Size OD & Weight(Nominal) Type
WallThickness
RECOMMENDED MAKE-UP TORQUE
T-95C-90L-80/N-80J-55
Minimum Maximum Maximum Maximum Maximum MaximumMinimum Minimum Minimum Minimum
C-110/P-110
R E D E F I N I N G R E L I A B I L I T Y T M
CS,® PH-6,™ & PH-4™
Tubing ConnectionBULLETIN 9204-C (REPLACES 9204-B)
CS,® PH-6,™ & PH-4™ Torque Values
3/4(1.050 OD) 1.20 CS 0.113 200 300 300 400 300 400 300 400 300 400 3/4(1.050 OD) 1.50 CS 0.154 200 300 300 400 300 400 300 400 300 400 1 (1.315 OD) 1.80 CS 0.133 300 400 400 500 400 500 400 500 400 500 1 (1.315 OD) 2.25 CS 0.179 300 400 400 500 400 500 400 500 400 500
1 1/4(1.660 OD) 2.40 CS 0.140 400 500 600 800 600 800 600 800 600 800 1 1/4(1.660 OD) 3.02 CS 0.191 400 500 600 800 600 800 600 800 600 800 1 1/4(1.660 OD) 3.24 CS 0.198 400 500 600 800 600 800 600 800 600 800 1 1/2(1.900 OD) 2.90 CS 0.145 600 800 800 1000 800 1000 800 1000 800 1000 1 1/2(1.900 OD) 3.64 CS 0.200 600 800 800 1000 800 1000 800 1000 800 1000 1 1/2(1.900 OD) 4.19 CS 0.219 600 800 800 1000 800 1000 800 1000 800 1000
2.063 3.25 CS 0.156 700 900 900 1100 900 1100 900 1100 900 1100 2.063 4.50 CS 0.225 700 900 900 1100 900 1100 900 1100 900 1100 2.375 4.70 CS 0.190 1100 1400 1500 1900 1500 1900 1500 1900 1500 1900 2.375 5.30 CS 0.218 1100 1400 1500 1900 1500 1900 1500 1900 1500 1900 2.375 5.95 PH-6 0.254 2200 2800 2400 3000 2500 3100 2700 3400 2.375 6.20 PH-6 0.261 2200 2800 2400 3000 2500 3100 2700 3400 2.375 6.60 PH-6 0.295 2200 2800 2400 3000 2500 3100 2700 3400 2.375 7.70 PH-6 0.336 2200 2800 2400 3000 2500 3100 2700 3400 2.875 6.50 CS 0.217 1500 1900 2100 2600 2100 2600 2100 2600 2100 2600 2.875 7.90 PH-6 0.276 3000 3800 3200 4000 3300 4100 3500 4400 2.875 8.70 PH-6 0.308 3000 3800 3200 4000 3300 4100 3500 4400 2.875 9.50 PH-6 0.340 4500 5600 4900 6100 5100 6400 5500 6900 2.875 10.70 PH-6 0.392 4500 5600 4900 6100 5100 6400 5500 6900 2.875 11.00 PH-4 0.405 5000 6300 5600 7000 5900 7400 6500 8100 2.875 11.65 PH-4 0.440 5000 6300 5600 7000 5900 7400 6500 8100 3.500 9.20 CS 0.254 2500 3100 3000 3800 3000 3800 3000 3800 3000 3800 3.500 10.30 CS 0.289 2500 3100 3000 3800 3000 3800 3000 3800 3000 3800 3.500 12.95 PH-6 0.375 5500 6900 6100 7600 6400 8000 7000 8800 3.500 14.30 PH-6 0.430 5500 6900 6100 7600 6400 8000 7000 8800 3.500 15.80 PH-6 0.476 5500 6900 6100 7600 6400 8000 7000 8800 3.500 16.70 PH-4 0.510 7500 9400 8300 10400 8700 10900 9500 11900 3.500 17.05 PH-4 0.530 8000 10000 8800 11000 9200 11500 10000 12500 4.000 11.00 CS 0.262 3000 3800 3500 4400 3500 4400 3500 4400 3500 4400 4.000 13.40 PH-6 0.330 5500 6900 6100 7600 6400 8000 7000 8800 4.000 16.10 PH-6 0.415 5500 6900 6100 7600 6400 8000 7000 8800 4.000 19.00 PH-4 0.500 8500 10600 9300 11600 9700 12100 10500 13100 4.000 21.10 PH-4 0.562 9000 11300 9800 12300 10200 12800 11000 13800 4.000 22.50 PH-4 0.610 9500 11900 10300 12900 10700 13400 11500 14400 4.500 12.75 CS 0.271 3500 4400 4500 5600 4500 5600 4500 5600 4500 5600 4.500 13.50 CS 0.290 3500 4400 4500 5600 4500 5600 4500 5600 4500 5600 4.500 15.50 PH-6 0.337 6000 7500 6600 8300 6900 8600 7500 9400 4.500 17.00 PH-6 0.380 6700 8400 7400 9300 7700 9600 8400 10500 4.500 19.20 PH-6 0.430 7500 9400 8300 10400 8700 10900 9500 11900 4.500 21.60 PH-4 0.500 9500 11900 10500 13100 11000 13800 12000 15000 4.500 24.00 PH-4 0.560 10000 12500 11200 14000 11800 14800 13000 16300 4.500 26.50 PH-4 0.630 11500 14400 12700 15900 13300 16600 14500 18100 5.000 18.00 CS 0.362 5000 6300 6900 8600 7700 9600 8100 10100 9200 11500 5.000 20.30 CS 0.408 5200 6500 7100 8900 7900 9900 8300 10400 9400 11800 5.000 21.40 CS 0.437 5900 7400 8000 10000 8900 11100 9400 11800 10600 13300 5.000 23.20 CS 0.478 6900 8600 9500 11900 10500 13100 11000 13800 12500 15600 5.000 24.10 CS 0.500 7000 8800 9600 12000 10600 13300 11100 13900 12600 15800 5.000 27.00 CS 0.560 7300 9100 9900 12400 10900 13600 11400 14300 12900 16100 5.500 17.00 CS 0.304 4200 5300 5800 7300 6400 8000 6800 8500 7700 9600 5.500 20.00 CS 0.361 6200 7800 8500 10600 9400 11800 9900 12400 11200 14000 5.500 23.00 CS 0.415 6500 8100 8800 11000 9700 12100 10200 12800 11600 14500 5.500 26.00 CS 0.476 8500 10600 11500 14400 12800 16000 13400 16800 15200 19000 5.500 26.80 CS 0.500 8600 10800 11700 14600 12900 16100 13500 16900 15400 19300 5.500 28.40 CS 0.530 8800 11000 11900 14900 13100 16400 13700 17100 15600 19500 6.625 28.00 CS 0.417 9800 12300 13600 17000 15200 19000 15900 19900 18200 22800 6.625 32.00 CS 0.475 10300 12900 14100 17600 15600 19500 16400 20500 18700 23400 6.625 33.00 CS 0.500 10500 13100 14300 17900 15800 19800 16600 20800 18900 23600 6.625 34.50 CS 0.525 10700 13400 14500 18100 16000 20000 16800 21000 19100 23900 7.000 29.00 CS 0.408 10800 13500 15000 18800 16800 21000 17600 22000 20200 25300 7.000 32.00 CS 0.453 11100 13900 15400 19300 17100 21400 18000 22500 20500 25600 7.000 35.00 CS 0.498 11500 14400 15800 19800 17500 21900 18300 22900 20900 26100 7.000 38.00 CS 0.540 14500 18100 19900 24900 22100 27600 23200 29000 26500 33100 7.000 41.00 CS 0.590 14900 18600 20400 25500 22500 28100 23600 29500 26900 33600
Recommended torque values for the CB and non-CB products are the same.
HYDRIL HYDRIL INTERNATIONAL TUBULAR SALESHouston, Texas Aberdeen, ScotlandTelephone: 281.985.3412 Telephone: +44.1224.299.554Fax: 281.985.3376 Fax: +44.1224.299.578E-mail: [email protected] www.hydril.com E-mail: [email protected]
Inches Lbs/Ft Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-LbsInches
ThreadsPer Inch
Make-UpLossID
All CS and CS-CB connections of any given size are interchangeable.All PH-6 and PH-6-CB connections of any given size are interchangeable.All PH-4 and PH-4-CB connections of any given size are interchangeable.The CB feature is not available in 3/4” and 1”.
CS,® PH-6,™ & PH-4™ Performance DataCS,® PH-6,™ & PH-4™ FeaturesThe Worldwide Performance Standard for Production Tubing and Workstring Applications
Inches Lbs/Ft Inches 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 LbsInches InchesInches Inches InchesInches
Size OD & Weight(Nominal)
PIPE CONNECTION PIPE BODY YIELD STRENGTH(Connection exceeds pipe body)Turned OD
Drift SpecialClearance
I.D.(Nominal)Type
WallThickness Standard J-55 L-80/
N-80 C-90 T-95C-110/P-110
3/4(1.050 OD) 1.20 CS 0.113 0.824 0.672 1.327 1.300 0.687 2.22 8 18 27 30 32 373/4(1.050 OD) 1.50 CS 0.154 0.742 0.648 1.327 0.687 2.22 8 24 35 39 41 48
1 (1.315 OD) 1.80 CS 0.133 1.049 0.955 1.552 1.525 0.970 2.22 8 27 40 44 47 541 (1.315 OD) 2.25 CS 0.179 0.957 0.848 1.600 0.864 2.22 8 35 51 57 61 70
1 1/4(1.660 OD) 2.40 CS 0.140 1.380 1.286 1.883 1.858 1.312 2.22 8 37 53 60 64 741 1/4(1.660 OD) 3.02 CS 0.191 1.278 1.184 1.927 1.218 2.22 8 48 71 79 84 971 1/4(1.660 OD) 3.24 CS 0.198 1.264 1.170 1.927 1.200 2.22 8 50 73 82 86 100
1 1/2(1.900 OD) 2.90 CS 0.145 1.610 1.516 2.113 2.094 1.530 2.22 8 44 64 72 76 881 1/2(1.900 OD) 3.64 CS 0.200 1.500 1.406 2.162 1.440 2.22 8 59 85 96 101 1171 1/2(1.900 OD) 4.19 CS 0.219 1.462 1.368 2.179 1.390 2.22 8 64 93 104 110 127
2.063 3.25 CS 0.156 1.751 1.657 2.330 2.295 1.700 2.23 8 51 75 84 89 1032.063 4.50 CS 0.225 1.613 1.519 2.460 2.407 1.550 2.23 8 71 104 117 123 143
2.375 4.70 CS 0.190 1.995 1.901 2.700 2.655 1.945 2.31 8 72 104 117 124 1432.375 5.30 CS 0.218 1.939 1.845 2.750 2.700 1.890 2.31 8 81 118 133 140 1622.375 5.95 PH-6 0.254 1.867 1.773 2.906 2.782 1.805 3.05 6 93 135 152 161 1862.375 6.20 PH-6 0.261 1.853 1.759 2.938 2.794 1.795 3.05 6 95 139 156 165 1912.375 6.60 PH-6 0.295 1.785 1.691 3.032 2.854 1.725 3.05 6 106 154 173 183 2122.375 7.70 PH-6 0.336 1.703 1.609 3.125 2.924 1.645 3.05 6 118 172 194 204 237
2.875 6.50 CS 0.217 2.441 2.347 3.210 3.166 2.371 2.39 8 100 145 163 172 1992.875 7.90 PH-6 0.276 2.323 2.229 3.438 3.312 2.265 3.04 6 124 180 203 214 2482.875 8.70 PH-6 0.308 2.259 2.165 3.500 3.365 2.200 3.04 6 137 199 224 236 2732.875 9.50 PH-6 0.340 2.195 2.101 3.625 3.419 2.130 3.03 6 149 217 244 257 2982.875 10.70 PH-6 0.392 2.091 1.997 3.688 3.509 2.030 3.02 6 168 245 275 290 3362.875 11.00 PH-4 0.405 2.065 1.971 3.750 2.000 4.23 4 173 251 283 299 3462.875 11.65 PH-4 0.440 1.995 1.901 3.750 1.945 4.23 4 185 269 303 320 370
3.500 9.20 CS 0.254 2.992 2.867 3.915 3.859 2.920 2.84 8 142 207 233 246 2853.500 10.30 CS 0.289 2.922 2.797 3.915 2.870 2.84 8 160 233 262 277 3213.500 12.95 PH-6 0.375 2.750 2.625 4.313 4.189 2.687 3.35 6 202 295 331 350 4053.500 14.30 PH-6 0.430 2.640 2.515 4.410 4.287 2.550 3.35 6 228 332 373 394 4563.500 15.80 PH-6 0.476 2.548 2.423 4.500 4.367 2.485 3.34 6 249 362 407 430 4973.500 16.70 PH-4 0.510 2.480 2.355 4.500 2.406 4.24 4 263 383 431 455 5273.500 17.05 PH-4 0.530 2.440 2.315 4.563 2.375 4.24 4 272 396 445 470 544
4.000 11.00 CS 0.262 3.476 3.351 4.417 4.359 3.395 2.84 8 169 246 277 292 3384.000 13.40 PH-6 0.330 3.340 3.215 4.625 4.514 3.275 3.32 6 209 304 342 361 4194.000 16.10 PH-6 0.415 3.170 3.045 4.765 4.655 3.080 3.31 6 257 374 421 444 5144.000 19.00 PH-4 0.500 3.000 2.875 5.000 2.920 4.76 4 302 440 495 522 6054.000 21.10 PH-4 0.562 2.876 2.751 5.090 2.795 4.76 4 334 486 546 577 6684.000 22.50 PH-4 0.610 2.780 2.655 5.188 2.700 4.76 4 357 520 585 617 715
4.500 12.75 CS 0.271 3.958 3.833 4.920 4.861 3.865 2.89 8 198 288 324 342 3964.500 13.50 CS 0.290 3.920 3.795 4.955 4.890 3.840 2.89 8 211 307 345 364 4224.500 15.50 PH-6 0.337 3.826 3.701 5.125 5.021 3.765 3.34 6 242 353 397 419 4854.500 17.00 PH-6 0.380 3.740 3.615 5.210 5.091 3.650 3.34 6 271 393 443 467 5414.500 19.20 PH-6 0.430 3.640 3.515 5.313 5.170 3.560 3.34 6 302 440 495 522 6054.500 21.60 PH-4 0.500 3.500 3.375 5.500 3.420 4.76 4 346 503 565 597 6914.500 24.00 PH-4 0.560 3.380 3.255 5.563 3.300 4.76 4 381 555 624 659 7624.500 26.50 PH-4 0.630 3.240 3.115 5.688 3.160 4.76 4 421 613 689 728 843
5.000 18.00 CS 0.362 4.276 4.151 5.515 4.196 5.27 4 290 422 475 501 5805.000 20.30 CS 0.408 4.184 4.059 5.585 4.104 5.27 4 324 471 530 559 6475.000 21.40 CS 0.437 4.126 4.001 5.630 4.046 5.27 4 345 501 564 595 6895.000 23.20 CS 0.478 4.044 3.919 5.700 3.964 5.27 4 373 543 611 645 7475.000 24.10 CS 0.500 4.000 3.875 5.735 3.920 5.27 4 389 565 636 672 7785.000 27.00 CS 0.560 3.880 3.755 5.835 3.800 5.27 4 430 625 703 742 859
5.500 17.00 CS 0.304 4.892 4.767 5.920 4.812 5.27 4 273 397 447 471 5465.500 20.00 CS 0.361 4.778 4.653 6.005 4.698 5.27 4 321 466 525 554 6415.500 23.00 CS 0.415 4.670 4.545 6.090 4.590 5.27 4 365 530 597 630 7295.500 26.00 CS 0.476 4.548 4.423 6.185 4.468 5.27 4 413 601 676 714 8265.500 26.80 CS 0.500 4.500 4.375 6.225 4.420 5.27 4 432 628 707 746 8645.500 28.40 CS 0.530 4.440 4.315 6.275 4.360 5.27 4 455 662 745 786 910
6.625 28.00 CS 0.417 5.791 5.666 7.210 5.710 5.26 4 447 651 732 773 8956.625 32.00 CS 0.475 5.675 5.550 7.300 5.595 5.26 4 505 734 826 872 10106.625 33.00 CS 0.500 5.625 5.500 7.340 5.545 5.26 4 529 770 866 914 10586.625 34.50 CS 0.525 5.575 5.450 7.380 5.495 5.26 4 553 805 905 956 1107
7.000 29.00 CS 0.408 6.184 6.059 7.570 6.104 5.28 4 465 676 760 803 9297.000 32.00 CS 0.453 6.094 5.969 7.640 6.014 5.28 4 512 745 839 885 10257.000 35.00 CS 0.498 6.004 5.879 7.710 5.924 5.28 4 559 814 916 966 11197.000 38.00 CS 0.540 5.920 5.795 7.775 5.840 5.28 4 603 877 986 1041 12067.000 41.00 CS 0.590 5.820 5.695 7.855 5.740 5.28 4 653 950 1069 1129 1307
H2S service suitability isensured by combining the lowstress profile of non-interferencethreads with fixed make-up posi-tion control of a shouldered con-nection.
Trouble-free make-up is routinewith Hydril’s two-step, non-inter-ference thread style. Machiningthe threads on two different diam-eters provides very deep stabbingfor stable make-up alignment.
Reserve torque strength is pro-vided by the 90° intermediateshoulder. Close tolerance controlbetween shoulders ensures theintermediate will function as a sec-ondary shoulder.
Superior galling resistance ofthe non-interference thread profilehas been proven in numerousinstallations of 9% and 13%chromium stainless steel strings.
Corrosion protection continuityis provided by the optional CB fea-ture. The virtually inert CB ring cre-ates the corrosion resistant bridgebetween pin and box plastic coat-ing without detracting from overallconnection performance. The pro-tected location of the CB ringalong with the controlled“squeeze” on make-up allow multi-ple trips without replacing the ring.
Improved connection coat-ability is provided by the IDchamfers which eliminate thesharp plastic coated corners sus-ceptible to chipping.
Multiple string completionsand hang-up free running areensured by the streamlined ODconfiguration of the upset andhaving the same turned OD ofboth pin and box.
PIN
BOX
©2006 Hydril Company LP All Rights Reserved
With a worldwide reputation fordurability, CS, PH-6, and PH-4are unmatched for production aswell as workstring applicationssuch as drilling cement, milling,fishing, and high pressure drillstem testing.This durability is produced by combining thereusability of non-interferencethreads, metal seals, and substan-tial torque shoulders.
100% pipe body tensionstrength is produced by machin-ing pin and box on a hot-forgedupset. Connection critical areasexceed the pipe body area.
High torque strength is providedby the 30° reverse angle shoulder.This positive torque stop ensuresthe connection makes up to thesame position every time. Theshoulder also provides excellentresistance to compression andbending loads. Preload applied tothe shoulder and thread loadflanks during make-up allows theconnection to withstand high loadswithout danger of unseating theseals.
The 100% external pressureseal is created at the torque shoul-der. This metal seal also provides apressure energized secondaryinternal pressure seal.
Metal-to-metal internal pressureseal is rated at 100% of the pipebody. The compound pressureenergizing produces a highly reli-able high pressure gas-tight seal.
Special clearance OD retains100% tension and pressure ratings.
Flowstream continuity is main-tained with the bored ID andrecess-free bore configuration.The erosion-corrosion associatedwith a turbulent flowstream is minimized.
U.S. and foreign patents apply.
ThreadsPer Inch
Make-UpLossID
All CS and CS-CB connections of any given size are interchangeable.All PH-6 and PH-6-CB connections of any given size are interchangeable.All PH-4 and PH-4-CB connections of any given size are interchangeable.The CB feature is not available in 3/4” and 1”.
CS,® PH-6,™ & PH-4™ Performance DataCS,® PH-6,™ & PH-4™ FeaturesThe Worldwide Performance Standard for Production Tubing and Workstring Applications
Inches Lbs/Ft Inches 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 LbsInches InchesInches Inches InchesInches
Size OD & Weight(Nominal)
PIPE CONNECTION PIPE BODY YIELD STRENGTH(Connection exceeds pipe body)Turned OD
Drift SpecialClearance
I.D.(Nominal)Type
WallThickness Standard J-55 L-80/
N-80 C-90 T-95C-110/P-110
3/4(1.050 OD) 1.20 CS 0.113 0.824 0.672 1.327 1.300 0.687 2.22 8 18 27 30 32 373/4(1.050 OD) 1.50 CS 0.154 0.742 0.648 1.327 0.687 2.22 8 24 35 39 41 48
1 (1.315 OD) 1.80 CS 0.133 1.049 0.955 1.552 1.525 0.970 2.22 8 27 40 44 47 541 (1.315 OD) 2.25 CS 0.179 0.957 0.848 1.600 0.864 2.22 8 35 51 57 61 70
1 1/4(1.660 OD) 2.40 CS 0.140 1.380 1.286 1.883 1.858 1.312 2.22 8 37 53 60 64 741 1/4(1.660 OD) 3.02 CS 0.191 1.278 1.184 1.927 1.218 2.22 8 48 71 79 84 971 1/4(1.660 OD) 3.24 CS 0.198 1.264 1.170 1.927 1.200 2.22 8 50 73 82 86 100
1 1/2(1.900 OD) 2.90 CS 0.145 1.610 1.516 2.113 2.094 1.530 2.22 8 44 64 72 76 881 1/2(1.900 OD) 3.64 CS 0.200 1.500 1.406 2.162 1.440 2.22 8 59 85 96 101 1171 1/2(1.900 OD) 4.19 CS 0.219 1.462 1.368 2.179 1.390 2.22 8 64 93 104 110 127
2.063 3.25 CS 0.156 1.751 1.657 2.330 2.295 1.700 2.23 8 51 75 84 89 1032.063 4.50 CS 0.225 1.613 1.519 2.460 2.407 1.550 2.23 8 71 104 117 123 143
2.375 4.70 CS 0.190 1.995 1.901 2.700 2.655 1.945 2.31 8 72 104 117 124 1432.375 5.30 CS 0.218 1.939 1.845 2.750 2.700 1.890 2.31 8 81 118 133 140 1622.375 5.95 PH-6 0.254 1.867 1.773 2.906 2.782 1.805 3.05 6 93 135 152 161 1862.375 6.20 PH-6 0.261 1.853 1.759 2.938 2.794 1.795 3.05 6 95 139 156 165 1912.375 6.60 PH-6 0.295 1.785 1.691 3.032 2.854 1.725 3.05 6 106 154 173 183 2122.375 7.70 PH-6 0.336 1.703 1.609 3.125 2.924 1.645 3.05 6 118 172 194 204 237
2.875 6.50 CS 0.217 2.441 2.347 3.210 3.166 2.371 2.39 8 100 145 163 172 1992.875 7.90 PH-6 0.276 2.323 2.229 3.438 3.312 2.265 3.04 6 124 180 203 214 2482.875 8.70 PH-6 0.308 2.259 2.165 3.500 3.365 2.200 3.04 6 137 199 224 236 2732.875 9.50 PH-6 0.340 2.195 2.101 3.625 3.419 2.130 3.03 6 149 217 244 257 2982.875 10.70 PH-6 0.392 2.091 1.997 3.688 3.509 2.030 3.02 6 168 245 275 290 3362.875 11.00 PH-4 0.405 2.065 1.971 3.750 2.000 4.23 4 173 251 283 299 3462.875 11.65 PH-4 0.440 1.995 1.901 3.750 1.945 4.23 4 185 269 303 320 370
3.500 9.20 CS 0.254 2.992 2.867 3.915 3.859 2.920 2.84 8 142 207 233 246 2853.500 10.30 CS 0.289 2.922 2.797 3.915 2.870 2.84 8 160 233 262 277 3213.500 12.95 PH-6 0.375 2.750 2.625 4.313 4.189 2.687 3.35 6 202 295 331 350 4053.500 14.30 PH-6 0.430 2.640 2.515 4.410 4.287 2.550 3.35 6 228 332 373 394 4563.500 15.80 PH-6 0.476 2.548 2.423 4.500 4.367 2.485 3.34 6 249 362 407 430 4973.500 16.70 PH-4 0.510 2.480 2.355 4.500 2.406 4.24 4 263 383 431 455 5273.500 17.05 PH-4 0.530 2.440 2.315 4.563 2.375 4.24 4 272 396 445 470 544
4.000 11.00 CS 0.262 3.476 3.351 4.417 4.359 3.395 2.84 8 169 246 277 292 3384.000 13.40 PH-6 0.330 3.340 3.215 4.625 4.514 3.275 3.32 6 209 304 342 361 4194.000 16.10 PH-6 0.415 3.170 3.045 4.765 4.655 3.080 3.31 6 257 374 421 444 5144.000 19.00 PH-4 0.500 3.000 2.875 5.000 2.920 4.76 4 302 440 495 522 6054.000 21.10 PH-4 0.562 2.876 2.751 5.090 2.795 4.76 4 334 486 546 577 6684.000 22.50 PH-4 0.610 2.780 2.655 5.188 2.700 4.76 4 357 520 585 617 715
4.500 12.75 CS 0.271 3.958 3.833 4.920 4.861 3.865 2.89 8 198 288 324 342 3964.500 13.50 CS 0.290 3.920 3.795 4.955 4.890 3.840 2.89 8 211 307 345 364 4224.500 15.50 PH-6 0.337 3.826 3.701 5.125 5.021 3.765 3.34 6 242 353 397 419 4854.500 17.00 PH-6 0.380 3.740 3.615 5.210 5.091 3.650 3.34 6 271 393 443 467 5414.500 19.20 PH-6 0.430 3.640 3.515 5.313 5.170 3.560 3.34 6 302 440 495 522 6054.500 21.60 PH-4 0.500 3.500 3.375 5.500 3.420 4.76 4 346 503 565 597 6914.500 24.00 PH-4 0.560 3.380 3.255 5.563 3.300 4.76 4 381 555 624 659 7624.500 26.50 PH-4 0.630 3.240 3.115 5.688 3.160 4.76 4 421 613 689 728 843
5.000 18.00 CS 0.362 4.276 4.151 5.515 4.196 5.27 4 290 422 475 501 5805.000 20.30 CS 0.408 4.184 4.059 5.585 4.104 5.27 4 324 471 530 559 6475.000 21.40 CS 0.437 4.126 4.001 5.630 4.046 5.27 4 345 501 564 595 6895.000 23.20 CS 0.478 4.044 3.919 5.700 3.964 5.27 4 373 543 611 645 7475.000 24.10 CS 0.500 4.000 3.875 5.735 3.920 5.27 4 389 565 636 672 7785.000 27.00 CS 0.560 3.880 3.755 5.835 3.800 5.27 4 430 625 703 742 859
5.500 17.00 CS 0.304 4.892 4.767 5.920 4.812 5.27 4 273 397 447 471 5465.500 20.00 CS 0.361 4.778 4.653 6.005 4.698 5.27 4 321 466 525 554 6415.500 23.00 CS 0.415 4.670 4.545 6.090 4.590 5.27 4 365 530 597 630 7295.500 26.00 CS 0.476 4.548 4.423 6.185 4.468 5.27 4 413 601 676 714 8265.500 26.80 CS 0.500 4.500 4.375 6.225 4.420 5.27 4 432 628 707 746 8645.500 28.40 CS 0.530 4.440 4.315 6.275 4.360 5.27 4 455 662 745 786 910
6.625 28.00 CS 0.417 5.791 5.666 7.210 5.710 5.26 4 447 651 732 773 8956.625 32.00 CS 0.475 5.675 5.550 7.300 5.595 5.26 4 505 734 826 872 10106.625 33.00 CS 0.500 5.625 5.500 7.340 5.545 5.26 4 529 770 866 914 10586.625 34.50 CS 0.525 5.575 5.450 7.380 5.495 5.26 4 553 805 905 956 1107
7.000 29.00 CS 0.408 6.184 6.059 7.570 6.104 5.28 4 465 676 760 803 9297.000 32.00 CS 0.453 6.094 5.969 7.640 6.014 5.28 4 512 745 839 885 10257.000 35.00 CS 0.498 6.004 5.879 7.710 5.924 5.28 4 559 814 916 966 11197.000 38.00 CS 0.540 5.920 5.795 7.775 5.840 5.28 4 603 877 986 1041 12067.000 41.00 CS 0.590 5.820 5.695 7.855 5.740 5.28 4 653 950 1069 1129 1307
H2S service suitability isensured by combining the lowstress profile of non-interferencethreads with fixed make-up posi-tion control of a shouldered con-nection.
Trouble-free make-up is routinewith Hydril’s two-step, non-inter-ference thread style. Machiningthe threads on two different diam-eters provides very deep stabbingfor stable make-up alignment.
Reserve torque strength is pro-vided by the 90° intermediateshoulder. Close tolerance controlbetween shoulders ensures theintermediate will function as a sec-ondary shoulder.
Superior galling resistance ofthe non-interference thread profilehas been proven in numerousinstallations of 9% and 13%chromium stainless steel strings.
Corrosion protection continuityis provided by the optional CB fea-ture. The virtually inert CB ring cre-ates the corrosion resistant bridgebetween pin and box plastic coat-ing without detracting from overallconnection performance. The pro-tected location of the CB ringalong with the controlled“squeeze” on make-up allow multi-ple trips without replacing the ring.
Improved connection coat-ability is provided by the IDchamfers which eliminate thesharp plastic coated corners sus-ceptible to chipping.
Multiple string completionsand hang-up free running areensured by the streamlined ODconfiguration of the upset andhaving the same turned OD ofboth pin and box.
PIN
BOX
©2006 Hydril Company LP All Rights Reserved
With a worldwide reputation fordurability, CS, PH-6, and PH-4are unmatched for production aswell as workstring applicationssuch as drilling cement, milling,fishing, and high pressure drillstem testing.This durability is produced by combining thereusability of non-interferencethreads, metal seals, and substan-tial torque shoulders.
100% pipe body tensionstrength is produced by machin-ing pin and box on a hot-forgedupset. Connection critical areasexceed the pipe body area.
High torque strength is providedby the 30° reverse angle shoulder.This positive torque stop ensuresthe connection makes up to thesame position every time. Theshoulder also provides excellentresistance to compression andbending loads. Preload applied tothe shoulder and thread loadflanks during make-up allows theconnection to withstand high loadswithout danger of unseating theseals.
The 100% external pressureseal is created at the torque shoul-der. This metal seal also provides apressure energized secondaryinternal pressure seal.
Metal-to-metal internal pressureseal is rated at 100% of the pipebody. The compound pressureenergizing produces a highly reli-able high pressure gas-tight seal.
Special clearance OD retains100% tension and pressure ratings.
Flowstream continuity is main-tained with the bored ID andrecess-free bore configuration.The erosion-corrosion associatedwith a turbulent flowstream is minimized.
U.S. and foreign patents apply.
Size OD & Weight(Nominal) Type
WallThickness
RECOMMENDED MAKE-UP TORQUE
T-95C-90L-80/N-80J-55
Minimum Maximum Maximum Maximum Maximum MaximumMinimum Minimum Minimum Minimum
C-110/P-110
R E D E F I N I N G R E L I A B I L I T Y T M
CS,® PH-6,™ & PH-4™
Tubing ConnectionBULLETIN 9204-C (REPLACES 9204-B)
CS,® PH-6,™ & PH-4™ Torque Values
3/4(1.050 OD) 1.20 CS 0.113 200 300 300 400 300 400 300 400 300 400 3/4(1.050 OD) 1.50 CS 0.154 200 300 300 400 300 400 300 400 300 400 1 (1.315 OD) 1.80 CS 0.133 300 400 400 500 400 500 400 500 400 500 1 (1.315 OD) 2.25 CS 0.179 300 400 400 500 400 500 400 500 400 500
1 1/4(1.660 OD) 2.40 CS 0.140 400 500 600 800 600 800 600 800 600 800 1 1/4(1.660 OD) 3.02 CS 0.191 400 500 600 800 600 800 600 800 600 800 1 1/4(1.660 OD) 3.24 CS 0.198 400 500 600 800 600 800 600 800 600 800 1 1/2(1.900 OD) 2.90 CS 0.145 600 800 800 1000 800 1000 800 1000 800 1000 1 1/2(1.900 OD) 3.64 CS 0.200 600 800 800 1000 800 1000 800 1000 800 1000 1 1/2(1.900 OD) 4.19 CS 0.219 600 800 800 1000 800 1000 800 1000 800 1000
2.063 3.25 CS 0.156 700 900 900 1100 900 1100 900 1100 900 1100 2.063 4.50 CS 0.225 700 900 900 1100 900 1100 900 1100 900 1100 2.375 4.70 CS 0.190 1100 1400 1500 1900 1500 1900 1500 1900 1500 1900 2.375 5.30 CS 0.218 1100 1400 1500 1900 1500 1900 1500 1900 1500 1900 2.375 5.95 PH-6 0.254 2200 2800 2400 3000 2500 3100 2700 3400 2.375 6.20 PH-6 0.261 2200 2800 2400 3000 2500 3100 2700 3400 2.375 6.60 PH-6 0.295 2200 2800 2400 3000 2500 3100 2700 3400 2.375 7.70 PH-6 0.336 2200 2800 2400 3000 2500 3100 2700 3400 2.875 6.50 CS 0.217 1500 1900 2100 2600 2100 2600 2100 2600 2100 2600 2.875 7.90 PH-6 0.276 3000 3800 3200 4000 3300 4100 3500 4400 2.875 8.70 PH-6 0.308 3000 3800 3200 4000 3300 4100 3500 4400 2.875 9.50 PH-6 0.340 4500 5600 4900 6100 5100 6400 5500 6900 2.875 10.70 PH-6 0.392 4500 5600 4900 6100 5100 6400 5500 6900 2.875 11.00 PH-4 0.405 5000 6300 5600 7000 5900 7400 6500 8100 2.875 11.65 PH-4 0.440 5000 6300 5600 7000 5900 7400 6500 8100 3.500 9.20 CS 0.254 2500 3100 3000 3800 3000 3800 3000 3800 3000 3800 3.500 10.30 CS 0.289 2500 3100 3000 3800 3000 3800 3000 3800 3000 3800 3.500 12.95 PH-6 0.375 5500 6900 6100 7600 6400 8000 7000 8800 3.500 14.30 PH-6 0.430 5500 6900 6100 7600 6400 8000 7000 8800 3.500 15.80 PH-6 0.476 5500 6900 6100 7600 6400 8000 7000 8800 3.500 16.70 PH-4 0.510 7500 9400 8300 10400 8700 10900 9500 11900 3.500 17.05 PH-4 0.530 8000 10000 8800 11000 9200 11500 10000 12500 4.000 11.00 CS 0.262 3000 3800 3500 4400 3500 4400 3500 4400 3500 4400 4.000 13.40 PH-6 0.330 5500 6900 6100 7600 6400 8000 7000 8800 4.000 16.10 PH-6 0.415 5500 6900 6100 7600 6400 8000 7000 8800 4.000 19.00 PH-4 0.500 8500 10600 9300 11600 9700 12100 10500 13100 4.000 21.10 PH-4 0.562 9000 11300 9800 12300 10200 12800 11000 13800 4.000 22.50 PH-4 0.610 9500 11900 10300 12900 10700 13400 11500 14400 4.500 12.75 CS 0.271 3500 4400 4500 5600 4500 5600 4500 5600 4500 5600 4.500 13.50 CS 0.290 3500 4400 4500 5600 4500 5600 4500 5600 4500 5600 4.500 15.50 PH-6 0.337 6000 7500 6600 8300 6900 8600 7500 9400 4.500 17.00 PH-6 0.380 6700 8400 7400 9300 7700 9600 8400 10500 4.500 19.20 PH-6 0.430 7500 9400 8300 10400 8700 10900 9500 11900 4.500 21.60 PH-4 0.500 9500 11900 10500 13100 11000 13800 12000 15000 4.500 24.00 PH-4 0.560 10000 12500 11200 14000 11800 14800 13000 16300 4.500 26.50 PH-4 0.630 11500 14400 12700 15900 13300 16600 14500 18100 5.000 18.00 CS 0.362 5000 6300 6900 8600 7700 9600 8100 10100 9200 11500 5.000 20.30 CS 0.408 5200 6500 7100 8900 7900 9900 8300 10400 9400 11800 5.000 21.40 CS 0.437 5900 7400 8000 10000 8900 11100 9400 11800 10600 13300 5.000 23.20 CS 0.478 6900 8600 9500 11900 10500 13100 11000 13800 12500 15600 5.000 24.10 CS 0.500 7000 8800 9600 12000 10600 13300 11100 13900 12600 15800 5.000 27.00 CS 0.560 7300 9100 9900 12400 10900 13600 11400 14300 12900 16100 5.500 17.00 CS 0.304 4200 5300 5800 7300 6400 8000 6800 8500 7700 9600 5.500 20.00 CS 0.361 6200 7800 8500 10600 9400 11800 9900 12400 11200 14000 5.500 23.00 CS 0.415 6500 8100 8800 11000 9700 12100 10200 12800 11600 14500 5.500 26.00 CS 0.476 8500 10600 11500 14400 12800 16000 13400 16800 15200 19000 5.500 26.80 CS 0.500 8600 10800 11700 14600 12900 16100 13500 16900 15400 19300 5.500 28.40 CS 0.530 8800 11000 11900 14900 13100 16400 13700 17100 15600 19500 6.625 28.00 CS 0.417 9800 12300 13600 17000 15200 19000 15900 19900 18200 22800 6.625 32.00 CS 0.475 10300 12900 14100 17600 15600 19500 16400 20500 18700 23400 6.625 33.00 CS 0.500 10500 13100 14300 17900 15800 19800 16600 20800 18900 23600 6.625 34.50 CS 0.525 10700 13400 14500 18100 16000 20000 16800 21000 19100 23900 7.000 29.00 CS 0.408 10800 13500 15000 18800 16800 21000 17600 22000 20200 25300 7.000 32.00 CS 0.453 11100 13900 15400 19300 17100 21400 18000 22500 20500 25600 7.000 35.00 CS 0.498 11500 14400 15800 19800 17500 21900 18300 22900 20900 26100 7.000 38.00 CS 0.540 14500 18100 19900 24900 22100 27600 23200 29000 26500 33100 7.000 41.00 CS 0.590 14900 18600 20400 25500 22500 28100 23600 29500 26900 33600
Recommended torque values for the CB and non-CB products are the same.
HYDRIL HYDRIL INTERNATIONAL TUBULAR SALESHouston, Texas Aberdeen, ScotlandTelephone: 281.985.3412 Telephone: +44.1224.299.554Fax: 281.985.3376 Fax: +44.1224.299.578E-mail: [email protected] www.hydril.com E-mail: [email protected]
Inches Lbs/Ft Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-LbsInches
