CP SYSTEM PRODUCTS
SUBJECT
INSTRUCTION OF COMPANY -. Company History -. Company Organization -. Overseas Distributor status -. Certificates
2
`
CP SYSTEM
CP SYSEM HISTORY
3
`
Introduction of Company
YEAR HISTORY DETAIL REMARKS
1993 Established CP SYSTEM
1997 Completed development of Non-Metal Nylon(PA6) and connector for the first time in Korea
1999 Acquired Patent for Cable Chains
2000 Incorporated to “CP System Co., Ltd” / ISO 9001 Certified
2001-2005 Acquired VDE(CE), BSS 7239, ASTM E662-01, E162-98, TUV, IPA CP, CPS
2006 Acquired Patent for Clean room type Chain, sabin chain sb-CR
2007 Patent for RoBo-Kit, TUV certificate
2008 Single PPM Certification sb-N,E
2009 Revolving chain Patent sb-S
2011 Certificate of Reliability nsb-CR,N,E / ST-N
2012 Shift chain & nsb chain sales promotion ST-E,S
ORGANIZATION
4
`
Introduction of Company
OVERSEAS AGENCY
5
`
▶ About 50 Distributors in the world
▶ Branch Offices in China & Japan
▶ For new inquiry, we forward to our distributors because CPS prefers to cooperate with our distributors.
Introduction of Company
CERTIFICATES / Industrial Property
6
`
Clean Room Sliding Enclosed RoBo-Kit
Revolving Chain Shift Chain New Sabin Chain Helix Chain
Introduction of Company
CERTIFICATES / System
7
`
ISO 9001 ISO 14001 Single PPM
INNO-BIZ
R&D Dept. Management innovation
Component Master
Venture com.
Introduction of Company
CERTIFICATES / Product
8
`
UL Sabin CHAIN–ATEX
CPSFIX-ATEX
CPSFIX-ATEX
IPA TUV-Sabin chain
TUV-cable chain
VDE
Introduction of Company
CERTIFICATES / Product
9
`
EC CE RoHS BSI
▶For more detail information, please inquire, request and have the copy of certificates from headquarter.
Introduction of Company
10
`SERIES CERTIFICATES TEST FOR ORGANIZATION Date
sabin CHAIN
IPA Determination of the cleanroom suitability I IPA 2007.03TUV Environmenta Protection/Noise Control TUV 2007.04ATEX ATmospheres EXplosibles TUV Nord 2008.05
Surface Resistance Resistance level Korea Testing & Research institute 2007.09Single PPM National Certification Scheme of Single PPM Republic of Korea 2008.12
CPS CHAIN
CE Comunaute Europeenn(france) WITH TUV 2005.1
RoHS Restriction of Hazardous Substances Directive ( Pb, Hg, Cd, Cr6+, PBB/PBDE ) IN KOREA 2006.01
TUV Environmenta Protection/Noise Control TUV 2005.09Single PPM National Certification Scheme of Single PPM Republic of Korea 2008.12
ROBO-KIT RoHS Restriction of Hazardous Substances Directive (Pb, Hg, Cd, Cr6+, PBB/PBDE ) IN KOREA 2006.01
CPSFIX
RoHS Restriction of Hazardous Substances Directive (Pb, Hg, Cd, Cr6+, PBB/PBDE ) IN KOREA 2006.01
ATEX ATmospheres EXplosibles TUV Nord 2008.05VDE Verband Deutscher Elektrotrchniker e.V WITH VDE 2001.11UL Function & Safety Test by Underwriters Laboratories Inc UL 2002.12
Component, Material confidence Certificate of Reliability Republic of Korea 2009.01
CPSFLEX
UL Function & Safety Test by Underwriters Laboratories Inc UL 2002.12VDE Verband Deutscher Elektrotrchniker e.V VDE 2001.11
Component, Material confidence Certificate of Reliability Republic of Korea 2009.11
Oxygen Index Determine oxygen concentration Testing & Research Institute in Korea 2006.12SMOKE TOXIC (KN1322V0) Smoke toxicity test Commercial Testing Company 2002.08
ATEX Atmospheres Explosibles TUV Nord 2008.05flame retardant Test for level of flame JAPAN RAILROAD
Halogen Free Halogen free test IN KOREA 2002.11TOXIC (KN1322V0) TOXIC free test IN KOREA 2007.02UV (Color fastness) ultraviolet resistance test KIFLT 2005.05
RoHS Restriction of Hazardous Substances Directive (Pb, Hg, Cd, Cr6+, PBB/PBDE ) IN KOREA 2006.03
CE Comunaute Europeenn (france) WITH VDE 2001.11
Introduction of Company
EQUIPMENT
11
`
Process Equipment Unit Spec Picture
InjectionMachine
Removed moisture raw material(Pellet) inflows to cylinderthrough pipe -> melting 280 celsius degree ->metalic mold emission to being a part
1 120 ton 3 150 ton2 160 ton8 200 ton1 220 ton1 240 ton1 250 ton1 280 ton1 300 ton1 320 ton 2 350 ton
CoolingSystem
For keeping emission equipment oil temperature and metalic mold temperature, steadily cooling support system
1 40 RT 1 30 RT1 20 RT1 15 RT1 15 RT
(no use)5
OutdoorRadiator
air system of hot cooling system go through outdoor radiator -> temperature getting lower
6 Enjection 2 Extrusion 8 Extrusion
Cooling Water
Rotating along with cooling water line and gether hot water and discharge cooling water
4 ton Enjection oil 4 ton Metalic mold
cooling
2 more Extra use
Introduction of Company
EQUIPMENT
12
`
Process Equipment Unit Spec Picture
Hoper Driver
To remove moisture raw material which was flows from material drum, heating heaters -> ihe air injects to ventilation air equipment -> moisture evaporationNylon material general evaporation time: 4~6 hours
3 600 kg
2 300 kg1 250 kg2 200 kg4 100 kg
EvaporationOccured moisture in hopper driver ->filter moisture -> supply clear air
1 HCD-700 2 HCD-1802 HCD-100
Main Controller
Material movement time appointment -> emission, injection support hopper material sensor receipt -> instruction material according to this receipt in ordering
1 12 PIN/ejection
1 24 PIN/ejection
1 12 PIN/ extrusion
Compressure
During emission, Injection process, produce pressure air for material movement opening seosor and automatic winding equipment
1 20 HP/ejection 1 10 HP/ejection 1 10 HP/extrusion
Air dryer
When compression air working, automatically produced moisture->emission to outside through cooler and dryer
1 50 HT/ejection
1 20 HT/extrusion
Introduction of Company
13
`
EQUIPMENTProcess Unit Spec Picture
Temperaturesupport
22 MAX 180
ConveyorBelt
16 New type
6 Old type
Metalicmold
450 Using
30 Old version
Extrusion
1 80Ø-75hp
1 70Ø-80hp 1 70Ø-70hp 1 50Ø-40hp 1 60Ø-50hp
Auto-coiler
2 FLASH 700
전전
Process Unit Spec Picture
Winder
1 10~16Ø 1 07~16Ø 1 22~48Ø 1 56~90Ø
Printer
1white color
common use
4 only yellow color use
Motor
1 Ejection 1 Extusion
Hoist
2 2.8 ton
Folklift
1 클라크 1.5
1 클라크 2.0
전
Introduction of Company
SUBJECT
PRODUCT -. nsb chain (new sabin chain) -. ST chain (Shift chain) & zig - zag chain -. Revolving & Helix chain -. CPS FLEX (Tubes) -. CPS FIX (Connectors)
14
`
CP SYSTEM
15
`
CPS Product
■new sabin chain is a new generation cable chain with a new structure, which improved the existing sabin chain.■eliminate sound suring operation and takes “clean” to a whole new level with a Class 2 clean room certification.
■Designed one same sideband per one model is used and bending radius value(R) is decided by inserting Bending Radius units(BR unit)
■Can be applied to rotating or rotating machine■Control Banding Radius and Reverse Bending Radius automatically
■Screw motion in limited space
■ Halogen-Free■ UL, VDE certified.
■ Protect for Robot to prevent inside cable from twisting, damaging or breaking.
16
`
CR- TYPE / N-TYPE
nsb N-TYPE & ST N-TYPE ■ Designed to be more durable and more flexible than the
existing cable protection systems. It is a virtual wall around the inner chamber allowing for only necessary movement and creating flexibility options for machines which don’t track perfectly every time.
nsb CR-TYPE■Designed to meet the low noise and low dust demands of semiconductor production lines, LDC/PDP production lines, and any application where “clean” and “quiet” are a necessity.
17
`
ST_Sliding Type
ST-S TYPE (SKID) ST – RS TYPE (Roller SKID)
ST - ES Type (Enclose SKID) ST – ERS Type (Enclose, Roller, SKID)
1.Enclosed frame can be used in workplace with poor surroundings such as dusts , paints, welding place.
1. To minimizing the noise and making the ability of stable.2. It can have a more stronger durability compare with the previous cable chain by improving the structure of Side band.
1.To minimizing the frictional force resulted in disturbing from a SKID, we add the Roller.2. It is suitable for the long distance equipment with heavy weight of cable.
1. As applying the enclosed frame to ST-RS Type, the cable can be also protected from the any substance perfectly2. It is suitable for the long distance equipment with heavy weight of cable.
18
`
E-TYPE
nsb E-TYPE & ST E-TYPE ■ Designed to protect the inserted cables by forming a
complete enclosure which runs the entire length of the cable chain, resulting in total protection from outside impact or foreign particles.
19
`
nsb chain
QuieterTUV noise test- 30dB
The quieter cable chain in the world
GreenerIPA particle test- CLASS1
For clean room area (No include Pb, Cd, Hg, Cr+6, PBBs, PBDEs)
StrongerHigh quality raw material
Durability
Fast & Light weightCan be available until 15m/sec speed
PRICECompetitive price for customer with high quality
20
`
Structure differences_ nsb chain vs sb chain
nsb chain
21
`
nsb chain
Structure differences_ nsb chain vs sb chain
22
`
nsb chain
Structure differences_ nsb chain vs sb chain
23
`
nsb chain_Application
nsb chain
24
`
Electrostatic Discharge (ESD)
Successfully developed ESD for nsb-CR type!!!
According to the rapid progress of electricity, electron technical, high-integration,High tech equipment has to be progressed currently, CPSYSTEM has developed to protect in advance by any flame, explosion from any other materials.And electron technical circuit damage in the semiconductor production line and any loss from the error of computers, can be protected by using ESD product.
ESD cable chain for Clean room
For type of nsb20CR, nsb22CR, nsb28CR
nsb chain
25
`
Shift chain
ST chain_Characteristic
26
`
ST chain_Characteristic
Shift chain
27
`
ST chain_Characteristic
Shift chain
28
`
Shift chain _ Article Name
.N-TYPE
① Side Band (SB) No need link pin Connecting of each side band. Very simple & easy.
② Bending Radius Unit (BR)
Unique structure that the value of Bending Radius is decided by independent Bending Radius unit inserted
③ Divider(DV-S,R,M) To prevent cable from twisting by using DV/ S,M,R,T type.
④ Separator (SP) Divide the inserted cables horizontally, can be cut 5mm.
⑤ Frame (Hinge Type) Easy Hinge type and supports connection of both side of SB.
⑥ Frame Pin No Frame Pin for ST044N, ST055 but apply with ST072N, ST095N, ST120, ST1 50N
⑦ Free End Bracket Very effective to be able to be fixed at upper, lower and front direction with the use of FEB.
⑤ Support
Performed as a supporter of Skid and Roller Skid. It makes Skid and Roller Skid move up and down.
⑥ Skid, Roller Skid Roller mounted Skid and Roller un-mounted Skid.
S/RS-TYPE
E-TYPE 3
③ Frame (FRU, FRD)
Hinge type frame, open one side, supports connection of both side of side band
29
`
Shift chain _ N type
ST-N TYPE_Application
30
`
Shift chain _ N type
ST-N TYPE_Application
31
`
Shift chain _ N type
ST-N TYPE_Application
32
`
ST072RS_Application
Shift chain _ Sliding Type
33
`
ST095RS_Application
Shift chain _ Sliding Type
ST120RS_Application
34
`
Shift chain _ E type
Specification of ST-E type
Side Band N-Type / E-type same
FRU(D)
Hinge type
Hinge part is assembled RH direction of sideband
Ordering assembly is start from F.FEB to M.MEB
FEB
Free End Bracket type, side is enclosed
Top and Bottom can be enclosed by using subsidiary materials.
Other The FRU(D) which is assembled M.FEB & F.FEB is specially shaped (short length)
FRD(U) Assembly Ordering Start from F.FEB FRD(U) Dis-assembly Ordering Start from M.MEB
Caution !
35
`
Guide Channel
Sliding Type_Guide Channel_application example
BAD STATUS GOOD STATUS
▶Since the outer Height of guide channel is lower than the chain, guide can’t be the installation role.
▶When the chain moving, it can be possible to be break away▶Was not installed Dividers
▶As above image, bottom and top of chain is touch each other, it has enough outer height for guide role during moving▶Install Dividers
36
`
▶Guide channel is shorter than the chain. Accordingly, raised the load to the chain steadily.▶Continue raising the load and it can be broke.
▶Extension the guide channel length enough and it can be safety working.▶Installation Dividers
Sliding Type_Guide Channel_application example
Guide Channel
BAD STATUS GOOD STATUS
37
`
▶Despite of long distance, N-type chain application =>Possible to be chain load increased, make a noise, appeared particle. ▶Installation chain type: CPS095N
▶N-TYPE (Short distance, normal type)▶3~5 mt distance
▶Long distance type chain application – ST095S or CPS095S
▶ Installation Dividers
Sliding Type_Guide Channel_application example
Guide Channel
GOOD STATUSBAD STATUS
38
`
1. Purpose : For long stroke applications the guide channel is applied to ensure sliding type chain stays on track and to ensure safety during operation.2. Type : Steel Guide Channel, System Guide Channel, Stainless steel Guide Channel (Special order).
3. Comprehensive of Drawing
Division Material Chain seriesSteel Guide Channel Steel + zinc plating CPS, sb, ST chain S-type
System Guide Channel PA6+G.F30% (orange color) sb045S, 060S, 075S only => no more produce
Sliding Type_Guide Channel
Guide Channel
39
`
4. Application
▶ Single chain : FEB fixing place in the center distance
▶ Single chain : FEB fixing place in the edge of chain
▶ Double chain
Guide Channel
40
`5. A, B, C-Zone (Section)
6. Ordering Way: ex) ST-GCS 072S 100/ ABC :100M
Guide Channel
41
`
7. Installation Instruction of Guide Channel
① Guide Channel should be installed based on the drawing , will be horizontal and vertical and parallel with the direction of machine.
② Guide Channel connection parts should be exactly fitted and be sure that there’s no gap in the edge side.③ Install Tie-wrap at the edge of Fixing Point and Moving Point to fix tightly for cables.④ Installation place of Moving Bracket is to be authorized height.⑤ Installation regulation for GC and Shift chain should be observed below rules of tolerance.
<Rule of Tolerance> -. Tolerance limit of straight : ±2.0mm (About The Connection part of Each 2 M panel of Guide channel)-. Tolerance limit of Parallel : ±2.0mm (Between the part of Rail and the center of Guide Channel)-. Tolerance limit of Horizontality : ±2.0mm (About the bottom of Guide Channel)
※Maintenance and replacement for Guide Channel, please refer to assembly procedures.
Guide Channel
42
`
Regulation for assembly
Tension for insert cables
KEY POINT FOR INSERT CABLES
Good Status of inserted cables
Inserted cables should be same as above image regarding gravity's direction. Especially, when the starting place of bending, extra room must be existed.
Bad Status of inserted cables
Remarks If you installed as same as bad status as above without any consideration of gravity's direction or in case of installation close moving side of production, cables cycle time will be short, be damaged of cable chain itself and any accident occurrence.
43
`
Regulation for assembly
Straightness
The center of fixing & moving point of cable chain, should be same way.
1. The setting point of Fixing & Moving bracket should be conforminitied.2. When the 2 points is confiminity, straightness and degree of parallelization of cable chain is the most appropriate status.
Self-Supporting
Chain Lenght(LS/2) which forms straight under set-up condition of The chain and does not loose down depending on weight of inserted cables into the cable chain.
※ For practice, please refer to next page.
44
`
Regulation for assembly
EX.) ST044N.50.R50/F-5,000L
1.Cable W/T: About 4KG/mt2.LS/2 : About 1.2mt (1,200L)3.LP : 333mm4.Self-Supporting is OK
Self-supporting
45
`
Divider
DIVIDER M_S_T_R
TYPE DV/M DV/S DV/T DV/R
SHAPE
Function
▶Fix inserted cable's position.
▶Locking separators.
▶Both side of chain
▶Fixing the end part of separator.
▶Necessary over 250mm frame width
▶2 DV/T-PIN is required per 1 DV/T
▶Protect from side impact.
▶Strengthen the frame for resistance of downward force
S/P
▶Combine use of Dividers
▶Diversity & Functionality combine.
← Separator Pin (SP-Pin)
46
`
Divider
Divider_Installation
To extend the lifetime of cables and protect the twisting inserted cables,Keep at least 10% of space between the inserted cables.To center and balance each inserted cable, Dividers and separators are necessary.
★For round cable : 10% of the cable diameter★For Hose & Tube : 20% of the hose, tube diameter
Ex.) When you install ST120.500.R…, you can design inner section as this drawing.
DV/T 2 PCS + DV/TP 4 PCS DV/M 2 PCS DV/S 2 PCS
47
`
Shift chain
Steel Insert
■ FEB is very effective in a way that can be mounted up, down and front side just like nsb chain.
■ For extra enhance, steel washer can be inserted into the fixing hole.
Upper Horizontal Lower
Free End Bracket
Diverse Bending Direction
48
`
BRACKET
TYPE EEB NEB FEB (N-type) FEB (E-type) SEB Attach SteelMeaning Easy End Bracket Normal End Bracket Free End Bracket Free End Bracket Steel End Bracket Steel End Bracket
Picture
Material PA6+G.F33% PA6+G.F33%+Steel Direction B0 B1
B1
Ex)
Direction
B2 B2
Ex)
Direction B3
Ex)
Purpose-Install edge of the each chain to fix tightly on the body of machine
49
`
BRACKET
Bracket HOLE Comparison for ST FEB vs CPS NEB(SEB), EEB(B0) ST CPS FEB Dimension ( :NEB(SEB) hole / EEB hole)
ST044N CPS036N SameAboveBottomFront
ST055N CPS050N SameAboveBottomFront
ST072NCPS068N
None None
CPS077N Same None
ST095N CPS095N SameFront same//
Above, bottom is same only 2 place
ST120N CPS120N SameAboveBottomFront
When you replace from CPS to ST chain, please check below bracket Hole place.
50
`
IGUS TO CPS
Comparison Check List
1. Check I/W, O/W, I/H, O/H, H.
2. Decide suitable model.
3. Inner Height comparison is most important.
4. For example, you can practice as the follows.
MFG ITEM Inner Width Outer Width Inner Height Outer Height Height
IGUS 255.07.125 77 93.2 24 35 285
CPS ST044N.75.R120 75 96 26 38 278
MFG ITEM Inner Width Outer Width Inner Height Outer Height Height
IGUS 255.07.150 77 93.2 24 35 335
CPS ST044N.75.R150 75 96 26 38 338
Ex.1)
Ex.2)
51
`
ROBO-KIT
■Used in the robotic application
■Prevent the cables from twisting,
damaging or breaking.
■ Leads the movement of cables
■ Minimize the friction and interference
■ Make life spand of cable prolonge
■ Robot move freely.
52
`
Installation
ROBO-KIT
53
`
Composition of UNIT
ROBO-KIT
54
`
Composition of UNIT
ROBO-KIT
55
`
Check List for Installation on site
ROBO-KIT
56
`
Application
ROBO-KIT
57
`
HELIX Chain
HX3553/6075-TypeHX3553/6075-Type
Applied to the application with a spiral rotary motion in limited space such as 360 degree revolution robots, rotating machine.
When to use Helix chain- Intent to use the cables & hoses on both sides.- Require rotation speed up to 8m/sec.
HX6075
58
`
PART DESCRIPTION
HELIX Chain
59
`
Check List for Installation on site
HELIX Chain
60
`
INSTALLATION
HELIX Chain
61
`
INSTALLATION
HELIX Chain
62
`
APPLICATION
HELIX Chain
63
`
APPLICATION
HELIX Chain
64
`
REVOLVING Chain
RV020CR/RV028CR/RV040CR/RV020CR/RV028CR/RV040CR/RV048CRRV048CR
Free Banding Radius System
▶Automatically control the bending radius and reverse bending radius▶Maximize the mobility of bending radius▶Apply to the rotating Machine or Robot▶Low dust and low noise realization▶Improve the productivity by more secured cable protection system
65
`
3
4
Divider & Separator : Protect from twisting, shearing, and breaking.
1 Easy Bracket Improved the end bracket by making it possible to mount the cable chain from the front, side, bottom, or top.
2 Side BandConnection as much as you want,No noise and eliminating all points of friction.FrameSmoothed out to ensure maximum protection for your cables.
5 Stopper : Control the divider position and lock the inserted cable grid in place during operation.
6 Ball Caster : help to facilitate smooth and quiet movement of the cable chain.
•RV020CR do not apply Ball caster, Divider and Stopper.
There are two installation choices, A or B corresponding with the bendingradius of the side band.
PART DESCRIPTION
REVOLVING Chain
66
`
1. According to the radius of Side Band, type is divided into A and B
2. When the distance is restriction of inner radius (R, R’) and reverse radius (L, L’), type is divided
into A and B
TYPE - A TYPE - BTip !!If the dimension of R,R’ is too big or rotating over 270 degree, the chain should be fixed at inner side guide.
A or B type
REVOLVING Chain
67
`
Length decision calculation
L The Length of chain LS Total stroke, total traveling distance of the equipment
LS/2 The half of total stroke LP Loop length P Length of each pitch R Re Bending radius of chainIR Inner radiusOR Outer radius
L=LS/2 + LPLS/2=π X Or X rotating angle/360LP=π{(Ir+Or)/6+R}
REVOLVING Chain
68
`
Application
REVOLVING Chain
69
`
ZIG-ZAG chain
ZIG-ZAG Chain Drawing
■USE FOR:
Effectively protect cables for the Up & Down moving application.
■CP, ST N-type is machining for the bending point of each side
70
`
Check Point to install
1. Floor chain length: How length is straight put on the floor.
2. Restrict Height: When the chain is totally folding like number 2, Height should be figured out.
3. Total Stroke: When the chain is straightly stand up, total length.
4. Cable quantity, weight
ZIG-ZAG chain
71
`
KEEP GOING PRODUCING
New Sabin CR nsb 020CRnsb 022CRnsb 028CRnsb 035CRnsb 045CRnsb 060CRnsb 075CR
New Sabin N nsb 028Nnsb 035Nnsb 045Nnsb 060Nnsb 075N
New Sabin E nsb 028Ensb 035Ensb 045Ensb 060Ensb 075E
CPS MINI TypeCPS 015CPS 020CPS 030CPS 033
Shift N ST 044NST 055NST 072NST 095NST 120NST 150NShift E ST 044EST 055EST 072EST 095EST 120EST 150EShift S ST 044SST 072SST 095SST 120SST 150SShift RS
ST 044RS ST 072RS ST 095RS ST 120RS ST 150RS Shift ES
Shift ERS
RevolvingRV 020CRRV 028CRRV 040CRRV 048CR
RV 060CR->DiscontinuedHelix
HX 3553HX 6075
HX 6087->Discontinued
Sabin CR sb 018CRsb 020CRsb 025CRsb 035CRsb 045CRsb 060CRsb 075CRSabin N sb 028Nsb 035Nsb 045Nsb 060Nsb 075NSabin E sb 028Esb 035Esb 045Esb 060Esb 075ESabin S sb 045Ssb 060Ssb 075Ssb 100S
CPS MEDIUM CPS 036NCPS 036
CPS 050NCPS 050CPS N
CPS 068NCPS 077NCPS 095NCPS 120N
CPS SLIDING CPS 036SCPS 068SCPS 077SCPS 095SCPS 120S
CPS ENCLOSED CPS 036ECPS 050E
DISCOUNTINUED PRODUCING
New!New!New!New!
Adobe Acrobat Document
72
`
CPSFLEX
SERIES
CPS PAH POH PAR
PES PPS CPSS PPSS
Toxic free & RoHSEco-friendlyVDE, UL certified
73
`
CPSFIX
SERIES
74
`
CPSFIX
SERIES
75
`
LEVEL Test Procedure in Brief The flame must be went out within Absorbent cotton flame
UL 94V-0 Step1. Burn a Specimen during 10sec 10 sec Not Permit
UL 94V-1 Step2. Put away burner 30 sec Not Permit
UL 94V-2 Step3. Check the seconds for specimen 30 sec Permit
UL 94V-5V go out the flame itself 60 sec
Test for Flammable Type of Test method Meaning Test Detail
UL 94
UL 94HB(Horizontal Burning Test)
Put a Specimen as horizontal direction and burning test Valuate the burning length during 1 minute
UL 94V(Vertical Burning Test)
Put a Specimen as Vertical direction and burning test
The flame must go out by itself within regulated minutes
■ Below Information is summarized of all test procedure.
Non Combustible
CPSFIX
76
`
CPSFLEX & CPSFIX
Application _ Hover Train in Korea
77
`
CPSFLEX & CPSFIX
HYUNDAI-ROTEM
•Subway Line2, LINE3, LINE9(SEOUL,KOREA)
• Subway Line1, LINE2 (IN-CHEON, KOREA)
• RAV Electric Locomotive(CANADA)
• Electric Locomotive(ISTANBUL, TURKEY)
• Electric Locomotive(SINGAPORE)
• Subway LINE4(SAUPAULO, BRAZIL)
• Electric Locomotive(TUNISIA)
• High-speed Train(MALAYSIA)
• Airport Train(IN-CHEON, KOREA)
• Wellington Electric Locomotive(NEW ZEALAND)
• KTX-High-speed Train(KOREA)
• RS3 Electric Locomotive(INDIA)
• Magnetic Levitation Train(KOREA)
• Electric Locomotive(MARMARA, TURKEY)
78
`
2D & 3D user guide
www.cpsystem.co.kr1. Enter our homepage and you can see main screen. Then, click “England” language as below.
2. Please click “Auto-cad drawing” bar in the right side of the screen.
Auto-cad drawing
3. You can get “drawing” or “Dnf” or “web 3D” file according to your choice.
Tip! Special drawing for your customer, please request to headquarter directly.
79
`
-Thank you for your attention and for more detail information, please enter our website homepage or inquire to headquarter. We are doing our best to be a world best with you.-