> For compacting the sharp sand
SkipSpadeVibrating PlateTurf CutterSharp Stanley KnifeLarge pair of scissorsSharp SandTreated TimberHammer and NailsWeed MembraneARTIFICIAL GRASS
HOW TO INSTALL
Materials you’ll need
> We suggest 1 Ton per 10m 2
> For compacting the sharp sand> The easiest method of removing your old lawn
> For removed turf, soil and vegetation
Ground Preparation for Gardens
Remove all turf, vegetation and rocks down to bare earth.Remove enough soil to be able to add a 25-40mmlayer of sharp sand.
Use a weed killerto kill the weedsdown to the roots.
Hire a turf cutter tomake turf removalfar easier.
Installing sub base and weed membraneA 25-40mm sub base of sand is installed
Nail or Peg the weed membraneto the sand sub base.
Spread, level and compact thesub base with a hand rolleror vibrating plate.
During dry conditionswet the sub base
a day before installation
In certain circumstances you mayneed to use a treated wooden border.
Installing the grassRoll out the grass. As all rolls have a directional pile, ensurethat all rolls are laid out in the same direction*.
Cut carefully into thebacking and trim theartificial grass.
Once the grass is layed brush in 4kg of kiln dry sand per 1m .
Fix with adhesive or stainlessscrews to treated wooden
timber edging or withstainless nails into the sub base.
*If joining grass
Joining the grass
ARTIFICIALGRASSFOR LESS
Seaming tape is used to join rolls together.
Unroll the seaming tape along the seam line,ensuring equal tape laid centrally along theseam.
Before applying the adhesive, fix theseaming tape to the sub base withstainless steel nails.
PART
PART
PART
PART
1
3
4
2
0800 148 8654 [email protected]