CATALOGUE
TY Valve Italy ball valves
1
Our quality certifications . . . . . . . . . . . . . . . . . . . . . . . . .
Ball valves: Design - Applications - Materials . . . . . . . . . . .
Reference Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trunnion mounted ball valves . . . . . . . . . . . . . . . . . . . . . .
Wellhead ball valves . . . . . . . . . . . . . . . . . . . . . . . . . .
Floating ball valves . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard materials . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service and maintenance - testing . . . . . . . . . . . . . . . . . .
CATALOGUEINDEX
Edition: 2011
p. 2
p. 5
p. 6
p. 7
p. 8
p. 33
p. 34
p. 40
p. 41
p. 42
TY Valve Italy ball valves
2
TY Valve Italy ball valves
3
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
OUR MISSIONOUR MISSIONCustom engineered valves for the Oil & Gas Market
TY Valve Italy is a new company founded in Italy byprofessionel people with a broad experience in valve designand manufacturing.We are supplying Valve for Upstream and Downstream Oil &gas Market in accordance with highest quality standards.
High Quality Italian DesignSevere Service ApplicationsConcentrated Production LotsShort Lead TimesDirect Customer Service
24
The scope of this license includes the following product: Valves at PSL 1 through 4
QMS Exclusions: No Exclusions Identified as Applicable
TY VALVE ITALY S.R.L. Via Kennedy, 9
Cerro Maggiore, MI Italy
6A-1252
6A-1252
API Spec 6A
Effective Date: APRIL 25, 2011 Expiration Date: APRIL 25, 2014
The scope of this license includes the following product: Ball Valves
QMS Exclusions: No Exclusions Identified as Applicable
TY VALVE ITALY S.R.L. Via Kennedy, 9
Cerro Maggiore, MI Italy
6D-1170
6D-1170
API Spec 6D
Effective Date: APRIL 25, 2011 Expiration Date: APRIL 25, 2014
5
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
BALL VALVESBALL VALVES
DESIGN FEATURES•Anti Blow out Stem•Antistatic Design•Fire safe design•Soft seated or Metal Seated•Low Fugitive Emission design•Double Block And Bleed•Welded or Bolted body•Double Piston Effect or Self relieving Seats•Extended stem•Cryogenic Design
MATERIALS•Carbon Steel•Stainles Steel•Duplex SS•Nickel Alloys•Titanium•Exotic Alloys
SEVERE SERVICE DESIGN•Corrosive Fluids•Erosive (Slurry)•High Temperature•Cryogenic•Underground•And.. any special requirement from ourcustomers!
3
Anti Blow-Out StemAntistatic DeviceFire Safe DesignSoft Seated or Metal SeatedLow Fugitive EmissionDouble Block and BleedWelded or Bolted BodySelf Relieving Seats or Double Piston EffectExtended StemCryogenic Extended Bonnet
SEVERE APPLICATIONS Corrosive Erosive High Temperature Cryogenic Underground Subsea Other Special Requirements
MATERIALS Carbon Steel LT Carbon Steel, Impact Tested Ferritic/Austenitic Stainless Steel (Duplex - Super Duplex) Austenitic Stainless Steel Austenitic Stainless Steel (6Mo) Hardened Stainless Steel - Precipitation Martensitic Stainless Steel High Strength Low Alloyed Steel Non-Ferrous Steel, Nickel Alloy Titanium Exotic Materials
DESIGN FEATURES
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
API Q1 - ISO TS 29001 Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry,
API 6A - ISO 10423 Drilling and production equipment. Wellhead and Christmas tree equipment
API 6DSS – ISO 14723 specification on Subsea Pipeline Valves
API 17D – Specification for Subsea Wellhead and christmas trees equipements
API 6D – ISO 14313 Specification for Pipeline Valves
API 598 - Valve Inspection and Testing
API 607 - ISO 10497 Testing of valves - Fire type-testing requirements
API 6FA Specification for Fire Test for Valves
API 608 Metal Ball Valves - Flanged and Butt-Welding Ends
ASME Boiler and Pressure Vessel Code, Sect. VIII Div.1 & 2
ASME B1.1 Unified Inch Screw Threads, UN and UNR Thread Form
ASEM B1.20.1 Pipe Threads, General Purpose (Inch)
ASME B1.5 ACME Screw Threads
ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves
ASME B16.20 Metallic Gaskets for Pipe Flanges - Ring-Joint, Spiral-Wound, and Jacketed
ASME B16.25 Butt-welded Ends
ASME B16.34 Valves Flanged, Threaded, and Butt-welded End
ASME B16.47 Large Diameter Steel Flanges - (NPS 26 Through NPS 60)
ASME B16.5 Pipe Flanges and Flanged Fittings - (NPS ½ Through NPS 24)
ASME B31.3 Process Piping
ASME B31.8 Gas Transmission and distribution Piping System
ASME B36.10 Welded and Seamless Wrought Steel Pipe
BS 5351 Specification for steel ball valves for the petroleum, petrochemical and allied industries
BS 6364 Specification for valves for cryogenic service
BS 6755 Part1 Testing of Valves - Part 1: Specification for Production Pressure Testing
BS 6755 Part 2 Testing of valves. Specification for fire type-testing requirements
BS EN 12266 Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria.
EN 10204 Metallic products - Types of inspection documents
EN 473 / ISO 9712 Non-destructive testing. Qualification and certification of NDT personnel. General principles
EN 14141 Valves for natural gas transportation in pipelines - Performance requirements and tests
ISO 17292 Metal ball valves for petroleum, petrochemical and allied industries
ISO 15848 ndustrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1 & 2
ISO 5208 Industrial valves -- Pressure testing of valves
ISO 9001 Quality management systems -- Requirements
MSS SP-06 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
MSS SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions
MSS-SP-44 Steel Pipeline Flanges
MSS-SP-45 Bypass and Drain Connections
MSS-SP-55 Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other
NACE MR0175 - ISO 15156Petroleum and Natural Gas Industries - Materials for Use in H2S-containingEnvironments in Oil and Gas Production - Parts 1, 2 and 3
ASTM Material Specification
PED (97/23/CE) Pressure Equipment Directive
Atex (94/9/CE) Explosives Atmospheres Directive
REFERENCE STANDARDSREFERENCE STANDARDS
46
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
API Q1 Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
ISO TS 29001 Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems -Requirements for product and service supply organizations
API 6A (ISO 10423) Specification for Wellhead and Christmas Tree Equipment
API 17D Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment
API 6D (ISO 14313) Specification for Pipeline Valves
API 6DSS (ISO 14723) Specification for Subsea Pipeline Valves
API 598 Valve Inspection and Testing
API 607 Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
API 608 Metal Ball Valves-Flanged, Threaded and Welding Ends
API 6FA Specification for Fire Test for Valves
ASME Boiler and Pressure Vessel Code, Sect. VIII Div.1 & 2
ASME B1.1 Unified Inch Screw Threads, UN and UNR Thread Form
ASEM B1.20.1 Pipe Threads, General Purpose (Inch)
ASME B1.5 ACME Screw Threads
ASME B16.10 Face to Face and End-to-End Dimensions of Valves
ASME B16.20 Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed
ASME B16.25 Buttwelding Ends
ASME B16.34 Valves Flanged, Threaded and Welding End
ASME B16.47 Large Diameter Steel Flanges: NPS 26 Through NPS 60
ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24
ASME B31.3 Process Piping
ASME B31.8 Gas Transmission and Distribution Piping Systems
ASME B36.10 Welded and Seamless Wrought Steel Pipe
BS 6364 Specification for valves for cryogenic service
EN 12266-1 Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements.
EN 12266-2 Industrial valves. Testing of valves. Tests, test procedures and acceptance criteria. Supplementary requirements
EN ISO 17292 Metal ball valves for the petroleum, petrochemical and allied industries
EN 14141 Valves for natural gas transportation in pipelines. Performance requirements and tests
EN 473 / ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel - General principles
ISO 10497 Testing of valves - Fire type-testing requirements
ISO 15848 Industrial valves - Measurement, test and qualification procedures for fugitive emissions. Part 1: Classification system and qualification procedures for type testing of valves. Part 2: Production acceptance test of valves.
ISO 17292 Metal ball valves for petroleum, petrochemical and allied industries
ISO 5208 Industrial valves - Pressure testing of metallic valves
ISO 9001 Quality management systems - Requirements
MSS SP-06 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
MSS SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions
MSS-SP-44 Steel Pipeline Flanges
MSS-SP-45 Bypass and Drain Connections
MSS-SP-55 Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other
NACE MR0175 - ISO 15156 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Parts 1, 2, and 3
NACE MR 0103 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
ASTM Material Specification
PED (97/23/CE) Pressure Equipment Directive
Atex (94/9/CE) Explosives Atmospheres Directive
REFERENCE STANDARDSREFERENCE STANDARDS
6
7
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
PRODUCT RANGEPRODUCT RANGE
FLOATING BALL VALVES•BODY : BOLTED /MONOBLOCK•PORT: FULL BORE / REDUCED BORE•SIZE: ¼ “ 8”•CLASS ASME 150 2500
TRUNNION BALL VALVES API 6D ISO 17292•BODY : BOLTED /WELDED•PORT: FULL BORE / REDUCED BORE•SIZE: 2 “ 60”•CLASS ASME 150 2500
TOP ENTRY BALL VALVES•BODY : BOLTED•PORT: FULL BORE / REDUCED BORE•SIZE: 2 “ 36”•CLASS ASME 150 2500
SUBSEA BALL VALVES•BODY : BOLTED /WELDED•PORT: FULL BORE / REDUCED BORE•SIZE: 2 “ 60”•CLASS ASME 150 2500
WELLHEAD BALL VALVES API 6A•BODY : BOLTED•PORT: FULL BORE / REDUCED BORE•SIZE: 1 13/16 “ – 7 1/16•CLASS API 2000 10000
COMBINATED BALL VALVES – DBB•BODY : BOLTED /MONOBLOCK•PORT: FULL BORE / REDUCED BORE•SIZE: ¼ “ 16”•CLASS ASME 150 2500
5
MODULAR BALL VALVES – DBB
8
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
TRUNNION MOUNTED BALL VAVESTRUNNION MOUNTED BALL VAVES3 PIECES SPLIT BODY (SIZE 6”)3 PIECES SPLIT BODY (SIZE 6”)
ANTI BLOWOU T STEM
ANTI STATICDESIGN
TRUNNIONPLATE DESIGN
FIRE SAFEDESIGN
SEAT EMERCENCYSEALANT INJECTION
(OPTIONAL)
SELF RELIEVING ORDOUBLE PISTON SEATS
LOWF.E.STEMPACKING
SEAT EMERCENCYSEALANT INJECTION
(OPTIONAL)
HIGH TEMPERATUREOR CRYOGENICEXECUTION(OPTIONAL)
LIP SEALS ORO RING BODY
GASKETS
DOUBLE BLOCKAND BLEED
SOFT –SEATED ORMETAL SEATED
CUSTOMIZEDVENT AND DRAIN
6
TRUNNION MOUNTED BALL VAVESTECHNICAL FEATURES
Bi-directional
The valves are designed to block flow in both upstream and downstream directions.
Body Joint Sealing
The double sealing action of O-Ring and Graphite, or Lip-seal and Graphite in all static body joint components ensures Zero leakage and Fire Safe features. Other spe-cial gaskets can be used for special service.
Trunnion Mounted Ball
The Trunnion mounted ball design allows for ease of operation to minimize the operating torque and to re-duce seat seal wear.
The ball is fixed and the seats are floating which allows freedom for the ball to move along the valve axis. The pressure from the fluid pushes the seat against the ball. At low pressure, the seat sealing action is achieved by force of the springs acting on the floating seats.
Anti-Static Device
The Anti-Static Device allows for electrical continuity between all valve components.
Fire Safe
The valves are designed to ensure all functionality in case of fire.
Stem Feature
Valves shall be designed to ensure that the stem does not eject under any internal pressure condition or of the packing gland components and/or valve operator mounting components are removed. The Anti-Blowout
stem permits the replacement of the stem seals with the valve in the fully Open or Closed position. The stem seal integrity is achieved by using special gaskets (PTFE or Graphite Packing, O-Ring, Lip-seal or other design available on request).
Emergency Stem & Seats seals
An emergency sealant injection system is available upon request, which can restore the sealing integrity if damage is caused to sealing surface or gaskets.
Seats Feature
The two independent seats assure the bi-directional tightness of the valve.The floating seats are spring-loaded and are always in contact with the ball to provide an effective seal and even allows for differential pressure. When the pres-sure is simultaneously applied to both sides of the ball in either fully open or fully closed positions, the body cavity is isolated from upstream and downstream sides, allowing the Double Block and Bleed (DBB) feature. Flu-id pressure acting in the body cavity creates a resultant thrust that pushes the seat away from the ball. The seat design permits the automatic relief of any overpressure in the body cavity when the valve is in fully open or fully closed position (Self relieving seats).
Low Emission
Accurate machining of Stem and other sealing surfaces ensure compliance with the most severe pollution-con-trol regulations.
Split Bolted Body - Full Bore
Class 150
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 178 216 191 49 110 120 152 360 26
80 3 203 283 216 74 135 150 191 450 42
100 4 229 305 241 100 165 165 229 550 63
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-155
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
7 9
RF= Raised Face; BW= Clamp
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
Split Bolted Body - Reduced Bore
Class 150
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 178 216 191 38 90 100 152 300 24
80 x 50 3 x 2 203 283 216 49 100 120 191 360 38
100 x 80 4 x 3 229 305 241 74 125 150 228 450 55
150 x 100 6 x 4 394 457 406 100 155 165 279 550 89
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-156
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
9
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
Split Bolted Body - Reduced Bore
Class 150
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 178 216 191 38 90 100 152 300 24
80 x 50 3 x 2 203 283 216 49 100 120 191 360 38
100 x 80 4 x 3 229 305 241 74 125 150 228 450 55
150 x 100 6 x 4 394 457 406 100 155 165 279 550 89
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-156
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
9
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
10
Split Bolted Body - Full Bore
Class 150
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
150 6 394 457 406 150 275 235 285 - 165
200 8 457 521 470 201 325 295 345 - 250
250 10 533 559 546 252 365 335 410 - 385
300 12 610 635 622 303 405 375 485 - 562
350 14 686 762 699 334 415 425 535 - 765
400 16 762 838 775 385 475 465 600 - 1030
450 18 864 914 876 436 490 480 715 - 1420
500 20 914 991 927 487 520 490 840 - 1810
550 22 991 1092 - 538 572 530 930 - 2390
600 24 1067 1143 1080 589 630 580 995 - 3130
650 26 1143 1245 - 633 680 620 1050 - 3710
700 28 1245 1346 - 684 780 640 1130 - 4590
750 30 1295 1397 - 735 830 695 1190 - 5180
800 32 1372 1524 - 779 860 740 1280 - 6650
850 34 1473 1626 - 830 890 770 1350 - 7890
900 36 1524 1727 - 874 930 820 1410 - 8450
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
BODY NUTS
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
BODY SEAL
STEM SEALS
BODY BOLTS
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
T-155TY Figure Number
8
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
11
Split Bolted Body - Reduced Bore
Class 150
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 178 216 191 38 90 100 152 300 24
80 x 50 3 x 2 203 283 216 49 100 120 191 360 38
100 x 80 4 x 3 229 305 241 74 125 150 228 450 55
150 x 100 6 x 4 394 457 406 100 155 165 279 550 89
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-156
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
9
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
12
Split Bolted Body - Reduced Bore
Class 150
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
200x150 8x6 457 521 470 150 315 235 330 - 190
250x200 10x8 533 559 546 201 340 295 390 - 295
300x250 12x10 610 635 622 252 390 335 480 - 470
350x250 14x10 686 762 699 252 405 335 535 - 530
350x300 14x12 686 762 699 303 405 375 535 - 620
400x300 16x12 762 838 775 303 450 375 595 - 705
400x350 16x14 762 838 775 334 450 425 595 - 835
450x400 18x16 864 914 876 385 480 465 635 - 1080
500x400 20x16 914 991 927 385 510 465 700 - 1280
500x450 20x18 914 991 927 436 540 480 700 - 1430
600x500 24x20 1067 1143 1080 487 610 490 815 - 2100
750x600 30x24 1295 1397 - 589 670 580 985 - 3430
900x750 36x30 1524 1727 - 874 740 695 1170 - 6430
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-156
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
10
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
13
Split Bolted Body - Full Bore
Class 300
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 216 216 232 49 110 120 165 360 31
80 3 283 283 298 74 135 150 210 450 54
100 4 305 305 321 100 165 165 254 550 72
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-255
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
11
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
14
Split Bolted Body - Full Bore
Class 300
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
150 6 403 457 419 150 275 235 318 - 187
200 8 502 521 518 201 325 295 381 - 290
250 10 568 559 584 252 365 335 445 - 510
300 12 648 635 664 303 405 375 521 - 740
350 14 762 762 778 334 415 425 584 - 1040
400 16 838 838 854 385 475 465 648 - 1430
450 18 914 914 930 436 490 480 750 - 1720
500 20 991 991 1010 487 520 505 830 - 2250
550 22 1092 1092 1114 538 540 530 915 - 2910
600 24 1143 1143 1165 589 585 600 995 - 3520
650 26 1245 1245 1270 633 610 635 1030 - 4750
700 28 1346 1346 1372 684 695 650 1130 - 5820
750 30 1397 1397 1422 735 750 690 1205 - 6450
800 32 1524 1524 1553 779 790 750 1285 - 8050
850 34 1626 1626 1654 830 830 780 1330 - 9120
900 36 1727 1727 1756 874 850 810 1410 - 10200
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-255
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
12
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
15
Split Bolted Body - Reduced Bore
Class 300
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 216 216 232 38 90 110 165 300 27
80 x 50 3 x 2 283 283 298 49 110 120 210 360 51
100 x 80 4 x 3 305 305 321 74 135 150 254 450 65
150 x 100 6 x 4 403 457 419 100 165 165 318 550 98
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
BODY
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
T-256
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
13
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
16
Split Bolted Body - Reduced Bore
Class 300
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
200x150 8x6 502 521 518 150 280 235 381 - 230
250x200 10x8 568 559 584 201 300 325 445 - 295
300x250 12x10 648 635 664 252 360 335 521 - 620
350x250 14x10 762 762 778 252 360 335 584 - 660
350x300 14x12 762 762 778 303 380 375 584 - 830
400x300 16x12 838 838 854 303 380 375 648 - 990
400x350 16x14 838 838 854 334 435 425 648 - 1150
450x400 18x16 914 914 930 385 475 465 715 - 1650
500x400 20x16 991 991 1010 385 475 465 780 - 1750
500x450 20x18 991 991 1010 436 490 480 780 - 1820
600x500 24x20 1143 1143 1165 487 540 505 920 - 2750
750x600 30x24 1626 1626 1422 589 590 600 1100 - 4520
900x750 36x30 1727 1727 1756 735 700 690 1290 - 8200
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
SEATS
TRUNNION MOUNTED BALL VALVE
TY Figure Number T-256
DESCRIPTION
BODY
LATERAL
BALL
STEM
14
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
17
Split Bolted Body - Full Bore
Class 600
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 292 292 295 49 110 120 165 360 35
80 3 356 356 359 74 135 150 210 450 65
100 4 432 432 435 100 165 165 273 - 94
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-355
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
15
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
18
Split Bolted Body - Full Bore
Class 600
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
150 6 559 559 562 150 290 245 356 - 260
200 8 660 660 664 201 340 310 419 - 490
250 10 787 787 791 252 380 340 508 - 780
300 12 838 838 841 303 420 400 559 - 1010
350 14 889 889 892 334 460 440 603 - 1190
400 16 991 991 994 385 490 475 686 - 1580
450 18 1092 1092 1095 436 520 490 780 - 2120
500 20 1194 1194 1200 487 540 510 870 - 2680
550 22 1295 1295 1305 538 570 950 950 - 3960
600 24 1397 1397 1407 589 590 600 1030 - 5020
650 26 1445 1445 1461 633 630 635 11// - 5890
700 28 1549 1549 1562 684 700 660 1150 - 6850
750 30 1651 1651 1664 735 790 740 1300 - 8450
800 32 1778 1778 1794 779 840 760 1350 - 9780
850 34 1930 1930 1946 830 870 780 1400 - 11450
900 36 2083 2083 2099 874 950 860 1550 - 13480
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-355
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
16
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
19
Split Bolted Body - Reduced Bore
Class 600
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 292 292 295 38 90 100 165 360 30
80 x 50 3 x 2 356 356 359 49 110 110 210 360 60
100 x 80 4 x 3 432 432 435 74 135 135 273 450 88
150 x 100 6 x 4 559 559 562 100 165 165 353 - 165
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-356
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
17
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
20
Split Bolted Body - Reduced Bore
Class 600
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
200x150 8x6 559 559 562 150 300 245 419 - 310
250x200 10x8 787 787 664 201 350 310 508 - 580
300x250 12x10 838 838 791 252 390 340 559 - 830
350x250 14x10 889 889 791 252 390 340 603 - 930
350x300 14x12 889 889 892 303 430 400 603 - 1160
400x300 16x12 991 991 841 303 430 400 686 - 1410
400x350 16x14 991 991 892 334 465 440 686 - 1560
450x400 18x16 1092 1092 994 385 500 475 750 - 1780
500x400 20x16 1194 1194 994 385 500 475 815 - 2040
500x450 20x18 1194 1194 1095 436 525 490 815 - 2390
600x500 24x20 1397 1397 1200 487 550 510 940 - 3280
750x600 28x24 1549 1549 1562 589 600 600 1150 - 5690
750x600 30x24 1651 1651 1664 589 600 600 1150 - 7100
800x650 32x26 1778 1778 1794 633 630 635 1250 8350
900x750 36x30 2083 2083 2099 735 800 740 1320 - 10520
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
TY Figure Number T-356
DESCRIPTION
BODY
LATERAL
BALL
STEM
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
18
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
21
Split Bolted Body - Full Bore
Class 900
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 368 368 371 49 110 135 212 450 60
80 3 381 381 384 74 145 155 241 600 82
100 4 457 457 460 100 170 175 292 - 128
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-455
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
19
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
22
Split Bolted Body - Full Bore
Class 900
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
150 6 610 610 613 150 300 245 381 - 380
200 8 737 737 740 201 350 310 470 - 620
250 10 838 838 841 252 390 345 546 - 1060
300 12 965 965 968 303 440 420 610 - 1610
350 14 1029 1029 1038 322 450 440 640 - 1480
400 16 1130 1130 1140 373 470 460 710 - 2220
450 18 1219 1219 1232 423 500 500 800 - 2940
500 20 1321 1321 1334 471 520 550 890 - 4250
600 24 1549 1549 1568 570 630 630 1060 - 7430
650 26 1651 1651 1673 617 700 650 1190 - 8940
750 30 1880 1880 1902 712 780 740 1310 - 12400
800 32 2032 2032 2054 760 820 790 1360 - 14200
900 36 2286 2286 2315 855 900 850 1550 - 19200
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-455
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
20
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
23
Split Bolted Body - Reduced Bore
Class 900
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 368 368 371 38 90 115 226 360 55
80 x 50 3 x 2 381 381 384 49 110 135 241 450 76
100 x 80 4 x 3 457 457 460 74 135 165 292 600 102
150 x 100 6 x 4 610 610 613 100 165 175 381 - 220
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-456
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
21
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
24
Split Bolted Body - Reduced Bore
Class 900
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
200x150 8x6 737 737 740 150 470 245 390 - 480
250x200 10x8 838 838 841 201 456 310 480 - 710
300x250 12x10 965 965 968 252 610 345 550 - 1210
350x250 14x10 1029 1029 1038 252 640 345 560 - 1260
350x300 14x12 1029 1029 1038 303 640 420 610 - 1650
400x300 16x12 1130 1130 1140 303 710 420 620 - 1780
400x350 16x14 1130 1130 1140 322 710 440 650 - 1760
450x400 18x16 1219 1219 1232 373 800 460 720 - 2480
500x400 20x16 1321 1321 1334 373 860 460 720 - 2940
500x450 20x18 1321 1321 1334 423 860 500 820 - 3260
600x500 24x20 1549 1549 1568 471 1060 550 900 - 5850
750x600 30x24 1880 1880 1902 570 1250 630 1100 - 9400
900x750 36x30 2286 2286 2315 712 1460 740 1350 - 16400
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
TY Figure Number T-456
DESCRIPTION
BODY
LATERAL
BALL
STEM
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
22
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
25
Split Bolted Body - Full Bore
Class 1500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 368 368 371 49 105 125 216 450 60
80 3 470 470 473 74 130 160 267 - 103
100 4 546 546 549 100 160 180 311 - 185
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-555
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
23
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
26
Split Bolted Body - Full Bore
Class 1500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
150 6 705 705 711 144 340 325 394 - 489
200 8 832 832 841 192 380 365 483 - 850
250 10 991 991 1000 239 450 430 584 - 1540
300 12 1130 1130 1146 287 540 535 673 - 2320
350 14 1257 1257 1276 315 560 550 750 - 2650
400 16 1384 1384 1407 360 590 580 830 - 3890
450 18 1537 1537 1559 406 630 600 950 - 6040
500 20 1664 1664 1686 454 680 640 1005 - 8350
600 24 1943 1943 1972 546 750 700 1280 - 13480
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-555
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
24
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
27
Split Bolted Body - Reduced Bore
Class 1500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 368 368 371 38 95 115 216 360 55
80 x 50 3 x 2 470 470 473 49 105 125 267 450 98
100 x 80 4 x 3 546 546 549 74 130 160 311 - 142
150 x 100 6 x 4 705 705 711 100 160 180 394 - 310
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-556
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
25
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
28
Split Bolted Body - Reduced Bore
Class 1500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
200x150 8x6 832 832 841 144 350 325 483 - 590
250x200 10x8 991 991 1000 192 400 365 584 - 1150
300x250 12x10 1130 1130 1146 239 460 430 673 - 1820
350x250 14x10 1257 1257 1276 239 460 430 750 - 2150
350x300 14x12 1257 1257 1276 287 550 535 750 - 2480
400x300 16x12 1384 1384 1407 287 550 535 830 - 2750
400x350 16x14 1384 1384 1407 315 580 550 830 - 3300
450x400 18x16 1537 1537 1559 360 600 580 920 - 4890
500x400 20x16 1664 1664 1686 360 600 580 990 - 5250
500x450 20x18 1664 1664 1686 406 650 600 990 - 7100
600x500 24x20 1943 1943 1972 454 700 640 1180 - 10200
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
TY Figure Number T-556
DESCRIPTION
BODY
LATERAL
BALL
STEM
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
26
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
29
Split Bolted Body - Full Bore
Class 2500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 451 451 454 42 125 150 235 96
80 3 578 578 584 62 155 185 280 - 205
100 4 673 673 683 87 195 230 340 - 345
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-655
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
27
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
30
Split Bolted Body - Full Bore
Class 2500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
150 6 914 914 927 131 360 350 485 - 795
200 8 1022 1022 1038 179 400 400 620 - 1410
250 10 1270 1270 1292 223 480 450 750 - 2120
300 12 1422 1422 1445 265 550 550 880 - 3250
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-655
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
28
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
31
Split Bolted Body - Reduced Bore
Class 2500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 x 40 2 x 1.1/2 451 451 454 38 115 220 600 90
80 x 50 3 x 2 578 578 584 42 125 230 600 182
100 x 80 4 x 3 673 673 683 62 155 280 - 305
150 x 100 6 x 4 914 914 927 87 195 340 - 548
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
T-656
DESCRIPTION
BODY
LATERAL
BALL
STEM
TY Figure Number
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
29
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
Split Bolted Body - Full Bore
Class 2500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 451 451 454 42 125 150 235 96
80 3 578 578 584 62 155 185 280 - 205
100 4 673 673 683 87 195 230 340 - 345
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-655
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
27
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
Split Bolted Body - Full Bore
Class 2500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
50 2 451 451 454 42 125 150 235 96
80 3 578 578 584 62 155 185 280 - 205
100 4 673 673 683 87 195 230 340 - 345
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
PLEASE REFER TO NEXT PAGE FOR LARGER SIZES
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
STANDARD CODE
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
BODY
T-655
TRUNNION MOUNTED BALL VALVE
DESCRIPTION
TY Figure Number
27
32
Split Bolted Body - Reduced Bore
Class 2500
Part.
1
2
3
4
5
6
7
20
22
40
41
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB C D E L Weight[Kg]
200x150 8x6 1022 1022 1038 131 360 350 485 - 1120
250x200 10x8 1270 1270 1292 179 420 400 680 - 1830
300x250 12x10 1422 1422 1445 223 500 450 770 - 2710
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
SEATS
TRUNNION MOUNTED BALL VALVE
TY Figure Number T-656
DESCRIPTION
BODY
LATERAL
BALL
STEM
STANDARD CODE
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
= Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clam
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
Butt Weld End ASME B16.25
Basic design ASME B16.34
Testing API 6D/ ISO 5208
Marking API 6D/ MSS SP25
OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
30
RF= Raised Face; BW= Clamp
BODY
LATERAL
BALL
STEM
SEATS
COVER
TRUNNION
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
33
Split Body Trunnion Mounted
NS DN A NB C D E Weight[Kg]
2 1/16 52 295 52,4 120 160 2152 9/16 65 333 65,1 130 180 2253 1/8 79 359 81,0 155 200 2554 1/16 103 435 103,2 200 250 2605 1/8 130 511 130,2 240 300 2957 1/16 179 562 179,4 270 350 330
NS DN A NB C D E Weight[Kg]
2 1/16 52 371 52,4 120 170 2102 9/16 65 422 65,1 130 190 2303 1/8 79 384 81,0 155 220 2404 1/16 103 460 103,2 200 270 2705 1/8 130 562 130,2 240 320 3157 1/16 179 613 179,4 270 370 375
NS DN A NB C D E Weight[Kg]
2 1/16 52 371 52,4 130 180 2102 9/16 65 422 65,1 150 200 2303 1/8 79 473 81,0 200 230 2604 1/16 103 549 103,2 220 290 3405 1/8 130 676 130,2 270 370 3907 1/16 179 711 179,4 350 410 435
NS DN A NB C D E Weight[Kg]
1 13/16 46 464 46,0 170 200 2302 1/16 52 521 52,4 200 240 2702 9/16 65 565 65,1 220 275 3253 1/16 79 619 77,8 240 290 3254 1/16 103 670 103,2 280 310 4155 1/8 130 737 130,2 375 450 5707 1/16 179 889 179,4 435 500 695
( Dimensions are in MM. )
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves . - For any additional informations (including weight figures) , Please contact us
API 5000 psi
API 10000 psi
API 2000 psi
API 6A - ISO 10423
API 3000 psi
WELLHEAD BALL VALVES
OVERALL DIMENSIONS & WEIGHTS
31
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
Split Body Trunnion Mounted
NS DN A NB C D E Weight[Kg]
2 1/16 52 295 52,4 120 160 215 382 9/16 65 333 65,1 130 180 225 563 1/8 79 359 81,0 155 200 255 694 1/16 103 435 103,2 200 250 260 975 1/8 130 511 130,2 240 300 295 2337 1/16 179 562 179,4 270 350 330 342
NS DN A NB C D E Weight[Kg]
2 1/16 52 371 52,4 120 170 210 672 9/16 65 422 65,1 130 190 230 893 1/8 79 384 81,0 155 220 240 1174 1/16 103 460 103,2 200 270 270 1955 1/8 130 562 130,2 240 320 315 4727 1/16 179 613 179,4 270 370 375 692
NS DN A NB C D E Weight[Kg]
2 1/16 52 371 52,4 130 180 210 672 9/16 65 422 65,1 150 200 230 893 1/8 79 473 81,0 200 230 260 1174 1/16 103 549 103,2 220 290 340 1955 1/8 130 676 130,2 270 370 390 4727 1/16 179 711 179,4 350 410 435 692
NS DN A NB C D E Weight[Kg]
1 13/16 46 464 46,0 170 200 230 1182 1/16 52 521 52,4 200 240 270 1762 9/16 65 565 65,1 220 275 325 2443 1/16 79 619 77,8 240 290 325 3624 1/16 103 670 103,2 280 310 415 6485 1/8 130 737 130,2 375 450 570 8477 1/16 179 889 179,4 435 500 695 1620
( Dimensions are in MM. )
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves . - For any additional informations (including weight figures) , Please contact us
API 5000 psi
API 10000 psi
API 2000 psi
API 6A - ISO 10423
API 3000 psi
WELLHEAD BALL VALVES
OVERALL DIMENSIONS & WEIGHTS
31
( Dimensions are in mm.)
34
Split Bolted Body
Class 150
Part.
1
2
3
4
5
21
22
40
41
200
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
15 1/2 108 140 - 14 90 185 3
20 3/4 117 152 - 19 90 185 4
25 1 127 165 - 25 95 185 6
40 1,1/2 165 191 - 38 125 365 11
50 2 178 216 - 51 130 365 17
80 3 203 283 - 76 155 455 28
100 4 229 305 - 102 170 455 49
150 6 394 457 - 152 300 800 65
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
20 x15 3/4 x 1/2 117 152 - 14 90 185 4
25 x 20 1 x 3/4 127 165 - 19 90 185 5
40 x 25 1,1/2 x 1 165 190 25 95 185 10
50 x40 2 x 1,1/2 178 216 - 38 125 365 15
80 x 50 3 x 2 203 283 - 51 130 365 25
100 x 80 4 x 3 229 305 - 76 155 455 42
150 x 100 6 x 4 384 457 - 102 170 455 60
200 x 150 8 x 6 457 521 - 152 300 800 86
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
BODY
155 / 156
FLOATING BALL VALVE
DESCRIPTION
TY Figure Number
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
RF = Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clamp End
STANDARD CODE Face to Face/End to End
Flange End
API 6D/ISO14313
ASME B16.5
Butt Weld End
Basic design
Testing
ASME B16.25
API 6D - B16.34 - ISO 17292
API 6D - API 598 - ISO 5208
Marking
FULL BORE - 155 OVERALL DIMENSIONS & WEIGHTS
( Dimensions are in MM. )
API 6D - MSS SP25
REDUCED BORE - 156 OVERALL DIMENSIONS & WEIGHTS
32
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
35
Split Bolted Body
Class 300
Part.
1
2
3
4
5
21
22
40
41
200
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
15 1/2 140 140 - 14 90 185 4
20 3/4 152 152 - 19 90 185 6
25 1 165 165 - 25 95 185 8
40 1,1/2 191 191 - 38 125 365 16
50 2 216 216 - 51 130 365 21
80 3 283 283 - 76 155 455 40
100 4 305 305 - 102 170 455 65
150 6 403 457 - 152 300 800 130
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
20 x15 3/4 x 1/2 152 152 - 14 90 185 5
25 x 20 1 x 3/4 165 165 - 19 90 185 7
40 x 25 1,1/2 x 1 190 190 - 25 95 185 14
50 x40 2 x 1,1/2 216 216 - 38 125 365 18
80 x 50 3 x 2 383 283 - 51 130 365 35
100 x 80 4 x 3 305 305 - 76 155 455 60
150 x 100 6 x 4 403 457 - 102 170 455 120
200 x 150 8 x 6 502 521 - 152 300 800 162
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
( Dimensions are in MM. )
Marking API 6D - MSS SP25
FULL BORE - 255 OVERALL DIMENSIONS & WEIGHTS
REDUCED BORE - 256 OVERALL DIMENSIONS & WEIGHTS
Butt Weld End ASME B16.25
Basic design API 6D - B16.34 - ISO 17292
Testing API 6D - API 598 - ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
RF = Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clamp End
STANDARD CODE
DESCRIPTION
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
FLOATING BALL VALVE
TY Figure Number 255 / 256
33
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
36
Split Bolted Body
Class 600
Part.
1
2
3
4
5
21
22
40
41
200
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
15 1/2 165 165 165 14 90 185 7
20 3/4 191 191 191 19 90 185 9
25 1 216 216 216 25 95 185 12
40 1,1/2 241 241 241 38 125 365 19
50 2 292 295 295 51 130 365 26
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
20 x15 3/4 x 1/2 191 191 191 14 90 185 9
25 x 20 1 x 3/4 216 216 216 19 90 185 13
40 x 25 1,1/2 x 1 241 241 241 25 95 185 18
50 x40 2 x 1,1/2 292 292 295 38 125 365 24
80 x 50 3 x 2 356 356 359 51 130 365 38
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
( Dimensions are in MM. )
Marking API 6D - MSS SP25
FULL BORE - 355 OVERALL DIMENSIONS & WEIGHTS
REDUCED BORE - 356 OVERALL DIMENSIONS & WEIGHTS
Butt Weld End ASME B16.25
Basic design API 6D - B16.34 - ISO 17292
Testing API 6D - API 598 - ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
RF = Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clamp End
STANDARD CODE
DESCRIPTION
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
FLOATING BALL VALVE
TY Figure Number 355 / 356
34
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
37
Split Bolted Body
Class 900
Part.
1
2
3
4
5
21
22
40
41
200
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
15 1/2 216 216 216 14 95 276 12
20 3/4 229 229 229 19 95 276 18
25 1 254 254 254 25 105 276 24
40 1,1/2 305 241 305 38 130 365 32
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
20 x15 3/4 x 1/2 229 229 229 14 95 276 14
25 x 20 1 x 3/4 254 254 254 19 95 276 20
40 x 25 1,1/2 x 1 305 305 305 25 105 276 27
50 x40 2 x 1,1/2 368 368 371 38 130 365 35
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
( Dimensions are in MM. )
Marking API 6D - MSS SP25
FULL BORE - 455 OVERALL DIMENSIONS & WEIGHTS
REDUCED BORE - 456 OVERALL DIMENSIONS & WEIGHTS
Butt Weld End ASME B16.25
Basic design API 6D - B16.34 - ISO 17292
Testing API 6D - API 598 - ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
RF = Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clamp End
STANDARD CODE
DESCRIPTION
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
FLOATING BALL VALVE
TY Figure Number 455 / 456
35
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
38
Split Bolted Body
Class 1500
Part.
1
2
3
4
5
21
22
40
41
200
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
15 1/2 216 216 216 14 95 276 16
20 3/4 229 229 229 19 95 276 18
25 1 254 254 254 25 105 276 26
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
20 x15 3/4 x 1/2 229 229 229 14 95 276 18
25 x 20 1 x 3/4 254 254 254 19 95 276 22
40 x 25 1,1/2 x 1 305 305 305 25 105 276 30
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
( Dimensions are in MM. )
Marking API 6D - MSS SP25
FULL BORE - 555 OVERALL DIMENSIONS & WEIGHTS
REDUCED BORE - 556 OVERALL DIMENSIONS & WEIGHTS
Butt Weld End ASME B16.25
Basic design API 6D - B16.34 - ISO 17292
Testing API 6D - API 598 - ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
RF = Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clamp End
STANDARD CODE
DESCRIPTION
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
FLOATING BALL VALVE
TY Figure Number 555 / 556
36
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
39
Split Bolted Body
Class 2500
Part.
1
2
3
4
5
21
22
40
41
200
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
15 1/2 264 264 264 14 95 276 18
20 3/4 273 273 273 19 95 276 25
25 1 308 308 308 25 105 276 33
DN[mm]
NPS[inches]
A - RF A - BW A - RTJ (*) NB D L Weight[Kg]
20 x15 3/4 x 1/2 273 273 273 14 95 276 20
25 x 20 1 x 3/4 308 308 308 19 95 276 28
40 x 25 1,1/2 x 1 384 384 384 25 105 276 36
(*) End to End dimension for HUB as per RTJ dimension .
- Design, dimensions and Weights are subject to change witout notice, except the dimensions established by International Standard codes .
- Weight values are referred to flanged end valves .
- For any additional informations, Please contact us :
( Dimensions are in MM. )
Marking API 6D - MSS SP25
FULL BORE - 655 OVERALL DIMENSIONS & WEIGHTS
REDUCED BORE - 656 OVERALL DIMENSIONS & WEIGHTS
Butt Weld End ASME B16.25
Basic design API 6D - B16.34 - ISO 17292
Testing API 6D - API 598 - ISO 5208
Face to Face/End to End API 6D/ISO14313
Flange End ASME B16.5
RF = Raised Face ; BW = Butt Welding ; RTJ = Ring Joint ; HUB = Clamp End
STANDARD CODE
DESCRIPTION
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
FLOATING BALL VALVE
TY Figure Number 655 / 656
37
BODY
LATERAL
BALL
STEM
SEATS
BODY SEAL
STEM SEALS
BODY BOLTS
BODY NUTS
LEVER
mm.)
- Design, Dimensions and Weights are subject to change Without notice, except the dimensions established by International Standard codes.
- Weight values are referred to flanged end valves.
- For any additional information, please contact us.
RF= Raised Face; BW=Bett Welding; RTJ= Ring Joint; Hub= Clamp
40
Part.
1
2
3
4
5
6
7
40
41
Part.
1
2
3
4
5
6
7
40
41
Part.
1
2
3
4
5
6
7
40
41
Note :
The company TY VALVE ITALY has taken every care in collecting and verifying the documentation contained in this catalogue.Nevertheless TY VALVE ITALY does not provide any guarantees for these informations.TY VALVE ITALY will not be responsible for any mistakes contained in it or for any damage either accidental or due to the use of this catalogue.The information herein contained is reserved property of TY VALVE ITALY and is subject to being modified without notice.
BODY BOLT ASTM A193 B7 ASTM A193 B7M ASTM A193 B7 ASTM A193 B7
BODY NUT ASTM A194 2H ASTM A194 2HM ASTM A194 2H ASTM A194 2H
TRUNNION ASTM A694 F52 / F60 ASTM A694 F52 / F60 AISI 4130 / AISI 4140 AISI 4130 / AISI 4140
COVER ASTM A694 F52 / F60 ASTM A694 F52 / F60 AISI 4130 / AISI 4140 AISI 4130 / AISI 4140
SEAT RING ASTM A694 F60+ENP ASTM A182 F51 AISI 4140+ENP UNS S17400
STEM AISI 4140+ENP UNS S318033 / S20910 AISI 4140+ENP UNS S17400
BALL ASTM A694 F60+ENP ASTM A182 F51 AISI 4140+ENP UNS S17400
LATERAL ASTM A694 F52 / F60 ASTM A694 F52 / F60 AISI 4130 / AISI 4140 AISI 4130 / AISI 4140
LOW ALLOY STEEL
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2
TRUNNION ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2
COVER ASTM A350 LF2
ASTM A105
SEAT RING ASTM A350 LF2+ENP ASTM A182 F316 ASTM A350 LF2+ENP ASTM A182 F316
BALL ASTM A350 LF2+ENP ASTM A182 F316 ASTM A350 LF2+ENP ASTM A182 F316
STEM AISI 4140+ENP UNS S31803 / S17400 AISI 4140+ENP UNS S31803 / S17400
BODY ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2
ASTM A105
ASTM A193 B7M
ASTM A194 2HH ASTM A194 2H
ASTM A105
ASTM A193 B7
ASTM A194 2H
DESCRIPTION
BODY
LATERAL
BALL
STEM
SEAT RING
COVER
TRUNNION
BODY BOLT
BODY NUT
DESCRIPTION
ASTM A105
ASTM A105
ASTM A105+ENP
AISI 4140+ENP
ASTM A105+ENP
ASTM A105
STANDARD MATERIALS
DESCRIPTIONDESCRIPTION
ASTM A105
DESCRIPTION
ASTM A105
CARBON STEEL
ASTM A105
ASTM A182 F316
UNS S31803 / S17400
ASTM A105
ASTM A105+ENP
ASTM A105
ASTM A182 F316
UNS S31803 / S17400 AISI 4140+ENP
ASTM A182 F316
ASTM A105
ASTM A105
ASTM A193 B7M
ASTM A193 B7M
ASTM A350 LF2 ASTM A350 LF2
LOW TEMPERATURE CARBON STEEL
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
LATERAL ASTM A350 LF2 ASTM A350 LF2
ASTM A105
ASTM A105
ASTM A193 B7
ASTM A182 F316
ASTM A105
ASTM A105+ENP
BODY BOLT ASTM A320 L7 ASTM A320 L7 ASTM A320 L7M ASTM A320 L7M
BODY NUT ASTM A194 Gr.7 ASTM A194 Gr.7 ASTM A194 Gr.7M ASTM A194 Gr.7M
BODY ASTM A694 F52 / F60 ASTM A694 F52 / F60 AISI 4130 / AISI 4140 AISI 4130 / AISI 4140
38
2Hm ASTm A194 2Hm
UNS S31803 / S20910
Notes :
The company TY VALVE ITALY has taken every care in collecting and verifyng the documentation contained in this catalogue.
Nevertheless TY VALVE ITALY does not provide any guarantee for these informations.
TY VALVE ITALY will not be responsible for any mistakes contained in it or for any damage either accidental or due to the use of this catalogue.
The information herein contained is reserved property of TY VALVE ITALY and is subject to being modified without notice.
41
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
FLOW DATAFLOW DATA
FLOW COEFFICIENTS (CV)
NS (inches) ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500 ASME 2500
1/2 16 14 12 11 11 103/4 44 38 34 31 30 291 90 78 69 65 63 47
1.1/2 227 211 187 167 163 902 x 1.1/2 145 145 140 120 120 100
2 420 420 400 330 330 2502.1/2 690 690 610 520 510 3203 × 2 200 200 200 190 180 200
3 1200 1050 1000 910 820 5004 × 3 600 600 600 590 550 560
4 2200 2100 1850 1800 1700 11006 × 4 800 800 790 790 780 745
6 5150 5100 4600 4380 3800 25008× 6 2150 2150 2150 2150 2150 2150
8 9500 9400 9000 8500 7400 530010× 8 4300 4300 4300 4450 4450 4100
10 15000 15000 14700 14500 11500 830012 × 10 7550 7550 7550 8000 9000 755014 × 10 6000 6000 6000 6100 6100 -
12 23000 23000 22500 21100 18000 1300014 × 12 14000 14000 14000 12800 13000 -16 × 12 9100 9100 9100 8900 8900 -
14 28000 28000 28000 25000 21000 -16 × 14 15000 15000 15000 14200 14100 -
16 37200 37200 37200 34500 27500 -18 × 16 21000 21000 21000 19200 19000 -20 × 16 15300 15300 15300 13800 12000 -
18 49000 49000 49000 45000 37000 -20 × 18 28400 28400 28400 25000 25000 -
20 59000 59000 59000 55200 47800 -24 × 20 28200 28200 28000 25100 20600 -
22 68200 68200 68200 62000 54000 -24 92000 92000 92000 83800 70000 -
30 × 24 36000 36000 36000 32900 - -26 110000 110000 110000 98500 - -28 121000 121000 121000 113000 - -30 145000 144000 144000 130000 - -
36 × 30 64000 64000 64000 61500 - -32 170000 170000 170000 151000 - -
36 × 32 87000 87000 87000 69500 - -36 210000 210000 210000 198200 - -
39
42
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
SERVICE and MAINTENANCESERVICE and MAINTENANCE
Fugitive EmissionsPerformance and FunctionalityHigh Pressure GasHigh TemperatureLow TemperatureFire SafeNDE Inspections
TESTINGTESTINGMeeting your testing requirements in accordancewith industry standards and customer specifications.
In accordance with :API 6A, API 6D, ISO 15848, ISO 10497 and special requirements.
Providing total service andsupport, including operationalprocedures and testing(on site as needed).
40
SERVICE and MAINTENANCETY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
SERVICE and MAINTENANCESERVICE and MAINTENANCE
Fugitive EmissionsPerformance and FunctionalityHigh Pressure GasHigh TemperatureLow TemperatureFire SafeNDE Inspections
TESTINGTESTINGMeeting your testing requirements in accordancewith industry standards and customer specifications.
In accordance with :API 6A, API 6D, ISO 15848, ISO 10497 and special requirements.
Providing total service andsupport, including operationalprocedures and testing(on site as needed).
40
Providing dedicated service and support, including operationalprocedures and testing(on-site as needed).
43
TY VALVE ITALY BALL VALVESTY VALVE ITALY BALL VALVES
Contact us:TY VALVES ITALY srl
Sales OfficeVia Crivelli N 1420027 Rescaldina, (MI)Italy
Phone: +39 0331 579923Fax: +39 0331 578790Email: [email protected]
Copyright©2010 TY Valves Italy 41
PlantVia Kennedy N° 920023 Cerro Maggiore (MI)Italy
Phone: +39 0331 515268Fax: +39 0331 516974
FIRE SAFE CERTIFICATES(API 607, API 6FA & ISO 10497)
44
TY Valve Italy ball valves
FUGITIVE EMISSIONSTYPE TESTING CERTIFICATES
ISO 15848Industrial valves – Measurement, test and qualification procedures for fugitive emissions
Contact us:
TY VALVE ITALY srl
Via Provinciale Saronnese, 5820027 Rescaldina (MI) – Italy
Phone: +39-0331-579931Fax: +39-0331-577806E-mail: [email protected]