CAT CT13/C15 ENGINEs
ADVANTAGESDriver Comfort—Maximize driver comfort and reduce cab noise and vibration by 30% with the combination of our advanced CGI block and high-pressure multi-shot injection system
Peak Power—Increase productivity and maintain peak power with interstage cooling between turbos
Serviceability—Minimize downtime and make maintenance more convenient with easy-access valve covers and fuel filters
Advanced Fuel System—Reduce in-cylinder emissions, quiet operation noise and improve fuel efficiency thanks to high injection pressure that goes up to 32,000 PSI
CT13 ENGINE475 hp @ 1700 rpm1700 lb.ft @ 1200 rpm PEak TorquE
ENGINE SPECIFICATIONS CT13
Type In-line 6-Cylinder, 4-Stroke-Cycle Diesel
Bore — in (mm) 4.96 (126)
Stroke — in (mm) 6.54 (166)
Displacement — cu in (L) 758 (12.4)
Combustion/Aspiration Dual Sequential Turbochargers, Intercooler & Aftercooler
Compression Ratio 17:1
Maximize fuel efficiency, torque and responsiveness with a high pressure common-rail fuel system, dual wastegated sequential turbos, responsive heat management system and low-friction design
Pull bigger loads with the Carbon Graphite Iron (CGI) lightweight block system that’s up to 220kg lighter than traditional gray iron engines
Increase engine life and performance with the superior strength that comes with advanced CGI technology
Reduce oil consumption and increase longevity with its single piece, gallery-cooled steel pistons
Maintain resilience with significantly larger main bearings, crankcase ladder reinforcement, premium foam-molded wiring harness and precision-machined wet sleeves
•
•
•
•
•
OVErVIEw
C15 ENGINE550 hp @ 2100 rpm1850 lb.ft @ 1200 rpm PEak TorquE
ADVANTAGESMaximum Power—Our most powerful on-highway engine, built to take on your toughest jobs
Efficiency—Increase fuel economy by operating within the range of 1400-1650 rpm at cruise speed with a GCM of up to 90 tonnes
Serviceability—Minimize downtime with easy-access to all components under the bonnet
Advanced Fuel System—Reduce emissions with market leading technology and without the need for EGR or SCR system integration
ENGINE SPECIFICATIONS C15
Type In-line 6-Cylinder, 4-Stroke-Cycle Diesel
Bore — in (mm) 5.4 (137)
Stroke — in (mm) 6.75 (171)
Displacement — cu in (L) 928 (15.2)
Combustion/Aspiration Series Turbocharged
Compression Ratio 17:1
•
•
•
•
•
OVErVIEwChallenge your toughest jobs, day after day, with the proven durability and power that comes with the C15 engine
Reduce running costs with this ADR 80/03 compliant engine, a clear emissions advantage without the need for any after treatment system
Maximize fuel economy and maintain engine performance with dual diesel particulate filters (DPFs), a passive regeneration system
Increase longevity, reduce shock-loading and improve fuel economy with the Cat C15 ACERT dual turbo’s in sequential operation
Lower operating costs with the ‘over and under’ cooling system, enabling the engine to run cooler than most competitive engines
www.cattrucks.com.au®2012 Caterpillar All Rights Reserved Printed in Australia CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
All efforts have been made to ensure the information contained in this document was correct at time of printing or uploading. NC2 Global Australia Pty Ltd reserves the right to alter any details of the specifications and equipment without notice. NC2 Global Australia Pty Ltd in so far as it is permitted by law to do so, shall not be liable in any way as a result of any reliance placed by any person on anything contained in this brochure. You should therefore check with your authorised Cat Trucks dealer at the time of ordering your truck to ensure that colour, specifications, equipment, design features and options are available for the vehicle you are ordering. Please note that some options may only be available in combination with others. Autho-rised Cat Truck dealers will on request from NC2 Global Australia Pty Ltd provide up to date information on all accessories, design features, prices and availability.
PURE PERFORMANCEFor best performance and fuel economy:
Gear it right to get the best results—Maximize fuel economy by operating at a lower engine rpm with our high-torque engines
Practice progressive shifting—Save fuel by shifting up as soon as you have enough rpm to grab the next highest gear
Keep rpm steady—Get better fuel economy by keeping the engine rpm steady manually or with cruise control
Drive confidently knowing your truck will stay on the road with our dealer network offering 24-hour nation-wide support, via the Cat Truck Roadside Assist.For more information, call 1-800-228-007
Peak Torque at Lower rpm475 hp / 1700 lb.ft
CT13 TORqUE CURvEs C15 TORqUE CURvEsPeak Torque at Lower rpm550 hp / 1860 lb.ft
Engine Speed (rpm)
Torq
ue (l
b.ft)
Pow
er (h
p)
1100 1700900 15001300 1900
800
6002100
1000
1200
1400
1600
1800
2000
400
500
600
700
800
900
1000
300
Engine Power (hp) Torque (lb.ft)
Engine Speed (rpm)
Torq
ue (l
b.ft)
Pow
er (h
p)
1100 1700900 15001300 1900
800
6002100
1000
1200
1400
1600
1800
2000
400
500
600
700
800
900
1000
300
Engine Power (hp) Torque (lb.ft)