Monode Stencil Paper
This paper is formulated to have the capability for typing or printing on it in the field.
Very popular for variable stencil data in the field such as serial numbers.
Depending on the paper Monode has a few ways to convert the product for best use in the field.
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
Monode Stencil Paper-Die Impression
Style of Paper Color ColorPart Number Part Number Size
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Die Impression- Sheet
1 ½” X 100’
1 ½” X 200’
1 ½” X 300’
1 ½” X 400’
1 ½” X 500’
1 ½” X 600’
2 ½” X 20’
2 ½” X 100’
2 ½” X 200’
2 ½” X 300’
1 ½” X 20’
3 ¾” X 7’
2 ½” X 7’
Die Impression- Sheet
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
DIB-27
DIB-37
DIB-120
DIB-1100
DIB-1200 DIG-1200
DIB-1300 DIG-1300
DIG-1100
DIG-120
DIG-27
DIG-37
DIB-1400 DIG-1400
DIB-1500 DIG-1500
DIB-1600 DIG-1600
DIB-220
DIB-2100 DIG-2100
DIG-220
DIB-2200
DIB-2300 DIG-2300
DIG-2200
Die impression stencils are a popular way to order this paper this allows stencils with your trademark or other repetitive data on roll or flat stencils, spaced at convenient increments,
to enable you to add (with typewriter or Monode Stencil Cutting Typewriter) extra information, such as part number, heat treat code, sizes, etc., as needed. Die impression is available
with and without logos in rolls or boxed in sheets.
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
* For custom Die Impression email or call for quote.
Style of Paper Color ColorPart Number Part Number Size
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Green
Green
Green
Green
Green
Green
Green
Green
Die Impression- Sheet
3 ¾” X 20’
3 ¾” X 100’
3 ¾” X 200’
3 ¾” X 300’
3 ¾” X 500’
3 ¾” X 600’
3 ¾” X 400’
2 ½” X 600’
Die Impression- Sheet
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
Die Impression- Roll
DIB-2600
DIB-320
DIB-3100
DIB-3200
DIB-3300
DIB-3400
DIB-3500
DIB-3600
DIG-2600
DIG-320
DIG-3100
DIG-3200
DIG-3300
DIG-3400
DIG-3500
DIG-3600
Blue
Blue
Green
Green
2 ½” X 400’
2 ½” X 500’
Die Impression- Roll
Die Impression- Roll
DIB-2400 DIG-2400
DIB-2500 DIG-2500
Monode Stencil Paper-Die Impression
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
Tractor fed is a very popular use for some of the computer controlled stencil cutting machines.
This paper comes in three styles: • TF - A light duty paper for shallow etch applications. This is blue in color. • TFB - This is a heavier duty paper used for both shallow etch applications and some deep etch applications. This paper is blue in color. • TFG - This paper has the same quality as the TFB above with the difference of a translucent green color.
Monode Stencil Paper- Tractor Fed
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Green
Green
Green
Green
Green
Green
Green
2 ½” X 20’
2 ½” X 100’
2 ½” X 200’
2 ½” X 300’
2 ½” X 400’
2 ½” X 600’
2 ½” X 500’
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
TFB-220
TFB-2100
TFB-2200
TFB-2300
TFB-2400
TFB-2500
TFB-2600
TFG-220
TFG-2100
TFG-2200
TFG-2300
TFG-2400
TFG-2600
TFG-2500
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Green
Green
Green
Green
Green
Green
Green
Heavy Duty Tractor Fed
3 ¾” X 20’
3 ¾” X 100’
3 ¾” X 200’
3 ¾” X 300’
3 ¾” X 500’
3 ¾” X 600’
3 ¾” X 400’
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
Heavy Duty Tractor Fed
TFB-320
TFB-3100
TFB-3200
TFB-3300
TFB-3400
TFB-3500
TFB-3600
TFG-320
TFG-3100
TFG-3200
TFG-3300
TFG-3400
TFG-3500
TFG-3600
Style of Paper Color ColorPart Number Part Number Size
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
Style of Paper Color ColorPart Number Part Number Size
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
TF3 ¾ X 200’
TF3 ¾ X 100’
TF3 ¾ X 300’
TF3 ¾ X 400’
TF3 ¾ X 500’
TF3 ¾ X 600’
TF6 x 20
TF6 x 100
3 ¾ X 200’
3 ¾ X 100’
3 ¾ X 300’
3 ¾ X 400’
3 ¾ X 500’
3 ¾ X 600’
6 x 20
6 x 100
Blue
Blue
Blue
Blue
Blue
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
Light Duty Tractor Fed
TF6 x 200
TF6 x 300
TF6 x 400
TF6 x 500
TF6 x 600
6 x 200
6 x 300
6 x 400
6 x 500
6 x 600
Monode Stencil Paper- Tractor Fed
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com
Monode Stencil Paper-Thermal
Style of Paper Color Part Number Size
WhiteThermalPaper
METHERMOSTENW
Printer Part Number
ThermalPrinter
METHERMO
High quality etch solution for your serializing, 2D or low volume application. Designed for the complexelectrochemical etch marking applications in aerospace that use 2D or UID specifications. This unit is the benchmark for customers who require the flexibility of on site stencil cutting with the high qualitystandars of a photo process stencil.
Available Marking Area - Send drawing or sketch with dimension. If mark is on radius, show both I.D. and O.D. of marking area. Make allowances for bevels, chamfers, radii, etc. which limit the marking area. Double-check references to diameter vs. radius. If pitch diameter or pitch radius is shown, be certain that character height allows space above and below legend.
Position of Mark in this Area - Indicate on above sketch if mark is to be centrally located, or nearer O.D., or nearer I.D.. Also indicate limitation such as spacing of bolt-holes, shoulders or other interferences.
Over-All Size of Mark - Distinguish between marking area, and size of mark.
Style and Height of Each Line - Distinguish the style and height of each line of lettering, figures, etc. With desired SPACE BETWEEN LINES.
Exact Legend - Paying particular attention to commas, dashes, extra spaces, periods or noperiods in legends like U.S.A., USA, PSI, etc. DO NOT USE QUOTATION MARKS, or PARENTHESESin legend sketch, UNLESS YOU WANT THEM TO APPEAR IN THE LEGEND.
Indicate on Sketch the Direction of Legend with relation to length of stencil as well asLOCATION of LEGEND. (On Die-impression stencils, will additional material be typed AFTER the mark or under the mark?)
Number of Times Mark is to Appear on Stencil - When several marks are to appear on a single stencil show desired location of marks on sketch. (Allow room for masking between marks. It is poor economy to place marks so close that only every second mark may be used.)
Approximate vs. Exact Spacing between marks. Unless specifically requested, duplicate marks on flat stencils, and spacing between marks on roll stencils, will be plus or minus 1/4”. If jigs or fixtures are used to mark several parts at one time, it will be necessary to prepare art work to exactly fit the fixture. Pairs, trios or sets of 4 will then be placed on stencils at reasonablespaced intervals. Send sketch with dimensions of proposed or prevailing fixtures.
Observance of the requirements shown on this checklist will expedite delivery of stencils which you can use in production as soon as received. Beautifully made stencils, promptly
delivered, do not make friends if some significant detail is overlooked.
How To Order Custom Made Stencils
9200 Tyler Boulevard • Mentor, OH 44060 • Phone: (440) 975-8802 • Fax: (440) 975-1364Email: [email protected] • www.monode.com