSA, would like to present a
proposal to include A/B-basis allowables for several
steel alloys.
ISG GTGClarification of ISG/MMPDS
Numbering SystemStatus
This has been assigned as ISG Agenda item 17-01. It will
be removed from the MMPDS Agenda item list after the
31st meeting
31st MMPDS Coordination Meeting Registration Form
Battelle Memorial Institute - 505 King Avenue | Columbus, Ohio 43201-2696 | 614-424-6496 | [email protected] | www.battelle.org | www.mmpds.org
Today’s Date:
Attendee Information:
Name
Company
Address
City
State, Zip Code, Country
Phone
MMPDS Steering Group Membership Status (please checkmark one):
REGISTRATION TYPE (Check One)
General Attendance (2 or More Dates)
One Day Only (Single Date of Meeting)
Name on Card:
Card Number:
Expiration Date:
Amount USD:
Secure ID Code: Zipcode for Billing Address:
Tuesday, September 12, 2017 8:00 am –ISG (Members Only)
8:00 am –GSG (Members Only) 1:00 pm - JOINT (GSG/ISG Members) 2:45 pm – MATSSG 2:45 pm – ASG
Wednesday, September 13, 2017 8:00 am – GTG 1:00 pm – GTG
3:15 pm – ETWG
Thursday, September 14, 2017 8:00 am – MTG
8:00 am – FTG
3:15 pm – PSG 3:15 pm – WWG
5:00 pm - FatWG
Friday,September 15, 2017 8:00 am – GCC 10:15 am – GCC or Poss MIDAS demo
Register in advance and SAVE! The advanced registration discount closes on August 25, 2017. The completed Meeting Registration
Form, including information for method of payment,
must be received at Battelle by this date in order to take advantage of the discounted rate.
Member Non-Member
METHOD OF PAYMENT
MasterCard
Visa
American Express
Discover
Check (Make out to Battelle)
RATES (includes buffet lunch on Tues, Wed, and Thur)
Prior to August 25, 2017 After August 25, 2017 Member - $550 USD (2 or more dates) Members & Non-Members
Member - $300 USD (1 date) $700 USD (2 or more dates)
Non-Member - $600 USD (2 or more dates) $400 USD (One Date)
Non-Member - $350 USD (1 Date)