How To Install A Wireless NIC:

Ryan Parish

Step 1:

• First, you will need to choose the right NIC card that you are installing.

Step 2:

• Now you will need to choose ‘Autorun’ to install the programme.

Step 3:

• You will then need to choose to ‘Repair’ the programme.

Step 4:

• Now you will need to wait for the programme to install.

Step 5:

• Once you have done this, you will then need to choose your network from the list.

Step 6:

• It will then say that you are connected to the network of your choice.

Step 7:

• Once you have done that, you will have this appear showing that you are connected to a network meaning you have successfully installed you Wireless NIC.

The Following Are Five Ways OfTesting To See If You Have

InstalledIt Correctly:

PING:

INTERNET:

DEVICE MANAGER:

DRIVER SOFTWARE:

COMMAND PROMPT: