Download - Flanged Bearing Tail Pitch Slider 01

Tail Pitch Slider 01[H0055BM]

Bearing 5x 10x4mm(HC411-S)

Uniball M2.5x 5H6(H0064-S)

Tail Rotor Hub Assembly

Tail Blade GripAssembly

Tail Pitch Slider Link Assembly

Tail Pitch Slider Link Assembly

Tail Pitch SliderAssembly

H08

26M

_rev

01

Tail Pitch Slider Link(H0261-S)

Tail Blade Grip(H0327BM-S)

Flanged Bearing 8x 12x3.5mm

(HC418-S)

Tail Pitch Slider 02(H0407-S)

Spacer 8.1x 9.2x3.2mm

[H0029]

Tail Pitch Slider 03[H0054]

Tail Pitch Slider Assembly

Oring(HC335-S)

Tail Shaft(H0325-S)

Tail Rotor Hub Assembly

Spacer 5x 9x0.75mm(H0330-S)

Thrust Bearing5x 10x4mm

(HC435-S)

Bearing5x 10x4mm

(HC411-S)

Socket Head CapScrew M2x6mm(HC004-S)

Button Head Cap Screw M4x6mm(HC096-S)

Note: Smaller ID

Note: Larger ID

Spacer7.5x 10x0.5mm

(H0349-S)

Socket Head CapScrew M2x6mm(HC004-S)

Spacer2x 3x3mm

(H0076-S)

Note: S >> Left Side

Note: S >> Right Side

Note:It is a normal for the tail to feel a bit tight after initialassembly as the tail spindle preload is ussually high whenthe helicopter is brand new. The preload will loosen upafter 2-5 flights allowing the system to become smooth.

Spindle Shaft(H0329-S)

eg: Microlube GL261

eg: Microlube GL261

TAIL ROTOR [H0826-K]

Please read this user manual carefully, it contains instructions for the correct assembly of the KIT.Please refer to the website www.goblin-helicopter.com for updates and other important information. Thanks You.