Atlas Copco Exploration Products
Bits product catalogue
Craelius™ exploration drilling tools
2
Product catalogue – Craelius bits
Jet technology ...................................................4
Golden Jet bits ................................................. 5
Impregnated bits .............................................. 6
Surface set bits ................................................. 8
Shells and casing ............................................. 9
TC bits ...............................................................10
PDC bits ............................................................11
Drilling parameters ......................................... 12
Core bit data .................................................. 14
Bit profiles ........................................................16
Codes ...............................................................17
Ordering information ...............................18 - 43
Bits for conventional core barrels ............. 18
Bits for wireline core barrels ...................... 29
Special diamond tools ................................ 42
Hole opener/reamer .................................... 43
Casing shoes ................................................44
Test report chart .............................................. 45
Super cutter range ...........................................46
Bit application chart ........................................47
3
Atlas Copco Geotechnical Drilling and Exploration
Atlas Copco Geotechnical Drilling and Exploration, GDE, can offer the equipment needed for all underground and surface exploration applica-tions. This includes rigs and a full range of high tech and high quality products, ITH equipment such as wireline, drill rods and conventional core barrels as well as casing and diamond bits – all designed to maxim-ise our customers´ profitability.
All our products are designed to help the user minimize down-time and maximize productivity. Be assured we are ISO certified. However, if a problem should occur, we will quickly be at your site thanks to the world-wide Atlas Copco organisation.
Just contact your local Atlas Copco representative.
A bit close to the dreamOne hole, one bit. That´s the dream of every core driller who´s ever had to lift a heavy drillstring out of a deep hole to change a worn out bit.
But it helps to know that Atlas Copco is determined to make the dream come true. Take the new Golden JET bit for example. With a 16 mm high matrix it outlives all other diamond core drilling bits on the market. That means more time in the hole, less manual work and reduced costs.
Golden JET technology
With Golden JET bits you will boost your productiv-ity and take another step closer to the dream. One hole, one bit.
Golden JET bits are developed and manufactured by Atlas Copco within the Super Cutter range.
5
Golden JET bits
One hole, one bitAtlas Copco has launched a new range of long life wire line bits within the Craelius Super Cutter series. The Golden JET bit is the result of Atlas Copco´s commitment to develop unique products which improve our customers competitiveness.
Higher crown impregnation will logically lead to longer life. The JET design from Craelius diamond bits is a patented in-novative solution with increased impregnation height of the crown, to give extended bit life.
The Golden JET bits reflect our ambition to develop products to improve our customers cost effiency. Each meter we prolong the core production instead of wasting time and money on rod handling, is added value for the customer. We are not there yet – but we are getting closer to ’’One hole, one bit’’.
Production instead of rod handling
JET bit characteristicsnExtremely long life nWide range of rock formations nHigh penetration rates
Our unique solution, with increased impregnation height (currently 16 mm), results in an extremely stable crown.
By reducing the number of waterways, we created wider seg-ments and larger base for stronger adhesion to the bit body. To maintain optimal cooling and cutting transportation, the segments are designed with slots in both outside and inside.
This unique, protected solution gives a long bit life combined with high penetration rate. A combination of the JET design and the range of matrices from the Super Cutter series will outperform any other bit on the market.
6
SC ROCK GROUP INCREASING MATRIX APPLICATION (ROCK CHARACTERISTICS) HARDNESS
SC10 Extremely hard, non-abrasive, fine grain, very competent.
SC9-10 Very hard – extremly hard, slightly abrasive.
SC8-9 Hard – very hard, slightly abrasive.
KS (S++) Hard – very hard, polishing.
SC7-9 Medium hard – very hard, moderately abrasive.
SC6-8 Medium hard – hard, polishing + mixed.
KX Medium hard – hard, polishing + mixed.
SC5-6 Medium soft – hard, abrasive, fractured.
SC5 Medium soft, abrasive, fractured.
SC2 Extremely abrasive, highly fractured.
Impregnated diamond drill bits are designed to perform as grinders. Diamonds are embedded in an infiltred or sintered matrix. The matrix erodes away at the same rate as the dia-monds become worn and rounded. Thus new sharp diamonds are exposed to continue cutting through the rock.
The combination of diamonds and matrix determine the per-formance of an impregnated bit. The simultaneous erosion of the matrix and the diamonds makes the bit self sharpening.
The ideal combination of optimal penetration rate and wear resistance matched to achieve the ultimate in drilling economy.
In most geological formations, impregnated bits are more economical to use than surface set bits as they provide ad-ditional benefits:
n Greater resistance to wear in most formations, particularly in fissured and fractured formations.
n Less sensitive to abuse, rough handling and improper use.
DiamondsOnly synthetic diamonds, except for gauge stones, are used in the manufacture of Atlas Copco impregnated bits. The constancy of shape, granular size, and strength make syn-thetic diamonds better than natural stones.
The diamonds are carefully selected by quality and size for the application. Through advanced manufacturing technology an extensive range of drilling requirements can be satisfied.
Continuous control of the processes at each step in the manu-facturing ensures that all bits are of identical quality. This consistent high quality means more drill metres per bit.
Impregnated bits
Also see page 46 for Super cutter (SC) range and page 47 for bit application chart.
7
Impregnated bitsCONDITIONS SC10 SC9-10 SC8-9 SC7-9 SC6-8 SC5-6 SC4-5 SC2
Extremely hard rock - Non abrasive rock x (x)
Very hard rock - Slightly abrasive rock x x x
Hard rock - Medium hard, slightly abrasive x x
Very hard rock - Hard, slightly abrasive (x) x x x
Very hard rock - Hard, abrasive rock (x) x x x
Hard rock - Medium hard rock, abrasive x x x x
Medium hard rock - Soft rock, fractured (x) (x) x x
High penetration x x x x x x x
Moderate penetration x
High water flow x x x x x x x x
Low water flow (x) x (x) (x)
(x) = Possible to use, but not the recommended choice
Crown heightStandard impregnated drill bits are available with different matrix heights:
n Low (2):6.5 mm, Conventional bits n Standard (3):9.5 mm, Conventional bits and WL bits n Extra high (4):12.5 mm, Wire line bits n Super (5):16.0 mm, Wire line bits
Low and standard height is used for conventional bits where bit life does not effect the number of round trips and when large wear of the bit diameter is anticipated (meaning that extra high matrix cannot be fully utilized).
For wire line bits, Extra or Super matrix height is generally recommended.
ProfilesMost impregnated bits have W-profile.
8
Surface set bitsAtlas Copco surface set bits are manufactured to the highest standards in the industry for the ultimate in drilling perform-ance.
Atlas Copco surface set bits have proven to have a high penetration rate, long service life, and best adaptability to changing formations. The diamonds in these bits are ar-ranged in patterns developed from many years of practical field experience. The patterns vary according to the size of the stones used.
The patterns are important for the service life and
penetration rate of the bit.
The diamonds used are imbedded in a hard matrix with high resistance to erosion.
MatrixSurface set bits are manufactured using a universal hard type of matrix for all formations.
Semi-round
Multi-step
Two wide step (face discharge)
Concave profile (Non-coring)
Diamond qualityThe standard range of natural diamonds for surface set bits is chosen in a special allround grade with special quality. The quality includes selected and processed diamonds with a highly polished surface. These stones have a high impact resistance and may be considered as an universal type. Rec-ommended for soft to medium hard formations.
Diamond sizes (spc – stones per carat)As a general rule; the softer formation, the larger the dia-monds used i.e. 20 to 25 spc. In hard formation, smaller diamonds 30 to 50 spc are typical.
Atlas Copco standard diamond sizes are: 20/25 and 30/35 spc 1 carat = Diamond weight of 0.2 g Diamond content is measured in carat (CRT).
Other diamond qualities and sizes on request.
ProfilesSurface set drill bits are available in different profiles to obtain optimal drilling performance.
Standard profiles for surface set core bits:
n Semi-round n Multi-step n Two wide step (face discharge) n Surface set n Non-coring bits with concave profile.
9
Shells and casingReaming shellsReaming shells are placed behind the drill bit on the core barrel to maintain the correct hole diameter and stabilize the core barrel.
A reaming shell has to be replaced when its diameter be-comes less than the diameter of the new bit. In this way only the very last part of the hole has to be reamed when a new bit is inserted. A reaming shell also helps to stabilize the core barrel. Reaming shells are available for all types of core bar-rels and drill bits.
Surface set reaming shellsStandard Atlas Copco surface set reaming shell set with specially selected diamonds and PDC pins. Well designed waterways, reinforced with PDC pins, facilitate effective flushing and contribute to long service life and good drilling economy for both reaming shells and drill bits.
Reaming shells are avialable in different designs:
n 10" Double ring reaming shell available only for BQ, NQ, HQ (need inner tube adjustment).
n FH special heavy duty design for long life with extra stabilization.
n STD (Standard design).
Casing shoesAtlas Copco manufactures a comprehensive range of dia-mond and tungsten carbide (Corborit) casing shoes for stand-ard drilling or positioning casing tubes into drill holes.
Casing shoes have cutting segments on the front and exterior, while the interior is smooth. The inner diameter of the casing shoe is sufficiently large to permit free passage of drill bits and core barrels in corresponding sizes.
n Impregnated casing shoe bits are manufactured with very hard matrix.
10" double ring FH heavy duty STD standard
Casing shoe: impregnated
10
Tungsten Carbide (TC) bitsCarbide bits are normally used for coring in softer rock for-mations, overburden drilling, and cleaning of drill holes.
Atlas Copco manufactures two different types of tungsten carbide bits:
n TC bits with octagonal inserts nTC CORBORIT® bits
TC bits with octagonal insertsThese bits have octagonal tungsten carbide inserts what are ground at an angle of 10° to form the cutting edges. The quality of the tungsten carbide chosen has been specially de-veloped for rotary drilling to give high wear resistance. The carbide inserts can be reground.
TC Corborit® bits Corborit is another type of tungsten carbide bits manufac-tured of crushed carbide chips with a granular size of 2-5 mm, mixed with a special alloy.
Corborit bits have considerably more cutting edges than standard TC bits and are recommended in medium to me-dium hard sedimentary formations.
Corborit bits cause less vibration and offer better core recov-ery than standard TC bits.
All TC bits can be used in clean-out operations, e.g. for the removal of steel fragments from a drill hole.
TC bits
A range of bits designed especially for soil investigations and geotechnical drilling, but also suitable in some applications for mineral exploration.
Bits for soil investigations andgeotechnical drilling
TC Corborit
TC octagonal insert
11
PDC bits
PDC (Poly-crystalline Diamond Composite) bitsPDC bits are an alternative to TC bits and surface set dia-mond bits, when drilling in non-consolidated and medium hard rock formations.
We offert two types of PDC bits:
n Diapax n Tripax
DiapaxBits with brazed round PDC inserts.
TripaxBits with brazed cubic or triangular PDC inserts embedded in the matrix. Bits with cubic inserts available with sawtooth profile.
Diapax
Tripax with triangular inserts Tripax with cubic inserts
12
Drilling parametersDrilling recommendationsTo select a suitable diamond bit for a given situation, basic information is needed:
n Geology n Type and size of core barrel n Flushing media
The final performance with selected bit depends on following parameters controlled by the operator:
n WOB – weight on bit n ROP – rate of penetration n RPM – revolution per minute n RPI/RPC – revolution per inch/cm n Flushing
Craelius impregnated diamond bits are supplied with recom-mended drilling parameters for best performance.
Sometimes an impregnated drill bit become blunt. Reason could be, difficult drilling conditions, hard formation, wrong drilling parameters, wrong bit type etc.
To sharpen an impregnated bit is a delicate process. If sharp-ening is not correct done, you will loose matrix and bit life. Momentarily increase the WOB by approximately 15-25%, at the same time, slowly reduce water flow to a level not less than what is indicated on the bit sticker. When the bit begins to sharpen, noticed by increase in drill system pressure and lower rotation speed, reduce the WOB and increase water flow to normal value.
Weight on bitWeight on bit (WOB) is not an operation parameter, the value is a result to maintain a constant penetration rate (ROP). Di-amec APC drill adjust WOB automatically for a preset ROP. The value of WOB for a chosen ROP indicates the actual drilling condition. Too high WOB value might cause problem such as:
n Excessive wear on bit n Hole deviation n Damage or wear on core barrel and rods
Please note!Recommended max WOB in the bit sticker is max allowed value to avoid damage. Temporary high WOB may be ap-plied to sharpen the bit. Too low WOB will polish the bit and it will loose its self-sharpening ability.
Penetration ratePenetration rate (ROP) is a very important drilling parameter especially for impregnated bits. The value should be kept constant and set as high as possible. High ROP keeps the bit sharp and return best performance.ROP depends on follow-ing conditions:
n Bit type and size n Capacity of core drill n Formation n Hole depth n Hole deviation n Flushing
Revolution per minuteImpregnated bits should generally be used with high revolu-tion per minute (RPM). Depending on bit diameter, rock condition and machine capacity.
Peripherical speed 2-5 m/s is recommended for impregnated bits. For surface set diamond bits peripherical speed 1-3m/s is recommended.
The RPM diagram gives a rough recommendation for RPM-related to bit type and hole diameter.
CRAELIUS diamond drill bit
Bit O.D. 56.B,66 Application SC4-5 Rev/min 700-1000 (Higher RPM for higher penetration rate) Penetration rate 8-20 cm/min (3-8 in/min) Water flow Min 25 l/min (Sharpens at 18 l/min) Max rate on bit (WOB) 32 kN (7200 lb) Rock Group (2-4) Hard-Soft very abrasive rock Remark 18 l/min water shortly to sharpen the bit
A Craelius product label with recommended drilling parameters
RPM diagram recommendations
RPM
mm
Impregnated
Surface set
Corborit
TC-bit
Tripax
Diapax
3 500
3 000
2 500
2 000
1 500
1 000
500
A46 56 66 76 86 101 116 146131
B N H P S
13
0 10 20 30 40 50Fluid velocity (cm/s)
Core barrel / Drill rod
Flow
rate
(l/m
in)
Wireline Metric DCDMA0
20
40
60
80
100
120
140
160
180
200
Example: A 76 mm diameter hole is to be drilled, the drill rod diameter is 53 mm and the desired flushing water velocity is 40 cm/s. Find the line for the 76 mm hole/53 mm drill rod; then find the velocity 40 cm/s on the curve’s X-axis. Follow the line 76/50 until it bisects the 40 cm/s line, then follow a horizontal line to the left line and read off the water volume = 63 l/min.
(*) GEOBOR Method I (#) GEOBOR Methods II, III.
Drilling parametersFlushingParticularly for impregnated bits, bit performance is strongly dependent on water flushing. The flushing has three pur-poses: cooling the bit, lubricating the bit and drill string and to lift up the cuttings. Some bit types need a lot of water to perform well, others do not.
For most bit types a reduced amount of water sharpens the bit and reduces bit life, while a lot of water can polish the bit but increase the bit life. This is most valid in hard and polish-ing rock.
Suitable amount of water for each bit type is stated on the sticker for drilling parameters.
The required cutting volume to lift up the cuttings, depends on hole diameter and drill rod size. Required water volume can be calculated in the diagram below.
Always use the higher volume of the values in the dia-gram and recommended on the bit sticker. It is highly recommended to use an accurate flow meter.
Revolution per rate of penetrationRevolution per inch (RPI) or revolution per centimetre (RPC) of advance has been developed as an index to main-tain correct relationship between RPM and ROP.
Today Atlas Copco bits are design to perform with much higher ROP than the index originally was based on. The index should be considered as a starting point.
Index recommendation: RPI 200-250 (RPC 80-100) For recommended RPM 1200 you can expect ROP 6" (15cm) per minute
ROP = RPM/RPI = 1200/200 = 6 (inch/min) ROP = RPM/RPC = 1200/80 = 15 (cm/min)
Please note!Higher ROP Higher RPM Higher flow rate
AGM, AOTW AQ
46/43 A/AWBGM, BOTW
B, BO, BQ 56/53
NGM, NTW
H, OK, HQN/NW
56/43
NO2, NO3, NO, NQ, NQ3
66/53H/HW
101 HWPG, PQ, S GEOBOR (*)
66/43
N/BW
S GEOBOR (#)76/53
N/AW76/43
66/53
H/NW116 HW
86/43
101 NW
B/AW
Water velocities and water quantities for various hole diameters.
14
Core bit data
Size DesignHole diameter Core diameter Hole area Core area Cutting area
% of hole areamm in mm in cm2 in2 cm2 in2
A Q** 48 1.89 26,9 1.06 18,1 2.81 5,7 0.88 68.5
WG 30,0 1.19 7,1 1.10 60.8
WM 30,0 1.19 7,1 1.10 60.8
GM,OTW** 30,3 1.19 7,3 1.13 59.0
QTK** 30,5 1.20 7,3 1.13 59.6
48 JKT 35,3 1,39 9,8 1.52 45.9
48 LTK 35,3 1,39 9,8 1.52 45.9
48 TT 35,3 1,39 9,8 1.52 45.9
B Q3** 60,0 2.36 33,5 1.31 28,3 4.37 8,8 1.36 68.7
Q** 36,4 1.43 15,8 2.45 44.0
QTK** 40,7 1.60 13,0 2.02 54.1
GM, OTW, B2** 42,0 1, 66 13,9 2.17 50.2
WG 42,0 1.66 13,9 2.16 50.7
WM 42,0 1.66 13,9 2.16 50.7
60 LTK 44,0 1,73 15,2 2.35 46.3
60 TT 45,2 1,78 16,0 2,48 43.5
N Q3** 75,6 2.98 45,1 1.77 45,0 6.96 15,9 2.47 64.6
3/50** 50,2 1.97 19,8 3.0 56.0
Q** 47,6 1.88 17,8 2.76 60.4
Q2** 50,7 2.0 20,1 3.12 55.3
WG 54,7 2.16 23,5 3.64 47.7
WM 54,7 2.16 23,5 3.64 47.7
GM** 56,1 2.21 24,8 3.86 44.4
TNW 60,5 2.38 28,7 4.45 36.2
H Q3** 96,1 3.78 61,1 2.41 72,8 11.29 29,3 4.5 59.7
Q** 63,5 2.5 31,7 4.91 56.5
WG 99,2 3.91 76,2 3.0 45,6 7.07 41.0
P Q,G** 122,7 4.81 85,0 3.34 117,2 18.24 56,7 8.76 51.6
G3/Q3** 122,7 4.81 83,0 3.26 54,1 8.38 53.8
S GEOBOR** 146,0 5.75 102,0 4.05 167,3 26.03 81,7 12.7 51.7
GEOBOR** 150,0* 5.91 102,0 4.02 176,6 27.3 81,7 12.7 53.7
DCDMA design
* Hole diameter with pilot bit ** Wire line core barrel system
15
Core bit dataMetric design
Size DesignHole diameter Core diameter Hole area Core area Cutting area
% of hole areamm in mm in cm2 in2 cm2 in2
46 TT 46,5 1.82 35,3 1.39 16,8 2.6 9,8 1.52 41.7
T2 31,7 1.25 7,9 1.22 53.0
B 31,7 1.25 7,9 1.22 53.0
56 TT 56,5 2.22 45,2 1.78 24,9 3.86 16,0 2.48 35.7
T2 41,7 1.64 13,7 2.12 45.0
B 41,7 1.64 13,7 2.12 45.0
66 T2 66,5 2.61 51,7 2.04 34,5 5.35 21,0 3.26 39.1
B 51,7 2.04 21,0 3.26 39.1
76 T2 76,5 3.0 61,7 2.43 45,7 7.09 29,9 4.84 34.6
T6 57,0 2.24 25,5 3.95 44.2
T6S 47,7 1.88 17,9 2.78 60.8
B 61,7 2.43 29,9 4.64 34.6
86 T2 86,6 3.4 71,7 2.82 58,5 9.07 40,4 6.26 30.9
T6 67,0 2.64 35,3 5.47 39.7
T6S 57,7 2.27 26,1 4.05 55.4
B 71,7 2.82 40,4 6.26 30.9
101 T2 101,5 3.99 83,7 3.3 80,6 12.5 55,0 8.53 31.8
T6 79,0 3.11 49,0 7.6 39.2
T6S 71,7 2.82 40,4 6.26 49.9
B 86,7 3.41 59,0 9.15 26.8
116 T6 116,5 4.58 93,0 3.66 106,2 16.47 67,9 10.53 36.1
T6S 85,7 3.37 57,7 8.95 45.7
B 101,7 4.0 81,2 12.59 23.5
131 T6 131,5 5.17 108,0 4.25 135,4 20.99 91,6 14.2 32.3
T6S 100,7 3.96 79,6 12.34 41.2
B 116,7 4.56 107,0 16.59 21.0
146 T6 146,5 5.76 123,0 4.84 168,1 26.06 118,8 18.42 29.3
T6S 115,7 4.56 105,1 16.29 37.5
B 131,7 5.19 136,2 21.12 19.0
16
CBT DMY 146 T6S 20/25 S FD
Bit profiles
Flush alternativesn CF (channel flush) n CFF (CF to be filed) n ECF (extended channel flush) n FD (face discharge flush) n JET few narrow water ways combined with outer- and inner diameter slots.
Semi-round profileProfile for high penetration rate. Lower carat weight than other profiles. Standard profile for surface set thin kerf drill bits.
Multi step profileAllows higher penetration rates than round profile. Fragile in fractured formation, i.e. surface set wireline bits.
Two wide steps with face discharge profileFor use in soft formation with face discharge, surface set T6S, S Geobor and triple tube NK3, HK3, PG3.
W profileStandard profile for most impregnated bits.
Sawtooth profile (side view)Sawtooth profile is used only in tripax bits.
Flat profileProfile for some impregnated bits.
Concave profileProfile only for non-coring bits.
Remarks:Core bits with face discharge, are used in loose formations, where the flushing medium may destroy the core e.g. Face discharge recommended only for T6S, S GEOBOR and Tri-ple tube core barrels.
17
CODE KEY SEGMENT CODE EXPLANATION
PRODUCT
CBT Core Bit
NCB Non Coring Bit
CAS Casing Shoe Bit
RES Reaming Shell
ROS Rod Shoe Bit
TYPE
Diamond bit rangeDBT Impregnated
DMY Surface set
PDC bit rangeDPX Diapax
TRX Tripax
TC bit rangeTCI TC insert
CRB Corborit
STANDARD DIAMOND SURFACE SET BITS
Diamond grade S Special quality
Diamond size SPC Stones per carat
FLUSH ALTERNATIVES
Standard
CF Channel flush
ECF Expanded channel flush
FD Face discharge
Optional (on request)R Reinforced ID
RR Reinforced ID and OD
AdditionalINS Inserts (indicate no. of inserts DPX, TRX etc.)
PRF Profile (indicate bit profile)
Codes
CBT DMY 146 T6S 20/25 S FD
Diamond gradeTypeProduct
Dimension
Core barrel design
Diamondsize
Flush alternative
Code structuresIn the code structure we describe the product features in accordance with key below. With this key you will be able identify the product.
Core bit, Impregnated, 46TT, Matrix Application SC10, Standard high /3, Channel flushing CFF.
Short: CBT DBT 46TT SC10/3 CFF
Core bit, Surface set, 146T6S,20/25SPC, Quality S, Face discharge FD.
Short: CBT DMY 146T6S 20/25 S FD
CBT DBT 46 TT SC10 /3 CFF
TypeProduct
Dimension
Core barrel design
Application
Matrix height
Flush alternative
=
=
18 Products in bold are stock items, other items are produced to order.
Impregnated (DBT) bits 46TTSize Design Rock formation Rock Group / Height Waterways Product No.
46 TT Extremely hard, Non abrasive SC10/3 8CFF 3702 6712 00
46 TT Hard-Very hard, Slightly abrasive SC8-9/3 6CFF 3702 6903 00
46 TT Hard-Very hard, Polishing KS(S++)/3 8CFF 8370 2300 18
46 TT Medium hard-hard, Polishing+mixed KX/3 8CFF 8370 2300 00
46 TT Medium hard-hard, Polishing KM/3 6CFF 8370 0711 39
46 TT Medium hard-hard, Polishing HM/3 6CFF 8370 0770 40
46 TT Medium hard-hard, Abrasive+mixed SC6-8/3 8CFF 3702 6863 00
46 TT Medium soft-hard, Abrasive, Fractured SC5-6/3 6CFF 8370 0760 40
46 TT Soft-medium soft, Abrasive, Highly fractured SC4-5/2 6CFF 3702 7213 00
46 TT Extremely abrasive, Highly fractured SC2/3 6CFF 3702 7202 00
Reaming shells (RES) 46TTSize Design Type Product No.
46 TT Surface set rib type 8370 1754 30
46 TT SC STD 3702 7125 00
48TT (LTK48)Impregnated (DBT) bits 48TT (LTK48)
Size Design Rock formation Rock Group/Height Waterways Product No.
48(A) TT Extremely hard, Non abrasive SC10/3 8CF 3702 6694 00
48(A) TT Hard-Very hard, Slightly abrasive SC8-9/3 8CF 3702 7242 00
48(A) TT Hard-Very hard, Polishing KS(S++)/3 8CFF 3702 6222 00
48(A) TT Hard-Very hard, Polishing KS(S++)/3 8CF 8370 2300 19
48(A) TT Medium hard-hard, Polishing+mixed KX/3 8CFF 3702 6220 00
48(A) TT Medium hard-hard, Abrasive+mixed SC6-8/3 6CF 3702 6870 00
48(A) TT Medium soft-hard, Abrasive, Fractured SC5-6/3 6CF 8370 0780 45
48(A) TT Soft-medium soft, Abrasive, Highly fractured SC4-5/3 6CF 3702 6232 00
Reaming shells (RES) 48TT (LTK48)Size Design Type Product No.
48(A) TT Surface set rib type 8370 1749 75
48(A) TT SC STD 3702 7126 00
Bits for conventional core barrels46TT
19
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
56TTImpregnated (DBT) bits 56TT
Size Design Rock formation Rock Group/Height Waterways Product No.
56 TT Extremely hard, Non abrasive SC10/3 10CFF 3702 6869 00
56 TT Very hard-Extremely hard, Slightly abrasive SC9-10/3 10CFF 3702 6498 00
56 TT Hard-Very hard, Slightly abrasive SC8-9/3 8CFF 3702 6904 00
56 TT Hard-Very hard, Polishing KS(S++)/3 10CFF 8370 2300 20
56 TT Medium hard-hard, Polishing+mixed KX/3 10CFF 8370 2300 02
56 TT Medium hard-hard, Polishing KM/3 8CFF 8370 0711 47
56 TT Medium hard-hard, Polishing HM/3 8CFF 8370 0770 50
56 TT Medium hard-hard, Abrasive+mixed SC6-8/3 8CFF 3702 6864 00
56 TT Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8CFF 3702 6800 00
56 TT Extremely abrasive, Highly fractured SC2/3 8CFF 3702 6888 00
Reaming shells (RES) 56TTSize Design Type Product No.
56 TT Surface set rib type 8370 1754 40
56 TT SC STD 3702 7127 00
46T2Impregnated (DBT) bits 46T2
Size Design Rock formation Rock Group/Height Waterways Product No.
46 T2 Extremely hard, Non abrasive SC10/3 8ECF 3702 6725 00
46 T2 Hard-Very hard, Slightly abrasive SC8-9/3 6CF 3702 6905 00
46 T2 Hard-Very hard, Polishing KS(S++)/3 8CF 8370 2300 21
46 T2 Medium hard-hard, Abrasive+mixed SC6-8/3 6CF 3702 6879 00
46 T2 Medium soft-hard, Abrasive, Fractured SC5-6/3 6CF 8370 0643 60
46 T2 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 6CF 3702 5997 00
46 T2 Extremely abrasive, Highly fractured SC2/3 6CF 3702 7201 00
Reaming shells (RES) 46T2Size Design Type Product No.
46 T2 SC STD 3702 7128 00
20
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
56T2Impregnated (DBT) bits 56T2
Size Design Rock formation Rock Group/Height Waterways Product No.
56 T2 Extremely hard, Non abrasive SC10/3 10ECF 3702 6705 00
56 T2 Very hard-Extremely hard, Slightly abrasive SC9-10/3 10ECF 3702 6472 00
56 T2 Hard-Very hard, Slightly abrasive SC8-9/3 8CF 3702 6906 00
56 T2 Hard-Very hard, Polishing KS(S++)/3 10CF 8370 2300 22
56 T2 Medium hard-hard, Polishing+mixed KX/3 10ECF 8370 2300 04
56 T2 Medium hard-hard, Abrasive+mixed SC6-8/3 8CF 3702 6826 00
56 T2 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8CF 3702 6801 00
56 T2 Extremely abrasive, Highly fractured SC2/3 8CF 3702 7203 00
Surface set (DMY) bits 56T2Size Design Rock formation Diamond size/Quality Waterways Product No.
56 T2 Soft-Medium hard 30/50 S CF 8370 0680 02
Reaming shells (RES) 56T2Size Design Type Product No.
56 T2 SC STD 3702 7129 00
66T2Impregnated (DBT) bits 66T2
Size Design Rock formation Rock Group/Height Waterways Product No.
66 T2 Extremely hard, Non abrasive SC10/3 12CF 3702 7192 00
66 T2 Hard-Very hard, Slightly abrasive SC8-9/3 8CF 3702 7020 00
66 T2 Medium hard-hard, Abrasive+mixed SC6-8/3 8CF 3702 7019 00
66 T2 Medium soft-hard, Abrasive, Fractured SC5-6/3 8CF 3702 7198 00
66 T2 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8CF 3702 7018 00
66 T2 Extremely abrasive, Highly fractured SC2/3 8CF 3702 7017 00
Surface set (DMY) bits 66T2Size Design Rock formation Diamond size/Quality Waterways Product No.
66 T2 Soft-Medium hard 30/50 S CF 8370 0680 85
Reaming shells (RES) 66T2Size Design Type Product No.
66 T2 SC STD 3702 7130 00
21
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
76T2Impregnated (DBT) bits 76T2
Size Design Rock formation Rock Group/Height Waterways Product No.
76 T2 Extremely hard, Non abrasive SC10/3 12ECF 3702 6715 00
76 T2 Hard-Very hard, Slightly abrasive SC8-9/3 10CF 3702 6907 00
76 T2 Medium hard-hard, Abrasive+mixed SC6-8/3 10CF 3702 6900 00
76 T2 Medium soft-hard, Abrasive, Fractured SC5-6/3 10CF 3702 7197 00
76 T2 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 12CF 3702 6772 00
76 T2 Extremely abrasive, Highly fractured SC2/3 12CF 8370 0620 39
Surface set (DMY) bits 76T2Size Design Rock formation Diamond size/Quality Waterways Product No.
76 T2 Soft-Medium hard 30/50 S CF 8370 0680 93
Tungsten carbide bits 76T2Size Design Rock formation Type Waterways Product No.
76 T2 Soft Corborit CF 8372 0123 05
Reaming shells (RES) 76T2Size Design Type Product No.
76 T2 SC STD 3702 7131 00
86T2Impregnated (DBT) bits 86T2
Size Design Rock formation Rock Group/Height Waterways Product No.
86 T2 Extremely hard, Non abrasive SC10/2 14ECF 3702 6698 00
86 T2 Hard-Very hard, Slightly abrasive SC8-9/2 12CF 3702 7072 00
86 T2 Medium hard-hard, Abrasive+mixed SC6-8/2 12CF 3702 7093 00
86 T2 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 12CF 3702 6774 00
86 T2 Extremely abrasive, Highly fractured SC2/2 12CF 8370 0620 47
Surface set (DMY) bits 86T2Size Design Rock formation Diamond size/Quality Waterways Product No.
86 T2 Soft-Medium hard 30/50 S CF 8370 0681 01
Tungsten carbide bits 86T2Size Design Rock formation Type Waterways Product No.
86 T2 Soft Corborit CF 8372 0124 04
Reaming shells (RES) 86T2Size Design Type Product No.
86 T2 SC STD 3702 7132 00
22
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
101T2Impregnated (DBT) bits 101T2
Size Design Rock formation Rock Group/Height Waterways Product No.
101 T2 Extremely hard, Non abrasive SC10/2 15ECF 3702 6827 00
101 T2 Hard-Very hard, Slightly abrasive SC8-9/2 14CF 3702 7073 00
101 T2 Medium hard-hard, Abrasive+mixed SC6-8/2 14CF 3702 7092 00
101 T2 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 14CF 3702 6776 00
101 T2 Extremely abrasive, Highly fractured SC2/2 14CF 8370 0620 54
Surface set (DMY) bits 101T2Size Design Rock formation Diamond size/Quality Waterways Product No.
101 T2 Soft-Medium hard 30/50 S CF 8370 0681 19
Tungsten carbide bits 101T2Size Design Rock formation Type Waterways Product No.
101 T2 Soft Corborit CF 8372 0125 03
Reaming shells (RES) 101T2Size Design Type Product No.
101 T2 SC STD 3702 7133 00
TNWImpregnated (DBT) bits TNW
Size Design Rock formation Rock Group/Height Waterways Product No.
N T-W Extremely hard, Non abrasive SC10/3 12ECF 3702 7021 00
N T-W Hard-Very hard, Slightly abrasive SC8-9/3 10CF 3702 7063 00
N T-W Medium hard-hard, Polishing HM/2 10CF 8370 1111 82
N T-W Medium hard-hard, Abrasive+mixed SC6-8/3 10CF 3702 7033 00
Reaming shells (RES) TNWSize Design Type Product No.
N T-W SC STD
N T-W Surface set rib type 8370 1755 40
46BImpregnated (DBT) bits 46B
Size Design Rock formation Rock Group/Height Waterways Product No.
46 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 6CF 3702 7224 00
Tungsten carbide bits 46BSize Design Rock formation Type Waterways Product No.
46 B Soft Corborit CF 8372 0318 00
Reaming shells (RES) 46BSize Design Type Product No.
46 B Surface set Ext.type 3702 6540 00
23
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
56BImpregnated (DBT) bits 56B
Size Design Rock formation Rock Group/Height Waterways Product No.
56 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 8CF 8370 2300 40
Tungsten carbide bits 56BSize Design Rock formation Type Waterways Product No.
56 B Soft Corborit CF 8372 0319 09
Reaming shells (RES) 56BSize Design Type Product No.
56 B Surface set Ext.type 3702 6541 00
66BImpregnated (DBT) bits 66B
Size Design Rock formation Rock Group/Height Waterways Product No.
66 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 10CF 3702 6783 00
Tungsten carbide bits 66BSize Design Rock formation Type Waterways Product No.
66 B Soft Corborit CF 8372 0320 06
Reaming shells (RES) 66BSize Design Type Product No.
66 B Surface set Ext.type 3702 6542 00
76BImpregnated (DBT) bits 76B
Size Design Rock formation Rock Group/Height Waterways Product No.
76 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 10CF 3702 6771 00
76 B Medium hard-hard, Abrasive+mixed SC6-8/3 10CF 3702 6986 00
Tungsten carbide bits 76BSize Design Rock formation Type Waterways Product No.
76 B Soft Corborit CF 8372 0321 05
Reaming shells (RES) 76BSize Design Type Product No.
76 B Surface set Ext.type 3702 6543 00
24
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
86BImpregnated (DBT) bits 86B
Size Design Rock formation Rock Group/Height Waterways Product No.
86 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 12CF 3702 6773 00
Tungsten carbide bits 86BSize Design Rock formation Type Waterways Product No.
86 B Soft Corborit CF 8372 0322 04
Reaming shells (RES) 86BSize Design Type Product No.
86 B Surface set Ext.type 3702 6544 00
101BImpregnated (DBT) bits 101B
Size Design Rock formation Rock Group/Height Waterways Product No.
101 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 14CF 3702 6775 00
Tungsten carbide bits 101BSize Design Rock formation Type Waterways Product No.
101 B Soft Corborit CF 8372 0323 03
Reaming shells (RES) 101BSize Design Type Product No.
101 B Surface set Ext.type 3702 6545 00
116BImpregnated (DBT) bits 116B
Size Design Rock formation Rock Group/Height Waterways Product No.
116 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 16CF 3702 7225 00
Tungsten carbide bits 116BSize Design Rock formation Type Waterways Product No.
116 B Soft Corborit CF 8372 0324 02
Reaming shells (RES) 116BSize Design Type Product No.
116 B Surface set Ext.type 3702 6744 00
25
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
131BImpregnated (DBT) bits 131B
Size Design Rock formation Rock Group/Height Waterways Product No.
131 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 16CF 3702 7226 00
Tungsten carbide bits 131BSize Design Rock formation Type Waterways Product No.
131 B Soft Corborit CF 8372 0325 01
Reaming shells (RES) 131BSize Design Type Product No.
131 B Surface set Ext. type 3702 6821 00
146BImpregnated (DBT) bits 146B
Size Design Rock formation Rock Group/Height Waterways Product No.
146 B Soft-medium soft, Abrasive, Highly fractured SC4-5/2 18CF 3702 7227 00
Tungsten carbide bits 146BSize Design Rock formation Type Waterways Product No.
146 B Soft Corborit CF 8372 0326 00
Reaming shells (RES) 146BSize Design Type Product No.
146 B Surface set Ext. type 3702 6817 00
76T6Impregnated (DBT) bits 76T6
Size Design Rock formation Rock Group/Height Waterways Product No.
76 T6 Medium hard-hard, Abrasive+mixed SC6-8/2 8CF 3702 7228 00
76 T6 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 8ECF 3702 7229 00
Surface set (DMY) bits 76T6Size Design Rock formation Diamond size/Quality Waterways Product No.
76 T6 Soft-Medium hard 30/50 S CF 8370 0686 14
Tungsten carbide bits 76T6Size Design Rock formation Type Waterways Product No.
76 T6 Soft Corborit CF 8372 0133 11
Reaming shells (RES) 76T6Size Design Type Product No.
76 T6 Surface set rib type 8370 2300 62
26
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
86T6Impregnated (DBT) bits 86T6
Size Design Rock formation Rock Group/Height Waterways Product No.
86 T6 Medium hard-hard, Abrasive+mixed SC6-8/2 9CF 3702 7230 00
86 T6 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 9ECF 3702 7231 00
Surface set (DMY) bits 86T6Size Design Rock formation Rock Group/Height Waterways Product No.
86 T6 Soft-Medium hard 30/50 S CF 8370 0686 22
Tungsten carbide bits 86T6Size Design Rock formation Rock Group/Height Waterways Product No.
86 T6 Soft Corborit CF 8372 0134 10
Reaming shells (RES) 86T6Size Design Rock formation Rock Group/Height Waterways Product No.
86 T6 Surface set rib type 8370 2300 63
101T6Impregnated (DBT) bits 101T6
Size Design Rock formation Rock Group/Height Waterways Product No.
101 T6 Medium hard-hard, Abrasive+mixed SC6-8/2 10CF 3702 7191 00
101 T6 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 10ECF 3702 6652 00
Surface set (DMY) bits 101T6Size Design Rock formation Rock Group/Height Waterways Product No.
101 T6 Soft-Medium hard 30/50 S CF 8370 0686 30
Tungsten carbide bits 101T6Size Design Rock formation Rock Group/Height Waterways Product No.
101 T6 Soft Corborit CF 8372 0135 19
Reaming shells (RES) 101T6Size Design Rock formation Rock Group/Height Waterways Product No.
101 T6 Surface set rib type 8370 2300 64
27
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
116T6Impregnated (DBT) bits 116T6
Size Design Rock formation Rock Group/Height Waterways Product No.
116 T6 Hard-Very hard, Slightly abrasive SC8-9/2 11CF 3702 6913 00
116 T6 Medium hard-hard, Abrasive+mixed SC6-8/2 11CF 3702 7219 00
116 T6 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 11CF 3702 7232 00
Surface set (DMY) bits 116T6Size Design Rock formation Diamond size/Quality Waterways Product No.
116 T6 Soft-Medium hard 30/50 S CF 8370 0686 48
Tungsten carbide bits 116T6Size Design Rock formation Type Waterways Product No.
116 T6 Soft Corborit CF 8372 0136 18
Reaming shells (RES) 116T6Size Design Type Product No.
116 T6 Surface set rib type 8370 2300 65
131T6Impregnated (DBT) bits 131T6
Size Design Rock formation Rock Group/Height Waterways Product No.
131 T6 Medium hard-hard, Abrasive+mixed SC6-8/2 12CF 3702 7221 00
131 T6 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 12CF 3702 7233 00
Surface set (DMY) bits 131T6Size Design Rock formation Diamond size/Quality Waterways Product No.
131 T6 Soft-Medium hard 20/25 S CF 8370 0663 86
Tungsten carbide bits 131T6Size Design Rock formation Type Waterways Product No.
131 T6 Soft Corborit CF 8372 0137 17
Reaming shells (RES) 131T6Size Design Rock formation Type Waterways Product No.
131 T6 Surface set rib type 8370 2300 66
28
Bits for conventional core barrels
Products in bold are stock items, other items are produced to order.
146T6Impregnated (DBT) bits 146T6
Size Design Rock formation Type Waterways Product No.
146 T6 Medium Hard-Very Hard Slightly abrasive SC7-9/2 13CF 3702 7223 00
146 T6 Medium hard-hard, Abrasive+mixed SC6-8/2 13CF 3702 7234 00
146 T6 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 13CF 3702 6692 00
Surface set (DMY) bits 146T6Size Design Rock formation Type Waterways Product No.
146 T6 Soft-Medium hard 30/50 S CF 8370 0663 94
Tungsten carbide bits 146T6Size Design Rock formation Type Waterways Product No.
146 T6 Soft Corborit CF 8372 0138 16
Reaming shells (RES) 146T6Size Design Type Product No.
146 T6 Surface set rib type 8370 2300 67
101T6SSurface set (DMY) bits 101T6S
Size Design Rock formation Diamond size/Quality Waterways Product No.
101 T6S Soft-Medium hard 20/25 S FD 8370 0907 17
Tungsten carbide bits 101T6SSize Design Rock formation Type Waterways Product No.
101 T6S Soft Corborit FD 8372 0228 09
131T6SSurface set (DMY) bits 131T6S
Size Design Rock formation Diamond size/Quality Waterways Product No.
131 T6S Soft-Medium hard 20/25S FD 8370 0907 33
29Products in bold are stock items, other items are produced to order.
AOTW(AGM)Impregnated (DBT) bits AOTW(AGM)
Size Design Rock formation Rock Group/Height Waterways Product No.
A TW(GM) Extremely hard, Non abrasive SC10/4 8ECF 3702 6902 00
A TW(GM) Extremely hard, Non abrasive SC10/5 JET 4CF 3702 7209 00
A TW(GM) Hard-Very hard, Slightly abrasive SC8-9/4 8CF 3702 6921 00
A TW(GM) Medium Hard-Very Hard Slightly abrasive SC7-9/4 8CF 3702 7235 00
A TW(GM) Medium Hard-Very Hard Slightly abrasive SC7-9/5 JET 4CF 3702 7208 00
A TW(GM) Medium hard-hard, Abrasive+mixed SC6-8/4 8CF 3702 6901 00
A TW(GM) Medium hard-hard, Abrasive+mixed SC6-8/5 JET 4CF 3702 7250 00
A TW(GM) Medium soft-hard, Abrasive, Fractured SC5-6/3 8ECF 3702 7171 00
A TW(GM) Medium soft-hard, Abrasive, Fractured SC5-6/5 JET 4CF 3702 7251 00
A TW(GM) Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8ECF 3702 7172 00
A TW(GM) Soft-medium soft, Abrasive, Highly fractured SC4-5/5 JET 4CF 3702 7250 00
Reaming shells (RES) AOTW(AGM)Size Design Type Product No.
A TW(GM) SC FH 3702 7210 00
A TW(GM) Surface set rib type 8370 1755 70
BOTW(BGM)Impregnated (DBT) bits BOTW(BGM)
Size Design Rock formation Rock Group/Height Waterways Product No.
B TW(GM) Extremely hard, Non abrasive SC10/4 10ECF 3702 6741 00
B TW(GM) Extremely hard, Slightly abrasive SC10/5 JET 6CF 3702 7104 00
B TW(GM) Very hard-Extremely hard, Slightly abrasive SC9-10/4 10ECF 3702 6674 00
B TW(GM) Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6387 00
B TW(GM) Hard-Very hard, Slightly abrasive SC8-9/5 JET 6CF 3702 7004 00
B TW(GM) Hard-Very hard, Polishing KS(S++)/4 10CF 8370 2300 28
B TW(GM) Medium Hard-Very Hard Slightly abrasive SC7-9/4 10CF 3702 7065 00
B TW(GM) Medium Hard-Very Hard moderately abrasive SC7-9/5 JET 6CF 3702 7082 00
B TW(GM) Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6825 00
B TW(GM) Medium soft-hard, Abrasive, Fractured SC5-6/3 10CF 8370 2115 80
B TW(GM) Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8ECF 3702 7236 00
B TW(GM) Extremely abrasive, Highly fractured SC2/3 10CF 3702 6418 00
Surface set (DMY) bits BOTW(BGM)Size Design Rock formation Diamond size/Quality Waterways Product No.
B TW(GM) Soft-Medium hard 30/50 S CF 8370 2105 40
Reaming shells (RES) BOTW(BGM)Size Design Type Product No.
B TW(GM) SC STD 3702 7134 00
B TW(GM) *) need inner tube adjustment 10" SC STD *) 3702 7135 00
B TW(GM) Surface set rib type 8370 1755 80
Bits for wireline core barrels
30 Products in bold are stock items, other items are produced to order.
NTW(NGM)Impregnated (DBT) bits NTW(NGM)
Size Design Rock formation Rock Group/Height Waterways Product No.
N TW(GM) Extremely hard, Non abrasive SC10/4 12ECF 3702 6711 00
N TW(GM) Very hard-Extremely hard, Slightly abrasive SC9-10/3 12ECF 3702 6608 00
N TW(GM) Medium hard-hard, Polishing+mixed KX/3 12ECF 8370 2300 11
N TW(GM) Medium soft, Abrasive, Fractured SC5-6/3 12CF 8370 2115 90
Reaming shells (RES) NTW(NGM)Size Design Type Product No.
N TW(GM) Surface set rib type 8370 1755 90
AQImpregnated (DBT) bits AQ
Size Design Rock formation Rock Group/Height Waterways Product No.
A Q Extremely hard, Non abrasive SC10/4 8ECF 3702 6980 00
A Q Hard-Very hard, Polishing KS(S++)/4 8ECF 3702 6521 00
A Q Medium hard-hard, Abrasive+mixed SC6-8/4 8ECF 3702 7060 00
Reaming shells (RES) AQSize Design Type Product No.
A Q Surface set rib type 3702 6169 00
AQTKImpregnated (DBT) bits AQTK
Size Design Rock formation Rock Group/Height Waterways Product No.
A QTK Extremely hard, Non abrasive SC10/4 8ECF 3702 6726 00
A QTK Hard-Very hard, Polishing KS(S++)/4 8CF 3702 5840 00
A QTK Medium hard-hard, Polishing+mixed KX/3 8ECF 3702 6348 00
Reaming shells (RES) AQTKSize Design Type Product No.
A QTK Surface set rib type 8370 1755 60
Bits for wireline core barrels
31
Bits for wireline core barrels
Products in bold are stock items, other items are produced to order.
BQImpregnated (DBT) bits BQ
Size Design Rock formation Rock Group/Height Waterways Product No.
B Q Extremely hard, Non abrasive SC10/4 8ECF 3702 6713 00
B Q Extremely hard, Slightly abrasive SC10/5 JET 6CF 3702 7080 00
B Q Very hard-Extremely hard, Slightly abrasive SC9-10/3 8ECF 3702 6502 00
B Q Very hard, Slightly abrasive,Very competent SC9/5 JET 6CF 3702 7091 00
B Q Hard-Very hard, Slightly abrasive SC8-9/5 JET 6CF 3702 7105 00
B Q Hard-Very hard, Slightly abrasive SC8-9/4 8CF 3702 6351 00
B Q Hard-Very hard, Polishing KS(S++)/3 8CF 8370 2300 30
B Q Medium Hard-Very Hard Slightly abrasive SC7-9/4 8CF 3702 7075 00
B Q Medium Hard-Very Hard moderately abrasive SC7-9/5 JET 6CF 3702 7119 00
B Q Medium hard-hard, Polishing+mixed KX/4 8ECF 3702 6562 00
B Q Medium hard-hard, Abrasive+mixed SC6-8/4 8ECF 3702 7006 00
B Q Medium hard-hard, Abrasive+mixed SC6-8/4 8CF 3702 6824 00
B Q Medium soft-hard, Abrasive, Fractured SC5-6/3 8CF 8370 2036 80
B Q Soft-medium soft, Abrasive, Highly fractured SC4-5/3 6CF 3702 6792 00
B Q Extremely abrasive, Highly fractured SC2/3 6CF 3702 7205 00
Surface set (DMY) bits BQSize Design Rock formation Diamond size/Quality Waterways Product No.
B Q Soft-Medium hard 20/25S CF 8370 2001 42
Reaming shells (RES) BQSize Design Rock formation Type Waterways Product No.
B Q SC FH 3702 6847 00
B Q *) need inner tube adjustment 10" SC STD *) 3702 7136 00
BQTKImpregnated (DBT) bits BQTK
Size Design Rock formation Rock Group/Height Waterways Product No.
B QTK Extremely hard, Non abrasive SC10/4 8ECF 3702 6765 00
B QTK Extremely hard, Non abrasive SC10/5 JET 6CF 3702 7121 00
B OTK Very hard, Slightly abrasive,Very competent SC9/5 JET 6CF 3702 7120 00
B QTK Hard-Very hard, Polishing KS(S++)/4 8ECF 3702 6290 00
B QTK Medium hard-hard, Abrasive+mixed SC6-8/4 8ECF 3702 7007 00
Medium soft-hard, Abrasive, Fractured SC5-6/4 8CF 3702 6289 00
Reaming shells (RES) BQTKSize Design Rock formation Type Waterways Product No.
B QTK Surface set rib type 3702 6367 00
32
Bits for wireline core barrels
Products in bold are stock items, other items are produced to order.
NQImpregnated (DBT) bits NQ
Size Design Rock formation Rock Group/Height Waterways Product No.
N Q Extremely hard, Non abrasive SC10/4 10ECF 3702 6714 00
N Q Extremely hard, Slightly abrasive SC10/5 JET 8CF 3702 7089 00
N Q Very hard-Extremely hard, Slightly abrasive SC9-10/3 10ECF 3702 6503 00
N Q Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6388 00
N Q Hard-Very hard, Slightly abrasive SC8-9/5 JET 8CF 3702 7106 00
N Q Hard-Very hard, Polishing KS(S++)/4 10CF 8370 2300 25
N Q Hard-Very hard, Polishing KS(S++)/5 10CF 3702 6789 00
N Q Medium Hard-Very Hard Slightly abrasive SC7-9/4 10CF 3702 7083 00
N Q Medium Hard-Very Hard moderately abrasive SC7-9/5 JET 8CF 3702 7102 00
N Q Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6839 00
N Q Medium soft-hard, Abrasive, Fractured SC5-6/3 10CF 8370 2082 20
N Q Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8CF 3702 6182 00
N Q Extremely abrasive, Highly fractured SC2/3 10CF 3702 7206 00
Surface set (DMY) bits NQSize Design Rock formation Diamond size/Quality Waterways Product No.
N Q Soft-Medium hard 20/25 S CF 8370 2003 73
Tungsten carbide bits NQSize Design Rock formation Type Waterways Product No.
N Q Soft Corborit CF 8372 0922 08
Reaming shells (RES) NQSize Design Rock formation Type Waterways Product No.
N Q SCFH 3702 6849 00
N Q *) need inner tube adjustment 10" SC STD *) 3702 7137 00
33Products in bold are stock items, other items are produced to order.
NQ2Impregnated (DBT) bits NQ2
Size Design Rock formation Rock Group/Height Waterways Product No.
N Q2 Extremely hard, Non abrasive SC10/4 8ECF 3702 6747 00
N Q2 Extremely hard, Slightly abrasive SC10/5 JET 8CF 3702 7088 00
N Q2 Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6592 00
N Q2 Hard-Very hard, Slightly abrasive SC8-9/5 JET 8CF 3702 7107 00
N Q2 Hard-Very hard, Polishing KS(S++)/4 8ECF 3702 6414 00
N Q2 Hard-Very hard, Polishing KS(S++)/3 8ECF 3702 6467 00
N Q2 Hard-Very hard, Polishing KS(S++)/3 8CF 8370 2300 37
N Q2 Medium Hard-Very Hard Slightly abrasive SC7-9/4 10CF 3702 7086 00
N Q2 Medium Hard-Very Hard Slightly abrasive SC7-9/5JET 8CF 3702 7247 00
N Q2 Medium hard-hard, Polishing+mixed KX/3 8ECF 3702 6219 00
N Q2 Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6923 00
N Q2 Medium hard-hard, Abrasive+mixed SC6-8/5 JET 8CF 3702 7158 00
N Q2 Medium soft-hard, Abrasive, Fractured SC5-6/3 8CF 3702 5806 00
N Q2 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 8CF 3702 6032 00
Tungsten carbide bits NQ2Size Design Rock formation Type Waterways Product No.
N Q2 Soft Corborit CF 3702 7200 00
Reaming shells (RES) NQ2Size Design Type Product No.
N Q2 SC FH 3702 6849 00
N Q2 *) need inner tube adjustment 10" SC STD *) 3702 7137 00
N3/50Impregnated (DBT) bits N3/50
Size Design Rock formation Rock Group/Height Waterways Product No.
N 3/50 Extremely hard, Non abrasive SC10/4 SCAL 3702 6727 00
N 3/50 Extremely hard, Non abrasive SC10/5 JET 8CF 3702 7062 00
N 3/50 Very hard-Extremely hard, Slightly abrasive SC9-10/4 SCAL 3702 6972 00
N 3/50 Hard-Very hard, Slightly abrasive SC8-9/4 SCAL 3702 6969 00
N 3/50 Medium hard-hard, Abrasive+mixed SC6-8/3 10FD 3702 7047 00
N 3/50 Medium soft-hard, Abrasive, Fractured SC5-6/3 10FD 3702 7046 00
Size Design Type Product No.
N 3/50 SC FH 3702 6849 00
Bits for wireline core barrels
34 Products in bold are stock items, other items are produced to order.
NQ3Impregnated (DBT) bits NQ3
Size Design Rock formation Rock Group/Height Waterways Product No.
N Q3 Extremely hard, Non abrasive SC10/3 10CF 3702 6611 00
Extremely hard, Non abrasive SC10/3 10FD 3702 6607 00
N Q3 Extremely hard, Non abrasive SC10/5 JET 8CF 3702 7109 00
N Q3 Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6593 00
Hard-Very hard, Polishing KS(S++)/3 10FD 3702 6364 00
Hard-Very hard, Polishing KS(S++)/3 SCAL 3702 6629 00
N Q3 Medium Hard-Very Hard Slightly abrasive SC7-9/4 10CF 3702 7087 00
N Q3 Medium hard-hard, Abrasive+mixed SC6-8/3 10CF 3702 7049 00
N Q3 Medium soft-hard, Abrasive, Fractured SC5-6/3 10FD 3702 6084 00
N Q3 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 10FD 3702 7050 00
N Q3 Extremely abrasive, Highly fractured SC2/3 10FD 3702 7184 00
Surface set (DMY) bits NQ3Size Design Rock formation Diamond size/Quality Waterways Product No.
N Q3 Soft-Medium hard 20/25 S FD 3702 6086 00
Tungsten carbide bits NQ3Size Design Rock formation Type Waterways Product No.
N Q3 Soft Corborit FD 8372 0935 03
Reaming shells (RES) NQ3Size Design Type Product No.
N Q3 SC FH 3702 6849 00
N Q3 *) need inner tube adjustment 10" SC STD *) 3702 7137 00
Bits for wireline core barrels
35Products in bold are stock items, other items are produced to order.
HQImpregnated (DBT) bits HQ
Size Design Rock formation Rock Group/Height Waterways Product No.
H Q Extremely hard, Non abrasive SC10/4 12ECF 3702 6866 00
H Q Extremely hard, Non abrasive SC10/5 JET 10CF 3702 7090 00
H Q Extremely hard, Non abrasive SC10/3 12ECF 3702 6723 00
H Q Very hard-Extremely hard, Slightly abrasive SC9-10/3 12ECF 3702 6504 00
H Q Hard-Very hard, Slightly abrasive SC8-9/4 12CF 3702 6404 00
H Q Hard-Very hard, Slightly abrasive SC8-9/5 JET 10CF 3702 7108 00
H Q Medium Hard-Very Hard Slightly abrasive SC7-9/4 12CF 3702 7085 00
H Q Medium Hard-Very Hard Slightly abrasive SC7-9/5 JET 10CF 3702 7243 00
H Q Medium hard-hard, Abrasive+mixed SC6-8/4 12CF 3702 6873 00
H Q Medium soft-hard, Abrasive, Fractured SC5-6/3 12CF 8370 2081 70
H Q Soft-medium soft, Abrasive, Highly fractured SC4-5/3 10CF 3702 5981 00
H Q Extremely abrasive, Highly fractured SC2/3 10CF 3702 7217 00
Surface set (DMY) bits HQSize Design Rock formation Diamond size/Quality Waterways Product No.
H Q Soft-Medium hard 20/25 S CF 8370 2003 81
Tungsten carbide bits HQSize Design Rock formation Type Waterways Product No.
H Q Soft Corborit CF 8372 0923 07
Reaming shells (RES) HQSize Design Type Product No.
H Q SC FH 3702 6851 00
H Q 10" SC STD 3702 7138 00
Bits for wireline core barrels
36 Products in bold are stock items, other items are produced to order.
HQ3Impregnated (DBT) bits HQ3
Size Design Rock formation Rock Group/Height Waterways Product No.
H Q3 Extremely hard, Non abrasive SC10/3 12ECF 3702 6737 00
H Q3 Extremely hard, Non abrasive SC10/3 7FD 3702 6597 00
H Q3 Hard-Very hard, Slightly abrasive SC8-9/3 7CF 3702 6613 00
H Q3 Hard-Very hard, Slightly abrasive SC8-9/4 7CF 3702 6965 00
H Q3 Medium hard-hard, Polishing+mixed KX/3 7FD 3702 6253 00
H Q3 Medium Hard-Very Hard moderately abrasive SC7-9/4 7CF 3702 7103 00
H Q3 Medium hard-hard, Abrasive+mixed SC6-8/4 12ECF 3702 6966 00
H Q3 Medium hard-hard, Abrasive+mixed SC6-8/3 CF 3702 6812 00
H Q3 Medium hard-hard, Abrasive+mixed SC6-8/3 7FD 3702 6989 00
H Q3 Medium soft, Abrasive, Fractured SC5-6/3 7FD 3702 6259 00
H Q3 Medium soft-hard, Abrasive, Fractured SC5-6/3 7CF 3702 6804 00
H Q3 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 7FD 3702 6947 00
H Q3 Extremely abrasive, Highly fractured SC2/3 7FD 3702 7218 00
Surface set (DMY) bits HQ3Size Design Rock formation Diamond size/Quality Waterways Product No.
H Q3 Soft-Medium hard 20/25 S FD 3702 6089 00
Tungsten carbide bits HQ3Size Design Rock formation Type Waterways Product No.
H Q3 Soft Corborit FD 3702 7157 00
Reaming shells (RES) HQ3Size Design Type Product No.
H Q3 SC FH 3702 6851 00
H Q3 *) need inner tube adjustment 10" SC STD *) 3702 7138 00
Bits for wireline core barrels
37Products in bold are stock items, other items are produced to order.
PG/PQImpregnated (DBT) bits PG/PQ
Size Design Rock formation Rock Group/Height Waterways Product No.
P G, Q Extremely hard, Non abrasive SC10/3 14ECF 3702 6475 00
P G, Q Hard-Very hard, Slightly abrasive SC8-9/3 14ECF 3702 6615 00
P G, Q Medium hard-hard, Abrasive+mixed SC6-8/3 14ECF 3702 6973 00
P G, Q Soft-medium soft, Abrasive, Highly fractured SC4-5/3 14ECF 3702 6974 00
P G, Q Extremely abrasive, Highly fractured SC2/3 14ECF 3702 7207 00
Surface set (DMY) bits PG/PQSize Design Rock formation Diamond size/Quality Waterways Product No.
P G, Q Soft-Medium hard 20/25 S CF 8370 2020 10
Tungsten carbide bits PQSize Design Rock formation Type Waterways Product No.
P G, Q Soft Corborit CF 8372 0932 06
Reaming shells (RES) PG/PQSize Design Type Product No.
P G, Q SC FH 3702 7000 00
PG3/PQ3Impregnated (DBT) bits PG3/Q3
Size Design Rock formation Rock Group/Height Waterways Product No.
P G3, Q3 Extremely hard, Non abrasive SC10/3 10CF 3702 6877 00
P G3, Q3 Very hard-Extremely hard, Slightly abrasive SC9-10/3 10CF 3702 6616 00
P G3, Q3 Hard-Very hard, Slightly abrasive SC8-9/3 10CF 3702 6617 00
P G3, Q3 Medium hard-hard, Abrasive+mixed SC6-8/3 10CF 3702 6987 00
P G3, Q3 Medium hard-hard, Abrasive+mixed SC6-8/3 10FD 3702 6988 00
P G3, Q3 Medium soft-hard, Abrasive, Fractured SC5-6/3 10FD 3702 5794 00
P G3, Q3 Soft-medium soft, Abrasive, Highly fractured SC4-5/3 10FD 3702 6946 00
Diamond surface set (DIAMY) bits PG3/Q3Size Design Rock formation Diamond size/Quality Waterways Product No.
P G3, Q3 Soft-Medium hard 20/25 S FD 3702 6100 00
Tungsten carbide bits PG3/Q3Size Design Rock formation Type Waterways Product No.
P G3, Q3 Soft Corborit FD 3702 7165 00
Reaming shells (RES) PG3/Q3Size Design Rock formation Type Waterways Product No.
P G3,Q3 SC FH 3702 7000 00
Bits for wireline core barrels
38 Products in bold are stock items, other items are produced to order.
S GeoborImpregnated (DBT) bits S Geobor
Size Design Rock formation Rock Group/Height Waterways Product No.
S Geobor 1 Hard - Very hard, Polishing KS(S++)/3 12FD 8370 2300 38
S Geobor 1 Medium hard - hard, Polishing mixed KX/2 12FD 8370 2300 12
S Geobor 1 Medium hard-hard, Abrasive+mixed SC6-8/3 12CF 3702 6978 00
S Geobor 1 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 9FD 3740 4007 61
S Geobor 1 Soft-medium soft, Abrasive, Highly fractured SC4-5/2 12SCAL 3740 4007 63
S Geobor 1 Extremely abrasive, Highly fractured SC2/2 9FD 3702 7186 00
Diamond surface set (DIAMY) bits S GeoborSize Design Rock formation Diamond size/Quality Waterways Product No.
S Geobor 1 Soft-Medium hard 20/25 S FD 3702 1901 67
Diamond Crystaline (PDC) bits S GeoborSize Design Rock formation Type Waterways Product No.
S Geobor 1 Soft Tripax 77INS CUB SAW
FD 3702 5066 00
S Geobor 1 Soft Tripax 96INS Tri. Semi R.
FD 3702 5085 00
S Geobor 1 Soft Tripax 60INS CUB Semi R.
12CF 3702 6461 00
S Geobor 1 Soft Diapax 8INS 13mm 13SCAL 3702 6391 00
Tungsten carbide bits S GeoborSize Design Method Rock formation Type Waterways Product No.
S Geobor 1 Soft TCI two step 8372 0941 10
S Geobor 1 Soft Corborit 8372 0925 05
S Geobor 2 150/102 Very soft TCI with pilot 8372 0902 10
S Geobor 3 150/110 Very soft and unconsolidated TCI with pilot 8372 0941 40
Reaming shells (RES) S GeoborSize Design Type Product No.
S Geeobor Surface set rib type 3702 5922 00
Bits for wireline core barrels
39Products in bold are stock items, other items are produced to order.
46 HagbyImpregnated (DBT) bits 46 Hagby
Size Design Rock formation Rock Group/Height Waterways Product No.
46 Hagby Extremely hard, Non abrasive SC10/4 8ECF 3702 6865 00
46 Hagby Extremely hard, Non abrasive SC10/5 JET 4CF 3702 6925 00
46 Hagby Extremely hard, Non abrasive SC10EXT/5 JET 4CF 3702 7116 00
46 Hagby Very hard-Extremely hard, Slightly abrasive SC9-10/4 8ECF 3702 6495 00
46 Hagby Hard-Very hard, Slightly abrasive SC8-9/4 8CF 3702 6908 00
46 Hagby Hard-Very hard, Polishing KS(S++)/4 8ECF 3702 6297 00
46 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 8CF 3702 6788 00
46 Hagby Medium hard-hard, Abrasive+mixed SC6-8/5 JET 4CF 3702 7177 00
Reaming shells (RES) 46 HagbySize Design Rock formation Type Waterways Product No.
46 Hagby SC FH 3702 7122 00
46 Hagby SC STD 3702 6859 00
56 HagbyImpregnated (DBT) bits 56 Hagby
Size Design Rock formation Rock Group/Height Waterways Product No.
56 Hagby Extremely hard, Non abrasive SC10/4 10ECF 3702 6716 00
56 Hagby Extremely hard, Non abrasive SC10/5 JET 4CF 3702 6899 00
56 Hagby Very hard-Extremely hard, Slightly abrasive SC9-10/4 10ECF 3702 6506 00
56 Hagby Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6937 00
56 Hagby Hard-Very hard, Polishing KS(S++)/4 10ECF 3702 6298 00
56 Hagby Medium Hard-Very Hard moderately abrasive SC7-9/4 10CF 3702 7100 00
56 Hagby Medium Hard-Very Hard moderately abrasive SC7-9/5 JET 4CF 3702 7195 00
56 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6884 00
56 Hagby Medium hard-hard, Abrasive+mixed SC6-8/5 JET 4CF 3702 7077 00
56 Hagby Medium soft-hard, Abrasive, Fractured SC5-6/4 10CF 3702 6853 00
Tungsten carbide bits 56 HagbySize Design Rock formation Type Waterways Product No.
56 Hagby Soft Corborit 3702 7166 00
Reaming shells (RES) 56 HagbySize Design Rock formation Type Waterways Product No.
56 Hagby SC STD 3702 6857 00
Bits for wireline core barrels
40 Products in bold are stock items, other items are produced to order.
Bits for wireline core barrels56/42 HagbyImpregnated (DBT) bits 56/42 Hagby
Size Design Rock formation Rock Group/Height Waterways Product No.
56/42 Hagby Extremely hard, Non abrasive SC10/4 10ECF 3702 6982 00
56/42 Hagby Hard-Very hard, Slightly abrasive SC10/5 JET 4CF 3702 7113 00
56/42 Hagby Very hard, Slightly abrasive very competent SC9/5 JET 4CF 3702 7114 00
56/42 Hagby Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6981 00
56/42 Hagby Hard-Very hard, Polishing KS(S++)/4 10CF 3702 6984 00
56/42 Hagby Medium Hard-Very Hard moderately abrasive SC7-9/4 10CF 3702 7112 00
56/42 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6983 00
56/42 Hagby Medium hard-hard, Abrasive+mixed SC6-8/5JET 4CF 3702 7176 00
Tungsten carbide bits 56/42 HagbySize Design Rock formation Type Waterways Product No.
56/42 Hagby Soft Corborit 3702 7169 00
Reaming shells (RES) 56/42 HagbySize Design Rock formation Type Waterways Product No.
56/42 Hagby Surface set rib type 3702 6985 00
66 HagbyImpregnated (DBT) bits 66 Hagby
Size Design Rock formation Rock Group/Height Waterways Product No.
66 Hagby Extremely hard, Non abrasive SC10/4 10ECF 3702 6798 00
66 Hagby Extremely hard, Non abrasive SC10/5 JET 6CF 3702 7164 00
66 Hagby Very hard-Extremely hard, Slightly abrasive SC9-10/4 10CF 3702 6682 00
66 Hagby Hard-Very hard, Slightly abrasive SC8-9/4 10CF 3702 6938 00
66 Hagby Hard-Very hard, Slightly abrasive SC8-9/5 JET 6CF 3702 7099 00
66 Hagby Medium Hard-Very Hard moderately abrasive SC7-9/4 10CF 3702 7081 00
66 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6885 00
66 Hagby Medium hard-hard, Abrasive+mixed SC6-8/5 JET 6CF 3702 7097 00
Tungsten carbide bits 66 HagbySize Design Rock formation Type Waterways Product No.
66 Hagby Soft Corborit 3702 7061 00
Reaming shells (RES) 66 HagbySize Design Rock formation Type Waterways Product No.
66 Hagby Surface set rib type T.B.A.
41Products in bold are stock items, other items are produced to order.
Bits for wireline core barrels76 Hagby
Impregnated (DBT) bits 76 HagbySize Design Rock formation Rock Group/Height Waterways Product No.
76 Hagby Extremely hard, Non abrasive SC10/4 10CF 3702 7204 00
76 Hagby Very hard-Extremely hard, Slightly abrasive SC9-10/4 10CF 3702 6571 00
76 Hagby Hard-Very hard, Polishing KS(S++)/4 10CF 3702 6392 00
76 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 10CF 3702 6878 00
Reaming shells (RES) 76 HagbySize Design Rock formation Type Waterways Product No.
76 Hagby Surface set rib type T.B.A.
77-3 Hagby Impregnated (DBT) bits 77-3 Hagby
Size Design Rock formation Rock Group/Height Waterways Product No.
77-3 Hagby Extremely hard, Non abrasive SC10/4 12CF 3702 6763 00
77-3 Hagby Extremely hard, Non abrasive SC10/5 JET 8CF 3702 7111 00
77-3 Hagby Very hard-Extremely hard, Slightly abrasive SC9-10/4 12CF 3702 6963 00
77-3 Hagby Very hard-Extremely hard, Slightly abrasive SC9-10/5 JET 8CF 3702 7098 00
77-3 Hagby Hard-Very hard, Slightly abrasive KS(S++)/3 12CF 3702 6749 00
77-3 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 12CF 3702 6803 00
Tungsten carbide bits 77-3 HagbySize Design Rock formation Type Waterways Product No.
77-3 Hagby Soft Corborit 3702 7015 00
Reaming shells (RES) 77-3 HagbySize Design Rock formation Type Waterways Product No.
77-3 Hagby SC STD 3702 6854 00
77-3 Hagby SC FH 3702 6856 00
103 HagbyImpregnated (DBT) bits 103 Hagby
Size Design Rock formation Rock Group/Height Waterways Product No.
103 Hagby Extremely hard, Non abrasive SC10/4 To be adviced
103 Hagby Hard-Very hard, Slightly abrasive KS(S++)/4 To be adviced
103 Hagby Medium hard-hard, Abrasive+mixed SC6-8/4 To be adviced
Reaming shells (RES) 103 HagbySize Design Rock formation Type Waterways Product No.
103 Hagby Surface set rib type To be adviced
42 Products in bold are stock items, other items are produced to order.
Craelius non-coring bits 46 - 76Diamond surface set Diamy bits 46-76
Size Conn. Box
Rock formation Diamond size/Quality Profile Product No.
46 Cr 42 Soft-Medium hard 20/25 S Concave 3702 6718 00
56 Cr 50 Soft-Medium hard 20/25 S Concave 3702 6867 00
66 Cr 50 Soft-Medium hard 20/25 S Concave 3702 6880 00
76 Cr 50 Soft-Medium hard 20/25 S Concave 3702 6720 00
Craelius rod shoes (ROS) for wireline rods N, H, P, SImpreganted (DBT) ROS N, H, P, S
Size Rod conn.
ID(mm) Type Product No.
N NK, NO 60,3 SC HD 3702 7179 00
H HK, HO 77 SC HD 3702 7181 00
P PG, PO 102,5 SC HD 3702 7183 00
S SG 125 SC HD 3702 6918 00
BS tools for single tube coringCombine A + B + C with selected wire line rod (BQ,NQ or HQ)A. Impregnated (Diaborit) bits for single tube drilling with wireline rods BS, NS, HS
Size ID(mm) Matrix type/Height Product No.
BS 41,7 KS(S++)/3 3702 6784 00
NS 51,7 KS(S++)/3 3702 6785 00
HS 71,6 KS(S++)/3 3702 6912 00
B. Stabilizer/Reaming shell BS, NS, HS
Size Rod conn. Type Product No.
BS BQ, BO Blanc 3702 6557 00
NS NQ, NO Blanc 3702 6558 00
NS NQ, NO Surface set 3702 6822 00
HS HQ, HO Surface set 3702 6809 00
C. Core lifter BS, NS, HS
Size ID(mm) Product No.
BS 41,7 3863 7202 00
NS 51,7 3863 7203 00
HS 71,6 3863 7212 00
Special diamond tools
43Products in bold are stock items, other items are produced to order.
Hole opener/Reamer
Reaming shell
Drill bit
Drill bit
Drill bit
5
4
3
1
2
Craelius "hole opener" adapter kitsA flexible and economic solution to get a larger hole size with a combination from the cataloge selected standard reaming shells and bits1. Not able to reach TD (Total depth) with present hole size, and need to case.2. Earlier drilled hole needs larger hole size for new investigation. 3. Machine capacity to weak to drill required hole size, reaming a solution.
Opening Size Diamond products to be used (ordered separately from bit range in earlier pages)
Adapter kit
Position no. Product No.
A - B Core bit AQ, BQ and Reaming shell BQ 1, 5 3702 6914 00
B - N Core bit BQ, NQ and Reaming shell NQ 1, 5 3702 6915 00
N - H Core bit NQ, HQ and Reaming shell HQ 1, 5 3702 6916 00
46 - 56 (mm) Core bit 46T2, 56T2 and Reaming shell 56T2 1, 5 3702 6889 00
46 - 66 (mm) Core bit 46T2, 56T2, 66T2 and Reaming shell 66T2 1, 3, 4 ,5 3702 6890 00
56 - 66 (mm) Core bit 56T2, 66T2 and Reaming shell 66T2 1, 2, 5 3702 6891 00
56 - 76 (mm) Core bit 56T2, 66T2, 76T2 and Reaming shell 76T2 1, 2, 3, 4, 5 3702 6892 00
66 - 76 (mm) Core bit 66T2, 76T2 and Reaming shell 76T2 1, 2, 5 3702 6893 00
66 - 86 (mm) Core bit 66T2, 76T2, 86T2 and Reaming shell 86T2 1, 2, 3, 4, 5 3702 6894 00
76 - 86 (mm) Core bit 76T2, 86T2 and Reaming shell 86T2 1, 2, 5 3702 6895 00
76 - 101 (mm) Core bit 76T2, 86T2, 101T2 and Reaming shell 101T2 1, 2, 3, 4, 5 3702 6896 00
86 - 101 (mm) Core bit 86T2, 101T2 and Reaming shell 101T2 1, 2, 5 3702 6897 00
44
BIT
RE
CO
RD
CH
AR
T –
TE
ST
RE
PO
RT
Bit
:Ty
pe:
Par
t n
um
ber
:S
eria
l nu
mb
er:
Bit
len
gth
:C
ore
bar
rel:
Dri
ll si
te:
Mac
hin
e:
Products in bold are stock items, other items are produced to order.
Casing shoes
Surface set (DMY) shoeSize Casing Rock formation Diamond size,
QualityProduct Number
76 74/67 Medium - hard 30/50 S 8370 1788 27
86 84/77 Medium - hard 30/50 S 8370 1788 35
101 98/89 Medium - hard 30/50 S 8370 1788 43
116 113/104 Medium - hard 30/50 S 8370 1788 50
B W Medium - hard 30/50 S 8370 1788 92
N W Medium - hard 30/50 S 8370 1789 00
H W Medium - hard 30/50 S 8370 1789 18
Tungsten carbide (CRB) shoeSize Design Rock
formation Type Waterways Product Number
46 44/37 Soft Corborit 4CF 8372 0820 01
56 54/47 Soft Corborit 4CF 8372 0822 09
66 64/57 Soft Corborit 6CF 8372 0824 07
76 74/67 Soft Corborit 6CF 8372 0826 05
86 84/77 Soft Corborit 6CF 8372 0828 03
101 98/89 Soft Corborit 6CF 8372 0830 09
116 113/104 Soft Corborit 8CF 8372 0832 07
131 128/119 Soft Corborit 8CF 8372 0834 05
146 143/134 Soft Corborit 10CF 8372 0836 03
A W Soft Corborit 8CF 8372 0850 04
B W Soft Corborit 8CF 8372 0852 02
N W Soft Corborit 10CF 8372 0854 00
H W Soft Corborit 12CF 8372 0856 08
P W Soft Corborit 15CF 8372 0858 06
S W, WG Soft Corborit 20CF T.B.A.
Craelius casing shoesImpregnated (DBT) shoe
Size Casing Rock formation Type Waterways Product No.
46 44/37 Hard - very hard (Heavy Duty recommended for drilling) SC HD 4CF 3702 7140 00
46 44/37 Hard - very hard SC STD 4CF 3702 7139 00
56 54/47 Hard - very hard (Heavy Duty recommended for drilling) SC HD 4CF 3702 7142 00
56 54/47 Hard - very hard SC STD 4CF 3702 7141 00
66 64/57 Hard - very hard (Heavy Duty recommended for drilling) SC HD 6CF 3702 7144 00
66 64/57 Hard - very hard SC STD 6CF 3702 7143 00
76 74/67 Hard - very hard (Heavy Duty recommended for drilling) SC HD 6CF 3702 7146 00
76 74/67 Hard - very hard SC STD 6CF 3702 7145 00
86 84/77 Hard - very hard (Heavy Duty recommended for drilling) SC HD 6CF 3702 7148 00
86 84/77 Hard - very hard SC STD 6CF 3702 7147 00
101 98/89 Hard - very hard (Heavy Duty recommended for drilling) SC HD 6CF 3702 7150 00
101 98/89 Hard - very hard SC STD 6CF 3702 7149 00
116 113/104 Hard - very hard (Heavy Duty recommended for drilling) SC HD 8CF 3702 7152 00
116 113/104 Hard - very hard SC STD 8CF 3702 7151 00
131 128/119 Hard - very hard (Heavy Duty recommended for drilling) SC HD 8CF 3702 7154 00
131 128/119 Hard - very hard SC STD 8CF 3702 7153 00
146 143/134 Hard - very hard (Heavy Duty recommended for drilling) SC HD 10CF 3702 7156 00
146 143/134 Hard - very hard SC STD 10CF 3702 7155 00
A W Hard - very hard (Heavy Duty recommended for drilling) SC HD 8CF 3702 6998 00
A W Hard - very hard SC STD 8CF 3702 6999 00
B W Hard - very hard (Heavy Duty recommended for drilling) SC HD 8CF 3702 6996 00
B W Hard - very hard SC STD 8CF 3702 6997 00
N W Hard - very hard (Heavy Duty recommended for drilling) SC HD 10CF 3702 6994 00
N W Hard - very hard SC STD 10CF 3702 6995 00
H W Hard - very hard (Heavy Duty recommended for drilling) SC HD 12CF 3702 6992 00
H W Hard - very hard SC STD 12CF 3702 6993 00
P W Hard - very hard (Heavy Duty recommended for drilling) SC HD 15CF 3702 6990 00
P W Hard - very hard SC STD 15CF 3702 6991 00
S W, WG Hard - very hard (Heavy Duty recommended for drilling) Impreg 20CF 8370 1791 97
Dat
eFr
om
ToC
ore
len
gth
Tota
lR
PM
Flu
shin
gW
.O.B
.D
rilli
ng
tim
eP
enet
rati
on
ra
teN
um
ber
s o
f sh
arp
enin
gB
it le
ng
ht
Bit
O
DB
id
IDW
ear
Rem
ark/
form
atio
n/r
ock
BIT
RE
CO
RD
CH
AR
T –
TE
ST
RE
PO
RT
Bit
:Ty
pe:
Par
t n
um
ber
:S
eria
l nu
mb
er:
Bit
len
gth
:C
ore
bar
rel:
Dri
ll si
te:
Mac
hin
e:
Ple
ase,
fo
rwar
d s
oo
nes
t to
: A
tlas
Co
pco
GD
E, A
tt: P
eter
Hed
enst
edt,
SE
-195
82
Mär
sta,
Sw
eden
, Tel
efax
: +46
8 5
91 1
87 8
2, e
-mai
l: p
eter
.hed
enst
edt@
se.a
tlas
cop
co.c
om
46
Super Cutter (SC) range
nLong life, free cutting Extremely high impregnation, skilled engineering and unique production methods combined with high quality components.
n Wide range of applications Just a few matrices cover all rock formations.
n Fast and efficient penetration Unique matrix alloy design, allows worn diamonds to be replaced instantly by new diamonds.
Use recommended drilling parameters and the Super Cut-ter bit will give optimal performance provided the matrix selected is suitable for the actual rock formation.
COMPARISON CHART - The new rock group standard versus Craelius old metric names
Rock groups 1 - 4 5 6 7 8 9 10
Old matrices HH, KH KH, KX KH,HM, KM, KX HM, KM, KX KX, KS(S++) KS(S++) KS(SS)
SC ROCK GROUP ROCK CHARACTERISTICS ROCK TYPE
1 - 4Soft or medium softVery abrasiveHighly fractured
Unmetamorphosed or weakly metamorphosed shales, sandstone and lime-stone
5Medium softAbrasive Fractured
Limestone and dolomite. Weathered granite and gneiss. Serpentinite and metaperidotite.
6HardAbrasiveFairly competent
Unmetamorphosed or weakly metamorphosed diorite, gabbro peridotite and gneiss. Basalt, andesite.
7Medium hardModerately abrasiveCompetent
Metabasalt, amphibolite. Metamorphosed diorite and gabbro. Diabase.
8HardModerately abrasiveCompetent
Quartz rich skarn. Granite and pegmatite. Weakly metamorphosed intermedi-ate and acid volcanic.
9Very hardSlightly abrasiveVery competent
Metamorphosed granitic rock and wuartz quartz rich gneiss.
10
Extremely hardNon-abrasiveFine grainVery competent
Chert and jasperite. Quartzite. Highly metamorphosed acid volcanic.
’’Super Cutter’’ the new classification systemnThe rock formation characteristics are organized in groups 1-10. nEach group identifies a certain rock type. nOur new Super Cutters are identified with an applicable rock group number combination, instead of just a matrix name.
47
Very abrasive
Abrasive
Medium abrasive
Slightly abrasive
Non-abrasive
ChertJasperite
DioriteGraniteGneiss
QuartziteGranite skarns
PegmatiteQuartz
SilicifiedVolcanics
BasaltDiorite
DiabaseGabbro
DolomiteWeathered granite
SerpentinePeridotite
Conglomerates
Glassy quartzRhyolite
Sandy shalesSandstone
SandyLimestone
Rock type Bit type
SC2
SC4-5
SC5-6
SC6-8
SC7-9
SC8-9
SC9-10
SC10
Bit application chart
Atlas Copco Geotechnical Drilling and Explorationwww.atlascopco.com
6991
035
2 01
f M
ärst
a, S
wed
en, 2
8 Ja
nuar
y, 2
008
© C
opyr
ight
200
8, A
tlas
Cop
co C
rael
ius
AB
, Mär
sta,
Sw
eden
. Any
una
utho
rized
use
or c
opyi
ng o
f the
con
tent
s or
any
par
t the
reof
is p
rohi
bite
d. T
his
appl
ies
in
parti
cula
r to
trade
mar
ks, m
odel
den
omin
atio
ns, p
art n
umbe
rs a
nd d
raw
ings
. Illu
stra
tions
and
pho
tos
in th
is b
roch
ure
may
sho
w e
quip
men
t with
opt
iona
l ext
ras.
S
peci
ficat
ions
and
equ
ipm
ent s
ubje
cts
to c
hang
e w
ithou
t not
ice.
Con
sult
your
Atla
s C
opco
Cus
tom
er C
ente
r for
spe
cific
info
rmat
ion.