• First, you will need to choose the right NIC card that you are installing.
Step 2:
• Now you will need to choose ‘Autorun’ to install the programme.
Step 3:
• You will then need to choose to ‘Repair’ the programme.
Step 4:
• Now you will need to wait for the programme to install.
Step 5:
• Once you have done this, you will then need to choose your network from the list.
Step 6:
• It will then say that you are connected to the network of your choice.
Step 7:
• Once you have done that, you will have this appear showing that you are connected to a network meaning you have successfully installed you Wireless NIC.
The Following Are Five Ways OfTesting To See If You Have