Soil & Waste Systems
PVC-UE Roofline,Window &
Cladding Systems
Rainwater Systems
Soil & Waste Systems
Underground DrainageSystems
MDPESystems
Hot & ColdPlumbing Systems
building the future
2 www.floplast.co.uk
INTRODUCTION
founded in 1991, has established itself as a manufacturer ofhigh quality plastic building and plumbing systems for the constructionindustry, in particular domestic and commercial new build andrefurbishment projects.
FloPlast offer an extensive choice of systems and products, in a rangeof sizes and colours, to suit all tastes and applications.
The FloPlast reputation for technical excellence, quality andcompetitively priced products have established the company as aleading supplier of Above Ground Plumbing Systems.
High Quality Soil & Waste Systems
Soil & Waste Systems
● 110mm Ring Seal Soil System PVC-U BS EN 1329-1:2000/BS 4514:2001.
● 110mm Solvent Weld Soil System PVC-U BS EN 1329-1:2000/BS 4514:2001.
● 110mm Access Fittings BS 4514:2001.
● Air Admittance Valves BBA Certificate No. 06/4343 and BS EN 12380:2002.
● W.C Pan Connectors Polypropylene (PP) BS 5627:1984.
●� Push-Fit Waste System Polypropylene (PP) BS EN 1451-1:2000/BS 5254.
●� ABS Solvent Weld Waste System BS EN 1455-1:2000/BS 5255.
●� MuPVC Solvent Weld Waste System BS EN 1566-1:2000/BS 5255.
●� “Unicom” Universal Compression Waste System BS 5254/BS EN 1451.
●� Waste Traps BS EN 274.
●� 21.5mm Overflow Waste System.
Further guidance should also be sought by reference to:
●� BS EN 12056:2000 Gravity Drainage Systems inside Buildings.
●� BS 8000 -13:1989 Workmanship on building sites. Code of practice for above ground drainage and sanitary appliances.
The Building Regulations 2000
●� Approved Document H - Drainage and Waste Disposal:2002.
●� Approved Document B - Fire Safety:2000.
System Features
●�Comprehensive, integrated and modern range of products and systems for all soil and waste applications.
●�Components have a consistent high - gloss finish and colour and are essentially maintenance free.
●� Tough and durable, yet lightweight for ease of installation.
●� Compatible with most other existing materials and systemsmanufactured to British/European Standards.
●� Manufactured to British/European Standards specification where applicable.
●� Colour matching between systems facilitates colour co - ordination where sanitary pipework is located externally.
Standards/Quality Control
FloPlast operates quality and environmentmanagement systems which have been assessedby BSI and comply with the requirements of bothBS EN ISO 9001:2008 Certificate No. FM 501414and BS EN ISO 14001:2004 Certificate No. EMS 538445.
All products are subject to continuous quality control procedures andproducts manufactured to British Standard Specifications are marked accordingly.
Working Temperature
Soil and Waste systems may be used to carry liquids when subjected toa continuous flow, with a maximum temperature of 76°C. Intermittentdischarges of up to 100°C may occur, provided that a duration of lessthan two minutes is observed.
Pipework support (BS EN 12056:2000)Maximum distances for support
Vertical Horizontal
32mm 1.2m 0.5m
40mm 1.2m 0.5m
50mm 1.2m 0.6m
110mm 2m 1m
www.floplast.co.uk 3
Certification and Standards
●� Product is A1 approved in accordance with BS EN 12380 - it can be installed below the flood level of connected appliances.
●� Tested and approved for use in installations varying between -20° & +60°c (no insulation required).
●� CE marked to level 4 attestation of conformity in accordance with BS EN 12380.
●� FloPlast air admittance valves are kitemark licenced in accordance with BS EN 12380:2002 licence number KM 512474.
●� British Board of Agrément (BBA) approved 06/4343.
General Information
The FloPlast Air Admittance Valve is designed to allow the free entry of air into the sanitary pipework system without the escape of foul gasses into the building.
When installed into sanitary pipework systems conforming to BS EN 12056:2000, the FloPlast Air Admittance Valve not only prevents the loss of water from trap seals due to inducedsiphonage, but also has the added advantage of providing an early warning indicator to a potential drainage blockage. The AF110 Push-fit Air Admittance Valve may also be used as a secondary rodding point to remove such blockages.
All Valves should be stored/installed in an upright position.
The AF32 Air Admittance Valve has a universal adaptor to fit to32mm/40mm/50mm Solvent Waste Pipe. It is produced fromwhite ABS/PVC, and is designed for use with waste pipeconforming to British/European standards connected to a solvent cemented pipe adaptor supplied with the product.
Approved Document H of the Building Regulations only permits AirAdmittance Valves that conform to BS EN 12380.
Ventilation and access must be providedto all air admittance valve installations.
Further detailed informationon FloPlast Air AdmittanceValves is available from thedetailed sheet accompanyingthe BBA Agrément CertificateNo.06/4343 or visit our website:www.floplast.co.uk
INTRODUCTIONAir Admittance Valves BS EN 12380
www.floplast.co.uk4
AX110
External Air Admittance Valve Push-fit
CODE COLOUR SIZEAX110 Grey/Black/White 110mm/82mm
Push-fit/Solvent
Document H Clause 1.31 states that “Ventilating pipes open to outsideair should finish at least 900mm above any opening into the buildingwithin 3 metres”. This new development by FloPlast, of an External AirAdmittance Valve, will allow the installation of an external soil pipewithin 3 metres of any opening and terminate at the same height as if itwere installed internally, ie. 200mm (minimum) above the highest wetentry point to the soil vent pipe. See diagram below.
900mm
Less than 3m
Minimum200mm
5www.floplast.co.uk
Valve Open (Negative pressure in pipework)
Valve Closed (Normal working conditions)
Valve bodyBS EN 1329 -1:1999
Negative pressure
Diaphragmseal BS EN 681-1:1996
Diaphragm sealcarrier
82mm/110mm Soil Pipe
Cover sealBS EN 681-1:1996
CLOSED
Advantages and Benefits●� Saves the need to penetrate the outer roof shell, giving more aesthetic roof lines.
●� Saves on the cost of pipes and expensive fittings.
● Saves on roof flashing.
●� Saves on labour costs.
●� Prevents the loss of water from trap seals and consequent release of foul air into the building.
● Secondary rodding point.
Black GreyWhite
www.floplast.co.uk
32mm Diameter Discharge Pipe
40mm Diameter Discharge Pipe
110mmDiameter Discharge Pipe
AV110 Air Admittance Valve
TW472ApplianceHalf Trap
TB33 Bottle Trap
Typical Domestic Discharge SystemMaximum 5 floorsMaximum 2 groups of appliances per floor
40mm DiameterDischarge Pipe
TSB42Shallow
Bath Trap
AF32Air
AdmittanceValve Solvent
AV32
Air Admittance Valve Compression
CODE SIZEAV32 32mmWhiteAV40 40mmWhiteAV50 50mmWhite
Air Admittance Valve Solvent
CODE SIZEAF32 32/40/50mmWhite
(Universal adaptor to fit 32mm/40mm/50mm Solvent Waste Pipe)
Air Admittance Valve Solvent
CODE SIZEAV110 110mm(Solvent)
Grey/Black/White
Air Admittance Valve Push-fit
CODE SIZEAF110 110mm(Push-Fit)
Grey/Black/White
For 82mm solvent: Remove seal from 110mm push-fit for82mm solvent connection.
AF32 AV110 AF110
Install 200mm above Highest Joint
INTRODUCTION110mm Ring Seal Soil System BS EN 1329 - 1:2000/BS 4514:2001
Fixing Guide
Install and test system in accordance with BS EN 1610:1998.
●� Commence the stack from the base and work up. Mark theposition of the brackets and drill and fix screws before erecting the stack.
●� Fix pipe or socket brackets at maximum 2m centres verticaland at maximum 1m centres horizontal.
●� An allowance for expansion should be made by withdrawing all pipe and fitting spigots from sockets by 10mm. Soil Fittings with spigot ends can be inserted into the socket todepth marks engraved on the spigot to ensure correctallowance is made for expansion. Expansion joints should beincorporated every 4m.
●� The use of silicone lubricant on all seals will facilitate jointing.
●� The system should incorporate suitable access points to enable testing and maintenance of the system.
www.floplast.co.uk
Solvent Weld Connection to ABSand MuPVC Solvent Weld Waste
Straight Push-fit Connection to Push-fit Waste or Solvent Weld Waste
32mm 40mm 50mm
SP22 + WS38 SP22 + WS39 SP22
SP22 + MU38 SP22 + MU39 SP22
SP10 SP11 SP12
BOSS ADAPTORS
ABS
MuPVC
SP560ADJUSTABLE BEND 0-90°
SP101 Straight WC Connector
SP440 Offset Bend
FCIIO Fire Protection Collar
SP230921⁄2˚ (871⁄2°) Double Branch
SP319 Strap on Boss
SP82 Pipe Clip
The above drawings are for illustrative purposes only. For detailed installation advice please contact your local stockist.
FIRE COLLAR APPLICATIONUsed to seal PVC-U pipes as they passthrough cavity walls and floors. In afire the intumescent lining reacts toextreme heat which expands andblocks a potential fire path.
6
SP302 Vent Terminal
SP83 Socket Clip
SP274ACCESS PIPE
SOCKET/SPIGOT
SP435 Offset Bend
SP320 Weathering Slate
AV40Air
AdmittanceValve
SP581Boss PipeSocket/Spiget
SP300 Weathering Collar
The FloPlast Air Admittance Valve is designed to allowthe free entry of air into the sanitary pipeworksystem without the escape of foul gases into the
building. Sizes: 32mm to 110mm.
AV110Air Admittance Valve
Black GreyWhite
www.floplast.co.uk
110mm Pipe and FittingsPipe-Plain Ended
CODE SIZESP1* 3mSP2 4m
Pipe-Single Socket
CODE SIZESP3* 3mSP4 4m
Brackets
CODEPipe Clip SP82*Socket Clip SP83
Pipe Couplings
CODEDouble Socket SP105*
Single Socket SP124*
Soil Pipe Bends
CODE921⁄2° (871⁄2°) SP161*
Bend(Socket/Spigot)
921⁄2° (871⁄2°) SP561*Bend
(Double Socket)
1121⁄2° (671⁄2°) SP162Bend
(Socket/Spigot)
135° (45°)Bend SP163*
(Socket/Spigot)
Adjustable Bend 0-90°
CODESP560
(PP - Do not solvent weld)
Offset Bends
CODE135° (45°) SP440*
Top
135° (45°) SP435*Bottom
Soil Pipe Branches
CODE921⁄2° (871⁄2°) SP190*
Branch
1121⁄2° (671⁄2°) SP200Branch
135° (45°) SP210Branch
921⁄2° (871⁄2°) SP230Double Branch
Access Fittings
CODE921⁄2° (871⁄2°) SP169*Access Bend
921⁄2° (871⁄2°) SP502Access Branch
Screwed Access SP292Cap
Socket Plug SP296*
Access Pipe(Socket/Spigot) SP274*
Access Pipe(Socket/Solvent Socket) SP275
Bosses/Manifold
CODEBoss Pipe SP581
(Socket/Spigot)
Boss Pipe SP582(Socket/Solvent Socket)
Short Boss Pipe SP583*
Strap Boss SP319*
Soil Manifold SP588(One open boss)
32/40/50mm connections
Terminal Fittings
CODEWeathering Collar SP300
Vent Terminal SP302*
Extract Cowl SP310
457 x 457mmWeathering Slate SP320
Boss Adaptor - Rubber (Push-fit)
CODE SIZESP10 32mmSP11 40mmSP12 50mm
Solvent Boss Adaptor
CODE SIZESP20 32mmSP21 40mmSP22 50mm
Reducers
CODE110x50mm SP95Waste#
110x68mm SP96Rainwater
110x82mm Soil SP97(Grey only)
Universal Waste D95Adaptor
(32/40/50)
Universal D96Rainwater
Adaptor (Sq/Rd)
80x110mm Adaptor D97#To reduce to 32mm or 40mm waste useWS39/40, MU39/40 or WP39/40 respectively
Drain Connector
CODESP107
Universal Pipe Connector
CODESP140
Adapts to Soil/Clay/CI/Drainage
Fire Protection Collar
CODE SIZEFC110 110mm
(FC50, FC82 and FC160 available to order)
Fire Wrap
CODEFW110
Fits 110mm pipe
7
*
(Available inGrey only)
INTRODUCTION“Cast Iron” Style 110mm Ring Seal Soil System PVC-U BS EN 1329 - 1:2000, BS 4514:2001
www.floplast.co.uk
Pipe-Plain Ended
CODE SIZESP9 1.8m
Pipe Coupling
DS Couplingwith CODEFixing Lugs SP115
Brackets
CODEPipe Clip SP84
Pipe Spacer SP89
Soil Pipe Bends*
CODE921⁄2° (871⁄2°) SP161
Bend(Socket/Spigot)
135° (45°) SP163Bend
(Socket/Spigot)
921⁄2° (871⁄2°) SP561Bend
(Double Socket)
135° (45°) SP563Bend
(Double Socket)
Soil Pipe Branches*
CODE921⁄2° (871⁄2°) SP190Plain Branch(Double Socket)
921⁄2° (871⁄2°) SP192Boss Branch(Double Socket)
Access Fittings*
CODEAccess Pipe SP274(Socket/Spigot)
921⁄2° (871⁄2°) SP169Access Bend(Socket/Spigot)
Terminal Fittings
CODEVent Terminal SP302
Weathering Collar SP300
Boss Pipe Fittings
CODEBoss Pipe* SP58I(Socket/Spigot)
Strap Boss SP319
Solvent Cement can be used withcaution, alternatively use external silicone sealant.
Waste Adaptor - Rubber (Push-Fit)
CODE SIZESP10 32mm
SP11 40mm
SP12 50mm
Lubricants
CODE800gm Lubricant Spray SG800
100gm Silicone Grease SG100
400ml SiliconeLubricant Spray SL400
Fixings
CODEFC65
12 gauge x 65mm Stainless Steelfixings for “Cast Iron” Range (Socket Fixings)
Flexible Coupling
SIZE CODE98mm -115mm D102
Flexi-coupling
*All complete with Socket Shroud
Black
Dimensions (mm)
A B C D E F G H I268 210 102 149 132 85 110ø 89 75
Soil Manifold BS EN 1329 - 1:2000/BS 4514:2001
8
The FloPlast Soil Manifold is designed to fit a soil stack in the corner of a room.
● Helps prevent stack induced siphonage on connecting runs.
●� Prevents crossflow design problems.
●� 32mm, 40mm, and 50mm connections possible in all inlets.
●�Simple push-fit connection for all waste pipes.SP588
Black GreyWhite
9www.floplast.co.uk
110mm Solvent Soil System BS EN 1329 - 1:2000, BS 4514 2001
Soil-WC Connectors BS EN 1329 - 1:2000, BS 5627
Pipe-Plain Ended
CODE SIZESS1 3mSS2 4m
Brackets
CODEPipe Clip SS82
Socket Clip SS83
Pipe Couplings
CODEDouble Socket SS106
Single Socket(Solvent/Ringseal) SS107
Offset Bends
CODETop SS440
Bottom SS435
Soil Pipe Bends
CODE921⁄2° (871⁄2°) SS561
Bend(Double Socket)
135° (45°) Bend SS563(Double Socket)
90° Bend SS168(Spigot/Socket)
Soil Pipe Branches
CODE921⁄2° (871⁄2°) SS191
Branch(Triple Socket)
135° (45°) SS211Branch
(Triple Socket)
Vent Terminal
CODESS302
Bosses
CODEShort Boss Pipe SS583
Strap Boss SS319Boss Adaptor SS20
32mmBoss Adaptor SS21
40mm
Access Fittings
CODEAccess Pipe SS275(Double Socket)
Screwed SS292Access Cap
921⁄2° (871⁄2°) SS569Access Bend(Double Socket)
921⁄2° (871⁄2°)Access Branch SS503
(Triple Socket)
Swan Neck
CODESP100
Straight
CODESP101
Offset
CODESP102
90° Bend
CODESP103
250mm Extension
CODESP104
Flexible
CODESP106
14° Connector
CODESP108
Access Fittings
For additional items to complementSolvent Soil System please seepage 7, Ring Seal Soil System.
A full range of horizontal pan connectors are available for use with WCs as specified in BS 5627:1984. Made in polypropylene, they are supplied with an integral sealing diaphragm which allows for up to 5° misalignment in any direction.
Olive GreyBlack
White
P Trap 38mm Seal
Code SizeTP33 32mmTP43 40mm
P Trap 76mm Seal
Code SizeTP37 32mmTP47 40mm
S Trap 38mm Seal
Code SizeTS33 32mmTS43 40mm
S Trap 76mm Seal
Code SizeTS37 32mmTS47 40mm
Telescopic P Trap 76mm Seal
Code SizeTP47T 40mm
Shallow Bath Trap
Code SizeTSB42 40mm
With cleaning eye & 20mm seal
Low Level Bath Trap 50mm Seal
Code SizeTLB45 40mm
With cleaning access for overflow
Washing Machine Trap
Code SizeTW471 40mm
With 600mm stand pipe & 2 clips
Appliance Half Trap 76mm Seal
Code SizeTW472 40mm
TW473 40mm
TW474 40mm
INTRODUCTIONWaste Traps BS EN 274
10 www.floplast.co.uk
Bottle Trap 38mm Seal
Code SizeTB33 32mmTB43 40mm
Bottle Trap 76mm Seal
Code SizeTB37 32mmTB47 40mm
Anti Vac Bottle 76mm Seal
Code SizeTB37A 32mmTB47A 40mm
Telescopic Bottle Trap 76mm Seal
Code SizeTB37T 32mmTB47T 40mm
Plain Swivel Elbow
Code SizeWC26 32mmWC27 40mm
Appliance Trap Adaptor
Code SizeTWT41 40mm
Overflow & Hose Connector
Code SizeTHC41 40mm
Telescopic Pedestal Trap 76mm Seal
Code SizeTD372T 32x32mmTD374T 32x40mm
Patent No. GB2362658Reg. Design No. 2092016
Shower Trap
Code SizeTH41 40x19mm
(Plastic Grid)
TH43 40x19mm(Chrome Grid)
TH51 40x50mm(Plastic Grid)
TH53 40x50mm(Chrome Grid)
White
Traps to BS EN 274 are manufactured in white hightemperature polypropylene with compression type outletsthat fit plastic and copper waste pipes 32mm/11⁄4”and40mm/11⁄2”.
11www.floplast.co.uk
Waste Systems
Waste Systems Fixing Guide
Install and test system in accordance with BS EN 1610:1998.
●� Fix pipe brackets at maximum 1.2m centres vertical and at maximum 0.5m centres horizontal for 32mm and 40mm, 0.6m centres for 50mm.
●� An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems.
●� For solvent weld installations incorporate expansion ringseal couplings at relevant points for long pipe runs.
●� It is recommended that ABS and Polypropylene wastesystems where externally installed are protected againstprolonged exposure to sunlight with exterior gloss paint.
●� For solvent weld systems ensure the pipe is cut square, all swarf removed and cleaning fluid applied to both surfaces of joint. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set beforehandling and twelve hours before testing system.
Access Plug
CODE SIZEWS30# 32mmWS31# 40mmWS32# 50mm
Pipe Clip
CODE SIZEWS34# 32mmWS35# 40mmWS36 50mm
Reducer
CODE SIZEWS38# 40x32mmWS39 50x32mmWS40 50x40mm
135° (45°) Branch
CODE SIZEWS42* 32mmWS43 40mm
Level Invert Reducer
CODE SIZEWS50* 40x32mm
921⁄2° (871⁄2°) Cross Tee
CODE SIZEWS58* 40mm
Tank Connector
CODE SIZEWS60 32mmWS61 40mm
Adaptors
CODE SIZEMale WS63* 32mm
WS64* 40mmFemale WS66* 32mm
WS67* 40mm
3m Wastepipe
CODE SIZEWS01# 32mmWS02# 40mmWS03 50mm
Straight Coupling
CODE SIZEWS07# 32mmWS08# 40mmWS09 50mm
90° Bend
CODE SIZEWS10# 32mmWS11# 40mmWS12 50mm
921⁄2° (871⁄2°) Bend
CODE SIZEWS14 32mmWS15 40mmWS16 50mm
135° (45°) Bend
CODE SIZEWS18# 32mmWS19# 40mmWS20 50mm
Tee
CODE SIZEWS22# 32mmWS23# 40mmWS24 50mm
90° Conversion Bend
CODE SIZEWS26# 32mmWS27# 40mmWS28 50mm
135° (45°) Conversion Bend
CODE SIZEWS76 32mmWS77 40mm
A light in weight yet strong and cost effective option, the FloPlast ABSSolvent Weld System is available in 32mm, 40mm and 50mm sizeswith an extensive range of fittings to meet most installation requirements.
ABS Solvent Weld System BS EN 1455-1:2000/BS 5255:1989
White Black Grey(*White only)
(# Available in Black)
Made in polypropylene, this quick and easy to install waste system incorporating a push-fit ring seal system is available in32mm, 40mm and 50mm sizes. No solvent welding required.
INTRODUCTION
www.floplast.co.uk12
Push-Fit Waste Systems BS EN 1451-1:2000/BS 5254:1976
3m Wastepipe
CODE SIZEWP01 32mmWP02 40mmWP03 50mm
Straight Coupling
CODE SIZEWP07 32mmWP08 40mmWP09 50mm
90° Bend
CODE SIZEWP10 32mmWP11 40mmWP12 50mm
921⁄2° (871⁄2°) Bend
CODE SIZEWP14 32mmWP15 40mmWP16 50mm
135° (45°) Bend
CODE SIZEWP18 32mmWP19 40mmWP20 50mm
Tee
CODE SIZEWP22 32mmWP23 40mmWP24 50mm
90° Conversion Bend
CODE SIZEWP26 32mmWP27 40mm
Socket Plug
CODE SIZEWP30 32mmWP31 40mmWP32 50mm
Pipe Clip
CODE SIZEWP34 32mmWP35 40mmWP36 50mm
Reducer
CODE SIZEWP38 40x32mmWP39 50x32mmWP40 50x40mm
Tank Connector
CODE SIZEWP60 32mmWP61 40mm
90° C
50mm:Grey only White Black Grey
0-90* ADJUSTABLE BEND
13www.floplast.co.uk
PVC-U Solvent Waste System BS EN 1329 - 1- 2000/BS 5255:1996
This extremely durable solvent weld system is unaffected byultra violet light, provides resistance to most inorganic acidsand alkalis and is specifically formulated to be resistant toboiling water and will not support combustion.
3m Wastepipe
CODE SIZEMUO1 32mmMUO2 40mmMUO3 50mm
Straight Coupling
CODE SIZEMUO7 32mmMUO8 40mmMUO9 50mm
90° Bend
CODE SIZEMU10 32mmMU11 40mmMU12 50mm
921⁄2° (871⁄2°) Bend
CODE SIZEMU14 32mmMU15 40mmMU16 50mm
135° (45°) Bend
CODE SIZEMU18 32mmMU19 40mmMU20 50mm
Tee
CODE SIZEMU22 32mmMU23 40mmMU24 50mm
90° Conversion Bend
CODE SIZEMU26 32mmMU27 40mmMU28 50mm
Access Plug
CODE SIZEMU30 32mmMU31 40mmMU32 50mm
Pipe Clip
CODE SIZEMU34 32mmMU35 40mmMU36 50mm
Reducer
CODE SIZEMU38 40x32mmMU39 50x32mmMU40 50x40mm
921⁄2° (871⁄2°) Cross Tee
CODE SIZEMU58 40mmMU59 50mm
Tank Connector
CODE SIZEMU60 32mmMU61 40mm
3m Wastepipe
CODE SIZEWPO1 32mmWPO2 40mm
Straight Coupling
CODE SIZEWC07 32mmWC08 40mm
90° Bend
CODE SIZEWC10 32mmWC11 40mm
0-90° Adjustable Bend
CODE SIZEWC14 32mmWC15 40mm
Make your life easier with theFloPlast 0-90° adjustable wastebend, the one fitting that will getyou out of a tight spot.
135° (45°) Bend
CODE SIZEWC18 32mmWC19 40mm
Tee
CODE SIZEWC22 32mmWC23 40mm
90° Conversion Bend
CODE SIZEWC26 32mmWC27 40mm
Reducer
CODE SIZEWC38 40x32mm
Flex-Tube
CODE SIZEFT32 32mmFT40 40mm
Olive Grey
Unicom Compression Waste System BS 5254, BS EN 1451-1:2000
Made in polypropylene, this quick and easy to install wastesystem incorporating a compression outlet that accepts plasticand copper pipes. Available in 32mm and 40mm sizes. No solvent welding required.
White
INTRODUCTION
14 www.floplast.co.uk
Overflow Waste System
Connectors
3m Overflow Pipe
CODEOS01
Straight Coupling
CODEOS10
90° Bend
CODEOS11
135° (45°) Bend
CODEOS12
Tee
CODEOS13
Straight Tank Connector
CODEOS14
Bent Tank Connector
CODEOS15
Pipe Clip
CODEOS16
Overflow Waste Reducer
CODE SIZEOS17 x32mmOS18 x40mm
Fits both push-fit and sovent weld systems
Coupling
CODE SIZEWF07 30-38mmWF08 38-45mm
Elbow
CODE SIZEWF10 30-38mmWF11 40-48mmSP111 105-116mm
Tee
CODE SIZEWF22 30-38mmWF23 40-48mmSP112 105-116mm
End Cap
CODE SIZEWF31 40-50mmSP113 105-116mm
●� Flexible range of connectors, suitable for a wide variety of applications.
●� Will fit all pipes (PVC/Copper/Lead etc) within each specific size range.
●� Elbows and Tees must not be used in underground installation situations. End Caps can be used as temporary blanking plugs.
A 21.5mm solvent weld overflow system in PVC-U with anextensive range of fittings to meet most installation requirements.
Fixing Guide
●� Fix pipe brackets at maximum 0.6m centres for both vertical and horizontal runs.
●� No expansion gap required on the solvent weld overflow system.
●� Solvent weld joints in accordance with ABS/PVC-U Waste Systems instructions.
Grey
White21.5mm Overflow Waste PVC-U Solvent
OS14STRAIGHT TANK CONNECTOR
15www.floplast.co.uk
400ml Silicone lubricant Spray
CODESL400
800gm lubricant Gel
CODESG800
100gm Silicone Grease
CODESG100
125ml Solvent Cement
CODEBS6209 SC125
250ml Solvent Cement
CODEBS6209 SC250
Ancillaries
Number of joints achievable (for guidance only)
Solvent Weld 32mm 40mm 50mm 110mm
125ml 27 27 27 7
250ml 55 55 55 15
Lubricant
100gm Silicone Grease 160 120 100 60
800gm Lubricant Gel 1200 950 800 450
400ml Silicone Spray 600 420 400 225
Soil & Waste Systems Compatibility Chart
110mm Above Ground Push-Fit Waste ABS Solvent Weld WasteDrainage
32mm 40mm 50mm 32mm 40mm 50mmManufacturer
Hepworth ✔ ✔ ✔ ✔ ✔ ✔ ✔
Brett Martin ✔ ✔ ✔ ✔ ✔ ✔ ✔
Osma ✔ ✔ ✔ ✔ ✔ ✔ ✔
Polypipe Terrain ✔ ✔ ✔ ✔ ✔ ✔ ✔
Marley ✔ ✔ ✔ ✔ ✔ ✔ ✔
Hunter ✔ ✔ ✔ ✔ ✔ ✔ ✔
building the future
FloPlast LimitedCastle RoadEurolink Business ParkSittingbourneKent ME10 3FPUK
Tel: 01795 431731
Sales Office Direct Line:
01795 421422Fax:
01795 431188E-mail:[email protected]
Website:www.floplast.co.uk
01/07/09
www.floplast.co.uk
Other systems available
PVC-UE Roofline, Window & Cladding Systems
PVC-U Rainwater Systems
‘Alprene’ Compression Fittingsfor MDPE
Underground Drainage Systems
Push-fit Hot & Cold Plumbing Systems
PVC-UE Roofline,Window &
Cladding Systems
Rainwater Systems
Soil & Waste Systems
Underground DrainageSystems
MDPESystems
Hot & ColdPlumbing Systems