1
1.1. MATERIALSCable Trays shall be made of CRCA ASTM A 36 or equiv-alent or Pre-Galvanized Steel Sheet (ASTM A 653).
1.2. WELDINGAl-Shamali & Waris Cable Trays are welded by MIG (Metal Inert Gas) or TIG (Tungsten Inert Gas) weldingprocess for producing smooth, clean, slag-free weldents.
1.3. FINISHESAl-Shamali & Waris supplies Cable Trays in following 3 different finishes :1. Pre-galvanized finish: As per ASTM A 653, usually pre-galvanized sheets are used for manufacturing of Cable Trays.2. Hot-Dip galvanized finish: Cable Trays fabricated from CRCA ASTM A 36 or equivalent are Hot-Dip galvanizedafter fabrication in accordance with BS EN ISO 1461.3. Powder Coat finish: Cable Trays fabricated from CRCA ASTM A 36 or equivalent are powder coated after fabrica-tion as per clients’ specifications.
2. DIMENSIONSA. Ladder – Type Trays1. Lengths of straight sections are usually in 2.44 Mtr or3.0 Mtr.2. Widths:- 75 - 1000 mm plus or minus 6.0mm inside dimension.3. Depths:- Outside depths shall be 70, 100, 120, 150 and200mm plus or minus 3.0mm.4. Rung Spacing on Straight Section 200 to 300mm on centers.5. Radius: - 300, 450, 600 and 900mm.Degree of Arc for Bends: - 30, 45, 60 and 90 degrees.
B. Cable Tray - Perforated Type.1. Lengths of Straight Sections are usually 2.44 Mtr. or 3.0Mtr.2. Widths:- 50 - 1000 mm plus or minus 6.0mm inside
dimension.3. Depths:- Outside depths shall be 25, 50, 75, 80, 100, 25,150 and 200mm plus or minus 3.0mm.4. Radius:- 300, 450 and 600mm.5. Degree of Arc for Bends: - 30, 45, 60 and 90 degrees.Bottom- The bottom is punched (Perforated Type).
C. Cable Tray - Solid Bottom Type.1. Lengths of straight sections: - 2.44 Mtr or 3.0 Mtr plus orminus 3.0mm.2. Widths:- 50 - 1000mm plus or minus 6.0mm inside dimension.3. Depths:- Outside depths shall be 25, 50, 80, 100, 125, 150 and 200mm plus or minus 3.0mm.4. Radius:- 300, 450,600 and 900mm .5. Degree of Arc for Bends:- 30, 45, 60 and 90 degrees.6. The bottom is solid type.
3. PROTECTION FOR CABLESThe inside of cable tray systems have smooth surface withoutany sharp edges, burrs or projections which may cause damageto cables during installation.
4. FITTINGSThe design and construction for all types of Cable Tray Fittingsis based on supporting to cable trays as recommended in CableTray Standard VE 1-5.05.
5. APPLICABLE CODES AND STANDARDSAll equipment, material and workmanship shall comply with therequirements and latest revisions of thefollowing standards and codes whichever is applicable,BSI - British Standards Institute.NEMA - National Electrical Manufacturers Association.ASTM - American Society for Testing and Materials.
TECHNICAL DATAMANUFACTURING STANDARDS OF CABLE TRAYS
2
Material: Cold Rolled Annealed steel Sheets (ASTM A 36). or Pre-galvanized steel ASTM A 653
Standard Finish: Hot dip galvanized after fabrication to BS EN ISO 1461Alternate Finish: (A) Epoxy Coating (B) Mill galvanized to BS 2989Standard Length: 2.44 meter.
Fast assembly cable tray are available in light and heavy duty variants. Standard sections ex-stock and non-standard or spe-cial forms on Quick turnaround. A full range of bends, tees and accessories Including lids, dividers, supports and clips avail-able. Thickness of material between 1.0 mm to 2.0 mm. Standard height for light duty cable tray is 25 mm and for heavy duty cable tray is 50 mm which can be changed as per customer requirements.
Heavy Duty Cable Traywith Return Flange
Light Duty Cable Traywithout Return Flange
TECHNICAL DATAMANUFACTURING STANDARDS OF CABLE TRAYS
3
CABLE TRAY ACCESSORIES
90 Degree Horizontal Elbow
Tee
4
Crossover
Equal Reducer
CABLE TRAY ACCESSORIES
5
Internal Riser
External Riser
Internal Riser
CABLE TRAY ACCESSORIES
6
Straight Cable Tray Cover
Sunshaded Cable Tray Cover
CABLE TRAY ACCESSORIES
7
Straight Coupler
Bendable Coupler
Expansion Coupler
CABLE TRAY ACCESSORIES
8
CLAMPS
Cover Clamp
Hold Down ClampType - B
Hold Down ClampType - A
48
10
7
2040
20
7
HOLD DOWN CLAMPFOR LADDER TRAY
TYPE - A
h
t
HOLD DOWN CLAMPFOR LADDER TRAY
TYPE - B
3(t)
15 26
10
40
25H
-2
9
CABLE LADDERS
10
90 HORIZONTAL ELBOW
CABLE LADDER ACCESSORIES
90 INSIDE VERTICAL RISER
11
90 OUTSIDE VERTICAL RISER
CABLE LADDER ACCESSORIES
90 HORIZONTAL TEE
12
HORIZONTAL CROSS
REDUCER
CABLE LADDER ACCESSORIES
13
CABLE TRUNKING
14
CABLE LADDER ACCESSORIES
90 DEG. EASY VERTICAL BEND
90 DEG. EASY FLAT BEND
FOUR WAY EASY CROSS
WIDTH
HEI
GH
TWIDTH +150
WIDTH + 150
WIDTH
HEI
GH
T
WIDTH + 150
WIDTH
HEI
GH
T
WIDTH + 150
15
CABLE TRUNKING
COUPLER
90 DEG. EXTERNAL VERTICAL BEND
EQUAL EASY TEE
WIDTH
HEI
GH
T
WIDTH + 300
WIDTH + 150
250
75
H
W
10
10
100
16
CHANNEL SUPPORT SYSTEM
Product Code: SWCSST-1SINGLE TYPE - SOLID
Product Code: SWCSDT-1DOUBLE TYPE
Product Code: SWCSCTCOMBINATION TYPE
41
9.57
41 2.5t
41
9.5
7
822.5t
82
9.5
7
41 2.5t
17
CHANNEL SUPPORT SYSTEM
Product Code:SWCSST-2
Product Code:SWCSDT-2
41
41
9.5
7
41
82
2.5t
2.5t
18
CHANNEL BRACKET
CABLE LADDERS ACCESSORIES
Product Code: SWCCB 1SINGLE CHANNEL BRACKET
Product Code: SWCCB 2DOUBLE CHANNEL BRACKET
19
CHANNEL SUPPORT SYSTEM
Product Code: SWC 4TP4-HOLE TEE PLATE
Product Code: SWC 6DWF6-HOLE DOUBLE WING
FITTING
Product Code: SWCUSUPS“U” SUPPORT (SINGLE)
Product Code: SWC 5CP5-HOLE CROSS PALTE
Product Code: SWC 4AF4-HOLE ANGLE
FITTING
Product Code: SWCUSUPD“U” SUPPORT (DOUBLE)
20
CHANNEL SUPPORT SYSTEM
Code: SWC 4SBL4-HOLE SHELF BRACKET
Code: SWC 6DHF4-HOLE DOUBLE HOLE
FITTING
Code: SWCBCLMP 2BEAM CLAMP
Code: SWC 4SBR4-HOLE SHELF BRACKET
Code: SWCBCLMP 1BEAM CLAMP
Code: SWCBCLMP 3BEAM CLAMP
21
POST BASE FROM SINGLE CHANNEL(PBS)
POST BASE FOR DOUBLE CHANNEL(PBS)
CHANNEL SUPPORT SYSTEM
Product Code: SWCPBS
Product Code: SWCPBS
100
25
20025
25
42
866t
6t
100
50
14x8holes
14x2holes
25
5t 48
50
14x4 holes
14x2 holes
6t
22
CHANNEL SUPPORT SYSTEM
23
DISTRIBUTION BOXES, MODULARBOXER & ACCESSORIES
BYAL-SHAMALI & WARIS CO. W.L.L.
TOWER
Office: Al-Madina Building 3rd Floor - Mubarak Al Kabeer Street - KuwaitTel.: 2436815/6 - Fax: 2403915
E-Mail : [email protected], [email protected]: www.alshamaliwaris.com
24
DISTRIBUTION BOXES (OUTSIDE ENCLOSURE BOX )
25
MODULER ENCLOSURES
26
GI BOXES
27
G.I. SOKET BOXES
GALVANISED ADAPTABLE BOXES
28
ELCB / MCCB BOXES
WEATHER PROOF BOXES
29
CUBICAL BOXES
30
UNDER FLOOR SWITCHSOCKET BOXES
FLOOR DISTRIBUTION SYSTEM
31
CUT OUT BOX
TELEPHONE BOXES
32
ROUND COVER
MAN-HOLE COVER
SQUARE COVER
EXIT BOX