WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. qTy. DescripTionDrawbar oem kiTs
83637 1 Dodge magnum hitch, 2,000 lbs. (includes pin and clip)
invisi-hiTch accessories
28451 1 Drawbar Kit, 2,000 lbs. (includes swivel pin)
28351 1 accessory adapter Kit (includes swivel pin)
parT no. DescripTion raTing (lbs.) gTw/Tw lengTh max. rise max. Dropquick release aDjusTable ball mounT (quick release pin anD clip)
6580 Complete Shank and head assembly 6,000/600 12” 6-1/8” 7-3/8”
aDjusTable ball mounT1420 Complete Shank and head assembly 5,000/500 12” 6” 7-1/4”1422 Complete Shank and head assembly 5,000/500 14” 6” 7-1/4”1424 Complete Shank and head assembly 5,000/500 16” 6” 7-1/4”
aDjusTable ball mounT wiTh sway conTrol Tab (plaTform mounTs for lefT or righT hanD)7390 Complete Shank and head assembly 6,000/600 12” 3-3/4” 5-1/4”
all h
itch
balls
bui
lt w
ith w
renc
h fla
ts
inTerchangeable hiTch ball sysTemDesigned to accommodate towing multiple trailers with ease, tow ready interchangeable hitch Ball System allows you to change hitch ball sizes in seconds without any tools. available in 2 and 3-ball sets, these kits feature a quick-release, positive-latch design. available in 3/4” and 1” shank models.
parT no. qTy. DescripTion max gTw (lbs.)replacemenT parTs
63805 1 1-7/8” interchangeable hitch Ball head - 63806 1 2” interchangeable hitch Ball head - 63807 1 2-5/16” interchangeable hitch Ball head - 63808 1 3/4” interchangeable hitch Ball Shank 5,000 63809 1 1” interchangeable hitch Ball Shank 8,000
parT no. qTy. shank ball a ball b ball c max gTw (lbs.)inTerchangeable hiTch ball sysTem
63801 1 Set 3/4” 1-7/8” 2” - 5,00063802 1 Set 1” 1-7/8” 2” - 8,00063804 1 Set 1” - 2” 2-5/16” 8,00063803 1 Set 1” 1-7/8” 2” 2-5/16” 8,000
• innovative quick release changes balls in seconds• rated capacities up to 8,000 lbs.• Durable heat treated shank• New positive latch design• No special tools required
sTep 1: aTTach shank• attach correct shank to drawbar or ball mount• torque to required tightness
sTep 2: aTTach ball• Select the correct ball size for your trailer• place ball on shank
sTep 3: TighTen locking heaD• innovative locking screw requires only 1/4 turn to secure• No need for special tools
you’re Tow reaDy!
63880
63826-006
63851
* ultra Frame or titan receiver and ball mount must be used to achieve 14,000 lbs. rating. Consult tow vehicle owners manual for maximum towing capacities.
• Cold forged for superior strength• when installing hitch balls, torgue all 3/4” shank dia. (B) balls to 160 ft. lbs., 1” shank dia. (B) balls to 250 ft. lbs., and 1-1/4” shank dia (B) balls to 450 ft. lbs.
ball Dia. a
finish
zinc chromeshank Dia. b
shank lengTh c
DrawbarThickness
range
gTw gvwr
raTingbulk hiTch balls *1-7/8” 63811 63810 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” 63813 63812 3/4” 2-3/8” 3/8”-1-3/8” 2,0001-7/8” - 63814 3/4” 3-3/8” 3/8”-2-1/8” 2,0001-7/8” 63817 63816 1” 2-1/8” 3/8”-3/4” 2,0001-7/8” 63819 63818 1” 3-3/8” 3/8”-2-1/8” 2,000
2” 63821 63820 3/4” 1-1/2” 3/8”-5/8” 3,5002” 63823 63822 3/4” 2-3/8” 3/8”-1-3/8” 3,5002” - 63824 3/4” 3-3/8” 3/8”-2-1/8” 3,5002” 63827 63826 1” 2-1/8” 3/8”-3/4” 6,0002” 63829 63828 1” 3-3/8” 3/8”-2-1/8” 6,0002” 63831 63830 1-1/4” 2-3/4” 3/8”-1” 8,000
2-5/16” 63833 63832 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” 63835 63834 1-1/4” 2-3/4” 3/8”-1” 12,0002-5/16” - 63836# 1-1/4” 2-3/4” 3/8”-1” 14,0002-5/16” - 63838# 1-1/4” 2-3/4” 3/8”-1” 17,000
packageD hiTch balls1-7/8” 63881 63880 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” - 63882 3/4” 2-3/8” 3/8”-1-3/8” 2,0001-7/8” 63885 63884 1” 2-1/8” 3/8”-3/4” 2,000
2” 63888 63887 3/4” 1-1/2” 3/8”-5/8” 3,5002” - 63889 3/4” 2-3/8” 3/8”-1-3/8” 3,5002” 63892 63891 1” 2-1/8” 3/8”-3/4” 6,000
2-5/16” 63895 63894 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” 63897 63896 1-1/4” 2-3/4” 3/8”-1” 12,000
packageD hiTch balls (6 pack reTail Display)1-7/8” - 63810-006 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” - 63816-006 1” 2-1/8” 3/8”-3/4” 2,000
2” - 63826-006 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” - 63832-006 1” 2-1/8” 3/8”-3/4” 6,000
packageD sTainless sTeel hiTch balls1-7/8” Stainless
SteelFinish
63851 1” 2-1/8” 3/8”-3/4” 2,0002” 63852 1” 2-1/8” 3/8”-3/4” 6,000
2-5/16” 63853 1” 2-1/8” 3/8”-3/4” 6,000
we offer ball mounts and drawbars in three separate styles: straight cut, angle cut and drop cut. refer to the styles below to select the mount that best suits your needs.
3590 35943593
36051 36063 36071
83637
28351
28451
Drawbar Types
HITCH ACCESSORIES
Drop Not availaBle
™
B
parT no. raTing (lbs.) gTw/Tw ball hole size a lengTh b rise c Drop sTyle3590 2,000/200 3/4” 6-5/8” 5/8” N/a 13591 2,000/200 3/4” 9-3/4” 5/8” N/a 13592 2,000/200 3/4” 9-3/4” 2-1/8” 2-3/4” 23593 2,000/200 3/4” 6-5/8” 2-1/8” 2-3/4” 33594 2,000/200 3/4” 10” 4” N/a 2
• Boxs includes drawbar, pin and clip• Black powder coat finish
• Boxs includes drawbar, pin and clip• Black powder coat finish
Note: Class i drawbar applications are specific. the correct replacement drawbar part number is listed on each
Class i hitch installation instruction sheet.
class i Drawbar kiTs
class ii Drawbar kiTs parT no. raTing (lbs.) gTw/Tw ball hole size a lengTh b rise c Drop sTyle
36051 3,500/300 3/4” 7” 5/8” 1-1/4” 136053 3,500/300 3/4” 9-3/4” 5/8” 1-1/4” 136061 3,500/300 3/4” 9-3/4” 3-1/8” N/a 236063 3,500/300 3/4” 11-3/4” 3-1/8” N/a 236065 3,500/300 3/4” 10” 5” N/a 236071 3,500/300 3/4” 7-3/16” 2-5/8” 3-1/4” 336078* 3,500/300 3/4” 7-3/8” - 4-3/4” 3
* Fits 1-1/4” oem Ford explorer, lincoln aviator & mercury mountaineer hitchNote: Class ii drawbar applications are specific. the correct replacement drawbar part number is listed on each Class ii hitch installation instruction sheet.
STYLE 1 STYLE 2 STYLE 3
specialTy ball mounTs
65801420
1422
1424
7390
• Shank can be used in rise or drop position • Black powder coat finishNote: hitch ball, pin (55010) and clip (55515) sold separately. Not interchangeable with weight distribution replacement parts
adjustable ball mounts are perfect for those who tow multiple trailers of varying coupler heights.
solid steel hitch balls engineered to meet all safetyrequirements of vesc regulation v-5
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. qTy. DescripTionhiTch ball wrench
62342 1
hitch Ball wrench, boxed end 1-1/8” & 1-1/2”
ball mounTs
ball mounTs
selecTing The proper ball mounT: ball mounT measuremenTsrise
Distance from the top of the shank to the
top of the ball platform
rise
DropDistance from the top of the shank to the top
of the ball platform
drop
oNe wreNCh tiGhteNiNG SyStem interlock™ balls and ball mounts act as a “one wrench tightening System” when used together. Standard hitch balls and ball mounts may also be used with interlock™ products but require two wrenches for installation.
when installing interlock• ™ hitch balls, torque all 1” shank balls to 250 ft. lbs.
interlock• ™ solid steel hitch balls are engineered to meet all safety requirements of veSC regulation v-5.
inTerlock™ hiTch balls & ball mounTs
no more scraTcheD or marreD hiTch balls
62342
62342
40792
63842
62807
parT no.
bulk parT no.
raTing (lbs.) gTw/Tw
ball hole size
a lengTh
b rise
c Drop sTyle
max frame mounT kiTs - class iii/iv (2” ball mounT)2923 - 6,000/600 1” 8-1/2 3/4” 2” 22953 - 6,000/600 1” 9” 2-3/4” 4” 2
easy loaD ball mounTs (2” x 2” shank & angle cuT Design)*40342 40342-006 6,000/600 1” 8-1/2” 3/4” 2” 2*40343 40343-006 6,000/600 1“ 10-1/2” 3/4” 2” 2*40344 40344-006 6,000/600 1” 9” 2-3/4” 4” 2*40345 40345-006 6,000/600 1” 11” 2-3/4” 4” 2*40346 40346-002 6,000/600 1” 9-3/4” 4-3/4” 6” 2
uTiliTy ball mounTs (2” ball mounT & bulk boxeD)*2736 2736-006 5,000/500 1” 12” 3/4” 2” 1*2793 2793-002 5,000/500 1” 10” 6-3/4” 8” 3*2706 - 3,500/350 1” 9” 9-3/4” - 3
- - 5,000/500 1” 9” - 11
packageD angleD cuT ball mounTs (2” ball mounT)40446 - 6.000/600 1” 10-1/2” 3/4” 2” 240445 - 6.000/600 1” 11” 2-3/4” 4” 240446 - 6.000/600 1” 9-3/4” 4-3/4” 6” 2
parT no. raTing (lbs.) gTw/Tw
a lengTh
c Drop
ball size secure
class iii sTanDarD Towing sTarTer kiTs (2-pack)40563-002 6,000/600 8-1/2” 2” 2” pin/Clip40564-002 2,000/600 8-1/2” 2” 1-7/8” pin/Chip40566-002 6,000/600 9” 4” 2” pin/Clip
parT no. DescripTionTowing sTarTer kiTs
40349 towing Starter Kit, 6,000 Gtw rating
parT no.
raTing (lbs.) gTw/Tw
ball hole size
a lengTh
b rise c Drop sTyle
soliD forgeD ball mounTs (black powDer coaT finish)40330 12,000/1,200 1-1/4” 8-1/2” 1” 2” -40331 12,000/1,200 1-1/4” 9-1/4” 3” 4” -40332 12,000/1,200 1-1/4” 10-1/4” 5” 6” -
aluminum soliD forgeD ball mounTs (aluminum finish)40381 8,000/800 1” 9-7/8” 1” 2” -40382 8,000/800 1” 10-5/8” 3” 4” -40383 8,000/800 1” 11-7/8” 5” 6” -40384 6,000/600 1” 10-7/8” 7” 8” -
sTainless sTeel ball mounTs40172 6,000/600 1” 9” 3/4” 2” -40176 6,000/600 1” 9-1/2” 2” 3-1/4” -
class iv ulTra frame hollow shank ball mounTs (black powDer coaT finish)40200 10,000/1,000 1-1/4” 8-1/2” 3/4” 2” 140201 10,000/1,000 1-1/4” 9” 2-3/4” 4” 340202 10,000/1,000 1-1/4” 11-1/4” 2-3/4” 4” 340205 10,000/1,000 1-1/4” 9” - 6” 340206 10,000/1,000 1-1/4” 9” - 8” 3
class iv ulTra frame soliD shank ball mounTs (Durable zinc coaTeD finish)4280 12.000/1,200 1-1/4” 8-1/2” 1” 2” 14284 12,000/1,200 1-1/4” 12” 1” 2” 14081 12,000/1,200 1-1/4” 8-1/2” 3” 4” 34285 12,000/1,200 1-1/4” 12” 3” 4” 34282 12,000/1,200 1-1/4” 9-1/2”” 5” 6” 34283 12,000/1,200 1-1/4” 9-1/2” 7” 8” 3
Note: * piN aND Clip Not iNCluDeD
40342
40443 2923
2736
40172
40176
40330
40331
40332
40381
40382
40384
• Solid one- piece forged construction• 1” thick x 3” wide ball platforms• angled, easy-load design
• 2” receiver opening• Brushed stainless steel ball mount (Draw-tite & reese)• polished stainless steel ball mount (hidden hitch)• resists rust and corrosion• available in 2” and 3-1/4” drops with same angle cut as quick- loading ball mounts
sTyle 3
sTyle 1
42804282
• 2” square solid shanks• 1-7/8” and 2” hitch ball interchangeable hitch ball system• 1” shank• Standard ball mount: 8-1/2” length, 3/4” rise, 2” drop• includes pin and clip• Black powder coat finish
• point of purchase retail display• two kits per display box• 2” square box opening
40349
40563-002
• includes 2” hitch ball• includes receiver lock• Black powder coat finish
Towing sTarTer kiTs
parT no. ball Dia. shank Dia. shank lengTh lifT capaciTy (lbs.)chrome inTerlockTm hiTch balls
62807 1-7/8” 1” 2” Standard 2,000 lbs.62803 2” 1” 2” Standard 6,000 lbs.62806 2-5/16” 1” 2” Standard 6,000 lbs.
sTainless sTeel inTerlockTm hiTch balls63842 1-7/8” 1” 2” Standard 2,000 lbs.63843 2” 1” 2” Standard 6,000 lbs.63844 2-5/16 1” 2” Standard 6,000 lbs.
class iii inTerlockTm ball mounTs40792 1” 9” 2” 3/4” 6,000/60040793 1” 9-1/2” 3-1/4 2” 5,000/50040794 1” 10” 5-1/4 2” 5,000/500
• includes pin and clip• Black powder coat finish
parT no. raTing (lbs.) gTw/Tw a lengTh b rise c Drop secureclass iii inTerlock Towing sTarTer kiTs
40565 6,000/600 8-1/2” 3/4” 2” lock
8041063037
57615762
parT no. DescripTion ball mounT gTw/Tw (lbs.)
clevis mounT gTw/Tw (lbs.) lengTh
clevis mounTs5761 3/4””hole 3,500/350 5,000/350 9-3/4”
5762 1” hole 6,000/600 6,000/600 8-7/8”
80410* 1” hole 6,000/600 6,000/600 11”
6201 1” hole 6,000/600 10,000/1,000 8-7/8”
5763 3/4” dia. - - 4-1/4”
5764 1” dia. - - 4-3/4”
• For use with industrial/ agricultural equipment
* Ball mount has 1-1/4” drop, Clevis has 3” drop
• includes 2” hitch ball, pin & clip
lengThDistance from the center
of the ball hole to the center of the pin hole
length
sTyle 3 Drop cuT:
sTyle 2 angle cuT:
HITCH ACCESSORIES
parT no. qTy. DescripTionclevis & ball mounT combo
63037 1 8-1/2” length, 6,000 Gtw
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. qTy. DescripTionhiTch ball & ball mounT bags
7627 1 (ball mount not included)6352 1 (ball not included)
Conveniently stores • interchangeable and removable hitch balls when not in use• Features a hook and loop closure to secure ball and keep vehicle clean• Durable nylon design provides years of use
80404
80405
80406
80401
80403
80402
80407
8041580408
80400 80470
7627
6352
parT no. DescripTion raTing (lbs.) gTw/Tw shank lengTh ball size rise or Drop2-ball hollow shank
80404 2-Ball Ball mount, Black hollow Shank
2,000/200 6,000/600 - 1-7/8” 2” rise
Drop
80405 2-Ball Ball mount, Black hollow Shank
2,000/200 6,000/600 - 1-7/8” 2” Drop
rise
80406 2-Ball Ball mount, Black hollow Shank
6,000/600 6,000/600 - 2”
2-5/16”Droprise
2-ball soliD shank
80401 2-Ball Ball mount, Black Solid Shank
2,000/200 6,000/600
8”8”
1-7/8”2” -
80402 2-Ball Ball mount, Chrome Balls, Black, Solid Shank
6,000/60010,000/1,000
8”8”
2”2-5/16” -
80403 2-Ball Ball mount, Black Solid Shank
2,000/600 6,000/600
8”8”
1-7/8”2” -
80407 2-Ball Ball mount, Chrome Balls, Black, Solid Shank
6,000/60010,000/1,000
8”8”
2”2-5/16” -
3-ball soliD shank
80408 3-Ball Ball mount Black Solid Shank & Balls
2,000/2006,000/600
10,000/1,000
8”8”
6-3/4”
1-7/8”2”
2-5/16”-
80415 3-Ball Ball mount, Chrome Balls, Black Solid Shank
2,000/2006,000/600
10,000/1,000
8”8”
6-3/4”
1-7/8”2”
2-5/16”-
reversible ball mounTs
hiTch accessories
parT no. qTy. DescripTionbumper guarD, “The hiTch guiDe-anD-sTop”
80400 1 Black80470 1 Diamond plate
parT no. qTy. DescripTionreceiver aDapTers
80300 1 2” to 1-1/4”, 7” long, 3,500 lbs.
80301 1 2” to 1-1/4”, 14” long, 3,500 lbs.
80302 1 2” to 1-1/4”, 18” long, 3,500 lbs.
80303 1 1-1/4” to 2”, 6” long, for Class ll only; 3,500 lbs.
80304 1 1-1/4” to 2”, 6”, 10” long, for Class ll only; 3,500 lbs.
parT no. DescripTion. wc (lbs.) wD (lbs.) lengThreceiver exTensions
80307 receiver extension 3,500 - 8”80305 receiver extension 3,500 - 14”80306 receiver extension 3,500 - 18”
45292 titantm receiver extension
6,0004,500
8,0006,000
24”34”
45018 titantm receiver extension
5,0004,000
7,5006,000
41”48”
protects vehicle from coupler impact while backing up• •mounts to any ball mount with 1” hole•mounting surface must be flat
45292 80306
80300
80301
80303
8030480302
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
• ideal for cargo carriers & bike carriers• Designed to extend the receiver opening from 6” to 18”• use of this adapter reduces hitches’ tow rating by 50% & with a maximum rating of 3,500 lbs towing capacity
ideal for slide-out campers with extended • overhangs• Designed to extend the receiver opening 14”, 18”, 24”, 34”, 41” or 48”• 2” opening for use with standard ball mounts and hitch-mounted accessories• For use with receivers only• integrated electrical bracket attached
allows Class ii balls (3/4” shank) to be used in Class iii • ball mounts (1” hole) - applies to 80100• allows Class iii balls (1” shank) to be used in Class iv ball mounts (1-1/4” hole) - applies to 80106
• weight rating as per ball being used• 2” square hollow shank, rated up to 6,000 lbs. Gtw/600 lbs. tw
pinTle hooks & accessories
63013630146301563016
630106301163012
63020
630176301863019
63032
63056 63057
63058
63059
parT no. shank raTing (lbs.) gTw/Tw
shank lengTha b
shank Dia. / h
heighTc
wiDThD
holee
wiDTh f
heighTg
holeseTs
receiver exTensions63056 hollow 6,000/600 7-5/8” 3” 2” 5-1/2” 5” 17/32” 3-3/8” 1-3/4” 363057 Solid 12,000/1,200 7-5/8” 3-1/4” 2” 7-1/2” 5” 17/32” 3-3/8” 1-3/4” 463058 Solid 8,000/800 11-3/8” 3-1/4” 2” 12-1/2” 5” 17/32” 3-3/8” 1-3/4” 763059 Solid 12,000/1,200 11-3/8” 3-1/4” 2” 7-1/2” 5” 17/32” 3-3/8” 1-3/4” 445156* hollow 12,000/1,200 7-3/4” 3-1/4” 2-1/2” 6” 5” 17/32” 3-3/8” 1-3/4” 3
Converts receivers • for use with pintle- type trailers, quickly and easily• provides mounting for both ball and pintle and rigid type pintle hooks• pin and clip must be ordered separately
*titan pintle hook adapter mount
parT no. qTy. DescripTionpinTle hooks (incluDes mounTing harDware)
63013 1 5 ton, 2,000 lbs. max. vertical load, 10,000 lbs. Gtw63014 1 10 ton, 4,000 lbs. max. vertical load, 20,000 lbs. Gtw63015 1 15 ton, 6,000 lbs. max. vertical load, 30,000 lbs. Gtw63016 1 30 ton, 14,000 lbs. max. vertical load, 60,000 lbs. Gtw63032 1 replacement hardware mounting Kit
pinTle hook combinaTion hiTches (incluDes mounTing harDware)
63010 1 1-7/8” Combo hitch, 16,000 lbs. Gtw, ball rating 6,000 lbs.63011 1 2” Combo hitch, 16,000 lbs. Gtw, ball rating 10,000 lbs.63012 1 2-5/16” Combo hitch, 16,000 lbs. Gtw, ball rating 14,000 lbs.63032 1 replacement hardware mounting Kit
replacemenT parTs63017 1 1-7/8”” replacement Ball, 6,000 lbs., 1-1/4” diameter 63018 1 2” replacement Ball, 10,000 lbs., 1-1/4’ diameter63018 1 2-5/16” replacement Ball, 14,000 lbs., 1-1/4” diameter63020 1 replacement Snapper pin43031 1 5/16” Safety pin63032 1 replacement hardware mounting kit
parT no. qTy. DescripTion
28023 1 lunette ring lock (fits 2-1/2” & 3” diameter lunette rings)
4210 1 lunette ring lock
63023 1 lunette ring, 2-1/2” diameter with 4 hole base 42,000 lbs. Gtw
63033 1 hardware mounting Kit for 63023
63022 1 lunette ring, 2-1/2” diameter with 1-1/2” shank 15,000 lbs. Gtw
63021 1 adjustable lunette ring, 3” diam-eter w/channel 12,000 lbs. Gtw
parT no. qTy. DescripTionreDucer bushing
80100 1 1” oD to 3/4” iD80106 1 1-1/4” oD to 1” iD
63023
63022
28023
63021
luneTTe rings
HITCH ACCESSORIES
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
chrome/sTainless balls anD shanksDescripTion raTing parT no. parT no.chrome balls & shanks3/4” long Forged 5,000 ibs. 103* 103b*3/4” reg. Shank 3,500 ibs. 100* 100b*3/4” long Shank 3,500 ibs. 101* 101b*1” reg. Shanks 10,000 ibs. 102 102b1” extra long Shank 10,000 ibs. 105 105b1 7/8” Ball 300 300b2” Ball 400 400b2 5/16” Ball 600 600bSet: 3/4” reg. Shank, 1 7/8”& 2” Balls 3,500 ibs. 700* 700b*Set: 3/4” long Shank, 1 7/8” & 2” Balls 3,500 ibs. 800* 800b*Set: 1” reg. Shank, 1 7/8” 2” & 2 5/16” Balls 10,000 ibs. 900 900bSet: 1” reg. Shank, 1-7/8” & 2” Balls 10,000 ibs. 901 901bSet: 1” reg. Shank, 2” & 2-5/16” Balls 10,000 ibs. 904 904bSet: 1” Super long Shank, 1-7/8” & 2” Balls 10,000 ibs. 105l 105lbSet: Super long 1-7/8” & 2” and 2-5/16” Balls 10,000 ibs. 105T 105TbSet: 3/4” Forged Shank, 1-7/8” & 2” Balls 5,000 ibs. 801* 801b*
*2-5/16” Ball will not fit on 3/4” Shank • rated Class 4. rated v-5. meets Sae Standard J-684“B” packaged product
DescripTion raTing parT no. parT no.
sTainless sTeel balls & shanks3/4 “ long Shank 5,000 iBS 104* 104b*1” reg. Shank 10,000 iBS 106 106b1” extra long Shank 10,000 iBS 107 107b1-7/8” Ball 301 301b2” Ball 401 401b2-5/16” Ball* 601 601bSet: 3/4” long Shank, 1-7/8” & 2” Balls 5,000 lBS 802* 802b*Set: 1” reg. Shank, 1-7/8” 2” & 2-5/16” Balls 10,000 lBS 902 902b Set: 1” reg. Shank, 1-7/8” & 2” Balls 10,000 lBS 903 903b Set: 1” reg. Shank, 2” & 2-5/16” Balls 10,000 lBS 906 906b Set: 1” Super long Shank, 1-7/8”, 2” & 2-5/16” Balls 10,000 lBS 107T 107Tb Set: 1” Super long Shank, 1-7/8”& 2” Balls 10,000 lBS 107l 107lb
*2-5/16” Ball will not fit on 3/4” Shank • rated Class 4. rated v-5. meets Sae Standard J-684“B” packaged product
100
DeSCriptioN parT no. parT no.sTorage / accessories2-ball rack used to store balls. Balls are not included. 002 002b3-ball rack used to store balls. Balls are not included. 003 003b3-ball plastic box used to store and protect balls with cover. Colors: Grey or tan.Balls are not included. 004 004b
Shank cover in red, black or grey. 005 005bwood display with pieces. included: 3/4” reg., 3/4” long and 1” stand. Shanks: 1-7/8,” 2” and 2-5/16” chrome balls. Db6
“B” packaged product
ball mounTs 5Th wheel To
gooseneck aDapTers
afTermarkeTpinTle couplers
101 102 105
2 5/16”2”1 7/8”
1 3/4”2 1/4”
2 1/4” 3”
003
004
0058
D86
am-sc series• acts as a shock absorber• protects the towing vehicle’s
driveline, hitch assembly and trailer contents.
• easy to install. • proven effective in reducing
bounce and rhythmic vibrations. • For use with underframe receiver
hitch with a 2” square socket. • Class 4, v-5 SaFe!
cushioneD roll-a-hiTch. telescoping Cushioned hitch extends 7” beyond towing position and swivels 12” left and right for fast, easy hookups anywhere. Just pull forward to lock in center and then back up to lock in towing position. max trailer weight 10,000 lbs and maximum tongue weight 1000 lbs. per Sae J-684 v-5. hitch pins included.
cushioneD Tow-hookCushioned and chromed, the new Cushioned tow- hook is a versatile work horse. round out your product line with the Cushioned tow-hook... hundreds of agricultural, industrial and recreational uses.
lo 6 1/4” Droplr2 4 1/4” Droplr4 2 1/4” Drop
am-sc-2
am-sc-6
am-sc-8
am-sc-4
cushioneD new all casT boDy – 20,000 lb. raTeD cushioneD 360º• Safety chains standard• Fail safe king pin adapter• locks with padlock• available in 12” and 16” sizes with welded body
rh
5gx
cushioneD gooseneck30,000 lb. raTeD• 4” round pipe• Same cushioning system as C5G
non-cushioneD 7 1/2” offseT
non-cushioneD gooseneck wiTh 7 1/2” offseT
gx
cg
am-pc series is compatible with ph-1. Fits several aftermarket mounts as well. may be used as drops and risers. Shanks are 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives standard hitch pins (not included). use 4 grade 5 1/2” bolts. Be sure they are long enough for mounting purposes. maximum trailer weight of 10,000 lbs. maximum tongue weight of 2,000 lbs.
am-sc-4aDjusTable
am-sc-4aDjusTable
am-pc-1non
aDjusTable
hauling maDeeasier anD safer Slack Sack™ stores excess webbing in the bag with the ratchet strap at all times, while in use or in storage. made of durable, water resistant nylon pack cloth.
chain Tugger™ binDer takes up to 20” of slack without disconnecting the chain. 36” total length, hook to hook. Breaking limit of 10,000 lbs. working load limit 3,335 lbs.
lb201
HITCH ACCESSORIES
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
swinger hiTchthe 00106 Swinger hitch is cushioned! acts as a shock absorber, reducing bounce and rhythmic vibrations. 7” right and 7” left for easy hook up. available in a 2” rise, 0” drop and 4” drop. maximum trailer weight of 7,500 lbs. maximum tongue weight of 1000 lbs. rated v-5. meets Sae standard J-684. manufacturer’s lifetime warranty for materials and workmanship. Fair wear and tear excluded.
rear aTv universalCan be used as a 3-way if unit is fastened on with a 3/4” shank, standard trailer ball. a clevis type trailer can be towed by pinning the hitch through the big hole. large grommeted hole is for ropes/hooks.
Kit PN Make/Model
5432 03-07 Dodge Ram except Sport
6084 03-08 Hummer H2
5298 07-08 Toyota FJ Cruiser
4080 03-06 Chevrolet Silverado 07 Classic only
5452 07-08 Toyota Tundra
Upgrade or Add PIAA Quality lights with Complete Lamp Kits with Custom Brackets.
LAMP KITS
Toyota Tundra Kit
Ford Super Duty Kit
Dodge Ram Kit
Upgrade factory lights!
MOUNTING KITS
Kit PN Make/Model Application
30360 05-07 Ford Super Duty Mounts PIAA 410 (PN 4152) in factory location.
For more information see www.piaa.com
Toyota FJ Cruiser Kit
Hummer Kit
GMC Sierra Kit
afTermarkeTaDjusTable couplers
pinTle pinTle™
DescripTion parT no.
am-ac series & accessories
Drop or riser. Shank is a 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. with max tongue weight of 2,000 lbs. rated Class 4, v-5 and meets Sae Standard J684. Compatible with reese and Draw tight weight distribution hitches.
am-ac-1
ball mounT aDapTer. may be used with the amaC-1 with 3 1/2” x 3/4” 16-gauge 5 bolts ba-1
clevis pin aDapTer. Designed as an agricultural clevis hitch and may also be used as a ball mount. Shank hole is 1” diameter. may be used with am-aC-1 with 3 1/2” x 3/4”, grade 5 bolts.
ca-1
pin hiTch aDapTer. Compatible with ph-1. use 4 grade 5 1/2” x 13 bolts. Be sure they are long enough for mounting purposes. may be used with am-aC-1 with 3 1/2” x 3/4”, grade 5 bolts.
pa-1
am-cc series are designed as aG hitches. Shanks are 2” x 2” tube with 1/4” wall thickness. Shank hole diameter is 1”. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. and maximum tongue weight of 1000 lbs. rated class 4. rated v-5. meets Sae standard J-684. For use with open-end receivers.
am-cc-1
am-cc series may be used as ball mounts but are designed as aG hitches. Shanks are 2” x 2” tube with 1/4” wall thickness. Shank hole diameter is 1”. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. and maximum tongue weight of 1000 lbs. rated class 4. rated v-5. meets Sae standard J-684. For use with open-end receivers.
am-cc-2
DescripTion parT no.
pinTles & accessories
bolT on pinTle hiTch w/sTainless sTeel 3 ball combination and pintle sleeve. has a standard bolt-on pattern for bolting onto a flat surface or one of our cushioned adapters, such as an am-pC-1 or am-pC-2. also am-aC-1 with pa-1 accessories. type ii-25,000 lbs. gross weight. 5,000 lbs. maximum tongue weight. meets Sae standard J-847.
ph-1
pinTle hiTch w/chrome plaTeD 3 ball combination and pintle sleeve for use in a standard 2” receiver hitch. the ph-2 is cushioned and will fit the blind hole receivers as well as the regular open receiver. CuShioNeD. type i-16,000 lbs. gross weight. 800 lbs. maximum tongue weight. meets Sae standard J-847.
ph-2
pinTle hiTch w/sTainless a 3 ball combination ph-2s
pinTle hiTch wiTh 2” ball for use in a standard 2” receiver. ph-3 is non-cushioned and ball not interchangeable
ph-3
Drop or riser. Shank is a 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. with max tongue weight of 2,000 lbs. rated Class 4, v-5 and meets Sae Standard J684. Compatible with reese and Draw tight weight distribution hitches.
am-ac-1
pin hiTch aDapTer. Compatible with ph-1. use 4 grade 5 1/2” x 13 bolts. Be sure they are long enough for mounting purposes. may be used with am-aC-1 with 3 1/2” x 3/4”, grade 5 bolts.
pa-1
pinTle sleeve. Fits Convert-a-Ball pintle hitches only. Does not fit the ph-3 ps
agriculTural clevis hiTch accessory. pintle hitch adapter, fits only Convert-a-Ball ph series hitch bars. maximum weight of 10,000 lbs. maximum tongue weight of 1,000 lbs. Class 4 rated v-5. Not for over the road towing and will not work on a ph-3.
ag-1
pinTles hiTch replacemenT parTs
hanDle assembly ph1-002-000
lock assembly ph1-003-000
hanDle spring kiT ph1-004-999
lock assembly ph2-003-000
safeTy pin kiT ph1-006-000
hiTch pin & safeTy clip am-pin
aDjusTable 4 way cushioneD ball mounT may be used as a drop or riser. the shank is 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives standard hitch pins (not included). maximum trailer weight of 5,000 lbs. maximum tongue weight of 500 lbs. rated class 3. rated v-5. meets Sae standard J-684. will fit the blind hole receivers as well as the regular open receiver.
um
non aDjusTable 4-way cushioneD ball mounT same features as the um only Non-adjustable and includes tongue weight indicator
uD
the pintle pintle™ is a unique solution to the problem of mismatched hitch & trailer couplers. • Simplicity of mounting & towing • high-load capacity designed to meet your towing requirements • priced to fit your budget
specialTy iTems
aTr
sh
aTf
kwik gaTe™ has hundreds of applications, more importantly, it is not in the way when it is in use.
aTvs1 - 1 7/8”aTvs2 - 2”
aTvs3 - 1 7/8”aTvs4 - 2”
HITCH ACCESSORIES
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. qTy. DescripTionDrawbar oem kiTs
83637 1 Dodge magnum hitch, 2,000 lbs. (includes pin and clip)
invisi-hiTch accessories
28451 1 Drawbar Kit, 2,000 lbs. (includes swivel pin)
28351 1 accessory adapter Kit (includes swivel pin)
parT no. DescripTion raTing (lbs.) gTw/Tw lengTh max. rise max. Dropquick release aDjusTable ball mounT (quick release pin anD clip)
6580 Complete Shank and head assembly 6,000/600 12” 6-1/8” 7-3/8”
aDjusTable ball mounT1420 Complete Shank and head assembly 5,000/500 12” 6” 7-1/4”1422 Complete Shank and head assembly 5,000/500 14” 6” 7-1/4”1424 Complete Shank and head assembly 5,000/500 16” 6” 7-1/4”
aDjusTable ball mounT wiTh sway conTrol Tab (plaTform mounTs for lefT or righT hanD)7390 Complete Shank and head assembly 6,000/600 12” 3-3/4” 5-1/4”
all h
itch
balls
bui
lt w
ith w
renc
h fla
ts
inTerchangeable hiTch ball sysTemDesigned to accommodate towing multiple trailers with ease, tow ready interchangeable hitch Ball System allows you to change hitch ball sizes in seconds without any tools. available in 2 and 3-ball sets, these kits feature a quick-release, positive-latch design. available in 3/4” and 1” shank models.
parT no. qTy. DescripTion max gTw (lbs.)replacemenT parTs
63805 1 1-7/8” interchangeable hitch Ball head - 63806 1 2” interchangeable hitch Ball head - 63807 1 2-5/16” interchangeable hitch Ball head - 63808 1 3/4” interchangeable hitch Ball Shank 5,000 63809 1 1” interchangeable hitch Ball Shank 8,000
parT no. qTy. shank ball a ball b ball c max gTw (lbs.)inTerchangeable hiTch ball sysTem
63801 1 Set 3/4” 1-7/8” 2” - 5,00063802 1 Set 1” 1-7/8” 2” - 8,00063804 1 Set 1” - 2” 2-5/16” 8,00063803 1 Set 1” 1-7/8” 2” 2-5/16” 8,000
• innovative quick release changes balls in seconds• rated capacities up to 8,000 lbs.• Durable heat treated shank• New positive latch design• No special tools required
sTep 1: aTTach shank• attach correct shank to drawbar or ball mount• torque to required tightness
sTep 2: aTTach ball• Select the correct ball size for your trailer• place ball on shank
sTep 3: TighTen locking heaD• innovative locking screw requires only 1/4 turn to secure• No need for special tools
you’re Tow reaDy!
63880
63826-006
63851
* ultra Frame or titan receiver and ball mount must be used to achieve 14,000 lbs. rating. Consult tow vehicle owners manual for maximum towing capacities.
• Cold forged for superior strength• when installing hitch balls, torgue all 3/4” shank dia. (B) balls to 160 ft. lbs., 1” shank dia. (B) balls to 250 ft. lbs., and 1-1/4” shank dia (B) balls to 450 ft. lbs.
ball Dia. a
finish
zinc chromeshank Dia. b
shank lengTh c
DrawbarThickness
range
gTw gvwr
raTingbulk hiTch balls *1-7/8” 63811 63810 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” 63813 63812 3/4” 2-3/8” 3/8”-1-3/8” 2,0001-7/8” - 63814 3/4” 3-3/8” 3/8”-2-1/8” 2,0001-7/8” 63817 63816 1” 2-1/8” 3/8”-3/4” 2,0001-7/8” 63819 63818 1” 3-3/8” 3/8”-2-1/8” 2,000
2” 63821 63820 3/4” 1-1/2” 3/8”-5/8” 3,5002” 63823 63822 3/4” 2-3/8” 3/8”-1-3/8” 3,5002” - 63824 3/4” 3-3/8” 3/8”-2-1/8” 3,5002” 63827 63826 1” 2-1/8” 3/8”-3/4” 6,0002” 63829 63828 1” 3-3/8” 3/8”-2-1/8” 6,0002” 63831 63830 1-1/4” 2-3/4” 3/8”-1” 8,000
2-5/16” 63833 63832 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” 63835 63834 1-1/4” 2-3/4” 3/8”-1” 12,0002-5/16” - 63836# 1-1/4” 2-3/4” 3/8”-1” 14,0002-5/16” - 63838# 1-1/4” 2-3/4” 3/8”-1” 17,000
packageD hiTch balls1-7/8” 63881 63880 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” - 63882 3/4” 2-3/8” 3/8”-1-3/8” 2,0001-7/8” 63885 63884 1” 2-1/8” 3/8”-3/4” 2,000
2” 63888 63887 3/4” 1-1/2” 3/8”-5/8” 3,5002” - 63889 3/4” 2-3/8” 3/8”-1-3/8” 3,5002” 63892 63891 1” 2-1/8” 3/8”-3/4” 6,000
2-5/16” 63895 63894 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” 63897 63896 1-1/4” 2-3/4” 3/8”-1” 12,000
packageD hiTch balls (6 pack reTail Display)1-7/8” - 63810-006 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” - 63816-006 1” 2-1/8” 3/8”-3/4” 2,000
2” - 63826-006 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” - 63832-006 1” 2-1/8” 3/8”-3/4” 6,000
packageD sTainless sTeel hiTch balls1-7/8” Stainless
SteelFinish
63851 1” 2-1/8” 3/8”-3/4” 2,0002” 63852 1” 2-1/8” 3/8”-3/4” 6,000
2-5/16” 63853 1” 2-1/8” 3/8”-3/4” 6,000
we offer ball mounts and drawbars in three separate styles: straight cut, angle cut and drop cut. refer to the styles below to select the mount that best suits your needs.
3590 35943593
36051 36063 36071
83637
28351
28451
Drawbar Types
HITCH ACCESSORIES
Drop Not availaBle
™
B
parT no. raTing (lbs.) gTw/Tw ball hole size a lengTh b rise c Drop sTyle3590 2,000/200 3/4” 6-5/8” 5/8” N/a 13591 2,000/200 3/4” 9-3/4” 5/8” N/a 13592 2,000/200 3/4” 9-3/4” 2-1/8” 2-3/4” 23593 2,000/200 3/4” 6-5/8” 2-1/8” 2-3/4” 33594 2,000/200 3/4” 10” 4” N/a 2
• Boxs includes drawbar, pin and clip• Black powder coat finish
• Boxs includes drawbar, pin and clip• Black powder coat finish
Note: Class i drawbar applications are specific. the correct replacement drawbar part number is listed on each
Class i hitch installation instruction sheet.
class i Drawbar kiTs
class ii Drawbar kiTs parT no. raTing (lbs.) gTw/Tw ball hole size a lengTh b rise c Drop sTyle
36051 3,500/300 3/4” 7” 5/8” 1-1/4” 136053 3,500/300 3/4” 9-3/4” 5/8” 1-1/4” 136061 3,500/300 3/4” 9-3/4” 3-1/8” N/a 236063 3,500/300 3/4” 11-3/4” 3-1/8” N/a 236065 3,500/300 3/4” 10” 5” N/a 236071 3,500/300 3/4” 7-3/16” 2-5/8” 3-1/4” 336078* 3,500/300 3/4” 7-3/8” - 4-3/4” 3
* Fits 1-1/4” oem Ford explorer, lincoln aviator & mercury mountaineer hitchNote: Class ii drawbar applications are specific. the correct replacement drawbar part number is listed on each Class ii hitch installation instruction sheet.
STYLE 1 STYLE 2 STYLE 3
specialTy ball mounTs
65801420
1422
1424
7390
• Shank can be used in rise or drop position • Black powder coat finishNote: hitch ball, pin (55010) and clip (55515) sold separately. Not interchangeable with weight distribution replacement parts
adjustable ball mounts are perfect for those who tow multiple trailers of varying coupler heights.
solid steel hitch balls engineered to meet all safetyrequirements of vesc regulation v-5
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. qTy. DescripTionhiTch ball wrench
62342 1
hitch Ball wrench, boxed end 1-1/8” & 1-1/2”
ball mounTs
ball mounTs
selecTing The proper ball mounT: ball mounT measuremenTsrise
Distance from the top of the shank to the
top of the ball platform
rise
DropDistance from the top of the shank to the top
of the ball platform
drop
oNe wreNCh tiGhteNiNG SyStem interlock™ balls and ball mounts act as a “one wrench tightening System” when used together. Standard hitch balls and ball mounts may also be used with interlock™ products but require two wrenches for installation.
when installing interlock• ™ hitch balls, torque all 1” shank balls to 250 ft. lbs.
interlock• ™ solid steel hitch balls are engineered to meet all safety requirements of veSC regulation v-5.
inTerlock™ hiTch balls & ball mounTs
no more scraTcheD or marreD hiTch balls
62342
62342
40792
63842
62807
parT no.
bulk parT no.
raTing (lbs.) gTw/Tw
ball hole size
a lengTh
b rise
c Drop sTyle
max frame mounT kiTs - class iii/iv (2” ball mounT)2923 - 6,000/600 1” 8-1/2 3/4” 2” 22953 - 6,000/600 1” 9” 2-3/4” 4” 2
easy loaD ball mounTs (2” x 2” shank & angle cuT Design)*40342 40342-006 6,000/600 1” 8-1/2” 3/4” 2” 2*40343 40343-006 6,000/600 1“ 10-1/2” 3/4” 2” 2*40344 40344-006 6,000/600 1” 9” 2-3/4” 4” 2*40345 40345-006 6,000/600 1” 11” 2-3/4” 4” 2*40346 40346-002 6,000/600 1” 9-3/4” 4-3/4” 6” 2
uTiliTy ball mounTs (2” ball mounT & bulk boxeD)*2736 2736-006 5,000/500 1” 12” 3/4” 2” 1*2793 2793-002 5,000/500 1” 10” 6-3/4” 8” 3*2706 - 3,500/350 1” 9” 9-3/4” - 3
- - 5,000/500 1” 9” - 11
packageD angleD cuT ball mounTs (2” ball mounT)40446 - 6.000/600 1” 10-1/2” 3/4” 2” 240445 - 6.000/600 1” 11” 2-3/4” 4” 240446 - 6.000/600 1” 9-3/4” 4-3/4” 6” 2
parT no. raTing (lbs.) gTw/Tw
a lengTh
c Drop
ball size secure
class iii sTanDarD Towing sTarTer kiTs (2-pack)40563-002 6,000/600 8-1/2” 2” 2” pin/Clip40564-002 2,000/600 8-1/2” 2” 1-7/8” pin/Chip40566-002 6,000/600 9” 4” 2” pin/Clip
parT no. DescripTionTowing sTarTer kiTs
40349 towing Starter Kit, 6,000 Gtw rating
parT no.
raTing (lbs.) gTw/Tw
ball hole size
a lengTh
b rise c Drop sTyle
soliD forgeD ball mounTs (black powDer coaT finish)40330 12,000/1,200 1-1/4” 8-1/2” 1” 2” -40331 12,000/1,200 1-1/4” 9-1/4” 3” 4” -40332 12,000/1,200 1-1/4” 10-1/4” 5” 6” -
aluminum soliD forgeD ball mounTs (aluminum finish)40381 8,000/800 1” 9-7/8” 1” 2” -40382 8,000/800 1” 10-5/8” 3” 4” -40383 8,000/800 1” 11-7/8” 5” 6” -40384 6,000/600 1” 10-7/8” 7” 8” -
sTainless sTeel ball mounTs40172 6,000/600 1” 9” 3/4” 2” -40176 6,000/600 1” 9-1/2” 2” 3-1/4” -
class iv ulTra frame hollow shank ball mounTs (black powDer coaT finish)40200 10,000/1,000 1-1/4” 8-1/2” 3/4” 2” 140201 10,000/1,000 1-1/4” 9” 2-3/4” 4” 340202 10,000/1,000 1-1/4” 11-1/4” 2-3/4” 4” 340205 10,000/1,000 1-1/4” 9” - 6” 340206 10,000/1,000 1-1/4” 9” - 8” 3
class iv ulTra frame soliD shank ball mounTs (Durable zinc coaTeD finish)4280 12.000/1,200 1-1/4” 8-1/2” 1” 2” 14284 12,000/1,200 1-1/4” 12” 1” 2” 14081 12,000/1,200 1-1/4” 8-1/2” 3” 4” 34285 12,000/1,200 1-1/4” 12” 3” 4” 34282 12,000/1,200 1-1/4” 9-1/2”” 5” 6” 34283 12,000/1,200 1-1/4” 9-1/2” 7” 8” 3
Note: * piN aND Clip Not iNCluDeD
40342
40443 2923
2736
40172
40176
40330
40331
40332
40381
40382
40384
• Solid one- piece forged construction• 1” thick x 3” wide ball platforms• angled, easy-load design
• 2” receiver opening• Brushed stainless steel ball mount (Draw-tite & reese)• polished stainless steel ball mount (hidden hitch)• resists rust and corrosion• available in 2” and 3-1/4” drops with same angle cut as quick- loading ball mounts
sTyle 3
sTyle 1
42804282
• 2” square solid shanks• 1-7/8” and 2” hitch ball interchangeable hitch ball system• 1” shank• Standard ball mount: 8-1/2” length, 3/4” rise, 2” drop• includes pin and clip• Black powder coat finish
• point of purchase retail display• two kits per display box• 2” square box opening
40349
40563-002
• includes 2” hitch ball• includes receiver lock• Black powder coat finish
Towing sTarTer kiTs
parT no. ball Dia. shank Dia. shank lengTh lifT capaciTy (lbs.)chrome inTerlockTm hiTch balls
62807 1-7/8” 1” 2” Standard 2,000 lbs.62803 2” 1” 2” Standard 6,000 lbs.62806 2-5/16” 1” 2” Standard 6,000 lbs.
sTainless sTeel inTerlockTm hiTch balls63842 1-7/8” 1” 2” Standard 2,000 lbs.63843 2” 1” 2” Standard 6,000 lbs.63844 2-5/16 1” 2” Standard 6,000 lbs.
class iii inTerlockTm ball mounTs40792 1” 9” 2” 3/4” 6,000/60040793 1” 9-1/2” 3-1/4 2” 5,000/50040794 1” 10” 5-1/4 2” 5,000/500
• includes pin and clip• Black powder coat finish
parT no. raTing (lbs.) gTw/Tw a lengTh b rise c Drop secureclass iii inTerlock Towing sTarTer kiTs
40565 6,000/600 8-1/2” 3/4” 2” lock
8041063037
57615762
parT no. DescripTion ball mounT gTw/Tw (lbs.)
clevis mounT gTw/Tw (lbs.) lengTh
clevis mounTs5761 3/4””hole 3,500/350 5,000/350 9-3/4”
5762 1” hole 6,000/600 6,000/600 8-7/8”
80410* 1” hole 6,000/600 6,000/600 11”
6201 1” hole 6,000/600 10,000/1,000 8-7/8”
5763 3/4” dia. - - 4-1/4”
5764 1” dia. - - 4-3/4”
• For use with industrial/ agricultural equipment
* Ball mount has 1-1/4” drop, Clevis has 3” drop
• includes 2” hitch ball, pin & clip
lengThDistance from the center
of the ball hole to the center of the pin hole
length
sTyle 3 Drop cuT:
sTyle 2 angle cuT:
HITCH ACCESSORIES
parT no. qTy. DescripTionclevis & ball mounT combo
63037 1 8-1/2” length, 6,000 Gtw
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
parT no. qTy. DescripTionhiTch ball & ball mounT bags
7627 1 (ball mount not included)6352 1 (ball not included)
Conveniently stores • interchangeable and removable hitch balls when not in use• Features a hook and loop closure to secure ball and keep vehicle clean• Durable nylon design provides years of use
80404
80405
80406
80401
80403
80402
80407
8041580408
80400 80470
7627
6352
parT no. DescripTion raTing (lbs.) gTw/Tw shank lengTh ball size rise or Drop2-ball hollow shank
80404 2-Ball Ball mount, Black hollow Shank
2,000/200 6,000/600 - 1-7/8” 2” rise
Drop
80405 2-Ball Ball mount, Black hollow Shank
2,000/200 6,000/600 - 1-7/8” 2” Drop
rise
80406 2-Ball Ball mount, Black hollow Shank
6,000/600 6,000/600 - 2”
2-5/16”Droprise
2-ball soliD shank
80401 2-Ball Ball mount, Black Solid Shank
2,000/200 6,000/600
8”8”
1-7/8”2” -
80402 2-Ball Ball mount, Chrome Balls, Black, Solid Shank
6,000/60010,000/1,000
8”8”
2”2-5/16” -
80403 2-Ball Ball mount, Black Solid Shank
2,000/600 6,000/600
8”8”
1-7/8”2” -
80407 2-Ball Ball mount, Chrome Balls, Black, Solid Shank
6,000/60010,000/1,000
8”8”
2”2-5/16” -
3-ball soliD shank
80408 3-Ball Ball mount Black Solid Shank & Balls
2,000/2006,000/600
10,000/1,000
8”8”
6-3/4”
1-7/8”2”
2-5/16”-
80415 3-Ball Ball mount, Chrome Balls, Black Solid Shank
2,000/2006,000/600
10,000/1,000
8”8”
6-3/4”
1-7/8”2”
2-5/16”-
reversible ball mounTs
hiTch accessories
parT no. qTy. DescripTionbumper guarD, “The hiTch guiDe-anD-sTop”
80400 1 Black80470 1 Diamond plate
parT no. qTy. DescripTionreceiver aDapTers
80300 1 2” to 1-1/4”, 7” long, 3,500 lbs.
80301 1 2” to 1-1/4”, 14” long, 3,500 lbs.
80302 1 2” to 1-1/4”, 18” long, 3,500 lbs.
80303 1 1-1/4” to 2”, 6” long, for Class ll only; 3,500 lbs.
80304 1 1-1/4” to 2”, 6”, 10” long, for Class ll only; 3,500 lbs.
parT no. DescripTion. wc (lbs.) wD (lbs.) lengThreceiver exTensions
80307 receiver extension 3,500 - 8”80305 receiver extension 3,500 - 14”80306 receiver extension 3,500 - 18”
45292 titantm receiver extension
6,0004,500
8,0006,000
24”34”
45018 titantm receiver extension
5,0004,000
7,5006,000
41”48”
protects vehicle from coupler impact while backing up• •mounts to any ball mount with 1” hole•mounting surface must be flat
45292 80306
80300
80301
80303
8030480302
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
• ideal for cargo carriers & bike carriers• Designed to extend the receiver opening from 6” to 18”• use of this adapter reduces hitches’ tow rating by 50% & with a maximum rating of 3,500 lbs towing capacity
ideal for slide-out campers with extended • overhangs• Designed to extend the receiver opening 14”, 18”, 24”, 34”, 41” or 48”• 2” opening for use with standard ball mounts and hitch-mounted accessories• For use with receivers only• integrated electrical bracket attached
allows Class ii balls (3/4” shank) to be used in Class iii • ball mounts (1” hole) - applies to 80100• allows Class iii balls (1” shank) to be used in Class iv ball mounts (1-1/4” hole) - applies to 80106
• weight rating as per ball being used• 2” square hollow shank, rated up to 6,000 lbs. Gtw/600 lbs. tw
pinTle hooks & accessories
63013630146301563016
630106301163012
63020
630176301863019
63032
63056 63057
63058
63059
parT no. shank raTing (lbs.) gTw/Tw
shank lengTha b
shank Dia. / h
heighTc
wiDThD
holee
wiDTh f
heighTg
holeseTs
receiver exTensions63056 hollow 6,000/600 7-5/8” 3” 2” 5-1/2” 5” 17/32” 3-3/8” 1-3/4” 363057 Solid 12,000/1,200 7-5/8” 3-1/4” 2” 7-1/2” 5” 17/32” 3-3/8” 1-3/4” 463058 Solid 8,000/800 11-3/8” 3-1/4” 2” 12-1/2” 5” 17/32” 3-3/8” 1-3/4” 763059 Solid 12,000/1,200 11-3/8” 3-1/4” 2” 7-1/2” 5” 17/32” 3-3/8” 1-3/4” 445156* hollow 12,000/1,200 7-3/4” 3-1/4” 2-1/2” 6” 5” 17/32” 3-3/8” 1-3/4” 3
Converts receivers • for use with pintle- type trailers, quickly and easily• provides mounting for both ball and pintle and rigid type pintle hooks• pin and clip must be ordered separately
*titan pintle hook adapter mount
parT no. qTy. DescripTionpinTle hooks (incluDes mounTing harDware)
63013 1 5 ton, 2,000 lbs. max. vertical load, 10,000 lbs. Gtw63014 1 10 ton, 4,000 lbs. max. vertical load, 20,000 lbs. Gtw63015 1 15 ton, 6,000 lbs. max. vertical load, 30,000 lbs. Gtw63016 1 30 ton, 14,000 lbs. max. vertical load, 60,000 lbs. Gtw63032 1 replacement hardware mounting Kit
pinTle hook combinaTion hiTches (incluDes mounTing harDware)
63010 1 1-7/8” Combo hitch, 16,000 lbs. Gtw, ball rating 6,000 lbs.63011 1 2” Combo hitch, 16,000 lbs. Gtw, ball rating 10,000 lbs.63012 1 2-5/16” Combo hitch, 16,000 lbs. Gtw, ball rating 14,000 lbs.63032 1 replacement hardware mounting Kit
replacemenT parTs63017 1 1-7/8”” replacement Ball, 6,000 lbs., 1-1/4” diameter 63018 1 2” replacement Ball, 10,000 lbs., 1-1/4’ diameter63018 1 2-5/16” replacement Ball, 14,000 lbs., 1-1/4” diameter63020 1 replacement Snapper pin43031 1 5/16” Safety pin63032 1 replacement hardware mounting kit
parT no. qTy. DescripTion
28023 1 lunette ring lock (fits 2-1/2” & 3” diameter lunette rings)
4210 1 lunette ring lock
63023 1 lunette ring, 2-1/2” diameter with 4 hole base 42,000 lbs. Gtw
63033 1 hardware mounting Kit for 63023
63022 1 lunette ring, 2-1/2” diameter with 1-1/2” shank 15,000 lbs. Gtw
63021 1 adjustable lunette ring, 3” diam-eter w/channel 12,000 lbs. Gtw
parT no. qTy. DescripTionreDucer bushing
80100 1 1” oD to 3/4” iD80106 1 1-1/4” oD to 1” iD
63023
63022
28023
63021
luneTTe rings
HITCH ACCESSORIES
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
53515352
194401944-010
5363 701007010-0247050
5362
678806788-0101202
01202-0245363
2211
5330
4011340114
6430
6431
6430
6435
6432
6434
6433
6429
attractive point-of-purchase packaging• Foam gasket included for exact fit• heavy chrome face features popular oem manufacturer logos • oem licensed
63041
6304663047
6304563043
sTabilizing pin wiTh lockmore than just a hitch pin, J-pin® quickly and confidently secures ball mounts and other hitch-mounted accessories, eliminating the sway and rattle caused by part clearance issues.J-pin® ready receiver design allows for the most confident and secure hookup in today’s towing market by compressing the hitch-mounted accessory against the inner side wall of the hitch receiver tube. once attached, the hitch and towing components seem virtually welded together. packaged complete with its integral ball mount lock, J-pin® makes your towing system complete.
insert J-pin® through large hole in receiver hitch
tighten nut on J-pin® shaft, compressing ball mount or hitch-mounted accessory
against receiver tube
Secure ball mount or hitch-mounted accessory
with locking head
06237
63201
55010
63240
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
pins and clips are included with all class i and ii hitches.
Tube covers
pins, clips & j-pin® pins, clips & j-pin®
hiTch locks
63223
63211
63212
63215
63205
63235 63237
trailer Guardian locks• helps prevent accidental decoupling • ability to lock and secure the trailer on the tow vehicle•two piece construction
parT no. qTy. DescripTionlogo receiver Tube covers
6430 1 Draw-tite “D” logo, fits all 2” receivers
6431 1 Chevrolet logo, fits all 2” receivers
6432 1 Dodge ram logo, fits all 2” receivers
6433 1 Ford oval logo, fits all 2” receivers
6434 1 GmC logo, fits all 2” receivers
6435 1 Jeep logo, fits all 2” receivers
6429 1 adapts 6430-6435 tube Covers to 1-1/4” receivers
parT no. qTy. DescripTionsilenT hiTch pin anD lock sysTem
63232 1 Class lll Silent hitch pin
63232
FORMERLY
NEW PRODUCT!
NEW!
UPRATED!
NOW UPRATED!
NEW OFFERING!
eliminates noise associated with hitch accessories rattling against receiver tube. unique design holds drawtube tight inside hitch receiver tube. For use with hollow shank ball mounts only.
j-pin®anTi-raTTle pin w/barrel lockseT
receiver Tube coversparT no. qTy. maTerial color
sporTframe anD frame hiTch, 1-1/4” square receivers:
5354 1 Disp. pkg. metal Chrome
5362 1 Disp. pkg. plastic Black
2211 1 Bulk rubber Black
2” square receivers:1944 1 Disp. pkg. plastic Chrome
01944-010 10 Bulk plastic Chrome
5352 1 Disp. pkg. metal Chrome
1202 1 Disp. pkg. plastic Black
01202-024 24 Bulk plastic Black
5363 1 Disp. pkg. plastic Black
5330 1 Disp. pkg. rubber Black
6788 1 Disp. pkg. rubber Black
06788-010 10 Disp. pkg. rubber Black
7010 1 Bulk rubber Black
07010-024 24 Bulk rubber Black
7050 1 Disp. pkg. rubber Black
specialTy receiver Tube coversparT no. qTy. DescripTion maTerialsporTframe anD frame hiTch, 1-1/4” square receivers:
8895 1 Disp. pkg.
uS Flag receiver tube Cover plastic
40113 1 Disp. pkg.
propeller receiver tube Cover, Chrome look plastic
2” square receivers:
8896 1 Disp. pkg.
uS Flag receiver tube Cover plastic
40114 1 Disp. pkg.
propeller receiver tube Cover, Chrome look plastic
parT no. qTy. DescripTionswivel pins (packageD)
63202 1 1/2” integral pin & Clip, stainless
63203 1 5/8” integral pin & Clip, stainless
63204 1 1/2” integral pin & Clip, zinc
63205 1 5/8” integral pin & Clip, zinc
hiTch locks wiTh 1/2” DiameTer63211 1 Stainless Steel lock for 1-1/4” receivers
63214 1 Deadbolt pro-tech lock for 1-1/4” receivers
63216 1 Deadbolt lock for 1-1/4” receivers
63224 1 Bent pin Deadbolt lock for 1-1/4” receivers
63234 1 universal hitch lock w/Sleeve for 1-1/4”, 2”, & 2-1/2” rec.
hiTch locks wiTh 5/8’ DiameTer63212 1 Stainless Steel lock for 2” rec.
63215 1 Deadbolt pro-tech lock for 2” rec.
63217 1 Deadbolt lock for 2” rec.
63223 1 Bent pin Deadbolt lock for 2” or 2-1/2” rec.
63231 1 Bent pin lock w/barrel body for 2” or 2-1/2” rec.
63234 1 universal hitch lock w/Sleeve for 1-1/4”, 2” & 2-1/2” rec.
parT no. qTy. DescripTion max gTw ball gTw max vlone-piece pinTle hook
63043 1 5-ton receiver mount 10,000 - 2,000
one-piece pinTle combinaTions63040 1 1-7/8” receiver mount 12,000 2,000 2,400
63041 1 2” receiver mount 12,000 7,000 2,400
63042 1 2-5/16” receiver mount 12,000 12,000 2,400
receiver mounT Tow eyeleT63045 1 Forged receiver mount tow eyelet, 10,000 lbs. Gtw, 7-3/4” length
receiver mounT Tow hooks63044 1 Forged receiver mount tow hook, 10,000 lbs. Gtw, 7-3/4” length
63047 1 receiver mount tow hook, 8,000 lbs. Gtw, 7” length
receiver mounT Tow ring63046 1 receiver mount tow ring, 8,000 lbs. Gtw, 7-3/8” length
parT no. qTy. DescripTionpins & clips
63241 1 pkg. Class l/ll pin & Clip, 1/2”, groove style
63241-050 50 Class l/ll pin & Clip, 1/2”, groove style (50-pk)
63240 1 pkg. Class lll/lv pin & Clip, 5/8”, groove style
63240-050 50 Class lll/lv pin & Clip, 5/8”, groove style (50-pk)
63242 1 pkg. Class lll/lv pin & Clip, 5/8”, hole style
63242-050 50 Class lll/lv pin & Clip, 5/8”, groove style (50-pk)
63242-100 100 Class lll/lv pin & Clip, 5/8”, groove style (100-pk)
63242-500 500 Class lll/lv pin & Clip, 5/8”, hole style (500-pk)
63243 1 pkg. Class v pin & Clip, 5/8”, hole style
63243-050 50 Class v pin & Clip, 5/8”, groove style (50-pk)
06237 1 Class l/lv pin & Clip, 1/2”, groove style
06237-050 50 Class l/lv pin & Clip, 1/2”, groove style (50-pk)
55010 1 Class lll/lv pin & Clip, 5/8”, groove style
55010-050 50 Class lll/lv pin & Clip, 5/8”, groove style (50-pk)
55515 1 Bulk Clip
55515-050 50 Bulk Clip (50-pk)
HITCH ACCESSORIESHITCH LOCKS
parT no. qTy. DescripTion
combo locks (hiTch anD Trailer)
63235 1 Single arm lock for 2-1/2” wide Ball mnt. platform w/1” Ball hole
63236 1 Dual arm lock for 2-1/2” wide Ball mnt. platform w/1” Ball hole
63237 1 Single arm lock for 3” wide Ball mnt. platform w/1” Ball hole
63237 1 Dual arm lock for 3” wide Ball mnt. platform w/1” Ball hole
63044
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
chrome/sTainless balls anD shanksDescripTion raTing parT no. parT no.chrome balls & shanks3/4” long Forged 5,000 ibs. 103* 103b*3/4” reg. Shank 3,500 ibs. 100* 100b*3/4” long Shank 3,500 ibs. 101* 101b*1” reg. Shanks 10,000 ibs. 102 102b1” extra long Shank 10,000 ibs. 105 105b1 7/8” Ball 300 300b2” Ball 400 400b2 5/16” Ball 600 600bSet: 3/4” reg. Shank, 1 7/8”& 2” Balls 3,500 ibs. 700* 700b*Set: 3/4” long Shank, 1 7/8” & 2” Balls 3,500 ibs. 800* 800b*Set: 1” reg. Shank, 1 7/8” 2” & 2 5/16” Balls 10,000 ibs. 900 900bSet: 1” reg. Shank, 1-7/8” & 2” Balls 10,000 ibs. 901 901bSet: 1” reg. Shank, 2” & 2-5/16” Balls 10,000 ibs. 904 904bSet: 1” Super long Shank, 1-7/8” & 2” Balls 10,000 ibs. 105l 105lbSet: Super long 1-7/8” & 2” and 2-5/16” Balls 10,000 ibs. 105T 105TbSet: 3/4” Forged Shank, 1-7/8” & 2” Balls 5,000 ibs. 801* 801b*
*2-5/16” Ball will not fit on 3/4” Shank • rated Class 4. rated v-5. meets Sae Standard J-684“B” packaged product
DescripTion raTing parT no. parT no.
sTainless sTeel balls & shanks3/4 “ long Shank 5,000 iBS 104* 104b*1” reg. Shank 10,000 iBS 106 106b1” extra long Shank 10,000 iBS 107 107b1-7/8” Ball 301 301b2” Ball 401 401b2-5/16” Ball* 601 601bSet: 3/4” long Shank, 1-7/8” & 2” Balls 5,000 lBS 802* 802b*Set: 1” reg. Shank, 1-7/8” 2” & 2-5/16” Balls 10,000 lBS 902 902b Set: 1” reg. Shank, 1-7/8” & 2” Balls 10,000 lBS 903 903b Set: 1” reg. Shank, 2” & 2-5/16” Balls 10,000 lBS 906 906b Set: 1” Super long Shank, 1-7/8”, 2” & 2-5/16” Balls 10,000 lBS 107T 107Tb Set: 1” Super long Shank, 1-7/8”& 2” Balls 10,000 lBS 107l 107lb
*2-5/16” Ball will not fit on 3/4” Shank • rated Class 4. rated v-5. meets Sae Standard J-684“B” packaged product
100
DeSCriptioN parT no. parT no.sTorage / accessories2-ball rack used to store balls. Balls are not included. 002 002b3-ball rack used to store balls. Balls are not included. 003 003b3-ball plastic box used to store and protect balls with cover. Colors: Grey or tan.Balls are not included. 004 004b
Shank cover in red, black or grey. 005 005bwood display with pieces. included: 3/4” reg., 3/4” long and 1” stand. Shanks: 1-7/8,” 2” and 2-5/16” chrome balls. Db6
“B” packaged product
ball mounTs 5Th wheel To
gooseneck aDapTers
afTermarkeTpinTle couplers
101 102 105
2 5/16”2”1 7/8”
1 3/4”2 1/4”
2 1/4” 3”
003
004
0058
D86
am-sc series• acts as a shock absorber• protects the towing vehicle’s
driveline, hitch assembly and trailer contents.
• easy to install. • proven effective in reducing
bounce and rhythmic vibrations. • For use with underframe receiver
hitch with a 2” square socket. • Class 4, v-5 SaFe!
cushioneD roll-a-hiTch. telescoping Cushioned hitch extends 7” beyond towing position and swivels 12” left and right for fast, easy hookups anywhere. Just pull forward to lock in center and then back up to lock in towing position. max trailer weight 10,000 lbs and maximum tongue weight 1000 lbs. per Sae J-684 v-5. hitch pins included.
cushioneD Tow-hookCushioned and chromed, the new Cushioned tow- hook is a versatile work horse. round out your product line with the Cushioned tow-hook... hundreds of agricultural, industrial and recreational uses.
lo 6 1/4” Droplr2 4 1/4” Droplr4 2 1/4” Drop
am-sc-2
am-sc-6
am-sc-8
am-sc-4
cushioneD new all casT boDy – 20,000 lb. raTeD cushioneD 360º• Safety chains standard• Fail safe king pin adapter• locks with padlock• available in 12” and 16” sizes with welded body
rh
5gx
cushioneD gooseneck30,000 lb. raTeD• 4” round pipe• Same cushioning system as C5G
non-cushioneD 7 1/2” offseT
non-cushioneD gooseneck wiTh 7 1/2” offseT
gx
cg
am-pc series is compatible with ph-1. Fits several aftermarket mounts as well. may be used as drops and risers. Shanks are 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives standard hitch pins (not included). use 4 grade 5 1/2” bolts. Be sure they are long enough for mounting purposes. maximum trailer weight of 10,000 lbs. maximum tongue weight of 2,000 lbs.
am-sc-4aDjusTable
am-sc-4aDjusTable
am-pc-1non
aDjusTable
hauling maDeeasier anD safer Slack Sack™ stores excess webbing in the bag with the ratchet strap at all times, while in use or in storage. made of durable, water resistant nylon pack cloth.
chain Tugger™ binDer takes up to 20” of slack without disconnecting the chain. 36” total length, hook to hook. Breaking limit of 10,000 lbs. working load limit 3,335 lbs.
lb201
HITCH ACCESSORIES
WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS
swinger hiTchthe 00106 Swinger hitch is cushioned! acts as a shock absorber, reducing bounce and rhythmic vibrations. 7” right and 7” left for easy hook up. available in a 2” rise, 0” drop and 4” drop. maximum trailer weight of 7,500 lbs. maximum tongue weight of 1000 lbs. rated v-5. meets Sae standard J-684. manufacturer’s lifetime warranty for materials and workmanship. Fair wear and tear excluded.
rear aTv universalCan be used as a 3-way if unit is fastened on with a 3/4” shank, standard trailer ball. a clevis type trailer can be towed by pinning the hitch through the big hole. large grommeted hole is for ropes/hooks.
Kit PN Make/Model
5432 03-07 Dodge Ram except Sport
6084 03-08 Hummer H2
5298 07-08 Toyota FJ Cruiser
4080 03-06 Chevrolet Silverado 07 Classic only
5452 07-08 Toyota Tundra
Upgrade or Add PIAA Quality lights with Complete Lamp Kits with Custom Brackets.
LAMP KITS
Toyota Tundra Kit
Ford Super Duty Kit
Dodge Ram Kit
Upgrade factory lights!
MOUNTING KITS
Kit PN Make/Model Application
30360 05-07 Ford Super Duty Mounts PIAA 410 (PN 4152) in factory location.
For more information see www.piaa.com
Toyota FJ Cruiser Kit
Hummer Kit
GMC Sierra Kit
afTermarkeTaDjusTable couplers
pinTle pinTle™
DescripTion parT no.
am-ac series & accessories
Drop or riser. Shank is a 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. with max tongue weight of 2,000 lbs. rated Class 4, v-5 and meets Sae Standard J684. Compatible with reese and Draw tight weight distribution hitches.
am-ac-1
ball mounT aDapTer. may be used with the amaC-1 with 3 1/2” x 3/4” 16-gauge 5 bolts ba-1
clevis pin aDapTer. Designed as an agricultural clevis hitch and may also be used as a ball mount. Shank hole is 1” diameter. may be used with am-aC-1 with 3 1/2” x 3/4”, grade 5 bolts.
ca-1
pin hiTch aDapTer. Compatible with ph-1. use 4 grade 5 1/2” x 13 bolts. Be sure they are long enough for mounting purposes. may be used with am-aC-1 with 3 1/2” x 3/4”, grade 5 bolts.
pa-1
am-cc series are designed as aG hitches. Shanks are 2” x 2” tube with 1/4” wall thickness. Shank hole diameter is 1”. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. and maximum tongue weight of 1000 lbs. rated class 4. rated v-5. meets Sae standard J-684. For use with open-end receivers.
am-cc-1
am-cc series may be used as ball mounts but are designed as aG hitches. Shanks are 2” x 2” tube with 1/4” wall thickness. Shank hole diameter is 1”. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. and maximum tongue weight of 1000 lbs. rated class 4. rated v-5. meets Sae standard J-684. For use with open-end receivers.
am-cc-2
DescripTion parT no.
pinTles & accessories
bolT on pinTle hiTch w/sTainless sTeel 3 ball combination and pintle sleeve. has a standard bolt-on pattern for bolting onto a flat surface or one of our cushioned adapters, such as an am-pC-1 or am-pC-2. also am-aC-1 with pa-1 accessories. type ii-25,000 lbs. gross weight. 5,000 lbs. maximum tongue weight. meets Sae standard J-847.
ph-1
pinTle hiTch w/chrome plaTeD 3 ball combination and pintle sleeve for use in a standard 2” receiver hitch. the ph-2 is cushioned and will fit the blind hole receivers as well as the regular open receiver. CuShioNeD. type i-16,000 lbs. gross weight. 800 lbs. maximum tongue weight. meets Sae standard J-847.
ph-2
pinTle hiTch w/sTainless a 3 ball combination ph-2s
pinTle hiTch wiTh 2” ball for use in a standard 2” receiver. ph-3 is non-cushioned and ball not interchangeable
ph-3
Drop or riser. Shank is a 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives a standard 5/8” hitch pin. maximum trailer weight of 10,000 lbs. with max tongue weight of 2,000 lbs. rated Class 4, v-5 and meets Sae Standard J684. Compatible with reese and Draw tight weight distribution hitches.
am-ac-1
pin hiTch aDapTer. Compatible with ph-1. use 4 grade 5 1/2” x 13 bolts. Be sure they are long enough for mounting purposes. may be used with am-aC-1 with 3 1/2” x 3/4”, grade 5 bolts.
pa-1
pinTle sleeve. Fits Convert-a-Ball pintle hitches only. Does not fit the ph-3 ps
agriculTural clevis hiTch accessory. pintle hitch adapter, fits only Convert-a-Ball ph series hitch bars. maximum weight of 10,000 lbs. maximum tongue weight of 1,000 lbs. Class 4 rated v-5. Not for over the road towing and will not work on a ph-3.
ag-1
pinTles hiTch replacemenT parTs
hanDle assembly ph1-002-000
lock assembly ph1-003-000
hanDle spring kiT ph1-004-999
lock assembly ph2-003-000
safeTy pin kiT ph1-006-000
hiTch pin & safeTy clip am-pin
aDjusTable 4 way cushioneD ball mounT may be used as a drop or riser. the shank is 2” x 2” tube with 1/4” wall thickness. hitch pin hole receives standard hitch pins (not included). maximum trailer weight of 5,000 lbs. maximum tongue weight of 500 lbs. rated class 3. rated v-5. meets Sae standard J-684. will fit the blind hole receivers as well as the regular open receiver.
um
non aDjusTable 4-way cushioneD ball mounT same features as the um only Non-adjustable and includes tongue weight indicator
uD
the pintle pintle™ is a unique solution to the problem of mismatched hitch & trailer couplers. • Simplicity of mounting & towing • high-load capacity designed to meet your towing requirements • priced to fit your budget
specialTy iTems
aTr
sh
aTf
kwik gaTe™ has hundreds of applications, more importantly, it is not in the way when it is in use.
aTvs1 - 1 7/8”aTvs2 - 2”
aTvs3 - 1 7/8”aTvs4 - 2”
HITCH ACCESSORIES